Commit | Line | Data |
---|---|---|
b311480e | 1 | // Created on: 1993-07-22 |
2 | // Created by: Remi LEQUETTE | |
3 | // Copyright (c) 1993-1999 Matra Datavision | |
973c2be1 | 4 | // Copyright (c) 1999-2014 OPEN CASCADE SAS |
b311480e | 5 | // |
973c2be1 | 6 | // This file is part of Open CASCADE Technology software library. |
b311480e | 7 | // |
d5f74e42 | 8 | // This library is free software; you can redistribute it and/or modify it under |
9 | // the terms of the GNU Lesser General Public License version 2.1 as published | |
973c2be1 | 10 | // by the Free Software Foundation, with special exception defined in the file |
11 | // OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT | |
12 | // distribution for complete text of the license and disclaimer of any warranty. | |
b311480e | 13 | // |
973c2be1 | 14 | // Alternatively, this file may be used under the terms of Open CASCADE |
15 | // commercial license or contractual agreement. | |
7fd59977 | 16 | |
17 | #include <BRepTest.hxx> | |
18 | #include <GeometryTest.hxx> | |
19 | #include <gp_Pnt2d.hxx> | |
20 | #include <gp_Pln.hxx> | |
21 | #include <gp_Ax2.hxx> | |
22 | #include <gp_Vec.hxx> | |
23 | #include <gp_Vec2d.hxx> | |
24 | #include <TColgp_HArray1OfPnt2d.hxx> | |
25 | #include <TColgp_Array1OfPnt2d.hxx> | |
26 | #include <BRepBuilderAPI.hxx> | |
27 | #include <BRepBuilderAPI_MakeVertex.hxx> | |
28 | #include <BRepBuilderAPI_MakeEdge.hxx> | |
29 | #include <BRepBuilderAPI_MakeEdge2d.hxx> | |
30 | #include <BRepBuilderAPI_MakeFace.hxx> | |
31 | #include <BRepBuilderAPI_MakeWire.hxx> | |
32 | #include <BRepBuilderAPI_MakePolygon.hxx> | |
33 | #include <BRepOffsetAPI_MakeOffset.hxx> | |
34 | #include <BRepLib.hxx> | |
35 | #include <BRepAlgo.hxx> | |
36 | #include <BRepAdaptor_Curve.hxx> | |
37 | #include <BRep_Builder.hxx> | |
38 | #include <BRep_Tool.hxx> | |
39 | #include <BRepTools.hxx> | |
40 | #include <Geom_Curve.hxx> | |
41 | #include <Geom_TrimmedCurve.hxx> | |
42 | #include <Geom2d_BSplineCurve.hxx> | |
43 | #include <Geom_Surface.hxx> | |
44 | #include <Geom_RectangularTrimmedSurface.hxx> | |
45 | #include <Geom_Plane.hxx> | |
46 | #include <Geom2d_Line.hxx> | |
47 | #include <Geom2d_Circle.hxx> | |
48 | #include <Geom2dAPI_Interpolate.hxx> | |
49 | #include <Geom2d_TrimmedCurve.hxx> | |
50 | #include <TopoDS.hxx> | |
51 | #include <TopoDS_Shape.hxx> | |
52 | #include <TopoDS_Wire.hxx> | |
53 | ||
54 | #include <DBRep.hxx> | |
55 | #include <DBRep_DrawableShape.hxx> | |
56 | #include <Draw_Interpretor.hxx> | |
57 | #include <Draw_Appli.hxx> | |
58 | #include <DrawTrSurf.hxx> | |
59 | #include <DrawTrSurf_BSplineCurve2d.hxx> | |
c858bb10 | 60 | #include <DrawTrSurf_Point.hxx> |
7fd59977 | 61 | |
62 | #include <gp.hxx> | |
63 | #include <Precision.hxx> | |
64 | #include <GeomAPI.hxx> | |
65 | #include <TopAbs_Orientation.hxx> | |
66 | #include <TopExp_Explorer.hxx> | |
67 | #include <TopOpeBRep_EdgesIntersector.hxx> | |
68 | #include <TopOpeBRep_Point2d.hxx> | |
69 | #include <TopOpeBRepDS_Transition.hxx> | |
70 | ||
7fd59977 | 71 | #include <stdio.h> |
72 | #ifdef WNT | |
73 | Standard_IMPORT Draw_Viewer dout; | |
74 | #endif | |
75 | ||
76 | //======================================================================= | |
77 | // vertex | |
78 | //======================================================================= | |
79 | ||
80 | static Standard_Integer vertex(Draw_Interpretor& , Standard_Integer n, const char** a) | |
81 | { | |
c858bb10 | 82 | if (n < 3) return 1; |
7fd59977 | 83 | if (n >= 5) { |
84 | DBRep::Set(a[1], | |
73cd8a8a | 85 | BRepBuilderAPI_MakeVertex(gp_Pnt(Draw::Atof(a[2]),Draw::Atof(a[3]),Draw::Atof(a[4])))); |
86 | } | |
c858bb10 | 87 | else if (n == 4) |
88 | { | |
7fd59977 | 89 | TopoDS_Shape S = DBRep::Get(a[3]); |
90 | if (S.IsNull()) return 0; | |
91 | if (S.ShapeType() != TopAbs_EDGE) return 0; | |
92 | BRepAdaptor_Curve C(TopoDS::Edge(S)); | |
93 | gp_Pnt P; | |
91322f44 | 94 | C.D0(Draw::Atof(a[2]),P); |
7fd59977 | 95 | DBRep::Set(a[1], BRepBuilderAPI_MakeVertex(P)); |
96 | } | |
c858bb10 | 97 | else |
98 | { | |
99 | Handle(DrawTrSurf_Point) aP = | |
100 | Handle(DrawTrSurf_Point)::DownCast(Draw::Get(a[2])); | |
101 | DBRep::Set(a[1], BRepBuilderAPI_MakeVertex(aP->Point())); | |
102 | } | |
7fd59977 | 103 | return 0; |
104 | } | |
105 | ||
106 | //======================================================================= | |
107 | // range | |
108 | //======================================================================= | |
109 | ||
110 | static Standard_Integer range(Draw_Interpretor& , Standard_Integer n, const char** a) | |
111 | { | |
112 | if (n < 4) return 1; | |
113 | TopoDS_Shape aLocalShape(DBRep::Get(a[1],TopAbs_EDGE)); | |
114 | TopoDS_Edge E = TopoDS::Edge(aLocalShape); | |
115 | // TopoDS_Edge E = TopoDS::Edge(DBRep::Get(a[1],TopAbs_EDGE)); | |
116 | if (E.IsNull()) return 1; | |
91322f44 | 117 | Standard_Real f = Draw::Atof(a[n-2]); |
118 | Standard_Real l = Draw::Atof(a[n-1]); | |
7fd59977 | 119 | BRep_Builder B; |
120 | if (n == 4) | |
121 | B.Range(E,f,l); | |
122 | else { | |
123 | aLocalShape = DBRep::Get(a[2],TopAbs_FACE); | |
124 | TopoDS_Face F = TopoDS::Face(aLocalShape); | |
125 | // TopoDS_Face F = TopoDS::Face(DBRep::Get(a[2],TopAbs_FACE)); | |
126 | if (F.IsNull()) return 1; | |
127 | B.Range(E,F,f,l); | |
128 | } | |
129 | return 0; | |
130 | } | |
131 | ||
132 | //======================================================================= | |
133 | // trim | |
134 | //======================================================================= | |
135 | ||
136 | static Standard_Integer trim(Draw_Interpretor& di, Standard_Integer n, const char** a) | |
137 | { | |
138 | if (n < 3) return 1; | |
139 | TopoDS_Shape e = DBRep::Get(a[1]); | |
140 | if (e.IsNull()) return 1; | |
141 | if (e.ShapeType() != TopAbs_EDGE) return 1; | |
142 | TopoDS_Shape v1 = DBRep::Get(a[2]); | |
143 | if (v1.IsNull()) return 1; | |
144 | if (v1.ShapeType() != TopAbs_VERTEX) return 1; | |
145 | TopoDS_Shape v2; | |
146 | if (n > 3) { | |
147 | v2 = DBRep::Get(a[3]); | |
148 | if (v2.IsNull()) return 1; | |
149 | if (v2.ShapeType() != TopAbs_VERTEX) return 1; | |
150 | } | |
151 | TopLoc_Location L; | |
152 | Standard_Real f,l; | |
153 | const Handle(Geom_Curve) C = BRep_Tool::Curve(TopoDS::Edge(e),L,f,l); | |
154 | TopLoc_Location LI = L.Inverted(); | |
155 | e.Orientation(TopAbs_FORWARD); | |
156 | e.Move(LI); | |
157 | v1.Move(LI); | |
158 | v2.Move(LI); | |
159 | TopoDS_Edge ne; | |
160 | if (v2.IsNull()) { | |
161 | if (v1.Orientation() == TopAbs_REVERSED) { | |
162 | v2 = v1; | |
163 | v1 = TopoDS_Shape(); | |
164 | } | |
165 | } | |
166 | BRepBuilderAPI_MakeEdge ME(C,TopoDS::Vertex(v1),TopoDS::Vertex(v2)); | |
167 | if (ME.IsDone()) { | |
168 | ne = ME; | |
169 | ne.Move(L); | |
170 | DBRep::Set(a[1],ne); | |
171 | } | |
172 | else { | |
173 | //cout <<"Error creating edge"<<endl; | |
174 | di <<"Error creating edge"<<"\n"; | |
175 | } | |
176 | return 0; | |
177 | } | |
178 | ||
179 | ||
180 | //======================================================================= | |
181 | // polyline | |
182 | //======================================================================= | |
183 | ||
184 | static Standard_Integer polyline(Draw_Interpretor& , Standard_Integer n, const char** a) | |
185 | { | |
186 | if (n < 8) return 1; | |
187 | if (((n-2) % 3) != 0) return 1; | |
188 | Standard_Integer i, j, np = (n-2) / 3; | |
189 | BRepBuilderAPI_MakePolygon W; | |
190 | j = 2; | |
191 | for (i = 1; i <= np; i ++) { | |
91322f44 | 192 | W.Add(gp_Pnt(Draw::Atof(a[j]),Draw::Atof(a[j+1]),Draw::Atof(a[j+2]))); |
7fd59977 | 193 | j += 3; |
194 | } | |
195 | DBRep::Set(a[1],W.Wire()); | |
196 | return 0; | |
197 | } | |
198 | ||
199 | //======================================================================= | |
200 | // polyvertex | |
201 | //======================================================================= | |
202 | ||
203 | static Standard_Integer polyvertex(Draw_Interpretor& , Standard_Integer n, const char** a) | |
204 | { | |
205 | if (n < 4) return 1; | |
206 | Standard_Integer i; | |
207 | BRepBuilderAPI_MakePolygon W; | |
208 | for (i = 2; i < n; i ++) { | |
209 | TopoDS_Shape S = DBRep::Get(a[i]); | |
210 | if (S.IsNull()) return 1; | |
211 | if (S.ShapeType() != TopAbs_VERTEX) return 1; | |
212 | W.Add(TopoDS::Vertex(S)); | |
213 | } | |
214 | DBRep::Set(a[1],W.Wire()); | |
215 | return 0; | |
216 | } | |
217 | ||
218 | //======================================================================= | |
219 | // wire | |
220 | //======================================================================= | |
221 | ||
222 | static Standard_Integer wire(Draw_Interpretor& di, Standard_Integer n, const char** a) | |
