-- File: BRepFill_Filling.cdl -- Created: Wed Aug 26 11:47:28 1998 -- Author: Julia GERASIMOVA -- ---Copyright: Matra Datavision 1998 class Filling from BRepFill ---Purpose: N-Side Filling -- This algorithm avoids to build a face from: -- * a set of edges defining the bounds of the face and some -- constraints the surface support has to satisfy -- * a set of edges and points defining some constraints -- the support surface has to satisfy -- * an initial surface to deform for satisfying the constraints -- * a set of parameters to control the constraints. -- -- The support surface of the face is computed by deformation -- of the initial surface in order to satisfy the given constraints. -- The set of bounding edges defines the wire of the face. -- -- If no initial surface is given, the algorithm computes it -- automatically. -- If the set of edges is not connected (Free constraint) -- missing edges are automatically computed. -- -- Limitations: -- * If some constraints are not compatible -- The algorithm does not take them into account. -- So the constraints will not be satisfyed in an area containing -- the incompatibilitries. -- * The constraints defining the bound of the face have to be -- entered in order to have a continuous wire. -- -- Other Applications: -- * Deformation of a face to satisfy internal constraints -- * Deformation of a face to improve Gi continuity with -- connected faces ---Level: Advanced uses Shape from TopoDS, Edge from TopoDS, Face from TopoDS, Pnt from gp, Shape from GeomAbs, BuildPlateSurface from GeomPlate, SequenceOfEdgeFaceAndOrder from BRepFill, SequenceOfFaceAndOrder from BRepFill, SequenceOfPointConstraint from GeomPlate, MapOfShape from TopTools, SequenceOfPnt from TColgp raises NotDone, OutOfRange, ConstructionError is Create( Degree : Integer from Standard = 3; NbPtsOnCur : Integer from Standard = 15; NbIter : Integer from Standard = 2; Anisotropie : Boolean from Standard = Standard_False; Tol2d : Real from Standard = 0.00001; Tol3d : Real from Standard = 0.0001; TolAng : Real from Standard = 0.01; TolCurv : Real from Standard = 0.1; MaxDeg : Integer from Standard = 8; MaxSegments : Integer from Standard = 9 ) ---Purpose: Constructor -- returns Filling from BRepFill; SetConstrParam( me : in out; Tol2d : Real from Standard = 0.00001; Tol3d : Real from Standard = 0.0001; TolAng : Real from Standard = 0.01; TolCurv : Real from Standard = 0.1 ); ---Purpose: Sets the values of Tolerances used to control the constraint. -- Tol2d: -- Tol3d: it is the maximum distance allowed between the support surface -- and the constraints -- TolAng: it is the maximum angle allowed between the normal of the surface -- and the constraints -- TolCurv: it is the maximum difference of curvature allowed between -- the surface and the constraint SetResolParam( me : in out; Degree : Integer from Standard = 3; NbPtsOnCur : Integer from Standard = 15; NbIter : Integer from Standard = 2; Anisotropie : Boolean from Standard = Standard_False ); ---Purpose: Sets the parameters used for resolution. -- The default values of these parameters have been chosen for a good -- ratio quality/performance. -- Degree: it is the order of energy criterion to minimize for computing -- the deformation of the surface. -- The default value is 3 -- The recommanded value is i+2 where i is the maximum order of the -- constraints. -- NbPtsOnCur: it is the average number of points for discretisation -- of the edges. -- NbIter: it is the maximum number of iterations of the process. -- For each iteration the number of discretisation points is -- increased. -- Anisotropie: SetApproxParam( me : in out; MaxDeg : Integer from Standard = 8; MaxSegments : Integer from Standard = 9 ); ---Purpose: Sets the parameters used for approximation of the surface -- LoadInitSurface( me : in out; aFace : Face from TopoDS ); ---Purpose: Loads the initial Surface Add( me : in out; anEdge : Edge from TopoDS; Order : Shape from GeomAbs; IsBound : Boolean from Standard = Standard_True ) returns Integer from Standard ---Purpose: Adds a new constraint which also defines an edge of the wire -- of the face -- Order: