0032041: Modeling Data - Access violation ExchangeUV in Geom_BezierSurface

[occt.git] / src / Geom / Geom_RectangularTrimmedSurface.hxx

// Created on: 1993-03-10
// Created by: JCV
// Copyright (c) 1993-1999 Matra Datavision
// Copyright (c) 1999-2014 OPEN CASCADE SAS
//
// This file is part of Open CASCADE Technology software library.
//
// This library is free software; you can redistribute it and/or modify it under
// the terms of the GNU Lesser General Public License version 2.1 as published
// by the Free Software Foundation, with special exception defined in the file
// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
// distribution for complete text of the license and disclaimer of any warranty.
//
// Alternatively, this file may be used under the terms of Open CASCADE
// commercial license or contractual agreement.

#ifndef _Geom_RectangularTrimmedSurface_HeaderFile
#define _Geom_RectangularTrimmedSurface_HeaderFile

#include <Standard.hxx>
#include <Standard_Type.hxx>

#include <Standard_Real.hxx>
#include <Standard_Boolean.hxx>
#include <Geom_BoundedSurface.hxx>
#include <GeomAbs_Shape.hxx>
#include <Standard_Integer.hxx>
class Geom_Surface;
class Standard_ConstructionError;
class Standard_RangeError;
class Standard_NoSuchObject;
class Geom_UndefinedDerivative;
class Geom_UndefinedValue;
class Geom_Curve;
class gp_Pnt;
class gp_Vec;
class gp_Trsf;
class gp_GTrsf2d;
class Geom_Geometry;


class Geom_RectangularTrimmedSurface;
DEFINE_STANDARD_HANDLE(Geom_RectangularTrimmedSurface, Geom_BoundedSurface)

//! Describes a portion of a surface (a patch) limited
//! by two values of the u parameter in the u
//! parametric direction, and two values of the v
//! parameter in the v parametric direction. The
//! domain of the trimmed surface must be within the
//! domain of the surface being trimmed.
//! The trimmed surface is defined by:
//! - the basis surface, and
//! - the values (umin, umax) and (vmin, vmax)
//! which limit it in the u and v parametric directions.
//! The trimmed surface is built from a copy of the basis
//! surface. Therefore, when the basis surface is
//! modified the trimmed surface is not changed.
//! Consequently, the trimmed surface does not
//! necessarily have the same orientation as the basis surface.
//! Warning:  The  case of surface   being trimmed is  periodic and
//! parametrics values are outside the domain is possible.
//! But, domain of the  trimmed surface can be translated
//! by (n X) the period.
class Geom_RectangularTrimmedSurface : public Geom_BoundedSurface
{

public:

  

  //! The U parametric direction of the surface is oriented from U1
  //! to U2. The V parametric direction of the surface is oriented
  //! from V1 to V2.
  //! These two directions define the orientation of the surface
  //! (normal). If the surface is not periodic USense and VSense are
  //! not used for the construction. If the surface S is periodic in
  //! one direction USense and VSense give the available part of the
  //! surface. By default in this case the surface has the same
  //! orientation as the basis surface S.
  //! The returned surface is not closed and not periodic.
  //! ConstructionError   Raised if
  //! S is not periodic in the UDirection and U1 or U2 are out of the
  //! bounds of S.
  //! S is not periodic in the VDirection and V1 or V2 are out of the
  //! bounds of S.
  //! U1 = U2 or V1 = V2
  Standard_EXPORT Geom_RectangularTrimmedSurface(const Handle(Geom_Surface)& S, const Standard_Real U1, const Standard_Real U2, const Standard_Real V1, const Standard_Real V2, const Standard_Boolean USense = Standard_True, const Standard_Boolean VSense = Standard_True);
  