223 | { | |
224 | if (n < 3) return 1; | |
225 | Standard_Integer i; | |
226 | BRepBuilderAPI_MakeWire MW; | |
227 | for (i = 2; i < n; i ++) { | |
228 | TopoDS_Shape S = DBRep::Get(a[i]); | |
229 | if (S.IsNull()) continue; | |
230 | if (S.ShapeType() == TopAbs_EDGE) | |
231 | MW.Add(TopoDS::Edge(S)); | |
232 | else if (S.ShapeType() == TopAbs_WIRE) | |
233 | MW.Add(TopoDS::Wire(S)); | |
234 | else | |
235 | continue; | |
236 | } | |
237 | if (!MW.IsDone()) { | |
238 | //cout << "Wire not done" << endl; | |
239 | di << "Wire not done" << "\n"; | |
240 | return 0; | |
241 | } | |
242 | DBRep::Set(a[1],MW); | |
243 | return 0; | |
244 | } | |
245 | ||
246 | //======================================================================= | |
247 | // mkedge | |
248 | //======================================================================= | |
249 | ||
250 | static Standard_Integer mkedge(Draw_Interpretor& di, Standard_Integer n, const char** a) | |
251 | { | |
252 | if (n < 3) return 1; | |
73cd8a8a | 253 | |
7fd59977 | 254 | Handle(Geom_Curve) C = DrawTrSurf::GetCurve(a[2]); |
255 | Handle(Geom2d_Curve) C2d = DrawTrSurf::GetCurve2d(a[2]); | |
256 | if (C.IsNull() && C2d.IsNull()) { | |
257 | //cout << a[2] << " is not a curve" << endl; | |
258 | di << a[2] << " is not a curve" << "\n"; | |
259 | return 1; | |
260 | } | |
73cd8a8a | 261 | |
7fd59977 | 262 | TopoDS_Edge edge; |
263 | ||
264 | if (n == 3) { | |
265 | if (!C.IsNull()) edge = BRepBuilderAPI_MakeEdge(C); | |
266 | else edge = BRepBuilderAPI_MakeEdge2d(C2d); | |
267 | } | |
268 | else { | |
269 | Handle(Geom_Surface) S; | |
270 | Standard_Integer i = 0; | |
271 | if (!C2d.IsNull()) { | |
272 | S = DrawTrSurf::GetSurface(a[3]); | |
273 | if (!S.IsNull()) i = 1; | |
274 | } | |
275 | TopoDS_Shape aLocalShape(DBRep::Get(a[3+i],TopAbs_VERTEX)); | |
276 | TopoDS_Vertex V1 = TopoDS::Vertex(aLocalShape); | |
277 | // TopoDS_Vertex V1 = TopoDS::Vertex(DBRep::Get(a[3+i],TopAbs_VERTEX)); | |
278 | if (n == 5+i) { | |
279 | if (V1.IsNull()) { | |
73cd8a8a | 280 | if (!C.IsNull()) |
281 | edge = BRepBuilderAPI_MakeEdge(C,Draw::Atof(a[3]),Draw::Atof(a[4])); | |
282 | else if (S.IsNull()) | |
283 | edge = BRepBuilderAPI_MakeEdge2d(C2d,Draw::Atof(a[3]),Draw::Atof(a[4])); | |
284 | else | |
285 | edge = BRepBuilderAPI_MakeEdge(C2d,S,Draw::Atof(a[4]),Draw::Atof(a[5])); | |
7fd59977 | 286 | } |
287 | else { | |
73cd8a8a | 288 | aLocalShape = DBRep::Get(a[4+i],TopAbs_VERTEX); |
289 | TopoDS_Vertex V2 = TopoDS::Vertex(aLocalShape); | |
290 | // TopoDS_Vertex V2 = TopoDS::Vertex(DBRep::Get(a[4+i],TopAbs_VERTEX)); | |
291 | if (!C.IsNull()) | |
292 | edge = BRepBuilderAPI_MakeEdge(C,V1,V2); | |
293 | else if (S.IsNull()) | |
294 | edge = BRepBuilderAPI_MakeEdge2d(C2d,V1,V2); | |
295 | else | |
296 | edge = BRepBuilderAPI_MakeEdge(C2d,S,V1,V2); | |
7fd59977 | 297 | } |
298 | } | |
299 | else if (n == 7+i) { | |
300 | aLocalShape = DBRep::Get(a[5+i],TopAbs_VERTEX); | |
301 | TopoDS_Vertex V2 = TopoDS::Vertex(aLocalShape); | |
302 | // TopoDS_Vertex V2 = TopoDS::Vertex(DBRep::Get(a[5+i],TopAbs_VERTEX)); | |
303 | if (!C.IsNull()) | |
73cd8a8a | 304 | edge = BRepBuilderAPI_MakeEdge(C,V1,V2,Draw::Atof(a[4]),Draw::Atof(a[6])); |
7fd59977 | 305 | else if (S.IsNull()) |
73cd8a8a | 306 | edge = BRepBuilderAPI_MakeEdge2d(C2d,V1,V2,Draw::Atof(a[4]),Draw::Atof(a[6])); |
7fd59977 | 307 | else |
73cd8a8a | 308 | edge = BRepBuilderAPI_MakeEdge(C2d,S,V1,V2,Draw::Atof(a[5]),Draw::Atof(a[7])); |
7fd59977 | 309 | } |
310 | else | |
311 | return 1; | |
312 | } | |
313 | ||
314 | DBRep::Set(a[1],edge); | |
315 | return 0; | |
316 | } | |
317 | ||
318 | //======================================================================= | |
319 | // mkcurve | |
320 | //======================================================================= | |
321 | Standard_IMPORT Draw_Color DrawTrSurf_CurveColor(const Draw_Color col); | |
322 | Standard_IMPORT void DBRep_WriteColorOrientation (); | |
323 | Standard_IMPORT Draw_Color DBRep_ColorOrientation (const TopAbs_Orientation Or); | |
324 | ||
325 | static Standard_Integer mkcurve(Draw_Interpretor& di, Standard_Integer n, const char** a) | |
326 | { | |
327 | if (n < 3) return 1; | |
328 | ||
329 | Standard_Boolean DispOrientation = !strcmp(a[0],"mkoricurve"); | |
330 | ||
331 | TopoDS_Shape S = DBRep::Get(a[2],TopAbs_EDGE); | |
332 | if (S.IsNull()) return 1; | |
333 | TopLoc_Location L; | |
334 | Standard_Real f,l; | |
335 | ||
336 | Handle(Geom_Curve) C = BRep_Tool::Curve(TopoDS::Edge(S),L,f,l); | |
337 | if (C.IsNull()) { | |
338 | //cout << a[2] << " has no 3d curve" << endl; | |
339 | di << a[2] << " has no 3d curve" << "\n"; | |
340 | return 1; | |
341 | } | |
342 | C = new Geom_TrimmedCurve(C,f,l); | |
73cd8a8a | 343 | |
7fd59977 | 344 | Draw_Color col,savecol; |
73cd8a8a | 345 | |
7fd59977 | 346 | if ( DispOrientation) { |
347 | DBRep_WriteColorOrientation (); | |
348 | col = DBRep_ColorOrientation(TopoDS::Edge(S).Orientation()); | |
349 | savecol = DrawTrSurf_CurveColor(col); | |
350 | } | |
351 | DrawTrSurf::Set(a[1],C->Transformed(L.Transformation())); | |
352 | if ( DispOrientation) { | |
353 | DrawTrSurf_CurveColor(savecol); | |
354 | } | |
355 | ||
356 | return 0; | |
357 | } | |
358 | ||
359 | //======================================================================= | |
360 | //function : mkpoint | |
361 | //purpose : | |
362 | //======================================================================= | |
363 | ||
364 | static Standard_Integer mkpoint(Draw_Interpretor& , | |
73cd8a8a | 365 | Standard_Integer n, const char** a) |
7fd59977 | 366 | { |
367 | if (n < 3) return 1; | |
368 | ||
369 | TopoDS_Shape S = DBRep::Get(a[2],TopAbs_VERTEX); | |
370 | if ( S.IsNull()) return 1; | |
371 | ||
372 | TopoDS_Vertex V = TopoDS::Vertex(S); | |
73cd8a8a | 373 | |
7fd59977 | 374 | gp_Pnt P = BRep_Tool::Pnt(V); |
375 | DrawTrSurf::Set(a[1],P); | |
376 | ||
377 | return 0; | |
378 | } | |
379 | ||
380 | //======================================================================= | |
381 | // mk2dcurve | |
382 | //======================================================================= | |
383 | ||
384 | static Standard_Integer mk2dcurve(Draw_Interpretor& di, | |
73cd8a8a | 385 | Standard_Integer na, const char** a) |
7fd59977 | 386 | { |
387 | if (na < 3) return 1; | |
388 | ||
389 | TopoDS_Shape S; | |
a86d3ec0 | 390 | S = DBRep::Get(a[2],TopAbs_EDGE); |
391 | if (S.IsNull()) | |
392 | return 1; | |
393 | ||
7fd59977 | 394 | TopoDS_Edge E = TopoDS::Edge(S); |
395 | ||
396 | TopLoc_Location L; | |
1d47d8d0 | 397 | Standard_Real f = 0., l = 0.; |
7fd59977 | 398 | Handle(Geom2d_Curve) C; |
399 | Handle(Geom_Surface) Surf; | |
73cd8a8a | 400 | |
a86d3ec0 | 401 | Standard_Boolean hasFace = Standard_False; |
402 | ||
7fd59977 | 403 | if ( na == 3 ) { |
404 | // get the first PCurve connected to edge E | |
405 | BRep_Tool::CurveOnSurface(E,C,Surf,L,f,l); | |
406 | } | |
a86d3ec0 | 407 | else if ( na == 4 ) |
408 | { | |
409 | S = DBRep::Get(a[3],TopAbs_FACE); | |
410 | if (S.IsNull()) | |
411 | { | |
412 | Standard_Integer ind = Draw::Atoi(a[3]); | |
413 | BRep_Tool::CurveOnSurface(E,C,Surf,L,f,l,ind); | |
414 | } | |
415 | else | |
416 | { | |
417 | hasFace = Standard_True; | |
418 | TopoDS_Face F = TopoDS::Face(S); | |
419 | C = BRep_Tool::CurveOnSurface(E,F,f,l); | |
420 | } | |
7fd59977 | 421 | } |
422 | ||
423 | if (C.IsNull()) { | |
424 | //cout << a[2] << " has no 2d curve"; if (na == 4) cout << " on " << a[3]; | |
425 | //cout << endl; | |
a86d3ec0 | 426 | di << a[2] << " has no 2d curve"; |
427 | ||
428 | if (hasFace) | |
429 | { | |
430 | di << " on " << a[3]; | |
431 | } | |
432 | ||
7fd59977 | 433 | di << "\n"; |
434 | return 1; | |
435 | } | |
436 | C = new Geom2d_TrimmedCurve(C,f,l); | |
437 | DrawTrSurf::Set(a[1],C); | |
438 | ||
439 | return 0; | |
440 | } | |
441 | ||
442 | //======================================================================= | |
443 | // edge | |
444 | //======================================================================= | |
445 | ||
446 | static Standard_Integer edge(Draw_Interpretor& , Standard_Integer n, const char** a) | |
447 | { | |
448 | if (n < 4) return 1; | |
449 | TopoDS_Shape V1 = DBRep::Get(a[2],TopAbs_VERTEX); | |
450 | TopoDS_Shape V2 = DBRep::Get(a[3],TopAbs_VERTEX); | |
451 | if (V1.IsNull() || V2.IsNull()) return 1; | |
452 | TopoDS_Edge E = BRepBuilderAPI_MakeEdge(TopoDS::Vertex(V1), | |
73cd8a8a | 453 | TopoDS::Vertex(V2)); |
7fd59977 | 454 | DBRep::Set(a[1],E); |
455 | return 0; | |
456 | } | |
457 | ||
458 | //======================================================================= | |
459 | // isoedge | |
460 | //======================================================================= | |