Order of the constraint: -- GeomAbs_C0 : the surface has to pass by 3D representation -- of the edge -- GeomAbs_G1 : the surface has to pass by 3D representation -- of the edge and to respect tangency with the first -- face of the edge -- GeomAbs_G2 : the surface has to pass by 3D representation -- of the edge and to respect tangency and curvature -- with the first face of the edge. raises ConstructionError from Standard; -- if the edge has no representation on a face and Order is -- GeomAbs_G1 or GeomAbs_G2. Add( me : in out; anEdge : Edge from TopoDS; Support : Face from TopoDS; Order : Shape from GeomAbs; IsBound : Boolean from Standard = Standard_True ) returns Integer from Standard ---Purpose: Adds a new constraint which also defines an edge of the wire -- of the face -- Order: Order of the constraint: -- GeomAbs_C0 : the surface has to pass by 3D representation -- of the edge -- GeomAbs_G1 : the surface has to pass by 3D representation -- of the edge and to respect tangency with the -- given face -- GeomAbs_G2 : the surface has to pass by 3D representation -- of the edge and to respect tangency and curvature -- with the given face. raises ConstructionError from Standard; -- if the edge has no 2d representation on the given face Add( me : in out; Support : Face from TopoDS; Order : Shape from GeomAbs ) returns Integer from Standard; ---Purpose: Adds a free constraint on a face. The corresponding edge has to -- be automatically recomputed. -- It is always a bound. Add( me : in out; Point : Pnt from gp ) returns Integer from Standard; ---Purpose: Adds a punctual constraint Add( me : in out; U, V : Real from Standard; Support : Face from TopoDS; Order : Shape from GeomAbs ) returns Integer from Standard; ---Purpose: Adds a punctual constraint. AddConstraints( me : in out; SeqOfConstraints : SequenceOfEdgeFaceAndOrder from BRepFill ) ---Purpose: Adds constraints to builder is private; BuildWires( me; EdgeMap : in out MapOfShape from TopTools; WireList : out MapOfShape from TopTools ) ---Purpose: Builds wires of maximum length is private; FindExtremitiesOfHoles( me; WireMap : in out MapOfShape from TopTools; PntSeq : out SequenceOfPnt from TColgp ) ---Purpose: Finds extremities of future edges to fix the holes between wires. -- Can properly operate only with convex contour is private; Build( me : in out ); ---Purpose: Builds the resulting faces IsDone(me) returns Boolean from Standard; Face(me) returns Face from TopoDS; -- returns the resulting face G0Error(me) returns Real from Standard; -- returns the max distance between the result and the constraints G1Error(me) returns Real from Standard; -- returns the max angle between the result and the constraints G2Error(me) returns Real from Standard; -- returns the max difference of curvature between the result and the constraints G0Error( me : in out; Index : Integer from Standard ) returns Real from Standard; -- returns the max distance between the result and the constraint Index G1Error( me : in out; Index : Integer from Standard ) returns Real from Standard; -- returns the max angle between the result and the constraint Index G2Error( me : in out; Index : Integer from Standard ) returns Real from Standard; -- returns the max difference of curvature between the result and the constraint Index fields myBuilder : BuildPlateSurface from GeomPlate; myBoundary : SequenceOfEdgeFaceAndOrder from BRepFill; myConstraints : SequenceOfEdgeFaceAndOrder from BRepFill; myFreeConstraints : SequenceOfFaceAndOrder from BRepFill; myPoints : SequenceOfPointConstraint from GeomPlate; myFace : Face from TopoDS; myInitFace : Face from TopoDS; -- Tolerances myTol2d : Real from Standard; myTol3d : Real from Standard; myTolAng : Real from Standard; myTolCurv : Real from Standard; -- Parameters of approximation myMaxDeg : Integer from Standard; myMaxSegments : Integer from Standard; -- Parameters of resolution myDegree : Integer from Standard; myNbPtsOnCur : Integer from Standard; myNbIter : Integer from Standard; myAnisotropie : Boolean from Standard; myIsInitFaceGiven : Boolean from Standard; myIsDone : Boolean from Standard; end Filling;