Procedures checkxstat, checkstatshape, checkshapeff, checkdoc were created.
Procedures checkmaxtol, checknbshapes were updated.
Test group de was refactored.
TODO statements in test cases were updated.
Test cases were updated to use new (refactored) options of check commands.
checkshape result
~~~~~
+It is possible to compare number of problem elements obtained by command *checkshape result ff*
+with reference data or/and with max possible value:
+
+Use: checkshapeff aShape [options...]
+
+Allowed options are:
+ * -wires N: reference number of problem wires
+ * -faces N: reference number of problem faces
+ * -shells N: reference number of problem shells
+ * -solids N: reference number of problem solids
+ * -max_wires N: max possible number of problem wires
+ * -max_faces N: max possible number of problem faces
+ * -max_shells N: max possible number of problem shells
+ * -max_solids N: max possible number of problem solids
+
+~~~~~
+checkshapeff results -wires 2 -faces 4
+~~~~~
+
To check the number of faults in the shape command *checkfaults* can be used.
Use: checkfaults shape source_shape [ref_value=0]
regexp { *VERTEX +: +MAX=([-0-9.+eE]+)} $tolerance dummy max_vertex
~~~~~
-It is possible to use command *checkmaxtol* to check maximal tolerance of shape and compare it with reference value.
+It is possible to use command *checkmaxtol* to check maximal and average tolerances of shape and compare them with reference value.
Use: checkmaxtol shape [options...]
Allowed options are:
- * -ref: reference value of maximum tolerance
- * -source: list of shapes to compare with
- * -min_tol: minimum tolerance for comparison
- * -multi_tol: tolerance multiplier
+ * -tol N: N is a reference value of maximum tolerance.
+ * -avg N: N is a reference value of average tolerance.
+ * -source: list of shapes to compare with, e.g.: -source {shape1 shape2 shape3} (is used only for max tolerance).
+ * -max_tol: max possible value of max tolerance.
+ * -max_avg: max possible value of average tolerance.
+ * -multi_tol: tolerance multiplier (is used only for max tolerance).
The default syntax of *checkmaxtol* command for comparison with the reference value:
~~~~~
-checkmaxtol result -ref 0.00001
+checkmaxtol result -tol 0.00001
~~~~~
There is an opportunity to compare max tolerance of resulting shape with max tolerance of source shape.
Use: checknbshapes shape [options...]
Allowed options are:
- * -vertex N
- * -edge N
- * -wire N
- * -face N
- * -shell N
- * -solid N
- * -compsolid N
- * -compound N
- * -shape N
+ * -vertex N: compare number of vertexes with reference value N
+ * -edge N: compare number of edges with reference value N
+ * -wire N: compare number of wires with reference value N
+ * -face N: compare number of faces with reference value N
+ * -shell N: compare number of shells with reference value N
+ * -solid N: compare number of solids with reference value N
+ * -compsolid N: compare number of compsolids with reference value N
+ * -compound N: compare number of compounds with reference value N
+ * -shape N: compare number of shapes with reference value N
+ * -max_vertex N: compare number of vertexes with max possible number of vertexes N
+ * -max_edge N: compare number of edges with max possible number of edges N
+ * -max_wire N: compare number of wires with max possible number of wires N
+ * -max_face N: compare number of faces with max possible number of faces N
+ * -max_shell N: compare number of shells with max possible number of shells N
+ * -max_solid N: compare number of solids with max possible number of solids N
+ * -max_compsolid N: compare number of compsolids with max possible number of compsolids N
+ * -max_compound N: compare number of compounds with max possible number of compounds N
+ * -max_shape N: compare number of shapes with max possible number of shapes N
* -t: compare the number of sub-shapes in "shape" counting
the same sub-shapes with different location as different sub-shapes.
* -m msg: print "msg" in case of error
+ * -ref [nbshapes a]: compare the number of sub-shapes in "shape" and in "a".
+ -vertex N, -edge N and other options are still working.
~~~~~
checknbshapes result -vertex 8 -edge 4
~~~~~
-@subsubsection testmanual_5_3_9 Check pixel color
+@subsubsection testmanual_5_3_9 Check statistic of shape
+
+Compare statistic of shape with given reference data.
+
+Use: checkstatshape shape [options...]
+
+ Allowed options are:
+ * -freeedge N: compare number of free edges with reference N
+ * -sharededge N: compare number of shared edges with reference N
+ * -freewire N: compare number of free wires with reference N
+ * -face N: compare number of faces with reference N
+ * -shell N: compare number of shells with reference N
+ * -solid N: compare number of solids with reference N
+ * -max_freeedge N: compare number of free edges with max possible number N
+ * -max_sharededge N: compare number of shared edges with max possible number N
+ * -max_freewire N: compare number of free wires with max possible number N
+ * -max_face N: compare number of faces with max possible number N
+ * -max_shell N: compare number of shells with max possible number N
+ * -max_solid N: compare number of solids with max possible number N
+
+~~~~~
+ReadStep Doc1 D:/D1.stp
+checkdoc Doc1 -warns 5 -faults 0
+~~~~~
+
+@subsubsection testmanual_5_3_10 Check pixel color
To check pixel color command *checkcolor* can be used.
~~~~~
checkcolor 100 100 1 0 0
~~~~~
+
+@subsubsection testmanual_5_3_11 Check OCAF document validity
+
+To check number of faults and/or warnings in output of commands 'data c' and 'tpstat c' command *checkdoc* can be used.
+
+It can be used after opening of document.
+
+Usage:
+ * checkdoc "data c" [options...]
+ * checkdoc "tpstat c" [options...]
+
+Allowed options are:
+ * -warns N: reference number of warnings
+ * -faults N: reference number of faults
+ * -max_warns N: max possible number of warnings
+ * -max_faults N: max possible number of faults
+
+~~~~~
+ReadStep Doc1 D:/D1.stp
+checkdoc "data c" -warns 5 -faults 0
+checkdoc "tpstat c" -warns 0 -max_faults 1
+~~~~~
+
+@subsubsection testmanual_5_3_12 Check statistic of OCAF document
+
+Compare statistic of layers in document with given reference data.
+
+Use: checkxstat Doc [options...]
+
+Allowed options are:
+ * -n0 N: compare number of level N0 layers in document Doc with reference value
+ * -n1 N: compare number of level N1 layers in document Doc with reference value
+ * -n2 N: compare number of level N2 layers in document Doc with reference value
+ * -total N: compare number of layers in document Doc with reference value
+ * -withname N: compare number of layers with name in document Doc with reference value
+ * -withcolor N: compare number of layers with color link in document Doc with reference value
+ * -withlayer N: compare number of layers with layer link in document Doc with reference value
+ * -centroid N: compare number of Centroid Props in document Doc with reference value
+ * -volume N: compare number of Volume Props in document Doc with reference value
+ * -area N: compare number of Area Props in document Doc with reference value
+ * -nbcolors N: compare number of colors in document Doc with reference value
+ * -colors N: compare colors of layers in document Doc with reference value
+ * -nblayers N: compare number of layers in document Doc with reference value
+ * -layers N: compare number of layers in document Doc with reference value
+
+All options are independent and can be used in any order.
+
+~~~~~
+ReadStep Doc1 D:/D1.stp
+checkdoc Doc1 -n0 5 -n1 4 -n2 0 -colors 3
+~~~~~
\ No newline at end of file
upvar arg arg
upvar narg narg
upvar args args
- if { $arg == ${check_name} } {
+ if { ${arg} == ${check_name} } {
if {${get_value}} {
incr narg
- if { $narg < [llength $args] && ! [regexp {^-} [lindex $args $narg]] } {
- set ${check_result} "[lindex $args $narg]"
+ if { ${narg} < [llength ${args}] && ! [regexp {^-} [lindex ${args} ${narg}]] } {
+ set ${check_result} "[lindex ${args} ${narg}]"
} else {
error "Option ${check_result} requires argument"
}
the same sub-shapes with different location as different sub-shapes.
-m msg: print "msg" in case of error
-ref [nbshapes a]: compare the number of sub-shapes in "shape" and in "a".
- -vertex N, -edge N and other options are stil working.
+ -vertex N, -edge N and other options are still working.
+ -max_vertex N: compare number of vertexes with max possible number of vertexes N
+ -max_edge N: compare number of edges with max possible number of edges N
+ -max_wire N: compare number of wires with max possible number of wires N
+ -max_face N: compare number of faces with max possible number of faces N
+ -max_shell N: compare number of shells with max possible number of shells N
+ -max_solid N: compare number of solids with max possible number of solids N
+ -max_compsolid N: compare number of compsolids with max possible number of compsolids N
+ -max_compound N: compare number of compounds with max possible number of compounds N
+ -max_shape N: compare number of shapes with max possible number of shapes N
}
proc checknbshapes {shape args} {
puts "checknbshapes ${shape} ${args}"
set count_locations 0
set ref_info ""
- for {set narg 0} {$narg < [llength $args]} {incr narg} {
- set arg [lindex $args $narg]
- if {[_check_arg "-vertex" nbVERTEX 1] ||
- [_check_arg "-edge" nbEDGE 1] ||
- [_check_arg "-wire" nbWIRE 1] ||
- [_check_arg "-face" nbFACE 1] ||
- [_check_arg "-shell" nbSHELL 1] ||
- [_check_arg "-solid" nbSOLID 1] ||
- [_check_arg "-compsolid" nbCOMPSOLID 1] ||
- [_check_arg "-compound" nbCOMPOUND 1] ||
- [_check_arg "-shape" nbSHAPE 1] ||
- [_check_arg "-t" count_locations] ||
- [_check_arg "-m" message 1] ||
- [_check_arg "-ref" ref_info 1]
- } {
- continue
- }
- # unsupported option
- if { [regexp {^-} $arg] } {
- error "Error: unsupported option \"$arg\""
- }
- error "Error: cannot interpret argument $narg ($arg)"
- }
+ set options {{"-vertex" nbVERTEX 1}
+ {"-edge" nbEDGE 1}
+ {"-wire" nbWIRE 1}
+ {"-face" nbFACE 1}
+ {"-shell" nbSHELL 1}
+ {"-solid" nbSOLID 1}
+ {"-compsolid" nbCOMPSOLID 1}
+ {"-compound" nbCOMPOUND 1}
+ {"-shape" nbSHAPE 1}
+ {"-max_vertex" max_nbVERTEX 1}
+ {"-max_edge" max_nbEDGE 1}
+ {"-max_wire" max_nbWIRE 1}
+ {"-max_face" max_nbFACE 1}
+ {"-max_shell" max_nbSHELL 1}
+ {"-max_solid" max_nbSOLID 1}
+ {"-max_compsolid" max_nbCOMPSOLID 1}
+ {"-max_compound" max_nbCOMPOUND 1}
+ {"-max_shape" max_nbSHAPE 1}
+ {"-t" count_locations}
+ {"-de_iges" isDeIges 1}
+ {"-not_de_iges" isNotDeIges 1}
+ {"-m" message 1}
+ {"-ref" ref_info 1}}
+
+ _check_args ${args} ${options} "checknbshapes"
if { ${count_locations} == 0 } {
set nb_info [nbshapes ${shape}]
set EntityList {VERTEX EDGE WIRE FACE SHELL SOLID COMPSOLID COMPOUND SHAPE}
+ set nbshapes_res [dict create]
foreach Entity ${EntityList} {
set expr_string "${Entity} +: +(\[-0-9.+eE\]+)"
set to_compare {}
# get number of elements from ${shape}
if { [regexp "${expr_string}" ${nb_info} full nb_entity2] } {
+ dict append nbshapes_res ${Entity} ${nb_entity2}
lappend to_compare ${nb_entity2}
} else {
error "Error : command \"nbshapes ${shape}\" gives an empty result"
if { [regexp "${expr_string}" ${ref_info} full nb_entity_ref] } {
lappend to_compare ${nb_entity_ref}
}
+ # compare current number of elements with max possible number of elements
+ # received from -max_vertex, -max_edge, ... options
+ _comparewithmax nb_entity2 max_nb${Entity} "NBSHAPES" 0 "Compare number of ${Entity} in command nbshapes with max possible number"
# skip comparing if no reference data was given
if {[llength $to_compare] == 1} {
continue
puts "OK : ${message} is GOOD because number of ${Entity} entities is equal to number of expected ${Entity} entities"
}
}
+
+ if {[info exists isNotDeIges]} {
+ set shapes_cur [dict get ${nbshapes_res} "SHAPE"]
+ _comparewithmax isNotDeIges shapes_cur "NBSHAPES" 0 "Compare number of ${Entity} in command nbshapes with max possible number for DE test without iges shape"
+ } elseif {[info exists isDeIges]} {
+ set shapes_cur [dict get ${nbshapes_res} "SHAPE"]
+ set comp_cur [dict get ${nbshapes_res} "COMPOUND"]
+ set shape_comp_cur [expr ${shapes_cur} - ${comp_cur}]
+ _comparewithmax isDeIges shape_comp_cur "NBSHAPES" 0 "Compare number of ${Entity} in command nbshapes with max possible number for DE test with iges shape"
+ }
}
# Procedure to check equality of two reals with tolerance (relative and absolute)
set tol -0.01
set type "closed"
- for {set narg 0} {$narg < [llength $args]} {incr narg} {
- set arg [lindex $args $narg]
- if {[_check_arg "-tol" tol 1] ||
- [_check_arg "-type" type 1]
- } {
- continue
- }
- # unsupported option
- if { [regexp {^-} $arg] } {
- error "Error: unsupported option \"$arg\""
- }
- error "Error: cannot interpret argument $narg ($arg)"
- }
+ set options {{"-tol" tol 1}
+ {"-type" type 1}}
+
+ _check_args ${args} ${options} "checkfreebounds"
if {"$type" != "closed" && "$type" != "opened"} {
error "Error : wrong -type key \"${type}\""
}
help checkmaxtol {
- Compare max tolerance of shape with reference value.
+ Compare max and/or average tolerances of shape with reference values.
Command returns max tolerance of the shape.
Use: checkmaxtol shape [options...]
Allowed options are:
- -ref: reference value of maximum tolerance.
- -source: list of shapes to compare with, e.g.: -source {shape1 shape2 shape3}
- -min_tol: minimum tolerance for comparison.
- -multi_tol: tolerance multiplier.
+ -tol: reference value of maximum tolerance.
+ -avg: reference value of average tolerance.
+ -source: list of shapes to compare with, e.g.: -source {shape1 shape2 shape3} (is used only for max tolerance).
+ -max_tol: max possible value of max tolerance.
+ -max_avg: max possible value of average tolerance.
+ -multi_tol: tolerance multiplier (is used only for max tolerance).
}
-
proc checkmaxtol {shape args} {
puts "checkmaxtol ${shape} ${args}"
upvar ${shape} ${shape}
- set ref_value ""
+ set ref_tol 0
+ set ref_avg 0
set source_shapes {}
- set min_tol 0
+ set check_max_tol -1
+ set check_max_avg -1
set tol_multiplier 0
- # check arguments
- for {set narg 0} {$narg < [llength $args]} {incr narg} {
- set arg [lindex $args $narg]
- if {[_check_arg "-min_tol" min_tol 1] ||
- [_check_arg "-multi_tol" tol_multiplier 1] ||
- [_check_arg "-source" source_shapes 1] ||
- [_check_arg "-ref" ref_value 1]
- } {
- continue
- }
- # unsupported option
- if { [regexp {^-} $arg] } {
- error "Error: unsupported option \"$arg\""
- }
- error "Error: cannot interpret argument $narg ($arg)"
- }
+ set options {{"-max_tol" check_max_tol 1}
+ {"-max_avg" check_max_avg 1}
+ {"-multi_tol" tol_multiplier 1}
+ {"-source" source_shapes 1}
+ {"-tol" ref_tol 1}
+ {"-avg" ref_avg 1}}
+
+ _check_args ${args} ${options} "checkmaxtol"
# get max tol of shape
set max_tol 0
- if {[regexp "Tolerance MAX=(\[-0-9.+eE\]+)" [tolerance ${shape}] full maxtol_temp]} {
- set max_tol ${maxtol_temp}
- } else {
+ set avg_tol 0
+ if { ![regexp {Tolerance +MAX=([-0-9.+eE]+) +AVG=([-0-9.+eE]+)} [tolerance ${shape}] full max_tol avg_tol] } {
error "Error: cannot get tolerances of shape \"${shape}\""
}
foreach source_shape ${source_shapes} {
upvar ${source_shape} ${source_shape}
set _src_max_tol [checkmaxtol ${source_shape}]
- if { [expr ${_src_max_tol} > ${min_tol} ] } {
- set min_tol ${_src_max_tol}
+ if { [expr ${_src_max_tol} > ${check_max_tol} ] } {
+ set check_max_tol ${_src_max_tol}
}
}
# apply -multi_tol option
if {${tol_multiplier}} {
- set min_tol [expr ${tol_multiplier} * ${_src_max_tol}]
+ set check_max_tol [expr ${tol_multiplier} * ${check_max_tol}]
}
# compare max tol of source shapes with checking tolerance
- if { ${min_tol} && [expr ${max_tol} > ${min_tol}] } {
- puts "Error: tolerance of \"${shape}\" (${max_tol}) is greater than checking tolerance (${min_tol})"
+ if { ${ref_tol} && [expr ${max_tol} > ${ref_tol}] } {
+ if {([format %.7f [expr 1.*abs($max_tol - $ref_tol)]] > [format %.7f [expr 0.01 * $ref_tol]] && [format %.7f [expr 1. * ($max_tol - $ref_tol)]] > 0.0001) || ($max_tol == 0 && $ref_tol > 0)} {
+ puts "Error: Max tolerance of ${shape} (${max_tol}) is greater than reference tolerance (${ref_tol})"
+ }
}
- if { ${ref_value} != "" } {
- checkreal "Max tolerance" ${max_tol} ${ref_value} 0.0001 0.01
+ # compare avg tol with checking tolerance
+ if { ${ref_avg} && [expr ${avg_tol} > ${ref_avg}] } {
+ if {([format %.7f [expr 1.*abs($avg_tol - $ref_avg)]] > [format %.7f [expr 0.01 * $ref_avg]] && [format %.7f [expr 1. * ($avg_tol - $ref_avg)]] > 0.0001) || ($avg_tol == 0 && $ref_avg > 0)} {
+ puts "Error: Avg tolerance of ${shape} (${avg_tol}) is greater than reference tolerance (${ref_avg})"
+ }
+ }
+ # compare max tol with checking max tolerance
+ if { ${check_max_tol} != -1 } {
+ if {([format %.7f [expr 1.*($max_tol - $check_max_tol)]] > [format %.7f [expr 0.0001 * $check_max_tol]] && [format %.7f [expr 1. * abs($check_max_tol-$max_tol)]] > 0.0000001) || ($max_tol == 0 && $check_max_tol > 0)} {
+ puts "TOLERANCE : Faulty. Max tolerance of ${shape} (${max_tol}) is greater than max possible checking tolerance (${check_max_tol})"
+ }
+ }
+ # compare avg tol with checking avg tolerance
+ if { ${check_max_avg} != -1 } {
+ if {([format %.7f [expr 1.*($avg_tol - $check_max_avg)]] > [format %.7f [expr 0.0001 * $check_max_avg]] && [format %.7f [expr 1. * abs($check_max_avg-$avg_tol)]] > 0.0000001) || ($avg_tol == 0 && $check_max_avg > 0)} {
+ puts "TOLERANCE : Faulty. Avg tolerance of ${shape} (${max_tol}) is greater than max possible checking tolerance (${check_max_avg})"
+ }
}
return ${max_tol}
}
puts "Error : Number of faults is $nb_r"
}
}
+
+help ReadFileToDoc {
+ Procedure to open data file as document.
+ Uses 'locate_data_file' procedure to search the data file.
+ Supported formats:
+ - *.iges (*.igs)
+ - *.stp (*.step)
+ The search order is:
+ - subdirectory "data" of the test script (grid) folder
+ - subdirectories in environment variable CSF_TestDataPath
+ - subdirectory set by datadir command
+ If file is not found, raises Tcl error.
+
+ Use: ReadFileToDoc filename [options...]
+ Allowed options are:
+ -doc D_First: variable to save opened as document data file (default document name - 'D_First').
+ -productmode [0/1]: turn OFF/ON read.step.product.mode
+}
+proc ReadFileToDoc { filename args } {
+ puts "ReadFileToDoc ${filename} ${args}"
+
+ set DocName "D_First"
+ set ProductMode ""
+
+ set options {{"-doc" DocName 1}
+ {"-productmode" ProductMode 1}}
+
+ _check_args ${args} ${options} "ReadFileToDoc"
+
+ upvar ${DocName} ${DocName}
+ switch -exact [file extension ${filename}] {
+ ".igs" -
+ ".iges" { set ReadCommand ReadIges }
+ ".step" -
+ ".stp" { set ReadCommand ReadStep }
+ }
+ switch -exact ${ProductMode} {
+ "0" { param read.step.product.mode OFF; puts "param read.step.product.mode OFF" }
+ "1" { param read.step.product.mode ON; puts "param read.step.product.mode ON" }
+ }
+ set path_file [locate_data_file ${filename}]
+ if { [catch { ${ReadCommand} ${DocName} ${path_file} }] } {
+ puts "Error: file ${filename} was not read (exception)"
+ } else {
+ puts "File '${filename}' was read into '${DocName}' document"
+ }
+}
+
+help ReOpenDoc {
+ Procedure to save document to the data file, close the document and reopen it.
+
+ Supported formats:
+ - *.iges (*.igs)
+ - *.stp (*.step)
+
+ Use: ReOpenDoc filename [options...]
+ Allowed options are:
+ -doc D_First: original document to reopen (default document name - 'D_First').
+ -newdoc D_Second: name of new document (default document name - 'D_Second').
+}
+proc ReOpenDoc { filename args } {
+ puts "ReOpenDoc ${filename} ${args}"
+
+ upvar imagedir imagedir
+ upvar casename casename
+
+ set DocName "D_First"
+ set NewDocName "D_Second"
+
+ set options {{"-doc" DocName 1}
+ {"-newdoc" NewDocName 1}}
+
+ upvar ${DocName} ${DocName}
+ upvar ${NewDocName} ${NewDocName}
+
+ _check_args ${args} ${options} "ReOpenDoc"
+
+ set ext [file extension ${filename}]
+ switch -exact ${ext} {
+ ".igs" -
+ ".iges" { set ReadCommand ReadIges; set WriteCommand WriteIges }
+ ".step" -
+ ".stp" { set ReadCommand ReadStep; set WriteCommand WriteStep }
+ }
+ file delete ${imagedir}/${casename}_D_First${ext}
+ if {[catch { ${WriteCommand} ${DocName} ${imagedir}/${casename}_${DocName}${ext}}]} {
+ puts "Error: First - file was not written - exception"
+ } else {
+ if {[catch { ${ReadCommand} ${NewDocName} ${imagedir}/${casename}_${DocName}${ext}}]} {
+ puts "Error: Second - file was not read - exception"
+ }
+ }
+ catch {[file delete ${imagedir}/${casename}_${DocName}${ext}]}
+
+ # Close the document
+ if { [catch { Close ${DocName} }] } {
+ puts "Error : cannot close a document ${DocName} - exception"
+ }
+}
+
+# auxiliary: check all arguments
+proc _check_args { args {options {}} {command_name ""}} {
+ # check arguments
+ for {set narg 0} {${narg} < [llength ${args}]} {incr narg} {
+ set arg [lindex ${args} ${narg}]
+ set toContinue 0
+ foreach option ${options} {
+ set option_name [lindex ${option} 0]
+ set variable_to_save_value [lindex ${option} 1]
+ set get_value [lindex ${option} 2]
+ if {${get_value} == ""} { set get_value 0 }
+ set local_value ""
+ if { [_check_arg ${option_name} local_value ${get_value}] } {
+ upvar ${variable_to_save_value} ${variable_to_save_value}
+ set ${variable_to_save_value} ${local_value}
+ set toContinue 1
+ }
+ }
+ if {${toContinue}} { continue }
+ # unsupported option
+ if { [regexp {^-} ${arg}] } {
+ error "Error: unsupported option \"${arg}\""
+ }
+ error "Error: cannot interpret argument ${narg} (${arg})"
+ }
+ foreach option ${options} {
+ set option_name [lindex ${option} 0]
+ set variable_to_save_value [lindex ${option} 1]
+ set should_exist [lindex ${option} 3]
+ if {![info exists ${variable_to_save_value}] && ${should_exist} == 1} {
+ error "Error: wrong using of command '${command_name}', '${option_name}' option is required"
+ }
+ }
+}
+
+help checkdoc {
+ Compare number of faults and/or warnings in output of commands 'data c' and 'tpstat c'
+ with reference values and/or with max possible values.
+ Should be used after opening of some document.
+ Use: checkdoc "data c" [options...]
+ or
+ checkdoc "tpstat c" [options...]
+ Allowed options are:
+ -warns N: reference number of warnings
+ -faults N: reference number of faults
+ -max_warns N: max possible number of warnings
+ -max_faults N: max possible number of faults
+}
+proc checkdoc {command args} {
+ puts "checkdoc ${command} ${args}"
+
+ set options {{"-warns" ref_warns 1}
+ {"-faults" ref_faults 1}
+ {"-max_warns" max_warns 1}
+ {"-max_faults" max_faults 1}}
+
+ _check_args ${args} ${options} "checkdoc"
+
+ switch -exact ${command} {
+ "data c" {set info [data c]; set errorMsg "DATA"}
+ "tpstat c" {set info [tpstat c]; set errorMsg "TPSTAT"}
+ }
+
+ if { [llength ${info}] } {
+ set warns 0
+ set faults 0
+ foreach line [split ${info} "\n"] {
+ if {[regexp {[\t ]+([-0-9.+eE]+)[\t ]+([FW]):} $line full number type]} {
+ switch -exact ${type} {
+ "F" {incr faults ${number}}
+ "W" {incr warns ${number}}
+ }
+ }
+ }
+
+ _comparewithmax warns ref_warns ${errorMsg} 1 "ref number of warnings in command ${command}"
+ _comparewithmax faults ref_faults ${errorMsg} 1 "ref number of faults in command ${command}"
+
+ _comparewithmax warns max_warns ${errorMsg} 0 "comparison ref number of warns in command ${command} with max possible"
+ _comparewithmax faults max_faults ${errorMsg} 0 "comparison ref number of faults in command ${command} with max possible"
+ } else {
+ puts "Warning: ${command} checking was NOT provided"
+ }
+}
+
+# auxiliary: puts Error status if value is bigger that maxvalue (if isEqual == 0)
+# puts Error status if values are not equal (if isEqual == 1)
+proc _comparewithmax {value maxvalue msg {isEqual 0} {description ""}} {
+ upvar ${value} ${value}
+ upvar ${maxvalue} ${maxvalue}
+
+ set sign ">"
+ if { ${isEqual} == 1 } {
+ set sign "!="
+ }
+
+ if {[info exists ${value}] &&[info exists ${maxvalue}]} {
+ if { [expr [set ${value}] ${sign} [set ${maxvalue}]]} {
+ puts "${msg} : Faulty ${description}"
+ } else {
+ puts "${msg} : OK ${description}"
+ }
+ }
+}
+
+# auxiliary: puts Error status if value is bigger that maxvalue
+proc _comparelists {value expected {msg "compare lists"} {description ""}} {
+ upvar ${value} ${value}
+ upvar ${expected} ${expected}
+ if {[info exists ${value}] && [info exists ${expected}]} {
+ if {[lsort [set ${value}]] != [lsort [set ${expected}]]} {
+ puts "${msg} : Faulty ${description}"
+ } else {
+ puts "${msg} : OK ${description}"
+ }
+ }
+}
+
+help checkshapeff {
+ Compare number of problem elements obtained by command 'checkshape aShape ff'
+ with reference one or/and with max possible number of problem elements.
+ Use: checkshapeff aShape [options...]
+ Allowed options are:
+ -wires N: reference number of problem wires
+ -faces N: reference number of problem faces
+ -shells N: reference number of problem shells
+ -solids N: reference number of problem solids
+ -max_wires N: max number of possible problem wires
+ -max_faces N: max number of possible problem faces
+ -max_shells N: max number of possible problem shells
+ -max_solids N: max number of possible problem solids
+}
+proc checkshapeff { shape args} {
+ puts "checkshapeff ${shape} ${args}"
+ upvar ${shape} ${shape}
+
+ set options {{"-wires" ref_wires 1}
+ {"-faces" ref_faces 1}
+ {"-shells" ref_shells 1}
+ {"-solids" ref_solids 1}
+ {"-max_wires" max_wires 1}
+ {"-max_faces" max_faces 1}
+ {"-max_shells" max_shells 1}
+ {"-max_solids" max_solids 1}}
+
+ _check_args ${args} ${options} "checkshapeff"
+
+ set info [checkshape ${shape} ff]
+ if { [llength ${info}] } {
+ set cur_wires 0
+ set cur_faces 0
+ set cur_shells 0
+ set cur_solids 0
+
+ regexp {WIRE\t+: +([-0-9.+eE]+).+} $info full cur_wires
+ regexp {FACE\t+: +([-0-9.+eE]+).+} $info full cur_faces
+ regexp {SHELL\t+: +([-0-9.+eE]+).+} $info full cur_shells
+ regexp {SOLID\t+: +([-0-9.+eE]+).+} $info full cur_solids
+
+ set errorMsg "CHECKSHAPE"
+ _comparewithmax cur_wires ref_wires ${errorMsg} 1 "ref number of wires in command checkshape ff"
+ _comparewithmax cur_faces ref_faces ${errorMsg} 1 "ref number of faces in command checkshape ff"
+ _comparewithmax cur_shells ref_shells ${errorMsg} 1 "ref number of shells in command checkshape ff"
+ _comparewithmax cur_solids ref_solids ${errorMsg} 1 "ref number of solids in command checkshape ff"
+
+ _comparewithmax cur_wires max_wires ${errorMsg} 0 "ref number of wires in command checkshape ff with max possible number"
+ _comparewithmax cur_faces max_faces ${errorMsg} 0 "ref number of faces in command checkshape ff with max possible number"
+ _comparewithmax cur_shells max_shells ${errorMsg} 0 "ref number of shells in command checkshape ff with max possible number"
+ _comparewithmax cur_solids max_solids ${errorMsg} 0 "ref number of solids in command checkshape ff with max possible number"
+ } else {
+ puts "Warning: checkshape ff checking was NOT provided"
+ }
+}
+
+help checkstatshape {
+ Compare output of command statshape with given reference data
+
+ Use: checkstatshape shape [options...]
+ Allowed options are:
+ -freeedge N: compare number of free edges with reference N
+ -sharededge N: compare number of shared edges with reference N
+ -freewire N: compare number of free wires with reference N
+ -face N: compare number of faces with reference N
+ -shell N: compare number of shells with reference N
+ -solid N: compare number of solids with reference N
+
+ -max_freeedge N: compare number of free edges with max possible number
+ -max_sharededge N: compare number of shared edges with max possible number
+ -max_freewire N: compare number of free wires with max possible number
+ -max_face N: compare number of faces with max possible number
+ -max_shell N: compare number of shells with max possible number
+ -max_solid N: compare number of solids with max possible number
+}
+proc checkstatshape {shape args} {
+ puts "checkstatshape ${shape} ${args}"
+ upvar ${shape} ${shape}
+
+ set ref_FreeEDGE -1
+ set ref_SharedEDGE -1
+ set ref_FreeWIRE -1
+ set ref_FACE -1
+ set ref_SHELL -1
+ set ref_SOLID -1
+
+ set options {{"-freeedge" ref_FreeEDGE 1}
+ {"-sharededge" ref_SharedEDGE 1}
+ {"-freewire" ref_FreeWIRE 1}
+ {"-face" ref_FACE 1}
+ {"-shell" ref_SHELL 1}
+ {"-solid" ref_SOLID 1}
+ {"-max_freeedge" max_FreeEDGE 1}
+ {"-max_sharededge" max_SharedEDGE 1}
+ {"-max_freewire" max_FreeWIRE 1}
+ {"-max_face" max_FACE 1}
+ {"-max_shell" max_SHELL 1}
+ {"-max_solid" max_SOLID 1}}
+
+ _check_args ${args} ${options} "checkstatshape"
+
+ set info [statshape ${shape}]
+
+ # Solid Shell Face FreeWire FreeEdge SharedEdge
+ if { [llength ${info}] } {
+ set cur_FreeEDGE 0
+ set cur_SharedEDGE 0
+ set cur_FreeWIRE 0
+ set cur_FACE 0
+ set cur_SHELL 0
+ set cur_SOLID 0
+
+ regexp {([-0-9.+eE]+)\t+ +EDGE \(Free\)} $info full cur_FreeEDGE
+ regexp {([-0-9.+eE]+)\t+ +EDGE \(Shared\)} $info full cur_SharedEDGE
+ regexp {([-0-9.+eE]+)\t+ +WIRE \(Free\)} $info full cur_FreeWIRE
+ regexp {([-0-9.+eE]+)\t+ +FACE} $info full cur_FACE
+ regexp {([-0-9.+eE]+)\t+ +SHELL} $info full cur_SHELL
+ regexp {([-0-9.+eE]+)\t+ +SOLID} $info full cur_SOLID
+
+ set errorMsg "STATSHAPE"
+ _comparewithmax cur_FreeEDGE ref_FreeEDGE ${errorMsg} 1 "ref number of free edges in command statshape"
+ _comparewithmax cur_SharedEDGE ref_SharedEDGE ${errorMsg} 1 "ref number of shared edges in command statshape"
+ _comparewithmax cur_FreeWIRE ref_FreeWIRE ${errorMsg} 1 "ref number of free wires in command statshape"
+ _comparewithmax cur_FACE ref_FACE ${errorMsg} 1 "ref number of faces in command statshape"
+ _comparewithmax cur_SHELL ref_SHELL ${errorMsg} 1 "ref number of shells in command statshape"
+ _comparewithmax cur_SOLID ref_SOLID ${errorMsg} 1 "ref number of solids in command statshape"
+
+ _comparewithmax cur_FreeEDGE max_FreeEDGE ${errorMsg} 0 "ref number of free edges in command statshape with max possible number"
+ _comparewithmax cur_SharedEDGE max_SharedEDGE ${errorMsg} 0 "ref number of shared edges in command statshape with max possible number"
+ _comparewithmax cur_FreeWIRE max_FreeWIRE ${errorMsg} 0 "ref number of free wires in command statshape with max possible number"
+ _comparewithmax cur_FACE max_FACE ${errorMsg} 0 "ref number of faces in command statshape with max possible number"
+ _comparewithmax cur_SHELL max_SHELL ${errorMsg} 0 "ref number of shells in command statshape with max possible number"
+ _comparewithmax cur_SOLID max_SOLID ${errorMsg} 0 "ref number of solids in command statshape with max possible number"
+ } else {
+ puts "Warning: statshape checking was NOT provided"
+ }
+}
+
+help checkxstat {
+ Compare output of command 'XStat docname' with given reference data
+
+ Use: checkxstat docname [options...]
+ Allowed options are:
+ -n0 N: compare number of level N0 layers in command 'XStat ${docname}' with reference value
+ -n1 N: compare number of level N1 layers in command 'XStat ${docname}' with reference value
+ -n2 N: compare number of level N2 layers in command 'XStat ${docname}' with reference value
+ -total N: compare number of layers in command 'XStat ${docname}' with reference value
+ -withname N: compare number of layers with name in command 'XStat ${docname}' with reference value
+ -withcolor N: compare number of layers with color link in command 'XStat ${docname}' with reference value
+ -withlayer N: compare number of layers with layer link in command 'XStat ${docname}' with reference value
+ -centroid N: compare number of Centroid Props in command 'XStat ${docname}' with reference value
+ -volume N: compare number of Volume Props in command 'XStat ${docname}' with reference value
+ -area N: compare number of Area Props in command 'XStat ${docname}' with reference value
+ -nbcolors N: compare number of colors in command 'XStat ${docname}' with reference value
+ -colors N: compare colors of layers in command 'XStat ${docname}' with reference value
+ -nblayers N: compare number of layers in command 'XStat ${docname}' with reference value
+ -layers N: compare number of layers in command 'XStat ${docname}' with reference value
+ All options are independent and can be used in any order.
+}
+proc checkxstat { docname args } {
+ puts "checkstatshape ${docname} ${args}"
+
+ upvar ${docname} ${docname}
+
+ set options {{"-n0" ref_n0 1}
+ {"-n1" ref_n1 1}
+ {"-n2" ref_n2 1}
+ {"-total" ref_total 1}
+ {"-withname" ref_withname 1}
+ {"-withcolor" ref_withcolor 1}
+ {"-withlayer" ref_withlayer 1}
+ {"-centroid" ref_centroid 1}
+ {"-volume" ref_volume 1}
+ {"-area" ref_area 1}
+ {"-nbcolors" ref_nbcolors 1}
+ {"-colors" ref_colors 1}
+ {"-nblayers" ref_nblayers 1}
+ {"-layers" ref_layers 1}}
+
+ _check_args ${args} ${options} "checkxstat"
+
+ set info [ XStat ${docname} ]
+
+ if { [llength ${info}] > 0 } {
+ regexp {level +N +0 +: +([-0-9.+eE]+)} ${info} full n0
+ regexp {level +N +1 +: +([-0-9.+eE]+)} ${info} full n1
+ regexp {level +N +2 +: +([-0-9.+eE]+)} ${info} full n2
+ regexp {Total +number +of +labels +for +shapes +in +the +document += +([-0-9.+eE]+)} ${info} full total
+ regexp {Number +of +labels +with +name += +([-0-9.+eE]+)} ${info} full withname
+ regexp {Number +of +labels +with +color +link += +([-0-9.+eE]+)} ${info} full withcolor
+ regexp {Number +of +labels +with +layer +link += +([-0-9.+eE]+)} ${info} full withlayer
+
+ regexp {Number +of +Centroid Props += +([-0-9.+eE]+)} ${info} full centroid
+ regexp {Number +of +Volume Props += +([-0-9.+eE]+)} ${info} full volume
+ regexp {Number +of +Area Props += +([-0-9.+eE]+)} ${info} full area
+
+ regexp {Number +of +colors += +([-0-9.+eE]+)} ${info} full nbcolors
+ regexp {Number +of +colors += +[-0-9.+eE]+\n([^\n]*)} ${info} full colors
+
+ regexp {Number +of +layers += +([-0-9.+eE]+)} ${info} full nblayers
+ regexp {Number +of +layers += +[-0-9.+eE]+\n([^\n]*)} ${info} full layers
+
+ # compare with ref values
+ _comparewithmax n0 ref_n0 "LABELS" 1 "ref number of level N0 layers in command 'XStat ${docname}'"
+ _comparewithmax n1 ref_n1 "LABELS" 1 "ref number of level N1 layers in command 'XStat ${docname}'"
+ _comparewithmax n2 ref_n2 "LABELS" 1 "ref number of level N2 layers in command 'XStat ${docname}'"
+ _comparewithmax total ref_total "LABELS" 1 "ref number of layers in command 'XStat ${docname}'"
+ _comparewithmax withname ref_withname "LABELS" 1 "ref number of layers with name in command 'XStat ${docname}'"
+ _comparewithmax withcolor ref_withcolor "LABELS" 1 "ref number of layers with color link in command 'XStat ${docname}'"
+ _comparewithmax withlayer ref_withlayer "LABELS" 1 "ref number of layers with layer link in command 'XStat ${docname}'"
+
+ _comparewithmax centroid ref_centroid "PROPS" 1 "ref number of Centroid Props in command 'XStat ${docname}'"
+ _comparewithmax volume ref_volume "PROPS" 1 "ref number of Volume Props in command 'XStat ${docname}'"
+ _comparewithmax area ref_area "PROPS" 1 "ref number of Area Props in command 'XStat ${docname}'"
+
+ _comparewithmax nbcolors ref_nbcolors "NCOLORS" 1 "ref number of colors in command 'XStat ${docname}'"
+ _comparelists colors ref_colors "COLORS" "ref colors of layers in command 'XStat ${docname}'"
+
+ _comparewithmax nblayers ref_nblayers "NLAYERS" 1 "ref number of layers in command 'XStat ${docname}'"
+ _comparelists layers ref_layers "LAYERS" "ref number of layers in command 'XStat ${docname}'"
+ } else {
+ puts " DECAF information was NOT provided by command 'XStat ${docname}'"
+ }
+}
puts "Shading problem may be, nb tri & nod"
}
-checkmaxtol result -ref 0.92213088179312575
+checkmaxtol result -tol 0.92213088179312575
checknbshapes result -shell 1
checkfreebounds result 265
checkshape a
sewing result 1.e-7 a
-checkmaxtol result -ref 0.001
+checkmaxtol result -tol 0.001
checknbshapes result -shell 1
checkfreebounds result 2
# checkshape res
-checkmaxtol result -ref 1.56901e+001
+checkmaxtol result -tol 1.56901e+001
checknbshapes result -shell 2
checkfreebounds result 115
puts "Faulty ${BugNumber} : function Sewing works wrongly"
}
-checkmaxtol result -ref 4.5583792019775401e-006
+checkmaxtol result -tol 4.5583792019775401e-006
checknbshapes result -shell 1
checkfreebounds result 28
checkshape result f
}
-checkmaxtol result -ref 0.99057887669774025
+checkmaxtol result -tol 0.99057887669774025
checknbshapes result -shell 1
checkfreebounds result 13
checkshape result f
-checkmaxtol result -ref 1.0000280013370991e-005
+checkmaxtol result -tol 1.0000280013370991e-005
checknbshapes result -shell 1
checkfreebounds result 456
set nb_compound_good 1
set nb_shape_good 6
-checkmaxtol result -ref 0.0050001000000007819
+checkmaxtol result -tol 0.0050001000000007819
checknbshapes result -shell 0
checkfreebounds result 0
SHAPE : 1762
"
checknbshapes result -ref ${nbshapes_expected} -t -m "sewing result"
-checkmaxtol result -ref 0.066338232054955981
+checkmaxtol result -tol 0.066338232054955981
checkfreebounds result 12
set square 1.88469e+07
set nb_compound_good 1
set nb_shape_good 1759
-checkmaxtol result -ref 0.066338232054955981
+checkmaxtol result -tol 0.066338232054955981
checknbshapes result -shell 2
checkfreebounds result 6
set nb_compound_good 1
set nb_shape_good 2871
-checkmaxtol result -ref 0.0451323239933289
+checkmaxtol result -tol 0.0451323239933289
checknbshapes result -shell 22
checkfreebounds result 1031
set nb_compound_good 1
set nb_shape_good 2737
-checkmaxtol result -ref 0.046734236640099257
+checkmaxtol result -tol 0.046734236640099257
checknbshapes result -shell 18
checkfreebounds result 926
set nb_compound_good 1
set nb_shape_good 3476
-checkmaxtol result -ref 0.0451323239933289
+checkmaxtol result -tol 0.0451323239933289
checknbshapes result -shell 0
checkfreebounds result 1469
set nb_compound_good 1
set nb_shape_good 2737
-checkmaxtol result -ref 0.046734236640099257
+checkmaxtol result -tol 0.046734236640099257
checknbshapes result -shell 18
checkfreebounds result 926
set nb_compound_good 1
set nb_shape_good 6
-checkmaxtol result -ref 0.0050001000000007819
+checkmaxtol result -tol 0.0050001000000007819
checknbshapes result -shell 0
checkfreebounds result 0
set nb_compound_good 1
set nb_shape_good 7
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 0
checkfreebounds result 0
set nb_compound_good 0
set nb_shape_good 13
-checkmaxtol result -ref 1.5
+checkmaxtol result -tol 1.5
checknbshapes result -shell 1
checkfreebounds result 0
set nb_compound_good 1
set nb_shape_good 21
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 0
checkfreebounds result 8
set nb_compound_good 1
set nb_shape_good 7
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 0
checkfreebounds result 0
set nb_compound_good 0
set nb_shape_good 13
-checkmaxtol result -ref 1.5
+checkmaxtol result -tol 1.5
checknbshapes result -shell 1
checkfreebounds result 0
set nb_compound_good 1
set nb_shape_good 29
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 10
set nb_compound_good 0
set nb_shape_good 25
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 6
set nb_compound_good 1
set nb_shape_good 1756
-checkmaxtol result -ref 0.080878557461246572
+checkmaxtol result -tol 0.080878557461246572
checknbshapes result -shell 2
checkfreebounds result 0
set nb_compound_good 1
set nb_shape_good 1759
-checkmaxtol result -ref 0.080878557461246572
+checkmaxtol result -tol 0.080878557461246572
checknbshapes result -shell 2
checkfreebounds result 0
set nb_compound_good 1
set nb_shape_good 1761
-checkmaxtol result -ref 0.080878557461246572
+checkmaxtol result -tol 0.080878557461246572
checknbshapes result -shell 2
checkfreebounds result 6
set nb_compound_good 1
set nb_shape_good 1759
-checkmaxtol result -ref 0.080878557461246572
+checkmaxtol result -tol 0.080878557461246572
checknbshapes result -shell 2
checkfreebounds result 0
set nb_compound_good 1
set nb_shape_good 1762
-checkmaxtol result -ref 0.080645000662448688
+checkmaxtol result -tol 0.080645000662448688
checknbshapes result -shell 2
checkfreebounds result 9
set nb_compound_good 1
set nb_shape_good 1756
-checkmaxtol result -ref 0.080878557461246572
+checkmaxtol result -tol 0.080878557461246572
checknbshapes result -shell 2
checkfreebounds result 0
set nb_compound_good 1
set nb_shape_good 3476
-checkmaxtol result -ref 0.0451323239933289
+checkmaxtol result -tol 0.0451323239933289
checknbshapes result -shell 0
checkfreebounds result 1469
set nb_compound_good 0
set nb_shape_good 13
-checkmaxtol result -ref 1.5
+checkmaxtol result -tol 1.5
checknbshapes result -shell 1
checkfreebounds result 0
set nb_compound_good 1
set nb_shape_good 1756
-checkmaxtol result -ref 0.080878557461246572
+checkmaxtol result -tol 0.080878557461246572
checknbshapes result -shell 2
checkfreebounds result 0
set nb_compound_good 1
set nb_shape_good 21
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 0
checkfreebounds result 8
set nb_compound_good 0
set nb_shape_good 13
-checkmaxtol result -ref 1.5
+checkmaxtol result -tol 1.5
checknbshapes result -shell 1
checkfreebounds result 0
set nb_compound_good 1
set nb_shape_good 29
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 10
set nb_compound_good 0
set nb_shape_good 25
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 6
set nb_compound_good 1
set nb_shape_good 1761
-checkmaxtol result -ref 0.066338232054955981
+checkmaxtol result -tol 0.066338232054955981
checknbshapes result -shell 2
checkfreebounds result 6
set nb_compound_good 1
set nb_shape_good 1759
-checkmaxtol result -ref 0.066338232054955981
+checkmaxtol result -tol 0.066338232054955981
checknbshapes result -shell 2
checkfreebounds result 6
puts "${BugNumber}: OK"
}
-checkmaxtol result -ref 2279.641703013865
+checkmaxtol result -tol 2279.641703013865
checknbshapes result -shell 1
checkfreebounds result 5
set nb_compound_good 0
set nb_shape_good 19
-checkmaxtol result -ref 1.6856648382486999e-005
+checkmaxtol result -tol 1.6856648382486999e-005
checknbshapes result -shell 1
checkfreebounds result 0
checkcolor $x_coord $y_coord 1 1 0
-checkmaxtol result -ref 1.0001007808605688e-007
+checkmaxtol result -tol 1.0001007808605688e-007
checknbshapes result -shell 1
checkfreebounds result 6
puts "Faulty ${BugNumber} : offsetshape is wrong"
}
-checkmaxtol result -min_tol 1.
+checkmaxtol result -max_tol 1.
set square 981.941
puts "Faulty ${BugNumber} : offsetshape is wrong"
}
-checkmaxtol result -min_tol 1.
+checkmaxtol result -max_tol 1.
set square 982.254
puts "Faulty ${BugNumber} : offsetshape is wrong"
}
-checkmaxtol result -min_tol 1.
+checkmaxtol result -max_tol 1.
set square 1185.03
puts "Faulty ${BugNumber} : offsetshape is wrong"
}
-checkmaxtol result -min_tol 1.
+checkmaxtol result -max_tol 1.
set square 1185.03
puts "Faulty ${BugNumber} : offsetshape is wrong"
}
-checkmaxtol result -min_tol 1.
+checkmaxtol result -max_tol 1.
set square 876.584
puts "Faulty ${BugNumber} : offsetshape is wrong"
}
-checkmaxtol result -min_tol 1.
+checkmaxtol result -max_tol 1.
set square 876.584
puts "Faulty ${BugNumber} : offsetshape is wrong"
}
-checkmaxtol result -min_tol 1.
+checkmaxtol result -max_tol 1.
set square 1116.06
puts "OK OCC714: SEWING operation was made PROPERLY"
}
-checkmaxtol result -ref 0.25619311354638169
+checkmaxtol result -tol 0.25619311354638169
checknbshapes result -shell 1
checkfreebounds result 0
puts "Mode +t works properly"
}
-checkmaxtol result -ref 1.0000280013370991e-005
+checkmaxtol result -tol 1.0000280013370991e-005
checknbshapes result -shell 1
checkfreebounds result 456
sewing result 0.01 v_1 v_2
checkshape result
-checkmaxtol result -ref 6.7739238740616194e-005 -source {v_1 v_2} -min_tol 1.e-4
+checkmaxtol result -tol 6.7739238740616194e-005 -source {v_1 v_2} -max_tol 1.e-4
checknbshapes result -shell 1
checkfreebounds result 8
# 1
checkshape aa
-checkmaxtol aa -min_tol ${CMP_TOL}
+checkmaxtol aa -max_tol ${CMP_TOL}
# 2
checkshape bb
-checkmaxtol bb -min_tol ${CMP_TOL}
+checkmaxtol bb -max_tol ${CMP_TOL}
sewing result 0.00001 v_1 v_2
checkshape result
-checkmaxtol result -ref 1.0000002593655894e-007 -source {v_1 v_2} -min_tol 1.e-4
+checkmaxtol result -tol 1.0000002593655894e-007 -source {v_1 v_2} -max_tol 1.e-4
checknbshapes result -shell 1
checkfreebounds result 2
sewing result 0.1 a_1 a_2
checkshape result
-checkmaxtol result -ref 0.076388434959049206 -source {a_1 a_2}
+checkmaxtol result -tol 0.076388434959049206 -source {a_1 a_2}
checknbshapes result -shell 1
checkfreebounds result 12
sewing result 0.1 a
checkshape result
-checkmaxtol result -ref 0.58022137281123598 -source {a}
+checkmaxtol result -tol 0.58022137281123598 -source {a}
checknbshapes result -shell 1
checkfreebounds result 9
sewing result f1 f2 f3 f4 f5 f6
checkshape result
-checkmaxtol result -ref 2.0535401727466399e-005 -source {f1 f2 f3 f4 f5 f6} -min_tol 0 -multi_tol 5.
+checkmaxtol result -tol 2.0535401727466399e-005 -source {f1 f2 f3 f4 f5 f6} -max_tol 0 -multi_tol 5.
checknbshapes result -shell 1
checkfreebounds result 0
sewing result f1 f2
checkshape result
-checkmaxtol result -ref 0.016556973295771653 -source {f1 f2} -min_tol 0 -multi_tol 5.
+checkmaxtol result -tol 0.016556973295771653 -source {f1 f2} -max_tol 0 -multi_tol 5.
checknbshapes result -shell 1
checkfreebounds result 6
fit
xwd $imagedir/${test_image}_2.png
-checkmaxtol sr1 -ref 1.0000000015308085e-007
+checkmaxtol sr1 -tol 1.0000000015308085e-007
checknbshapes sr1 -shell 1
checkfreebounds sr1 2
-checkmaxtol sr2 -ref 1.0000000015308085e-007
+checkmaxtol sr2 -tol 1.0000000015308085e-007
checknbshapes sr2 -shell 1
checkfreebounds sr2 0
sewing result 0.1 a
-checkmaxtol result -ref 0.21794517334615857
+checkmaxtol result -tol 0.21794517334615857
checknbshapes result -shell 1
checkfreebounds result 0
# result should be single open edge with length 0.125
checknbshapes result -vertex 2 -edge 1
-checkmaxtol result -ref 0.0001
+checkmaxtol result -tol 0.0001
if { [regexp {Mass\s*:\s*([0-9.e+-]*)} [lprops result] dummy length] } {
checkreal "Length of the section" $length 0.125 0.0001 0.1
sewing result 1 sh
checkshape result
-checkmaxtol result -ref 0.0030000000000000001
+checkmaxtol result -tol 0.0030000000000000001
checknbshapes result -shell 1
checkfreebounds result 0
puts "OK ${BugNumber}"
}
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 0
checkfreebounds result 2
puts "OK ${BugNumber}"
}
-checkmaxtol result -ref 1.0000006355287399e-007
+checkmaxtol result -tol 1.0000006355287399e-007
checknbshapes result -shell 1
checkfreebounds result 8
puts "OK ${BugNumber}"
}
-checkmaxtol result -ref 4.8601049330873404e-006
+checkmaxtol result -tol 4.8601049330873404e-006
checknbshapes result -shell 1
checkfreebounds result 5
puts "OCC326 OK: Sewing is ok, there is no except"
}
-checkmaxtol result -ref 411.37576056225498
+checkmaxtol result -tol 411.37576056225498
checknbshapes result -shell 1
checkfreebounds result 254
#
sewing result1 100. a
- checkmaxtol result1 -ref 9.43897e+001
+ checkmaxtol result1 -tol 9.43897e+001
checknbshapes result1 -shell 1
checkfreebounds result1 86
tpcompound a
sewing result2 100. a
- checkmaxtol result2 -ref 9.43897e+001
+ checkmaxtol result2 -tol 9.43897e+001
checknbshapes result2 -shell 1
checkfreebounds result2 86
puts "Elapsed time is less then 30 seconds - OK"
}
- checkmaxtol result -ref 0.96087447225733291
+ checkmaxtol result -tol 0.96087447225733291
checknbshapes result -shell 13
checkfreebounds result 1247
}
puts "Error : Amount of free closed wires is not equal 1"
}
-checkmaxtol result -ref 9.43897e+001
+checkmaxtol result -tol 9.43897e+001
checknbshapes result -shell 1
checkfreebounds result 86
puts " BUC60898 OK: function SEWING works without except"
}
- checkmaxtol result -ref 0.077930308575156593
+ checkmaxtol result -tol 0.077930308575156593
checknbshapes result -shell 4
checkfreebounds result 1725
# 1
set CMP_TOL 1.e-7
-checkmaxtol f -min_tol ${CMP_TOL}
+checkmaxtol f -max_tol ${CMP_TOL}
mksurface s f
mkcurve c e
puts "Error : Square is not valid"
}
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 0
checkfreebounds result 2
puts "Tolerance valed. Function FixShape works CORRECTLY"
}
-checkmaxtol result -ref 1.59071e+000
+checkmaxtol result -tol 1.59071e+000
checknbshapes result -shell 1
checkfreebounds result 227
puts "Faulty ${BugNumber}"
}
-checkmaxtol result -ref 185.91005891234283
+checkmaxtol result -tol 185.91005891234283
checknbshapes result -shell 1
checkfreebounds result 73
sewing result ${tolerance} a
checkshape result
-checkmaxtol result -ref 1.0021647610996499e-005
+checkmaxtol result -tol 1.0021647610996499e-005
checknbshapes result -shell 1
checkfreebounds result 0
puts "Faulty OCC859: here is sewing problem"
}
-checkmaxtol result -ref 0.00025118948696105701
+checkmaxtol result -tol 0.00025118948696105701
checknbshapes result -shell 1
checkfreebounds result 6
-# Main script in this test grid; does all the job.
-# Individual test scripts are used only to specify data file and reference
-# test data (expected values of test execution).
-# The procedure is:
-# - load specified data file
-# - check transfer status, shape, and attributes against expected values
-# - write data to
-
-# Set flag dump_file to 1 in order to regenerate script files with actual data
-# used as reference. In this mode all tests intentionaly report failure.