461 | ||
462 | static Standard_Integer isoedge(Draw_Interpretor& , Standard_Integer n, const char** a) | |
463 | { | |
464 | if (n < 6) return 1; | |
465 | ||
466 | Standard_Boolean uiso = *a[0] == 'u'; | |
91322f44 | 467 | Standard_Real p = Draw::Atof(a[3]); |
468 | Standard_Real p1 = Draw::Atof(a[4]); | |
469 | Standard_Real p2 = Draw::Atof(a[5]); | |
7fd59977 | 470 | TopoDS_Shape Sh = DBRep::Get(a[2],TopAbs_FACE); |
471 | if (Sh.IsNull()) return 1; | |
472 | TopLoc_Location Loc; | |
473 | const Handle(Geom_Surface)& S = BRep_Tool::Surface(TopoDS::Face(Sh),Loc); | |
474 | Standard_Real UMin,UMax,VMin,VMax; | |
475 | BRepTools::UVBounds(TopoDS::Face(Sh),UMin,UMax,VMin,VMax); | |
476 | if (uiso) { | |
73cd8a8a | 477 | VMin = Min (VMin , Min (p1,p2)); |
478 | VMax = Max (VMax , Max (p1,p2)); | |
479 | } | |
7fd59977 | 480 | else{ |
73cd8a8a | 481 | UMin = Min (UMin , Min (p1,p2)); |
482 | UMax = Max (VMax , Max (p1,p2)); | |
483 | } | |
484 | ||
7fd59977 | 485 | Handle(Geom_RectangularTrimmedSurface) TS = new Geom_RectangularTrimmedSurface(S,UMin,UMax,VMin,VMax); |
486 | Handle(Geom_Curve) C; | |
487 | Handle(Geom2d_Line) L; | |
488 | if (uiso) { | |
489 | C = TS->UIso(p); | |
490 | L = new Geom2d_Line(gp_Pnt2d(p,0),gp_Dir2d(0,1)); | |
491 | } | |
492 | else { | |
493 | C = TS->VIso(p); | |
494 | L = new Geom2d_Line(gp_Pnt2d(0,p),gp_Dir2d(1,0)); | |
495 | } | |
496 | ||
497 | TopoDS_Edge E = BRepBuilderAPI_MakeEdge(C,p1,p2); | |
498 | E.Location(Loc); | |
499 | BRep_Builder B; | |
500 | B.UpdateEdge(E,L,TopoDS::Face(Sh),0.); | |
501 | ||
502 | DBRep::Set(a[1],E); | |
503 | return 0; | |
504 | } | |
505 | ||
506 | //======================================================================= | |
507 | // transfert | |
508 | //======================================================================= | |
509 | ||
510 | static Standard_Integer transfert(Draw_Interpretor& , Standard_Integer n, const char** a) | |
511 | { | |
512 | if (n < 3) return 1; | |
513 | ||
514 | TopoDS_Shape E1 = DBRep::Get(a[1],TopAbs_EDGE); | |
515 | TopoDS_Shape E2 = DBRep::Get(a[2],TopAbs_EDGE); | |
516 | if (E1.IsNull() || E2.IsNull()) return 1; | |
73cd8a8a | 517 | |
7fd59977 | 518 | BRep_Builder B; |
519 | B.Transfert(TopoDS::Edge(E1),TopoDS::Edge(E2)); | |
520 | return 0; | |
521 | } | |
522 | ||
523 | //======================================================================= | |
524 | // profile | |
525 | // command to build a profile | |
526 | //======================================================================= | |
527 | ||
528 | static Standard_Integer profile(Draw_Interpretor& di, | |
73cd8a8a | 529 | Standard_Integer n, |
530 | const char** a) | |
7fd59977 | 531 | { |
532 | // this command build a profile | |
533 | // from a moving point | |
534 | ||
535 | if (n == 1) { | |
536 | // print help | |
537 | ||
538 | //cout << "profile name [code values] [code values] ...\n"; | |
539 | //cout << " Build a profile in the XY plane from a moving point and direction\n"; | |
540 | //cout << " The original point and direction are 0 0 and 1 0\n"; | |
541 | //cout << " Codes and values describe the point or direction change\n"; | |
542 | //cout << " When the point change the direction becomes the tangent\n"; | |
543 | //cout << " All angles are in degree (may be negative)\n"; | |
544 | //cout << " By default the profile is closed and a face is built\n"; | |
545 | //cout << "\n"; | |
546 | //cout << " Instruction Parameters Action\n"; | |
547 | //cout << " O X Y Z Set the origin of the plane\n"; | |
548 | //cout << " P DX DY DZ UX UY UZ Set the normal and X of the plane\n"; | |
549 | //cout << " S Face Set the Plane (Face must be a Face)\n"; | |
550 | //cout << " F X Y Set the first point\n"; | |
551 | //cout << " X DX Translate point along X\n"; | |
552 | //cout << " Y DY Translate point along Y\n"; | |
553 | //cout << " L DL Translate point along direction\n"; | |
554 | //cout << " XX X Set point X coordinate\n"; | |
555 | //cout << " YY Y Set point Y coordinate\n"; | |
556 | //cout << " T DX DY Translate point\n"; | |
557 | //cout << " TT X Y Set point\n"; | |
558 | //cout << " R Angle Rotate direction\n"; | |
559 | //cout << " RR Angle Set direction\n"; | |
560 | //cout << " D DX DY Set direction\n"; | |
561 | //cout << " IX X Intersect with vertical\n"; | |
562 | //cout << " IY Y Intersect with horizontal\n"; | |
563 | //cout << " C Radius Angle Arc of circle tangent to direction\n"; | |
564 | //cout << " W Make a closed wire\n"; | |
565 | //cout << " WW Make an open wire\n"; | |
566 | //cout << endl; | |
567 | di << "profile name [code values] [code values] ...\n"; | |
568 | di << " Build a profile in the XY plane from a moving point and direction\n"; | |
569 | di << " The original point and direction are 0 0 and 1 0\n"; | |
570 | di << " Codes and values describe the point or direction change\n"; | |
571 | di << " When the point change the direction becomes the tangent\n"; | |
572 | di << " All angles are in degree (may be negative)\n"; | |
573 | di << " By default the profile is closed and a face is built\n"; | |
574 | di << "\n"; | |
575 | di << " Instruction Parameters Action\n"; | |
576 | di << " O X Y Z Set the origin of the plane\n"; | |
577 | di << " P DX DY DZ UX UY UZ Set the normal and X of the plane\n"; | |
578 | di << " S Face Set the Plane (Face must be a Face)\n"; | |
579 | di << " F X Y Set the first point\n"; | |
580 | di << " X DX Translate point along X\n"; | |
581 | di << " Y DY Translate point along Y\n"; | |
582 | di << " L DL Translate point along direction\n"; | |
583 | di << " XX X Set point X coordinate\n"; | |
584 | di << " YY Y Set point Y coordinate\n"; | |
585 | di << " T DX DY Translate point\n"; | |
586 | di << " TT X Y Set point\n"; | |
587 | di << " R Angle Rotate direction\n"; | |
588 | di << " RR Angle Set direction\n"; | |
589 | di << " D DX DY Set direction\n"; | |
590 | di << " IX X Intersect with vertical\n"; | |
591 | di << " IY Y Intersect with horizontal\n"; | |
592 | di << " C Radius Angle Arc of circle tangent to direction\n"; | |
593 | di << " W Make a closed wire\n"; | |
594 | di << " WW Make an open wire\n"; | |
595 | di << "\n"; | |
596 | return 0; | |
597 | } | |
598 | ||
599 | Standard_Integer i = 2; | |
600 | Standard_Real x0 = 0, y0 = 0, x = 0, y = 0, dx = 1, dy = 0; | |
601 | BRepBuilderAPI_MakeWire MW; | |
602 | gp_Ax3 DummyHP(gp::XOY()); | |
603 | gp_Pln P(DummyHP); | |
604 | enum {line , circle, none} move; | |
605 | Standard_Boolean face = Standard_True; | |
606 | Standard_Boolean close = Standard_True; | |
607 | Standard_Boolean first = Standard_True; | |
608 | Standard_Boolean stayfirst = Standard_False; | |
609 | Standard_Boolean isplanar = Standard_True; | |
610 | TopoDS_Shape S; | |
611 | TopLoc_Location TheLocation; | |
612 | Handle(Geom_Surface) Surface; | |
613 | while (i < n) { | |
614 | ||
615 | Standard_Real length=0,radius=0,angle=0; | |
616 | move = none; | |
617 | ||
618 | switch (a[i][0]) { | |
619 | ||
620 | case 'F': | |
621 | case 'f': | |
622 | i += 2; | |
623 | if (i >= n) goto badargs; | |
624 | if (!first) { | |
73cd8a8a | 625 | di << "profile: The F instruction must precede all moves"; |
626 | return 1; | |
7fd59977 | 627 | } |
91322f44 | 628 | x0 = x = Draw::Atof(a[i-1]); |
629 | y0 = y = Draw::Atof(a[i]); | |
7fd59977 | 630 | stayfirst = Standard_True; |
631 | break; | |
632 | ||
633 | case 'O': | |
634 | case 'o': | |
635 | i += 3; | |
636 | if (i >= n) goto badargs; | |
91322f44 | 637 | P.SetLocation(gp_Pnt(Draw::Atof(a[i-2]),Draw::Atof(a[i-1]),Draw::Atof(a[i]))); |
7fd59977 | 638 | stayfirst = Standard_True; |
639 | break; | |
640 | ||
641 | case 'P': | |
642 | case 'p': | |
643 | i += 6; | |
644 | if (i >= n) goto badargs; | |
645 | { | |
73cd8a8a | 646 | gp_Vec vn(Draw::Atof(a[i-5]),Draw::Atof(a[i-4]),Draw::Atof(a[i-3])); |
647 | gp_Vec vx(Draw::Atof(a[i-2]),Draw::Atof(a[i-1]),Draw::Atof(a[i])); | |
648 | if (vn.Magnitude() <= Precision::Confusion()) { | |
649 | di << "profile : null direction"; | |
650 | return 1; | |
651 | } | |
652 | if (vx.Magnitude() <= Precision::Confusion()) { | |
653 | di << "profile : null direction"; | |
654 | return 1; | |
655 | } | |
656 | gp_Ax2 ax(P.Location(),vn,vx); | |
657 | P.SetPosition(ax); | |
7fd59977 | 658 | } |
659 | stayfirst = Standard_True; | |
660 | break; | |
661 | ||
662 | case 'S': | |
663 | case 's': | |
664 | i += 1; | |
665 | if (i >= n) goto badargs; | |
666 | { | |
73cd8a8a | 667 | TopoDS_Shape aLocalShape(DBRep::Get(a[i],TopAbs_FACE)); |
668 | TopoDS_Face Face = TopoDS::Face(aLocalShape); | |
669 | // TopoDS_Face Face = TopoDS::Face(DBRep::Get(a[i],TopAbs_FACE)); | |
670 | if (Face.IsNull()) { | |
671 | di << "profile : no face found"; | |
