0022459: The ImportExport sample crash

diff --git a/samples/mfc/standard/01_Geometry/src/GeomSources.cpp b/samples/mfc/standard/01_Geometry/src/GeomSources.cpp
index c78f840..12b8f81 100755 (executable)
--- a/samples/mfc/standard/01_Geometry/src/GeomSources.cpp
+++ b/samples/mfc/standard/01_Geometry/src/GeomSources.cpp
@@ -575,7 +575,7 @@ void GeomSources::gpTest8(CGeometryDoc* aDoc)
 Standard_Real radius = 5;                          
 Handle(Geom2d_Circle) C =                          
     new Geom2d_Circle(gp::OX2d(),radius);          
 Standard_Real radius = 5;                          
 Handle(Geom2d_Circle) C =                          
     new Geom2d_Circle(gp::OX2d(),radius);          

-Standard_Real param = 1.2*PI;                      
+Standard_Real param = 1.2*M_PI;                      

 Geom2dLProp_CLProps2d CLP                          
     (C,param,2,Precision::PConfusion());           
     gp_Dir2d D;                                    
 Geom2dLProp_CLProps2d CLP                          
     (C,param,2,Precision::PConfusion());           
     gp_Dir2d D;                                    


@@ -630,8 +630,8 @@ Standard_Real radius = 5;
 Handle(Geom2d_Circle) C =                                    
     new Geom2d_Circle(gp::OX2d(),radius);                    
 Geom2dAdaptor_Curve GAC (C);                                 
 Handle(Geom2d_Circle) C =                                    
     new Geom2d_Circle(gp::OX2d(),radius);                    
 Geom2dAdaptor_Curve GAC (C);                                 

-Standard_Real startparam = 10*PI180;                                
-Standard_Real abscissa = 45*PI180;                                  
+Standard_Real startparam = 10*M_PI/180;                                
+Standard_Real abscissa = 45*M_PI/180;                                  

 gp_Pnt2d P1;
 C->D0(startparam,P1);                                                
 // abscissa is the distance along the curve from startparam  
 gp_Pnt2d P1;
 C->D0(startparam,P1);                                                
 // abscissa is the distance along the curve from startparam  


@@ -1190,7 +1190,7 @@ Standard_Real ang = D1.Angle(D2);                \n\
     cout<<" D1.Angle(D2) : "<<ang<<endl;
 
     TCollection_AsciiString Message2 (ang);
     cout<<" D1.Angle(D2) : "<<ang<<endl;
 
     TCollection_AsciiString Message2 (ang);

-       TCollection_AsciiString Message3 (ang/PI180);
+       TCollection_AsciiString Message3 (ang/M_PI/180);

        
        Message += " ang =  "; 
        Message += Message2; 
        
        Message += " ang =  "; 
        Message += Message2; 


@@ -1475,8 +1475,8 @@ gp_Pnt2d P1(-184, 101);
 gp_Pnt2d P2(20 ,84);                        
 Standard_Real aheight = 1;                  
 FairCurve_Batten B (P1,P2,aheight);         
 gp_Pnt2d P2(20 ,84);                        
 Standard_Real aheight = 1;                  
 FairCurve_Batten B (P1,P2,aheight);         

-B.SetAngle1(22*PI180);                      
-B.SetAngle2(44*PI180);                      
+B.SetAngle1(22*M_PI/180);                      
+B.SetAngle2(44*M_PI/180);                      

 FairCurve_AnalysisCode anAnalysisCode;      
 B.Compute(anAnalysisCode);                  
 Handle(Geom2d_BSplineCurve) C = B.Curve();  
 FairCurve_AnalysisCode anAnalysisCode;      
 B.Compute(anAnalysisCode);                  
 Handle(Geom2d_BSplineCurve) C = B.Curve();  


@@ -1512,8 +1512,8 @@ gp_Pnt2d P1(-184, 41);
 gp_Pnt2d P2(20 ,24);                            
 Standard_Real aheight = 1;                      
 FairCurve_MinimalVariation MV (P1,P2,aheight);  
 gp_Pnt2d P2(20 ,24);                            
 Standard_Real aheight = 1;                      
 FairCurve_MinimalVariation MV (P1,P2,aheight);  

-MV.SetAngle1(22*PI180);                         
-MV.SetAngle2(44*PI180);                         
+MV.SetAngle1(22*M_PI/180);                         
+MV.SetAngle2(44*M_PI/180);                         

                                                 
 FairCurve_AnalysisCode anAnalysisCode;          
 MV.Compute(anAnalysisCode);                     
                                                 
 FairCurve_AnalysisCode anAnalysisCode;          
 MV.Compute(anAnalysisCode);                     


@@ -2316,7 +2316,7 @@ Standard_Real major = 12;
 Standard_Real minor = 4;                                                
 gp_Ax2d axis = gp::OX2d();                                              
 gp_Elips2d EE(axis,major,minor);;                                           
 Standard_Real minor = 4;                                                
 gp_Ax2d axis = gp::OX2d();                                              
 gp_Elips2d EE(axis,major,minor);;                                           

-Handle(Geom2d_TrimmedCurve) arc = GCE2d_MakeArcOfEllipse(EE,0.0,PI/4);  
+Handle(Geom2d_TrimmedCurve) arc = GCE2d_MakeArcOfEllipse(EE,0.0,M_PI/4);  

                                                                         
 //==============================================================
     TCollection_AsciiString Message (" \
                                                                         
 //==============================================================
     TCollection_AsciiString Message (" \


@@ -2337,7 +2337,7 @@ Handle(Geom2d_TrimmedCurve) arc = GCE2d_MakeArcOfEllipse(EE,0.0,PI/4);  \n\
     aDoc->GetISessionContext()->Display(aCurve, Standard_False);
     Handle(ISession2D_Curve) aCurve2 = new ISession2D_Curve(arc);
     aDoc->GetISessionContext()->Display(aCurve2, Standard_False);
     aDoc->GetISessionContext()->Display(aCurve, Standard_False);
     Handle(ISession2D_Curve) aCurve2 = new ISession2D_Curve(arc);
     aDoc->GetISessionContext()->Display(aCurve2, Standard_False);

-       TCollection_AsciiString Message2 (PI);
+       TCollection_AsciiString Message2 (M_PI);

     Message += " PI = ";Message+= Message2;
     PostProcess(aDoc,ID_BUTTON_Test_32,TheDisplayType,Message.ToCString());
 }
     Message += " PI = ";Message+= Message2;
     PostProcess(aDoc,ID_BUTTON_Test_32,TheDisplayType,Message.ToCString());
 }


@@ -2656,7 +2656,7 @@ Standard_Real radius = 3;
 Handle(Geom_Circle) circle =                                                        
     GC_MakeCircle(centre,axispoint,radius);                                         
                                                                                     
 Handle(Geom_Circle) circle =                                                        
     GC_MakeCircle(centre,axispoint,radius);                                         
                                                                                     

-Handle(Geom_Geometry) aRotatedEntity  = circle->Rotated(gp::OZ(),PI/4);             
+Handle(Geom_Geometry) aRotatedEntity  = circle->Rotated(gp::OZ(),M_PI/4);             

 Standard_CString aRotatedEntityTypeName = aRotatedEntity->DynamicType()->Name();        
                                                                                     
 Handle(Geom_Geometry) aMirroredEntity = aRotatedEntity->Mirrored(gp::ZOX());        
 Standard_CString aRotatedEntityTypeName = aRotatedEntity->DynamicType()->Name();        
                                                                                     
 Handle(Geom_Geometry) aMirroredEntity = aRotatedEntity->Mirrored(gp::ZOX());        


@@ -2724,7 +2724,7 @@ Standard_Real value = matrix.Determinant();
     DisplayCurve(aDoc,Handle(Geom_Curve)::DownCast(aScaledEntity), Quantity_NOC_GREEN,false);
     DisplayCurve(aDoc,Handle(Geom_Curve)::DownCast(aTranslatedEntity),Quantity_NOC_WHITE,false);
 