  //! The basis surface S is only trim in one parametric direction.
  //! If UTrim = True the surface is trimmed in the U parametric
  //! direction else the surface is trimmed in the V parametric
  //! direction.
  //! In the considered parametric direction the resulting surface is
  //! oriented from Param1 to Param2. If S is periodic Sense gives the
  //! available part of the surface. By default the trimmed surface has
  //! the same orientation as the basis surface S in the considered
  //! parametric direction (Sense = True).
  //! If the basis surface S is closed or periodic in the parametric
  //! direction opposite to the trimming direction the trimmed surface
  //! has the same characteristics as the surface S in this direction.
  //! Warnings :
  //! In this package the entities are not shared.
  //! The RectangularTrimmedSurface is built with a copy of the
  //! surface S. So when S is modified the RectangularTrimmedSurface
  //! is not modified
  //! Raised if
  //! S is not periodic in the considered parametric direction and
  //! Param1 or Param2 are out of the bounds of S.
  //! Param1 = Param2
  Standard_EXPORT Geom_RectangularTrimmedSurface(const Handle(Geom_Surface)& S, const Standard_Real Param1, const Standard_Real Param2, const Standard_Boolean UTrim, const Standard_Boolean Sense = Standard_True);
  
  //! Modifies this patch by changing the trim values
  //! applied to the original surface
  //! The u parametric direction of
  //! this patch is oriented from U1 to U2. The v
  //! parametric direction of this patch is oriented
  //! from V1 to V2. USense and VSense are used
  //! for the construction only if the surface is periodic
  //! in the corresponding parametric direction, and
  //! define the available part of the surface; by default
  //! in this case, this patch has the same orientation
  //! as the basis surface.
  //! Raised if
  //! The BasisSurface is not periodic in the UDirection and U1 or U2
  //! are out of the bounds of the BasisSurface.
  //! The BasisSurface is not periodic in the VDirection and V1 or V2
  //! are out of the bounds of the BasisSurface.
  //! U1 = U2 or V1 = V2
  Standard_EXPORT void SetTrim (const Standard_Real U1, const Standard_Real U2, const Standard_Real V1, const Standard_Real V2, const Standard_Boolean USense = Standard_True, const Standard_Boolean VSense = Standard_True);
  
  //! Modifies this patch by changing the trim values
  //! applied to the original surface
  //! The basis surface is trimmed only in one parametric direction: if UTrim
  //! is true, the surface is trimmed in the u parametric
  //! direction; if it is false, it is trimmed in the v
  //! parametric direction. In the "trimmed" direction,
  //! this patch is oriented from Param1 to Param2. If
  //! the basis surface is periodic in the "trimmed"
  //! direction, Sense defines its available part. By
  //! default in this case, this patch has the same
  //! orientation as the basis surface in this parametric
  //! direction. If the basis surface is closed or periodic
  //! in the other parametric direction (i.e. not the
  //! "trimmed" direction), this patch has the same
  //! characteristics as the basis surface in that parametric direction.
  //! Raised if
  //! The BasisSurface is not periodic in the considered direction and
  //! Param1 or Param2 are out of the bounds of the BasisSurface.
  //! Param1 = Param2
  Standard_EXPORT void SetTrim (const Standard_Real Param1, const Standard_Real Param2, const Standard_Boolean UTrim, const Standard_Boolean Sense = Standard_True);
  
  //! Returns the Basis surface of <me>.
  Standard_EXPORT Handle(Geom_Surface) BasisSurface() const;
  
  //! Changes the orientation of this patch in the u
  //! parametric direction. The bounds of the surface are
  //! not changed, but the given parametric direction is
  //! reversed. Hence the orientation of the surface is reversed.
  Standard_EXPORT void UReverse() Standard_OVERRIDE;
  
  //! Computes the u  parameter on the modified
  //! surface, produced by when reversing its u
  //! parametric direction, for any point of u parameter U on this patch.
  Standard_EXPORT Standard_Real UReversedParameter (const Standard_Real U) const Standard_OVERRIDE;
  
  //! Changes the orientation of this patch in the v
  //! parametric direction. The bounds of the surface are
  //! not changed, but the given parametric direction is
  //! reversed. Hence the orientation of the surface is reversed.
  Standard_EXPORT void VReverse() Standard_OVERRIDE;
  