672 | return 1; | |
673 | } | |
674 | Surface = BRep_Tool::Surface(Face,TheLocation); | |
675 | Handle(Geom_Plane) Plane = Handle(Geom_Plane)::DownCast(Surface); | |
676 | if ( Plane.IsNull()) { | |
677 | isplanar = Standard_False; | |
678 | } | |
679 | else | |
680 | P = Plane->Pln(); | |
7fd59977 | 681 | } |
682 | stayfirst = Standard_True; | |
683 | break; | |
684 | ||
685 | case 'X': | |
686 | case 'x': | |
687 | i++; | |
688 | if (i >= n) goto badargs; | |
91322f44 | 689 | length = Draw::Atof(a[i]); |
7fd59977 | 690 | if ((a[i-1][1] == 'X') || (a[i-1][1] == 'x')) { |
73cd8a8a | 691 | length -= x; |
7fd59977 | 692 | } |
693 | dx = 1; dy = 0; | |
694 | move = line; | |
695 | break; | |
73cd8a8a | 696 | |
7fd59977 | 697 | case 'Y': |
698 | case 'y': | |
699 | i++; | |
700 | if (i >= n) goto badargs; | |
91322f44 | 701 | length = Draw::Atof(a[i]); |
7fd59977 | 702 | if ((a[i-1][1] == 'Y') || (a[i-1][1] == 'y')) { |
73cd8a8a | 703 | length -= y; |
7fd59977 | 704 | } |
705 | dx = 0; dy = 1; | |
706 | move = line; | |
707 | break; | |
73cd8a8a | 708 | |
7fd59977 | 709 | case 'L': |
710 | case 'l': | |
711 | i++; | |
712 | if (i >= n) goto badargs; | |
91322f44 | 713 | length = Draw::Atof(a[i]); |
7fd59977 | 714 | move = line; |
715 | break; | |
716 | ||
717 | case 'T': | |
718 | case 't': | |
719 | i += 2; | |
720 | if (i >= n) goto badargs; | |
721 | { | |
73cd8a8a | 722 | Standard_Real vx = Draw::Atof(a[i-1]); |
723 | Standard_Real vy = Draw::Atof(a[i]); | |
724 | if ((a[i-2][1] == 'T') || (a[i-2][1] == 't')) { | |
725 | vx -= x; | |
726 | vy -= y; | |
727 | } | |
728 | length = Sqrt(vx*vx+vy*vy); | |
729 | if (length > Precision::Confusion()) { | |
730 | move = line; | |
731 | dx = vx / length; | |
732 | dy = vy / length; | |
733 | } | |
7fd59977 | 734 | } |
735 | break; | |
736 | ||
737 | case 'R': | |
738 | case 'r': | |
739 | i++; | |
740 | if (i >= n) goto badargs; | |
91322f44 | 741 | angle = Draw::Atof(a[i]) * (M_PI / 180.0); |
7fd59977 | 742 | if ((a[i-1][1] == 'R') || (a[i-1][1] == 'r')) { |
73cd8a8a | 743 | dx = Cos(angle); |
744 | dy = Sin(angle); | |
7fd59977 | 745 | } |
746 | else { | |
73cd8a8a | 747 | Standard_Real c = Cos(angle); |
748 | Standard_Real s = Sin(angle); | |
749 | Standard_Real t = c * dx - s * dy; | |
750 | dy = s * dx + c * dy; | |
751 | dx = t; | |
7fd59977 | 752 | } |
753 | break; | |
754 | ||
755 | case 'D': | |
756 | case 'd': | |
757 | i += 2; | |
758 | if (i >= n) goto badargs; | |
759 | { | |
73cd8a8a | 760 | Standard_Real vx = Draw::Atof(a[i-1]); |
761 | Standard_Real vy = Draw::Atof(a[i]); | |
762 | length = Sqrt(vx*vx+vy*vy); | |
763 | if (length > Precision::Confusion()) { | |
764 | // move = line; DUB | |
765 | dx = vx / length; | |
766 | dy = vy / length; | |
767 | } | |
7fd59977 | 768 | } |
769 | break; | |
770 | ||
771 | case 'C': | |
772 | case 'c': | |
773 | i += 2; | |
774 | if (i >= n) goto badargs; | |
91322f44 | 775 | radius = Draw::Atof(a[i-1]); |
7fd59977 | 776 | if (Abs(radius) > Precision::Confusion()) { |
73cd8a8a | 777 | angle = Draw::Atof(a[i]) * (M_PI / 180.0); |
778 | move = circle; | |
7fd59977 | 779 | } |
780 | break; | |
781 | ||
782 | case 'I': | |
783 | case 'i': | |
784 | i++; | |
785 | if (i >= n) goto badargs; | |
91322f44 | 786 | length = Draw::Atof(a[i]); |
7fd59977 | 787 | if ((a[i-1][1] == 'X') || (a[i-1][1] == 'x')) { |
73cd8a8a | 788 | if (Abs(dx) < Precision::Confusion()) { |
789 | di << "Profile : cannot intersect, arg " << i-1; | |
790 | return 1; | |
791 | } | |
792 | length = (length - x) / dx; | |
793 | move = line; | |
7fd59977 | 794 | } |
795 | else if ((a[i-1][1] == 'Y') || (a[i-1][1] == 'y')) { | |
73cd8a8a | 796 | if (Abs(dy) < Precision::Confusion()) { |
797 | di << "Profile : cannot intersect, arg " << i-1; | |
798 | return 1; | |
799 | } | |
800 | length = (length - y) / dy; | |
801 | move = line; | |
7fd59977 | 802 | } |
73cd8a8a | 803 | |
7fd59977 | 804 | break; |
805 | ||
806 | case 'W': | |
807 | case 'w': | |
808 | face = Standard_False; | |
809 | if ((a[i][1] == 'W') || (a[i][1] == 'w')) { | |
73cd8a8a | 810 | close = Standard_False; |
7fd59977 | 811 | } |
812 | i = n-1; | |
813 | break; | |
814 | ||
815 | default: | |
816 | di <<"profile : unknown code " << a[i]; | |
817 | return 1; | |
818 | } | |
819 | ||
73cd8a8a | 820 | again: |
7fd59977 | 821 | |
822 | switch (move) { | |
73cd8a8a | 823 | |
7fd59977 | 824 | case line : |
825 | { | |
73cd8a8a | 826 | if (length < 0) { |
827 | length = -length; | |
828 | dx = -dx; | |
829 | dy = -dy; | |
830 | } | |
831 | Handle(Geom2d_Line) l = | |
832 | new Geom2d_Line(gp_Pnt2d(x,y),gp_Dir2d(dx,dy)); | |
833 | if (isplanar) | |
834 | MW.Add(BRepBuilderAPI_MakeEdge(GeomAPI::To3d(l,P),0,length)); | |
835 | else | |
836 | MW.Add(BRepBuilderAPI_MakeEdge(l,Surface,0,length)); | |
837 | x += length*dx; | |
838 | y += length*dy; | |
7fd59977 | 839 | } |
840 | break; | |
841 | ||
842 | case circle : | |
843 | { | |
73cd8a8a | 844 | Standard_Boolean sense = Standard_True; |
845 | if (radius < 0) { | |
846 | radius = -radius; | |
847 | sense = !sense; | |
848 | dx = -dx; | |
849 | dy = -dy; | |
850 | } | |
851 | gp_Ax2d ax(gp_Pnt2d(x-radius*dy,y+radius*dx),gp_Dir2d(dy,-dx)); | |
852 | if (angle < 0) { | |
853 | angle = -angle; | |
854 | sense = !sense; | |
855 | } | |
856 | Handle(Geom2d_Circle) c = new Geom2d_Circle(ax,radius,sense); | |
857 | if (isplanar) | |
858 | MW.Add(BRepBuilderAPI_MakeEdge(GeomAPI::To3d(c,P),0,angle)); | |
859 | else | |
860 | MW.Add(BRepBuilderAPI_MakeEdge(c,Surface,0,angle)); | |
861 | gp_Pnt2d p; | |
862 | gp_Vec2d v; | |
863 | c->D1(angle,p,v); | |
864 | x = p.X(); | |
865 | y = p.Y(); | |
866 | dx = v.X() / radius; | |
867 | dy = v.Y() / radius; | |
7fd59977 | 868 | } |
869 | break; | |
870 | ||
871 | case none: | |
872 | break; | |
873 | } | |
874 | ||
875 | // update first | |
876 | first = stayfirst; | |
877 | stayfirst = Standard_False; | |
878 | ||
879 | // next segment.... | |
880 | i++; | |
881 | if ((i == n) && close) { | |
882 | // the closing segment | |
883 | dx = x0-x; | |
884 | dy = y0-y; | |
885 | length = Sqrt(dx*dx+dy*dy); | |
886 | if (length > Precision::Confusion()) { | |
73cd8a8a | 887 | move = line; |
888 | dx = dx / length; | |
889 | dy = dy / length; | |
890 | goto again; | |
7fd59977 | 891 | } |
892 | } | |
893 | } | |
894 | ||
895 | ||
896 | // get the result, face or wire | |
897 | ||
898 | if (face) { | |
899 | if ( isplanar) | |
900 | S = BRepBuilderAPI_MakeFace(P,MW.Wire()); | |
901 | else { | |
902 | BRepBuilderAPI_MakeFace MFace; | |
1c72dff6 | 903 | MFace.Init(Surface,Standard_False,Precision::Confusion()); |
7fd59977 | 904 | MFace.Add(MW.Wire()); |
905 | S = MFace.Face(); | |
906 | } | |
907 | } | |
908 | else { | |
909 | S = MW; | |
910 | } | |
73cd8a8a | 911 | |
7fd59977 | 912 | if (!TheLocation.IsIdentity()) |
913 | S.Move(TheLocation); | |
914 | ||
915 | if ( !isplanar) { | |
916 | Standard_Real Tol = 1.e-5; | |
917 | BRepLib::BuildCurves3d(S,Tol); | |
918 | } | |
919 | ||
920 | DBRep::Set(a[1],S); | |
921 | ||
922 | return 0; | |
923 | ||
73cd8a8a | 924 | badargs: |
7fd59977 | 925 | di << "profile : bad number of arguments"; |
926 | return 1; | |
927 | } | |
928 | //======================================================================= | |
929 | // profile | |
930 | // command to build a profile | |
931 | //======================================================================= | |
932 | ||
933 | static Standard_Integer bsplineprof(Draw_Interpretor& di, | |
73cd8a8a | 934 | Standard_Integer n, |
935 | const char** a) | |
7fd59977 | 936 | { |
937 | // this command build a profile | |
938 | // from a moving point | |
939 | ||
940 | if (n == 1) { | |
941 | // print help | |
942 | ||
943 | //cout << " bsplineprof name [S face] [W WW] " << endl; | |
944 | //cout << " for an edge : <digitizes> ... <mouse button 2> " << endl ; | |
945 | //cout << " to end profile : <mouse button 3> " << endl ; | |
946 | //cout << " Build a profile in the XY plane from digitizes" << endl ; | |
947 | //cout << " By default the profile is closed and a face is built\n"; | |
948 | //cout << "\n"; | |
949 | //cout << " W Make a closed wire\n"; | |
950 | //cout << " WW Make an open wire\n"; | |
951 | //cout << endl; | |
952 | di << " bsplineprof name [S face] [W WW] " << "\n"; | |
953 | di << " for an edge : <digitizes> ... <mouse button 2> " << "\n"; | |
954 | di << " to end profile : <mouse button 3> " << "\n"; | |
955 | di << " Build a profile in the XY plane from digitizes" << "\n"; | |
956 | di << " By default the profile is closed and a face is built\n"; | |
957 | di << "\n"; | |
958 | di << " W Make a closed wire\n"; | |
959 | di << " WW Make an open wire\n"; | |
960 | di << "\n"; | |
961 | return 0; | |
962 | } | |
963 | ||
