abv [Thu, 7 May 2015 05:53:38 +0000 (08:53 +0300)]
0026146: Visualization, Select3D_ISensitivePointSet - eliminate crash when clearing selections [only with TBB]
Remove classes Select3D_ISensitivePointSet and Select3D_BoundarySensitivePointSet; use Select3D_SensitivePoly directly for boundary selection.
Make last argument in Select3D_SensitiveFace non-default to ensure that value is always explicitly specified by the caller.
Inherit SelectMgr_FrustumBuilder from Standard_Transient to use normal Handle instead of NCollection_Handle.
vpa [Thu, 7 May 2015 15:53:21 +0000 (18:53 +0300)]
0026147: Visualization - restore the ability to pick only fully included objects in rectangular selection
2 modes of rectangular selection are available: inclusion-only and overlap-allowing;
The modes can be switched using method AllowOverlapDetection from StdSelect_ViewerSelector3d;
BVH for sensitive entities now builds if there is more than max number of leafs in collection;
Added option -allowoverlap to command vselect;
Interactive rectangular selection in Draw is now available in 2 modes:
- if the user starts selection from upper corners, only fully included objects will be selected;
- if the user starts selection from lower corners, both partially and fully overlapped objects will be selected.
vpa [Wed, 6 May 2015 12:35:36 +0000 (15:35 +0300)]
0026159: Visualization - revise tolerance implementation for selection
Max tolerance is now applied to all objects and entities by default;
if there is an entity with a lower tolerance, selecting frustum will be recalculated for it.
The ability to set sensitivity for each entity individually is moved to protected section of SelectBasics_SensitiveEntity
SetPixelTolerance from AIS_InteractiveContext now sets custom tolerance that is applied to all sensitives.
Added -unset option to vselprecision command to disable custom tolerances.
Test case for issue #26159
kgv [Wed, 6 May 2015 13:05:47 +0000 (16:05 +0300)]
0026165: Visualization, TKOpenGl - fix FBO blitting on some mobile devices
OpenGl_Texture::Init() - initialize FBO textures with GL_TEXTURE_WRAP_ set to GL_CLAMP_TO_EDGE,
since some devices do not support GL_REPEAT (which is default) in such combination.
OpenGl_Font::createTexture() - define texture parameters explicitly.
OpenGl_FrameBuffer::Init() create Depth render buffer object instead of texture
on devices which do not support GL_DEPTH24_STENCIL8.
1. Function IntImp_Int2S::ChangePoint() has been added (see cdl for detail information).
2. Attempt to forbidden break WLine if it goes along surface boundary.
1. Develop special sewing algorithm.
2. DRAW-command "fastsewing" has been created (see help for detail information).
3. BRepLib::EnsureNormalConsistency() method has been added (see help for detail information).
4. DRAW-command correctnormals has been created (see help for detail information).
Technical overview refactored; text duplicating information contained in user guides removed.
Some images are regenerated for better presentation.
Problems with formatting and section tags corrected in user guides.
isk [Tue, 5 May 2015 08:06:29 +0000 (11:06 +0300)]
0022785: Draw Harness - add possibility to remove a text drawn by the command vdrawtext
AIS_TextLabel - new public class to display simple text labels (based on MyTextClass private class from Draw Harness).
ViewerTest::Display() - add more reliable replacement for VDisplayAISObject() with no viewer update flag.
vdrawtext command redesign:
- Use new AIS_TextLabel class instead of private MyTextClass.
- Take object name and allow to clear labels from the Viewer.
- Use parameter name + parameter value syntax instead of strict list of mandatory arguments.
- Use [0; 1] range for colors and accept names.
- Drop redundant argument "isMultiByte".
- Support argument -noupdate to skip Viewer update.
0026138: Problems with writing periodic BSplines into IGES
Remove making BSpline surfaces rational,
Add shifting of pcurves on periodic BSpline surfaces,
Add cutting of segment from such surfaces.
Add additional check for need of make segment
Update of test-cases according to the new behavior
Calculate radius of circumcircle as maximum difference between its center and vertices or reference triangle.
Draw test command OCC25547 has been implemented.
Small optimizations for speed.
