0024053: Section between plane and sphere is not correct
[occt.git] / src / IntTools / IntTools_FaceFace.cxx
CommitLineData
b311480e 1// Created on: 2000-11-23
2// Created by: Michael KLOKOV
3// Copyright (c) 2000-2012 OPEN CASCADE SAS
4//
5// The content of this file is subject to the Open CASCADE Technology Public
6// License Version 6.5 (the "License"). You may not use the content of this file
7// except in compliance with the License. Please obtain a copy of the License
8// at http://www.opencascade.org and read it completely before using this file.
9//
10// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
11// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
12//
13// The Original Code and all software distributed under the License is
14// distributed on an "AS IS" basis, without warranty of any kind, and the
15// Initial Developer hereby disclaims all such warranties, including without
16// limitation, any warranties of merchantability, fitness for a particular
17// purpose or non-infringement. Please see the License for the specific terms
18// and conditions governing the rights and limitations under the License.
19
7fd59977 20
21
22#include <IntTools_FaceFace.ixx>
23
24#include <Precision.hxx>
25
26#include <TColStd_HArray1OfReal.hxx>
27#include <TColStd_Array1OfReal.hxx>
28#include <TColStd_Array1OfInteger.hxx>
29#include <TColStd_SequenceOfReal.hxx>
30#include <TColStd_ListOfInteger.hxx>
31#include <TColStd_ListIteratorOfListOfInteger.hxx>
32#include <TColStd_Array1OfListOfInteger.hxx>
33
34#include <gp_Lin2d.hxx>
35#include <gp_Ax22d.hxx>
36#include <gp_Circ2d.hxx>
37#include <gp_Torus.hxx>
38#include <gp_Cylinder.hxx>
39
40#include <Bnd_Box.hxx>
41
42#include <TColgp_HArray1OfPnt2d.hxx>
43#include <TColgp_SequenceOfPnt2d.hxx>
44#include <TColgp_Array1OfPnt.hxx>
45#include <TColgp_Array1OfPnt2d.hxx>
46
47#include <IntAna_QuadQuadGeo.hxx>
48
49#include <IntSurf_PntOn2S.hxx>
50#include <IntSurf_LineOn2S.hxx>
51#include <IntSurf_PntOn2S.hxx>
52#include <IntSurf_ListOfPntOn2S.hxx>
53#include <IntRes2d_Domain.hxx>
54#include <ProjLib_Plane.hxx>
55
56#include <IntPatch_GLine.hxx>
57#include <IntPatch_RLine.hxx>
58#include <IntPatch_WLine.hxx>
59#include <IntPatch_ALine.hxx>
60#include <IntPatch_ALineToWLine.hxx>
61
62#include <ElSLib.hxx>
63#include <ElCLib.hxx>
64
65#include <Extrema_ExtCC.hxx>
66#include <Extrema_POnCurv.hxx>
67#include <BndLib_AddSurface.hxx>
68
69#include <Adaptor3d_SurfacePtr.hxx>
70#include <Adaptor2d_HLine2d.hxx>
71
72#include <GeomAbs_SurfaceType.hxx>
73#include <GeomAbs_CurveType.hxx>
74
75#include <Geom_Surface.hxx>
76#include <Geom_Line.hxx>
77#include <Geom_Circle.hxx>
78#include <Geom_Ellipse.hxx>
79#include <Geom_Parabola.hxx>
80#include <Geom_Hyperbola.hxx>
81#include <Geom_TrimmedCurve.hxx>
82#include <Geom_BSplineCurve.hxx>
83#include <Geom_RectangularTrimmedSurface.hxx>
84#include <Geom_OffsetSurface.hxx>
85#include <Geom_Curve.hxx>
86#include <Geom_Conic.hxx>
87
88#include <Geom2d_TrimmedCurve.hxx>
89#include <Geom2d_BSplineCurve.hxx>
90#include <Geom2d_Line.hxx>
91#include <Geom2d_Curve.hxx>
92#include <Geom2d_Circle.hxx>
93
94#include <Geom2dAPI_InterCurveCurve.hxx>
95#include <Geom2dInt_GInter.hxx>
96#include <GeomAdaptor_Curve.hxx>
97#include <GeomAdaptor_HSurface.hxx>
98#include <GeomAdaptor_Surface.hxx>
99#include <GeomLib_CheckBSplineCurve.hxx>
100#include <GeomLib_Check2dBSplineCurve.hxx>
101
102#include <GeomInt_WLApprox.hxx>
103#include <GeomProjLib.hxx>
104#include <GeomAPI_ProjectPointOnSurf.hxx>
105#include <Geom2dAdaptor_Curve.hxx>
7fd59977 106#include <TopoDS.hxx>
107#include <TopoDS_Edge.hxx>
108#include <TopExp_Explorer.hxx>
109
110#include <BRep_Tool.hxx>
111#include <BRepTools.hxx>
112#include <BRepAdaptor_Surface.hxx>
113
7fd59977 114#include <IntTools_Curve.hxx>
115#include <IntTools_Tools.hxx>
116#include <IntTools_Tools.hxx>
117#include <IntTools_TopolTool.hxx>
118#include <IntTools_PntOnFace.hxx>
119#include <IntTools_PntOn2Faces.hxx>
4e57c75e 120#include <BOPInt_Context.hxx>
0fc4f2e2 121#include <IntSurf_ListIteratorOfListOfPntOn2S.hxx>
a2eede02 122
fa9681ca
P
123static
124 void RefineVector(gp_Vec2d& aV2D);
4f189102 125
a2eede02
P
126static
127 void DumpWLine(const Handle(IntPatch_WLine)& aWLine);
7fd59977 128//
129static
130 void TolR3d(const TopoDS_Face& ,
131 const TopoDS_Face& ,
132 Standard_Real& );
133static
134 Handle(Geom_Curve) MakeBSpline (const Handle(IntPatch_WLine)&,
135 const Standard_Integer,
136 const Standard_Integer);
137
138static
139 void Parameters(const Handle(GeomAdaptor_HSurface)&,
140 const Handle(GeomAdaptor_HSurface)&,
141 const gp_Pnt&,
142 Standard_Real&,
143 Standard_Real&,
144 Standard_Real&,
145 Standard_Real&);
146
147static
148 void BuildPCurves (Standard_Real f,Standard_Real l,Standard_Real& Tol,
149 const Handle (Geom_Surface)& S,
150 const Handle (Geom_Curve)& C,
151 Handle (Geom2d_Curve)& C2d);
152
153static
154 void CorrectSurfaceBoundaries(const TopoDS_Face& theFace,
155 const Standard_Real theTolerance,
156 Standard_Real& theumin,
157 Standard_Real& theumax,
158 Standard_Real& thevmin,
159 Standard_Real& thevmax);
160static
161 Standard_Boolean NotUseSurfacesForApprox
162 (const TopoDS_Face& aF1,
163 const TopoDS_Face& aF2,
164 const Handle(IntPatch_WLine)& WL,
165 const Standard_Integer ifprm,
166 const Standard_Integer ilprm);
167
168static
169 Handle(IntPatch_WLine) ComputePurgedWLine(const Handle(IntPatch_WLine)& theWLine);
170
171static
172 Standard_Real AdjustPeriodic(const Standard_Real theParameter,
173 const Standard_Real parmin,
174 const Standard_Real parmax,
175 const Standard_Real thePeriod,
176 Standard_Real& theOffset);
177
178static
179 Handle(Geom2d_BSplineCurve) MakeBSpline2d(const Handle(IntPatch_WLine)& theWLine,
180 const Standard_Integer ideb,
181 const Standard_Integer ifin,
182 const Standard_Boolean onFirst);
183
184static
185 Standard_Boolean DecompositionOfWLine(const Handle(IntPatch_WLine)& theWLine,
186 const Handle(GeomAdaptor_HSurface)& theSurface1,
187 const Handle(GeomAdaptor_HSurface)& theSurface2,
188 const TopoDS_Face& theFace1,
189 const TopoDS_Face& theFace2,
190 const IntTools_LineConstructor& theLConstructor,
191 const Standard_Boolean theAvoidLConstructor,
192 IntPatch_SequenceOfLine& theNewLines,
4f189102 193 Standard_Real& theReachedTol3d,
4e57c75e 194 const Handle(BOPInt_Context)& );
7fd59977 195
196static
197 Standard_Boolean ParameterOutOfBoundary(const Standard_Real theParameter,
198 const Handle(Geom_Curve)& theCurve,
199 const TopoDS_Face& theFace1,
200 const TopoDS_Face& theFace2,
201 const Standard_Real theOtherParameter,
202 const Standard_Boolean bIncreasePar,
4f189102 203 Standard_Real& theNewParameter,
4e57c75e 204 const Handle(BOPInt_Context)& );
7fd59977 205
206static
207 Standard_Boolean IsCurveValid(Handle(Geom2d_Curve)& thePCurve);
208
209static
210 Standard_Boolean IsPointOnBoundary(const Standard_Real theParameter,
211 const Standard_Real theFirstBoundary,
212 const Standard_Real theSecondBoundary,
213 const Standard_Real theResolution,
214 Standard_Boolean& IsOnFirstBoundary);
215static
216 Standard_Boolean FindPoint(const gp_Pnt2d& theFirstPoint,
217 const gp_Pnt2d& theLastPoint,
218 const Standard_Real theUmin,
219 const Standard_Real theUmax,
220 const Standard_Real theVmin,
221 const Standard_Real theVmax,
222 gp_Pnt2d& theNewPoint);
223
224
225static
226 Standard_Integer ComputeTangentZones( const Handle(GeomAdaptor_HSurface)& theSurface1,
227 const Handle(GeomAdaptor_HSurface)& theSurface2,
228 const TopoDS_Face& theFace1,
229 const TopoDS_Face& theFace2,
230 Handle(TColgp_HArray1OfPnt2d)& theResultOnS1,
231 Handle(TColgp_HArray1OfPnt2d)& theResultOnS2,
4f189102 232 Handle(TColStd_HArray1OfReal)& theResultRadius,
4e57c75e 233 const Handle(BOPInt_Context)& );
7fd59977 234
235static
236 Standard_Boolean FindPoint(const gp_Pnt2d& theFirstPoint,
237 const gp_Pnt2d& theLastPoint,
238 const Standard_Real theUmin,
239 const Standard_Real theUmax,
240 const Standard_Real theVmin,
241 const Standard_Real theVmax,
242 const gp_Pnt2d& theTanZoneCenter,
243 const Standard_Real theZoneRadius,
244 Handle(GeomAdaptor_HSurface) theGASurface,
245 gp_Pnt2d& theNewPoint);
246
247static
248 Standard_Boolean IsInsideTanZone(const gp_Pnt2d& thePoint,
249 const gp_Pnt2d& theTanZoneCenter,
250 const Standard_Real theZoneRadius,
251 Handle(GeomAdaptor_HSurface) theGASurface);
252
253static
4f189102
P
254 gp_Pnt2d AdjustByNeighbour(const gp_Pnt2d& theaNeighbourPoint,
255 const gp_Pnt2d& theOriginalPoint,
256 Handle(GeomAdaptor_HSurface) theGASurface);
7fd59977 257static
4f189102
P
258 Standard_Boolean ApproxWithPCurves(const gp_Cylinder& theCyl,
259 const gp_Sphere& theSph);
7fd59977 260
261static void PerformPlanes(const Handle(GeomAdaptor_HSurface)& theS1,
262 const Handle(GeomAdaptor_HSurface)& theS2,
263 const Standard_Real TolAng,
264 const Standard_Real TolTang,
265 const Standard_Boolean theApprox1,
266 const Standard_Boolean theApprox2,
267 IntTools_SequenceOfCurves& theSeqOfCurve,
268 Standard_Boolean& theTangentFaces);
269
270static Standard_Boolean ClassifyLin2d(const Handle(GeomAdaptor_HSurface)& theS,
271 const gp_Lin2d& theLin2d,
272 const Standard_Real theTol,
273 Standard_Real& theP1,
274 Standard_Real& theP2);
0fc4f2e2 275//
7fd59977 276static
277 void ApproxParameters(const Handle(GeomAdaptor_HSurface)& aHS1,
278 const Handle(GeomAdaptor_HSurface)& aHS2,
279 Standard_Integer& iDegMin,
4f189102 280 Standard_Integer& iNbIter,
0fc4f2e2 281 Standard_Integer& iDegMax);
7fd59977 282
0fc4f2e2
P
283static
284 void Tolerances(const Handle(GeomAdaptor_HSurface)& aHS1,
285 const Handle(GeomAdaptor_HSurface)& aHS2,
286 Standard_Real& aTolArc,
287 Standard_Real& aTolTang,
288 Standard_Real& aUVMaxStep,
289 Standard_Real& aDeflection);
290
0fc4f2e2
P
291static
292 Standard_Boolean SortTypes(const GeomAbs_SurfaceType aType1,
293 const GeomAbs_SurfaceType aType2);
294static
295 Standard_Integer IndexType(const GeomAbs_SurfaceType aType);
d10203e8 296
4f189102 297//
4f189102
P
298static
299 Standard_Real MaxSquareDistance (const Standard_Real aT,
300 const Handle(Geom_Curve)& aC3D,
301 const Handle(Geom2d_Curve)& aC2D1,
302 const Handle(Geom2d_Curve)& aC2D2,
303 const Handle(GeomAdaptor_HSurface) myHS1,
304 const Handle(GeomAdaptor_HSurface) myHS2,
305 const TopoDS_Face& aF1,
306 const TopoDS_Face& aF2,
4e57c75e 307 const Handle(BOPInt_Context)& aCtx);
989341c5 308
309static
310 Standard_Boolean CheckPCurve(const Handle(Geom2d_Curve)& aPC,
311 const TopoDS_Face& aFace);
312
7fd59977 313//
37b6f439 314static
315 Standard_Real FindMaxSquareDistance (const Standard_Real aA,
316 const Standard_Real aB,
317 const Standard_Real aEps,
318 const Handle(Geom_Curve)& aC3D,
319 const Handle(Geom2d_Curve)& aC2D1,
320 const Handle(Geom2d_Curve)& aC2D2,
0c5acd27 321 const Handle(GeomAdaptor_HSurface)& myHS1,
322 const Handle(GeomAdaptor_HSurface)& myHS2,
37b6f439 323 const TopoDS_Face& aF1,
324 const TopoDS_Face& aF2,
4e57c75e 325 const Handle(BOPInt_Context)& aCtx);
37b6f439 326
7fd59977 327//=======================================================================
328//function :
329//purpose :
330//=======================================================================
4f189102 331IntTools_FaceFace::IntTools_FaceFace()
7fd59977 332{
3f16d970 333 myIsDone=Standard_False;
7fd59977 334 myTangentFaces=Standard_False;
335 //
336 myHS1 = new GeomAdaptor_HSurface ();
337 myHS2 = new GeomAdaptor_HSurface ();
338 myTolReached2d=0.;
339 myTolReached3d=0.;
340 SetParameters(Standard_True, Standard_True, Standard_True, 1.e-07);
4f189102
P
341
342}
343//=======================================================================
344//function : SetContext
345//purpose :
346//=======================================================================
4e57c75e 347void IntTools_FaceFace::SetContext(const Handle(BOPInt_Context)& aContext)
4f189102
P
348{
349 myContext=aContext;
350}
351//=======================================================================
352//function : Context
353//purpose :
354//=======================================================================
4e57c75e 355const Handle(BOPInt_Context)& IntTools_FaceFace::Context()const
4f189102
P
356{
357 return myContext;
7fd59977 358}
359//=======================================================================
360//function : Face1
361//purpose :
362//=======================================================================
4f189102 363const TopoDS_Face& IntTools_FaceFace::Face1() const
7fd59977 364{
365 return myFace1;
366}
7fd59977 367//=======================================================================
368//function : Face2
369//purpose :
370//=======================================================================
4f189102 371const TopoDS_Face& IntTools_FaceFace::Face2() const
7fd59977 372{
373 return myFace2;
374}
7fd59977 375//=======================================================================
376//function : TangentFaces
377//purpose :
378//=======================================================================
4f189102 379Standard_Boolean IntTools_FaceFace::TangentFaces() const
7fd59977 380{
381 return myTangentFaces;
382}
383//=======================================================================
384//function : Points
385//purpose :
386//=======================================================================
4f189102 387const IntTools_SequenceOfPntOn2Faces& IntTools_FaceFace::Points() const
7fd59977 388{
389 return myPnts;
390}
391//=======================================================================
392//function : IsDone
393//purpose :
394//=======================================================================
4f189102 395Standard_Boolean IntTools_FaceFace::IsDone() const
7fd59977 396{
397 return myIsDone;
398}
399//=======================================================================
400//function : TolReached3d
401//purpose :
402//=======================================================================
4f189102 403Standard_Real IntTools_FaceFace::TolReached3d() const
7fd59977 404{
405 return myTolReached3d;
406}
407//=======================================================================
408//function : Lines
409//purpose : return lines of intersection
410//=======================================================================
4f189102 411const IntTools_SequenceOfCurves& IntTools_FaceFace::Lines() const
7fd59977 412{
4f189102
P
413 StdFail_NotDone_Raise_if
414 (!myIsDone,
415 "IntTools_FaceFace::Lines() => !myIntersector.IsDone()");
7fd59977 416 return mySeqOfCurve;
417}
7fd59977 418//=======================================================================
419//function : TolReached2d
420//purpose :
421//=======================================================================
4f189102 422Standard_Real IntTools_FaceFace::TolReached2d() const
7fd59977 423{
424 return myTolReached2d;
425}
426// =======================================================================
427// function: SetParameters
428//
429// =======================================================================
4f189102
P
430void IntTools_FaceFace::SetParameters(const Standard_Boolean ToApproxC3d,
431 const Standard_Boolean ToApproxC2dOnS1,
432 const Standard_Boolean ToApproxC2dOnS2,
433 const Standard_Real ApproximationTolerance)
7fd59977 434{
435 myApprox = ToApproxC3d;
436 myApprox1 = ToApproxC2dOnS1;
437 myApprox2 = ToApproxC2dOnS2;
438 myTolApprox = ApproximationTolerance;
439}
440//=======================================================================
441//function : SetList
442//purpose :
443//=======================================================================
7fd59977 444void IntTools_FaceFace::SetList(IntSurf_ListOfPntOn2S& aListOfPnts)
445{
446 myListOfPnts = aListOfPnts;
447}
448//=======================================================================
449//function : Perform
450//purpose : intersect surfaces of the faces
451//=======================================================================
0fc4f2e2
P
452 void IntTools_FaceFace::Perform(const TopoDS_Face& aF1,
453 const TopoDS_Face& aF2)
7fd59977 454{
0fc4f2e2
P
455 Standard_Boolean hasCone, RestrictLine, bTwoPlanes, bReverse;
456 Standard_Integer aNbLin, aNbPnts, i, NbLinPP;
7fd59977 457 Standard_Real TolArc, TolTang, Deflection, UVMaxStep;
458 Standard_Real umin, umax, vmin, vmax;
459 Standard_Real aTolF1, aTolF2;
460 GeomAbs_SurfaceType aType1, aType2;
461 Handle(Geom_Surface) S1, S2;
462 Handle(IntTools_TopolTool) dom1, dom2;
0fc4f2e2 463 BRepAdaptor_Surface aBAS1, aBAS2;
7fd59977 464 //
4f189102 465 if (myContext.IsNull()) {
4e57c75e 466 myContext=new BOPInt_Context;
4f189102
P
467 }
468 //
7fd59977 469 mySeqOfCurve.Clear();
7fd59977 470 myTolReached2d=0.;
471 myTolReached3d=0.;
7fd59977 472 myIsDone = Standard_False;
0fc4f2e2
P
473 myNbrestr=0;//?