     DisplayCurve(aDoc,Handle(Geom_Curve)::DownCast(aScaledEntity), Quantity_NOC_GREEN,false);
     DisplayCurve(aDoc,Handle(Geom_Curve)::DownCast(aTranslatedEntity),Quantity_NOC_WHITE,false);
 

-       TCollection_AsciiString Message0 (PI);  
+       TCollection_AsciiString Message0 (M_PI);        

     Message += " PI = ";
        Message+= Message0; 
        Message += "\n";
     Message += " PI = ";
        Message+= Message0; 
        Message += "\n";

diff --git a/samples/mfc/standard/01_Geometry/src/ISession2D/ISession_Direction.cpp b/samples/mfc/standard/01_Geometry/src/ISession2D/ISession_Direction.cpp
index bac802f..9091678 100755 (executable)
--- a/samples/mfc/standard/01_Geometry/src/ISession2D/ISession_Direction.cpp
+++ b/samples/mfc/standard/01_Geometry/src/ISession2D/ISession_Direction.cpp
@@ -96,13 +96,13 @@ void ISession_Direction::Compute(const Handle(PrsMgr_PresentationManager2d)& aPr
                  myPnt.X()+myLength*myDir.X(),
                  myPnt.Y()+myLength*myDir.Y());
 
                  myPnt.X()+myLength*myDir.X(),
                  myPnt.Y()+myLength*myDir.Y());
 

-    gp_Dir2d aFirstDir = gp_Dir2d(myDir.X(),myDir.Y()).Rotated (200*PI180) ;
+    gp_Dir2d aFirstDir = gp_Dir2d(myDir.X(),myDir.Y()).Rotated (200*M_PI/180) ;

     segment->Add(myPnt.X()+myLength*myDir.X(),
                  myPnt.Y()+myLength*myDir.Y(),
                  myPnt.X()+myLength*myDir.X()+ myLength*aFirstDir.X()/5 ,
                  myPnt.Y()+myLength*myDir.Y()+ myLength*aFirstDir.Y()/5 );
 
     segment->Add(myPnt.X()+myLength*myDir.X(),
                  myPnt.Y()+myLength*myDir.Y(),
                  myPnt.X()+myLength*myDir.X()+ myLength*aFirstDir.X()/5 ,
                  myPnt.Y()+myLength*myDir.Y()+ myLength*aFirstDir.Y()/5 );
 

-    gp_Dir2d aSecondDir = gp_Dir2d(myDir.X(),myDir.Y()).Rotated (-200*PI180) ;
+    gp_Dir2d aSecondDir = gp_Dir2d(myDir.X(),myDir.Y()).Rotated (-200*M_PI/180) ;

     segment->Add(myPnt.X()+myLength*myDir.X(),
                  myPnt.Y()+myLength*myDir.Y(),
                  myPnt.X()+myLength*myDir.X()+ myLength*aSecondDir.X()/5 ,
     segment->Add(myPnt.X()+myLength*myDir.X(),
                  myPnt.Y()+myLength*myDir.Y(),
                  myPnt.X()+myLength*myDir.X()+ myLength*aSecondDir.X()/5 ,

diff --git a/samples/mfc/standard/02_Modeling/src/ModelingDoc.cpp b/samples/mfc/standard/02_Modeling/src/ModelingDoc.cpp
index 47ff40d..c4f4a18 100755 (executable)
--- a/samples/mfc/standard/02_Modeling/src/ModelingDoc.cpp
+++ b/samples/mfc/standard/02_Modeling/src/ModelingDoc.cpp
@@ -192,7 +192,7 @@ void CModelingDoc::OnRotate()
        Handle(Geom_Axis1Placement) Gax1 = new Geom_Axis1Placement(axe);
        Handle (AIS_Axis) ax1 = new AIS_Axis(Gax1);
        myAISContext->Display(ax1,Standard_False);
        Handle(Geom_Axis1Placement) Gax1 = new Geom_Axis1Placement(axe);
        Handle (AIS_Axis) ax1 = new AIS_Axis(Gax1);
        myAISContext->Display(ax1,Standard_False);

-       theTransformation.SetRotation(axe,30*PI/180);
+       theTransformation.SetRotation(axe,30*M_PI/180);

        BRepBuilderAPI_Transform myBRepTransformation(S,theTransformation);
        TopoDS_Shape S2 = myBRepTransformation.Shape();
        Handle(AIS_Shape) ais2 = new AIS_Shape(S2);
        BRepBuilderAPI_Transform myBRepTransformation(S,theTransformation);
        TopoDS_Shape S2 = myBRepTransformation.Shape();
        Handle(AIS_Shape) ais2 = new AIS_Shape(S2);


@@ -434,7 +434,7 @@ void CModelingDoc::OnCylinder()
        myAISContext->Display(aCyl1,Standard_False);
        TopoDS_Shape C2 = BRepPrimAPI_MakeCylinder (gp_Ax2(gp_Pnt(200.,200.,0.),
                                                                                                   gp_Dir(0.,0.,1.)),
        myAISContext->Display(aCyl1,Standard_False);
        TopoDS_Shape C2 = BRepPrimAPI_MakeCylinder (gp_Ax2(gp_Pnt(200.,200.,0.),
                                                                                                   gp_Dir(0.,0.,1.)),

-                                                                                       40.,110.,210.*PI180);
+                                                                                       40.,110.,210.*M_PI/180);

        Handle(AIS_Shape) aCyl2 = new AIS_Shape(C2);
        myAISContext->SetMaterial(aCyl2,Graphic3d_NOM_PLASTIC,Standard_False);    
        myAISContext->SetColor(aCyl2,Quantity_NOC_MATRABLUE,Standard_False);    
        Handle(AIS_Shape) aCyl2 = new AIS_Shape(C2);
        myAISContext->SetMaterial(aCyl2,Graphic3d_NOM_PLASTIC,Standard_False);    
        myAISContext->SetColor(aCyl2,Quantity_NOC_MATRABLUE,Standard_False);    


@@ -467,7 +467,7 @@ void CModelingDoc::OnCone()
        myAISContext->Display(ais1,Standard_False);
        TopoDS_Shape C2 = BRepPrimAPI_MakeCone(gp_Ax2(gp_Pnt(100.,100.,0.),
                                                                                                   gp_Dir(0.,0.,1.)),
        myAISContext->Display(ais1,Standard_False);
        TopoDS_Shape C2 = BRepPrimAPI_MakeCone(gp_Ax2(gp_Pnt(100.,100.,0.),
                                                                                                   gp_Dir(0.,0.,1.)),

-                                                                                       60.,0.,150.,210.*PI180);
+                                                                                       60.,0.,150.,210.*M_PI/180);

        Handle(AIS_Shape) ais2 = new AIS_Shape(C2);
        myAISContext->SetMaterial(ais2,Graphic3d_NOM_PLASTIC,Standard_False);    
        myAISContext->SetColor(ais2,Quantity_NOC_GREEN,Standard_False); 
        Handle(AIS_Shape) ais2 = new AIS_Shape(C2);
        myAISContext->SetMaterial(ais2,Graphic3d_NOM_PLASTIC,Standard_False);    
        myAISContext->SetColor(ais2,Quantity_NOC_GREEN,Standard_False); 


@@ -498,19 +498,19 @@ void CModelingDoc::OnSphere()
        myAISContext->SetColor(ais1,Quantity_NOC_AZURE,Standard_False); 
        myAISContext->SetMaterial(ais1,Graphic3d_NOM_PLASTIC,Standard_False);    
        myAISContext->Display(ais1,Standard_False);
        myAISContext->SetColor(ais1,Quantity_NOC_AZURE,Standard_False); 
        myAISContext->SetMaterial(ais1,Graphic3d_NOM_PLASTIC,Standard_False);    
        myAISContext->Display(ais1,Standard_False);

