1 // ModelingDoc.cpp : implementation of the CModelingDoc class
6 #include "ModelingDoc.h"
8 #include "ModelingApp.h"
9 #include "ResultDialog.h"
12 #include "ISession_Direction.h"
13 #include "..\res\resource.h"
15 #include <Adaptor3d_HCurveOnSurface.hxx>
16 #include <Adaptor3d_CurveOnSurface.hxx>
17 #include <AIS_ColoredShape.hxx>
18 #include <AIS_ListOfInteractive.hxx>
19 #include <AIS_ListIteratorOfListOfInteractive.hxx>
20 #include <TColStd_Array2OfReal.hxx>
21 #include <OCC_MainFrame.h>
22 #include <BRepPrimAPI_MakeCylinder.hxx>
23 #include <TopExp_Explorer.hxx>
24 #include <Geom_Plane.hxx>
25 #include <BRepTools.hxx>
27 static Handle(AIS_Shape) AIS1;
28 static TopoDS_Face THE_F1, THE_F2;
29 static TopoDS_Edge THE_E1, THE_E2;
31 /////////////////////////////////////////////////////////////////////////////
34 IMPLEMENT_DYNCREATE(CModelingDoc, CDocument)
36 BEGIN_MESSAGE_MAP(CModelingDoc, OCC_3dBaseDoc)
37 //{{AFX_MSG_MAP(CModelingDoc)
38 ON_COMMAND(ID_MIRROR, OnMirror)
39 ON_COMMAND(ID_MIRRORAXIS, OnMirroraxis)
40 ON_COMMAND(ID_ROTATE, OnRotate)
41 ON_COMMAND(ID_SCALE, OnScale)
42 ON_COMMAND(ID_TRANSLATION, OnTranslation)
43 ON_COMMAND(ID_DISPLACEMENT, OnDisplacement)
44 ON_COMMAND(ID_DEFORM, OnDeform)
45 ON_COMMAND(ID_BOX, OnBox)
46 ON_COMMAND(ID_Cylinder, OnCylinder)
47 ON_COMMAND(ID_CONE, OnCone)
48 ON_COMMAND(ID_SPHERE, OnSphere)
49 ON_COMMAND(ID_TORUS, OnTorus)
50 ON_COMMAND(ID_WEDGE, OnWedge)
51 ON_COMMAND(ID_PRISM, OnPrism)
52 ON_COMMAND(ID_REVOL, OnRevol)
53 ON_COMMAND(ID_PIPE, OnPipe)
54 ON_COMMAND(ID_THRU, OnThru)
55 ON_COMMAND(ID_EVOLVED, OnEvolved)
56 ON_COMMAND(ID_DRAFT, OnDraft)
57 ON_COMMAND(ID_CUT, OnCut)
58 ON_COMMAND(ID_FUSE, OnFuse)
59 ON_COMMAND(ID_SECTION, OnSection)
60 ON_COMMAND(ID_COMMON, OnCommon)
61 ON_COMMAND(ID_PSECTION, OnPsection)
62 ON_COMMAND(ID_BLEND, OnBlend)
63 ON_COMMAND(ID_CHAMF, OnChamf)
64 ON_COMMAND(ID_EVOLVEDBLEND, OnEvolvedblend)
65 ON_COMMAND(ID_PRISM_LOCAL, OnPrismLocal)
66 ON_COMMAND(ID_REVOL_LOCAL, OnRevolLocal)
67 ON_COMMAND(ID_GLUE_LOCAL, OnGlueLocal)
68 ON_COMMAND(ID_DPRISM_LOCAL, OnDprismLocal)
69 ON_COMMAND(ID_Pipe_LOCAL, OnPipeLocal)
70 ON_COMMAND(ID_LINEAR_LOCAL, OnLinearLocal)
71 ON_COMMAND(ID_SPLIT_LOCAL, OnSplitLocal)
72 ON_COMMAND(ID_THICK_LOCAL, OnThickLocal)
73 ON_COMMAND(ID_OFFSET_LOCAL, OnOffsetLocal)
74 ON_COMMAND(ID_VERTEX, OnVertex)
75 ON_COMMAND(ID_EDGE, OnEdge)
76 ON_COMMAND(ID_WIRE, OnWire)
77 ON_COMMAND(ID_FACE, OnFace)
78 ON_COMMAND(ID_SHELL, OnShell)
79 ON_COMMAND(ID_COMPOUND, OnCompound)
80 ON_COMMAND(ID_GEOMETRIE, OnGeometrie)
81 ON_COMMAND(ID_SEWING, OnSewing)
82 ON_COMMAND(ID_EXPLORER, OnExplorer)
83 ON_COMMAND(ID_BUILDER, OnBuilder)
84 ON_COMMAND(ID_VALID, OnValid)
85 ON_COMMAND(ID_LINEAR, OnLinear)
86 ON_COMMAND(ID_VOLUME, OnVolume)
87 ON_COMMAND(ID_SURFACE, OnSurface)
88 ON_COMMAND(ID_BUTTON_FILL, OnButtonFill)
89 ON_COMMAND(ID_STOP_STOP, OnStopStop)
90 ON_COMMAND(ID_FILLWITHTANG, OnFillwithtang)
94 /////////////////////////////////////////////////////////////////////////////
95 // CModelingDoc construction/destruction
97 CModelingDoc::CModelingDoc()
99 myAISContext->SetDisplayMode(AIS_Shaded,Standard_False);
102 CModelingDoc::~CModelingDoc()
106 void CModelingDoc::OnMirror()
108 AIS_ListOfInteractive aList;
109 myAISContext->DisplayedObjects(aList);
110 AIS_ListIteratorOfListOfInteractive aListIterator;
111 for(aListIterator.Initialize(aList);aListIterator.More();aListIterator.Next()){
112 myAISContext->Remove (aListIterator.Value(), Standard_False);
114 TopoDS_Shape S = BRepPrimAPI_MakeWedge (60.,100.,80.,20.).Shape();
115 Handle(AIS_Shape) ais1 = new AIS_Shape(S);
116 myAISContext->SetColor(ais1,Quantity_NOC_GREEN,Standard_False);
117 myAISContext->SetMaterial(ais1,Graphic3d_NOM_PLASTIC,Standard_False);
118 myAISContext->Display(ais1,Standard_False);
119 gp_Trsf theTransformation;
120 gp_Pnt PntCenterOfTheTransformation(110,60,60);
121 Handle(AIS_Point) aispnt = new AIS_Point(new Geom_CartesianPoint(PntCenterOfTheTransformation));
122 myAISContext->Display(aispnt,Standard_False);
123 theTransformation.SetMirror(PntCenterOfTheTransformation);
124 BRepBuilderAPI_Transform myBRepTransformation(S,theTransformation);
125 TopoDS_Shape S2 = myBRepTransformation.Shape();
126 Handle(AIS_Shape) ais2 = new AIS_Shape(S2);
127 myAISContext->SetColor(ais2,Quantity_NOC_BLUE1,Standard_False);
128 myAISContext->SetMaterial(ais2,Graphic3d_NOM_PLASTIC,Standard_False);
129 myAISContext->Display(ais2,Standard_False);
131 TCollection_AsciiString Message ("\
133 TopoDS_Shape S = BRepBuilderAPI_MakeWedge(60.,100.,80.,20.); \n\
134 gp_Trsf theTransformation; \n\
135 gp_Pnt PntCenterOfTheTransformation(110,60,60); \n\
136 theTransformation.SetMirror(PntCenterOfTheTransformation);\n\
137 BRepBuilderAPI_Transform myBRepTransformation(S,theTransformation);\n\
138 TopoDS_Shape TransformedShape = myBRepTransformation.Shape(); \n");
139 PocessTextInDialog("Transform a Shape with Mirror and One point.", Message);
143 void CModelingDoc::OnMirroraxis()
145 AIS_ListOfInteractive aList;
146 myAISContext->DisplayedObjects(aList);
147 AIS_ListIteratorOfListOfInteractive aListIterator;
148 for(aListIterator.Initialize(aList);aListIterator.More();aListIterator.Next()){
149 myAISContext->Remove (aListIterator.Value(), Standard_False);
151 TopoDS_Shape S = BRepPrimAPI_MakeWedge(60.,100.,80.,20.).Shape();
152 Handle(AIS_Shape) ais1 = new AIS_Shape(S);
153 myAISContext->SetColor(ais1,Quantity_NOC_GREEN,Standard_False);
154 myAISContext->SetMaterial(ais1,Graphic3d_NOM_PLASTIC,Standard_False);
155 myAISContext->Display(ais1,Standard_False);
156 gp_Trsf theTransformation;
157 gp_Ax1 axe = gp_Ax1(gp_Pnt(110,60,60),gp_Dir(0.,1.,0.));
158 Handle(Geom_Axis1Placement) Gax1 = new Geom_Axis1Placement(axe);
159 Handle (AIS_Axis) ax1 = new AIS_Axis(Gax1);
160 myAISContext->Display(ax1,Standard_False);
161 theTransformation.SetMirror(axe);
162 BRepBuilderAPI_Transform myBRepTransformation(S,theTransformation);
163 TopoDS_Shape S2 = myBRepTransformation.Shape();
164 Handle(AIS_Shape) ais2 = new AIS_Shape(S2);
165 myAISContext->SetColor(ais2,Quantity_NOC_BLUE1,Standard_False);
166 myAISContext->SetMaterial(ais2,Graphic3d_NOM_PLASTIC,Standard_False);
167 myAISContext->Display(ais2,Standard_False);
170 TCollection_AsciiString Message ("\
172 TopoDS_Shape S = BRepBuilderAPI_MakeWedge(60.,100.,80.,20.); \n\
173 gp_Trsf theTransformation; \n\
174 gp_Ax1 Axis = gp_Ax1(gp_Pnt(110,60,60),gp_Dir(0.,1.,0.)); \n\
175 theTransformation.SetMirror(Axis);\n\
176 BRepBuilderAPI_Transform myBRepTransformation(S,theTransformation);\n\
177 TopoDS_Shape TransformedShape = myBRepTransformation.Shape(); \n");
179 PocessTextInDialog("Transform a Shape with Mirror and One axis.", Message);
184 void CModelingDoc::OnRotate()
186 AIS_ListOfInteractive aList;
187 myAISContext->DisplayedObjects(aList);
188 AIS_ListIteratorOfListOfInteractive aListIterator;
189 for(aListIterator.Initialize(aList);aListIterator.More();aListIterator.Next()){
190 myAISContext->Remove (aListIterator.Value(), Standard_False);
192 TopoDS_Shape S = BRepPrimAPI_MakeWedge(60.,100.,80.,20.).Shape();
193 Handle(AIS_Shape) ais1 = new AIS_Shape(S);
194 myAISContext->SetColor(ais1,Quantity_NOC_GREEN,Standard_False);
195 myAISContext->SetMaterial(ais1,Graphic3d_NOM_PLASTIC,Standard_False);
196 myAISContext->Display(ais1,Standard_False);
197 gp_Trsf theTransformation;
198 gp_Ax1 axe = gp_Ax1(gp_Pnt(200,60,60),gp_Dir(0.,1.,0.));
199 Handle(Geom_Axis1Placement) Gax1 = new Geom_Axis1Placement(axe);
200 Handle (AIS_Axis) ax1 = new AIS_Axis(Gax1);
201 myAISContext->Display(ax1,Standard_False);
202 theTransformation.SetRotation(axe,30*M_PI/180);
203 BRepBuilderAPI_Transform myBRepTransformation(S,theTransformation);
204 TopoDS_Shape S2 = myBRepTransformation.Shape();
205 Handle(AIS_Shape) ais2 = new AIS_Shape(S2);
206 myAISContext->SetColor(ais2,Quantity_NOC_BLUE1,Standard_False);
207 myAISContext->SetMaterial(ais2,Graphic3d_NOM_PLASTIC,Standard_False);
208 myAISContext->Display(ais2,Standard_False);
211 TCollection_AsciiString Message ("\
213 TopoDS_Shape S = BRepBuilderAPI_MakeWedge(60.,100.,80.,20.); \n\
214 gp_Trsf theTransformation; \n\
215 gp_Ax1 Axis = gp_Ax1(gp_Pnt(200,60,60),gp_Dir(0.,1.,0.)); \n\
216 theTransformation.SetRotation(Axis,30*PI/180); // Rotation of 30 degrees \n\
217 BRepBuilderAPI_Transform myBRepTransformation(S,theTransformation);\n\
218 TopoDS_Shape TransformedShape = myBRepTransformation.Shape(); \n");
220 PocessTextInDialog("Transform a Shape with Rotation.", Message);
224 void CModelingDoc::OnScale()
226 AIS_ListOfInteractive aList;
227 myAISContext->DisplayedObjects(aList);
228 AIS_ListIteratorOfListOfInteractive aListIterator;
229 for(aListIterator.Initialize(aList);aListIterator.More();aListIterator.Next()){
230 myAISContext->Remove (aListIterator.Value(), Standard_False);
232 TopoDS_Shape S = BRepPrimAPI_MakeWedge(60.,100.,80.,20.).Shape();
233 Handle(AIS_Shape) ais1 = new AIS_Shape(S);
234 myAISContext->SetColor(ais1,Quantity_NOC_GREEN,Standard_False);
235 myAISContext->SetMaterial(ais1,Graphic3d_NOM_PLASTIC,Standard_False);
236 myAISContext->Display(ais1,Standard_False);
237 gp_Trsf theTransformation;
238 gp_Pnt theCenterOfScale(200,60,60);
239 Handle(AIS_Point) aispnt = new AIS_Point(new Geom_CartesianPoint(theCenterOfScale));
241 myAISContext->Display(aispnt,Standard_False);
242 theTransformation.SetScale(theCenterOfScale,0.5);
243 BRepBuilderAPI_Transform myBRepTransformation(S,theTransformation);
244 TopoDS_Shape S2 = myBRepTransformation.Shape();
246 Handle(AIS_Shape) ais2 = new AIS_Shape(S2);
247 myAISContext->SetColor(ais2,Quantity_NOC_BLUE1,Standard_False);
248 myAISContext->SetMaterial(ais2,Graphic3d_NOM_PLASTIC,Standard_False);
249 myAISContext->Display(ais2,Standard_False);
252 TCollection_AsciiString Message ("\
254 TopoDS_Shape S = BRepBuilderAPI_MakeWedge(60.,100.,80.,20.); \n\
255 gp_Trsf theTransformation; \n\
256 gp_Pnt theCenterOfScale(200,60,60); \n\
257 theTransformation.SetScale(theCenterOfScale,0.5); // Scale : value = 0.5 \n\
258 BRepBuilderAPI_Transform myBRepTransformation(S,theTransformation);\n\
259 TopoDS_Shape TransformedShape = myBRepTransformation.Shape(); \n");
261 PocessTextInDialog("Scale a Shape with One point.", Message);
268 void CModelingDoc::OnTranslation()
270 AIS_ListOfInteractive aList;
271 myAISContext->DisplayedObjects(aList);
272 AIS_ListIteratorOfListOfInteractive aListIterator;
273 for(aListIterator.Initialize(aList);aListIterator.More();aListIterator.Next()){
274 myAISContext->Remove (aListIterator.Value(), Standard_False);
276 TopoDS_Shape S = BRepPrimAPI_MakeWedge(6.,10.,8.,2.).Shape();
277 Handle(AIS_Shape) ais1 = new AIS_Shape(S);
278 myAISContext->SetColor(ais1,Quantity_NOC_GREEN,Standard_False);
279 myAISContext->SetMaterial(ais1,Graphic3d_NOM_PLASTIC,Standard_False);
280 myAISContext->Display(ais1,Standard_False);
281 gp_Trsf theTransformation;
282 gp_Vec theVectorOfTranslation(-6,-6,6);
284 Handle(ISession_Direction) aDirection1 = new ISession_Direction(gp_Pnt(0,0,0),theVectorOfTranslation);
285 myAISContext->Display(aDirection1,Standard_False);
287 theTransformation.SetTranslation(theVectorOfTranslation);
288 BRepBuilderAPI_Transform myBRepTransformation(S,theTransformation);
289 TopoDS_Shape S2 = myBRepTransformation.Shape();
291 Handle(AIS_Shape) ais2 = new AIS_Shape(S2);
292 myAISContext->SetColor(ais2,Quantity_NOC_BLUE1,Standard_False);
293 myAISContext->SetMaterial(ais2,Graphic3d_NOM_PLASTIC,Standard_False);
294 myAISContext->Display(ais2,Standard_False);
298 TCollection_AsciiString Message ("\
300 TopoDS_Shape S = BRepBuilderAPI_MakeWedge(6.,10.,8.,2.); \n\
301 gp_Trsf theTransformation; \n\
302 gp_Vec theVectorOfTranslation(6,6,6); \n\
303 theTransformation.SetTranslation(theVectorOfTranslation); \n\
304 BRepBuilderAPI_Transform myBRepTransformation(S,theTransformation);\n\
305 TopoDS_Shape TransformedShape = myBRepTransformation.Shape(); \n");
307 PocessTextInDialog("Translate a Shape with One vector.", Message);
311 void CModelingDoc::OnDisplacement()
313 AIS_ListOfInteractive aList;
314 myAISContext->DisplayedObjects(aList);
315 AIS_ListIteratorOfListOfInteractive aListIterator;
316 for(aListIterator.Initialize(aList);aListIterator.More();aListIterator.Next()){
317 myAISContext->Remove (aListIterator.Value(), Standard_False);
319 TopoDS_Shape S = BRepPrimAPI_MakeWedge(60., 100., 80., 20.).Shape();
320 Handle(AIS_Shape) ais1 = new AIS_Shape(S);
321 myAISContext->SetColor(ais1,Quantity_NOC_GREEN,Standard_False);
322 myAISContext->SetMaterial(ais1,Graphic3d_NOM_PLASTIC,Standard_False);
323 myAISContext->Display(ais1,Standard_False);
324 gp_Trsf theTransformation;
326 gp_Ax3 ax3_1(gp_Pnt(0,0,0),gp_Dir(0,0,1));
327 gp_Ax3 ax3_2(gp_Pnt(60,60,60),gp_Dir(1,1,1));
329 theTransformation.SetDisplacement(ax3_1,ax3_2);
330 BRepBuilderAPI_Transform myBRepTransformation(S,theTransformation);
331 TopoDS_Shape TransformedShape = myBRepTransformation.Shape();
332 Handle(AIS_Shape) ais2 = new AIS_Shape(TransformedShape);
333 myAISContext->SetColor(ais2,Quantity_NOC_BLUE1,Standard_False);
334 myAISContext->SetMaterial(ais2,Graphic3d_NOM_PLASTIC,Standard_False);
335 myAISContext->Display(ais2,Standard_False);
337 TCollection_AsciiString Message ("\
339 TopoDS_Shape S = BRepBuilderAPI_MakeWedge(60.,100.,80.,20.); \n\
340 gp_Trsf theTransformation; \n\
341 gp_Ax3 ax3_1(gp_Pnt(0,0,0),gp_Dir(0,0,1)); \n\
342 gp_Ax3 ax3_2(gp_Pnt(60,60,60),gp_Dir(1,1,1)); \n\
343 theTransformation.SetDisplacement(ax3_1,ax3_2); \n\
344 BRepBuilderAPI_Transform myBRepTransformation(S,theTransformation);\n\
345 TopoDS_Shape TransformedShape = myBRepTransformation.Shape(); \n");
347 PocessTextInDialog("Displace a Shape with Two coordinate systems.", Message);
353 void CModelingDoc::OnDeform()
355 AIS_ListOfInteractive aList;
356 myAISContext->DisplayedObjects(aList);
357 AIS_ListIteratorOfListOfInteractive aListIterator;
358 for(aListIterator.Initialize(aList);aListIterator.More();aListIterator.Next()){
359 myAISContext->Remove (aListIterator.Value(), Standard_False);
361 TopoDS_Shape S = BRepPrimAPI_MakeWedge(60., 100., 80., 20.).Shape();
362 Handle(AIS_Shape) ais1 = new AIS_Shape(S);
363 myAISContext->SetColor(ais1,Quantity_NOC_GREEN,Standard_False);
364 myAISContext->SetMaterial(ais1,Graphic3d_NOM_PLASTIC,Standard_False);
365 myAISContext->Display(ais1,Standard_False);
367 gp_GTrsf theTransformation;
368 gp_Mat rot(1, 0, 0, 0, 0.5, 0, 0, 0, 1.5);
369 theTransformation.SetVectorialPart(rot);
370 theTransformation.SetTranslationPart(gp_XYZ(5,5,5));
372 BRepBuilderAPI_GTransform myBRepTransformation(S,theTransformation);
373 TopoDS_Shape S2 = myBRepTransformation.Shape();
375 Handle(AIS_Shape) ais2 = new AIS_Shape(S2);
376 myAISContext->SetColor(ais2,Quantity_NOC_BLUE1,Standard_False);
377 myAISContext->SetMaterial(ais2,Graphic3d_NOM_PLASTIC,Standard_False);
378 myAISContext->Display(ais2,Standard_False);
380 TCollection_AsciiString Message ("\
382 TopoDS_Shape S = BRepBuilderAPI_MakeWedge(60.,100.,80.,20.); \n\
383 gp_GTrsf theTransformation; \n\
384 gp_Mat rot(1, 0, 0, 0, 0.5, 0, 0, 0, 1.5); // scaling : 100% on X ; 50% on Y ; 150% on Z . \n\
385 theTransformation.SetVectorialPart(rot); \n\
386 theTransformation.SetTranslationPart(gp_XYZ(5,5,5)); \n\
387 BRepBuilderAPI_GTransform myBRepGTransformation(S,theTransformation);\n\
388 TopoDS_Shape TransformedShape = myBRepGTransformation.Shape(); \n");
390 PocessTextInDialog("Deform a Shape with One matrix of deformation and One translation.", Message);
393 /* =================================================================================
394 ==================== P R I M I T I V E S ====================================
395 ================================================================================= */
397 void CModelingDoc::OnBox()
399 AIS_ListOfInteractive aList;
400 myAISContext->DisplayedObjects(aList);
401 AIS_ListIteratorOfListOfInteractive aListIterator;
402 for(aListIterator.Initialize(aList);aListIterator.More();aListIterator.Next()){
403 myAISContext->Remove (aListIterator.Value(), Standard_False);
405 TopoDS_Shape B1 = BRepPrimAPI_MakeBox(200., 150., 100.).Shape();
406 Handle(AIS_Shape) aBox1 = new AIS_Shape(B1);
407 myAISContext->SetMaterial(aBox1,Graphic3d_NOM_PLASTIC,Standard_False);
408 myAISContext->SetColor(aBox1,Quantity_NOC_GREEN,Standard_False);
409 myAISContext->Display(aBox1,Standard_False);
410 TopoDS_Shape B2 = BRepPrimAPI_MakeBox (gp_Ax2(gp_Pnt(-200.,-80.,-70.),
412 80., 90., 120.).Shape();
413 Handle(AIS_Shape) aBox2 = new AIS_Shape(B2);
414 myAISContext->SetMaterial(aBox2,Graphic3d_NOM_PLASTIC,Standard_False);
415 myAISContext->SetColor(aBox2,Quantity_NOC_RED,Standard_False);
416 myAISContext->Display(aBox2,Standard_False);
418 TCollection_AsciiString Message ("\
420 TopoDS_Shape B1 = BRepPrimAPI_MakeBox (200.,150.,100.); \n\
421 TopoDS_Shape B2 = BRepPrimAPI_MakeBox (gp_Ax2(gp_Pnt(-200.,-80.,-70.), \n\
422 gp_Dir(1.,2.,1.)), \n\
425 PocessTextInDialog("Make a topological box", Message);
428 void CModelingDoc::OnCylinder()
430 AIS_ListOfInteractive aList;
431 myAISContext->DisplayedObjects(aList);
432 AIS_ListIteratorOfListOfInteractive aListIterator;
433 for(aListIterator.Initialize(aList);aListIterator.More();aListIterator.Next()){
434 myAISContext->Remove (aListIterator.Value(), Standard_False);
437 TopoDS_Shape C1 = BRepPrimAPI_MakeCylinder(50., 200.).Shape();
438 Handle(AIS_Shape) aCyl1 = new AIS_Shape(C1);
439 myAISContext->SetMaterial(aCyl1,Graphic3d_NOM_PLASTIC,Standard_False);
440 myAISContext->SetColor(aCyl1,Quantity_NOC_RED,Standard_False);
441 myAISContext->Display(aCyl1,Standard_False);
442 TopoDS_Shape C2 = BRepPrimAPI_MakeCylinder (gp_Ax2(gp_Pnt(200.,200.,0.),
444 40., 110., 210.*M_PI / 180).Shape();
445 Handle(AIS_Shape) aCyl2 = new AIS_Shape(C2);
446 myAISContext->SetMaterial(aCyl2,Graphic3d_NOM_PLASTIC,Standard_False);
447 myAISContext->SetColor(aCyl2,Quantity_NOC_MATRABLUE,Standard_False);
448 myAISContext->Display(aCyl2,Standard_False);
451 TCollection_AsciiString Message ("\
453 TopoDS_Shape C1 = BRepPrimAPI_MakeCylinder (50.,200.); \n\
454 TopoDS_Shape C2 = BRepPrimAPI_MakeCylinder (gp_Ax2(gp_Pnt(200.,200.,0.), \n\
455 gp_Dir(0.,0.,1.)), \n\
456 40.,110.,210.*PI180.); \n\
458 PocessTextInDialog("Make a cylinder", Message);
462 void CModelingDoc::OnCone()
464 AIS_ListOfInteractive aList;
465 myAISContext->DisplayedObjects(aList);
466 AIS_ListIteratorOfListOfInteractive aListIterator;
467 for(aListIterator.Initialize(aList);aListIterator.More();aListIterator.Next()){
468 myAISContext->Remove (aListIterator.Value(), Standard_False);
470 TopoDS_Shape C1 = BRepPrimAPI_MakeCone(50., 25., 200.).Shape();
471 Handle(AIS_Shape) ais1 = new AIS_Shape(C1);
472 myAISContext->SetMaterial(ais1,Graphic3d_NOM_PLASTIC,Standard_False);
473 myAISContext->SetColor(ais1,Quantity_NOC_MATRABLUE,Standard_False);
474 myAISContext->Display(ais1,Standard_False);
475 TopoDS_Shape C2 = BRepPrimAPI_MakeCone(gp_Ax2(gp_Pnt(100.,100.,0.),
477 60., 0., 150., 210.*M_PI / 180).Shape();
478 Handle(AIS_Shape) ais2 = new AIS_Shape(C2);
479 myAISContext->SetMaterial(ais2,Graphic3d_NOM_PLASTIC,Standard_False);
480 myAISContext->SetColor(ais2,Quantity_NOC_GREEN,Standard_False);
481 myAISContext->Display(ais2,Standard_False);
484 TCollection_AsciiString Message ("\
486 TopoDS_Shape C1 = BRepPrimAPI_MakeCone (50.,25.,200.); \n\
487 TopoDS_Shape C2 = BRepPrimAPI_MakeCone(gp_Ax2(gp_Pnt(100.,100.,0.), \n\
488 gp_Dir(0.,0.,1.)), \n\
489 605.,0.,150.,210.*PI180); \n\
491 PocessTextInDialog("Make a cone", Message);
494 void CModelingDoc::OnSphere()
496 AIS_ListOfInteractive aList;
497 myAISContext->DisplayedObjects(aList);
498 AIS_ListIteratorOfListOfInteractive aListIterator;
499 for(aListIterator.Initialize(aList);aListIterator.More();aListIterator.Next()){
500 myAISContext->Remove (aListIterator.Value(), Standard_False);
503 TopoDS_Shape S1 = BRepPrimAPI_MakeSphere(gp_Pnt(-200., -250., 0.), 80.).Shape();
504 Handle(AIS_Shape) ais1 = new AIS_Shape(S1);
505 myAISContext->SetColor(ais1,Quantity_NOC_AZURE,Standard_False);
506 myAISContext->SetMaterial(ais1,Graphic3d_NOM_PLASTIC,Standard_False);
507 myAISContext->Display(ais1,Standard_False);
508 TopoDS_Shape S2 = BRepPrimAPI_MakeSphere(100., 120.*M_PI / 180).Shape();
509 Handle(AIS_Shape) ais2 = new AIS_Shape(S2);
510 myAISContext->SetColor(ais2,Quantity_NOC_GREEN,Standard_False);
511 myAISContext->SetMaterial(ais2,Graphic3d_NOM_PLASTIC,Standard_False);
512 myAISContext->Display(ais2,Standard_False);
513 TopoDS_Shape S3 = BRepPrimAPI_MakeSphere(gp_Pnt(200.,250.,0.),100.,
514 -60.*M_PI / 180, 60.*M_PI / 180).Shape();
515 Handle(AIS_Shape) ais3 = new AIS_Shape(S3);
516 myAISContext->SetColor(ais3,Quantity_NOC_RED,Standard_False);
517 myAISContext->SetMaterial(ais3,Graphic3d_NOM_PLASTIC,Standard_False);
518 myAISContext->Display(ais3,Standard_False);
519 TopoDS_Shape S4 = BRepPrimAPI_MakeSphere(gp_Pnt(0.,0.,-300.),150.,
520 -45.*M_PI / 180, 45.*M_PI / 180, 45.*M_PI / 180).Shape();
521 Handle(AIS_Shape) ais4 = new AIS_Shape(S4);
522 myAISContext->SetColor(ais4,Quantity_NOC_MATRABLUE,Standard_False);
523 myAISContext->SetMaterial(ais4,Graphic3d_NOM_PLASTIC,Standard_False);
524 myAISContext->Display(ais4,Standard_False);
527 TCollection_AsciiString Message ("\
529 TopoDS_Shape S1 = BRepPrimAPI_MakeSphere(gp_Pnt(-200.,-250.,0.),80.); \n\
530 TopoDS_Shape S2 = BRepPrimAPI_MakeSphere(100.,120.*PI180); \n\
531 TopoDS_Shape S3 = BRepPrimAPI_MakeSphere(gp_Pnt(200.,250.,0.),100., \n\
532 -60.*PI180, 60.*PI180); \n\
533 TopoDS_Shape S4 = BRepPrimAPI_MakeSphere(gp_Pnt(0.,0.,-300.),150., \n\
534 -45.*PI180, 45.*PI180, 45.*PI180); \n\
536 PocessTextInDialog("Make a sphere", Message);
539 void CModelingDoc::OnTorus()
541 AIS_ListOfInteractive aList;
542 myAISContext->DisplayedObjects(aList);
543 AIS_ListIteratorOfListOfInteractive aListIterator;
544 for(aListIterator.Initialize(aList);aListIterator.More();aListIterator.Next()){
545 myAISContext->Remove (aListIterator.Value(), Standard_False);
548 TopoDS_Shape S1 = BRepPrimAPI_MakeTorus(60., 20.).Shape();
549 Handle(AIS_Shape) ais1 = new AIS_Shape(S1);
550 myAISContext->SetColor(ais1,Quantity_NOC_AZURE,Standard_False);
551 myAISContext->SetMaterial(ais1,Graphic3d_NOM_PLASTIC,Standard_False);
552 myAISContext->Display(ais1,Standard_False);
553 TopoDS_Shape S2 = BRepPrimAPI_MakeTorus(gp_Ax2(gp_Pnt(100.,100.,0.),gp_Dir(1.,1.,1.)),
554 50., 20., 210.*M_PI / 180).Shape();
555 Handle(AIS_Shape) ais2 = new AIS_Shape(S2);
556 myAISContext->SetColor(ais2,Quantity_NOC_GREEN,Standard_False);
557 myAISContext->SetMaterial(ais2,Graphic3d_NOM_PLASTIC,Standard_False);
558 myAISContext->Display(ais2,Standard_False);
559 TopoDS_Shape S3 = BRepPrimAPI_MakeTorus(gp_Ax2(gp_Pnt(-200.,-150.,-100),gp_Dir(0.,1.,0.)),
560 60., 20., -45.*M_PI / 180, 45.*M_PI / 180, 90.*M_PI / 180).Shape();
561 Handle(AIS_Shape) ais3= new AIS_Shape(S3);
562 myAISContext->SetColor(ais3,Quantity_NOC_CORAL,Standard_False);
563 myAISContext->SetMaterial(ais3,Graphic3d_NOM_PLASTIC,Standard_False);
564 myAISContext->Display(ais3,Standard_False);
567 TCollection_AsciiString Message ("\