-set dump_file 0
-########################################################################
-set mist_Second 0; set mist_w 0; set mist 0; set isIGES 0;
-############################################ DATA c ################
-set dfal_First 0; set dwar_First 0; set dcomp_First 0
-set dfal_Second 0; set dwar_Second 0; set dcomp_Second 0
-############################################# TPSTAT c ##############
-set fal_First 0; set war_First 0; set comp_First 0
-set fal_Second 0; set war_Second 0; set comp_Second 0
-###################################### DECAF information ##########
-set nblev0_First 0; set nblev1_First 0; set nblev2_First 0; set nblev_total_First 0; set nbshname_First 0;
-set nbshcolor_First 0; set nbshlayer_First 0;
-set nbcentroid_First 0; set nbvolume_First 0; set nbarea_First 0;
-set nbcolor_First 0; set colors_First ""; set nblayer_First 0; set layers_First "";
-set nblev0_Second 0; set nblev1_Second 0; set nblev2_Second 0; set nblev_total_Second 0; set nbshname_Second 0;
-set nbshcolor_Second 0; set nbshlayer_Second 0;
-set nbcentroid_Second 0; set nbvolume_Second 0; set nbarea_Second 0;
-set nbcolor_Second 0; set colors_Second ""; set nblayer_Second 0; set layers_Second "";
-############################################# TOLERANCE ############
-set MaxTol_First 0; set AvgTol_First 0
-set MaxTol_Second 0; set AvgTol_Second 0
-############################################# STATSHAPE ############
-set sol_First 0; set she_First 0; set fac_First 0; set fwir_First 0; set fedg_First 0; set sedg_First 0
-set sol_Second 0; set she_Second 0; set fac_Second 0; set fwir_Second 0; set fedg_Second 0; set sedg_Second 0
-############################################# NBSHAPES #############
-set fa_First 0; set sh_First 0; set so_First 0; set co_First 0; set shpp_First 0
-set fa_Second 0; set sh_Second 0; set so_Second 0; set co_Second 0; set shpp_Second 0
-###################################### CHECKSHAPE ##################
-set chwi_First 0; set chfa_First 0; set chsh_First 0; set chso_First 0
-set chwi_Second 0; set chfa_Second 0; set chsh_Second 0; set chso_Second 0
-###################################################################
-set ref_Compare 0
-set todo_msg ""
-set todo_mask "puts \"TODO CR23096 ALL: "
-set Mandriva_todo_mask "puts \"TODO CR23096 ALL:"
-set end_line "\" \n"
-##################################################################
-
-# Read original file
-if { [string length $filename] > 1} {
- set ext [file extension $filename]
- set ReadCommand ReadStep
- set WriteCommand WriteStep
- set isIGES 0
- if { $ext == ".igs" || $ext == ".iges" } {
- set ReadCommand ReadIges
- set WriteCommand WriteIges
- set isIGES 1
- }
- if {[info exist ProductMode] && $ProductMode == "OFF"} {
- set tmp [param read.step.product.mode OFF]
- }
- set path_file [locate_data_file $filename]
- if { [catch { $ReadCommand D_First $path_file } catch_result] } {
- set err_msg "Error: First - file was not read - exception "
- puts $err_msg
- append todo_msg $todo_mask $err_msg $end_line
- set mist 1
- }
-
-} else {
- set mist 1
-}
-
-# Get information about translation
-if { $mist < 1} {
- puts ""
-
- set tps_2 [data c]
- if { [llength $tps_2] > 0 } {
- # Finding all strings with warnings
- set a [regexp -all -inline {[\t ]+([-0-9.+eE]+)[\t ]+W:} $tps_2]
- # Extracting counts of warnings
- set b [regexp -all -inline {([-0-9.+eE]+)} $a]
- # Calculating total number of warnings
- foreach i $b {set dwar_First [expr $dwar_First + $i]}
- set dwar_First [expr $dwar_First/4]
-
- # Finding all strings with faulties
- set a [regexp -all -inline {[\t ]+([-0-9.+eE]+)[\t ]+F:} $tps_2]
- # Extracting counts of faulties
- set b [regexp -all -inline {([-0-9.+eE]+)} $a]
- # Calculating total number of faulties
- foreach i $b {set dfal_First [expr $dfal_First + $i]}
- set dfal_First [expr $dfal_First/4]
- # Calculating total number of faulties and warnings
- set dcomp_First [expr $dfal_First + $dwar_First]
-
- } else {
- puts " DATA c checking was NOT provided"
- }
-
- puts ""
- set tps_1 [tpstat c]
- set colvo [llength $tps_1]
- if { ${colvo} > 0 } {
- # Finding all strings with warnings
- set a [regexp -all -inline {[\t ]+([-0-9.+eE]+)[\t ]+W:} $tps_1]
- # Extracting counts of warnings
- set b [regexp -all -inline {([-0-9.+eE]+)} $a]
- # Calculating total number of warnings
- foreach i $b {set war_First [expr $war_First + $i]}
- set war_First [expr $war_First/4]
-
- # Finding all strings with faulties
- set a [regexp -all -inline {[\t ]+([-0-9.+eE]+)[\t ]+F:} $tps_1]
- # Extracting counts of faulties
- set b [regexp -all -inline {([-0-9.+eE]+)} $a]
- # Calculating total number of faulties
- foreach i $b {set fal_First [expr $fal_First + $i]}
- set fal_First [expr $fal_First/4]
- # Calculating total number of faulties and warnings
- set comp_First [expr $fal_First + $war_First]
-
-
- } else {
- puts " TPSTAT c checking was NOT provided"
- }
-
- # Get DECAF information about (color, layers and properties)
- puts ""
-
- set xst [ XStat D_First ]
-
- if { [llength $xst] > 0 } {
- regexp {level +N +0 +: +([-0-9.+eE]+)} $xst full nblev0_First
- regexp {level +N +1 +: +([-0-9.+eE]+)} $xst full nblev1_First
- regexp {level +N +2 +: +([-0-9.+eE]+)} $xst full nblev2_First
- regexp {Total +number +of +labels +for +shapes +in +the +document += +([-0-9.+eE]+)} $xst full nblev_total_First
- regexp {Number +of +labels +with +name += +([-0-9.+eE]+)} $xst full nbshname_First
- regexp {Number +of +labels +with +color +link += +([-0-9.+eE]+)} $xst full nbshcolor_First
- regexp {Number +of +labels +with +layer +link += +([-0-9.+eE]+)} $xst full nbshlayer_First
- regexp {Number +of +Centroid Props += +([-0-9.+eE]+)} $xst full nbcentroid_First
- regexp {Number +of +Volume Props += +([-0-9.+eE]+)} $xst full nbvolume_First
- regexp {Number +of +Area Props += +([-0-9.+eE]+)} $xst full nbarea_First
- regexp {Number +of +colors += +([-0-9.+eE]+)} $xst full nbcolor_First
- regexp {Number +of +colors += +[-0-9.+eE]+\n([^\n]*)} $xst full colors_First
- regexp {Number +of +layers += +([-0-9.+eE]+)} $xst full nblayer_First
- regexp {Number +of +layers += +[-0-9.+eE]+\n([^\n]*)} $xst full layers_First
- } else {
- puts " DECAF information was NOT provided"
- }
-
- # Get shape for standard analysis
- puts ""
- if { [catch { XGetOneShape res_1 D_First } catch_result] } {
- set err_msg "Error : First - cannot get shape from document - exception"
- puts $err_msg
- append todo_msg $todo_mask $err_msg $end_line
- set mist 1
- }
- if { $mist < 1 && [info exists res_1] == 0 } {
- set err_msg "Error : First - cannot read any relevant data from the file"
- puts $err_msg
- append todo_msg $todo_mask $err_msg $end_line
- set mist 1
- }
-
-
- if { $mist < 1 } {
- # Standard analysis
- puts ""
-
- set tol [tolerance res_1]
-
- if { [llength $tol] > 0 } {
- regexp {Tolerance +MAX=([-0-9.+eE]+) +AVG=([-0-9.+eE]+) +MIN=[-0-9.+eE]+} $tol full MaxTol_First AvgTol_First
- } else {
- puts " TOLERANCE checking was NOT provided"
- }
-
- puts ""
-
- set tps_3 [ statshape res_1]
- set col [llength $tps_3]
- if { ${col} > 0 } {
- regexp {([-0-9.+eE]+)\t+ +EDGE \(Free\)} $tps_3 full fedg_First
- regexp {([-0-9.+eE]+)\t+ +EDGE \(Shared\)} $tps_3 full sedg_First
- regexp {([-0-9.+eE]+)\t+ +WIRE \(Free\)} $tps_3 full fwir_First
- regexp {([-0-9.+eE]+)\t+ +FACE} $tps_3 full fac_First
- regexp {([-0-9.+eE]+)\t+ +SHELL} $tps_3 full she_First
- regexp {([-0-9.+eE]+)\t+ +SOLID} $tps_3 full sol_First
- } else {
- puts " STATSHAPE checking was NOT provided"
- }
- puts ""
-
-
- set nbs [ nbshapes res_1]
- if { [llength ${nbs}] > 0 } {
- regexp {FACE +: +([-0-9.+eE]+)} $nbs full fa_First
- regexp {SHELL +: +([-0-9.+eE]+)} $nbs full sh_First
- regexp {SOLID +: +([-0-9.+eE]+)} $nbs full so_First
- regexp {COMPOUND +: +([-0-9.+eE]+)} $nbs full co_First
- regexp {SHAPE +: +([-0-9.+eE]+)} $nbs full shpp_First
- } else {
- puts " NBSHAPES checking was NOT provided"
- }
-
-
- set chbr [checkshape res_1 ff]
- if { [llength ${chbr}] > 0 } {
- regexp {WIRE\t+: +([-0-9.+eE]+).+} $chbr full chwi_First
- regexp {FACE\t+: +([-0-9.+eE]+).+} $chbr full chfa_First
- regexp {SHELL\t+: +([-0-9.+eE]+).+} $chbr full chsh_First
- regexp {SOLID\t+: +([-0-9.+eE]+).+} $chbr full chso_First
- } else {
- puts " CHECKSHAPE checking was NOT provided"
- }
- }
-}
-# Writing file
-if { $mist < 1} {
- puts " "
- puts "-----------------------------WRITING FILE ------------------------------"
- file delete $imagedir/${casename}_D_First$ext
- if { [catch { $WriteCommand D_First $imagedir/${casename}_D_First$ext } catch_result] } {
- set err_msg "Error: First - file was not written - exception"
- puts $err_msg
- append todo_msg $todo_mask $err_msg $end_line
- set mist_w 1
- }
- if { $mist_w < 1 } {
-
- if { [catch { $ReadCommand D_Second $imagedir/${casename}_D_First$ext } catch_result] } {
- set err_msg "Errorr: Second - file was not read - exception"
- puts $err_msg
- append todo_msg $todo_mask $err_msg $end_line
- set mist_Second 1
- }
- }
- catch {[file delete $imagedir/${casename}_D_First$ext]}
- # Close the document
-
- if { [catch { Close D_First } catch_result] } {
- set err_msg "Error : cannot close a document D_First - exception"
- puts $err_msg
- append todo_msg $todo_mask $err_msg $end_line
- #set mist 1
- }
-}
-
-if { $mist_w > 0 || $mist_Second > 0 } {
- set mist 2
-}
-
-# Get information about translation
-if { $mist < 1} {
- puts ""
-
- set tps_2 [data c]
- if { [llength $tps_2] > 0 } {
- # Finding all strings with warnings
- set a [regexp -all -inline {[\t ]+([-0-9.+eE]+)[\t ]+W:} $tps_2]
- # Extracting counts of warnings
- set b [regexp -all -inline {([-0-9.+eE]+)} $a]
- # Calculating total number of warnings
- foreach i $b {set dwar_Second [expr $dwar_Second + $i]}
- set dwar_Second [expr $dwar_Second/4]
-
- # Finding all strings with faulties
- set a [regexp -all -inline {[\t ]+([-0-9.+eE]+)[\t ]+F:} $tps_2]
- # Extracting counts of faulties
- set b [regexp -all -inline {([-0-9.+eE]+)} $a]
- # Calculating total number of faulties
- foreach i $b {set dfal_Second [expr $dfal_Second + $i]}
- set dfal_Second [expr $dfal_Second/4]
- # Calculating total number of faulties and warnings
- set dcomp_Second [expr $dfal_Second + $dwar_Second]
-
-
- } else {
- puts " DATA c checking was NOT provided"
- }
-
- puts ""
-
- set tps_1 [tpstat c]
- set colvo [llength $tps_1]
- if { ${colvo} > 0 } {
- # Finding all strings with warnings
- set a [regexp -all -inline {[\t ]+([-0-9.+eE]+)[\t ]+W:} $tps_1]
- # Extracting counts of warnings
- set b [regexp -all -inline {([-0-9.+eE]+)} $a]
- # Calculating total number of warnings
- foreach i $b {set war_Second [expr $war_Second + $i]}
- set war_Second [expr $war_Second/4]
-
- # Finding all strings with faulties
- set a [regexp -all -inline {[\t ]+([-0-9.+eE]+)[\t ]+F:} $tps_1]
- # Extracting counts of faulties
- set b [regexp -all -inline {([-0-9.+eE]+)} $a]
- # Calculating total number of faulties
- foreach i $b {set fal_Second [expr $fal_Second + $i]}
- set fal_Second [expr $fal_Second/4]
- # Calculating total number of faulties and warnings
- set comp_Second [expr $fal_Second + $war_Second]
-
-
- } else {
- puts " TPSTAT c checking was NOT provided"
- }
-
- # Get DECAF information about (color, layers and properties)
- puts ""
-
- set xst [ XStat D_Second ]
- if { [llength $xst] > 0 } {
- regexp {level +N +0 +: +([-0-9.+eE]+)} $xst full nblev0_Second
- regexp {level +N +1 +: +([-0-9.+eE]+)} $xst full nblev1_Second
- regexp {level +N +2 +: +([-0-9.+eE]+)} $xst full nblev2_Second
- regexp {Total +number +of +labels +for +shapes +in +the +document += +([-0-9.+eE]+)} $xst full nblev_total_Second
- regexp {Number +of +labels +with +name += +([-0-9.+eE]+)} $xst full nbshname_Second
- regexp {Number +of +labels +with +color +link += +([-0-9.+eE]+)} $xst full nbshcolor_Second
- regexp {Number +of +labels +with +layer +link += +([-0-9.+eE]+)} $xst full nbshlayer_Second
- regexp {Number +of +Centroid Props += +([-0-9.+eE]+)} $xst full nbcentroid_Second
- regexp {Number +of +Volume Props += +([-0-9.+eE]+)} $xst full nbvolume_Second
- regexp {Number +of +Area Props += +([-0-9.+eE]+)} $xst full nbarea_Second
- regexp {Number +of +colors += +([-0-9.+eE]+)} $xst full nbcolor_Second
- regexp {Number +of +colors += +[-0-9.+eE]+\n([^\n]*)} $xst full colors_Second
- regexp {Number +of +layers += +([-0-9.+eE]+)} $xst full nblayer_Second
- regexp {Number +of +layers += +[-0-9.+eE]+\n([^\n]*)} $xst full layers_Second
- } else {
- puts " DECAF information was NOT provided"
- }
- # Get shape for standard analysis
- puts ""
- if { [catch { XGetOneShape res_2 D_Second } catch_result] } {
- set err_msg "Error : Second - cannot get shape from document - exception"
- puts $err_msg
- append todo_msg $todo_mask $err_msg $end_line
- set mist 1
- }
- if { $mist < 1 && [info exists res_2] == 0 } {
- set err_msg "Error : Second - cannot read any relevant data from the file"
- puts $err_msg
- append todo_msg $todo_mask $err_msg $end_line
-
- set mist_Second 1
- set mist 1
- }
-
- if { $mist < 1} {
- # Standard analysis
- puts ""
-
- set tol [tolerance res_2]
- if { [llength $tol] > 0 } {
- regexp {Tolerance +MAX=([-0-9.+eE]+) +AVG=([-0-9.+eE]+) +MIN=[-0-9.+eE]+} $tol full MaxTol_Second AvgTol_Second
- } else {
- puts " TOLERANCE checking was NOT provided"
- }
-
- puts ""
-
- set tps_3 [ statshape res_2]
- set col [llength $tps_3]
- if { ${col} > 0 } {
- regexp {([-0-9.+eE]+)\t+ +EDGE \(Free\)} $tps_3 full fedg_Second
- regexp {([-0-9.+eE]+)\t+ +EDGE \(Shared\)} $tps_3 full sedg_Second
- regexp {([-0-9.+eE]+)\t+ +WIRE \(Free\)} $tps_3 full fwir_Second
- regexp {([-0-9.+eE]+)\t+ +FACE} $tps_3 full fac_Second
- regexp {([-0-9.+eE]+)\t+ +SHELL} $tps_3 full she_Second
- regexp {([-0-9.+eE]+)\t+ +SOLID} $tps_3 full sol_Second
- } else {
- puts " STATSHAPE checking was NOT provided"
- }
- puts ""
-
-
- set nbs [ nbshapes res_2]
- if { [llength ${nbs}] > 0 } {
- regexp {FACE +: +([-0-9.+eE]+)} $nbs full fa_Second
- regexp {SHELL +: +([-0-9.+eE]+)} $nbs full sh_Second
- regexp {SOLID +: +([-0-9.+eE]+)} $nbs full so_Second
- regexp {COMPOUND +: +([-0-9.+eE]+)} $nbs full co_Second
- regexp {SHAPE +: +([-0-9.+eE]+)} $nbs full shpp_Second
- } else {
- puts " NBSHAPES checking was NOT provided"
- }
-
-
- set chbr [checkshape res_2 ff]
- if { [llength ${chbr}] > 0 } {
- regexp {WIRE\t+: +([-0-9.+eE]+).+} $chbr full chwi_Second
- regexp {FACE\t+: +([-0-9.+eE]+).+} $chbr full chfa_Second
- regexp {SHELL\t+: +([-0-9.+eE]+).+} $chbr full chsh_Second
- regexp {SOLID\t+: +([-0-9.+eE]+).+} $chbr full chso_Second
- } else {
- puts " CHECKSHAPE checking was NOT provided"
- }
- }
-}
-
-#Collect results of loop back test
-
-if { $mist < 1 } {
- set dat_check "DATA : OK"
- set tpst_check "TPSTAT : OK"
- set check_check "CHECKSHAPE : OK"
- set nbsh_check "NBSHAPES : OK"
- set ststh_check "STATSHAPE : OK"
- set toler_check "TOLERANCE : OK"
- set lbls_check "LABELS : OK"
- set prps_check "PROPS : OK"
- set clrs_check "COLORS : OK"
- set lrs_check "LAYERS : OK"
-
- if { $dcomp_First < $dcomp_Second || $dfal_First < $dfal_Second } {
- set dat_check "DATA : Faulty"
- append todo_msg $todo_mask $dat_check $end_line
- }
- if { $fal_First < $fal_Second || $war_First < $war_Second } {
-
- set tpst_check "TPSTAT : Faulty"
- append todo_msg $todo_mask $tpst_check $end_line
- }
- if { $chwi_First < $chwi_Second || $chfa_First < $chfa_Second || $chsh_First < $chsh_Second || $chso_First < $chso_Second } {
- set check_check "CHECKSHAPE : Faulty"
- append todo_msg $todo_mask $check_check $end_line
- }
- if { ($isIGES == 0 && $shpp_First > $shpp_Second) ||
- ($isIGES == 1 && ($shpp_First - $co_First) > ($shpp_Second - $co_Second))} {
- set nbsh_check "NBSHAPES : Faulty"
- append todo_msg $todo_mask $nbsh_check $end_line
- }
- if { $sol_First < $sol_Second || $she_First < $she_Second || $fac_First < $fac_Second || $fwir_First < $fwir_Second || $fedg_First < $fedg_Second} {
- set ststh_check "STATSHAPE : Faulty"
- append todo_msg $todo_mask $ststh_check $end_line
- }
-
- if { ([expr 1.*($MaxTol_Second - $MaxTol_First)] > [expr 0.0001 * $MaxTol_First] && [expr 1. * abs($MaxTol_First-$MaxTol_Second)] > 0.0000001) || ($MaxTol_Second == 0 && $MaxTol_First > 0)} {
- set toler_check "TOLERANCE : Faulty"
- append todo_msg $todo_mask $toler_check $end_line
- }
-
- if { $nblev0_First != $nblev0_Second || $nblev1_First != $nblev1_Second || $nblev2_First != $nblev2_Second || $nblev_total_First != $nblev_total_Second || $nbshname_First != $nbshname_Second || $nbshcolor_First != $nbshcolor_Second || $nbshlayer_First != $nbshlayer_Second } {
- set lbls_check "LABELS : Faulty"
- append todo_msg $todo_mask $lbls_check $end_line
- }
- if { $nbcentroid_First != $nbcentroid_Second || $nbvolume_First != $nbvolume_Second || $nbarea_First != $nbarea_Second } {
- set prps_check "PROPS : Faulty"
- append todo_msg $todo_mask $prps_check $end_line
- }
- if { $nbcolor_First != $nbcolor_Second } {
- set clrs_check "COLORS : Faulty"
- append todo_msg $todo_mask $clrs_check $end_line
- }
- if { $nblayer_First != $nblayer_Second } {
- set lrs_check "LAYERS : Faulty"
- append todo_msg $todo_mask $lrs_check $end_line
- }
-}
-
-if { $mist != 1 } {
- puts ""
- set result ""
- append result [format "DATA : Faulties = %s ( %s ) Warnings = %s ( %s ) Summary = %s ( %s )\n" \
- $dfal_Second $dfal_First $dwar_Second $dwar_First $dcomp_Second $dcomp_First ]
- append result [format "TPSTAT : Faulties = %s ( %s ) Warnings = %s ( %s ) Summary = %s ( %s )\n" \
- $fal_Second $fal_First $war_Second $war_First $comp_Second $comp_First ]
- append result [format "CHECKSHAPE : Wires = %s ( %s ) Faces = %s ( %s ) Shells = %s ( %s ) Solids = %s ( %s )\n" \
- $chwi_Second $chwi_First $chfa_Second $chfa_First $chsh_Second $chsh_First $chso_Second $chso_First ]
- append result [format "NBSHAPES : Solid = %s ( %s ) Shell = %s ( %s ) Face = %s ( %s ) Summary = %s ( %s )\n" \
- $so_Second $so_First $sh_Second $sh_First $fa_Second $fa_First $shpp_Second $shpp_First ]
- append result [format "STATSHAPE : Solid = %s ( %s ) Shell = %s ( %s ) Face = %s ( %s ) FreeWire = %s ( %s ) FreeEdge = %s ( %s ) SharedEdge = %s ( %s )\n" \
- $sol_Second $sol_First $she_Second $she_First $fac_Second $fac_First $fwir_Second $fwir_First $fedg_Second $fedg_First $sedg_Second $sedg_First ]
- append result [format "TOLERANCE : MaxTol = %14.10g ( %14.10g ) AvgTol = %14.10g ( %14.10g )\n" \
- $MaxTol_Second $MaxTol_First $AvgTol_Second $AvgTol_First ]
- append result [format "LABELS : N0Labels = %s ( %s ) N1Labels = %s ( %s ) N2Labels = %s ( %s ) TotalLabels = %s ( %s ) NameLabels = %s ( %s ) ColorLabels = %s ( %s ) LayerLabels = %s ( %s )\n" \
- $nblev0_Second $nblev0_First $nblev1_Second $nblev1_First $nblev2_Second $nblev2_First $nblev_total_Second $nblev_total_First $nbshname_Second $nbshname_First $nbshcolor_Second $nbshcolor_First $nbshlayer_Second $nbshlayer_First ]
- append result [format "PROPS : Centroid = %s ( %s ) Volume = %s ( %s ) Area = %s ( %s )\n" \
- $nbcentroid_Second $nbcentroid_First $nbvolume_Second $nbvolume_First $nbarea_Second $nbarea_First ]
- append result [format "NCOLORS : NColors = %s ( %s )\n" \
- $nbcolor_Second $nbcolor_First ]
- append result [format "COLORS : Colors = %s ( %s )\n" \
- [lsort $colors_Second] [lsort $colors_First] ]
- append result [format "NLAYERS : NLayers = %s ( %s )\n" \
- $nblayer_Second $nblayer_First ]
- append result [format "LAYERS : Layers = %s ( %s )\n" \
- [lsort $layers_Second] [lsort $layers_First] ]
-}
-
-puts ""
-puts ""
-puts "########################### RESULTS ###############################"
-puts ""
-puts "========================== Loop Back test ========================="
-puts ""
-if {$mist == 1 } {
- set err_msg "Error : Here is reading problem"
- puts $err_msg
- append todo_msg $todo_mask $err_msg $end_line
-} else {
- puts "File was read PROPERLY - OK"
- puts ""
- if {$mist_w > 0 } {
- set err_msg "Error : Here is writing problem"
- puts $err_msg
- append todo_msg $todo_mask $err_msg $end_line
- } else {
- puts "File was write PROPERLY - OK"
- puts ""
- if {$mist_Second > 0 } {
- set err_msg "Error : Here is reading problem for writing file"
- puts $err_msg
- append todo_msg $todo_mask $err_msg $end_line
- } else {
- puts "Writing file was read PROPERLY - OK"
- puts ""
- puts $dat_check
- puts $tpst_check
- puts $check_check
- puts $nbsh_check
- puts $ststh_check
- puts $toler_check
- puts $lbls_check
- puts $prps_check
- puts $clrs_check
- puts $lrs_check
- puts ""
- if { $todo_msg != "" } {
- puts $result
- puts ""
- }
- }
- }
-}
-
-
-set err_compare_ref ""
-
-# Put reference data to the test script file if option "dump" is set
-if { $dump_file == 1 } {
- set fd_stream [open $dirname/$groupname/$gridname/$casename w]
- puts $fd_stream "# !!!! This file is generated automatically, do not edit manually! See end script"
- if { $todo_msg != "" } {
- puts $fd_stream $todo_msg
- puts $fd_stream ""
- }
- if {[info exist LinuxFaulties] && [llength $LinuxFaulties] != 0} {
- for {set i 0} { $i < [llength $LinuxFaulties] } { incr i } {
- puts $fd_stream "$Mandriva_todo_mask [lindex $LinuxFaulties $i] : Faulty $end_line"
- }
- }
- if {[info exist LinuxDiff] && $LinuxDiff != 0} {
- puts $fd_stream "$Mandriva_todo_mask Error : $LinuxDiff differences with reference data found :$end_line"
- }
-
- if {[info exist LinuxDiff] && $LinuxDiff != 0} {
- puts $fd_stream "set LinuxDiff $LinuxDiff"
- set LinuxDiff 0
- }
- if {[info exist LinuxFaulties] && [llength $LinuxFaulties] != 0} {
- puts $fd_stream "set LinuxFaulties \{$LinuxFaulties\}"
- set LinuxFaulties {}
- }
- if {[info exist ProductMode] && $ProductMode == "OFF"} {
- puts $fd_stream "set ProductMode OFF"
- }
- puts $fd_stream "set filename $filename"
- if { $mist != 1 } {
- puts $fd_stream ""
- puts $fd_stream "set ref_data \{"
- puts $fd_stream $result
- puts $fd_stream "\}"
- }
- close $fd_stream
-} elseif { $mist != 1 } {
- puts "========================== Comparision with reference data ========"
- puts ""
- # Comparision of reference data with obtained result
- set ref_list [split $ref_data \n]
- set cur_list [split $result \n]
- set nb_ref [llength $ref_list]
- set nb_cur [llength $cur_list]
- for { set i 0 } { $i < $nb_cur } { incr i } {
- set j [expr $i +1]
- set refstr [lindex $ref_list $j]
- set curstr [lindex $cur_list $i]
- set isSplit 0;
- set isOK 1;
-
- if {[regexp "DATA :" $refstr]} {
- set isSplit 1;
- set data_ref [split $refstr " "]
- set data_cur [split $curstr " "]
- set k_ref 1; set k_cur 1
- for { set k 1 } { $k <= 2 } { incr k } {
- while {[string is integer -strict [lindex $data_ref $k_ref]] == 0} {incr k_ref}
- while {[string is integer -strict [lindex $data_cur $k_cur]] == 0} {incr k_cur}
- set ref_number [lindex $data_ref $k_ref]
- set cur_number [lindex $data_cur $k_cur]
- incr k_ref
- incr k_cur
- if { $cur_number > $ref_number} {
- set isOK 0
- }
- }
- }
- if {[regexp "TPSTAT :" $refstr]} {
- set isSplit 1;
- set data_ref [split $refstr " "]
- set data_cur [split $curstr " "]
- set k_ref 1; set k_cur 1
- for { set k 1 } { $k <= 2 } { incr k } {
- while {[string is integer -strict [lindex $data_ref $k_ref]] == 0} {incr k_ref}
- while {[string is integer -strict [lindex $data_cur $k_cur]] == 0} {incr k_cur}
- set ref_number [lindex $data_ref $k_ref]
- set cur_number [lindex $data_cur $k_cur]
- incr k_ref
- incr k_cur
- if { $cur_number > $ref_number} {
- set isOK 0
- }
- }
- }
- if {[regexp "CHECKSHAPE :" $refstr]} {
- set isSplit 1;
- set data_ref [split $refstr " "]
- set data_cur [split $curstr " "]
- set k_ref 1; set k_cur 1
- for { set k 1 } { $k <= 8 } { incr k } {
- while {[string is integer -strict [lindex $data_ref $k_ref]] == 0} {incr k_ref}
- while {[string is integer -strict [lindex $data_cur $k_cur]] == 0} {incr k_cur}
- set ref_number [lindex $data_ref $k_ref]
- set cur_number [lindex $data_cur $k_cur]
- incr k_ref
- incr k_cur
- if { $cur_number > $ref_number} {
- set isOK 0
- }
- }
- }
-
- if {[regexp "TOLERANCE :" $refstr]} {
- set isSplit 1;
- set data_ref [split $refstr " "]
- set data_cur [split $curstr " "]
- set k_ref 1; set k_cur 1
- for { set k 1 } { $k <= 4 } { incr k } {
- while {[string is double -strict [lindex $data_ref $k_ref]] == 0} {incr k_ref}
- while {[string is double -strict [lindex $data_cur $k_cur]] == 0} {incr k_cur}
- set ref_number [lindex $data_ref $k_ref]
- set cur_number [lindex $data_cur $k_cur]
- incr k_ref
- incr k_cur
- if { [expr 1. * ($cur_number-$ref_number)] > 0.0001 &&
- [expr 1. * ($cur_number-$ref_number)] > [expr 0.01 * $ref_number]} {
- set isOK 0
- }
- }
- }
-
-
- if {$isSplit == 0} {
- if {$refstr != $curstr} {set isOK 0}
- }
-
- if { $isOK == 0} {
- incr ref_Compare
- append err_compare_ref " Reference data - $refstr\n"
- append err_compare_ref " Current data - $curstr\n"
- append err_compare_ref "----------------------------------------------\n"
- }
- }
-}
-
-if { $dump_file != 0 } {
- puts "Error : Running in regeneration mode, comparision was not performed!"
- if { $mist != 1 } {
- puts "Generation of test file $groupname/$gridname/$casename successful"
- } else {
- puts "Generation of reference data failed"
- }
-} else {
- if { $ref_Compare > 0} {
- puts "Error : $ref_Compare differences with reference data found :\n$err_compare_ref"
- } else {
- puts "Comparision of current result with reference data - OK\n"
- }
-}
-
-puts "--------------------------------------------------------------------"
-puts ""
-
clear
smallview
-if { $mist < 1 } {
- if { [info exists res_2] && [isdraw res_2] } {
- donly res_2
- isos res_2 0
- fit
- isos res_2 2
- }
+if { [info exists res_2] && [isdraw res_2] } {
+ donly res_2
+ isos res_2 0
+ fit
+ isos res_2 2
} else {
- fit
+ fit
}
+
xwd $imagedir/${test_image}.png
-if { $mist < 1 } {
- if { [catch { Close D_Second } catch_result] } {
- puts "Error : cannot close a document D_Second"
- }
+
+set info [whatis D_Second]
+if { ${info} == "D_Second is a TDocStd_Document"} {
+ if { [catch { Close D_Second } catch_result] } {
+ puts "Error : cannot close a document D_Second"
+ }
}
+
set ProductMode ON
puts "TEST COMPLETED"
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename lh93wsddr3370z3.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 347 ( 9072 ) Summary = 347 ( 9072 )
-CHECKSHAPE : Wires = 1 ( 1 ) Faces = 1 ( 1 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 673 ( 673 ) Summary = 15005 ( 15001 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 673 ( 673 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 6844 ( 6844 )
-TOLERANCE : MaxTol = 0.1926431182 ( 0.1926431182 ) AvgTol = 0.0001429249224 ( 0.0001405928641 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 9135 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 1 -max_faces 1 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 673 -shape 15001
+checkstatshape res_1 -solid 0 -shell 0 -face 673 -freewire 0 -freeedge 0 -sharededge 6844
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.1926431182 -avg 0.0001405928641]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 9135 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 352 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 1 -max_faces 1 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 1 -max_faces 1 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 673 -shape 15005 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 673 -freewire 0 -freeedge 0 -sharededge 6844 -max_solid 0 -max_shell 0 -max_face 673 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.1926431182 -avg 0.0001429249224 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename buc40130.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 1 ) Summary = 0 ( 1 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 38 ( 38 ) Summary = 38 ( 38 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 3312 ( 3312 ) Summary = 38865 ( 38865 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 3312 ( 3312 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 15941 ( 15941 )
-TOLERANCE : MaxTol = 0.9010557082 ( 0.9010557089 ) AvgTol = 0.005653402654 ( 0.005653402896 )
-LABELS : N0Labels = 3312 ( 3312 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 3312 ( 3312 ) NameLabels = 3312 ( 3312 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 54 -max_faults 0
+checkxstat D_First -n0 3312 -n1 0 -n2 0 -total 3312 -withname 3312 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 3312 -shape 38865
+checkstatshape res_1 -solid 0 -shell 0 -face 3312 -freewire 0 -freeedge 0 -sharededge 15941
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.9010557089 -avg 0.005653402896]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 54 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 38 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3312 -n1 0 -n2 0 -total 3312 -withname 3312 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3312 -n1 0 -n2 0 -total 3312 -withname 3312 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 3312 -shape 38865 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 3312 -freewire 0 -freeedge 0 -sharededge 15941 -max_solid 0 -max_shell 0 -max_face 3312 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.9010557082 -avg 0.005653402654 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename marteau.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 25 ( 224 ) Summary = 25 ( 224 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 45 ( 45 ) Summary = 2322 ( 2322 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 45 ( 45 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 1114 ( 1114 )
-TOLERANCE : MaxTol = 0.1574979916 ( 0.1574995582 ) AvgTol = 0.0008504409643 ( 0.0008526713095 )
-LABELS : N0Labels = 45 ( 45 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 45 ( 45 ) NameLabels = 45 ( 45 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 224 -max_faults 0
+checkxstat D_First -n0 45 -n1 0 -n2 0 -total 45 -withname 45 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 45 -shape 2322
+checkstatshape res_1 -solid 0 -shell 0 -face 45 -freewire 0 -freeedge 0 -sharededge 1114
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.1574995582 -avg 0.0008526713095]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 224 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 25 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 45 -n1 0 -n2 0 -total 45 -withname 45 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 45 -n1 0 -n2 0 -total 45 -withname 45 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 45 -shape 2322 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 45 -freewire 0 -freeedge 0 -sharededge 1114 -max_solid 0 -max_shell 0 -max_face 45 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.1574979916 -avg 0.0008504409643 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename matinf.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 685 ( 685 ) Summary = 8193 ( 8193 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 685 ( 685 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 3418 ( 3418 )
-TOLERANCE : MaxTol = 0.7975995425 ( 0.7975995425 ) AvgTol = 0.01318864138 ( 0.01318867194 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 685 -shape 8193
+checkstatshape res_1 -solid 0 -shell 0 -face 685 -freewire 0 -freeedge 0 -sharededge 3418
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.7975995425 -avg 0.01318867194]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 685 -shape 8193 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 685 -freewire 0 -freeedge 0 -sharededge 3418 -max_solid 0 -max_shell 0 -max_face 685 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.7975995425 -avg 0.01318864138 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename poininfo.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 605 ( 605 ) Summary = 7234 ( 7234 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 605 ( 605 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 3018 ( 3018 )
-TOLERANCE : MaxTol = 0.797599617 ( 0.797599617 ) AvgTol = 0.01440213795 ( 0.01440217257 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 605 -shape 7234
+checkstatshape res_1 -solid 0 -shell 0 -face 605 -freewire 0 -freeedge 0 -sharededge 3018
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.797599617 -avg 0.01440217257]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 605 -shape 7234 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 605 -freewire 0 -freeedge 0 -sharededge 3018 -max_solid 0 -max_shell 0 -max_face 605 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.797599617 -avg 0.01440213795 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename s01.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 15 ) Summary = 0 ( 15 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 1416 ( 1416 ) Summary = 16123 ( 16125 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 1416 ( 1416 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 6652 ( 6652 )
-TOLERANCE : MaxTol = 0.9671829226 ( 0.9671829226 ) AvgTol = 0.01310886995 ( 0.01310984483 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 28 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 1416 -shape 16125
+checkstatshape res_1 -solid 0 -shell 0 -face 1416 -freewire 0 -freeedge 0 -sharededge 6652
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.9671829226 -avg 0.01310984483]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 28 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 1416 -shape 16123 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 1416 -freewire 0 -freeedge 0 -sharededge 6652 -max_solid 0 -max_shell 0 -max_face 1416 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.9671829226 -avg 0.01310886995 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TOLERANCE : Faulty"
-
set filename sample_diff_data_1.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 26 ) Summary = 0 ( 26 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 455 ( 455 ) Summary = 5485 ( 5485 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 455 ( 455 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 2295 ( 2295 )
-TOLERANCE : MaxTol = 0.007446262663 ( 0.00733072557 ) AvgTol = 1.638173079e-005 ( 1.01902787e-005 )
-LABELS : N0Labels = 455 ( 455 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 455 ( 455 ) NameLabels = 455 ( 455 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 26 -max_faults 0
+checkxstat D_First -n0 455 -n1 0 -n2 0 -total 455 -withname 455 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 455 -shape 5485
+checkstatshape res_1 -solid 0 -shell 0 -face 455 -freewire 0 -freeedge 0 -sharededge 2295
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.00733072557 -avg 1.01902787e-005]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 26 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 455 -n1 0 -n2 0 -total 455 -withname 455 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 455 -n1 0 -n2 0 -total 455 -withname 455 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 455 -shape 5485 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 455 -freewire 0 -freeedge 0 -sharededge 2295 -max_solid 0 -max_shell 0 -max_face 455 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.007446262663 -avg 1.638173079e-005 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename sim1.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 8 ) Summary = 0 ( 8 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 954 ( 954 ) Summary = 15756 ( 15781 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 954 ( 954 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 6942 ( 6942 )
-TOLERANCE : MaxTol = 0.9723189972 ( 0.9723189972 ) AvgTol = 0.007899165806 ( 0.007903307507 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 9 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 954 -shape 15781
+checkstatshape res_1 -solid 0 -shell 0 -face 954 -freewire 0 -freeedge 0 -sharededge 6942
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.9723189972 -avg 0.007903307507]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 9 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 954 -shape 15756 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 954 -freewire 0 -freeedge 0 -sharededge 6942 -max_solid 0 -max_shell 0 -max_face 954 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.9723189972 -avg 0.007899165806 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename sim2.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 2 ) Summary = 0 ( 2 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 463 ( 463 ) Summary = 7827 ( 7878 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 463 ( 463 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 3443 ( 3443 )
-TOLERANCE : MaxTol = 0.9681628245 ( 0.9681628245 ) AvgTol = 0.01970986694 ( 0.01971354546 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 463 -shape 7878
+checkstatshape res_1 -solid 0 -shell 0 -face 463 -freewire 0 -freeedge 0 -sharededge 3443
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.9681628245 -avg 0.01971354546]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 463 -shape 7827 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 463 -freewire 0 -freeedge 0 -sharededge 3443 -max_solid 0 -max_shell 0 -max_face 463 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.9681628245 -avg 0.01970986694 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename usi105.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 2 ) Summary = 0 ( 2 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 1137 ( 1137 ) Summary = 14699 ( 14702 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 1137 ( 1137 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 6228 ( 6228 )
-TOLERANCE : MaxTol = 0.9916912901 ( 0.9916912901 ) AvgTol = 0.04552765692 ( 0.04552789906 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 1137 -shape 14702
+checkstatshape res_1 -solid 0 -shell 0 -face 1137 -freewire 0 -freeedge 0 -sharededge 6228
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.9916912901 -avg 0.04552789906]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 1137 -shape 14699 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 1137 -freewire 0 -freeedge 0 -sharededge 6228 -max_solid 0 -max_shell 0 -max_face 1137 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.9916912901 -avg 0.04552765692 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename BUC50025.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 7 ( 7 ) Summary = 71 ( 71 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 7 ( 7 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 28 ( 28 )
-TOLERANCE : MaxTol = 1e-007 ( 1e-007 ) AvgTol = 1e-007 ( 1e-007 )
-LABELS : N0Labels = 7 ( 7 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 7 ( 7 ) NameLabels = 7 ( 7 ) ColorLabels = 7 ( 7 ) LayerLabels = 7 ( 7 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = YELLOW ( YELLOW )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 1 ( 1 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 7 -n1 0 -n2 0 -total 7 -withname 7 -withcolor 7 -withlayer 7 -centroid 0 -volume 0 -area 0 -colors { YELLOW } -nbcolors 1 -layers { 1 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 7 -shape 71
+checkstatshape res_1 -solid 0 -shell 0 -face 7 -freewire 0 -freeedge 0 -sharededge 28
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-007 -avg 1e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 7 -n1 0 -n2 0 -total 7 -withname 7 -withcolor 7 -withlayer 7 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 7 -n1 0 -n2 0 -total 7 -withname 7 -withcolor 7 -withlayer 7 -centroid 0 -volume 0 -area 0 -colors { YELLOW } -nbcolors 1 -layers { 1 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 7 -shape 71 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 7 -freewire 0 -freeedge 0 -sharededge 28 -max_solid 0 -max_shell 0 -max_face 7 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1e-007 -avg 1e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename BUC50047.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 1 ) Summary = 0 ( 1 )
-TPSTAT : Faulties = 0 ( 2 ) Warnings = 49 ( 109 ) Summary = 49 ( 111 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 102 ( 102 ) Summary = 2277 ( 2277 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 102 ( 102 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 1027 ( 1027 )
-TOLERANCE : MaxTol = 0.9428103106 ( 0.9428103191 ) AvgTol = 0.04703881931 ( 0.04704464574 )
-LABELS : N0Labels = 102 ( 102 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 102 ( 102 ) NameLabels = 102 ( 102 ) ColorLabels = 0 ( 0 ) LayerLabels = 102 ( 102 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 1 ( 1 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 109 -max_faults 2
+checkxstat D_First -n0 102 -n1 0 -n2 0 -total 102 -withname 102 -withcolor 0 -withlayer 102 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { 1 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 102 -shape 2277
+checkstatshape res_1 -solid 0 -shell 0 -face 102 -freewire 0 -freeedge 0 -sharededge 1027
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.9428103191 -avg 0.04704464574]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 109 -max_faults 2
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 49 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 102 -n1 0 -n2 0 -total 102 -withname 102 -withcolor 0 -withlayer 102 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 102 -n1 0 -n2 0 -total 102 -withname 102 -withcolor 0 -withlayer 102 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { 1 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 102 -shape 2277 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 102 -freewire 0 -freeedge 0 -sharededge 1027 -max_solid 0 -max_shell 0 -max_face 102 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.9428103106 -avg 0.04703881931 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
-set LinuxDiff 1
set filename t500core.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 169 ( 430 ) Summary = 169 ( 430 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 674 ( 674 ) Summary = 9627 ( 9625 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 674 ( 674 ) FreeWire = 0 ( 0 ) FreeEdge = 28 ( 28 ) SharedEdge = 4104 ( 4104 )
-TOLERANCE : MaxTol = 0.483503583 ( 0.4835035831 ) AvgTol = 0.00303544578 ( 0.003024564929 )
-LABELS : N0Labels = 702 ( 702 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 702 ( 702 ) NameLabels = 702 ( 702 ) ColorLabels = 16 ( 16 ) LayerLabels = 702 ( 702 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = WHITE ( WHITE )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 115 ( 115 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 444 -max_faults 0
+checkxstat D_First -n0 702 -n1 0 -n2 0 -total 702 -withname 702 -withcolor 16 -withlayer 702 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { 115 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 674 -shape 9625
+checkstatshape res_1 -solid 0 -shell 0 -face 674 -freewire 0 -freeedge 28 -sharededge 4104
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.4835035831 -avg 0.003024564929]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 444 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 169 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 702 -n1 0 -n2 0 -total 702 -withname 702 -withcolor 16 -withlayer 702 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 702 -n1 0 -n2 0 -total 702 -withname 702 -withcolor 16 -withlayer 702 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { 115 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 674 -shape 9627 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 674 -freewire 0 -freeedge 28 -sharededge 4104 -max_solid 0 -max_shell 0 -max_face 674 -max_freewire 0 -max_freeedge 28
+checkmaxtol res_2 -tol 0.483503583 -avg 0.00303544578 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename BUC60113.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 266 ( 266 ) Summary = 2940 ( 2940 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 266 ( 266 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 1202 ( 1202 )
-TOLERANCE : MaxTol = 0.9647320607 ( 0.9647320724 ) AvgTol = 0.09372541107 ( 0.09372566113 )
-LABELS : N0Labels = 266 ( 266 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 266 ( 266 ) NameLabels = 266 ( 266 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 266 -n1 0 -n2 0 -total 266 -withname 266 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 266 -shape 2940
+checkstatshape res_1 -solid 0 -shell 0 -face 266 -freewire 0 -freeedge 0 -sharededge 1202
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.9647320724 -avg 0.09372566113]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 266 -n1 0 -n2 0 -total 266 -withname 266 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 266 -n1 0 -n2 0 -total 266 -withname 266 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 266 -shape 2940 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 266 -freewire 0 -freeedge 0 -sharededge 1202 -max_solid 0 -max_shell 0 -max_face 266 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.9647320607 -avg 0.09372541107 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
-
set filename CTS18314.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 1 ) Summary = 0 ( 1 )
-TPSTAT : Faulties = 0 ( 10 ) Warnings = 308 ( 102 ) Summary = 308 ( 112 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 2 ) Solids = 0 ( 2 )
-NBSHAPES : Solid = 0 ( 30 ) Shell = 0 ( 30 ) Face = 390 ( 390 ) Summary = 4699 ( 2569 )
-STATSHAPE : Solid = 0 ( 30 ) Shell = 0 ( 30 ) Face = 390 ( 390 ) FreeWire = 0 ( 0 ) FreeEdge = 50 ( 50 ) SharedEdge = 1908 ( 994 )
-TOLERANCE : MaxTol = 0.03576190045 ( 0.03576190009 ) AvgTol = 8.617003044e-005 ( 0.0003710073065 )
-LABELS : N0Labels = 108 ( 108 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 108 ( 108 ) NameLabels = 108 ( 108 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 37 -max_faults 0
+checkdoc "tpstat c" -max_warns 102 -max_faults 10
+checkxstat D_First -n0 108 -n1 0 -n2 0 -total 108 -withname 108 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 2 -max_solids 2
+checknbshapes res_1 -solid 30 -shell 30 -face 390 -shape 2569
+checkstatshape res_1 -solid 30 -shell 30 -face 390 -freewire 0 -freeedge 50 -sharededge 994
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.03576190009 -avg 0.0003710073065]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 37 -max_faults 0
+checkdoc "tpstat c" -max_warns 102 -max_faults 10
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 308 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 108 -n1 0 -n2 0 -total 108 -withname 108 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 108 -n1 0 -n2 0 -total 108 -withname 108 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 2 -max_solids 2
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 390 -shape 4699 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 390 -freewire 0 -freeedge 50 -sharededge 1908 -max_solid 30 -max_shell 30 -max_face 390 -max_freewire 0 -max_freeedge 50
+checkmaxtol res_2 -tol 0.03576190045 -avg 8.617003044e-005 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename CTS18542-1.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 1 ) Summary = 0 ( 1 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 1 ( 1 ) Summary = 1 ( 1 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 277 ( 277 ) Summary = 3519 ( 3519 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 277 ( 277 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 1482 ( 1482 )
-TOLERANCE : MaxTol = 9.977163954e-006 ( 1e-005 ) AvgTol = 2.196639253e-006 ( 9.404700402e-006 )
-LABELS : N0Labels = 277 ( 277 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 277 ( 277 ) NameLabels = 277 ( 277 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 5 -max_faults 0
+checkxstat D_First -n0 277 -n1 0 -n2 0 -total 277 -withname 277 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 277 -shape 3519
+checkstatshape res_1 -solid 0 -shell 0 -face 277 -freewire 0 -freeedge 0 -sharededge 1482
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-005 -avg 9.404700402e-006]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 5 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 277 -n1 0 -n2 0 -total 277 -withname 277 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 277 -n1 0 -n2 0 -total 277 -withname 277 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 277 -shape 3519 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 277 -freewire 0 -freeedge 0 -sharededge 1482 -max_solid 0 -max_shell 0 -max_face 277 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 9.977163954e-006 -avg 2.196639253e-006 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
-
set filename CTS18542-2.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 1 ) Summary = 0 ( 1 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 133 ( 131 ) Summary = 133 ( 131 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 1071 ( 1071 ) Summary = 14484 ( 14484 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 1071 ( 1071 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 6154 ( 6154 )
-TOLERANCE : MaxTol = 0.9959055336 ( 0.995905536 ) AvgTol = 0.05477448992 ( 0.05477462971 )
-LABELS : N0Labels = 1071 ( 1071 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1071 ( 1071 ) NameLabels = 1071 ( 1071 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 144 -max_faults 0
+checkxstat D_First -n0 1071 -n1 0 -n2 0 -total 1071 -withname 1071 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 1071 -shape 14484
+checkstatshape res_1 -solid 0 -shell 0 -face 1071 -freewire 0 -freeedge 0 -sharededge 6154
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.995905536 -avg 0.05477462971]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 144 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 135 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1071 -n1 0 -n2 0 -total 1071 -withname 1071 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1071 -n1 0 -n2 0 -total 1071 -withname 1071 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 1071 -shape 14484 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 1071 -freewire 0 -freeedge 0 -sharededge 6154 -max_solid 0 -max_shell 0 -max_face 1071 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.9959055336 -avg 0.05477448992 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
-
set filename CTS18544.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 1 ) Summary = 0 ( 1 )
-TPSTAT : Faulties = 0 ( 2 ) Warnings = 20 ( 17 ) Summary = 20 ( 19 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 2430 ( 2430 ) Summary = 29945 ( 29945 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 2430 ( 2430 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 12543 ( 12543 )
-TOLERANCE : MaxTol = 0.9991343001 ( 0.9991342868 ) AvgTol = 0.02628258487 ( 0.0262828129 )
-LABELS : N0Labels = 2430 ( 2430 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 2430 ( 2430 ) NameLabels = 2430 ( 2430 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 18 -max_faults 2
+checkxstat D_First -n0 2430 -n1 0 -n2 0 -total 2430 -withname 2430 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 2430 -shape 29945
+checkstatshape res_1 -solid 0 -shell 0 -face 2430 -freewire 0 -freeedge 0 -sharededge 12543
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.9991342868 -avg 0.0262828129]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 18 -max_faults 2
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 33 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 2430 -n1 0 -n2 0 -total 2430 -withname 2430 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 2430 -n1 0 -n2 0 -total 2430 -withname 2430 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 2430 -shape 29945 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 2430 -freewire 0 -freeedge 0 -sharededge 12543 -max_solid 0 -max_shell 0 -max_face 2430 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.9991343001 -avg 0.02628258487 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename CTS18635-1.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 6 ) Summary = 0 ( 6 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 34 ( 34 ) Summary = 427 ( 427 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 34 ( 34 ) FreeWire = 0 ( 0 ) FreeEdge = 1 ( 1 ) SharedEdge = 177 ( 177 )
-TOLERANCE : MaxTol = 0.9671317357 ( 0.9671317236 ) AvgTol = 0.0492708189 ( 0.04927174141 )
-LABELS : N0Labels = 2 ( 2 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 2 ( 2 ) NameLabels = 2 ( 2 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 6 -max_faults 0
+checkxstat D_First -n0 2 -n1 0 -n2 0 -total 2 -withname 2 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 34 -shape 427
+checkstatshape res_1 -solid 0 -shell 0 -face 34 -freewire 0 -freeedge 1 -sharededge 177
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.9671317236 -avg 0.04927174141]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 6 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 2 -n1 0 -n2 0 -total 2 -withname 2 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 2 -n1 0 -n2 0 -total 2 -withname 2 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 34 -shape 427 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 34 -freewire 0 -freeedge 1 -sharededge 177 -max_solid 0 -max_shell 0 -max_face 34 -max_freewire 0 -max_freeedge 1
+checkmaxtol res_2 -tol 0.9671317357 -avg 0.0492708189 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename CTS18635-2.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 34 ( 34 ) Summary = 407 ( 407 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 34 ( 34 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 168 ( 168 )
-TOLERANCE : MaxTol = 0.9671317357 ( 0.9671317236 ) AvgTol = 0.0517427016 ( 0.05174271535 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 34 -shape 407
+checkstatshape res_1 -solid 0 -shell 0 -face 34 -freewire 0 -freeedge 0 -sharededge 168
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.9671317236 -avg 0.05174271535]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 34 -shape 407 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 34 -freewire 0 -freeedge 0 -sharededge 168 -max_solid 0 -max_shell 0 -max_face 34 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.9671317357 -avg 0.0517427016 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename CTS18635-3.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 6 ( 24 ) Summary = 6 ( 24 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 48 ( 48 ) Summary = 1043 ( 1043 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 48 ( 48 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 473 ( 473 )
-TOLERANCE : MaxTol = 0.9965425609 ( 0.9965425534 ) AvgTol = 0.01070529537 ( 0.01071062866 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 24 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 48 -shape 1043
+checkstatshape res_1 -solid 0 -shell 0 -face 48 -freewire 0 -freeedge 0 -sharededge 473
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.9965425534 -avg 0.01071062866]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 24 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 6 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 48 -shape 1043 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 48 -freewire 0 -freeedge 0 -sharededge 473 -max_solid 0 -max_shell 0 -max_face 48 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.9965425609 -avg 0.01070529537 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename CTS18635-4.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 6 ( 20 ) Summary = 6 ( 20 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 48 ( 48 ) Summary = 605 ( 605 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 48 ( 48 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 254 ( 254 )
-TOLERANCE : MaxTol = 0.9965425609 ( 0.9965425534 ) AvgTol = 0.01938808773 ( 0.0193884753 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 20 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 48 -shape 605
+checkstatshape res_1 -solid 0 -shell 0 -face 48 -freewire 0 -freeedge 0 -sharededge 254
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.9965425534 -avg 0.0193884753]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 20 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 6 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 48 -shape 605 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 48 -freewire 0 -freeedge 0 -sharededge 254 -max_solid 0 -max_shell 0 -max_face 48 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.9965425609 -avg 0.01938808773 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename CTS18953.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 14 ( 14 ) Summary = 173 ( 173 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 14 ( 14 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 72 ( 72 )
-TOLERANCE : MaxTol = 4.0002e-005 ( 4.0002e-005 ) AvgTol = 3.127982218e-006 ( 3.127982218e-006 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 14 -shape 173
+checkstatshape res_1 -solid 0 -shell 0 -face 14 -freewire 0 -freeedge 0 -sharededge 72
+set max_tol_res_1 [checkmaxtol res_1 -tol 4.0002e-005 -avg 3.127982218e-006]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 14 -shape 173 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 14 -freewire 0 -freeedge 0 -sharededge 72 -max_solid 0 -max_shell 0 -max_face 14 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 4.0002e-005 -avg 3.127982218e-006 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename CTS19582.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 13 ) Summary = 0 ( 13 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 152 ( 152 ) Summary = 2080 ( 2080 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 152 ( 152 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 889 ( 889 )
-TOLERANCE : MaxTol = 0.9363734225 ( 0.9363734225 ) AvgTol = 0.04721503286 ( 0.04721548297 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 19 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 152 -shape 2080
+checkstatshape res_1 -solid 0 -shell 0 -face 152 -freewire 0 -freeedge 0 -sharededge 889
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.9363734225 -avg 0.04721548297]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 19 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 152 -shape 2080 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 152 -freewire 0 -freeedge 0 -sharededge 889 -max_solid 0 -max_shell 0 -max_face 152 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.9363734225 -avg 0.04721503286 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename CTS21136.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 106 ( 536 ) Summary = 106 ( 536 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 206 ( 206 ) Summary = 3950 ( 3950 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 206 ( 206 ) FreeWire = 0 ( 0 ) FreeEdge = 4 ( 4 ) SharedEdge = 1760 ( 1760 )
-TOLERANCE : MaxTol = 0.2688118771 ( 0.2688118774 ) AvgTol = 0.0006626012546 ( 0.0006624636278 )
-LABELS : N0Labels = 210 ( 210 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 210 ( 210 ) NameLabels = 210 ( 210 ) ColorLabels = 210 ( 210 ) LayerLabels = 210 ( 210 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 7 ( 7 )
-COLORS : Colors = BURLYWOOD1 DARKORANGE DEEPSKYBLUE1 GRAY79 MAGENTA1 MEDIUMSPRINGGREEN WHITE ( BURLYWOOD1 DARKORANGE DEEPSKYBLUE1 GRAY79 MAGENTA1 MEDIUMSPRINGGREEN WHITE )
-NLAYERS : NLayers = 10 ( 10 )
-LAYERS : Layers = 2 3 4 50 52 53 54 55 58 59 ( 2 3 4 50 52 53 54 55 58 59 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 536 -max_faults 0
+checkxstat D_First -n0 210 -n1 0 -n2 0 -total 210 -withname 210 -withcolor 210 -withlayer 210 -centroid 0 -volume 0 -area 0 -colors { BURLYWOOD1 DARKORANGE DEEPSKYBLUE1 GRAY79 MAGENTA1 MEDIUMSPRINGGREEN WHITE } -nbcolors 7 -layers { 2 3 4 50 52 53 54 55 58 59 } -nblayers 10
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 206 -shape 3950
+checkstatshape res_1 -solid 0 -shell 0 -face 206 -freewire 0 -freeedge 4 -sharededge 1760
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.2688118774 -avg 0.0006624636278]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 536 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 106 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 210 -n1 0 -n2 0 -total 210 -withname 210 -withcolor 210 -withlayer 210 -centroid 0 -volume 0 -area 0 -nbcolors 7 -nblayers 10
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 210 -n1 0 -n2 0 -total 210 -withname 210 -withcolor 210 -withlayer 210 -centroid 0 -volume 0 -area 0 -colors { BURLYWOOD1 DARKORANGE DEEPSKYBLUE1 GRAY79 MAGENTA1 MEDIUMSPRINGGREEN WHITE } -nbcolors 7 -layers { 2 3 4 50 52 53 54 55 58 59 } -nblayers 10
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 206 -shape 3950 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 206 -freewire 0 -freeedge 4 -sharededge 1760 -max_solid 0 -max_shell 0 -max_face 206 -max_freewire 0 -max_freeedge 4
+checkmaxtol res_2 -tol 0.2688118771 -avg 0.0006626012546 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename CTS21866.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 1 ) Summary = 0 ( 1 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 82 ( 85 ) Summary = 82 ( 85 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 1459 ( 1459 ) Summary = 19160 ( 19160 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 1459 ( 1459 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 8093 ( 8093 )
-TOLERANCE : MaxTol = 0.9346509485 ( 0.9346509437 ) AvgTol = 0.02356731391 ( 0.02356733517 )
-LABELS : N0Labels = 1459 ( 1459 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1459 ( 1459 ) NameLabels = 1459 ( 1459 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 11531 -max_faults 0
+checkdoc "tpstat c" -max_warns 92 -max_faults 0
+checkxstat D_First -n0 1459 -n1 0 -n2 0 -total 1459 -withname 1459 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 1459 -shape 19160
+checkstatshape res_1 -solid 0 -shell 0 -face 1459 -freewire 0 -freeedge 0 -sharededge 8093
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.9346509437 -avg 0.02356733517]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 11531 -max_faults 0
+checkdoc "tpstat c" -max_warns 92 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 89 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1459 -n1 0 -n2 0 -total 1459 -withname 1459 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1459 -n1 0 -n2 0 -total 1459 -withname 1459 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 1459 -shape 19160 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 1459 -freewire 0 -freeedge 0 -sharededge 8093 -max_solid 0 -max_shell 0 -max_face 1459 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.9346509485 -avg 0.02356731391 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename CTS60168.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 2 ) Summary = 0 ( 2 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 9 ( 9 ) Summary = 166 ( 166 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 9 ( 9 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 73 ( 73 )
-TOLERANCE : MaxTol = 0.54574397 ( 0.5457439747 ) AvgTol = 0.06954487896 ( 0.06954487788 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 9 -shape 166
+checkstatshape res_1 -solid 0 -shell 0 -face 9 -freewire 0 -freeedge 0 -sharededge 73
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.5457439747 -avg 0.06954487788]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 9 -shape 166 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 9 -freewire 0 -freeedge 0 -sharededge 73 -max_solid 0 -max_shell 0 -max_face 9 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.54574397 -avg 0.06954487896 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR25923 ALL: TPSTAT : Faulty"
set filename FRA60182.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 1 ( 2 ) Summary = 1 ( 2 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 1029 ( 1029 ) Summary = 14017 ( 14019 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 1029 ( 1029 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 5991 ( 5989 )
-TOLERANCE : MaxTol = 0.9998969699 ( 0.9998969699 ) AvgTol = 0.03184826265 ( 0.03187529348 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 1029 -shape 14019
+checkstatshape res_1 -solid 0 -shell 0 -face 1029 -freewire 0 -freeedge 0 -sharededge 5989
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.9998969699 -avg 0.03187529348]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 5 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 1029 -shape 14017 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 1029 -freewire 0 -freeedge 0 -sharededge 5991 -max_solid 0 -max_shell 0 -max_face 1029 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.9998969699 -avg 0.03184826265 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename GER61123-1.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 2 ) Summary = 0 ( 2 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 519 ( 519 ) Summary = 6139 ( 6139 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 519 ( 519 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 2502 ( 2502 )
-TOLERANCE : MaxTol = 0.8632897705 ( 0.8632897802 ) AvgTol = 0.04019572889 ( 0.0401958388 )
-LABELS : N0Labels = 519 ( 519 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 519 ( 519 ) NameLabels = 519 ( 519 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+checkxstat D_First -n0 519 -n1 0 -n2 0 -total 519 -withname 519 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 519 -shape 6139
+checkstatshape res_1 -solid 0 -shell 0 -face 519 -freewire 0 -freeedge 0 -sharededge 2502