-       TopoDS_Shape S2 = BRepPrimAPI_MakeSphere(100.,120.*PI180);
+       TopoDS_Shape S2 = BRepPrimAPI_MakeSphere(100.,120.*M_PI/180);

        Handle(AIS_Shape) ais2 = new AIS_Shape(S2);
        myAISContext->SetColor(ais2,Quantity_NOC_GREEN,Standard_False); 
        myAISContext->SetMaterial(ais2,Graphic3d_NOM_PLASTIC,Standard_False);    
        myAISContext->Display(ais2,Standard_False);
        TopoDS_Shape S3 = BRepPrimAPI_MakeSphere(gp_Pnt(200.,250.,0.),100.,
        Handle(AIS_Shape) ais2 = new AIS_Shape(S2);
        myAISContext->SetColor(ais2,Quantity_NOC_GREEN,Standard_False); 
        myAISContext->SetMaterial(ais2,Graphic3d_NOM_PLASTIC,Standard_False);    
        myAISContext->Display(ais2,Standard_False);
        TopoDS_Shape S3 = BRepPrimAPI_MakeSphere(gp_Pnt(200.,250.,0.),100.,

-                                                                                -60.*PI180, 60.*PI180);
+                                                                                -60.*M_PI/180, 60.*M_PI/180);

        Handle(AIS_Shape) ais3 = new AIS_Shape(S3);
        myAISContext->SetColor(ais3,Quantity_NOC_RED,Standard_False); 
        myAISContext->SetMaterial(ais3,Graphic3d_NOM_PLASTIC,Standard_False);    
        myAISContext->Display(ais3,Standard_False);
        TopoDS_Shape S4 = BRepPrimAPI_MakeSphere(gp_Pnt(0.,0.,-300.),150.,
        Handle(AIS_Shape) ais3 = new AIS_Shape(S3);
        myAISContext->SetColor(ais3,Quantity_NOC_RED,Standard_False); 
        myAISContext->SetMaterial(ais3,Graphic3d_NOM_PLASTIC,Standard_False);    
        myAISContext->Display(ais3,Standard_False);
        TopoDS_Shape S4 = BRepPrimAPI_MakeSphere(gp_Pnt(0.,0.,-300.),150.,

-                                                                                -45.*PI180, 45.*PI180, 45.*PI180);
+                                                                                -45.*M_PI/180, 45.*M_PI/180, 45.*M_PI/180);

        Handle(AIS_Shape) ais4 = new AIS_Shape(S4);
        myAISContext->SetColor(ais4,Quantity_NOC_MATRABLUE,Standard_False); 
        myAISContext->SetMaterial(ais4,Graphic3d_NOM_PLASTIC,Standard_False);    
        Handle(AIS_Shape) ais4 = new AIS_Shape(S4);
        myAISContext->SetColor(ais4,Quantity_NOC_MATRABLUE,Standard_False); 
        myAISContext->SetMaterial(ais4,Graphic3d_NOM_PLASTIC,Standard_False);    


@@ -544,13 +544,13 @@ void CModelingDoc::OnTorus()
        myAISContext->SetMaterial(ais1,Graphic3d_NOM_PLASTIC,Standard_False);    
        myAISContext->Display(ais1,Standard_False);
        TopoDS_Shape S2 = BRepPrimAPI_MakeTorus(gp_Ax2(gp_Pnt(100.,100.,0.),gp_Dir(1.,1.,1.)),
        myAISContext->SetMaterial(ais1,Graphic3d_NOM_PLASTIC,Standard_False);    
        myAISContext->Display(ais1,Standard_False);
        TopoDS_Shape S2 = BRepPrimAPI_MakeTorus(gp_Ax2(gp_Pnt(100.,100.,0.),gp_Dir(1.,1.,1.)),

-                                                                               50.,20.,210.*PI180);
+                                                                               50.,20.,210.*M_PI/180);

        Handle(AIS_Shape) ais2 = new AIS_Shape(S2);
        myAISContext->SetColor(ais2,Quantity_NOC_GREEN,Standard_False); 
        myAISContext->SetMaterial(ais2,Graphic3d_NOM_PLASTIC,Standard_False);    
        myAISContext->Display(ais2,Standard_False);
        TopoDS_Shape S3 = BRepPrimAPI_MakeTorus(gp_Ax2(gp_Pnt(-200.,-150.,-100),gp_Dir(0.,1.,0.)),
        Handle(AIS_Shape) ais2 = new AIS_Shape(S2);
        myAISContext->SetColor(ais2,Quantity_NOC_GREEN,Standard_False); 
        myAISContext->SetMaterial(ais2,Graphic3d_NOM_PLASTIC,Standard_False);    
        myAISContext->Display(ais2,Standard_False);
        TopoDS_Shape S3 = BRepPrimAPI_MakeTorus(gp_Ax2(gp_Pnt(-200.,-150.,-100),gp_Dir(0.,1.,0.)),

-                                                                               60.,20.,-45.*PI180,45.*PI180,90.*PI180);
+                                                                               60.,20.,-45.*M_PI/180,45.*M_PI/180,90.*M_PI/180);

        Handle(AIS_Shape) ais3= new AIS_Shape(S3);
        myAISContext->SetColor(ais3,Quantity_NOC_CORAL,Standard_False); 
        myAISContext->SetMaterial(ais3,Graphic3d_NOM_PLASTIC,Standard_False);    
        Handle(AIS_Shape) ais3= new AIS_Shape(S3);
        myAISContext->SetColor(ais3,Quantity_NOC_CORAL,Standard_False); 
        myAISContext->SetMaterial(ais3,Graphic3d_NOM_PLASTIC,Standard_False);    


@@ -721,7 +721,7 @@ void CModelingDoc::OnRevol()
        Handle(Geom_Axis1Placement) Gax3 = new Geom_Axis1Placement(axe);
        Handle (AIS_Axis) ax3 = new AIS_Axis(Gax3);
        myAISContext->Display(ax3,Standard_False);
        Handle(Geom_Axis1Placement) Gax3 = new Geom_Axis1Placement(axe);
        Handle (AIS_Axis) ax3 = new AIS_Axis(Gax3);
        myAISContext->Display(ax3,Standard_False);

-       TopoDS_Shape S3 = BRepPrimAPI_MakeRevol(W,axe, 210.*PI180);
+       TopoDS_Shape S3 = BRepPrimAPI_MakeRevol(W,axe, 210.*M_PI/180);

        Handle(AIS_Shape) ais5 = new AIS_Shape(W);
        myAISContext->Display(ais5,Standard_False);
        Handle(AIS_Shape) ais6 = new AIS_Shape(S3);
        Handle(AIS_Shape) ais5 = new AIS_Shape(W);
        myAISContext->Display(ais5,Standard_False);
        Handle(AIS_Shape) ais6 = new AIS_Shape(S3);


@@ -737,7 +737,7 @@ void CModelingDoc::OnRevol()
        Handle(Geom_Axis1Placement) Gax4 = new Geom_Axis1Placement(axe);
        Handle (AIS_Axis) ax4 = new AIS_Axis(Gax4);
        myAISContext->Display(ax4,Standard_False);
        Handle(Geom_Axis1Placement) Gax4 = new Geom_Axis1Placement(axe);
        Handle (AIS_Axis) ax4 = new AIS_Axis(Gax4);
        myAISContext->Display(ax4,Standard_False);

-       TopoDS_Shape S4 = BRepPrimAPI_MakeRevol(F,axe, 90.*PI180);
+       TopoDS_Shape S4 = BRepPrimAPI_MakeRevol(F,axe, 90.*M_PI/180);