569 TopoDS_Shape S1 = BRepPrimAPI_MakeTorus(60.,20.); \n\
570 TopoDS_Shape S2 = BRepPrimAPI_MakeTorus(gp_Ax2(gp_Pnt(100.,100.,0.),gp_Dir(1.,1.,1.)), \n\
571 50.,20.,210.*PI180); \n\
572 TopoDS_Shape S3 = BRepPrimAPI_MakeTorus(gp_Ax2(gp_Pnt(-200.,-150.,-100),gp_Dir(0.,1.,0.)), \n\
573 60.,20.,-45.*PI180,45.*PI180,90.*PI180); \n\
575 PocessTextInDialog("Make a torus", Message);
578 void CModelingDoc::OnWedge()
580 AIS_ListOfInteractive aList;
581 myAISContext->DisplayedObjects(aList);
582 AIS_ListIteratorOfListOfInteractive aListIterator;
583 for(aListIterator.Initialize(aList);aListIterator.More();aListIterator.Next()){
584 myAISContext->Remove (aListIterator.Value(), Standard_False);
587 TopoDS_Shape S1 = BRepPrimAPI_MakeWedge(60., 100., 80., 20.).Shape();
588 Handle(AIS_Shape) ais1 = new AIS_Shape(S1);
589 myAISContext->SetColor(ais1,Quantity_NOC_AZURE,Standard_False);
590 myAISContext->SetMaterial(ais1,Graphic3d_NOM_PLASTIC,Standard_False);
591 myAISContext->Display(ais1,Standard_False);
592 TopoDS_Shape S2 = BRepPrimAPI_MakeWedge(gp_Ax2(gp_Pnt(100.,100.,0.),gp_Dir(0.,0.,1.)),
593 60., 50., 80., 25., -10., 40., 70.).Shape();
594 Handle(AIS_Shape) ais2 = new AIS_Shape(S2);
595 myAISContext->SetColor(ais2,Quantity_NOC_CORAL2,Standard_False);
596 myAISContext->SetMaterial(ais2,Graphic3d_NOM_PLASTIC,Standard_False);
597 myAISContext->Display(ais2,Standard_False);
600 TCollection_AsciiString Message ("\
602 TopoDS_Shape S1 = BRepPrimAPI_MakeWedge(60.,100.,80.,20.); \n\
603 TopoDS_Shape S2 = BRepPrimAPI_MakeWedge(gp_Ax2(gp_Pnt(100.,100.,0.),gp_Dir(0.,0.,1.)), \n\
604 60.,50.,80.,25.,-10.,40.,70.); \n\
606 PocessTextInDialog("Make a wedge", Message);
609 void CModelingDoc::OnPrism()
611 AIS_ListOfInteractive aList;
612 myAISContext->DisplayedObjects(aList);
613 AIS_ListIteratorOfListOfInteractive aListIterator;
614 for(aListIterator.Initialize(aList);aListIterator.More();aListIterator.Next()){
615 myAISContext->Remove (aListIterator.Value(), Standard_False);
618 TopoDS_Vertex V1 = BRepBuilderAPI_MakeVertex(gp_Pnt(-200.,-200.,0.));
619 Handle(AIS_Shape) ais1 = new AIS_Shape(V1);
620 myAISContext->Display(ais1,Standard_False);
621 TopoDS_Shape S1 = BRepPrimAPI_MakePrism(V1,gp_Vec(0.,0.,100.));
622 Handle(AIS_Shape) ais2 = new AIS_Shape(S1);
623 myAISContext->Display(ais2,Standard_False);
625 TopoDS_Edge E = BRepBuilderAPI_MakeEdge(gp_Pnt(-150.,-150,0.), gp_Pnt(-50.,-50,0.));
626 Handle(AIS_Shape) ais3 = new AIS_Shape(E);
627 myAISContext->Display(ais3,Standard_False);
628 TopoDS_Shape S2 = BRepPrimAPI_MakePrism(E,gp_Vec(0.,0.,100.));
629 Handle(AIS_Shape) ais4 = new AIS_Shape(S2);
630 myAISContext->SetColor(ais4,Quantity_NOC_CORAL2,Standard_False);
631 myAISContext->SetMaterial(ais4,Graphic3d_NOM_PLASTIC,Standard_False);
632 myAISContext->Display(ais4,Standard_False);
634 TopoDS_Edge E1 = BRepBuilderAPI_MakeEdge(gp_Pnt(0.,0.,0.), gp_Pnt(50.,0.,0.));
635 TopoDS_Edge E2 = BRepBuilderAPI_MakeEdge(gp_Pnt(50.,0.,0.), gp_Pnt(50.,50.,0.));
636 TopoDS_Edge E3 = BRepBuilderAPI_MakeEdge(gp_Pnt(50.,50.,0.), gp_Pnt(0.,0.,0.));
637 TopoDS_Wire W = BRepBuilderAPI_MakeWire(E1,E2,E3);
638 TopoDS_Shape S3 = BRepPrimAPI_MakePrism(W,gp_Vec(0.,0.,100.));
639 Handle(AIS_Shape) ais5 = new AIS_Shape(W);
640 myAISContext->Display(ais5,Standard_False);
641 Handle(AIS_Shape) ais6 = new AIS_Shape(S3);
642 myAISContext->SetColor(ais6,Quantity_NOC_GREEN,Standard_False);
643 myAISContext->SetMaterial(ais6,Graphic3d_NOM_PLASTIC,Standard_False);
644 myAISContext->Display(ais6,Standard_False);
646 gp_Circ c = gp_Circ(gp_Ax2(gp_Pnt(200.,200.,0.),gp_Dir(0.,0.,1.)), 80.);
647 TopoDS_Edge Ec = BRepBuilderAPI_MakeEdge(c);
648 TopoDS_Wire Wc = BRepBuilderAPI_MakeWire(Ec);
649 TopoDS_Face F = BRepBuilderAPI_MakeFace(gp_Pln(gp::XOY()),Wc);
650 Handle(AIS_Shape) ais7 = new AIS_Shape(F);
651 myAISContext->Display(ais7,Standard_False);
652 TopoDS_Shape S4 = BRepPrimAPI_MakePrism(F,gp_Vec(0.,0.,100.));
653 Handle(AIS_Shape) ais8 = new AIS_Shape(S4);
654 myAISContext->SetColor(ais8,Quantity_NOC_MATRABLUE,Standard_False);
655 myAISContext->SetMaterial(ais8,Graphic3d_NOM_PLASTIC,Standard_False);
656 myAISContext->Display(ais8,Standard_False);
659 TCollection_AsciiString Message ("\
661 --- Prism a vertex -> result is an edge --- \n\
663 TopoDS_Vertex V1 = BRepBuilderAPI_MakeVertex(gp_Pnt(-200.,-200.,0.)); \n\
664 TopoDS_Shape S1 = BRepBuilderAPI_MakePrism(V1,gp_Vec(0.,0.,100.)); \n\
666 --- Prism an edge -> result is a face --- \n\
668 TopoDS_Edge E = BRepBuilderAPI_MakeEdge(gp_Pnt(-150.,-150,0.), gp_Pnt(-50.,-50,0.)); \n\
669 TopoDS_Shape S2 = BRepPrimAPI_MakePrism(E,gp_Vec(0.,0.,100.)); \n\
671 --- Prism an wire -> result is a shell --- \n\
673 TopoDS_Edge E1 = BREpBuilderAPI_MakeEdge(gp_Pnt(0.,0.,0.), gp_Pnt(50.,0.,0.)); \n\
674 TopoDS_Edge E2 = BREpBuilderAPI_MakeEdge(gp_Pnt(50.,0.,0.), gp_Pnt(50.,50.,0.)); \n\
675 TopoDS_Edge E3 = BREpBuilderAPI_MakeEdge(gp_Pnt(50.,50.,0.), gp_Pnt(0.,0.,0.)); \n\
676 TopoDS_Wire W = BRepBuilderAPI_MakeWire(E1,E2,E3); \n\
677 TopoDS_Shape S3 = BRepPrimAPI_MakePrism(W,gp_Vec(0.,0.,100.)); \n\
679 --- Prism a face or a shell -> result is a solid --- \n\
681 gp_Circ c = gp_Circ(gp_Ax2(gp_Pnt(200.,200.,0.gp_Dir(0.,0.,1.)), 80.); \n\
682 TopoDS_Edge Ec = BRepBuilderAPI_MakeEdge(c); \n\
683 TopoDS_Wire Wc = BRepBuilderAPI_MakeWire(Ec); \n\
684 TopoDS_Face F = BRepBuilderAPI_MakeFace(gp::XOY(),Wc); \n\
685 TopoDS_Shape S4 = BRepBuilderAPI_MakePrism(F,gp_Vec(0.,0.,100.)); \n\
687 PocessTextInDialog("Make a prism", Message);
690 void CModelingDoc::OnRevol()
692 AIS_ListOfInteractive aList;
693 myAISContext->DisplayedObjects(aList);
694 AIS_ListIteratorOfListOfInteractive aListIterator;
695 for(aListIterator.Initialize(aList);aListIterator.More();aListIterator.Next()){
696 myAISContext->Remove (aListIterator.Value(), Standard_False);
699 TopoDS_Vertex V1 = BRepBuilderAPI_MakeVertex(gp_Pnt(-200.,-200.,0.));
700 Handle(AIS_Shape) ais1 = new AIS_Shape(V1);
701 myAISContext->Display(ais1,Standard_False);
702 gp_Ax1 axe = gp_Ax1(gp_Pnt(-170.,-170.,0.),gp_Dir(0.,0.,1.));
703 Handle(Geom_Axis1Placement) Gax1 = new Geom_Axis1Placement(axe);
704 Handle (AIS_Axis) ax1 = new AIS_Axis(Gax1);
705 myAISContext->Display(ax1,Standard_False);
706 TopoDS_Shape S1 = BRepPrimAPI_MakeRevol(V1,axe);
707 Handle(AIS_Shape) ais2 = new AIS_Shape(S1);
708 myAISContext->Display(ais2,Standard_False);
710 TopoDS_Edge E = BRepBuilderAPI_MakeEdge(gp_Pnt(-120.,-120,0.), gp_Pnt(-120.,-120,100.));
711 Handle(AIS_Shape) ais3 = new AIS_Shape(E);
712 myAISContext->Display(ais3,Standard_False);
713 axe = gp_Ax1(gp_Pnt(-100.,-100.,0.),gp_Dir(0.,0.,1.));
714 Handle(Geom_Axis1Placement) Gax2 = new Geom_Axis1Placement(axe);
715 Handle (AIS_Axis) ax2 = new AIS_Axis(Gax2);
716 myAISContext->Display(ax2,Standard_False);
717 TopoDS_Shape S2 = BRepPrimAPI_MakeRevol(E,axe);
718 Handle(AIS_Shape) ais4 = new AIS_Shape(S2);
719 myAISContext->SetColor(ais4,Quantity_NOC_YELLOW,Standard_False);
720 myAISContext->SetMaterial(ais4,Graphic3d_NOM_PLASTIC,Standard_False);
721 myAISContext->Display(ais4,Standard_False);
723 TopoDS_Edge E1 = BRepBuilderAPI_MakeEdge(gp_Pnt(0.,0.,0.), gp_Pnt(50.,0.,0.));
724 TopoDS_Edge E2 = BRepBuilderAPI_MakeEdge(gp_Pnt(50.,0.,0.), gp_Pnt(50.,50.,0.));
725 TopoDS_Edge E3 = BRepBuilderAPI_MakeEdge(gp_Pnt(50.,50.,0.), gp_Pnt(0.,0.,0.));
726 TopoDS_Wire W = BRepBuilderAPI_MakeWire(E1,E2,E3);
727 axe = gp_Ax1(gp_Pnt(0.,0.,30.),gp_Dir(0.,1.,0.));
728 Handle(Geom_Axis1Placement) Gax3 = new Geom_Axis1Placement(axe);
729 Handle (AIS_Axis) ax3 = new AIS_Axis(Gax3);
730 myAISContext->Display(ax3,Standard_False);
731 TopoDS_Shape S3 = BRepPrimAPI_MakeRevol(W,axe, 210.*M_PI/180);
732 Handle(AIS_Shape) ais5 = new AIS_Shape(W);
733 myAISContext->Display(ais5,Standard_False);
734 Handle(AIS_Shape) ais6 = new AIS_Shape(S3);
735 myAISContext->SetColor(ais6,Quantity_NOC_GREEN,Standard_False);
736 myAISContext->SetMaterial(ais6,Graphic3d_NOM_PLASTIC,Standard_False);
737 myAISContext->Display(ais6,Standard_False);
739 gp_Circ c = gp_Circ(gp_Ax2(gp_Pnt(200.,200.,0.),gp_Dir(0.,0.,1.)), 80.);
740 TopoDS_Edge Ec = BRepBuilderAPI_MakeEdge(c);
741 TopoDS_Wire Wc = BRepBuilderAPI_MakeWire(Ec);
742 TopoDS_Face F = BRepBuilderAPI_MakeFace(gp_Pln(gp::XOY()),Wc);
743 axe = gp_Ax1(gp_Pnt(290,290.,0.),gp_Dir(0.,1,0.));
744 Handle(Geom_Axis1Placement) Gax4 = new Geom_Axis1Placement(axe);
745 Handle (AIS_Axis) ax4 = new AIS_Axis(Gax4);
746 myAISContext->Display(ax4,Standard_False);
747 TopoDS_Shape S4 = BRepPrimAPI_MakeRevol(F,axe, 90.*M_PI/180);
748 Handle(AIS_Shape) ais8 = new AIS_Shape(S4);
749 myAISContext->SetColor(ais8,Quantity_NOC_MATRABLUE,Standard_False);
750 myAISContext->SetMaterial(ais8,Graphic3d_NOM_PLASTIC,Standard_False);
751 myAISContext->Display(ais8,Standard_False);
754 TCollection_AsciiString Message ("\
756 --- Revol of a vertex -> result is an edge --- \n\
758 TopoDS_Vertex V1 = BRepBuilderAPI_MakeVertex(gp_Pnt(-200.,-200.,0.)); \n\
759 gp_Ax1 axe = gp_Ax1(gp_Pnt(-170.,-170.,0.),gp_Dir(0.,0.,1.)); \n\
760 TopoDS_Shape S1 = BRepPrimAPI_MakeRevol(V1,axe); \n\
762 --- Revol of an edge -> result is a face --- \n\
764 TopoDS_Edge E = BRepBuilderAPI_MakeEdge(gp_Pnt(-120.,-120,0.), gp_Pnt(-120.,-120,100.)); \n\
765 axe = gp_Ax1(gp_Pnt(-100.,-100.,0.),gp_Dir(0.,0.,1.)); \n\
766 TopoDS_Shape S2 = BRepPrimAPI_MakeRevol(E,axe); \n\
768 --- Revol of a wire -> result is a shell --- \n\
770 TopoDS_Edge E1 = BRepBuilderAPI_MakeEdge(gp_Pnt(0.,0.,0.), gp_Pnt(50.,0.,0.)); \n\
771 TopoDS_Edge E2 = BRepBuilderAPI_MakeEdge(gp_Pnt(50.,0.,0.), gp_Pnt(50.,50.,0.)); \n\
772 TopoDS_Edge E3 = BRepBuilderAPI_MakeEdge(gp_Pnt(50.,50.,0.), gp_Pnt(0.,0.,0.)); \n\
773 TopoDS_Wire W = BRepBuilderAPI_MakeWire(E1,E2,E3); \n\
774 axe = gp_Ax1(gp_Pnt(0.,0.,30.),gp_Dir(0.,1.,0.)); \n\
775 TopoDS_Shape S3 = BRepPrimAPI_MakeRevol(W,axe, 210.*PI180); \n\
777 --- Revol of a face -> result is a solid --- \n\
779 gp_Circ c = gp_Circ(gp_Ax2(gp_Pnt(200.,200.,0.),gp_Dir(0.,0.,1.)), 80.); \n\
780 TopoDS_Edge Ec = BRepBuilderAPI_MakeEdge(c); \n\
781 TopoDS_Wire Wc = BRepBuilderPI_MakeWire(Ec); \n\
782 TopoDS_Face F = BRepBuilderAPI_MakeFace(gp_Pln(gp::XOY()),Wc); \n\
783 axe = gp_Ax1(gp_Pnt(290,290.,0.),gp_Dir(0.,1,0.)); \n\
784 TopoDS_Shape S4 = BRepPrimAPI_MakeRevol(F,axe, 90.*PI180); \n\
786 PocessTextInDialog("Make a revol", Message);
789 void CModelingDoc::OnPipe()
791 AIS_ListOfInteractive aList;
792 myAISContext->DisplayedObjects(aList);
793 AIS_ListIteratorOfListOfInteractive aListIterator;
794 for(aListIterator.Initialize(aList);aListIterator.More();aListIterator.Next()){
795 myAISContext->Remove (aListIterator.Value(), Standard_False);
798 TColgp_Array1OfPnt CurvePoles(1,4);
799 gp_Pnt pt = gp_Pnt(0.,0.,0.);
801 pt = gp_Pnt(20.,50.,0.);
803 pt = gp_Pnt(60.,100.,0.);
805 pt = gp_Pnt(150.,0.,0.);
807 Handle(Geom_BezierCurve) curve = new Geom_BezierCurve(CurvePoles);
808 TopoDS_Edge E = BRepBuilderAPI_MakeEdge(curve);
809 TopoDS_Wire W = BRepBuilderAPI_MakeWire(E);
810 Handle(AIS_Shape) ais1 = new AIS_Shape(W);
811 myAISContext->Display(ais1,Standard_False);
814 gp_Circ c = gp_Circ(gp_Ax2(gp_Pnt(0.,0.,0.),gp_Dir(0.,1.,0.)),10.);
815 TopoDS_Edge Ec = BRepBuilderAPI_MakeEdge(c);
816 TopoDS_Wire Wc = BRepBuilderAPI_MakeWire(Ec);
817 Handle(AIS_Shape) ais3 = new AIS_Shape(Wc);
818 myAISContext->Display(ais3,Standard_False);
819 TopoDS_Face F = BRepBuilderAPI_MakeFace(gp_Pln(gp::ZOX()),Wc);
820 TopoDS_Shape S = BRepOffsetAPI_MakePipe(W,F);
821 Handle(AIS_Shape) ais2 = new AIS_Shape(S);
822 myAISContext->SetColor(ais2,Quantity_NOC_MATRABLUE,Standard_False);
823 myAISContext->SetMaterial(ais2,Graphic3d_NOM_PLASTIC,Standard_False);
824 myAISContext->Display(ais2,Standard_False);
827 TCollection_AsciiString Message ("\
829 TColgp_Array1OfPnt CurvePoles(1,6);\n\
830 gp_Pnt pt = gp_Pnt(0.,0.,0.);\n\
831 CurvePoles(1) = pt;\n\
832 pt = gp_Pnt(20.,50.,0.);\n\
833 CurvePoles(2) = pt;\n\
834 pt = gp_Pnt(60.,100.,0.);\n\
835 CurvePoles(3) = pt;\n\
836 pt = gp_Pnt(150.,0.,0.);\n\
837 CurvePoles(4) = pt;\n\
838 Handle(Geom_BezierCurve) curve = new Geom_BezierCurve(CurvePoles);\n\
839 TopoDS_Edge E = BRepBuilderAPI_MakeEdge(curve);\n\
840 TopoDS_Wire W = BRepBuilderAPI_MakeWire(E);\n\
841 gp_Circ c = gp_Circ(gp_Ax2(gp_Pnt(0.,0.,0.),gp_Dir(0.,1.,0.)),10.);\n\
842 TopoDS_Edge Ec = BRepBuilderAPI_MakeEdge(c);\n\
843 TopoDS_Wire Wc = BRepBuilderAPI_MakeWire(Ec);\n\
844 TopoDS_Face F = BRepBuilderAPI_MakeFace(gp_Pln(gp::ZOX()),Wc);\n\
845 TopoDS_Shape S = BRepBuilderAPI_MakePipe(W,F);\n\
847 PocessTextInDialog("Make a pipe", Message);
851 void CModelingDoc::OnThru()
853 AIS_ListOfInteractive aList;
854 myAISContext->DisplayedObjects(aList);
855 AIS_ListIteratorOfListOfInteractive aListIterator;
856 for(aListIterator.Initialize(aList);aListIterator.More();aListIterator.Next()){
857 myAISContext->Remove (aListIterator.Value(), Standard_False);
860 gp_Circ c1 = gp_Circ(gp_Ax2(gp_Pnt(-100.,0.,-100.),gp_Dir(0.,0.,1.)),40.);
861 TopoDS_Edge E1 = BRepBuilderAPI_MakeEdge(c1);
862 TopoDS_Wire W1 = BRepBuilderAPI_MakeWire(E1);
863 Handle(AIS_Shape) sec1 = new AIS_Shape(W1);
864 myAISContext->Display(sec1,Standard_False);
865 gp_Circ c2 = gp_Circ(gp_Ax2(gp_Pnt(-10.,0.,-0.),gp_Dir(0.,0.,1.)),40.);
866 TopoDS_Edge E2 = BRepBuilderAPI_MakeEdge(c2);
867 TopoDS_Wire W2 = BRepBuilderAPI_MakeWire(E2);
868 Handle(AIS_Shape) sec2 = new AIS_Shape(W2);
869 myAISContext->Display(sec2,Standard_False);
870 gp_Circ c3 = gp_Circ(gp_Ax2(gp_Pnt(-75.,0.,100.),gp_Dir(0.,0.,1.)),40.);
871 TopoDS_Edge E3 = BRepBuilderAPI_MakeEdge(c3);
872 TopoDS_Wire W3 = BRepBuilderAPI_MakeWire(E3);
873 Handle(AIS_Shape) sec3 = new AIS_Shape(W3);
874 myAISContext->Display(sec3,Standard_False);
875 gp_Circ c4= gp_Circ(gp_Ax2(gp_Pnt(0.,0.,200.),gp_Dir(0.,0.,1.)),40.);
876 TopoDS_Edge E4 = BRepBuilderAPI_MakeEdge(c4);
877 TopoDS_Wire W4 = BRepBuilderAPI_MakeWire(E4);
878 Handle(AIS_Shape) sec4 = new AIS_Shape(W4);
879 myAISContext->Display(sec4,Standard_False);
880 BRepOffsetAPI_ThruSections generator(Standard_False,Standard_True);
881 generator.AddWire(W1);
882 generator.AddWire(W2);
883 generator.AddWire(W3);
884 generator.AddWire(W4);
886 TopoDS_Shape S1 = generator.Shape();
887 Handle(AIS_Shape) ais1 = new AIS_Shape(S1);
888 myAISContext->SetColor(ais1,Quantity_NOC_MATRABLUE,Standard_False);
889 myAISContext->SetMaterial(ais1,Graphic3d_NOM_PLASTIC,Standard_False);
890 myAISContext->Display(ais1,Standard_False);
892 gp_Circ c1b = gp_Circ(gp_Ax2(gp_Pnt(100.,0.,-100.),gp_Dir(0.,0.,1.)),40.);
893 TopoDS_Edge E1b = BRepBuilderAPI_MakeEdge(c1b);
894 TopoDS_Wire W1b = BRepBuilderAPI_MakeWire(E1b);
895 Handle(AIS_Shape) sec1b = new AIS_Shape(W1b);
896 myAISContext->Display(sec1b,Standard_False);
897 gp_Circ c2b = gp_Circ(gp_Ax2(gp_Pnt(210.,0.,-0.),gp_Dir(0.,0.,1.)),40.);
898 TopoDS_Edge E2b = BRepBuilderAPI_MakeEdge(c2b);
899 TopoDS_Wire W2b = BRepBuilderAPI_MakeWire(E2b);
900 Handle(AIS_Shape) sec2b = new AIS_Shape(W2b);
901 myAISContext->Display(sec2b,Standard_False);
902 gp_Circ c3b = gp_Circ(gp_Ax2(gp_Pnt(275.,0.,100.),gp_Dir(0.,0.,1.)),40.);
903 TopoDS_Edge E3b = BRepBuilderAPI_MakeEdge(c3b);
904 TopoDS_Wire W3b = BRepBuilderAPI_MakeWire(E3b);
905 Handle(AIS_Shape) sec3b = new AIS_Shape(W3b);
906 myAISContext->Display(sec3b,Standard_False);
907 gp_Circ c4b= gp_Circ(gp_Ax2(gp_Pnt(200.,0.,200.),gp_Dir(0.,0.,1.)),40.);
908 TopoDS_Edge E4b = BRepBuilderAPI_MakeEdge(c4b);
909 TopoDS_Wire W4b = BRepBuilderAPI_MakeWire(E4b);
910 Handle(AIS_Shape) sec4b = new AIS_Shape(W4b);
911 myAISContext->Display(sec4b,Standard_False);
912 BRepOffsetAPI_ThruSections generatorb(Standard_True,Standard_False);
913 generatorb.AddWire(W1b);
914 generatorb.AddWire(W2b);
915 generatorb.AddWire(W3b);
916 generatorb.AddWire(W4b);
918 TopoDS_Shape S2 = generatorb.Shape();
919 Handle(AIS_Shape) ais2 = new AIS_Shape(S2);
920 myAISContext->SetColor(ais2,Quantity_NOC_ALICEBLUE,Standard_False);
921 myAISContext->SetMaterial(ais2,Graphic3d_NOM_PLASTIC,Standard_False);
922 myAISContext->Display(ais2,Standard_False);
925 TCollection_AsciiString Message ("\
927 ---------- ruled -------------- \n\
929 gp_Circ c1 = gp_Circ(gp_Ax2(gp_Pnt(-100.,0.,-100.),gp_Dir(0.,0.,1.)),40.);\n\
930 TopoDS_Edge E1 = BRepBuilderAPI_MakeEdge(c1);\n\
931 TopoDS_Wire W1 = BRepBuilderAPI_MakeWire(E1);\n\
932 gp_Circ c2 = gp_Circ(gp_Ax2(gp_Pnt(-10.,0.,-0.),gp_Dir(0.,0.,1.)),40.);\n\
933 TopoDS_Edge E2 = BRepBuilderAPI_MakeEdge(c2);\n\
934 TopoDS_Wire W2 = BRepBuilderAPI_MakeWire(E2);\n\
935 gp_Circ c3 = gp_Circ(gp_Ax2(gp_Pnt(-75.,0.,100.),gp_Dir(0.,0.,1.)),40.);\n\
936 TopoDS_Edge E3 = BRepBuilderAPI_MakeEdge(c3);\n\
937 TopoDS_Wire W3 = BRepBuilderAPI_MakeWire(E3);\n\
938 gp_Circ c4= gp_Circ(gp_Ax2(gp_Pnt(0.,0.,200.),gp_Dir(0.,0.,1.)),40.);\n\
939 TopoDS_Edge E4 = BRep>BuilderAPI_MakeEdge(c4);\n\
940 TopoDS_Edge E4 = BRepBuilderAPI_MakeEdge(c4);\n\
941 TopoDS_Edge E4 = BRepBuilderAPI_MakeEdge(c4);\n\
942 TopoDS_Wire W4 = BRepBuilderAPI_MakeWire(E4);\n\
943 BRepOffsetAPI_ThruSections generator(Standard_False,Standard_True);\n\
944 generator.AddWire(W1);\n\
945 generator.AddWire(W2);\n\
946 generator.AddWire(W3);\n\
947 generator.AddWire(W4);\n\
948 generator.Build();\n\
949 TopoDS_Shape S1 = generator.Shape();\n\
951 ---------- smooth -------------- \n\
953 gp_Circ c1b = gp_Circ(gp_Ax2(gp_Pnt(100.,0.,-100.),gp_Dir(0.,0.,1.)),40.); \n\
954 TopoDS_Edge E1b = BRepBuilderAPI_MakeEdge(c1b); \n\
955 TopoDS_Wire W1b = BRepBuilderAPI_MakeWire(E1b); \n\
956 gp_Circ c2b = gp_Circ(gp_Ax2(gp_Pnt(210.,0.,-0.),gp_Dir(0.,0.,1.)),40.); \n\
957 TopoDS_Edge E2b = BRepBuilderAPI_MakeEdge(c2b);\n\
958 TopoDS_Wire W2b = BRepBuilderAPI_MakeWire(E2b); \n\
959 gp_Circ c3b = gp_Circ(gp_Ax2(gp_Pnt(275.,0.,100.),gp_Dir(0.,0.,1.)),40.);\n\
960 TopoDS_Edge E3b = BRepBuilderAPI_MakeEdge(c3b);\n\
961 TopoDS_Wire W3b = BRepBuilderAPI_MakeWire(E3b);\n\
962 gp_Circ c4b= gp_Circ(gp_Ax2(gp_Pnt(200.,0.,200.),gp_Dir(0.,0.,1.)),40.);\n\
963 TopoDS_Edge E4b = BRepBuilderAPI_MakeEdge(c4b);\n\
964 TopoDS_Wire W4b = BRepBuilderAPI_MakeWire(E4b);\n\
965 BRepOffsetAPI_ThruSections generatorb(Standard_True,Standard_False);\n\
966 generatorb.AddWire(W1b);\n\
967 generatorb.AddWire(W2b);\n\
968 generatorb.AddWire(W3b);\n\
969 generatorb.AddWire(W4b);\n\
970 generatorb.Build();\n\
971 TopoDS_Shape S2 = generatorb.Shape();\n\
973 PocessTextInDialog("Make a Thru sections", Message);
977 void CModelingDoc::OnEvolved()
979 AIS_ListOfInteractive aList;
980 myAISContext->DisplayedObjects(aList);
981 AIS_ListIteratorOfListOfInteractive aListIterator;
982 for(aListIterator.Initialize(aList);aListIterator.More();aListIterator.Next()){
983 myAISContext->Remove (aListIterator.Value(), Standard_False);
986 BRepBuilderAPI_MakePolygon P;
987 P.Add(gp_Pnt(0.,0.,0.));
988 P.Add(gp_Pnt(200.,0.,0.));
989 P.Add(gp_Pnt(200.,200.,0.));
990 P.Add(gp_Pnt(0.,200.,0.));
991 P.Add(gp_Pnt(0.,0.,0.));
992 TopoDS_Wire W = P.Wire();
994 Handle(AIS_Shape) ais1 = new AIS_Shape(W);
995 myAISContext->Display(ais1,Standard_False);
997 TopoDS_Wire wprof = BRepBuilderAPI_MakePolygon(gp_Pnt(0.,0.,0.),gp_Pnt(-60.,-60.,-200.));
999 Handle(AIS_Shape) ais3 = new AIS_Shape(wprof);
1000 myAISContext->Display(ais3,Standard_False);
1003 TopoDS_Shape S = BRepOffsetAPI_MakeEvolved(W,wprof,GeomAbs_Arc,Standard_True,Standard_False,Standard_True,0.0001);
1005 Handle(AIS_Shape) ais2 = new AIS_Shape(S);
1006 myAISContext->SetColor(ais2,Quantity_NOC_MATRABLUE,Standard_False);
1007 myAISContext->SetMaterial(ais2,Graphic3d_NOM_PLASTIC,Standard_False);
1008 myAISContext->Display(ais2,Standard_False);
1011 TCollection_AsciiString Message ("\
1013 ---------- Evolved shape -------------- \n\
1015 BRepBuilderAPI_MakePolygon P;\n\
1016 P.Add(gp_Pnt(0.,0.,0.));\n\
1017 P.Add(gp_Pnt(200.,0.,0.));\n\
1018 P.Add(gp_Pnt(200.,200.,0.));\n\
1019 P.Add(gp_Pnt(0.,200.,0.));\n\
1020 P.Add(gp_Pnt(0.,0.,0.));\n\
1021 TopoDS_Wire W = P.Wire();\n\
1022 TopoDS_Wire wprof = BRepBuilderAPI_MakePolygon(gp_Pnt(0.,0.,0.),gp_Pnt(-60.,-60.,-200.));\n\
1023 TopoDS_Shape S = BRepBuilderAPI_MakeEvolved(W,wprof,GeomAbs_Arc,Standard_True,Standard_False,Standard_True,0.0001);\n\
1025 PocessTextInDialog("Make an evolved shape", Message);
1029 void CModelingDoc::OnDraft()
1031 AIS_ListOfInteractive aList;
1032 myAISContext->DisplayedObjects(aList);
1033 AIS_ListIteratorOfListOfInteractive aListIterator;
1034 for(aListIterator.Initialize(aList);aListIterator.More();aListIterator.Next()){
1035 myAISContext->Remove (aListIterator.Value(), Standard_False);
1038 TopoDS_Shape S = BRepPrimAPI_MakeBox(200., 300., 150.).Shape();
1039 Handle(AIS_Shape) ais1 = new AIS_Shape(S);
1040 myAISContext->SetColor(ais1,Quantity_NOC_GREEN,Standard_False);
1041 myAISContext->SetMaterial(ais1,Graphic3d_NOM_PLASTIC,Standard_False);
1042 myAISContext->Display(ais1,Standard_False);
1045 BRepOffsetAPI_DraftAngle adraft(S);
1047 for (Ex.Init(S,TopAbs_FACE); Ex.More(); Ex.Next()) {
1048 TopoDS_Face F = TopoDS::Face(Ex.Current());
1049 Handle(Geom_Plane) surf = Handle(Geom_Plane)::DownCast(BRep_Tool::Surface(F));
1050 gp_Pln apln = surf->Pln();
1051 gp_Dir dirF = apln.Axis().Direction();
1052 if (dirF.IsNormal(gp_Dir(0.,0.,1.),Precision::Angular()))
1053 adraft.Add(F, gp_Dir(0.,0.,1.), 15.*M_PI/180, gp_Pln(gp::XOY()));
1055 ais1->Set(adraft.Shape());
1056 myAISContext->Redisplay(ais1,Standard_False);
1059 TCollection_AsciiString Message ("\
1061 ---------- Tapered shape -------------- \n\
1063 TopoDS_Shape S = BRepPrimAPI_MakeBox(200.,300.,150.);\n\
1064 BRepOffsetAPI_DraftAngle adraft(S);\n\
1065 TopExp_Explorer Ex;\n\
1066 for (Ex.Init(S,TopAbs_FACE); Ex.More(); Ex.Next()) {\n\
1067 TopoDS_Face F = TopoDS::Face(Ex.Current());\n\
1068 Handle(Geom_Plane) surf = Handle(Geom_Plane)::DownCast(BRep_Tool::Surface(F));\n\
1069 gp_Pln apln = surf->Pln();\n\
1070 gp_Dir dirF = apln.Axis().Direction();\n\
1071 if (dirF.IsNormal(gp_Dir(0.,0.,1.),Precision::Angular()))\n\
1072 adraft.Add(F, gp_Dir(0.,0.,1.), 15.*PI180, gp_Pln(gp::XOY()));\n\
1075 PocessTextInDialog("Make a tapered shape", Message);
1079 /* =================================================================================
1080 ==================== O P E R A T I O N S ====================================
1081 ================================================================================= */
1083 void CModelingDoc::OnCut()
1085 AIS_ListOfInteractive aList;
1086 myAISContext->DisplayedObjects(aList);
1087 AIS_ListIteratorOfListOfInteractive aListIterator;
1088 for(aListIterator.Initialize(aList);aListIterator.More();aListIterator.Next()){
1089 myAISContext->Remove (aListIterator.Value(), Standard_False);
1092 TopoDS_Shape theBox = BRepPrimAPI_MakeBox(200, 60, 60).Shape();
1094 Handle (AIS_Shape) ais1 = new AIS_Shape(theBox);
1095 myAISContext->SetDisplayMode(ais1,1,Standard_False);
1096 myAISContext->SetColor(ais1,Quantity_NOC_GREEN,Standard_False);
1097 myAISContext->SetMaterial(ais1,Graphic3d_NOM_PLASTIC,Standard_False);
1098 myAISContext->Display(ais1,Standard_False);
1099 const Handle(AIS_InteractiveObject)& anIO1 = ais1;
1100 myAISContext->SetSelected (anIO1, Standard_False);
1105 TopoDS_Shape theSphere = BRepPrimAPI_MakeSphere(gp_Pnt(100, 20, 20), 80).Shape();