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.8632897802 -avg 0.0401958388]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 519 -n1 0 -n2 0 -total 519 -withname 519 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 519 -n1 0 -n2 0 -total 519 -withname 519 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 519 -shape 6139 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 519 -freewire 0 -freeedge 0 -sharededge 2502 -max_solid 0 -max_shell 0 -max_face 519 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.8632897705 -avg 0.04019572889 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename GER61123-2.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 2 ) Summary = 0 ( 2 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 537 ( 537 ) Summary = 6497 ( 6497 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 537 ( 537 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 2655 ( 2655 )
-TOLERANCE : MaxTol = 0.9158783896 ( 0.9159699741 ) AvgTol = 0.08054961241 ( 0.08054975206 )
-LABELS : N0Labels = 537 ( 537 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 537 ( 537 ) NameLabels = 537 ( 537 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+checkxstat D_First -n0 537 -n1 0 -n2 0 -total 537 -withname 537 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 537 -shape 6497
+checkstatshape res_1 -solid 0 -shell 0 -face 537 -freewire 0 -freeedge 0 -sharededge 2655
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.9159699741 -avg 0.08054975206]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 537 -n1 0 -n2 0 -total 537 -withname 537 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 537 -n1 0 -n2 0 -total 537 -withname 537 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 537 -shape 6497 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 537 -freewire 0 -freeedge 0 -sharededge 2655 -max_solid 0 -max_shell 0 -max_face 537 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.9158783896 -avg 0.08054961241 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename ITA60277.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 0 ( 0 ) Summary = 9 ( 9 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 0 ( 0 ) FreeWire = 1 ( 1 ) FreeEdge = 4 ( 4 ) SharedEdge = 4 ( 4 )
-TOLERANCE : MaxTol = 1e-007 ( 1e-007 ) AvgTol = 1e-007 ( 1e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 0 -shape 9
+checkstatshape res_1 -solid 0 -shell 0 -face 0 -freewire 1 -freeedge 4 -sharededge 4
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-007 -avg 1e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 0 -shape 9 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 0 -freewire 1 -freeedge 4 -sharededge 4 -max_solid 0 -max_shell 0 -max_face 0 -max_freewire 1 -max_freeedge 4
+checkmaxtol res_2 -tol 1e-007 -avg 1e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename NIC_file5.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 1 ( 1 ) Summary = 8 ( 8 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 1 ( 1 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 4 ( 4 )
-TOLERANCE : MaxTol = 2.287521146e-007 ( 2.287522163e-007 ) AvgTol = 1.556878604e-007 ( 1.550159841e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 1 -shape 8
+checkstatshape res_1 -solid 0 -shell 0 -face 1 -freewire 0 -freeedge 0 -sharededge 4
+set max_tol_res_1 [checkmaxtol res_1 -tol 2.287522163e-007 -avg 1.550159841e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 1 -shape 8 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 1 -freewire 0 -freeedge 0 -sharededge 4 -max_solid 0 -max_shell 0 -max_face 1 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 2.287521146e-007 -avg 1.556878604e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename PRO10629.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 320 ) Summary = 0 ( 320 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 192 ( 192 ) Summary = 8447 ( 8447 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 192 ( 192 ) FreeWire = 0 ( 0 ) FreeEdge = 6 ( 6 ) SharedEdge = 4028 ( 4028 )
-TOLERANCE : MaxTol = 1.001437005e-005 ( 1e-005 ) AvgTol = 1.823426864e-006 ( 9.520967742e-006 )
-LABELS : N0Labels = 198 ( 198 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 198 ( 198 ) NameLabels = 198 ( 198 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 321 -max_faults 0
+checkxstat D_First -n0 198 -n1 0 -n2 0 -total 198 -withname 198 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 192 -shape 8447
+checkstatshape res_1 -solid 0 -shell 0 -face 192 -freewire 0 -freeedge 6 -sharededge 4028
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-005 -avg 9.520967742e-006]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 321 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 198 -n1 0 -n2 0 -total 198 -withname 198 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 198 -n1 0 -n2 0 -total 198 -withname 198 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 192 -shape 8447 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 192 -freewire 0 -freeedge 6 -sharededge 4028 -max_solid 0 -max_shell 0 -max_face 192 -max_freewire 0 -max_freeedge 6
+checkmaxtol res_2 -tol 1.001437005e-005 -avg 1.823426864e-006 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
-
set filename CTS21884.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 1 ) Summary = 0 ( 1 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 129 ( 71 ) Summary = 129 ( 71 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 1 ) Shell = 0 ( 1 ) Face = 180 ( 180 ) Summary = 2185 ( 1096 )
-STATSHAPE : Solid = 0 ( 1 ) Shell = 0 ( 1 ) Face = 180 ( 180 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 912 ( 457 )
-TOLERANCE : MaxTol = 0.04953179108 ( 0.04952733504 ) AvgTol = 0.005022224409 ( 0.01224482043 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 180 ( 180 ) N2Labels = 0 ( 0 ) TotalLabels = 181 ( 181 ) NameLabels = 181 ( 181 ) ColorLabels = 180 ( 180 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = WHITE ( WHITE )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 71 -max_faults 0
+checkxstat D_First -n0 1 -n1 180 -n2 0 -total 181 -withname 181 -withcolor 180 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 180 -shape 1096
+checkstatshape res_1 -solid 1 -shell 1 -face 180 -freewire 0 -freeedge 0 -sharededge 457
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.04952733504 -avg 0.01224482043]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 71 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 122 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 180 -n2 0 -total 181 -withname 181 -withcolor 180 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 180 -n2 0 -total 181 -withname 181 -withcolor 180 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 180 -shape 2185 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 180 -freewire 0 -freeedge 0 -sharededge 912 -max_solid 1 -max_shell 1 -max_face 180 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.04953179108 -avg 0.005022224409 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename PRO18762.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 1 ) Summary = 0 ( 1 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 189 ( 189 ) Summary = 2471 ( 2471 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 189 ( 189 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 1047 ( 1047 )
-TOLERANCE : MaxTol = 0.9674930965 ( 0.9674931058 ) AvgTol = 0.07394156089 ( 0.07394139392 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 189 -shape 2471
+checkstatshape res_1 -solid 0 -shell 0 -face 189 -freewire 0 -freeedge 0 -sharededge 1047
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.9674931058 -avg 0.07394139392]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 189 -shape 2471 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 189 -freewire 0 -freeedge 0 -sharededge 1047 -max_solid 0 -max_shell 0 -max_face 189 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.9674930965 -avg 0.07394156089 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename REN20001.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 1 ( 1 ) Summary = 12 ( 12 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 1 ( 1 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 5 ( 5 )
-TOLERANCE : MaxTol = 0.1038480255 ( 0.1038478805 ) AvgTol = 0.08956664418 ( 0.08956767442 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 1 -shape 12
+checkstatshape res_1 -solid 0 -shell 0 -face 1 -freewire 0 -freeedge 0 -sharededge 5
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.1038478805 -avg 0.08956767442]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 1 -shape 12 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 1 -freewire 0 -freeedge 0 -sharededge 5 -max_solid 0 -max_shell 0 -max_face 1 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.1038480255 -avg 0.08956664418 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename Rough_1.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 168 ) Summary = 0 ( 168 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 2136 ( 2136 ) Summary = 24367 ( 24367 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 2136 ( 2136 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 10058 ( 10058 )
-TOLERANCE : MaxTol = 0.05529392 ( 0.05529391994 ) AvgTol = 0.0003644351093 ( 0.0003640919991 )
-LABELS : N0Labels = 2136 ( 2136 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 2136 ( 2136 ) NameLabels = 2136 ( 2136 ) ColorLabels = 2136 ( 2136 ) LayerLabels = 2136 ( 2136 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 3 ( 3 )
-COLORS : Colors = BLACK CYAN1 YELLOW ( BLACK CYAN1 YELLOW )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 1 ( 1 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 178 -max_faults 0
+checkxstat D_First -n0 2136 -n1 0 -n2 0 -total 2136 -withname 2136 -withcolor 2136 -withlayer 2136 -centroid 0 -volume 0 -area 0 -colors { BLACK CYAN1 YELLOW } -nbcolors 3 -layers { 1 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 2136 -shape 24367
+checkstatshape res_1 -solid 0 -shell 0 -face 2136 -freewire 0 -freeedge 0 -sharededge 10058
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.05529391994 -avg 0.0003640919991]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 178 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 8 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 2136 -n1 0 -n2 0 -total 2136 -withname 2136 -withcolor 2136 -withlayer 2136 -centroid 0 -volume 0 -area 0 -nbcolors 3 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 2136 -n1 0 -n2 0 -total 2136 -withname 2136 -withcolor 2136 -withlayer 2136 -centroid 0 -volume 0 -area 0 -colors { BLACK CYAN1 YELLOW } -nbcolors 3 -layers { 1 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 2136 -shape 24367 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 2136 -freewire 0 -freeedge 0 -sharededge 10058 -max_solid 0 -max_shell 0 -max_face 2136 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.05529392 -avg 0.0003644351093 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename Table20.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 1 ) Summary = 0 ( 1 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 8 ( 206 ) Summary = 8 ( 206 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 309 ( 309 ) Summary = 7205 ( 7205 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 309 ( 309 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 3274 ( 3274 )
-TOLERANCE : MaxTol = 0.9528326294 ( 0.952832627 ) AvgTol = 0.02908511465 ( 0.02909176809 )
-LABELS : N0Labels = 309 ( 309 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 309 ( 309 ) NameLabels = 309 ( 309 ) ColorLabels = 309 ( 309 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = GRAY ( GRAY )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 206 -max_faults 0
+checkxstat D_First -n0 309 -n1 0 -n2 0 -total 309 -withname 309 -withcolor 309 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { GRAY } -nbcolors 1 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 309 -shape 7205
+checkstatshape res_1 -solid 0 -shell 0 -face 309 -freewire 0 -freeedge 0 -sharededge 3274
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.952832627 -avg 0.02909176809]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 206 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 8 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 309 -n1 0 -n2 0 -total 309 -withname 309 -withcolor 309 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 309 -n1 0 -n2 0 -total 309 -withname 309 -withcolor 309 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { GRAY } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 309 -shape 7205 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 309 -freewire 0 -freeedge 0 -sharededge 3274 -max_solid 0 -max_shell 0 -max_face 309 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.9528326294 -avg 0.02908511465 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename carfender.igs
-set ref_data {
-DATA : Faulties = 0 ( 1 ) Warnings = 0 ( 0 ) Summary = 0 ( 1 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 12 ( 12 ) Summary = 127 ( 127 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 12 ( 12 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 51 ( 51 )
-TOLERANCE : MaxTol = 0.015577035 ( 0.015577035 ) AvgTol = 0.005229384693 ( 0.005229762271 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 1
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 12 -shape 127
+checkstatshape res_1 -solid 0 -shell 0 -face 12 -freewire 0 -freeedge 0 -sharededge 51
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.015577035 -avg 0.005229762271]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 1
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 12 -shape 127 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 12 -freewire 0 -freeedge 0 -sharededge 51 -max_solid 0 -max_shell 0 -max_face 12 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.015577035 -avg 0.005229384693 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename castest1.igs
-set ref_data {
-DATA : Faulties = 0 ( 1 ) Warnings = 0 ( 1 ) Summary = 0 ( 2 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 12 ( 12 ) Summary = 121 ( 121 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 12 ( 12 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 48 ( 48 )
-TOLERANCE : MaxTol = 1e-007 ( 1e-007 ) AvgTol = 1e-007 ( 1e-007 )
-LABELS : N0Labels = 12 ( 12 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 12 ( 12 ) NameLabels = 12 ( 12 ) ColorLabels = 12 ( 12 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = GRAY ( GRAY )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 1 -max_faults 1
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 12 -n1 0 -n2 0 -total 12 -withname 12 -withcolor 12 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { GRAY } -nbcolors 1 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 12 -shape 121
+checkstatshape res_1 -solid 0 -shell 0 -face 12 -freewire 0 -freeedge 0 -sharededge 48
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-007 -avg 1e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 1 -max_faults 1
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 12 -n1 0 -n2 0 -total 12 -withname 12 -withcolor 12 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 12 -n1 0 -n2 0 -total 12 -withname 12 -withcolor 12 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { GRAY } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 12 -shape 121 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 12 -freewire 0 -freeedge 0 -sharededge 48 -max_solid 0 -max_shell 0 -max_face 12 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1e-007 -avg 1e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename castest2.igs
-set ref_data {
-DATA : Faulties = 0 ( 1 ) Warnings = 0 ( 1 ) Summary = 0 ( 2 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 2 ( 2 ) Summary = 21 ( 21 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 2 ( 2 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 8 ( 8 )
-TOLERANCE : MaxTol = 1e-007 ( 1e-007 ) AvgTol = 1e-007 ( 1e-007 )
-LABELS : N0Labels = 2 ( 2 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 2 ( 2 ) NameLabels = 2 ( 2 ) ColorLabels = 2 ( 2 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = GRAY ( GRAY )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 1 -max_faults 1
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 2 -n1 0 -n2 0 -total 2 -withname 2 -withcolor 2 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { GRAY } -nbcolors 1 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 2 -shape 21
+checkstatshape res_1 -solid 0 -shell 0 -face 2 -freewire 0 -freeedge 0 -sharededge 8
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-007 -avg 1e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 1 -max_faults 1
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 2 -n1 0 -n2 0 -total 2 -withname 2 -withcolor 2 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 2 -n1 0 -n2 0 -total 2 -withname 2 -withcolor 2 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { GRAY } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 2 -shape 21 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 2 -freewire 0 -freeedge 0 -sharededge 8 -max_solid 0 -max_shell 0 -max_face 2 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1e-007 -avg 1e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename castest3a.igs
-set ref_data {
-DATA : Faulties = 0 ( 1 ) Warnings = 0 ( 1 ) Summary = 0 ( 2 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 1 ( 1 ) Summary = 10 ( 10 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 1 ( 1 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 4 ( 4 )
-TOLERANCE : MaxTol = 1e-007 ( 1e-007 ) AvgTol = 1e-007 ( 1e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = GRAY ( GRAY )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 1 -max_faults 1
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { GRAY } -nbcolors 1 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 1 -shape 10
+checkstatshape res_1 -solid 0 -shell 0 -face 1 -freewire 0 -freeedge 0 -sharededge 4
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-007 -avg 1e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 1 -max_faults 1
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { GRAY } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 1 -shape 10 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 1 -freewire 0 -freeedge 0 -sharededge 4 -max_solid 0 -max_shell 0 -max_face 1 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1e-007 -avg 1e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename compsolid.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 13 ( 13 ) Summary = 139 ( 141 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 13 ( 13 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 56 ( 56 )
-TOLERANCE : MaxTol = 1e-007 ( 1e-007 ) AvgTol = 1e-007 ( 1e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 13 -shape 141
+checkstatshape res_1 -solid 0 -shell 0 -face 13 -freewire 0 -freeedge 0 -sharededge 56
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-007 -avg 1e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 13 -shape 139 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 13 -freewire 0 -freeedge 0 -sharededge 56 -max_solid 0 -max_shell 0 -max_face 13 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1e-007 -avg 1e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename crapaud_corrupted.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 213 ( 213 ) Summary = 2333 ( 2333 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 213 ( 213 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 961 ( 961 )
-TOLERANCE : MaxTol = 0.005110402507 ( 0.005110402507 ) AvgTol = 0.0002970992888 ( 0.00029709923 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 213 -shape 2333
+checkstatshape res_1 -solid 0 -shell 0 -face 213 -freewire 0 -freeedge 0 -sharededge 961
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.005110402507 -avg 0.00029709923]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 213 -shape 2333 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 213 -freewire 0 -freeedge 0 -sharededge 961 -max_solid 0 -max_shell 0 -max_face 213 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.005110402507 -avg 0.0002970992888 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename fauteuil.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 130 ( 130 ) Summary = 1301 ( 1303 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 130 ( 130 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 520 ( 520 )
-TOLERANCE : MaxTol = 1e-007 ( 1e-007 ) AvgTol = 1e-007 ( 1e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 130 -shape 1303
+checkstatshape res_1 -solid 0 -shell 0 -face 130 -freewire 0 -freeedge 0 -sharededge 520
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-007 -avg 1e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 130 -shape 1301 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 130 -freewire 0 -freeedge 0 -sharededge 520 -max_solid 0 -max_shell 0 -max_face 130 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1e-007 -avg 1e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename holedbox.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 6 ( 6 ) Summary = 73 ( 73 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 6 ( 6 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 28 ( 28 )
-TOLERANCE : MaxTol = 1e-007 ( 1e-007 ) AvgTol = 1e-007 ( 1e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 6 -shape 73
+checkstatshape res_1 -solid 0 -shell 0 -face 6 -freewire 0 -freeedge 0 -sharededge 28
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-007 -avg 1e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 6 -shape 73 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 6 -freewire 0 -freeedge 0 -sharededge 28 -max_solid 0 -max_shell 0 -max_face 6 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1e-007 -avg 1e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename phone.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 68 ( 68 ) Summary = 679 ( 679 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 68 ( 68 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 272 ( 272 )
-TOLERANCE : MaxTol = 1e-007 ( 1e-007 ) AvgTol = 1e-007 ( 1e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 68 -shape 679
+checkstatshape res_1 -solid 0 -shell 0 -face 68 -freewire 0 -freeedge 0 -sharededge 272
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-007 -avg 1e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 68 -shape 679 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 68 -freewire 0 -freeedge 0 -sharededge 272 -max_solid 0 -max_shell 0 -max_face 68 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1e-007 -avg 1e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename robinet_microsurface.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 2 ( 29 ) Summary = 2 ( 29 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 32 ( 32 ) Summary = 419 ( 419 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 32 ( 32 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 177 ( 177 )
-TOLERANCE : MaxTol = 0.06404154287 ( 0.06404154205 ) AvgTol = 0.002360273594 ( 0.002360979702 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 29 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 32 -shape 419
+checkstatshape res_1 -solid 0 -shell 0 -face 32 -freewire 0 -freeedge 0 -sharededge 177
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.06404154205 -avg 0.002360979702]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 29 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 32 -shape 419 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 32 -freewire 0 -freeedge 0 -sharededge 177 -max_solid 0 -max_shell 0 -max_face 32 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.06404154287 -avg 0.002360273594 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename scenrio2.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 1 ) Summary = 0 ( 1 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 26 ) Summary = 0 ( 26 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 23 ( 23 ) Summary = 993 ( 993 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 23 ( 23 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 468 ( 468 )
-TOLERANCE : MaxTol = 0.7088972898 ( 0.7088972898 ) AvgTol = 0.007706834255 ( 0.007716106329 )
-LABELS : N0Labels = 23 ( 23 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 23 ( 23 ) NameLabels = 23 ( 23 ) ColorLabels = 23 ( 23 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = GRAY ( GRAY )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 26 -max_faults 0
+checkxstat D_First -n0 23 -n1 0 -n2 0 -total 23 -withname 23 -withcolor 23 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { GRAY } -nbcolors 1 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 23 -shape 993
+checkstatshape res_1 -solid 0 -shell 0 -face 23 -freewire 0 -freeedge 0 -sharededge 468
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.7088972898 -avg 0.007716106329]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 26 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 23 -n1 0 -n2 0 -total 23 -withname 23 -withcolor 23 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 23 -n1 0 -n2 0 -total 23 -withname 23 -withcolor 23 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { GRAY } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 23 -shape 993 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 23 -freewire 0 -freeedge 0 -sharededge 468 -max_solid 0 -max_shell 0 -max_face 23 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.7088972898 -avg 0.007706834255 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename upm_italie.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 34 ( 35 ) Summary = 34 ( 35 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 530 ( 530 ) Summary = 6512 ( 6512 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 530 ( 530 ) FreeWire = 2 ( 2 ) FreeEdge = 146 ( 146 ) SharedEdge = 2648 ( 2648 )
-TOLERANCE : MaxTol = 0.0469660729 ( 0.0469660729 ) AvgTol = 0.000869854804 ( 0.0008698603728 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 35 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 530 -shape 6512
+checkstatshape res_1 -solid 0 -shell 0 -face 530 -freewire 2 -freeedge 146 -sharededge 2648
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.0469660729 -avg 0.0008698603728]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 35 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 34 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 530 -shape 6512 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 530 -freewire 2 -freeedge 146 -sharededge 2648 -max_solid 0 -max_shell 0 -max_face 530 -max_freewire 2 -max_freeedge 146
+checkmaxtol res_2 -tol 0.0469660729 -avg 0.000869854804 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
-
set filename TEC0278.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 5 ( 0 ) Summary = 5 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 0 ( 0 ) Summary = 28 ( 27 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 0 ( 0 ) FreeWire = 2 ( 2 ) FreeEdge = 12 ( 12 ) SharedEdge = 12 ( 12 )
-TOLERANCE : MaxTol = 1.946144384e-005 ( 1.946144167e-005 ) AvgTol = 3.118935701e-006 ( 3.98657152e-006 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 0 -shape 27
+checkstatshape res_1 -solid 0 -shell 0 -face 0 -freewire 2 -freeedge 12 -sharededge 12
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.946144167e-005 -avg 3.98657152e-006]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 5 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 0 -shape 28 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 0 -freewire 2 -freeedge 12 -sharededge 12 -max_solid 0 -max_shell 0 -max_face 0 -max_freewire 2 -max_freeedge 12
+checkmaxtol res_2 -tol 1.946144384e-005 -avg 3.118935701e-006 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename UK1.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 1 ) Summary = 0 ( 1 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 1 ( 87 ) Summary = 1 ( 87 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 65 ( 65 ) Summary = 981 ( 974 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 65 ( 65 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 425 ( 419 )
-TOLERANCE : MaxTol = 1e-005 ( 1e-005 ) AvgTol = 5.069367256e-007 ( 5.437344663e-007 )
-LABELS : N0Labels = 65 ( 65 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 65 ( 65 ) NameLabels = 65 ( 65 ) ColorLabels = 0 ( 0 ) LayerLabels = 65 ( 65 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 1 ( 1 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 87 -max_faults 0
+checkxstat D_First -n0 65 -n1 0 -n2 0 -total 65 -withname 65 -withcolor 0 -withlayer 65 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { 1 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 65 -shape 974
+checkstatshape res_1 -solid 0 -shell 0 -face 65 -freewire 0 -freeedge 0 -sharededge 419
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-005 -avg 5.437344663e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 87 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 65 -n1 0 -n2 0 -total 65 -withname 65 -withcolor 0 -withlayer 65 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 65 -n1 0 -n2 0 -total 65 -withname 65 -withcolor 0 -withlayer 65 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { 1 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 65 -shape 981 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 65 -freewire 0 -freeedge 0 -sharededge 425 -max_solid 0 -max_shell 0 -max_face 65 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1e-005 -avg 5.069367256e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename UK2.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 1 ) Summary = 0 ( 1 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 26 ( 96 ) Summary = 26 ( 96 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 71 ( 71 ) Summary = 1714 ( 1714 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 71 ( 71 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 780 ( 780 )
-TOLERANCE : MaxTol = 0.6714388732 ( 0.6714388722 ) AvgTol = 0.03709378851 ( 0.0370998158 )
-LABELS : N0Labels = 71 ( 71 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 71 ( 71 ) NameLabels = 71 ( 71 ) ColorLabels = 0 ( 0 ) LayerLabels = 71 ( 71 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 1 ( 1 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 96 -max_faults 0
+checkxstat D_First -n0 71 -n1 0 -n2 0 -total 71 -withname 71 -withcolor 0 -withlayer 71 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { 1 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 71 -shape 1714
+checkstatshape res_1 -solid 0 -shell 0 -face 71 -freewire 0 -freeedge 0 -sharededge 780
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.6714388722 -avg 0.0370998158]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 96 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 26 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 71 -n1 0 -n2 0 -total 71 -withname 71 -withcolor 0 -withlayer 71 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 71 -n1 0 -n2 0 -total 71 -withname 71 -withcolor 0 -withlayer 71 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { 1 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 71 -shape 1714 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 71 -freewire 0 -freeedge 0 -sharededge 780 -max_solid 0 -max_shell 0 -max_face 71 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.6714388732 -avg 0.03709378851 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
set filename UKI60095.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 13 ( 12 ) Summary = 13 ( 12 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 622 ( 622 ) Summary = 7855 ( 7855 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 622 ( 622 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 3285 ( 3285 )
-TOLERANCE : MaxTol = 0.9474413117 ( 0.9474413171 ) AvgTol = 0.0445709877 ( 0.04457492124 )
-LABELS : N0Labels = 622 ( 622 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 622 ( 622 ) NameLabels = 622 ( 622 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 10 -max_faults 0
+checkxstat D_First -n0 622 -n1 0 -n2 0 -total 622 -withname 622 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 622 -shape 7855
+checkstatshape res_1 -solid 0 -shell 0 -face 622 -freewire 0 -freeedge 0 -sharededge 3285
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.9474413171 -avg 0.04457492124]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 10 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 7 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 622 -n1 0 -n2 0 -total 622 -withname 622 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 622 -n1 0 -n2 0 -total 622 -withname 622 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 622 -shape 7855 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 622 -freewire 0 -freeedge 0 -sharededge 3285 -max_solid 0 -max_shell 0 -max_face 622 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.9474413117 -avg 0.0445709877 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename UKI60155.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 2 ( 2 ) Summary = 2 ( 2 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 228 ( 228 ) Summary = 3031 ( 3031 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 228 ( 228 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 1288 ( 1288 )
-TOLERANCE : MaxTol = 0.9908409583 ( 0.9908409583 ) AvgTol = 0.05061446111 ( 0.05061549122 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 228 -shape 3031
+checkstatshape res_1 -solid 0 -shell 0 -face 228 -freewire 0 -freeedge 0 -sharededge 1288
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.9908409583 -avg 0.05061549122]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 228 -shape 3031 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 228 -freewire 0 -freeedge 0 -sharededge 1288 -max_solid 0 -max_shell 0 -max_face 228 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.9908409583 -avg 0.05061446111 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename USA60337.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 7 ( 157 ) Summary = 7 ( 157 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 52 ( 52 ) Summary = 851 ( 851 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 52 ( 52 ) FreeWire = 0 ( 0 ) FreeEdge = 3 ( 3 ) SharedEdge = 372 ( 372 )
-TOLERANCE : MaxTol = 0.2057401816 ( 0.205740183 ) AvgTol = 0.001181147318 ( 0.001181149489 )
-LABELS : N0Labels = 55 ( 55 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 55 ( 55 ) NameLabels = 55 ( 55 ) ColorLabels = 53 ( 53 ) LayerLabels = 55 ( 55 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = CYAN1 MAGENTA1 ( CYAN1 MAGENTA1 )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 6 ( 6 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 157 -max_faults 0
+checkxstat D_First -n0 55 -n1 0 -n2 0 -total 55 -withname 55 -withcolor 53 -withlayer 55 -centroid 0 -volume 0 -area 0 -colors { CYAN1 MAGENTA1 } -nbcolors 2 -layers { 6 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 52 -shape 851
+checkstatshape res_1 -solid 0 -shell 0 -face 52 -freewire 0 -freeedge 3 -sharededge 372
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.205740183 -avg 0.001181149489]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 157 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 7 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 55 -n1 0 -n2 0 -total 55 -withname 55 -withcolor 53 -withlayer 55 -centroid 0 -volume 0 -area 0 -nbcolors 2 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 55 -n1 0 -n2 0 -total 55 -withname 55 -withcolor 53 -withlayer 55 -centroid 0 -volume 0 -area 0 -colors { CYAN1 MAGENTA1 } -nbcolors 2 -layers { 6 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 52 -shape 851 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 52 -freewire 0 -freeedge 3 -sharededge 372 -max_solid 0 -max_shell 0 -max_face 52 -max_freewire 0 -max_freeedge 3
+checkmaxtol res_2 -tol 0.2057401816 -avg 0.001181147318 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename annie_surf.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 4 ) Summary = 0 ( 4 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 74 ( 74 ) Summary = 957 ( 957 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 74 ( 74 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 402 ( 402 )
-TOLERANCE : MaxTol = 0.4002596462 ( 0.4002596419 ) AvgTol = 0.07066549153 ( 0.07066573636 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 74 -shape 957
+checkstatshape res_1 -solid 0 -shell 0 -face 74 -freewire 0 -freeedge 0 -sharededge 402
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.4002596419 -avg 0.07066573636]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 74 -shape 957 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 74 -freewire 0 -freeedge 0 -sharededge 402 -max_solid 0 -max_shell 0 -max_face 74 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.4002596462 -avg 0.07066549153 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR25923 ALL: TPSTAT : Faulty"
set filename clapet.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 427 ( 427 ) Summary = 6071 ( 6071 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 427 ( 427 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 2607 ( 2607 )
-TOLERANCE : MaxTol = 0.9913863463 ( 0.9913863463 ) AvgTol = 0.05768021989 ( 0.05768022342 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 427 -shape 6071
+checkstatshape res_1 -solid 0 -shell 0 -face 427 -freewire 0 -freeedge 0 -sharededge 2607
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.9913863463 -avg 0.05768022342]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 427 -shape 6071 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 427 -freewire 0 -freeedge 0 -sharededge 2607 -max_solid 0 -max_shell 0 -max_face 427 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.9913863463 -avg 0.05768021989 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename coq-inf-support.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 1 ) Summary = 0 ( 1 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 1 ( 3 ) Summary = 1 ( 3 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 380 ( 380 ) Summary = 4599 ( 4599 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 380 ( 380 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 1904 ( 1904 )
-TOLERANCE : MaxTol = 0.7395230815 ( 0.7395230851 ) AvgTol = 0.02340356526 ( 0.02340359477 )
-LABELS : N0Labels = 380 ( 380 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 380 ( 380 ) NameLabels = 380 ( 380 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 6 -max_faults 0
+checkxstat D_First -n0 380 -n1 0 -n2 0 -total 380 -withname 380 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 380 -shape 4599
+checkstatshape res_1 -solid 0 -shell 0 -face 380 -freewire 0 -freeedge 0 -sharededge 1904
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.7395230851 -avg 0.02340359477]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 6 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 6 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 380 -n1 0 -n2 0 -total 380 -withname 380 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 380 -n1 0 -n2 0 -total 380 -withname 380 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 380 -shape 4599 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 380 -freewire 0 -freeedge 0 -sharededge 1904 -max_solid 0 -max_shell 0 -max_face 380 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.7395230815 -avg 0.02340356526 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename coq-sup-support.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 1 ) Summary = 0 ( 1 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 2 ) Summary = 0 ( 2 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 1 ( 1 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 409 ( 409 ) Summary = 5244 ( 5244 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 409 ( 409 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 2207 ( 2207 )
-TOLERANCE : MaxTol = 0.9579389807 ( 0.9579389801 ) AvgTol = 0.05177332439 ( 0.05180172526 )
-LABELS : N0Labels = 409 ( 409 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 409 ( 409 ) NameLabels = 409 ( 409 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 3 -max_faults 0
+checkxstat D_First -n0 409 -n1 0 -n2 0 -total 409 -withname 409 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 1 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 409 -shape 5244
+checkstatshape res_1 -solid 0 -shell 0 -face 409 -freewire 0 -freeedge 0 -sharededge 2207
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.9579389801 -avg 0.05180172526]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 3 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 409 -n1 0 -n2 0 -total 409 -withname 409 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 409 -n1 0 -n2 0 -total 409 -withname 409 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 1 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 1 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 409 -shape 5244 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 409 -freewire 0 -freeedge 0 -sharededge 2207 -max_solid 0 -max_shell 0 -max_face 409 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.9579389807 -avg 0.05177332439 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename frame.igs
-set ref_data {
-DATA : Faulties = 0 ( 5005 ) Warnings = 0 ( 1 ) Summary = 0 ( 5006 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 6 ( 0 ) Summary = 6 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 410 ( 410 ) Summary = 11585 ( 11585 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 410 ( 410 ) FreeWire = 410 ( 410 ) FreeEdge = 2910 ( 2910 ) SharedEdge = 4569 ( 4569 )
-TOLERANCE : MaxTol = 0.6309534605 ( 0.6309534603 ) AvgTol = 0.01007170672 ( 0.0100718085 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 1651 ( 2052 ) N2Labels = 0 ( 0 ) TotalLabels = 1652 ( 2053 ) NameLabels = 1652 ( 2053 ) ColorLabels = 1651 ( 2052 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = WHITE ( WHITE )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 1 -max_faults 5005
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 2052 -n2 0 -total 2053 -withname 2053 -withcolor 2052 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 410 -shape 11585
+checkstatshape res_1 -solid 0 -shell 0 -face 410 -freewire 410 -freeedge 2910 -sharededge 4569
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.6309534603 -avg 0.0100718085]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 1 -max_faults 5005
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 6 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 2052 -n2 0 -total 2053 -withname 2053 -withcolor 2052 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 1651 -n2 0 -total 1652 -withname 1652 -withcolor 1651 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 410 -shape 11585 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 410 -freewire 410 -freeedge 2910 -sharededge 4569 -max_solid 0 -max_shell 0 -max_face 410 -max_freewire 410 -max_freeedge 2910
+checkmaxtol res_2 -tol 0.6309534605 -avg 0.01007170672 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename ims012.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 1 ) Summary = 0 ( 1 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 76 ) Summary = 0 ( 76 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 79 ( 79 ) Summary = 2314 ( 2314 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 79 ( 79 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 1068 ( 1068 )
-TOLERANCE : MaxTol = 6.019859301e-006 ( 1e-005 ) AvgTol = 2.732868072e-007 ( 7.554593962e-006 )
-LABELS : N0Labels = 79 ( 79 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 79 ( 79 ) NameLabels = 79 ( 79 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 76 -max_faults 0
+checkxstat D_First -n0 79 -n1 0 -n2 0 -total 79 -withname 79 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 79 -shape 2314
+checkstatshape res_1 -solid 0 -shell 0 -face 79 -freewire 0 -freeedge 0 -sharededge 1068
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-005 -avg 7.554593962e-006]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 76 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 79 -n1 0 -n2 0 -total 79 -withname 79 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 79 -n1 0 -n2 0 -total 79 -withname 79 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 79 -shape 2314 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 79 -freewire 0 -freeedge 0 -sharededge 1068 -max_solid 0 -max_shell 0 -max_face 79 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 6.019859301e-006 -avg 2.732868072e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TOLERANCE : Faulty"
-
set filename lh93wsddr3370z4.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 164 ( 4127 ) Summary = 164 ( 4127 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 448 ( 448 ) Summary = 7237 ( 7237 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 448 ( 448 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 3192 ( 3192 )
-TOLERANCE : MaxTol = 0.08683083502 ( 0.04341528762 ) AvgTol = 0.0008700419523 ( 0.0007558849075 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4158 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 448 -shape 7237
+checkstatshape res_1 -solid 0 -shell 0 -face 448 -freewire 0 -freeedge 0 -sharededge 3192
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.04341528762 -avg 0.0007558849075]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4158 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 165 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 448 -shape 7237 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 448 -freewire 0 -freeedge 0 -sharededge 3192 -max_solid 0 -max_shell 0 -max_face 448 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.08683083502 -avg 0.0008700419523 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename BUC40182.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 2 ( 119 ) Summary = 2 ( 119 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 48 ( 48 ) Summary = 876 ( 876 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 48 ( 48 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 383 ( 383 )
-TOLERANCE : MaxTol = 0.4654616407 ( 0.4654616407 ) AvgTol = 0.01534289133 ( 0.01534994109 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 48 ( 304 ) N2Labels = 0 ( 0 ) TotalLabels = 49 ( 305 ) NameLabels = 49 ( 72 ) ColorLabels = 48 ( 304 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 4 ( 4 )
-COLORS : Colors = BLUE1 DARKGREEN WHITE YELLOW ( BLUE1 DARKGREEN WHITE YELLOW )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 119 -max_faults 0
+checkxstat D_First -n0 1 -n1 304 -n2 0 -total 305 -withname 72 -withcolor 304 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 DARKGREEN WHITE YELLOW } -nbcolors 4 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 48 -shape 876
+checkstatshape res_1 -solid 0 -shell 0 -face 48 -freewire 0 -freeedge 0 -sharededge 383
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.4654616407 -avg 0.01534994109]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 119 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 304 -n2 0 -total 305 -withname 72 -withcolor 304 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 4 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 48 -n2 0 -total 49 -withname 49 -withcolor 48 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 DARKGREEN WHITE YELLOW } -nbcolors 4 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 48 -shape 876 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 48 -freewire 0 -freeedge 0 -sharededge 383 -max_solid 0 -max_shell 0 -max_face 48 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.4654616407 -avg 0.01534289133 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename BUC50002.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 1 ( 24 ) Summary = 1 ( 24 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 98 ( 98 ) Summary = 1489 ( 1489 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 98 ( 98 ) FreeWire = 0 ( 0 ) FreeEdge = 26 ( 26 ) SharedEdge = 633 ( 633 )
-TOLERANCE : MaxTol = 0.03645053132 ( 0.03645054227 ) AvgTol = 0.0005450433705 ( 0.0005479624657 )
-LABELS : N0Labels = 124 ( 124 ) N1Labels = 0 ( 87 ) N2Labels = 0 ( 0 ) TotalLabels = 124 ( 211 ) NameLabels = 124 ( 124 ) ColorLabels = 124 ( 211 ) LayerLabels = 124 ( 211 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = GREEN ( GREEN )
-NLAYERS : NLayers = 2 ( 2 )
-LAYERS : Layers = 101 141 ( 101 141 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 24 -max_faults 0
+checkxstat D_First -n0 124 -n1 87 -n2 0 -total 211 -withname 124 -withcolor 211 -withlayer 211 -centroid 0 -volume 0 -area 0 -colors { GREEN } -nbcolors 1 -layers { 101 141 } -nblayers 2
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 98 -shape 1489
+checkstatshape res_1 -solid 0 -shell 0 -face 98 -freewire 0 -freeedge 26 -sharededge 633
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.03645054227 -avg 0.0005479624657]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 24 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 124 -n1 87 -n2 0 -total 211 -withname 124 -withcolor 211 -withlayer 211 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 2
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 124 -n1 0 -n2 0 -total 124 -withname 124 -withcolor 124 -withlayer 124 -centroid 0 -volume 0 -area 0 -colors { GREEN } -nbcolors 1 -layers { 101 141 } -nblayers 2
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 98 -shape 1489 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 98 -freewire 0 -freeedge 26 -sharededge 633 -max_solid 0 -max_shell 0 -max_face 98 -max_freewire 0 -max_freeedge 26
+checkmaxtol res_2 -tol 0.03645053132 -avg 0.0005450433705 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TOLERANCE : Faulty"
-
set filename BUC50024.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 14 ) Summary = 0 ( 14 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 11 ( 11 ) Summary = 605 ( 605 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 11 ( 11 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 291 ( 291 )
-TOLERANCE : MaxTol = 0.03107706969 ( 0.01553878539 ) AvgTol = 0.0002156995011 ( 0.000180475073 )
-LABELS : N0Labels = 11 ( 11 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 11 ( 11 ) NameLabels = 11 ( 11 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 14 -max_faults 0
+checkxstat D_First -n0 11 -n1 0 -n2 0 -total 11 -withname 11 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 11 -shape 605
+checkstatshape res_1 -solid 0 -shell 0 -face 11 -freewire 0 -freeedge 0 -sharededge 291
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.01553878539 -avg 0.000180475073]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 14 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 11 -n1 0 -n2 0 -total 11 -withname 11 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 11 -n1 0 -n2 0 -total 11 -withname 11 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 11 -shape 605 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 11 -freewire 0 -freeedge 0 -sharededge 291 -max_solid 0 -max_shell 0 -max_face 11 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.03107706969 -avg 0.0002156995011 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: CHECKSHAPE : Faulty"
-
set filename modelsup.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 1 ( 7 ) Summary = 1 ( 7 )
-CHECKSHAPE : Wires = 2 ( 1 ) Faces = 2 ( 1 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 1477 ( 1477 ) Summary = 18136 ( 18135 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 1477 ( 1477 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 7639 ( 7639 )
-TOLERANCE : MaxTol = 0.9794963919 ( 0.9794963919 ) AvgTol = 0.03860117108 ( 0.03861764608 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 13 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 1 -max_faces 1 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 1477 -shape 18135
+checkstatshape res_1 -solid 0 -shell 0 -face 1477 -freewire 0 -freeedge 0 -sharededge 7639
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.9794963919 -avg 0.03861764608]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 13 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 1 -max_faces 1 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 2 -max_faces 2 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 1477 -shape 18136 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 1477 -freewire 0 -freeedge 0 -sharededge 7639 -max_solid 0 -max_shell 0 -max_face 1477 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.9794963919 -avg 0.03860117108 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: NBSHAPES : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename BUC60032.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 53 ) Warnings = 72 ( 167 ) Summary = 72 ( 220 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 42 ( 42 ) Summary = 1082 ( 1135 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 42 ( 42 ) FreeWire = 8 ( 58 ) FreeEdge = 217 ( 217 ) SharedEdge = 395 ( 395 )
-TOLERANCE : MaxTol = 0.01444583491 ( 0.01444583491 ) AvgTol = 0.0002992099521 ( 0.0003004299328 )
-LABELS : N0Labels = 3 ( 6 ) N1Labels = 193 ( 264 ) N2Labels = 0 ( 0 ) TotalLabels = 196 ( 270 ) NameLabels = 144 ( 230 ) ColorLabels = 193 ( 261 ) LayerLabels = 192 ( 209 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 6 ( 6 )
-COLORS : Colors = BLUE1 CYAN1 MAGENTA2 RED TURQUOISE3 WHITE ( BLUE1 CYAN1 MAGENTA2 RED TURQUOISE3 WHITE )
-NLAYERS : NLayers = 2 ( 2 )
-LAYERS : Layers = 1 252 ( 1 252 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 167 -max_faults 53
+checkxstat D_First -n0 6 -n1 264 -n2 0 -total 270 -withname 230 -withcolor 261 -withlayer 209 -centroid 0 -volume 0 -area 0 -colors { BLUE1 CYAN1 MAGENTA2 RED TURQUOISE3 WHITE } -nbcolors 6 -layers { 1 252 } -nblayers 2
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 42 -shape 1135
+checkstatshape res_1 -solid 0 -shell 0 -face 42 -freewire 58 -freeedge 217 -sharededge 395
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.01444583491 -avg 0.0003004299328]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 167 -max_faults 53
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 72 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 6 -n1 264 -n2 0 -total 270 -withname 230 -withcolor 261 -withlayer 209 -centroid 0 -volume 0 -area 0 -nbcolors 6 -nblayers 2
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 193 -n2 0 -total 196 -withname 144 -withcolor 193 -withlayer 192 -centroid 0 -volume 0 -area 0 -colors { BLUE1 CYAN1 MAGENTA2 RED TURQUOISE3 WHITE } -nbcolors 6 -layers { 1 252 } -nblayers 2
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 42 -shape 1082 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 42 -freewire 8 -freeedge 217 -sharededge 395 -max_solid 0 -max_shell 0 -max_face 42 -max_freewire 58 -max_freeedge 217
+checkmaxtol res_2 -tol 0.01444583491 -avg 0.0002992099521 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: NBSHAPES : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename BUC60033.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 5 ) Warnings = 106 ( 832 ) Summary = 106 ( 837 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 208 ( 208 ) Summary = 7973 ( 8005 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 208 ( 208 ) FreeWire = 0 ( 32 ) FreeEdge = 70 ( 70 ) SharedEdge = 3748 ( 3748 )
-TOLERANCE : MaxTol = 0.9049033554 ( 0.9049033554 ) AvgTol = 0.01221723065 ( 0.01221855991 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 246 ( 2183 ) N2Labels = 0 ( 0 ) TotalLabels = 247 ( 2184 ) NameLabels = 247 ( 374 ) ColorLabels = 246 ( 2183 ) LayerLabels = 241 ( 2178 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 5 ( 5 )
-COLORS : Colors = CYAN1 GREEN RED WHITE YELLOW ( CYAN1 GREEN RED WHITE YELLOW )
-NLAYERS : NLayers = 2 ( 2 )
-LAYERS : Layers = 100 101 ( 100 101 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 832 -max_faults 5
+checkxstat D_First -n0 1 -n1 2183 -n2 0 -total 2184 -withname 374 -withcolor 2183 -withlayer 2178 -centroid 0 -volume 0 -area 0 -colors { CYAN1 GREEN RED WHITE YELLOW } -nbcolors 5 -layers { 100 101 } -nblayers 2
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 208 -shape 8005
+checkstatshape res_1 -solid 0 -shell 0 -face 208 -freewire 32 -freeedge 70 -sharededge 3748
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.9049033554 -avg 0.01221855991]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 832 -max_faults 5
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 106 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 2183 -n2 0 -total 2184 -withname 374 -withcolor 2183 -withlayer 2178 -centroid 0 -volume 0 -area 0 -nbcolors 5 -nblayers 2
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 246 -n2 0 -total 247 -withname 247 -withcolor 246 -withlayer 241 -centroid 0 -volume 0 -area 0 -colors { CYAN1 GREEN RED WHITE YELLOW } -nbcolors 5 -layers { 100 101 } -nblayers 2
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 208 -shape 7973 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 208 -freewire 0 -freeedge 70 -sharededge 3748 -max_solid 0 -max_shell 0 -max_face 208 -max_freewire 32 -max_freeedge 70
+checkmaxtol res_2 -tol 0.9049033554 -avg 0.01221723065 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: NBSHAPES : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename BUC60034.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 53 ) Warnings = 3 ( 637 ) Summary = 3 ( 690 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 1766 ( 1766 ) Summary = 18582 ( 18587 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 1766 ( 1766 ) FreeWire = 0 ( 2 ) FreeEdge = 104 ( 104 ) SharedEdge = 7469 ( 7469 )
-TOLERANCE : MaxTol = 0.1881003203 ( 0.1881003203 ) AvgTol = 0.0004558439058 ( 0.0004561112628 )
-LABELS : N0Labels = 3 ( 6 ) N1Labels = 1868 ( 3154 ) N2Labels = 0 ( 0 ) TotalLabels = 1871 ( 3160 ) NameLabels = 1819 ( 2019 ) ColorLabels = 1868 ( 3151 ) LayerLabels = 1868 ( 3100 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 5 ( 5 )
-COLORS : Colors = BLUE1 MAGENTA2 ORANGE RED WHITE ( BLUE1 MAGENTA2 ORANGE RED WHITE )
-NLAYERS : NLayers = 4 ( 4 )
-LAYERS : Layers = 2 252 3 4 ( 2 252 3 4 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 637 -max_faults 53
+checkxstat D_First -n0 6 -n1 3154 -n2 0 -total 3160 -withname 2019 -withcolor 3151 -withlayer 3100 -centroid 0 -volume 0 -area 0 -colors { BLUE1 MAGENTA2 ORANGE RED WHITE } -nbcolors 5 -layers { 2 252 3 4 } -nblayers 4
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 1766 -shape 18587
+checkstatshape res_1 -solid 0 -shell 0 -face 1766 -freewire 2 -freeedge 104 -sharededge 7469
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.1881003203 -avg 0.0004561112628]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 637 -max_faults 53
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 3 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 6 -n1 3154 -n2 0 -total 3160 -withname 2019 -withcolor 3151 -withlayer 3100 -centroid 0 -volume 0 -area 0 -nbcolors 5 -nblayers 4
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 1868 -n2 0 -total 1871 -withname 1819 -withcolor 1868 -withlayer 1868 -centroid 0 -volume 0 -area 0 -colors { BLUE1 MAGENTA2 ORANGE RED WHITE } -nbcolors 5 -layers { 2 252 3 4 } -nblayers 4
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 1766 -shape 18582 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 1766 -freewire 0 -freeedge 104 -sharededge 7469 -max_solid 0 -max_shell 0 -max_face 1766 -max_freewire 2 -max_freeedge 104
+checkmaxtol res_2 -tol 0.1881003203 -avg 0.0004558439058 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename BUC60035.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 5 ) Warnings = 82 ( 767 ) Summary = 82 ( 772 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 208 ( 208 ) Summary = 7763 ( 7763 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 208 ( 208 ) FreeWire = 0 ( 0 ) FreeEdge = 6 ( 6 ) SharedEdge = 3665 ( 3665 )
-TOLERANCE : MaxTol = 0.1393674657 ( 0.1393674657 ) AvgTol = 0.003094049943 ( 0.003079317701 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 214 ( 2533 ) N2Labels = 0 ( 0 ) TotalLabels = 215 ( 2534 ) NameLabels = 215 ( 330 ) ColorLabels = 214 ( 2533 ) LayerLabels = 209 ( 2528 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 5 ( 5 )
-COLORS : Colors = CYAN1 GREEN RED WHITE YELLOW ( CYAN1 GREEN RED WHITE YELLOW )
-NLAYERS : NLayers = 2 ( 2 )
-LAYERS : Layers = 100 101 ( 100 101 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 798 -max_faults 5
+checkxstat D_First -n0 1 -n1 2533 -n2 0 -total 2534 -withname 330 -withcolor 2533 -withlayer 2528 -centroid 0 -volume 0 -area 0 -colors { CYAN1 GREEN RED WHITE YELLOW } -nbcolors 5 -layers { 100 101 } -nblayers 2
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 208 -shape 7763
+checkstatshape res_1 -solid 0 -shell 0 -face 208 -freewire 0 -freeedge 6 -sharededge 3665
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.1393674657 -avg 0.003079317701]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 798 -max_faults 5
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 86 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 2533 -n2 0 -total 2534 -withname 330 -withcolor 2533 -withlayer 2528 -centroid 0 -volume 0 -area 0 -nbcolors 5 -nblayers 2
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 214 -n2 0 -total 215 -withname 215 -withcolor 214 -withlayer 209 -centroid 0 -volume 0 -area 0 -colors { CYAN1 GREEN RED WHITE YELLOW } -nbcolors 5 -layers { 100 101 } -nblayers 2
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 208 -shape 7763 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 208 -freewire 0 -freeedge 6 -sharededge 3665 -max_solid 0 -max_shell 0 -max_face 208 -max_freewire 0 -max_freeedge 6
+checkmaxtol res_2 -tol 0.1393674657 -avg 0.003094049943 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename BUC60207.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 1 ( 40 ) Summary = 1 ( 40 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 22 ( 22 ) Summary = 770 ( 770 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 22 ( 22 ) FreeWire = 6 ( 6 ) FreeEdge = 123 ( 123 ) SharedEdge = 302 ( 302 )
-TOLERANCE : MaxTol = 0.9257818164 ( 0.9257819919 ) AvgTol = 0.02303074349 ( 0.0230306875 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 131 ( 244 ) N2Labels = 0 ( 0 ) TotalLabels = 132 ( 245 ) NameLabels = 132 ( 149 ) ColorLabels = 131 ( 244 ) LayerLabels = 131 ( 244 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 4 ( 4 )
-COLORS : Colors = BLUE1 GREEN STEELBLUE2 VIOLETRED2 ( BLUE1 GREEN STEELBLUE2 VIOLETRED2 )
-NLAYERS : NLayers = 4 ( 4 )
-LAYERS : Layers = 2 3 51 9 ( 2 3 51 9 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 41 -max_faults 0
+checkxstat D_First -n0 1 -n1 244 -n2 0 -total 245 -withname 149 -withcolor 244 -withlayer 244 -centroid 0 -volume 0 -area 0 -colors { BLUE1 GREEN STEELBLUE2 VIOLETRED2 } -nbcolors 4 -layers { 2 3 51 9 } -nblayers 4
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 22 -shape 770
+checkstatshape res_1 -solid 0 -shell 0 -face 22 -freewire 6 -freeedge 123 -sharededge 302
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.9257819919 -avg 0.0230306875]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 41 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 244 -n2 0 -total 245 -withname 149 -withcolor 244 -withlayer 244 -centroid 0 -volume 0 -area 0 -nbcolors 4 -nblayers 4
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 131 -n2 0 -total 132 -withname 132 -withcolor 131 -withlayer 131 -centroid 0 -volume 0 -area 0 -colors { BLUE1 GREEN STEELBLUE2 VIOLETRED2 } -nbcolors 4 -layers { 2 3 51 9 } -nblayers 4
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 22 -shape 770 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 22 -freewire 6 -freeedge 123 -sharededge 302 -max_solid 0 -max_shell 0 -max_face 22 -max_freewire 6 -max_freeedge 123
+checkmaxtol res_2 -tol 0.9257818164 -avg 0.02303074349 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: NBSHAPES : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename BUC60216.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 57 ( 653 ) Summary = 57 ( 653 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 218 ( 218 ) Summary = 33194 ( 33225 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 218 ( 218 ) FreeWire = 77 ( 108 ) FreeEdge = 2656 ( 2656 ) SharedEdge = 15767 ( 15767 )
-TOLERANCE : MaxTol = 0.1504135906 ( 0.1504135906 ) AvgTol = 0.0004235230987 ( 0.0004477161756 )
-LABELS : N0Labels = 2 ( 2 ) N1Labels = 1279 ( 2954 ) N2Labels = 0 ( 0 ) TotalLabels = 1281 ( 2956 ) NameLabels = 1281 ( 1491 ) ColorLabels = 1280 ( 2955 ) LayerLabels = 284 ( 1902 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 4 ( 4 )
-COLORS : Colors = GREEN MAGENTA1 WHITE YELLOW ( GREEN MAGENTA1 WHITE YELLOW )
-NLAYERS : NLayers = 3 ( 3 )
-LAYERS : Layers = 1 2 3 ( 1 2 3 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 658 -max_faults 0
+checkxstat D_First -n0 2 -n1 2954 -n2 0 -total 2956 -withname 1491 -withcolor 2955 -withlayer 1902 -centroid 0 -volume 0 -area 0 -colors { GREEN MAGENTA1 WHITE YELLOW } -nbcolors 4 -layers { 1 2 3 } -nblayers 3
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 218 -shape 33225