        Handle(AIS_Shape) ais8 = new AIS_Shape(S4);
        myAISContext->SetColor(ais8,Quantity_NOC_MATRABLUE,Standard_False); 
        myAISContext->SetMaterial(ais8,Graphic3d_NOM_PLASTIC,Standard_False);    
        Handle(AIS_Shape) ais8 = new AIS_Shape(S4);
        myAISContext->SetColor(ais8,Quantity_NOC_MATRABLUE,Standard_False); 
        myAISContext->SetMaterial(ais8,Graphic3d_NOM_PLASTIC,Standard_False);    


@@ -1043,7 +1043,7 @@ void CModelingDoc::OnDraft()
                gp_Pln apln = surf->Pln();
                gp_Dir dirF = apln.Axis().Direction();
                if (dirF.IsNormal(gp_Dir(0.,0.,1.),Precision::Angular()))
                gp_Pln apln = surf->Pln();
                gp_Dir dirF = apln.Axis().Direction();
                if (dirF.IsNormal(gp_Dir(0.,0.,1.),Precision::Angular()))

-                       adraft.Add(F, gp_Dir(0.,0.,1.), 15.*PI180, gp_Pln(gp::XOY()));
+                       adraft.Add(F, gp_Dir(0.,0.,1.), 15.*M_PI/180, gp_Pln(gp::XOY()));

        }
        ais1->Set(adraft.Shape());
        myAISContext->Redisplay(ais1,Standard_False);
        }
        ais1->Set(adraft.Shape());
        myAISContext->Redisplay(ais1,Standard_False);


@@ -1536,7 +1536,7 @@ BRepFilletAPI_MakeFillet fillet(theCylinder);
 TColgp_Array1OfPnt2d TabPoint2(1,20);
 
 for (Standard_Integer i=0; i<=19; i++) {
 TColgp_Array1OfPnt2d TabPoint2(1,20);
 
 for (Standard_Integer i=0; i<=19; i++) {

-       gp_Pnt2d Point2d(i*2*PI/19,60*cos(i*PI/19-PI/2)+10);
+       gp_Pnt2d Point2d(i*2*M_PI/19,60*cos(i*M_PI/19-M_PI/2)+10);

        TabPoint2.SetValue(i+1,Point2d);
 }
 
        TabPoint2.SetValue(i+1,Point2d);
 }
 


@@ -1938,14 +1938,14 @@ void CModelingDoc::OnDprismLocal()
        gp_Circ2d c(gp_Ax2d(gp_Pnt2d(200.,130.),gp_Dir2d(1.,0.)),50.);
        BRepBuilderAPI_MakeWire MW;
        Handle(Geom2d_Curve) aline = new Geom2d_Circle(c);
        gp_Circ2d c(gp_Ax2d(gp_Pnt2d(200.,130.),gp_Dir2d(1.,0.)),50.);
        BRepBuilderAPI_MakeWire MW;
        Handle(Geom2d_Curve) aline = new Geom2d_Circle(c);

-       MW.Add(BRepBuilderAPI_MakeEdge(aline,surf,0.,PI));
-       MW.Add(BRepBuilderAPI_MakeEdge(aline,surf,PI,2.*PI));
+       MW.Add(BRepBuilderAPI_MakeEdge(aline,surf,0.,M_PI));
+       MW.Add(BRepBuilderAPI_MakeEdge(aline,surf,M_PI,2.*M_PI));

        BRepBuilderAPI_MakeFace MKF;
        MKF.Init(surf,Standard_False, Precision::Confusion());
        MKF.Add(MW.Wire());
        TopoDS_Face FP = MKF.Face();
        BRepLib::BuildCurves3d(FP);
        BRepBuilderAPI_MakeFace MKF;
        MKF.Init(surf,Standard_False, Precision::Confusion());
        MKF.Add(MW.Wire());
        TopoDS_Face FP = MKF.Face();
        BRepLib::BuildCurves3d(FP);

-       BRepFeat_MakeDPrism MKDP(S,FP,F,10*PI180,1,Standard_True);
+       BRepFeat_MakeDPrism MKDP(S,FP,F,10*M_PI/180,1,Standard_True);

        MKDP.Perform(200);
        TopoDS_Shape res1 = MKDP.Shape();
 
        MKDP.Perform(200);
        TopoDS_Shape res1 = MKDP.Shape();
 


@@ -2734,7 +2734,7 @@ void CModelingDoc::OnEdge()
 //////////////The red edge
 
        gp_Elips Elips(gp_Ax2(gp_Pnt(10,0,0),gp_Dir(1,1,1)),60,30);
 //////////////The red edge
 
        gp_Elips Elips(gp_Ax2(gp_Pnt(10,0,0),gp_Dir(1,1,1)),60,30);

-       RedEdge = BRepBuilderAPI_MakeEdge(Elips,0,PI/2);
+       RedEdge = BRepBuilderAPI_MakeEdge(Elips,0,M_PI/2);

 
 /////////////The green edge and the both extreme vertex
 
 
 /////////////The green edge and the both extreme vertex
 


@@ -2865,14 +2865,14 @@ void CModelingDoc::OnWire()
 ////////////The red wire is build from a single edge
 
        gp_Elips Elips(gp_Ax2(gp_Pnt(250,0,0),gp_Dir(1,1,1)),160,90);
 ////////////The red wire is build from a single edge
 
        gp_Elips Elips(gp_Ax2(gp_Pnt(250,0,0),gp_Dir(1,1,1)),160,90);

-       Edge1 = BRepBuilderAPI_MakeEdge(Elips,0,PI/2);
+       Edge1 = BRepBuilderAPI_MakeEdge(Elips,0,M_PI/2);

 
        RedWire = BRepBuilderAPI_MakeWire(Edge1);
 
 ///////////the yellow wire is build from an existing wire and an edge
        
        gp_Circ circle(gp_Ax2(gp_Pnt(-300,0,0),gp_Dir(1,0,0)),80);
 
        RedWire = BRepBuilderAPI_MakeWire(Edge1);
 
 ///////////the yellow wire is build from an existing wire and an edge
        
        gp_Circ circle(gp_Ax2(gp_Pnt(-300,0,0),gp_Dir(1,0,0)),80);

-       Edge2 = BRepBuilderAPI_MakeEdge(circle,0,PI);
+       Edge2 = BRepBuilderAPI_MakeEdge(circle,0,M_PI);

 
        ExistingWire = BRepBuilderAPI_MakeWire(Edge2);
 
 
        ExistingWire = BRepBuilderAPI_MakeWire(Edge2);
 


@@ -2888,7 +2888,7 @@ void CModelingDoc::OnWire()
 //////////we use the methods Add, Edge and Vertex from BRepBuilderAPI_MakeWire.
 
        gp_Circ circle2(gp_Ax2(gp_Pnt(0,0,0),gp_Dir(0,1,0)),200);
 //////////we use the methods Add, Edge and Vertex from BRepBuilderAPI_MakeWire.
 
        gp_Circ circle2(gp_Ax2(gp_Pnt(0,0,0),gp_Dir(0,1,0)),200);

-       Edge4 = BRepBuilderAPI_MakeEdge(circle2,0,PI);
+       Edge4 = BRepBuilderAPI_MakeEdge(circle2,0,M_PI);

 
        ExistingWire2 = BRepBuilderAPI_MakeWire(Edge4);
 
 
        ExistingWire2 = BRepBuilderAPI_MakeWire(Edge4);
 


@@ -3043,7 +3043,7 @@ void CModelingDoc::OnFace()
 ////////////////////
 
        gp_Circ circle(gp_Ax2(gp_Pnt(0,0,0),gp_Dir(1,0,0)),80);
 ////////////////////
 
        gp_Circ circle(gp_Ax2(gp_Pnt(0,0,0),gp_Dir(1,0,0)),80);

-       Edge1 = BRepBuilderAPI_MakeEdge(circle,0,PI);
+       Edge1 = BRepBuilderAPI_MakeEdge(circle,0,M_PI);