474 hasCone = Standard_False;
475 bTwoPlanes = Standard_False;
476 //
477 myFace1=aF1;
478 myFace2=aF2;
479 //
480 aBAS1.Initialize(myFace1, Standard_False);
481 aBAS2.Initialize(myFace2, Standard_False);
482 aType1=aBAS1.GetType();
483 aType2=aBAS2.GetType();
484 //
0fc4f2e2
P
485 bReverse=SortTypes(aType1, aType2);
486 if (bReverse) {
487 myFace1=aF2;
488 myFace2=aF1;
489 aType1=aBAS2.GetType();
490 aType2=aBAS1.GetType();
491 //
492 if (myListOfPnts.Extent()) {
493 Standard_Real aU1,aV1,aU2,aV2;
494 IntSurf_ListIteratorOfListOfPntOn2S aItP2S;
495 //
496 aItP2S.Initialize(myListOfPnts);
497 for (; aItP2S.More(); aItP2S.Next()){
498 IntSurf_PntOn2S& aP2S=aItP2S.Value();
499 aP2S.Parameters(aU1,aV1,aU2,aV2);
500 aP2S.SetValue(aU2,aV2,aU1,aV1);
501 }
502 }
503 }
0fc4f2e2
P
504 //
505 S1=BRep_Tool::Surface(myFace1);
506 S2=BRep_Tool::Surface(myFace2);
7fd59977 507 //
0fc4f2e2
P
508 aTolF1=BRep_Tool::Tolerance(myFace1);
509 aTolF2=BRep_Tool::Tolerance(myFace2);
7fd59977 510 //
511 TolArc= aTolF1 + aTolF2;
512 TolTang = TolArc;
513 //
0fc4f2e2 514 NbLinPP = 0;
7fd59977 515 if(aType1==GeomAbs_Plane && aType2==GeomAbs_Plane){
516 bTwoPlanes = Standard_True;
517
0fc4f2e2 518 BRepTools::UVBounds(myFace1, umin, umax, vmin, vmax);
7fd59977 519 myHS1->ChangeSurface().Load(S1, umin, umax, vmin, vmax);
520 //
0fc4f2e2 521 BRepTools::UVBounds(myFace2, umin, umax, vmin, vmax);
7fd59977 522 myHS2->ChangeSurface().Load(S2, umin, umax, vmin, vmax);
523 Standard_Real TolAng = 1.e-8;
0fc4f2e2 524 PerformPlanes(myHS1, myHS2, TolAng, TolTang, myApprox1, myApprox2,
7fd59977 525 mySeqOfCurve, myTangentFaces);
526
527 myIsDone = Standard_True;
4f189102
P
528
529 if(!myTangentFaces) {
0fc4f2e2 530 //
4f189102
P
531 NbLinPP = mySeqOfCurve.Length();
532 if(NbLinPP) {
533 Standard_Real aTolFMax;
0fc4f2e2 534 //
4f189102
P
535 myTolReached3d = 1.e-7;
536 //
537 aTolFMax=Max(aTolF1, aTolF2);
538 //
539 if (aTolFMax>myTolReached3d) {
540 myTolReached3d=aTolFMax;
541 }
542 myTolReached2d = myTolReached3d;
543 //
544 if (bReverse) {
545 Handle(Geom2d_Curve) aC2D1, aC2D2;
546 //
547 aNbLin=mySeqOfCurve.Length();
548 for (i=1; i<=aNbLin; ++i) {
549 IntTools_Curve& aIC=mySeqOfCurve(i);
550 aC2D1=aIC.FirstCurve2d();
551 aC2D2=aIC.SecondCurve2d();
552 //
553 aIC.SetFirstCurve2d(aC2D2);
554 aIC.SetSecondCurve2d(aC2D1);
555 }
556 }
0fc4f2e2
P
557 }
558 }
7fd59977 559 return;
0fc4f2e2 560 }//if(aType1==GeomAbs_Plane && aType2==GeomAbs_Plane){
7fd59977 561 //
562 if (aType1==GeomAbs_Plane &&
563 (aType2==GeomAbs_Cylinder ||
564 aType2==GeomAbs_Cone ||
565 aType2==GeomAbs_Torus)) {
566 Standard_Real dU, dV;
567 // F1
0fc4f2e2 568 BRepTools::UVBounds(myFace1, umin, umax, vmin, vmax);
7fd59977 569 dU=0.1*(umax-umin);
570 dV=0.1*(vmax-vmin);
571 umin=umin-dU;
572 umax=umax+dU;
573 vmin=vmin-dV;
574 vmax=vmax+dV;
575 myHS1->ChangeSurface().Load(S1, umin, umax, vmin, vmax);
576 // F2
0fc4f2e2
P
577 BRepTools::UVBounds(myFace2, umin, umax, vmin, vmax);
578 CorrectSurfaceBoundaries(myFace2, (aTolF1 + aTolF2) * 2., umin, umax, vmin, vmax);
7fd59977 579 myHS2->ChangeSurface().Load(S2, umin, umax, vmin, vmax);
580 //
581 if( aType2==GeomAbs_Cone ) {
582 TolArc = 0.0001;
7fd59977 583 hasCone = Standard_True;
584 }
585 }
586 //
587 else if ((aType1==GeomAbs_Cylinder||
588 aType1==GeomAbs_Cone ||
589 aType1==GeomAbs_Torus) &&
590 aType2==GeomAbs_Plane) {
591 Standard_Real dU, dV;
592 //F1
0fc4f2e2
P
593 BRepTools::UVBounds(myFace1, umin, umax, vmin, vmax);
594 CorrectSurfaceBoundaries(myFace1, (aTolF1 + aTolF2) * 2., umin, umax, vmin, vmax);
7fd59977 595 myHS1->ChangeSurface().Load(S1, umin, umax, vmin, vmax);
596 // F2
0fc4f2e2 597 BRepTools::UVBounds(myFace2, umin, umax, vmin, vmax);
7fd59977 598 dU=0.1*(umax-umin);
599 dV=0.1*(vmax-vmin);
600 umin=umin-dU;
601 umax=umax+dU;
602 vmin=vmin-dV;
603 vmax=vmax+dV;
604 myHS2->ChangeSurface().Load(S2, umin, umax, vmin, vmax);
605 //
606 if( aType1==GeomAbs_Cone ) {
607 TolArc = 0.0001;
7fd59977 608 hasCone = Standard_True;
609 }
610 }
611
612 //
613 else {
0fc4f2e2 614 BRepTools::UVBounds(myFace1, umin, umax, vmin, vmax);
7fd59977 615 //
0fc4f2e2 616 CorrectSurfaceBoundaries(myFace1, (aTolF1 + aTolF2) * 2., umin, umax, vmin, vmax);
7fd59977 617 //
618 myHS1->ChangeSurface().Load(S1, umin, umax, vmin, vmax);
619 //
0fc4f2e2 620 BRepTools::UVBounds(myFace2, umin, umax, vmin, vmax);
7fd59977 621 //
0fc4f2e2 622 CorrectSurfaceBoundaries(myFace2, (aTolF1 + aTolF2) * 2., umin, umax, vmin, vmax);
7fd59977 623 //
624 myHS2->ChangeSurface().Load(S2, umin, umax, vmin, vmax);
625 }
626 //
627 dom1 = new IntTools_TopolTool(myHS1);
628 dom2 = new IntTools_TopolTool(myHS2);
629 //
630 myLConstruct.Load(dom1, dom2, myHS1, myHS2);
631 //
632 Deflection = (hasCone) ? 0.085 : 0.1;
633 UVMaxStep = 0.001;
634 //
0fc4f2e2
P
635 Tolerances(myHS1, myHS2, TolArc, TolTang, UVMaxStep, Deflection);
636 //
637 myIntersector.SetTolerances(TolArc, TolTang, UVMaxStep, Deflection);
7fd59977 638 //
639 RestrictLine = Standard_False;
640 //
641 if((myHS1->IsUClosed() && !myHS1->IsUPeriodic()) ||
642 (myHS1->IsVClosed() && !myHS1->IsVPeriodic()) ||
643 (myHS2->IsUClosed() && !myHS2->IsUPeriodic()) ||
644 (myHS2->IsVClosed() && !myHS2->IsVPeriodic())) {
645 RestrictLine = Standard_True;
646 }
647 //
648 if(((aType1 != GeomAbs_BSplineSurface) &&
649 (aType1 != GeomAbs_BezierSurface) &&
650 (aType1 != GeomAbs_OtherSurface)) &&
651 ((aType2 != GeomAbs_BSplineSurface) &&
652 (aType2 != GeomAbs_BezierSurface) &&
653 (aType2 != GeomAbs_OtherSurface))) {
654 RestrictLine = Standard_True;
655 //
656 if ((aType1 == GeomAbs_Torus) ||
657 (aType2 == GeomAbs_Torus) ) {
658 myListOfPnts.Clear();
659 }
660 }
661 //
662 if(!RestrictLine) {
663 TopExp_Explorer aExp;
664 //
665 for(i = 0; (!RestrictLine) && (i < 2); i++) {
666 const TopoDS_Face& aF=(!i) ? myFace1 : myFace2;
667 aExp.Init(aF, TopAbs_EDGE);
668 for(; aExp.More(); aExp.Next()) {
669 const TopoDS_Edge& aE=TopoDS::Edge(aExp.Current());
670 //
671 if(BRep_Tool::Degenerated(aE)) {
672 RestrictLine = Standard_True;
673 break;
674 }
675 }
676 }
677 }
678 //
679 myIntersector.Perform(myHS1, dom1, myHS2, dom2,
680 TolArc, TolTang,
681 myListOfPnts, RestrictLine);
682 //
683 myIsDone = myIntersector.IsDone();
684 if (myIsDone) {
685 myTangentFaces=myIntersector.TangentFaces();
686 if (myTangentFaces) {
687 return;
688 }
689 //
690 if(RestrictLine) {
691 myListOfPnts.Clear(); // to use LineConstructor
692 }
693 //
694 aNbLin = myIntersector.NbLines();
695 for (i=1; i<=aNbLin; ++i) {
696 MakeCurve(i, dom1, dom2);
697 }
698 //
699 ComputeTolReached3d();
700 //
0fc4f2e2
P
701 if (bReverse) {
702 Handle(Geom2d_Curve) aC2D1, aC2D2;
703 //
704 aNbLin=mySeqOfCurve.Length();
705 for (i=1; i<=aNbLin; ++i) {
706 IntTools_Curve& aIC=mySeqOfCurve(i);
707 aC2D1=aIC.FirstCurve2d();
708 aC2D2=aIC.SecondCurve2d();
709 //
710 aIC.SetFirstCurve2d(aC2D2);
711 aIC.SetSecondCurve2d(aC2D1);
712 }
713 }
0fc4f2e2
P
714 //
715 // Points
7fd59977 716 Standard_Real U1,V1,U2,V2;
717 IntTools_PntOnFace aPntOnF1, aPntOnF2;
0fc4f2e2 718 IntTools_PntOn2Faces aPntOn2Faces;
7fd59977 719 //
720 aNbPnts=myIntersector.NbPnts();
721 for (i=1; i<=aNbPnts; ++i) {
722 const IntSurf_PntOn2S& aISPnt=myIntersector.Point(i).PntOn2S();
723 const gp_Pnt& aPnt=aISPnt.Value();
724 aISPnt.Parameters(U1,V1,U2,V2);
0fc4f2e2
P
725 aPntOnF1.Init(myFace1, aPnt, U1, V1);
726 aPntOnF2.Init(myFace2, aPnt, U2, V2);
d10203e8 727 //
0fc4f2e2
P
728 if (!bReverse) {
729 aPntOn2Faces.SetP1(aPntOnF1);
730 aPntOn2Faces.SetP2(aPntOnF2);
731 }
732 else {
733 aPntOn2Faces.SetP2(aPntOnF1);
734 aPntOn2Faces.SetP1(aPntOnF2);
735 }
7fd59977 736 myPnts.Append(aPntOn2Faces);
737 }
738 //
739 }
740}
741//=======================================================================
742//function :ComputeTolReached3d
743//purpose :
744//=======================================================================
745 void IntTools_FaceFace::ComputeTolReached3d()
746{
747 Standard_Integer aNbLin;
748 GeomAbs_SurfaceType aType1, aType2;
749 //
750 aNbLin=myIntersector.NbLines();
37b6f439 751 if (!aNbLin) {
752 return;
753 }
754 //
7fd59977 755 aType1=myHS1->Surface().GetType();
756 aType2=myHS2->Surface().GetType();
757 //
4f189102
P
758 if (aType1==GeomAbs_Cylinder && aType2==GeomAbs_Cylinder) {
759 if (aNbLin==2){
760 Handle(IntPatch_Line) aIL1, aIL2;
761 IntPatch_IType aTL1, aTL2;
7fd59977 762 //
4f189102
P
763 aIL1=myIntersector.Line(1);
764 aIL2=myIntersector.Line(2);
765 aTL1=aIL1->ArcType();
766 aTL2=aIL2->ArcType();
767 if (aTL1==IntPatch_Lin && aTL2==IntPatch_Lin) {
768 Standard_Real aD, aDTresh, dTol;
769 gp_Lin aL1, aL2;
770 //
771 dTol=1.e-8;
772 aDTresh=1.5e-6;
773 //
774 aL1=Handle(IntPatch_GLine)::DownCast(aIL1)->Line();
775 aL2=Handle(IntPatch_GLine)::DownCast(aIL2)->Line();
776 aD=aL1.Distance(aL2);
777 aD=0.5*aD;
778 if (aD<aDTresh) {
779 myTolReached3d=aD+dTol;
780 }
781 return;
7fd59977 782 }
783 }
4f189102 784 //ZZ
37b6f439 785 if (aNbLin) {// Check the distances
786 Standard_Integer i, aNbP, j ;
575aec54 787 Standard_Real aT1, aT2, dT, aD2, aD2Max, aEps, aT11, aT12;
4f189102
P
788 //
789 aD2Max=0.;
0c5acd27 790 aNbP=10;
4f189102
P
791 aNbLin=mySeqOfCurve.Length();
792 //
793 for (i=1; i<=aNbLin; ++i) {
794 const IntTools_Curve& aIC=mySeqOfCurve(i);
795 const Handle(Geom_Curve)& aC3D=aIC.Curve();
796 const Handle(Geom2d_Curve)& aC2D1=aIC.FirstCurve2d();
797 const Handle(Geom2d_Curve)& aC2D2=aIC.SecondCurve2d();
798 //
799 if (aC3D.IsNull()) {
800 continue;
801 }
802 const Handle(Geom_BSplineCurve)& aBC=
803 Handle(Geom_BSplineCurve)::DownCast(aC3D);
804 if (aBC.IsNull()) {
805 continue;
806 }
807 //
808 aT1=aBC->FirstParameter();
809 aT2=aBC->LastParameter();
810 //
37b6f439 811 aEps=0.01*(aT2-aT1);
8e0115e4 812 dT=(aT2-aT1)/aNbP;
8e0115e4 813 for (j=1; j<aNbP; ++j) {
37b6f439 814 aT11=aT1+j*dT;
815 aT12=aT11+dT;
816 aD2=FindMaxSquareDistance(aT11, aT12, aEps, aC3D, aC2D1, aC2D2,
817 myHS1, myHS2, myFace1, myFace2, myContext);
4f189102
P
818 if (aD2>aD2Max) {
819 aD2Max=aD2;
820 }
37b6f439 821 }
4f189102
P
822 }//for (i=1; i<=aNbLin; ++i) {
823 //
824 myTolReached3d=sqrt(aD2Max);
37b6f439 825 }// if (aNbLin)
4f189102
P
826 }// if (aType1==GeomAbs_Cylinder && aType2==GeomAbs_Cylinder) {
827 //
0fc4f2e2 828 //904/G3 f
4f189102 829 else if (aType1==GeomAbs_Plane && aType2==GeomAbs_Plane) {
7fd59977 830 Standard_Real aTolF1, aTolF2, aTolFMax, aTolTresh;
831 //
832 aTolTresh=1.e-7;
833 //
834 aTolF1 = BRep_Tool::Tolerance(myFace1);
835 aTolF2 = BRep_Tool::Tolerance(myFace2);
836 aTolFMax=Max(aTolF1, aTolF2);
837 //
838 if (aTolFMax>aTolTresh) {
839 myTolReached3d=aTolFMax;
840 }
4f189102 841 }//if (aType1==GeomAbs_Plane && aType2==GeomAbs_Plane) {
0fc4f2e2 842 //t
7fd59977 843 //IFV Bug OCC20297
4f189102
P
844 else if((aType1 == GeomAbs_Cylinder && aType2 == GeomAbs_Plane) ||
845 (aType2 == GeomAbs_Cylinder && aType1 == GeomAbs_Plane)) {
7fd59977 846 if(aNbLin == 1) {
847 const Handle(IntPatch_Line)& aIL1 = myIntersector.Line(1);
848 if(aIL1->ArcType() == IntPatch_Circle) {
849 gp_Circ aCir = Handle(IntPatch_GLine)::DownCast(aIL1)->Circle();
850 gp_XYZ aCirDir = aCir.Axis().Direction().XYZ();
851 gp_XYZ aPlDir;
852 gp_Pln aPln;
853 if(aType1 == GeomAbs_Plane) {
854 aPln = myHS1->Surface().Plane();
855 }
856 else {
857 aPln = myHS2->Surface().Plane();
858 }
859 aPlDir = aPln.Axis().Direction().XYZ();
860 Standard_Real cs = aCirDir*aPlDir;
861 if(cs < 0.) aPlDir.Reverse();
862 Standard_Real eps = 1.e-14;
863 if(!aPlDir.IsEqual(aCirDir, eps)) {
864 Standard_Integer aNbP = 11;
c6541a0c
D
865 Standard_Real dt = 2.*M_PI / (aNbP - 1), t;
866 for(t = 0.; t < 2.*M_PI; t += dt) {
7fd59977 867 Standard_Real d = aPln.Distance(ElCLib::Value(t, aCir));
868 if(myTolReached3d < d) myTolReached3d = d;
869 }
870 myTolReached3d *= 1.1;
871 }
872 } //aIL1->ArcType() == IntPatch_Circle
873 } //aNbLin == 1
4f189102 874 } // aType1 == GeomAbs_Cylinder && aType2 == GeomAbs_Plane)
7fd59977 875 //End IFV Bug OCC20297
0fc4f2e2 876 //
4f189102
P
877 else if ((aType1==GeomAbs_Plane && aType2==GeomAbs_Torus) ||
878 (aType2==GeomAbs_Plane && aType1==GeomAbs_Torus)) {
0fc4f2e2
P
879 aNbLin=mySeqOfCurve.Length();
880 if (aNbLin!=1) {
881 return;
882 }
883 //
884 Standard_Integer i, aNbP;
885 Standard_Real aT, aT1, aT2, dT, aUT, aVT, aUP, aVP;
886 Standard_Real aDP, aDT, aDmax;
887 gp_Pln aPln;
888 gp_Torus aTorus;
889 gp_Pnt aP, aPP, aPT;
890 //
891 const IntTools_Curve& aIC=mySeqOfCurve(1);
892 const Handle(Geom_Curve)& aC3D=aIC.Curve();
4f189102
P
893 const Handle(Geom_BSplineCurve)& aBS=
894 Handle(Geom_BSplineCurve)::DownCast(aC3D);
0fc4f2e2
P
895 if (aBS.IsNull()) {
896 return;
897 }
898 //
899 aT1=aBS->FirstParameter();
900 aT2=aBS->LastParameter();
901 //
902 aPln =(aType1==GeomAbs_Plane) ? myHS1->Plane() : myHS2->Plane();
903 aTorus=(aType1==GeomAbs_Plane) ? myHS2->Torus() : myHS1->Torus();
904 //
905 aDmax=-1.;
906 aNbP=11;
907 dT=(aT2-aT1)/(aNbP-1);
908 for (i=0; i<aNbP; ++i) {
909 aT=aT1+i*dT;
910 if (i==aNbP-1) {
911 aT=aT2;
912 }
913 //
914 aC3D->D0(aT, aP);
915 //
916 ElSLib::Parameters(aPln, aP, aUP, aVP);
917 aPP=ElSLib::Value(aUP, aVP, aPln);
918 aDP=aP.SquareDistance(aPP);
919 if (aDP>aDmax) {
920 aDmax=aDP;
921 }
922 //
923 ElSLib::Parameters(aTorus, aP, aUT, aVT);
924 aPT=ElSLib::Value(aUT, aVT, aTorus);
925 aDT=aP.SquareDistance(aPT);
926 if (aDT>aDmax) {
927 aDmax=aDT;
928 }
929 }
930 //
931 if (aDmax > myTolReached3d*myTolReached3d) {
932 myTolReached3d=sqrt(aDmax);
933 myTolReached3d=1.1*myTolReached3d;
934 }
935 }// if ((aType1==GeomAbs_Plane && aType2==GeomAbs_Torus) ||
a9f7b6b5 936 //
4f189102
P
937 else if ((aType1==GeomAbs_SurfaceOfRevolution && aType2==GeomAbs_Cylinder) ||
938 (aType2==GeomAbs_SurfaceOfRevolution && aType1==GeomAbs_Cylinder)) {
d10203e8 939 Standard_Integer i, j, aNbP;
4f189102 940 Standard_Real aT, aT1, aT2, dT, aD2max, aD2;
d10203e8
P
941 //
942 aNbLin=mySeqOfCurve.Length();
4f189102 943 aD2max=0.;
d10203e8
P
944 aNbP=11;
945 //
946 for (i=1; i<=aNbLin; ++i) {
947 const IntTools_Curve& aIC=mySeqOfCurve(i);
948 const Handle(Geom_Curve)& aC3D=aIC.Curve();
949 const Handle(Geom2d_Curve)& aC2D1=aIC.FirstCurve2d();
950 const Handle(Geom2d_Curve)& aC2D2=aIC.SecondCurve2d();
951 //
952 if (aC3D.IsNull()) {
953 continue;
954 }
4f189102
P
955 const Handle(Geom_BSplineCurve)& aBC=
956 Handle(Geom_BSplineCurve)::DownCast(aC3D);
d10203e8
P
957 if (aBC.IsNull()) {
958 return;
959 }
960 //
961 aT1=aBC->FirstParameter();
962 aT2=aBC->LastParameter();
963 //
964 dT=(aT2-aT1)/(aNbP-1);
965 for (j=0; j<aNbP; ++j) {
966 aT=aT1+j*dT;
967 if (j==aNbP-1) {
968 aT=aT2;
969 }
970 //
4f189102
P
971 aD2=MaxSquareDistance(aT, aC3D, aC2D1, aC2D2,
972 myHS1, myHS2, myFace1, myFace2, myContext);
973 if (aD2>aD2max) {
974 aD2max=aD2;
d10203e8
P
975 }
976 }//for (j=0; j<aNbP; ++j) {
37b6f439 977
d10203e8
P
978 }//for (i=1; i<=aNbLin; ++i) {
979 //
4f189102
P
980 aD2=myTolReached3d*myTolReached3d;
981 if (aD2max > aD2) {
982 myTolReached3d=sqrt(aD2max);
d10203e8 983 }
a9f7b6b5 984 }//if((aType1==GeomAbs_SurfaceOfRevolution ...