964 | gp_Pnt2d last_point(0.0e0, | |
73cd8a8a | 965 | 0.0e0) ; |
7fd59977 | 966 | gp_Pnt2d first_point(0.0e0, |
73cd8a8a | 967 | 0.0e0) ; |
7fd59977 | 968 | Standard_Integer i = 2, |
73cd8a8a | 969 | wait = 1 ; |
7fd59977 | 970 | // Standard_Real x0 = 0, y0 = 0, x = 0, y = 0, dx = 1, dy = 0; |
971 | Standard_Real x = 0, y = 0, dx = 1, dy = 0; | |
972 | BRepBuilderAPI_MakeWire MW; | |
973 | gp_Ax3 DummyHP(gp::XOY()); | |
974 | gp_Pln P(DummyHP); | |
975 | Standard_Boolean face = Standard_True; | |
976 | Standard_Boolean close = Standard_True; | |
977 | // Standard_Boolean first = Standard_True; | |
7fd59977 | 978 | Standard_Boolean isplanar = Standard_True; |
979 | Standard_Real length ; | |
980 | TopoDS_Shape S; | |
981 | TopLoc_Location TheLocation; | |
982 | Handle(Geom_Surface) Surface; | |
983 | if (n > 2) { | |
984 | while (i < n) { | |
73cd8a8a | 985 | |
7fd59977 | 986 | switch (a[i][0]) { |
73cd8a8a | 987 | |
7fd59977 | 988 | case 'S': |
989 | case 's': | |
73cd8a8a | 990 | i += 1; |
991 | { | |
992 | TopoDS_Shape aLocalShape(DBRep::Get(a[i],TopAbs_FACE)); | |
993 | TopoDS_Face Face = TopoDS::Face(aLocalShape); | |
994 | // TopoDS_Face Face = TopoDS::Face(DBRep::Get(a[i],TopAbs_FACE)); | |
995 | if (Face.IsNull()) { | |
996 | di << "profile : no face found"; | |
997 | return 1; | |
998 | } | |
999 | Surface = BRep_Tool::Surface(Face,TheLocation); | |
1000 | Handle(Geom_Plane) Plane = Handle(Geom_Plane)::DownCast(Surface); | |
1001 | if ( Plane.IsNull()) { | |
1002 | isplanar = Standard_False; | |
1003 | } | |
1004 | else | |
1005 | P = Plane->Pln(); | |
1006 | } | |
7fd59977 | 1007 | i += 1 ; |
73cd8a8a | 1008 | break; |
1009 | ||
7fd59977 | 1010 | case 'W': |
1011 | case 'w': | |
73cd8a8a | 1012 | face = Standard_False; |
1013 | if ((a[i][1] == 'W') || (a[i][1] == 'w')) { | |
1014 | close = Standard_False; | |
1015 | } | |
1016 | i = n-1; | |
1017 | break; | |
7fd59977 | 1018 | |
1019 | default: | |
73cd8a8a | 1020 | di <<"profile : unknown code " << a[i]; |
1021 | return 1; | |
7fd59977 | 1022 | } |
1023 | } | |
1024 | } | |
1025 | // | |
0d969553 Y |
1026 | // to be done : close the profile using the first point of the contour |
1027 | // and the point taken with mouse button 3 | |
7fd59977 | 1028 | // |
73cd8a8a | 1029 | Handle(Geom2d_BSplineCurve) C ; |
1030 | Handle(Geom_Curve) curve3d_ptr ; | |
1031 | Standard_Integer id, ii; | |
1032 | Standard_Integer X,Y,b, not_done; | |
1033 | Standard_Integer num_points = 0 ; | |
1034 | gp_Pnt2d a_point( 0.0e0, | |
1035 | 0.0e0) ; | |
7fd59977 | 1036 | Handle(TColgp_HArray1OfPnt2d) points_array_ptr = |
1037 | new TColgp_HArray1OfPnt2d(1, 1); | |
1038 | Handle(TColgp_HArray1OfPnt2d) new_points_array_ptr ; | |
1039 | ||
1040 | not_done = 1 ; | |
1041 | while (not_done) { | |
73cd8a8a | 1042 | |
1043 | dout.Select(id,X,Y,b,wait); | |
1044 | Standard_Real z = dout.Zoom(id); | |
1045 | a_point.SetCoord(1,(Standard_Real)X /z) ; | |
1046 | a_point.SetCoord(2,(Standard_Real)Y /z) ; | |
1047 | if (num_points == 0) { | |
1048 | points_array_ptr = | |
1049 | new TColgp_HArray1OfPnt2d(1, 1); | |
1050 | points_array_ptr->ChangeArray1()(1) = a_point ; | |
1051 | first_point = a_point ; | |
1052 | ||
1053 | } | |
1054 | num_points += 1 ; | |
1055 | if (num_points >= 2) { | |
1056 | new_points_array_ptr = | |
1057 | new TColgp_HArray1OfPnt2d(1, num_points); | |
1058 | for (ii = 1 ; ii <= num_points -1 ; ii++) { | |
1059 | new_points_array_ptr->ChangeArray1()(ii) = | |
1060 | points_array_ptr->Array1()(ii) ; | |
1061 | } | |
1062 | new_points_array_ptr->ChangeArray1()(num_points) = a_point ; | |
1063 | Geom2dAPI_Interpolate a2dInterpolator(new_points_array_ptr, | |
1064 | Standard_False, | |
1065 | 1.0e-5) ; | |
1066 | a2dInterpolator.Perform() ; | |
1067 | if (a2dInterpolator.IsDone()) { | |
1068 | C = a2dInterpolator.Curve() ; | |
1069 | curve3d_ptr = | |
1070 | GeomAPI::To3d(C,P) ; | |
1071 | DrawTrSurf::Set(a[1], curve3d_ptr); | |
1072 | dout.RepaintView(id); | |
1073 | } | |
1074 | points_array_ptr = new_points_array_ptr ; | |
1075 | ||
1076 | } | |
1077 | ||
1078 | if (b == 2 || b == 3) { | |
1079 | if (num_points == 2) { | |
7fd59977 | 1080 | x = last_point.Coord(1) ; |
1081 | y = last_point.Coord(2) ; | |
1082 | dx = a_point.Coord(1) - x ; | |
1083 | dy = a_point.Coord(2) - y ; | |
1084 | gp_Vec2d a_vector(dx, | |
73cd8a8a | 1085 | dy) ; |
7fd59977 | 1086 | length = a_vector.Magnitude() ; |
73cd8a8a | 1087 | Handle(Geom2d_Line) l = |
1088 | new Geom2d_Line(gp_Pnt2d(x,y),gp_Dir2d(dx,dy)); | |
1089 | if (isplanar) { | |
1090 | MW.Add(BRepBuilderAPI_MakeEdge(GeomAPI::To3d(l,P),0,length)); | |
7fd59977 | 1091 | } |
73cd8a8a | 1092 | else { |
1093 | MW.Add(BRepBuilderAPI_MakeEdge(l,Surface,0,length)); | |
7fd59977 | 1094 | } |
1095 | ||
1096 | } | |
73cd8a8a | 1097 | else if (num_points > 2) { |
7fd59977 | 1098 | if (isplanar) { |
73cd8a8a | 1099 | MW.Add(BRepBuilderAPI_MakeEdge(curve3d_ptr, |
1100 | curve3d_ptr->FirstParameter(), | |
1101 | curve3d_ptr->LastParameter())); | |
7fd59977 | 1102 | } |
73cd8a8a | 1103 | else { |
1104 | MW.Add(BRepBuilderAPI_MakeEdge(C, | |
1105 | Surface, | |
1106 | C->FirstParameter(), | |
1107 | C->LastParameter())); | |
7fd59977 | 1108 | } |
1109 | } | |
73cd8a8a | 1110 | if (num_points >= 2) { |
1111 | last_point = a_point ; | |
1112 | points_array_ptr->ChangeArray1()(1) = a_point ; | |
1113 | num_points = 1 ; | |
1114 | DBRep::Set(a[1], MW.Wire()) ; | |
1115 | } | |
1116 | ||
1117 | ||
1118 | } | |
1119 | if (b == 3) { | |
1120 | not_done = 0 ; | |
1121 | } | |
1122 | } | |
7fd59977 | 1123 | a_point = first_point ; |
1124 | if (close) { | |
73cd8a8a | 1125 | |
7fd59977 | 1126 | x = last_point.Coord(1) ; |
1127 | y = last_point.Coord(2) ; | |
1128 | dx = a_point.Coord(1) - x ; | |
1129 | dy = a_point.Coord(2) - y ; | |
1130 | gp_Vec2d a_vector(dx, | |
73cd8a8a | 1131 | dy) ; |
7fd59977 | 1132 | length = a_vector.Magnitude() ; |
1133 | Handle(Geom2d_Line) l = | |
1134 | new Geom2d_Line(gp_Pnt2d(x,y),gp_Dir2d(dx,dy)); | |
1135 | if (isplanar) | |
1136 | MW.Add(BRepBuilderAPI_MakeEdge(GeomAPI::To3d(l,P),0,length)); | |
1137 | else | |
1138 | MW.Add(BRepBuilderAPI_MakeEdge(l,Surface,0,length)); | |
1139 | } | |
1140 | if (face) { | |
1141 | if ( isplanar) | |
1142 | S = BRepBuilderAPI_MakeFace(P,MW.Wire()); | |
1143 | else { | |
1144 | BRepBuilderAPI_MakeFace MFace; | |
1c72dff6 | 1145 | MFace.Init(Surface,Standard_False,Precision::Confusion()); |
7fd59977 | 1146 | MFace.Add(MW.Wire()); |
1147 | S = MFace.Face(); | |
1148 | } | |
1149 | } | |
1150 | else { | |
1151 | S = MW; | |
1152 | } | |
73cd8a8a | 1153 | |
7fd59977 | 1154 | if (!TheLocation.IsIdentity()) |
1155 | S.Move(TheLocation); | |
73cd8a8a | 1156 | |
7fd59977 | 1157 | if ( !isplanar) { |
1158 | Standard_Real Tol = 1.e-5; | |
1159 | BRepLib::BuildCurves3d(S,Tol); | |
1160 | } | |
73cd8a8a | 1161 | |
7fd59977 | 1162 | DBRep::Set(a[1],S); |
73cd8a8a | 1163 | |
7fd59977 | 1164 | return 0; |
7fd59977 | 1165 | } |
1166 | ||
1167 | ||
1168 | ||
1169 | //======================================================================= | |
1170 | // 2dprofile | |
1171 | // command to build a profile | |
1172 | //======================================================================= | |
1173 | ||
1174 | static Standard_Integer profile2d(Draw_Interpretor& di, | |
73cd8a8a | 1175 | Standard_Integer n, |
1176 | const char** a) | |
7fd59977 | 1177 | { |
1178 | // this command build a profile with 2d curves. | |
1179 | // from a moving point | |
1180 | ||
1181 | if (n == 1) { | |
1182 | // print help | |
1183 | ||
1184 | //cout << "profile name [code values] [code values] ...\n"; | |
1185 | //cout << " Build a profile in the UV plane from a moving point and direction\n"; | |
1186 | //cout << " The original point and direction are 0 0 and 1 0\n"; | |
1187 | //cout << " Codes and values describe the point or direction change\n"; | |
1188 | //cout << " When the point change the direction becomes the tangent\n"; | |
1189 | //cout << " All angles are in degree (may be negative)\n"; | |
1190 | //cout << " By default the profile is closed \n"; | |
1191 | //cout << "\n"; | |
1192 | //cout << " Instruction Parameters Action\n"; | |
1193 | //cout << " F X Y Set the first point\n"; | |
1194 | //cout << " X DX Translate point along X\n"; | |
1195 | //cout << " Y DY Translate point along Y\n"; | |
1196 | //cout << " L DL Translate point along direction\n"; | |
1197 | //cout << " XX X Set point X coordinate\n"; | |
1198 | //cout << " YY Y Set point Y coordinate\n"; | |
1199 | //cout << " T DX DY Translate point\n"; | |
1200 | //cout << " TT X Y Set point\n"; | |
1201 | //cout << " R Angle Rotate direction\n"; | |
1202 | //cout << " RR Angle Set direction\n"; | |
1203 | //cout << " D DX DY Set direction\n"; | |
