[occt.git] / src / IGESDimen / IGESDimen_GeneralModule.cxx

// Copyright (c) 1999-2014 OPEN CASCADE SAS
//
// This file is part of Open CASCADE Technology software library.
//
// This library is free software; you can redistribute it and/or modify it under
// the terms of the GNU Lesser General Public License version 2.1 as published
// by the Free Software Foundation, with special exception defined in the file
// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
// distribution for complete text of the license and disclaimer of any warranty.
//
// Alternatively, this file may be used under the terms of Open CASCADE
// commercial license or contractual agreement.


#include <IGESData_DirChecker.hxx>
#include <IGESData_IGESEntity.hxx>
#include <IGESDimen_AngularDimension.hxx>
#include <IGESDimen_BasicDimension.hxx>
#include <IGESDimen_CenterLine.hxx>
#include <IGESDimen_CurveDimension.hxx>
#include <IGESDimen_DiameterDimension.hxx>
#include <IGESDimen_DimensionDisplayData.hxx>
#include <IGESDimen_DimensionedGeometry.hxx>
#include <IGESDimen_DimensionTolerance.hxx>
#include <IGESDimen_DimensionUnits.hxx>
#include <IGESDimen_FlagNote.hxx>
#include <IGESDimen_GeneralLabel.hxx>
#include <IGESDimen_GeneralModule.hxx>
#include <IGESDimen_GeneralNote.hxx>
#include <IGESDimen_GeneralSymbol.hxx>
#include <IGESDimen_LeaderArrow.hxx>
#include <IGESDimen_LinearDimension.hxx>
#include <IGESDimen_NewDimensionedGeometry.hxx>
#include <IGESDimen_NewGeneralNote.hxx>
#include <IGESDimen_OrdinateDimension.hxx>
#include <IGESDimen_PointDimension.hxx>
#include <IGESDimen_RadiusDimension.hxx>
#include <IGESDimen_Section.hxx>
#include <IGESDimen_SectionedArea.hxx>
#include <IGESDimen_ToolAngularDimension.hxx>
#include <IGESDimen_ToolBasicDimension.hxx>
#include <IGESDimen_ToolCenterLine.hxx>
#include <IGESDimen_ToolCurveDimension.hxx>
#include <IGESDimen_ToolDiameterDimension.hxx>
#include <IGESDimen_ToolDimensionDisplayData.hxx>
#include <IGESDimen_ToolDimensionedGeometry.hxx>
#include <IGESDimen_ToolDimensionTolerance.hxx>
#include <IGESDimen_ToolDimensionUnits.hxx>
#include <IGESDimen_ToolFlagNote.hxx>
#include <IGESDimen_ToolGeneralLabel.hxx>
#include <IGESDimen_ToolGeneralNote.hxx>
#include <IGESDimen_ToolGeneralSymbol.hxx>
#include <IGESDimen_ToolLeaderArrow.hxx>
#include <IGESDimen_ToolLinearDimension.hxx>
#include <IGESDimen_ToolNewDimensionedGeometry.hxx>
#include <IGESDimen_ToolNewGeneralNote.hxx>
#include <IGESDimen_ToolOrdinateDimension.hxx>
#include <IGESDimen_ToolPointDimension.hxx>
#include <IGESDimen_ToolRadiusDimension.hxx>
#include <IGESDimen_ToolSection.hxx>
#include <IGESDimen_ToolSectionedArea.hxx>
#include <IGESDimen_ToolWitnessLine.hxx>
#include <IGESDimen_WitnessLine.hxx>
#include <Interface_Category.hxx>
#include <Interface_Check.hxx>
#include <Interface_CopyTool.hxx>
#include <Interface_EntityIterator.hxx>
#include <Interface_Macros.hxx>
#include <Interface_ShareTool.hxx>
#include <Standard_Transient.hxx>
#include <Standard_Type.hxx>

IMPLEMENT_STANDARD_RTTIEXT(IGESDimen_GeneralModule,IGESData_GeneralModule)

//  Each Module is attached to a Protocol : it must interpret Case Numbers
