8b7c5e47 |
1 | if { [info exists square] } { |
2 | set prop "square" |
3 | set mass $square |
4 | if { [info exists tol_square] } { |
5 | regexp {Mass +: +([-0-9.+eE]+)} [sprops result $tol_square] full m |
6 | } else { |
7 | regexp {Mass +: +([-0-9.+eE]+)} [sprops result] full m |
8 | } |
9 | } |
10 | if { [info exists length] } { |
11 | set prop "length" |
12 | set mass $length |
13 | regexp {Mass +: +([-0-9.+eE]+)} [lprops result] full m |
14 | |
15 | puts "checksection" |
16 | puts [checksection result] |
17 | } |
18 | |
19 | #if mass (length or square) is empty in test case then result should be an empty shape. |
20 | if { [info exists mass] } { |
21 | puts "checkshape" |
22 | checkshape result |
23 | |
24 | if { [string compare "$mass" "empty"] != 0 } { |
25 | if { $m == 0 } { |
26 | puts "Error : The command is not valid. The $prop is 0." |
27 | } |
28 | if { $mass > 0 } { |
29 | puts "The expected $prop is $mass" |
30 | } |
31 | #check of change of square is < 1% |
32 | if { ($mass != 0 && [expr 1.*abs($mass - $m)/$mass] > 0.01) || ($mass == 0 && $m != 0) } { |
33 | puts "Error : The $prop of result shape is $m" |
34 | } |
35 | } else { |
36 | if { $m != 0 } { |
37 | puts "Error : The command is not valid. The $prop is $m" |
38 | } |
39 | } |
40 | } |
41 | |
42 | set glob_inf [info global nb_*_good] |
43 | if { [regexp "nb_.*_good" $glob_inf] == 1 } { |
44 | if { [info exists nbsh_t] } { |
45 | set nb_info [nbshapes result -t] |
46 | } else { |
47 | set nb_info [nbshapes result] |
48 | } |
49 | } |
50 | |
51 | if { [info exists nb_v_good] } { |
52 | regexp {VERTEX +: +([-0-9.+eE]+)} $nb_info full nb_v |
53 | if { ${nb_v} != ${nb_v_good} } { |
54 | puts "Error : Result shape is WRONG because it must contains ${nb_v_good} vertices instead of ${nb_v}" |
55 | } else { |
56 | puts "Result shape contains ${nb_v} vertices" |
57 | } |
58 | } |
59 | |
60 | if { [info exists nb_e_good] } { |
61 | regexp {EDGE +: +([-0-9.+eE]+)} $nb_info full nb_e |
62 | if { ${nb_e} != ${nb_e_good} } { |
63 | puts "Error : Result shape is WRONG because it must contains ${nb_e_good} edges instead of ${nb_e}" |
64 | } else { |
65 | puts "Result shape contains ${nb_e} edges" |
66 | } |
67 | } |
68 | |
69 | if { [info exists nb_w_good] } { |
70 | regexp {WIRE +: +([-0-9.+eE]+)} $nb_info full nb_w |
71 | if { ${nb_w} != ${nb_w_good} } { |
72 | puts "Error : Result shape is WRONG because it must contains ${nb_w_good} wires instead of ${nb_w}" |
73 | } else { |
74 | puts "Result shape contains ${nb_w} wires" |
75 | } |
76 | } |
77 | |
78 | if { [info exists nb_f_good] } { |
79 | regexp {FACE +: +([-0-9.+eE]+)} $nb_info full nb_f |
80 | if { ${nb_f} != ${nb_f_good} } { |
81 | puts "Error : Result shape is WRONG because it must contains ${nb_f_good} faces instead of ${nb_f}" |
82 | } else { |
83 | puts "Result shape contains ${nb_f} faces" |
84 | } |
85 | } |
86 | |
87 | if { [info exists nb_sh_good] } { |
88 | regexp {SHELL +: +([-0-9.+eE]+)} $nb_info full nb_sh |
89 | if { ${nb_sh} != ${nb_sh_good} } { |
90 | puts "Error : Result shape is WRONG because it must contains ${nb_sh_good} shells instead of ${nb_sh}" |
91 | } else { |
92 | puts "Result shape contains ${nb_sh} shells" |
93 | } |
94 | } |
95 | |
96 | if { [info exists nb_sol_good] } { |
97 | regexp {SOLID +: +([-0-9.+eE]+)} $nb_info full nb_sol |
98 | if { ${nb_sol} != ${nb_sol_good} } { |