0c5acd27 985 else if ((aType1==GeomAbs_Plane && aType2==GeomAbs_Sphere) ||
9c9a29ea 986 (aType2==GeomAbs_Plane && aType1==GeomAbs_Sphere)) {
0c5acd27 987 Standard_Integer i, j, aNbP;
9c9a29ea 988 Standard_Real aT1, aT2, dT, aD2max, aD2, aEps, aT11, aT12;
0c5acd27 989 //
990 aNbLin=mySeqOfCurve.Length();
991 aD2max=0.;
992 aNbP=10;
993 //
994 for (i=1; i<=aNbLin; ++i) {
995 const IntTools_Curve& aIC=mySeqOfCurve(i);
996 const Handle(Geom_Curve)& aC3D=aIC.Curve();
997 const Handle(Geom2d_Curve)& aC2D1=aIC.FirstCurve2d();
998 const Handle(Geom2d_Curve)& aC2D2=aIC.SecondCurve2d();
999 //
1000 const Handle(Geom2d_BSplineCurve)& aBC2D1=
9c9a29ea 1001 Handle(Geom2d_BSplineCurve)::DownCast(aC2D1);
0c5acd27 1002 const Handle(Geom2d_BSplineCurve)& aBC2D2=
9c9a29ea 1003 Handle(Geom2d_BSplineCurve)::DownCast(aC2D2);
0c5acd27 1004 //
1005 if (aBC2D1.IsNull() && aBC2D2.IsNull()) {
9c9a29ea 1006 return;
0c5acd27 1007 }
1008 //
1009 if (!aBC2D1.IsNull()) {
9c9a29ea 1010 aT1=aBC2D1->FirstParameter();
1011 aT2=aBC2D1->LastParameter();
0c5acd27 1012 }
1013 else {
9c9a29ea 1014 aT1=aBC2D2->FirstParameter();
1015 aT2=aBC2D2->LastParameter();
0c5acd27 1016 }
1017 //
1018 aEps=0.01*(aT2-aT1);
9c9a29ea 1019 dT=(aT2-aT1)/aNbP;
0c5acd27 1020 for (j=0; j<aNbP; ++j) {
9c9a29ea 1021 aT11=aT1+j*dT;
1022 aT12=aT11+dT;
1023 if (j==aNbP-1) {
1024 aT12=aT2;
1025 }
1026 //
1027 aD2=FindMaxSquareDistance(aT11, aT12, aEps, aC3D, aC2D1, aC2D2,
1028 myHS1, myHS2, myFace1, myFace2, myContext);
1029 if (aD2>aD2max) {
1030 aD2max=aD2;
1031 }
0c5acd27 1032 }//for (j=0; j<aNbP; ++j) {
1033
1034 }//for (i=1; i<=aNbLin; ++i) {
1035 //
1036 aD2=myTolReached3d*myTolReached3d;
1037 if (aD2max > aD2) {
1038 myTolReached3d=sqrt(aD2max);
1039 }
1040 }//else if ((aType1==GeomAbs_Plane && aType2==GeomAbs_Sphere) ...
4e57c75e 1041 else if (!myApprox) {
1042 Standard_Integer i, aNbP, j ;
1043 Standard_Real aT1, aT2, dT, aD2, aD2Max, aEps, aT11, aT12;
1044 //
1045 aD2Max=0.;
1046 aNbLin=mySeqOfCurve.Length();
1047 //
1048 for (i=1; i<=aNbLin; ++i) {
1049 const IntTools_Curve& aIC=mySeqOfCurve(i);
1050 const Handle(Geom_Curve)& aC3D=aIC.Curve();
1051 const Handle(Geom2d_Curve)& aC2D1=aIC.FirstCurve2d();
1052 const Handle(Geom2d_Curve)& aC2D2=aIC.SecondCurve2d();
1053 //
1054 if (aC3D.IsNull()) {
1055 continue;
1056 }
1057 const Handle(Geom_BSplineCurve)& aBC=
1058 Handle(Geom_BSplineCurve)::DownCast(aC3D);
1059 if (aBC.IsNull()) {
1060 continue;
1061 }
1062 //
1063 aT1=aBC->FirstParameter();
1064 aT2=aBC->LastParameter();
1065 //
1066 aEps=0.0001*(aT2-aT1);
1067 aNbP=11;
1068 dT=(aT2-aT1)/aNbP;
1069 for (j=1; j<aNbP-1; ++j) {
1070 aT11=aT1+j*dT;
1071 aT12=aT11+dT;
1072 aD2=FindMaxSquareDistance(aT11, aT12, aEps, aC3D, aC2D1, aC2D2,
1073 myHS1, myHS2, myFace1, myFace2, myContext);
1074 if (aD2>aD2Max) {
1075 aD2Max=aD2;
1076 }
1077 }
1078 }//for (i=1; i<=aNbLin; ++i) {
1079 myTolReached3d=sqrt(aD2Max);
1080 }
1081 //modified by NIZNHY-PKV Thu Aug 30 13:31:12 2012t
7fd59977 1082}
1083//=======================================================================
1084//function : MakeCurve
1085//purpose :
1086//=======================================================================
1087 void IntTools_FaceFace::MakeCurve(const Standard_Integer Index,
1088 const Handle(Adaptor3d_TopolTool)& dom1,
1089 const Handle(Adaptor3d_TopolTool)& dom2)
1090{
989341c5 1091 Standard_Boolean bDone, rejectSurface, reApprox, bAvoidLineConstructor,
1092 bPCurvesOk;
7fd59977 1093 Standard_Boolean ok;
1094 Standard_Integer i, j, aNbParts;
1095 Standard_Real fprm, lprm;
1096 Standard_Real Tolpc;
1097 Handle(IntPatch_Line) L;
1098 IntPatch_IType typl;
1099 Handle(Geom_Curve) newc;
1100 //
1101 const Standard_Real TOLCHECK =0.0000001;
1102 const Standard_Real TOLANGCHECK=0.1;
1103 //
1104 rejectSurface = Standard_False;
1105 reApprox = Standard_False;
989341c5 1106 //
1107 bPCurvesOk = Standard_True;
7fd59977 1108
1109 reapprox:;
1110
1111 Tolpc = myTolApprox;
1112 bAvoidLineConstructor = Standard_False;
1113 L = myIntersector.Line(Index);
1114 typl = L->ArcType();
1115 //
1116 if(typl==IntPatch_Walking) {
1117 Handle(IntPatch_Line) anewL;
1118 //
1119 const Handle(IntPatch_WLine)& aWLine=
1120 Handle(IntPatch_WLine)::DownCast(L);
4f189102
P
1121 //DEBf
1122 //DumpWLine(aWLine);
1123 //DEBt
7fd59977 1124 anewL = ComputePurgedWLine(aWLine);
1125 if(anewL.IsNull()) {
1126 return;
1127 }
1128 L = anewL;
4f189102
P
1129 //DEBf
1130 /*
1131 { const Handle(IntPatch_WLine)& aWLineX=
1132 Handle(IntPatch_WLine)::DownCast(L);
1133 DumpWLine(aWLineX);
1134 }
1135 */
1136 //DEBt
7fd59977 1137 //
1138 if(!myListOfPnts.IsEmpty()) {
1139 bAvoidLineConstructor = Standard_True;
1140 }
1141
1142 Standard_Integer nbp = aWLine->NbPnts();
1143 const IntSurf_PntOn2S& p1 = aWLine->Point(1);
1144 const IntSurf_PntOn2S& p2 = aWLine->Point(nbp);
1145
1146 const gp_Pnt& P1 = p1.Value();
1147 const gp_Pnt& P2 = p2.Value();
1148
1149 if(P1.SquareDistance(P2) < 1.e-14) {
1150 bAvoidLineConstructor = Standard_False;
1151 }
1152
1153 }
1154 //
1155 // Line Constructor
1156 if(!bAvoidLineConstructor) {
1157 myLConstruct.Perform(L);
1158 //
1159 bDone=myLConstruct.IsDone();
1160 aNbParts=myLConstruct.NbParts();
1161 if (!bDone|| !aNbParts) {
1162 return;
1163 }
1164 }
1165 // Do the Curve
1166
1167
1168 typl=L->ArcType();
1169 switch (typl) {
1170 //########################################
1171 // Line, Parabola, Hyperbola
1172 //########################################
1173 case IntPatch_Lin:
1174 case IntPatch_Parabola:
1175 case IntPatch_Hyperbola: {
1176 if (typl == IntPatch_Lin) {
1177 newc =
1178 new Geom_Line (Handle(IntPatch_GLine)::DownCast(L)->Line());
1179 }
1180
1181 else if (typl == IntPatch_Parabola) {
1182 newc =
1183 new Geom_Parabola(Handle(IntPatch_GLine)::DownCast(L)->Parabola());
1184 }
1185
1186 else if (typl == IntPatch_Hyperbola) {
1187 newc =
1188 new Geom_Hyperbola (Handle(IntPatch_GLine)::DownCast(L)->Hyperbola());
1189 }
1190 //
1191 // myTolReached3d
1192 if (typl == IntPatch_Lin) {
1193 TolR3d (myFace1, myFace2, myTolReached3d);
1194 }
1195 //
1196 aNbParts=myLConstruct.NbParts();
1197 for (i=1; i<=aNbParts; i++) {
1198 myLConstruct.Part(i, fprm, lprm);
1199
1200 if (!Precision::IsNegativeInfinite(fprm) &&
1201 !Precision::IsPositiveInfinite(lprm)) {
1202 //
1203 IntTools_Curve aCurve;
1204 //
1205 Handle(Geom_TrimmedCurve) aCT3D=new Geom_TrimmedCurve(newc, fprm, lprm);
1206 aCurve.SetCurve(aCT3D);
1207 if (typl == IntPatch_Parabola) {
1208 Standard_Real aTolF1, aTolF2, aTolBase;
1209
1210 aTolF1 = BRep_Tool::Tolerance(myFace1);
1211 aTolF2 = BRep_Tool::Tolerance(myFace2);
1212 aTolBase=aTolF1+aTolF2;
1213 myTolReached3d=IntTools_Tools::CurveTolerance(aCT3D, aTolBase);
1214 }
1215 //
1216 aCurve.SetCurve(new Geom_TrimmedCurve(newc, fprm, lprm));
1217 if(myApprox1) {
1218 Handle (Geom2d_Curve) C2d;
1219 BuildPCurves(fprm, lprm, Tolpc, myHS1->ChangeSurface().Surface(), newc, C2d);
1220 if(Tolpc>myTolReached2d || myTolReached2d==0.) {
1221 myTolReached2d=Tolpc;
1222 }
1223 //
1224 aCurve.SetFirstCurve2d(new Geom2d_TrimmedCurve(C2d,fprm,lprm));
1225 }
1226 else {
1227 Handle(Geom2d_BSplineCurve) H1;
1228 //
1229 aCurve.SetFirstCurve2d(H1);
1230 }
1231
1232 if(myApprox2) {
1233 Handle (Geom2d_Curve) C2d;
1234 BuildPCurves(fprm,lprm,Tolpc,myHS2->ChangeSurface().Surface(),newc,C2d);
1235 if(Tolpc>myTolReached2d || myTolReached2d==0.) {
1236 myTolReached2d=Tolpc;
1237 }
1238 //
1239 aCurve.SetSecondCurve2d(new Geom2d_TrimmedCurve(C2d,fprm,lprm));
1240 }
1241 else {
1242 Handle(Geom2d_BSplineCurve) H1;
1243 //
1244 aCurve.SetSecondCurve2d(H1);
1245 }
1246 mySeqOfCurve.Append(aCurve);
1247 } // end of if (!Precision::IsNegativeInfinite(fprm) && !Precision::IsPositiveInfinite(lprm))
1248
1249 else {
0fc4f2e2 1250 // on regarde si on garde
7fd59977 1251 //
1252 Standard_Boolean bFNIt, bLPIt;
1253 Standard_Real aTestPrm, dT=100.;
1254
1255 bFNIt=Precision::IsNegativeInfinite(fprm);
1256 bLPIt=Precision::IsPositiveInfinite(lprm);
1257
1258 aTestPrm=0.;
1259
1260 if (bFNIt && !bLPIt) {
1261 aTestPrm=lprm-dT;
1262 }
1263 else if (!bFNIt && bLPIt) {
1264 aTestPrm=fprm+dT;
1265 }
1266
1267 gp_Pnt ptref(newc->Value(aTestPrm));
1268 //
1269
1270 Standard_Real u1, v1, u2, v2, Tol;
1271
1272 Tol = Precision::Confusion();
1273 Parameters(myHS1, myHS2, ptref, u1, v1, u2, v2);
1274 ok = (dom1->Classify(gp_Pnt2d(u1, v1), Tol) != TopAbs_OUT);
1275 if(ok) {
1276 ok = (dom2->Classify(gp_Pnt2d(u2,v2),Tol) != TopAbs_OUT);
1277 }
1278 if (ok) {
1279 Handle(Geom2d_BSplineCurve) H1;
1280 mySeqOfCurve.Append(IntTools_Curve(newc, H1, H1));
1281 }
1282 }
1283 }// end of for (i=1; i<=myLConstruct.NbParts(); i++)
1284 }// case IntPatch_Lin: case IntPatch_Parabola: case IntPatch_Hyperbola:
1285 break;
1286
1287 //########################################
1288 // Circle and Ellipse
1289 //########################################
1290 case IntPatch_Circle:
1291 case IntPatch_Ellipse: {
1292
1293 if (typl == IntPatch_Circle) {
1294 newc = new Geom_Circle
1295 (Handle(IntPatch_GLine)::DownCast(L)->Circle());
1296 }
1297 else { //IntPatch_Ellipse
1298 newc = new Geom_Ellipse
1299 (Handle(IntPatch_GLine)::DownCast(L)->Ellipse());
1300 }
1301 //
1302 // myTolReached3d
1303 TolR3d (myFace1, myFace2, myTolReached3d);
1304 //
1305 aNbParts=myLConstruct.NbParts();
1306 //
1307 Standard_Real aPeriod, aNul;
1308 TColStd_SequenceOfReal aSeqFprm, aSeqLprm;
1309
1310 aNul=0.;
c6541a0c 1311 aPeriod=M_PI+M_PI;
7fd59977 1312
1313 for (i=1; i<=aNbParts; i++) {
1314 myLConstruct.Part(i, fprm, lprm);
1315
1316 if (fprm < aNul && lprm > aNul) {
1317 // interval that goes through 0. is divided on two intervals;
1318 while (fprm<aNul || fprm>aPeriod) fprm=fprm+aPeriod;
1319 while (lprm<aNul || lprm>aPeriod) lprm=lprm+aPeriod;
1320 //
1321 if((aPeriod - fprm) > Tolpc) {
1322 aSeqFprm.Append(fprm);
1323 aSeqLprm.Append(aPeriod);
1324 }
1325 else {
1326 gp_Pnt P1 = newc->Value(fprm);
1327 gp_Pnt P2 = newc->Value(aPeriod);
1328 Standard_Real aTolDist = BRep_Tool::Tolerance(myFace1) + BRep_Tool::Tolerance(myFace2);
1329 aTolDist = (myTolReached3d > aTolDist) ? myTolReached3d : aTolDist;
1330
1331 if(P1.Distance(P2) > aTolDist) {
1332 Standard_Real anewpar = fprm;
1333
4f189102 1334 if(ParameterOutOfBoundary(fprm, newc, myFace1, myFace2, lprm, Standard_False, anewpar, myContext)) {
7fd59977 1335 fprm = anewpar;
1336 }
1337 aSeqFprm.Append(fprm);
1338 aSeqLprm.Append(aPeriod);
1339 }
1340 }
1341
1342 //
1343 if((lprm - aNul) > Tolpc) {
1344 aSeqFprm.Append(aNul);
1345 aSeqLprm.Append(lprm);
1346 }
1347 else {
1348 gp_Pnt P1 = newc->Value(aNul);
1349 gp_Pnt P2 = newc->Value(lprm);
1350 Standard_Real aTolDist = BRep_Tool::Tolerance(myFace1) + BRep_Tool::Tolerance(myFace2);
1351 aTolDist = (myTolReached3d > aTolDist) ? myTolReached3d : aTolDist;
1352
1353 if(P1.Distance(P2) > aTolDist) {
1354 Standard_Real anewpar = lprm;
1355
4f189102 1356 if(ParameterOutOfBoundary(lprm, newc, myFace1, myFace2, fprm, Standard_True, anewpar, myContext)) {
7fd59977 1357 lprm = anewpar;
1358 }
1359 aSeqFprm.Append(aNul);
1360 aSeqLprm.Append(lprm);
1361 }
1362 }
1363 }
1364 else {
1365 // usual interval
1366 aSeqFprm.Append(fprm);
1367 aSeqLprm.Append(lprm);
1368 }
1369 }
1370
1371 //
1372 aNbParts=aSeqFprm.Length();
1373 for (i=1; i<=aNbParts; i++) {
1374 fprm=aSeqFprm(i);
1375 lprm=aSeqLprm(i);
1376 //
1377 Standard_Real aRealEpsilon=RealEpsilon();
c6541a0c 1378 if (Abs(fprm) > aRealEpsilon || Abs(lprm-2.*M_PI) > aRealEpsilon) {
7fd59977 1379 //==============================================
1380 ////
1381 IntTools_Curve aCurve;
1382 Handle(Geom_TrimmedCurve) aTC3D=new Geom_TrimmedCurve(newc,fprm,lprm);
1383 aCurve.SetCurve(aTC3D);
1384 fprm=aTC3D->FirstParameter();
1385 lprm=aTC3D->LastParameter ();
1386 ////
1387 if (typl == IntPatch_Circle || typl == IntPatch_Ellipse) {////
1388 if(myApprox1) {
1389 Handle (Geom2d_Curve) C2d;
1390 BuildPCurves(fprm,lprm,Tolpc,myHS1->ChangeSurface().Surface(),newc,C2d);
1391 if(Tolpc>myTolReached2d || myTolReached2d==0) {
1392 myTolReached2d=Tolpc;
1393 }
1394 //
1395 aCurve.SetFirstCurve2d(C2d);
1396 }
1397 else { ////
1398 Handle(Geom2d_BSplineCurve) H1;
1399 aCurve.SetFirstCurve2d(H1);
1400 }
1401
1402
1403 if(myApprox2) {
1404 Handle (Geom2d_Curve) C2d;
1405 BuildPCurves(fprm,lprm,Tolpc,myHS2->ChangeSurface().Surface(),newc,C2d);
1406 if(Tolpc>myTolReached2d || myTolReached2d==0) {
1407 myTolReached2d=Tolpc;
1408 }
1409 //
1410 aCurve.SetSecondCurve2d(C2d);
1411 }
1412 else {
1413 Handle(Geom2d_BSplineCurve) H1;
1414 aCurve.SetSecondCurve2d(H1);