//  (arguments <CN> of various methods) in accordance to values returned by
//  the method TypeNumber from this Protocol
IGESDimen_GeneralModule::IGESDimen_GeneralModule ()    {  }


    void  IGESDimen_GeneralModule::OwnSharedCase
  (const Standard_Integer CN, const Handle(IGESData_IGESEntity)& ent,
   Interface_EntityIterator& iter) const 
{
  switch (CN) {
    case  1 : {
      DeclareAndCast(IGESDimen_AngularDimension,anent,ent);
      if (anent.IsNull()) return;
      IGESDimen_ToolAngularDimension tool;
      tool.OwnShared(anent,iter);
    }
      break;
    case  2 : {
      DeclareAndCast(IGESDimen_BasicDimension,anent,ent);
      if (anent.IsNull()) return;
      IGESDimen_ToolBasicDimension tool;
      tool.OwnShared(anent,iter);
    }
      break;
    case  3 : {
      DeclareAndCast(IGESDimen_CenterLine,anent,ent);
      if (anent.IsNull()) return;
      IGESDimen_ToolCenterLine tool;
      tool.OwnShared(anent,iter);
    }
      break;
    case  4 : {
      DeclareAndCast(IGESDimen_CurveDimension,anent,ent);
      if (anent.IsNull()) return;
      IGESDimen_ToolCurveDimension tool;
      tool.OwnShared(anent,iter);
    }
      break;
    case  5 : {
      DeclareAndCast(IGESDimen_DiameterDimension,anent,ent);
      if (anent.IsNull()) return;
      IGESDimen_ToolDiameterDimension tool;
      tool.OwnShared(anent,iter);
    }
      break;
    case  6 : {
      DeclareAndCast(IGESDimen_DimensionDisplayData,anent,ent);
      if (anent.IsNull()) return;
      IGESDimen_ToolDimensionDisplayData tool;
      tool.OwnShared(anent,iter);
    }
      break;
    case  7 : {
      DeclareAndCast(IGESDimen_DimensionTolerance,anent,ent);
      if (anent.IsNull()) return;
      IGESDimen_ToolDimensionTolerance tool;
      tool.OwnShared(anent,iter);
    }
      break;
    case  8 : {
      DeclareAndCast(IGESDimen_DimensionUnits,anent,ent);
      if (anent.IsNull()) return;
      IGESDimen_ToolDimensionUnits tool;
      tool.OwnShared(anent,iter);
    }
      break;
    case  9 : {
      DeclareAndCast(IGESDimen_DimensionedGeometry,anent,ent);
      if (anent.IsNull()) return;
      IGESDimen_ToolDimensionedGeometry tool;
      tool.OwnShared(anent,iter);
    }
      break;
    case 10 : {
      DeclareAndCast(IGESDimen_FlagNote,anent,ent);
      if (anent.IsNull()) return;
      IGESDimen_ToolFlagNote tool;
      tool.OwnShared(anent,iter);
    }
      break;
    case 11 : {
      DeclareAndCast(IGESDimen_GeneralLabel,anent,ent);
      if (anent.IsNull()) return;
      IGESDimen_ToolGeneralLabel tool;
      tool.OwnShared(anent,iter);
    }
      break;
    case 12 : {
      DeclareAndCast(IGESDimen_GeneralNote,anent,ent);
      if (anent.IsNull()) return;
      IGESDimen_ToolGeneralNote tool;
      tool.OwnShared(anent,iter);
    }
      break;
    case 13 : {
      DeclareAndCast(IGESDimen_GeneralSymbol,anent,ent);
      if (anent.IsNull()) return;
      IGESDimen_ToolGeneralSymbol tool;
      tool.OwnShared(anent,iter);
    }
      break;
    case 14 : {
      DeclareAndCast(IGESDimen_LeaderArrow,anent,ent);
      if (anent.IsNull()) return;
      IGESDimen_ToolLeaderArrow tool;