1204 | //cout << " IX X Intersect with vertical\n"; | |
1205 | //cout << " IY Y Intersect with horizontal\n"; | |
1206 | //cout << " C Radius Angle Arc of circle tangent to direction\n"; | |
1207 | //cout << " W Make a closed wire\n"; | |
1208 | //cout << endl; | |
1209 | di << "profile name [code values] [code values] ...\n"; | |
1210 | di << " Build a profile in the UV plane from a moving point and direction\n"; | |
1211 | di << " The original point and direction are 0 0 and 1 0\n"; | |
1212 | di << " Codes and values describe the point or direction change\n"; | |
1213 | di << " When the point change the direction becomes the tangent\n"; | |
1214 | di << " All angles are in degree (may be negative)\n"; | |
1215 | di << " By default the profile is closed \n"; | |
1216 | di << "\n"; | |
1217 | di << " Instruction Parameters Action\n"; | |
1218 | di << " F X Y Set the first point\n"; | |
1219 | di << " X DX Translate point along X\n"; | |
1220 | di << " Y DY Translate point along Y\n"; | |
1221 | di << " L DL Translate point along direction\n"; | |
1222 | di << " XX X Set point X coordinate\n"; | |
1223 | di << " YY Y Set point Y coordinate\n"; | |
1224 | di << " T DX DY Translate point\n"; | |
1225 | di << " TT X Y Set point\n"; | |
1226 | di << " R Angle Rotate direction\n"; | |
1227 | di << " RR Angle Set direction\n"; | |
1228 | di << " D DX DY Set direction\n"; | |
1229 | di << " IX X Intersect with vertical\n"; | |
1230 | di << " IY Y Intersect with horizontal\n"; | |
1231 | di << " C Radius Angle Arc of circle tangent to direction\n"; | |
1232 | di << " W Make a closed wire\n"; | |
1233 | di << "\n"; | |
1234 | return 0; | |
1235 | } | |
1236 | ||
1237 | Standard_Integer i = 2, NbCurves = 0; | |
1238 | Standard_Real x0 = 0, y0 = 0, x = 0, y = 0, dx = 1, dy = 0; | |
1239 | enum {line , circle, none} move; | |
1240 | Standard_Boolean close = Standard_True; | |
1241 | Standard_Boolean first = Standard_True; | |
1242 | Standard_Boolean stayfirst = Standard_False; | |
1243 | char* name = new char[100]; | |
1244 | ||
1245 | while (i < n) { | |
1246 | ||
1247 | Standard_Real length=0,radius=0,angle=0; | |
1248 | move = none; | |
1249 | ||
1250 | switch (a[i][0]) { | |
1251 | ||
1252 | case 'F': | |
1253 | case 'f': | |
1254 | i += 2; | |
1255 | if (i >= n) goto badargs; | |
1256 | if (!first) { | |
73cd8a8a | 1257 | di << "profile: The F instruction must precede all moves"; |
1258 | return 1; | |
7fd59977 | 1259 | } |
91322f44 | 1260 | x0 = x = Draw::Atof(a[i-1]); |
1261 | y0 = y = Draw::Atof(a[i]); | |
7fd59977 | 1262 | stayfirst = Standard_True; |
1263 | break; | |
1264 | ||
1265 | case 'X': | |
1266 | case 'x': | |
1267 | i++; | |
1268 | if (i >= n) goto badargs; | |
91322f44 | 1269 | length = Draw::Atof(a[i]); |
7fd59977 | 1270 | if ((a[i-1][1] == 'X') || (a[i-1][1] == 'x')) { |
73cd8a8a | 1271 | length -= x; |
7fd59977 | 1272 | } |
1273 | dx = 1; dy = 0; | |
1274 | move = line; | |
1275 | break; | |
73cd8a8a | 1276 | |
7fd59977 | 1277 | case 'Y': |
1278 | case 'y': | |
1279 | i++; | |
1280 | if (i >= n) goto badargs; | |
91322f44 | 1281 | length = Draw::Atof(a[i]); |
7fd59977 | 1282 | if ((a[i-1][1] == 'Y') || (a[i-1][1] == 'y')) { |
73cd8a8a | 1283 | length -= y; |
7fd59977 | 1284 | } |
1285 | dx = 0; dy = 1; | |
1286 | move = line; | |
1287 | break; | |
73cd8a8a | 1288 | |
7fd59977 | 1289 | case 'L': |
1290 | case 'l': | |
1291 | i++; | |
1292 | if (i >= n) goto badargs; | |
91322f44 | 1293 | length = Draw::Atof(a[i]); |
7fd59977 | 1294 | move = line; |
1295 | break; | |
1296 | ||
1297 | case 'T': | |
1298 | case 't': | |
1299 | i += 2; | |
1300 | if (i >= n) goto badargs; | |
1301 | { | |
73cd8a8a | 1302 | Standard_Real vx = Draw::Atof(a[i-1]); |
1303 | Standard_Real vy = Draw::Atof(a[i]); | |
1304 | if ((a[i-2][1] == 'T') || (a[i-2][1] == 't')) { | |
1305 | vx -= x; | |
1306 | vy -= y; | |
1307 | } | |
1308 | length = Sqrt(vx*vx+vy*vy); | |
1309 | if (length > Precision::Confusion()) { | |
1310 | move = line; | |
1311 | dx = vx / length; | |
1312 | dy = vy / length; | |
1313 | } | |
7fd59977 | 1314 | } |
1315 | break; | |
1316 | ||
1317 | case 'R': | |
1318 | case 'r': | |
1319 | i++; | |
1320 | if (i >= n) goto badargs; | |
91322f44 | 1321 | angle = Draw::Atof(a[i]) * (M_PI / 180.0); |
7fd59977 | 1322 | if ((a[i-1][1] == 'R') || (a[i-1][1] == 'r')) { |
73cd8a8a | 1323 | dx = Cos(angle); |
1324 | dy = Sin(angle); | |
7fd59977 | 1325 | } |
1326 | else { | |
73cd8a8a | 1327 | Standard_Real c = Cos(angle); |
1328 | Standard_Real s = Sin(angle); | |
1329 | Standard_Real t = c * dx - s * dy; | |
1330 | dy = s * dx + c * dy; | |
1331 | dx = t; | |
7fd59977 | 1332 | } |
1333 | break; | |
1334 | ||
1335 | case 'D': | |
1336 | case 'd': | |
1337 | i += 2; | |
1338 | if (i >= n) goto badargs; | |
1339 | { | |
73cd8a8a | 1340 | Standard_Real vx = Draw::Atof(a[i-1]); |
1341 | Standard_Real vy = Draw::Atof(a[i]); | |
1342 | length = Sqrt(vx*vx+vy*vy); | |
1343 | if (length > Precision::Confusion()) { | |
1344 | // move = line; DUB | |
1345 | dx = vx / length; | |
1346 | dy = vy / length; | |
1347 | } | |
7fd59977 | 1348 | } |
1349 | break; | |
1350 | ||
1351 | case 'C': | |
1352 | case 'c': | |
1353 | i += 2; | |
1354 | if (i >= n) goto badargs; | |
91322f44 | 1355 | radius = Draw::Atof(a[i-1]); |
7fd59977 | 1356 | if (Abs(radius) > Precision::Confusion()) { |
73cd8a8a | 1357 | angle = Draw::Atof(a[i]) * (M_PI / 180.0); |
1358 | move = circle; | |
7fd59977 | 1359 | } |
1360 | break; | |
1361 | ||
1362 | case 'I': | |
1363 | case 'i': | |
1364 | i++; | |
1365 | if (i >= n) goto badargs; | |
91322f44 | 1366 | length = Draw::Atof(a[i]); |
7fd59977 | 1367 | if ((a[i-1][1] == 'X') || (a[i-1][1] == 'x')) { |
73cd8a8a | 1368 | if (Abs(dx) < Precision::Confusion()) { |
1369 | di << "Profile : cannot intersect, arg " << i-1; | |
1370 | return 1; | |
1371 | } | |
1372 | length = (length - x) / dx; | |
1373 | move = line; | |
7fd59977 | 1374 | } |
1375 | else if ((a[i-1][1] == 'Y') || (a[i-1][1] == 'y')) { | |
73cd8a8a | 1376 | if (Abs(dy) < Precision::Confusion()) { |
1377 | di << "Profile : cannot intersect, arg " << i-1; | |
1378 | return 1; | |
1379 | } | |
1380 | length = (length - y) / dy; | |
1381 | move = line; | |
7fd59977 | 1382 | } |
73cd8a8a | 1383 | |
7fd59977 | 1384 | break; |
1385 | ||
1386 | case 'W': | |
1387 | case 'w': | |
1388 | close = Standard_False; | |
1389 | i = n-1; | |
1390 | break; | |
73cd8a8a | 1391 | |
7fd59977 | 1392 | default: |
1393 | di <<"profile : unknown code " << a[i]; | |
1394 | return 1; | |
1395 | } | |
1396 | ||
73cd8a8a | 1397 | again: |
1398 | ||
7fd59977 | 1399 | switch (move) { |
73cd8a8a | 1400 | |
7fd59977 | 1401 | case line : |
1402 | { | |
73cd8a8a | 1403 | if (length < 0) { |
1404 | length = -length; | |
1405 | dx = -dx; | |
1406 | dy = -dy; | |
1407 | } | |
1408 | Handle(Geom2d_Line) l = new Geom2d_Line(gp_Pnt2d(x,y),gp_Dir2d(dx,dy)); | |
1409 | Handle(Geom2d_TrimmedCurve) ct = | |
1410 | new Geom2d_TrimmedCurve(l,0,length); | |
1411 | NbCurves++; | |
1412 | Sprintf(name,"%s_%d",a[1],NbCurves); | |
1413 | DrawTrSurf::Set(name,ct); | |
1414 | di.AppendElement(name); | |
1415 | x += length*dx; | |
1416 | y += length*dy; | |
7fd59977 | 1417 | } |
1418 | break; | |
1419 | ||
1420 | case circle : | |
1421 | { | |
73cd8a8a | 1422 | Standard_Boolean sense = Standard_True; |
1423 | if (radius < 0) { | |
1424 | radius = -radius; | |
1425 | sense = !sense; | |
1426 | dx = -dx; | |
1427 | dy = -dy; | |
1428 | } | |
1429 | gp_Ax2d ax(gp_Pnt2d(x-radius*dy,y+radius*dx),gp_Dir2d(dy,-dx)); | |
1430 | if (angle < 0) { | |
1431 | angle = -angle; | |
1432 | sense = !sense; | |
1433 | } | |
1434 | Handle(Geom2d_Circle) c = new Geom2d_Circle(ax,radius,sense); | |
1435 | Handle(Geom2d_TrimmedCurve) ct = | |
1436 | new Geom2d_TrimmedCurve(c,0,angle); | |
1437 | NbCurves++; | |
1438 | Sprintf(name,"%s_%d",a[1],NbCurves); | |
1439 | DrawTrSurf::Set(name,ct); | |
1440 | di.AppendElement(name); | |
1441 | gp_Pnt2d p; | |
1442 | gp_Vec2d v; | |
1443 | c->D1(angle,p,v); | |
1444 | x = p.X(); | |
1445 | y = p.Y(); | |
1446 | dx = v.X() / radius; | |
1447 | dy = v.Y() / radius; | |
7fd59977 | 1448 | } |
1449 | break; | |
1450 | ||
1451 | case none: | |
1452 | break; | |
1453 | } | |
1454 | ||
1455 | // update first | |
1456 | first = stayfirst; | |
1457 | stayfirst = Standard_False; | |
1458 | ||
1459 | // next segment.... | |
1460 | i++; | |
1461 | if ((i == n) && close) { | |
1462 | // the closing segment | |
1463 | dx = x0-x; | |
1464 | dy = y0-y; | |
1465 | length = Sqrt(dx*dx+dy*dy); | |
1466 | if (length > Precision::Confusion()) { | |
73cd8a8a | 1467 | move = line; |
1468 | dx = dx / length; | |
1469 | dy = dy / length; | |
1470 | goto again; | |