1106 Handle (AIS_Shape) ais2 = new AIS_Shape(theSphere);
1107 myAISContext->SetDisplayMode(ais2,1,Standard_False);
1108 myAISContext->SetColor(ais2,Quantity_NOC_YELLOW,Standard_False);
1109 myAISContext->SetMaterial(ais2,Graphic3d_NOM_PLASTIC,Standard_False);
1110 myAISContext->Display(ais2,Standard_False);
1111 const Handle(AIS_InteractiveObject)& anIO2 = ais2;
1112 myAISContext->SetSelected (anIO2, Standard_False);
1116 TopoDS_Shape ShapeCut = BRepAlgoAPI_Cut(theSphere,theBox);
1118 myAISContext->Erase(ais1,Standard_False);
1119 myAISContext->Erase(ais2,Standard_False);
1121 Handle (AIS_Shape) aSection = new AIS_Shape(ShapeCut);
1122 myAISContext->SetDisplayMode(aSection,1,Standard_False);
1123 myAISContext->SetColor(aSection,Quantity_NOC_RED,Standard_False);
1124 myAISContext->SetMaterial(aSection,Graphic3d_NOM_PLASTIC,Standard_False);
1125 myAISContext->Display(aSection,Standard_False);
1126 const Handle(AIS_InteractiveObject)& anIOSection = aSection;
1127 myAISContext->SetSelected (anIOSection, Standard_False);
1130 TCollection_AsciiString Message ("\
1132 TopoDS_Shape theBox = BRepPrimAPI_MakeBox(200,40,40); \n\
1134 TopoDS_Shape theSphere = BRepPrimAPI_MakeSphere(gp_Pnt(100,20,20),80); \n\
1136 TopoDS_Shape ShapeCut = BRepAlgoAPI_Cut(theSphere,theBox); \n\
1138 PocessTextInDialog("Cut the sphere with a box", Message);
1152 void CModelingDoc::OnFuse()
1154 AIS_ListOfInteractive aList;
1155 myAISContext->DisplayedObjects(aList);
1156 AIS_ListIteratorOfListOfInteractive aListIterator;
1157 for(aListIterator.Initialize(aList);aListIterator.More();aListIterator.Next()){
1158 myAISContext->Remove (aListIterator.Value(), Standard_False);
1162 TopoDS_Shape theBox1 = BRepPrimAPI_MakeBox(60, 200, 70).Shape();
1163 Handle (AIS_Shape) ais1 = new AIS_Shape(theBox1);
1164 myAISContext->SetColor(ais1,Quantity_NOC_GREEN,Standard_False);
1165 myAISContext->SetMaterial(ais1,Graphic3d_NOM_PLASTIC,Standard_False);
1166 myAISContext->Display(ais1,Standard_False);
1167 const Handle(AIS_InteractiveObject)& anIO1 = ais1;
1168 myAISContext->SetSelected (anIO1, Standard_False);
1172 TopoDS_Shape theBox2 = BRepPrimAPI_MakeBox(P, 20, 150, 110).Shape();
1173 Handle (AIS_Shape) ais2 = new AIS_Shape(theBox2);
1174 myAISContext->SetColor(ais2,Quantity_NOC_YELLOW,Standard_False);
1175 myAISContext->SetMaterial(ais2,Graphic3d_NOM_PLASTIC,Standard_False);
1176 myAISContext->Display(ais2,Standard_False);
1177 const Handle(AIS_InteractiveObject)& anIO2 = ais2;
1178 myAISContext->SetSelected (anIO2, Standard_False);
1182 TopoDS_Shape FusedShape = BRepAlgoAPI_Fuse(theBox1,theBox2);
1184 myAISContext->Erase(ais1,false);
1185 myAISContext->Erase(ais2,false);
1187 Handle (AIS_Shape) aFusion = new AIS_Shape(FusedShape);
1188 myAISContext->SetDisplayMode(aFusion,1,Standard_False);
1189 myAISContext->SetColor(aFusion,Quantity_NOC_RED,Standard_False);
1190 myAISContext->SetMaterial(aFusion,Graphic3d_NOM_PLASTIC,Standard_False);
1191 myAISContext->Display(aFusion,Standard_False);
1192 const Handle(AIS_InteractiveObject)& anIOFusion = aFusion;
1193 myAISContext->SetSelected (anIOFusion, Standard_False);
1194 myAISContext->UpdateCurrentViewer();
1196 TCollection_AsciiString Message ("\
1198 TopoDS_Shape theBox1 = BRepPrimAPI_MakeBox(50,200,70); \n\
1200 TopoDS_Shape theBox2 = BRepPrimAPI_MakeBox(-30,150,70); \n\
1202 TopoDS_Shape FusedShape = BRepAlgoAPI_Fuse(theBox1,theBox2); \n");
1203 PocessTextInDialog("Fuse the boxes", Message);
1207 void CModelingDoc::OnCommon()
1209 AIS_ListOfInteractive aList;
1210 myAISContext->DisplayedObjects(aList);
1211 AIS_ListIteratorOfListOfInteractive aListIterator;
1212 for(aListIterator.Initialize(aList);aListIterator.More();aListIterator.Next()){
1213 myAISContext->Remove (aListIterator.Value(), Standard_False);
1216 gp_Ax2 axe(gp_Pnt(10,10,10),gp_Dir(1,2,1));
1217 TopoDS_Shape theBox = BRepPrimAPI_MakeBox(axe, 60, 80, 100).Shape();
1219 Handle(AIS_Shape) aboxshape=new AIS_Shape(theBox);
1220 myAISContext->SetColor(aboxshape,Quantity_NOC_YELLOW,Standard_False);
1221 myAISContext->SetMaterial(aboxshape,Graphic3d_NOM_PLASTIC,Standard_False);
1222 myAISContext->SetTransparency(aboxshape,0.2,Standard_False);
1223 myAISContext->Display(aboxshape, AIS_Shaded, 0, Standard_False);
1224 const Handle(AIS_InteractiveObject)& anIOBoxShape = aboxshape;
1225 myAISContext->SetSelected (anIOBoxShape, Standard_False);
1229 TopoDS_Shape theWedge = BRepPrimAPI_MakeWedge(60., 100., 80., 20.).Shape();
1231 Handle(AIS_Shape) awedge = new AIS_Shape(theWedge);
1232 myAISContext->SetColor(awedge,Quantity_NOC_RED,Standard_False);
1233 myAISContext->SetMaterial(awedge,Graphic3d_NOM_PLASTIC,Standard_False);
1234 myAISContext->SetTransparency(awedge,0.0,Standard_False);
1235 myAISContext->Display(awedge,Standard_False);
1236 const Handle(AIS_InteractiveObject)& anIOWedge = awedge;
1237 myAISContext->SetSelected (anIOWedge, Standard_False);
1238 myAISContext->UpdateCurrentViewer();
1241 TopoDS_Shape theCommonSurface = BRepAlgoAPI_Common(theBox,theWedge);
1243 myAISContext->Erase(aboxshape, false);
1244 myAISContext->Erase(awedge, false);
1246 Handle(AIS_Shape) acommon = new AIS_Shape(theCommonSurface);
1247 myAISContext->SetColor(acommon,Quantity_NOC_GREEN,Standard_False);
1248 myAISContext->SetMaterial(acommon,Graphic3d_NOM_PLASTIC,Standard_False);
1249 myAISContext->Display (acommon, AIS_Shaded, 0,Standard_False);
1250 const Handle(AIS_InteractiveObject)& anIOCommon = acommon;
1251 myAISContext->SetSelected (anIOCommon, Standard_False);
1252 myAISContext->UpdateCurrentViewer();
1254 TCollection_AsciiString Message ("\
1256 gp_Ax2 axe(gp_Pnt(10,10,10),gp_Dir(1,2,1)); \n\
1258 TopoDS_Shape theBox = BRepPrimAPI_MakeBox(axe,60,80,100); \n\
1260 TopoDS_Shape theWedge = BRepPrimAPI_MakeWedge(60.,100.,80.,20.); \n\
1262 TopoDS_Shape theCommonSurface = BRepAlgoAPI_Common(theBox,theWedge); \n\
1265 PocessTextInDialog("Compute the common surface ", Message);
1269 void CModelingDoc::OnSection()
1272 AIS_ListOfInteractive aList;
1273 myAISContext->DisplayedObjects(aList);
1274 AIS_ListIteratorOfListOfInteractive aListIterator;
1275 for(aListIterator.Initialize(aList);aListIterator.More();aListIterator.Next()){
1276 myAISContext->Remove (aListIterator.Value(), Standard_False);
1279 TopoDS_Shape atorus = BRepPrimAPI_MakeTorus(120, 20).Shape();
1281 Handle(AIS_Shape) ashape=new AIS_Shape(atorus);
1282 myAISContext->SetColor(ashape,Quantity_NOC_RED,Standard_False);
1283 myAISContext->SetMaterial(ashape,Graphic3d_NOM_PLASTIC,Standard_False);
1284 myAISContext->SetDisplayMode(ashape,1,Standard_False);
1285 myAISContext->SetTransparency(ashape,0.1,Standard_False);
1286 myAISContext->Display(ashape,Standard_False);
1289 Standard_Real radius = 120;
1290 Standard_Integer i=-3;
1293 TopoDS_Shape asphere = BRepPrimAPI_MakeSphere(gp_Pnt(26 * 3 * i, 0, 0), radius).Shape();
1295 Handle (AIS_Shape) theShape=new AIS_Shape (asphere);
1296 myAISContext->SetTransparency(theShape,0.1,Standard_False);
1297 myAISContext->SetColor(theShape,Quantity_NOC_WHITE,Standard_False);
1298 myAISContext->SetDisplayMode(theShape,1,Standard_False);
1299 myAISContext->Display(theShape,Standard_False);
1302 Standard_Boolean PerformNow=Standard_False;
1304 BRepAlgoAPI_Section section(atorus,asphere,PerformNow);
1305 section.ComputePCurveOn1(Standard_True);
1306 section.Approximation(TopOpeBRepTool_APPROX);
1309 Handle(AIS_Shape) asection=new AIS_Shape(section.Shape());
1310 myAISContext->SetDisplayMode (asection, 0, Standard_False);
1311 myAISContext->SetColor (asection, Quantity_NOC_WHITE, Standard_False);
1312 myAISContext->Display (asection, Standard_False);
1314 myAISContext->Remove (theShape, Standard_False);
1317 myAISContext->UpdateCurrentViewer();
1318 TCollection_AsciiString Message ("\
1320 TopoDS_Shape atorus = BRepPrimAPI_MakeTorus(120,20); \n\
1321 gp_Vec V1(1,1,1); \n\
1322 Standard_Real radius = 120; \n\
1323 Standard_Integer i=-3; \n\
1324 for(i;i<=3;i++) { \n\
1325 TopoDS_Shape asphere = BRepPrimAPI_MakeSphere(gp_Pnt(78*i,0,0),radius); \n\
1326 Standard_Boolean PerformNow=Standard_False; \n\
1327 BRepAlgoAPI_Section section(atorus,asphere,PerformNow); \n\
1328 section.ComputePCurveOn1(Standard_True); \n\
1329 section.Approximation(TopOpeBRepTool_APPROX); \n\
1330 section.Build(); \n\
1333 PocessTextInDialog("Compute the sections ", Message);
1337 void CModelingDoc::OnPsection()
1339 AIS_ListOfInteractive aList;
1340 myAISContext->DisplayedObjects(aList);
1341 AIS_ListIteratorOfListOfInteractive aListIterator;
1342 for(aListIterator.Initialize(aList);aListIterator.More();aListIterator.Next()){
1343 myAISContext->Remove (aListIterator.Value(), Standard_False);
1346 TopoDS_Shape theTorus = BRepPrimAPI_MakeTorus(35, 8).Shape();
1347 Handle(AIS_Shape) atorus = new AIS_Shape(theTorus);
1348 myAISContext->SetColor(atorus,Quantity_NOC_YELLOW,Standard_False);
1349 myAISContext->SetMaterial(atorus,Graphic3d_NOM_PLASTIC,Standard_False);
1350 myAISContext->SetTransparency(atorus,0.1,Standard_False);
1351 myAISContext->Display(atorus,Standard_False);
1352 const Handle(AIS_InteractiveObject)& anIOTorus = atorus;
1353 myAISContext->SetSelected (anIOTorus, Standard_False);
1357 gp_Pln aplane(1,0.25,3,4);
1358 Handle (Geom_Plane) thePlane = new Geom_Plane(aplane);
1359 Handle (AIS_Plane) ais1 = new AIS_Plane(thePlane);
1360 myAISContext->Display(ais1,Standard_False);
1361 const Handle(AIS_InteractiveObject)& anIO1 = ais1;
1362 myAISContext->SetSelected (anIO1, Standard_False);
1366 BRepAlgoAPI_Section section(theTorus,thePlane,Standard_False);
1367 section.ComputePCurveOn1(Standard_True);
1368 section.Approximation(TopOpeBRepTool_APPROX);
1371 Handle(AIS_Shape) asection=new AIS_Shape(section.Shape());
1372 myAISContext->SetDisplayMode(asection ,0,Standard_False);
1373 myAISContext->SetColor(asection,Quantity_NOC_WHITE,Standard_False);
1374 myAISContext->Display(asection,Standard_False);
1377 TCollection_AsciiString Message ("\
1379 TopoDS_Shape theTorus = BRepPrimAPI_MakeTorus(60.,20.); \n\
1381 gp_Pln P(1,2,1,-15); \n\
1383 TopoDS_Shape Psection = BRepAlgoAPI_Section(theTorus,P); \n\
1386 PocessTextInDialog("Compute the plane section ", Message);
1390 void CModelingDoc::OnBlend()
1392 AIS_ListOfInteractive aList;
1393 myAISContext->DisplayedObjects(aList);
1394 AIS_ListIteratorOfListOfInteractive aListIterator;
1395 for(aListIterator.Initialize(aList);aListIterator.More();aListIterator.Next()){
1396 myAISContext->Remove (aListIterator.Value(), Standard_False);
1399 TopoDS_Shape Box = BRepPrimAPI_MakeBox(gp_Pnt(-400,0,0),200,230,180).Shape();
1400 Handle(AIS_Shape) ais1 = new AIS_Shape(Box);
1401 myAISContext->SetColor(ais1,Quantity_NOC_YELLOW,Standard_False);
1402 myAISContext->SetMaterial(ais1,Graphic3d_NOM_PLASTIC,Standard_False);
1403 myAISContext->Display(ais1,Standard_False);
1404 const Handle(AIS_InteractiveObject)& anIO1 = ais1;
1405 myAISContext->SetSelected (anIO1, Standard_False);
1409 BRepFilletAPI_MakeFillet fillet(Box);
1411 for (TopExp_Explorer ex(Box,TopAbs_EDGE); ex.More(); ex.Next()) {
1412 TopoDS_Edge Edge =TopoDS::Edge(ex.Current());
1413 fillet.Add(20,Edge);
1416 myAISContext->Remove(ais1,Standard_False);
1418 TopoDS_Shape blendedBox = fillet.Shape();
1419 Handle(AIS_Shape) aBlendbox = new AIS_Shape(blendedBox);
1420 myAISContext->SetColor(aBlendbox,Quantity_NOC_YELLOW,Standard_False);
1421 myAISContext->SetMaterial(aBlendbox,Graphic3d_NOM_PLASTIC,Standard_False);
1422 myAISContext->Display(aBlendbox,Standard_False);
1423 const Handle(AIS_InteractiveObject)& anIOBlendBox = aBlendbox;
1424 myAISContext->SetSelected (anIOBlendBox, Standard_False);
1429 gp_Pnt P1(250,150,75);
1430 TopoDS_Shape S1 = BRepPrimAPI_MakeBox(300, 200, 200).Shape();
1431 TopoDS_Shape S2 = BRepPrimAPI_MakeBox(P1, 120, 180, 70).Shape();
1433 TopoDS_Shape fusedShape = BRepAlgoAPI_Fuse(S1,S2);
1434 Handle(AIS_Shape) ais2 = new AIS_Shape(fusedShape);
1435 myAISContext->SetColor(ais2,Quantity_NOC_RED,Standard_False);
1436 myAISContext->SetMaterial(ais2,Graphic3d_NOM_PLASTIC,Standard_False);
1437 myAISContext->Display(ais2,Standard_False);
1438 const Handle(AIS_InteractiveObject)& anIO2 = ais2;
1439 myAISContext->SetSelected (anIO2, Standard_False);
1442 BRepFilletAPI_MakeFillet fill(fusedShape);
1444 for (TopExp_Explorer ex1(fusedShape,TopAbs_EDGE); ex1.More(); ex1.Next()) {
1445 TopoDS_Edge E =TopoDS::Edge(ex1.Current());
1449 for (Standard_Integer i = 1;i<=fill.NbContours();i++) {
1450 Standard_Real longueur(fill.Length(i));
1451 Standard_Real Rad(0.15*longueur);
1452 fill.SetRadius(Rad,i, 1);
1455 TopoDS_Shape blendedFusedSolids = fill.Shape();
1457 Handle(AIS_Shape) aBlend = new AIS_Shape(blendedFusedSolids);
1458 myAISContext->SetColor(aBlend,Quantity_NOC_RED,Standard_False);
1459 myAISContext->SetMaterial(aBlend,Graphic3d_NOM_PLASTIC,Standard_False);
1460 myAISContext->Display(aBlend,Standard_False);
1462 myAISContext->Remove(ais2,Standard_False);
1466 TCollection_AsciiString Message ("\
1469 TopoDS_Shape Box = BRepPrimAPI_MakeBox(gp_Pnt(-400,0,0),200,230,180);\n\
1471 BRepPrimAPI_MakeFillet fillet(Box);\n\
1473 for (TopExp_Explorer ex(Box,TopAbs_EDGE); ex.More(); ex.Next()) {\n\
1474 TopoDS_Edge Edge =TopoDS::Edge(ex.Current());\n\
1475 fillet.Add(20,Edge);\n\
1477 TopoDS_Shape blendedBox = fillet.Shape();\n\
1479 ////////////////////////////////////////////////////////////////////////\n\
1483 //Warning : On the acute angles of the boxes a fillet is created. \n\
1484 On the angles of fusion a blend is created. \n\
1486 gp_Pnt P1(150,150,75);\n\
1487 TopoDS_Shape S1 = BRepPrimAPI_MakeBox(300,200,200);\n\
1488 TopoDS_Shape S2 = BRepPrimAPI_MakeBox(P1,100,200,70);\n\
1490 TopoDS_Shape fusedShape = BRepAlgoAPI_Fuse(S1,S2);\n\
1491 BRepPrimAPI_MakeFillet fill(fusedShape);\n\
1493 for (TopExp_Explorer ex1(fusedShape,TopAbs_EDGE); ex1.More(); ex1.Next()) {\n\
1494 TopoDS_Edge E =TopoDS::Edge(ex1.Current());\n\
1498 for (Standard_Integer i = 1;i<=fill.NbContours();i++) {\n\
1499 Standard_Real longueur(fill.Length(i));\n\
1500 Standard_Real Rad(0.2*longueur);\n\
1501 fill.SetRadius(Rad,i);\n\
1504 TopoDS_Shape blendedFusedSolids = fill.Shape(); \n");
1506 PocessTextInDialog("Compute the blend on the edges ", Message);
1509 void CModelingDoc::OnEvolvedblend()
1512 AIS_ListOfInteractive aList;
1513 myAISContext->DisplayedObjects(aList);
1514 AIS_ListIteratorOfListOfInteractive aListIterator;
1515 for(aListIterator.Initialize(aList);aListIterator.More();aListIterator.Next()){
1516 myAISContext->Remove (aListIterator.Value(), Standard_False);
1519 TopoDS_Shape theBox = BRepPrimAPI_MakeBox(200, 200, 200).Shape();
1520 Handle(AIS_Shape) ais1 = new AIS_Shape(theBox);
1521 myAISContext->SetColor(ais1,Quantity_NOC_BROWN,Standard_False);
1522 myAISContext->SetMaterial(ais1,Graphic3d_NOM_PLASTIC,Standard_False);
1523 myAISContext->Display(ais1,Standard_False);
1524 const Handle(AIS_InteractiveObject)& anIO1 = ais1;
1525 myAISContext->SetSelected (anIO1, Standard_False);
1529 BRepFilletAPI_MakeFillet Rake(theBox);
1531 TopExp_Explorer ex(theBox,TopAbs_EDGE);
1536 Rake.Add(8,50,TopoDS::Edge(ex.Current()));
1538 if (Rake.IsDone() ){
1539 TopoDS_Shape evolvedBox = Rake.Shape();
1540 ais1->Set(evolvedBox);
1541 myAISContext->Redisplay(ais1,Standard_False);
1542 myAISContext->SetSelected(anIO1, Standard_False);
1548 TopoDS_Shape theCylinder = BRepPrimAPI_MakeCylinder(gp_Ax2(gp_Pnt(-300, 0, 0), gp::DZ()), 100, 200).Shape();
1549 Handle(AIS_Shape) ais3 = new AIS_Shape(theCylinder);
1550 myAISContext->SetColor(ais3,Quantity_NOC_GREEN,Standard_False);
1551 myAISContext->SetMaterial(ais3,Graphic3d_NOM_PLASTIC,Standard_False);
1552 myAISContext->Display(ais3,Standard_False);
1553 const Handle(AIS_InteractiveObject)& anIO3 = ais3;
1554 myAISContext->SetSelected (anIO3, Standard_False);
1558 BRepFilletAPI_MakeFillet fillet(theCylinder);
1560 TColgp_Array1OfPnt2d TabPoint2(1,20);
1562 for (Standard_Integer i=0; i<=19; i++) {
1563 gp_Pnt2d Point2d(i*2*M_PI/19,60*cos(i*M_PI/19-M_PI/2)+10);
1564 TabPoint2.SetValue(i+1,Point2d);
1567 TopExp_Explorer exp2(theCylinder,TopAbs_EDGE);
1568 fillet.Add(TabPoint2,TopoDS::Edge(exp2.Current()));
1570 if (fillet.IsDone() ){
1571 TopoDS_Shape LawEvolvedCylinder = fillet.Shape();
1572 ais3->Set(LawEvolvedCylinder);
1573 myAISContext->Redisplay(ais3,Standard_False);
1574 myAISContext->SetSelected(anIO3,Standard_False);
1580 TopoDS_Shape theBox2 = BRepPrimAPI_MakeBox(P, 200, 200, 200).Shape();
1581 Handle(AIS_Shape) ais2 = new AIS_Shape(theBox2);
1582 myAISContext->SetColor(ais2,Quantity_NOC_RED,Standard_False);
1583 myAISContext->SetMaterial(ais2,Graphic3d_NOM_PLASTIC,Standard_False);
1584 myAISContext->Display(ais2,Standard_False);
1585 const Handle(AIS_InteractiveObject)& anIO2 = ais2;
1586 myAISContext->SetSelected (anIO2, Standard_False);
1591 BRepFilletAPI_MakeFillet afillet(theBox2);
1593 TColgp_Array1OfPnt2d TabPoint(1,6);
1596 gp_Pnt2d P2(0.2,16.);
1597 gp_Pnt2d P3(0.4,25.);
1598 gp_Pnt2d P4(0.6,55.);
1599 gp_Pnt2d P5(0.8,28.);
1600 gp_Pnt2d P6(1.,20.);
1601 TabPoint.SetValue(1,P1);
1602 TabPoint.SetValue(2,P2);
1603 TabPoint.SetValue(3,P3);
1604 TabPoint.SetValue(4,P4);
1605 TabPoint.SetValue(5,P5);
1606 TabPoint.SetValue(6,P6);
1608 TopExp_Explorer exp(theBox2,TopAbs_EDGE);
1614 afillet.Add(TabPoint, TopoDS::Edge(exp.Current()));
1617 if (afillet.IsDone() ){
1618 TopoDS_Shape LawevolvedBox = afillet.Shape();
1619 ais2->Set(LawevolvedBox);
1620 myAISContext->Redisplay(ais2,Standard_False);
1621 myAISContext->SetSelected(anIO2,Standard_False);
1626 TCollection_AsciiString Message ("\
1630 TopoDS_Shape theBox = BRepPrimAPI_MakeBox(200,200,200); \n\
1632 BRepPrimAPI_MakeFillet Rake(theBox); \n\
1633 ChFi3d_FilletShape FSh = ChFi3d_Rational; \n\
1634 Rake.SetFilletShape(FSh); \n\
1636 TopExp_Explorer ex(theBox,TopAbs_EDGE); \n\
1637 ex.Next(); //in order to recover the front edge \n\
1641 Rake.Add(8,50,TopoDS::Edge(ex.Current())); \n\
1644 if (Rake.IsDone() ) \n\
1645 TopoDS_Shape theBrownBox = Rake.Shape(); \n\
1647 ////////////////////////////////////////////////////////// \n\
1649 //THE GREEN CYLINDER \n\
1651 TopoDS_Shape theCylinder = BRepPrimAPI_MakeCylinder(gp_Ax2(gp_Pnt(-300,0,0),gp_Dir(0,0,1)),100,200); \n\
1653 BRepPrimAPI_MakeFillet fillet(theCylinder); \n\
1655 TColgp_Array1OfPnt2d TabPoint2(1,20); \n\
1657 for (Standard_Integer i=0; i<=19; i++) { \n\
1658 gp_Pnt2d Point2d(i*2*PI/19,60*cos(i*PI/19-PI/2)+10); \n\
1659 TabPoint2.SetValue(i+1,Point2d); \n\
1662 TopExp_Explorer exp2(theCylinder,TopAbs_EDGE); \n\
1663 fillet.Add(TabPoint2,TopoDS::Edge(exp2.Current())); \n\
1666 if (fillet.IsDone() ) \n\
1667 TopoDS_Shape LawEvolvedCylinder = fillet.Shape(); \n\
1669 //////////////////////////////////////////////////////////// \n\
1673 gp_Pnt P(350,0,0); \n\
1674 TopoDS_Shape theBox2 = BRepPrimAPI_MakeBox(P,200,200,200); \n\
1676 BRepPrimAPI_MakeFillet fill(theBox2); \n\
1678 TColgp_Array1OfPnt2d TabPoint(1,6); \n\
1679 gp_Pnt2d P1(0,8); \n\
1680 gp_Pnt2d P2(0.2,16); \n\
1681 gp_Pnt2d P3(0.4,25); \n\
1682 gp_Pnt2d P4(0.6,55); \n\
1683 gp_Pnt2d P5(0.8,28); \n\
1684 gp_Pnt2d P6(1,20); \n\
1685 TabPoint.SetValue(1,P1); \n\
1686 TabPoint.SetValue(2,P2); \n\
1687 TabPoint.SetValue(3,P3); \n\
1688 TabPoint.SetValue(4,P4); \n\
1689 TabPoint.SetValue(5,P5); \n\
1690 TabPoint.SetValue(6,P6); \n\
1692 TopExp_Explorer exp(theBox2,TopAbs_EDGE); \n\
1693 exp.Next(); //in order to trcover the front edge \n\
1697 fill.Add(TabPoint,TopoDS::Edge(exp.Current())); \n\
1700 if (fillet.IsDone() ) \n\
1701 TopoDS_Shape theRedBox = fill.Shape(); \n\
1704 PocessTextInDialog("Compute evolutiv blend on an edge ", Message);
1708 void CModelingDoc::OnChamf()
1710 AIS_ListOfInteractive aList;
1711 myAISContext->DisplayedObjects(aList);
1712 AIS_ListIteratorOfListOfInteractive aListIterator;
1713 for(aListIterator.Initialize(aList);aListIterator.More();aListIterator.Next()){
1714 myAISContext->Remove (aListIterator.Value(), Standard_False);
1717 TopoDS_Shape theBox = BRepPrimAPI_MakeBox(60,200,70).Shape();
1718 Handle(AIS_Shape) ais1 = new AIS_Shape(theBox);
1719 myAISContext->SetColor(ais1,Quantity_NOC_YELLOW,Standard_False);
1720 myAISContext->SetMaterial(ais1,Graphic3d_NOM_PLASTIC,Standard_False);
1721 myAISContext->Display(ais1,Standard_False);
1722 const Handle(AIS_InteractiveObject)& anIO1 = ais1;
1723 myAISContext->SetSelected (anIO1, Standard_False);
1727 BRepFilletAPI_MakeChamfer MC(theBox);
1728 // add all the edges to chamfer
1729 TopTools_IndexedDataMapOfShapeListOfShape M;
1730 TopExp::MapShapesAndAncestors(theBox,TopAbs_EDGE,TopAbs_FACE,M);
1731 for (Standard_Integer i = 1;i<=M.Extent();i++) {
1732 TopoDS_Edge E = TopoDS::Edge(M.FindKey(i));
1733 TopoDS_Face F = TopoDS::Face(M.FindFromIndex(i).First());
1737 TopoDS_Shape ChanfrenedBox = MC.Shape();
1738 Handle(AIS_Shape) aBlendedBox = new AIS_Shape(ChanfrenedBox);
1739 myAISContext->SetColor(aBlendedBox,Quantity_NOC_YELLOW,Standard_False);
1740 myAISContext->SetMaterial(aBlendedBox,Graphic3d_NOM_PLASTIC,Standard_False);
1741 myAISContext->Display(aBlendedBox,Standard_False);
1742 const Handle(AIS_InteractiveObject)& anIOBlendedBox = aBlendedBox;
1743 myAISContext->SetSelected (anIOBlendedBox, Standard_False);
1747 myAISContext->Erase(ais1,Standard_True);
1749 TCollection_AsciiString Message ("\
1751 TopoDS_Shape theBox = BRepPrimAPI_MakeBox(130,200,170); \n\
1752 BRepFilletAPI_MakeChamfer MC(theBox); \n\
1753 TopTools_IndexedDataMapOfShapeListOfShape M; \n\
1754 TopExp::MapShapesAndAncestors(theBox,TopAbs_EDGE,TopAbs_FACE,M); \n\
1755 for (Standar1d_Integer i;i<M.Extent();i++) { \n\
1756 TopoDS_Edge E = TopoDS::Edge(M.FindKey(i)); \n\
1757 TopoDS_Face F = TopoDS::Face(M.FindFromIndex(i).First()); \n\
1758 MC.Add(15,15,E,F); \n\
1760 TopoDS_Shape ChanfrenedBox = MC.Shape(); \n");
1762 PocessTextInDialog("Compute the chamfers on all the edges ", Message);
1765 /* =================================================================================
1766 ==================== L O C A L O P E R A T I O N S ========================
1767 ================================================================================= */
1769 void CModelingDoc::OnPrismLocal()
1771 AIS_ListOfInteractive aList;
1772 myAISContext->DisplayedObjects(aList);
1773 AIS_ListIteratorOfListOfInteractive aListIterator;
1774 for(aListIterator.Initialize(aList);aListIterator.More();aListIterator.Next()){
1775 myAISContext->Remove (aListIterator.Value(), Standard_False);
1777 TopoDS_Shape S = BRepPrimAPI_MakeBox(400., 250., 300.).Shape();
1778 Handle(AIS_Shape) ais1 = new AIS_Shape(S);
1780 myAISContext->SetColor(ais1,Quantity_NOC_GREEN,Standard_False);
1781 myAISContext->SetMaterial(ais1,Graphic3d_NOM_PLASTIC,Standard_False);
1782 myAISContext->Display(ais1,Standard_False);
1783 const Handle(AIS_InteractiveObject)& anIO1 = ais1;
1784 myAISContext->SetSelected (anIO1, Standard_False);
1789 Ex.Init(S,TopAbs_FACE);
1791 TopoDS_Face F = TopoDS::Face(Ex.Current());
1792 Handle(Geom_Surface) surf = BRep_Tool::Surface(F);
1793 Handle(Geom_Plane) Pl = Handle(Geom_Plane)::DownCast(surf);
1794 gp_Dir D = Pl->Pln().Axis().Direction();
1795 // new in 2.0 ..use the trigonometric orientation to make the extrusion.
