0025613: Wrong distance found by xdistef command for attached shapes
1. Divide B-spline curve on sub-intervals (bounded by knots values).
2. Class BRepLib_CheckCurveOnSurface_TargetFunc has been optimized for future implementation to checkshape algorithm (Adaptors are used instead of Geom_Curve(Surface)).
3. Parallelization of new algorithm.
isk [Mon, 22 Jun 2015 12:01:37 +0000 (15:01 +0300)]
0023028: Visualization, TKOpenGl - eliminate global static variables
OpenGl_CappingAlgo - move global variables to OpenGl_Workspace class fields.
OpenGl_View::ShaderSource::Source() - drop static for local variable.
OpenGl_Window - drop redundant global constant THE_DEFAULT_BG_COLOR.
isn [Thu, 25 Jun 2015 11:47:00 +0000 (14:47 +0300)]
0026219: ShapeUpgrade_UnifySameDomain fails with StdFail_NotDone exception
Avoid merging edges if the collapsed vertex has a third connected edge.
Fix the problem when merged edges have different location.
Test case for issue CR26219
OpenGl_ShaderManager - add predefined GLSL programs for new stereo outputs.
OpenGl_Workspace::Redraw() - do not implicitly disable stereo to allow stereo dump as is.
OpenGl_Caps - add flag swapInterval to control VSync.
OpenGl_Workspace::BufferDump() - handle cases with non-applicable GL_PACK_ROW_LENGTH.
CALL_DEF_WINDOW - drop unused fields; add fields "left" and "top"
to reverse stereo pair for interlaced output depending on window position.
Draw Harness, ViewerTest:
- Extend syntax of command vstereo to setup stereo.
- Extend vdump command to allow dump of stereoscopic pair in different formats.
- Extend command vcaps with option vsync.
- Use mouse scroll to zoom and adjust ZFocus in WinAPI.
- Use "/" and "*" to adjust IOD.
v3d/glsl/stereo - add test case for stereo modes.
Cocoa_LocalPool, OSD_EnvironmentIterator - fix compilation issues on OS X Snow Leopard.
nbv [Wed, 3 Jun 2015 13:52:54 +0000 (16:52 +0300)]
0026151: Wrong result obtained by intersection algorithm.
1. Methods IntPolyh_MaillageAffinage::GetMinDeflection() and IntPolyh_MaillageAffinage::GetMaxDeflection() have been created (see cdl-file for more detail information).
2. Extended check, if starting point of WLine is a tangent point, has been implemented in IntWalk_PWalking::Perform(...) method.
abk [Tue, 19 May 2015 17:03:11 +0000 (20:03 +0300)]
0026261: Create a tool to remove tails from any wire
A tool to remove tails from the wires of a shape was created.
The tool is based on mechanism 'ShapeFix',
is located in types 'ShapeFix_Wire' and 'ShapeAnalysis_Wire',
is enabled through method 'ShapeFix_Wire::FixTailMode' and
is initialized by methods 'ShapeFix_Wire::SetMaxTailAngle' and 'ShapeFix_Wire::SetMaxTailWidth' and
is called through method 'ShapeFix_Wire::FixTails'.
The status of any performing of the last method is accessible through method 'ShapeFix_Wire::StatusFixTails'.
The tail angle is checked only at the tail start.
Mechanism 'ShapeFix' was modified:
- the tool is disabled by default;
- algorithm 'Fix notched edges' is disabled then the tool is enabled;
- the tool and the last algorithm work in turns then the tool works on the request.
'Draw' command 'fixshape' was extended by options '-maxtaila' and '-maxtailw' to test the tool.
'Draw' tests to test the tool were created.
Algorithm 'fixshape' was changed in type 'ShapeProcess_OperLibrary' to
- use new parameters named 'FixTailMode', 'MaxTailAngle' (in degrees) and 'MaxTailWidth' from the algorithm context;
- apply the tool after the shape will be fully fixed if the tool was enabled.
Place holders for the new parameters were created in the resource file of mechsnism 'STEPControl_Reader'.
abk [Fri, 22 May 2015 12:51:47 +0000 (15:51 +0300)]
0026259: Extend commands '{l|s|v}props' to output the values with the full precision
Additional option '-full' was added to 'Draw' commands 'lprops', 'sprops' and 'vprops'
to output the values not only with the short but and with the full precision.
azv [Thu, 28 May 2015 10:36:57 +0000 (13:36 +0300)]
Extract of fixes from 0024682: Move out B-spline cache from curves and surfaces to dedicated classes BSplCLib_Cache and BSplSLib_Cache
4. Precised calculation of derivatives of surface of revolution is implemented for the points of surface placed on the axis of revolution (Geom_SurfaceOfRevolution.cxx)
5. Small modifications are made to adjust algorithms to new behavior of B-spline calculation.
6. Test cases were modified according to the modern behavior.
7. Changes in BRepLib_CheckCurveOnSurface to use adaptors instead of geometric entities
9. Added methods to access directly poles, knots, multiplicities of BSpline curves and surfaces
pkv [Mon, 25 May 2015 10:08:25 +0000 (13:08 +0300)]
0026263: Inconsistent results of bopargcheck snd checkcurveonsurf commands.
Changes:
class BOPTest
- static function:
Standard_Integer checkcurveonsurf(Draw_Interpretor& di,
Standard_Integer n,
const char** a)
has been changed.