+checkstatshape res_1 -solid 0 -shell 0 -face 218 -freewire 108 -freeedge 2656 -sharededge 15767
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.1504135906 -avg 0.0004477161756]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 658 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 57 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 2 -n1 2954 -n2 0 -total 2956 -withname 1491 -withcolor 2955 -withlayer 1902 -centroid 0 -volume 0 -area 0 -nbcolors 4 -nblayers 3
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 2 -n1 1279 -n2 0 -total 1281 -withname 1281 -withcolor 1280 -withlayer 284 -centroid 0 -volume 0 -area 0 -colors { GREEN MAGENTA1 WHITE YELLOW } -nbcolors 4 -layers { 1 2 3 } -nblayers 3
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 218 -shape 33194 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 218 -freewire 77 -freeedge 2656 -sharededge 15767 -max_solid 0 -max_shell 0 -max_face 218 -max_freewire 108 -max_freeedge 2656
+checkmaxtol res_2 -tol 0.1504135906 -avg 0.0004235230987 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: NBSHAPES : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename BUC60625-2.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 11 ( 61 ) Summary = 11 ( 61 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 120 ( 120 ) Summary = 5254 ( 5260 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 120 ( 120 ) FreeWire = 31 ( 31 ) FreeEdge = 1039 ( 1039 ) SharedEdge = 2048 ( 2048 )
-TOLERANCE : MaxTol = 0.763617442 ( 0.7636174422 ) AvgTol = 0.001290743922 ( 0.001290622462 )
-LABELS : N0Labels = 1051 ( 1051 ) N1Labels = 0 ( 13 ) N2Labels = 0 ( 0 ) TotalLabels = 1051 ( 1064 ) NameLabels = 1051 ( 1051 ) ColorLabels = 971 ( 1064 ) LayerLabels = 971 ( 1051 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 8 ( 8 )
-COLORS : Colors = BLACK BLUE1 CYAN1 GREEN MAGENTA1 RED WHITE YELLOW ( BLACK BLUE1 CYAN1 GREEN MAGENTA1 RED WHITE YELLOW )
-NLAYERS : NLayers = 7 ( 7 )
-LAYERS : Layers = 1 100 63 70 97 98 99 ( 1 100 63 70 97 98 99 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 61 -max_faults 0
+checkxstat D_First -n0 1051 -n1 13 -n2 0 -total 1064 -withname 1051 -withcolor 1064 -withlayer 1051 -centroid 0 -volume 0 -area 0 -colors { BLACK BLUE1 CYAN1 GREEN MAGENTA1 RED WHITE YELLOW } -nbcolors 8 -layers { 1 100 63 70 97 98 99 } -nblayers 7
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 120 -shape 5260
+checkstatshape res_1 -solid 0 -shell 0 -face 120 -freewire 31 -freeedge 1039 -sharededge 2048
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.7636174422 -avg 0.001290622462]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 61 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 11 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1051 -n1 13 -n2 0 -total 1064 -withname 1051 -withcolor 1064 -withlayer 1051 -centroid 0 -volume 0 -area 0 -nbcolors 8 -nblayers 7
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1051 -n1 0 -n2 0 -total 1051 -withname 1051 -withcolor 971 -withlayer 971 -centroid 0 -volume 0 -area 0 -colors { BLACK BLUE1 CYAN1 GREEN MAGENTA1 RED WHITE YELLOW } -nbcolors 8 -layers { 1 100 63 70 97 98 99 } -nblayers 7
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 120 -shape 5254 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 120 -freewire 31 -freeedge 1039 -sharededge 2048 -max_solid 0 -max_shell 0 -max_face 120 -max_freewire 31 -max_freeedge 1039
+checkmaxtol res_2 -tol 0.763617442 -avg 0.001290743922 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename BUC60800.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 1 ) Summary = 0 ( 1 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 8 ) Summary = 0 ( 8 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 1 ( 1 ) Summary = 244 ( 244 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 1 ( 1 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 121 ( 121 )
-TOLERANCE : MaxTol = 1e-07 ( 1.000369935e-07 ) AvgTol = 1e-07 ( 1.000003506e-07 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 121 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 122 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 122 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = WHITE ( WHITE )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 8 -max_faults 0
+checkxstat D_First -n0 1 -n1 121 -n2 0 -total 122 -withname 1 -withcolor 122 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 1 -shape 244
+checkstatshape res_1 -solid 0 -shell 0 -face 1 -freewire 0 -freeedge 0 -sharededge 121
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000369935e-07 -avg 1.000003506e-07]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 8 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 121 -n2 0 -total 122 -withname 1 -withcolor 122 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 1 -shape 244 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 1 -freewire 0 -freeedge 0 -sharededge 121 -max_solid 0 -max_shell 0 -max_face 1 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1e-07 -avg 1e-07 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename BUC60850.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 232 ( 515 ) Summary = 232 ( 515 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 146 ( 146 ) Summary = 2430 ( 2430 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 146 ( 146 ) FreeWire = 5 ( 5 ) FreeEdge = 176 ( 176 ) SharedEdge = 1005 ( 1005 )
-TOLERANCE : MaxTol = 0.02364292093 ( 0.0236405571 ) AvgTol = 9.640026567e-005 ( 9.641748491e-005 )
-LABELS : N0Labels = 285 ( 287 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 285 ( 287 ) NameLabels = 285 ( 287 ) ColorLabels = 279 ( 285 ) LayerLabels = 279 ( 285 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = MAGENTA1 WHITE ( MAGENTA1 WHITE )
-NLAYERS : NLayers = 2 ( 2 )
-LAYERS : Layers = 1 2 ( 1 2 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 515 -max_faults 0
+checkxstat D_First -n0 287 -n1 0 -n2 0 -total 287 -withname 287 -withcolor 285 -withlayer 285 -centroid 0 -volume 0 -area 0 -colors { MAGENTA1 WHITE } -nbcolors 2 -layers { 1 2 } -nblayers 2
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 146 -shape 2430
+checkstatshape res_1 -solid 0 -shell 0 -face 146 -freewire 5 -freeedge 176 -sharededge 1005
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.0236405571 -avg 9.641748491e-005]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 515 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 232 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 287 -n1 0 -n2 0 -total 287 -withname 287 -withcolor 285 -withlayer 285 -centroid 0 -volume 0 -area 0 -nbcolors 2 -nblayers 2
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 285 -n1 0 -n2 0 -total 285 -withname 285 -withcolor 279 -withlayer 279 -centroid 0 -volume 0 -area 0 -colors { MAGENTA1 WHITE } -nbcolors 2 -layers { 1 2 } -nblayers 2
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 146 -shape 2430 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 146 -freewire 5 -freeedge 176 -sharededge 1005 -max_solid 0 -max_shell 0 -max_face 146 -max_freewire 5 -max_freeedge 176
+checkmaxtol res_2 -tol 0.02364292093 -avg 9.640026567e-005 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename BUC61004-1.igs
-set ref_data {
-DATA : Faulties = 0 ( 4 ) Warnings = 0 ( 0 ) Summary = 0 ( 4 )
-TPSTAT : Faulties = 0 ( 4 ) Warnings = 0 ( 312 ) Summary = 0 ( 316 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 241 ( 241 ) Summary = 9983 ( 9983 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 241 ( 241 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 4776 ( 4776 )
-TOLERANCE : MaxTol = 9.452110694e-06 ( 1e-05 ) AvgTol = 1.744349671e-07 ( 8.133454698e-06 )
-LABELS : N0Labels = 241 ( 241 ) N1Labels = 0 ( 83 ) N2Labels = 0 ( 0 ) TotalLabels = 241 ( 324 ) NameLabels = 241 ( 241 ) ColorLabels = 241 ( 324 ) LayerLabels = 241 ( 324 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = WHITE YELLOW ( WHITE YELLOW )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 10 ( 10 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 4
+checkdoc "tpstat c" -max_warns 312 -max_faults 4
+checkxstat D_First -n0 241 -n1 83 -n2 0 -total 324 -withname 241 -withcolor 324 -withlayer 324 -centroid 0 -volume 0 -area 0 -colors { WHITE YELLOW } -nbcolors 2 -layers { 10 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 241 -shape 9983
+checkstatshape res_1 -solid 0 -shell 0 -face 241 -freewire 0 -freeedge 0 -sharededge 4776
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-05 -avg 8.133454698e-06]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 4
+checkdoc "tpstat c" -max_warns 312 -max_faults 4
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 241 -n1 83 -n2 0 -total 324 -withname 241 -withcolor 324 -withlayer 324 -centroid 0 -volume 0 -area 0 -nbcolors 2 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 241 -n1 0 -n2 0 -total 241 -withname 241 -withcolor 241 -withlayer 241 -centroid 0 -volume 0 -area 0 -colors { WHITE YELLOW } -nbcolors 2 -layers { 10 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 241 -shape 9983 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 241 -freewire 0 -freeedge 0 -sharededge 4776 -max_solid 0 -max_shell 0 -max_face 241 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 9.452110694e-06 -avg 1.744349671e-07 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename BUC61004-2.igs
-set ref_data {
-DATA : Faulties = 0 ( 1 ) Warnings = 0 ( 1 ) Summary = 0 ( 2 )
-TPSTAT : Faulties = 0 ( 1 ) Warnings = 8 ( 427 ) Summary = 8 ( 428 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 180 ( 180 ) Summary = 19884 ( 19884 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 180 ( 180 ) FreeWire = 1 ( 1 ) FreeEdge = 139 ( 139 ) SharedEdge = 9699 ( 9699 )
-TOLERANCE : MaxTol = 0.0305692698 ( 0.03056926518 ) AvgTol = 0.00147298413 ( 0.001472983156 )
-LABELS : N0Labels = 296 ( 296 ) N1Labels = 0 ( 1 ) N2Labels = 0 ( 0 ) TotalLabels = 296 ( 297 ) NameLabels = 296 ( 297 ) ColorLabels = 293 ( 294 ) LayerLabels = 31 ( 31 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 4 ( 4 )
-COLORS : Colors = BLUE1 CYAN1 GREEN YELLOW ( BLUE1 CYAN1 GREEN YELLOW )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 1 ( 1 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 1 -max_faults 1
+checkdoc "tpstat c" -max_warns 427 -max_faults 1
+checkxstat D_First -n0 296 -n1 1 -n2 0 -total 297 -withname 297 -withcolor 294 -withlayer 31 -centroid 0 -volume 0 -area 0 -colors { BLUE1 CYAN1 GREEN YELLOW } -nbcolors 4 -layers { 1 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 180 -shape 19884
+checkstatshape res_1 -solid 0 -shell 0 -face 180 -freewire 1 -freeedge 139 -sharededge 9699
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.03056926518 -avg 0.001472983156]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 1 -max_faults 1
+checkdoc "tpstat c" -max_warns 427 -max_faults 1
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 8 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 296 -n1 1 -n2 0 -total 297 -withname 297 -withcolor 294 -withlayer 31 -centroid 0 -volume 0 -area 0 -nbcolors 4 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 296 -n1 0 -n2 0 -total 296 -withname 296 -withcolor 293 -withlayer 31 -centroid 0 -volume 0 -area 0 -colors { BLUE1 CYAN1 GREEN YELLOW } -nbcolors 4 -layers { 1 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 180 -shape 19884 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 180 -freewire 1 -freeedge 139 -sharededge 9699 -max_solid 0 -max_shell 0 -max_face 180 -max_freewire 1 -max_freeedge 139
+checkmaxtol res_2 -tol 0.0305692698 -avg 0.00147298413 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename BUC61004-3.igs
-set ref_data {
-DATA : Faulties = 0 ( 2 ) Warnings = 0 ( 0 ) Summary = 0 ( 2 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 1 ( 21 ) Summary = 1 ( 21 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 1 ( 1 ) Summary = 10 ( 10 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 1 ( 1 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 4 ( 4 )
-TOLERANCE : MaxTol = 1e-007 ( 1e-007 ) AvgTol = 1e-007 ( 1e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = WHITE ( WHITE )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 2
+checkdoc "tpstat c" -max_warns 21 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 1 -shape 10
+checkstatshape res_1 -solid 0 -shell 0 -face 1 -freewire 0 -freeedge 0 -sharededge 4
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-007 -avg 1e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 2
+checkdoc "tpstat c" -max_warns 21 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 1 -shape 10 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 1 -freewire 0 -freeedge 0 -sharededge 4 -max_solid 0 -max_shell 0 -max_face 1 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1e-007 -avg 1e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: NBSHAPES : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename CTS17806.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 478 ( 6259 ) Summary = 478 ( 6259 )
-CHECKSHAPE : Wires = 0 ( 2 ) Faces = 0 ( 3 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 3647 ( 3647 ) Summary = 63291 ( 63420 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 3647 ( 3647 ) FreeWire = 180 ( 289 ) FreeEdge = 1393 ( 1393 ) SharedEdge = 27767 ( 27781 )
-TOLERANCE : MaxTol = 0.9982953477 ( 0.9982953477 ) AvgTol = 0.01534250803 ( 0.01547294777 )
-LABELS : N0Labels = 403 ( 403 ) N1Labels = 3841 ( 15575 ) N2Labels = 0 ( 0 ) TotalLabels = 4244 ( 15978 ) NameLabels = 4242 ( 6516 ) ColorLabels = 4090 ( 15977 ) LayerLabels = 4090 ( 15977 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 5 ( 5 )
-COLORS : Colors = BLUE1 CHARTREUSE CYAN1 DARKKHAKI LIGHTPINK1 ( BLUE1 CHARTREUSE CYAN1 DARKKHAKI LIGHTPINK1 )
-NLAYERS : NLayers = 4 ( 4 )
-LAYERS : Layers = 110 111 116 35 ( 110 111 116 35 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 6295 -max_faults 0
+checkxstat D_First -n0 403 -n1 15575 -n2 0 -total 15978 -withname 6516 -withcolor 15977 -withlayer 15977 -centroid 0 -volume 0 -area 0 -colors { BLUE1 CHARTREUSE CYAN1 DARKKHAKI LIGHTPINK1 } -nbcolors 5 -layers { 110 111 116 35 } -nblayers 4
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 2 -max_faces 3 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 3647 -shape 63420
+checkstatshape res_1 -solid 0 -shell 0 -face 3647 -freewire 289 -freeedge 1393 -sharededge 27781
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.9982953477 -avg 0.01547294777]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 6295 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 481 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 403 -n1 15575 -n2 0 -total 15978 -withname 6516 -withcolor 15977 -withlayer 15977 -centroid 0 -volume 0 -area 0 -nbcolors 5 -nblayers 4
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 403 -n1 3841 -n2 0 -total 4244 -withname 4242 -withcolor 4090 -withlayer 4090 -centroid 0 -volume 0 -area 0 -colors { BLUE1 CHARTREUSE CYAN1 DARKKHAKI LIGHTPINK1 } -nbcolors 5 -layers { 110 111 116 35 } -nblayers 4
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 2 -max_faces 3 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 3647 -shape 63291 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 3647 -freewire 180 -freeedge 1393 -sharededge 27767 -max_solid 0 -max_shell 0 -max_face 3647 -max_freewire 289 -max_freeedge 1393
+checkmaxtol res_2 -tol 0.9982953477 -avg 0.01534250803 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TOLERANCE : Faulty"
-
set filename sample_diff_data_2.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 39 ) Summary = 0 ( 39 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 327 ( 327 ) Summary = 4036 ( 4036 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 327 ( 327 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 1696 ( 1696 )
-TOLERANCE : MaxTol = 0.000190478139 ( 9.082153586e-005 ) AvgTol = 9.791349674e-006 ( 2.775931887e-006 )
-LABELS : N0Labels = 326 ( 326 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 326 ( 326 ) NameLabels = 326 ( 326 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 39 -max_faults 0
+checkxstat D_First -n0 326 -n1 0 -n2 0 -total 326 -withname 326 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 327 -shape 4036
+checkstatshape res_1 -solid 0 -shell 0 -face 327 -freewire 0 -freeedge 0 -sharededge 1696
+set max_tol_res_1 [checkmaxtol res_1 -tol 9.082153586e-005 -avg 2.775931887e-006]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 39 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 326 -n1 0 -n2 0 -total 326 -withname 326 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 326 -n1 0 -n2 0 -total 326 -withname 326 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 327 -shape 4036 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 327 -freewire 0 -freeedge 0 -sharededge 1696 -max_solid 0 -max_shell 0 -max_face 327 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.000190478139 -avg 9.791349674e-006 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename test.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 1 ( 1 ) Summary = 8 ( 8 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 1 ( 1 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 4 ( 4 )
-TOLERANCE : MaxTol = 1.029699839e-007 ( 1e-007 ) AvgTol = 1.011423015e-007 ( 1e-007 )
-LABELS : N0Labels = 1 ( 2 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 2 ) NameLabels = 1 ( 2 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 2 -n1 0 -n2 0 -total 2 -withname 2 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 1 -shape 8
+checkstatshape res_1 -solid 0 -shell 0 -face 1 -freewire 0 -freeedge 0 -sharededge 4
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-007 -avg 1e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 2 -n1 0 -n2 0 -total 2 -withname 2 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 1 -shape 8 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 1 -freewire 0 -freeedge 0 -sharededge 4 -max_solid 0 -max_shell 0 -max_face 1 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.029699839e-007 -avg 1.011423015e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
-set LinuxDiff 1
set filename CTS18546-1.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 169 ( 1113 ) Summary = 169 ( 1113 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 900 ( 900 ) Summary = 18221 ( 18221 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 900 ( 900 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 8213 ( 8213 )
-TOLERANCE : MaxTol = 0.004034169186 ( 0.004034577888 ) AvgTol = 7.709492698e-006 ( 1.210857047e-005 )
-LABELS : N0Labels = 900 ( 900 ) N1Labels = 0 ( 877 ) N2Labels = 0 ( 0 ) TotalLabels = 900 ( 1777 ) NameLabels = 900 ( 900 ) ColorLabels = 900 ( 1777 ) LayerLabels = 900 ( 1777 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = YELLOW ( YELLOW )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 1 ( 1 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1113 -max_faults 0
+checkxstat D_First -n0 900 -n1 877 -n2 0 -total 1777 -withname 900 -withcolor 1777 -withlayer 1777 -centroid 0 -volume 0 -area 0 -colors { YELLOW } -nbcolors 1 -layers { 1 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 900 -shape 18221
+checkstatshape res_1 -solid 0 -shell 0 -face 900 -freewire 0 -freeedge 0 -sharededge 8213
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.004034577888 -avg 1.210857047e-005]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1113 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 169 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 900 -n1 877 -n2 0 -total 1777 -withname 900 -withcolor 1777 -withlayer 1777 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 900 -n1 0 -n2 0 -total 900 -withname 900 -withcolor 900 -withlayer 900 -centroid 0 -volume 0 -area 0 -colors { YELLOW } -nbcolors 1 -layers { 1 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 900 -shape 18221 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 900 -freewire 0 -freeedge 0 -sharededge 8213 -max_solid 0 -max_shell 0 -max_face 900 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.004034169186 -avg 7.709492698e-006 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
-puts "TODO CR25013 ALL: Error : 1 differences with reference data found"
+puts "TODO CR25013 ALL: Error: Max tolerance of "
+puts "TODO CR25013 ALL: Error: Avg tolerance of"
set filename CTS18546-2.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 42 ( 1091 ) Summary = 42 ( 1091 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 1038 ( 1038 ) Summary = 22098 ( 22096 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 1038 ( 1038 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 10005 ( 10004 )
-TOLERANCE : MaxTol = 0.5433123154 ( 0.5433122968 ) AvgTol = 0.002230678782 ( 0.002235663837 )
-LABELS : N0Labels = 1038 ( 1038 ) N1Labels = 0 ( 1109 ) N2Labels = 0 ( 0 ) TotalLabels = 1038 ( 2147 ) NameLabels = 1038 ( 1038 ) ColorLabels = 1038 ( 2147 ) LayerLabels = 1038 ( 2147 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = GREEN RED ( GREEN RED )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 1 ( 1 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1095 -max_faults 0
+checkxstat D_First -n0 1038 -n1 1109 -n2 0 -total 2147 -withname 1038 -withcolor 2147 -withlayer 2147 -centroid 0 -volume 0 -area 0 -colors { GREEN RED } -nbcolors 2 -layers { 1 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 1038 -shape 22096
+checkstatshape res_1 -solid 0 -shell 0 -face 1038 -freewire 0 -freeedge 0 -sharededge 10004
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.5433122968 -avg 0.002235663837]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1095 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 62 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1038 -n1 1109 -n2 0 -total 2147 -withname 1038 -withcolor 2147 -withlayer 2147 -centroid 0 -volume 0 -area 0 -nbcolors 2 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1038 -n1 0 -n2 0 -total 1038 -withname 1038 -withcolor 1038 -withlayer 1038 -centroid 0 -volume 0 -area 0 -colors { GREEN RED } -nbcolors 2 -layers { 1 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 1038 -shape 22098 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 1038 -freewire 0 -freeedge 0 -sharededge 10005 -max_solid 0 -max_shell 0 -max_face 1038 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.5433123154 -avg 0.002230678782 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename CTS18847.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 63 ( 63 ) Summary = 63 ( 63 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 1 ) Shell = 0 ( 1 ) Face = 117 ( 117 ) Summary = 1543 ( 773 )
-STATSHAPE : Solid = 0 ( 1 ) Shell = 0 ( 1 ) Face = 117 ( 117 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 652 ( 326 )
-TOLERANCE : MaxTol = 0.1300827208 ( 0.1300697287 ) AvgTol = 0.002196749552 ( 0.00567483205 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 117 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 118 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 117 ( 1 ) LayerLabels = 117 ( 1 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = DEEPSKYBLUE1 ( DEEPSKYBLUE1 )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 2 ( 2 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 63 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { DEEPSKYBLUE1 } -nbcolors 1 -layers { 2 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 117 -shape 773
+checkstatshape res_1 -solid 1 -shell 1 -face 117 -freewire 0 -freeedge 0 -sharededge 326
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.1300697287 -avg 0.00567483205]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 63 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 63 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 117 -n2 0 -total 118 -withname 1 -withcolor 117 -withlayer 117 -centroid 0 -volume 0 -area 0 -colors { DEEPSKYBLUE1 } -nbcolors 1 -layers { 2 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 117 -shape 1543 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 117 -freewire 0 -freeedge 0 -sharededge 652 -max_solid 1 -max_shell 1 -max_face 117 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.1300827208 -avg 0.002196749552 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename CTS19883.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 2 ) Summary = 0 ( 2 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 396 ( 396 ) Summary = 5044 ( 5060 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 396 ( 396 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 2133 ( 2133 )
-TOLERANCE : MaxTol = 0.9967131592 ( 0.9967131592 ) AvgTol = 0.05132244362 ( 0.05132274204 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 396 ( 37 ) N2Labels = 0 ( 0 ) TotalLabels = 397 ( 38 ) NameLabels = 1 ( 1 ) ColorLabels = 396 ( 38 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = MAGENTA1 RED ( MAGENTA1 RED )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 3 -max_faults 0
+checkxstat D_First -n0 1 -n1 37 -n2 0 -total 38 -withname 1 -withcolor 38 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { MAGENTA1 RED } -nbcolors 2 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 396 -shape 5060
+checkstatshape res_1 -solid 0 -shell 0 -face 396 -freewire 0 -freeedge 0 -sharededge 2133
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.9967131592 -avg 0.05132274204]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 3 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 37 -n2 0 -total 38 -withname 1 -withcolor 38 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 2 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 396 -n2 0 -total 397 -withname 1 -withcolor 396 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { MAGENTA1 RED } -nbcolors 2 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 396 -shape 5044 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 396 -freewire 0 -freeedge 0 -sharededge 2133 -max_solid 0 -max_shell 0 -max_face 396 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.9967131592 -avg 0.05132244362 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: COLORS : Faulty"
-
set filename CTS21137.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 160 ( 856 ) Summary = 160 ( 856 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 282 ( 282 ) Summary = 4872 ( 4872 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 282 ( 282 ) FreeWire = 0 ( 0 ) FreeEdge = 7 ( 7 ) SharedEdge = 2152 ( 2152 )
-TOLERANCE : MaxTol = 0.8210384396 ( 0.821038439 ) AvgTol = 0.007974882685 ( 0.008051453244 )
-LABELS : N0Labels = 289 ( 289 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 289 ( 289 ) NameLabels = 289 ( 289 ) ColorLabels = 101 ( 101 ) LayerLabels = 288 ( 288 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 2 ( 8 )
-COLORS : Colors = RED WHITE ( BURLYWOOD1 DARKORANGE DEEPSKYBLUE1 LEMONCHIFFON1 MAGENTA1 MEDIUMSPRINGGREEN RED WHITE )
-NLAYERS : NLayers = 9 ( 9 )
-LAYERS : Layers = 1 11 19 2 3 5 6 8 9 ( 1 11 19 2 3 5 6 8 9 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 856 -max_faults 0
+checkxstat D_First -n0 289 -n1 0 -n2 0 -total 289 -withname 289 -withcolor 101 -withlayer 288 -centroid 0 -volume 0 -area 0 -colors { BURLYWOOD1 DARKORANGE DEEPSKYBLUE1 LEMONCHIFFON1 MAGENTA1 MEDIUMSPRINGGREEN RED WHITE } -nbcolors 8 -layers { 1 11 19 2 3 5 6 8 9 } -nblayers 9
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 282 -shape 4872
+checkstatshape res_1 -solid 0 -shell 0 -face 282 -freewire 0 -freeedge 7 -sharededge 2152
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.821038439 -avg 0.008051453244]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 856 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 160 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 289 -n1 0 -n2 0 -total 289 -withname 289 -withcolor 101 -withlayer 288 -centroid 0 -volume 0 -area 0 -nbcolors 8 -nblayers 9
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 289 -n1 0 -n2 0 -total 289 -withname 289 -withcolor 101 -withlayer 288 -centroid 0 -volume 0 -area 0 -colors { RED WHITE } -nbcolors 2 -layers { 1 11 19 2 3 5 6 8 9 } -nblayers 9
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 282 -shape 4872 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 282 -freewire 0 -freeedge 7 -sharededge 2152 -max_solid 0 -max_shell 0 -max_face 282 -max_freewire 0 -max_freeedge 7
+checkmaxtol res_2 -tol 0.8210384396 -avg 0.007974882685 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: NBSHAPES : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename CTS21140.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 54 ( 197 ) Summary = 54 ( 197 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 331 ( 331 ) Summary = 6878 ( 6924 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 331 ( 331 ) FreeWire = 70 ( 116 ) FreeEdge = 1479 ( 1479 ) SharedEdge = 2967 ( 2967 )
-TOLERANCE : MaxTol = 0.6112323056 ( 0.6112323056 ) AvgTol = 0.0009101512876 ( 0.001289214856 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 481 ( 739 ) N2Labels = 0 ( 0 ) TotalLabels = 482 ( 740 ) NameLabels = 482 ( 559 ) ColorLabels = 481 ( 739 ) LayerLabels = 479 ( 737 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 8 ( 8 )
-COLORS : Colors = BLUE1 CYAN1 DARKORANGE GOLD3 PALETURQUOISE2 RED WHITE YELLOW ( BLUE1 CYAN1 DARKORANGE GOLD3 PALETURQUOISE2 RED WHITE YELLOW )
-NLAYERS : NLayers = 6 ( 6 )
-LAYERS : Layers = 15 20 25 30 50 60 ( 15 20 25 30 50 60 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 429 -max_faults 0
+checkdoc "tpstat c" -max_warns 197 -max_faults 0
+checkxstat D_First -n0 1 -n1 739 -n2 0 -total 740 -withname 559 -withcolor 739 -withlayer 737 -centroid 0 -volume 0 -area 0 -colors { BLUE1 CYAN1 DARKORANGE GOLD3 PALETURQUOISE2 RED WHITE YELLOW } -nbcolors 8 -layers { 15 20 25 30 50 60 } -nblayers 6
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 331 -shape 6924
+checkstatshape res_1 -solid 0 -shell 0 -face 331 -freewire 116 -freeedge 1479 -sharededge 2967
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.6112323056 -avg 0.001289214856]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 429 -max_faults 0
+checkdoc "tpstat c" -max_warns 197 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 54 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 739 -n2 0 -total 740 -withname 559 -withcolor 739 -withlayer 737 -centroid 0 -volume 0 -area 0 -nbcolors 8 -nblayers 6
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 481 -n2 0 -total 482 -withname 482 -withcolor 481 -withlayer 479 -centroid 0 -volume 0 -area 0 -colors { BLUE1 CYAN1 DARKORANGE GOLD3 PALETURQUOISE2 RED WHITE YELLOW } -nbcolors 8 -layers { 15 20 25 30 50 60 } -nblayers 6
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 331 -shape 6878 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 331 -freewire 70 -freeedge 1479 -sharededge 2967 -max_solid 0 -max_shell 0 -max_face 331 -max_freewire 116 -max_freeedge 1479
+checkmaxtol res_2 -tol 0.6112323056 -avg 0.0009101512876 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: NBSHAPES : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename CTS21142.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 136 ) Warnings = 49 ( 583 ) Summary = 49 ( 719 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 308 ( 308 ) Summary = 6755 ( 6756 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 308 ( 308 ) FreeWire = 6 ( 7 ) FreeEdge = 795 ( 795 ) SharedEdge = 2675 ( 2675 )
-TOLERANCE : MaxTol = 0.9778021574 ( 0.9778021574 ) AvgTol = 0.03580274709 ( 0.03579740035 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 1089 ( 2047 ) N2Labels = 0 ( 0 ) TotalLabels = 1090 ( 2048 ) NameLabels = 1090 ( 1285 ) ColorLabels = 1089 ( 2047 ) LayerLabels = 168 ( 311 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 6 ( 6 )
-COLORS : Colors = BLUE1 GREEN MAGENTA1 RED WHITE YELLOW ( BLUE1 GREEN MAGENTA1 RED WHITE YELLOW )
-NLAYERS : NLayers = 5 ( 5 )
-LAYERS : Layers = 10 101 105 15 20 ( 10 101 105 15 20 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 584 -max_faults 136
+checkxstat D_First -n0 1 -n1 2047 -n2 0 -total 2048 -withname 1285 -withcolor 2047 -withlayer 311 -centroid 0 -volume 0 -area 0 -colors { BLUE1 GREEN MAGENTA1 RED WHITE YELLOW } -nbcolors 6 -layers { 10 101 105 15 20 } -nblayers 5
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 308 -shape 6756
+checkstatshape res_1 -solid 0 -shell 0 -face 308 -freewire 7 -freeedge 795 -sharededge 2675
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.9778021574 -avg 0.03579740035]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 584 -max_faults 136
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 49 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 2047 -n2 0 -total 2048 -withname 1285 -withcolor 2047 -withlayer 311 -centroid 0 -volume 0 -area 0 -nbcolors 6 -nblayers 5
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 1089 -n2 0 -total 1090 -withname 1090 -withcolor 1089 -withlayer 168 -centroid 0 -volume 0 -area 0 -colors { BLUE1 GREEN MAGENTA1 RED WHITE YELLOW } -nbcolors 6 -layers { 10 101 105 15 20 } -nblayers 5
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 308 -shape 6755 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 308 -freewire 6 -freeedge 795 -sharededge 2675 -max_solid 0 -max_shell 0 -max_face 308 -max_freewire 7 -max_freeedge 795
+checkmaxtol res_2 -tol 0.9778021574 -avg 0.03580274709 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
-
set filename CTS21655.igs
-set ref_data {
-DATA : Faulties = 0 ( 12 ) Warnings = 0 ( 1 ) Summary = 0 ( 13 )
-TPSTAT : Faulties = 0 ( 28 ) Warnings = 116 ( 7 ) Summary = 116 ( 35 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 1 ) Solids = 0 ( 1 )
-NBSHAPES : Solid = 0 ( 18 ) Shell = 0 ( 18 ) Face = 1190 ( 1190 ) Summary = 15073 ( 7693 )
-STATSHAPE : Solid = 0 ( 18 ) Shell = 0 ( 18 ) Face = 1190 ( 1190 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 6283 ( 3134 )
-TOLERANCE : MaxTol = 0.2496383637 ( 0.2496258832 ) AvgTol = 0.00219239232 ( 0.004111699336 )
-LABELS : N0Labels = 27 ( 27 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 27 ( 27 ) NameLabels = 27 ( 27 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 1 -max_faults 12
+checkdoc "tpstat c" -max_warns 7 -max_faults 28
+checkxstat D_First -n0 27 -n1 0 -n2 0 -total 27 -withname 27 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 1 -max_solids 1
+checknbshapes res_1 -solid 18 -shell 18 -face 1190 -shape 7693
+checkstatshape res_1 -solid 18 -shell 18 -face 1190 -freewire 0 -freeedge 0 -sharededge 3134
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.2496258832 -avg 0.004111699336]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 1 -max_faults 12
+checkdoc "tpstat c" -max_warns 7 -max_faults 28
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 126 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 27 -n1 0 -n2 0 -total 27 -withname 27 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 27 -n1 0 -n2 0 -total 27 -withname 27 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 1 -max_solids 1
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 1190 -shape 15073 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 1190 -freewire 0 -freeedge 0 -sharededge 6283 -max_solid 18 -max_shell 18 -max_face 1190 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.2496383637 -avg 0.00219239232 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename t_pro_200_222_0sg_whl.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 218 ) Summary = 0 ( 218 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 0 ( 0 ) Summary = 9737 ( 9737 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 0 ( 0 ) FreeWire = 218 ( 218 ) FreeEdge = 3900 ( 3900 ) SharedEdge = 3900 ( 3900 )
-TOLERANCE : MaxTol = 1e-007 ( 1e-007 ) AvgTol = 1e-007 ( 1e-007 )
-LABELS : N0Labels = 1819 ( 1819 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1819 ( 1819 ) NameLabels = 1819 ( 1819 ) ColorLabels = 1601 ( 1819 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 6 ( 6 )
-COLORS : Colors = BLUE1 GREEN MAGENTA1 RED WHITE YELLOW ( BLUE1 GREEN MAGENTA1 RED WHITE YELLOW )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 218 -max_faults 0
+checkxstat D_First -n0 1819 -n1 0 -n2 0 -total 1819 -withname 1819 -withcolor 1819 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 GREEN MAGENTA1 RED WHITE YELLOW } -nbcolors 6 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 0 -shape 9737
+checkstatshape res_1 -solid 0 -shell 0 -face 0 -freewire 218 -freeedge 3900 -sharededge 3900
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-007 -avg 1e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 218 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1819 -n1 0 -n2 0 -total 1819 -withname 1819 -withcolor 1819 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 6 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1819 -n1 0 -n2 0 -total 1819 -withname 1819 -withcolor 1601 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 GREEN MAGENTA1 RED WHITE YELLOW } -nbcolors 6 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 0 -shape 9737 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 0 -freewire 218 -freeedge 3900 -sharededge 3900 -max_solid 0 -max_shell 0 -max_face 0 -max_freewire 218 -max_freeedge 3900
+checkmaxtol res_2 -tol 1e-007 -avg 1e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename D44-11325-6.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 2 ( 298 ) Summary = 2 ( 298 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 568 ( 568 ) Summary = 8540 ( 8540 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 568 ( 568 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 3701 ( 3701 )
-TOLERANCE : MaxTol = 0.4977710304 ( 0.4977710286 ) AvgTol = 0.001985067479 ( 0.001988149118 )
-LABELS : N0Labels = 568 ( 569 ) N1Labels = 0 ( 878 ) N2Labels = 0 ( 0 ) TotalLabels = 568 ( 1447 ) NameLabels = 568 ( 569 ) ColorLabels = 568 ( 1446 ) LayerLabels = 568 ( 1446 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = YELLOW ( YELLOW )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 1 ( 1 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 298 -max_faults 0
+checkxstat D_First -n0 569 -n1 878 -n2 0 -total 1447 -withname 569 -withcolor 1446 -withlayer 1446 -centroid 0 -volume 0 -area 0 -colors { YELLOW } -nbcolors 1 -layers { 1 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 568 -shape 8540
+checkstatshape res_1 -solid 0 -shell 0 -face 568 -freewire 0 -freeedge 0 -sharededge 3701
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.4977710286 -avg 0.001988149118]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 298 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 14 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 569 -n1 878 -n2 0 -total 1447 -withname 569 -withcolor 1446 -withlayer 1446 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 568 -n1 0 -n2 0 -total 568 -withname 568 -withcolor 568 -withlayer 568 -centroid 0 -volume 0 -area 0 -colors { YELLOW } -nbcolors 1 -layers { 1 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 568 -shape 8540 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 568 -freewire 0 -freeedge 0 -sharededge 3701 -max_solid 0 -max_shell 0 -max_face 568 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.4977710304 -avg 0.001985067479 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
puts "TODO CR23096 ALL: NBSHAPES : Faulty"
-puts "TODO CR23096 ALL: Error : 2 differences with reference data found"
+puts "TODO CR23096 ALL: Error : is WRONG because number of SHAPE entities in shape"
+puts "TODO CR23096 ALL: STATSHAPE : Faulty ref number of shared edges in command statshape"
set filename FRA62468-1.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 299 ( 5226 ) Summary = 299 ( 5226 )
-CHECKSHAPE : Wires = 12 ( 20 ) Faces = 16 ( 18 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 5163 ( 5163 ) Summary = 68422 ( 68420 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 5163 ( 5163 ) FreeWire = 10 ( 10 ) FreeEdge = 283 ( 283 ) SharedEdge = 29075 ( 29079 )
-TOLERANCE : MaxTol = 0.9874083984 ( 0.9875071265 ) AvgTol = 0.01114309412 ( 0.01115568387 )
-LABELS : N0Labels = 5392 ( 5458 ) N1Labels = 18 ( 4297 ) N2Labels = 0 ( 0 ) TotalLabels = 5410 ( 9755 ) NameLabels = 5392 ( 5458 ) ColorLabels = 5391 ( 9689 ) LayerLabels = 5391 ( 9689 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 4 ( 4 )
-COLORS : Colors = BLACK BLUE1 CYAN1 GREEN ( BLACK BLUE1 CYAN1 GREEN )
-NLAYERS : NLayers = 3 ( 3 )
-LAYERS : Layers = 1 51 6 ( 1 51 6 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 5241 -max_faults 0
+checkxstat D_First -n0 5458 -n1 4297 -n2 0 -total 9755 -withname 5458 -withcolor 9689 -withlayer 9689 -centroid 0 -volume 0 -area 0 -colors { BLACK BLUE1 CYAN1 GREEN } -nbcolors 4 -layers { 1 51 6 } -nblayers 3
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 20 -max_faces 18 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 5163 -shape 68420
+checkstatshape res_1 -solid 0 -shell 0 -face 5163 -freewire 10 -freeedge 283 -sharededge 29079
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.9875071265 -avg 0.01115568387]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 5241 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 429 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 5458 -n1 4297 -n2 0 -total 9755 -withname 5458 -withcolor 9689 -withlayer 9689 -centroid 0 -volume 0 -area 0 -nbcolors 4 -nblayers 3
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 5392 -n1 18 -n2 0 -total 5410 -withname 5392 -withcolor 5391 -withlayer 5391 -centroid 0 -volume 0 -area 0 -colors { BLACK BLUE1 CYAN1 GREEN } -nbcolors 4 -layers { 1 51 6 } -nblayers 3
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 20 -max_faces 18 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 12 -max_faces 16 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 5163 -shape 68422 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 5163 -freewire 10 -freeedge 283 -sharededge 29075 -max_solid 0 -max_shell 0 -max_face 5163 -max_freewire 10 -max_freeedge 283
+checkmaxtol res_2 -tol 0.9874083984 -avg 0.01114309412 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename GER60736.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 1 ) Summary = 0 ( 1 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 550 ( 814 ) Summary = 550 ( 814 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 406 ( 406 ) Summary = 23055 ( 23055 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 406 ( 406 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 11143 ( 11143 )
-TOLERANCE : MaxTol = 1.005912368e-005 ( 1.005909788e-005 ) AvgTol = 6.288458987e-007 ( 9.442593263e-006 )
-LABELS : N0Labels = 406 ( 406 ) N1Labels = 0 ( 282 ) N2Labels = 0 ( 0 ) TotalLabels = 406 ( 688 ) NameLabels = 406 ( 406 ) ColorLabels = 406 ( 688 ) LayerLabels = 406 ( 688 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 6 ( 6 )
-COLORS : Colors = CYAN1 GREEN MAGENTA1 RED WHITE YELLOW ( CYAN1 GREEN MAGENTA1 RED WHITE YELLOW )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 1 ( 1 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 814 -max_faults 0
+checkxstat D_First -n0 406 -n1 282 -n2 0 -total 688 -withname 406 -withcolor 688 -withlayer 688 -centroid 0 -volume 0 -area 0 -colors { CYAN1 GREEN MAGENTA1 RED WHITE YELLOW } -nbcolors 6 -layers { 1 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 406 -shape 23055
+checkstatshape res_1 -solid 0 -shell 0 -face 406 -freewire 0 -freeedge 0 -sharededge 11143
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.005909788e-005 -avg 9.442593263e-006]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 814 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 550 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 406 -n1 282 -n2 0 -total 688 -withname 406 -withcolor 688 -withlayer 688 -centroid 0 -volume 0 -area 0 -nbcolors 6 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 406 -n1 0 -n2 0 -total 406 -withname 406 -withcolor 406 -withlayer 406 -centroid 0 -volume 0 -area 0 -colors { CYAN1 GREEN MAGENTA1 RED WHITE YELLOW } -nbcolors 6 -layers { 1 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 406 -shape 23055 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 406 -freewire 0 -freeedge 0 -sharededge 11143 -max_solid 0 -max_shell 0 -max_face 406 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.005912368e-005 -avg 6.288458987e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename pro6562.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 223 ( 59 ) Summary = 223 ( 59 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 1 ) Shell = 0 ( 1 ) Face = 258 ( 258 ) Summary = 3661 ( 2116 )
-STATSHAPE : Solid = 0 ( 1 ) Shell = 0 ( 1 ) Face = 258 ( 258 ) FreeWire = 0 ( 0 ) FreeEdge = 187 ( 187 ) SharedEdge = 1471 ( 821 )
-TOLERANCE : MaxTol = 0.03577770393 ( 0.05584689429 ) AvgTol = 0.00102333566 ( 0.004315163006 )
-LABELS : N0Labels = 188 ( 188 ) N1Labels = 258 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 446 ( 188 ) NameLabels = 188 ( 188 ) ColorLabels = 445 ( 188 ) LayerLabels = 445 ( 188 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = RED ( RED )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 10 ( 10 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 59 -max_faults 0
+checkxstat D_First -n0 188 -n1 0 -n2 0 -total 188 -withname 188 -withcolor 188 -withlayer 188 -centroid 0 -volume 0 -area 0 -colors { RED } -nbcolors 1 -layers { 10 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 258 -shape 2116
+checkstatshape res_1 -solid 1 -shell 1 -face 258 -freewire 0 -freeedge 187 -sharededge 821
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.05584689429 -avg 0.004315163006]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 59 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 223 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 188 -n1 0 -n2 0 -total 188 -withname 188 -withcolor 188 -withlayer 188 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 188 -n1 258 -n2 0 -total 446 -withname 188 -withcolor 445 -withlayer 445 -centroid 0 -volume 0 -area 0 -colors { RED } -nbcolors 1 -layers { 10 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 258 -shape 3661 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 258 -freewire 0 -freeedge 187 -sharededge 1471 -max_solid 1 -max_shell 1 -max_face 258 -max_freewire 0 -max_freeedge 187
+checkmaxtol res_2 -tol 0.03577770393 -avg 0.00102333566 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename lh3d_px1.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 442 ( 442 ) Summary = 4421 ( 4421 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 442 ( 442 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 1768 ( 1768 )
-TOLERANCE : MaxTol = 1e-007 ( 1e-007 ) AvgTol = 1e-007 ( 1e-007 )
-LABELS : N0Labels = 442 ( 442 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 442 ( 442 ) NameLabels = 442 ( 442 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 442 -n1 0 -n2 0 -total 442 -withname 442 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 442 -shape 4421
+checkstatshape res_1 -solid 0 -shell 0 -face 442 -freewire 0 -freeedge 0 -sharededge 1768
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-007 -avg 1e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 442 -n1 0 -n2 0 -total 442 -withname 442 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 442 -n1 0 -n2 0 -total 442 -withname 442 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 442 -shape 4421 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 442 -freewire 0 -freeedge 0 -sharededge 1768 -max_solid 0 -max_shell 0 -max_face 442 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1e-007 -avg 1e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename lh3d_px2.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 844 ( 844 ) Summary = 8441 ( 8441 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 844 ( 844 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 3376 ( 3376 )
-TOLERANCE : MaxTol = 1e-007 ( 1e-007 ) AvgTol = 1e-007 ( 1e-007 )
-LABELS : N0Labels = 844 ( 844 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 844 ( 844 ) NameLabels = 844 ( 844 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 844 -n1 0 -n2 0 -total 844 -withname 844 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 844 -shape 8441
+checkstatshape res_1 -solid 0 -shell 0 -face 844 -freewire 0 -freeedge 0 -sharededge 3376
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-007 -avg 1e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 844 -n1 0 -n2 0 -total 844 -withname 844 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 844 -n1 0 -n2 0 -total 844 -withname 844 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 844 -shape 8441 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 844 -freewire 0 -freeedge 0 -sharededge 3376 -max_solid 0 -max_shell 0 -max_face 844 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1e-007 -avg 1e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: CHECKSHAPE : Faulty"
-
set filename sim6114.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 4 ( 377 ) Summary = 4 ( 377 )
-CHECKSHAPE : Wires = 5 ( 1 ) Faces = 5 ( 1 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 2344 ( 2344 ) Summary = 27882 ( 27881 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 2344 ( 2344 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 11623 ( 11622 )
-TOLERANCE : MaxTol = 0.04263273989 ( 0.04263273988 ) AvgTol = 0.0001295820704 ( 0.0001295068497 )
-LABELS : N0Labels = 2344 ( 2344 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 2344 ( 2344 ) NameLabels = 2344 ( 2344 ) ColorLabels = 2344 ( 2344 ) LayerLabels = 2344 ( 2344 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = CYAN1 RED ( CYAN1 RED )
-NLAYERS : NLayers = 4 ( 4 )
-LAYERS : Layers = 1 3 5 9 ( 1 3 5 9 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 377 -max_faults 0
+checkxstat D_First -n0 2344 -n1 0 -n2 0 -total 2344 -withname 2344 -withcolor 2344 -withlayer 2344 -centroid 0 -volume 0 -area 0 -colors { CYAN1 RED } -nbcolors 2 -layers { 1 3 5 9 } -nblayers 4
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 1 -max_faces 1 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 2344 -shape 27881
+checkstatshape res_1 -solid 0 -shell 0 -face 2344 -freewire 0 -freeedge 0 -sharededge 11622
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.04263273988 -avg 0.0001295068497]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 377 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 5 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 2344 -n1 0 -n2 0 -total 2344 -withname 2344 -withcolor 2344 -withlayer 2344 -centroid 0 -volume 0 -area 0 -nbcolors 2 -nblayers 4
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 2344 -n1 0 -n2 0 -total 2344 -withname 2344 -withcolor 2344 -withlayer 2344 -centroid 0 -volume 0 -area 0 -colors { CYAN1 RED } -nbcolors 2 -layers { 1 3 5 9 } -nblayers 4
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 1 -max_faces 1 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 5 -max_faces 5 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 2344 -shape 27882 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 2344 -freewire 0 -freeedge 0 -sharededge 11623 -max_solid 0 -max_shell 0 -max_face 2344 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.04263273989 -avg 0.0001295820704 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: NBSHAPES : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
-set LinuxDiff 3
-set LinuxFaulties {STATSHAPE TOLERANCE}
set filename Inner.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 35 ( 890 ) Summary = 35 ( 890 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 392 ( 392 ) Summary = 10882 ( 10908 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 392 ( 392 ) FreeWire = 97 ( 121 ) FreeEdge = 1546 ( 1546 ) SharedEdge = 4308 ( 4310 )
-TOLERANCE : MaxTol = 0.9393822539 ( 0.9393822539 ) AvgTol = 0.01258756217 ( 0.0125611438 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 1695 ( 3503 ) N2Labels = 0 ( 0 ) TotalLabels = 1696 ( 3504 ) NameLabels = 1696 ( 1972 ) ColorLabels = 1695 ( 3503 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 4 ( 4 )
-COLORS : Colors = BLUE1 GREEN WHITE YELLOW ( BLUE1 GREEN WHITE YELLOW )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 887 -max_faults 0
+checkxstat D_First -n0 1 -n1 3503 -n2 0 -total 3504 -withname 1972 -withcolor 3503 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 GREEN WHITE YELLOW } -nbcolors 4 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 392 -shape 10908
+checkstatshape res_1 -solid 0 -shell 0 -face 392 -freewire 121 -freeedge 1546 -sharededge 4310
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.9393822539 -avg 0.0125611438]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 887 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 35 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 3503 -n2 0 -total 3504 -withname 1972 -withcolor 3503 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 4 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 1695 -n2 0 -total 1696 -withname 1696 -withcolor 1695 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 GREEN WHITE YELLOW } -nbcolors 4 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 392 -shape 10882 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 392 -freewire 97 -freeedge 1546 -sharededge 4308 -max_solid 0 -max_shell 0 -max_face 392 -max_freewire 121 -max_freeedge 1546
+checkmaxtol res_2 -tol 0.9393822539 -avg 0.01258756217 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename Inventor_scissor.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 1 ) Summary = 0 ( 1 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 94 ) Summary = 0 ( 94 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 90 ( 90 ) Summary = 1157 ( 1151 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 90 ( 90 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 498 ( 492 )
-TOLERANCE : MaxTol = 0.0004488403826 ( 0.0004487950678 ) AvgTol = 5.999008312e-006 ( 6.427182608e-006 )
-LABELS : N0Labels = 3 ( 6 ) N1Labels = 90 ( 90 ) N2Labels = 0 ( 0 ) TotalLabels = 93 ( 96 ) NameLabels = 3 ( 6 ) ColorLabels = 90 ( 90 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = GRAY31 GRAY66 ( GRAY31 GRAY66 )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 94 -max_faults 0
+checkxstat D_First -n0 6 -n1 90 -n2 0 -total 96 -withname 6 -withcolor 90 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { GRAY31 GRAY66 } -nbcolors 2 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 90 -shape 1151
+checkstatshape res_1 -solid 0 -shell 0 -face 90 -freewire 0 -freeedge 0 -sharededge 492
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.0004487950678 -avg 6.427182608e-006]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 94 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 6 -n1 90 -n2 0 -total 96 -withname 6 -withcolor 90 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 2 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 90 -n2 0 -total 93 -withname 3 -withcolor 90 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { GRAY31 GRAY66 } -nbcolors 2 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 90 -shape 1157 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 90 -freewire 0 -freeedge 0 -sharededge 498 -max_solid 0 -max_shell 0 -max_face 90 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.0004488403826 -avg 5.999008312e-006 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename JAP0005.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 2 ) Warnings = 272 ( 1839 ) Summary = 272 ( 1841 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 1041 ( 1041 ) Summary = 15066 ( 15066 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 1041 ( 1041 ) FreeWire = 90 ( 90 ) FreeEdge = 701 ( 701 ) SharedEdge = 6184 ( 6184 )
-TOLERANCE : MaxTol = 0.90877121 ( 0.9087712052 ) AvgTol = 0.01331864791 ( 0.01331886464 )
-LABELS : N0Labels = 1571 ( 1571 ) N1Labels = 0 ( 612 ) N2Labels = 0 ( 0 ) TotalLabels = 1571 ( 2183 ) NameLabels = 1571 ( 2173 ) ColorLabels = 1481 ( 2183 ) LayerLabels = 1481 ( 2183 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 4 ( 4 )
-COLORS : Colors = GREEN MAGENTA1 RED YELLOW ( GREEN MAGENTA1 RED YELLOW )
-NLAYERS : NLayers = 8 ( 8 )
-LAYERS : Layers = 1 10 100 20 30 40 50 60 ( 1 10 100 20 30 40 50 60 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1846 -max_faults 2
+checkxstat D_First -n0 1571 -n1 612 -n2 0 -total 2183 -withname 2173 -withcolor 2183 -withlayer 2183 -centroid 0 -volume 0 -area 0 -colors { GREEN MAGENTA1 RED YELLOW } -nbcolors 4 -layers { 1 10 100 20 30 40 50 60 } -nblayers 8
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 1041 -shape 15066
+checkstatshape res_1 -solid 0 -shell 0 -face 1041 -freewire 90 -freeedge 701 -sharededge 6184
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.9087712052 -avg 0.01331886464]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1846 -max_faults 2
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 274 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1571 -n1 612 -n2 0 -total 2183 -withname 2173 -withcolor 2183 -withlayer 2183 -centroid 0 -volume 0 -area 0 -nbcolors 4 -nblayers 8
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1571 -n1 0 -n2 0 -total 1571 -withname 1571 -withcolor 1481 -withlayer 1481 -centroid 0 -volume 0 -area 0 -colors { GREEN MAGENTA1 RED YELLOW } -nbcolors 4 -layers { 1 10 100 20 30 40 50 60 } -nblayers 8
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 1041 -shape 15066 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 1041 -freewire 90 -freeedge 701 -sharededge 6184 -max_solid 0 -max_shell 0 -max_face 1041 -max_freewire 90 -max_freeedge 701
+checkmaxtol res_2 -tol 0.90877121 -avg 0.01331864791 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename JAP60047.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 227 ( 739 ) Summary = 227 ( 739 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 313 ( 313 ) Summary = 4726 ( 4726 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 313 ( 313 ) FreeWire = 15 ( 15 ) FreeEdge = 271 ( 271 ) SharedEdge = 1945 ( 1945 )
-TOLERANCE : MaxTol = 0.9840868681 ( 0.9840868681 ) AvgTol = 0.04919782236 ( 0.04919780582 )
-LABELS : N0Labels = 516 ( 516 ) N1Labels = 0 ( 229 ) N2Labels = 0 ( 0 ) TotalLabels = 516 ( 745 ) NameLabels = 516 ( 745 ) ColorLabels = 501 ( 745 ) LayerLabels = 501 ( 745 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = RED YELLOW ( RED YELLOW )
-NLAYERS : NLayers = 2 ( 2 )
-LAYERS : Layers = 2 4 ( 2 4 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 746 -max_faults 0
+checkxstat D_First -n0 516 -n1 229 -n2 0 -total 745 -withname 745 -withcolor 745 -withlayer 745 -centroid 0 -volume 0 -area 0 -colors { RED YELLOW } -nbcolors 2 -layers { 2 4 } -nblayers 2
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 313 -shape 4726
+checkstatshape res_1 -solid 0 -shell 0 -face 313 -freewire 15 -freeedge 271 -sharededge 1945
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.9840868681 -avg 0.04919780582]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 746 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 227 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 516 -n1 229 -n2 0 -total 745 -withname 745 -withcolor 745 -withlayer 745 -centroid 0 -volume 0 -area 0 -nbcolors 2 -nblayers 2
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 516 -n1 0 -n2 0 -total 516 -withname 516 -withcolor 501 -withlayer 501 -centroid 0 -volume 0 -area 0 -colors { RED YELLOW } -nbcolors 2 -layers { 2 4 } -nblayers 2
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 313 -shape 4726 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 313 -freewire 15 -freeedge 271 -sharededge 1945 -max_solid 0 -max_shell 0 -max_face 313 -max_freewire 15 -max_freeedge 271
+checkmaxtol res_2 -tol 0.9840868681 -avg 0.04919782236 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename PRO10105.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 18 ( 62 ) Summary = 18 ( 62 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 230 ( 230 ) Summary = 2910 ( 2906 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 230 ( 230 ) FreeWire = 1 ( 1 ) FreeEdge = 63 ( 63 ) SharedEdge = 1195 ( 1193 )
-TOLERANCE : MaxTol = 0.06012224669 ( 0.1346852729 ) AvgTol = 0.001347528763 ( 0.001523930617 )
-LABELS : N0Labels = 292 ( 292 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 292 ( 292 ) NameLabels = 292 ( 292 ) ColorLabels = 291 ( 292 ) LayerLabels = 247 ( 248 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 4 ( 4 )
-COLORS : Colors = BURLYWOOD1 DEEPSKYBLUE1 RED WHITE ( BURLYWOOD1 DEEPSKYBLUE1 RED WHITE )
-NLAYERS : NLayers = 3 ( 3 )
-LAYERS : Layers = 1 2 3 ( 1 2 3 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 67 -max_faults 0
+checkxstat D_First -n0 292 -n1 0 -n2 0 -total 292 -withname 292 -withcolor 292 -withlayer 248 -centroid 0 -volume 0 -area 0 -colors { BURLYWOOD1 DEEPSKYBLUE1 RED WHITE } -nbcolors 4 -layers { 1 2 3 } -nblayers 3
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 230 -shape 2906
+checkstatshape res_1 -solid 0 -shell 0 -face 230 -freewire 1 -freeedge 63 -sharededge 1193
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.1346852729 -avg 0.001523930617]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 67 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 18 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 292 -n1 0 -n2 0 -total 292 -withname 292 -withcolor 292 -withlayer 248 -centroid 0 -volume 0 -area 0 -nbcolors 4 -nblayers 3
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 292 -n1 0 -n2 0 -total 292 -withname 292 -withcolor 291 -withlayer 247 -centroid 0 -volume 0 -area 0 -colors { BURLYWOOD1 DEEPSKYBLUE1 RED WHITE } -nbcolors 4 -layers { 1 2 3 } -nblayers 3
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 230 -shape 2910 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 230 -freewire 1 -freeedge 63 -sharededge 1195 -max_solid 0 -max_shell 0 -max_face 230 -max_freewire 1 -max_freeedge 63
+checkmaxtol res_2 -tol 0.06012224669 -avg 0.001347528763 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TOLERANCE : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
+set filename PRO10578.igs
-set filename PRO10578.igs
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 895 -max_faults 0
+checkxstat D_First -n0 232 -n1 6150 -n2 0 -total 6382 -withname 347 -withcolor 6382 -withlayer 6382 -centroid 0 -volume 0 -area 0 -colors { RED } -nbcolors 1 -layers { 1 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 221 -shape 13351
+checkstatshape res_1 -solid 0 -shell 0 -face 221 -freewire 0 -freeedge 6 -sharededge 6452
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.01098786532 -avg 0.0001806163302]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 895 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 146 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 232 -n1 6150 -n2 0 -total 6382 -withname 347 -withcolor 6382 -withlayer 6382 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 232 -n1 0 -n2 0 -total 232 -withname 232 -withcolor 227 -withlayer 227 -centroid 0 -volume 0 -area 0 -colors { RED } -nbcolors 1 -layers { 1 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 221 -shape 13351 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 221 -freewire 0 -freeedge 6 -sharededge 6452 -max_solid 0 -max_shell 0 -max_face 221 -max_freewire 0 -max_freeedge 6
+checkmaxtol res_2 -tol 0.01225213609 -avg 0.0001816430452 -max_tol ${max_tol_res_1}
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 146 ( 887 ) Summary = 146 ( 887 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 221 ( 221 ) Summary = 13351 ( 13351 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 221 ( 221 ) FreeWire = 0 ( 0 ) FreeEdge = 6 ( 6 ) SharedEdge = 6452 ( 6452 )
-TOLERANCE : MaxTol = 0.01225213609 ( 0.01098786532 ) AvgTol = 0.0001816430452 ( 0.0001806163302 )
-LABELS : N0Labels = 232 ( 232 ) N1Labels = 0 ( 6150 ) N2Labels = 0 ( 0 ) TotalLabels = 232 ( 6382 ) NameLabels = 232 ( 347 ) ColorLabels = 227 ( 6382 ) LayerLabels = 227 ( 6382 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = RED ( RED )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 1 ( 1 )
-
-}
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename PRO11414-2.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 268 ) Summary = 0 ( 268 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 186 ( 186 ) Summary = 10670 ( 10670 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 186 ( 186 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 5148 ( 5148 )
-TOLERANCE : MaxTol = 0.04931043567 ( 0.04931014771 ) AvgTol = 0.000378470309 ( 0.0003854574649 )
-LABELS : N0Labels = 186 ( 186 ) N1Labels = 0 ( 201 ) N2Labels = 0 ( 0 ) TotalLabels = 186 ( 387 ) NameLabels = 186 ( 186 ) ColorLabels = 186 ( 387 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = WHITE ( WHITE )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 270 -max_faults 0
+checkxstat D_First -n0 186 -n1 201 -n2 0 -total 387 -withname 186 -withcolor 387 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 186 -shape 10670
+checkstatshape res_1 -solid 0 -shell 0 -face 186 -freewire 0 -freeedge 0 -sharededge 5148