99 | puts "Error : Result shape is WRONG because it must contains ${nb_sol_good} solids instead of ${nb_sol}" |
100 | } else { |
101 | puts "Result shape contains ${nb_sol} solids" |
102 | } |
103 | } |
104 | |
105 | if { [info exists nb_compsol_good] } { |
106 | regexp {COMPSOLID +: +([-0-9.+eE]+)} $nb_info full nb_compsol |
107 | if { ${nb_compsol} != ${nb_compsol_good} } { |
108 | puts "Error : Result shape is WRONG because it must contains ${nb_compsol_good} compsolids instead of ${nb_compsol}" |
109 | } else { |
110 | puts "Result shape contains ${nb_compsol} compsolids" |
111 | } |
112 | } |
113 | |
114 | if { [info exists nb_compound_good] } { |
115 | regexp {COMPOUND +: +([-0-9.+eE]+)} $nb_info full nb_compound |
116 | if { ${nb_compound} != ${nb_compound_good} } { |
117 | puts "Error : Result shape is WRONG because it must contains ${nb_compound_good} compounds instead of ${nb_compound}" |
118 | } else { |
119 | puts "Result shape contains ${nb_compound} compounds" |
120 | } |
121 | } |
122 | |
123 | if { [info exists nb_shape_good] } { |
124 | regexp {SHAPE +: +([-0-9.+eE]+)} $nb_info full nb_shape |
125 | if { ${nb_shape} != ${nb_shape_good} } { |
126 | puts "Error : Result shape is WRONG because it must contains ${nb_shape_good} shapes instead of ${nb_shape}" |
127 | } else { |
128 | puts "Result shape contains ${nb_shape} shapes" |
129 | } |
130 | } |
131 | |
132 | if { [info exists nb_fe_good] && [info exists nb_fe] } { |
133 | if { ${nb_fe} != ${nb_fe_good} } { |
134 | puts "Error : Result shape is WRONG because it must contains ${nb_shape_good} shapes instead of ${nb_shape}" |
135 | } else { |
136 | puts "Result shape contains ${nb_fe} free edges" |
137 | } |
138 | } |
139 | |
140 | if { [info exists rel_tol] } { |
141 | puts "\nChecking triangulation area (triarea command)..." |
142 | set rel_err [expr abs([CheckTriArea result $area_eps])] |
143 | if { $rel_err > $rel_tol } { |
144 | puts "Error : area by triangles differs from the actual area by $rel_err %" |
145 | } else { |
146 | if { $rel_tol > 1 && $rel_tol < 100 } { |
147 | puts "Error: Improvement: The current area difference is $rel_err instead of $rel_tol" |
148 | } |
149 | } |
150 | } |
151 | |
152 | if { [isdraw result] } { |
153 | if { [info exists 2dviewer] } { |
154 | clear |
155 | smallview |
156 | donly result |
157 | fit |
158 | xwd $imagedir/${test_image}.png |
159 | } |
160 | if { [info exists 3dviewer] } { |
161 | #for multiview support: dump result from all opened views |
162 | set view_str [vviewlist long] |
163 | set view_list [regexp -all -inline {\S+} $view_str] |
164 | foreach {view_name} $view_list { |
165 | vactivate $view_name |
166 | vclear |
167 | vdisplay result |
168 | vsetdispmode 1 |
169 | vfit |
170 | vzfit |
171 | vdump $imagedir/${test_image}_[regsub -all {/} $view_name {_}].png |
172 | } |
173 | } |
174 | } |
175 | |
176 | if { [info exists only_screen] } { |
177 | #for multiview support: dump result from all opened views |
178 | set view_str [vviewlist long] |
179 | set view_list [regexp -all -inline {\S+} $view_str] |
180 | foreach {view_name} $view_list { |
181 | vactivate $view_name |
182 | vdump $imagedir/${test_image}_[regsub -all {/} $view_name {_}].png |
183 | } |
184 | } |
185 | |
186 | if { [info exists only_screen_axo] } { |
187 | xwd $imagedir/${test_image}.png |
188 | } |
189 | |
190 | # to end a test script |
191 | puts "TEST COMPLETED" |