The condition that provides selection of faulty curves has been modified
to be coherent with the same condition in class BOPAlgo_Analyzer.
azn [Thu, 21 May 2015 11:46:00 +0000 (14:46 +0300)]
0025923: Remove small wires on face read from STEP
The analysis of small area in the method ShapeAnalysis_Wire::CheckSmallArea is performed the following way:
- On the fisrt step algorithm produces a rough estimation of part of surface area.
- In a case if obtained estimation is less than tolerance then evaluate real area and comapre this value with tolerance.
- New flag has been added to XSTEPResource/IGES. In a case if flag is true the faces with small 3d area is removed from ShapeFix context.
Test-case for issue #25923 and update test-cases in de group according to the new behavior.
dbp [Thu, 21 May 2015 11:30:38 +0000 (14:30 +0300)]
0026199: Visualization - use NCollection_IndexedMap instead of NCollection_Sequence in OpenGl_BVHClipPrimitiveSet to improve performance
This patch improves performance of OpenGl_BVHClipPrimitiveSet. In particular, on the attached test case for 90 000 spheres the results are the following:
So, the patch improves vdisplay in ~40 times, and vclear in ~2 times without extra memory and with no impact on rendering performance. However, the vclear time is still significant. According to profile results, it is due to Graphic3d_Structure::DisconnectAll method.
vpa [Thu, 14 May 2015 16:32:05 +0000 (19:32 +0300)]
0026209: Visualization - provide a method to fit view to the specific bounding box
Methods V3d_View::FitAll and NIS_View::FitAll3d now take arbitrary bounding box as a parameter;
Option -selected added to vfit command to fit only selected entities in Draw;
F key press now fits selected objects if any by default.
Files ISession2D_SensitiveCurve.h and ISession2D_SensitiveCurve.cpp were removed from mfc Geometry sample.
Output directory for mfcsample project was changed from lib/libd to bin/bind.
pkv [Thu, 21 May 2015 09:56:26 +0000 (12:56 +0300)]
0026224: Wrong result obtained by Common operator.
Changes:
class BOPTools_AlgoTools2D
- method:
Standard_Integer BOPTools_AlgoTools2D::AttachExistingPCurve
(const TopoDS_Edge& aE2,
const TopoDS_Edge& aE1,
const TopoDS_Face& aF,
const Handle(IntTools_Context)& aCtx)
has been changed.
The treatment of the curves that need to be reversed has been modified
taking into account reversed parameter
0026469: Methods Seek(), ChangeSeek() are missing in class NCollection_IndexedDataMap
I. New features:
1.1. class NCollection_IndexedDataMap
- method:
const TheItemType* Seek(const TheKeyType& theKey1) const
has been added.
The method Seek returns pointer to Item by Key.
Returns NULL if Key was not found.
- method:
TheItemType* ChangeSeek (const TheKeyType& theKey1)
has been added.
The method ChangeSeek returns modifiable pointer to Item by Key.
Returns NULL if Key was not found.
abv [Thu, 7 May 2015 05:53:38 +0000 (08:53 +0300)]
0026146: Visualization, Select3D_ISensitivePointSet - eliminate crash when clearing selections [only with TBB]
Remove classes Select3D_ISensitivePointSet and Select3D_BoundarySensitivePointSet; use Select3D_SensitivePoly directly for boundary selection.
Make last argument in Select3D_SensitiveFace non-default to ensure that value is always explicitly specified by the caller.
Inherit SelectMgr_FrustumBuilder from Standard_Transient to use normal Handle instead of NCollection_Handle.
vpa [Thu, 7 May 2015 15:53:21 +0000 (18:53 +0300)]
0026147: Visualization - restore the ability to pick only fully included objects in rectangular selection
2 modes of rectangular selection are available: inclusion-only and overlap-allowing;
The modes can be switched using method AllowOverlapDetection from StdSelect_ViewerSelector3d;
BVH for sensitive entities now builds if there is more than max number of leafs in collection;
Added option -allowoverlap to command vselect;
Interactive rectangular selection in Draw is now available in 2 modes:
- if the user starts selection from upper corners, only fully included objects will be selected;
- if the user starts selection from lower corners, both partially and fully overlapped objects will be selected.
vpa [Wed, 6 May 2015 12:35:36 +0000 (15:35 +0300)]
0026159: Visualization - revise tolerance implementation for selection
Max tolerance is now applied to all objects and entities by default;
if there is an entity with a lower tolerance, selecting frustum will be recalculated for it.
The ability to set sensitivity for each entity individually is moved to protected section of SelectBasics_SensitiveEntity
SetPixelTolerance from AIS_InteractiveContext now sets custom tolerance that is applied to all sensitives.
Added -unset option to vselprecision command to disable custom tolerances.
Test case for issue #26159
kgv [Wed, 6 May 2015 13:05:47 +0000 (16:05 +0300)]
0026165: Visualization, TKOpenGl - fix FBO blitting on some mobile devices
OpenGl_Texture::Init() - initialize FBO textures with GL_TEXTURE_WRAP_ set to GL_CLAMP_TO_EDGE,
since some devices do not support GL_REPEAT (which is default) in such combination.
OpenGl_Font::createTexture() - define texture parameters explicitly.
OpenGl_FrameBuffer::Init() create Depth render buffer object instead of texture
on devices which do not support GL_DEPTH24_STENCIL8.
projects / occt-copy.git / log