7fd59977 | 1471 | } |
1472 | } | |
1473 | } | |
1474 | const char* aName; | |
1475 | aName = "CurX"; | |
1476 | Draw::Set(aName, x); | |
1477 | aName = "CurY"; | |
1478 | Draw::Set(aName, y); | |
1479 | aName = "CurDX"; | |
1480 | Draw::Set(aName, dx); | |
1481 | aName = "CurDY"; | |
1482 | Draw::Set(aName, dy); | |
1483 | ||
1484 | return 0; | |
1485 | ||
73cd8a8a | 1486 | badargs: |
7fd59977 | 1487 | di << "profile : bad number of arguments"; |
1488 | return 1; | |
1489 | } | |
1490 | ||
1491 | ||
1492 | ||
1493 | //======================================================================= | |
1494 | //function : mkoffset | |
1495 | //purpose : | |
1496 | //======================================================================= | |
1497 | ||
1498 | Standard_Integer mkoffset(Draw_Interpretor& di, | |
73cd8a8a | 1499 | Standard_Integer n, const char** a) |
7fd59977 | 1500 | { |
1501 | if (n < 5) return 1; | |
1502 | char name[100]; | |
1503 | ||
1504 | BRepOffsetAPI_MakeOffset Paral; | |
6a442250 | 1505 | Paral.Init(GeomAbs_Arc); |
7fd59977 | 1506 | TopoDS_Shape Base = DBRep::Get(a[2],TopAbs_FACE); |
1507 | ||
ab87e6fc | 1508 | if ( Base.IsNull()) |
73cd8a8a | 1509 | { |
7fd59977 | 1510 | Base = DBRep::Get(a[2]); |
1511 | if (Base.IsNull()) return 1; | |
1512 | Paral.Init(GeomAbs_Arc); | |
1513 | TopExp_Explorer exp; | |
ab87e6fc | 1514 | for (exp.Init(Base,TopAbs_WIRE); exp.More(); exp.Next()) |
73cd8a8a | 1515 | { |
7fd59977 | 1516 | TopoDS_Wire aLocalShape = TopoDS::Wire(exp.Current()); |
1517 | Paral.AddWire(aLocalShape); | |
7fd59977 | 1518 | } |
73cd8a8a | 1519 | } |
ab87e6fc | 1520 | else |
73cd8a8a | 1521 | { |
7fd59977 | 1522 | Base.Orientation(TopAbs_FORWARD); |
7fd59977 | 1523 | Paral.Init(TopoDS::Face(Base)); |
73cd8a8a | 1524 | } |
7fd59977 | 1525 | |
1526 | Standard_Real U, dU; | |
1527 | Standard_Integer Nb; | |
91322f44 | 1528 | dU = Draw::Atof(a[4]); |
1529 | Nb = Draw::Atoi(a[3]); | |
7fd59977 | 1530 | |
1531 | Standard_Real Alt = 0.; | |
ab87e6fc | 1532 | if ( n == 6) |
1533 | Alt = Draw::Atof(a[5]); | |
1534 | ||
7fd59977 | 1535 | Standard_Integer Compt = 1; |
1536 | ||
ab87e6fc | 1537 | for ( Standard_Integer i = 1; i <= Nb; i++) |
73cd8a8a | 1538 | { |
7fd59977 | 1539 | U = i * dU; |
1540 | Paral.Perform(U,Alt); | |
ab87e6fc | 1541 | |
1542 | if ( !Paral.IsDone()) | |
73cd8a8a | 1543 | { |
ab87e6fc | 1544 | di << " Error: Offset is not done." << "\n"; |
1545 | return 1; | |
73cd8a8a | 1546 | } |
ab87e6fc | 1547 | else |
73cd8a8a | 1548 | { |
91322f44 | 1549 | Sprintf(name,"%s_%d", a[1], Compt++); |
7fd59977 | 1550 | char* temp = name; // portage WNT |
1551 | DBRep::Set(temp,Paral.Shape()); | |
1552 | } | |
73cd8a8a | 1553 | } |
ab87e6fc | 1554 | |
7fd59977 | 1555 | return 0; |
73cd8a8a | 1556 | } |
7fd59977 | 1557 | |
6a442250 | 1558 | //======================================================================= |
1559 | //function : openoffset | |
1560 | //purpose : | |
1561 | //======================================================================= | |
1562 | ||
1563 | Standard_Integer openoffset(Draw_Interpretor& di, | |
1564 | Standard_Integer n, const char** a) | |
1565 | { | |
1566 | if (n < 5) return 1; | |
1567 | char name[100]; | |
1568 | ||
1569 | TopoDS_Shape Base = DBRep::Get(a[2], TopAbs_WIRE); | |
1570 | ||
1571 | BRepOffsetAPI_MakeOffset Paral(TopoDS::Wire(Base), GeomAbs_Arc, Standard_True); | |
1572 | ||
1573 | Standard_Real U, dU; | |
1574 | Standard_Integer Nb; | |
1575 | dU = Draw::Atof(a[4]); | |
1576 | Nb = Draw::Atoi(a[3]); | |
1577 | ||
1578 | Standard_Integer Compt = 1; | |
1579 | ||
1580 | Standard_Real Alt = 0.; | |
1581 | for ( Standard_Integer i = 1; i <= Nb; i++) | |
1582 | { | |
1583 | U = i * dU; | |
1584 | Paral.Perform(U,Alt); | |
1585 | ||
1586 | if ( !Paral.IsDone()) | |
1587 | { | |
1588 | di << " Error: Offset is not done." << "\n"; | |
1589 | return 1; | |
1590 | } | |
1591 | else | |
1592 | { | |
1593 | Sprintf(name,"%s_%d", a[1], Compt++); | |
1594 | char* temp = name; // portage WNT | |
1595 | DBRep::Set(temp,Paral.Shape()); | |
1596 | } | |
1597 | } | |
1598 | ||
1599 | return 0; | |
1600 | } | |
1601 | ||
7fd59977 | 1602 | //======================================================================= |
1603 | //function : pickface | |
1604 | //purpose : | |
1605 | //======================================================================= | |
1606 | ||
1607 | Standard_Integer pickface(Draw_Interpretor& di, | |
73cd8a8a | 1608 | Standard_Integer , const char** ) |
7fd59977 | 1609 | { |
1610 | Standard_CString pick_name="."; | |
73cd8a8a | 1611 | |
7fd59977 | 1612 | TopoDS_Shape S = DBRep::Get(pick_name,TopAbs_FACE); |
1613 | if (S.IsNull()) return 1; | |
73cd8a8a | 1614 | |
7fd59977 | 1615 | char* name = new char[100]; |
91322f44 | 1616 | Sprintf(name,"PickedFace %s",pick_name); |
7fd59977 | 1617 | DBRep::Set(name,S); |
1618 | di.AppendElement(name); | |
1619 | return 0; | |
1620 | } | |
1621 | ||
1622 | ||
1623 | Standard_Integer edgeintersector(Draw_Interpretor& di, | |
73cd8a8a | 1624 | Standard_Integer n, const char** a) |
7fd59977 | 1625 | { |
1626 | if (n < 5) return 1; | |
1627 | ||
1628 | TopoDS_Edge E[2]; | |
1629 | TopoDS_Shape aLocalShape(DBRep::Get(a[2],TopAbs_EDGE)); | |
1630 | E[0] = TopoDS::Edge(aLocalShape); | |
1631 | // E[0] = TopoDS::Edge(DBRep::Get(a[2],TopAbs_EDGE)); | |
1632 | if ( E[0].IsNull()) return 1; | |
1633 | aLocalShape = DBRep::Get(a[3],TopAbs_EDGE); | |
1634 | E[1] = TopoDS::Edge(aLocalShape); | |
1635 | // E[1] = TopoDS::Edge(DBRep::Get(a[3],TopAbs_EDGE)); | |
1636 | if ( E[1].IsNull()) return 1; | |
1637 | aLocalShape = DBRep::Get(a[4],TopAbs_FACE); | |
1638 | TopoDS_Face F = TopoDS::Face(aLocalShape); | |
1639 | // TopoDS_Face F = TopoDS::Face(DBRep::Get(a[4],TopAbs_FACE)); | |
1640 | if ( F.IsNull()) return 1; | |
73cd8a8a | 1641 | |
7fd59977 | 1642 | TopOpeBRep_EdgesIntersector EInter; |
1643 | char name[100]; | |
1644 | //------------------------------------------------------ | |
0d969553 | 1645 | // Calculate point of intersection 2D |
7fd59977 | 1646 | //----------------------------------------------------- |
1647 | EInter.SetFaces(F,F); | |
1648 | Standard_Real TolInter = 1.e-7; | |
91322f44 | 1649 | if (n == 6) TolInter = Draw::Atof(a[5]); |
7fd59977 | 1650 | EInter.ForceTolerances(TolInter,TolInter); |
1651 | Standard_Boolean reducesegments = Standard_True; | |
1652 | EInter.Perform (E[0],E[1],reducesegments); | |
73cd8a8a | 1653 | |
7fd59977 | 1654 | if (EInter.IsEmpty()) { |
0d969553 Y |
1655 | //cout << " No intersection found" << endl; |
1656 | di << " No intersection found" << "\n"; | |
7fd59977 | 1657 | return 0; |
1658 | } | |
1659 | ||
1660 | BRep_Builder B; | |
1661 | ||
1662 | Standard_Integer NbV = 0; | |
1663 | Standard_Real Tol = Precision::PConfusion(); | |
1664 | ||
1665 | Standard_Boolean rejectreducedsegmentpoints = Standard_True; | |
1666 | EInter.InitPoint(rejectreducedsegmentpoints); | |
1667 | for (;EInter.MorePoint();EInter.NextPoint()) { | |
1668 | const TopOpeBRep_Point2d& P2D = EInter.Point(); | |
1669 | gp_Pnt P = P2D.Value(); | |
1670 | TopoDS_Vertex V = BRepLib_MakeVertex(P); | |
1671 | NbV ++; | |
91322f44 | 1672 | Sprintf(name,"%s_%d",a[1],NbV); |
7fd59977 | 1673 | DBRep::Set(name,V); |
1674 | for (Standard_Integer i = 1; i <= 2; i++) { | |
1675 | //--------------------------------------------------------------- | |
0d969553 Y |
1676 | // to be able to rank parameter on edge |
1677 | // it is necessary to code it internally | |
7fd59977 | 1678 | //--------------------------------------------------------------- |
1679 | Standard_Real U = P2D.Parameter(i); | |
73cd8a8a | 1680 | |
7fd59977 | 1681 | V.Orientation(TopAbs_INTERNAL); |
1682 | B.UpdateVertex(V,U,E[i-1],Tol); | |
73cd8a8a | 1683 | // B.UpdateVertex(TopoDS::Vertex(V.Oriented(TopAbs_INTERNAL)), |
1684 | // U,E[i-1],Tol); | |
7fd59977 | 1685 | //--------------------------------------------------------------- |
0d969553 | 1686 | // Orientation of vertex in the transition. |
7fd59977 | 1687 | //--------------------------------------------------------------- |
1688 | TopAbs_Orientation OO = TopAbs_REVERSED; | |
1689 | if (P2D.IsVertex(i)) { | |
73cd8a8a | 1690 | OO = P2D.Vertex(i).Orientation(); |
7fd59977 | 1691 | } |
1692 | else if (P2D.Transition(i).Before() == TopAbs_OUT) { | |
73cd8a8a | 1693 | OO = TopAbs_FORWARD; |
7fd59977 | 1694 | } |
0d969553 Y |
1695 | //cout << " Orientation of vertex " << NbV << " on " << a[i+1] << ": "; |
1696 | di << " Orientation of vertex " << NbV << " on " << a[i+1] << ": "; | |
7fd59977 | 1697 | if (OO == TopAbs_FORWARD) { |
73cd8a8a | 1698 | //cout << "FORWARD" << endl; |
1699 | di << "FORWARD" << "\n"; | |
7fd59977 | 1700 | } else { |
73cd8a8a | 1701 | //cout << "REVERSED" << endl; |
