// and conditions governing the rights and limitations under the License.
-
#include <QABugs.hxx>
#include <Draw_Interpretor.hxx>
#include <TopoDS_Shape.hxx>
#include <gp_Pnt2d.hxx>
+#include <gp_Ax1.hxx>
#include <GCE2d_MakeSegment.hxx>
#include <Geom2d_TrimmedCurve.hxx>
#include <DrawTrSurf.hxx>
+#include <Precision.hxx>
+
#include <PCollection_HAsciiString.hxx>
-//static Standard_Integer OCC230 (Draw_Interpretor& /*di*/, Standard_Integer /*argc*/, const char ** /*argv*/)
+#include <cstdio>
+#include <cmath>
+#include <iostream>
+#include <OSD_PerfMeter.hxx>
+#include <OSD_Timer.hxx>
+#include <BRepPrimAPI_MakeBox.hxx>
+#include <BRepPrimAPI_MakeSphere.hxx>
+#include <BRepAlgo_Cut.hxx>
+
static Standard_Integer OCC230 (Draw_Interpretor& di, Standard_Integer argc, const char ** argv)
{
if ( argc != 4) {
return 0;
}
+static Standard_Integer OCC23361 (Draw_Interpretor& di, Standard_Integer /*argc*/, const char ** /*argv*/)
+{
+ gp_Pnt p(0, 0, 2);
+
+ gp_Trsf t1, t2;
+ t1.SetRotation(gp_Ax1(p, gp_Dir(0, 1, 0)), -0.49328285294022267);
+ t2.SetRotation(gp_Ax1(p, gp_Dir(0, 0, 1)), 0.87538474718473880);
+
+ gp_Trsf tComp = t2 * t1;
+
+ gp_Pnt p1(10, 3, 4);
+ gp_Pnt p2 = p1.Transformed(tComp);
+ gp_Pnt p3 = p1.Transformed(t1);
+ p3.Transform(t2);
+
+ // points must be equal
+ if ( ! p2.IsEqual(p3, Precision::Confusion()) )
+ di << "ERROR OCC23361: equivalent transformations does not produce equal points" << "\n";
+ else
+ di << "OCC23361: OK" << "\n";
+
+ return 0;
+}
+
+static Standard_Integer OCC23237 (Draw_Interpretor& di, Standard_Integer /*argc*/, const char** /*argv*/)
+{
+ OSD_PerfMeter aPM("TestMeter",0);
+ OSD_Timer aTM;
+
+ // run some operation in cycle for about 2 seconds to have good values of times to compare
+ int count = 0;
+ printf("OSD_PerfMeter test.\nRunning Boolean operation on solids in loop.\n");
+ for (; aTM.ElapsedTime() < 2.; count++)
+ {
+ aPM.Start();
+ aTM.Start();
+
+ // do some operation that will take considerable time compared with time or starting / stopping timers
+ BRepPrimAPI_MakeBox aBox (10., 10., 10.);
+ BRepPrimAPI_MakeSphere aSphere (10.);
+ BRepAlgo_Cut (aBox.Shape(), aSphere.Shape());
+
+ aTM.Stop();
+ aPM.Stop();
+ }
+
+ int aNbEnters = 0;
+ Standard_Real aPerfMeter_CPUtime = 0., aTimer_ElapsedTime = aTM.ElapsedTime();
+
+ perf_get_meter("TestMeter", &aNbEnters, &aPerfMeter_CPUtime);
+
+ Standard_Real aTimeDiff = (fabs(aTimer_ElapsedTime - aPerfMeter_CPUtime) / aTimer_ElapsedTime);
+
+ printf("\nMeasurement results (%d cycles):\n", count);
+ printf("\nOSD_PerfMeter CPU time: %lf\nOSD_Timer elapsed time: %lf\n", aPerfMeter_CPUtime, aTimer_ElapsedTime);
+ printf("Time delta is: %.3lf %%\n", aTimeDiff * 100);
+
+ if (aTimeDiff > 0.2)
+ di << "OCC23237: Error: too much difference between CPU and elapsed times";
+ else if (aNbEnters != count)
+ di << "OCC23237: Error: counter reported by PerfMeter (" << aNbEnters << ") does not correspond to actual number of cycles";
+ else
+ di << "OCC23237: OK";
+
+ return 0;
+}
+
+#ifdef HAVE_TBB
+
+#include <Standard_Atomic.hxx>
+#include <tbb/blocked_range.h>
+#include <tbb/parallel_for.h>
+
+class IncrementerDecrementer
+{
+public:
+ IncrementerDecrementer (Standard_Integer* theVal, Standard_Boolean thePositive) : myVal (theVal), myPositive (thePositive)
+ {}
+ void operator() (const tbb::blocked_range<size_t>& r) const
+ {
+ if (myPositive)
+ for (size_t i = r.begin(); i != r.end(); ++i)