  //! Computes the v  parameter on the modified
  //! surface, produced by when reversing its v
  //! parametric direction, for any point of v parameter V on this patch.
  Standard_EXPORT Standard_Real VReversedParameter (const Standard_Real V) const Standard_OVERRIDE;
  
  //! Returns the parametric bounds U1, U2, V1 and V2 of this patch.
  Standard_EXPORT void Bounds (Standard_Real& U1, Standard_Real& U2, Standard_Real& V1, Standard_Real& V2) const Standard_OVERRIDE;
  

  //! Returns  the continuity of the surface :
  //! C0 : only geometric continuity,
  //! C1 : continuity of the first derivative all along the Surface,
  //! C2 : continuity of the second derivative all along the Surface,
  //! C3 : continuity of the third derivative all along the Surface,
  //! CN : the order of continuity is infinite.
  Standard_EXPORT GeomAbs_Shape Continuity() const Standard_OVERRIDE;
  
  //! Returns true if this patch is closed in the given parametric direction.
  Standard_EXPORT Standard_Boolean IsUClosed() const Standard_OVERRIDE;
  
  //! Returns true if this patch is closed in the given parametric direction.
  Standard_EXPORT Standard_Boolean IsVClosed() const Standard_OVERRIDE;
  

  //! Returns true if the order of derivation in the U parametric
  //! direction is N.
  //! Raised if N < 0.
  Standard_EXPORT Standard_Boolean IsCNu (const Standard_Integer N) const Standard_OVERRIDE;
  

  //! Returns true if the order of derivation in the V parametric
  //! direction is N.
  //! Raised if N < 0.
  Standard_EXPORT Standard_Boolean IsCNv (const Standard_Integer N) const Standard_OVERRIDE;
  
  //! Returns true if this patch is periodic and not trimmed in the given
  //! parametric direction.
  Standard_EXPORT Standard_Boolean IsUPeriodic() const Standard_OVERRIDE;
  
  //! Returns the period of this patch in the u
  //! parametric direction.
  //! raises if the surface is not uperiodic.
  Standard_EXPORT virtual Standard_Real UPeriod() const Standard_OVERRIDE;
  

  //! Returns true if this patch is periodic and not trimmed in the given
  //! parametric direction.
  Standard_EXPORT Standard_Boolean IsVPeriodic() const Standard_OVERRIDE;
  
  //! Returns the period of this patch in the v
  //! parametric direction.
  //! raises if the surface is not vperiodic.
  //! value and derivatives
  Standard_EXPORT virtual Standard_Real VPeriod() const Standard_OVERRIDE;
  
  //! computes the U isoparametric curve.
  Standard_EXPORT Handle(Geom_Curve) UIso (const Standard_Real U) const Standard_OVERRIDE;
  
  //! Computes the V isoparametric curve.
  Standard_EXPORT Handle(Geom_Curve) VIso (const Standard_Real V) const Standard_OVERRIDE;
  

  //! Can be raised if the basis surface is an OffsetSurface.
  Standard_EXPORT void D0 (const Standard_Real U, const Standard_Real V, gp_Pnt& P) const Standard_OVERRIDE;
  

  //! The returned derivatives have the same orientation as the
  //! derivatives of the basis surface even if the trimmed surface
  //! has not the same parametric orientation.
  //! Warning!  UndefinedDerivative  raised if the continuity of the surface is not C1.
  Standard_EXPORT void D1 (const Standard_Real U, const Standard_Real V, gp_Pnt& P, gp_Vec& D1U, gp_Vec& D1V) const Standard_OVERRIDE;
  

  //! The returned derivatives have the same orientation as the
  //! derivatives of the basis surface even if the trimmed surface
  //! has not the same parametric orientation.
  //! Warning! UndefinedDerivative raised if the continuity of the surface is not C2.
  Standard_EXPORT void D2 (const Standard_Real U, const Standard_Real V, gp_Pnt& P, gp_Vec& D1U, gp_Vec& D1V, gp_Vec& D2U, gp_Vec& D2V, gp_Vec& D2UV) const Standard_OVERRIDE;
  