1415 }
1416 }
1417
1418 else {
1419 Handle(Geom2d_BSplineCurve) H1;
1420 aCurve.SetFirstCurve2d(H1);
1421 aCurve.SetSecondCurve2d(H1);
1422 }
1423 mySeqOfCurve.Append(aCurve);
1424 //==============================================
c6541a0c 1425 } //if (Abs(fprm) > RealEpsilon() || Abs(lprm-2.*M_PI) > RealEpsilon())
7fd59977 1426
1427 else {
1428 // on regarde si on garde
1429 //
1430 if (aNbParts==1) {
c6541a0c
D
1431// if (Abs(fprm) < RealEpsilon() && Abs(lprm-2.*M_PI) < RealEpsilon()) {
1432 if (Abs(fprm) <= aRealEpsilon && Abs(lprm-2.*M_PI) <= aRealEpsilon) {
7fd59977 1433 IntTools_Curve aCurve;
1434 Handle(Geom_TrimmedCurve) aTC3D=new Geom_TrimmedCurve(newc,fprm,lprm);
1435 aCurve.SetCurve(aTC3D);
1436 fprm=aTC3D->FirstParameter();
1437 lprm=aTC3D->LastParameter ();
1438
1439 if(myApprox1) {
1440 Handle (Geom2d_Curve) C2d;
1441 BuildPCurves(fprm,lprm,Tolpc,myHS1->ChangeSurface().Surface(),newc,C2d);
1442 if(Tolpc>myTolReached2d || myTolReached2d==0) {
1443 myTolReached2d=Tolpc;
1444 }
1445 //
1446 aCurve.SetFirstCurve2d(C2d);
1447 }
1448 else { ////
1449 Handle(Geom2d_BSplineCurve) H1;
1450 aCurve.SetFirstCurve2d(H1);
1451 }
1452
1453 if(myApprox2) {
1454 Handle (Geom2d_Curve) C2d;
1455 BuildPCurves(fprm,lprm,Tolpc,myHS2->ChangeSurface().Surface(),newc,C2d);
1456 if(Tolpc>myTolReached2d || myTolReached2d==0) {
1457 myTolReached2d=Tolpc;
1458 }
1459 //
1460 aCurve.SetSecondCurve2d(C2d);
1461 }
1462 else {
1463 Handle(Geom2d_BSplineCurve) H1;
1464 aCurve.SetSecondCurve2d(H1);
1465 }
1466 mySeqOfCurve.Append(aCurve);
1467 break;
1468 }
1469 }
1470 //
1471 Standard_Real aTwoPIdiv17, u1, v1, u2, v2, Tol;
1472
c6541a0c 1473 aTwoPIdiv17=2.*M_PI/17.;
7fd59977 1474
1475 for (j=0; j<=17; j++) {
1476 gp_Pnt ptref (newc->Value (j*aTwoPIdiv17));
1477 Tol = Precision::Confusion();
1478
1479 Parameters(myHS1, myHS2, ptref, u1, v1, u2, v2);
1480 ok = (dom1->Classify(gp_Pnt2d(u1,v1),Tol) != TopAbs_OUT);
1481 if(ok) {
1482 ok = (dom2->Classify(gp_Pnt2d(u2,v2),Tol) != TopAbs_OUT);
1483 }
1484 if (ok) {
1485 IntTools_Curve aCurve;
1486 aCurve.SetCurve(newc);
1487 //==============================================
1488 if (typl == IntPatch_Circle || typl == IntPatch_Ellipse) {
1489
1490 if(myApprox1) {
1491 Handle (Geom2d_Curve) C2d;
1492 BuildPCurves(fprm, lprm, Tolpc, myHS1->ChangeSurface().Surface(), newc, C2d);
1493 if(Tolpc>myTolReached2d || myTolReached2d==0) {
1494 myTolReached2d=Tolpc;
1495 }
1496 //
1497 aCurve.SetFirstCurve2d(C2d);
1498 }
1499 else {
1500 Handle(Geom2d_BSplineCurve) H1;
1501 aCurve.SetFirstCurve2d(H1);
1502 }
1503
1504 if(myApprox2) {
1505 Handle (Geom2d_Curve) C2d;
1506 BuildPCurves(fprm, lprm, Tolpc,myHS2->ChangeSurface().Surface(), newc, C2d);
1507 if(Tolpc>myTolReached2d || myTolReached2d==0) {
1508 myTolReached2d=Tolpc;
1509 }
1510 //
1511 aCurve.SetSecondCurve2d(C2d);
1512 }
1513
1514 else {
1515 Handle(Geom2d_BSplineCurve) H1;
1516 aCurve.SetSecondCurve2d(H1);
1517 }
1518 }// end of if (typl == IntPatch_Circle || typl == IntPatch_Ellipse)
1519
1520 else {
1521 Handle(Geom2d_BSplineCurve) H1;
1522 //
1523 aCurve.SetFirstCurve2d(H1);
1524 aCurve.SetSecondCurve2d(H1);
1525 }
1526 //==============================================
1527 //
1528 mySeqOfCurve.Append(aCurve);
1529 break;
1530
1531 }// end of if (ok) {
1532 }// end of for (Standard_Integer j=0; j<=17; j++)
0fc4f2e2 1533 }// end of else { on regarde si on garde
7fd59977 1534 }// for (i=1; i<=myLConstruct.NbParts(); i++)
1535 }// IntPatch_Circle: IntPatch_Ellipse:
1536 break;
1537
1538 case IntPatch_Analytic: {
1539 IntSurf_Quadric quad1,quad2;
1540 GeomAbs_SurfaceType typs = myHS1->Surface().GetType();
1541
1542 switch (typs) {
1543 case GeomAbs_Plane:
1544 quad1.SetValue(myHS1->Surface().Plane());
1545 break;
1546 case GeomAbs_Cylinder:
1547 quad1.SetValue(myHS1->Surface().Cylinder());
1548 break;
1549 case GeomAbs_Cone:
1550 quad1.SetValue(myHS1->Surface().Cone());
1551 break;
1552 case GeomAbs_Sphere:
1553 quad1.SetValue(myHS1->Surface().Sphere());
1554 break;
1555 default:
1556 Standard_ConstructionError::Raise("GeomInt_IntSS::MakeCurve 1");
1557 }
1558
1559 typs = myHS2->Surface().GetType();
1560
1561 switch (typs) {
1562 case GeomAbs_Plane:
1563 quad2.SetValue(myHS2->Surface().Plane());
1564 break;
1565 case GeomAbs_Cylinder:
1566 quad2.SetValue(myHS2->Surface().Cylinder());
1567 break;
1568 case GeomAbs_Cone:
1569 quad2.SetValue(myHS2->Surface().Cone());
1570 break;
1571 case GeomAbs_Sphere:
1572 quad2.SetValue(myHS2->Surface().Sphere());
1573 break;
1574 default:
1575 Standard_ConstructionError::Raise("GeomInt_IntSS::MakeCurve 2");
1576 }
1577 //
1578 //=========
1579 IntPatch_ALineToWLine convert (quad1, quad2);
1580
1581 if (!myApprox) {
1582 aNbParts=myLConstruct.NbParts();
1583 for (i=1; i<=aNbParts; i++) {
1584 myLConstruct.Part(i, fprm, lprm);
1585 Handle(IntPatch_WLine) WL =
1586 convert.MakeWLine(Handle(IntPatch_ALine)::DownCast(L), fprm, lprm);
1587 //
1588 Handle(Geom2d_BSplineCurve) H1;
1589 Handle(Geom2d_BSplineCurve) H2;
1590
1591 if(myApprox1) {
1592 H1 = MakeBSpline2d(WL, 1, WL->NbPnts(), Standard_True);
1593 }
1594
1595 if(myApprox2) {
1596 H2 = MakeBSpline2d(WL, 1, WL->NbPnts(), Standard_False);
1597 }
1598 //
1599 mySeqOfCurve.Append(IntTools_Curve(MakeBSpline(WL,1,WL->NbPnts()), H1, H2));
1600 }
1601 } // if (!myApprox)
1602
1603 else { // myApprox=TRUE
1604 GeomInt_WLApprox theapp3d;
1605 //
1606 Standard_Real tol2d = myTolApprox;
1607 //
1608 theapp3d.SetParameters(myTolApprox, tol2d, 4, 8, 0, Standard_True);
1609
1610 aNbParts=myLConstruct.NbParts();
1611 for (i=1; i<=aNbParts; i++) {
1612 myLConstruct.Part(i, fprm, lprm);
1613 Handle(IntPatch_WLine) WL =
1614 convert.MakeWLine(Handle(IntPatch_ALine):: DownCast(L),fprm,lprm);
1615
1616 theapp3d.Perform(myHS1,myHS2,WL,Standard_True,myApprox1,myApprox2, 1, WL->NbPnts());
1617
1618 if (!theapp3d.IsDone()) {
1619 //
1620 Handle(Geom2d_BSplineCurve) H1;
1621 Handle(Geom2d_BSplineCurve) H2;
1622
1623 if(myApprox1) {
1624 H1 = MakeBSpline2d(WL, 1, WL->NbPnts(), Standard_True);
1625 }
1626
1627 if(myApprox2) {
1628 H2 = MakeBSpline2d(WL, 1, WL->NbPnts(), Standard_False);
1629 }
1630 //
1631 mySeqOfCurve.Append(IntTools_Curve(MakeBSpline(WL,1,WL->NbPnts()), H1, H2));
1632 }
1633
1634 else {
1635 if(myApprox1 || myApprox2) {
1636 if( theapp3d.TolReached2d()>myTolReached2d || myTolReached2d==0) {
1637 myTolReached2d = theapp3d.TolReached2d();
1638 }
1639 }
1640
1641 if( theapp3d.TolReached3d()>myTolReached3d || myTolReached3d==0) {
1642 myTolReached3d = theapp3d.TolReached3d();
1643 }
1644
1645 Standard_Integer aNbMultiCurves, nbpoles;
1646 aNbMultiCurves=theapp3d.NbMultiCurves();
1647 for (j=1; j<=aNbMultiCurves; j++) {
1648 const AppParCurves_MultiBSpCurve& mbspc = theapp3d.Value(j);
1649 nbpoles = mbspc.NbPoles();
1650
1651 TColgp_Array1OfPnt tpoles(1, nbpoles);
1652 mbspc.Curve(1, tpoles);
1653 Handle(Geom_BSplineCurve) BS=new Geom_BSplineCurve(tpoles,
1654 mbspc.Knots(),
1655 mbspc.Multiplicities(),
1656 mbspc.Degree());
1657
1658 GeomLib_CheckBSplineCurve Check(BS,TOLCHECK,TOLANGCHECK);
1659 Check.FixTangent(Standard_True,Standard_True);
1660 //
1661 IntTools_Curve aCurve;
1662 aCurve.SetCurve(BS);
1663
1664 if(myApprox1) {
1665 TColgp_Array1OfPnt2d tpoles2d(1,nbpoles);
1666 mbspc.Curve(2,tpoles2d);
1667 Handle(Geom2d_BSplineCurve) BS2=new Geom2d_BSplineCurve(tpoles2d,
1668 mbspc.Knots(),
1669 mbspc.Multiplicities(),
1670 mbspc.Degree());
1671
1672 GeomLib_Check2dBSplineCurve newCheck(BS2,TOLCHECK,TOLANGCHECK);
1673 newCheck.FixTangent(Standard_True,Standard_True);
1674 //
1675 aCurve.SetFirstCurve2d(BS2);
1676 }
1677 else {
1678 Handle(Geom2d_BSplineCurve) H1;
1679 aCurve.SetFirstCurve2d(H1);
1680 }
1681
1682 if(myApprox2) {
1683 TColgp_Array1OfPnt2d tpoles2d(1, nbpoles);
1684 Standard_Integer TwoOrThree;
1685 TwoOrThree=myApprox1 ? 3 : 2;
1686 mbspc.Curve(TwoOrThree, tpoles2d);
1687 Handle(Geom2d_BSplineCurve) BS2 =new Geom2d_BSplineCurve(tpoles2d,
1688 mbspc.Knots(),
1689 mbspc.Multiplicities(),
1690 mbspc.Degree());
1691
1692 GeomLib_Check2dBSplineCurve newCheck(BS2,TOLCHECK,TOLANGCHECK);
1693 newCheck.FixTangent(Standard_True,Standard_True);
1694 //
1695 aCurve.SetSecondCurve2d(BS2);
1696 }
1697 else {
1698 Handle(Geom2d_BSplineCurve) H2;
1699 aCurve.SetSecondCurve2d(H2);
1700 }
1701 //
1702 mySeqOfCurve.Append(aCurve);
1703
1704 }// for (j=1; j<=aNbMultiCurves; j++) {
1705 }// else from if (!theapp3d.IsDone())
1706 }// for (i=1; i<=aNbParts; i++) {
1707 }// else { // myApprox=TRUE
1708 }// case IntPatch_Analytic:
1709 break;
1710
1711 case IntPatch_Walking:{
1712 Handle(IntPatch_WLine) WL =
1713 Handle(IntPatch_WLine)::DownCast(L);
1714 //
1715 Standard_Integer ifprm, ilprm;
1716 //
1717 if (!myApprox) {
1718 aNbParts = 1;
1719 if(!bAvoidLineConstructor){
1720 aNbParts=myLConstruct.NbParts();
1721 }
1722 for (i=1; i<=aNbParts; ++i) {
1723 Handle(Geom2d_BSplineCurve) H1, H2;
1724 Handle(Geom_Curve) aBSp;
1725 //
1726 if(bAvoidLineConstructor) {
1727 ifprm = 1;
1728 ilprm = WL->NbPnts();
1729 }
1730 else {
1731 myLConstruct.Part(i, fprm, lprm);
1732 ifprm=(Standard_Integer)fprm;
1733 ilprm=(Standard_Integer)lprm;
1734 }
1735 //
1736 if(myApprox1) {
1737 H1 = MakeBSpline2d(WL, ifprm, ilprm, Standard_True);
1738 }
1739 //
1740 if(myApprox2) {
1741 H2 = MakeBSpline2d(WL, ifprm, ilprm, Standard_False);
1742 }
1743 //
1744 aBSp=MakeBSpline(WL, ifprm, ilprm);
1745 IntTools_Curve aIC(aBSp, H1, H2);
1746 mySeqOfCurve.Append(aIC);
1747 }// for (i=1; i<=aNbParts; ++i) {
1748 }// if (!myApprox) {
1749 //
1750 else { // X
1751 Standard_Boolean bIsDecomposited;
1752 Standard_Integer nbiter, aNbSeqOfL;
1753 Standard_Real tol2d;
1754 IntPatch_SequenceOfLine aSeqOfL;
1755 GeomInt_WLApprox theapp3d;
1756 Approx_ParametrizationType aParType = Approx_ChordLength;
1757 //
1758 Standard_Boolean anApprox1 = myApprox1;
1759 Standard_Boolean anApprox2 = myApprox2;
1760
1761 tol2d = myTolApprox;
1762
1763 GeomAbs_SurfaceType typs1, typs2;
1764 typs1 = myHS1->Surface().GetType();
1765 typs2 = myHS2->Surface().GetType();
1766 Standard_Boolean anWithPC = Standard_True;
1767
1768 if(typs1 == GeomAbs_Cylinder && typs2 == GeomAbs_Sphere) {
1769 anWithPC =
1770 ApproxWithPCurves(myHS1->Surface().Cylinder(), myHS2->Surface().Sphere());
1771 }
1772 else if (typs1 == GeomAbs_Sphere && typs2 == GeomAbs_Cylinder) {
1773 anWithPC =
1774 ApproxWithPCurves(myHS2->Surface().Cylinder(), myHS1->Surface().Sphere());
1775 }
1776 if(!anWithPC) {
1777 //aParType = Approx_Centripetal;
1778 myTolApprox = 1.e-5;
1779 anApprox1 = Standard_False;
1780 anApprox2 = Standard_False;
1781 //
1782 tol2d = myTolApprox;
1783 }
1784
1785 if(myHS1 == myHS2) {
1786 //
1787 theapp3d.SetParameters(myTolApprox, tol2d, 4, 8, 0, Standard_False, aParType);
1788 rejectSurface = Standard_True;
1789 }
1790 else {
1791 if(reApprox && !rejectSurface)
1792 theapp3d.SetParameters(myTolApprox, tol2d, 4, 8, 0, Standard_False, aParType);
1793 else {
4f189102
P
1794 Standard_Integer iDegMax, iDegMin, iNbIter;
1795 //
4f189102
P
1796 ApproxParameters(myHS1, myHS2, iDegMin, iDegMax, iNbIter);
1797 theapp3d.SetParameters(myTolApprox, tol2d, iDegMin, iDegMax, iNbIter, Standard_True, aParType);
7fd59977 1798 //
7fd59977 1799 }
1800 }
1801 //
1802 Standard_Real aReachedTol = Precision::Confusion();
1803 bIsDecomposited=DecompositionOfWLine(WL,
1804 myHS1,
1805 myHS2,
1806 myFace1,
1807 myFace2,
1808 myLConstruct,
1809 bAvoidLineConstructor,
1810 aSeqOfL,
4f189102
P
1811 aReachedTol,
1812 myContext);
7fd59977 1813 if ( bIsDecomposited && ( myTolReached3d < aReachedTol ) )
1814 myTolReached3d = aReachedTol;
1815
1816 //
1817 aNbSeqOfL=aSeqOfL.Length();
1818 //
1819 if (bIsDecomposited) {
1820 nbiter=aNbSeqOfL;
1821 }
1822 else {
1823 nbiter=1;
1824 aNbParts=1;
1825 if (!bAvoidLineConstructor) {
1826 aNbParts=myLConstruct.NbParts();
1827 nbiter=aNbParts;
1828 }
1829 }
1830 //
1831 // nbiter=(bIsDecomposited) ? aSeqOfL.Length() :
1832 // ((bAvoidLineConstructor) ? 1 :aNbParts);
1833 //
1834 for(i = 1; i <= nbiter; ++i) {
1835 if(bIsDecomposited) {
1836 WL = Handle(IntPatch_WLine)::DownCast(aSeqOfL.Value(i));
1837 ifprm = 1;
1838 ilprm = WL->NbPnts();
1839 }
1840 else {
1841 if(bAvoidLineConstructor) {
1842 ifprm = 1;
1843 ilprm = WL->NbPnts();
1844 }
1845 else {
1846 myLConstruct.Part(i, fprm, lprm);
1847 ifprm = (Standard_Integer)fprm;
1848 ilprm = (Standard_Integer)lprm;
1849 }
1850 }
0fc4f2e2
P
1851 //-- lbr :
1852 //-- Si une des surfaces est un plan , on approxime en 2d
1853 //-- sur cette surface et on remonte les points 2d en 3d.