      tool.OwnShared(anent,iter);
    }
      break;
    case 15 : {
      DeclareAndCast(IGESDimen_LinearDimension,anent,ent);
      if (anent.IsNull()) return;
      IGESDimen_ToolLinearDimension tool;
      tool.OwnShared(anent,iter);
    }
      break;
    case 16 : {
      DeclareAndCast(IGESDimen_NewDimensionedGeometry,anent,ent);
      if (anent.IsNull()) return;
      IGESDimen_ToolNewDimensionedGeometry tool;
      tool.OwnShared(anent,iter);
    }
      break;
    case 17 : {
      DeclareAndCast(IGESDimen_NewGeneralNote,anent,ent);
      if (anent.IsNull()) return;
      IGESDimen_ToolNewGeneralNote tool;
      tool.OwnShared(anent,iter);
    }
      break;
    case 18 : {
      DeclareAndCast(IGESDimen_OrdinateDimension,anent,ent);
      if (anent.IsNull()) return;
      IGESDimen_ToolOrdinateDimension tool;
      tool.OwnShared(anent,iter);
    }
      break;
    case 19 : {
      DeclareAndCast(IGESDimen_PointDimension,anent,ent);
      if (anent.IsNull()) return;
      IGESDimen_ToolPointDimension tool;
      tool.OwnShared(anent,iter);
    }
      break;
    case 20 : {
      DeclareAndCast(IGESDimen_RadiusDimension,anent,ent);
      if (anent.IsNull()) return;
      IGESDimen_ToolRadiusDimension tool;
      tool.OwnShared(anent,iter);
    }
      break;
    case 21 : {
      DeclareAndCast(IGESDimen_Section,anent,ent);
      if (anent.IsNull()) return;
      IGESDimen_ToolSection tool;
      tool.OwnShared(anent,iter);
    }
      break;
    case 22 : {
      DeclareAndCast(IGESDimen_SectionedArea,anent,ent);
      if (anent.IsNull()) return;
      IGESDimen_ToolSectionedArea tool;
      tool.OwnShared(anent,iter);
    }
      break;
    case 23 : {
      DeclareAndCast(IGESDimen_WitnessLine,anent,ent);
      if (anent.IsNull()) return;
      IGESDimen_ToolWitnessLine tool;
      tool.OwnShared(anent,iter);
    }
      break;
    default : break;
  }
}


    IGESData_DirChecker  IGESDimen_GeneralModule::DirChecker
  (const Standard_Integer CN, const Handle(IGESData_IGESEntity)& ent) const 
{
  switch (CN) {
    case  1 : {
      DeclareAndCast(IGESDimen_AngularDimension,anent,ent);
      if (anent.IsNull()) break;
      IGESDimen_ToolAngularDimension tool;
      return tool.DirChecker(anent);
    }
    case  2 : {
      DeclareAndCast(IGESDimen_BasicDimension,anent,ent);
      if (anent.IsNull()) break;
      IGESDimen_ToolBasicDimension tool;
      return tool.DirChecker(anent);
    }
    case  3 : {
      DeclareAndCast(IGESDimen_CenterLine,anent,ent);
      if (anent.IsNull()) break;
      IGESDimen_ToolCenterLine tool;
      return tool.DirChecker(anent);
    }
    case  4 : {
      DeclareAndCast(IGESDimen_CurveDimension,anent,ent);
      if (anent.IsNull()) break;
      IGESDimen_ToolCurveDimension tool;
      return tool.DirChecker(anent);
    }
    case  5 : {
      DeclareAndCast(IGESDimen_DiameterDimension,anent,ent);
      if (anent.IsNull()) break;
      IGESDimen_ToolDiameterDimension tool;
      return tool.DirChecker(anent);
    }
    case  6 : {
      DeclareAndCast(IGESDimen_DimensionDisplayData,anent,ent);
      if (anent.IsNull()) break;
      IGESDimen_ToolDimensionDisplayData tool;