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.04931014771 -avg 0.0003854574649]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 270 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 186 -n1 201 -n2 0 -total 387 -withname 186 -withcolor 387 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 186 -n1 0 -n2 0 -total 186 -withname 186 -withcolor 186 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 186 -shape 10670 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 186 -freewire 0 -freeedge 0 -sharededge 5148 -max_solid 0 -max_shell 0 -max_face 186 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.04931043567 -avg 0.000378470309 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename PRO14318.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 20 ( 108 ) Summary = 20 ( 108 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 115 ( 115 ) Summary = 3126 ( 3122 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 115 ( 115 ) FreeWire = 4 ( 4 ) FreeEdge = 175 ( 175 ) SharedEdge = 1361 ( 1361 )
-TOLERANCE : MaxTol = 0.4134968839 ( 0.4134968924 ) AvgTol = 0.006591901502 ( 0.006635492146 )
-LABELS : N0Labels = 278 ( 286 ) N1Labels = 6 ( 151 ) N2Labels = 0 ( 0 ) TotalLabels = 284 ( 437 ) NameLabels = 278 ( 286 ) ColorLabels = 270 ( 429 ) LayerLabels = 270 ( 429 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = RED ( RED )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 157 ( 157 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 110 -max_faults 0
+checkxstat D_First -n0 286 -n1 151 -n2 0 -total 437 -withname 286 -withcolor 429 -withlayer 429 -centroid 0 -volume 0 -area 0 -colors { RED } -nbcolors 1 -layers { 157 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 115 -shape 3122
+checkstatshape res_1 -solid 0 -shell 0 -face 115 -freewire 4 -freeedge 175 -sharededge 1361
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.4134968924 -avg 0.006635492146]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 110 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 24 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 286 -n1 151 -n2 0 -total 437 -withname 286 -withcolor 429 -withlayer 429 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 278 -n1 6 -n2 0 -total 284 -withname 278 -withcolor 270 -withlayer 270 -centroid 0 -volume 0 -area 0 -colors { RED } -nbcolors 1 -layers { 157 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 115 -shape 3126 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 115 -freewire 4 -freeedge 175 -sharededge 1361 -max_solid 0 -max_shell 0 -max_face 115 -max_freewire 4 -max_freeedge 175
+checkmaxtol res_2 -tol 0.4134968839 -avg 0.006591901502 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
puts "TODO CR23096 ALL: NBSHAPES : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
-set LinuxDiff 3
set filename PRO14319.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 1 ( 0 ) Warnings = 3 ( 64 ) Summary = 4 ( 64 )
-CHECKSHAPE : Wires = 3 ( 5 ) Faces = 1 ( 1 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 61 ( 61 ) Summary = 7731 ( 7831 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 61 ( 61 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 3842 ( 3895 )
-TOLERANCE : MaxTol = 0.3140268251 ( 0.3140268243 ) AvgTol = 0.0009762560334 ( 0.000488212708 )
-LABELS : N0Labels = 61 ( 61 ) N1Labels = 0 ( 1080 ) N2Labels = 0 ( 0 ) TotalLabels = 61 ( 1141 ) NameLabels = 61 ( 61 ) ColorLabels = 61 ( 1141 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 3 ( 3 )
-COLORS : Colors = CYAN1 GREEN WHITE ( CYAN1 GREEN WHITE )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 64 -max_faults 0
+checkxstat D_First -n0 61 -n1 1080 -n2 0 -total 1141 -withname 61 -withcolor 1141 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { CYAN1 GREEN WHITE } -nbcolors 3 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 5 -max_faces 1 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 61 -shape 7831
+checkstatshape res_1 -solid 0 -shell 0 -face 61 -freewire 0 -freeedge 0 -sharededge 3895
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.3140268243 -avg 0.000488212708]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 64 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 3 -max_faults 1
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 61 -n1 1080 -n2 0 -total 1141 -withname 61 -withcolor 1141 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 3 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 61 -n1 0 -n2 0 -total 61 -withname 61 -withcolor 61 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { CYAN1 GREEN WHITE } -nbcolors 3 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 5 -max_faces 1 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 3 -max_faces 1 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 61 -shape 7731 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 61 -freewire 0 -freeedge 0 -sharededge 3842 -max_solid 0 -max_shell 0 -max_face 61 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.3140268251 -avg 0.0009762560334 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename PRO14665.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 347 ( 691 ) Summary = 347 ( 691 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 2297 ( 2297 ) Summary = 26114 ( 26114 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 2297 ( 2297 ) FreeWire = 0 ( 0 ) FreeEdge = 22 ( 22 ) SharedEdge = 10774 ( 10774 )
-TOLERANCE : MaxTol = 0.2778575821 ( 0.2778575802 ) AvgTol = 0.00113643717 ( 0.001128576508 )
-LABELS : N0Labels = 2329 ( 2329 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 2329 ( 2329 ) NameLabels = 2329 ( 2329 ) ColorLabels = 2319 ( 2329 ) LayerLabels = 2319 ( 2329 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 8 ( 8 )
-COLORS : Colors = CYAN1 CYAN2 GREEN LEMONCHIFFON1 MAGENTA1 MAGENTA2 WHITE YELLOW ( CYAN1 CYAN2 GREEN LEMONCHIFFON1 MAGENTA1 MAGENTA2 WHITE YELLOW )
-NLAYERS : NLayers = 10 ( 10 )
-LAYERS : Layers = 80 81 82 83 84 85 90 91 92 93 ( 80 81 82 83 84 85 90 91 92 93 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 734 -max_faults 0
+checkxstat D_First -n0 2329 -n1 0 -n2 0 -total 2329 -withname 2329 -withcolor 2329 -withlayer 2329 -centroid 0 -volume 0 -area 0 -colors { CYAN1 CYAN2 GREEN LEMONCHIFFON1 MAGENTA1 MAGENTA2 WHITE YELLOW } -nbcolors 8 -layers { 80 81 82 83 84 85 90 91 92 93 } -nblayers 10
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 2297 -shape 26114
+checkstatshape res_1 -solid 0 -shell 0 -face 2297 -freewire 0 -freeedge 22 -sharededge 10774
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.2778575802 -avg 0.001128576508]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 734 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 345 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 2329 -n1 0 -n2 0 -total 2329 -withname 2329 -withcolor 2329 -withlayer 2329 -centroid 0 -volume 0 -area 0 -nbcolors 8 -nblayers 10
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 2329 -n1 0 -n2 0 -total 2329 -withname 2329 -withcolor 2319 -withlayer 2319 -centroid 0 -volume 0 -area 0 -colors { CYAN1 CYAN2 GREEN LEMONCHIFFON1 MAGENTA1 MAGENTA2 WHITE YELLOW } -nbcolors 8 -layers { 80 81 82 83 84 85 90 91 92 93 } -nblayers 10
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 2297 -shape 26114 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 2297 -freewire 0 -freeedge 22 -sharededge 10774 -max_solid 0 -max_shell 0 -max_face 2297 -max_freewire 0 -max_freeedge 22
+checkmaxtol res_2 -tol 0.2778575821 -avg 0.00113643717 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
puts "TODO CR25923 ALL: STATSHAPE : Faulty"
-set LinuxDiff 4
set filename y306351fM.igs
-set ref_data {
-DATA : Faulties = 0 ( 1 ) Warnings = 0 ( 0 ) Summary = 0 ( 1 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 180 ( 951 ) Summary = 180 ( 951 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 1 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 392 ( 390 ) Summary = 11570 ( 11567 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 392 ( 390 ) FreeWire = 20 ( 20 ) FreeEdge = 1157 ( 1157 ) SharedEdge = 4814 ( 4814 )
-TOLERANCE : MaxTol = 1e-005 ( 1.00030003e-005 ) AvgTol = 1.800816884e-007 ( 7.374328327e-006 )
-LABELS : N0Labels = 1528 ( 1528 ) N1Labels = 0 ( 1296 ) N2Labels = 0 ( 0 ) TotalLabels = 1528 ( 2824 ) NameLabels = 1528 ( 1528 ) ColorLabels = 1507 ( 2824 ) LayerLabels = 1504 ( 2820 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 3 ( 3 )
-COLORS : Colors = BLUE1 CYAN1 WHITE ( BLUE1 CYAN1 WHITE )
-NLAYERS : NLayers = 2 ( 2 )
-LAYERS : Layers = 1 2 ( 1 2 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 1
+checkdoc "tpstat c" -max_warns 951 -max_faults 0
+checkxstat D_First -n0 1528 -n1 1296 -n2 0 -total 2824 -withname 1528 -withcolor 2824 -withlayer 2820 -centroid 0 -volume 0 -area 0 -colors { BLUE1 CYAN1 WHITE } -nbcolors 3 -layers { 1 2 } -nblayers 2
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 1 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 390 -shape 11567
+checkstatshape res_1 -solid 0 -shell 0 -face 390 -freewire 20 -freeedge 1157 -sharededge 4814
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.00030003e-005 -avg 7.374328327e-006]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 1
+checkdoc "tpstat c" -max_warns 951 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 180 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1528 -n1 1296 -n2 0 -total 2824 -withname 1528 -withcolor 2824 -withlayer 2820 -centroid 0 -volume 0 -area 0 -nbcolors 3 -nblayers 2
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1528 -n1 0 -n2 0 -total 1528 -withname 1528 -withcolor 1507 -withlayer 1504 -centroid 0 -volume 0 -area 0 -colors { BLUE1 CYAN1 WHITE } -nbcolors 3 -layers { 1 2 } -nblayers 2
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 1 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 392 -shape 11570 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 392 -freewire 20 -freeedge 1157 -sharededge 4814 -max_solid 0 -max_shell 0 -max_face 390 -max_freewire 20 -max_freeedge 1157
+checkmaxtol res_2 -tol 1e-005 -avg 1.800816884e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: NBSHAPES : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename Caliper.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 70 ( 488 ) Summary = 70 ( 488 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 215 ( 215 ) Summary = 3771 ( 3779 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 215 ( 215 ) FreeWire = 0 ( 4 ) FreeEdge = 8 ( 8 ) SharedEdge = 1666 ( 1670 )
-TOLERANCE : MaxTol = 0.6931734571 ( 0.6931734576 ) AvgTol = 0.009873021128 ( 0.009847667242 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 223 ( 1186 ) N2Labels = 0 ( 0 ) TotalLabels = 224 ( 1187 ) NameLabels = 224 ( 332 ) ColorLabels = 223 ( 1186 ) LayerLabels = 223 ( 1186 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = GREEN WHITE ( GREEN WHITE )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 2 ( 2 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 497 -max_faults 0
+checkxstat D_First -n0 1 -n1 1186 -n2 0 -total 1187 -withname 332 -withcolor 1186 -withlayer 1186 -centroid 0 -volume 0 -area 0 -colors { GREEN WHITE } -nbcolors 2 -layers { 2 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 215 -shape 3779
+checkstatshape res_1 -solid 0 -shell 0 -face 215 -freewire 4 -freeedge 8 -sharededge 1670
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.6931734576 -avg 0.009847667242]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 497 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 72 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 1186 -n2 0 -total 1187 -withname 332 -withcolor 1186 -withlayer 1186 -centroid 0 -volume 0 -area 0 -nbcolors 2 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 223 -n2 0 -total 224 -withname 224 -withcolor 223 -withlayer 223 -centroid 0 -volume 0 -area 0 -colors { GREEN WHITE } -nbcolors 2 -layers { 2 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 215 -shape 3771 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 215 -freewire 0 -freeedge 8 -sharededge 1666 -max_solid 0 -max_shell 0 -max_face 215 -max_freewire 4 -max_freeedge 8
+checkmaxtol res_2 -tol 0.6931734571 -avg 0.009873021128 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename PRO18777-2.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 4 ( 79 ) Summary = 4 ( 79 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 178 ( 178 ) Summary = 2133 ( 2133 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 178 ( 178 ) FreeWire = 0 ( 0 ) FreeEdge = 1 ( 1 ) SharedEdge = 895 ( 895 )
-TOLERANCE : MaxTol = 0.4113920266 ( 0.4113920255 ) AvgTol = 0.004711547931 ( 0.004740618934 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 179 ( 547 ) N2Labels = 0 ( 0 ) TotalLabels = 180 ( 548 ) NameLabels = 180 ( 332 ) ColorLabels = 179 ( 547 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = WHITE ( WHITE )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 87 -max_faults 0
+checkxstat D_First -n0 1 -n1 547 -n2 0 -total 548 -withname 332 -withcolor 547 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 178 -shape 2133
+checkstatshape res_1 -solid 0 -shell 0 -face 178 -freewire 0 -freeedge 1 -sharededge 895
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.4113920255 -avg 0.004740618934]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 87 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 547 -n2 0 -total 548 -withname 332 -withcolor 547 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 179 -n2 0 -total 180 -withname 180 -withcolor 179 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 178 -shape 2133 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 178 -freewire 0 -freeedge 1 -sharededge 895 -max_solid 0 -max_shell 0 -max_face 178 -max_freewire 0 -max_freeedge 1
+checkmaxtol res_2 -tol 0.4113920266 -avg 0.004711547931 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TOLERANCE : Faulty"
-
set filename lh3d_ro1.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 28 ) Summary = 0 ( 28 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 322 ( 322 ) Summary = 3460 ( 3460 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 322 ( 322 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 1407 ( 1407 )
-TOLERANCE : MaxTol = 2.657548494e-005 ( 1e-005 ) AvgTol = 7.614161036e-007 ( 1.244067797e-006 )
-LABELS : N0Labels = 321 ( 321 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 321 ( 321 ) NameLabels = 321 ( 321 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 28 -max_faults 0
+checkxstat D_First -n0 321 -n1 0 -n2 0 -total 321 -withname 321 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 322 -shape 3460
+checkstatshape res_1 -solid 0 -shell 0 -face 322 -freewire 0 -freeedge 0 -sharededge 1407
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-005 -avg 1.244067797e-006]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 28 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 321 -n1 0 -n2 0 -total 321 -withname 321 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 321 -n1 0 -n2 0 -total 321 -withname 321 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 322 -shape 3460 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 322 -freewire 0 -freeedge 0 -sharededge 1407 -max_solid 0 -max_shell 0 -max_face 322 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 2.657548494e-005 -avg 7.614161036e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename PRO9505.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 1 ) Summary = 0 ( 1 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 43 ( 190 ) Summary = 43 ( 190 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 126 ( 126 ) Summary = 2004 ( 2004 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 126 ( 126 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 874 ( 874 )
-TOLERANCE : MaxTol = 0.956222643 ( 0.956222643 ) AvgTol = 0.02522398209 ( 0.02522535543 )
-LABELS : N0Labels = 126 ( 126 ) N1Labels = 0 ( 129 ) N2Labels = 0 ( 0 ) TotalLabels = 126 ( 255 ) NameLabels = 126 ( 255 ) ColorLabels = 126 ( 255 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = GREEN ( GREEN )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 194 -max_faults 0
+checkxstat D_First -n0 126 -n1 129 -n2 0 -total 255 -withname 255 -withcolor 255 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { GREEN } -nbcolors 1 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 126 -shape 2004
+checkstatshape res_1 -solid 0 -shell 0 -face 126 -freewire 0 -freeedge 0 -sharededge 874
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.956222643 -avg 0.02522535543]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 194 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 43 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 126 -n1 129 -n2 0 -total 255 -withname 255 -withcolor 255 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 126 -n1 0 -n2 0 -total 126 -withname 126 -withcolor 126 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { GREEN } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 126 -shape 2004 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 126 -freewire 0 -freeedge 0 -sharededge 874 -max_solid 0 -max_shell 0 -max_face 126 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.956222643 -avg 0.02522398209 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: NBSHAPES : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename Radhaus.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 153 ( 2026 ) Summary = 153 ( 2026 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 532 ( 532 ) Summary = 12701 ( 12702 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 532 ( 532 ) FreeWire = 0 ( 0 ) FreeEdge = 2 ( 2 ) SharedEdge = 5826 ( 5827 )
-TOLERANCE : MaxTol = 0.888818095 ( 0.8888180952 ) AvgTol = 0.02520281804 ( 0.02520274804 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 534 ( 3844 ) N2Labels = 0 ( 0 ) TotalLabels = 535 ( 3845 ) NameLabels = 535 ( 833 ) ColorLabels = 534 ( 3844 ) LayerLabels = 532 ( 3842 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = BLUE1 WHITE ( BLUE1 WHITE )
-NLAYERS : NLayers = 6 ( 6 )
-LAYERS : Layers = 193 198 223 233 243 253 ( 193 198 223 233 243 253 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2069 -max_faults 0
+checkxstat D_First -n0 1 -n1 3844 -n2 0 -total 3845 -withname 833 -withcolor 3844 -withlayer 3842 -centroid 0 -volume 0 -area 0 -colors { BLUE1 WHITE } -nbcolors 2 -layers { 193 198 223 233 243 253 } -nblayers 6
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 532 -shape 12702
+checkstatshape res_1 -solid 0 -shell 0 -face 532 -freewire 0 -freeedge 2 -sharededge 5827
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.8888180952 -avg 0.02520274804]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2069 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 153 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 3844 -n2 0 -total 3845 -withname 833 -withcolor 3844 -withlayer 3842 -centroid 0 -volume 0 -area 0 -nbcolors 2 -nblayers 6
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 534 -n2 0 -total 535 -withname 535 -withcolor 534 -withlayer 532 -centroid 0 -volume 0 -area 0 -colors { BLUE1 WHITE } -nbcolors 2 -layers { 193 198 223 233 243 253 } -nblayers 6
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 532 -shape 12701 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 532 -freewire 0 -freeedge 2 -sharededge 5826 -max_solid 0 -max_shell 0 -max_face 532 -max_freewire 0 -max_freeedge 2
+checkmaxtol res_2 -tol 0.888818095 -avg 0.02520281804 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
set filename 12ls328.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 1 ( 0 ) Summary = 1 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 1521 ( 1521 ) Summary = 20232 ( 20232 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 1521 ( 1521 ) FreeWire = 20 ( 20 ) FreeEdge = 118 ( 118 ) SharedEdge = 8549 ( 8549 )
-TOLERANCE : MaxTol = 0.9994545428 ( 0.9994545568 ) AvgTol = 0.05493298116 ( 0.05493334424 )
-LABELS : N0Labels = 1502 ( 1502 ) N1Labels = 60 ( 78 ) N2Labels = 0 ( 0 ) TotalLabels = 1562 ( 1580 ) NameLabels = 1562 ( 1580 ) ColorLabels = 1561 ( 1579 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = GOLD ( GOLD )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 8 -max_faults 0
+checkxstat D_First -n0 1502 -n1 78 -n2 0 -total 1580 -withname 1580 -withcolor 1579 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { GOLD } -nbcolors 1 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 1521 -shape 20232
+checkstatshape res_1 -solid 0 -shell 0 -face 1521 -freewire 20 -freeedge 118 -sharededge 8549
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.9994545568 -avg 0.05493334424]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 8 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 5 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1502 -n1 78 -n2 0 -total 1580 -withname 1580 -withcolor 1579 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1502 -n1 60 -n2 0 -total 1562 -withname 1562 -withcolor 1561 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { GOLD } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 1521 -shape 20232 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 1521 -freewire 20 -freeedge 118 -sharededge 8549 -max_solid 0 -max_shell 0 -max_face 1521 -max_freewire 20 -max_freeedge 118
+checkmaxtol res_2 -tol 0.9994545428 -avg 0.05493298116 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename Part1.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 0 ( 0 ) Summary = 171 ( 171 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 0 ( 0 ) FreeWire = 0 ( 0 ) FreeEdge = 41 ( 41 ) SharedEdge = 41 ( 41 )
-TOLERANCE : MaxTol = 1e-007 ( 1e-007 ) AvgTol = 1e-007 ( 1e-007 )
-LABELS : N0Labels = 88 ( 88 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 88 ( 88 ) NameLabels = 88 ( 88 ) ColorLabels = 41 ( 88 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = WHITE ( WHITE )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 88 -n1 0 -n2 0 -total 88 -withname 88 -withcolor 88 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 0 -shape 171
+checkstatshape res_1 -solid 0 -shell 0 -face 0 -freewire 0 -freeedge 41 -sharededge 41
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-007 -avg 1e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 88 -n1 0 -n2 0 -total 88 -withname 88 -withcolor 88 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 88 -n1 0 -n2 0 -total 88 -withname 88 -withcolor 41 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 0 -shape 171 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 0 -freewire 0 -freeedge 41 -sharededge 41 -max_solid 0 -max_shell 0 -max_face 0 -max_freewire 0 -max_freeedge 41
+checkmaxtol res_2 -tol 1e-007 -avg 1e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename ardi1.igs
-set ref_data {
-DATA : Faulties = 0 ( 2 ) Warnings = 0 ( 1 ) Summary = 0 ( 3 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 2 ( 6 ) Summary = 2 ( 6 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 4 ( 4 ) Summary = 41 ( 41 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 4 ( 4 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 16 ( 16 )
-TOLERANCE : MaxTol = 1.000100018e-007 ( 1.000100018e-007 ) AvgTol = 1.00002308e-007 ( 1.00002308e-007 )
-LABELS : N0Labels = 4 ( 4 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 4 ( 4 ) NameLabels = 4 ( 4 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 1 -max_faults 2
+checkdoc "tpstat c" -max_warns 6 -max_faults 0
+checkxstat D_First -n0 4 -n1 0 -n2 0 -total 4 -withname 4 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 4 -shape 41
+checkstatshape res_1 -solid 0 -shell 0 -face 4 -freewire 0 -freeedge 0 -sharededge 16
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100018e-007 -avg 1.00002308e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 1 -max_faults 2
+checkdoc "tpstat c" -max_warns 6 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 4 -n1 0 -n2 0 -total 4 -withname 4 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 4 -n1 0 -n2 0 -total 4 -withname 4 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 4 -shape 41 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 4 -freewire 0 -freeedge 0 -sharededge 16 -max_solid 0 -max_shell 0 -max_face 4 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100018e-007 -avg 1.00002308e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename cam1.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 1 ) Summary = 0 ( 1 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 0 ( 0 ) Summary = 419 ( 419 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 0 ( 0 ) FreeWire = 1 ( 1 ) FreeEdge = 137 ( 137 ) SharedEdge = 137 ( 137 )
-TOLERANCE : MaxTol = 1e-007 ( 1e-007 ) AvgTol = 1e-007 ( 1e-007 )
-LABELS : N0Labels = 148 ( 148 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 148 ( 148 ) NameLabels = 148 ( 148 ) ColorLabels = 135 ( 148 ) LayerLabels = 135 ( 148 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 4 ( 4 )
-COLORS : Colors = CYAN1 GREEN MAGENTA1 YELLOW ( CYAN1 GREEN MAGENTA1 YELLOW )
-NLAYERS : NLayers = 3 ( 3 )
-LAYERS : Layers = 1 2 3 ( 1 2 3 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+checkxstat D_First -n0 148 -n1 0 -n2 0 -total 148 -withname 148 -withcolor 148 -withlayer 148 -centroid 0 -volume 0 -area 0 -colors { CYAN1 GREEN MAGENTA1 YELLOW } -nbcolors 4 -layers { 1 2 3 } -nblayers 3
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 0 -shape 419
+checkstatshape res_1 -solid 0 -shell 0 -face 0 -freewire 1 -freeedge 137 -sharededge 137
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-007 -avg 1e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 148 -n1 0 -n2 0 -total 148 -withname 148 -withcolor 148 -withlayer 148 -centroid 0 -volume 0 -area 0 -nbcolors 4 -nblayers 3
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 148 -n1 0 -n2 0 -total 148 -withname 148 -withcolor 135 -withlayer 135 -centroid 0 -volume 0 -area 0 -colors { CYAN1 GREEN MAGENTA1 YELLOW } -nbcolors 4 -layers { 1 2 3 } -nblayers 3
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 0 -shape 419 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 0 -freewire 1 -freeedge 137 -sharededge 137 -max_solid 0 -max_shell 0 -max_face 0 -max_freewire 1 -max_freeedge 137
+checkmaxtol res_2 -tol 1e-007 -avg 1e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename cdc1-fatigue-2.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 876 ( 220 ) Summary = 876 ( 220 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 1 ) Shell = 0 ( 1 ) Face = 471 ( 471 ) Summary = 6964 ( 3122 )
-STATSHAPE : Solid = 0 ( 1 ) Shell = 0 ( 1 ) Face = 471 ( 471 ) FreeWire = 0 ( 0 ) FreeEdge = 6 ( 6 ) SharedEdge = 3004 ( 1323 )
-TOLERANCE : MaxTol = 0.01171066357 ( 0.01550345628 ) AvgTol = 0.0001752022955 ( 0.001202555083 )
-LABELS : N0Labels = 7 ( 7 ) N1Labels = 471 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 478 ( 7 ) NameLabels = 7 ( 7 ) ColorLabels = 477 ( 7 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = BLUE1 DARKOLIVEGREEN1 ( BLUE1 DARKOLIVEGREEN1 )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 220 -max_faults 0
+checkxstat D_First -n0 7 -n1 0 -n2 0 -total 7 -withname 7 -withcolor 7 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 DARKOLIVEGREEN1 } -nbcolors 2 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 471 -shape 3122
+checkstatshape res_1 -solid 1 -shell 1 -face 471 -freewire 0 -freeedge 6 -sharededge 1323
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.01550345628 -avg 0.001202555083]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 220 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 876 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 7 -n1 0 -n2 0 -total 7 -withname 7 -withcolor 7 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 2 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 7 -n1 471 -n2 0 -total 478 -withname 7 -withcolor 477 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 DARKOLIVEGREEN1 } -nbcolors 2 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 471 -shape 6964 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 471 -freewire 0 -freeedge 6 -sharededge 3004 -max_solid 1 -max_shell 1 -max_face 471 -max_freewire 0 -max_freeedge 6
+checkmaxtol res_2 -tol 0.01171066357 -avg 0.0001752022955 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename iges_testa.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 286 ) Summary = 0 ( 286 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 523 ( 523 ) Summary = 5936 ( 5926 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 523 ( 523 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 2485 ( 2485 )
-TOLERANCE : MaxTol = 0.1109937052 ( 0.111004803 ) AvgTol = 0.001890312889 ( 0.001893545105 )
-LABELS : N0Labels = 523 ( 523 ) N1Labels = 0 ( 441 ) N2Labels = 0 ( 0 ) TotalLabels = 523 ( 964 ) NameLabels = 523 ( 641 ) ColorLabels = 523 ( 964 ) LayerLabels = 523 ( 964 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 3 ( 3 )
-COLORS : Colors = BLACK GREEN RED ( BLACK GREEN RED )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 1 ( 1 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 286 -max_faults 0
+checkxstat D_First -n0 523 -n1 441 -n2 0 -total 964 -withname 641 -withcolor 964 -withlayer 964 -centroid 0 -volume 0 -area 0 -colors { BLACK GREEN RED } -nbcolors 3 -layers { 1 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 523 -shape 5926
+checkstatshape res_1 -solid 0 -shell 0 -face 523 -freewire 0 -freeedge 0 -sharededge 2485
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.111004803 -avg 0.001893545105]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 286 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 523 -n1 441 -n2 0 -total 964 -withname 641 -withcolor 964 -withlayer 964 -centroid 0 -volume 0 -area 0 -nbcolors 3 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 523 -n1 0 -n2 0 -total 523 -withname 523 -withcolor 523 -withlayer 523 -centroid 0 -volume 0 -area 0 -colors { BLACK GREEN RED } -nbcolors 3 -layers { 1 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 523 -shape 5936 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 523 -freewire 0 -freeedge 0 -sharededge 2485 -max_solid 0 -max_shell 0 -max_face 523 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.1109937052 -avg 0.001890312889 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename perno.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 1 ( 14 ) Summary = 1 ( 14 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 50 ( 50 ) Summary = 451 ( 450 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 50 ( 50 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 189 ( 189 )
-TOLERANCE : MaxTol = 8.10120345e-006 ( 1e-005 ) AvgTol = 7.842916874e-007 ( 3.006925488e-006 )
-LABELS : N0Labels = 50 ( 50 ) N1Labels = 0 ( 72 ) N2Labels = 0 ( 0 ) TotalLabels = 50 ( 122 ) NameLabels = 50 ( 50 ) ColorLabels = 50 ( 122 ) LayerLabels = 50 ( 122 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = GREEN ( GREEN )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 1 ( 1 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 14 -max_faults 0
+checkxstat D_First -n0 50 -n1 72 -n2 0 -total 122 -withname 50 -withcolor 122 -withlayer 122 -centroid 0 -volume 0 -area 0 -colors { GREEN } -nbcolors 1 -layers { 1 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 50 -shape 450
+checkstatshape res_1 -solid 0 -shell 0 -face 50 -freewire 0 -freeedge 0 -sharededge 189
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-005 -avg 3.006925488e-006]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 14 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 50 -n1 72 -n2 0 -total 122 -withname 50 -withcolor 122 -withlayer 122 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 50 -n1 0 -n2 0 -total 50 -withname 50 -withcolor 50 -withlayer 50 -centroid 0 -volume 0 -area 0 -colors { GREEN } -nbcolors 1 -layers { 1 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 50 -shape 451 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 50 -freewire 0 -freeedge 0 -sharededge 189 -max_solid 0 -max_shell 0 -max_face 50 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 8.10120345e-006 -avg 7.842916874e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: NBSHAPES : Faulty"
puts "TODO CR23096 ALL: TOLERANCE : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename poteau.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 15 ( 424 ) Summary = 15 ( 424 )
-CHECKSHAPE : Wires = 0 ( 1 ) Faces = 0 ( 1 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 240 ( 240 ) Summary = 7603 ( 7607 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 240 ( 240 ) FreeWire = 135 ( 139 ) FreeEdge = 1262 ( 1262 ) SharedEdge = 3013 ( 3013 )
-TOLERANCE : MaxTol = 0.03614106862 ( 0.03613204275 ) AvgTol = 0.0001652304146 ( 0.0001664949467 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 969 ( 2680 ) N2Labels = 0 ( 0 ) TotalLabels = 970 ( 2681 ) NameLabels = 970 ( 1302 ) ColorLabels = 969 ( 2680 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = WHITE ( WHITE )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 432 -max_faults 0
+checkxstat D_First -n0 1 -n1 2680 -n2 0 -total 2681 -withname 1302 -withcolor 2680 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 1 -max_faces 1 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 240 -shape 7607
+checkstatshape res_1 -solid 0 -shell 0 -face 240 -freewire 139 -freeedge 1262 -sharededge 3013
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.03613204275 -avg 0.0001664949467]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 432 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 12 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 2680 -n2 0 -total 2681 -withname 1302 -withcolor 2680 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 969 -n2 0 -total 970 -withname 970 -withcolor 969 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 1 -max_faces 1 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 240 -shape 7603 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 240 -freewire 135 -freeedge 1262 -sharededge 3013 -max_solid 0 -max_shell 0 -max_face 240 -max_freewire 139 -max_freeedge 1262
+checkmaxtol res_2 -tol 0.03614106862 -avg 0.0001652304146 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename scenrio1.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 5 ( 25 ) Summary = 5 ( 25 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 30 ( 30 ) Summary = 693 ( 693 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 30 ( 30 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 316 ( 316 )
-TOLERANCE : MaxTol = 0.01590471793 ( 0.01590471327 ) AvgTol = 0.0001153880329 ( 0.0001201847625 )
-LABELS : N0Labels = 30 ( 30 ) N1Labels = 0 ( 12 ) N2Labels = 0 ( 0 ) TotalLabels = 30 ( 42 ) NameLabels = 30 ( 32 ) ColorLabels = 30 ( 42 ) LayerLabels = 30 ( 42 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = GREEN RED ( GREEN RED )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 21 ( 21 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 25 -max_faults 0
+checkxstat D_First -n0 30 -n1 12 -n2 0 -total 42 -withname 32 -withcolor 42 -withlayer 42 -centroid 0 -volume 0 -area 0 -colors { GREEN RED } -nbcolors 2 -layers { 21 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 30 -shape 693
+checkstatshape res_1 -solid 0 -shell 0 -face 30 -freewire 0 -freeedge 0 -sharededge 316
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.01590471327 -avg 0.0001201847625]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 25 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 5 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 30 -n1 12 -n2 0 -total 42 -withname 32 -withcolor 42 -withlayer 42 -centroid 0 -volume 0 -area 0 -nbcolors 2 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 30 -n1 0 -n2 0 -total 30 -withname 30 -withcolor 30 -withlayer 30 -centroid 0 -volume 0 -area 0 -colors { GREEN RED } -nbcolors 2 -layers { 21 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 30 -shape 693 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 30 -freewire 0 -freeedge 0 -sharededge 316 -max_solid 0 -max_shell 0 -max_face 30 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.01590471793 -avg 0.0001153880329 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename support_bobine.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 2 ( 34 ) Summary = 2 ( 34 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 123 ( 123 ) Summary = 3349 ( 3349 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 123 ( 123 ) FreeWire = 7 ( 7 ) FreeEdge = 571 ( 571 ) SharedEdge = 1263 ( 1263 )
-TOLERANCE : MaxTol = 0.01306151266 ( 0.01306151266 ) AvgTol = 4.724224752e-005 ( 4.790122037e-005 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 675 ( 1360 ) N2Labels = 0 ( 0 ) TotalLabels = 676 ( 1361 ) NameLabels = 676 ( 745 ) ColorLabels = 675 ( 1360 ) LayerLabels = 584 ( 1185 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = WHITE YELLOW ( WHITE YELLOW )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 200 ( 200 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 36 -max_faults 0
+checkxstat D_First -n0 1 -n1 1360 -n2 0 -total 1361 -withname 745 -withcolor 1360 -withlayer 1185 -centroid 0 -volume 0 -area 0 -colors { WHITE YELLOW } -nbcolors 2 -layers { 200 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 123 -shape 3349
+checkstatshape res_1 -solid 0 -shell 0 -face 123 -freewire 7 -freeedge 571 -sharededge 1263
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.01306151266 -avg 4.790122037e-005]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 36 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 1360 -n2 0 -total 1361 -withname 745 -withcolor 1360 -withlayer 1185 -centroid 0 -volume 0 -area 0 -nbcolors 2 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 675 -n2 0 -total 676 -withname 676 -withcolor 675 -withlayer 584 -centroid 0 -volume 0 -area 0 -colors { WHITE YELLOW } -nbcolors 2 -layers { 200 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 123 -shape 3349 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 123 -freewire 7 -freeedge 571 -sharededge 1263 -max_solid 0 -max_shell 0 -max_face 123 -max_freewire 7 -max_freeedge 571
+checkmaxtol res_2 -tol 0.01306151266 -avg 4.724224752e-005 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename SurfW.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 1006 ) Summary = 0 ( 1006 )
-CHECKSHAPE : Wires = 2 ( 2 ) Faces = 2 ( 2 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 97 ( 97 ) Summary = 26757 ( 26757 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 97 ( 97 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 13280 ( 13280 )
-TOLERANCE : MaxTol = 0.0124350083 ( 0.0124350083 ) AvgTol = 0.0003833463156 ( 0.0003833463156 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 97 ( 188 ) N2Labels = 0 ( 0 ) TotalLabels = 98 ( 189 ) NameLabels = 98 ( 189 ) ColorLabels = 97 ( 188 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = BLACK ( BLACK )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1006 -max_faults 0
+checkxstat D_First -n0 1 -n1 188 -n2 0 -total 189 -withname 189 -withcolor 188 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLACK } -nbcolors 1 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 2 -max_faces 2 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 97 -shape 26757
+checkstatshape res_1 -solid 0 -shell 0 -face 97 -freewire 0 -freeedge 0 -sharededge 13280
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.0124350083 -avg 0.0003833463156]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1006 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 188 -n2 0 -total 189 -withname 189 -withcolor 188 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 97 -n2 0 -total 98 -withname 98 -withcolor 97 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLACK } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 2 -max_faces 2 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 2 -max_faces 2 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 97 -shape 26757 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 97 -freewire 0 -freeedge 0 -sharededge 13280 -max_solid 0 -max_shell 0 -max_face 97 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.0124350083 -avg 0.0003833463156 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
-set LinuxDiff 2
set filename SurfW_fix.igs
-set ref_data {
-DATA : Faulties = 0 ( 1 ) Warnings = 0 ( 0 ) Summary = 0 ( 1 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 3 ( 183 ) Summary = 3 ( 183 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 97 ( 97 ) Summary = 2685 ( 2684 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 97 ( 97 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 1243 ( 1243 )
-TOLERANCE : MaxTol = 0.009955692634 ( 0.009955692464 ) AvgTol = 0.0008509893784 ( 0.0008531522552 )
-LABELS : N0Labels = 97 ( 97 ) N1Labels = 0 ( 91 ) N2Labels = 0 ( 0 ) TotalLabels = 97 ( 188 ) NameLabels = 97 ( 97 ) ColorLabels = 97 ( 188 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = BLACK ( BLACK )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 1
+checkdoc "tpstat c" -max_warns 183 -max_faults 0
+checkxstat D_First -n0 97 -n1 91 -n2 0 -total 188 -withname 97 -withcolor 188 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLACK } -nbcolors 1 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 97 -shape 2684
+checkstatshape res_1 -solid 0 -shell 0 -face 97 -freewire 0 -freeedge 0 -sharededge 1243
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.009955692464 -avg 0.0008531522552]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 1
+checkdoc "tpstat c" -max_warns 183 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 97 -n1 91 -n2 0 -total 188 -withname 97 -withcolor 188 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 97 -n1 0 -n2 0 -total 97 -withname 97 -withcolor 97 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLACK } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 97 -shape 2685 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 97 -freewire 0 -freeedge 0 -sharededge 1243 -max_solid 0 -max_shell 0 -max_face 97 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.009955692634 -avg 0.0008509893784 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename TibTray_Size3.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 1 ) Summary = 0 ( 1 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 166 ( 312 ) Summary = 166 ( 312 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 212 ( 212 ) Summary = 2920 ( 2920 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 212 ( 212 ) FreeWire = 6 ( 6 ) FreeEdge = 43 ( 43 ) SharedEdge = 1243 ( 1243 )
-TOLERANCE : MaxTol = 0.9221308818 ( 0.9221308818 ) AvgTol = 0.01482069174 ( 0.01482190688 )
-LABELS : N0Labels = 244 ( 244 ) N1Labels = 0 ( 216 ) N2Labels = 0 ( 0 ) TotalLabels = 244 ( 460 ) NameLabels = 244 ( 460 ) ColorLabels = 238 ( 460 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 6 ( 6 )
-COLORS : Colors = DEEPSKYBLUE2 MAGENTA1 ORANGE ORANGERED RED YELLOW ( DEEPSKYBLUE2 MAGENTA1 ORANGE ORANGERED RED YELLOW )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 315 -max_faults 0
+checkxstat D_First -n0 244 -n1 216 -n2 0 -total 460 -withname 460 -withcolor 460 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { DEEPSKYBLUE2 MAGENTA1 ORANGE ORANGERED RED YELLOW } -nbcolors 6 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 212 -shape 2920
+checkstatshape res_1 -solid 0 -shell 0 -face 212 -freewire 6 -freeedge 43 -sharededge 1243
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.9221308818 -avg 0.01482190688]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 315 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 168 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 244 -n1 216 -n2 0 -total 460 -withname 460 -withcolor 460 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 6 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 244 -n1 0 -n2 0 -total 244 -withname 244 -withcolor 238 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { DEEPSKYBLUE2 MAGENTA1 ORANGE ORANGERED RED YELLOW } -nbcolors 6 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 212 -shape 2920 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 212 -freewire 6 -freeedge 43 -sharededge 1243 -max_solid 0 -max_shell 0 -max_face 212 -max_freewire 6 -max_freeedge 43
+checkmaxtol res_2 -tol 0.9221308818 -avg 0.01482069174 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename UK3.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 1 ) Summary = 0 ( 1 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 12 ( 485 ) Summary = 12 ( 485 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 239 ( 239 ) Summary = 4786 ( 4768 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 239 ( 239 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 2151 ( 2144 )
-TOLERANCE : MaxTol = 0.0009886042946 ( 0.0009885051926 ) AvgTol = 5.777641061e-005 ( 5.821884006e-005 )
-LABELS : N0Labels = 237 ( 237 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 237 ( 237 ) NameLabels = 237 ( 237 ) ColorLabels = 0 ( 0 ) LayerLabels = 236 ( 237 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 1 ( 1 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 485 -max_faults 0
+checkxstat D_First -n0 237 -n1 0 -n2 0 -total 237 -withname 237 -withcolor 0 -withlayer 237 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { 1 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 239 -shape 4768
+checkstatshape res_1 -solid 0 -shell 0 -face 239 -freewire 0 -freeedge 0 -sharededge 2144
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.0009885051926 -avg 5.821884006e-005]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 485 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 21 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 237 -n1 0 -n2 0 -total 237 -withname 237 -withcolor 0 -withlayer 237 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 237 -n1 0 -n2 0 -total 237 -withname 237 -withcolor 0 -withlayer 236 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { 1 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 239 -shape 4786 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 239 -freewire 0 -freeedge 0 -sharededge 2151 -max_solid 0 -max_shell 0 -max_face 239 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.0009886042946 -avg 5.777641061e-005 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
-set LinuxDiff 1
set filename UKI60106.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 72 ( 612 ) Summary = 72 ( 612 )
-CHECKSHAPE : Wires = 1 ( 3 ) Faces = 1 ( 2 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 457 ( 457 ) Summary = 10469 ( 10468 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 457 ( 457 ) FreeWire = 26 ( 26 ) FreeEdge = 1283 ( 1283 ) SharedEdge = 4129 ( 4128 )
-TOLERANCE : MaxTol = 0.9874160851 ( 0.98741607 ) AvgTol = 0.01671715735 ( 0.01690643311 )
-LABELS : N0Labels = 1706 ( 1706 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1706 ( 1706 ) NameLabels = 1706 ( 1706 ) ColorLabels = 1680 ( 1706 ) LayerLabels = 1680 ( 1706 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 4 ( 4 )
-COLORS : Colors = DARKORANGE DARKVIOLET GRAY57 ORCHID1 ( DARKORANGE DARKVIOLET GRAY57 ORCHID1 )
-NLAYERS : NLayers = 3 ( 3 )
-LAYERS : Layers = 1 24 25 ( 1 24 25 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 612 -max_faults 0
+checkxstat D_First -n0 1706 -n1 0 -n2 0 -total 1706 -withname 1706 -withcolor 1706 -withlayer 1706 -centroid 0 -volume 0 -area 0 -colors { DARKORANGE DARKVIOLET GRAY57 ORCHID1 } -nbcolors 4 -layers { 1 24 25 } -nblayers 3
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 3 -max_faces 2 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 457 -shape 10468
+checkstatshape res_1 -solid 0 -shell 0 -face 457 -freewire 26 -freeedge 1283 -sharededge 4128
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.98741607 -avg 0.01690643311]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 612 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 72 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1706 -n1 0 -n2 0 -total 1706 -withname 1706 -withcolor 1706 -withlayer 1706 -centroid 0 -volume 0 -area 0 -nbcolors 4 -nblayers 3
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1706 -n1 0 -n2 0 -total 1706 -withname 1706 -withcolor 1680 -withlayer 1680 -centroid 0 -volume 0 -area 0 -colors { DARKORANGE DARKVIOLET GRAY57 ORCHID1 } -nbcolors 4 -layers { 1 24 25 } -nblayers 3
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 3 -max_faces 2 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 1 -max_faces 1 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 457 -shape 10469 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 457 -freewire 26 -freeedge 1283 -sharededge 4129 -max_solid 0 -max_shell 0 -max_face 457 -max_freewire 26 -max_freeedge 1283
+checkmaxtol res_2 -tol 0.9874160851 -avg 0.01671715735 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: NBSHAPES : Faulty"
puts "TODO CR23096 ALL: STATSHAPE : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename UKI60556.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 1 ) Summary = 0 ( 1 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 444 ( 1005 ) Summary = 444 ( 1005 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 300 ( 300 ) Summary = 50219 ( 50230 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 300 ( 300 ) FreeWire = 119 ( 139 ) FreeEdge = 4488 ( 4487 ) SharedEdge = 24679 ( 24678 )
-TOLERANCE : MaxTol = 1e-05 ( 0.06099237775 ) AvgTol = 3.184880431e-07 ( 1.621424764e-05 )
-LABELS : N0Labels = 432 ( 432 ) N1Labels = 12 ( 845 ) N2Labels = 0 ( 0 ) TotalLabels = 444 ( 1277 ) NameLabels = 432 ( 687 ) ColorLabels = 320 ( 1277 ) LayerLabels = 320 ( 1277 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 6 ( 6 )
-COLORS : Colors = CYAN1 GREEN MAGENTA1 RED WHITE YELLOW ( CYAN1 GREEN MAGENTA1 RED WHITE YELLOW )
-NLAYERS : NLayers = 4 ( 4 )
-LAYERS : Layers = 1 2 3 4 ( 1 2 3 4 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 1005 -max_faults 0
+checkxstat D_First -n0 432 -n1 845 -n2 0 -total 1277 -withname 687 -withcolor 1277 -withlayer 1277 -centroid 0 -volume 0 -area 0 -colors { CYAN1 GREEN MAGENTA1 RED WHITE YELLOW } -nbcolors 6 -layers { 1 2 3 4 } -nblayers 4
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 300 -shape 50230
+checkstatshape res_1 -solid 0 -shell 0 -face 300 -freewire 139 -freeedge 4487 -sharededge 24678
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.06099237775 -avg 1.621424764e-05]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 1005 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 448 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 432 -n1 845 -n2 0 -total 1277 -withname 687 -withcolor 1277 -withlayer 1277 -centroid 0 -volume 0 -area 0 -nbcolors 6 -nblayers 4
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 432 -n1 12 -n2 0 -total 444 -withname 432 -withcolor 320 -withlayer 320 -centroid 0 -volume 0 -area 0 -colors { CYAN1 GREEN MAGENTA1 RED WHITE YELLOW } -nbcolors 6 -layers { 1 2 3 4 } -nblayers 4
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 300 -shape 50219 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 300 -freewire 119 -freeedge 4488 -sharededge 24679 -max_solid 0 -max_shell 0 -max_face 300 -max_freewire 139 -max_freeedge 4487
+checkmaxtol res_2 -tol 1e-05 -avg 3.184880431e-07 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
-puts "TODO CR25013 ALL: Error : 2 differences with reference data found"
+puts "TODO CR25013 ALL: Error : is WRONG because number of SHAPE entities in shape"
+puts "TODO CR25013 ALL: STATSHAPE : Faulty ref number of shared edges in command statshape"
set filename lh93wsddr3370z2.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 246 ( 6306 ) Summary = 246 ( 6306 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 685 ( 685 ) Summary = 10601 ( 10601 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 685 ( 685 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 4635 ( 4635 )
-TOLERANCE : MaxTol = 0.03464832644 ( 0.08716146716 ) AvgTol = 0.0001792027306 ( 0.0002025375566 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 6395 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 685 -shape 10601
+checkstatshape res_1 -solid 0 -shell 0 -face 685 -freewire 0 -freeedge 0 -sharededge 4635
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.08716146716 -avg 0.0002025375566]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 6395 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 252 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 685 -shape 10601 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 685 -freewire 0 -freeedge 0 -sharededge 4635 -max_solid 0 -max_shell 0 -max_face 685 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.03464832644 -avg 0.0001792027306 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename USA60023-2.igs
-set ref_data {
-DATA : Faulties = 0 ( 1 ) Warnings = 0 ( 0 ) Summary = 0 ( 1 )
-TPSTAT : Faulties = 0 ( 1 ) Warnings = 0 ( 16 ) Summary = 0 ( 17 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 0 ( 0 ) Summary = 14893 ( 15168 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 0 ( 0 ) FreeWire = 16 ( 16 ) FreeEdge = 5288 ( 5288 ) SharedEdge = 5288 ( 5288 )
-TOLERANCE : MaxTol = 1e-07 ( 1e-07 ) AvgTol = 1e-07 ( 1e-07 )
-LABELS : N0Labels = 4160 ( 4160 ) N1Labels = 286 ( 562 ) N2Labels = 0 ( 0 ) TotalLabels = 4446 ( 4722 ) NameLabels = 4160 ( 4160 ) ColorLabels = 3040 ( 3061 ) LayerLabels = 4382 ( 4402 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 6 ( 6 )
-COLORS : Colors = BLUE1 CYAN1 GREEN MAGENTA1 RED YELLOW ( BLUE1 CYAN1 GREEN MAGENTA1 RED YELLOW )
-NLAYERS : NLayers = 36 ( 36 )
-LAYERS : Layers = 1 10 104 106 107 11 12 14 17 2 20 200 21 22 24 3 30 31 4 41 44 5 50 52 60 61 62 64 7 70 71 72 80 81 82 9 ( 1 10 104 106 107 11 12 14 17 2 20 200 21 22 24 3 30 31 4 41 44 5 50 52 60 61 62 64 7 70 71 72 80 81 82 9 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 1
+checkdoc "tpstat c" -max_warns 16 -max_faults 1
+checkxstat D_First -n0 4160 -n1 562 -n2 0 -total 4722 -withname 4160 -withcolor 3061 -withlayer 4402 -centroid 0 -volume 0 -area 0 -colors { BLUE1 CYAN1 GREEN MAGENTA1 RED YELLOW } -nbcolors 6 -layers { 1 10 104 106 107 11 12 14 17 2 20 200 21 22 24 3 30 31 4 41 44 5 50 52 60 61 62 64 7 70 71 72 80 81 82 9 } -nblayers 36
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 0 -shape 15168
+checkstatshape res_1 -solid 0 -shell 0 -face 0 -freewire 16 -freeedge 5288 -sharededge 5288
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-07 -avg 1e-07]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 1
+checkdoc "tpstat c" -max_warns 16 -max_faults 1
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 4160 -n1 562 -n2 0 -total 4722 -withname 4160 -withcolor 3061 -withlayer 4402 -centroid 0 -volume 0 -area 0 -nbcolors 6 -nblayers 36
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 4160 -n1 286 -n2 0 -total 4446 -withname 4160 -withcolor 3040 -withlayer 4382 -centroid 0 -volume 0 -area 0 -colors { BLUE1 CYAN1 GREEN MAGENTA1 RED YELLOW } -nbcolors 6 -layers { 1 10 104 106 107 11 12 14 17 2 20 200 21 22 24 3 30 31 4 41 44 5 50 52 60 61 62 64 7 70 71 72 80 81 82 9 } -nblayers 36
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 0 -shape 14893 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 0 -freewire 16 -freeedge 5288 -sharededge 5288 -max_solid 0 -max_shell 0 -max_face 0 -max_freewire 16 -max_freeedge 5288
+checkmaxtol res_2 -tol 1e-07 -avg 1e-07 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename USA60023-3.igs
-set ref_data {
-DATA : Faulties = 0 ( 2 ) Warnings = 0 ( 0 ) Summary = 0 ( 2 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 68 ) Summary = 0 ( 68 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 0 ( 0 ) Summary = 12439 ( 12441 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 0 ( 0 ) FreeWire = 68 ( 68 ) FreeEdge = 4391 ( 4391 ) SharedEdge = 4391 ( 4391 )
-TOLERANCE : MaxTol = 1e-07 ( 1e-07 ) AvgTol = 1e-07 ( 1e-07 )
-LABELS : N0Labels = 3170 ( 3170 ) N1Labels = 524 ( 526 ) N2Labels = 0 ( 0 ) TotalLabels = 3694 ( 3696 ) NameLabels = 3170 ( 3170 ) ColorLabels = 2514 ( 2564 ) LayerLabels = 3596 ( 3662 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 6 ( 6 )
-COLORS : Colors = BLUE1 CYAN1 GREEN MAGENTA1 RED YELLOW ( BLUE1 CYAN1 GREEN MAGENTA1 RED YELLOW )
-NLAYERS : NLayers = 31 ( 31 )
-LAYERS : Layers = 1 10 100 106 107 11 12 14 17 19 2 20 21 22 24 3 30 31 32 4 5 50 6 60 7 70 72 74 80 81 82 ( 1 10 100 106 107 11 12 14 17 19 2 20 21 22 24 3 30 31 32 4 5 50 6 60 7 70 72 74 80 81 82 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 2
+checkdoc "tpstat c" -max_warns 68 -max_faults 0
+checkxstat D_First -n0 3170 -n1 526 -n2 0 -total 3696 -withname 3170 -withcolor 2564 -withlayer 3662 -centroid 0 -volume 0 -area 0 -colors { BLUE1 CYAN1 GREEN MAGENTA1 RED YELLOW } -nbcolors 6 -layers { 1 10 100 106 107 11 12 14 17 19 2 20 21 22 24 3 30 31 32 4 5 50 6 60 7 70 72 74 80 81 82 } -nblayers 31
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 0 -shape 12441
+checkstatshape res_1 -solid 0 -shell 0 -face 0 -freewire 68 -freeedge 4391 -sharededge 4391
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-07 -avg 1e-07]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 2
+checkdoc "tpstat c" -max_warns 68 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3170 -n1 526 -n2 0 -total 3696 -withname 3170 -withcolor 2564 -withlayer 3662 -centroid 0 -volume 0 -area 0 -nbcolors 6 -nblayers 31
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3170 -n1 524 -n2 0 -total 3694 -withname 3170 -withcolor 2514 -withlayer 3596 -centroid 0 -volume 0 -area 0 -colors { BLUE1 CYAN1 GREEN MAGENTA1 RED YELLOW } -nbcolors 6 -layers { 1 10 100 106 107 11 12 14 17 19 2 20 21 22 24 3 30 31 32 4 5 50 6 60 7 70 72 74 80 81 82 } -nblayers 31
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 0 -shape 12439 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 0 -freewire 68 -freeedge 4391 -sharededge 4391 -max_solid 0 -max_shell 0 -max_face 0 -max_freewire 68 -max_freeedge 4391
+checkmaxtol res_2 -tol 1e-07 -avg 1e-07 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename USA60023-4.igs
-set ref_data {
-DATA : Faulties = 0 ( 2 ) Warnings = 0 ( 0 ) Summary = 0 ( 2 )
-TPSTAT : Faulties = 0 ( 39 ) Warnings = 0 ( 12 ) Summary = 0 ( 51 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 0 ( 0 ) Summary = 14914 ( 15469 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 0 ( 0 ) FreeWire = 9 ( 9 ) FreeEdge = 5039 ( 5039 ) SharedEdge = 5039 ( 5039 )
-TOLERANCE : MaxTol = 1e-07 ( 1e-07 ) AvgTol = 1e-07 ( 1e-07 )
-LABELS : N0Labels = 4555 ( 4555 ) N1Labels = 328 ( 884 ) N2Labels = 0 ( 0 ) TotalLabels = 4883 ( 5439 ) NameLabels = 4555 ( 4555 ) ColorLabels = 3752 ( 4340 ) LayerLabels = 4851 ( 4868 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 6 ( 6 )
-COLORS : Colors = BLUE1 CYAN1 GREEN MAGENTA1 RED YELLOW ( BLUE1 CYAN1 GREEN MAGENTA1 RED YELLOW )
-NLAYERS : NLayers = 38 ( 38 )
-LAYERS : Layers = 1 10 100 102 106 107 11 12 14 15 2 20 21 22 24 25 3 30 31 32 34 4 40 41 5 50 51 52 6 60 61 62 7 70 71 80 81 82 ( 1 10 100 102 106 107 11 12 14 15 2 20 21 22 24 25 3 30 31 32 34 4 40 41 5 50 51 52 6 60 61 62 7 70 71 80 81 82 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 2
+checkdoc "tpstat c" -max_warns 12 -max_faults 39
+checkxstat D_First -n0 4555 -n1 884 -n2 0 -total 5439 -withname 4555 -withcolor 4340 -withlayer 4868 -centroid 0 -volume 0 -area 0 -colors { BLUE1 CYAN1 GREEN MAGENTA1 RED YELLOW } -nbcolors 6 -layers { 1 10 100 102 106 107 11 12 14 15 2 20 21 22 24 25 3 30 31 32 34 4 40 41 5 50 51 52 6 60 61 62 7 70 71 80 81 82 } -nblayers 38
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 0 -shape 15469
+checkstatshape res_1 -solid 0 -shell 0 -face 0 -freewire 9 -freeedge 5039 -sharededge 5039
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-07 -avg 1e-07]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 2
+checkdoc "tpstat c" -max_warns 12 -max_faults 39
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 4555 -n1 884 -n2 0 -total 5439 -withname 4555 -withcolor 4340 -withlayer 4868 -centroid 0 -volume 0 -area 0 -nbcolors 6 -nblayers 38
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 4555 -n1 328 -n2 0 -total 4883 -withname 4555 -withcolor 3752 -withlayer 4851 -centroid 0 -volume 0 -area 0 -colors { BLUE1 CYAN1 GREEN MAGENTA1 RED YELLOW } -nbcolors 6 -layers { 1 10 100 102 106 107 11 12 14 15 2 20 21 22 24 25 3 30 31 32 34 4 40 41 5 50 51 52 6 60 61 62 7 70 71 80 81 82 } -nblayers 38
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 0 -shape 14914 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 0 -freewire 9 -freeedge 5039 -sharededge 5039 -max_solid 0 -max_shell 0 -max_face 0 -max_freewire 9 -max_freeedge 5039
+checkmaxtol res_2 -tol 1e-07 -avg 1e-07 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename USA60023-5.igs
-set ref_data {
-DATA : Faulties = 0 ( 2 ) Warnings = 0 ( 0 ) Summary = 0 ( 2 )
-TPSTAT : Faulties = 0 ( 34 ) Warnings = 0 ( 14 ) Summary = 0 ( 48 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 0 ( 0 ) Summary = 10899 ( 10899 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 0 ( 0 ) FreeWire = 13 ( 13 ) FreeEdge = 3713 ( 3713 ) SharedEdge = 3713 ( 3713 )
-TOLERANCE : MaxTol = 1e-07 ( 1e-07 ) AvgTol = 1e-07 ( 1e-07 )
-LABELS : N0Labels = 3397 ( 3397 ) N1Labels = 134 ( 134 ) N2Labels = 0 ( 0 ) TotalLabels = 3531 ( 3531 ) NameLabels = 3397 ( 3397 ) ColorLabels = 2538 ( 2578 ) LayerLabels = 3467 ( 3500 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 6 ( 6 )
-COLORS : Colors = BLUE1 CYAN1 GREEN MAGENTA1 RED YELLOW ( BLUE1 CYAN1 GREEN MAGENTA1 RED YELLOW )
-NLAYERS : NLayers = 29 ( 29 )
-LAYERS : Layers = 1 10 100 102 104 106 107 11 12 14 2 20 21 22 24 3 30 31 32 4 40 5 50 52 7 70 71 74 80 ( 1 10 100 102 104 106 107 11 12 14 2 20 21 22 24 3 30 31 32 4 40 5 50 52 7 70 71 74 80 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 2
+checkdoc "tpstat c" -max_warns 14 -max_faults 34
+checkxstat D_First -n0 3397 -n1 134 -n2 0 -total 3531 -withname 3397 -withcolor 2578 -withlayer 3500 -centroid 0 -volume 0 -area 0 -colors { BLUE1 CYAN1 GREEN MAGENTA1 RED YELLOW } -nbcolors 6 -layers { 1 10 100 102 104 106 107 11 12 14 2 20 21 22 24 3 30 31 32 4 40 5 50 52 7 70 71 74 80 } -nblayers 29
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 0 -shape 10899
+checkstatshape res_1 -solid 0 -shell 0 -face 0 -freewire 13 -freeedge 3713 -sharededge 3713
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-07 -avg 1e-07]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 2
+checkdoc "tpstat c" -max_warns 14 -max_faults 34
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3397 -n1 134 -n2 0 -total 3531 -withname 3397 -withcolor 2578 -withlayer 3500 -centroid 0 -volume 0 -area 0 -nbcolors 6 -nblayers 29
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3397 -n1 134 -n2 0 -total 3531 -withname 3397 -withcolor 2538 -withlayer 3467 -centroid 0 -volume 0 -area 0 -colors { BLUE1 CYAN1 GREEN MAGENTA1 RED YELLOW } -nbcolors 6 -layers { 1 10 100 102 104 106 107 11 12 14 2 20 21 22 24 3 30 31 32 4 40 5 50 52 7 70 71 74 80 } -nblayers 29
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 0 -shape 10899 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 0 -freewire 13 -freeedge 3713 -sharededge 3713 -max_solid 0 -max_shell 0 -max_face 0 -max_freewire 13 -max_freeedge 3713
+checkmaxtol res_2 -tol 1e-07 -avg 1e-07 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename USA60023-6.igs
-set ref_data {
-DATA : Faulties = 0 ( 1 ) Warnings = 0 ( 0 ) Summary = 0 ( 1 )
-TPSTAT : Faulties = 0 ( 44 ) Warnings = 0 ( 24 ) Summary = 0 ( 68 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 0 ( 0 ) Summary = 9878 ( 9879 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 0 ( 0 ) FreeWire = 17 ( 17 ) FreeEdge = 3356 ( 3356 ) SharedEdge = 3356 ( 3356 )
-TOLERANCE : MaxTol = 1e-07 ( 1e-07 ) AvgTol = 1e-07 ( 1e-07 )
-LABELS : N0Labels = 2998 ( 2998 ) N1Labels = 195 ( 202 ) N2Labels = 0 ( 0 ) TotalLabels = 3193 ( 3200 ) NameLabels = 2998 ( 2998 ) ColorLabels = 2187 ( 2225 ) LayerLabels = 3162 ( 3184 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 6 ( 6 )
-COLORS : Colors = BLUE1 CYAN1 GREEN MAGENTA1 RED YELLOW ( BLUE1 CYAN1 GREEN MAGENTA1 RED YELLOW )
-NLAYERS : NLayers = 34 ( 34 )
-LAYERS : Layers = 1 10 100 106 107 11 12 14 2 20 21 22 24 25 250 3 30 31 4 40 42 5 50 51 52 54 6 60 62 7 70 71 80 81 ( 1 10 100 106 107 11 12 14 2 20 21 22 24 25 250 3 30 31 4 40 42 5 50 51 52 54 6 60 62 7 70 71 80 81 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 1
+checkdoc "tpstat c" -max_warns 24 -max_faults 44
+checkxstat D_First -n0 2998 -n1 202 -n2 0 -total 3200 -withname 2998 -withcolor 2225 -withlayer 3184 -centroid 0 -volume 0 -area 0 -colors { BLUE1 CYAN1 GREEN MAGENTA1 RED YELLOW } -nbcolors 6 -layers { 1 10 100 106 107 11 12 14 2 20 21 22 24 25 250 3 30 31 4 40 42 5 50 51 52 54 6 60 62 7 70 71 80 81 } -nblayers 34
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 0 -shape 9879
+checkstatshape res_1 -solid 0 -shell 0 -face 0 -freewire 17 -freeedge 3356 -sharededge 3356
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-07 -avg 1e-07]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 1
+checkdoc "tpstat c" -max_warns 24 -max_faults 44
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 2998 -n1 202 -n2 0 -total 3200 -withname 2998 -withcolor 2225 -withlayer 3184 -centroid 0 -volume 0 -area 0 -nbcolors 6 -nblayers 34
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 2998 -n1 195 -n2 0 -total 3193 -withname 2998 -withcolor 2187 -withlayer 3162 -centroid 0 -volume 0 -area 0 -colors { BLUE1 CYAN1 GREEN MAGENTA1 RED YELLOW } -nbcolors 6 -layers { 1 10 100 106 107 11 12 14 2 20 21 22 24 25 250 3 30 31 4 40 42 5 50 51 52 54 6 60 62 7 70 71 80 81 } -nblayers 34
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 0 -shape 9878 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 0 -freewire 17 -freeedge 3356 -sharededge 3356 -max_solid 0 -max_shell 0 -max_face 0 -max_freewire 17 -max_freeedge 3356