  //! The returned derivatives have the same orientation as the
  //! derivatives of the basis surface even if the trimmed surface
  //! has not the same parametric orientation.
  //! Warning UndefinedDerivative raised if the continuity of the surface is not C3.
  Standard_EXPORT void D3 (const Standard_Real U, const Standard_Real V, gp_Pnt& P, gp_Vec& D1U, gp_Vec& D1V, gp_Vec& D2U, gp_Vec& D2V, gp_Vec& D2UV, gp_Vec& D3U, gp_Vec& D3V, gp_Vec& D3UUV, gp_Vec& D3UVV) const Standard_OVERRIDE;
  
  //! The returned derivative has the same orientation as the
  //! derivative of the basis surface even if the trimmed surface
  //! has not the same parametric orientation.
  //! Warning!  UndefinedDerivative raised if the continuity of the surface is not CNu in the U
  //! parametric direction and CNv in the V parametric direction.
  //! RangeError Raised if Nu + Nv < 1 or Nu < 0 or Nv < 0.
  Standard_EXPORT gp_Vec DN (const Standard_Real U, const Standard_Real V, const Standard_Integer Nu, const Standard_Integer Nv) const Standard_OVERRIDE;
  
  //! Applies the transformation T to this patch.
  //! Warning
  //! As a consequence, the basis surface included in the
  //! data structure of this patch is also modified.
  Standard_EXPORT void Transform (const gp_Trsf& T) Standard_OVERRIDE;
  
  //! Computes the  parameters on the  transformed  surface for
  //! the transform of the point of parameters U,V on <me>.
  //!
  //! me->Transformed(T)->Value(U',V')
  //!
  //! is the same point as
  //!
  //! me->Value(U,V).Transformed(T)
  //!
  //! Where U',V' are the new values of U,V after calling
  //!
  //! me->TranformParameters(U,V,T)
  //!
  //! This methods calls the basis surface method.
  Standard_EXPORT virtual void TransformParameters (Standard_Real& U, Standard_Real& V, const gp_Trsf& T) const Standard_OVERRIDE;
  
  //! Returns a 2d transformation  used to find the  new
  //! parameters of a point on the transformed surface.
  //!
  //! me->Transformed(T)->Value(U',V')
  //!
  //! is the same point as
  //!
  //! me->Value(U,V).Transformed(T)
  //!
  //! Where U',V' are  obtained by transforming U,V with
  //! th 2d transformation returned by
  //!
  //! me->ParametricTransformation(T)
  //!
  //! This methods calls the basis surface method.
  Standard_EXPORT virtual gp_GTrsf2d ParametricTransformation (const gp_Trsf& T) const Standard_OVERRIDE;
  
  //! Creates a new object which is a copy of this patch.
  Standard_EXPORT Handle(Geom_Geometry) Copy() const Standard_OVERRIDE;

  //! Dumps the content of me into the stream
  Standard_EXPORT virtual void DumpJson (Standard_OStream& theOStream, Standard_Integer theDepth = -1) const Standard_OVERRIDE;




  DEFINE_STANDARD_RTTIEXT(Geom_RectangularTrimmedSurface,Geom_BoundedSurface)

protected:




private:

  
  //! General set trim,  to implement constructors and
  //! others set trim.
  Standard_EXPORT void SetTrim (const Standard_Real U1, const Standard_Real U2, const Standard_Real V1, const Standard_Real V2, const Standard_Boolean UTrim, const Standard_Boolean VTrim, const Standard_Boolean USense, const Standard_Boolean VSense);

  Handle(Geom_Surface) basisSurf;
  Standard_Real utrim1;
  Standard_Real vtrim1;
  Standard_Real utrim2;
  Standard_Real vtrim2;
  Standard_Boolean isutrimmed;
  Standard_Boolean isvtrimmed;


};







#endif // _Geom_RectangularTrimmedSurface_HeaderFile