1702 | di << "REVERSED" << "\n"; | |
7fd59977 | 1703 | } |
1704 | } | |
1705 | } | |
1706 | //POP pour NT | |
1707 | return 0; | |
1708 | ||
1709 | } | |
51a849d7 | 1710 | |
1711 | //======================================================================= | |
1712 | //function : concatC0wire | |
1713 | //purpose : | |
1714 | //======================================================================= | |
1715 | ||
1716 | Standard_Integer concatC0wire(Draw_Interpretor&, Standard_Integer n, const char** c) | |
1717 | { | |
1718 | if ( n < 3 ) return 1; | |
73cd8a8a | 1719 | |
51a849d7 | 1720 | TopoDS_Shape S = DBRep::Get(c[2],TopAbs_WIRE) ; |
1721 | ||
1722 | if (S.IsNull()) | |
1723 | return 1; //test if the shape is empty | |
73cd8a8a | 1724 | |
51a849d7 | 1725 | TopoDS_Wire W = TopoDS::Wire(S) ; |
1726 | TopoDS_Shape res; | |
1727 | ||
1728 | ||
1729 | res = BRepAlgo::ConcatenateWireC0(W); //treatment | |
1730 | DBRep::Set(c[1], res); | |
1731 | return 0; | |
1732 | } | |
1733 | ||
7fd59977 | 1734 | //======================================================================= |
1735 | //function : concatwire | |
1736 | //purpose : reduce the multiply degree of the knots to the minimum without | |
1737 | // changing the geometry | |
1738 | //======================================================================= | |
1739 | ||
1740 | static Standard_Integer concatwire(Draw_Interpretor&, Standard_Integer n, const char** c) | |
73cd8a8a | 1741 | { |
1742 | GeomAbs_Shape Option=GeomAbs_C1; | |
1743 | if ( n < 3 ) return 1; | |
7fd59977 | 1744 | |
7fd59977 | 1745 | if(n==4) //check if it's C1 or G1 |
73cd8a8a | 1746 | if (! strcmp(c[3],"G1")) |
1747 | Option=GeomAbs_G1; | |
1748 | ||
7fd59977 | 1749 | TopoDS_Shape S = DBRep::Get(c[2],TopAbs_WIRE) ; |
1750 | ||
1751 | if (S.IsNull()) return 1 ; //test if the shape is empty | |
1752 | ||
1753 | TopoDS_Wire W = TopoDS::Wire(S) ; | |
1754 | TopoDS_Wire res; | |
0d969553 | 1755 | res=BRepAlgo::ConcatenateWire(W,Option); //processing |
7fd59977 | 1756 | DBRep::Set(c[1],res); |
1757 | return 0; | |
1758 | } | |
1759 | ||
1760 | //======================================================================= | |
1761 | //function : build3d | |
1762 | //purpose : | |
1763 | //======================================================================= | |
1764 | ||
1765 | Standard_Integer build3d(Draw_Interpretor& di, | |
73cd8a8a | 1766 | Standard_Integer n, const char** a) |
7fd59977 | 1767 | { |
1768 | ||
1769 | if ( (n <2) || (n>3) ) { | |
0d969553 Y |
1770 | //cout << " 1 or 2 arguments expected" << endl; |
1771 | di << " 1 or 2 arguments expected" << "\n"; | |
7fd59977 | 1772 | return 1; |
1773 | } | |
73cd8a8a | 1774 | |
7fd59977 | 1775 | Standard_Boolean Ok; |
1776 | TopoDS_Shape S = DBRep::Get(a[1],TopAbs_FACE); | |
1777 | if (S.IsNull()) return 1; | |
73cd8a8a | 1778 | |
7fd59977 | 1779 | if (n==2) { Ok = BRepLib::BuildCurves3d(S); } |
91322f44 | 1780 | else { Ok = BRepLib::BuildCurves3d(S,Draw::Atof(a[2])); } |
7fd59977 | 1781 | //if (!Ok) {cout << " one of the computation failed" << endl;} |
1782 | if (!Ok) {di << " one of the computation failed" << "\n";} | |
1783 | ||
1784 | return 0; | |
1785 | } | |
1786 | ||
01697018 J |
1787 | //======================================================================= |
1788 | //function : reducepcurves | |
1789 | //purpose : remove pcurves that are unused in this shape | |
1790 | //======================================================================= | |
1791 | ||
1792 | Standard_Integer reducepcurves(Draw_Interpretor& di, | |
73cd8a8a | 1793 | Standard_Integer n, const char** a) |
01697018 J |
1794 | { |
1795 | if (n < 2) return 1; | |
1796 | ||
1797 | Standard_Integer i; | |
1798 | for (i = 1; i < n; i++) | |
1799 | { | |
1800 | TopoDS_Shape aShape = DBRep::Get(a[i]); | |
1801 | if (aShape.IsNull()) | |
1802 | //cout << a[i] << " is not a valid shape" << endl; | |
1803 | di << a[i] << " is not a valid shape" << "\n"; | |
1804 | else | |
1805 | BRepTools::RemoveUnusedPCurves(aShape); | |
1806 | } | |
73cd8a8a | 1807 | |
01697018 J |
1808 | return 0; |
1809 | } | |
7fd59977 | 1810 | |
1811 | //======================================================================= | |
1812 | //function : CurveCommands | |
1813 | //purpose : | |
1814 | //======================================================================= | |
1815 | ||
1816 | void BRepTest::CurveCommands(Draw_Interpretor& theCommands) | |
1817 | { | |
1818 | static Standard_Boolean done = Standard_False; | |
1819 | if (done) return; | |
1820 | done = Standard_True; | |
1821 | ||
1822 | DBRep::BasicCommands(theCommands); | |
1823 | GeometryTest::CurveCommands(theCommands); | |
1824 | ||
1825 | const char* g = "TOPOLOGY Curve topology commands"; | |
1826 | ||
1827 | theCommands.Add("vertex", | |
c858bb10 | 1828 | "vertex name [x y z | p edge | poin]",__FILE__, |
73cd8a8a | 1829 | vertex,g); |
7fd59977 | 1830 | |
1831 | theCommands.Add("etrim", | |
73cd8a8a | 1832 | "etrim edge v1 [v2]",__FILE__, |
1833 | trim,g); | |
7fd59977 | 1834 | |
1835 | theCommands.Add("range", | |
73cd8a8a | 1836 | "range edge [face] first last",__FILE__, |
1837 | range,g); | |
7fd59977 | 1838 | |
1839 | theCommands.Add("polyline", | |
73cd8a8a | 1840 | "polyline name x1 y1 z1 x2 y2 z2 ...",__FILE__, |
1841 | polyline,g); | |
7fd59977 | 1842 | |
1843 | theCommands.Add("polyvertex", | |
73cd8a8a | 1844 | "polyvertex name v1 v2 ...",__FILE__, |
1845 | polyvertex,g); | |
7fd59977 | 1846 | |
1847 | theCommands.Add("wire", | |
73cd8a8a | 1848 | "wire wirename e1/w1 [e2/w2 ...]",__FILE__, |
1849 | wire,g); | |
7fd59977 | 1850 | |
1851 | theCommands.Add("profile", | |
73cd8a8a | 1852 | "profile, no args to get help",__FILE__, |
1853 | profile,g); | |
7fd59977 | 1854 | |
1855 | theCommands.Add("bsplineprof", | |
73cd8a8a | 1856 | "bsplineprof, no args to get help",__FILE__, |
1857 | bsplineprof,g); | |
7fd59977 | 1858 | |
1859 | theCommands.Add("2dprofile", | |
73cd8a8a | 1860 | "2dprofile, no args to get help",__FILE__, |
1861 | profile2d,g); | |
7fd59977 | 1862 | |
1863 | theCommands.Add("mkoffset", | |
73cd8a8a | 1864 | "mkoffset result face/compound of wires nboffset stepoffset [alt]",__FILE__, |
1865 | mkoffset); | |
7fd59977 | 1866 | |
6a442250 | 1867 | theCommands.Add("openoffset", |
1868 | "openoffset result wire nboffset stepoffset",__FILE__, | |
1869 | openoffset); | |
7fd59977 | 1870 | |
1871 | theCommands.Add("mkedge", | |
73cd8a8a | 1872 | "mkedge edge curve [surface] [pfirst plast] [vfirst [pfirst] vlast [plast]] ",__FILE__, |
1873 | mkedge,g); | |
1874 | ||
7fd59977 | 1875 | theCommands.Add("mkcurve", |
73cd8a8a | 1876 | "mkcurve curve edge",__FILE__, |
1877 | mkcurve,g); | |
7fd59977 | 1878 | |
1879 | theCommands.Add("mkoricurve", | |
73cd8a8a | 1880 | "mkoricurve curve edge: \n the curve is colored according to the orientation of the edge", |
1881 | __FILE__, | |
1882 | mkcurve,g); | |
7fd59977 | 1883 | |
1884 | theCommands.Add("mk2dcurve", | |
a86d3ec0 | 1885 | "mk2dcurve curve edge [face OR index]",__FILE__, |
73cd8a8a | 1886 | mk2dcurve,g); |
7fd59977 | 1887 | |
1888 | theCommands.Add("mkpoint", | |
73cd8a8a | 1889 | "mkpoint point vertex",__FILE__, |
1890 | mkpoint,g); | |
7fd59977 | 1891 | |
1892 | theCommands.Add("uisoedge", | |
73cd8a8a | 1893 | "uisoedge edge face u v1 v2",__FILE__, |
1894 | isoedge,g); | |
1895 | ||
7fd59977 | 1896 | theCommands.Add("edge", |
73cd8a8a | 1897 | "edge edgename v1 v2",__FILE__, |
1898 | edge,g); | |
1899 | ||
7fd59977 | 1900 | theCommands.Add("visoedge", |
73cd8a8a | 1901 | "visoedge edge face v u1 u2",__FILE__, |
1902 | isoedge,g); | |
7fd59977 | 1903 | |
1904 | theCommands.Add("transfert", | |
73cd8a8a | 1905 | "transfert edge1 edge2",__FILE__, |
1906 | transfert,g); | |
7fd59977 | 1907 | |
1908 | theCommands.Add("pickface", | |
73cd8a8a | 1909 | "pickface",__FILE__, |
1910 | pickface,g); | |
7fd59977 | 1911 | |
1912 | theCommands.Add("edgeintersector", | |
73cd8a8a | 1913 | "edgeintersector r E1 E2 F [Tol]",__FILE__, |
1914 | edgeintersector,g); | |
7fd59977 | 1915 | |
1916 | theCommands.Add("build3d", | |
73cd8a8a | 1917 | "build3d S [tol]", |
1918 | build3d, g); | |
7fd59977 | 1919 | |
01697018 | 1920 | theCommands.Add("reducepcurves", |
73cd8a8a | 1921 | "reducepcurves shape1 shape2 ...", |
1922 | reducepcurves, g); | |
01697018 | 1923 | |
51a849d7 | 1924 | theCommands.Add("concatC0wire", |
73cd8a8a | 1925 | "concatC0wire result wire", |
1926 | __FILE__, | |
1927 | concatC0wire, | |
1928 | g); | |
51a849d7 | 1929 | |
7fd59977 | 1930 | theCommands.Add("concatwire", |
73cd8a8a | 1931 | "concatwire result wire [option](G1/C1)", |
1932 | __FILE__, | |
1933 | concatwire, | |
1934 | g); | |
7fd59977 | 1935 | } |
1936 | ||
1937 |