 
        Edge2 = BRepBuilderAPI_MakeEdge(gp_Pnt(0,0,-80),gp_Pnt(0,-10,40));
        Edge3 = BRepBuilderAPI_MakeEdge(gp_Pnt(0,-10,40),gp_Pnt(0,0,80));
 
        Edge2 = BRepBuilderAPI_MakeEdge(gp_Pnt(0,0,-80),gp_Pnt(0,-10,40));
        Edge3 = BRepBuilderAPI_MakeEdge(gp_Pnt(0,-10,40),gp_Pnt(0,0,80));


@@ -3658,7 +3658,7 @@ void CModelingDoc::OnBuilder()
        B.Add(EX01,V101);
        //Parameters
        B.UpdateVertex(V001,0,EX01,precision);
        B.Add(EX01,V101);
        //Parameters
        B.UpdateVertex(V001,0,EX01,precision);

-       B.UpdateVertex(V101,PI,EX01,precision);
+       B.UpdateVertex(V101,M_PI,EX01,precision);

 
        //Edge EX11
        C = new Geom_Circle(gp_Ax2(gp_Pnt(100,150,100),gp_Dir(0,1,0),gp_Dir(-1,0,0)),100);
 
        //Edge EX11
        C = new Geom_Circle(gp_Ax2(gp_Pnt(100,150,100),gp_Dir(0,1,0),gp_Dir(-1,0,0)),100);


@@ -3669,7 +3669,7 @@ void CModelingDoc::OnBuilder()
        B.Add(EX11,V111);
        //Parameters
        B.UpdateVertex(V011,0,EX11,precision);
        B.Add(EX11,V111);
        //Parameters
        B.UpdateVertex(V011,0,EX11,precision);

-       B.UpdateVertex(V111,PI,EX11,precision);
+       B.UpdateVertex(V111,M_PI,EX11,precision);

 
        //Build wire and faces
        //Faces normals are along the axis X,Y,Z
 
        //Build wire and faces
        //Faces normals are along the axis X,Y,Z


@@ -3766,7 +3766,7 @@ void CModelingDoc::OnBuilder()
        C2d = new Geom2d_Circle(gp_Ax2d(gp_Pnt2d(100,100),gp_Dir2d(0,-1)),100);
        B.UpdateEdge(EX01,C2d,FYMAX,precision);
        B.UpdateVertex(V001,0,EX01,FYMAX,precision);
        C2d = new Geom2d_Circle(gp_Ax2d(gp_Pnt2d(100,100),gp_Dir2d(0,-1)),100);
        B.UpdateEdge(EX01,C2d,FYMAX,precision);
        B.UpdateVertex(V001,0,EX01,FYMAX,precision);

-       B.UpdateVertex(V101,PI,EX01,FYMAX,precision);
+       B.UpdateVertex(V101,M_PI,EX01,FYMAX,precision);

 
        EZ10.Orientation(TopAbs_REVERSED);
        B.Add(W,EZ10);
 
        EZ10.Orientation(TopAbs_REVERSED);
        B.Add(W,EZ10);


@@ -3803,7 +3803,7 @@ void CModelingDoc::OnBuilder()
        C2d = new Geom2d_Circle(gp_Ax2d(gp_Pnt2d(100,100),gp_Dir2d(0,-1)),100);
        B.UpdateEdge(EX11,C2d,FYMIN,precision);
        B.UpdateVertex(V011,0,EX11,FYMIN,precision);
        C2d = new Geom2d_Circle(gp_Ax2d(gp_Pnt2d(100,100),gp_Dir2d(0,-1)),100);
        B.UpdateEdge(EX11,C2d,FYMIN,precision);
        B.UpdateVertex(V011,0,EX11,FYMIN,precision);

-       B.UpdateVertex(V111,PI,EX11,FYMIN,precision);
+       B.UpdateVertex(V111,M_PI,EX11,FYMIN,precision);

 
        EZ11.Orientation(TopAbs_REVERSED);
        B.Add(W,EZ11);
 
        EZ11.Orientation(TopAbs_REVERSED);
        B.Add(W,EZ11);


@@ -3865,12 +3865,12 @@ void CModelingDoc::OnBuilder()
        L2d = new Geom2d_Line(gp_Ax2d(gp_Pnt2d(0,0),gp_Dir2d(1,0)));
        B.UpdateEdge(EX01,L2d,FZMIN,precision);
        B.UpdateVertex(V001,0,EX01,FZMIN,precision);
        L2d = new Geom2d_Line(gp_Ax2d(gp_Pnt2d(0,0),gp_Dir2d(1,0)));
        B.UpdateEdge(EX01,L2d,FZMIN,precision);
        B.UpdateVertex(V001,0,EX01,FZMIN,precision);

-       B.UpdateVertex(V101,PI,EX01,FZMIN,precision);
+       B.UpdateVertex(V101,M_PI,EX01,FZMIN,precision);

 
        EY11.Orientation(TopAbs_FORWARD);
        B.Add(W,EY11);
        //pcurve
 
        EY11.Orientation(TopAbs_FORWARD);
        B.Add(W,EY11);
        //pcurve

-       L2d = new Geom2d_Line(gp_Pnt2d(PI,0),gp_Dir2d(0,1));
+       L2d = new Geom2d_Line(gp_Pnt2d(M_PI,0),gp_Dir2d(0,1));

        B.UpdateEdge(EY11,L2d,FZMIN,precision);
 
        EX11.Orientation(TopAbs_REVERSED);
        B.UpdateEdge(EY11,L2d,FZMIN,precision);
 
        EX11.Orientation(TopAbs_REVERSED);


@@ -3878,7 +3878,7 @@ void CModelingDoc::OnBuilder()
        //pcurve
        L2d = new Geom2d_Line(gp_Ax2d(gp_Pnt2d(0,150),gp_Dir2d(1,0)));
        B.UpdateEdge(EX11,L2d,FZMIN,precision);
        //pcurve
        L2d = new Geom2d_Line(gp_Ax2d(gp_Pnt2d(0,150),gp_Dir2d(1,0)));
        B.UpdateEdge(EX11,L2d,FZMIN,precision);

-       B.UpdateVertex(V111,PI,EX11,FZMIN,precision);
+       B.UpdateVertex(V111,M_PI,EX11,FZMIN,precision);

        B.UpdateVertex(V011,0,EX11,FZMIN,precision);
 
        EY01.Orientation(TopAbs_REVERSED);
        B.UpdateVertex(V011,0,EX11,FZMIN,precision);
 
        EY01.Orientation(TopAbs_REVERSED);


@@ -5070,4 +5070,4 @@ void CModelingDoc::Popup(const Standard_Integer  x,
   ClientToScreen ( (HWND)(aWNTWindow->HWindow()),&winCoord);
   pPopup->TrackPopupMenu(TPM_LEFTALIGN | TPM_RIGHTBUTTON , winCoord.x, winCoord.y , 
                          AfxGetMainWnd());
   ClientToScreen ( (HWND)(aWNTWindow->HWindow()),&winCoord);
   pPopup->TrackPopupMenu(TPM_LEFTALIGN | TPM_RIGHTBUTTON , winCoord.x, winCoord.y , 
                          AfxGetMainWnd());

-}
\ No newline at end of file
+}

diff --git a/samples/mfc/standard/03_Viewer2d/src/Viewer2dDoc.cpp b/samples/mfc/standard/03_Viewer2d/src/Viewer2dDoc.cpp
index dab7aa4..d01019c 100755 (executable)
--- a/samples/mfc/standard/03_Viewer2d/src/Viewer2dDoc.cpp
+++ b/samples/mfc/standard/03_Viewer2d/src/Viewer2dDoc.cpp
@@ -115,7 +115,7 @@ void CViewer2dDoc::OnBUTTONTestText()
         new Sample2D_Text(Text,
                        0,15*(j-15),      //  anX  , anY 
                        Aspect_TOT_SOLID,//  aType  
         new Sample2D_Text(Text,
                        0,15*(j-15),      //  anX  , anY 
                        Aspect_TOT_SOLID,//  aType  