+checkmaxtol res_2 -tol 1e-07 -avg 1e-07 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
puts "TODO CR23096 ALL: NBSHAPES : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename USA60293.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 86 ( 56 ) Summary = 86 ( 56 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 793 ( 793 ) Summary = 9249 ( 9251 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 793 ( 793 ) FreeWire = 0 ( 0 ) FreeEdge = 8 ( 8 ) SharedEdge = 3847 ( 3848 )
-TOLERANCE : MaxTol = 0.9292857408 ( 0.9292857413 ) AvgTol = 0.05474076147 ( 0.05472794112 )
-LABELS : N0Labels = 800 ( 800 ) N1Labels = 2 ( 1047 ) N2Labels = 0 ( 0 ) TotalLabels = 802 ( 1847 ) NameLabels = 800 ( 800 ) ColorLabels = 801 ( 1847 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 9 ( 9 )
-COLORS : Colors = BLUE1 BURLYWOOD2 CYAN1 GREEN LIGHTSTEELBLUE ORCHID2 RED SEAGREEN2 YELLOW ( BLUE1 BURLYWOOD2 CYAN1 GREEN LIGHTSTEELBLUE ORCHID2 RED SEAGREEN2 YELLOW )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 56 -max_faults 0
+checkxstat D_First -n0 800 -n1 1047 -n2 0 -total 1847 -withname 800 -withcolor 1847 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 BURLYWOOD2 CYAN1 GREEN LIGHTSTEELBLUE ORCHID2 RED SEAGREEN2 YELLOW } -nbcolors 9 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 793 -shape 9251
+checkstatshape res_1 -solid 0 -shell 0 -face 793 -freewire 0 -freeedge 8 -sharededge 3848
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.9292857413 -avg 0.05472794112]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 56 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 92 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 800 -n1 1047 -n2 0 -total 1847 -withname 800 -withcolor 1847 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 9 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 800 -n1 2 -n2 0 -total 802 -withname 800 -withcolor 801 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 BURLYWOOD2 CYAN1 GREEN LIGHTSTEELBLUE ORCHID2 RED SEAGREEN2 YELLOW } -nbcolors 9 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 793 -shape 9249 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 793 -freewire 0 -freeedge 8 -sharededge 3847 -max_solid 0 -max_shell 0 -max_face 793 -max_freewire 0 -max_freeedge 8
+checkmaxtol res_2 -tol 0.9292857408 -avg 0.05474076147 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename bad_header.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 1 ( 1 ) Summary = 10 ( 10 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 1 ( 1 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 4 ( 4 )
-TOLERANCE : MaxTol = 6.579626611e-006 ( 1e-005 ) AvgTol = 3.112972221e-006 ( 9.238461538e-006 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 1 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 2 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 2 ) LayerLabels = 1 ( 2 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = GREEN ( GREEN )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 1 ( 1 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 1 -n2 0 -total 2 -withname 1 -withcolor 2 -withlayer 2 -centroid 0 -volume 0 -area 0 -colors { GREEN } -nbcolors 1 -layers { 1 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 1 -shape 10
+checkstatshape res_1 -solid 0 -shell 0 -face 1 -freewire 0 -freeedge 0 -sharededge 4
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-005 -avg 9.238461538e-006]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 1 -n2 0 -total 2 -withname 1 -withcolor 2 -withlayer 2 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { GREEN } -nbcolors 1 -layers { 1 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 1 -shape 10 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 1 -freewire 0 -freeedge 0 -sharededge 4 -max_solid 0 -max_shell 0 -max_face 1 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 6.579626611e-006 -avg 3.112972221e-006 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename bague.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 88 ( 75 ) Summary = 88 ( 75 )
-CHECKSHAPE : Wires = 1 ( 1 ) Faces = 1 ( 1 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 1 ) Shell = 0 ( 1 ) Face = 320 ( 320 ) Summary = 4995 ( 4896 )
-STATSHAPE : Solid = 0 ( 1 ) Shell = 0 ( 1 ) Face = 320 ( 320 ) FreeWire = 0 ( 0 ) FreeEdge = 218 ( 218 ) SharedEdge = 2066 ( 2024 )
-TOLERANCE : MaxTol = 0.9408369253 ( 1.136317349 ) AvgTol = 0.03468777686 ( 0.04030133427 )
-LABELS : N0Labels = 521 ( 521 ) N1Labels = 18 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 539 ( 521 ) NameLabels = 521 ( 521 ) ColorLabels = 537 ( 521 ) LayerLabels = 455 ( 439 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 4 ( 4 )
-COLORS : Colors = LEMONCHIFFON1 LIGHTSTEELBLUE2 RED WHITE ( LEMONCHIFFON1 LIGHTSTEELBLUE2 RED WHITE )
-NLAYERS : NLayers = 5 ( 5 )
-LAYERS : Layers = 10 126 130 26 60 ( 10 126 130 26 60 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 80 -max_faults 0
+checkxstat D_First -n0 521 -n1 0 -n2 0 -total 521 -withname 521 -withcolor 521 -withlayer 439 -centroid 0 -volume 0 -area 0 -colors { LEMONCHIFFON1 LIGHTSTEELBLUE2 RED WHITE } -nbcolors 4 -layers { 10 126 130 26 60 } -nblayers 5
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 1 -max_faces 1 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 320 -shape 4896
+checkstatshape res_1 -solid 1 -shell 1 -face 320 -freewire 0 -freeedge 218 -sharededge 2024
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.136317349 -avg 0.04030133427]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 80 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 89 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 521 -n1 0 -n2 0 -total 521 -withname 521 -withcolor 521 -withlayer 439 -centroid 0 -volume 0 -area 0 -nbcolors 4 -nblayers 5
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 521 -n1 18 -n2 0 -total 539 -withname 521 -withcolor 537 -withlayer 455 -centroid 0 -volume 0 -area 0 -colors { LEMONCHIFFON1 LIGHTSTEELBLUE2 RED WHITE } -nbcolors 4 -layers { 10 126 130 26 60 } -nblayers 5
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 1 -max_faces 1 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 1 -max_faces 1 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 320 -shape 4995 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 320 -freewire 0 -freeedge 218 -sharededge 2066 -max_solid 1 -max_shell 1 -max_face 320 -max_freewire 0 -max_freeedge 218
+checkmaxtol res_2 -tol 0.9408369253 -avg 0.03468777686 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
-puts "TODO CR23096 ALL: Error : 3 differences with reference data found"
+puts "TODO CR23096 ALL: Error : is WRONG because number of SHAPE entities in shape "
+puts "TODO CR23096 ALL: STATSHAPE : Faulty ref number of shared edges in command statshape"
-set LinuxDiff 2
set filename brazo1.igs
-set ref_data {
-DATA : Faulties = 0 ( 2 ) Warnings = 0 ( 0 ) Summary = 0 ( 2 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 139 ( 454 ) Summary = 139 ( 454 )
-CHECKSHAPE : Wires = 6 ( 8 ) Faces = 6 ( 8 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 223 ( 223 ) Summary = 4710 ( 4574 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 223 ( 223 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 2166 ( 2092 )
-TOLERANCE : MaxTol = 0.991254355 ( 0.991254355 ) AvgTol = 0.01133191355 ( 0.01225911215 )
-LABELS : N0Labels = 223 ( 223 ) N1Labels = 0 ( 222 ) N2Labels = 0 ( 0 ) TotalLabels = 223 ( 445 ) NameLabels = 223 ( 389 ) ColorLabels = 223 ( 445 ) LayerLabels = 223 ( 445 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 3 ( 3 )
-COLORS : Colors = BLUE1 MAGENTA1 YELLOW ( BLUE1 MAGENTA1 YELLOW )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 4 ( 4 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 2
+checkdoc "tpstat c" -max_warns 478 -max_faults 0
+checkxstat D_First -n0 223 -n1 222 -n2 0 -total 445 -withname 389 -withcolor 445 -withlayer 445 -centroid 0 -volume 0 -area 0 -colors { BLUE1 MAGENTA1 YELLOW } -nbcolors 3 -layers { 4 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 8 -max_faces 8 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 223 -shape 4574
+checkstatshape res_1 -solid 0 -shell 0 -face 223 -freewire 0 -freeedge 0 -sharededge 2092
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.991254355 -avg 0.01225911215]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 2
+checkdoc "tpstat c" -max_warns 478 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 154 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 223 -n1 222 -n2 0 -total 445 -withname 389 -withcolor 445 -withlayer 445 -centroid 0 -volume 0 -area 0 -nbcolors 3 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 223 -n1 0 -n2 0 -total 223 -withname 223 -withcolor 223 -withlayer 223 -centroid 0 -volume 0 -area 0 -colors { BLUE1 MAGENTA1 YELLOW } -nbcolors 3 -layers { 4 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 8 -max_faces 8 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 6 -max_faces 6 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 223 -shape 4710 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 223 -freewire 0 -freeedge 0 -sharededge 2166 -max_solid 0 -max_shell 0 -max_face 223 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.991254355 -avg 0.01133191355 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename igsBF6.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 4 ) Warnings = 122 ( 2490 ) Summary = 122 ( 2494 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 478 ( 478 ) Summary = 9620 ( 9620 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 478 ( 478 ) FreeWire = 11 ( 11 ) FreeEdge = 679 ( 679 ) SharedEdge = 4098 ( 4098 )
-TOLERANCE : MaxTol = 0.7255001399 ( 0.7254994252 ) AvgTol = 0.00150384607 ( 0.001491267872 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 856 ( 1636 ) N2Labels = 0 ( 0 ) TotalLabels = 857 ( 1637 ) NameLabels = 857 ( 1390 ) ColorLabels = 856 ( 1636 ) LayerLabels = 856 ( 1636 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 10 ( 10 )
-COLORS : Colors = BLUE1 CYAN1 GREEN MAGENTA1 MAGENTA3 RED TURQUOISE4 WHITE YELLOW YELLOW4 ( BLUE1 CYAN1 GREEN MAGENTA1 MAGENTA3 RED TURQUOISE4 WHITE YELLOW YELLOW4 )
-NLAYERS : NLayers = 3 ( 3 )
-LAYERS : Layers = 1 141 71 ( 1 141 71 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2490 -max_faults 4
+checkxstat D_First -n0 1 -n1 1636 -n2 0 -total 1637 -withname 1390 -withcolor 1636 -withlayer 1636 -centroid 0 -volume 0 -area 0 -colors { BLUE1 CYAN1 GREEN MAGENTA1 MAGENTA3 RED TURQUOISE4 WHITE YELLOW YELLOW4 } -nbcolors 10 -layers { 1 141 71 } -nblayers 3
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 478 -shape 9620
+checkstatshape res_1 -solid 0 -shell 0 -face 478 -freewire 11 -freeedge 679 -sharededge 4098
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.7254994252 -avg 0.001491267872]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2490 -max_faults 4
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 122 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 1636 -n2 0 -total 1637 -withname 1390 -withcolor 1636 -withlayer 1636 -centroid 0 -volume 0 -area 0 -nbcolors 10 -nblayers 3
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 856 -n2 0 -total 857 -withname 857 -withcolor 856 -withlayer 856 -centroid 0 -volume 0 -area 0 -colors { BLUE1 CYAN1 GREEN MAGENTA1 MAGENTA3 RED TURQUOISE4 WHITE YELLOW YELLOW4 } -nbcolors 10 -layers { 1 141 71 } -nblayers 3
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 478 -shape 9620 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 478 -freewire 11 -freeedge 679 -sharededge 4098 -max_solid 0 -max_shell 0 -max_face 478 -max_freewire 11 -max_freeedge 679
+checkmaxtol res_2 -tol 0.7255001399 -avg 0.00150384607 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: NBSHAPES : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
-set LinuxDiff 1
set filename igsFB2.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 97 ( 771 ) Summary = 97 ( 771 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 770 ( 770 ) Summary = 12751 ( 12759 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 770 ( 770 ) FreeWire = 36 ( 36 ) FreeEdge = 232 ( 232 ) SharedEdge = 5541 ( 5545 )
-TOLERANCE : MaxTol = 0.9845041621 ( 0.9845038147 ) AvgTol = 0.00992720939 ( 0.009919874447 )
-LABELS : N0Labels = 880 ( 880 ) N1Labels = 0 ( 620 ) N2Labels = 0 ( 0 ) TotalLabels = 880 ( 1500 ) NameLabels = 880 ( 1500 ) ColorLabels = 844 ( 1500 ) LayerLabels = 844 ( 1500 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = BLACK ( BLACK )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 1 ( 1 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 771 -max_faults 0
+checkxstat D_First -n0 880 -n1 620 -n2 0 -total 1500 -withname 1500 -withcolor 1500 -withlayer 1500 -centroid 0 -volume 0 -area 0 -colors { BLACK } -nbcolors 1 -layers { 1 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 770 -shape 12759
+checkstatshape res_1 -solid 0 -shell 0 -face 770 -freewire 36 -freeedge 232 -sharededge 5545
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.9845038147 -avg 0.009919874447]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 771 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 97 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 880 -n1 620 -n2 0 -total 1500 -withname 1500 -withcolor 1500 -withlayer 1500 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 880 -n1 0 -n2 0 -total 880 -withname 880 -withcolor 844 -withlayer 844 -centroid 0 -volume 0 -area 0 -colors { BLACK } -nbcolors 1 -layers { 1 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 770 -shape 12751 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 770 -freewire 36 -freeedge 232 -sharededge 5541 -max_solid 0 -max_shell 0 -max_face 770 -max_freewire 36 -max_freeedge 232
+checkmaxtol res_2 -tol 0.9845041621 -avg 0.00992720939 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
-set LinuxDiff 2
set filename ims001.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 1 ) Summary = 0 ( 1 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 11 ( 2 ) Summary = 11 ( 2 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 1 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 190 ( 190 ) Summary = 2158 ( 2158 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 190 ( 190 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 887 ( 887 )
-TOLERANCE : MaxTol = 0.6881447912 ( 0.6881447942 ) AvgTol = 0.02957229252 ( 0.02969463719 )
-LABELS : N0Labels = 190 ( 190 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 190 ( 190 ) NameLabels = 190 ( 190 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 3 -max_faults 0
+checkxstat D_First -n0 190 -n1 0 -n2 0 -total 190 -withname 190 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 190 -shape 2158
+checkstatshape res_1 -solid 0 -shell 0 -face 190 -freewire 0 -freeedge 0 -sharededge 887
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.6881447942 -avg 0.02969463719]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 3 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 12 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 190 -n1 0 -n2 0 -total 190 -withname 190 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 190 -n1 0 -n2 0 -total 190 -withname 190 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 1 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 190 -shape 2158 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 190 -freewire 0 -freeedge 0 -sharededge 887 -max_solid 0 -max_shell 0 -max_face 190 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.6881447912 -avg 0.02957229252 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
-set LinuxDiff 1
set filename ims003.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 38 ( 183 ) Summary = 38 ( 183 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 1 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 114 ( 114 ) Summary = 2511 ( 2510 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 114 ( 114 ) FreeWire = 23 ( 23 ) FreeEdge = 331 ( 331 ) SharedEdge = 983 ( 983 )
-TOLERANCE : MaxTol = 0.1830141575 ( 0.1830141765 ) AvgTol = 0.003295423033 ( 0.003364815075 )
-LABELS : N0Labels = 412 ( 412 ) N1Labels = 2 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 414 ( 412 ) NameLabels = 412 ( 412 ) ColorLabels = 389 ( 410 ) LayerLabels = 389 ( 410 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 5 ( 5 )
-COLORS : Colors = DARKORANGE DARKVIOLET GRAY57 GREEN WHITE ( DARKORANGE DARKVIOLET GRAY57 GREEN WHITE )
-NLAYERS : NLayers = 3 ( 3 )
-LAYERS : Layers = 1 24 25 ( 1 24 25 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 188 -max_faults 0
+checkxstat D_First -n0 412 -n1 0 -n2 0 -total 412 -withname 412 -withcolor 410 -withlayer 410 -centroid 0 -volume 0 -area 0 -colors { DARKORANGE DARKVIOLET GRAY57 GREEN WHITE } -nbcolors 5 -layers { 1 24 25 } -nblayers 3
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 1 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 114 -shape 2510
+checkstatshape res_1 -solid 0 -shell 0 -face 114 -freewire 23 -freeedge 331 -sharededge 983
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.1830141765 -avg 0.003364815075]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 188 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 37 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 412 -n1 0 -n2 0 -total 412 -withname 412 -withcolor 410 -withlayer 410 -centroid 0 -volume 0 -area 0 -nbcolors 5 -nblayers 3
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 412 -n1 2 -n2 0 -total 414 -withname 412 -withcolor 389 -withlayer 389 -centroid 0 -volume 0 -area 0 -colors { DARKORANGE DARKVIOLET GRAY57 GREEN WHITE } -nbcolors 5 -layers { 1 24 25 } -nblayers 3
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 1 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 114 -shape 2511 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 114 -freewire 23 -freeedge 331 -sharededge 983 -max_solid 0 -max_shell 0 -max_face 114 -max_freewire 23 -max_freeedge 331
+checkmaxtol res_2 -tol 0.1830141575 -avg 0.003295423033 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TOLERANCE : Faulty"
-
set filename ims006.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 82 ( 1042 ) Summary = 82 ( 1042 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 152 ( 152 ) Summary = 11105 ( 11105 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 152 ( 152 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 5400 ( 5400 )
-TOLERANCE : MaxTol = 1.340794119e-005 ( 1e-005 ) AvgTol = 3.186484805e-006 ( 9.90797456e-006 )
-LABELS : N0Labels = 152 ( 152 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 152 ( 152 ) NameLabels = 152 ( 152 ) ColorLabels = 152 ( 152 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = WHITE ( WHITE )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1042 -max_faults 0
+checkxstat D_First -n0 152 -n1 0 -n2 0 -total 152 -withname 152 -withcolor 152 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 152 -shape 11105
+checkstatshape res_1 -solid 0 -shell 0 -face 152 -freewire 0 -freeedge 0 -sharededge 5400
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-005 -avg 9.90797456e-006]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1042 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 82 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 152 -n1 0 -n2 0 -total 152 -withname 152 -withcolor 152 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 152 -n1 0 -n2 0 -total 152 -withname 152 -withcolor 152 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 152 -shape 11105 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 152 -freewire 0 -freeedge 0 -sharededge 5400 -max_solid 0 -max_shell 0 -max_face 152 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.340794119e-005 -avg 3.186484805e-006 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename ims014.igs
-set ref_data {
-DATA : Faulties = 0 ( 1096 ) Warnings = 0 ( 0 ) Summary = 0 ( 1096 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 15 ) Summary = 0 ( 15 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 106 ( 106 ) Summary = 2199 ( 2199 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 106 ( 106 ) FreeWire = 0 ( 0 ) FreeEdge = 272 ( 272 ) SharedEdge = 864 ( 864 )
-TOLERANCE : MaxTol = 0.2569678523 ( 0.2569678511 ) AvgTol = 0.002441727474 ( 0.002442511333 )
-LABELS : N0Labels = 378 ( 378 ) N1Labels = 0 ( 74 ) N2Labels = 0 ( 0 ) TotalLabels = 378 ( 452 ) NameLabels = 378 ( 378 ) ColorLabels = 374 ( 452 ) LayerLabels = 374 ( 452 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = GREEN YELLOW ( GREEN YELLOW )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 50 ( 50 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 1096
+checkdoc "tpstat c" -max_warns 15 -max_faults 0
+checkxstat D_First -n0 378 -n1 74 -n2 0 -total 452 -withname 378 -withcolor 452 -withlayer 452 -centroid 0 -volume 0 -area 0 -colors { GREEN YELLOW } -nbcolors 2 -layers { 50 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 106 -shape 2199
+checkstatshape res_1 -solid 0 -shell 0 -face 106 -freewire 0 -freeedge 272 -sharededge 864
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.2569678511 -avg 0.002442511333]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 1096
+checkdoc "tpstat c" -max_warns 15 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 378 -n1 74 -n2 0 -total 452 -withname 378 -withcolor 452 -withlayer 452 -centroid 0 -volume 0 -area 0 -nbcolors 2 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 378 -n1 0 -n2 0 -total 378 -withname 378 -withcolor 374 -withlayer 374 -centroid 0 -volume 0 -area 0 -colors { GREEN YELLOW } -nbcolors 2 -layers { 50 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 106 -shape 2199 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 106 -freewire 0 -freeedge 272 -sharededge 864 -max_solid 0 -max_shell 0 -max_face 106 -max_freewire 0 -max_freeedge 272
+checkmaxtol res_2 -tol 0.2569678523 -avg 0.002441727474 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: CHECKSHAPE : Faulty"
puts "TODO CR23096 ALL: NBSHAPES : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
puts "TODO CR23096 ALL: COLORS : Faulty"
-
set filename 919-001-T02-04-CP-VL.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 101 ( 1433 ) Summary = 101 ( 1433 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 1 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 899 ( 899 ) Summary = 24030 ( 24038 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 899 ( 899 ) FreeWire = 366 ( 366 ) FreeEdge = 3783 ( 3783 ) SharedEdge = 9384 ( 9388 )
-TOLERANCE : MaxTol = 0.3151652209 ( 0.3151652209 ) AvgTol = 0.0007056494899 ( 0.0007458034854 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 3581 ( 7900 ) N2Labels = 0 ( 0 ) TotalLabels = 3582 ( 7901 ) NameLabels = 3582 ( 4454 ) ColorLabels = 3581 ( 7900 ) LayerLabels = 3581 ( 7900 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 2 )
-COLORS : Colors = TURQUOISE ( TURQUOISE WHITE )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 1 ( 1 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1430 -max_faults 0
+checkxstat D_First -n0 1 -n1 7900 -n2 0 -total 7901 -withname 4454 -withcolor 7900 -withlayer 7900 -centroid 0 -volume 0 -area 0 -colors { TURQUOISE WHITE } -nbcolors 2 -layers { 1 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 899 -shape 24038
+checkstatshape res_1 -solid 0 -shell 0 -face 899 -freewire 366 -freeedge 3783 -sharededge 9388
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.3151652209 -avg 0.0007458034854]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1430 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 101 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 7900 -n2 0 -total 7901 -withname 4454 -withcolor 7900 -withlayer 7900 -centroid 0 -volume 0 -area 0 -nbcolors 2 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 3581 -n2 0 -total 3582 -withname 3582 -withcolor 3581 -withlayer 3581 -centroid 0 -volume 0 -area 0 -colors { TURQUOISE } -nbcolors 1 -layers { 1 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 1 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 899 -shape 24030 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 899 -freewire 366 -freeedge 3783 -sharededge 9384 -max_solid 0 -max_shell 0 -max_face 899 -max_freewire 366 -max_freeedge 3783
+checkmaxtol res_2 -tol 0.3151652209 -avg 0.0007056494899 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
puts "TODO CR23096 ALL: COLORS : Faulty"
-
set filename 919-001-T02-04-FT-VL.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 129 ( 798 ) Summary = 129 ( 798 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 426 ( 426 ) Summary = 14321 ( 14321 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 426 ( 426 ) FreeWire = 265 ( 265 ) FreeEdge = 2465 ( 2465 ) SharedEdge = 5781 ( 5781 )
-TOLERANCE : MaxTol = 0.09805261731 ( 0.09805261731 ) AvgTol = 0.0005286623368 ( 0.0005262647535 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 1739 ( 4511 ) N2Labels = 0 ( 0 ) TotalLabels = 1740 ( 4512 ) NameLabels = 1740 ( 2237 ) ColorLabels = 1739 ( 4511 ) LayerLabels = 1739 ( 4511 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 2 )
-COLORS : Colors = TURQUOISE ( TURQUOISE WHITE )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 1 ( 1 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 797 -max_faults 0
+checkxstat D_First -n0 1 -n1 4511 -n2 0 -total 4512 -withname 2237 -withcolor 4511 -withlayer 4511 -centroid 0 -volume 0 -area 0 -colors { TURQUOISE WHITE } -nbcolors 2 -layers { 1 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 426 -shape 14321
+checkstatshape res_1 -solid 0 -shell 0 -face 426 -freewire 265 -freeedge 2465 -sharededge 5781
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.09805261731 -avg 0.0005262647535]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 797 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 129 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 4511 -n2 0 -total 4512 -withname 2237 -withcolor 4511 -withlayer 4511 -centroid 0 -volume 0 -area 0 -nbcolors 2 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 1739 -n2 0 -total 1740 -withname 1740 -withcolor 1739 -withlayer 1739 -centroid 0 -volume 0 -area 0 -colors { TURQUOISE } -nbcolors 1 -layers { 1 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 426 -shape 14321 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 426 -freewire 265 -freeedge 2465 -sharededge 5781 -max_solid 0 -max_shell 0 -max_face 426 -max_freewire 265 -max_freeedge 2465
+checkmaxtol res_2 -tol 0.09805261731 -avg 0.0005286623368 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
puts "TODO CR23096 ALL: COLORS : Faulty"
-puts "TODO CR26656 Linux: Error : 1 differences with reference data found"
-
set filename 919-004-T02-01-FT-VL.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 116 ( 825 ) Summary = 116 ( 825 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 406 ( 406 ) Summary = 13718 ( 13718 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 406 ( 406 ) FreeWire = 275 ( 275 ) FreeEdge = 2361 ( 2361 ) SharedEdge = 5553 ( 5553 )
-TOLERANCE : MaxTol = 0.08309604195 ( 0.08309604195 ) AvgTol = 0.0004559007514 ( 0.0004699758829 )
-LABELS : N0Labels = 2 ( 2 ) N1Labels = 1614 ( 4301 ) N2Labels = 0 ( 0 ) TotalLabels = 1616 ( 4303 ) NameLabels = 1614 ( 2096 ) ColorLabels = 1614 ( 4302 ) LayerLabels = 1614 ( 4302 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 2 )
-COLORS : Colors = TURQUOISE ( TURQUOISE WHITE )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 1 ( 1 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 825 -max_faults 0
+checkxstat D_First -n0 2 -n1 4301 -n2 0 -total 4303 -withname 2096 -withcolor 4302 -withlayer 4302 -centroid 0 -volume 0 -area 0 -colors { TURQUOISE WHITE } -nbcolors 2 -layers { 1 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 406 -shape 13718
+checkstatshape res_1 -solid 0 -shell 0 -face 406 -freewire 275 -freeedge 2361 -sharededge 5553
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.08309604195 -avg 0.0004699758829]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 825 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 117 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 2 -n1 4301 -n2 0 -total 4303 -withname 2096 -withcolor 4302 -withlayer 4302 -centroid 0 -volume 0 -area 0 -nbcolors 2 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 2 -n1 1614 -n2 0 -total 1616 -withname 1614 -withcolor 1614 -withlayer 1614 -centroid 0 -volume 0 -area 0 -colors { TURQUOISE } -nbcolors 1 -layers { 1 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 406 -shape 13718 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 406 -freewire 275 -freeedge 2361 -sharededge 5553 -max_solid 0 -max_shell 0 -max_face 406 -max_freewire 275 -max_freeedge 2361
+checkmaxtol res_2 -tol 0.08309604195 -avg 0.0004559007514 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
puts "TODO CR23096 ALL: COLORS : Faulty"
-
set filename Amino_komatsu.igs
-set ref_data {
-DATA : Faulties = 0 ( 2 ) Warnings = 0 ( 1 ) Summary = 0 ( 3 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 21 ) Summary = 0 ( 21 )
-CHECKSHAPE : Wires = 1 ( 1 ) Faces = 1 ( 1 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 181 ( 181 ) Summary = 2235 ( 2235 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 181 ( 181 ) FreeWire = 3 ( 3 ) FreeEdge = 16 ( 16 ) SharedEdge = 934 ( 934 )
-TOLERANCE : MaxTol = 0.1814235482 ( 0.1814235485 ) AvgTol = 0.003745633978 ( 0.003756752925 )
-LABELS : N0Labels = 184 ( 359 ) N1Labels = 0 ( 3 ) N2Labels = 0 ( 0 ) TotalLabels = 184 ( 362 ) NameLabels = 184 ( 360 ) ColorLabels = 181 ( 187 ) LayerLabels = 181 ( 187 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 3 )
-COLORS : Colors = WHITE ( BLACK WHITE YELLOW )
-NLAYERS : NLayers = 4 ( 4 )
-LAYERS : Layers = 241 5 6 8 ( 241 5 6 8 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 1 -max_faults 2
+checkdoc "tpstat c" -max_warns 22 -max_faults 0
+checkxstat D_First -n0 359 -n1 3 -n2 0 -total 362 -withname 360 -withcolor 187 -withlayer 187 -centroid 0 -volume 0 -area 0 -colors { BLACK WHITE YELLOW } -nbcolors 3 -layers { 241 5 6 8 } -nblayers 4
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 1 -max_faces 1 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 181 -shape 2235
+checkstatshape res_1 -solid 0 -shell 0 -face 181 -freewire 3 -freeedge 16 -sharededge 934
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.1814235485 -avg 0.003756752925]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 1 -max_faults 2
+checkdoc "tpstat c" -max_warns 22 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 359 -n1 3 -n2 0 -total 362 -withname 360 -withcolor 187 -withlayer 187 -centroid 0 -volume 0 -area 0 -nbcolors 3 -nblayers 4
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 184 -n1 0 -n2 0 -total 184 -withname 184 -withcolor 181 -withlayer 181 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { 241 5 6 8 } -nblayers 4
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 1 -max_faces 1 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 1 -max_faces 1 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 181 -shape 2235 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 181 -freewire 3 -freeedge 16 -sharededge 934 -max_solid 0 -max_shell 0 -max_face 181 -max_freewire 3 -max_freeedge 16
+checkmaxtol res_2 -tol 0.1814235482 -avg 0.003745633978 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
puts "TODO CR23096 ALL: COLORS : Faulty"
-
set filename BUC40128.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 124 ) Summary = 0 ( 124 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 236 ( 236 ) Summary = 2780 ( 2780 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 236 ( 236 ) FreeWire = 0 ( 0 ) FreeEdge = 1 ( 1 ) SharedEdge = 1152 ( 1152 )
-TOLERANCE : MaxTol = 0.9002295152 ( 0.9002295152 ) AvgTol = 0.05182126866 ( 0.05181958953 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 237 ( 584 ) N2Labels = 0 ( 0 ) TotalLabels = 238 ( 585 ) NameLabels = 238 ( 284 ) ColorLabels = 237 ( 584 ) LayerLabels = 234 ( 581 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 8 ( 11 )
-COLORS : Colors = CYAN1 GREEN GREEN4 MAGENTA1 MAGENTA3 RED3 TURQUOISE3 WHITE ( BLUE1 CYAN1 GREEN GREEN4 MAGENTA1 MAGENTA3 RED RED3 TURQUOISE3 WHITE YELLOW )
-NLAYERS : NLayers = 2 ( 2 )
-LAYERS : Layers = 1 3 ( 1 3 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 127 -max_faults 0
+checkxstat D_First -n0 1 -n1 584 -n2 0 -total 585 -withname 284 -withcolor 584 -withlayer 581 -centroid 0 -volume 0 -area 0 -colors { BLUE1 CYAN1 GREEN GREEN4 MAGENTA1 MAGENTA3 RED RED3 TURQUOISE3 WHITE YELLOW } -nbcolors 11 -layers { 1 3 } -nblayers 2
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 236 -shape 2780
+checkstatshape res_1 -solid 0 -shell 0 -face 236 -freewire 0 -freeedge 1 -sharededge 1152
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.9002295152 -avg 0.05181958953]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 127 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 584 -n2 0 -total 585 -withname 284 -withcolor 584 -withlayer 581 -centroid 0 -volume 0 -area 0 -nbcolors 11 -nblayers 2
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 237 -n2 0 -total 238 -withname 238 -withcolor 237 -withlayer 234 -centroid 0 -volume 0 -area 0 -colors { CYAN1 GREEN GREEN4 MAGENTA1 MAGENTA3 RED3 TURQUOISE3 WHITE } -nbcolors 8 -layers { 1 3 } -nblayers 2
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 236 -shape 2780 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 236 -freewire 0 -freeedge 1 -sharededge 1152 -max_solid 0 -max_shell 0 -max_face 236 -max_freewire 0 -max_freeedge 1
+checkmaxtol res_2 -tol 0.9002295152 -avg 0.05182126866 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TOLERANCE : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename BUC40247.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 3 ) Warnings = 0 ( 5 ) Summary = 0 ( 8 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 24 ( 24 ) Summary = 255 ( 238 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 24 ( 24 ) FreeWire = 5 ( 5 ) FreeEdge = 21 ( 21 ) SharedEdge = 117 ( 100 )
-TOLERANCE : MaxTol = 1e-005 ( 1.000102274e-007 ) AvgTol = 4.58800119e-006 ( 1.000007038e-007 )
-LABELS : N0Labels = 30 ( 36 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 30 ( 36 ) NameLabels = 30 ( 36 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 5 -max_faults 3
+checkxstat D_First -n0 36 -n1 0 -n2 0 -total 36 -withname 36 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 24 -shape 238
+checkstatshape res_1 -solid 0 -shell 0 -face 24 -freewire 5 -freeedge 21 -sharededge 100
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000102274e-007 -avg 1.000007038e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 5 -max_faults 3
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 36 -n1 0 -n2 0 -total 36 -withname 36 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 30 -n1 0 -n2 0 -total 30 -withname 30 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 24 -shape 255 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 24 -freewire 5 -freeedge 21 -sharededge 117 -max_solid 0 -max_shell 0 -max_face 24 -max_freewire 5 -max_freeedge 21
+checkmaxtol res_2 -tol 1e-005 -avg 4.58800119e-006 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TOLERANCE : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
puts "TODO CR23096 ALL: LAYERS : Faulty"
-
set filename BUC50001.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 3 ( 3 ) Summary = 3 ( 3 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 1 ) Shell = 0 ( 1 ) Face = 106 ( 106 ) Summary = 1297 ( 652 )
-STATSHAPE : Solid = 0 ( 1 ) Shell = 0 ( 1 ) Face = 106 ( 106 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 542 ( 271 )
-TOLERANCE : MaxTol = 0.009362458835 ( 0.009359156996 ) AvgTol = 0.0001377417806 ( 0.0002960765184 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 1 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 1 )
-LAYERS : Layers = ( 1 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 3 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { 1 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 106 -shape 652
+checkstatshape res_1 -solid 1 -shell 1 -face 106 -freewire 0 -freeedge 0 -sharededge 271
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.009359156996 -avg 0.0002960765184]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 3 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 3 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 1 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 106 -shape 1297 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 106 -freewire 0 -freeedge 0 -sharededge 542 -max_solid 1 -max_shell 1 -max_face 106 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.009362458835 -avg 0.0001377417806 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: DATA : Faulty"
puts "TODO CR23096 ALL: TPSTAT : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename BUC50003.igs
-set ref_data {
-DATA : Faulties = 1 ( 0 ) Warnings = 0 ( 0 ) Summary = 1 ( 0 )
-TPSTAT : Faulties = 2 ( 0 ) Warnings = 18 ( 320 ) Summary = 20 ( 320 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 135 ( 135 ) Summary = 2223 ( 2223 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 135 ( 135 ) FreeWire = 0 ( 0 ) FreeEdge = 3 ( 3 ) SharedEdge = 974 ( 974 )
-TOLERANCE : MaxTol = 0.9794163281 ( 12.54323842 ) AvgTol = 0.02080508938 ( 0.1727731057 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 138 ( 758 ) N2Labels = 0 ( 0 ) TotalLabels = 139 ( 759 ) NameLabels = 139 ( 205 ) ColorLabels = 138 ( 758 ) LayerLabels = 138 ( 758 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 4 ( 4 )
-COLORS : Colors = GOLD3 MAGENTA4 PLUM1 YELLOW2 ( GOLD3 MAGENTA4 PLUM1 YELLOW2 )
-NLAYERS : NLayers = 4 ( 4 )
-LAYERS : Layers = 100 50 60 70 ( 100 50 60 70 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 329 -max_faults 0
+checkxstat D_First -n0 1 -n1 758 -n2 0 -total 759 -withname 205 -withcolor 758 -withlayer 758 -centroid 0 -volume 0 -area 0 -colors { GOLD3 MAGENTA4 PLUM1 YELLOW2 } -nbcolors 4 -layers { 100 50 60 70 } -nblayers 4
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 135 -shape 2223
+checkstatshape res_1 -solid 0 -shell 0 -face 135 -freewire 0 -freeedge 3 -sharededge 974
+set max_tol_res_1 [checkmaxtol res_1 -tol 12.54323842 -avg 0.1727731057]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 329 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 1
+checkdoc "tpstat c" -max_warns 21 -max_faults 2
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 758 -n2 0 -total 759 -withname 205 -withcolor 758 -withlayer 758 -centroid 0 -volume 0 -area 0 -nbcolors 4 -nblayers 4
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 138 -n2 0 -total 139 -withname 139 -withcolor 138 -withlayer 138 -centroid 0 -volume 0 -area 0 -colors { GOLD3 MAGENTA4 PLUM1 YELLOW2 } -nbcolors 4 -layers { 100 50 60 70 } -nblayers 4
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 135 -shape 2223 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 135 -freewire 0 -freeedge 3 -sharededge 974 -max_solid 0 -max_shell 0 -max_face 135 -max_freewire 0 -max_freeedge 3
+checkmaxtol res_2 -tol 0.9794163281 -avg 0.02080508938 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TOLERANCE : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
puts "TODO CR23096 ALL: LAYERS : Faulty"
-
set filename BUC50027.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 3 ( 3 ) Summary = 3 ( 3 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 1 ) Shell = 0 ( 1 ) Face = 106 ( 106 ) Summary = 1297 ( 652 )
-STATSHAPE : Solid = 0 ( 1 ) Shell = 0 ( 1 ) Face = 106 ( 106 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 542 ( 271 )
-TOLERANCE : MaxTol = 0.00938336572 ( 0.009380052786 ) AvgTol = 0.000138166271 ( 0.0002969872299 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 1 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 1 )
-LAYERS : Layers = ( 1 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 3 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { 1 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 106 -shape 652
+checkstatshape res_1 -solid 1 -shell 1 -face 106 -freewire 0 -freeedge 0 -sharededge 271
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.009380052786 -avg 0.0002969872299]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 3 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 3 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 1 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 106 -shape 1297 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 106 -freewire 0 -freeedge 0 -sharededge 542 -max_solid 1 -max_shell 1 -max_face 106 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.00938336572 -avg 0.000138166271 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
puts "TODO CR23096 ALL: COLORS : Faulty"
-
set filename BUC50028.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 211 ( 2186 ) Summary = 211 ( 2186 )
-CHECKSHAPE : Wires = 0 ( 1 ) Faces = 0 ( 1 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 872 ( 872 ) Summary = 30411 ( 30408 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 872 ( 872 ) FreeWire = 39 ( 39 ) FreeEdge = 979 ( 979 ) SharedEdge = 14223 ( 14222 )
-TOLERANCE : MaxTol = 0.9989623361 ( 0.9989623361 ) AvgTol = 0.00936440041 ( 0.009365667686 )
-LABELS : N0Labels = 1063 ( 1063 ) N1Labels = 0 ( 1675 ) N2Labels = 0 ( 0 ) TotalLabels = 1063 ( 2738 ) NameLabels = 1063 ( 1644 ) ColorLabels = 1024 ( 2738 ) LayerLabels = 1024 ( 2738 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 4 ( 5 )
-COLORS : Colors = BLUE1 MAGENTA1 RED WHITE ( BLUE1 GREEN MAGENTA1 RED WHITE )
-NLAYERS : NLayers = 5 ( 5 )
-LAYERS : Layers = 1 10 12 2 4 ( 1 10 12 2 4 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2206 -max_faults 0
+checkxstat D_First -n0 1063 -n1 1675 -n2 0 -total 2738 -withname 1644 -withcolor 2738 -withlayer 2738 -centroid 0 -volume 0 -area 0 -colors { BLUE1 GREEN MAGENTA1 RED WHITE } -nbcolors 5 -layers { 1 10 12 2 4 } -nblayers 5
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 1 -max_faces 1 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 872 -shape 30408
+checkstatshape res_1 -solid 0 -shell 0 -face 872 -freewire 39 -freeedge 979 -sharededge 14222
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.9989623361 -avg 0.009365667686]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2206 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 215 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1063 -n1 1675 -n2 0 -total 2738 -withname 1644 -withcolor 2738 -withlayer 2738 -centroid 0 -volume 0 -area 0 -nbcolors 5 -nblayers 5
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1063 -n1 0 -n2 0 -total 1063 -withname 1063 -withcolor 1024 -withlayer 1024 -centroid 0 -volume 0 -area 0 -colors { BLUE1 MAGENTA1 RED WHITE } -nbcolors 4 -layers { 1 10 12 2 4 } -nblayers 5
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 1 -max_faces 1 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 872 -shape 30411 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 872 -freewire 39 -freeedge 979 -sharededge 14223 -max_solid 0 -max_shell 0 -max_face 872 -max_freewire 39 -max_freeedge 979
+checkmaxtol res_2 -tol 0.9989623361 -avg 0.00936440041 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
puts "TODO CR23096 ALL: COLORS : Faulty"
-
set filename BUC50030.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 19 ( 394 ) Summary = 19 ( 394 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 771 ( 771 ) Summary = 15422 ( 15404 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 771 ( 771 ) FreeWire = 0 ( 0 ) FreeEdge = 1291 ( 1291 ) SharedEdge = 6301 ( 6303 )
-TOLERANCE : MaxTol = 0.9439922085 ( 0.944086605 ) AvgTol = 0.005963915093 ( 0.005983396104 )
-LABELS : N0Labels = 2062 ( 2062 ) N1Labels = 6 ( 1047 ) N2Labels = 0 ( 0 ) TotalLabels = 2068 ( 3109 ) NameLabels = 2062 ( 2062 ) ColorLabels = 2037 ( 3109 ) LayerLabels = 2037 ( 3109 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 3 ( 4 )
-COLORS : Colors = BLACK MAGENTA1 RED ( BLACK MAGENTA1 RED WHITE )
-NLAYERS : NLayers = 6 ( 6 )
-LAYERS : Layers = 101 151 152 154 156 230 ( 101 151 152 154 156 230 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 389 -max_faults 0
+checkxstat D_First -n0 2062 -n1 1047 -n2 0 -total 3109 -withname 2062 -withcolor 3109 -withlayer 3109 -centroid 0 -volume 0 -area 0 -colors { BLACK MAGENTA1 RED WHITE } -nbcolors 4 -layers { 101 151 152 154 156 230 } -nblayers 6
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 771 -shape 15404
+checkstatshape res_1 -solid 0 -shell 0 -face 771 -freewire 0 -freeedge 1291 -sharededge 6303
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.944086605 -avg 0.005983396104]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 389 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 22 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 2062 -n1 1047 -n2 0 -total 3109 -withname 2062 -withcolor 3109 -withlayer 3109 -centroid 0 -volume 0 -area 0 -nbcolors 4 -nblayers 6
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 2062 -n1 6 -n2 0 -total 2068 -withname 2062 -withcolor 2037 -withlayer 2037 -centroid 0 -volume 0 -area 0 -colors { BLACK MAGENTA1 RED } -nbcolors 3 -layers { 101 151 152 154 156 230 } -nblayers 6
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 771 -shape 15422 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 771 -freewire 0 -freeedge 1291 -sharededge 6301 -max_solid 0 -max_shell 0 -max_face 771 -max_freewire 0 -max_freeedge 1291
+checkmaxtol res_2 -tol 0.9439922085 -avg 0.005963915093 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
puts "TODO CR23096 ALL: LAYERS : Faulty"
-
set filename BUC50048.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 1 ( 290 ) Summary = 1 ( 290 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 328 ( 328 ) Summary = 8546 ( 8546 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 328 ( 328 ) FreeWire = 53 ( 53 ) FreeEdge = 1431 ( 1431 ) SharedEdge = 3217 ( 3217 )
-TOLERANCE : MaxTol = 0.4274072109 ( 0.4274072101 ) AvgTol = 0.001821024602 ( 0.001852637256 )
-LABELS : N0Labels = 10 ( 10 ) N1Labels = 1565 ( 2565 ) N2Labels = 0 ( 0 ) TotalLabels = 1575 ( 2575 ) NameLabels = 1575 ( 1851 ) ColorLabels = 1570 ( 2570 ) LayerLabels = 1570 ( 2570 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 8 ( 8 )
-COLORS : Colors = BLUE1 GREEN GREEN4 MEDIUMORCHID RED TURQUOISE1 WHITE YELLOW ( BLUE1 GREEN GREEN4 MEDIUMORCHID RED TURQUOISE1 WHITE YELLOW )
-NLAYERS : NLayers = 18 ( 19 )
-LAYERS : Layers = 101 110 115 116 117 118 119 120 130 135 136 137 138 181 40 41 43 44 ( 101 110 115 116 117 118 119 120 130 135 136 137 138 181 185 40 41 43 44 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 2 -max_faults 0
+checkdoc "tpstat c" -max_warns 314 -max_faults 0
+checkxstat D_First -n0 10 -n1 2565 -n2 0 -total 2575 -withname 1851 -withcolor 2570 -withlayer 2570 -centroid 0 -volume 0 -area 0 -colors { BLUE1 GREEN GREEN4 MEDIUMORCHID RED TURQUOISE1 WHITE YELLOW } -nbcolors 8 -layers { 101 110 115 116 117 118 119 120 130 135 136 137 138 181 185 40 41 43 44 } -nblayers 19
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 328 -shape 8546
+checkstatshape res_1 -solid 0 -shell 0 -face 328 -freewire 53 -freeedge 1431 -sharededge 3217
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.4274072101 -avg 0.001852637256]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 2 -max_faults 0
+checkdoc "tpstat c" -max_warns 314 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 10 -n1 2565 -n2 0 -total 2575 -withname 1851 -withcolor 2570 -withlayer 2570 -centroid 0 -volume 0 -area 0 -nbcolors 8 -nblayers 19
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 10 -n1 1565 -n2 0 -total 1575 -withname 1575 -withcolor 1570 -withlayer 1570 -centroid 0 -volume 0 -area 0 -colors { BLUE1 GREEN GREEN4 MEDIUMORCHID RED TURQUOISE1 WHITE YELLOW } -nbcolors 8 -layers { 101 110 115 116 117 118 119 120 130 135 136 137 138 181 40 41 43 44 } -nblayers 18
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 328 -shape 8546 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 328 -freewire 53 -freeedge 1431 -sharededge 3217 -max_solid 0 -max_shell 0 -max_face 328 -max_freewire 53 -max_freeedge 1431
+checkmaxtol res_2 -tol 0.4274072109 -avg 0.001821024602 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: DATA : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
puts "TODO CR23096 ALL: LAYERS : Faulty"
-
set filename polyrepro_13juin.igs
-set ref_data {
-DATA : Faulties = 20 ( 0 ) Warnings = 0 ( 0 ) Summary = 20 ( 0 )
-TPSTAT : Faulties = 40 ( 181 ) Warnings = 83 ( 1136 ) Summary = 123 ( 1317 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 527 ( 527 ) Summary = 10204 ( 10203 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 527 ( 527 ) FreeWire = 57 ( 57 ) FreeEdge = 1172 ( 1172 ) SharedEdge = 4009 ( 4009 )
-TOLERANCE : MaxTol = 0.5505691323 ( 0.5505691341 ) AvgTol = 0.008350628685 ( 0.008366976269 )
-LABELS : N0Labels = 8 ( 8 ) N1Labels = 1544 ( 3130 ) N2Labels = 0 ( 0 ) TotalLabels = 1552 ( 3138 ) NameLabels = 1552 ( 1918 ) ColorLabels = 1544 ( 3130 ) LayerLabels = 1544 ( 3128 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 10 ( 10 )
-COLORS : Colors = BLUE1 CYAN1 GREEN MAGENTA1 MAGENTA3 MEDIUMPURPLE1 RED WHITE YELLOW YELLOW3 ( BLUE1 CYAN1 GREEN MAGENTA1 MAGENTA3 MEDIUMPURPLE1 RED WHITE YELLOW YELLOW3 )
-NLAYERS : NLayers = 35 ( 36 )
-LAYERS : Layers = 100 101 102 110 111 120 121 122 123 125 126 127 128 130 131 132 133 134 135 136 137 138 140 141 142 150 20 21 254 31 5 50 51 52 53 ( 100 101 102 110 111 120 121 122 123 125 126 127 128 130 131 132 133 134 135 136 137 138 140 141 142 150 20 21 254 30 31 5 50 51 52 53 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1168 -max_faults 181
+checkxstat D_First -n0 8 -n1 3130 -n2 0 -total 3138 -withname 1918 -withcolor 3130 -withlayer 3128 -centroid 0 -volume 0 -area 0 -colors { BLUE1 CYAN1 GREEN MAGENTA1 MAGENTA3 MEDIUMPURPLE1 RED WHITE YELLOW YELLOW3 } -nbcolors 10 -layers { 100 101 102 110 111 120 121 122 123 125 126 127 128 130 131 132 133 134 135 136 137 138 140 141 142 150 20 21 254 30 31 5 50 51 52 53 } -nblayers 36
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 527 -shape 10203
+checkstatshape res_1 -solid 0 -shell 0 -face 527 -freewire 57 -freeedge 1172 -sharededge 4009
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.5505691341 -avg 0.008366976269]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1168 -max_faults 181
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 20
+checkdoc "tpstat c" -max_warns 83 -max_faults 40
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 8 -n1 3130 -n2 0 -total 3138 -withname 1918 -withcolor 3130 -withlayer 3128 -centroid 0 -volume 0 -area 0 -nbcolors 10 -nblayers 36
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 8 -n1 1544 -n2 0 -total 1552 -withname 1552 -withcolor 1544 -withlayer 1544 -centroid 0 -volume 0 -area 0 -colors { BLUE1 CYAN1 GREEN MAGENTA1 MAGENTA3 MEDIUMPURPLE1 RED WHITE YELLOW YELLOW3 } -nbcolors 10 -layers { 100 101 102 110 111 120 121 122 123 125 126 127 128 130 131 132 133 134 135 136 137 138 140 141 142 150 20 21 254 31 5 50 51 52 53 } -nblayers 35
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 527 -shape 10204 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 527 -freewire 57 -freeedge 1172 -sharededge 4009 -max_solid 0 -max_shell 0 -max_face 527 -max_freewire 57 -max_freeedge 1172
+checkmaxtol res_2 -tol 0.5505691323 -avg 0.008350628685 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: NBSHAPES : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
puts "TODO CR23096 ALL: COLORS : Faulty"
-
set filename BUC60625-1.igs
-set ref_data {
-DATA : Faulties = 0 ( 1 ) Warnings = 0 ( 83 ) Summary = 0 ( 84 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 6 ( 63 ) Summary = 6 ( 63 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 120 ( 120 ) Summary = 5872 ( 5876 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 120 ( 120 ) FreeWire = 31 ( 31 ) FreeEdge = 1039 ( 1039 ) SharedEdge = 2356 ( 2356 )
-TOLERANCE : MaxTol = 1.421161348e-06 ( 1e-05 ) AvgTol = 1.219850877e-07 ( 3.646635427e-06 )
-LABELS : N0Labels = 1051 ( 1051 ) N1Labels = 0 ( 448 ) N2Labels = 0 ( 0 ) TotalLabels = 1051 ( 1499 ) NameLabels = 1051 ( 1051 ) ColorLabels = 822 ( 1300 ) LayerLabels = 971 ( 1499 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 2 ( 3 )
-COLORS : Colors = CYAN1 WHITE ( CYAN1 RED WHITE )
-NLAYERS : NLayers = 7 ( 7 )
-LAYERS : Layers = 1 100 63 70 97 98 99 ( 1 100 63 70 97 98 99 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 83 -max_faults 1
+checkdoc "tpstat c" -max_warns 63 -max_faults 0
+checkxstat D_First -n0 1051 -n1 448 -n2 0 -total 1499 -withname 1051 -withcolor 1300 -withlayer 1499 -centroid 0 -volume 0 -area 0 -colors { CYAN1 RED WHITE } -nbcolors 3 -layers { 1 100 63 70 97 98 99 } -nblayers 7
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 120 -shape 5876
+checkstatshape res_1 -solid 0 -shell 0 -face 120 -freewire 31 -freeedge 1039 -sharededge 2356
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-05 -avg 3.646635427e-06]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 83 -max_faults 1
+checkdoc "tpstat c" -max_warns 63 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 6 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1051 -n1 448 -n2 0 -total 1499 -withname 1051 -withcolor 1300 -withlayer 1499 -centroid 0 -volume 0 -area 0 -nbcolors 3 -nblayers 7
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1051 -n1 0 -n2 0 -total 1051 -withname 1051 -withcolor 822 -withlayer 971 -centroid 0 -volume 0 -area 0 -colors { CYAN1 WHITE } -nbcolors 2 -layers { 1 100 63 70 97 98 99 } -nblayers 7
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 120 -shape 5872 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 120 -freewire 31 -freeedge 1039 -sharededge 2356 -max_solid 0 -max_shell 0 -max_face 120 -max_freewire 31 -max_freeedge 1039
+checkmaxtol res_2 -tol 1.421161348e-06 -avg 1.219850877e-07 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
puts "TODO CR23096 ALL: STATSHAPE : Faulty"
-puts "TODO CR23096 ALL: Error : 3 differences with reference data found"
+puts "TODO CR23096 ALL: Error : is WRONG because number of SHAPE entities in shape"
+puts "TODO CR23096 ALL: Error : is WRONG because number of FACE entities in shape"
+
-set LinuxDiff 5
set filename BUC60743.igs
-set ref_data {
-DATA : Faulties = 0 ( 2 ) Warnings = 0 ( 0 ) Summary = 0 ( 2 )
-TPSTAT : Faulties = 3 ( 59 ) Warnings = 2203 ( 4655 ) Summary = 2206 ( 4714 )
-CHECKSHAPE : Wires = 7 ( 17 ) Faces = 7 ( 12 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 3349 ( 2837 ) Summary = 45927 ( 39202 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 3349 ( 3349 ) FreeWire = 6 ( 6 ) FreeEdge = 67 ( 67 ) SharedEdge = 19607 ( 16774 )
-TOLERANCE : MaxTol = 4.854604894 ( 5.769095076 ) AvgTol = 0.01628658326 ( 0.01747356296 )
-LABELS : N0Labels = 11 ( 11 ) N1Labels = 2891 ( 6327 ) N2Labels = 0 ( 0 ) TotalLabels = 2902 ( 6338 ) NameLabels = 2900 ( 5879 ) ColorLabels = 2891 ( 6327 ) LayerLabels = 2411 ( 5258 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 4 ( 4 )
-COLORS : Colors = BLACK BLUE1 RED YELLOW ( BLACK BLUE1 RED YELLOW )
-NLAYERS : NLayers = 3 ( 3 )
-LAYERS : Layers = 200 3 4 ( 200 3 4 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 2
+checkdoc "tpstat c" -max_warns 4736 -max_faults 59
+checkxstat D_First -n0 11 -n1 6327 -n2 0 -total 6338 -withname 5879 -withcolor 6327 -withlayer 5258 -centroid 0 -volume 0 -area 0 -colors { BLACK BLUE1 RED YELLOW } -nbcolors 4 -layers { 200 3 4 } -nblayers 3
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 17 -max_faces 12 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 2837 -shape 39202
+checkstatshape res_1 -solid 0 -shell 0 -face 3349 -freewire 6 -freeedge 67 -sharededge 16774
+set max_tol_res_1 [checkmaxtol res_1 -tol 5.769095076 -avg 0.01747356296]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 2
+checkdoc "tpstat c" -max_warns 4736 -max_faults 59
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2206 -max_faults 3
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 11 -n1 6327 -n2 0 -total 6338 -withname 5879 -withcolor 6327 -withlayer 5258 -centroid 0 -volume 0 -area 0 -nbcolors 4 -nblayers 3
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 11 -n1 2891 -n2 0 -total 2902 -withname 2900 -withcolor 2891 -withlayer 2411 -centroid 0 -volume 0 -area 0 -colors { BLACK BLUE1 RED YELLOW } -nbcolors 4 -layers { 200 3 4 } -nblayers 3
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 17 -max_faces 12 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 7 -max_faces 7 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 3349 -shape 45927 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 3349 -freewire 6 -freeedge 67 -sharededge 19607 -max_solid 0 -max_shell 0 -max_face 3349 -max_freewire 6 -max_freeedge 67
+checkmaxtol res_2 -tol 4.854604894 -avg 0.01628658326 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: STATSHAPE : Faulty"
set filename CCI60011.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 5 ( 11 ) Summary = 5 ( 11 )
-CHECKSHAPE : Wires = 1 ( 3 ) Faces = 1 ( 3 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 1147 ( 1145 ) Summary = 14655 ( 14650 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 1147 ( 1145 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 6190 ( 6189 )
-TOLERANCE : MaxTol = 0.9825787092 ( 0.9825787092 ) AvgTol = 0.04100800214 ( 0.04103795487 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 11 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 3 -max_faces 3 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 1145 -shape 14650
+checkstatshape res_1 -solid 0 -shell 0 -face 1145 -freewire 0 -freeedge 0 -sharededge 6189
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.9825787092 -avg 0.04103795487]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 11 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 6 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 3 -max_faces 3 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 1 -max_faces 1 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 1147 -shape 14655 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 1147 -freewire 0 -freeedge 0 -sharededge 6190 -max_solid 0 -max_shell 0 -max_face 1145 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.9825787092 -avg 0.04100800214 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: DATA : Faulty"
puts "TODO CR23096 ALL: TPSTAT : Faulty"
puts "TODO CR23096 ALL: NBSHAPES : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename CTS17804.igs
-set ref_data {
-DATA : Faulties = 1 ( 0 ) Warnings = 0 ( 450 ) Summary = 1 ( 450 )
-TPSTAT : Faulties = 2 ( 0 ) Warnings = 38 ( 278 ) Summary = 40 ( 278 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 218 ( 218 ) Summary = 2957 ( 2963 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 218 ( 218 ) FreeWire = 0 ( 0 ) FreeEdge = 12 ( 12 ) SharedEdge = 1254 ( 1260 )
-TOLERANCE : MaxTol = 0.07760384877 ( 0.07760384877 ) AvgTol = 0.001773555557 ( 0.001789792746 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 230 ( 883 ) N2Labels = 0 ( 0 ) TotalLabels = 231 ( 884 ) NameLabels = 231 ( 369 ) ColorLabels = 230 ( 883 ) LayerLabels = 230 ( 883 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = YELLOW ( YELLOW )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 20 ( 20 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 450 -max_faults 0
+checkdoc "tpstat c" -max_warns 280 -max_faults 0
+checkxstat D_First -n0 1 -n1 883 -n2 0 -total 884 -withname 369 -withcolor 883 -withlayer 883 -centroid 0 -volume 0 -area 0 -colors { YELLOW } -nbcolors 1 -layers { 20 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 218 -shape 2963
+checkstatshape res_1 -solid 0 -shell 0 -face 218 -freewire 0 -freeedge 12 -sharededge 1260
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.07760384877 -avg 0.001789792746]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 450 -max_faults 0
+checkdoc "tpstat c" -max_warns 280 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 1
+checkdoc "tpstat c" -max_warns 38 -max_faults 2
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 883 -n2 0 -total 884 -withname 369 -withcolor 883 -withlayer 883 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 230 -n2 0 -total 231 -withname 231 -withcolor 230 -withlayer 230 -centroid 0 -volume 0 -area 0 -colors { YELLOW } -nbcolors 1 -layers { 20 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 218 -shape 2957 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 218 -freewire 0 -freeedge 12 -sharededge 1254 -max_solid 0 -max_shell 0 -max_face 218 -max_freewire 0 -max_freeedge 12
+checkmaxtol res_2 -tol 0.07760384877 -avg 0.001773555557 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
puts "TODO CR23096 ALL: COLORS : Faulty"
-
set filename CTS17805.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 19 ) Warnings = 34 ( 193 ) Summary = 34 ( 212 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 56 ( 56 ) Summary = 2106 ( 2106 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 56 ( 56 ) FreeWire = 38 ( 38 ) FreeEdge = 418 ( 418 ) SharedEdge = 856 ( 856 )
-TOLERANCE : MaxTol = 0.4238514896 ( 0.4238514534 ) AvgTol = 0.006092761948 ( 0.006092400782 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 252 ( 542 ) N2Labels = 0 ( 0 ) TotalLabels = 253 ( 543 ) NameLabels = 253 ( 331 ) ColorLabels = 252 ( 542 ) LayerLabels = 178 ( 206 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 4 ( 5 )
-COLORS : Colors = BLUE1 MAGENTA1 RED WHITE ( BLUE1 MAGENTA1 RED WHITE YELLOW )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 10 ( 10 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 203 -max_faults 19
+checkxstat D_First -n0 1 -n1 542 -n2 0 -total 543 -withname 331 -withcolor 542 -withlayer 206 -centroid 0 -volume 0 -area 0 -colors { BLUE1 MAGENTA1 RED WHITE YELLOW } -nbcolors 5 -layers { 10 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 56 -shape 2106
+checkstatshape res_1 -solid 0 -shell 0 -face 56 -freewire 38 -freeedge 418 -sharededge 856
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.4238514534 -avg 0.006092400782]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 203 -max_faults 19
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 34 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 542 -n2 0 -total 543 -withname 331 -withcolor 542 -withlayer 206 -centroid 0 -volume 0 -area 0 -nbcolors 5 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 252 -n2 0 -total 253 -withname 253 -withcolor 252 -withlayer 178 -centroid 0 -volume 0 -area 0 -colors { BLUE1 MAGENTA1 RED WHITE } -nbcolors 4 -layers { 10 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 56 -shape 2106 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 56 -freewire 38 -freeedge 418 -sharededge 856 -max_solid 0 -max_shell 0 -max_face 56 -max_freewire 38 -max_freeedge 418
+checkmaxtol res_2 -tol 0.4238514896 -avg 0.006092761948 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
-puts "TODO CR25013 ALL: Error : 1 differences with reference data found"
+puts "TODO CR25013 ALL: Error : is WRONG because number of FACE entities in shape"
+puts "TODO CR25013 ALL: Error : is WRONG because number of SHAPE entities in shape"
-set LinuxDiff 1
set filename pro5101.igs
-set ref_data {
-DATA : Faulties = 0 ( 1 ) Warnings = 0 ( 1 ) Summary = 0 ( 2 )
-TPSTAT : Faulties = 0 ( 9 ) Warnings = 110 ( 1040 ) Summary = 110 ( 1049 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 622 ( 311 ) Summary = 23710 ( 11832 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 622 ( 622 ) FreeWire = 816 ( 816 ) FreeEdge = 4824 ( 4824 ) SharedEdge = 10126 ( 5051 )
-TOLERANCE : MaxTol = 0.6427268663 ( 4.452116544 ) AvgTol = 0.01239717192 ( 0.01380706073 )
-LABELS : N0Labels = 7 ( 7 ) N1Labels = 379 ( 1004 ) N2Labels = 0 ( 0 ) TotalLabels = 386 ( 1011 ) NameLabels = 386 ( 1010 ) ColorLabels = 381 ( 1006 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = WHITE ( WHITE )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 1 -max_faults 1
+checkdoc "tpstat c" -max_warns 1087 -max_faults 9
+checkxstat D_First -n0 7 -n1 1004 -n2 0 -total 1011 -withname 1010 -withcolor 1006 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 311 -shape 11832
+checkstatshape res_1 -solid 0 -shell 0 -face 622 -freewire 816 -freeedge 4824 -sharededge 5051
+set max_tol_res_1 [checkmaxtol res_1 -tol 4.452116544 -avg 0.01380706073]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 1 -max_faults 1
+checkdoc "tpstat c" -max_warns 1087 -max_faults 9
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 110 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 7 -n1 1004 -n2 0 -total 1011 -withname 1010 -withcolor 1006 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 7 -n1 379 -n2 0 -total 386 -withname 386 -withcolor 381 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 622 -shape 23710 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 622 -freewire 816 -freeedge 4824 -sharededge 10126 -max_solid 0 -max_shell 0 -max_face 622 -max_freewire 816 -max_freeedge 4824
+checkmaxtol res_2 -tol 0.6427268663 -avg 0.01239717192 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: NBSHAPES : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
puts "TODO CR23096 ALL: LAYERS : Faulty"
-
set filename t_cat_424_002_sgi_hybdrw_vw_tuer_standard.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 733 ) Warnings = 64 ( 4345 ) Summary = 64 ( 5078 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 2263 ( 2263 ) Summary = 81570 ( 81625 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 2263 ( 2263 ) FreeWire = 2854 ( 2907 ) FreeEdge = 19507 ( 19507 ) SharedEdge = 29768 ( 29768 )