      return tool.DirChecker(anent);
    }
    case  7 : {
      DeclareAndCast(IGESDimen_DimensionTolerance,anent,ent);
      if (anent.IsNull()) break;
      IGESDimen_ToolDimensionTolerance tool;
      return tool.DirChecker(anent);
    }
    case  8 : {
      DeclareAndCast(IGESDimen_DimensionUnits,anent,ent);
      if (anent.IsNull()) break;
      IGESDimen_ToolDimensionUnits tool;
      return tool.DirChecker(anent);
    }
    case  9 : {
      DeclareAndCast(IGESDimen_DimensionedGeometry,anent,ent);
      if (anent.IsNull()) break;
      IGESDimen_ToolDimensionedGeometry tool;
      return tool.DirChecker(anent);
    }
    case 10 : {
      DeclareAndCast(IGESDimen_FlagNote,anent,ent);
      if (anent.IsNull()) break;
      IGESDimen_ToolFlagNote tool;
      return tool.DirChecker(anent);
    }
    case 11 : {
      DeclareAndCast(IGESDimen_GeneralLabel,anent,ent);
      if (anent.IsNull()) break;
      IGESDimen_ToolGeneralLabel tool;
      return tool.DirChecker(anent);
    }
    case 12 : {
      DeclareAndCast(IGESDimen_GeneralNote,anent,ent);
      if (anent.IsNull()) break;
      IGESDimen_ToolGeneralNote tool;
      return tool.DirChecker(anent);
    }
    case 13 : {
      DeclareAndCast(IGESDimen_GeneralSymbol,anent,ent);
      if (anent.IsNull()) break;
      IGESDimen_ToolGeneralSymbol tool;
      return tool.DirChecker(anent);
    }
    case 14 : {
      DeclareAndCast(IGESDimen_LeaderArrow,anent,ent);
      if (anent.IsNull()) break;
      IGESDimen_ToolLeaderArrow tool;
      return tool.DirChecker(anent);
    }
    case 15 : {
      DeclareAndCast(IGESDimen_LinearDimension,anent,ent);
      if (anent.IsNull()) break;
      IGESDimen_ToolLinearDimension tool;
      return tool.DirChecker(anent);
    }
    case 16 : {
      DeclareAndCast(IGESDimen_NewDimensionedGeometry,anent,ent);
      if (anent.IsNull()) break;
      IGESDimen_ToolNewDimensionedGeometry tool;
      return tool.DirChecker(anent);
    }
    case 17 : {
      DeclareAndCast(IGESDimen_NewGeneralNote,anent,ent);
      if (anent.IsNull()) break;
      IGESDimen_ToolNewGeneralNote tool;
      return tool.DirChecker(anent);
    }
    case 18 : {
      DeclareAndCast(IGESDimen_OrdinateDimension,anent,ent);
      if (anent.IsNull()) break;
      IGESDimen_ToolOrdinateDimension tool;
      return tool.DirChecker(anent);
    }
    case 19 : {
      DeclareAndCast(IGESDimen_PointDimension,anent,ent);
      if (anent.IsNull()) break;
      IGESDimen_ToolPointDimension tool;
      return tool.DirChecker(anent);
    }
    case 20 : {
      DeclareAndCast(IGESDimen_RadiusDimension,anent,ent);
      if (anent.IsNull()) break;
      IGESDimen_ToolRadiusDimension tool;
      return tool.DirChecker(anent);
    }
    case 21 : {
      DeclareAndCast(IGESDimen_Section,anent,ent);
      if (anent.IsNull()) break;
      IGESDimen_ToolSection tool;
      return tool.DirChecker(anent);
    }
    case 22 : {
      DeclareAndCast(IGESDimen_SectionedArea,anent,ent);
      if (anent.IsNull()) break;
      IGESDimen_ToolSectionedArea tool;
      return tool.DirChecker(anent);
    }
    case 23 : {