1798 Handle(Geom2d_Curve) aline;
1799 BRepBuilderAPI_MakeWire MW;
1800 p1 = gp_Pnt2d(200.,-100.);
1801 p2 = gp_Pnt2d(100.,-100.);
1802 aline = GCE2d_MakeLine(p1,p2).Value();
1803 MW.Add(BRepBuilderAPI_MakeEdge(aline,surf,0.,p1.Distance(p2)));
1805 p2 = gp_Pnt2d(100.,-200.);
1806 aline = GCE2d_MakeLine(p1,p2).Value();
1807 MW.Add(BRepBuilderAPI_MakeEdge(aline,surf,0.,p1.Distance(p2)));
1809 p2 = gp_Pnt2d(200.,-200.);
1810 aline = GCE2d_MakeLine(p1,p2).Value();
1811 MW.Add(BRepBuilderAPI_MakeEdge(aline,surf,0.,p1.Distance(p2)));
1813 p2 = gp_Pnt2d(200.,-100.);
1814 aline = GCE2d_MakeLine(p1,p2).Value();
1815 MW.Add(BRepBuilderAPI_MakeEdge(aline,surf,0.,p1.Distance(p2)));
1816 BRepBuilderAPI_MakeFace MKF;
1817 MKF.Init(surf,Standard_False, Precision::Confusion());
1819 TopoDS_Shape FP = MKF.Face();
1820 BRepLib::BuildCurves3d(FP);
1821 BRepFeat_MakePrism MKP(S,FP,F,D,0,Standard_True);
1823 TopoDS_Shape res1 = MKP.Shape();
1826 myAISContext->Redisplay(ais1,Standard_False);
1827 myAISContext->SetSelected(anIO1,Standard_False);
1832 TopoDS_Face F2 = TopoDS::Face(Ex.Current());
1833 surf = BRep_Tool::Surface(F2);
1834 Pl = Handle(Geom_Plane)::DownCast(surf);
1835 D = Pl->Pln().Axis().Direction();
1837 BRepBuilderAPI_MakeWire MW2;
1838 p1 = gp_Pnt2d(100.,100.);
1839 p2 = gp_Pnt2d(200.,100.);
1840 aline = GCE2d_MakeLine(p1,p2).Value();
1841 MW2.Add(BRepBuilderAPI_MakeEdge(aline,surf,0.,p1.Distance(p2)));
1843 p2 = gp_Pnt2d(150.,200.);
1844 aline = GCE2d_MakeLine(p1,p2).Value();
1845 MW2.Add(BRepBuilderAPI_MakeEdge(aline,surf,0.,p1.Distance(p2)));
1847 p2 = gp_Pnt2d(100.,100.);
1848 aline = GCE2d_MakeLine(p1,p2).Value();
1849 MW2.Add(BRepBuilderAPI_MakeEdge(aline,surf,0.,p1.Distance(p2)));
1850 BRepBuilderAPI_MakeFace MKF2;
1851 MKF2.Init(surf,Standard_False, Precision::Confusion());
1852 MKF2.Add(MW2.Wire());
1854 BRepLib::BuildCurves3d(FP);
1855 BRepFeat_MakePrism MKP2(res1,FP,F2,D,1,Standard_True);
1857 TopoDS_Shape res2 = MKP2.Shape();
1860 myAISContext->Redisplay (ais1, Standard_False);
1861 myAISContext->SetSelected (anIO1, Standard_False);
1864 TCollection_AsciiString Message ("\
1866 --- Extrusion ---\n\
1868 TopoDS_Shape S = BRepPrimAPI_MakeBox(400.,250.,300.);\n\
1869 TopExp_Explorer Ex;\n\
1870 Ex.Init(S,TopAbs_FACE);\n\
1872 TopoDS_Face F = TopoDS::Face(Ex.Current());\n\
1873 Handle(Geom_Surface) surf = BRep_Tool::Surface(F);\n\
1874 Handle(Geom_Plane) Pl = Handle(Geom_Plane)::DownCast(surf);\n\
1875 gp_Dir D = Pl->Pln().Axis().Direction();\n\
1878 Handle(Geom2d_Curve) aline;\n\
1879 BRepBuilderAPI_MakeWire MW;\n\
1880 p1 = gp_Pnt2d(200.,-100.);\n\
1881 p2 = gp_Pnt2d(100.,-100.);\n\
1882 aline = GCE2d_MakeLine(p1,p2).Value();\n\
1883 MW.Add(BRepBuilderAPI_MakeEdge(aline,surf,0.,p1.Distance(p2)));\n\
1885 p2 = gp_Pnt2d(100.,-200.);\n\
1886 aline = GCE2d_MakeLine(p1,p2).Value();\n\
1887 MW.Add(BRepBuilderAPI_MakeEdge(aline,surf,0.,p1.Distance(p2)));\n\
1889 p2 = gp_Pnt2d(200.,-200.);\n\
1890 aline = GCE2d_MakeLine(p1,p2).Value();\n\
1891 MW.Add(BRepBuilderAPI_MakeEdge(aline,surf,0.,p1.Distance(p2)));\n\
1893 p2 = gp_Pnt2d(200.,-100.);\n\
1894 aline = GCE2d_MakeLine(p1,p2).Value();\n\
1895 MW.Add(BRepBuilderAPI_MakeEdge(aline,surf,0.,p1.Distance(p2)));\n\
1896 BRepBuilderAPI_MakeFace MKF;\n\
1897 MKF.Init(surf,Standard_False);\n\
1898 MKF.Add(MW.Wire());\n\
1899 TopoDS_Shape FP = MKF.Face();\n\
1900 BRepLib::BuildCurves3d(FP);\n\
1901 BRepFeat_MakePrism MKP(S,FP,F,D,0,Standard_True);\n\
1902 MKP.Perform(200);\n\
1903 TopoDS_Shape res1 = MKP.Shape();\n\
1906 --- Protrusion --- \n\
1909 TopoDS_Face F2 = TopoDS::Face(Ex.Current());\n\
1910 surf = BRep_Tool::Surface(F2);\n\
1911 Pl = Handle(Geom_Plane)::DownCast(surf);\n\
1912 D = Pl->Pln().Axis().Direction();\n\
1914 BRepBuilderAPI_MakeWire MW2;\n\
1915 p1 = gp_Pnt2d(100.,100.);\n\
1916 p2 = gp_Pnt2d(200.,100.);\n\
1917 aline = GCE2d_MakeLine(p1,p2).Value();\n\
1918 MW2.Add(BRepBuilderAPI_MakeEdge(aline,surf,0.,p1.Distance(p2)));\n\
1920 p2 = gp_Pnt2d(150.,200.);\n\
1921 aline = GCE2d_MakeLine(p1,p2).Value();\n\
1922 MW2.Add(BRepBuilderAPI_MakeEdge(aline,surf,0.,p1.Distance(p2)));\n\
1924 p2 = gp_Pnt2d(100.,100.);\n\
1925 aline = GCE2d_MakeLine(p1,p2).Value();\n\
1926 MW2.Add(BRepBuilderAPI_MakeEdge(aline,surf,0.,p1.Distance(p2)));\n\
1927 BRepBuilderAPI_MakeFace MKF2;\n\
1928 MKF2.Init(surf,Standard_False);\n\
1929 MKF2.Add(MW2.Wire());\n\
1930 FP = MKF2.Face();\n\
1931 BRepLib::BuildCurves3d(FP);\n\
1932 BRepFeat_MakePrism MKP2(res1,FP,F2,D,1,Standard_True);\n\
1933 MKP2.Perform(100.);\n\
1934 TopoDS_Shape res2 = MKP2.Shape();\n\
1936 PocessTextInDialog("Make an extrusion or a protrusion", Message);
1940 // BRepFeat_MakeDPrism
1942 void CModelingDoc::OnDprismLocal()
1944 AIS_ListOfInteractive aList;
1945 myAISContext->DisplayedObjects(aList);
1946 AIS_ListIteratorOfListOfInteractive aListIterator;
1947 for(aListIterator.Initialize(aList);aListIterator.More();aListIterator.Next()){
1948 myAISContext->Remove (aListIterator.Value(), Standard_False);
1951 TopoDS_Shape S = BRepPrimAPI_MakeBox(400., 250., 300.).Shape();
1952 Handle(AIS_Shape) ais1 = new AIS_Shape(S);
1954 myAISContext->SetColor(ais1,Quantity_NOC_RED,Standard_False);
1955 myAISContext->SetMaterial(ais1,Graphic3d_NOM_PLASTIC,Standard_False);
1958 Ex.Init(S,TopAbs_FACE);
1964 TopoDS_Face F = TopoDS::Face(Ex.Current());
1965 Handle(Geom_Surface) surf = BRep_Tool::Surface(F);
1966 gp_Circ2d c(gp_Ax2d(gp_Pnt2d(200.,130.),gp_Dir2d(1.,0.)),50.);
1967 BRepBuilderAPI_MakeWire MW;
1968 Handle(Geom2d_Curve) aline = new Geom2d_Circle(c);
1969 MW.Add(BRepBuilderAPI_MakeEdge(aline,surf,0.,M_PI));
1970 MW.Add(BRepBuilderAPI_MakeEdge(aline,surf,M_PI,2.*M_PI));
1971 BRepBuilderAPI_MakeFace MKF;
1972 MKF.Init(surf,Standard_False, Precision::Confusion());
1974 TopoDS_Face FP = MKF.Face();
1975 BRepLib::BuildCurves3d(FP);
1976 BRepFeat_MakeDPrism MKDP(S,FP,F,10*M_PI/180,1,Standard_True);
1978 TopoDS_Shape res1 = MKDP.Shape();
1980 myAISContext->Display(ais1,Standard_False);
1981 const Handle(AIS_InteractiveObject)& anIO1 = ais1;
1982 myAISContext->SetSelected (anIO1, Standard_False);
1988 myAISContext->Redisplay(ais1,Standard_False);
1989 myAISContext->SetSelected(anIO1,Standard_False);
1993 TCollection_AsciiString Message ("\
1995 --- Protrusion with draft angle --- \n\
1997 TopoDS_Shape S = BRepPrimAPI_MakeBox(400.,250.,300.);\n\
1998 TopExp_Explorer Ex;\n\
1999 Ex.Init(S,TopAbs_FACE);\n\
2005 TopoDS_Face F = TopoDS::Face(Ex.Current());\n\
2006 Handle(Geom_Surface) surf = BRep_Tool::Surface(F);\n\
2007 gp_Circ2d c(gp_Ax2d(gp_Pnt2d(200.,130.),gp_Dir2d(1.,0.)),50.);\n\
2008 BRepBuilderAPI_MakeWire MW;\n\
2009 Handle(Geom2d_Curve) aline = new Geom2d_Circle(c);\n\
2010 MW.Add(BRepBuilderAPI_MakeEdge(aline,surf,0.,PI));\n\
2011 MW.Add(BRepBuilderAPI_MakeEdge(aline,surf,PI,2.*PI));\n\
2012 BRepBuilderAPI_MakeFace MKF;\n\
2013 MKF.Init(surf,Standard_False);\n\
2014 MKF.Add(MW.Wire());\n\
2015 TopoDS_Face FP = MKF.Face();\n\
2016 BRepLib::BuildCurves3d(FP);\n\
2017 BRepFeat_MakeDPrism MKDP(S,FP,F,10*PI180,1,Standard_True);\n\
2018 MKDP.Perform(200);\n\
2019 TopoDS_Shape res1 = MKDP.Shape();\n\
2021 PocessTextInDialog("Make an extrusion or a protrusion with a draft angle", Message);
2024 void CModelingDoc::OnRevolLocal()
2026 AIS_ListOfInteractive aList;
2027 myAISContext->DisplayedObjects(aList);
2028 AIS_ListIteratorOfListOfInteractive aListIterator;
2029 for(aListIterator.Initialize(aList);aListIterator.More();aListIterator.Next()){
2030 myAISContext->Remove (aListIterator.Value(), Standard_False);
2032 TopoDS_Shape S = BRepPrimAPI_MakeBox(400., 250., 300.).Shape();
2034 Handle(AIS_Shape) ais1 = new AIS_Shape(S);
2036 myAISContext->SetColor(ais1,Quantity_NOC_CORAL,Standard_False);
2037 myAISContext->SetMaterial(ais1,Graphic3d_NOM_PLASTIC,Standard_False);
2038 myAISContext->Display(ais1,Standard_False);
2039 const Handle(AIS_InteractiveObject)& anIO1 = ais1;
2040 myAISContext->SetSelected (anIO1, Standard_False);
2045 Ex.Init(S,TopAbs_FACE);
2048 TopoDS_Face F1 = TopoDS::Face(Ex.Current());
2049 Handle(Geom_Surface) surf = BRep_Tool::Surface(F1);
2050 Handle (Geom_Plane) Pl = Handle(Geom_Plane)::DownCast(surf);
2051 gp_Ax1 D = gp::OX();
2052 BRepBuilderAPI_MakeWire MW1;
2054 p1 = gp_Pnt2d(100.,100.);
2055 p2 = gp_Pnt2d(200.,100.);
2056 Handle(Geom2d_Line) aline = GCE2d_MakeLine(p1,p2).Value();
2057 MW1.Add(BRepBuilderAPI_MakeEdge(aline,surf,0.,p1.Distance(p2)));
2059 p2 = gp_Pnt2d(150.,200.);
2060 aline = GCE2d_MakeLine(p1,p2).Value();
2061 MW1.Add(BRepBuilderAPI_MakeEdge(aline,surf,0.,p1.Distance(p2)));
2063 p2 = gp_Pnt2d(100.,100.);
2064 aline = GCE2d_MakeLine(p1,p2).Value();
2065 MW1.Add(BRepBuilderAPI_MakeEdge(aline,surf,0.,p1.Distance(p2)));
2066 BRepBuilderAPI_MakeFace MKF1;
2067 MKF1.Init(surf,Standard_False, Precision::Confusion());
2068 MKF1.Add(MW1.Wire());
2069 TopoDS_Face FP = MKF1.Face();
2070 BRepLib::BuildCurves3d(FP);
2071 BRepFeat_MakeRevol MKrev(S,FP,F1,D,1,Standard_True);
2074 TopoDS_Face F2 = TopoDS::Face(Ex.Current());
2076 TopoDS_Shape res1 = MKrev.Shape();
2079 myAISContext->Remove (ais1, Standard_False);
2080 Handle(AIS_Shape) ais2 = new AIS_Shape(res1);
2081 myAISContext->Display(ais2,Standard_False);
2082 const Handle(AIS_InteractiveObject)& anIO2 = ais2;
2083 myAISContext->SetSelected (anIO2, Standard_False);
2086 TCollection_AsciiString Message ("\
2088 TopoDS_Shape S = BRepPrimAPI_MakeBox(400.,250.,300.);\n\
2089 TopExp_Explorer Ex;\n\
2090 Ex.Init(S,TopAbs_FACE);\n\
2093 TopoDS_Face F1 = TopoDS::Face(Ex.Current());\n\
2094 Handle(Geom_Surface) surf = BRep_Tool::Surface(F1);\n\
2095 Handle (Geom_Plane) Pl = Handle(Geom_Plane)::DownCast(surf);\n\
2096 gp_Ax1 D = gp::OX();\n\
2097 BRepBuilderAPI_MakeWire MW1;\n\
2099 p1 = gp_Pnt2d(100.,100.);\n\
2100 p2 = gp_Pnt2d(200.,100.);\n\
2101 Handle(Geom2d_Line) aline = GCE2d_MakeLine(p1,p2).Value();\n\
2102 MW1.Add(BRepBuilderAPI_MakeEdge(aline,surf,0.,p1.Distance(p2)));\n\
2104 p2 = gp_Pnt2d(150.,200.);\n\
2105 aline = GCE2d_MakeLine(p1,p2).Value();\n\
2106 MW1.Add(BRepBuilderAPI_MakeEdge(aline,surf,0.,p1.Distance(p2)));\n\
2108 p2 = gp_Pnt2d(100.,100.);\n\
2109 aline = GCE2d_MakeLine(p1,p2).Value();\n\
2110 MW1.Add(BRepBuilderAPI_MakeEdge(aline,surf,0.,p1.Distance(p2)));\n\
2111 BRepBuilderAPI_MakeFace MKF1;\n\
2112 MKF1.Init(surf,Standard_False);\n\
2113 MKF1.Add(MW1.Wire());\n\
2114 TopoDS_Face FP = MKF1.Face();\n\
2115 BRepLib::BuildCurves3d(FP);\n\
2116 BRepFeat_MakeRevol MKrev(S,FP,F1,D,1,Standard_True);\n\
2118 TopoDS_Face F2 = TopoDS::Face(Ex.Current());\n\
2119 MKrev.Perform(F2);\n\
2120 TopoDS_Shape res1 = MKrev.Shape();\n\
2122 PocessTextInDialog("Make a local revolution", Message);
2125 void CModelingDoc::OnGlueLocal()
2127 AIS_ListOfInteractive aList;
2128 myAISContext->DisplayedObjects(aList);
2129 AIS_ListIteratorOfListOfInteractive aListIterator;
2130 for(aListIterator.Initialize(aList);aListIterator.More();aListIterator.Next()){
2131 myAISContext->Remove (aListIterator.Value(), Standard_False);
2133 TopoDS_Shape S1 = BRepPrimAPI_MakeBox(gp_Pnt(-500., -500., 0.), gp_Pnt(-100., -250., 300.)).Shape();
2135 Handle(AIS_Shape) ais1 = new AIS_Shape(S1);
2136 myAISContext->SetColor(ais1,Quantity_NOC_ORANGE,Standard_False);
2137 myAISContext->SetMaterial(ais1,Graphic3d_NOM_PLASTIC,Standard_False);
2138 myAISContext->Display(ais1,Standard_False);
2139 const Handle(AIS_InteractiveObject)& anIO1 = ais1;
2140 myAISContext->SetSelected (anIO1, Standard_False);
2144 TopExp_Explorer Ex1;
2145 Ex1.Init(S1,TopAbs_FACE);
2151 TopoDS_Face F1 = TopoDS::Face(Ex1.Current());
2152 TopoDS_Shape S2 = BRepPrimAPI_MakeBox(gp_Pnt(-400., -400., 300.), gp_Pnt(-200., -300., 500.)).Shape();
2153 Handle(AIS_Shape) ais2 = new AIS_Shape(S2);
2155 myAISContext->SetColor(ais2,Quantity_NOC_AZURE,Standard_False);
2156 myAISContext->SetMaterial(ais2,Graphic3d_NOM_PLASTIC,Standard_False);
2157 myAISContext->Display(ais2,Standard_False);
2158 const Handle(AIS_InteractiveObject)& anIO2 = ais2;
2159 myAISContext->SetSelected (anIO2, Standard_False);
2163 TopExp_Explorer Ex2;
2164 Ex2.Init(S2,TopAbs_FACE);
2169 TopoDS_Face F2 = TopoDS::Face(Ex2.Current());
2170 BRepFeat_Gluer glue(S2,S1);
2172 TopoDS_Shape res1 = glue.Shape();
2173 myAISContext->Erase(ais2,Standard_False);
2177 myAISContext->Redisplay (ais1, Standard_False);
2178 myAISContext->SetSelected(anIO1,Standard_False);
2182 TopoDS_Shape S3 = BRepPrimAPI_MakeBox(500., 400., 300.).Shape();
2184 Handle(AIS_Shape) ais3 = new AIS_Shape(S3);
2185 myAISContext->SetColor(ais3,Quantity_NOC_ORANGE,Standard_False);
2186 myAISContext->SetMaterial(ais3,Graphic3d_NOM_PLASTIC,Standard_False);
2187 myAISContext->Display(ais3,Standard_False);
2188 const Handle(AIS_InteractiveObject)& anIO3 = ais3;
2189 myAISContext->SetSelected (anIO3, Standard_False);
2193 TopExp_Explorer Ex3;
2194 Ex3.Init(S3,TopAbs_FACE);
2200 TopoDS_Face F3 = TopoDS::Face(Ex3.Current());
2201 TopoDS_Shape S4 = BRepPrimAPI_MakeBox(gp_Pnt(0., 0., 300.), gp_Pnt(200., 200., 500.)).Shape();
2203 Handle(AIS_Shape) ais4 = new AIS_Shape(S4);
2204 myAISContext->SetColor(ais4,Quantity_NOC_AZURE,Standard_False);
2205 myAISContext->SetMaterial(ais4,Graphic3d_NOM_PLASTIC,Standard_False);
2206 myAISContext->Display(ais4,Standard_False);
2207 const Handle(AIS_InteractiveObject)& anIO4 = ais4;
2208 myAISContext->SetSelected (anIO4, Standard_False);
2212 TopExp_Explorer Ex4;
2213 Ex4.Init(S4,TopAbs_FACE);
2218 TopoDS_Face F4 = TopoDS::Face(Ex4.Current());
2219 BRepFeat_Gluer glue2(S4,S3);
2221 LocOpe_FindEdges CommonEdges(F4,F3);
2222 for (CommonEdges.InitIterator(); CommonEdges.More(); CommonEdges.Next())
2223 glue2.Bind(CommonEdges.EdgeFrom(),CommonEdges.EdgeTo());
2224 TopoDS_Shape res2 = glue2.Shape();
2225 myAISContext->Erase(ais3,Standard_False);
2229 myAISContext->Redisplay(ais4,Standard_False);
2230 myAISContext->SetSelected(anIO4,Standard_False);
2234 TCollection_AsciiString Message ("\
2236 --- Without common edges ---\n\
2238 TopoDS_Shape S1 = BRepPrimAPI_MakeBox(gp_Pnt(-500.,-500.,0.),gp_Pnt(-100.,-250.,300.));\n\
2239 TopExp_Explorer Ex1;\n\
2240 Ex1.Init(S1,TopAbs_FACE);\n\
2246 TopoDS_Face F1 = TopoDS::Face(Ex1.Current());\n\
2247 TopoDS_Shape S2 = BRepPrimAPI_MakeBox(gp_Pnt(-400.,-400.,300.),gp_Pnt(-200.,-300.,500.));\n\
2248 TopExp_Explorer Ex2;\n\
2249 Ex2.Init(S2,TopAbs_FACE);\n\
2254 TopoDS_Face F2 = TopoDS::Face(Ex2.Current());\n\
2255 BRepFeat_Gluer glue(S2,S1);\n\
2256 glue.Bind(F2,F1);\n\
2257 TopoDS_Shape res1 = glue.Shape();\n\
2259 --- With common edges ---\n\
2261 TopoDS_Shape S3 = BRepPrimAPI_MakeBox(500.,400.,300.);\n\
2262 TopExp_Explorer Ex3;\n\
2263 Ex3.Init(S3,TopAbs_FACE);\n\
2269 TopoDS_Face F3 = TopoDS::Face(Ex3.Current());\n\
2270 TopoDS_Shape S4 = BRepPrimAPI_MakeBox(gp_Pnt(0.,0.,300.),gp_Pnt(200.,200.,500.));\n\
2271 TopExp_Explorer Ex4;\n\
2272 Ex4.Init(S4,TopAbs_FACE);\n\
2277 TopoDS_Face F4 = TopoDS::Face(Ex4.Current());\n\
2278 BRepFeat_Gluer glue2(S4,S3);\n\
2279 glue2.Bind(F4,F3);\n\
2280 LocOpe_FindEdges CommonEdges(F4,F3);\n\
2281 for (CommonEdges.InitIterator(); CommonEdges.More(); CommonEdges.Next()) \n\
2282 glue2.Bind(CommonEdges.EdgeFrom(),CommonEdges.EdgeTo());\n\
2283 TopoDS_Shape res2 = glue2.Shape();\n\
2285 PocessTextInDialog("Glue two solids", Message);
2289 void CModelingDoc::OnPipeLocal()
2291 AIS_ListOfInteractive aList;
2292 myAISContext->DisplayedObjects(aList);
2293 AIS_ListIteratorOfListOfInteractive aListIterator;
2294 for(aListIterator.Initialize(aList);aListIterator.More();aListIterator.Next()){
2295 myAISContext->Remove (aListIterator.Value(), Standard_False);
2297 TopoDS_Shape S = BRepPrimAPI_MakeBox(400., 250., 300.).Shape();
2298 Handle(AIS_Shape) ais1 = new AIS_Shape(S);
2300 myAISContext->SetColor(ais1,Quantity_NOC_CORAL,Standard_False);
2301 myAISContext->SetMaterial(ais1,Graphic3d_NOM_PLASTIC,Standard_False);
2302 myAISContext->Display(ais1,Standard_False);
2303 const Handle(AIS_InteractiveObject)& anIO1 = ais1;
2304 myAISContext->SetSelected (anIO1, Standard_False);
2309 Ex.Init(S,TopAbs_FACE);
2312 TopoDS_Face F1 = TopoDS::Face(Ex.Current());
2313 Handle(Geom_Surface) surf = BRep_Tool::Surface(F1);
2314 BRepBuilderAPI_MakeWire MW1;
2316 p1 = gp_Pnt2d(100.,100.);
2317 p2 = gp_Pnt2d(200.,100.);
2318 Handle(Geom2d_Line) aline = GCE2d_MakeLine(p1,p2).Value();
2319 MW1.Add(BRepBuilderAPI_MakeEdge(aline,surf,0.,p1.Distance(p2)));
2321 p2 = gp_Pnt2d(150.,200.);
2322 aline = GCE2d_MakeLine(p1,p2).Value();
2323 MW1.Add(BRepBuilderAPI_MakeEdge(aline,surf,0.,p1.Distance(p2)));
2325 p2 = gp_Pnt2d(100.,100.);
2326 aline = GCE2d_MakeLine(p1,p2).Value();
2327 MW1.Add(BRepBuilderAPI_MakeEdge(aline,surf,0.,p1.Distance(p2)));
2328 BRepBuilderAPI_MakeFace MKF1;
2329 MKF1.Init(surf,Standard_False, Precision::Confusion());
2330 MKF1.Add(MW1.Wire());
2331 TopoDS_Face FP = MKF1.Face();
2332 BRepLib::BuildCurves3d(FP);
2333 TColgp_Array1OfPnt CurvePoles(1,3);
2334 gp_Pnt pt = gp_Pnt(150.,0.,150.);
2336 pt = gp_Pnt(200.,-100.,150.);
2338 pt = gp_Pnt(150.,-200.,150.);
2340 Handle(Geom_BezierCurve) curve = new Geom_BezierCurve(CurvePoles);
2341 TopoDS_Edge E = BRepBuilderAPI_MakeEdge(curve);
2342 TopoDS_Wire W = BRepBuilderAPI_MakeWire(E);
2343 BRepFeat_MakePipe MKPipe(S,FP,F1,W,1,Standard_True);
2345 TopoDS_Shape res1 = MKPipe.Shape();
2348 myAISContext->Redisplay(ais1,Standard_False);
2349 myAISContext->SetSelected(anIO1,Standard_False);
2352 TCollection_AsciiString Message ("\
2354 TopoDS_Shape S = BRepPrimAPI_MakeBox(400.,250.,300.);\n\
2355 TopExp_Explorer Ex;\n\
2356 Ex.Init(S,TopAbs_FACE);\n\
2359 TopoDS_Face F1 = TopoDS::Face(Ex.Current());\n\
2360 Handle(Geom_Surface) surf = BRep_Tool::Surface(F1);\n\
2361 BRepBuilderAPI_MakeWire MW1;\n\
2363 p1 = gp_Pnt2d(100.,100.);\n\
2364 p2 = gp_Pnt2d(200.,100.);\n\
2365 Handle(Geom2d_Line) aline = GCE2d_MakeLine(p1,p2).Value();\n\
2366 MW1.Add(BRepBuilderAPI_MakeEdge(aline,surf,0.,p1.Distance(p2)));\n\