-TOLERANCE : MaxTol = 0.7925892163 ( 0.7925891552 ) AvgTol = 0.001587410529 ( 0.001648822728 )
-LABELS : N0Labels = 28 ( 28 ) N1Labels = 13487 ( 17629 ) N2Labels = 0 ( 0 ) TotalLabels = 13515 ( 17657 ) NameLabels = 13515 ( 17494 ) ColorLabels = 13489 ( 17629 ) LayerLabels = 13438 ( 17573 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 18 ( 18 )
-COLORS : Colors = BLUE1 CYAN1 DARKKHAKI DARKSEAGREEN2 DEEPSKYBLUE2 DODGERBLUE2 GOLD3 GREEN GREEN4 KHAKI1 LIGHTPINK1 LIGHTSEAGREEN ORANGE PALEVIOLETRED4 PLUM1 RED WHITE YELLOW ( BLUE1 CYAN1 DARKKHAKI DARKSEAGREEN2 DEEPSKYBLUE2 DODGERBLUE2 GOLD3 GREEN GREEN4 KHAKI1 LIGHTPINK1 LIGHTSEAGREEN ORANGE PALEVIOLETRED4 PLUM1 RED WHITE YELLOW )
-NLAYERS : NLayers = 45 ( 46 )
-LAYERS : Layers = 1 11 12 121 122 123 124 125 127 128 129 13 131 136 137 139 14 140 141 142 144 145 146 147 148 149 150 151 16 17 181 2 238 239 240 241 242 252 254 3 4 5 7 8 9 ( 1 11 12 121 122 123 124 125 127 128 129 13 131 136 137 139 14 140 141 142 144 145 146 147 148 149 150 151 16 17 181 2 238 239 240 241 242 250 252 254 3 4 5 7 8 9 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4336 -max_faults 733
+checkxstat D_First -n0 28 -n1 17629 -n2 0 -total 17657 -withname 17494 -withcolor 17629 -withlayer 17573 -centroid 0 -volume 0 -area 0 -colors { BLUE1 CYAN1 DARKKHAKI DARKSEAGREEN2 DEEPSKYBLUE2 DODGERBLUE2 GOLD3 GREEN GREEN4 KHAKI1 LIGHTPINK1 LIGHTSEAGREEN ORANGE PALEVIOLETRED4 PLUM1 RED WHITE YELLOW } -nbcolors 18 -layers { 1 11 12 121 122 123 124 125 127 128 129 13 131 136 137 139 14 140 141 142 144 145 146 147 148 149 150 151 16 17 181 2 238 239 240 241 242 250 252 254 3 4 5 7 8 9 } -nblayers 46
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 2263 -shape 81625
+checkstatshape res_1 -solid 0 -shell 0 -face 2263 -freewire 2907 -freeedge 19507 -sharededge 29768
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.7925891552 -avg 0.001648822728]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4336 -max_faults 733
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 68 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 28 -n1 17629 -n2 0 -total 17657 -withname 17494 -withcolor 17629 -withlayer 17573 -centroid 0 -volume 0 -area 0 -nbcolors 18 -nblayers 46
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 28 -n1 13487 -n2 0 -total 13515 -withname 13515 -withcolor 13489 -withlayer 13438 -centroid 0 -volume 0 -area 0 -colors { BLUE1 CYAN1 DARKKHAKI DARKSEAGREEN2 DEEPSKYBLUE2 DODGERBLUE2 GOLD3 GREEN GREEN4 KHAKI1 LIGHTPINK1 LIGHTSEAGREEN ORANGE PALEVIOLETRED4 PLUM1 RED WHITE YELLOW } -nbcolors 18 -layers { 1 11 12 121 122 123 124 125 127 128 129 13 131 136 137 139 14 140 141 142 144 145 146 147 148 149 150 151 16 17 181 2 238 239 240 241 242 252 254 3 4 5 7 8 9 } -nblayers 45
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 2263 -shape 81570 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 2263 -freewire 2854 -freeedge 19507 -sharededge 29768 -max_solid 0 -max_shell 0 -max_face 2263 -max_freewire 2907 -max_freeedge 19507
+checkmaxtol res_2 -tol 0.7925892163 -avg 0.001587410529 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
puts "TODO CR23096 ALL: COLORS : Faulty"
-
set filename CTS18545.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 565 ( 57 ) Summary = 565 ( 57 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 5 ) Shell = 0 ( 5 ) Face = 93 ( 93 ) Summary = 5965 ( 574 )
-STATSHAPE : Solid = 0 ( 5 ) Shell = 0 ( 5 ) Face = 93 ( 93 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 2876 ( 211 )
-TOLERANCE : MaxTol = 1e-005 ( 0.9051733624 ) AvgTol = 9.894427245e-006 ( 0.243781117 )
-LABELS : N0Labels = 1 ( 8 ) N1Labels = 93 ( 11 ) N2Labels = 0 ( 0 ) TotalLabels = 94 ( 19 ) NameLabels = 1 ( 14 ) ColorLabels = 93 ( 12 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 5 ( 6 )
-COLORS : Colors = BLUE1 GREEN MAGENTA1 RED YELLOW ( BLUE1 GREEN MAGENTA1 RED WHITE YELLOW )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 57 -max_faults 0
+checkxstat D_First -n0 8 -n1 11 -n2 0 -total 19 -withname 14 -withcolor 12 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 GREEN MAGENTA1 RED WHITE YELLOW } -nbcolors 6 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 5 -shell 5 -face 93 -shape 574
+checkstatshape res_1 -solid 5 -shell 5 -face 93 -freewire 0 -freeedge 0 -sharededge 211
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.9051733624 -avg 0.243781117]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 57 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 565 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 8 -n1 11 -n2 0 -total 19 -withname 14 -withcolor 12 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 6 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 93 -n2 0 -total 94 -withname 1 -withcolor 93 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 GREEN MAGENTA1 RED YELLOW } -nbcolors 5 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 93 -shape 5965 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 93 -freewire 0 -freeedge 0 -sharededge 2876 -max_solid 5 -max_shell 5 -max_face 93 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1e-005 -avg 9.894427245e-006 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: CHECKSHAPE : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
puts "TODO CR23096 ALL: COLORS : Faulty"
puts "TODO CR23096 ALL: NBSHAPES : Faulty"
-puts "TODO CR25013 ALL: Error : 1 differences with reference data found"
+puts "TODO CR25013 ALL: Error: Avg tolerance of res_1"
-set LinuxDiff 2
-set LinuxFaulties {NBSHAPES}
set filename CTS18547.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 49 ) Warnings = 41 ( 1012 ) Summary = 41 ( 1061 )
-CHECKSHAPE : Wires = 1 ( 1 ) Faces = 1 ( 1 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 539 ( 539 ) Summary = 12798 ( 12800 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 539 ( 539 ) FreeWire = 19 ( 21 ) FreeEdge = 1864 ( 1864 ) SharedEdge = 4957 ( 4957 )
-TOLERANCE : MaxTol = 0.7510769849 ( 0.7510769849 ) AvgTol = 0.006853010548 ( 0.007168795519 )
-LABELS : N0Labels = 65 ( 65 ) N1Labels = 2112 ( 4067 ) N2Labels = 0 ( 0 ) TotalLabels = 2177 ( 4132 ) NameLabels = 2177 ( 2778 ) ColorLabels = 2123 ( 4082 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 3 ( 4 )
-COLORS : Colors = BLUE1 WHITE YELLOW ( BLUE1 GREEN WHITE YELLOW )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1060 -max_faults 49
+checkxstat D_First -n0 65 -n1 4067 -n2 0 -total 4132 -withname 2778 -withcolor 4082 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 GREEN WHITE YELLOW } -nbcolors 4 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 1 -max_faces 1 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 539 -shape 12800
+checkstatshape res_1 -solid 0 -shell 0 -face 539 -freewire 21 -freeedge 1864 -sharededge 4957
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.7510769849 -avg 0.007168795519]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1060 -max_faults 49
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 45 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 65 -n1 4067 -n2 0 -total 4132 -withname 2778 -withcolor 4082 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 4 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 65 -n1 2112 -n2 0 -total 2177 -withname 2177 -withcolor 2123 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 WHITE YELLOW } -nbcolors 3 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 1 -max_faces 1 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 539 -shape 12798 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 539 -freewire 19 -freeedge 1864 -sharededge 4957 -max_solid 0 -max_shell 0 -max_face 539 -max_freewire 21 -max_freeedge 1864
+checkmaxtol res_2 -tol 0.7510769849 -avg 0.006853010548 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
puts "TODO CR23096 ALL: COLORS : Faulty"
-puts "TODO CR25013 ALL: Error : 2 differences with reference data found"
-
+puts "TODO CR25013 ALL: Error : is WRONG because number of SHAPE entities in shape"
+puts "TODO CR25013 ALL: STATSHAPE : Faulty ref number of shared edges in command statshape"
set filename kegel.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 25 ( 330 ) Summary = 25 ( 330 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 157 ( 157 ) Summary = 3724 ( 3723 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 157 ( 157 ) FreeWire = 34 ( 34 ) FreeEdge = 473 ( 473 ) SharedEdge = 1477 ( 1477 )
-TOLERANCE : MaxTol = 0.9504514132 ( 1.074871981 ) AvgTol = 0.0174083983 ( 0.01757881129 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 545 ( 1285 ) N2Labels = 0 ( 0 ) TotalLabels = 546 ( 1286 ) NameLabels = 546 ( 645 ) ColorLabels = 545 ( 1285 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 6 ( 7 )
-COLORS : Colors = GREEN GREEN4 MAGENTA1 WHITE YELLOW YELLOW3 ( BLUE1 GREEN GREEN4 MAGENTA1 WHITE YELLOW YELLOW3 )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 339 -max_faults 0
+checkxstat D_First -n0 1 -n1 1285 -n2 0 -total 1286 -withname 645 -withcolor 1285 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 GREEN GREEN4 MAGENTA1 WHITE YELLOW YELLOW3 } -nbcolors 7 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 157 -shape 3723
+checkstatshape res_1 -solid 0 -shell 0 -face 157 -freewire 34 -freeedge 473 -sharededge 1477
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.074871981 -avg 0.01757881129]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 339 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 25 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 1285 -n2 0 -total 1286 -withname 645 -withcolor 1285 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 7 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 545 -n2 0 -total 546 -withname 546 -withcolor 545 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { GREEN GREEN4 MAGENTA1 WHITE YELLOW YELLOW3 } -nbcolors 6 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 157 -shape 3724 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 157 -freewire 34 -freeedge 473 -sharededge 1477 -max_solid 0 -max_shell 0 -max_face 157 -max_freewire 34 -max_freeedge 473
+checkmaxtol res_2 -tol 0.9504514132 -avg 0.0174083983 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
puts "TODO 0025623 ALL: CHECKSHAPE : Faulty"
-set LinuxDiff 3
set filename Amino_172448-65210.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 56 ( 12 ) Summary = 56 ( 12 )
-CHECKSHAPE : Wires = 2 ( 1 ) Faces = 2 ( 1 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 2342 ( 1106 ) Summary = 59777 ( 25981 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 2342 ( 2342 ) FreeWire = 2328 ( 2328 ) FreeEdge = 14016 ( 14016 ) SharedEdge = 24558 ( 10692 )
-TOLERANCE : MaxTol = 0.9711309062 ( 0.9711309063 ) AvgTol = 0.01916076754 ( 0.01948753951 )
-LABELS : N0Labels = 250 ( 250 ) N1Labels = 2268 ( 3202 ) N2Labels = 0 ( 0 ) TotalLabels = 2518 ( 3452 ) NameLabels = 2518 ( 3452 ) ColorLabels = 2512 ( 3446 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 4 ( 4 )
-COLORS : Colors = CYAN1 LIGHTPINK PALEGOLDENROD ROSYBROWN ( CYAN1 LIGHTPINK PALEGOLDENROD ROSYBROWN )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 15 -max_faults 0
+checkxstat D_First -n0 250 -n1 3202 -n2 0 -total 3452 -withname 3452 -withcolor 3446 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { CYAN1 LIGHTPINK PALEGOLDENROD ROSYBROWN } -nbcolors 4 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 1 -max_faces 1 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 1106 -shape 25981
+checkstatshape res_1 -solid 0 -shell 0 -face 2342 -freewire 2328 -freeedge 14016 -sharededge 10692
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.9711309063 -avg 0.01948753951]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 15 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 75 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 250 -n1 3202 -n2 0 -total 3452 -withname 3452 -withcolor 3446 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 4 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 250 -n1 2268 -n2 0 -total 2518 -withname 2518 -withcolor 2512 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { CYAN1 LIGHTPINK PALEGOLDENROD ROSYBROWN } -nbcolors 4 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 1 -max_faces 1 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 2 -max_faces 2 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 2342 -shape 59777 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 2342 -freewire 2328 -freeedge 14016 -sharededge 24558 -max_solid 0 -max_shell 0 -max_face 2342 -max_freewire 2328 -max_freeedge 14016
+checkmaxtol res_2 -tol 0.9711309062 -avg 0.01916076754 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: NBSHAPES : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
puts "TODO CR23096 ALL: LAYERS : Faulty"
-puts "TODO CR25013 ALL: Error : 3 differences with reference data found"
-
+puts "TODO CR25013 ALL: Error : is WRONG because number of SHAPE entities in shape"
+puts "TODO CR25013 ALL: STATSHAPE : Faulty ref number of shared edges in command statshape"
set filename CATIA01.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 480 ) Warnings = 322 ( 4629 ) Summary = 322 ( 5109 )
-CHECKSHAPE : Wires = 1 ( 0 ) Faces = 1 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 732 ( 732 ) Summary = 60876 ( 60888 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 732 ( 732 ) FreeWire = 1612 ( 1613 ) FreeEdge = 16359 ( 16359 ) SharedEdge = 22927 ( 22933 )
-TOLERANCE : MaxTol = 0.6032674714 ( 0.6032674714 ) AvgTol = 0.001483351096 ( 0.00148733059 )
-LABELS : N0Labels = 4 ( 7 ) N1Labels = 11017 ( 17868 ) N2Labels = 0 ( 0 ) TotalLabels = 11021 ( 17875 ) NameLabels = 10620 ( 13085 ) ColorLabels = 11018 ( 17867 ) LayerLabels = 10517 ( 17715 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 17 ( 17 )
-COLORS : Colors = BLUE1 CYAN1 DARKGOLDENROD1 DARKSLATEGRAY1 GREEN GREEN4 LIGHTPINK1 MAGENTA1 MEDIUMPURPLE1 MEDIUMSPRINGGREEN PURPLE RED RED3 ROYALBLUE2 SEAGREEN2 WHITE YELLOW ( BLUE1 CYAN1 DARKGOLDENROD1 DARKSLATEGRAY1 GREEN GREEN4 LIGHTPINK1 MAGENTA1 MEDIUMPURPLE1 MEDIUMSPRINGGREEN PURPLE RED RED3 ROYALBLUE2 SEAGREEN2 WHITE YELLOW )
-NLAYERS : NLayers = 16 ( 17 )
-LAYERS : Layers = 1 101 102 104 106 107 108 152 154 156 158 2 240 255 6 7 ( 1 101 102 104 106 107 108 152 154 156 158 2 239 240 255 6 7 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4693 -max_faults 480
+checkxstat D_First -n0 7 -n1 17868 -n2 0 -total 17875 -withname 13085 -withcolor 17867 -withlayer 17715 -centroid 0 -volume 0 -area 0 -colors { BLUE1 CYAN1 DARKGOLDENROD1 DARKSLATEGRAY1 GREEN GREEN4 LIGHTPINK1 MAGENTA1 MEDIUMPURPLE1 MEDIUMSPRINGGREEN PURPLE RED RED3 ROYALBLUE2 SEAGREEN2 WHITE YELLOW } -nbcolors 17 -layers { 1 101 102 104 106 107 108 152 154 156 158 2 239 240 255 6 7 } -nblayers 17
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 732 -shape 60888
+checkstatshape res_1 -solid 0 -shell 0 -face 732 -freewire 1613 -freeedge 16359 -sharededge 22933
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.6032674714 -avg 0.00148733059]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4693 -max_faults 480
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 321 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 7 -n1 17868 -n2 0 -total 17875 -withname 13085 -withcolor 17867 -withlayer 17715 -centroid 0 -volume 0 -area 0 -nbcolors 17 -nblayers 17
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 4 -n1 11017 -n2 0 -total 11021 -withname 10620 -withcolor 11018 -withlayer 10517 -centroid 0 -volume 0 -area 0 -colors { BLUE1 CYAN1 DARKGOLDENROD1 DARKSLATEGRAY1 GREEN GREEN4 LIGHTPINK1 MAGENTA1 MEDIUMPURPLE1 MEDIUMSPRINGGREEN PURPLE RED RED3 ROYALBLUE2 SEAGREEN2 WHITE YELLOW } -nbcolors 17 -layers { 1 101 102 104 106 107 108 152 154 156 158 2 240 255 6 7 } -nblayers 16
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 1 -max_faces 1 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 732 -shape 60876 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 732 -freewire 1612 -freeedge 16359 -sharededge 22927 -max_solid 0 -max_shell 0 -max_face 732 -max_freewire 1613 -max_freeedge 16359
+checkmaxtol res_2 -tol 0.6032674714 -avg 0.001483351096 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: NBSHAPES : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
puts "TODO CR23096 ALL: COLORS : Faulty"
-
set filename CTS18548.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 56 ( 423 ) Summary = 56 ( 423 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 1892 ( 1892 ) Summary = 20543 ( 20544 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 1892 ( 1892 ) FreeWire = 54 ( 54 ) FreeEdge = 266 ( 266 ) SharedEdge = 8300 ( 8300 )
-TOLERANCE : MaxTol = 0.5322014093 ( 0.5322014093 ) AvgTol = 0.002295480513 ( 0.002300302351 )
-LABELS : N0Labels = 7 ( 7 ) N1Labels = 1982 ( 2455 ) N2Labels = 0 ( 0 ) TotalLabels = 1989 ( 2462 ) NameLabels = 1989 ( 2062 ) ColorLabels = 1982 ( 2455 ) LayerLabels = 1982 ( 2455 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 3 ( 4 )
-COLORS : Colors = GRAY67 GREEN YELLOW ( GRAY67 GREEN MAGENTA1 YELLOW )
-NLAYERS : NLayers = 3 ( 3 )
-LAYERS : Layers = 100 110 120 ( 100 110 120 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 425 -max_faults 0
+checkxstat D_First -n0 7 -n1 2455 -n2 0 -total 2462 -withname 2062 -withcolor 2455 -withlayer 2455 -centroid 0 -volume 0 -area 0 -colors { GRAY67 GREEN MAGENTA1 YELLOW } -nbcolors 4 -layers { 100 110 120 } -nblayers 3
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 1892 -shape 20544
+checkstatshape res_1 -solid 0 -shell 0 -face 1892 -freewire 54 -freeedge 266 -sharededge 8300
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.5322014093 -avg 0.002300302351]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 425 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 56 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 7 -n1 2455 -n2 0 -total 2462 -withname 2062 -withcolor 2455 -withlayer 2455 -centroid 0 -volume 0 -area 0 -nbcolors 4 -nblayers 3
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 7 -n1 1982 -n2 0 -total 1989 -withname 1989 -withcolor 1982 -withlayer 1982 -centroid 0 -volume 0 -area 0 -colors { GRAY67 GREEN YELLOW } -nbcolors 3 -layers { 100 110 120 } -nblayers 3
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 1892 -shape 20543 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 1892 -freewire 54 -freeedge 266 -sharededge 8300 -max_solid 0 -max_shell 0 -max_face 1892 -max_freewire 54 -max_freeedge 266
+checkmaxtol res_2 -tol 0.5322014093 -avg 0.002295480513 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TOLERANCE : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename CTS18644.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 1 ) Summary = 0 ( 1 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 2 ( 212 ) Summary = 2 ( 212 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 4004 ( 4004 ) Summary = 46702 ( 46701 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 4004 ( 4004 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 19350 ( 19350 )
-TOLERANCE : MaxTol = 0.01077402956 ( 0.005387073003 ) AvgTol = 4.979806751e-006 ( 9.076797721e-006 )
-LABELS : N0Labels = 4004 ( 4004 ) N1Labels = 0 ( 647 ) N2Labels = 0 ( 0 ) TotalLabels = 4004 ( 4651 ) NameLabels = 4004 ( 4004 ) ColorLabels = 248 ( 895 ) LayerLabels = 3366 ( 4013 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 3 ( 3 )
-COLORS : Colors = BLACK RED YELLOW ( BLACK RED YELLOW )
-NLAYERS : NLayers = 4 ( 4 )
-LAYERS : Layers = 10 2 254 50 ( 10 2 254 50 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 219 -max_faults 0
+checkxstat D_First -n0 4004 -n1 647 -n2 0 -total 4651 -withname 4004 -withcolor 895 -withlayer 4013 -centroid 0 -volume 0 -area 0 -colors { BLACK RED YELLOW } -nbcolors 3 -layers { 10 2 254 50 } -nblayers 4
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 4004 -shape 46701
+checkstatshape res_1 -solid 0 -shell 0 -face 4004 -freewire 0 -freeedge 0 -sharededge 19350
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.005387073003 -avg 9.076797721e-006]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 219 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 5 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 4004 -n1 647 -n2 0 -total 4651 -withname 4004 -withcolor 895 -withlayer 4013 -centroid 0 -volume 0 -area 0 -nbcolors 3 -nblayers 4
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 4004 -n1 0 -n2 0 -total 4004 -withname 4004 -withcolor 248 -withlayer 3366 -centroid 0 -volume 0 -area 0 -colors { BLACK RED YELLOW } -nbcolors 3 -layers { 10 2 254 50 } -nblayers 4
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 4004 -shape 46702 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 4004 -freewire 0 -freeedge 0 -sharededge 19350 -max_solid 0 -max_shell 0 -max_face 4004 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.01077402956 -avg 4.979806751e-006 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
puts "TODO CR23096 ALL: COLORS : Faulty"
-set LinuxDiff 3
set filename Case.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 267 ( 552 ) Summary = 267 ( 552 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 208 ( 208 ) Summary = 2995 ( 2995 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 208 ( 208 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 1276 ( 1276 )
-TOLERANCE : MaxTol = 0.7043468651 ( 0.7043466394 ) AvgTol = 0.006003971975 ( 0.006001251564 )
-LABELS : N0Labels = 1 ( 2 ) N1Labels = 208 ( 208 ) N2Labels = 0 ( 0 ) TotalLabels = 209 ( 210 ) NameLabels = 1 ( 2 ) ColorLabels = 208 ( 209 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 2 )
-COLORS : Colors = DEEPSKYBLUE1 ( DEEPSKYBLUE1 WHITE )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 552 -max_faults 0
+checkxstat D_First -n0 2 -n1 208 -n2 0 -total 210 -withname 2 -withcolor 209 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { DEEPSKYBLUE1 WHITE } -nbcolors 2 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 208 -shape 2995
+checkstatshape res_1 -solid 0 -shell 0 -face 208 -freewire 0 -freeedge 0 -sharededge 1276
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.7043466394 -avg 0.006001251564]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 552 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 268 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 2 -n1 208 -n2 0 -total 210 -withname 2 -withcolor 209 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 2 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 208 -n2 0 -total 209 -withname 1 -withcolor 208 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { DEEPSKYBLUE1 } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 208 -shape 2995 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 208 -freewire 0 -freeedge 0 -sharededge 1276 -max_solid 0 -max_shell 0 -max_face 208 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.7043468651 -avg 0.006003971975 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TOLERANCE : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename Cover.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 13 ) Warnings = 290 ( 688 ) Summary = 290 ( 701 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 200 ( 200 ) Summary = 3064 ( 3072 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 200 ( 200 ) FreeWire = 0 ( 0 ) FreeEdge = 89 ( 89 ) SharedEdge = 1277 ( 1277 )
-TOLERANCE : MaxTol = 4.399371441e-006 ( 1.000227342e-007 ) AvgTol = 8.44425398e-007 ( 1.000018754e-007 )
-LABELS : N0Labels = 22 ( 23 ) N1Labels = 271 ( 279 ) N2Labels = 0 ( 0 ) TotalLabels = 293 ( 302 ) NameLabels = 22 ( 23 ) ColorLabels = 289 ( 290 ) LayerLabels = 89 ( 290 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = RED WHITE ( RED WHITE )
-NLAYERS : NLayers = 3 ( 3 )
-LAYERS : Layers = 10 4 5 ( 10 4 5 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 688 -max_faults 13
+checkxstat D_First -n0 23 -n1 279 -n2 0 -total 302 -withname 23 -withcolor 290 -withlayer 290 -centroid 0 -volume 0 -area 0 -colors { RED WHITE } -nbcolors 2 -layers { 10 4 5 } -nblayers 3
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 200 -shape 3072
+checkstatshape res_1 -solid 0 -shell 0 -face 200 -freewire 0 -freeedge 89 -sharededge 1277
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000227342e-007 -avg 1.000018754e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 688 -max_faults 13
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 290 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 23 -n1 279 -n2 0 -total 302 -withname 23 -withcolor 290 -withlayer 290 -centroid 0 -volume 0 -area 0 -nbcolors 2 -nblayers 3
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 22 -n1 271 -n2 0 -total 293 -withname 22 -withcolor 289 -withlayer 89 -centroid 0 -volume 0 -area 0 -colors { RED WHITE } -nbcolors 2 -layers { 10 4 5 } -nblayers 3
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 200 -shape 3064 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 200 -freewire 0 -freeedge 89 -sharededge 1277 -max_solid 0 -max_shell 0 -max_face 200 -max_freewire 0 -max_freeedge 89
+checkmaxtol res_2 -tol 4.399371441e-006 -avg 8.44425398e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename D44-11325-6a.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 88 ( 191 ) Summary = 88 ( 191 )
-CHECKSHAPE : Wires = 2 ( 2 ) Faces = 2 ( 2 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 569 ( 569 ) Summary = 7842 ( 7833 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 569 ( 569 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 3353 ( 3348 )
-TOLERANCE : MaxTol = 0.7161069967 ( 0.7585238415 ) AvgTol = 0.006717667602 ( 0.006937200018 )
-LABELS : N0Labels = 568 ( 568 ) N1Labels = 2 ( 2 ) N2Labels = 0 ( 0 ) TotalLabels = 570 ( 570 ) NameLabels = 568 ( 568 ) ColorLabels = 569 ( 569 ) LayerLabels = 569 ( 569 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = LIGHTGOLDENROD1 ( LIGHTGOLDENROD1 )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 1 ( 1 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 190 -max_faults 0
+checkxstat D_First -n0 568 -n1 2 -n2 0 -total 570 -withname 568 -withcolor 569 -withlayer 569 -centroid 0 -volume 0 -area 0 -colors { LIGHTGOLDENROD1 } -nbcolors 1 -layers { 1 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 2 -max_faces 2 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 569 -shape 7833
+checkstatshape res_1 -solid 0 -shell 0 -face 569 -freewire 0 -freeedge 0 -sharededge 3348
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.7585238415 -avg 0.006937200018]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 190 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 96 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 568 -n1 2 -n2 0 -total 570 -withname 568 -withcolor 569 -withlayer 569 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 568 -n1 2 -n2 0 -total 570 -withname 568 -withcolor 569 -withlayer 569 -centroid 0 -volume 0 -area 0 -colors { LIGHTGOLDENROD1 } -nbcolors 1 -layers { 1 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 2 -max_faces 2 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 2 -max_faces 2 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 569 -shape 7842 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 569 -freewire 0 -freeedge 0 -sharededge 3353 -max_solid 0 -max_shell 0 -max_face 569 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.7161069967 -avg 0.006717667602 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
puts "TODO CR23096 ALL: COLORS : Faulty"
-set LinuxDiff 1
set filename FRA10072.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 178 ( 440 ) Summary = 178 ( 440 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 304 ( 304 ) Summary = 3791 ( 3791 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 304 ( 304 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 1599 ( 1599 )
-TOLERANCE : MaxTol = 0.4659394289 ( 0.4659394289 ) AvgTol = 0.01079423666 ( 0.01079517963 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 304 ( 1400 ) N2Labels = 0 ( 0 ) TotalLabels = 305 ( 1401 ) NameLabels = 305 ( 429 ) ColorLabels = 304 ( 1400 ) LayerLabels = 304 ( 1400 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 2 ( 3 )
-COLORS : Colors = RED WHITE ( RED WHITE YELLOW )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 200 ( 200 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 454 -max_faults 0
+checkxstat D_First -n0 1 -n1 1400 -n2 0 -total 1401 -withname 429 -withcolor 1400 -withlayer 1400 -centroid 0 -volume 0 -area 0 -colors { RED WHITE YELLOW } -nbcolors 3 -layers { 200 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 304 -shape 3791
+checkstatshape res_1 -solid 0 -shell 0 -face 304 -freewire 0 -freeedge 0 -sharededge 1599
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.4659394289 -avg 0.01079517963]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 454 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 178 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 1400 -n2 0 -total 1401 -withname 429 -withcolor 1400 -withlayer 1400 -centroid 0 -volume 0 -area 0 -nbcolors 3 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 304 -n2 0 -total 305 -withname 305 -withcolor 304 -withlayer 304 -centroid 0 -volume 0 -area 0 -colors { RED WHITE } -nbcolors 2 -layers { 200 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 304 -shape 3791 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 304 -freewire 0 -freeedge 0 -sharededge 1599 -max_solid 0 -max_shell 0 -max_face 304 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.4659394289 -avg 0.01079423666 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: CHECKSHAPE : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
puts "TODO CR23096 ALL: NBSHAPES : Faulty"
-puts "TODO CR23096 ALL: Error : 2 differences with reference data found"
+puts "TODO CR23096 ALL: STATSHAPE : Faulty ref number of shared edges in command statshape"
+puts "TODO CR23096 ALL: Error : is WRONG because number of SHAPE entities in shape"
-set LinuxDiff 1
set filename FRA62468-2.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 253 ( 4993 ) Summary = 253 ( 4993 )
-CHECKSHAPE : Wires = 8 ( 11 ) Faces = 8 ( 7 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 4729 ( 4729 ) Summary = 63158 ( 63146 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 4729 ( 4729 ) FreeWire = 18 ( 18 ) FreeEdge = 452 ( 452 ) SharedEdge = 26798 ( 26797 )
-TOLERANCE : MaxTol = 0.9804479161 ( 0.9805459497 ) AvgTol = 0.01153089031 ( 0.01154870945 )
-LABELS : N0Labels = 5089 ( 5165 ) N1Labels = 26 ( 3688 ) N2Labels = 0 ( 0 ) TotalLabels = 5115 ( 8853 ) NameLabels = 5089 ( 5165 ) ColorLabels = 5086 ( 8777 ) LayerLabels = 5086 ( 8777 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 3 ( 3 )
-COLORS : Colors = BLUE1 CYAN1 GREEN ( BLUE1 CYAN1 GREEN )
-NLAYERS : NLayers = 3 ( 3 )
-LAYERS : Layers = 1 200 51 ( 1 200 51 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 5002 -max_faults 0
+checkxstat D_First -n0 5165 -n1 3688 -n2 0 -total 8853 -withname 5165 -withcolor 8777 -withlayer 8777 -centroid 0 -volume 0 -area 0 -colors { BLUE1 CYAN1 GREEN } -nbcolors 3 -layers { 1 200 51 } -nblayers 3
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 11 -max_faces 7 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 4729 -shape 63146
+checkstatshape res_1 -solid 0 -shell 0 -face 4729 -freewire 18 -freeedge 452 -sharededge 26797
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.9805459497 -avg 0.01154870945]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 5002 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 349 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 5165 -n1 3688 -n2 0 -total 8853 -withname 5165 -withcolor 8777 -withlayer 8777 -centroid 0 -volume 0 -area 0 -nbcolors 3 -nblayers 3
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 5089 -n1 26 -n2 0 -total 5115 -withname 5089 -withcolor 5086 -withlayer 5086 -centroid 0 -volume 0 -area 0 -colors { BLUE1 CYAN1 GREEN } -nbcolors 3 -layers { 1 200 51 } -nblayers 3
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 11 -max_faces 7 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 8 -max_faces 8 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 4729 -shape 63158 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 4729 -freewire 18 -freeedge 452 -sharededge 26798 -max_solid 0 -max_shell 0 -max_face 4729 -max_freewire 18 -max_freeedge 452
+checkmaxtol res_2 -tol 0.9804479161 -avg 0.01153089031 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: NBSHAPES : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
puts "TODO CR23096 ALL: COLORS : Faulty"
-
set filename totale.igs
-set ref_data {
-DATA : Faulties = 0 ( 7 ) Warnings = 0 ( 1 ) Summary = 0 ( 8 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 357 ( 599 ) Summary = 357 ( 599 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 926 ( 926 ) Summary = 11269 ( 11272 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 926 ( 926 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 4708 ( 4710 )
-TOLERANCE : MaxTol = 0.09919926743 ( 0.09919926743 ) AvgTol = 0.002465923979 ( 0.002468707531 )
-LABELS : N0Labels = 926 ( 926 ) N1Labels = 0 ( 638 ) N2Labels = 0 ( 0 ) TotalLabels = 926 ( 1564 ) NameLabels = 926 ( 1035 ) ColorLabels = 926 ( 1564 ) LayerLabels = 19 ( 19 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 2 ( 4 )
-COLORS : Colors = BLUE1 RED ( BLUE1 GREEN RED YELLOW )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 40 ( 40 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 1 -max_faults 7
+checkdoc "tpstat c" -max_warns 603 -max_faults 0
+checkxstat D_First -n0 926 -n1 638 -n2 0 -total 1564 -withname 1035 -withcolor 1564 -withlayer 19 -centroid 0 -volume 0 -area 0 -colors { BLUE1 GREEN RED YELLOW } -nbcolors 4 -layers { 40 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 926 -shape 11272
+checkstatshape res_1 -solid 0 -shell 0 -face 926 -freewire 0 -freeedge 0 -sharededge 4710
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.09919926743 -avg 0.002468707531]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 1 -max_faults 7
+checkdoc "tpstat c" -max_warns 603 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 357 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 926 -n1 638 -n2 0 -total 1564 -withname 1035 -withcolor 1564 -withlayer 19 -centroid 0 -volume 0 -area 0 -nbcolors 4 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 926 -n1 0 -n2 0 -total 926 -withname 926 -withcolor 926 -withlayer 19 -centroid 0 -volume 0 -area 0 -colors { BLUE1 RED } -nbcolors 2 -layers { 40 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 926 -shape 11269 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 926 -freewire 0 -freeedge 0 -sharededge 4708 -max_solid 0 -max_shell 0 -max_face 926 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.09919926743 -avg 0.002465923979 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
puts "TODO CR23096 ALL: COLORS : Faulty"
-
set filename OPEL5.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 7 ) Warnings = 10 ( 139 ) Summary = 10 ( 146 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 28 ( 28 ) Summary = 4089 ( 4089 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 28 ( 28 ) FreeWire = 20 ( 20 ) FreeEdge = 1183 ( 1183 ) SharedEdge = 1433 ( 1433 )
-TOLERANCE : MaxTol = 0.09192532719 ( 0.09192532719 ) AvgTol = 0.0005521202206 ( 0.0005525790618 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 1153 ( 1298 ) N2Labels = 0 ( 0 ) TotalLabels = 1154 ( 1299 ) NameLabels = 1154 ( 1195 ) ColorLabels = 1153 ( 1298 ) LayerLabels = 1153 ( 1298 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 5 ( 6 )
-COLORS : Colors = BLUE1 CYAN1 GOLDENROD2 GREEN YELLOW ( BLUE1 CYAN1 GOLDENROD2 GREEN RED YELLOW )
-NLAYERS : NLayers = 5 ( 5 )
-LAYERS : Layers = 14 3 4 5 7 ( 14 3 4 5 7 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 142 -max_faults 7
+checkxstat D_First -n0 1 -n1 1298 -n2 0 -total 1299 -withname 1195 -withcolor 1298 -withlayer 1298 -centroid 0 -volume 0 -area 0 -colors { BLUE1 CYAN1 GOLDENROD2 GREEN RED YELLOW } -nbcolors 6 -layers { 14 3 4 5 7 } -nblayers 5
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 28 -shape 4089
+checkstatshape res_1 -solid 0 -shell 0 -face 28 -freewire 20 -freeedge 1183 -sharededge 1433
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.09192532719 -avg 0.0005525790618]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 142 -max_faults 7
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 10 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 1298 -n2 0 -total 1299 -withname 1195 -withcolor 1298 -withlayer 1298 -centroid 0 -volume 0 -area 0 -nbcolors 6 -nblayers 5
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 1153 -n2 0 -total 1154 -withname 1154 -withcolor 1153 -withlayer 1153 -centroid 0 -volume 0 -area 0 -colors { BLUE1 CYAN1 GOLDENROD2 GREEN YELLOW } -nbcolors 5 -layers { 14 3 4 5 7 } -nblayers 5
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 28 -shape 4089 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 28 -freewire 20 -freeedge 1183 -sharededge 1433 -max_solid 0 -max_shell 0 -max_face 28 -max_freewire 20 -max_freeedge 1183
+checkmaxtol res_2 -tol 0.09192532719 -avg 0.0005521202206 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
puts "TODO CR23096 ALL: NBSHAPES : Faulty"
puts "TODO CR23096 ALL: TOLERANCE : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
-puts "TODO CR23096 ALL: Error : 3 differences with reference data found"
+puts "TODO CR23096 ALL: CHECKSHAPE : Faulty ref number of wires in command checkshape ff with max possible number"
+puts "TODO CR23096 ALL: Error : is WRONG because number of SHAPE entities in shape"
+puts "TODO CR23096 ALL: STATSHAPE : Faulty ref number of shared edges in command statshape"
set filename PRO10626.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 2 ( 0 ) Warnings = 85 ( 295 ) Summary = 87 ( 295 )
-CHECKSHAPE : Wires = 8 ( 13 ) Faces = 8 ( 13 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 419 ( 419 ) Summary = 5328 ( 5349 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 419 ( 419 ) FreeWire = 4 ( 4 ) FreeEdge = 42 ( 42 ) SharedEdge = 2220 ( 2226 )
-TOLERANCE : MaxTol = 4.547932063 ( 4.543567878 ) AvgTol = 0.03466358537 ( 0.03659099671 )
-LABELS : N0Labels = 457 ( 457 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 457 ( 457 ) NameLabels = 457 ( 457 ) ColorLabels = 451 ( 455 ) LayerLabels = 453 ( 457 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = RED WHITE ( RED WHITE )
-NLAYERS : NLayers = 3 ( 3 )
-LAYERS : Layers = 101 111 254 ( 101 111 254 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 292 -max_faults 0
+checkxstat D_First -n0 457 -n1 0 -n2 0 -total 457 -withname 457 -withcolor 455 -withlayer 457 -centroid 0 -volume 0 -area 0 -colors { RED WHITE } -nbcolors 2 -layers { 101 111 254 } -nblayers 3
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 13 -max_faces 13 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 419 -shape 5349
+checkstatshape res_1 -solid 0 -shell 0 -face 419 -freewire 4 -freeedge 42 -sharededge 2226
+set max_tol_res_1 [checkmaxtol res_1 -tol 4.543567878 -avg 0.03659099671]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 292 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 91 -max_faults 2
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 457 -n1 0 -n2 0 -total 457 -withname 457 -withcolor 455 -withlayer 457 -centroid 0 -volume 0 -area 0 -nbcolors 2 -nblayers 3
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 457 -n1 0 -n2 0 -total 457 -withname 457 -withcolor 451 -withlayer 453 -centroid 0 -volume 0 -area 0 -colors { RED WHITE } -nbcolors 2 -layers { 101 111 254 } -nblayers 3
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 13 -max_faces 13 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 8 -max_faces 8 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 419 -shape 5328 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 419 -freewire 4 -freeedge 42 -sharededge 2220 -max_solid 0 -max_shell 0 -max_face 419 -max_freewire 4 -max_freeedge 42
+checkmaxtol res_2 -tol 4.547932063 -avg 0.03466358537 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename PRO11414-1.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 7 ( 190 ) Summary = 7 ( 190 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 309 ( 309 ) Summary = 14820 ( 14815 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 309 ( 309 ) FreeWire = 22 ( 22 ) FreeEdge = 1789 ( 1789 ) SharedEdge = 6249 ( 6249 )
-TOLERANCE : MaxTol = 0.75178756 ( 0.7517875657 ) AvgTol = 0.001674556495 ( 0.001679070069 )
-LABELS : N0Labels = 2030 ( 2204 ) N1Labels = 8 ( 341 ) N2Labels = 0 ( 0 ) TotalLabels = 2038 ( 2545 ) NameLabels = 2030 ( 2204 ) ColorLabels = 2006 ( 2371 ) LayerLabels = 2006 ( 2371 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 12 ( 12 )
-COLORS : Colors = GRAY61 GREEN LIGHTSALMON2 MAGENTA1 MAGENTA3 RED ROSYBROWN SPRINGGREEN4 TURQUOISE TURQUOISE2 WHITE YELLOW ( GRAY61 GREEN LIGHTSALMON2 MAGENTA1 MAGENTA3 RED ROSYBROWN SPRINGGREEN4 TURQUOISE TURQUOISE2 WHITE YELLOW )
-NLAYERS : NLayers = 5 ( 5 )
-LAYERS : Layers = 107 109 152 155 156 ( 107 109 152 155 156 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 190 -max_faults 0
+checkxstat D_First -n0 2204 -n1 341 -n2 0 -total 2545 -withname 2204 -withcolor 2371 -withlayer 2371 -centroid 0 -volume 0 -area 0 -colors { GRAY61 GREEN LIGHTSALMON2 MAGENTA1 MAGENTA3 RED ROSYBROWN SPRINGGREEN4 TURQUOISE TURQUOISE2 WHITE YELLOW } -nbcolors 12 -layers { 107 109 152 155 156 } -nblayers 5
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 309 -shape 14815
+checkstatshape res_1 -solid 0 -shell 0 -face 309 -freewire 22 -freeedge 1789 -sharededge 6249
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.7517875657 -avg 0.001679070069]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 190 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 11 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 2204 -n1 341 -n2 0 -total 2545 -withname 2204 -withcolor 2371 -withlayer 2371 -centroid 0 -volume 0 -area 0 -nbcolors 12 -nblayers 5
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 2030 -n1 8 -n2 0 -total 2038 -withname 2030 -withcolor 2006 -withlayer 2006 -centroid 0 -volume 0 -area 0 -colors { GRAY61 GREEN LIGHTSALMON2 MAGENTA1 MAGENTA3 RED ROSYBROWN SPRINGGREEN4 TURQUOISE TURQUOISE2 WHITE YELLOW } -nbcolors 12 -layers { 107 109 152 155 156 } -nblayers 5
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 309 -shape 14820 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 309 -freewire 22 -freeedge 1789 -sharededge 6249 -max_solid 0 -max_shell 0 -max_face 309 -max_freewire 22 -max_freeedge 1789
+checkmaxtol res_2 -tol 0.75178756 -avg 0.001674556495 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
puts "TODO CR23096 ALL: TOLERANCE : Faulty"
puts "TODO CR23096 ALL: NBSHAPES : Faulty"
-puts "TODO CR23096 ALL: CHECKSHAPE : Faulty"
-set LinuxDiff 1
set filename PRO14323.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 29 ( 233 ) Summary = 29 ( 233 )
-CHECKSHAPE : Wires = 1 ( 1 ) Faces = 1 ( 1 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 153 ( 153 ) Summary = 3497 ( 3504 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 153 ( 153 ) FreeWire = 21 ( 21 ) FreeEdge = 435 ( 435 ) SharedEdge = 1380 ( 1384 )
-TOLERANCE : MaxTol = 0.9672552763 ( 0.9530871146 ) AvgTol = 0.01866948774 ( 0.01940759381 )
-LABELS : N0Labels = 564 ( 564 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 564 ( 564 ) NameLabels = 564 ( 564 ) ColorLabels = 543 ( 564 ) LayerLabels = 543 ( 564 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = CYAN1 GRAY57 ( CYAN1 GRAY57 )
-NLAYERS : NLayers = 2 ( 2 )
-LAYERS : Layers = 1 25 ( 1 25 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 319 -max_faults 0
+checkxstat D_First -n0 564 -n1 0 -n2 0 -total 564 -withname 564 -withcolor 564 -withlayer 564 -centroid 0 -volume 0 -area 0 -colors { CYAN1 GRAY57 } -nbcolors 2 -layers { 1 25 } -nblayers 2
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 1 -max_faces 1 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 153 -shape 3504
+checkstatshape res_1 -solid 0 -shell 0 -face 153 -freewire 21 -freeedge 435 -sharededge 1384
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.9530871146 -avg 0.01940759381]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 319 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 32 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 564 -n1 0 -n2 0 -total 564 -withname 564 -withcolor 564 -withlayer 564 -centroid 0 -volume 0 -area 0 -nbcolors 2 -nblayers 2
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 564 -n1 0 -n2 0 -total 564 -withname 564 -withcolor 543 -withlayer 543 -centroid 0 -volume 0 -area 0 -colors { CYAN1 GRAY57 } -nbcolors 2 -layers { 1 25 } -nblayers 2
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 1 -max_faces 1 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 1 -max_faces 1 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 153 -shape 3497 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 153 -freewire 21 -freeedge 435 -sharededge 1380 -max_solid 0 -max_shell 0 -max_face 153 -max_freewire 21 -max_freeedge 435
+checkmaxtol res_2 -tol 0.9672552763 -avg 0.01866948774 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: NBSHAPES : Faulty"
puts "TODO CR23096 ALL: TOLERANCE : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
set filename sim6049.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 7 ( 2820 ) Summary = 7 ( 2820 )
-CHECKSHAPE : Wires = 4 ( 6 ) Faces = 4 ( 6 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 3786 ( 3786 ) Summary = 69468 ( 69491 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 3786 ( 3786 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 30984 ( 30999 )
-TOLERANCE : MaxTol = 0.08172710091 ( 0.05040240237 ) AvgTol = 0.0006058177695 ( 0.0006024184165 )
-LABELS : N0Labels = 3785 ( 3785 ) N1Labels = 2 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 3787 ( 3785 ) NameLabels = 3785 ( 3785 ) ColorLabels = 3786 ( 3785 ) LayerLabels = 3786 ( 3785 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 6 ( 6 )
-COLORS : Colors = BLUE1 CYAN1 GREEN MAGENTA1 RED YELLOW ( BLUE1 CYAN1 GREEN MAGENTA1 RED YELLOW )
-NLAYERS : NLayers = 5 ( 5 )
-LAYERS : Layers = 1 100 3 4 5 ( 1 100 3 4 5 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2820 -max_faults 0
+checkxstat D_First -n0 3785 -n1 0 -n2 0 -total 3785 -withname 3785 -withcolor 3785 -withlayer 3785 -centroid 0 -volume 0 -area 0 -colors { BLUE1 CYAN1 GREEN MAGENTA1 RED YELLOW } -nbcolors 6 -layers { 1 100 3 4 5 } -nblayers 5
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 6 -max_faces 6 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 3786 -shape 69491
+checkstatshape res_1 -solid 0 -shell 0 -face 3786 -freewire 0 -freeedge 0 -sharededge 30999
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.05040240237 -avg 0.0006024184165]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2820 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 7 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3785 -n1 0 -n2 0 -total 3785 -withname 3785 -withcolor 3785 -withlayer 3785 -centroid 0 -volume 0 -area 0 -nbcolors 6 -nblayers 5
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3785 -n1 2 -n2 0 -total 3787 -withname 3785 -withcolor 3786 -withlayer 3786 -centroid 0 -volume 0 -area 0 -colors { BLUE1 CYAN1 GREEN MAGENTA1 RED YELLOW } -nbcolors 6 -layers { 1 100 3 4 5 } -nblayers 5
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 6 -max_faces 6 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 4 -max_faces 4 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 3786 -shape 69468 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 3786 -freewire 0 -freeedge 0 -sharededge 30984 -max_solid 0 -max_shell 0 -max_face 3786 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.08172710091 -avg 0.0006058177695 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
puts "TODO CR23096 ALL: COLORS : Faulty"
puts "TODO 0025623 ALL: CHECKSHAPE : Faulty"
-
set filename PRO19800.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 1 ) Summary = 0 ( 1 )
-CHECKSHAPE : Wires = 1 ( 0 ) Faces = 1 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 1 ( 1 ) Summary = 13 ( 11 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 1 ( 1 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 6 ( 5 )
-TOLERANCE : MaxTol = 0.04476902169 ( 0.04476636368 ) AvgTol = 0.02402039477 ( 0.02401933664 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 5 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 6 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 6 ) LayerLabels = 1 ( 6 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 2 )
-COLORS : Colors = WHITE ( CYAN1 WHITE )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 31 ( 31 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+checkxstat D_First -n0 1 -n1 5 -n2 0 -total 6 -withname 1 -withcolor 6 -withlayer 6 -centroid 0 -volume 0 -area 0 -colors { CYAN1 WHITE } -nbcolors 2 -layers { 31 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 1 -shape 11
+checkstatshape res_1 -solid 0 -shell 0 -face 1 -freewire 0 -freeedge 0 -sharededge 5
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.04476636368 -avg 0.02401933664]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 5 -n2 0 -total 6 -withname 1 -withcolor 6 -withlayer 6 -centroid 0 -volume 0 -area 0 -nbcolors 2 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { 31 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 1 -max_faces 1 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 1 -shape 13 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 1 -freewire 0 -freeedge 0 -sharededge 6 -max_solid 0 -max_shell 0 -max_face 1 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.04476902169 -avg 0.02402039477 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
puts "TODO CR23096 ALL: LAYERS : Faulty"
-
set filename Rich.igs
-set ref_data {
-DATA : Faulties = 1 ( 126 ) Warnings = 0 ( 7 ) Summary = 1 ( 133 )
-TPSTAT : Faulties = 2 ( 212 ) Warnings = 6 ( 559 ) Summary = 8 ( 771 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 9 ( 9 ) Summary = 20802 ( 16067 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 9 ( 9 ) FreeWire = 477 ( 477 ) FreeEdge = 9018 ( 9018 ) SharedEdge = 9072 ( 6875 )
-TOLERANCE : MaxTol = 0.002386883227 ( 0.002386886993 ) AvgTol = 1.573805359e-06 ( 1.573804854e-06 )
-LABELS : N0Labels = 2053 ( 2148 ) N1Labels = 381 ( 253 ) N2Labels = 0 ( 0 ) TotalLabels = 2434 ( 2401 ) NameLabels = 2053 ( 2148 ) ColorLabels = 1932 ( 2306 ) LayerLabels = 1559 ( 2306 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 13 ( 13 )
-COLORS : Colors = BLUE1 CYAN1 CYAN3 DARKORANGE2 DEEPPINK4 GREEN GREEN4 LIGHTPINK2 MAGENTA1 MATRAGRAY RED SIENNA3 YELLOW ( BLUE1 CYAN1 CYAN3 DARKORANGE2 DEEPPINK4 GREEN GREEN4 LIGHTPINK2 MAGENTA1 MATRAGRAY RED SIENNA3 YELLOW )
-NLAYERS : NLayers = 21 ( 22 )
-LAYERS : Layers = 501 510 511 512 513 515 550 560 651 700 701 702 703 704 705 706 707 708 801 851 894 ( 1000 501 510 511 512 513 515 550 560 651 700 701 702 703 704 705 706 707 708 801 851 894 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 7 -max_faults 126
+checkdoc "tpstat c" -max_warns 559 -max_faults 212
+checkxstat D_First -n0 2148 -n1 253 -n2 0 -total 2401 -withname 2148 -withcolor 2306 -withlayer 2306 -centroid 0 -volume 0 -area 0 -colors { BLUE1 CYAN1 CYAN3 DARKORANGE2 DEEPPINK4 GREEN GREEN4 LIGHTPINK2 MAGENTA1 MATRAGRAY RED SIENNA3 YELLOW } -nbcolors 13 -layers { 1000 501 510 511 512 513 515 550 560 651 700 701 702 703 704 705 706 707 708 801 851 894 } -nblayers 22
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 9 -shape 16067
+checkstatshape res_1 -solid 0 -shell 0 -face 9 -freewire 477 -freeedge 9018 -sharededge 6875
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.002386886993 -avg 1.573804854e-06]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 7 -max_faults 126
+checkdoc "tpstat c" -max_warns 559 -max_faults 212
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 1
+checkdoc "tpstat c" -max_warns 6 -max_faults 2
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 2148 -n1 253 -n2 0 -total 2401 -withname 2148 -withcolor 2306 -withlayer 2306 -centroid 0 -volume 0 -area 0 -nbcolors 13 -nblayers 22
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 2053 -n1 381 -n2 0 -total 2434 -withname 2053 -withcolor 1932 -withlayer 1559 -centroid 0 -volume 0 -area 0 -colors { BLUE1 CYAN1 CYAN3 DARKORANGE2 DEEPPINK4 GREEN GREEN4 LIGHTPINK2 MAGENTA1 MATRAGRAY RED SIENNA3 YELLOW } -nbcolors 13 -layers { 501 510 511 512 513 515 550 560 651 700 701 702 703 704 705 706 707 708 801 851 894 } -nblayers 21
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 9 -shape 20802 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 9 -freewire 477 -freeedge 9018 -sharededge 9072 -max_solid 0 -max_shell 0 -max_face 9 -max_freewire 477 -max_freeedge 9018
+checkmaxtol res_2 -tol 0.002386883227 -avg 1.573805359e-06 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
puts "TODO CR23096 ALL: LAYERS : Faulty"
-
set filename Disc.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 0 ( 0 ) Summary = 125 ( 126 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 0 ( 0 ) FreeWire = 0 ( 0 ) FreeEdge = 46 ( 46 ) SharedEdge = 46 ( 46 )
-TOLERANCE : MaxTol = 1e-007 ( 1e-007 ) AvgTol = 1e-007 ( 1e-007 )
-LABELS : N0Labels = 1 ( 3 ) N1Labels = 46 ( 47 ) N2Labels = 0 ( 0 ) TotalLabels = 47 ( 50 ) NameLabels = 1 ( 50 ) ColorLabels = 46 ( 46 ) LayerLabels = 0 ( 47 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = WHITE YELLOW ( WHITE YELLOW )
-NLAYERS : NLayers = 0 ( 2 )
-LAYERS : Layers = ( 1 2 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 3 -n1 47 -n2 0 -total 50 -withname 50 -withcolor 46 -withlayer 47 -centroid 0 -volume 0 -area 0 -colors { WHITE YELLOW } -nbcolors 2 -layers { 1 2 } -nblayers 2
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 0 -shape 126
+checkstatshape res_1 -solid 0 -shell 0 -face 0 -freewire 0 -freeedge 46 -sharededge 46
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-007 -avg 1e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3 -n1 47 -n2 0 -total 50 -withname 50 -withcolor 46 -withlayer 47 -centroid 0 -volume 0 -area 0 -nbcolors 2 -nblayers 2
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 46 -n2 0 -total 47 -withname 1 -withcolor 46 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { WHITE YELLOW } -nbcolors 2 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 0 -shape 125 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 0 -freewire 0 -freeedge 46 -sharededge 46 -max_solid 0 -max_shell 0 -max_face 0 -max_freewire 0 -max_freeedge 46
+checkmaxtol res_2 -tol 1e-007 -avg 1e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: DATA : Faulty"
puts "TODO CR23096 ALL: TPSTAT : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename ball_bearing.igs
-set ref_data {
-DATA : Faulties = 2 ( 0 ) Warnings = 0 ( 0 ) Summary = 2 ( 0 )
-TPSTAT : Faulties = 4 ( 0 ) Warnings = 0 ( 3 ) Summary = 4 ( 3 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 15 ( 15 ) Summary = 320 ( 320 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 15 ( 15 ) FreeWire = 1 ( 1 ) FreeEdge = 55 ( 55 ) SharedEdge = 117 ( 117 )
-TOLERANCE : MaxTol = 0.0006252983686 ( 0.0006252359927 ) AvgTol = 2.234812266e-05 ( 1.469671889e-05 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 68 ( 137 ) N2Labels = 0 ( 0 ) TotalLabels = 69 ( 138 ) NameLabels = 69 ( 76 ) ColorLabels = 68 ( 137 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = WHITE ( WHITE )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 3 -max_faults 0
+checkxstat D_First -n0 1 -n1 137 -n2 0 -total 138 -withname 76 -withcolor 137 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 15 -shape 320
+checkstatshape res_1 -solid 0 -shell 0 -face 15 -freewire 1 -freeedge 55 -sharededge 117
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.0006252359927 -avg 1.469671889e-05]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 3 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 2
+checkdoc "tpstat c" -max_warns 0 -max_faults 4
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 137 -n2 0 -total 138 -withname 76 -withcolor 137 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 68 -n2 0 -total 69 -withname 69 -withcolor 68 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 15 -shape 320 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 15 -freewire 1 -freeedge 55 -sharededge 117 -max_solid 0 -max_shell 0 -max_face 15 -max_freewire 1 -max_freeedge 55
+checkmaxtol res_2 -tol 0.0006252983686 -avg 2.234812266e-05 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: DATA : Faulty"
puts "TODO CR23096 ALL: TPSTAT : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
-puts "TODO CR26656 Linux: Error : 1 differences with reference data found"
-
set filename support_rampe.igs
-set ref_data {
-DATA : Faulties = 2 ( 0 ) Warnings = 0 ( 0 ) Summary = 2 ( 0 )
-TPSTAT : Faulties = 4 ( 2 ) Warnings = 0 ( 170 ) Summary = 4 ( 172 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 169 ( 169 ) Summary = 5348 ( 5348 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 169 ( 169 ) FreeWire = 49 ( 49 ) FreeEdge = 945 ( 945 ) SharedEdge = 2041 ( 2041 )
-TOLERANCE : MaxTol = 0.1765497108 ( 0.1765497101 ) AvgTol = 0.0004116969813 ( 0.0004153236787 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 981 ( 2033 ) N2Labels = 0 ( 0 ) TotalLabels = 982 ( 2034 ) NameLabels = 982 ( 1142 ) ColorLabels = 981 ( 2033 ) LayerLabels = 981 ( 2033 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 6 ( 6 )
-COLORS : Colors = BLUE1 CYAN1 GREEN MAGENTA1 WHITE YELLOW ( BLUE1 CYAN1 GREEN MAGENTA1 WHITE YELLOW )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 200 ( 200 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 173 -max_faults 2
+checkxstat D_First -n0 1 -n1 2033 -n2 0 -total 2034 -withname 1142 -withcolor 2033 -withlayer 2033 -centroid 0 -volume 0 -area 0 -colors { BLUE1 CYAN1 GREEN MAGENTA1 WHITE YELLOW } -nbcolors 6 -layers { 200 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 169 -shape 5348
+checkstatshape res_1 -solid 0 -shell 0 -face 169 -freewire 49 -freeedge 945 -sharededge 2041
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.1765497101 -avg 0.0004153236787]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 173 -max_faults 2
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 2
+checkdoc "tpstat c" -max_warns 0 -max_faults 4
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 2033 -n2 0 -total 2034 -withname 1142 -withcolor 2033 -withlayer 2033 -centroid 0 -volume 0 -area 0 -nbcolors 6 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 981 -n2 0 -total 982 -withname 982 -withcolor 981 -withlayer 981 -centroid 0 -volume 0 -area 0 -colors { BLUE1 CYAN1 GREEN MAGENTA1 WHITE YELLOW } -nbcolors 6 -layers { 200 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 169 -shape 5348 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 169 -freewire 49 -freeedge 945 -sharededge 2041 -max_solid 0 -max_shell 0 -max_face 169 -max_freewire 49 -max_freeedge 945
+checkmaxtol res_2 -tol 0.1765497108 -avg 0.0004116969813 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: STATSHAPE : Faulty"
-
set filename UK4.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 1 ) Summary = 0 ( 1 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 128 ( 696 ) Summary = 128 ( 696 )
-CHECKSHAPE : Wires = 0 ( 1 ) Faces = 0 ( 1 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 272 ( 271 ) Summary = 8087 ( 8085 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 272 ( 271 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 3767 ( 3768 )
-TOLERANCE : MaxTol = 0.7291364407 ( 0.7291361907 ) AvgTol = 0.01261526315 ( 0.01261915338 )
-LABELS : N0Labels = 271 ( 271 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 271 ( 271 ) NameLabels = 271 ( 271 ) ColorLabels = 0 ( 0 ) LayerLabels = 271 ( 271 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 1 ( 1 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 695 -max_faults 0
+checkxstat D_First -n0 271 -n1 0 -n2 0 -total 271 -withname 271 -withcolor 0 -withlayer 271 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { 1 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 1 -max_faces 1 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 271 -shape 8085
+checkstatshape res_1 -solid 0 -shell 0 -face 271 -freewire 0 -freeedge 0 -sharededge 3768
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.7291361907 -avg 0.01261915338]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 695 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 136 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 271 -n1 0 -n2 0 -total 271 -withname 271 -withcolor 0 -withlayer 271 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 271 -n1 0 -n2 0 -total 271 -withname 271 -withcolor 0 -withlayer 271 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { 1 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 1 -max_faces 1 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 272 -shape 8087 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 272 -freewire 0 -freeedge 0 -sharededge 3767 -max_solid 0 -max_shell 0 -max_face 271 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.7291364407 -avg 0.01261526315 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename UKI60107-5.igs
-set ref_data {
-DATA : Faulties = 0 ( 12 ) Warnings = 0 ( 0 ) Summary = 0 ( 12 )
-TPSTAT : Faulties = 2 ( 0 ) Warnings = 64 ( 134 ) Summary = 66 ( 134 )
-CHECKSHAPE : Wires = 1 ( 1 ) Faces = 1 ( 1 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 93 ( 93 ) Summary = 16847 ( 16847 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 93 ( 93 ) FreeWire = 2 ( 2 ) FreeEdge = 419 ( 419 ) SharedEdge = 8137 ( 8137 )
-TOLERANCE : MaxTol = 7.725102137e-06 ( 1e-05 ) AvgTol = 2.262722986e-07 ( 9.344523316e-06 )
-LABELS : N0Labels = 513 ( 513 ) N1Labels = 0 ( 15 ) N2Labels = 0 ( 0 ) TotalLabels = 513 ( 528 ) NameLabels = 513 ( 513 ) ColorLabels = 402 ( 422 ) LayerLabels = 508 ( 528 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 5 ( 5 )
-COLORS : Colors = GREEN MAGENTA1 RED WHITE YELLOW ( GREEN MAGENTA1 RED WHITE YELLOW )
-NLAYERS : NLayers = 4 ( 4 )
-LAYERS : Layers = 50 51 7 9 ( 50 51 7 9 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 12
+checkdoc "tpstat c" -max_warns 134 -max_faults 0
+checkxstat D_First -n0 513 -n1 15 -n2 0 -total 528 -withname 513 -withcolor 422 -withlayer 528 -centroid 0 -volume 0 -area 0 -colors { GREEN MAGENTA1 RED WHITE YELLOW } -nbcolors 5 -layers { 50 51 7 9 } -nblayers 4
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 1 -max_faces 1 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 93 -shape 16847
+checkstatshape res_1 -solid 0 -shell 0 -face 93 -freewire 2 -freeedge 419 -sharededge 8137
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-05 -avg 9.344523316e-06]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 12
+checkdoc "tpstat c" -max_warns 134 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 64 -max_faults 2
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 513 -n1 15 -n2 0 -total 528 -withname 513 -withcolor 422 -withlayer 528 -centroid 0 -volume 0 -area 0 -nbcolors 5 -nblayers 4
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 513 -n1 0 -n2 0 -total 513 -withname 513 -withcolor 402 -withlayer 508 -centroid 0 -volume 0 -area 0 -colors { GREEN MAGENTA1 RED WHITE YELLOW } -nbcolors 5 -layers { 50 51 7 9 } -nblayers 4
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 1 -max_faces 1 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 1 -max_faces 1 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 93 -shape 16847 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 93 -freewire 2 -freeedge 419 -sharededge 8137 -max_solid 0 -max_shell 0 -max_face 93 -max_freewire 2 -max_freeedge 419
+checkmaxtol res_2 -tol 7.725102137e-06 -avg 2.262722986e-07 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
puts "TODO CR23096 ALL: COLORS : Faulty"
-
set filename UKI60878.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 4 ) Summary = 0 ( 4 )
-TPSTAT : Faulties = 0 ( 2 ) Warnings = 37 ( 380 ) Summary = 37 ( 382 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 1 ) Face = 136 ( 136 ) Summary = 4613 ( 4610 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 1 ) Face = 136 ( 136 ) FreeWire = 169 ( 169 ) FreeEdge = 1360 ( 1360 ) SharedEdge = 1945 ( 1944 )
-TOLERANCE : MaxTol = 0.8737801249 ( 0.873776131 ) AvgTol = 0.01399299235 ( 0.01399262795 )
-LABELS : N0Labels = 416 ( 416 ) N1Labels = 2 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 418 ( 416 ) NameLabels = 416 ( 416 ) ColorLabels = 247 ( 416 ) LayerLabels = 247 ( 416 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 4 ( 5 )
-COLORS : Colors = CYAN1 GRAY33 GRAY6 YELLOW ( CYAN1 GRAY33 GRAY6 WHITE YELLOW )
-NLAYERS : NLayers = 2 ( 2 )
-LAYERS : Layers = 10 2 ( 10 2 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 4 -max_faults 0
+checkdoc "tpstat c" -max_warns 380 -max_faults 2
+checkxstat D_First -n0 416 -n1 0 -n2 0 -total 416 -withname 416 -withcolor 416 -withlayer 416 -centroid 0 -volume 0 -area 0 -colors { CYAN1 GRAY33 GRAY6 WHITE YELLOW } -nbcolors 5 -layers { 10 2 } -nblayers 2
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 1 -face 136 -shape 4610
+checkstatshape res_1 -solid 0 -shell 1 -face 136 -freewire 169 -freeedge 1360 -sharededge 1944
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.873776131 -avg 0.01399262795]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 4 -max_faults 0
+checkdoc "tpstat c" -max_warns 380 -max_faults 2
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 37 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 416 -n1 0 -n2 0 -total 416 -withname 416 -withcolor 416 -withlayer 416 -centroid 0 -volume 0 -area 0 -nbcolors 5 -nblayers 2