-                       20.0*PI180 ,            //  anAngle  
+                       20.0*M_PI/180 ,            //  anAngle  

                        0.0 ,            //  aSlant  
                        color++,               //  aColorIndex  
                        0,               //  aFontIndex  
                        0.0 ,            //  aSlant  
                        color++,               //  aColorIndex  
                        0,               //  aFontIndex  


@@ -247,7 +247,7 @@ void CViewer2dDoc::OnBUTTONTestMarkers()
           new Sample2D_Markers(EntryNumber, // generic marker index
                                10*i,10,// display point
                                5,5, // size
           new Sample2D_Markers(EntryNumber, // generic marker index
                                10*i,10,// display point
                                5,5, // size

-                               20*PI180); // angle in radian
+                               20*M_PI/180); // angle in radian

         myAISInteractiveContext2D->Display(Marker,            // object
                                            Standard_False);  // Redraw
       }
         myAISInteractiveContext2D->Display(Marker,            // object
                                            Standard_False);  // Redraw
       }


@@ -269,7 +269,7 @@ void CViewer2dDoc::OnBUTTONTestMarkers()
         new Sample2D_Markers(20,20, // reference point
                              0,0,  // display point
                              3,2,    // major, minor radius
         new Sample2D_Markers(20,20, // reference point
                              0,0,  // display point
                              3,2,    // major, minor radius

-                             20*PI180); // angle
+                             20*M_PI/180); // angle

       myAISInteractiveContext2D->Display(Marker,            // object
                                          Standard_False);  // Redraw
     }
       myAISInteractiveContext2D->Display(Marker,            // object
                                          Standard_False);  // Redraw
     }


@@ -650,7 +650,7 @@ void CViewer2dDoc::OnBUTTONTestRect()
    Handle (Sample2D_Rectangle) aRectangle = new Sample2D_Rectangle(
                                                 0,0,       // display point
                                              50,80,     // size
    Handle (Sample2D_Rectangle) aRectangle = new Sample2D_Rectangle(
                                                 0,0,       // display point
                                              50,80,     // size

-                                             20*PI180); // angle in radian
+                                             20*M_PI/180); // angle in radian

 
    aRectangle->SetHighlightMode(AIS2D_TOD_OBJECT);
    myAISInteractiveContext2D->Display(aRectangle, Standard_False);  // Display rectangle
 
    aRectangle->SetHighlightMode(AIS2D_TOD_OBJECT);
    myAISInteractiveContext2D->Display(aRectangle, Standard_False);  // Display rectangle


@@ -660,7 +660,7 @@ void CViewer2dDoc::OnBUTTONTestRect()
    Handle (Sample2D_Rectangle) aRectangle2 = new Sample2D_Rectangle(
                                               80,0,       // display point
                                            50,90,     // size
    Handle (Sample2D_Rectangle) aRectangle2 = new Sample2D_Rectangle(
                                               80,0,       // display point
                                            50,90,     // size

-                                           20*PI180); // angle in radian
+                                           20*M_PI/180); // angle in radian

 
    aRectangle2->SetHighlightMode(AIS2D_TOD_ELEMENT);
    myAISInteractiveContext2D->Display(aRectangle2);  // Display rectangle
 
    aRectangle2->SetHighlightMode(AIS2D_TOD_ELEMENT);
    myAISInteractiveContext2D->Display(aRectangle2);  // Display rectangle

diff --git a/samples/mfc/standard/09_Animation/src/AnimationDoc.cpp b/samples/mfc/standard/09_Animation/src/AnimationDoc.cpp
index 02693a6..e52ec3d 100755 (executable)
--- a/samples/mfc/standard/09_Animation/src/AnimationDoc.cpp
+++ b/samples/mfc/standard/09_Animation/src/AnimationDoc.cpp
@@ -284,7 +284,7 @@ void CAnimationDoc::OnMyTimer()
 
        myAngle++;
 
 
        myAngle++;
 

-       angleA = thread*myAngle*PI/180;
+       angleA = thread*myAngle*M_PI/180;

        X = Sin(angleA)*3/8;
        angleB = atan(X / Sqrt(-X * X + 1));
        Standard_Real decal(25*0.6);
        X = Sin(angleA)*3/8;
        angleB = atan(X / Sqrt(-X * X + 1));
        Standard_Real decal(25*0.6);

diff --git a/samples/mfc/standard/09_Animation/src/AnimationView3D.cpp b/samples/mfc/standard/09_Animation/src/AnimationView3D.cpp
index 8643441..94a25a9 100755 (executable)
--- a/samples/mfc/standard/09_Animation/src/AnimationView3D.cpp
+++ b/samples/mfc/standard/09_Animation/src/AnimationView3D.cpp
@@ -104,7 +104,7 @@ CAnimationView3D::CAnimationView3D()
 
     // will be set in OnInitial update, but, for more security :
        m_FlySens = 500. ;
 
     // will be set in OnInitial update, but, for more security :
        m_FlySens = 500. ;

-       m_TurnSens = Standard_PI / 40. ;
+       m_TurnSens = M_PI / 40. ;

 }
 
 CAnimationView3D::~CAnimationView3D()
 }
 
 CAnimationView3D::~CAnimationView3D()


@@ -951,7 +951,7 @@ void CAnimationView3D::SetFocal(double dFocus,double dAngle)
         myView->SetImmediateUpdate ( Standard_False ) ;
                myView->SetAt  ( m_Atx  , m_Aty  , m_Atz  ) ;
                m_dAngle = dAngle ;
         myView->SetImmediateUpdate ( Standard_False ) ;
                myView->SetAt  ( m_Atx  , m_Aty  , m_Atz  ) ;
                m_dAngle = dAngle ;

-               dAngle = dAngle * Standard_PI / 180. ;
+               dAngle = dAngle * M_PI / 180. ;

         myPView->SetAngle ( dAngle ) ;
                dAngle = myPView->Angle () ;
 
         myPView->SetAngle ( dAngle ) ;
                dAngle = myPView->Angle () ;
 


@@ -969,7 +969,7 @@ void CAnimationView3D::ReloadData()
        myView->Eye ( m_Eyex , m_Eyey , m_Eyez ) ;
 
        dTwist = myView->Twist () ;
        myView->Eye ( m_Eyex , m_Eyey , m_Eyez ) ;
 
        dTwist = myView->Twist () ;

-       dTwist = dTwist * 180. / Standard_PI ;
+       dTwist = dTwist * 180. / M_PI ;

 
        sprintf_s ( szMsg , "%lf" , m_Atx ) ;
        (m_Tune.GetDlgItem ( IDC_XAT ))->SetWindowText ( szMsg ) ;
 
        sprintf_s ( szMsg , "%lf" , m_Atx ) ;
        (m_Tune.GetDlgItem ( IDC_XAT ))->SetWindowText ( szMsg ) ;


@@ -995,7 +995,7 @@ void CAnimationView3D::ReloadData()
 
     m_Focus = sqrt ( dx * dx + dy * dy + dz * dz ) ;
        m_dAngle = myPView->Angle () ;
 
     m_Focus = sqrt ( dx * dx + dy * dy + dz * dz ) ;
        m_dAngle = myPView->Angle () ;

-       m_dAngle = m_dAngle * 180. / Standard_PI ;
+       m_dAngle = m_dAngle * 180. / M_PI ;

 
        m_Tune.m_dAngle = m_dAngle ;
        m_Tune.m_dFocus = m_Focus  ;
 
        m_Tune.m_dAngle = m_dAngle ;
        m_Tune.m_dFocus = m_Focus  ;