2368 p2 = gp_Pnt2d(150.,200.);\n\
2369 aline = GCE2d_MakeLine(p1,p2).Value();\n\
2370 MW1.Add(BRepBuilderAPI_MakeEdge(aline,surf,0.,p1.Distance(p2)));\n\
2372 p2 = gp_Pnt2d(100.,100.);\n\
2373 aline = GCE2d_MakeLine(p1,p2).Value();\n\
2374 MW1.Add(BRepBuilderAPI_MakeEdge(aline,surf,0.,p1.Distance(p2)));\n\
2375 BRepBuilderAPI_MakeFace MKF1;\n\
2376 MKF1.Init(surf,Standard_False);\n\
2377 TopoDS_Face FP = MKF1.Face();\n\
2378 BRepLib::BuildCurves3d(FP);\n\
2379 TColgp_Array1OfPnt CurvePoles(1,3);\n\
2380 gp_Pnt pt = gp_Pnt(150.,0.,150.);\n\
2381 CurvePoles(1) = pt;\n\
2382 pt = gp_Pnt(200.,-100.,150.);\n\
2383 CurvePoles(2) = pt;\n\
2384 pt = gp_Pnt(150.,-200.,150.);\n\
2385 CurvePoles(3) = pt;\n\
2386 Handle(Geom_BezierCurve) curve = new Geom_BezierCurve(CurvePoles);\n\
2387 TopoDS_Edge E = BRepBuilderAPI_MakeEdge(curve);\n\
2388 TopoDS_Wire W = BRepBuilderAPI_MakeWire(E);\n\
2389 BRepFeat_MakePipe MKPipe(S,FP,F1,W,1,Standard_True);\n\
2390 MKPipe.Perform();\n\
2391 TopoDS_Shape res1 = MKPipe.Shape();\n\
2393 PocessTextInDialog("Make a local pipe", Message);
2397 void CModelingDoc::OnLinearLocal()
2399 AIS_ListOfInteractive aList;
2400 myAISContext->DisplayedObjects(aList);
2401 AIS_ListIteratorOfListOfInteractive aListIterator;
2402 for(aListIterator.Initialize(aList);aListIterator.More();aListIterator.Next()){
2403 myAISContext->Remove (aListIterator.Value(), Standard_False);
2405 BRepBuilderAPI_MakeWire mkw;
2406 gp_Pnt p1 = gp_Pnt(0.,0.,0.);
2407 gp_Pnt p2 = gp_Pnt(200.,0.,0.);
2408 mkw.Add(BRepBuilderAPI_MakeEdge(p1,p2));
2410 p2 = gp_Pnt(200.,0.,50.);
2411 mkw.Add(BRepBuilderAPI_MakeEdge(p1,p2));
2413 p2 = gp_Pnt(50.,0.,50.);
2414 mkw.Add(BRepBuilderAPI_MakeEdge(p1,p2));
2416 p2 = gp_Pnt(50.,0.,200.);
2417 mkw.Add(BRepBuilderAPI_MakeEdge(p1,p2));
2419 p2 = gp_Pnt(0.,0.,200.);
2420 mkw.Add(BRepBuilderAPI_MakeEdge(p1,p2));
2422 mkw.Add(BRepBuilderAPI_MakeEdge(p2,gp_Pnt(0.,0.,0.)));
2424 TopoDS_Shape S = BRepPrimAPI_MakePrism(BRepBuilderAPI_MakeFace(mkw.Wire()),
2425 gp_Vec(gp_Pnt(0.,0.,0.),gp_Pnt(0.,100.,0.)));
2427 Handle(AIS_Shape) ais1 = new AIS_Shape(S);
2428 myAISContext->SetColor(ais1,Quantity_NOC_CYAN2,Standard_False);
2429 myAISContext->SetMaterial(ais1,Graphic3d_NOM_PLASTIC,Standard_False);
2430 myAISContext->Display(ais1,Standard_False);
2431 const Handle(AIS_InteractiveObject)& anIO1 = ais1;
2432 myAISContext->SetSelected (anIO1, Standard_False);
2436 TopoDS_Wire W = BRepBuilderAPI_MakeWire(BRepBuilderAPI_MakeEdge(gp_Pnt(50.,45.,100.),
2437 gp_Pnt(100.,45.,50.)));
2438 Handle(Geom_Plane) aplane = new Geom_Plane(0.,1.,0.,-45.);
2439 BRepFeat_MakeLinearForm aform(S, W, aplane, gp_Vec(0.,10.,0.), gp_Vec(0.,0.,0.),
2441 aform.Perform(/*10.*/); // new in 2.0
2443 TopoDS_Shape res = aform.Shape();
2445 myAISContext->Redisplay(ais1,Standard_False);
2446 myAISContext->SetSelected (anIO1, Standard_False);
2449 TCollection_AsciiString Message ("\
2451 BRepBuilderAPI_MakeWire mkw;\n\
2452 gp_Pnt p1 = gp_Pnt(0.,0.,0.);\n\
2453 gp_Pnt p2 = gp_Pnt(200.,0.,0.);\n\
2454 mkw.Add(BRepBuilderAPI_MakeEdge(p1,p2));\n\
2456 p2 = gp_Pnt(200.,0.,50.);\n\
2457 mkw.Add(BRepBuilderAPI_MakeEdge(p1,p2));\n\
2459 p2 = gp_Pnt(50.,0.,50.);\n\
2460 mkw.Add(BRepBuilderAPI_MakeEdge(p1,p2));\n\
2462 p2 = gp_Pnt(50.,0.,200.);\n\
2463 mkw.Add(BRepBuilderAPI_MakeEdge(p1,p2));\n\
2465 p2 = gp_Pnt(0.,0.,200.);\n\
2466 mkw.Add(BRepBuilderAPI_MakeEdge(p1,p2));\n\
2468 mkw.Add(BRepBuilderAPI_MakeEdge(p2,gp_Pnt(0.,0.,0.)));\n\
2469 TopoDS_Shape S = BRepPrimAPI_MakePrism(BRepBuilderAPI_MakeFace(mkw.Wire()), \n\
2470 gp_Vec(gp_Pnt(0.,0.,0.),gp_Pnt(0.,100.,0.)));\n\
2471 TopoDS_Wire W = BRepBuilderAPI_MakeWire(BRepBuilderAPI_MakeEdge(gp_Pnt(50.,45.,100.),\n\
2472 gp_Pnt(100.,45.,50.)));\n\
2473 Handle(Geom_Plane) aplane = new Geom_Plane(0.,1.,0.,-45.);\n\
2474 BRepFeat_MakeLinearForm aform(S, W, aplane, gp_Dir(0.,10.,0.), gp_Dir(0.,0.,0.),\n\
2475 1, Standard_True);\n\
2476 aform.Perform(10.);\n\
2477 TopoDS_Shape res = aform.Shape();\n\
2479 PocessTextInDialog("Make a rib", Message);
2483 void CModelingDoc::OnSplitLocal()
2485 AIS_ListOfInteractive aList;
2486 myAISContext->DisplayedObjects(aList);
2487 AIS_ListIteratorOfListOfInteractive aListIterator;
2488 for(aListIterator.Initialize(aList);aListIterator.More();aListIterator.Next()){
2489 myAISContext->Remove (aListIterator.Value(), Standard_False);
2492 TopoDS_Shape S = BRepPrimAPI_MakeBox(gp_Pnt(-100, -60, -80), 150, 200, 170).Shape();
2494 Handle(AIS_Shape) ais1 = new AIS_Shape(S);
2495 myAISContext->SetColor(ais1,Quantity_NOC_RED,Standard_False);
2496 myAISContext->SetMaterial(ais1,Graphic3d_NOM_PLASTIC,Standard_False);
2497 myAISContext->Display(ais1,Standard_False);
2498 const Handle(AIS_InteractiveObject)& anIO1 = ais1;
2499 myAISContext->SetSelected (anIO1, Standard_False);
2503 BRepAlgoAPI_Section asect(S, gp_Pln(1,2,1,-15),Standard_False);
2504 asect.ComputePCurveOn1(Standard_True);
2505 asect.Approximation(Standard_True);
2507 TopoDS_Shape R = asect.Shape();
2509 BRepFeat_SplitShape asplit(S);
2511 for (TopExp_Explorer Ex(R,TopAbs_EDGE); Ex.More(); Ex.Next()) {
2512 TopoDS_Shape anEdge = Ex.Current();
2514 if (asect.HasAncestorFaceOn1(anEdge,aFace)) {
2515 TopoDS_Face F = TopoDS::Face(aFace);
2516 TopoDS_Edge E = TopoDS::Edge(anEdge);
2524 myAISContext->Erase(ais1,Standard_False);
2527 TopoDS_Shape Result = asplit.Shape();
2529 Handle(AIS_Shape) ais2 = new AIS_Shape(Result);
2531 myAISContext->SetColor(ais2,Quantity_NOC_RED,Standard_False);
2532 myAISContext->SetMaterial(ais2,Graphic3d_NOM_PLASTIC,Standard_False);
2533 myAISContext->SetDisplayMode(ais2,1,Standard_False);
2534 myAISContext->Display(ais2,Standard_False);
2535 const Handle(AIS_InteractiveObject)& anIO2 = ais2;
2536 myAISContext->SetSelected (anIO2, Standard_False);
2538 TCollection_AsciiString Message ("\
2540 TopoDS_Shape S = BRepPrimAPI_MakeBox(gp_Pnt(-100,-60,-80),150,200,170); \n\
2542 BRepBuilderAPI_Section asect(S, gp_Pln(1,2,1,-15),Standard_False); \n\
2543 asect.ComputePCurveOn1(Standard_True); \n\
2544 asect.Approximation(Standard_True); \n\
2546 TopoDS_Shape R = asect.Shape(); \n\
2548 BRepFeat_SplitShape asplit(S); \n\
2550 for (TopExp_Explorer Ex(R,TopAbs_EDGE); Ex.More(); Ex.Next()) { \n\
2551 TopoDS_Shape anEdge = Ex.Current(); \n\
2552 TopoDS_Shape aFace; \n\
2553 if (asect.HasAncestorFaceOn1(anEdge,aFace)) { \n\
2554 TopoDS_Face F = TopoDS::Face(aFace); \n\
2555 TopoDS_Edge E = TopoDS::Edge(anEdge); \n\
2556 asplit.Add(E,F); \n\
2562 TopoDS_Shape Result = asplit.Shape(); \n\
2566 PocessTextInDialog("Split a shape", Message);
2571 void CModelingDoc::OnThickLocal()
2573 AIS_ListOfInteractive L;
2574 myAISContext->DisplayedObjects(L);
2575 AIS_ListIteratorOfListOfInteractive aListIterator;
2576 for(aListIterator.Initialize(L);aListIterator.More();aListIterator.Next()){
2577 myAISContext->Remove (aListIterator.Value(), Standard_False);
2580 TopoDS_Shape S1 = BRepPrimAPI_MakeBox(150, 200, 110).Shape();
2582 Handle(AIS_Shape) abox1 = new AIS_Shape(S1);
2583 myAISContext->SetColor (abox1, Quantity_NOC_WHITE, Standard_False);
2584 myAISContext->SetMaterial(abox1,Graphic3d_NOM_PLASTIC,Standard_False);
2585 myAISContext->Display(abox1,Standard_False);
2586 const Handle(AIS_InteractiveObject)& anIOBox1 = abox1;
2587 myAISContext->SetSelected (anIOBox1, Standard_False);
2591 TopTools_ListOfShape aList;
2592 TopExp_Explorer Ex(S1,TopAbs_FACE);
2593 Ex.Next(); //this is the front face
2594 TopoDS_Shape aFace = Ex.Current();
2595 aList.Append(aFace);
2597 BRepOffsetAPI_MakeThickSolid aSolidMaker;
2598 aSolidMaker.MakeThickSolidByJoin(S1,aList,10,0.01);
2599 TopoDS_Shape aThickSolid = aSolidMaker.Shape();
2601 Handle(AIS_Shape) ais1 = new AIS_Shape(aThickSolid);
2602 myAISContext->SetColor(ais1,Quantity_NOC_RED,Standard_False);
2603 myAISContext->SetMaterial(ais1,Graphic3d_NOM_PLASTIC,Standard_False);
2604 myAISContext->Display(ais1,Standard_False);
2605 const Handle(AIS_InteractiveObject)& anIO1 = ais1;
2606 myAISContext->SetSelected (anIO1, Standard_False);
2610 myAISContext->Erase(abox1,Standard_True);
2614 TCollection_AsciiString Message ("\
2616 TopoDS_Shape S = BRepPrimAPI_MakeBox(150,200,110); \n\
2618 TopTools_ListOfShape aList; \n\
2619 TopExp_Explorer Ex(S,TopAbs_FACE); \n\
2620 Ex.Next(); //in order to recover the front face \n\
2621 TopoDS_Shape aFace = Ex.Current(); \n\
2622 aList.Append(aFace); \n\
2624 TopoDS_Shape aThickSolid = BRepPrimAPI_MakeThickSolid(S,aList,15,0.01); \n\
2627 PocessTextInDialog("Make a thick solid", Message);
2630 void CModelingDoc::OnOffsetLocal()
2632 AIS_ListOfInteractive aList;
2633 myAISContext->DisplayedObjects(aList);
2634 AIS_ListIteratorOfListOfInteractive aListIterator;
2635 for(aListIterator.Initialize(aList);aListIterator.More();aListIterator.Next()){
2636 myAISContext->Remove (aListIterator.Value(), Standard_False);
2639 TopoDS_Shape S1 = BRepPrimAPI_MakeBox(150, 200, 110).Shape();
2641 Handle(AIS_Shape) aisBox1 = new AIS_Shape(S1);
2642 myAISContext->SetColor(aisBox1,Quantity_NOC_BROWN,Standard_False);
2643 myAISContext->SetMaterial(aisBox1,Graphic3d_NOM_GOLD,Standard_False);
2644 myAISContext->Display(aisBox1,Standard_False);
2648 BRepOffsetAPI_MakeOffsetShape aShapeMaker1;
2649 aShapeMaker1.PerformByJoin(S1,60,0.01);
2650 TopoDS_Shape anOffsetShape1 = aShapeMaker1.Shape();
2652 Handle(AIS_Shape) ais1 = new AIS_Shape(anOffsetShape1);
2653 myAISContext->SetColor(ais1,Quantity_NOC_MATRABLUE,Standard_False);
2654 myAISContext->SetMaterial(ais1,Graphic3d_NOM_GOLD,Standard_False);
2655 myAISContext->SetTransparency(ais1,0.5,Standard_False);
2656 myAISContext->Display(ais1,Standard_False);
2660 TopoDS_Shape S2 = BRepPrimAPI_MakeBox(gp_Pnt(500, 0, 0), 220, 140, 180).Shape();
2662 Handle(AIS_Shape) aisBox2 = new AIS_Shape(S2);
2663 myAISContext->SetColor(aisBox2,Quantity_NOC_WHITE,Standard_False);
2664 myAISContext->SetMaterial(aisBox2,Graphic3d_NOM_GOLD,Standard_False);
2665 myAISContext->SetTransparency(aisBox2,0.5,Standard_False);
2666 myAISContext->Display(aisBox2,Standard_False);
2670 BRepOffsetAPI_MakeOffsetShape aShapeMaker2;
2671 aShapeMaker2.PerformByJoin(S2,-40,0.01,
2672 BRepOffset_Skin,Standard_False,Standard_False,GeomAbs_Arc);
2673 TopoDS_Shape anOffsetShape2 = aShapeMaker2.Shape();
2675 Handle(AIS_Shape) ais2 = new AIS_Shape(anOffsetShape2);
2676 myAISContext->SetColor (ais2, Quantity_NOC_MATRABLUE, Standard_False);
2677 myAISContext->SetMaterial(ais2,Graphic3d_NOM_GOLD,Standard_False);
2678 myAISContext->Display (ais2, Standard_False);
2681 TCollection_AsciiString Message ("\
2684 TopoDS_Shape S1 = BRepPrimAPI_MakeBox(150,200,110); \n\
2686 TopoDS_Shape anOffsetShape1 = BRepPrimAPI_MakeOffsetShape(S1,60,0.01); \n\
2690 TopoDS_Shape S2 = BRepPrimAPI_MakeBox(gp_Pnt(300,0,0),220,140,180); \n\
2692 TopoDS_Shape anOffsetShape2 = BRepPrimAPI_MakeOffsetShape(S2,-20,0.01, \n\
2693 BRepOffset_Skin,Standard_False,Standard_False,GeomAbs_Arc); \n\
2697 PocessTextInDialog("Make an offset shape", Message);
2701 /* =================================================================================
2702 ==================== B U I L D I N G ========================================
2703 ================================================================================= */
2706 void CModelingDoc::OnVertex()
2708 AIS_ListOfInteractive aList;
2709 myAISContext->DisplayedObjects(aList);
2710 AIS_ListIteratorOfListOfInteractive aListIterator;
2711 for(aListIterator.Initialize(aList);aListIterator.More();aListIterator.Next()){
2712 myAISContext->Remove (aListIterator.Value(), Standard_False);
2715 TopoDS_Vertex V1,V2,V3;
2717 V1 = BRepBuilderAPI_MakeVertex(gp_Pnt(0,0,0));
2718 V2 = BRepBuilderAPI_MakeVertex(gp_Pnt(10,7,25));
2721 BRepBuilderAPI_MakeVertex MV(P);
2724 Handle(AIS_Shape) Point1 = new AIS_Shape(V1);
2725 myAISContext->Display(Point1,Standard_False);
2726 Handle(AIS_Shape) Point2 = new AIS_Shape(V2);
2727 myAISContext->Display(Point2,Standard_False);
2728 Handle(AIS_Shape) Point3 = new AIS_Shape(V3);
2729 myAISContext->Display(Point3,Standard_False);
2733 TCollection_AsciiString Message ("\
2735 TopoDS_Vertex V1,V2,V3; \n\
2737 V1 = BRepBuilderAPI_MakeVertex(gp_Pnt(0,0,0)); \n\
2739 V2 = BRepBuilderAPI_MakeVertex(gp_Pnt(10,7,25)); \n\
2741 gp_Pnt P(-12,8,-4); \n\
2742 BRepBuilderAPI_MakeVertex MV(P); \n\
2743 V3 = MV.Vertex(); \n\
2747 PocessTextInDialog("Make vertex from point ", Message);
2751 void CModelingDoc::OnEdge()
2754 AIS_ListOfInteractive aList;
2755 myAISContext->DisplayedObjects(aList);
2756 AIS_ListIteratorOfListOfInteractive aListIterator;
2757 for(aListIterator.Initialize(aList);aListIterator.More();aListIterator.Next()){
2758 myAISContext->Remove (aListIterator.Value(), Standard_False);
2762 TopoDS_Edge BlueEdge,YellowEdge,WhiteEdge,RedEdge,GreenEdge;
2763 TopoDS_Vertex V1,V2,V3,V4;
2765 /////////////The blue edge
2767 BlueEdge = BRepBuilderAPI_MakeEdge(gp_Pnt(-80,-50,-20),gp_Pnt(-30,-60,-60));
2769 /////////////The yellow edge
2771 V1 = BRepBuilderAPI_MakeVertex(gp_Pnt(-20,10,-30));
2772 V2 = BRepBuilderAPI_MakeVertex(gp_Pnt(10,7,-25));
2773 YellowEdge = BRepBuilderAPI_MakeEdge(V1,V2);
2775 /////////////The white edge
2777 gp_Lin line(gp_Ax1(gp_Pnt(10,10,10),gp_Dir(1,0,0)));
2778 WhiteEdge = BRepBuilderAPI_MakeEdge(line,-20,10);
2780 //////////////The red edge
2782 gp_Elips Elips(gp_Ax2(gp_Pnt(10,0,0),gp_Dir(1,1,1)),60,30);
2783 RedEdge = BRepBuilderAPI_MakeEdge(Elips,0,M_PI/2);
2785 /////////////The green edge and the both extreme vertex
2787 gp_Pnt P1(-15,200,10);
2789 gp_Pnt P3(15,200,0);
2790 gp_Pnt P4(-15,20,15);
2793 gp_Pnt P7(24,120,0);
2794 gp_Pnt P8(-24,120,12.5);
2795 TColgp_Array1OfPnt array(1,8);
2796 array.SetValue(1,P1);
2797 array.SetValue(2,P2);
2798 array.SetValue(3,P3);
2799 array.SetValue(4,P4);
2800 array.SetValue(5,P5);
2801 array.SetValue(6,P6);
2802 array.SetValue(7,P7);
2803 array.SetValue(8,P8);
2804 Handle (Geom_BezierCurve) curve = new Geom_BezierCurve(array);
2806 BRepBuilderAPI_MakeEdge ME (curve);
2811 //////////////Display
2812 Handle(AIS_Shape) blue = new AIS_Shape(BlueEdge);
2813 myAISContext->SetColor(blue,Quantity_NOC_MATRABLUE,Standard_False);
2814 myAISContext->Display(blue,Standard_False);
2816 Handle(AIS_Shape) yellow = new AIS_Shape(YellowEdge);
2817 myAISContext->SetColor(yellow,Quantity_NOC_YELLOW,Standard_False);
2818 myAISContext->Display(yellow,Standard_False);
2820 Handle(AIS_Shape) white = new AIS_Shape(WhiteEdge);
2821 myAISContext->SetColor(white,Quantity_NOC_WHITE,Standard_False);
2822 myAISContext->Display(white,Standard_False);
2824 Handle(AIS_Shape) red = new AIS_Shape(RedEdge);
2825 myAISContext->SetColor(red,Quantity_NOC_RED,Standard_False);
2826 myAISContext->Display(red,Standard_False);
2828 Handle(AIS_Shape) green = new AIS_Shape(GreenEdge);
2829 myAISContext->SetColor(green,Quantity_NOC_GREEN,Standard_False);
2830 myAISContext->Display(green,Standard_False);
2832 Handle(AIS_Shape) Point1 = new AIS_Shape(V3);
2833 myAISContext->Display(Point1,Standard_False);
2834 Handle(AIS_Shape) Point2 = new AIS_Shape(V4);
2835 myAISContext->Display(Point2,Standard_False);
2839 TCollection_AsciiString Message ("\
2841 TopoDS_Edge BlueEdge, YellowEdge, WhiteEdge, RedEdge, GreenEdge; \n\
2842 TopoDS_Vertex V1,V2,V3,V4; \n\
2844 /////////////The blue edge \n\
2846 BlueEdge = BRepBuilderAPI_MakeEdge(gp_Pnt(-80,-50,-20),gp_Pnt(-30,-60,-60)); \n\
2848 /////////////The yellow edge \n\
2850 V1 = BRepBuilderAPI_MakeVertex(gp_Pnt(-20,10,-30)); \n\
2851 V2 = BRepBuilderAPI_MakeVertex(gp_Pnt(10,7,-25)); \n\
2852 YellowEdge = BRepBuilderAPI_MakeEdge(V1,V2); \n\
2854 /////////////The white edge \n\
2856 gp_Lin line(gp_Ax1(gp_Pnt(10,10,10),gp_Dir(1,0,0))); \n\
2857 WhiteEdge = BRepBuilderAPI_MakeEdge(line,-20,10); \n\
2859 //////////////The red edge \n\
2861 gp_Elips Elips(gp_Ax2(gp_Pnt(10,0,0),gp_Dir(1,1,1)),60,30); \n\
2862 RedEdge = BRepBuilderAPI_MakeEdge(Elips,0,PI/2); \n\
2864 /////////////The green edge and the both extreme vertex \n\
2866 gp_Pnt P1(-15,200,10); \n\
2867 gp_Pnt P2(5,204,0); \n\
2868 gp_Pnt P3(15,200,0); \n\
2869 gp_Pnt P4(-15,20,15); \n\
2870 gp_Pnt P5(-5,20,0); \n\
2871 gp_Pnt P6(15,20,0); \n\
2872 gp_Pnt P7(24,120,0); \n\
2873 gp_Pnt P8(-24,120,12.5); \n\
2874 TColgp_Array1OfPnt array(1,8); \n\
2875 array.SetValue(1,P1); \n\
2876 array.SetValue(2,P2); \n\
2877 array.SetValue(3,P3); \n\
2878 array.SetValue(4,P4); \n\
2879 array.SetValue(5,P5); \n\
2880 array.SetValue(6,P6); \n\
2881 array.SetValue(7,P7); \n\
2882 array.SetValue(8,P8); \n\
2883 Handle (Geom_BezierCurve) curve = new Geom_BezierCurve(array); \n\
2885 BRepBuilderAPI_MakeEdge ME (curve); \n\
2887 V3 = ME.Vertex1(); \n\
2888 V4 = ME.Vertex2(); \n\
2892 PocessTextInDialog("Make edge", Message);
2896 void CModelingDoc::OnWire()
2898 AIS_ListOfInteractive aList;
2899 myAISContext->DisplayedObjects(aList);
2900 AIS_ListIteratorOfListOfInteractive aListIterator;
2901 for(aListIterator.Initialize(aList);aListIterator.More();aListIterator.Next()){
2902 myAISContext->Remove (aListIterator.Value(), Standard_False);
2905 TopoDS_Wire RedWire,YellowWire,WhiteWire,
2906 ExistingWire, ExistingWire2;
2908 TopoDS_Edge Edge1,Edge2,Edge3,Edge4,Edge5,Edge6,Edge7,LastEdge;
2909 TopoDS_Vertex LastVertex;
2911 ////////////The red wire is build from a single edge
2913 gp_Elips Elips(gp_Ax2(gp_Pnt(250,0,0),gp_Dir(1,1,1)),160,90);
2914 Edge1 = BRepBuilderAPI_MakeEdge(Elips,0,M_PI/2);
2916 RedWire = BRepBuilderAPI_MakeWire(Edge1);
2918 ///////////the yellow wire is build from an existing wire and an edge
2920 gp_Circ circle(gp_Ax2(gp_Pnt(-300,0,0),gp_Dir(1,0,0)),80);
2921 Edge2 = BRepBuilderAPI_MakeEdge(circle,0,M_PI);
2923 ExistingWire = BRepBuilderAPI_MakeWire(Edge2);
2925 Edge3 = BRepBuilderAPI_MakeEdge(gp_Pnt(-300,0,-80),gp_Pnt(-90,20,-30));
2927 BRepBuilderAPI_MakeWire MW1(ExistingWire,Edge3);
2933 //////////the white wire is built with an existing wire and 3 edges.