      DeclareAndCast(IGESDimen_WitnessLine,anent,ent);
      if (anent.IsNull()) break;
      IGESDimen_ToolWitnessLine tool;
      return tool.DirChecker(anent);
    }
    default : break;
  }
  return IGESData_DirChecker();    // by default, no specific criterium
}


    void  IGESDimen_GeneralModule::OwnCheckCase
  (const Standard_Integer CN, const Handle(IGESData_IGESEntity)& ent,
   const Interface_ShareTool& shares, Handle(Interface_Check)& ach) const 
{
  switch (CN) {
    case  1 : {
      DeclareAndCast(IGESDimen_AngularDimension,anent,ent);
      if (anent.IsNull()) return;
      IGESDimen_ToolAngularDimension tool;
      tool.OwnCheck(anent,shares,ach);
    }
      break;
    case  2 : {
      DeclareAndCast(IGESDimen_BasicDimension,anent,ent);
      if (anent.IsNull()) return;
      IGESDimen_ToolBasicDimension tool;
      tool.OwnCheck(anent,shares,ach);
    }
      break;
    case  3 : {
      DeclareAndCast(IGESDimen_CenterLine,anent,ent);
      if (anent.IsNull()) return;
      IGESDimen_ToolCenterLine tool;
      tool.OwnCheck(anent,shares,ach);
    }
      break;
    case  4 : {
      DeclareAndCast(IGESDimen_CurveDimension,anent,ent);
      if (anent.IsNull()) return;
      IGESDimen_ToolCurveDimension tool;
      tool.OwnCheck(anent,shares,ach);
    }
      break;
    case  5 : {
      DeclareAndCast(IGESDimen_DiameterDimension,anent,ent);
      if (anent.IsNull()) return;
      IGESDimen_ToolDiameterDimension tool;
      tool.OwnCheck(anent,shares,ach);
    }
      break;
    case  6 : {
      DeclareAndCast(IGESDimen_DimensionDisplayData,anent,ent);
      if (anent.IsNull()) return;
      IGESDimen_ToolDimensionDisplayData tool;
      tool.OwnCheck(anent,shares,ach);
    }
      break;
    case  7 : {
      DeclareAndCast(IGESDimen_DimensionTolerance,anent,ent);
      if (anent.IsNull()) return;
      IGESDimen_ToolDimensionTolerance tool;
      tool.OwnCheck(anent,shares,ach);
    }
      break;
    case  8 : {
      DeclareAndCast(IGESDimen_DimensionUnits,anent,ent);
      if (anent.IsNull()) return;
      IGESDimen_ToolDimensionUnits tool;
      tool.OwnCheck(anent,shares,ach);
    }
      break;
    case  9 : {
      DeclareAndCast(IGESDimen_DimensionedGeometry,anent,ent);
      if (anent.IsNull()) return;
      IGESDimen_ToolDimensionedGeometry tool;
      tool.OwnCheck(anent,shares,ach);
    }
      break;
    case 10 : {
      DeclareAndCast(IGESDimen_FlagNote,anent,ent);
      if (anent.IsNull()) return;
      IGESDimen_ToolFlagNote tool;
      tool.OwnCheck(anent,shares,ach);
    }
      break;
    case 11 : {
      DeclareAndCast(IGESDimen_GeneralLabel,anent,ent);
      if (anent.IsNull()) return;
      IGESDimen_ToolGeneralLabel tool;
      tool.OwnCheck(anent,shares,ach);
    }
      break;
    case 12 : {
      DeclareAndCast(IGESDimen_GeneralNote,anent,ent);
      if (anent.IsNull()) return;
      IGESDimen_ToolGeneralNote tool;
      tool.OwnCheck(anent,shares,ach);
    }
      break;
    case 13 : {
      DeclareAndCast(IGESDimen_GeneralSymbol,anent,ent);
      if (anent.IsNull()) return;
      IGESDimen_ToolGeneralSymbol tool;
      tool.OwnCheck(anent,shares,ach);
    }