@@ -1053,4 +1053,4 @@ void CAnimationView3D::OnUpdateViewDisplaystatus(CCmdUI* pCmdUI)
        else {
                pCmdUI->SetCheck ( 0 ) ;
        }
        else {
                pCmdUI->SetCheck ( 0 ) ;
        }

-}
\ No newline at end of file
+}

diff --git a/samples/mfc/standard/10_Convert/src/Convert_Presentation.cpp b/samples/mfc/standard/10_Convert/src/Convert_Presentation.cpp
index 9d888a8..b5d06bf 100755 (executable)
--- a/samples/mfc/standard/10_Convert/src/Convert_Presentation.cpp
+++ b/samples/mfc/standard/10_Convert/src/Convert_Presentation.cpp
@@ -318,7 +318,7 @@ void Convert_Presentation::sampleCylindricalSurface()
   // only finit surfaces can be converted to BSpline surfaces, 
   // cylindrical surface is infinite, it must be trimmed
   Handle(Geom_RectangularTrimmedSurface) aSurface = 
   // only finit surfaces can be converted to BSpline surfaces, 
   // cylindrical surface is infinite, it must be trimmed
   Handle(Geom_RectangularTrimmedSurface) aSurface = 

-    new Geom_RectangularTrimmedSurface(aCylSurface, 0, 2*PI, -1000, 1000, Standard_True, Standard_True);
+    new Geom_RectangularTrimmedSurface(aCylSurface, 0, 2*M_PI, -1000, 1000, Standard_True, Standard_True);

   
   drawSurfaceAndItsBSpline(aSurface, aName, aText);
 }
   
   drawSurfaceAndItsBSpline(aSurface, aName, aText);
 }


@@ -426,12 +426,12 @@ void Convert_Presentation::sampleConicalSurface()
   // creating an axis parallel to Z axis 
   gp_Ax3 anAx(gp_Pnt(0,0,0), gp_Dir(0,0,1)); 
   // creating a conical surface with base radius = 10 and angle = 20 deg
   // creating an axis parallel to Z axis 
   gp_Ax3 anAx(gp_Pnt(0,0,0), gp_Dir(0,0,1)); 
   // creating a conical surface with base radius = 10 and angle = 20 deg

-  Handle(Geom_ConicalSurface) aConicalSurface = new Geom_ConicalSurface(anAx,PI/9., 10);
+  Handle(Geom_ConicalSurface) aConicalSurface = new Geom_ConicalSurface(anAx,M_PI/9., 10);

 
   // only finit surfaces can be converted to BSpline surfaces, 
   // conical surface is infinite, it must be trimmed
   Handle(Geom_RectangularTrimmedSurface) aSurface = 
 
   // only finit surfaces can be converted to BSpline surfaces, 
   // conical surface is infinite, it must be trimmed
   Handle(Geom_RectangularTrimmedSurface) aSurface = 

-    new Geom_RectangularTrimmedSurface(aConicalSurface, 0, 2*PI, -1000, 1000, Standard_True, Standard_True);
+    new Geom_RectangularTrimmedSurface(aConicalSurface, 0, 2*M_PI, -1000, 1000, Standard_True, Standard_True);

 
   drawSurfaceAndItsBSpline(aSurface, aName, aText);
 }
 
   drawSurfaceAndItsBSpline(aSurface, aName, aText);
 }

diff --git a/samples/mfc/standard/Common/Resource2D/CircularGrid.cpp b/samples/mfc/standard/Common/Resource2D/CircularGrid.cpp
index a8d67d3..10b0e3b 100755 (executable)
--- a/samples/mfc/standard/Common/Resource2D/CircularGrid.cpp
+++ b/samples/mfc/standard/Common/Resource2D/CircularGrid.cpp
@@ -68,7 +68,7 @@ void CCircularGrid::UpdateDialogData()
   YOrigin          = m_YOrigin ;
   RadiusStep       = m_RadiusStep   ;
   DivisionNumber   = m_DivisionNumber   ;
   YOrigin          = m_YOrigin ;
   RadiusStep       = m_RadiusStep   ;
   DivisionNumber   = m_DivisionNumber   ;

-  RotationAngle    = m_RotationAngle*PI180 ;
+  RotationAngle    = m_RotationAngle*M_PI/180 ;

   myViewer->SetCircularGridValues(XOrigin, YOrigin, RadiusStep, DivisionNumber, RotationAngle );
 
 }
   myViewer->SetCircularGridValues(XOrigin, YOrigin, RadiusStep, DivisionNumber, RotationAngle );
 
 }

diff --git a/samples/mfc/standard/Common/Resource2D/RectangularGrid.cpp b/samples/mfc/standard/Common/Resource2D/RectangularGrid.cpp
index 0ac75f7..bfde169 100755 (executable)
--- a/samples/mfc/standard/Common/Resource2D/RectangularGrid.cpp
+++ b/samples/mfc/standard/Common/Resource2D/RectangularGrid.cpp
@@ -58,7 +58,7 @@ void CRectangularGrid::UpdateDialogData()
   YOrigin = m_YOrigin ;
   XStep   = m_XStep   ;
   YStep   = m_YStep   ;
   YOrigin = m_YOrigin ;
   XStep   = m_XStep   ;
   YStep   = m_YStep   ;

-  RotationAngle= m_RotationAngle*PI180 ;
+  RotationAngle= m_RotationAngle*M_PI/180 ;

   myViewer->SetRectangularGridValues(XOrigin, YOrigin, XStep, YStep, RotationAngle );
 }
 
   myViewer->SetRectangularGridValues(XOrigin, YOrigin, XStep, YStep, RotationAngle );
 }
 

diff --git a/src/ShapeAnalysis/ShapeAnalysis_Wire.cxx b/src/ShapeAnalysis/ShapeAnalysis_Wire.cxx
index 13a471a..5906e10 100755 (executable)
--- a/src/ShapeAnalysis/ShapeAnalysis_Wire.cxx
+++ b/src/ShapeAnalysis/ShapeAnalysis_Wire.cxx
@@ -551,6 +551,11 @@ Standard_Boolean ShapeAnalysis_Wire::CheckOrder(ShapeAnalysis_WireOrder& sawo,
     if ( mode3d ) {
       TopoDS_Vertex V1 = EA.FirstVertex (E); 
       TopoDS_Vertex V2 = EA.LastVertex  (E); 
     if ( mode3d ) {
       TopoDS_Vertex V1 = EA.FirstVertex (E); 
       TopoDS_Vertex V2 = EA.LastVertex  (E); 

+      if (V1.IsNull() || V2.IsNull())
+      {
+        myStatus = ShapeExtend::EncodeStatus (ShapeExtend_FAIL2);
+        return Standard_False;
+      }

       gp_Pnt p1 = BRep_Tool::Pnt (V1);
       gp_Pnt p2 = BRep_Tool::Pnt (V2);
       sawo.Add (p1.XYZ(),p2.XYZ());
       gp_Pnt p1 = BRep_Tool::Pnt (V1);
       gp_Pnt p2 = BRep_Tool::Pnt (V2);
       sawo.Add (p1.XYZ(),p2.XYZ());


@@ -600,6 +605,11 @@ Standard_Boolean ShapeAnalysis_Wire::CheckConnected (const Standard_Integer num,
   ShapeAnalysis_Edge sae;
   TopoDS_Vertex V1 = sae.LastVertex (E1);
   TopoDS_Vertex V2 = sae.FirstVertex (E2);
   ShapeAnalysis_Edge sae;
   TopoDS_Vertex V1 = sae.LastVertex (E1);
   TopoDS_Vertex V2 = sae.FirstVertex (E2);