2934 //////////we use the methods Add, Edge and Vertex from BRepBuilderAPI_MakeWire.
2936 gp_Circ circle2(gp_Ax2(gp_Pnt(0,0,0),gp_Dir(0,1,0)),200);
2937 Edge4 = BRepBuilderAPI_MakeEdge(circle2,0,M_PI);
2939 ExistingWire2 = BRepBuilderAPI_MakeWire(Edge4);
2941 gp_Pnt P1(0,0,-200);
2943 Edge5 = BRepBuilderAPI_MakeEdge(P1,P2);
2945 gp_Pnt P3(-15,20,15);
2946 Edge6 = BRepBuilderAPI_MakeEdge(P2,P3);
2948 Edge7 = BRepBuilderAPI_MakeEdge(P3,P4);
2950 BRepBuilderAPI_MakeWire MW;
2951 MW.Add(ExistingWire2);
2957 WhiteWire = MW.Wire();
2958 LastEdge = MW.Edge();
2959 LastVertex = MW.Vertex();
2963 Handle(AIS_Shape) red = new AIS_Shape(RedWire);
2964 myAISContext->SetColor(red,Quantity_NOC_RED,Standard_False);
2965 myAISContext->Display(red,Standard_False);
2967 Handle(AIS_Shape) yellow = new AIS_Shape(YellowWire);
2968 myAISContext->SetColor(yellow,Quantity_NOC_YELLOW,Standard_False);
2969 myAISContext->Display(yellow,Standard_False);
2971 Handle(AIS_Shape) white = new AIS_Shape(WhiteWire);
2972 myAISContext->SetColor(white,Quantity_NOC_WHITE,Standard_False);
2973 myAISContext->Display(white,Standard_False);
2975 Handle(AIS_Shape) lastE = new AIS_Shape(LastEdge);
2976 myAISContext->SetWidth(lastE,3,Standard_False);
2977 myAISContext->SetColor(lastE,Quantity_NOC_RED,Standard_False);
2978 myAISContext->Display(lastE,Standard_False);
2980 Handle(AIS_Shape) lastV = new AIS_Shape(LastVertex);
2981 myAISContext->Display(lastV,Standard_False);
2985 TCollection_AsciiString Message ("\
2987 TopoDS_Wire RedWire,YellowWire,WhiteWire, \n\
2988 ExistingWire, ExistingWire2; \n\
2990 TopoDS_Edge Edge1,Edge2,Edge3,Edge4,Edge5,Edge6,Edge7,LastEdge; \n\
2991 TopoDS_Vertex LastVertex; \n\
2993 ////////////The red wire is build from a single edge \n\
2995 gp_Elips Elips(gp_Ax2(gp_Pnt(10,0,0),gp_Dir(1,1,1)),160,90); \n\
2996 Edge1 = BRepBuilderAPI_MakeEdge(Elips,0,PI/2); \n\
2998 RedWire = BRepBuilderAPI_MakeWire(Edge1); \n\
3000 ///////////the yellow wire is build from an existing wire and an edge \n\
3002 gp_Circ circle(gp_Ax2(gp_Pnt(0,0,0),gp_Dir(1,0,0)),80); \n\
3003 Edge2 = BRepBuilderAPI_MakeEdge(circle,0,PI); \n\
3005 ExistingWire = BRepBuilderAPI_MakeWire(Edge2); \n\
3007 Edge3 = BRepBuilderAPI_MakeEdge(gp_Pnt(0,0,-80),gp_Pnt(90,20,30)); \n\
3009 BRepBuilderAPI_MakeWire MW1(ExistingWire,Edge3); \n\
3010 if (MW1.IsDone()) { \n\
3011 YellowWire = MW1; \n\
3014 ///the white wire is built with an existing wire and 3 edges. \n\
3015 ///we use the methods Add, Edge and Vertex from BRepBuilderAPI_MakeWire \n\
3016 ///in order to display the last edge and the last vertices we \n\
3017 ///add to the wire. \n\
3019 gp_Circ circle2(gp_Ax2(gp_Pnt(0,0,0),gp_Dir(0,1,0)),200); \n\
3020 Edge4 = BRepBuilderAPI_MakeEdge(circle2,0,PI); \n\
3022 ExistingWire2 = BRepBuilderAPI_MakeWire(Edge4); \n\
3024 gp_Pnt P1(0,0,-200); \n\
3025 gp_Pnt P2(5,204,0); \n\
3026 Edge5 = BRepBuilderAPI_MakeEdge(P1,P2); \n\
3028 gp_Pnt P3(-15,20,15); \n\
3029 Edge6 = BRepBuilderAPI_MakeEdge(P2,P3); \n\
3030 gp_Pnt P4(15,20,0); \n\
3031 Edge7 = BRepBuilderAPI_MakeEdge(P3,P4); \n\
3033 BRepBuilderAPI_MakeWire MW; \n\
3034 MW.Add(ExistingWire2); \n\
3039 if (MW.IsDone()) { \n\
3040 WhiteWire = MW.Wire(); \n\
3041 LastEdge = MW.Edge(); \n\
3042 LastVertex = MW.Vertex(); \n\
3047 PocessTextInDialog("Make wire ", Message);
3050 void CModelingDoc::OnFace()
3052 AIS_ListOfInteractive aList;
3053 myAISContext->DisplayedObjects(aList);
3054 AIS_ListIteratorOfListOfInteractive aListIterator;
3055 for(aListIterator.Initialize(aList);aListIterator.More();aListIterator.Next()){
3056 myAISContext->Remove (aListIterator.Value(), Standard_False);
3061 TopoDS_Face WhiteFace, BrownFace, RedFace, PinkFace;
3062 TopoDS_Edge Edge1, Edge2, Edge3, Edge4, Edge5, Edge6, Edge7;
3064 gp_Pnt P1, P2, P3, P4, P5, P6, P7;
3066 gp_Sphere sphere (gp_Ax3(gp_Pnt(0,0,0),gp_Dir(1,0,0)),150);
3068 WhiteFace = BRepBuilderAPI_MakeFace(sphere,0.1,0.7,0.2,0.9);
3070 //////////////////////////////////
3072 P1.SetCoord(-15,200,10);
3073 P2.SetCoord(5,204,0);
3074 P3.SetCoord(15,200,0);
3075 P4.SetCoord(-15,20,15);
3076 P5.SetCoord(-5,20,0);
3077 P6.SetCoord(15,20,35);
3078 TColgp_Array2OfPnt array(1,3,1,2);
3079 array.SetValue(1,1,P1);
3080 array.SetValue(2,1,P2);
3081 array.SetValue(3,1,P3);
3082 array.SetValue(1,2,P4);
3083 array.SetValue(2,2,P5);
3084 array.SetValue(3,2,P6);
3085 Handle (Geom_BSplineSurface) curve = GeomAPI_PointsToBSplineSurface(array,3,8,GeomAbs_C2,0.001);
3087 RedFace = BRepBuilderAPI_MakeFace(curve, Precision::Confusion());
3089 ////////////////////
3091 gp_Circ circle(gp_Ax2(gp_Pnt(0,0,0),gp_Dir(1,0,0)),80);
3092 Edge1 = BRepBuilderAPI_MakeEdge(circle,0,M_PI);
3094 Edge2 = BRepBuilderAPI_MakeEdge(gp_Pnt(0,0,-80),gp_Pnt(0,-10,40));
3095 Edge3 = BRepBuilderAPI_MakeEdge(gp_Pnt(0,-10,40),gp_Pnt(0,0,80));
3097 TopoDS_Wire YellowWire;
3098 BRepBuilderAPI_MakeWire MW1(Edge1,Edge2,Edge3);
3103 BrownFace = BRepBuilderAPI_MakeFace(YellowWire);
3108 P1.SetCoord(35,-200,40);
3109 P2.SetCoord(50,-204,30);
3110 P3.SetCoord(65,-200,30);
3111 P4.SetCoord(35,-20,45);
3112 P5.SetCoord(45,-20,30);
3113 P6.SetCoord(65,-20,65);
3114 TColgp_Array2OfPnt array2(1,3,1,2);
3115 array2.SetValue(1,1,P1);
3116 array2.SetValue(2,1,P2);
3117 array2.SetValue(3,1,P3);
3118 array2.SetValue(1,2,P4);
3119 array2.SetValue(2,2,P5);
3120 array2.SetValue(3,2,P6);
3122 Handle (Geom_BSplineSurface) BSplineSurf = GeomAPI_PointsToBSplineSurface(array2,3,8,GeomAbs_C2,0.001);
3124 TopoDS_Face aFace = BRepBuilderAPI_MakeFace(BSplineSurf, Precision::Confusion());
3127 gp_Pnt2d P12d(0.9,0.1);
3128 gp_Pnt2d P22d(0.2,0.7);
3129 gp_Pnt2d P32d(0.02,0.1);
3131 Handle (Geom2d_Line) line1 = new Geom2d_Line(P12d,gp_Dir2d((0.2-0.9),(0.7-0.1)));
3132 Handle (Geom2d_Line) line2 = new Geom2d_Line(P22d,gp_Dir2d((0.02-0.2),(0.1-0.7)));
3133 Handle (Geom2d_Line) line3 = new Geom2d_Line(P32d,gp_Dir2d((0.9-0.02),(0.1-0.1)));
3136 //Edges are on the BSpline surface
3137 Edge1 = BRepBuilderAPI_MakeEdge(line1,BSplineSurf,0,P12d.Distance(P22d));
3138 Edge2 = BRepBuilderAPI_MakeEdge(line2,BSplineSurf,0,P22d.Distance(P32d));
3139 Edge3 = BRepBuilderAPI_MakeEdge(line3,BSplineSurf,0,P32d.Distance(P12d));
3141 Wire1 = BRepBuilderAPI_MakeWire(Edge1,Edge2,Edge3);
3143 PinkFace = BRepBuilderAPI_MakeFace(aFace,Wire1);
3144 BRepLib::BuildCurves3d(PinkFace);
3146 /////////////Display
3147 Handle(AIS_Shape) white = new AIS_Shape(WhiteFace);
3148 myAISContext->SetColor(white,Quantity_NOC_WHITE,Standard_False);
3149 myAISContext->SetMaterial(white,Graphic3d_NOM_PLASTIC,Standard_False);
3150 myAISContext->Display(white,Standard_False);
3152 Handle(AIS_Shape) red = new AIS_Shape(RedFace);
3153 myAISContext->SetColor(red,Quantity_NOC_RED,Standard_False);
3154 myAISContext->SetMaterial(red,Graphic3d_NOM_PLASTIC,Standard_False);
3155 myAISContext->Display(red,Standard_False);
3157 Handle(AIS_Shape) brown = new AIS_Shape(BrownFace);
3158 myAISContext->SetColor(brown,Quantity_NOC_BROWN,Standard_False);
3159 myAISContext->SetMaterial(brown,Graphic3d_NOM_PLASTIC,Standard_False);
3160 myAISContext->Display(brown,Standard_False);
3162 Handle(AIS_Shape) pink = new AIS_Shape(PinkFace);
3163 myAISContext->SetColor(pink,Quantity_NOC_HOTPINK,Standard_False);
3164 myAISContext->SetMaterial(pink,Graphic3d_NOM_PLASTIC,Standard_False);
3165 myAISContext->Display(pink,Standard_False);
3170 TCollection_AsciiString Message ("\
3172 TopoDS_Face WhiteFace, BrownFace, RedFace, PinkFace; \n\
3173 TopoDS_Edge Edge1, Edge2, Edge3, Edge4, Edge5, Edge6, Edge7; \n\
3174 TopoDS_Wire Wire1; \n\
3175 gp_Pnt P1, P2, P3, P4, P5, P6, P7; \n\
3177 ////////The white Face \n\
3179 gp_Sphere sphere (gp_Ax3(gp_Pnt(0,0,0),gp_Dir(1,0,0)),150); \n\
3181 WhiteFace = BRepBuilderAPI_MakeFace(sphere,0.1,0.7,0.2,0.9); \n\
3183 ////////The red face \n\
3185 P1.SetCoord(-15,200,10); \n\
3186 P2.SetCoord(5,204,0); \n\
3187 P3.SetCoord(15,200,0); \n\
3188 P4.SetCoord(-15,20,15); \n\
3189 P5.SetCoord(-5,20,0); \n\
3190 P6.SetCoord(15,20,35); \n\
3191 TColgp_Array2OfPnt array(1,3,1,2); \n\
3192 array.SetValue(1,1,P1); \n\
3193 array.SetValue(2,1,P2); \n\
3194 array.SetValue(3,1,P3); \n\
3195 array.SetValue(1,2,P4); \n\
3196 array.SetValue(2,2,P5); \n\
3197 array.SetValue(3,2,P6); \n\
3198 Handle (Geom_BSplineSurface) curve = GeomAPI_PointsToBSplineSurface(array,3,8,GeomAbs_C2,0.001); \n\
3200 RedFace = BRepBuilderAPI_MakeFace(curve); \n\
3202 ////////The brown face \n\
3204 gp_Circ circle(gp_Ax2(gp_Pnt(0,0,0),gp_Dir(1,0,0)),80); \n\
3205 Edge1 = BRepBuilderAPI_MakeEdge(circle,0,PI); \n\
3207 Edge2 = BRepBuilderAPI_MakeEdge(gp_Pnt(0,0,-80),gp_Pnt(0,-10,40)); \n\
3208 Edge3 = BRepBuilderAPI_MakeEdge(gp_Pnt(0,-10,40),gp_Pnt(0,0,80)); \n\
3210 TopoDS_Wire YellowWire; \n\
3211 BRepBuilderAPI_MakeWire MW1(Edge1,Edge2,Edge3); \n\
3212 if (MW1.IsDone()) { \n\
3213 YellowWire = MW1; \n\
3216 BrownFace = BRepBuilderAPI_MakeFace(YellowWire); \n\
3219 ////////The pink face \n\
3221 P1.SetCoord(35,-200,40); \n\
3222 P2.SetCoord(50,-204,30); \n\
3223 P3.SetCoord(65,-200,30); \n\
3224 P4.SetCoord(35,-20,45); \n\
3225 P5.SetCoord(45,-20,30); \n\
3226 P6.SetCoord(65,-20,65); \n\
3227 TColgp_Array2OfPnt array2(1,3,1,2); \n\
3228 array2.SetValue(1,1,P1); \n\
3229 array2.SetValue(2,1,P2); \n\
3230 array2.SetValue(3,1,P3); \n\
3231 array2.SetValue(1,2,P4); \n\
3232 array2.SetValue(2,2,P5); \n\
3233 array2.SetValue(3,2,P6); \n\
3235 Handle (Geom_BSplineSurface) BSplineSurf = GeomAPI_PointsToBSplineSurface(array2,3,8,GeomAbs_C2,0.001); \n\
3237 TopoDS_Face aFace = BRepBuilderAPI_MakeFace(BSplineSurf); \n\
3240 gp_Pnt2d P12d(0.9,0.1); \n\
3241 gp_Pnt2d P22d(0.2,0.7); \n\
3242 gp_Pnt2d P32d(0.02,0.1); \n\
3244 Handle (Geom2d_Line) line1= \n\
3245 new Geom2d_Line(P12d,gp_Dir2d((0.2-0.9),(0.7-0.1))); \n\
3246 Handle (Geom2d_Line) line2= \n\
3247 new Geom2d_Line(P22d,gp_Dir2d((0.02-0.2),(0.1-0.7))); \n\
3248 Handle (Geom2d_Line) line3= \n\
3249 new Geom2d_Line(P32d,gp_Dir2d((0.9-0.02),(0.1-0.1))); \n\
3251 //Edges are on the BSpline surface \n\
3252 Edge1 = BRepBuilderAPI_MakeEdge(line1,BSplineSurf,0,P12d.Distance(P22d)); \n\
3253 Edge2 = BRepBuilderAPI_MakeEdge(line2,BSplineSurf,0,P22d.Distance(P32d)); \n\
3254 Edge3 = BRepBuilderAPI_MakeEdge(line3,BSplineSurf,0,P32d.Distance(P12d)); \n\
3256 Wire1 = BRepBuilderAPI_MakeWire(Edge1,Edge2,Edge3); \n\
3257 Wire1.Reverse(); \n\
3258 PinkFace = BRepBuilderAPI_MakeFace(aFace,Wire1); \n\
3259 BRepLib::BuildCurves3d(PinkFace); \n\
3263 PocessTextInDialog("Make face ", Message);
3266 void CModelingDoc::OnShell()
3268 AIS_ListOfInteractive aList;
3269 myAISContext->DisplayedObjects(aList);
3270 AIS_ListIteratorOfListOfInteractive aListIterator;
3271 for(aListIterator.Initialize(aList);aListIterator.More();aListIterator.Next()){
3272 myAISContext->Remove (aListIterator.Value(), Standard_False);
3275 TColgp_Array2OfPnt Poles(1,2,1,4);
3276 Poles.SetValue(1,1,gp_Pnt(0,0,0));
3277 Poles.SetValue(1,2,gp_Pnt(0,10,2));
3278 Poles.SetValue(1,3,gp_Pnt(0,20,10));
3279 Poles.SetValue(1,4,gp_Pnt(0,30,0));
3280 Poles.SetValue(2,1,gp_Pnt(10,0,5));
3281 Poles.SetValue(2,2,gp_Pnt(10,10,3));
3282 Poles.SetValue(2,3,gp_Pnt(10,20,20));
3283 Poles.SetValue(2,4,gp_Pnt(10,30,0));
3285 TColStd_Array1OfReal UKnots(1,2);
3286 UKnots.SetValue(1,0);
3287 UKnots.SetValue(2,1);
3289 TColStd_Array1OfInteger UMults(1,2);
3290 UMults.SetValue(1,2);
3291 UMults.SetValue(2,2);
3293 TColStd_Array1OfReal VKnots(1,3);
3294 VKnots.SetValue(1,0);
3295 VKnots.SetValue(2,1);
3296 VKnots.SetValue(3,2);
3298 TColStd_Array1OfInteger VMults(1,3);
3299 VMults.SetValue(1,3);
3300 VMults.SetValue(2,1);
3301 VMults.SetValue(3,3);
3303 Standard_Integer UDegree(1);
3304 Standard_Integer VDegree(2);
3306 Handle (Geom_BSplineSurface) BSpline = new Geom_BSplineSurface(Poles,UKnots,VKnots,UMults,VMults,UDegree,VDegree);
3308 TopoDS_Face WhiteFace = BRepBuilderAPI_MakeFace(BSpline, Precision::Confusion());
3311 Handle(AIS_Shape) white = new AIS_Shape(WhiteFace);
3312 myAISContext->SetColor (white, Quantity_NOC_WHITE, Standard_False);
3313 myAISContext->SetMaterial(white,Graphic3d_NOM_PLASTIC,Standard_False);
3314 myAISContext->SetTransparency (white, 0.7, Standard_False);
3315 myAISContext->Display(white,Standard_False);
3318 TopoDS_Shell aShell = BRepBuilderAPI_MakeShell(BSpline);
3319 Handle(AIS_Shape) anAISShell = new AIS_Shape(aShell);
3320 myAISContext->SetDisplayMode (anAISShell, 0, Standard_False);
3321 myAISContext->Display(anAISShell,Standard_False);
3322 //myAISContext->SetSelected(anAISShell);
3326 TCollection_AsciiString Message ("\
3328 TColgp_Array2OfPnt Poles(1,2,1,4); \n\
3329 Poles.SetValue(1,1,gp_Pnt(0,0,0)); \n\
3330 Poles.SetValue(1,2,gp_Pnt(0,10,2)); \n\
3331 Poles.SetValue(1,3,gp_Pnt(0,20,10)); \n\
3332 Poles.SetValue(1,4,gp_Pnt(0,30,0)); \n\
3333 Poles.SetValue(2,1,gp_Pnt(10,0,5)); \n\
3334 Poles.SetValue(2,2,gp_Pnt(10,10,3)); \n\
3335 Poles.SetValue(2,3,gp_Pnt(10,20,20)); \n\
3336 Poles.SetValue(2,4,gp_Pnt(10,30,0)); \n\
3338 TColStd_Array1OfReal UKnots(1,2); \n\
3339 UKnots.SetValue(1,0); \n\
3340 UKnots.SetValue(2,1); \n\
3342 TColStd_Array1OfInteger UMults(1,2); \n\
3343 UMults.SetValue(1,2); \n\
3344 UMults.SetValue(2,2); \n\
3346 TColStd_Array1OfReal VKnots(1,3); \n\
3347 VKnots.SetValue(1,0); \n\
3348 VKnots.SetValue(2,1); \n\
3349 VKnots.SetValue(3,2); \n\
3351 TColStd_Array1OfInteger VMults(1,3); \n\
3352 VMults.SetValue(1,3); \n\
3353 VMults.SetValue(2,1); \n\
3354 VMults.SetValue(3,3); \n\
3356 Standard_Integer UDegree(1); \n\
3357 Standard_Integer VDegree(2); \n\
3359 Handle (Geom_BSplineSurface) BSpline = new Geom_BSplineSurface(Poles,UKnots,VKnots,UMults,VMults,UDegree,VDegree); \n\
3361 TopoDS_Shell aShell = BRepBuilderAPI_MakeShell(BSpline); \n\
3365 PocessTextInDialog("Make shell", Message);
3369 void CModelingDoc::OnCompound()
3371 AIS_ListOfInteractive aList;
3372 myAISContext->DisplayedObjects(aList);
3373 AIS_ListIteratorOfListOfInteractive aListIterator;
3374 for(aListIterator.Initialize(aList);aListIterator.More();aListIterator.Next()){
3375 myAISContext->Remove (aListIterator.Value(), Standard_False);
3378 BRep_Builder builder;
3379 TopoDS_Compound Comp;
3380 builder.MakeCompound(Comp);
3382 TopoDS_Vertex aVertex = BRepBuilderAPI_MakeVertex(gp_Pnt(-20,10,-30));
3383 builder.Add(Comp,aVertex);
3385 gp_Lin line(gp_Ax1(gp_Pnt(10,10,10),gp_Dir(1,0,0)));
3386 TopoDS_Edge anEdge = BRepBuilderAPI_MakeEdge(line,-20,10);
3387 builder.Add(Comp,anEdge);
3389 gp_Sphere sphere (gp_Ax3(gp_Pnt(-80,0,0),gp_Dir(1,0,0)),150);
3390 TopoDS_Face aFace = BRepBuilderAPI_MakeFace(sphere,0.1,0.7,0.2,0.9);
3391 builder.Add(Comp,aFace);
3393 TopoDS_Shape aBox = BRepPrimAPI_MakeBox(gp_Pnt(-60, 0, 0), 30, 60, 40).Shape();
3394 builder.Add(Comp,aBox);
3396 Handle(AIS_Shape) white = new AIS_Shape(Comp);
3397 myAISContext->SetDisplayMode (white, 0, Standard_False);
3398 myAISContext->Display(white,Standard_False);
3403 TCollection_AsciiString Message ("\
3405 BRep_Builder builder; \n\
3406 TopoDS_Compound Comp; \n\
3407 builder.MakeCompound(Comp); \n\
3409 TopoDS_Vertex aVertex = BRepBuilderAPI_MakeVertex(gp_Pnt(-20,10,-30)); \n\
3410 builder.Add(Comp,aVertex); \n\
3412 gp_Lin line(gp_Ax1(gp_Pnt(10,10,10),gp_Dir(1,0,0))); \n\
3413 TopoDS_Edge anEdge = BRepBuilderAPI_MakeEdge(line,-20,10); \n\
3414 builder.Add(Comp,anEdge); \n\
3416 gp_Sphere sphere (gp_Ax3(gp_Pnt(-80,0,0),gp_Dir(1,0,0)),150); \n\
3417 TopoDS_Face aFace = BRepBuilderAPI_MakeFace(sphere,0.1,0.7,0.2,0.9); \n\
3418 builder.Add(Comp,aFace); \n\
3420 TopoDS_Shape aBox = BRepPrimAPI_MakeBox(gp_Pnt(-60,0,0),30,60,40); \n\
3421 builder.Add(Comp,aBox); \n\
3425 PocessTextInDialog("Make compound ", Message);
3433 void CModelingDoc::OnSewing()
3435 AIS_ListOfInteractive aList;
3436 myAISContext->DisplayedObjects(aList);
3437 AIS_ListIteratorOfListOfInteractive aListIterator;
3438 for(aListIterator.Initialize(aList);aListIterator.More();aListIterator.Next()){
3439 myAISContext->Remove (aListIterator.Value(), Standard_False);
3444 Handle(Geom_Plane) Pi=new Geom_Plane(P,V);
3445 Handle(Geom_RectangularTrimmedSurface) GeometricSurface=new Geom_RectangularTrimmedSurface(Pi,0.,100.,0.,100.);
3446 TopoDS_Shape FirstShape = BRepBuilderAPI_MakeFace(GeometricSurface, Precision::Confusion());
3448 Handle(AIS_Shape) white1 = new AIS_Shape(FirstShape);
3450 myAISContext->SetColor(white1,Quantity_NOC_RED,Standard_False);
3451 myAISContext->SetMaterial(white1,Graphic3d_NOM_PLASTIC,Standard_False);
3452 myAISContext->SetTransparency(white1,0.4,Standard_False);
3453 myAISContext->Display(white1,Standard_False);
3459 gp_Pnt P4(25,12,85);
3460 gp_Pnt P5(100,0,80);
3461 gp_Pnt P6(135,-12,85);
3463 TColgp_Array2OfPnt Array(1,3,1,2);
3464 Array.SetValue(1,1,P1);
3465 Array.SetValue(2,1,P2);
3466 Array.SetValue(3,1,P3);
3467 Array.SetValue(1,2,P4);
3468 Array.SetValue(2,2,P5);
3469 Array.SetValue(3,2,P6);
3471 Handle (Geom_BSplineSurface) aSurf = GeomAPI_PointsToBSplineSurface(Array,3,8,GeomAbs_C2,0.00001);
3472 TopoDS_Shape SecondShape = BRepBuilderAPI_MakeFace(aSurf, Precision::Confusion());
3474 Handle(AIS_Shape) white2 = new AIS_Shape(SecondShape);
3476 myAISContext->SetColor(white2,Quantity_NOC_YELLOW,Standard_False);
3477 myAISContext->SetMaterial(white2,Graphic3d_NOM_PLASTIC,Standard_False);
3478 myAISContext->SetTransparency(white2,0.4,Standard_False);
3479 myAISContext->Display(white2,Standard_False);
3483 BRepOffsetAPI_Sewing aMethod;
3484 aMethod.Add(FirstShape);
3485 aMethod.Add(SecondShape);
3489 TopoDS_Shape sewedShape = aMethod.SewedShape();
3491 Handle(AIS_Shape) result = new AIS_Shape(sewedShape);
3492 myAISContext->SetDisplayMode(result,0,Standard_False);
3493 myAISContext->Display(result,Standard_False);
3497 TCollection_AsciiString Message ("\
3499 ///////The first shape \n\
3501 gp_Pnt P(0,0,0); \n\
3502 gp_Vec V(0,0,1); \n\
3503 Handle(Geom_Plane) Pi=new Geom_Plane(P,V); \n\
3504 Handle(Geom_RectangularTrimmedSurface) GeometricSurface=new Geom_RectangularTrimmedSurface(Pi,0.,100.,0.,100.); \n\
3505 TopoDS_Shape FirstShape = BRepBuilderAPI_MakeFace(GeometricSurface); \n\
3507 ///////The second shape \n\
3509 gp_Pnt P1(0,0,0); \n\
3510 gp_Pnt P2(50,0,0); \n\
3511 gp_Pnt P3(100,0,0); \n\
3512 gp_Pnt P4(25,12,85); \n\
3513 gp_Pnt P5(100,0,80); \n\
3514 gp_Pnt P6(135,-12,85); \n\
3516 TColgp_Array2OfPnt Array(1,3,1,2); \n\
3517 Array.SetValue(1,1,P1); \n\
3518 Array.SetValue(2,1,P2); \n\
3519 Array.SetValue(3,1,P3); \n\
3520 Array.SetValue(1,2,P4); \n\
3521 Array.SetValue(2,2,P5); \n\
3522 Array.SetValue(3,2,P6); \n\
3524 Handle (Geom_BSplineSurface) aSurf = GeomAPI_PointsToBSplineSurface(Array,3,8,GeomAbs_C2,0.00001); \n\
3525 TopoDS_Shape SecondShape = BRepBuilderAPI_MakeFace(aSurf); \n\
3527 BRepOffsetAPI_Sewing aMethod; \n\
3528 aMethod.Add(FirstShape); \n\
3529 aMethod.Add(SecondShape); \n\
3531 aMethod.Perform(); \n\
3533 TopoDS_Shape sewedShape = aMethod.SewedShape(); \n\
3537 PocessTextInDialog("Sew faces ", Message);
3547 void CModelingDoc::OnBuilder()
3549 AIS_ListOfInteractive aList;
3550 myAISContext->DisplayedObjects(aList);
3551 AIS_ListIteratorOfListOfInteractive aListIterator;
3552 for(aListIterator.Initialize(aList);aListIterator.More();aListIterator.Next()){
3553 myAISContext->Remove (aListIterator.Value(), Standard_False);
3556 //The tolerance is the tolerance of confusion
3557 Standard_Real precision = Precision::Confusion();
3562 //Build the vertices
3563 TopoDS_Vertex V000, V001, V010, V011, V100, V101, V110, V111;
3564 B.MakeVertex(V000,gp_Pnt(0,0,0),precision);
3565 B.MakeVertex(V001,gp_Pnt(0,0,100),precision);
3566 B.MakeVertex(V010,gp_Pnt(0,150,0),precision);
3567 B.MakeVertex(V011,gp_Pnt(0,150,100),precision);
3568 B.MakeVertex(V100,gp_Pnt(200,0,0),precision);
3569 B.MakeVertex(V101,gp_Pnt(200,0,100),precision);
3570 B.MakeVertex(V110,gp_Pnt(200,150,0),precision);
3571 B.MakeVertex(V111,gp_Pnt(200,150,100),precision);
3574 //the edges are oriented as the axis X,Y,Z
3575 TopoDS_Edge EX00, EX01, EX10, EX11;
3576 TopoDS_Edge EY00, EY01, EY10, EY11;
3577 TopoDS_Edge EZ00, EZ01, EZ10, EZ11;
3578 Handle (Geom_Line) L;
3581 L = new Geom_Line(gp_Pnt(0,0,0),gp_Dir(1,0,0));
3582 B.MakeEdge(EX00,L,precision);
3583 V000.Orientation(TopAbs_FORWARD);
3584 V100.Orientation(TopAbs_REVERSED);
3588 B.UpdateVertex(V000,0,EX00,precision);
3589 B.UpdateVertex(V100,200,EX00,precision);
3592 L = new Geom_Line(gp_Pnt(0,150,0),gp_Dir(1,0,0));
3593 B.MakeEdge(EX10,L,precision);
3594 V010.Orientation(TopAbs_FORWARD);
3595 V110.Orientation(TopAbs_REVERSED);
3599 B.UpdateVertex(V010,0,EX10,precision);
3600 B.UpdateVertex(V110,200,EX10,precision);
3603 L = new Geom_Line(gp_Pnt(0,0,0),gp_Dir(0,1,0));
3604 B.MakeEdge(EY00,L,precision);
3605 V000.Orientation(TopAbs_FORWARD);
3606 V010.Orientation(TopAbs_REVERSED);
3610 B.UpdateVertex(V000,0,EY00,precision);
3611 B.UpdateVertex(V010,150,EY00,precision);
3614 L = new Geom_Line(gp_Pnt(200,0,0),gp_Dir(0,1,0));