      break;
    case 14 : {
      DeclareAndCast(IGESDimen_LeaderArrow,anent,ent);
      if (anent.IsNull()) return;
      IGESDimen_ToolLeaderArrow tool;
      tool.OwnCheck(anent,shares,ach);
    }
      break;
    case 15 : {
      DeclareAndCast(IGESDimen_LinearDimension,anent,ent);
      if (anent.IsNull()) return;
      IGESDimen_ToolLinearDimension tool;
      tool.OwnCheck(anent,shares,ach);
    }
      break;
    case 16 : {
      DeclareAndCast(IGESDimen_NewDimensionedGeometry,anent,ent);
      if (anent.IsNull()) return;
      IGESDimen_ToolNewDimensionedGeometry tool;
      tool.OwnCheck(anent,shares,ach);
    }
      break;
    case 17 : {
      DeclareAndCast(IGESDimen_NewGeneralNote,anent,ent);
      if (anent.IsNull()) return;
      IGESDimen_ToolNewGeneralNote tool;
      tool.OwnCheck(anent,shares,ach);
    }
      break;
    case 18 : {
      DeclareAndCast(IGESDimen_OrdinateDimension,anent,ent);
      if (anent.IsNull()) return;
      IGESDimen_ToolOrdinateDimension tool;
      tool.OwnCheck(anent,shares,ach);
    }
      break;
    case 19 : {
      DeclareAndCast(IGESDimen_PointDimension,anent,ent);
      if (anent.IsNull()) return;
      IGESDimen_ToolPointDimension tool;
      tool.OwnCheck(anent,shares,ach);
    }
      break;
    case 20 : {
      DeclareAndCast(IGESDimen_RadiusDimension,anent,ent);
      if (anent.IsNull()) return;
      IGESDimen_ToolRadiusDimension tool;
      tool.OwnCheck(anent,shares,ach);
    }
      break;
    case 21 : {
      DeclareAndCast(IGESDimen_Section,anent,ent);
      if (anent.IsNull()) return;
      IGESDimen_ToolSection tool;
      tool.OwnCheck(anent,shares,ach);
    }
      break;
    case 22 : {
      DeclareAndCast(IGESDimen_SectionedArea,anent,ent);
      if (anent.IsNull()) return;
      IGESDimen_ToolSectionedArea tool;
      tool.OwnCheck(anent,shares,ach);
    }
      break;
    case 23 : {
      DeclareAndCast(IGESDimen_WitnessLine,anent,ent);
      if (anent.IsNull()) return;
      IGESDimen_ToolWitnessLine tool;
      tool.OwnCheck(anent,shares,ach);
    }
      break;
    default : break;
  }
}


    Standard_Boolean  IGESDimen_GeneralModule::NewVoid
  (const Standard_Integer CN, Handle(Standard_Transient)& ent) const 
{
  switch (CN) {
    case  1 : ent = new IGESDimen_AngularDimension;	break;
    case  2 : ent = new IGESDimen_BasicDimension;	break;
    case  3 : ent = new IGESDimen_CenterLine;		break;
    case  4 : ent = new IGESDimen_CurveDimension;	break;
    case  5 : ent = new IGESDimen_DiameterDimension;	break;
    case  6 : ent = new IGESDimen_DimensionDisplayData;	break;
    case  7 : ent = new IGESDimen_DimensionTolerance;	break;
    case  8 : ent = new IGESDimen_DimensionUnits;	break;
    case  9 : ent = new IGESDimen_DimensionedGeometry;	break;
    case 10 : ent = new IGESDimen_FlagNote;		break;
    case 11 : ent = new IGESDimen_GeneralLabel;		break;
    case 12 : ent = new IGESDimen_GeneralNote;		break;
    case 13 : ent = new IGESDimen_GeneralSymbol;	break;
    case 14 : ent = new IGESDimen_LeaderArrow;		break;
    case 15 : ent = new IGESDimen_LinearDimension;	break;
    case 16 : ent = new IGESDimen_NewDimensionedGeometry;	break;