+  if (V1.IsNull() || V2.IsNull())
+  {
+    myStatus = ShapeExtend::EncodeStatus (ShapeExtend_FAIL2);
+    return Standard_False;
+  }

   if (V1.IsSame(V2)) return Standard_False;
 
   gp_Pnt p1 = BRep_Tool::Pnt (V1);
   if (V1.IsSame(V2)) return Standard_False;
 
   gp_Pnt p1 = BRep_Tool::Pnt (V1);

diff --git a/src/StepToTopoDS/StepToTopoDS_Builder.cxx b/src/StepToTopoDS/StepToTopoDS_Builder.cxx
index e9dfbd1..2aff9ff 100755 (executable)
--- a/src/StepToTopoDS/StepToTopoDS_Builder.cxx
+++ b/src/StepToTopoDS/StepToTopoDS_Builder.cxx
@@ -52,6 +52,7 @@
 #include <TopoDS_Edge.hxx>
 #include <TopoDS_Solid.hxx>
 #include <TopoDS_Compound.hxx>
 #include <TopoDS_Edge.hxx>
 #include <TopoDS_Solid.hxx>
 #include <TopoDS_Compound.hxx>

+#include <TopExp_Explorer.hxx>

 
 #include <ShapeFix_ShapeTolerance.hxx>
 #include <StepShape_ConnectedEdgeSet.hxx>
 
 #include <ShapeFix_ShapeTolerance.hxx>
 #include <StepShape_ConnectedEdgeSet.hxx>


@@ -736,7 +737,21 @@ void StepToTopoDS_Builder::Init
        TrCC.SetPrecision(preci);
        TrCC.SetMaxTol(maxtol);
        TrCC.Init( CC, TP );
        TrCC.SetPrecision(preci);
        TrCC.SetMaxTol(maxtol);
        TrCC.Init( CC, TP );

-       if ( TrCC.IsDone() ) res = TrCC.Value();
+       if ( TrCC.IsDone() ) 
+       {
+         if (TrCC.IsInfiniteSegment())
+         {
+           BRep_Builder aB;
+           TopoDS_Compound aComp;
+           aB.MakeCompound(aComp);
+           TopExp_Explorer anExp;
+           for (anExp.Init (TrCC.Value(), TopAbs_EDGE); anExp.More(); anExp.Next())
+             aB.Add (aComp, anExp.Current());
+           res = aComp;
+         }
+         else
+           res = TrCC.Value();
+       }

       }
       else { // try other curves
        Handle(Geom_Curve) aGeomCrv;
       }
       else { // try other curves
        Handle(Geom_Curve) aGeomCrv;

diff --git a/src/StepToTopoDS/StepToTopoDS_TranslateCompositeCurve.cdl b/src/StepToTopoDS/StepToTopoDS_TranslateCompositeCurve.cdl
index 5b825f7..93f3e9f 100755 (executable)
--- a/src/StepToTopoDS/StepToTopoDS_TranslateCompositeCurve.cdl
+++ b/src/StepToTopoDS/StepToTopoDS_TranslateCompositeCurve.cdl
@@ -57,8 +57,13 @@ is
         ---Purpose: Returns result of last translation or null wire if failed.
        ---C++: return const &
 
         ---Purpose: Returns result of last translation or null wire if failed.
        ---C++: return const &
 

+    IsInfiniteSegment (me) returns Boolean;
+        ---Purpose: Returns True if composite_curve contains a segment with infinite parameters.
+        ---C++: inline 
+

 fields
 
     myWire: Wire from TopoDS;
 fields
 
     myWire: Wire from TopoDS;

+    myInfiniteSegment: Boolean;

 
 end TranslateCompositeCurve;
 
 end TranslateCompositeCurve;

diff --git a/src/StepToTopoDS/StepToTopoDS_TranslateCompositeCurve.cxx b/src/StepToTopoDS/StepToTopoDS_TranslateCompositeCurve.cxx
index f510f2f..c51077f 100755 (executable)
--- a/src/StepToTopoDS/StepToTopoDS_TranslateCompositeCurve.cxx
+++ b/src/StepToTopoDS/StepToTopoDS_TranslateCompositeCurve.cxx
@@ -87,6 +87,7 @@ Standard_Boolean StepToTopoDS_TranslateCompositeCurve::Init (const Handle(StepGe
                                                             const Handle(Geom_Surface) &Surf)
 {
   myWire.Nullify();
                                                             const Handle(Geom_Surface) &Surf)
 {
   myWire.Nullify();

+  myInfiniteSegment = Standard_False;

   if ( CC.IsNull() ) return Standard_False;
 
   Standard_Boolean SurfMode = ( ! S.IsNull() && ! Surf.IsNull() );
   if ( CC.IsNull() ) return Standard_False;
 
   Standard_Boolean SurfMode = ( ! S.IsNull() && ! Surf.IsNull() );


@@ -167,7 +168,15 @@ Standard_Boolean StepToTopoDS_TranslateCompositeCurve::Init (const Handle(StepGe
         Handle(Geom_Curve) c3d;
         if (StepToGeom_MakeCurve::Convert(crv,c3d)) {
           BRepBuilderAPI_MakeEdge MkEdge ( c3d, c3d->FirstParameter(), c3d->LastParameter() );
         Handle(Geom_Curve) c3d;
         if (StepToGeom_MakeCurve::Convert(crv,c3d)) {
           BRepBuilderAPI_MakeEdge MkEdge ( c3d, c3d->FirstParameter(), c3d->LastParameter() );

-          if ( MkEdge.IsDone() ) edge = MkEdge.Edge();
+          if (MkEdge.IsDone())
+          {
+            if (Precision::IsNegativeInfinite (c3d->FirstParameter()) || Precision::IsPositiveInfinite (c3d->LastParameter()))
+            {
+              myInfiniteSegment = Standard_True;
+              TP->AddWarning (CC, "Segment with infinite parameters");
+            }
+            edge = MkEdge.Edge();
+          }

         }
       }
       catch(Standard_Failure) {
         }
       }
       catch(Standard_Failure) {


@@ -187,7 +196,15 @@ Standard_Boolean StepToTopoDS_TranslateCompositeCurve::Init (const Handle(StepGe
        if ( ! c2d.IsNull() ) {
          if ( edge.IsNull() ) {
            BRepBuilderAPI_MakeEdge MkEdge ( c2d, Surf, c2d->FirstParameter(), c2d->LastParameter() );
        if ( ! c2d.IsNull() ) {
          if ( edge.IsNull() ) {
            BRepBuilderAPI_MakeEdge MkEdge ( c2d, Surf, c2d->FirstParameter(), c2d->LastParameter() );

-           if ( MkEdge.IsDone() ) edge = MkEdge.Edge();
+           if (MkEdge.IsDone())
+           {
+             if (Precision::IsNegativeInfinite (c2d->FirstParameter()) || Precision::IsPositiveInfinite (c2d->LastParameter()))
+             {
+               myInfiniteSegment = Standard_True;
+               TP->AddWarning (CC, "Segment with infinite parameters");
+             }
+             edge = MkEdge.Edge();
+           }

          }
          else {
            BRep_Builder B;
          }
          else {
            BRep_Builder B;

diff --git a/src/StepToTopoDS/StepToTopoDS_TranslateCompositeCurve.lxx b/src/StepToTopoDS/StepToTopoDS_TranslateCompositeCurve.lxx
new file mode 100644 (file)
index 0000000..9e7bc48
--- /dev/null
+++ b/src/StepToTopoDS/StepToTopoDS_TranslateCompositeCurve.lxx
@@ -0,0 +1,16 @@
+// File:        StepToTopoDS_TranslateCompositeCurve.lxx
+// Created:     Jan 16 12:08:12 2012
+// Author:      ANNA MASALSKAYA
+// Copyright:   Open CASCADE SAS 2012
+
+#include <StepToTopoDS_TranslateCompositeCurve.hxx>
+
+//=======================================================================
+//function : IsInfiniteSegment
+//purpose  :
+//=======================================================================
+
+inline Standard_Boolean StepToTopoDS_TranslateCompositeCurve::IsInfiniteSegment() const
+{
+  return myInfiniteSegment;
+}