Each line in the file should specify a status (single word), followed by a regular expression delimited by slashes (*/*) that will be matched against lines in the test output log to check if it corresponds to this status.
-The regular expressions should follow <a href="http://www.tcl.tk/man/tcl/TclCmd/re_syntax.htm">Tcl syntax</a>, with a special exception that "\b" is considered as word limit (Perl-style), in addition to "\y" used in Tcl.
+The regular expressions should follow <a href="https://www.tcl.tk/man/tcl/TclCmd/re_syntax.htm">Tcl syntax</a>, with a special exception that "\b" is considered as word limit (Perl-style), in addition to "\y" used in Tcl.
The rest of the line can contain a comment message, which will be added to the test report when this status is detected.
@subsection testmanual_3_6 Marking BAD cases
-If the test produces an invalid result at a certain moment then the corresponding bug should be created in the OCCT issue tracker located at http://tracker.dev.opencascade.org, and the problem should be marked as TODO in the test script.
+If the test produces an invalid result at a certain moment then the corresponding bug should be created in the OCCT issue tracker located at https://tracker.dev.opencascade.org, and the problem should be marked as TODO in the test script.
The following statement should be added to such a test script:
~~~~~
| dist_angle_complex | | Distance from edge and given angle |
| dist_angle_sequence | | Distance from edge and given angle |
-@subsubsection testmanual_5_1_7 demo
+@subsubsection testmanual_5_1_7 de
+
+This group tests reading and writing of CAD data files (iges, step) to and from OCCT.
+
+Test cases check transfer status, shape and attributes against expected reference values.
+
+| Grid | Commands | Functionality |
+| :---- | :----- | :------- |
+| iges_1, iges_2, iges_3 | igesbrep, brepiges, ReadIges, WriteIges | IGES tests |
+| step_1, step_2, step_3, step_4, step_5 | stepread, stepwrite, ReadStep, WriteStep | STEP tests |
+
+@subsubsection testmanual_5_1_8 demo
This group allows demonstrating how testing cases are created, and testing DRAW commands and the test system as a whole.
| samples | | OCCT samples |
-@subsubsection testmanual_5_1_8 draft
+@subsubsection testmanual_5_1_9 draft
This group allows testing draft operations.
| Angle | depouille | Drafts with angle (inclined walls) |
-@subsubsection testmanual_5_1_9 feat
+@subsubsection testmanual_5_1_10 feat
This group allows testing creation of features on a shape.
| featrevol | | |
| featrf | | |
-@subsubsection testmanual_5_1_10 heal
+@subsubsection testmanual_5_1_11 heal
This group allows testing the functionality provided by *ShapeHealing* toolkit.
| surface_to_revolution_standard | DT_ShapeConvertRev | Convert elementary surfaces to revolutions, simple cases |
| update_tolerance_locked | updatetolerance | Update the tolerance of shape so that it satisfy the rule: toler(face)<=toler(edge)<=toler(vertex) |
-@subsubsection testmanual_5_1_11 mesh
+@subsubsection testmanual_5_1_12 mesh
This group allows testing shape tessellation (*BRepMesh*) and shading.
| advanced_incmesh_parallel | incmesh | Meshing of complex shapes, parallel mode |
| standard_incmesh_parallel | incmesh | Meshing of simple shapes, parallel mode |
-@subsubsection testmanual_5_1_12 mkface
+@subsubsection testmanual_5_1_13 mkface
This group allows testing creation of simple surfaces.
| after_revsurf_and_offset | mkface | |
| mkplane | mkplane | |
-@subsubsection testmanual_5_1_13 nproject
+@subsubsection testmanual_5_1_14 nproject
This group allows testing normal projection of edges and wires onto a face.
| :---- | :----- | :------- |
| Base | nproject | |
-@subsubsection testmanual_5_1_14 offset
+@subsubsection testmanual_5_1_15 offset
This group allows testing offset functionality for curves and surfaces.
| shape | offsetshape | |
| wire_closed_outside_0_005, wire_closed_outside_0_025, wire_closed_outside_0_075, wire_closed_inside_0_005, wire_closed_inside_0_025, wire_closed_inside_0_075, wire_unclosed_outside_0_005, wire_unclosed_outside_0_025, wire_unclosed_outside_0_075 | mkoffset | 2d offset of closed and unclosed planar wires with different offset step and directions of offset ( inside / outside ) |
-@subsubsection testmanual_5_1_15 pipe
+@subsubsection testmanual_5_1_16 pipe
This group allows testing construction of pipes (sweeping of a contour along profile).
| :---- | :----- | :------- |
| Standard | pipe | |
-@subsubsection testmanual_5_1_16 prism
+@subsubsection testmanual_5_1_17 prism
This group allows testing construction of prisms.
| :---- | :----- | :------- |
| seminf | prism | |
-@subsubsection testmanual_5_1_17 sewing
+@subsubsection testmanual_5_1_18 sewing
This group allows testing sewing of faces by connecting edges.
| tol_1 | sewing | Sewing faces with tolerance 1 |
| tol_100 | sewing | Sewing faces with tolerance 100 |
-@subsubsection testmanual_5_1_18 thrusection
+@subsubsection testmanual_5_1_19 thrusection
This group allows testing construction of shell or a solid passing through a set of sections in a given sequence (loft).
| solids | thrusection | Lofting with resulting solid |
| not_solids | thrusection | Lofting with resulting shell or face |
-@subsubsection testmanual_5_1_19 xcaf
+@subsubsection testmanual_5_1_20 xcaf
This group allows testing extended data exchange packages.
projects / occt.git / blobdiff