    case 17 : ent = new IGESDimen_NewGeneralNote;	break;
    case 18 : ent = new IGESDimen_OrdinateDimension;	break;
    case 19 : ent = new IGESDimen_PointDimension;	break;
    case 20 : ent = new IGESDimen_RadiusDimension;	break;
    case 21 : ent = new IGESDimen_Section;		break;
    case 22 : ent = new IGESDimen_SectionedArea;	break;
    case 23 : ent = new IGESDimen_WitnessLine;		break;
    default : return Standard_False;    // by default, Failure on Recognize
  }
  return Standard_True;
}


    void  IGESDimen_GeneralModule::OwnCopyCase
  (const Standard_Integer CN,
   const Handle(IGESData_IGESEntity)& entfrom,
   const Handle(IGESData_IGESEntity)& entto,
   Interface_CopyTool& TC) const 
{
  switch (CN) {
    case  1 : {
      DeclareAndCast(IGESDimen_AngularDimension,enfr,entfrom);
      DeclareAndCast(IGESDimen_AngularDimension,ento,entto);
      IGESDimen_ToolAngularDimension tool;
      tool.OwnCopy(enfr,ento,TC);
    }
      break;
    case  2 : {
      DeclareAndCast(IGESDimen_BasicDimension,enfr,entfrom);
      DeclareAndCast(IGESDimen_BasicDimension,ento,entto);
      IGESDimen_ToolBasicDimension tool;
      tool.OwnCopy(enfr,ento,TC);
    }
      break;
    case  3 : {
      DeclareAndCast(IGESDimen_CenterLine,enfr,entfrom);
      DeclareAndCast(IGESDimen_CenterLine,ento,entto);
      IGESDimen_ToolCenterLine tool;
      tool.OwnCopy(enfr,ento,TC);
    }
      break;
    case  4 : {
      DeclareAndCast(IGESDimen_CurveDimension,enfr,entfrom);
      DeclareAndCast(IGESDimen_CurveDimension,ento,entto);
      IGESDimen_ToolCurveDimension tool;
      tool.OwnCopy(enfr,ento,TC);
    }
      break;
    case  5 : {
      DeclareAndCast(IGESDimen_DiameterDimension,enfr,entfrom);
      DeclareAndCast(IGESDimen_DiameterDimension,ento,entto);
      IGESDimen_ToolDiameterDimension tool;
      tool.OwnCopy(enfr,ento,TC);
    }
      break;
    case  6 : {
      DeclareAndCast(IGESDimen_DimensionDisplayData,enfr,entfrom);
      DeclareAndCast(IGESDimen_DimensionDisplayData,ento,entto);
      IGESDimen_ToolDimensionDisplayData tool;
      tool.OwnCopy(enfr,ento,TC);
    }
      break;
    case  7 : {
      DeclareAndCast(IGESDimen_DimensionTolerance,enfr,entfrom);
      DeclareAndCast(IGESDimen_DimensionTolerance,ento,entto);
      IGESDimen_ToolDimensionTolerance tool;
      tool.OwnCopy(enfr,ento,TC);
    }
      break;
    case  8 : {
      DeclareAndCast(IGESDimen_DimensionUnits,enfr,entfrom);
      DeclareAndCast(IGESDimen_DimensionUnits,ento,entto);
      IGESDimen_ToolDimensionUnits tool;
      tool.OwnCopy(enfr,ento,TC);
    }
      break;
    case  9 : {
      DeclareAndCast(IGESDimen_DimensionedGeometry,enfr,entfrom);
      DeclareAndCast(IGESDimen_DimensionedGeometry,ento,entto);
      IGESDimen_ToolDimensionedGeometry tool;
      tool.OwnCopy(enfr,ento,TC);
    }
      break;
    case 10 : {
      DeclareAndCast(IGESDimen_FlagNote,enfr,entfrom);
      DeclareAndCast(IGESDimen_FlagNote,ento,entto);
      IGESDimen_ToolFlagNote tool;
      tool.OwnCopy(enfr,ento,TC);
    }
      break;
    case 11 : {
      DeclareAndCast(IGESDimen_GeneralLabel,enfr,entfrom);