7fd59977 1854 if(typs1 == GeomAbs_Plane) {
1855 theapp3d.Perform(myHS1, myHS2, WL, Standard_False,Standard_True, myApprox2,ifprm,ilprm);
1856 }
1857 else if(typs2 == GeomAbs_Plane) {
1858 theapp3d.Perform(myHS1,myHS2,WL,Standard_False,myApprox1,Standard_True,ifprm,ilprm);
1859 }
1860 else {
1861 //
1862 if (myHS1 != myHS2){
1863 if ((typs1==GeomAbs_BezierSurface || typs1==GeomAbs_BSplineSurface) &&
1864 (typs2==GeomAbs_BezierSurface || typs2==GeomAbs_BSplineSurface)) {
1865
1866 theapp3d.SetParameters(myTolApprox, tol2d, 4, 8, 0, Standard_True, aParType);
1867
1868 Standard_Boolean bUseSurfaces;
1869 bUseSurfaces=NotUseSurfacesForApprox(myFace1, myFace2, WL, ifprm, ilprm);
1870 if (bUseSurfaces) {
1871 // ######
1872 rejectSurface = Standard_True;
1873 // ######
1874 theapp3d.SetParameters(myTolApprox, tol2d, 4, 8, 0, Standard_False, aParType);
1875 }
1876 }
1877 }
1878 //
1879 theapp3d.Perform(myHS1,myHS2,WL,Standard_True,anApprox1,anApprox2,ifprm,ilprm);
1880 }
1881
1882 if (!theapp3d.IsDone()) {
1883 //
1884 Handle(Geom2d_BSplineCurve) H1;
1885 //
1886 Handle(Geom_Curve) aBSp=MakeBSpline(WL,ifprm, ilprm);
1887 Handle(Geom2d_BSplineCurve) H2;
1888
1889 if(myApprox1) {
1890 H1 = MakeBSpline2d(WL, ifprm, ilprm, Standard_True);
1891 }
1892
1893 if(myApprox2) {
1894 H2 = MakeBSpline2d(WL, ifprm, ilprm, Standard_False);
1895 }
1896 //
1897 IntTools_Curve aIC(aBSp, H1, H2);
1898 mySeqOfCurve.Append(aIC);
1899 }
1900
1901 else {
1902 if(myApprox1 || myApprox2 || (typs1==GeomAbs_Plane || typs2==GeomAbs_Plane)) {
1903 if( theapp3d.TolReached2d()>myTolReached2d || myTolReached2d==0.) {
1904 myTolReached2d = theapp3d.TolReached2d();
1905 }
1906 }
1907 if(typs1==GeomAbs_Plane || typs2==GeomAbs_Plane) {
1908 myTolReached3d = myTolReached2d;
1909 //
1910 if (typs1==GeomAbs_Torus || typs2==GeomAbs_Torus) {
1911 if (myTolReached3d<1.e-6) {
1912 myTolReached3d = theapp3d.TolReached3d();
1913 myTolReached3d=1.e-6;
1914 }
1915 }
1916 //
1917 }
1918 else if( theapp3d.TolReached3d()>myTolReached3d || myTolReached3d==0.) {
1919 myTolReached3d = theapp3d.TolReached3d();
1920 }
1921
1922 Standard_Integer aNbMultiCurves, nbpoles;
1923 aNbMultiCurves=theapp3d.NbMultiCurves();
1924 for (j=1; j<=aNbMultiCurves; j++) {
1925 if(typs1 == GeomAbs_Plane) {
1926 const AppParCurves_MultiBSpCurve& mbspc = theapp3d.Value(j);
1927 nbpoles = mbspc.NbPoles();
1928
1929 TColgp_Array1OfPnt2d tpoles2d(1,nbpoles);
1930 TColgp_Array1OfPnt tpoles(1,nbpoles);
1931
1932 mbspc.Curve(1,tpoles2d);
1933 const gp_Pln& Pln = myHS1->Surface().Plane();
1934 //
1935 Standard_Integer ik;
1936 for(ik = 1; ik<= nbpoles; ik++) {
1937 tpoles.SetValue(ik,
1938 ElSLib::Value(tpoles2d.Value(ik).X(),
1939 tpoles2d.Value(ik).Y(),
1940 Pln));
1941 }
1942 //
1943 Handle(Geom_BSplineCurve) BS =
1944 new Geom_BSplineCurve(tpoles,
1945 mbspc.Knots(),
1946 mbspc.Multiplicities(),
1947 mbspc.Degree());
1948 GeomLib_CheckBSplineCurve Check(BS,TOLCHECK,TOLANGCHECK);
1949 Check.FixTangent(Standard_True, Standard_True);
1950 //
1951 IntTools_Curve aCurve;
1952 aCurve.SetCurve(BS);
1953
1954 if(myApprox1) {
1955 Handle(Geom2d_BSplineCurve) BS1 =
1956 new Geom2d_BSplineCurve(tpoles2d,
1957 mbspc.Knots(),
1958 mbspc.Multiplicities(),
1959 mbspc.Degree());
1960 GeomLib_Check2dBSplineCurve Check1(BS1,TOLCHECK,TOLANGCHECK);
1961 Check1.FixTangent(Standard_True,Standard_True);
1962 //
1963 // ############################################
1964 if(!rejectSurface && !reApprox) {
1965 Standard_Boolean isValid = IsCurveValid(BS1);
1966 if(!isValid) {
1967 reApprox = Standard_True;
1968 goto reapprox;
1969 }
1970 }
1971 // ############################################
1972 aCurve.SetFirstCurve2d(BS1);
1973 }
1974 else {
1975 Handle(Geom2d_BSplineCurve) H1;
1976 aCurve.SetFirstCurve2d(H1);
1977 }
1978
1979 if(myApprox2) {
1980 mbspc.Curve(2, tpoles2d);
1981
1982 Handle(Geom2d_BSplineCurve) BS2 = new Geom2d_BSplineCurve(tpoles2d,
1983 mbspc.Knots(),
1984 mbspc.Multiplicities(),
1985 mbspc.Degree());
1986 GeomLib_Check2dBSplineCurve newCheck(BS2,TOLCHECK,TOLANGCHECK);
1987 newCheck.FixTangent(Standard_True,Standard_True);
1988
1989 // ###########################################
1990 if(!rejectSurface && !reApprox) {
1991 Standard_Boolean isValid = IsCurveValid(BS2);
1992 if(!isValid) {
1993 reApprox = Standard_True;
1994 goto reapprox;
1995 }
1996 }
1997 // ###########################################
1998 //
1999 aCurve.SetSecondCurve2d(BS2);
2000 }
2001 else {
2002 Handle(Geom2d_BSplineCurve) H2;
2003 //
2004 aCurve.SetSecondCurve2d(H2);
2005 }
2006 //
2007 mySeqOfCurve.Append(aCurve);
2008 }
2009
2010 else if(typs2 == GeomAbs_Plane) {
2011 const AppParCurves_MultiBSpCurve& mbspc = theapp3d.Value(j);
2012 nbpoles = mbspc.NbPoles();
2013
2014 TColgp_Array1OfPnt2d tpoles2d(1,nbpoles);
2015 TColgp_Array1OfPnt tpoles(1,nbpoles);
2016 mbspc.Curve((myApprox1==Standard_True)? 2 : 1,tpoles2d);
2017 const gp_Pln& Pln = myHS2->Surface().Plane();
2018 //
2019 Standard_Integer ik;
2020 for(ik = 1; ik<= nbpoles; ik++) {
2021 tpoles.SetValue(ik,
2022 ElSLib::Value(tpoles2d.Value(ik).X(),
2023 tpoles2d.Value(ik).Y(),
2024 Pln));
2025
2026 }
2027 //
2028 Handle(Geom_BSplineCurve) BS=new Geom_BSplineCurve(tpoles,
2029 mbspc.Knots(),
2030 mbspc.Multiplicities(),
2031 mbspc.Degree());
2032 GeomLib_CheckBSplineCurve Check(BS,TOLCHECK,TOLANGCHECK);
2033 Check.FixTangent(Standard_True,Standard_True);
2034 //
2035 IntTools_Curve aCurve;
2036 aCurve.SetCurve(BS);
2037
2038 if(myApprox2) {
2039 Handle(Geom2d_BSplineCurve) BS1=new Geom2d_BSplineCurve(tpoles2d,
2040 mbspc.Knots(),
2041 mbspc.Multiplicities(),
2042 mbspc.Degree());
2043 GeomLib_Check2dBSplineCurve Check1(BS1,TOLCHECK,TOLANGCHECK);
2044 Check1.FixTangent(Standard_True,Standard_True);
2045 //
2046 // ###########################################
2047 if(!rejectSurface && !reApprox) {
2048 Standard_Boolean isValid = IsCurveValid(BS1);
2049 if(!isValid) {
2050 reApprox = Standard_True;
2051 goto reapprox;
2052 }
2053 }
989341c5 2054 // ###########################################
2055 bPCurvesOk = CheckPCurve(BS1, myFace2);
7fd59977 2056 aCurve.SetSecondCurve2d(BS1);
2057 }
2058 else {
2059 Handle(Geom2d_BSplineCurve) H2;
2060 aCurve.SetSecondCurve2d(H2);
2061 }
2062
2063 if(myApprox1) {
2064 mbspc.Curve(1,tpoles2d);
2065 Handle(Geom2d_BSplineCurve) BS2=new Geom2d_BSplineCurve(tpoles2d,
2066 mbspc.Knots(),
2067 mbspc.Multiplicities(),
2068 mbspc.Degree());
2069 GeomLib_Check2dBSplineCurve Check2(BS2,TOLCHECK,TOLANGCHECK);
2070 Check2.FixTangent(Standard_True,Standard_True);
2071 //
2072 // ###########################################
2073 if(!rejectSurface && !reApprox) {
2074 Standard_Boolean isValid = IsCurveValid(BS2);
2075 if(!isValid) {
2076 reApprox = Standard_True;
2077 goto reapprox;
2078 }
2079 }
989341c5 2080 // ###########################################
2081 bPCurvesOk = bPCurvesOk && CheckPCurve(BS2, myFace1);
7fd59977 2082 aCurve.SetFirstCurve2d(BS2);
2083 }
2084 else {
2085 Handle(Geom2d_BSplineCurve) H1;
2086 //
2087 aCurve.SetFirstCurve2d(H1);
2088 }
2089 //
989341c5 2090 //if points of the pcurves are out of the faces bounds
2091 //create 3d and 2d curves without approximation
2092 if (!bPCurvesOk) {
2093 Handle(Geom2d_BSplineCurve) H1, H2;
2094 bPCurvesOk = Standard_True;
2095 //
2096 Handle(Geom_Curve) aBSp=MakeBSpline(WL,ifprm, ilprm);
2097
2098 if(myApprox1) {
2099 H1 = MakeBSpline2d(WL, ifprm, ilprm, Standard_True);
2100 bPCurvesOk = CheckPCurve(H1, myFace1);
2101 }
2102
2103 if(myApprox2) {
2104 H2 = MakeBSpline2d(WL, ifprm, ilprm, Standard_False);
2105 bPCurvesOk = bPCurvesOk && CheckPCurve(H2, myFace2);
2106 }
2107 //
2108 //if pcurves created without approximation are out of the
2109 //faces bounds, use approximated 3d and 2d curves
2110 if (bPCurvesOk) {
2111 IntTools_Curve aIC(aBSp, H1, H2);
2112 mySeqOfCurve.Append(aIC);
2113 } else {
2114 mySeqOfCurve.Append(aCurve);
2115 }
2116 } else {
2117 mySeqOfCurve.Append(aCurve);
2118 }
7fd59977 2119 }
2120 else {
2121 const AppParCurves_MultiBSpCurve& mbspc = theapp3d.Value(j);
2122 nbpoles = mbspc.NbPoles();
2123 TColgp_Array1OfPnt tpoles(1,nbpoles);
2124 mbspc.Curve(1,tpoles);
2125 Handle(Geom_BSplineCurve) BS=new Geom_BSplineCurve(tpoles,
2126 mbspc.Knots(),
2127 mbspc.Multiplicities(),
2128 mbspc.Degree());
2129 GeomLib_CheckBSplineCurve Check(BS,TOLCHECK,TOLANGCHECK);
2130 Check.FixTangent(Standard_True,Standard_True);
2131 //
2132 IntTools_Curve aCurve;
2133 aCurve.SetCurve(BS);
2134
2135 if(myApprox1) {
2136 if(anApprox1) {
2137 TColgp_Array1OfPnt2d tpoles2d(1,nbpoles);
2138 mbspc.Curve(2,tpoles2d);
2139 Handle(Geom2d_BSplineCurve) BS1=new Geom2d_BSplineCurve(tpoles2d,
2140 mbspc.Knots(),
2141 mbspc.Multiplicities(),
2142 mbspc.Degree());
2143 GeomLib_Check2dBSplineCurve newCheck(BS1,TOLCHECK,TOLANGCHECK);
2144 newCheck.FixTangent(Standard_True,Standard_True);
2145 //
2146 aCurve.SetFirstCurve2d(BS1);
2147 }
2148 else {
2149 Handle(Geom2d_BSplineCurve) BS1;
2150 fprm = BS->FirstParameter();
2151 lprm = BS->LastParameter();
2152
2153 Handle(Geom2d_Curve) C2d;
2154 Standard_Real aTol = myTolApprox;
2155 BuildPCurves(fprm, lprm, aTol, myHS1->ChangeSurface().Surface(), BS, C2d);
2156 BS1 = Handle(Geom2d_BSplineCurve)::DownCast(C2d);
2157 aCurve.SetFirstCurve2d(BS1);
2158 }
2159
2160 }
2161 else {
2162 Handle(Geom2d_BSplineCurve) H1;
2163 //
2164 aCurve.SetFirstCurve2d(H1);
2165 }
2166 if(myApprox2) {
2167 if(anApprox2) {
2168 TColgp_Array1OfPnt2d tpoles2d(1,nbpoles);
2169 mbspc.Curve((myApprox1==Standard_True)? 3 : 2,tpoles2d);
2170 Handle(Geom2d_BSplineCurve) BS2=new Geom2d_BSplineCurve(tpoles2d,
2171 mbspc.Knots(),
2172 mbspc.Multiplicities(),
2173 mbspc.Degree());
2174 GeomLib_Check2dBSplineCurve newCheck(BS2,TOLCHECK,TOLANGCHECK);
2175 newCheck.FixTangent(Standard_True,Standard_True);
2176 //
2177 aCurve.SetSecondCurve2d(BS2);
2178 }
2179 else {
2180 Handle(Geom2d_BSplineCurve) BS2;
2181 fprm = BS->FirstParameter();
2182 lprm = BS->LastParameter();
2183
2184 Handle(Geom2d_Curve) C2d;
2185 Standard_Real aTol = myTolApprox;
2186 BuildPCurves(fprm, lprm, aTol, myHS2->ChangeSurface().Surface(), BS, C2d);
2187 BS2 = Handle(Geom2d_BSplineCurve)::DownCast(C2d);
2188 aCurve.SetSecondCurve2d(BS2);
2189 }
2190
2191 }
2192 else {
2193 Handle(Geom2d_BSplineCurve) H2;
2194 //
2195 aCurve.SetSecondCurve2d(H2);
2196 }
2197 //
2198 mySeqOfCurve.Append(aCurve);
2199 }
2200 }
2201 }
2202 }
2203 }// else { // X
2204 }// case IntPatch_Walking:{
2205 break;
2206
2207 case IntPatch_Restriction:
2208 break;
2209
2210 }
2211}
2212
2213//=======================================================================
2214//function : BuildPCurves
2215//purpose :
2216//=======================================================================
2217 void BuildPCurves (Standard_Real f,
2218 Standard_Real l,
2219 Standard_Real& Tol,
2220 const Handle (Geom_Surface)& S,
2221 const Handle (Geom_Curve)& C,
2222 Handle (Geom2d_Curve)& C2d)
2223{
2224
2225 Standard_Real umin,umax,vmin,vmax;
2226 //
2227
2228 if (C2d.IsNull()) {
2229
2230 // in class ProjLib_Function the range of parameters is shrank by 1.e-09
2231 if((l - f) > 2.e-09) {
2232 C2d = GeomProjLib::Curve2d(C,f,l,S,Tol);
2233 //
2234 if (C2d.IsNull()) {
2235 // proj. a circle that goes through the pole on a sphere to the sphere
2236 Tol=Tol+1.e-7;
2237 C2d = GeomProjLib::Curve2d(C,f,l,S,Tol);
2238 }
2239 }
2240 else {
2241 if((l - f) > Epsilon(Abs(f))) {
2242 GeomAPI_ProjectPointOnSurf aProjector1, aProjector2;
2243 gp_Pnt P1 = C->Value(f);
2244 gp_Pnt P2 = C->Value(l);
2245 aProjector1.Init(P1, S);
2246 aProjector2.Init(P2, S);
2247
2248 if(aProjector1.IsDone() && aProjector2.IsDone()) {
2249 Standard_Real U=0., V=0.;
2250 aProjector1.LowerDistanceParameters(U, V);
2251 gp_Pnt2d p1(U, V);
2252
2253 aProjector2.LowerDistanceParameters(U, V);
2254 gp_Pnt2d p2(U, V);
2255
2256 if(p1.Distance(p2) > gp::Resolution()) {
2257 TColgp_Array1OfPnt2d poles(1,2);
2258 TColStd_Array1OfReal knots(1,2);
2259 TColStd_Array1OfInteger mults(1,2);
2260 poles(1) = p1;
2261 poles(2) = p2;
2262 knots(1) = f;
2263 knots(2) = l;
2264 mults(1) = mults(2) = 2;
2265
2266 C2d = new Geom2d_BSplineCurve(poles,knots,mults,1);
2267
2268 // compute reached tolerance.begin
2269 gp_Pnt PMid = C->Value((f + l) * 0.5);
2270 aProjector1.Perform(PMid);
2271
2272 if(aProjector1.IsDone()) {
2273 aProjector1.LowerDistanceParameters(U, V);
2274 gp_Pnt2d pmidproj(U, V);
2275 gp_Pnt2d pmidcurve2d = C2d->Value((f + l) * 0.5);
2276 Standard_Real adist = pmidcurve2d.Distance(pmidproj);
2277 Tol = (adist > Tol) ? adist : Tol;
2278 }