Update of test-cases according to the new behaviour
New features:
class BOPTools_AlgoTools2D
method:
Standard_Integer BOPTools_AlgoTools2D::AttachExistingPCurve
(const TopoDS_Edge& aEold,
const TopoDS_Edge& aEnew,
const TopoDS_Face& aF,
const Handle(IntTools_Context)& aCtx)
has been added.
Purpose:
To attach P-Curve on surface of the face <aF> from the edge <aEold>
to the edge <aEnew>
It returns 0 in case of success.
Method Extrema_GenExtCC::Perform() refactored to avoid very inefficient (O(N^2)) algorithm of removal of duplicate points at the end. Instead, duplications are checked when new points are added.
Fields are initialized in constructors of the class Extrema_GenExtCC; unused instances of generic classes (duplications) ELCC and ELCC2d removed.
0026025: Visualization, TKOpenGl - stereoscopic output does not work
OpenGl_View::Render() - pass target FBO as parameter.
OpenGl_Context - revise Read/Write buffers management logic, taking into account FBOs.
Graphic3d_Camera::UpdateProjection() - setup LProjection and RProjection
the same as MProjection in case of Projection_MonoLeftEye/Projection_MonoRightEye
for API consistency.
0026080: Wrong result obtained by General Fuse operator.
Changes:
class IntTools_FClass2d
- method:
TopAbs_State IntTools_FClass2d::Perform
(const gp_Pnt2d& _Puv,
const Standard_Boolean RecadreOnPeriodic) const
has been changed.
The value of tolerance
For the value of tolerance for classification,
the minimum (among UResolution, VResolution) value is used.
azv [Tue, 20 Jan 2015 14:06:03 +0000 (17:06 +0300)]
0024285: Updates of PLib::EvalPolynomial for code acceleration
Functions PLib::EvalPolynomial and PLib::NoDerivativeEvalPolynomial are refactored to allow generation of faster code:
1. Iteration by degree is made in outer loop
2. Avoided pointer arithmetic
3. Recursive templates are used to expand loop by dimension in specific cases (1-15)
0026098: The result of General Fuse operation is self-interfered shape
class BOPTools_AlgoTools
method static Standard_Real IntersectCurves2d(const gp_Pnt& aPV,
const TopoDS_Face& aF,
const Handle(Geom_Surface)& aS,
const TopoDS_Edge& aE1,
const TopoDS_Edge& aE2)
Check the validity of the 2d intersection before applying the result.
0025959: Draw Harness - do not turn on Z-clipping implicitly by mouse ring
Clipping planes now can not be switched on by mouse ring or both right and left mouse buttons. To do this, user has to press certain button or call certain command.
0025672: V3d_View::ConvertToGrid doesn't work for grid if the grid plane's origin is not identical to camera origin.
Patched V3d_View::ConverToGrid method to fix the problem
Added test function "vprivilegedplane" for setting/printing grid plane's coordinate system
Added test case bugs/vis/bug25672 to check the issue
remarks from kgv
Warnings eliminating (similar to CR25671)
0025671: V3d_View::Convert doesn't work as expected in GRID active mode.
Removed code of converting coordinates to grid in V3d_View::Convert, ::ConvertWithProj methods.
Added test case verifying MoveTo with activated grid and testing V3d_View::Convert, ::ConvertWithProj methods.
Added new test command "vconvert" for testing the conversion methods.
0025783: Visualization - allow Z-layer to draw 2D objects and to make it alternative to Overlay and Underlay
Add one more pre-defined Z-layer Graphic3d_ZLayerId_BotOSD.
Define new Transformation Persistence flags Graphic3d_TMF_2d and Graphic3d_TMF_2d_IsTopDown
for displaying objects in screen coordinates.
Anchor point defines angle of the screen to display the object in similar way as for Graphic3d_TMF_TriedronPers.
Extend Draw Harness command vdisplay with new options:
-overlay as alias for -toposd.
-underlay and -botosd.
-noselect to prevent automatic selection activation.
-dispMode and -highMode to define displaying and highlighting modes.
-2d, -2dtopdown and -3d to manage displaying in screen coordinates.
-trsfPers and -trsfPersPos for Transformation Persistence options.
projects / occt.git / log