      DeclareAndCast(IGESDimen_GeneralLabel,ento,entto);
      IGESDimen_ToolGeneralLabel tool;
      tool.OwnCopy(enfr,ento,TC);
    }
      break;
    case 12 : {
      DeclareAndCast(IGESDimen_GeneralNote,enfr,entfrom);
      DeclareAndCast(IGESDimen_GeneralNote,ento,entto);
      IGESDimen_ToolGeneralNote tool;
      tool.OwnCopy(enfr,ento,TC);
    }
      break;
    case 13 : {
      DeclareAndCast(IGESDimen_GeneralSymbol,enfr,entfrom);
      DeclareAndCast(IGESDimen_GeneralSymbol,ento,entto);
      IGESDimen_ToolGeneralSymbol tool;
      tool.OwnCopy(enfr,ento,TC);
    }
      break;
    case 14 : {
      DeclareAndCast(IGESDimen_LeaderArrow,enfr,entfrom);
      DeclareAndCast(IGESDimen_LeaderArrow,ento,entto);
      IGESDimen_ToolLeaderArrow tool;
      tool.OwnCopy(enfr,ento,TC);
    }
      break;
    case 15 : {
      DeclareAndCast(IGESDimen_LinearDimension,enfr,entfrom);
      DeclareAndCast(IGESDimen_LinearDimension,ento,entto);
      IGESDimen_ToolLinearDimension tool;
      tool.OwnCopy(enfr,ento,TC);
    }
      break;
    case 16 : {
      DeclareAndCast(IGESDimen_NewDimensionedGeometry,enfr,entfrom);
      DeclareAndCast(IGESDimen_NewDimensionedGeometry,ento,entto);
      IGESDimen_ToolNewDimensionedGeometry tool;
      tool.OwnCopy(enfr,ento,TC);
    }
      break;
    case 17 : {
      DeclareAndCast(IGESDimen_NewGeneralNote,enfr,entfrom);
      DeclareAndCast(IGESDimen_NewGeneralNote,ento,entto);
      IGESDimen_ToolNewGeneralNote tool;
      tool.OwnCopy(enfr,ento,TC);
    }
      break;
    case 18 : {
      DeclareAndCast(IGESDimen_OrdinateDimension,enfr,entfrom);
      DeclareAndCast(IGESDimen_OrdinateDimension,ento,entto);
      IGESDimen_ToolOrdinateDimension tool;
      tool.OwnCopy(enfr,ento,TC);
    }
      break;
    case 19 : {
      DeclareAndCast(IGESDimen_PointDimension,enfr,entfrom);
      DeclareAndCast(IGESDimen_PointDimension,ento,entto);
      IGESDimen_ToolPointDimension tool;
      tool.OwnCopy(enfr,ento,TC);
    }
      break;
    case 20 : {
      DeclareAndCast(IGESDimen_RadiusDimension,enfr,entfrom);
      DeclareAndCast(IGESDimen_RadiusDimension,ento,entto);
      IGESDimen_ToolRadiusDimension tool;
      tool.OwnCopy(enfr,ento,TC);
    }
      break;
    case 21 : {
      DeclareAndCast(IGESDimen_Section,enfr,entfrom);
      DeclareAndCast(IGESDimen_Section,ento,entto);
      IGESDimen_ToolSection tool;
      tool.OwnCopy(enfr,ento,TC);
    }
      break;
    case 22 : {
      DeclareAndCast(IGESDimen_SectionedArea,enfr,entfrom);
      DeclareAndCast(IGESDimen_SectionedArea,ento,entto);
      IGESDimen_ToolSectionedArea tool;
      tool.OwnCopy(enfr,ento,TC);
    }
      break;
    case 23 : {
      DeclareAndCast(IGESDimen_WitnessLine,enfr,entfrom);
      DeclareAndCast(IGESDimen_WitnessLine,ento,entto);
      IGESDimen_ToolWitnessLine tool;
      tool.OwnCopy(enfr,ento,TC);
    }
      break;
    default : break;
  }
}


    Standard_Integer  IGESDimen_GeneralModule::CategoryNumber
  (const Standard_Integer /*CN*/, const Handle(Standard_Transient)& ,
   const Interface_ShareTool& ) const
{
  return Interface_Category::Number("Drawing");
}