2279 // compute reached tolerance.end
2280 }
2281 }
2282 }
2283 }
2284 //
2285 S->Bounds(umin, umax, vmin, vmax);
2286
2287 if (S->IsUPeriodic() && !C2d.IsNull()) {
0fc4f2e2 2288 // Recadre dans le domaine UV de la face
7fd59977 2289 Standard_Real period, U0, du, aEps;
2290
2291 du =0.0;
2292 aEps=Precision::PConfusion();
2293 period = S->UPeriod();
2294 gp_Pnt2d Pf = C2d->Value(f);
2295 U0=Pf.X();
2296 //
2297 gp_Pnt2d Pl = C2d->Value(l);
2298
2299 U0 = Min(Pl.X(), U0);
2300// while(U0-umin<aEps) {
2301 while(U0-umin<-aEps) {
2302 U0+=period;
2303 du+=period;
2304 }
2305 //
2306 while(U0-umax>aEps) {
2307 U0-=period;
2308 du-=period;
2309 }
2310 if (du != 0) {
2311 gp_Vec2d T1(du,0.);
2312 C2d->Translate(T1);
2313 }
2314 }
2315 }
7fd59977 2316}
2317
2318//=======================================================================
2319//function : Parameters
2320//purpose :
2321//=======================================================================
2322 void Parameters(const Handle(GeomAdaptor_HSurface)& HS1,
2323 const Handle(GeomAdaptor_HSurface)& HS2,
2324 const gp_Pnt& Ptref,
2325 Standard_Real& U1,
2326 Standard_Real& V1,
2327 Standard_Real& U2,
2328 Standard_Real& V2)
2329{
2330
2331 IntSurf_Quadric quad1,quad2;
2332 GeomAbs_SurfaceType typs = HS1->Surface().GetType();
2333
2334 switch (typs) {
2335 case GeomAbs_Plane:
2336 quad1.SetValue(HS1->Surface().Plane());
2337 break;
2338 case GeomAbs_Cylinder:
2339 quad1.SetValue(HS1->Surface().Cylinder());
2340 break;
2341 case GeomAbs_Cone:
2342 quad1.SetValue(HS1->Surface().Cone());
2343 break;
2344 case GeomAbs_Sphere:
2345 quad1.SetValue(HS1->Surface().Sphere());
2346 break;
2347 default:
2348 Standard_ConstructionError::Raise("GeomInt_IntSS::MakeCurve");
2349 }
2350
2351 typs = HS2->Surface().GetType();
2352 switch (typs) {
2353 case GeomAbs_Plane:
2354 quad2.SetValue(HS2->Surface().Plane());
2355 break;
2356 case GeomAbs_Cylinder:
2357 quad2.SetValue(HS2->Surface().Cylinder());
2358 break;
2359 case GeomAbs_Cone:
2360 quad2.SetValue(HS2->Surface().Cone());
2361 break;
2362 case GeomAbs_Sphere:
2363 quad2.SetValue(HS2->Surface().Sphere());
2364 break;
2365 default:
2366 Standard_ConstructionError::Raise("GeomInt_IntSS::MakeCurve");
2367 }
2368
2369 quad1.Parameters(Ptref,U1,V1);
2370 quad2.Parameters(Ptref,U2,V2);
2371}
2372
2373//=======================================================================
2374//function : MakeBSpline
2375//purpose :
2376//=======================================================================
2377Handle(Geom_Curve) MakeBSpline (const Handle(IntPatch_WLine)& WL,
2378 const Standard_Integer ideb,
2379 const Standard_Integer ifin)
2380{
2381 Standard_Integer i,nbpnt = ifin-ideb+1;
2382 TColgp_Array1OfPnt poles(1,nbpnt);
2383 TColStd_Array1OfReal knots(1,nbpnt);
2384 TColStd_Array1OfInteger mults(1,nbpnt);
2385 Standard_Integer ipidebm1;
2386 for(i=1,ipidebm1=i+ideb-1; i<=nbpnt;ipidebm1++, i++) {
2387 poles(i) = WL->Point(ipidebm1).Value();
2388 mults(i) = 1;
2389 knots(i) = i-1;
2390 }
2391 mults(1) = mults(nbpnt) = 2;
2392 return
2393 new Geom_BSplineCurve(poles,knots,mults,1);
2394}
2395//
2396
2397//=======================================================================
2398//function : MakeBSpline2d
2399//purpose :
2400//=======================================================================
2401Handle(Geom2d_BSplineCurve) MakeBSpline2d(const Handle(IntPatch_WLine)& theWLine,
2402 const Standard_Integer ideb,
2403 const Standard_Integer ifin,
2404 const Standard_Boolean onFirst)
2405{
2406 Standard_Integer i, nbpnt = ifin-ideb+1;
2407 TColgp_Array1OfPnt2d poles(1,nbpnt);
2408 TColStd_Array1OfReal knots(1,nbpnt);
2409 TColStd_Array1OfInteger mults(1,nbpnt);
2410 Standard_Integer ipidebm1;
2411
2412 for(i = 1, ipidebm1 = i+ideb-1; i <= nbpnt; ipidebm1++, i++) {
2413 Standard_Real U, V;
2414 if(onFirst)
2415 theWLine->Point(ipidebm1).ParametersOnS1(U, V);
2416 else
2417 theWLine->Point(ipidebm1).ParametersOnS2(U, V);
2418 poles(i).SetCoord(U, V);
2419 mults(i) = 1;
2420 knots(i) = i-1;
2421 }
2422 mults(1) = mults(nbpnt) = 2;
2423
2424 return new Geom2d_BSplineCurve(poles,knots,mults,1);
2425}
2426//=======================================================================
2427//function : PrepareLines3D
2428//purpose :
2429//=======================================================================
a9f7b6b5 2430 void IntTools_FaceFace::PrepareLines3D(const Standard_Boolean bToSplit)
7fd59977 2431{
a9f7b6b5
P
2432 Standard_Integer i, aNbCurves;
2433 GeomAbs_SurfaceType aType1, aType2;
7fd59977 2434 IntTools_SequenceOfCurves aNewCvs;
7fd59977 2435 //
a9f7b6b5 2436 // 1. Treatment closed curves
7fd59977 2437 aNbCurves=mySeqOfCurve.Length();
a9f7b6b5 2438 for (i=1; i<=aNbCurves; ++i) {
7fd59977 2439 const IntTools_Curve& aIC=mySeqOfCurve(i);
7fd59977 2440 //
a9f7b6b5
P
2441 if (bToSplit) {
2442 Standard_Integer j, aNbC;
2443 IntTools_SequenceOfCurves aSeqCvs;
2444 //
2445 aNbC=IntTools_Tools::SplitCurve(aIC, aSeqCvs);
2446 if (aNbC) {
2447 for (j=1; j<=aNbC; ++j) {
2448 const IntTools_Curve& aICNew=aSeqCvs(j);
2449 aNewCvs.Append(aICNew);
2450 }
2451 }
2452 else {
2453 aNewCvs.Append(aIC);
7fd59977 2454 }
2455 }
7fd59977 2456 else {
2457 aNewCvs.Append(aIC);
2458 }
2459 }
2460 //
2461 // 2. Plane\Cone intersection when we had 4 curves
a9f7b6b5
P
2462 aType1=myHS1->GetType();
2463 aType2=myHS2->GetType();
2464 aNbCurves=aNewCvs.Length();
2465 //
7fd59977 2466 if ((aType1==GeomAbs_Plane && aType2==GeomAbs_Cone) ||
2467 (aType2==GeomAbs_Plane && aType1==GeomAbs_Cone)) {
7fd59977 2468 if (aNbCurves==4) {
a9f7b6b5
P
2469 GeomAbs_CurveType aCType1;
2470 //
2471 aCType1=aNewCvs(1).Type();
7fd59977 2472 if (aCType1==GeomAbs_Line) {
2473 IntTools_SequenceOfCurves aSeqIn, aSeqOut;
2474 //
a9f7b6b5 2475 for (i=1; i<=aNbCurves; ++i) {
7fd59977 2476 const IntTools_Curve& aIC=aNewCvs(i);
2477 aSeqIn.Append(aIC);
2478 }
2479 //
2480 IntTools_Tools::RejectLines(aSeqIn, aSeqOut);
2481 //
2482 aNewCvs.Clear();
2483 aNbCurves=aSeqOut.Length();
a9f7b6b5 2484 for (i=1; i<=aNbCurves; ++i) {
7fd59977 2485 const IntTools_Curve& aIC=aSeqOut(i);
2486 aNewCvs.Append(aIC);
2487 }
7fd59977 2488 }
2489 }
a9f7b6b5 2490 }// if ((aType1==GeomAbs_Plane && aType2==GeomAbs_Cone)...
7fd59977 2491 //
2492 // 3. Fill mySeqOfCurve
2493 mySeqOfCurve.Clear();
2494 aNbCurves=aNewCvs.Length();
a9f7b6b5 2495 for (i=1; i<=aNbCurves; ++i) {
7fd59977 2496 const IntTools_Curve& aIC=aNewCvs(i);
2497 mySeqOfCurve.Append(aIC);
2498 }
7fd59977 2499}
7fd59977 2500//=======================================================================
2501//function : CorrectSurfaceBoundaries
2502//purpose :
2503//=======================================================================
2504 void CorrectSurfaceBoundaries(const TopoDS_Face& theFace,
2505 const Standard_Real theTolerance,
2506 Standard_Real& theumin,
2507 Standard_Real& theumax,
2508 Standard_Real& thevmin,
2509 Standard_Real& thevmax)
2510{
2511 Standard_Boolean enlarge, isuperiodic, isvperiodic;
2512 Standard_Real uinf, usup, vinf, vsup, delta;
2513 GeomAbs_SurfaceType aType;
2514 Handle(Geom_Surface) aSurface;
2515 //
2516 aSurface = BRep_Tool::Surface(theFace);
2517 aSurface->Bounds(uinf, usup, vinf, vsup);
2518 delta = theTolerance;
2519 enlarge = Standard_False;
2520 //
2521 GeomAdaptor_Surface anAdaptorSurface(aSurface);
2522 //
2523 if(aSurface->IsKind(STANDARD_TYPE(Geom_RectangularTrimmedSurface))) {
2524 Handle(Geom_Surface) aBasisSurface =
2525 (Handle(Geom_RectangularTrimmedSurface)::DownCast(aSurface))->BasisSurface();
2526
2527 if(aBasisSurface->IsKind(STANDARD_TYPE(Geom_RectangularTrimmedSurface)) ||
2528 aBasisSurface->IsKind(STANDARD_TYPE(Geom_OffsetSurface))) {
2529 return;
2530 }
2531 }
2532 //
2533 if(aSurface->IsKind(STANDARD_TYPE(Geom_OffsetSurface))) {
2534 Handle(Geom_Surface) aBasisSurface =
2535 (Handle(Geom_OffsetSurface)::DownCast(aSurface))->BasisSurface();
2536
2537 if(aBasisSurface->IsKind(STANDARD_TYPE(Geom_RectangularTrimmedSurface)) ||
2538 aBasisSurface->IsKind(STANDARD_TYPE(Geom_OffsetSurface))) {
2539 return;
2540 }
2541 }
2542 //
2543 isuperiodic = anAdaptorSurface.IsUPeriodic();
2544 isvperiodic = anAdaptorSurface.IsVPeriodic();
2545 //
2546 aType=anAdaptorSurface.GetType();
2547 if((aType==GeomAbs_BezierSurface) ||
2548 (aType==GeomAbs_BSplineSurface) ||
2549 (aType==GeomAbs_SurfaceOfExtrusion) ||
2550 (aType==GeomAbs_SurfaceOfRevolution)) {
2551 enlarge=Standard_True;
2552 }
2553 //
b9894805 2554 if (aType==GeomAbs_Sphere) {
2555 Standard_Real dV;
2556 //
2557 dV=thevmax-thevmin;
2558 if (dV+delta<M_PI) {
2559 enlarge=Standard_True;
2560 }
2561 }
2562 //
7fd59977 2563 if(!isuperiodic && enlarge) {
2564
2565 if((theumin - uinf) > delta )
2566 theumin -= delta;
2567 else {
2568 theumin = uinf;
2569 }
2570
2571 if((usup - theumax) > delta )
2572 theumax += delta;
2573 else
2574 theumax = usup;
2575 }
2576 //
2577 if(!isvperiodic && enlarge) {
2578 if((thevmin - vinf) > delta ) {
2579 thevmin -= delta;
2580 }
2581 else {
2582 thevmin = vinf;
2583 }
2584 if((vsup - thevmax) > delta ) {
2585 thevmax += delta;
2586 }
2587 else {
2588 thevmax = vsup;
2589 }
2590 }
2591 //
2592 {
2593 Standard_Integer aNbP;
2594 Standard_Real aXP, dXfact, aXmid, aX1, aX2, aTolPA;
2595 //
2596 aTolPA=Precision::Angular();
2597 // U
2598 if (isuperiodic) {
2599 aXP=anAdaptorSurface.UPeriod();
2600 dXfact=theumax-theumin;
2601 if (dXfact-aTolPA>aXP) {
2602 aXmid=0.5*(theumax+theumin);
2603 aNbP=RealToInt(aXmid/aXP);
2604 if (aXmid<0.) {
2605 aNbP=aNbP-1;
2606 }
2607 aX1=aNbP*aXP;
0fc4f2e2
P
2608 if (theumin>aTolPA) {
2609 aX1=theumin+aNbP*aXP;
2610 }
7fd59977 2611 aX2=aX1+aXP;
2612 if (theumin<aX1) {
2613 theumin=aX1;
2614 }
2615 if (theumax>aX2) {
2616 theumax=aX2;
2617 }
2618 }
2619 }
2620 // V
2621 if (isvperiodic) {
2622 aXP=anAdaptorSurface.VPeriod();
2623 dXfact=thevmax-thevmin;
2624 if (dXfact-aTolPA>aXP) {
2625 aXmid=0.5*(thevmax+thevmin);
2626 aNbP=RealToInt(aXmid/aXP);
2627 if (aXmid<0.) {
2628 aNbP=aNbP-1;
2629 }
2630 aX1=aNbP*aXP;
0fc4f2e2
P
2631 if (thevmin>aTolPA) {
2632 aX1=thevmin+aNbP*aXP;
2633 }
7fd59977 2634 aX2=aX1+aXP;
2635 if (thevmin<aX1) {
2636 thevmin=aX1;
2637 }
2638 if (thevmax>aX2) {
2639 thevmax=aX2;
2640 }
2641 }
2642 }
2643 }
2644 //
2645 if(isuperiodic || isvperiodic) {
2646 Standard_Boolean correct = Standard_False;
2647 Standard_Boolean correctU = Standard_False;
2648 Standard_Boolean correctV = Standard_False;
2649 Bnd_Box2d aBox;
2650 TopExp_Explorer anExp;
2651
2652 for(anExp.Init(theFace, TopAbs_EDGE); anExp.More(); anExp.Next()) {
2653 if(BRep_Tool::IsClosed(TopoDS::Edge(anExp.Current()), theFace)) {
2654 correct = Standard_True;
2655 Standard_Real f, l;
2656 TopoDS_Edge anEdge = TopoDS::Edge(anExp.Current());
2657
2658 for(Standard_Integer i = 0; i < 2; i++) {
2659 if(i==0) {
2660 anEdge.Orientation(TopAbs_FORWARD);
2661 }
2662 else {
2663 anEdge.Orientation(TopAbs_REVERSED);
2664 }
2665 Handle(Geom2d_Curve) aCurve = BRep_Tool::CurveOnSurface(anEdge, theFace, f, l);
2666
2667 if(aCurve.IsNull()) {
2668 correct = Standard_False;
2669 break;
2670 }
2671 Handle(Geom2d_Line) aLine = Handle(Geom2d_Line)::DownCast(aCurve);
2672
2673 if(aLine.IsNull()) {
2674 correct = Standard_False;
2675 break;
2676 }
2677 gp_Dir2d anUDir(1., 0.);
2678 gp_Dir2d aVDir(0., 1.);
2679 Standard_Real anAngularTolerance = Precision::Angular();
2680
2681 correctU = correctU || aLine->Position().Direction().IsParallel(aVDir, anAngularTolerance);
2682 correctV = correctV || aLine->Position().Direction().IsParallel(anUDir, anAngularTolerance);
2683
2684 gp_Pnt2d pp1 = aCurve->Value(f);
2685 aBox.Add(pp1);
2686 gp_Pnt2d pp2 = aCurve->Value(l);
2687 aBox.Add(pp2);
2688 }
2689 if(!correct)
2690 break;
2691 }
2692 }
2693
2694 if(correct) {
2695 Standard_Real umin, vmin, umax, vmax;
2696 aBox.Get(umin, vmin, umax, vmax);
2697
2698 if(isuperiodic && correctU) {
2699
2700 if(theumin < umin)
2701 theumin = umin;
2702
2703 if(theumax > umax) {
2704 theumax = umax;
2705 }
2706 }
2707 if(isvperiodic && correctV) {
2708
2709 if(thevmin < vmin)
2710 thevmin = vmin;
2711 if(thevmax > vmax)
2712 thevmax = vmax;
2713 }
2714 }
2715 }
2716}
2717//
2718//
2719// The block is dedicated to determine whether WLine [ifprm, ilprm]
2720// crosses the degenerated zone on each given surface or not.
2721// If Yes -> We will not use info about surfaces during approximation
8e0115e4 2722// because inside degenerated zone of the surface the approx. algo.
7fd59977 2723// uses wrong values of normal, etc., and resulting curve will have
2724// oscillations that we would not like to have.