+ Standard_Atomic_Increment (myVal);
+ else
+ for (size_t i = r.begin(); i != r.end(); ++i)
+ Standard_Atomic_Decrement (myVal);
+ }
+private:
+ Standard_Integer* myVal;
+ Standard_Boolean myPositive;
+};
+#endif
+
+#define QCOMPARE(val1, val2) \
+ di << "Checking " #val1 " == " #val2 << \
+ ((val1) == (val2) ? ": OK\n" : ": Error\n")
+
+#ifdef HAVE_TBB
+static Standard_Integer OCC22980 (Draw_Interpretor& di, Standard_Integer /*argc*/, const char ** /*argv*/)
+{
+ int aSum = 0;
+
+ //check returned value
+ QCOMPARE (Standard_Atomic_Decrement (&aSum), -1);
+ QCOMPARE (Standard_Atomic_Increment (&aSum), 0);
+ QCOMPARE (Standard_Atomic_Increment (&aSum), 1);
+ QCOMPARE (Standard_Atomic_Increment (&aSum), 2);
+// QCOMPARE (Standard_Atomic_DecrementTest (&aSum), 0);
+// QCOMPARE (Standard_Atomic_DecrementTest (&aSum), 1);
+
+ //check atomicity
+ aSum = 0;
+ const int N = 1 << 24; //big enough to ensure concurrency
+
+ //increment
+ tbb::parallel_for (tbb::blocked_range<size_t> (0, N), IncrementerDecrementer (&aSum, true));
+ QCOMPARE (aSum, N);
+
+ //decrement
+ tbb::parallel_for (tbb::blocked_range<size_t> (0, N), IncrementerDecrementer (&aSum, false));
+ QCOMPARE (aSum, 0);
+
+ return 0;
+}
+
+#else /* HAVE_TBB */
+
+static Standard_Integer OCC22980 (Draw_Interpretor& di, Standard_Integer /*argc*/, const char **argv)
+{
+ di << "Test skipped: command " << argv[0] << " requires TBB library\n";
+ return 0;
+}
+
+#endif /* HAVE_TBB */
+
+#include <TDocStd_Application.hxx>
+#include <XCAFApp_Application.hxx>
+#include <TDocStd_Document.hxx>
+#include <XCAFDoc_ShapeTool.hxx>
+#include <XCAFDoc_DocumentTool.hxx>
+#include <TDF_Label.hxx>
+#include <TDataStd_Name.hxx>
+
+static Standard_Integer OCC23595 (Draw_Interpretor& di, Standard_Integer /*argc*/, const char **argv)
+{
+ const Handle(TDocStd_Application)& anApp = XCAFApp_Application::GetApplication();
+ Handle(TDocStd_Document) aDoc;
+ anApp->NewDocument ("XmlXCAF", aDoc);
+ QCOMPARE (!aDoc.IsNull(), Standard_True);
+
+ Handle(XCAFDoc_ShapeTool) aShTool = XCAFDoc_DocumentTool::ShapeTool (aDoc->Main());
+
+ //check default value
+ Standard_Boolean aValue = XCAFDoc_ShapeTool::AutoNaming();
+ QCOMPARE (aValue, Standard_True);
+
+ //true
+ XCAFDoc_ShapeTool::SetAutoNaming (Standard_True);
+ TopoDS_Shape aShape = BRepPrimAPI_MakeBox (100., 200., 300.).Shape();
+ TDF_Label aLabel = aShTool->AddShape (aShape);
+ Handle(TDataStd_Name) anAttr;
+ QCOMPARE (aLabel.FindAttribute (TDataStd_Name::GetID(), anAttr), Standard_True);
+
+ //false
+ XCAFDoc_ShapeTool::SetAutoNaming (Standard_False);
+ aShape = BRepPrimAPI_MakeBox (300., 200., 100.).Shape();
+ aLabel = aShTool->AddShape (aShape);
+ QCOMPARE (!aLabel.FindAttribute (TDataStd_Name::GetID(), anAttr), Standard_True);
+
+ //restore
+ XCAFDoc_ShapeTool::SetAutoNaming (aValue);
+
+ return 0;
+}
+
void QABugs::Commands_19(Draw_Interpretor& theCommands) {
- char *group = "QABugs";
+ const char *group = "QABugs";
theCommands.Add ("OCC230", "OCC230 TrimmedCurve Pnt2d Pnt2d", __FILE__, OCC230, group);
theCommands.Add ("OCC142", "OCC142", __FILE__, OCC142, group);
+ theCommands.Add ("OCC23361", "OCC23361", __FILE__, OCC23361, group);
+ theCommands.Add ("OCC23237", "OCC23237", __FILE__, OCC23237, group);
+ theCommands.Add ("OCC22980", "OCC22980", __FILE__, OCC22980, group);
+ theCommands.Add ("OCC23595", "OCC23595", __FILE__, OCC23595, group);
return;
}
projects / occt.git / blobdiff