3615 B.MakeEdge(EY10,L,precision);
3616 V100.Orientation(TopAbs_FORWARD);
3617 V110.Orientation(TopAbs_REVERSED);
3621 B.UpdateVertex(V100,0,EY10,precision);
3622 B.UpdateVertex(V110,150,EY10,precision);
3625 L = new Geom_Line(gp_Pnt(0,0,100),gp_Dir(0,1,0));
3626 B.MakeEdge(EY01,L,precision);
3627 V001.Orientation(TopAbs_FORWARD);
3628 V011.Orientation(TopAbs_REVERSED);
3632 B.UpdateVertex(V001,0,EY01,precision);
3633 B.UpdateVertex(V011,150,EY01,precision);
3636 L = new Geom_Line(gp_Pnt(200,0,100),gp_Dir(0,1,0));
3637 B.MakeEdge(EY11,L,precision);
3638 V101.Orientation(TopAbs_FORWARD);
3639 V111.Orientation(TopAbs_REVERSED);
3643 B.UpdateVertex(V101,0,EY11,precision);
3644 B.UpdateVertex(V111,150,EY11,precision);
3647 L = new Geom_Line(gp_Pnt(0,0,0),gp_Dir(0,0,1));
3648 B.MakeEdge(EZ00,L,precision);
3649 V000.Orientation(TopAbs_FORWARD);
3650 V001.Orientation(TopAbs_REVERSED);
3654 B.UpdateVertex(V000,0,EZ00,precision);
3655 B.UpdateVertex(V001,100,EZ00,precision);
3658 L = new Geom_Line(gp_Pnt(0,150,0),gp_Dir(0,0,1));
3659 B.MakeEdge(EZ01,L,precision);
3660 V010.Orientation(TopAbs_FORWARD);
3661 V011.Orientation(TopAbs_REVERSED);
3665 B.UpdateVertex(V010,0,EZ01,precision);
3666 B.UpdateVertex(V011,100,EZ01,precision);
3669 L = new Geom_Line(gp_Pnt(200,0,0),gp_Dir(0,0,1));
3670 B.MakeEdge(EZ10,L,precision);
3671 V100.Orientation(TopAbs_FORWARD);
3672 V101.Orientation(TopAbs_REVERSED);
3676 B.UpdateVertex(V100,0,EZ10,precision);
3677 B.UpdateVertex(V101,100,EZ10,precision);
3680 L = new Geom_Line(gp_Pnt(200,150,0),gp_Dir(0,0,1));
3681 B.MakeEdge(EZ11,L,precision);
3682 V110.Orientation(TopAbs_FORWARD);
3683 V111.Orientation(TopAbs_REVERSED);
3687 B.UpdateVertex(V110,0,EZ11,precision);
3688 B.UpdateVertex(V111,100,EZ11,precision);
3692 Handle (Geom_Circle) C;
3693 //Standard_Real R = 100;
3696 C = new Geom_Circle(gp_Ax2(gp_Pnt(100,0,100),gp_Dir(0,1,0),gp_Dir(-1,0,0)),100);
3697 B.MakeEdge(EX01,C,precision);
3698 V001.Orientation(TopAbs_FORWARD);
3699 V101.Orientation(TopAbs_REVERSED);
3703 B.UpdateVertex(V001,0,EX01,precision);
3704 B.UpdateVertex(V101,M_PI,EX01,precision);
3707 C = new Geom_Circle(gp_Ax2(gp_Pnt(100,150,100),gp_Dir(0,1,0),gp_Dir(-1,0,0)),100);
3708 B.MakeEdge(EX11,C,precision);
3709 V011.Orientation(TopAbs_FORWARD);
3710 V111.Orientation(TopAbs_REVERSED);
3714 B.UpdateVertex(V011,0,EX11,precision);
3715 B.UpdateVertex(V111,M_PI,EX11,precision);
3717 //Build wire and faces
3718 //Faces normals are along the axis X,Y,Z
3719 TopoDS_Face FXMIN, FXMAX, FYMIN, FYMAX, FZMIN, FZMAX;
3721 Handle (Geom_Plane) P;
3722 Handle (Geom2d_Line) L2d;
3723 Handle (Geom2d_Circle) C2d;
3724 Handle (Geom_CylindricalSurface) S;
3727 P = new Geom_Plane(gp_Ax2(gp_Pnt(200,0,0),gp_Dir(1,0,0),gp_Dir(0,1,0)));
3728 B.MakeFace(FXMAX,P,precision);
3729 //the wire and the edges
3732 EY10.Orientation(TopAbs_FORWARD);
3735 L2d = new Geom2d_Line(gp_Pnt2d(0,0),gp_Dir2d(1,0));
3736 B.UpdateEdge(EY10,L2d,FXMAX,precision);
3738 EZ11.Orientation(TopAbs_FORWARD);
3741 L2d = new Geom2d_Line(gp_Pnt2d(150,0),gp_Dir2d(0,1));
3742 B.UpdateEdge(EZ11,L2d,FXMAX,precision);
3744 EY11.Orientation(TopAbs_REVERSED);
3747 L2d = new Geom2d_Line(gp_Pnt2d(0,100),gp_Dir2d(1,0));
3748 B.UpdateEdge(EY11,L2d,FXMAX,precision);
3750 EZ10.Orientation(TopAbs_REVERSED);
3753 L2d = new Geom2d_Line(gp_Pnt2d(0,0),gp_Dir2d(0,1));
3754 B.UpdateEdge(EZ10,L2d,FXMAX,precision);
3759 P = new Geom_Plane(gp_Ax2(gp_Pnt(0,0,0),gp_Dir(-1,0,0),gp_Dir(0,0,1)));
3760 B.MakeFace(FXMIN,P,precision);
3761 //the wire and the edges
3764 EZ00.Orientation(TopAbs_FORWARD);
3767 L2d = new Geom2d_Line(gp_Pnt2d(0,0),gp_Dir2d(1,0));
3768 B.UpdateEdge(EZ00,L2d,FXMIN,precision);
3770 EY01.Orientation(TopAbs_FORWARD);
3773 L2d = new Geom2d_Line(gp_Pnt2d(100,0),gp_Dir2d(0,1));
3774 B.UpdateEdge(EY01,L2d,FXMIN,precision);
3776 EZ01.Orientation(TopAbs_REVERSED);
3779 L2d = new Geom2d_Line(gp_Pnt2d(0,150),gp_Dir2d(1,0));
3780 B.UpdateEdge(EZ01,L2d,FXMIN,precision);
3782 EY00.Orientation(TopAbs_REVERSED);
3785 L2d = new Geom2d_Line(gp_Pnt2d(0,0),gp_Dir2d(0,1));
3786 B.UpdateEdge(EY00,L2d,FXMIN,precision);
3793 P = new Geom_Plane(gp_Ax2(gp_Pnt(0,0,0),gp_Dir(0,1,0),gp_Dir(0,0,1)));
3794 B.MakeFace(FYMAX,P,precision);
3795 //the wire and the edges
3798 EZ00.Orientation(TopAbs_FORWARD);
3801 L2d = new Geom2d_Line(gp_Pnt2d(0,0),gp_Dir2d(1,0));
3802 B.UpdateEdge(EZ00,L2d,FYMAX,precision);
3804 EX01.Orientation(TopAbs_FORWARD);
3807 C2d = new Geom2d_Circle(gp_Ax2d(gp_Pnt2d(100,100),gp_Dir2d(0,-1)),100);
3808 B.UpdateEdge(EX01,C2d,FYMAX,precision);
3809 B.UpdateVertex(V001,0,EX01,FYMAX,precision);
3810 B.UpdateVertex(V101,M_PI,EX01,FYMAX,precision);
3812 EZ10.Orientation(TopAbs_REVERSED);
3815 L2d = new Geom2d_Line(gp_Pnt2d(0,200),gp_Dir2d(1,0));
3816 B.UpdateEdge(EZ10,L2d,FYMAX,precision);
3818 EX00.Orientation(TopAbs_REVERSED);
3821 L2d = new Geom2d_Line(gp_Pnt2d(0,0),gp_Dir2d(0,1));
3822 B.UpdateEdge(EX00,L2d,FYMAX,precision);
3830 P = new Geom_Plane(gp_Ax2(gp_Pnt(0,150,0),gp_Dir(0,1,0),gp_Dir(0,0,1)));
3831 B.MakeFace(FYMIN,P,precision);
3832 //the wire and the edges
3835 EZ01.Orientation(TopAbs_FORWARD);
3838 L2d = new Geom2d_Line(gp_Pnt2d(0,0),gp_Dir2d(1,0));
3839 B.UpdateEdge(EZ01,L2d,FYMIN,precision);
3841 EX11.Orientation(TopAbs_FORWARD);
3844 C2d = new Geom2d_Circle(gp_Ax2d(gp_Pnt2d(100,100),gp_Dir2d(0,-1)),100);
3845 B.UpdateEdge(EX11,C2d,FYMIN,precision);
3846 B.UpdateVertex(V011,0,EX11,FYMIN,precision);
3847 B.UpdateVertex(V111,M_PI,EX11,FYMIN,precision);
3849 EZ11.Orientation(TopAbs_REVERSED);
3852 L2d = new Geom2d_Line(gp_Pnt2d(0,200),gp_Dir2d(1,0));
3853 B.UpdateEdge(EZ11,L2d,FYMIN,precision);
3855 EX10.Orientation(TopAbs_REVERSED);
3858 L2d = new Geom2d_Line(gp_Pnt2d(0,0),gp_Dir2d(0,1));
3859 B.UpdateEdge(EX10,L2d,FYMIN,precision);
3864 P = new Geom_Plane(gp_Ax2(gp_Pnt(0,0,0),gp_Dir(0,0,-1),gp_Dir(0,1,0)));
3865 B.MakeFace(FZMAX,P,precision);
3866 //the wire and the edges
3869 EY00.Orientation(TopAbs_FORWARD);
3872 L2d = new Geom2d_Line(gp_Pnt2d(0,0),gp_Dir2d(1,0));
3873 B.UpdateEdge(EY00,L2d,FZMAX,precision);
3875 EX10.Orientation(TopAbs_FORWARD);
3878 L2d = new Geom2d_Line(gp_Pnt2d(150,0),gp_Dir2d(0,1));
3879 B.UpdateEdge(EX10,L2d,FZMAX,precision);
3881 EY10.Orientation(TopAbs_REVERSED);
3884 L2d = new Geom2d_Line(gp_Pnt2d(0,200),gp_Dir2d(1,0));
3885 B.UpdateEdge(EY10,L2d,FZMAX,precision);
3887 EX00.Orientation(TopAbs_REVERSED);
3890 L2d = new Geom2d_Line(gp_Pnt2d(0,0),gp_Dir2d(0,1));
3891 B.UpdateEdge(EX00,L2d,FZMAX,precision);
3897 S = new Geom_CylindricalSurface(gp_Ax3(gp_Pnt(100,0,100),gp_Dir(0,1,0),gp_Dir(-1,0,0)),100);
3898 B.MakeFace(FZMIN,S,precision);
3900 //the wire and the edges
3903 EX01.Orientation(TopAbs_FORWARD);
3906 L2d = new Geom2d_Line(gp_Ax2d(gp_Pnt2d(0,0),gp_Dir2d(1,0)));
3907 B.UpdateEdge(EX01,L2d,FZMIN,precision);
3908 B.UpdateVertex(V001,0,EX01,FZMIN,precision);
3909 B.UpdateVertex(V101,M_PI,EX01,FZMIN,precision);
3911 EY11.Orientation(TopAbs_FORWARD);
3914 L2d = new Geom2d_Line(gp_Pnt2d(M_PI,0),gp_Dir2d(0,1));
3915 B.UpdateEdge(EY11,L2d,FZMIN,precision);
3917 EX11.Orientation(TopAbs_REVERSED);
3920 L2d = new Geom2d_Line(gp_Ax2d(gp_Pnt2d(0,150),gp_Dir2d(1,0)));
3921 B.UpdateEdge(EX11,L2d,FZMIN,precision);
3922 B.UpdateVertex(V111,M_PI,EX11,FZMIN,precision);
3923 B.UpdateVertex(V011,0,EX11,FZMIN,precision);
3925 EY01.Orientation(TopAbs_REVERSED);
3928 L2d = new Geom2d_Line(gp_Pnt2d(0,0),gp_Dir2d(0,1));
3929 B.UpdateEdge(EY01,L2d,FZMIN,precision);
3933 FYMAX.Orientation(TopAbs_REVERSED);
3950 Handle(AIS_Shape) borne = new AIS_Shape(Sol);
3951 myAISContext->SetDisplayMode (borne, 1, Standard_False);
3952 myAISContext->SetColor (borne, Quantity_NOC_RED, Standard_False);
3953 myAISContext->SetMaterial(borne,Graphic3d_NOM_PLASTIC,Standard_False);
3954 myAISContext->Display(borne,Standard_False);
3958 TCollection_AsciiString Message ("\
3960 //The tolerance is 0.01 \n\
3961 Standard_Real precision(0.01); \n\
3966 //Build the vertices \n\
3967 TopoDS_Vertex V000, V001, V010, V011, V100, V101, V110, V111; \n\
3968 B.MakeVertex(V000,gp_Pnt(0,0,0),precision); \n\
3969 B.MakeVertex(V001,gp_Pnt(0,0,100),precision); \n\
3970 B.MakeVertex(V010,gp_Pnt(0,150,0),precision); \n\
3971 B.MakeVertex(V011,gp_Pnt(0,150,100),precision); \n\
3972 B.MakeVertex(V100,gp_Pnt(200,0,0),precision); \n\
3973 B.MakeVertex(V101,gp_Pnt(200,0,100),precision); \n\
3974 B.MakeVertex(V110,gp_Pnt(200,150,0),precision); \n\
3975 B.MakeVertex(V111,gp_Pnt(200,150,100),precision); \n\
3977 //Build the edges \n\
3978 //the edges are oriented as the axis X,Y,Z \n\
3979 TopoDS_Edge EX00, EX01, EX10, EX11; \n\
3980 TopoDS_Edge EY00, EY01, EY10, EY11; \n\
3981 TopoDS_Edge EZ00, EZ01, EZ10, EZ11; \n\
3982 Handle (Geom_Line) L; \n\
3985 L = new Geom_Line(gp_Pnt(0,0,0),gp_Dir(1,0,0)); \n\
3986 B.MakeEdge(EX00,L,precision); \n\
3987 V000.Orientation(TopAbs_FORWARD); \n\
3988 V100.Orientation(TopAbs_REVERSED); \n\
3989 B.Add(EX00,V000); \n\
3990 B.Add(EX00,V100); \n\
3992 B.UpdateVertex(V000,0,EX00,precision); \n\
3993 B.UpdateVertex(V100,200,EX00,precision); \n\
3995 //Idem for all the linear edges... \n\
3997 //Circular Edges \n\
3998 Handle (Geom_Circle) C; \n\
3999 Standard_Real R = 100; \n\
4002 C = new Geom_Circle(gp_Ax2(gp_Pnt(100,0,100),gp_Dir(0,1,0),gp_Dir(-1,0,0)),100); \n\
4003 B.MakeEdge(EX01,C,precision); \n\
4004 V001.Orientation(TopAbs_FORWARD); \n\
4005 V101.Orientation(TopAbs_REVERSED); \n\
4006 B.Add(EX01,V001); \n\
4007 B.Add(EX01,V101); \n\
4009 B.UpdateVertex(V001,0,EX01,precision); \n\
4010 B.UpdateVertex(V101,PI,EX01,precision); \n\
4014 //Build wire and faces \n\
4015 //Faces normals are along the axis X,Y,Z \n\
4016 TopoDS_Face FXMIN, FXMAX, FYMIN, FYMAX, FZMIN, FZMAX; \n\
4018 Handle (Geom_Plane) P; \n\
4019 Handle (Geom2d_Line) L2d; \n\
4020 Handle (Geom2d_Circle) C2d; \n\
4021 Handle (Geom_CylindricalSurface) S; \n\
4024 P = new Geom_Plane(gp_Ax2(gp_Pnt(200,0,0),gp_Dir(1,0,0),gp_Dir(0,1,0))); \n\
4025 B.MakeFace(FXMAX,P,precision); \n\
4026 //the wire and the edges \n\
4027 B.MakeWire (W); \n");
4030 EY10.Orientation(TopAbs_FORWARD); \n\
4033 L2d = new Geom2d_Line(gp_Pnt2d(0,0),gp_Dir2d(1,0)); \n\
4034 B.UpdateEdge(EY10,L2d,FXMAX,precision); \n\
4036 EZ11.Orientation(TopAbs_FORWARD); \n\
4039 L2d = new Geom2d_Line(gp_Pnt2d(150,0),gp_Dir2d(0,1)); \n\
4040 B.UpdateEdge(EZ11,L2d,FXMAX,precision); \n\
4042 EY11.Orientation(TopAbs_REVERSED); \n\
4045 L2d = new Geom2d_Line(gp_Pnt2d(0,100),gp_Dir2d(1,0)); \n\
4046 B.UpdateEdge(EY11,L2d,FXMAX,precision); \n\
4048 EZ10.Orientation(TopAbs_REVERSED); \n\
4051 L2d = new Geom2d_Line(gp_Pnt2d(0,0),gp_Dir2d(0,1)); \n\
4052 B.UpdateEdge(EZ10,L2d,FXMAX,precision); \n\
4056 //Idem for other faces... \n\
4059 TopoDS_Shell Sh; \n\
4060 B.MakeShell(Sh); \n\
4061 B.Add(Sh,FXMAX); \n\
4062 B.Add(Sh,FXMIN); \n\
4063 B.Add(Sh,FYMAX); \n\
4064 B.Add(Sh,FYMIN); \n\
4065 B.Add(Sh,FZMAX); \n\
4066 B.Add(Sh,FZMIN); \n\
4069 TopoDS_Solid Sol; \n\
4070 B.MakeSolid(Sol); \n\
4075 PocessTextInDialog("Make a shape with a builder", Message);
4079 void CModelingDoc::OnGeometrie()
4081 AIS_ListOfInteractive aList;
4082 myAISContext->DisplayedObjects(aList);
4083 AIS_ListIteratorOfListOfInteractive aListIterator;
4084 for(aListIterator.Initialize(aList);aListIterator.More();aListIterator.Next()){
4085 myAISContext->Remove (aListIterator.Value(), Standard_False);
4088 //geometry of a vertex
4089 TopoDS_Vertex aVertex = BRepBuilderAPI_MakeVertex(gp_Pnt(0,120,70));
4090 gp_Pnt GeometricPoint = BRep_Tool::Pnt(aVertex);
4092 Handle(AIS_Shape) vert = new AIS_Shape(aVertex);
4093 myAISContext->Display(vert,Standard_False);
4097 //geometry of an edge
4098 TopoDS_Edge anEdge = BRepBuilderAPI_MakeEdge(gp_Pnt(100,50,250),gp_Pnt(-30,-100,-50));
4099 Handle(AIS_Shape) yellow = new AIS_Shape(anEdge);
4100 myAISContext->SetWidth(yellow,2,Standard_False);
4101 myAISContext->Display(yellow,Standard_False);
4105 TopLoc_Location location;
4106 Standard_Real first, last;
4107 Handle (Geom_Curve) aCurve = BRep_Tool::Curve(anEdge,location,first,last);
4108 TopoDS_Edge anEdgeDS = BRepBuilderAPI_MakeEdge(aCurve);
4110 Handle (Geom_Line) aLine = Handle (Geom_Line)::DownCast(aCurve);
4111 if (!aLine.IsNull()) {
4112 Handle (AIS_Line) DispLine = new AIS_Line(aLine);
4113 myAISContext->Display(DispLine,Standard_False);
4118 //geometry of a face
4119 gp_Pnt P(-20,-20,-20);
4121 Handle(Geom_Plane) Pi=new Geom_Plane(P,V);
4122 Handle(Geom_RectangularTrimmedSurface) Surface=new Geom_RectangularTrimmedSurface(Pi,0.,100.,0.,100.);
4123 TopoDS_Face RedFace = BRepBuilderAPI_MakeFace(Surface, Precision::Confusion());
4125 Handle(AIS_Shape) red = new AIS_Shape(RedFace);
4126 myAISContext->SetColor(red,Quantity_NOC_RED,Standard_False);
4127 myAISContext->SetMaterial(red,Graphic3d_NOM_PLASTIC,Standard_False);
4128 myAISContext->Display(red,Standard_False);
4132 TopLoc_Location location2;
4133 Handle (Geom_Surface) aGeometricSurface = BRep_Tool::Surface(RedFace,location2);
4135 Handle (Geom_Plane) aPlane = Handle (Geom_Plane)::DownCast(aGeometricSurface);
4136 if (!aPlane.IsNull()) {
4137 Handle (AIS_Plane) DispPlane = new AIS_Plane(aPlane);
4138 myAISContext->Display(DispPlane,Standard_False);
4147 TCollection_AsciiString Message ("\
4149 ///////geometry of a vertex \n\
4150 TopoDS_Vertex aVertex = BRepBuilderAPI_MakeVertex(gp_Pnt(0,120,70)); \n\
4151 gp_Pnt GeometricPoint = BRep_Tool::Pnt(aVertex); \n\
4153 ///////geometry of an edge \n\
4154 TopoDS_Edge anEdge = BRepBuilderAPI_MakeEdge(gp_Pnt(100,50,250),gp_Pnt(-30,-100,-50)); \n\
4156 TopLoc_Location location; \n\
4157 Standard_Real first, last; \n\
4158 Handle (Geom_Curve) aCurve = BRep_Tool::Curve(anEdge,location,first,last); \n\
4159 TopoDS_Edge anEdgeDS = BRepBuilderAPI_MakeEdge(aCurve); \n\
4161 Handle (Geom_Line) aLine = Handle (Geom_Line)::DownCast(aCurve); \n\
4162 if (!aLine.IsNull()) { \n\
4163 Handle (AIS_Line) DispLine = new AIS_Line(aLine); \n\
4166 ///////geometry of a face \n\
4167 gp_Pnt P(-20,-20,-20); \n\
4168 gp_Vec V(0,0,1); \n\
4169 Handle(Geom_Plane) Pi=new Geom_Plane(P,V); \n\
4170 Handle(Geom_RectangularTrimmedSurface) Surface=new Geom_RectangularTrimmedSurface(Pi,0.,100.,0.,100.); \n\
4171 TopoDS_Face RedFace = BRepBuilderAPI_MakeFace(Surface); \n\
4173 TopLoc_Location location2; \n\
4174 Handle (Geom_Surface) aGeometricSurface = BRep_Tool::Surface(RedFace,location2); \n\
4176 Handle (Geom_Plane) aPlane = Handle (Geom_Plane)::DownCast(aGeometricSurface); \n\
4177 if (!aPlane.IsNull()) { \n\
4178 Handle (AIS_Plane) DispPlane = new AIS_Plane(aPlane); \n\
4183 PocessTextInDialog("Recover the geometry of vertex, edge and face ", Message);
4188 void CModelingDoc::OnExplorer()
4190 myAISContext->RemoveAll (false);
4192 TopoDS_Shape aBox = BRepPrimAPI_MakeBox(100, 100, 100).Shape();
4193 Standard_Integer j(8);
4194 Handle(AIS_ColoredShape) theBox = new AIS_ColoredShape(aBox);
4195 myAISContext->SetColor(theBox,Quantity_NOC_RED,Standard_False);
4196 myAISContext->SetMaterial(theBox,Graphic3d_NOM_PLASTIC,Standard_False);
4197 myAISContext->Display(theBox, AIS_Shaded, 0,Standard_False);
4201 for (TopExp_Explorer exp (aBox,TopAbs_FACE);exp.More();exp.Next())
4203 TopoDS_Face aCurrentFace = TopoDS::Face(exp.Current());
4205 Handle(AIS_ColoredDrawer) aSubFaceAspects = theBox->CustomAspects (aCurrentFace);
4206 aSubFaceAspects->SetShadingAspect (new Prs3d_ShadingAspect());
4207 *aSubFaceAspects->ShadingAspect()->Aspect() = *theBox->Attributes()->ShadingAspect()->Aspect();
4208 aSubFaceAspects->ShadingAspect()->Aspect()->ChangeFrontMaterial().SetTransparency (0.8f);
4209 myAISContext->Redisplay (theBox, false);
4212 //test the orientation of the current face
4213 TopAbs_Orientation orient = aCurrentFace.Orientation();
4215 //Recover the geometric plane
4216 TopLoc_Location location;
4217 Handle (Geom_Surface) aGeometricSurface = BRep_Tool::Surface(aCurrentFace,location);
4219 Handle (Geom_Plane) aPlane = Handle (Geom_Plane)::DownCast(aGeometricSurface);
4221 //Build an AIS_Shape with a new color
4222 Handle(AIS_Shape) theMovingFace = new AIS_Shape(aCurrentFace);
4223 Quantity_NameOfColor aCurrentColor = (Quantity_NameOfColor)j;
4224 myAISContext->SetColor(theMovingFace,aCurrentColor,Standard_False);
4225 myAISContext->SetMaterial(theMovingFace,Graphic3d_NOM_PLASTIC,Standard_False);
4226 //Find the normal vector of each face
4227 gp_Pln agpPlane = aPlane->Pln();
4228 gp_Ax1 norm = agpPlane.Axis();
4229 gp_Dir dir = norm.Direction();
4232 TopLoc_Location aLocation;
4233 Handle (AIS_ConnectedInteractive) theTransformedDisplay = new AIS_ConnectedInteractive();
4234 theTransformedDisplay->Connect(theMovingFace, aLocation);
4236 Handle (Geom_Transformation) theMove = new Geom_Transformation(aLocation.Transformation());
4237 myAISContext->Display(theTransformedDisplay,Standard_False);
4238 myAISContext->UpdateCurrentViewer();
4241 for (Standard_Integer i=1;i<=30;i++)
4243 theMove->SetTranslation(move*i);
4244 if (orient==TopAbs_FORWARD) myAISContext->SetLocation(theTransformedDisplay,TopLoc_Location(theMove->Trsf()));
4245 else myAISContext->SetLocation(theTransformedDisplay,TopLoc_Location(theMove->Inverted()->Trsf()));
4247 myAISContext->Redisplay(theTransformedDisplay,true);
4252 myAISContext->UpdateCurrentViewer();
4255 TCollection_AsciiString Message ("\
4257 TopoDS_Shape aBox = BRepPrimAPI_MakeBox(100,100,100); \n\
4259 for (TopExp_Explorer exp (aBox,TopAbs_FACE);exp.More();exp.Next()) { \n\
4260 TopoDS_Face aCurrentFace = TopoDS::Face(exp.Current()); \n\
4262 //Recover the geometric plane \n\
4263 TopLoc_Location location; \n\
4264 Handle (Geom_Surface) aGeometricSurface = BRep_Tool::Surface(aCurrentFace,location); \n\
4266 Handle (Geom_Plane) aPlane = Handle (Geom_Plane)::DownCast(aGeometricSurface); \n\
4269 PocessTextInDialog("Explode a shape in faces ", Message);
4273 /* =================================================================================
4274 ==================== A N A L Y S I S ========================================
4275 ================================================================================= */
4277 void CModelingDoc::OnValid()
4279 AIS_ListOfInteractive aList;
4280 myAISContext->DisplayedObjects(aList);
4281 AIS_ListIteratorOfListOfInteractive aListIterator;
4282 for(aListIterator.Initialize(aList);aListIterator.More();aListIterator.Next()){
4283 myAISContext->Remove (aListIterator.Value(), Standard_False);
4286 TopoDS_Shape S = BRepPrimAPI_MakeBox(200., 300., 150.).Shape();
4287 Handle(AIS_Shape) ais1 = new AIS_Shape(S);
4288 myAISContext->SetColor(ais1,Quantity_NOC_GREEN,Standard_False);
4289 myAISContext->SetMaterial(ais1,Graphic3d_NOM_PLASTIC,Standard_False);
4290 myAISContext->Display(ais1,Standard_False);
4293 TCollection_AsciiString Message ("\
4295 TopoDS_Shape S = BRepPrimI_MakeBox(200.,300.,150.);\n\
4296 Standard_Boolean theShapeIsValid = BRepAlgo::IsValid(S);\n\
4297 if ( theShapeIsValid )\n\
4299 MessageBox(\"The Shape Is Valid !! \",\"Checking Shape\");\n\
4303 MessageBox(\"The Shape Is NOT Valid !! \",\"Checking Shape\");\n\
4306 PocessTextInDialog("Check a shape", Message);
4308 Standard_Boolean theShapeIsValid = BRepAlgo::IsValid(S);
4309 MessageBoxW (AfxGetApp()->m_pMainWnd->m_hWnd, theShapeIsValid ? L"The Shape Is Valid !! " : L"The Shape Is NOT Valid !! ", L"Checking Shape", MB_OK);
4313 void CModelingDoc::OnLinear()
4315 AIS_ListOfInteractive aList;
4316 myAISContext->DisplayedObjects(aList);
4317 AIS_ListIteratorOfListOfInteractive aListIterator;
4318 for(aListIterator.Initialize(aList);aListIterator.More();aListIterator.Next()){
4319 myAISContext->Remove (aListIterator.Value(), Standard_False);
4323 TColgp_Array1OfPnt Points1(1,4);
4324 Points1.SetValue(1,gp_Pnt(0,0,0));
4325 Points1.SetValue(2,gp_Pnt(2,1,0));
4326 Points1.SetValue(3,gp_Pnt(4,0,0));
4327 Points1.SetValue(4,gp_Pnt(6,2,0));
4328 GeomAPI_PointsToBSpline PTBS1(Points1);
4329 Handle(Geom_BSplineCurve) BSC1 = PTBS1.Curve();
4330 TopoDS_Edge S = BRepBuilderAPI_MakeEdge(BSC1).Edge();
4332 Handle(AIS_Shape) ais1 = new AIS_Shape(S);
4333 myAISContext->SetColor(ais1,Quantity_NOC_GREEN,Standard_False);
4334 myAISContext->SetMaterial(ais1,Graphic3d_NOM_PLASTIC,Standard_False);
4335 myAISContext->Display(ais1,Standard_False);
4339 GProp_GProps System;
4340 BRepGProp::LinearProperties(S,System);
4341 gp_Pnt G = System.CentreOfMass ();
4342 Standard_Real Length = System.Mass();
4343 gp_Mat I = System.MatrixOfInertia();
4345 TCollection_ExtendedString string("Length Of all the Edges =");
4346 TCollection_ExtendedString string1(Length);
4349 string += "\nCenterOfMass : \n X=";
4360 string += "Matrix of Inertia :\n ";
4389 TCollection_AsciiString Message ("\
4391 TColgp_Array1OfPnt Points1(1,4);\n\
4392 Points1.SetValue(1,gp_Pnt(0,0,0));\n\
4393 Points1.SetValue(2,gp_Pnt(2,1,0));\n\
4394 Points1.SetValue(3,gp_Pnt(4,0,0));\n\
4395 Points1.SetValue(4,gp_Pnt(6,2,0));\n\