7fd59977 2725
2726
4e57c75e 2727
7fd59977 2728static
2729 Standard_Boolean IsDegeneratedZone(const gp_Pnt2d& aP2d,
2730 const Handle(Geom_Surface)& aS,
2731 const Standard_Integer iDir);
2732static
2733 Standard_Boolean IsPointInDegeneratedZone(const IntSurf_PntOn2S& aP2S,
2734 const TopoDS_Face& aF1,
2735 const TopoDS_Face& aF2);
2736//=======================================================================
2737//function : NotUseSurfacesForApprox
2738//purpose :
2739//=======================================================================
2740Standard_Boolean NotUseSurfacesForApprox(const TopoDS_Face& aF1,
2741 const TopoDS_Face& aF2,
2742 const Handle(IntPatch_WLine)& WL,
2743 const Standard_Integer ifprm,
2744 const Standard_Integer ilprm)
2745{
2746 Standard_Boolean bPInDZ;
2747
2748 Handle(IntSurf_LineOn2S) aLineOn2S=WL->Curve();
2749
2750 const IntSurf_PntOn2S& aP2Sfprm=aLineOn2S->Value(ifprm);
2751 bPInDZ=IsPointInDegeneratedZone(aP2Sfprm, aF1, aF2);
2752 if (bPInDZ) {
2753 return bPInDZ;
2754 }
2755
2756 const IntSurf_PntOn2S& aP2Slprm=aLineOn2S->Value(ilprm);
2757 bPInDZ=IsPointInDegeneratedZone(aP2Slprm, aF1, aF2);
2758
2759 return bPInDZ;
2760}
2761//=======================================================================
2762//function : IsPointInDegeneratedZone
2763//purpose :
2764//=======================================================================
2765Standard_Boolean IsPointInDegeneratedZone(const IntSurf_PntOn2S& aP2S,
2766 const TopoDS_Face& aF1,
2767 const TopoDS_Face& aF2)
2768
2769{
2770 Standard_Boolean bFlag=Standard_True;
2771 Standard_Real US11, US12, VS11, VS12, US21, US22, VS21, VS22;
2772 Standard_Real U1, V1, U2, V2, aDelta, aD;
2773 gp_Pnt2d aP2d;
2774
2775 Handle(Geom_Surface)aS1 = BRep_Tool::Surface(aF1);
2776 aS1->Bounds(US11, US12, VS11, VS12);
2777 GeomAdaptor_Surface aGAS1(aS1);
2778
2779 Handle(Geom_Surface)aS2 = BRep_Tool::Surface(aF2);
2780 aS1->Bounds(US21, US22, VS21, VS22);
2781 GeomAdaptor_Surface aGAS2(aS2);
2782 //
2783 //const gp_Pnt& aP=aP2S.Value();
2784 aP2S.Parameters(U1, V1, U2, V2);
2785 //
2786 aDelta=1.e-7;
2787 // Check on Surf 1
2788 aD=aGAS1.UResolution(aDelta);
2789 aP2d.SetCoord(U1, V1);
2790 if (fabs(U1-US11) < aD) {
2791 bFlag=IsDegeneratedZone(aP2d, aS1, 1);
2792 if (bFlag) {
2793 return bFlag;
2794 }
2795 }
2796 if (fabs(U1-US12) < aD) {
2797 bFlag=IsDegeneratedZone(aP2d, aS1, 1);
2798 if (bFlag) {
2799 return bFlag;
2800 }
2801 }
2802 aD=aGAS1.VResolution(aDelta);
2803 if (fabs(V1-VS11) < aDelta) {
2804 bFlag=IsDegeneratedZone(aP2d, aS1, 2);
2805 if (bFlag) {
2806 return bFlag;
2807 }
2808 }
2809 if (fabs(V1-VS12) < aDelta) {
2810 bFlag=IsDegeneratedZone(aP2d, aS1, 2);
2811 if (bFlag) {
2812 return bFlag;
2813 }
2814 }
2815 // Check on Surf 2
2816 aD=aGAS2.UResolution(aDelta);
2817 aP2d.SetCoord(U2, V2);
2818 if (fabs(U2-US21) < aDelta) {
2819 bFlag=IsDegeneratedZone(aP2d, aS2, 1);
2820 if (bFlag) {
2821 return bFlag;
2822 }
2823 }
2824 if (fabs(U2-US22) < aDelta) {
2825 bFlag=IsDegeneratedZone(aP2d, aS2, 1);
2826 if (bFlag) {
2827 return bFlag;
2828 }
2829 }
2830 aD=aGAS2.VResolution(aDelta);
2831 if (fabs(V2-VS21) < aDelta) {
2832 bFlag=IsDegeneratedZone(aP2d, aS2, 2);
2833 if (bFlag) {
2834 return bFlag;
2835 }
2836 }
2837 if (fabs(V2-VS22) < aDelta) {
2838 bFlag=IsDegeneratedZone(aP2d, aS2, 2);
2839 if (bFlag) {
2840 return bFlag;
2841 }
2842 }
2843 return !bFlag;
2844}
2845
2846//=======================================================================
2847//function : IsDegeneratedZone
2848//purpose :
2849//=======================================================================
2850Standard_Boolean IsDegeneratedZone(const gp_Pnt2d& aP2d,
2851 const Handle(Geom_Surface)& aS,
2852 const Standard_Integer iDir)
2853{
2854 Standard_Boolean bFlag=Standard_True;
2855 Standard_Real US1, US2, VS1, VS2, dY, dX, d1, d2, dD;
2856 Standard_Real aXm, aYm, aXb, aYb, aXe, aYe;
2857 aS->Bounds(US1, US2, VS1, VS2);
2858
2859 gp_Pnt aPm, aPb, aPe;
2860
2861 aXm=aP2d.X();
2862 aYm=aP2d.Y();
2863
2864 aS->D0(aXm, aYm, aPm);
2865
2866 dX=1.e-5;
2867 dY=1.e-5;
2868 dD=1.e-12;
2869
2870 if (iDir==1) {
2871 aXb=aXm;
2872 aXe=aXm;
2873 aYb=aYm-dY;
2874 if (aYb < VS1) {
2875 aYb=VS1;
2876 }
2877 aYe=aYm+dY;
2878 if (aYe > VS2) {
2879 aYe=VS2;
2880 }
2881 aS->D0(aXb, aYb, aPb);
2882 aS->D0(aXe, aYe, aPe);
2883
2884 d1=aPm.Distance(aPb);
2885 d2=aPm.Distance(aPe);
2886 if (d1 < dD && d2 < dD) {
2887 return bFlag;
2888 }
2889 return !bFlag;
2890 }
2891 //
2892 else if (iDir==2) {
2893 aYb=aYm;
2894 aYe=aYm;
2895 aXb=aXm-dX;
2896 if (aXb < US1) {
2897 aXb=US1;
2898 }
2899 aXe=aXm+dX;
2900 if (aXe > US2) {
2901 aXe=US2;
2902 }
2903 aS->D0(aXb, aYb, aPb);
2904 aS->D0(aXe, aYe, aPe);
2905
2906 d1=aPm.Distance(aPb);
2907 d2=aPm.Distance(aPe);
2908 if (d1 < dD && d2 < dD) {
2909 return bFlag;
2910 }
2911 return !bFlag;
2912 }
2913 return !bFlag;
2914}
2915
2916//=========================================================================
2917// static function : ComputePurgedWLine
2918// purpose : Removes equal points (leave one of equal points) from theWLine
2919// and recompute vertex parameters.
2920// Returns new WLine or null WLine if the number
2921// of the points is less than 2.
2922//=========================================================================
2923Handle(IntPatch_WLine) ComputePurgedWLine(const Handle(IntPatch_WLine)& theWLine) {
3928aec6 2924
3928aec6 2925 Standard_Integer i, k, v, nb, nbvtx;
7fd59977 2926 Handle(IntPatch_WLine) aResult;
3928aec6
P
2927 nbvtx = theWLine->NbVertex();
2928 nb = theWLine->NbPnts();
2929 if (nb==2) {
2930 const IntSurf_PntOn2S& p1 = theWLine->Point(1);
2931 const IntSurf_PntOn2S& p2 = theWLine->Point(2);
2932 if(p1.Value().IsEqual(p2.Value(), gp::Resolution())) {
2933 return aResult;
2934 }
2935 }
2936 //
7fd59977 2937 Handle(IntPatch_WLine) aLocalWLine;
2938 Handle(IntPatch_WLine) aTmpWLine = theWLine;
7fd59977 2939 Handle(IntSurf_LineOn2S) aLineOn2S = new IntSurf_LineOn2S();
2940 aLocalWLine = new IntPatch_WLine(aLineOn2S, Standard_False);
7fd59977 2941 for(i = 1; i <= nb; i++) {
2942 aLineOn2S->Add(theWLine->Point(i));
2943 }
2944
2945 for(v = 1; v <= nbvtx; v++) {
2946 aLocalWLine->AddVertex(theWLine->Vertex(v));
2947 }
2948
2949 for(i = 1; i <= aLineOn2S->NbPoints(); i++) {
2950 Standard_Integer aStartIndex = i + 1;
2951 Standard_Integer anEndIndex = i + 5;
2952 nb = aLineOn2S->NbPoints();
2953 anEndIndex = (anEndIndex > nb) ? nb : anEndIndex;
2954
a2eede02 2955 if((aStartIndex > nb) || (anEndIndex <= 1)) {
7fd59977 2956 continue;
2957 }
2958 k = aStartIndex;
2959
2960 while(k <= anEndIndex) {
2961
2962 if(i != k) {
2963 IntSurf_PntOn2S p1 = aLineOn2S->Value(i);
2964 IntSurf_PntOn2S p2 = aLineOn2S->Value(k);
2965
2966 if(p1.Value().IsEqual(p2.Value(), gp::Resolution())) {
2967 aTmpWLine = aLocalWLine;
2968 aLocalWLine = new IntPatch_WLine(aLineOn2S, Standard_False);
2969
2970 for(v = 1; v <= aTmpWLine->NbVertex(); v++) {
2971 IntPatch_Point aVertex = aTmpWLine->Vertex(v);
2972 Standard_Integer avertexindex = (Standard_Integer)aVertex.ParameterOnLine();
2973
2974 if(avertexindex >= k) {
2975 aVertex.SetParameter(aVertex.ParameterOnLine() - 1.);
2976 }
2977 aLocalWLine->AddVertex(aVertex);
2978 }
2979 aLineOn2S->RemovePoint(k);
2980 anEndIndex--;
2981 continue;
2982 }
2983 }
2984 k++;
2985 }
2986 }
2987
2988 if(aLineOn2S->NbPoints() > 1) {
2989 aResult = aLocalWLine;
2990 }
2991 return aResult;
2992}
2993
2994//=======================================================================
2995//function : TolR3d
2996//purpose :
2997//=======================================================================
2998void TolR3d(const TopoDS_Face& aF1,
2999 const TopoDS_Face& aF2,
3000 Standard_Real& myTolReached3d)
3001{
3002 Standard_Real aTolF1, aTolF2, aTolFMax, aTolTresh;
3003
3004 aTolTresh=2.999999e-3;
3005 aTolF1 = BRep_Tool::Tolerance(aF1);
3006 aTolF2 = BRep_Tool::Tolerance(aF2);
3007 aTolFMax=Max(aTolF1, aTolF2);
3008
3009 if (aTolFMax>aTolTresh) {
3010 myTolReached3d=aTolFMax;
3011 }
3012}
3013//=======================================================================
3014//function : AdjustPeriodic
3015//purpose :
3016//=======================================================================
3017Standard_Real AdjustPeriodic(const Standard_Real theParameter,
3018 const Standard_Real parmin,
3019 const Standard_Real parmax,
3020 const Standard_Real thePeriod,
3021 Standard_Real& theOffset)
3022{
3023 Standard_Real aresult;
3024 //
3025 theOffset = 0.;
3026 aresult = theParameter;
3027 while(aresult < parmin) {
3028 aresult += thePeriod;
3029 theOffset += thePeriod;
3030 }
3031
3032 while(aresult > parmax) {
3033 aresult -= thePeriod;
3034 theOffset -= thePeriod;
3035 }
3036 return aresult;
3037}
3038//=======================================================================
3039//function : IsPointOnBoundary
3040//purpose :
3041//=======================================================================
3042Standard_Boolean IsPointOnBoundary(const Standard_Real theParameter,
3043 const Standard_Real theFirstBoundary,
3044 const Standard_Real theSecondBoundary,
3045 const Standard_Real theResolution,
3046 Standard_Boolean& IsOnFirstBoundary)
3047{
3048 Standard_Boolean bRet;
3049 Standard_Integer i;
3050 Standard_Real adist;
3051 //
3052 bRet=Standard_False;
3053 for(i = 0; i < 2; ++i) {
3054 IsOnFirstBoundary = (i == 0);
3055 if (IsOnFirstBoundary) {
3056 adist = fabs(theParameter - theFirstBoundary);
3057 }
3058 else {
3059 adist = fabs(theParameter - theSecondBoundary);
3060 }
3061 if(adist < theResolution) {
3062 return !bRet;
3063 }
3064 }
3065 return bRet;
3066}
3067// ------------------------------------------------------------------------------------------------
3068// static function: FindPoint
3069// purpose:
3070// ------------------------------------------------------------------------------------------------
3071Standard_Boolean FindPoint(const gp_Pnt2d& theFirstPoint,
3072 const gp_Pnt2d& theLastPoint,
3073 const Standard_Real theUmin,
3074 const Standard_Real theUmax,
3075 const Standard_Real theVmin,
3076 const Standard_Real theVmax,
3077 gp_Pnt2d& theNewPoint) {
3078
3079 gp_Vec2d aVec(theFirstPoint, theLastPoint);
3080 Standard_Integer i = 0, j = 0;
3081
3082 for(i = 0; i < 4; i++) {
3083 gp_Vec2d anOtherVec;
3084 gp_Vec2d anOtherVecNormal;
3085 gp_Pnt2d aprojpoint = theLastPoint;
3086
3087 if((i % 2) == 0) {
3088 anOtherVec.SetX(0.);
3089 anOtherVec.SetY(1.);
3090 anOtherVecNormal.SetX(1.);
3091 anOtherVecNormal.SetY(0.);
3092
3093 if(i < 2)
3094 aprojpoint.SetX(theUmin);
3095 else
3096 aprojpoint.SetX(theUmax);
3097 }
3098 else {
3099 anOtherVec.SetX(1.);
3100 anOtherVec.SetY(0.);
3101 anOtherVecNormal.SetX(0.);
3102 anOtherVecNormal.SetY(1.);
3103
3104 if(i < 2)
3105 aprojpoint.SetY(theVmin);
3106 else
3107 aprojpoint.SetY(theVmax);
3108 }
3109 gp_Vec2d anormvec = aVec;
3110 anormvec.Normalize();
fa9681ca 3111 RefineVector(anormvec);
7fd59977 3112 Standard_Real adot1 = anormvec.Dot(anOtherVecNormal);
3113
3114 if(fabs(adot1) < Precision::Angular())
3115 continue;
3116 Standard_Real adist = 0.;
3117 Standard_Boolean bIsOut = Standard_False;
3118
3119 if((i % 2) == 0) {
3120 adist = (i < 2) ? fabs(theLastPoint.X() - theUmin) : fabs(theLastPoint.X() - theUmax);
3121 bIsOut = (i < 2) ? (theLastPoint.X() < theUmin) : (theLastPoint.X() > theUmax);
3122 }
3123 else {
3124 adist = (i < 2) ? fabs(theLastPoint.Y() - theVmin) : fabs(theLastPoint.Y() - theVmax);
3125 bIsOut = (i < 2) ? (theLastPoint.Y() < theVmin) : (theLastPoint.Y() > theVmax);
3126 }
3127 Standard_Real anoffset = adist * anOtherVec.Dot(anormvec) / adot1;
3128
3129 for(j = 0; j < 2; j++) {
3130 anoffset = (j == 0) ? anoffset : -anoffset;
3131 gp_Pnt2d acurpoint(aprojpoint.XY() + (anOtherVec.XY()*anoffset));
3132 gp_Vec2d acurvec(theLastPoint, acurpoint);
3133 if ( bIsOut )
3134 acurvec.Reverse();
3135
9e9df9d9
P
3136 Standard_Real aDotX, anAngleX;
3137 //
3138 aDotX = aVec.Dot(acurvec);
3139 anAngleX = aVec.Angle(acurvec);
3140 //
3141 if(aDotX > 0. && fabs(anAngleX) < Precision::PConfusion()) {
7fd59977 3142 if((i % 2) == 0) {
3143 if((acurpoint.Y() >= theVmin) &&
3144 (acurpoint.Y() <= theVmax)) {
3145 theNewPoint = acurpoint;
3146 return Standard_True;
3147 }
3148 }
3149 else {
3150 if((acurpoint.X() >= theUmin) &&
3151 (acurpoint.X() <= theUmax)) {
3152 theNewPoint = acurpoint;
3153 return Standard_True;
3154 }
3155 }
3156 }
3157 }
3158 }
3159 return Standard_False;
3160}
3161
3162
3163// ------------------------------------------------------------------------------------------------
3164// static function: FindPoint
3165// purpose: Find point on the boundary of radial tangent zone
3166// ------------------------------------------------------------------------------------------------
3167Standard_Boolean FindPoint(const gp_Pnt2d& theFirstPoint,
3168 const gp_Pnt2d& theLastPoint,
3169 const Standard_Real theUmin,
3170 const Standard_Real theUmax,
3171 const Standard_Real theVmin,
3172 const Standard_Real theVmax,
3173 const gp_Pnt2d& theTanZoneCenter,
3174 const Standard_Real theZoneRadius,
3175 Handle(GeomAdaptor_HSurface) theGASurface,
3176 gp_Pnt2d& theNewPoint) {
3177 theNewPoint = theLastPoint;
3178
3179 if ( !IsInsideTanZone( theLastPoint, theTanZoneCenter, theZoneRadius, theGASurface) )
3180 return Standard_False;
3181
3182 Standard_Real aUResolution = theGASurface->UResolution( theZoneRadius );
3183 Standard_Real aVResolution = theGASurface->VResolution( theZoneRadius );
3184
3185 Standard_Real aRadius = ( aUResolution < aVResolution ) ? aUResolution : aVResolution;
3186 gp_Ax22d anAxis( theTanZoneCenter, gp_Dir2d(1, 0), gp_Dir2d(0, 1) );
3187 gp_Circ2d aCircle( anAxis, aRadius );
3188
3189 //
3190 gp_Vec2d aDir( theLastPoint.XY() - theFirstPoint.XY() );
3191 Standard_Real aLength = aDir.Magnitude();
3192 if ( aLength <= gp::Resolution() )
3193 return Standard_False;
3194 gp_Lin2d aLine( theFirstPoint, aDir );
3195
3196 //
3197 Handle(Geom2d_Line) aCLine = new Geom2d_Line( aLine );
3198 Handle(Geom2d_TrimmedCurve) aC1 = new Geom2d_TrimmedCurve( aCLine, 0, aLength );
3199 Handle(Geom2d_Circle) aC2 = new Geom2d_Circle( aCircle );
3200
3201 Standard_Real aTol = aRadius * 0.001;
3202 aTol = ( aTol < Precision::PConfusion() ) ? Precision::PConfusion() : aTol;
3203
3204 Geom2dAPI_InterCurveCurve anIntersector;
3205 anIntersector.Init( aC1, aC2, aTol );
3206
3207 if ( anIntersector.NbPoints() == 0 )
3208 return Standard_False;
3209
3210 Standard_Boolean aFound = Standard_False;
3211 Standard_Real aMinDist = aLength * aLength;
3212 Standard_Integer i = 0;
3213 for ( i = 1; i <= anIntersector.NbPoints(); i++ ) {
3214 gp_Pnt2d aPInt = anIntersector.Point( i );
3215 if ( aPInt.SquareDistance( theFirstPoint ) < aMinDist ) {
3216 if ( ( aPInt.X() >= theUmin ) && ( aPInt.X() <= theUmax ) &&
3217 ( aPInt.Y() >= theVmin ) && ( aPInt.Y() <= theVmax ) ) {
3218 theNewPoint = aPInt;
3219 aFound = Standard_True;
3220 }
3221 }
3222 }
3223
3224 return aFound;
3225}
3226
3227// ------------------------------------------------------------------------------------------------
3228// static function: IsInsideTanZone
3229// purpose: Check if point is inside a radial tangent zone
3230// ------------------------------------------------------------------------------------------------
3231Standard_Boolean IsInsideTanZone(const gp_Pnt2d& thePoint,
3232 const gp_Pnt2d& theTanZoneCenter,
3233 const Standard_Real theZoneRadius,
3234 Handle(GeomAdaptor_HSurface) theGASurface) {
3235
3236 Standard_Real aUResolution = theGASurface->UResolution( theZoneRadius );
3237 Standard_Real aVResolution = theGASurface->VResolution( theZoneRadius );
3238 Standard_Real aRadiusSQR = ( aUResolution < aVResolution ) ? aUResolution : aVResolution;
3239 aRadiusSQR *= aRadiusSQR;
3240 if ( thePoint.SquareDistance( theTanZoneCenter ) <= aRadiusSQR )
3241 return Standard_True;
3242 return Standard_False;
3243}
3244
3245// ------------------------------------------------------------------------------------------------
3246// static function: CheckTangentZonesExist
3247// purpose: Check if tangent zone exists
3248// ------------------------------------------------------------------------------------------------
3249Standard_Boolean CheckTangentZonesExist( const Handle(GeomAdaptor_HSurface)& theSurface1,
3250 const Handle(GeomAdaptor_HSurface)& theSurface2 )
3251{
3252 if ( ( theSurface1->GetType() != GeomAbs_Torus ) ||
3253 ( theSurface2->GetType() != GeomAbs_Torus ) )
3254 return Standard_False;
3255
7fd59977 3256 gp_Torus aTor1 = theSurface1->Torus();
3257 gp_Torus aTor2 = theSurface2->Torus();
3258
3259 if ( aTor1.Location().Distance( aTor2.Location() ) > Precision::Confusion() )
3260 return Standard_False;
3261
3262 if ( ( fabs( aTor1.MajorRadius() - aTor2.MajorRadius() ) > Precision::Confusion() ) ||
3263 ( fabs( aTor1.MinorRadius() - aTor2.MinorRadius() ) > Precision::Confusion() ) )
3264 return Standard_False;
3265
3266 if ( ( aTor1.MajorRadius() < aTor1.MinorRadius() ) ||
3267 ( aTor2.MajorRadius() < aTor2.MinorRadius() ) )
3268 return Standard_False;
3269 return Standard_True;
3270}
3271
3272// ------------------------------------------------------------------------------------------------
3273// static function: ComputeTangentZones
3274// purpose:
3275// ------------------------------------------------------------------------------------------------
3276Standard_Integer ComputeTangentZones( const Handle(GeomAdaptor_HSurface)& theSurface1,
3277 const Handle(GeomAdaptor_HSurface)& theSurface2,
3278 const TopoDS_Face& theFace1,
3279 const TopoDS_Face& theFace2,
3280 Handle(TColgp_HArray1OfPnt2d)& theResultOnS1,
3281 Handle(TColgp_HArray1OfPnt2d)& theResultOnS2,
4f189102 3282 Handle(TColStd_HArray1OfReal)& theResultRadius,
4e57c75e 3283 const Handle(BOPInt_Context)& aContext)
4f189102 3284{
7fd59977 3285 Standard_Integer aResult = 0;
3286 if ( !CheckTangentZonesExist( theSurface1, theSurface2 ) )
3287 return aResult;
3288
7fd59977 3289
3290 TColgp_SequenceOfPnt2d aSeqResultS1, aSeqResultS2;
3291 TColStd_SequenceOfReal aSeqResultRad;
3292
3293 gp_Torus aTor1 = theSurface1->Torus();
3294 gp_Torus aTor2 = theSurface2->Torus();
3295
3296 gp_Ax2 anax1( aTor1.Location(), aTor1.Axis().Direction() );
3297 gp_Ax2 anax2( aTor2.Location(), aTor2.Axis().Direction() );
3298 Standard_Integer j = 0;
3299
3300 for ( j = 0; j < 2; j++ ) {
3301 Standard_Real aCoef = ( j == 0 ) ? -1 : 1;
3302 Standard_Real aRadius1 = fabs(aTor1.MajorRadius() + aCoef * aTor1.MinorRadius());
3303 Standard_Real aRadius2 = fabs(aTor2.MajorRadius() + aCoef * aTor2.MinorRadius());
3304
3305 gp_Circ aCircle1( anax1, aRadius1 );
3306 gp_Circ aCircle2( anax2, aRadius2 );
3307
3308 // roughly compute radius of tangent zone for perpendicular case
3309 Standard_Real aCriteria = Precision::Confusion() * 0.5;
3310
3311 Standard_Real aT1 = aCriteria;
3312 Standard_Real aT2 = aCriteria;
3313 if ( j == 0 ) {
3314 // internal tangency
3315 Standard_Real aR = ( aRadius1 > aTor2.MinorRadius() ) ? aRadius1 : aTor2.MinorRadius();
3316 //aT1 = aCriteria * aCriteria + aR * aR - ( aR - aCriteria ) * ( aR - aCriteria );
3317 aT1 = 2. * aR * aCriteria;
3318 aT2 = aT1;
3319 }
3320 else {
3321 // external tangency
3322 Standard_Real aRb = ( aRadius1 > aTor2.MinorRadius() ) ? aRadius1 : aTor2.MinorRadius();
3323 Standard_Real aRm = ( aRadius1 < aTor2.MinorRadius() ) ? aRadius1 : aTor2.MinorRadius();
3324 Standard_Real aDelta = aRb - aCriteria;
3325 aDelta *= aDelta;
3326 aDelta -= aRm * aRm;
3327 aDelta /= 2. * (aRb - aRm);
3328 aDelta -= 0.5 * (aRb - aRm);
3329
3330 aT1 = 2. * aRm * (aRm - aDelta);
3331 aT2 = aT1;
3332 }
3333 aCriteria = ( aT1 > aT2) ? aT1 : aT2;
3334 if ( aCriteria > 0 )
3335 aCriteria = sqrt( aCriteria );
3336
3337 if ( aCriteria > 0.5 * aTor1.MinorRadius() ) {
3338 // too big zone -> drop to minimum
3339 aCriteria = Precision::Confusion();
3340 }
3341
3342 GeomAdaptor_Curve aC1( new Geom_Circle(aCircle1) );
3343 GeomAdaptor_Curve aC2( new Geom_Circle(aCircle2) );
c6541a0c 3344 Extrema_ExtCC anExtrema(aC1, aC2, 0, 2. * M_PI, 0, 2. * M_PI,
7fd59977 3345 Precision::PConfusion(), Precision::PConfusion());
3346
3347 if ( anExtrema.IsDone() ) {
3348
3349 Standard_Integer i = 0;
3350 for ( i = 1; i <= anExtrema.NbExt(); i++ ) {
3351 if ( anExtrema.SquareDistance(i) > aCriteria * aCriteria )
3352 continue;
3353
3354 Extrema_POnCurv P1, P2;
3355 anExtrema.Points( i, P1, P2 );
3356
3357 Standard_Boolean bFoundResult = Standard_True;
3358 gp_Pnt2d pr1, pr2;
3359
3360 Standard_Integer surfit = 0;
3361 for ( surfit = 0; surfit < 2; surfit++ ) {
4f189102
P
3362 GeomAPI_ProjectPointOnSurf& aProjector =
3363 (surfit == 0) ? aContext->ProjPS(theFace1) : aContext->ProjPS(theFace2);
7fd59977 3364
3365 gp_Pnt aP3d = (surfit == 0) ? P1.Value() : P2.Value();
3366 aProjector.Perform(aP3d);
3367
3368 if(!aProjector.IsDone())
3369 bFoundResult = Standard_False;
3370 else {
3371 if(aProjector.LowerDistance() > aCriteria) {
3372 bFoundResult = Standard_False;
3373 }
3374 else {
3375 Standard_Real foundU = 0, foundV = 0;
3376 aProjector.LowerDistanceParameters(foundU, foundV);
3377 if ( surfit == 0 )
3378 pr1 = gp_Pnt2d( foundU, foundV );
3379 else
3380 pr2 = gp_Pnt2d( foundU, foundV );
3381 }
3382 }
3383 }
3384 if ( bFoundResult ) {
3385 aSeqResultS1.Append( pr1 );
3386 aSeqResultS2.Append( pr2 );
3387 aSeqResultRad.Append( aCriteria );
3388
3389 // torus is u and v periodic
c6541a0c 3390 const Standard_Real twoPI = M_PI + M_PI;
7fd59977 3391 Standard_Real arr1tmp[2] = {pr1.X(), pr1.Y()};
3392 Standard_Real arr2tmp[2] = {pr2.X(), pr2.Y()};
3393
3394 // iteration on period bounds
3395 for ( Standard_Integer k1 = 0; k1 < 2; k1++ ) {
3396 Standard_Real aBound = ( k1 == 0 ) ? 0 : twoPI;
3397 Standard_Real aShift = ( k1 == 0 ) ? twoPI : -twoPI;
3398
3399 // iteration on surfaces
3400 for ( Standard_Integer k2 = 0; k2 < 2; k2++ ) {
3401 Standard_Real* arr1 = ( k2 == 0 ) ? arr1tmp : arr2tmp;
3402 Standard_Real* arr2 = ( k2 != 0 ) ? arr1tmp : arr2tmp;
3403 TColgp_SequenceOfPnt2d& aSeqS1 = ( k2 == 0 ) ? aSeqResultS1 : aSeqResultS2;
3404 TColgp_SequenceOfPnt2d& aSeqS2 = ( k2 != 0 ) ? aSeqResultS1 : aSeqResultS2;
3405
3406 if (fabs(arr1[0] - aBound) < Precision::PConfusion()) {
3407 aSeqS1.Append( gp_Pnt2d( arr1[0] + aShift, arr1[1] ) );
3408 aSeqS2.Append( gp_Pnt2d( arr2[0], arr2[1] ) );
3409 aSeqResultRad.Append( aCriteria );
3410 }
3411 if (fabs(arr1[1] - aBound) < Precision::PConfusion()) {
3412 aSeqS1.Append( gp_Pnt2d( arr1[0], arr1[1] + aShift) );
3413 aSeqS2.Append( gp_Pnt2d( arr2[0], arr2[1] ) );
3414 aSeqResultRad.Append( aCriteria );
3415 }
3416 }
3417 } //
3418 }
3419 }
3420 }
3421 }
3422 aResult = aSeqResultRad.Length();
3423
3424 if ( aResult > 0 ) {
3425 theResultOnS1 = new TColgp_HArray1OfPnt2d( 1, aResult );
3426 theResultOnS2 = new TColgp_HArray1OfPnt2d( 1, aResult );
3427 theResultRadius = new TColStd_HArray1OfReal( 1, aResult );
3428
3429 for ( Standard_Integer i = 1 ; i <= aResult; i++ ) {
3430 theResultOnS1->SetValue( i, aSeqResultS1.Value(i) );
3431 theResultOnS2->SetValue( i, aSeqResultS2.Value(i) );
3432 theResultRadius->SetValue( i, aSeqResultRad.Value(i) );
3433 }
3434 }
3435 return aResult;
3436}
3437
3438// ------------------------------------------------------------------------------------------------
3439// static function: AdjustByNeighbour
3440// purpose:
3441// ------------------------------------------------------------------------------------------------
3442gp_Pnt2d AdjustByNeighbour(const gp_Pnt2d& theaNeighbourPoint,
3443 const gp_Pnt2d& theOriginalPoint,
3444 Handle(GeomAdaptor_HSurface) theGASurface) {
3445
3446 gp_Pnt2d ap1 = theaNeighbourPoint;
3447 gp_Pnt2d ap2 = theOriginalPoint;
3448
3449 if ( theGASurface->IsUPeriodic() ) {
3450 Standard_Real aPeriod = theGASurface->UPeriod();
3451 gp_Pnt2d aPTest = ap2;
3452 Standard_Real aSqDistMin = 1.e+100;
3453
3454 for ( Standard_Integer pIt = -1; pIt <= 1; pIt++) {
3455 aPTest.SetX( theOriginalPoint.X() + aPeriod * pIt );
3456 Standard_Real dd = ap1.SquareDistance( aPTest );
3457
3458 if ( dd < aSqDistMin ) {
3459 ap2 = aPTest;
3460 aSqDistMin = dd;
3461 }
3462 }
3463 }
3464 if ( theGASurface->IsVPeriodic() ) {
3465 Standard_Real aPeriod = theGASurface->VPeriod();
3466 gp_Pnt2d aPTest = ap2;
3467 Standard_Real aSqDistMin = 1.e+100;
3468
3469 for ( Standard_Integer pIt = -1; pIt <= 1; pIt++) {
3470 aPTest.SetY( theOriginalPoint.Y() + aPeriod * pIt );
3471 Standard_Real dd = ap1.SquareDistance( aPTest );
3472
3473 if ( dd < aSqDistMin ) {
3474 ap2 = aPTest;
3475 aSqDistMin = dd;
3476 }
3477 }
3478 }
3479 return ap2;
3480}
3481
3482// ------------------------------------------------------------------------------------------------
3483//function: DecompositionOfWLine
3484// purpose:
3485// ------------------------------------------------------------------------------------------------
3486Standard_Boolean DecompositionOfWLine(const Handle(IntPatch_WLine)& theWLine,
3487 const Handle(GeomAdaptor_HSurface)& theSurface1,
3488 const Handle(GeomAdaptor_HSurface)& theSurface2,
3489 const TopoDS_Face& theFace1,
3490 const TopoDS_Face& theFace2,
3491 const IntTools_LineConstructor& theLConstructor,
3492 const Standard_Boolean theAvoidLConstructor,
3493 IntPatch_SequenceOfLine& theNewLines,
4f189102 3494 Standard_Real& theReachedTol3d,
4e57c75e 3495 const Handle(BOPInt_Context)& aContext)
4f189102 3496{
7fd59977 3497
3498 Standard_Boolean bRet, bAvoidLineConstructor;
3499 Standard_Integer aNbPnts, aNbParts;
3500 //
3501 bRet=Standard_False;
3502 aNbPnts=theWLine->NbPnts();
3503 bAvoidLineConstructor=theAvoidLConstructor;
3504 //
3505 if(!aNbPnts){
3506 return bRet;
3507 }
3508 if (!bAvoidLineConstructor) {
3509 aNbParts=theLConstructor.NbParts();
3510 if (!aNbParts) {
3511 return bRet;
3512 }
3513 }
3514 //
3515 Standard_Boolean bIsPrevPointOnBoundary, bIsPointOnBoundary, bIsCurrentPointOnBoundary;
3516 Standard_Integer nblines, pit, i, j;
3517 Standard_Real aTol;
3518 TColStd_Array1OfListOfInteger anArrayOfLines(1, aNbPnts);
3519 TColStd_Array1OfInteger anArrayOfLineType(1, aNbPnts);
3520 TColStd_ListOfInteger aListOfPointIndex;
7fd59977 3521
3522 Handle(TColgp_HArray1OfPnt2d) aTanZoneS1;
3523 Handle(TColgp_HArray1OfPnt2d) aTanZoneS2;
3524 Handle(TColStd_HArray1OfReal) aTanZoneRadius;
3525 Standard_Integer aNbZone = ComputeTangentZones( theSurface1, theSurface2, theFace1, theFace2,
4f189102 3526 aTanZoneS1, aTanZoneS2, aTanZoneRadius, aContext);
7fd59977 3527
3528 //
3529 nblines=0;
3530 aTol=Precision::Confusion();
3531 aTol=0.5*aTol;
3532 bIsPrevPointOnBoundary=Standard_False;
3533 bIsPointOnBoundary=Standard_False;
3534 //
3535 // 1. ...
3536 //
3537 // Points
3538 for(pit = 1; pit <= aNbPnts; ++pit) {
3539 Standard_Boolean bIsOnFirstBoundary, isperiodic;
3540 Standard_Real aResolution, aPeriod, alowerboundary, aupperboundary, U, V;
3541 Standard_Real aParameter, anoffset, anAdjustPar;
3542 Standard_Real umin, umax, vmin, vmax;
3543 //
3544 bIsCurrentPointOnBoundary = Standard_False;
3545 const IntSurf_PntOn2S& aPoint = theWLine->Point(pit);
3546 //
3547 // Surface
3548 for(i = 0; i < 2; ++i) {
3549 Handle(GeomAdaptor_HSurface) aGASurface = (!i) ? theSurface1 : theSurface2;
3550 aGASurface->ChangeSurface().Surface()->Bounds(umin, umax, vmin, vmax);
3551 if(!i) {
3552 aPoint.ParametersOnS1(U, V);
3553 }
3554 else {
3555 aPoint.ParametersOnS2(U, V);
3556 }
3557 // U, V
3558 for(j = 0; j < 2; j++) {
3559 isperiodic = (!j) ? aGASurface->IsUPeriodic() : aGASurface->IsVPeriodic();
3560 if(!isperiodic){
3561 continue;
3562 }
3563 //
3564 if (!j) {
3565 aResolution=aGASurface->UResolution(aTol);
3566 aPeriod=aGASurface->UPeriod();
3567 alowerboundary=umin;
3568 aupperboundary=umax;
3569 aParameter=U;
3570 }
3571 else {
3572 aResolution=aGASurface->VResolution(aTol);
3573 aPeriod=aGASurface->VPeriod();
3574 alowerboundary=vmin;
3575 aupperboundary=vmax;
3576 aParameter=V;
3577 }
3578
3579 anoffset = 0.;
3580 anAdjustPar = AdjustPeriodic(aParameter,
3581 alowerboundary,
3582 aupperboundary,
3583 aPeriod,
3584 anoffset);
3585 //
3586 bIsOnFirstBoundary = Standard_True;// ?
3587 bIsPointOnBoundary=
3588 IsPointOnBoundary(anAdjustPar,
3589 alowerboundary,
3590 aupperboundary,
3591 aResolution,
3592 bIsOnFirstBoundary);
3593 //
3594 if(bIsPointOnBoundary) {
3595 bIsCurrentPointOnBoundary = Standard_True;
3596 break;
3597 }
3598 else {
3599 // check if a point belong to a tangent zone. Begin
3600 Standard_Integer zIt = 0;
3601 for ( zIt = 1; zIt <= aNbZone; zIt++ ) {
3602 gp_Pnt2d aPZone = (i == 0) ? aTanZoneS1->Value(zIt) : aTanZoneS2->Value(zIt);
3603 Standard_Real aZoneRadius = aTanZoneRadius->Value(zIt);
3604
3605 if ( IsInsideTanZone(gp_Pnt2d( U, V ), aPZone, aZoneRadius, aGASurface ) ) {
3606 // set boundary flag to split the curve by a tangent zone
3607 bIsPointOnBoundary = Standard_True;
3608 bIsCurrentPointOnBoundary = Standard_True;
3609 if ( theReachedTol3d < aZoneRadius ) {
3610 theReachedTol3d = aZoneRadius;
3611 }
3612 break;
3613 }
3614 }
3615 }
3616 }//for(j = 0; j < 2; j++) {
3617
3618 if(bIsCurrentPointOnBoundary){
3619 break;
3620 }
3621 }//for(i = 0; i < 2; ++i) {
3622 //
3623 if((bIsCurrentPointOnBoundary != bIsPrevPointOnBoundary)) {
3624 if(!aListOfPointIndex.IsEmpty()) {
3625 nblines++;
3626 anArrayOfLines.SetValue(nblines, aListOfPointIndex);
3627 anArrayOfLineType.SetValue(nblines, bIsPrevPointOnBoundary);
3628 aListOfPointIndex.Clear();
3629 }
3630 bIsPrevPointOnBoundary = bIsCurrentPointOnBoundary;
3631 }
3632 aListOfPointIndex.Append(pit);
3633 } //for(pit = 1; pit <= aNbPnts; ++pit) {
3634 //
3635 if(!aListOfPointIndex.IsEmpty()) {
3636 nblines++;
3637 anArrayOfLines.SetValue(nblines, aListOfPointIndex);
3638 anArrayOfLineType.SetValue(nblines, bIsPrevPointOnBoundary);
3639 aListOfPointIndex.Clear();
3640 }
3641 //
3642 if(nblines<=1) {
3643 return bRet; //Standard_False;
3644 }
3645 //
3646 //
3647 // 2. Correct wlines.begin
3648 TColStd_Array1OfListOfInteger anArrayOfLineEnds(1, nblines);