4396 GeomAPI_PointsToBSpline PTBS1(Points1);\n\
4397 Handle(Geom_BSplineCurve) BSC1 = PTBS1.Curve();\n\
4398 TopoDS_Shape S = BRepBuilderAPI_MakeEdge(BSC1).Edge();\n\
4399 GProp_GProps System;\n\
4400 BRepGProp::LinearProperties(S,System);\n\
4401 gp_Pnt G = System.CentreOfMass ();\n\
4402 Standard_Real Length = System.Mass();\n\
4403 gp_Mat I = System.MatrixOfInertia();\n\
4405 PocessTextInDialog("Linear Properties", Message);
4406 MessageBoxW (AfxGetApp()->m_pMainWnd->m_hWnd, string.ToWideString(), L"Linear Properties", MB_OK);
4409 void CModelingDoc::OnSurface()
4411 AIS_ListOfInteractive aList;
4412 myAISContext->DisplayedObjects(aList);
4413 AIS_ListIteratorOfListOfInteractive aListIterator;
4414 for(aListIterator.Initialize(aList);aListIterator.More();aListIterator.Next()){
4415 myAISContext->Remove (aListIterator.Value(), Standard_False);
4418 TColgp_Array1OfPnt Pnts1(1,3);
4419 TColgp_Array1OfPnt Pnts2(1,3);
4420 TColgp_Array1OfPnt Pnts3(1,3);
4421 TColgp_Array1OfPnt Pnts4(1,3);
4423 Pnts1(1) = gp_Pnt(0,0,0);
4424 Pnts1(2) = gp_Pnt(5,0,0);
4425 Pnts1(3) = gp_Pnt(10,10,0);
4427 Pnts2(1) = gp_Pnt(10,10,0);
4428 Pnts2(2) = gp_Pnt(5,12,4);
4429 Pnts2(3) = gp_Pnt(0,15,10);
4431 Pnts3(1) = gp_Pnt(0,15,10);
4432 Pnts3(2) = gp_Pnt(-12,10,11);
4433 Pnts3(3) = gp_Pnt(-10,5,13);
4435 Pnts4(1) = gp_Pnt(-10,5,13);
4436 Pnts4(2) = gp_Pnt(-2,-2,2);
4437 Pnts4(3) = gp_Pnt(0,0,0);
4439 GeomAPI_PointsToBSpline PTBS1(Pnts1);
4440 GeomAPI_PointsToBSpline PTBS2(Pnts2);
4441 GeomAPI_PointsToBSpline PTBS3(Pnts3);
4442 GeomAPI_PointsToBSpline PTBS4(Pnts4);
4443 Handle(Geom_BSplineCurve) C1 = PTBS1.Curve();
4444 Handle(Geom_BSplineCurve) C2 = PTBS2.Curve();
4445 Handle(Geom_BSplineCurve) C3 = PTBS3.Curve();
4446 Handle(Geom_BSplineCurve) C4 = PTBS4.Curve();
4448 GeomFill_BSplineCurves fill;
4449 fill.Init(C1,C2,C3,C4,GeomFill_CoonsStyle);
4450 Handle(Geom_BSplineSurface) BSS = fill.Surface();
4452 TopoDS_Shape S = BRepBuilderAPI_MakeFace(BSS, Precision::Confusion()).Face();
4454 Handle(AIS_Shape) ais1 = new AIS_Shape(S);
4455 myAISContext->SetColor(ais1,Quantity_NOC_GREEN,Standard_False);
4456 myAISContext->SetMaterial(ais1,Graphic3d_NOM_PLASTIC,Standard_False);
4457 myAISContext->Display(ais1,Standard_False);
4461 GProp_GProps System;
4462 BRepGProp::SurfaceProperties(S,System);
4463 gp_Pnt G = System.CentreOfMass ();
4464 Standard_Real Area = System.Mass();
4465 gp_Mat I = System.MatrixOfInertia();
4467 TCollection_ExtendedString string("Area Of the Face =");
4468 TCollection_ExtendedString string1(Area);
4471 string += "\nCenterOfMass : \n X=";
4482 string += "Matrix of Inertia :\n ";
4511 TCollection_AsciiString Message ("\
4513 TopoDS_Shape S = BRepBuilderAPI_MakeFace(BSplineSurf).Face();\n\
4514 GProp_GProps System;\n\
4515 BRepGProp::SurfaceProperties(S,System);\n\
4516 gp_Pnt G = System.CentreOfMass ();\n\
4517 Standard_Real Area = System.Mass();\n\
4518 gp_Mat I = System.MatrixOfInertia();\n\
4520 PocessTextInDialog("Surface Properties", Message);
4521 MessageBoxW (AfxGetApp()->m_pMainWnd->m_hWnd, string.ToWideString(), L"Surface Properties", MB_OK);
4525 void CModelingDoc::OnVolume()
4527 AIS_ListOfInteractive aList;
4528 myAISContext->DisplayedObjects(aList);
4529 AIS_ListIteratorOfListOfInteractive aListIterator;
4530 for(aListIterator.Initialize(aList);aListIterator.More();aListIterator.Next()){
4531 myAISContext->Remove (aListIterator.Value(), Standard_False);
4535 TopoDS_Shape S = BRepPrimAPI_MakeWedge(60.,100.,80.,20.).Shape();
4536 Handle(AIS_Shape) ais1 = new AIS_Shape(S);
4537 myAISContext->SetColor(ais1,Quantity_NOC_GREEN,Standard_False);
4538 myAISContext->SetMaterial(ais1,Graphic3d_NOM_PLASTIC,Standard_False);
4539 myAISContext->Display(ais1,Standard_False);
4543 GProp_GProps System;
4544 BRepGProp::VolumeProperties(S,System);
4545 gp_Pnt G = System.CentreOfMass ();
4546 Standard_Real Volume = System.Mass();
4547 gp_Mat I = System.MatrixOfInertia();
4549 TCollection_ExtendedString string("Volume Of all the Shape =");
4550 TCollection_ExtendedString string1(Volume);
4553 string += "\nCenterOfMass : \n X=";
4564 string += "Matrix of Inertia :\n ";
4593 TCollection_AsciiString Message ("\
4595 TopoDS_Shape S = BRepBuilderAPI_MakeWedge(60.,100.,80.,20.);;\n\
4596 GProp_GProps System;\n\
4597 BRepGProp::VolumeProperties(S,System);\n\
4598 gp_Pnt G = System.CentreOfMass ();\n\
4599 Standard_Real Volume = System.Mass();\n\
4600 gp_Mat I = System.MatrixOfInertia();\n\
4602 PocessTextInDialog("Volume Properties", Message);
4603 MessageBoxW (AfxGetApp()->m_pMainWnd->m_hWnd, string.ToWideString(), L"Volume Properties", MB_OK);
4607 void CModelingDoc::OnButtonFill()
4609 // TODO: Add your command handler code here
4610 myAISContext->InitSelected();
4611 if (myAISContext->MoreSelected()) {
4612 AIS1 = Handle(AIS_Shape)::DownCast(myAISContext->SelectedInteractive());
4613 myAISContext->Unhilight (AIS1, Standard_True);
4614 myAISContext->Activate(AIS1,2);
4615 myState = SELECT_EDGE_PLATE;
4616 ((OCC_MainFrame*)AfxGetMainWnd())->SetStatusMessage("Select hole contour edges and then press right mouse button"); }
4618 AIS_ListOfInteractive LI;
4619 myAISContext->DisplayedObjects(LI);
4621 if(OnFileImportBrep_WithInitDir (L"HoleFilling") == 1)
4623 myAISContext->DisplayedObjects(LI);
4624 myAISContext->SetSelected(LI.First(), Standard_True);
4628 AfxMessageBox (L"Select a shape before!");
4632 void CModelingDoc::OnStopStop()
4634 // TODO: Add your command handler code here
4636 if (myState == SELECT_EDGE_PLATE ) {
4637 Standard_Integer nbedges = 0;
4638 for (myAISContext->InitSelected(); myAISContext->MoreSelected();
4639 myAISContext->NextSelected()) {
4643 Handle(GeomPlate_HArray1OfHCurve) Fronts =
4644 new GeomPlate_HArray1OfHCurve(1, nbedges);
4645 Handle(TColStd_HArray1OfInteger) Tang =
4646 new TColStd_HArray1OfInteger(1,nbedges);
4647 Handle(TColStd_HArray1OfInteger) NbPtsCur =
4648 new TColStd_HArray1OfInteger(1,nbedges);
4649 Standard_Integer i = 0;
4650 TopoDS_Shape S1 = AIS1->Shape();
4651 TopTools_IndexedDataMapOfShapeListOfShape M;
4652 TopExp::MapShapesAndAncestors(S1, TopAbs_EDGE, TopAbs_FACE, M);
4654 for (myAISContext->InitSelected(); myAISContext->MoreSelected();myAISContext->NextSelected()) {
4656 Tang->SetValue(i,1);
4657 NbPtsCur->SetValue(i,10);
4658 TopoDS_Edge E = TopoDS::Edge(myAISContext->SelectedShape());
4659 TopoDS_Face F = TopoDS::Face(M.FindFromKey(E).First());
4661 BRepAdaptor_Surface S(F);
4662 GeomAdaptor_Surface aGAS = S.Surface();
4663 Handle(GeomAdaptor_HSurface) aHGAS = new GeomAdaptor_HSurface(aGAS);
4665 Handle(BRepAdaptor_HCurve2d) C = new BRepAdaptor_HCurve2d();
4666 C->ChangeCurve2d().Initialize(E,F);
4668 Adaptor3d_CurveOnSurface ConS(C,aHGAS);
4670 Handle (Adaptor3d_HCurveOnSurface) HConS = new Adaptor3d_HCurveOnSurface(ConS);
4671 Fronts->SetValue(i,HConS);
4673 GeomPlate_BuildPlateSurface abuildplate(NbPtsCur,Fronts,Tang,3);
4674 abuildplate.Perform();
4675 if (!abuildplate.IsDone()){ // New in 2.0
4676 MessageBoxW (AfxGetApp()->m_pMainWnd->m_hWnd, L"Error : Build plate not valid!", L"CasCade Error", MB_ICONERROR);
4679 Handle(GeomPlate_Surface) aplate = abuildplate.Surface();
4681 GeomPlate_MakeApprox aMKS(aplate, Precision::Approximation(), 4, 7, 0.001, 1);
4682 Handle(Geom_BSplineSurface) support = aMKS.Surface();
4683 BRepBuilderAPI_MakeWire MW;
4684 TopTools_Array1OfShape tab(1,nbedges);
4685 for (i=1 ; i<=nbedges ; i++) {
4686 if (abuildplate.Sense()->Value(abuildplate.Order()->Value(i))==1) {
4687 BRepBuilderAPI_MakeEdge ME(abuildplate.Curves2d()->Value(abuildplate.Order()->Value(i)),
4689 Fronts->Value(abuildplate.Order()->Value(i))->LastParameter(),
4690 Fronts->Value(abuildplate.Order()->Value(i))->FirstParameter());
4691 TopoDS_Edge E = ME.Edge();
4692 BRepLib::BuildCurves3d(E);
4693 tab(abuildplate.Order()->Value(i)) = E;
4697 BRepBuilderAPI_MakeEdge ME(abuildplate.Curves2d()->Value(abuildplate.Order()->Value(i)),
4699 Fronts->Value(abuildplate.Order()->Value(i))->FirstParameter(),
4700 Fronts->Value(abuildplate.Order()->Value(i))->LastParameter());
4701 TopoDS_Edge E = ME.Edge();
4702 BRepLib::BuildCurves3d(E);
4703 tab(abuildplate.Order()->Value(i)) = E;
4706 for (i=1 ; i<=nbedges ; i++)
4707 MW.Add(TopoDS::Edge(tab(i)));
4713 catch(StdFail_NotDone)
4715 AfxMessageBox (L"Can't build wire!");
4720 AfxMessageBox (L"Wire is not closed!");
4722 //throw Standard_Failure("Wire is not closed");
4725 BRepBuilderAPI_MakeFace MF(support,W,Standard_True);
4728 BRepTopAdaptor_FClass2d clas2d(aface,Precision::Confusion());
4729 if (clas2d.PerformInfinitePoint() == TopAbs_IN) {
4731 BRepBuilderAPI_MakeFace MF1(support,W,Standard_True);
4734 if (!BRepAlgo::IsValid(aface))
4735 MessageBoxW (AfxGetApp()->m_pMainWnd->m_hWnd, L"Error : The plate face is not valid!", L"CasCade Error", MB_ICONERROR);
4737 Handle(AIS_Shape) anAISShape = new AIS_Shape(aface);
4738 myAISContext->SetColor (anAISShape,Quantity_NOC_AZURE, Standard_False);
4739 myAISContext->SetMaterial (anAISShape, Graphic3d_NOM_SILVER, Standard_False);
4740 myAISContext->SetDisplayMode (anAISShape, 1, Standard_False);
4741 myAISContext->Display (anAISShape, Standard_True);
4745 void CModelingDoc::OnFillwithtang()
4747 static BOOL flag = 0;
4750 Handle(AIS_InteractiveObject) aObject;
4751 myAISContext ->InitSelected();
4752 if(myAISContext->MoreSelected())
4753 aObject = myAISContext->SelectedInteractive();
4754 ((OCC_MainFrame*)AfxGetMainWnd())->SetStatusMessage("Select a file with second face");
4755 if(OnFileImportBrep_WithInitDir (L"TangentSurface") == 1){
4756 ((OCC_MainFrame*)AfxGetMainWnd())->SetStatusMessage("");
4757 AIS_ListOfInteractive aList;
4758 myAISContext->DisplayedObjects(aList);
4759 AIS_ListIteratorOfListOfInteractive aListIterator;
4760 for(aListIterator.Initialize(aList);aListIterator.More();aListIterator.Next()){
4761 myAISContext->Remove (aListIterator.Value(), Standard_False);
4763 myAISContext->UpdateCurrentViewer();
4766 myAISContext->SetSelected(aObject, Standard_True);
4769 myAISContext->InitSelected();
4770 if (myAISContext->MoreSelected()) {
4771 Handle(AIS_Shape) ashape = Handle(AIS_Shape)::DownCast(myAISContext->SelectedInteractive());
4773 THE_F1 = TopoDS::Face(ashape->Shape());
4775 catch(Standard_Failure){}
4776 if (THE_F1.IsNull())
4778 AfxMessageBox (L"Current object is not a face!\n\
4779 Please, select a face to continue\nthe creation of a tangent surface.");
4782 myAISContext->Activate(ashape,2);
4783 myState = SELECT_EDGE_PLATE_TGTES_1;
4785 ((OCC_MainFrame*)AfxGetMainWnd())->SetStatusMessage("Select an edge on the first face");
4788 AIS_ListOfInteractive LI;
4789 myAISContext->DisplayedObjects(LI);
4791 ((OCC_MainFrame*)AfxGetMainWnd())->SetStatusMessage("Select a file with first face");
4792 if(OnFileImportBrep_WithInitDir (L"TangentSurface") == 1){
4793 ((OCC_MainFrame*)AfxGetMainWnd())->SetStatusMessage("");
4794 AIS_ListOfInteractive aList;
4795 myAISContext->DisplayedObjects(aList);
4796 AIS_ListIteratorOfListOfInteractive aListIterator;
4797 for(aListIterator.Initialize(aList);aListIterator.More();aListIterator.Next()){
4798 myAISContext->Remove(aListIterator.Value(), Standard_False);
4800 myAISContext->UpdateCurrentViewer();
4803 ((OCC_MainFrame*)AfxGetMainWnd())->SetStatusMessage("");
4804 myAISContext->DisplayedObjects(LI);
4805 myAISContext->SetSelected (LI.First(), Standard_True);
4811 AfxMessageBox (L"Select a face before");
4815 void CModelingDoc::InputEvent(const Standard_Integer /*x*/,
4816 const Standard_Integer /*y*/,
4817 const Handle(V3d_View)& /*aView*/)
4819 myAISContext->SelectDetected();
4820 myAISContext->UpdateCurrentViewer();
4822 if (myState == SELECT_EDGE_PLATE_TGTES_1) {
4823 myAISContext->InitSelected();
4824 if (myAISContext->MoreSelected()) {
4825 THE_E1 = TopoDS::Edge(myAISContext->SelectedShape());
4826 myState = SELECT_EDGE_PLATE_TGTES_2;
4828 AIS_ListOfInteractive aLI;
4829 myAISContext->DisplayedObjects(aLI);
4830 if(aLI.Extent() == 2){
4831 myState = SELECT_EDGE_PLATE_TGTES_2;
4832 if (myAISContext->IsSelected(aLI.First()))
4833 myAISContext->SetSelected (aLI.Last(), Standard_True);
4835 myAISContext->SetSelected (aLI.First(), Standard_True);
4836 myAISContext->InitSelected();
4837 Handle(AIS_Shape) ashape = Handle(AIS_Shape)::DownCast(myAISContext->SelectedInteractive());
4838 THE_F2 = TopoDS::Face(ashape->Shape());
4839 myAISContext->Activate(ashape,2);
4840 myState = SELECT_EDGE_PLATE_TGTES_3;
4841 ((OCC_MainFrame*)AfxGetMainWnd())->SetStatusMessage("Select an edge on the second face");
4845 ((OCC_MainFrame*)AfxGetMainWnd())->SetStatusMessage("Select second face");
4846 AIS_ListOfInteractive LI;
4847 myAISContext->DisplayedObjects(LI);
4848 if(LI.Extent() == 1){
4849 if(OnFileImportBrep_WithInitDir (L"TangentSurface") == 1)
4854 AfxMessageBox (L"Select an edge on the face!");
4857 else if (myState == SELECT_EDGE_PLATE_TGTES_2) {
4858 myAISContext->InitSelected();
4859 if (myAISContext->MoreSelected()) {
4860 Handle(AIS_Shape) ashape = Handle(AIS_Shape)::DownCast(myAISContext->SelectedInteractive());
4861 THE_F2 = TopoDS::Face(ashape->Shape());
4862 myAISContext->Activate(ashape,2);
4863 myState = SELECT_EDGE_PLATE_TGTES_3;
4864 ((OCC_MainFrame*)AfxGetMainWnd())->SetStatusMessage("Select an edge on the second face");
4867 AfxMessageBox (L"Select the second face!");
4869 else if (myState == SELECT_EDGE_PLATE_TGTES_3) {
4870 myAISContext->InitSelected();
4871 if (myAISContext->MoreSelected()) {
4872 THE_E2 = TopoDS::Edge(myAISContext->SelectedShape());
4874 Standard_Integer i, nbPntsOnFaces=10;
4875 Standard_Real u,First, Last, Delta, Tol=0.001, TolProj;
4881 //get the pcurve, curve and surface
4882 BRepAdaptor_Curve Curve3d1(THE_E1), Curve3d2(THE_E2);
4883 BRepAdaptor_Curve2d Curve2d1(THE_E1,THE_F1), Curve2d2(THE_E2,THE_F2);
4884 BRepAdaptor_Surface Surf1(THE_F1), Surf2(THE_F2);
4886 //compute the average plane : initial surface
4887 Handle(TColgp_HArray1OfPnt) theTanPoints = new
4888 TColgp_HArray1OfPnt (1,2*nbPntsOnFaces );
4890 Delta = (Curve3d1.LastParameter()-Curve3d1.FirstParameter())/(nbPntsOnFaces-1);
4891 for (u=Curve3d1.FirstParameter(),i=1;i<=nbPntsOnFaces; i++,u+=Delta)
4892 theTanPoints->SetValue(i,Curve3d1.Value(u));
4894 Delta = (Curve3d2.LastParameter()-Curve3d2.FirstParameter())/(nbPntsOnFaces-1);
4895 for (u=Curve3d2.FirstParameter(),i=1;i<=nbPntsOnFaces; i++,u+=Delta)
4896 theTanPoints->SetValue(nbPntsOnFaces+i,Curve3d2.Value(u));
4898 //Building an initial plane
4899 GeomPlate_BuildAveragePlane aMkPlane (theTanPoints,int(Tol),1,1,1);
4900 Handle(Geom_Plane) aPlane = aMkPlane.Plane();
4901 gp_Pln aPln = aPlane->Pln();
4902 gp_XYZ aNormale = aPln.Axis().Direction().XYZ();
4903 gp_Trsf aTrsf; // to compute the U and V of the points
4904 aTrsf.SetTransformation(aPln.Position());
4906 aPlane->D1(0,0,P,W1,W2); // extract plane DU & DV
4908 // 1st surface tangencies constraints
4909 Delta = (Curve3d1.LastParameter()-Curve3d1.FirstParameter())/(nbPntsOnFaces-1);
4910 for (u=Curve3d1.FirstParameter(),i=1; i<=nbPntsOnFaces; i++,u+=Delta) {
4911 P = Curve3d1.Value(u).Transformed(aTrsf);
4912 gp_XY UV(P.X(),P.Y());
4913 aPlate.Load(Plate_PinpointConstraint(UV,aNormale*P.Z()));
4915 Surf1.D1(P2d.X(),P2d.Y(),P,V1,V2); // extract surface UV of the point
4916 aPlate.Load(Plate_GtoCConstraint(UV,
4917 Plate_D1(W1.XYZ(),W2.XYZ()),
4918 Plate_D1(V1.XYZ(),V2.XYZ())));
4921 Delta = (Curve3d2.LastParameter()-Curve3d2.FirstParameter())/(nbPntsOnFaces-1);
4922 for (u=Curve3d2.FirstParameter(),i=1; i<=nbPntsOnFaces; i++,u+=Delta) {
4923 P = Curve3d2.Value(u).Transformed(aTrsf);
4924 gp_XY UV(P.X(),P.Y());
4925 aPlate.Load(Plate_PinpointConstraint(UV,aNormale*P.Z()));
4928 Surf2.D1(P2d.X(),P2d.Y(),P,V1,V2);
4929 aPlate.Load(Plate_GtoCConstraint(UV,
4930 Plate_D1(W1.XYZ(),W2.XYZ()),
4931 Plate_D1(V1.XYZ()*-1,V2.XYZ()*-1)));
4934 ((OCC_MainFrame*)AfxGetMainWnd())->SetStatusMessage("Select a file with passing points");
4935 //Some passing points
4936 CFileDialog dlg(TRUE,
4939 OFN_HIDEREADONLY | OFN_OVERWRITEPROMPT,
4940 L"Points Files (*.pass)|*.pass; |All Files (*.*)|*.*||",
4944 initdir.GetEnvironmentVariable (L"CSF_OCCTDataPath");
4945 initdir += L"\\occ";
4947 dlg.m_ofn.lpstrInitialDir = initdir;
4949 if (dlg.DoModal() == IDOK)
4951 ((OCC_MainFrame*)AfxGetMainWnd())->SetStatusMessage("Building the tangent surface...");
4952 SetCursor(AfxGetApp()->LoadStandardCursor(IDC_WAIT));
4953 CString filename = dlg.GetPathName();
4955 std::istream in(&fic);
4956 if (!fic.open(filename, std::ios::in))
4957 MessageBoxW (AfxGetApp()->m_pMainWnd->m_hWnd, L"Error : Unable to open file", L"CasCade Error", MB_ICONERROR);
4958 Standard_Real x,y,z;
4962 while (!in.fail()|| !in.eof()){
4963 if (in >> x && in >> y && in >> z){
4964 PP = gp_Pnt(x, y, z);
4965 P = PP.Transformed(aTrsf);
4966 aPlate.Load(Plate_PinpointConstraint(gp_XY(P.X(),P.Y()),
4968 BRepBuilderAPI_MakeVertex V(PP);
4969 B.Add(C,V.Vertex());
4973 Handle(AIS_Shape) anAISCompound = new AIS_Shape(C);
4974 myAISContext->Display(anAISCompound, Standard_False);
4978 SetCursor(AfxGetApp()->LoadStandardCursor(IDC_WAIT));
4979 ((OCC_MainFrame*)AfxGetMainWnd())->SetStatusMessage("Building the tangent surface...");
4981 Standard_Integer Order = 3; // constraints continuity + 2
4982 aPlate.SolveTI(Order,1.);
4983 if (!aPlate.IsDone()){
4984 MessageBoxW (AfxGetApp()->m_pMainWnd->m_hWnd, L"Error : Build plate not valid!", L"CasCade Error", MB_ICONERROR);
4987 //Plate Surface creation
4988 Handle(GeomPlate_Surface) aPlateSurface = new GeomPlate_Surface(aPlane,aPlate);
4989 //BSplineSurface approximation
4990 GeomPlate_MakeApprox aMkSurf(aPlateSurface,Tol,1,8,0.1,1);
4991 Handle(Geom_Surface) theSurface =aMkSurf.Surface();
4993 // Face building ...
4994 Handle(Geom2d_Curve)C1,C2,C3,C4;
4995 Handle(Geom_Curve)C;
4996 C = BRep_Tool::Curve(THE_E1,First,Last);
4998 C1 = GeomProjLib::Curve2d(C,First,Last,theSurface,TolProj);
4999 TopoDS_Edge Ed1 = BRepBuilderAPI_MakeEdge(C1,theSurface).Edge();
5001 C = BRep_Tool::Curve(THE_E2,First,Last);
5003 C3 = GeomProjLib::Curve2d(C,First,Last,theSurface,TolProj);
5004 TopoDS_Edge Ed3 = BRepBuilderAPI_MakeEdge(C3,theSurface).Edge();
5006 C2 = GCE2d_MakeSegment(C1->Value(C1->FirstParameter()),
5007 C3->Value(C3->FirstParameter())).Value();
5008 TopoDS_Edge Ed2 = BRepBuilderAPI_MakeEdge(C2,theSurface).Edge();
5009 C4 = GCE2d_MakeSegment(C1->Value(C1->LastParameter()),
5010 C3->Value(C3->LastParameter())).Value();
5011 TopoDS_Edge Ed4 = BRepBuilderAPI_MakeEdge(C4,theSurface).Edge();
5014 TopoDS_Wire theWire = BRepBuilderAPI_MakeWire(Ed1,Ed2,Ed3,Ed4);
5015 TopoDS_Face theFace = BRepBuilderAPI_MakeFace(theWire);
5016 BRepLib::BuildCurves3d(theFace);
5017 if (!BRepAlgo::IsValid(theFace)){
5018 C2 = GCE2d_MakeSegment(C1->Value(C1->LastParameter()),
5019 C3->Value(C3->FirstParameter())).Value();
5020 Ed2 = BRepBuilderAPI_MakeEdge(C2,theSurface).Edge();
5021 C4 = GCE2d_MakeSegment(C3->Value(C3->LastParameter()),
5022 C1->Value(C1->FirstParameter())).Value();
5023 Ed4 = BRepBuilderAPI_MakeEdge(C4,theSurface).Edge();
5025 theWire = BRepBuilderAPI_MakeWire(Ed1,Ed2,Ed3,Ed4);
5026 theFace = BRepBuilderAPI_MakeFace(theWire);
5027 BRepLib::BuildCurves3d(theFace);
5028 if (!BRepAlgo::IsValid(theFace))
5029 MessageBoxW (AfxGetApp()->m_pMainWnd->m_hWnd, L"Error : The plate surface is not valid!!!", L"CasCade Error", MB_ICONERROR);
5032 Handle(AIS_Shape) anAISShape=new AIS_Shape(theFace);
5033 myAISContext->SetColor (anAISShape, Quantity_NOC_BLUE1, Standard_False);
5034 myAISContext->SetMaterial (anAISShape, Graphic3d_NOM_SILVER, Standard_False);
5035 myAISContext->SetDisplayMode (anAISShape, 1, Standard_False);
5036 myAISContext->Display (anAISShape, Standard_False);
5040 AfxMessageBox (L"Select an edge on the second face!");
5041 ((OCC_MainFrame*)AfxGetMainWnd())->SetStatusMessage("");
5046 void CModelingDoc::Popup(const Standard_Integer x,
5047 const Standard_Integer y ,
5048 const Handle(V3d_View)& aView)
5050 Standard_Integer PopupMenuNumber=0;
5051 myAISContext->InitSelected();
5052 if (myState == SELECT_EDGE_PLATE)
5054 else if (myAISContext->MoreSelected())
5058 VERIFY(menu.LoadMenu(IDR_Popup3D));
5059 CMenu* pPopup = menu.GetSubMenu(PopupMenuNumber);
5060 ASSERT(pPopup != NULL);
5062 if (PopupMenuNumber == 1) // more than 1 object.
5064 bool OneOrMoreInShading = false;
5065 for (myAISContext->InitSelected();myAISContext->MoreSelected ();myAISContext->NextSelected ())
5066 if (myAISContext->IsDisplayed(myAISContext->SelectedInteractive(),1)) OneOrMoreInShading=true;
5067 if(!OneOrMoreInShading)
5068 pPopup->EnableMenuItem(5, MF_BYPOSITION | MF_DISABLED | MF_GRAYED);
5072 POINT winCoord = { x , y };
5073 Handle(WNT_Window) aWNTWindow=
5074 Handle(WNT_Window)::DownCast(aView->Window());
5075 ClientToScreen ( (HWND)(aWNTWindow->HWindow()),&winCoord);
5076 pPopup->TrackPopupMenu(TPM_LEFTALIGN | TPM_RIGHTBUTTON , winCoord.x, winCoord.y ,