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 416 -n1 2 -n2 0 -total 418 -withname 416 -withcolor 247 -withlayer 247 -centroid 0 -volume 0 -area 0 -colors { CYAN1 GRAY33 GRAY6 YELLOW } -nbcolors 4 -layers { 10 2 } -nblayers 2
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 136 -shape 4613 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 136 -freewire 169 -freeedge 1360 -sharededge 1945 -max_solid 0 -max_shell 1 -max_face 136 -max_freewire 169 -max_freeedge 1360
+checkmaxtol res_2 -tol 0.8737801249 -avg 0.01399299235 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
puts "TODO CR23096 ALL: COLORS : Faulty"
-
set filename UKI60997.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 1 ) Summary = 0 ( 1 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 44 ( 72 ) Summary = 44 ( 72 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 25 ( 25 ) Summary = 279 ( 278 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 25 ( 25 ) FreeWire = 1 ( 1 ) FreeEdge = 3 ( 3 ) SharedEdge = 121 ( 121 )
-TOLERANCE : MaxTol = 0.5931853741 ( 0.5931853741 ) AvgTol = 0.01696817505 ( 0.01696911529 )
-LABELS : N0Labels = 26 ( 26 ) N1Labels = 0 ( 31 ) N2Labels = 0 ( 0 ) TotalLabels = 26 ( 57 ) NameLabels = 26 ( 57 ) ColorLabels = 25 ( 57 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 3 ( 4 )
-COLORS : Colors = ORANGE ORANGERED RED ( GREEN ORANGE ORANGERED RED )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 72 -max_faults 0
+checkxstat D_First -n0 26 -n1 31 -n2 0 -total 57 -withname 57 -withcolor 57 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { GREEN ORANGE ORANGERED RED } -nbcolors 4 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 25 -shape 278
+checkstatshape res_1 -solid 0 -shell 0 -face 25 -freewire 1 -freeedge 3 -sharededge 121
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.5931853741 -avg 0.01696911529]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 72 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 44 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 26 -n1 31 -n2 0 -total 57 -withname 57 -withcolor 57 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 4 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 26 -n1 0 -n2 0 -total 26 -withname 26 -withcolor 25 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { ORANGE ORANGERED RED } -nbcolors 3 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 25 -shape 279 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 25 -freewire 1 -freeedge 3 -sharededge 121 -max_solid 0 -max_shell 0 -max_face 25 -max_freewire 1 -max_freeedge 3
+checkmaxtol res_2 -tol 0.5931853741 -avg 0.01696817505 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TOLERANCE : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename UKI60998.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 1 ) Summary = 0 ( 1 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 11 ) Summary = 0 ( 11 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 11 ( 11 ) Summary = 105 ( 105 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 11 ( 11 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 42 ( 42 )
-TOLERANCE : MaxTol = 1e-005 ( 1.210776757e-007 ) AvgTol = 1.545259562e-006 ( 1.010754665e-007 )
-LABELS : N0Labels = 11 ( 11 ) N1Labels = 0 ( 13 ) N2Labels = 0 ( 0 ) TotalLabels = 11 ( 24 ) NameLabels = 11 ( 24 ) ColorLabels = 11 ( 24 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = ORANGERED ( ORANGERED )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 11 -max_faults 0
+checkxstat D_First -n0 11 -n1 13 -n2 0 -total 24 -withname 24 -withcolor 24 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { ORANGERED } -nbcolors 1 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 11 -shape 105
+checkstatshape res_1 -solid 0 -shell 0 -face 11 -freewire 0 -freeedge 0 -sharededge 42
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.210776757e-007 -avg 1.010754665e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 11 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 11 -n1 13 -n2 0 -total 24 -withname 24 -withcolor 24 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 11 -n1 0 -n2 0 -total 11 -withname 11 -withcolor 11 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { ORANGERED } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 11 -shape 105 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 11 -freewire 0 -freeedge 0 -sharededge 42 -max_solid 0 -max_shell 0 -max_face 11 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1e-005 -avg 1.545259562e-006 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
puts "TODO CR23096 ALL: LAYERS : Faulty"
-
set filename USA60023-1.igs
-set ref_data {
-DATA : Faulties = 0 ( 3 ) Warnings = 0 ( 0 ) Summary = 0 ( 3 )
-TPSTAT : Faulties = 0 ( 90 ) Warnings = 0 ( 67 ) Summary = 0 ( 157 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 0 ( 0 ) Summary = 10500 ( 10502 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 0 ( 0 ) FreeWire = 22 ( 22 ) FreeEdge = 3530 ( 3530 ) SharedEdge = 3530 ( 3530 )
-TOLERANCE : MaxTol = 1e-07 ( 1e-07 ) AvgTol = 1e-07 ( 1e-07 )
-LABELS : N0Labels = 2969 ( 2969 ) N1Labels = 535 ( 419 ) N2Labels = 0 ( 0 ) TotalLabels = 3504 ( 3388 ) NameLabels = 2969 ( 2969 ) ColorLabels = 2305 ( 2287 ) LayerLabels = 3288 ( 3308 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 6 ( 6 )
-COLORS : Colors = BLUE1 CYAN1 GREEN MAGENTA1 RED YELLOW ( BLUE1 CYAN1 GREEN MAGENTA1 RED YELLOW )
-NLAYERS : NLayers = 28 ( 29 )
-LAYERS : Layers = 10 106 107 11 12 13 14 2 20 21 22 24 250 3 30 31 32 4 40 5 52 6 60 61 7 70 72 9 ( 10 106 107 11 12 13 14 199 2 20 21 22 24 250 3 30 31 32 4 40 5 52 6 60 61 7 70 72 9 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 3
+checkdoc "tpstat c" -max_warns 67 -max_faults 90
+checkxstat D_First -n0 2969 -n1 419 -n2 0 -total 3388 -withname 2969 -withcolor 2287 -withlayer 3308 -centroid 0 -volume 0 -area 0 -colors { BLUE1 CYAN1 GREEN MAGENTA1 RED YELLOW } -nbcolors 6 -layers { 10 106 107 11 12 13 14 199 2 20 21 22 24 250 3 30 31 32 4 40 5 52 6 60 61 7 70 72 9 } -nblayers 29
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 0 -shape 10502
+checkstatshape res_1 -solid 0 -shell 0 -face 0 -freewire 22 -freeedge 3530 -sharededge 3530
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-07 -avg 1e-07]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 3
+checkdoc "tpstat c" -max_warns 67 -max_faults 90
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 2969 -n1 419 -n2 0 -total 3388 -withname 2969 -withcolor 2287 -withlayer 3308 -centroid 0 -volume 0 -area 0 -nbcolors 6 -nblayers 29
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 2969 -n1 535 -n2 0 -total 3504 -withname 2969 -withcolor 2305 -withlayer 3288 -centroid 0 -volume 0 -area 0 -colors { BLUE1 CYAN1 GREEN MAGENTA1 RED YELLOW } -nbcolors 6 -layers { 10 106 107 11 12 13 14 2 20 21 22 24 250 3 30 31 32 4 40 5 52 6 60 61 7 70 72 9 } -nblayers 28
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 0 -shape 10500 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 0 -freewire 22 -freeedge 3530 -sharededge 3530 -max_solid 0 -max_shell 0 -max_face 0 -max_freewire 22 -max_freeedge 3530
+checkmaxtol res_2 -tol 1e-07 -avg 1e-07 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
puts "TODO CR23096 ALL: COLORS : Faulty"
-set LinuxDiff 3
-set LinuxFaulties {NBSHAPES}
set filename USA60231.igs
-set ref_data {
-DATA : Faulties = 0 ( 1 ) Warnings = 0 ( 0 ) Summary = 0 ( 1 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 650 ( 1843 ) Summary = 650 ( 1843 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 692 ( 692 ) Summary = 17131 ( 17126 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 692 ( 692 ) FreeWire = 5 ( 5 ) FreeEdge = 36 ( 36 ) SharedEdge = 7867 ( 7867 )
-TOLERANCE : MaxTol = 1.089725986e-005 ( 1.089659651e-005 ) AvgTol = 1.975835144e-006 ( 9.652818162e-006 )
-LABELS : N0Labels = 693 ( 693 ) N1Labels = 10 ( 1399 ) N2Labels = 0 ( 0 ) TotalLabels = 703 ( 2092 ) NameLabels = 693 ( 1341 ) ColorLabels = 692 ( 2092 ) LayerLabels = 692 ( 2092 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 3 ( 4 )
-COLORS : Colors = CYAN1 WHITE YELLOW ( CYAN1 GREEN3 WHITE YELLOW )
-NLAYERS : NLayers = 2 ( 2 )
-LAYERS : Layers = 10 3 ( 10 3 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 1
+checkdoc "tpstat c" -max_warns 1843 -max_faults 0
+checkxstat D_First -n0 693 -n1 1399 -n2 0 -total 2092 -withname 1341 -withcolor 2092 -withlayer 2092 -centroid 0 -volume 0 -area 0 -colors { CYAN1 GREEN3 WHITE YELLOW } -nbcolors 4 -layers { 10 3 } -nblayers 2
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 692 -shape 17126
+checkstatshape res_1 -solid 0 -shell 0 -face 692 -freewire 5 -freeedge 36 -sharededge 7867
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.089659651e-005 -avg 9.652818162e-006]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 1
+checkdoc "tpstat c" -max_warns 1843 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 650 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 693 -n1 1399 -n2 0 -total 2092 -withname 1341 -withcolor 2092 -withlayer 2092 -centroid 0 -volume 0 -area 0 -nbcolors 4 -nblayers 2
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 693 -n1 10 -n2 0 -total 703 -withname 693 -withcolor 692 -withlayer 692 -centroid 0 -volume 0 -area 0 -colors { CYAN1 WHITE YELLOW } -nbcolors 3 -layers { 10 3 } -nblayers 2
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 692 -shape 17131 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 692 -freewire 5 -freeedge 36 -sharededge 7867 -max_solid 0 -max_shell 0 -max_face 692 -max_freewire 5 -max_freeedge 36
+checkmaxtol res_2 -tol 1.089725986e-005 -avg 1.975835144e-006 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TOLERANCE : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
-puts "TODO CR25013 ALL: Error : 2 differences with reference data found"
-
+puts "TODO CR25013 ALL: Error : is WRONG because number of SHAPE entities in shape"
+puts "TODO CR25013 ALL: STATSHAPE : Faulty ref number of shared edges in command statshape"
set filename bmarkmdl.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 121 ( 4199 ) Summary = 121 ( 4199 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 440 ( 440 ) Summary = 9077 ( 9077 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 440 ( 440 ) FreeWire = 20 ( 20 ) FreeEdge = 220 ( 220 ) SharedEdge = 4083 ( 4083 )
-TOLERANCE : MaxTol = 0.07954526757 ( 0.04419037521 ) AvgTol = 0.0008428584881 ( 0.0007103047948 )
-LABELS : N0Labels = 47 ( 47 ) N1Labels = 426 ( 426 ) N2Labels = 0 ( 0 ) TotalLabels = 473 ( 473 ) NameLabels = 473 ( 473 ) ColorLabels = 439 ( 439 ) LayerLabels = 452 ( 472 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 5 ( 5 )
-COLORS : Colors = BLUE1 GREEN RED WHITE YELLOW ( BLUE1 GREEN RED WHITE YELLOW )
-NLAYERS : NLayers = 5 ( 5 )
-LAYERS : Layers = 1 12 2 3 6 ( 1 12 2 3 6 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4244 -max_faults 0
+checkxstat D_First -n0 47 -n1 426 -n2 0 -total 473 -withname 473 -withcolor 439 -withlayer 472 -centroid 0 -volume 0 -area 0 -colors { BLUE1 GREEN RED WHITE YELLOW } -nbcolors 5 -layers { 1 12 2 3 6 } -nblayers 5
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 440 -shape 9077
+checkstatshape res_1 -solid 0 -shell 0 -face 440 -freewire 20 -freeedge 220 -sharededge 4083
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.04419037521 -avg 0.0007103047948]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4244 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 127 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 47 -n1 426 -n2 0 -total 473 -withname 473 -withcolor 439 -withlayer 472 -centroid 0 -volume 0 -area 0 -nbcolors 5 -nblayers 5
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 47 -n1 426 -n2 0 -total 473 -withname 473 -withcolor 439 -withlayer 452 -centroid 0 -volume 0 -area 0 -colors { BLUE1 GREEN RED WHITE YELLOW } -nbcolors 5 -layers { 1 12 2 3 6 } -nblayers 5
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 440 -shape 9077 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 440 -freewire 20 -freeedge 220 -sharededge 4083 -max_solid 0 -max_shell 0 -max_face 440 -max_freewire 20 -max_freeedge 220
+checkmaxtol res_2 -tol 0.07954526757 -avg 0.0008428584881 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename carenage.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 2 ) Warnings = 0 ( 48 ) Summary = 0 ( 50 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 12 ( 6 ) Summary = 743 ( 624 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 12 ( 12 ) FreeWire = 40 ( 40 ) FreeEdge = 188 ( 188 ) SharedEdge = 296 ( 242 )
-TOLERANCE : MaxTol = 0.2600681266 ( 7.241630725 ) AvgTol = 0.03297721346 ( 0.4073375928 )
-LABELS : N0Labels = 7 ( 7 ) N1Labels = 44 ( 90 ) N2Labels = 0 ( 0 ) TotalLabels = 51 ( 97 ) NameLabels = 51 ( 97 ) ColorLabels = 50 ( 96 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = RED WHITE ( RED WHITE )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 20 -max_faults 0
+checkdoc "tpstat c" -max_warns 50 -max_faults 2
+checkxstat D_First -n0 7 -n1 90 -n2 0 -total 97 -withname 97 -withcolor 96 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { RED WHITE } -nbcolors 2 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 6 -shape 624
+checkstatshape res_1 -solid 0 -shell 0 -face 12 -freewire 40 -freeedge 188 -sharededge 242
+set max_tol_res_1 [checkmaxtol res_1 -tol 7.241630725 -avg 0.4073375928]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 20 -max_faults 0
+checkdoc "tpstat c" -max_warns 50 -max_faults 2
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 7 -n1 90 -n2 0 -total 97 -withname 97 -withcolor 96 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 2 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 7 -n1 44 -n2 0 -total 51 -withname 51 -withcolor 50 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { RED WHITE } -nbcolors 2 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 12 -shape 743 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 12 -freewire 40 -freeedge 188 -sharededge 296 -max_solid 0 -max_shell 0 -max_face 12 -max_freewire 40 -max_freeedge 188
+checkmaxtol res_2 -tol 0.2600681266 -avg 0.03297721346 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
puts "TODO CR23096 ALL: LAYERS : Faulty"
-
set filename ctadtrim.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 32 ( 2370 ) Summary = 32 ( 2370 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 27 ( 27 ) Summary = 3490 ( 3490 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 27 ( 27 ) FreeWire = 99 ( 99 ) FreeEdge = 997 ( 997 ) SharedEdge = 1585 ( 1585 )
-TOLERANCE : MaxTol = 0.5378466765 ( 0.5378466739 ) AvgTol = 0.002037884253 ( 0.002048016175 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 72 ( 171 ) N2Labels = 0 ( 0 ) TotalLabels = 73 ( 172 ) NameLabels = 73 ( 172 ) ColorLabels = 72 ( 171 ) LayerLabels = 72 ( 171 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 3 ( 3 )
-COLORS : Colors = GREEN RED YELLOW ( GREEN RED YELLOW )
-NLAYERS : NLayers = 29 ( 32 )
-LAYERS : Layers = 1 102 103 104 105 106 107 108 109 12 13 14 16 18 19 20 21 22 23 24 4 42 43 7 72 73 74 75 76 ( 1 102 103 104 105 106 107 108 109 12 13 14 15 16 17 18 19 20 21 22 23 24 4 42 43 7 72 73 74 75 76 77 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2377 -max_faults 0
+checkxstat D_First -n0 1 -n1 171 -n2 0 -total 172 -withname 172 -withcolor 171 -withlayer 171 -centroid 0 -volume 0 -area 0 -colors { GREEN RED YELLOW } -nbcolors 3 -layers { 1 102 103 104 105 106 107 108 109 12 13 14 15 16 17 18 19 20 21 22 23 24 4 42 43 7 72 73 74 75 76 77 } -nblayers 32
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 27 -shape 3490
+checkstatshape res_1 -solid 0 -shell 0 -face 27 -freewire 99 -freeedge 997 -sharededge 1585
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.5378466739 -avg 0.002048016175]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2377 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 32 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 171 -n2 0 -total 172 -withname 172 -withcolor 171 -withlayer 171 -centroid 0 -volume 0 -area 0 -nbcolors 3 -nblayers 32
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 72 -n2 0 -total 73 -withname 73 -withcolor 72 -withlayer 72 -centroid 0 -volume 0 -area 0 -colors { GREEN RED YELLOW } -nbcolors 3 -layers { 1 102 103 104 105 106 107 108 109 12 13 14 16 18 19 20 21 22 23 24 4 42 43 7 72 73 74 75 76 } -nblayers 29
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 27 -shape 3490 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 27 -freewire 99 -freeedge 997 -sharededge 1585 -max_solid 0 -max_shell 0 -max_face 27 -max_freewire 99 -max_freeedge 997
+checkmaxtol res_2 -tol 0.5378466765 -avg 0.002037884253 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
puts "TODO CR23096 ALL: COLORS : Faulty"
-puts "TODO CR25013 ALL: Error : 1 differences with reference data found"
-
+puts "TODO CR25013 ALL: Error: Avg tolerance of res_"
set filename cts17801.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 4 ( 374 ) Summary = 4 ( 374 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 208 ( 208 ) Summary = 2504 ( 2504 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 208 ( 208 ) FreeWire = 0 ( 0 ) FreeEdge = 6 ( 6 ) SharedEdge = 1038 ( 1038 )
-TOLERANCE : MaxTol = 0.08198937243 ( 0.08606507237 ) AvgTol = 0.003492787826 ( 0.004037916818 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 214 ( 912 ) N2Labels = 0 ( 0 ) TotalLabels = 215 ( 913 ) NameLabels = 215 ( 311 ) ColorLabels = 214 ( 912 ) LayerLabels = 214 ( 912 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 4 ( 5 )
-COLORS : Colors = BLUE1 GRAY73 WHITE YELLOW ( BLUE1 GRAY73 GREEN WHITE YELLOW )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 2 ( 2 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 419 -max_faults 0
+checkxstat D_First -n0 1 -n1 912 -n2 0 -total 913 -withname 311 -withcolor 912 -withlayer 912 -centroid 0 -volume 0 -area 0 -colors { BLUE1 GRAY73 GREEN WHITE YELLOW } -nbcolors 5 -layers { 2 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 208 -shape 2504
+checkstatshape res_1 -solid 0 -shell 0 -face 208 -freewire 0 -freeedge 6 -sharededge 1038
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.08606507237 -avg 0.004037916818]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 419 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 8 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 912 -n2 0 -total 913 -withname 311 -withcolor 912 -withlayer 912 -centroid 0 -volume 0 -area 0 -nbcolors 5 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 214 -n2 0 -total 215 -withname 215 -withcolor 214 -withlayer 214 -centroid 0 -volume 0 -area 0 -colors { BLUE1 GRAY73 WHITE YELLOW } -nbcolors 4 -layers { 2 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 208 -shape 2504 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 208 -freewire 0 -freeedge 6 -sharededge 1038 -max_solid 0 -max_shell 0 -max_face 208 -max_freewire 0 -max_freeedge 6
+checkmaxtol res_2 -tol 0.08198937243 -avg 0.003492787826 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
puts "TODO CR23096 ALL: COLORS : Faulty"
-set LinuxDiff 1
set filename igsBF5.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 1 ) Summary = 0 ( 1 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 17 ( 247 ) Summary = 17 ( 247 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 47 ( 47 ) Summary = 1536 ( 1536 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 47 ( 47 ) FreeWire = 1 ( 1 ) FreeEdge = 2 ( 2 ) SharedEdge = 719 ( 719 )
-TOLERANCE : MaxTol = 0.4901518209 ( 0.4901518209 ) AvgTol = 0.01740968658 ( 0.01741670629 )
-LABELS : N0Labels = 48 ( 48 ) N1Labels = 0 ( 284 ) N2Labels = 0 ( 0 ) TotalLabels = 48 ( 332 ) NameLabels = 48 ( 77 ) ColorLabels = 47 ( 332 ) LayerLabels = 47 ( 332 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 2 )
-COLORS : Colors = MAGENTA1 ( MAGENTA1 YELLOW )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 2 ( 2 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 249 -max_faults 0
+checkxstat D_First -n0 48 -n1 284 -n2 0 -total 332 -withname 77 -withcolor 332 -withlayer 332 -centroid 0 -volume 0 -area 0 -colors { MAGENTA1 YELLOW } -nbcolors 2 -layers { 2 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 47 -shape 1536
+checkstatshape res_1 -solid 0 -shell 0 -face 47 -freewire 1 -freeedge 2 -sharededge 719
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.4901518209 -avg 0.01741670629]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 249 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 17 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 48 -n1 284 -n2 0 -total 332 -withname 77 -withcolor 332 -withlayer 332 -centroid 0 -volume 0 -area 0 -nbcolors 2 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 48 -n1 0 -n2 0 -total 48 -withname 48 -withcolor 47 -withlayer 47 -centroid 0 -volume 0 -area 0 -colors { MAGENTA1 } -nbcolors 1 -layers { 2 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 47 -shape 1536 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 47 -freewire 1 -freeedge 2 -sharededge 719 -max_solid 0 -max_shell 0 -max_face 47 -max_freewire 1 -max_freeedge 2
+checkmaxtol res_2 -tol 0.4901518209 -avg 0.01740968658 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
puts "TODO CR23096 ALL: COLORS : Faulty"
-
set filename ims007.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 1 ) Summary = 0 ( 1 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 1381 ( 3523 ) Summary = 1381 ( 3523 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 1193 ( 1193 ) Summary = 33427 ( 33404 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 1193 ( 1193 ) FreeWire = 614 ( 614 ) FreeEdge = 4178 ( 4178 ) SharedEdge = 12915 ( 12915 )
-TOLERANCE : MaxTol = 0.9901746983 ( 0.9902737158 ) AvgTol = 0.009634592427 ( 0.009635093954 )
-LABELS : N0Labels = 6194 ( 6194 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 6194 ( 6194 ) NameLabels = 6194 ( 6194 ) ColorLabels = 0 ( 1 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 1 )
-COLORS : Colors = ( YELLOW )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 3541 -max_faults 0
+checkxstat D_First -n0 6194 -n1 0 -n2 0 -total 6194 -withname 6194 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { YELLOW } -nbcolors 1 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 1193 -shape 33404
+checkstatshape res_1 -solid 0 -shell 0 -face 1193 -freewire 614 -freeedge 4178 -sharededge 12915
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.9902737158 -avg 0.009635093954]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 3541 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1381 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 6194 -n1 0 -n2 0 -total 6194 -withname 6194 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 6194 -n1 0 -n2 0 -total 6194 -withname 6194 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 1193 -shape 33427 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 1193 -freewire 614 -freeedge 4178 -sharededge 12915 -max_solid 0 -max_shell 0 -max_face 1193 -max_freewire 614 -max_freeedge 4178
+checkmaxtol res_2 -tol 0.9901746983 -avg 0.009634592427 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
-set LinuxDiff 1
set filename ims010.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 15 ( 524 ) Summary = 15 ( 524 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 1177 ( 1177 ) Summary = 18232 ( 18230 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 1177 ( 1177 ) FreeWire = 5 ( 5 ) FreeEdge = 714 ( 714 ) SharedEdge = 7614 ( 7614 )
-TOLERANCE : MaxTol = 0.8261873294 ( 0.8261873283 ) AvgTol = 0.01075755448 ( 0.01076339213 )
-LABELS : N0Labels = 1884 ( 1885 ) N1Labels = 0 ( 986 ) N2Labels = 0 ( 0 ) TotalLabels = 1884 ( 2871 ) NameLabels = 1884 ( 1885 ) ColorLabels = 1873 ( 2870 ) LayerLabels = 1873 ( 2870 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 7 ( 7 )
-COLORS : Colors = BLACK BLUE1 CYAN1 GREEN RED WHITE YELLOW ( BLACK BLUE1 CYAN1 GREEN RED WHITE YELLOW )
-NLAYERS : NLayers = 28 ( 28 )
-LAYERS : Layers = 1 101 103 104 107 108 114 12 121 122 124 125 126 127 128 13 14 15 2 20 3 30 31 33 48 49 50 51 ( 1 101 103 104 107 108 114 12 121 122 124 125 126 127 128 13 14 15 2 20 3 30 31 33 48 49 50 51 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 524 -max_faults 0
+checkxstat D_First -n0 1885 -n1 986 -n2 0 -total 2871 -withname 1885 -withcolor 2870 -withlayer 2870 -centroid 0 -volume 0 -area 0 -colors { BLACK BLUE1 CYAN1 GREEN RED WHITE YELLOW } -nbcolors 7 -layers { 1 101 103 104 107 108 114 12 121 122 124 125 126 127 128 13 14 15 2 20 3 30 31 33 48 49 50 51 } -nblayers 28
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 1177 -shape 18230
+checkstatshape res_1 -solid 0 -shell 0 -face 1177 -freewire 5 -freeedge 714 -sharededge 7614
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.8261873283 -avg 0.01076339213]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 524 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 13 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1885 -n1 986 -n2 0 -total 2871 -withname 1885 -withcolor 2870 -withlayer 2870 -centroid 0 -volume 0 -area 0 -nbcolors 7 -nblayers 28
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1884 -n1 0 -n2 0 -total 1884 -withname 1884 -withcolor 1873 -withlayer 1873 -centroid 0 -volume 0 -area 0 -colors { BLACK BLUE1 CYAN1 GREEN RED WHITE YELLOW } -nbcolors 7 -layers { 1 101 103 104 107 108 114 12 121 122 124 125 126 127 128 13 14 15 2 20 3 30 31 33 48 49 50 51 } -nblayers 28
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 1177 -shape 18232 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 1177 -freewire 5 -freeedge 714 -sharededge 7614 -max_solid 0 -max_shell 0 -max_face 1177 -max_freewire 5 -max_freeedge 714
+checkmaxtol res_2 -tol 0.8261873294 -avg 0.01075755448 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR22923 ALL: NBSHAPES : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
puts "TODO CR23096 ALL: COLORS : Faulty"
puts "TODO CR23096 ALL: LAYERS : Faulty"
-
set filename 1stdraw.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 72 ( 1085 ) Summary = 72 ( 1085 )
-CHECKSHAPE : Wires = 0 ( 1 ) Faces = 1 ( 1 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 1628 ( 1628 ) Summary = 21878 ( 21886 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 1628 ( 1628 ) FreeWire = 16 ( 17 ) FreeEdge = 625 ( 625 ) SharedEdge = 9294 ( 9298 )
-TOLERANCE : MaxTol = 0.9993613167 ( 0.9993613167 ) AvgTol = 0.01637966588 ( 0.01644116474 )
-LABELS : N0Labels = 3 ( 3 ) N1Labels = 1632 ( 3592 ) N2Labels = 0 ( 0 ) TotalLabels = 1635 ( 3595 ) NameLabels = 1635 ( 2037 ) ColorLabels = 1632 ( 3594 ) LayerLabels = 1632 ( 3594 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 3 ( 4 )
-COLORS : Colors = BLUE1 GREEN MAGENTA1 ( BLUE1 GREEN MAGENTA1 RED )
-NLAYERS : NLayers = 6 ( 7 )
-LAYERS : Layers = 1 10 15 18 20 30 ( 1 10 13 15 18 20 30 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1081 -max_faults 0
+checkxstat D_First -n0 3 -n1 3592 -n2 0 -total 3595 -withname 2037 -withcolor 3594 -withlayer 3594 -centroid 0 -volume 0 -area 0 -colors { BLUE1 GREEN MAGENTA1 RED } -nbcolors 4 -layers { 1 10 13 15 18 20 30 } -nblayers 7
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 1 -max_faces 1 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 1628 -shape 21886
+checkstatshape res_1 -solid 0 -shell 0 -face 1628 -freewire 17 -freeedge 625 -sharededge 9298
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.9993613167 -avg 0.01644116474]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1081 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 72 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3 -n1 3592 -n2 0 -total 3595 -withname 2037 -withcolor 3594 -withlayer 3594 -centroid 0 -volume 0 -area 0 -nbcolors 4 -nblayers 7
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 1632 -n2 0 -total 1635 -withname 1635 -withcolor 1632 -withlayer 1632 -centroid 0 -volume 0 -area 0 -colors { BLUE1 GREEN MAGENTA1 } -nbcolors 3 -layers { 1 10 15 18 20 30 } -nblayers 6
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 1 -max_faces 1 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 1 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 1628 -shape 21878 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 1628 -freewire 16 -freeedge 625 -sharededge 9294 -max_solid 0 -max_shell 0 -max_face 1628 -max_freewire 17 -max_freeedge 625
+checkmaxtol res_2 -tol 0.9993613167 -avg 0.01637966588 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: NBSHAPES : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
puts "TODO CR23096 ALL: COLORS : Faulty"
puts "TODO CR23096 ALL: LAYERS : Faulty"
-
set filename BUC40135.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 37 ( 552 ) Summary = 37 ( 552 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 105 ( 105 ) Summary = 4420 ( 4546 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 105 ( 105 ) FreeWire = 138 ( 262 ) FreeEdge = 899 ( 899 ) SharedEdge = 1755 ( 1756 )
-TOLERANCE : MaxTol = 0.7848432514 ( 0.7848432514 ) AvgTol = 0.01536876498 ( 0.01704046179 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 530 ( 1068 ) N2Labels = 0 ( 0 ) TotalLabels = 531 ( 1069 ) NameLabels = 531 ( 738 ) ColorLabels = 530 ( 1068 ) LayerLabels = 494 ( 1010 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 6 ( 7 )
-COLORS : Colors = BLUE1 CYAN1 GREEN MAGENTA1 WHITE YELLOW ( BLUE1 CYAN1 GREEN MAGENTA1 RED WHITE YELLOW )
-NLAYERS : NLayers = 11 ( 12 )
-LAYERS : Layers = 10 110 111 121 131 2 3 5 51 7 9 ( 10 110 111 121 131 2 3 5 51 6 7 9 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 556 -max_faults 0
+checkxstat D_First -n0 1 -n1 1068 -n2 0 -total 1069 -withname 738 -withcolor 1068 -withlayer 1010 -centroid 0 -volume 0 -area 0 -colors { BLUE1 CYAN1 GREEN MAGENTA1 RED WHITE YELLOW } -nbcolors 7 -layers { 10 110 111 121 131 2 3 5 51 6 7 9 } -nblayers 12
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 105 -shape 4546
+checkstatshape res_1 -solid 0 -shell 0 -face 105 -freewire 262 -freeedge 899 -sharededge 1756
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.7848432514 -avg 0.01704046179]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 556 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 37 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 1068 -n2 0 -total 1069 -withname 738 -withcolor 1068 -withlayer 1010 -centroid 0 -volume 0 -area 0 -nbcolors 7 -nblayers 12
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 530 -n2 0 -total 531 -withname 531 -withcolor 530 -withlayer 494 -centroid 0 -volume 0 -area 0 -colors { BLUE1 CYAN1 GREEN MAGENTA1 WHITE YELLOW } -nbcolors 6 -layers { 10 110 111 121 131 2 3 5 51 7 9 } -nblayers 11
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 105 -shape 4420 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 105 -freewire 138 -freeedge 899 -sharededge 1755 -max_solid 0 -max_shell 0 -max_face 105 -max_freewire 262 -max_freeedge 899
+checkmaxtol res_2 -tol 0.7848432514 -avg 0.01536876498 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR25923 ALL: TPSTAT : Faulty"
puts "TODO CR23096 ALL: CHECKSHAPE : Faulty"
puts "TODO CR23096 ALL: STATSHAPE : Faulty"
-
set filename modelinf.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 2 ( 5 ) Summary = 2 ( 5 )
-CHECKSHAPE : Wires = 1 ( 0 ) Faces = 1 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 1480 ( 1479 ) Summary = 18285 ( 18278 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 1480 ( 1479 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 7706 ( 7703 )
-TOLERANCE : MaxTol = 0.9794963919 ( 0.9794963919 ) AvgTol = 0.04036580167 ( 0.04037199234 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 7 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 1479 -shape 18278
+checkstatshape res_1 -solid 0 -shell 0 -face 1479 -freewire 0 -freeedge 0 -sharededge 7703
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.9794963919 -avg 0.04037199234]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 7 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 8 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 1 -max_faces 1 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 1480 -shape 18285 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 1480 -freewire 0 -freeedge 0 -sharededge 7706 -max_solid 0 -max_shell 0 -max_face 1479 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.9794963919 -avg 0.04036580167 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: DATA : Faulty"
puts "TODO CR23096 ALL: TPSTAT : Faulty"
puts "TODO CR23096 ALL: NBSHAPES : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
puts "TODO CR23096 ALL: LAYERS : Faulty"
-
set filename BUC50029.igs
-set ref_data {
-DATA : Faulties = 22 ( 0 ) Warnings = 0 ( 0 ) Summary = 22 ( 0 )
-TPSTAT : Faulties = 44 ( 0 ) Warnings = 169 ( 1291 ) Summary = 213 ( 1291 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 1 ( 1 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 270 ( 270 ) Summary = 8171 ( 8283 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 270 ( 270 ) FreeWire = 108 ( 108 ) FreeEdge = 606 ( 606 ) SharedEdge = 3685 ( 3689 )
-TOLERANCE : MaxTol = 2.113937626e+17 ( 2.113937968e+17 ) AvgTol = 9.737589861e+13 ( 9.762248147e+13 )
-LABELS : N0Labels = 7 ( 7 ) N1Labels = 450 ( 2042 ) N2Labels = 0 ( 0 ) TotalLabels = 457 ( 2049 ) NameLabels = 457 ( 698 ) ColorLabels = 450 ( 2043 ) LayerLabels = 449 ( 2042 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 7 ( 7 )
-COLORS : Colors = BLUE1 GREEN MAGENTA1 RED RED3 WHITE YELLOW ( BLUE1 GREEN MAGENTA1 RED RED3 WHITE YELLOW )
-NLAYERS : NLayers = 27 ( 29 )
-LAYERS : Layers = 10 11 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 180 4 5 6 7 8 ( 1 10 11 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 4 5 6 7 8 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1296 -max_faults 0
+checkxstat D_First -n0 7 -n1 2042 -n2 0 -total 2049 -withname 698 -withcolor 2043 -withlayer 2042 -centroid 0 -volume 0 -area 0 -colors { BLUE1 GREEN MAGENTA1 RED RED3 WHITE YELLOW } -nbcolors 7 -layers { 1 10 11 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 4 5 6 7 8 } -nblayers 29
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 1 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 270 -shape 8283
+checkstatshape res_1 -solid 0 -shell 0 -face 270 -freewire 108 -freeedge 606 -sharededge 3689
+set max_tol_res_1 [checkmaxtol res_1 -tol 2.113937968e+17 -avg 9.762248147e+13]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1296 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 22
+checkdoc "tpstat c" -max_warns 405 -max_faults 44
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 7 -n1 2042 -n2 0 -total 2049 -withname 698 -withcolor 2043 -withlayer 2042 -centroid 0 -volume 0 -area 0 -nbcolors 7 -nblayers 29
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 7 -n1 450 -n2 0 -total 457 -withname 457 -withcolor 450 -withlayer 449 -centroid 0 -volume 0 -area 0 -colors { BLUE1 GREEN MAGENTA1 RED RED3 WHITE YELLOW } -nbcolors 7 -layers { 10 11 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 180 4 5 6 7 8 } -nblayers 27
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 1 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 1 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 270 -shape 8171 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 270 -freewire 108 -freeedge 606 -sharededge 3685 -max_solid 0 -max_shell 0 -max_face 270 -max_freewire 108 -max_freeedge 606
+checkmaxtol res_2 -tol 2.113937626e+17 -avg 9.737589861e+13 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: NBSHAPES : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
puts "TODO CR23096 ALL: COLORS : Faulty"
puts "TODO CR23096 ALL: LAYERS : Faulty"
-
set filename BUC60192.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 369 ) Warnings = 22 ( 979 ) Summary = 22 ( 1348 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 73 ( 73 ) Summary = 13303 ( 13312 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 73 ( 73 ) FreeWire = 409 ( 414 ) FreeEdge = 4891 ( 4891 ) SharedEdge = 5892 ( 5893 )
-TOLERANCE : MaxTol = 0.6679845366 ( 0.6679845366 ) AvgTol = 0.004666698119 ( 0.004573791805 )
-LABELS : N0Labels = 4 ( 7 ) N1Labels = 804 ( 1805 ) N2Labels = 0 ( 0 ) TotalLabels = 808 ( 1812 ) NameLabels = 744 ( 1292 ) ColorLabels = 804 ( 1802 ) LayerLabels = 208 ( 884 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 6 ( 7 )
-COLORS : Colors = CYAN1 GREEN MAGENTA1 MAGENTA4 RED WHITE ( BLUE1 CYAN1 GREEN MAGENTA1 MAGENTA4 RED WHITE )
-NLAYERS : NLayers = 6 ( 10 )
-LAYERS : Layers = 200 214 240 4 51 7 ( 192 200 214 221 239 240 255 4 51 7 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 983 -max_faults 369
+checkxstat D_First -n0 7 -n1 1805 -n2 0 -total 1812 -withname 1292 -withcolor 1802 -withlayer 884 -centroid 0 -volume 0 -area 0 -colors { BLUE1 CYAN1 GREEN MAGENTA1 MAGENTA4 RED WHITE } -nbcolors 7 -layers { 192 200 214 221 239 240 255 4 51 7 } -nblayers 10
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 73 -shape 13312
+checkstatshape res_1 -solid 0 -shell 0 -face 73 -freewire 414 -freeedge 4891 -sharededge 5893
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.6679845366 -avg 0.004573791805]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 983 -max_faults 369
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 24 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 7 -n1 1805 -n2 0 -total 1812 -withname 1292 -withcolor 1802 -withlayer 884 -centroid 0 -volume 0 -area 0 -nbcolors 7 -nblayers 10
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 4 -n1 804 -n2 0 -total 808 -withname 744 -withcolor 804 -withlayer 208 -centroid 0 -volume 0 -area 0 -colors { CYAN1 GREEN MAGENTA1 MAGENTA4 RED WHITE } -nbcolors 6 -layers { 200 214 240 4 51 7 } -nblayers 6
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 73 -shape 13303 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 73 -freewire 409 -freeedge 4891 -sharededge 5892 -max_solid 0 -max_shell 0 -max_face 73 -max_freewire 414 -max_freeedge 4891
+checkmaxtol res_2 -tol 0.6679845366 -avg 0.004666698119 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: NBSHAPES : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
puts "TODO CR23096 ALL: COLORS : Faulty"
puts "TODO CR23096 ALL: LAYERS : Faulty"
-
set filename BUC60195.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 367 ) Warnings = 57 ( 1205 ) Summary = 57 ( 1572 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 211 ( 211 ) Summary = 12556 ( 12569 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 211 ( 211 ) FreeWire = 255 ( 267 ) FreeEdge = 3643 ( 3643 ) SharedEdge = 5784 ( 5784 )
-TOLERANCE : MaxTol = 0.9498862984 ( 0.9498862984 ) AvgTol = 0.008210118978 ( 0.008216800661 )
-LABELS : N0Labels = 3 ( 6 ) N1Labels = 454 ( 1912 ) N2Labels = 0 ( 0 ) TotalLabels = 457 ( 1918 ) NameLabels = 393 ( 870 ) ColorLabels = 454 ( 1909 ) LayerLabels = 386 ( 1892 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 5 ( 7 )
-COLORS : Colors = CYAN1 GREEN MAGENTA1 RED WHITE ( BLUE1 CYAN1 GREEN MAGENTA1 RED WHITE YELLOW )
-NLAYERS : NLayers = 3 ( 6 )
-LAYERS : Layers = 200 240 4 ( 192 200 239 240 255 4 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1209 -max_faults 367
+checkxstat D_First -n0 6 -n1 1912 -n2 0 -total 1918 -withname 870 -withcolor 1909 -withlayer 1892 -centroid 0 -volume 0 -area 0 -colors { BLUE1 CYAN1 GREEN MAGENTA1 RED WHITE YELLOW } -nbcolors 7 -layers { 192 200 239 240 255 4 } -nblayers 6
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 211 -shape 12569
+checkstatshape res_1 -solid 0 -shell 0 -face 211 -freewire 267 -freeedge 3643 -sharededge 5784
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.9498862984 -avg 0.008216800661]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1209 -max_faults 367
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 64 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 6 -n1 1912 -n2 0 -total 1918 -withname 870 -withcolor 1909 -withlayer 1892 -centroid 0 -volume 0 -area 0 -nbcolors 7 -nblayers 6
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 454 -n2 0 -total 457 -withname 393 -withcolor 454 -withlayer 386 -centroid 0 -volume 0 -area 0 -colors { CYAN1 GREEN MAGENTA1 RED WHITE } -nbcolors 5 -layers { 200 240 4 } -nblayers 3
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 211 -shape 12556 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 211 -freewire 255 -freeedge 3643 -sharededge 5784 -max_solid 0 -max_shell 0 -max_face 211 -max_freewire 267 -max_freeedge 3643
+checkmaxtol res_2 -tol 0.9498862984 -avg 0.008210118978 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: DATA : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
puts "TODO CR23096 ALL: COLORS : Faulty"
-set LinuxDiff 2
set filename buc60894.igs
-set ref_data {
-DATA : Faulties = 15 ( 0 ) Warnings = 0 ( 0 ) Summary = 15 ( 0 )
-TPSTAT : Faulties = 30 ( 36 ) Warnings = 559 ( 1854 ) Summary = 589 ( 1890 )
-CHECKSHAPE : Wires = 5 ( 6 ) Faces = 5 ( 6 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 3499 ( 3499 ) Summary = 43148 ( 43109 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 3499 ( 3499 ) FreeWire = 0 ( 0 ) FreeEdge = 164 ( 164 ) SharedEdge = 18139 ( 18117 )
-TOLERANCE : MaxTol = 0.9816000285 ( 5.284023931 ) AvgTol = 0.02460215735 ( 0.02803309188 )
-LABELS : N0Labels = 12 ( 30 ) N1Labels = 3661 ( 3664 ) N2Labels = 0 ( 0 ) TotalLabels = 3673 ( 3694 ) NameLabels = 1379 ( 3694 ) ColorLabels = 3661 ( 3660 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 10 ( 11 )
-COLORS : Colors = BLUE1 DEEPSKYBLUE2 DODGERBLUE2 GREEN MAGENTA1 ORANGE ORANGERED RED TURQUOISE4 WHITE ( BLUE1 DEEPSKYBLUE2 DODGERBLUE2 GREEN MAGENTA1 ORANGE ORANGERED RED TURQUOISE4 WHITE YELLOW )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1854 -max_faults 36
+checkxstat D_First -n0 30 -n1 3664 -n2 0 -total 3694 -withname 3694 -withcolor 3660 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 DEEPSKYBLUE2 DODGERBLUE2 GREEN MAGENTA1 ORANGE ORANGERED RED TURQUOISE4 WHITE YELLOW } -nbcolors 11 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 6 -max_faces 6 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 3499 -shape 43109
+checkstatshape res_1 -solid 0 -shell 0 -face 3499 -freewire 0 -freeedge 164 -sharededge 18117
+set max_tol_res_1 [checkmaxtol res_1 -tol 5.284023931 -avg 0.02803309188]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1854 -max_faults 36
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 15
+checkdoc "tpstat c" -max_warns 599 -max_faults 30
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 30 -n1 3664 -n2 0 -total 3694 -withname 3694 -withcolor 3660 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 11 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 12 -n1 3661 -n2 0 -total 3673 -withname 1379 -withcolor 3661 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 DEEPSKYBLUE2 DODGERBLUE2 GREEN MAGENTA1 ORANGE ORANGERED RED TURQUOISE4 WHITE } -nbcolors 10 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 6 -max_faces 6 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 5 -max_faces 5 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 3499 -shape 43148 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 3499 -freewire 0 -freeedge 164 -sharededge 18139 -max_solid 0 -max_shell 0 -max_face 3499 -max_freewire 0 -max_freeedge 164
+checkmaxtol res_2 -tol 0.9816000285 -avg 0.02460215735 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: DATA : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
puts "TODO CR23096 ALL: COLORS : Faulty"
puts "TODO CR23096 ALL: LAYERS : Faulty"
-
set filename BUC60898.igs
-set ref_data {
-DATA : Faulties = 3 ( 0 ) Warnings = 0 ( 0 ) Summary = 3 ( 0 )
-TPSTAT : Faulties = 6 ( 126 ) Warnings = 18 ( 675 ) Summary = 24 ( 801 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 91 ( 91 ) Summary = 24023 ( 23781 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 91 ( 91 ) FreeWire = 304 ( 372 ) FreeEdge = 7210 ( 7210 ) SharedEdge = 10377 ( 10271 )
-TOLERANCE : MaxTol = 0.0779303086 ( 0.07793030858 ) AvgTol = 6.701253429e-05 ( 0.0001033335359 )
-LABELS : N0Labels = 4 ( 38 ) N1Labels = 2509 ( 4250 ) N2Labels = 0 ( 0 ) TotalLabels = 2513 ( 4288 ) NameLabels = 2357 ( 2884 ) ColorLabels = 2509 ( 4215 ) LayerLabels = 249 ( 515 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 6 ( 7 )
-COLORS : Colors = BLUE1 GREEN MAGENTA1 RED WHITE YELLOW ( BLUE1 CYAN1 GREEN MAGENTA1 RED WHITE YELLOW )
-NLAYERS : NLayers = 3 ( 4 )
-LAYERS : Layers = 255 30 50 ( 255 30 5 50 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 676 -max_faults 126
+checkxstat D_First -n0 38 -n1 4250 -n2 0 -total 4288 -withname 2884 -withcolor 4215 -withlayer 515 -centroid 0 -volume 0 -area 0 -colors { BLUE1 CYAN1 GREEN MAGENTA1 RED WHITE YELLOW } -nbcolors 7 -layers { 255 30 5 50 } -nblayers 4
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 91 -shape 23781
+checkstatshape res_1 -solid 0 -shell 0 -face 91 -freewire 372 -freeedge 7210 -sharededge 10271
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.07793030858 -avg 0.0001033335359]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 676 -max_faults 126
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 3
+checkdoc "tpstat c" -max_warns 18 -max_faults 6
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 38 -n1 4250 -n2 0 -total 4288 -withname 2884 -withcolor 4215 -withlayer 515 -centroid 0 -volume 0 -area 0 -nbcolors 7 -nblayers 4
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 4 -n1 2509 -n2 0 -total 2513 -withname 2357 -withcolor 2509 -withlayer 249 -centroid 0 -volume 0 -area 0 -colors { BLUE1 GREEN MAGENTA1 RED WHITE YELLOW } -nbcolors 6 -layers { 255 30 50 } -nblayers 3
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 91 -shape 24023 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 91 -freewire 304 -freeedge 7210 -sharededge 10377 -max_solid 0 -max_shell 0 -max_face 91 -max_freewire 372 -max_freeedge 7210
+checkmaxtol res_2 -tol 0.0779303086 -avg 6.701253429e-05 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
puts "TODO CR23096 ALL: COLORS : Faulty"
puts "TODO CR23096 ALL: LAYERS : Faulty"
-
set filename BUC61004-4.igs
-set ref_data {
-DATA : Faulties = 0 ( 2 ) Warnings = 0 ( 0 ) Summary = 0 ( 2 )
-TPSTAT : Faulties = 0 ( 146 ) Warnings = 0 ( 153 ) Summary = 0 ( 299 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 0 ( 0 ) Summary = 923 ( 934 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 0 ( 0 ) FreeWire = 7 ( 7 ) FreeEdge = 315 ( 315 ) SharedEdge = 315 ( 315 )
-TOLERANCE : MaxTol = 1e-07 ( 1e-07 ) AvgTol = 1e-07 ( 1e-07 )
-LABELS : N0Labels = 5 ( 16 ) N1Labels = 284 ( 298 ) N2Labels = 0 ( 0 ) TotalLabels = 289 ( 314 ) NameLabels = 5 ( 27 ) ColorLabels = 284 ( 309 ) LayerLabels = 124 ( 309 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 2 ( 5 )
-COLORS : Colors = RED WHITE ( CYAN1 GREEN RED WHITE YELLOW )
-NLAYERS : NLayers = 3 ( 4 )
-LAYERS : Layers = 1 2 3 ( 1 11 2 3 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 2
+checkdoc "tpstat c" -max_warns 153 -max_faults 146
+checkxstat D_First -n0 16 -n1 298 -n2 0 -total 314 -withname 27 -withcolor 309 -withlayer 309 -centroid 0 -volume 0 -area 0 -colors { CYAN1 GREEN RED WHITE YELLOW } -nbcolors 5 -layers { 1 11 2 3 } -nblayers 4
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 0 -shape 934
+checkstatshape res_1 -solid 0 -shell 0 -face 0 -freewire 7 -freeedge 315 -sharededge 315
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-07 -avg 1e-07]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 2
+checkdoc "tpstat c" -max_warns 153 -max_faults 146
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 16 -n1 298 -n2 0 -total 314 -withname 27 -withcolor 309 -withlayer 309 -centroid 0 -volume 0 -area 0 -nbcolors 5 -nblayers 4
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 5 -n1 284 -n2 0 -total 289 -withname 5 -withcolor 284 -withlayer 124 -centroid 0 -volume 0 -area 0 -colors { RED WHITE } -nbcolors 2 -layers { 1 2 3 } -nblayers 3
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 0 -shape 923 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 0 -freewire 7 -freeedge 315 -sharededge 315 -max_solid 0 -max_shell 0 -max_face 0 -max_freewire 7 -max_freeedge 315
+checkmaxtol res_2 -tol 1e-07 -avg 1e-07 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: CHECKSHAPE : Faulty"
puts "TODO CR23096 ALL: NBSHAPES : Faulty"
puts "TODO CR23096 ALL: TOLERANCE : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
-set LinuxDiff 1
set filename CEA_cuve-V5.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 6 ) Warnings = 0 ( 6 ) Summary = 0 ( 12 )
-CHECKSHAPE : Wires = 6 ( 3 ) Faces = 6 ( 3 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 114 ( 114 ) Summary = 1231 ( 1240 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 114 ( 114 ) FreeWire = 2 ( 2 ) FreeEdge = 17 ( 17 ) SharedEdge = 493 ( 496 )
-TOLERANCE : MaxTol = 1380.000139 ( 0.0004988991066 ) AvgTol = 2.598883884 ( 1.625255099e-005 )
-LABELS : N0Labels = 122 ( 122 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 122 ( 122 ) NameLabels = 122 ( 122 ) ColorLabels = 120 ( 122 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 4 ( 4 )
-COLORS : Colors = BLACK LIGHTSTEELBLUE1 PALEGOLDENROD WHITE ( BLACK LIGHTSTEELBLUE1 PALEGOLDENROD WHITE )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 6 -max_faults 6
+checkxstat D_First -n0 122 -n1 0 -n2 0 -total 122 -withname 122 -withcolor 122 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLACK LIGHTSTEELBLUE1 PALEGOLDENROD WHITE } -nbcolors 4 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 3 -max_faces 3 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 114 -shape 1240
+checkstatshape res_1 -solid 0 -shell 0 -face 114 -freewire 2 -freeedge 17 -sharededge 496
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.0004988991066 -avg 1.625255099e-005]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 6 -max_faults 6
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 122 -n1 0 -n2 0 -total 122 -withname 122 -withcolor 122 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 4 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 122 -n1 0 -n2 0 -total 122 -withname 122 -withcolor 120 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLACK LIGHTSTEELBLUE1 PALEGOLDENROD WHITE } -nbcolors 4 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 3 -max_faces 3 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 6 -max_faces 6 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 114 -shape 1231 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 114 -freewire 2 -freeedge 17 -sharededge 493 -max_solid 0 -max_shell 0 -max_face 114 -max_freewire 2 -max_freeedge 17
+checkmaxtol res_2 -tol 1380.000139 -avg 2.598883884 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: DATA : Faulty"
puts "TODO CR23096 ALL: TPSTAT : Faulty"
puts "TODO CR23096 ALL: NBSHAPES : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
puts "TODO CR23096 ALL: COLORS : Faulty"
-
set filename CTS17802.igs
-set ref_data {
-DATA : Faulties = 5 ( 0 ) Warnings = 0 ( 194 ) Summary = 5 ( 194 )
-TPSTAT : Faulties = 10 ( 1 ) Warnings = 27 ( 137 ) Summary = 37 ( 138 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 107 ( 107 ) Summary = 2280 ( 2286 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 107 ( 107 ) FreeWire = 9 ( 9 ) FreeEdge = 282 ( 282 ) SharedEdge = 902 ( 908 )
-TOLERANCE : MaxTol = 0.07760384877 ( 0.07760384877 ) AvgTol = 0.001993343793 ( 0.002045377633 )
-LABELS : N0Labels = 19 ( 19 ) N1Labels = 347 ( 612 ) N2Labels = 0 ( 0 ) TotalLabels = 366 ( 631 ) NameLabels = 366 ( 433 ) ColorLabels = 357 ( 629 ) LayerLabels = 357 ( 629 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 5 ( 6 )
-COLORS : Colors = BLUE1 GREEN MAGENTA2 WHITE YELLOW ( BLUE1 GREEN MAGENTA2 RED WHITE YELLOW )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 20 ( 20 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 194 -max_faults 0
+checkdoc "tpstat c" -max_warns 139 -max_faults 1
+checkxstat D_First -n0 19 -n1 612 -n2 0 -total 631 -withname 433 -withcolor 629 -withlayer 629 -centroid 0 -volume 0 -area 0 -colors { BLUE1 GREEN MAGENTA2 RED WHITE YELLOW } -nbcolors 6 -layers { 20 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 107 -shape 2286
+checkstatshape res_1 -solid 0 -shell 0 -face 107 -freewire 9 -freeedge 282 -sharededge 908
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.07760384877 -avg 0.002045377633]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 194 -max_faults 0
+checkdoc "tpstat c" -max_warns 139 -max_faults 1
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 5
+checkdoc "tpstat c" -max_warns 27 -max_faults 10
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 19 -n1 612 -n2 0 -total 631 -withname 433 -withcolor 629 -withlayer 629 -centroid 0 -volume 0 -area 0 -nbcolors 6 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 19 -n1 347 -n2 0 -total 366 -withname 366 -withcolor 357 -withlayer 357 -centroid 0 -volume 0 -area 0 -colors { BLUE1 GREEN MAGENTA2 WHITE YELLOW } -nbcolors 5 -layers { 20 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 107 -shape 2280 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 107 -freewire 9 -freeedge 282 -sharededge 902 -max_solid 0 -max_shell 0 -max_face 107 -max_freewire 9 -max_freeedge 282
+checkmaxtol res_2 -tol 0.07760384877 -avg 0.001993343793 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: NBSHAPES : Faulty"
puts "TODO CR23096 ALL: STATSHAPE : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
-set LinuxDiff 1
set filename 919-004-T03-04-CP-VL.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 2 ) Warnings = 312 ( 2188 ) Summary = 312 ( 2190 )
-CHECKSHAPE : Wires = 0 ( 3 ) Faces = 0 ( 3 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 1457 ( 1455 ) Summary = 38832 ( 38834 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 1457 ( 1455 ) FreeWire = 516 ( 528 ) FreeEdge = 6208 ( 6208 ) SharedEdge = 15307 ( 15304 )
-TOLERANCE : MaxTol = 0.3053256329 ( 0.4653265763 ) AvgTol = 0.0008083573819 ( 0.0008563940583 )
-LABELS : N0Labels = 5 ( 5 ) N1Labels = 5689 ( 12405 ) N2Labels = 0 ( 0 ) TotalLabels = 5694 ( 12410 ) NameLabels = 5694 ( 7040 ) ColorLabels = 5689 ( 12409 ) LayerLabels = 5689 ( 12409 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = TURQUOISE WHITE ( TURQUOISE WHITE )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 1 ( 1 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2180 -max_faults 2
+checkxstat D_First -n0 5 -n1 12405 -n2 0 -total 12410 -withname 7040 -withcolor 12409 -withlayer 12409 -centroid 0 -volume 0 -area 0 -colors { TURQUOISE WHITE } -nbcolors 2 -layers { 1 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 3 -max_faces 3 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 1455 -shape 38834
+checkstatshape res_1 -solid 0 -shell 0 -face 1455 -freewire 528 -freeedge 6208 -sharededge 15304
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.4653265763 -avg 0.0008563940583]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2180 -max_faults 2
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 310 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 5 -n1 12405 -n2 0 -total 12410 -withname 7040 -withcolor 12409 -withlayer 12409 -centroid 0 -volume 0 -area 0 -nbcolors 2 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 5 -n1 5689 -n2 0 -total 5694 -withname 5694 -withcolor 5689 -withlayer 5689 -centroid 0 -volume 0 -area 0 -colors { TURQUOISE WHITE } -nbcolors 2 -layers { 1 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 3 -max_faces 3 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 1457 -shape 38832 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 1457 -freewire 516 -freeedge 6208 -sharededge 15307 -max_solid 0 -max_shell 0 -max_face 1455 -max_freewire 528 -max_freeedge 6208
+checkmaxtol res_2 -tol 0.3053256329 -avg 0.0008083573819 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
puts "TODO CR23096 ALL: CHECKSHAPE : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
#puts "TODO CR23096 ALL: STATSHAPE : Faulty "
#puts "TODO CR23096 ALL: Error : 2 differences with reference data found :"
-set LinuxDiff 2
-set LinuxFaulties {STATSHAPE}
set filename Henri.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 69 ( 41 ) Summary = 69 ( 41 )
-CHECKSHAPE : Wires = 8 ( 5 ) Faces = 8 ( 5 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 3592 ( 2314 ) Summary = 112057 ( 71781 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 3592 ( 3592 ) FreeWire = 4024 ( 4024 ) FreeEdge = 28849 ( 28849 ) SharedEdge = 44964 ( 28799 )
-TOLERANCE : MaxTol = 0.9133007093 ( 0.9133008813 ) AvgTol = 0.005629101837 ( 0.005904201197 )
-LABELS : N0Labels = 24 ( 24 ) N1Labels = 5153 ( 6559 ) N2Labels = 0 ( 0 ) TotalLabels = 5177 ( 6583 ) NameLabels = 5177 ( 6583 ) ColorLabels = 5153 ( 6559 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 6 ( 6 )
-COLORS : Colors = ANTIQUEWHITE4 CHARTREUSE DARKORANGE2 GREENYELLOW STEELBLUE2 WHEAT3 ( ANTIQUEWHITE4 CHARTREUSE DARKORANGE2 GREENYELLOW STEELBLUE2 WHEAT3 )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 54 -max_faults 0
+checkxstat D_First -n0 24 -n1 6559 -n2 0 -total 6583 -withname 6583 -withcolor 6559 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { ANTIQUEWHITE4 CHARTREUSE DARKORANGE2 GREENYELLOW STEELBLUE2 WHEAT3 } -nbcolors 6 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 5 -max_faces 5 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 2314 -shape 71781
+checkstatshape res_1 -solid 0 -shell 0 -face 3592 -freewire 4024 -freeedge 28849 -sharededge 28799
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.9133008813 -avg 0.005904201197]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 54 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 78 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 24 -n1 6559 -n2 0 -total 6583 -withname 6583 -withcolor 6559 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 6 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 24 -n1 5153 -n2 0 -total 5177 -withname 5177 -withcolor 5153 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { ANTIQUEWHITE4 CHARTREUSE DARKORANGE2 GREENYELLOW STEELBLUE2 WHEAT3 } -nbcolors 6 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 5 -max_faces 5 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 8 -max_faces 8 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 3592 -shape 112057 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 3592 -freewire 4024 -freeedge 28849 -sharededge 44964 -max_solid 0 -max_shell 0 -max_face 3592 -max_freewire 4024 -max_freeedge 28849
+checkmaxtol res_2 -tol 0.9133007093 -avg 0.005629101837 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename PRO7978.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 1 ) Summary = 0 ( 1 )
-TPSTAT : Faulties = 2 ( 0 ) Warnings = 174 ( 940 ) Summary = 176 ( 940 )
-CHECKSHAPE : Wires = 8 ( 8 ) Faces = 5 ( 5 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 346 ( 346 ) Summary = 25253 ( 25254 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 346 ( 346 ) FreeWire = 84 ( 84 ) FreeEdge = 1563 ( 1563 ) SharedEdge = 12102 ( 12103 )
-TOLERANCE : MaxTol = 0.08971322527 ( 0.2157335194 ) AvgTol = 0.001218977908 ( 0.00125488316 )
-LABELS : N0Labels = 560 ( 560 ) N1Labels = 94 ( 90 ) N2Labels = 0 ( 0 ) TotalLabels = 654 ( 650 ) NameLabels = 648 ( 650 ) ColorLabels = 554 ( 640 ) LayerLabels = 554 ( 640 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 3 ( 3 )
-COLORS : Colors = CYAN1 GREEN RED ( CYAN1 GREEN RED )
-NLAYERS : NLayers = 3 ( 3 )
-LAYERS : Layers = 1 10 20 ( 1 10 20 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 940 -max_faults 0
+checkxstat D_First -n0 560 -n1 90 -n2 0 -total 650 -withname 650 -withcolor 640 -withlayer 640 -centroid 0 -volume 0 -area 0 -colors { CYAN1 GREEN RED } -nbcolors 3 -layers { 1 10 20 } -nblayers 3
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 8 -max_faces 5 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 346 -shape 25254
+checkstatshape res_1 -solid 0 -shell 0 -face 346 -freewire 84 -freeedge 1563 -sharededge 12103
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.2157335194 -avg 0.00125488316]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 940 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 172 -max_faults 2
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 560 -n1 90 -n2 0 -total 650 -withname 650 -withcolor 640 -withlayer 640 -centroid 0 -volume 0 -area 0 -nbcolors 3 -nblayers 3
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 560 -n1 94 -n2 0 -total 654 -withname 648 -withcolor 554 -withlayer 554 -centroid 0 -volume 0 -area 0 -colors { CYAN1 GREEN RED } -nbcolors 3 -layers { 1 10 20 } -nblayers 3
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 8 -max_faces 5 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 8 -max_faces 5 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 346 -shape 25253 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 346 -freewire 84 -freeedge 1563 -sharededge 12102 -max_solid 0 -max_shell 0 -max_face 346 -max_freewire 84 -max_freeedge 1563
+checkmaxtol res_2 -tol 0.08971322527 -avg 0.001218977908 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
puts "TODO CR23096 ALL: COLORS : Faulty"
-
set filename matrice.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 58 ( 135 ) Summary = 58 ( 135 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 783 ( 783 ) Summary = 7819 ( 7819 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 783 ( 783 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 3132 ( 3132 )
-TOLERANCE : MaxTol = 1e-007 ( 1e-007 ) AvgTol = 1e-007 ( 1e-007 )
-LABELS : N0Labels = 784 ( 784 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 784 ( 784 ) NameLabels = 784 ( 784 ) ColorLabels = 783 ( 784 ) LayerLabels = 783 ( 784 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 2 )
-COLORS : Colors = YELLOW ( MAGENTA1 YELLOW )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 5 ( 5 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 135 -max_faults 0
+checkxstat D_First -n0 784 -n1 0 -n2 0 -total 784 -withname 784 -withcolor 784 -withlayer 784 -centroid 0 -volume 0 -area 0 -colors { MAGENTA1 YELLOW } -nbcolors 2 -layers { 5 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 783 -shape 7819
+checkstatshape res_1 -solid 0 -shell 0 -face 783 -freewire 0 -freeedge 0 -sharededge 3132
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-007 -avg 1e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 135 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 58 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 784 -n1 0 -n2 0 -total 784 -withname 784 -withcolor 784 -withlayer 784 -centroid 0 -volume 0 -area 0 -nbcolors 2 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 784 -n1 0 -n2 0 -total 784 -withname 784 -withcolor 783 -withlayer 783 -centroid 0 -volume 0 -area 0 -colors { YELLOW } -nbcolors 1 -layers { 5 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 783 -shape 7819 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 783 -freewire 0 -freeedge 0 -sharededge 3132 -max_solid 0 -max_shell 0 -max_face 783 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1e-007 -avg 1e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: STATSHAPE : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
-set LinuxDiff 4
set filename y306351f.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 1 ) Summary = 0 ( 1 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 160 ( 1955 ) Summary = 160 ( 1955 )
-CHECKSHAPE : Wires = 0 ( 1 ) Faces = 0 ( 1 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 392 ( 390 ) Summary = 57070 ( 57068 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 392 ( 390 ) FreeWire = 0 ( 0 ) FreeEdge = 1134 ( 1134 ) SharedEdge = 27576 ( 27576 )
-TOLERANCE : MaxTol = 0.01225276587 ( 0.01225276466 ) AvgTol = 0.0001845815979 ( 0.0001846530408 )
-LABELS : N0Labels = 1524 ( 1524 ) N1Labels = 0 ( 26428 ) N2Labels = 0 ( 0 ) TotalLabels = 1524 ( 27952 ) NameLabels = 1524 ( 1530 ) ColorLabels = 1497 ( 27952 ) LayerLabels = 1107 ( 1134 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = CYAN1 WHITE ( CYAN1 WHITE )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 1 ( 1 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 1955 -max_faults 0
+checkxstat D_First -n0 1524 -n1 26428 -n2 0 -total 27952 -withname 1530 -withcolor 27952 -withlayer 1134 -centroid 0 -volume 0 -area 0 -colors { CYAN1 WHITE } -nbcolors 2 -layers { 1 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 1 -max_faces 1 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 390 -shape 57068
+checkstatshape res_1 -solid 0 -shell 0 -face 390 -freewire 0 -freeedge 1134 -sharededge 27576
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.01225276466 -avg 0.0001846530408]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 1955 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 160 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1524 -n1 26428 -n2 0 -total 27952 -withname 1530 -withcolor 27952 -withlayer 1134 -centroid 0 -volume 0 -area 0 -nbcolors 2 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1524 -n1 0 -n2 0 -total 1524 -withname 1524 -withcolor 1497 -withlayer 1107 -centroid 0 -volume 0 -area 0 -colors { CYAN1 WHITE } -nbcolors 2 -layers { 1 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 1 -max_faces 1 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 392 -shape 57070 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 392 -freewire 0 -freeedge 1134 -sharededge 27576 -max_solid 0 -max_shell 0 -max_face 390 -max_freewire 0 -max_freeedge 1134
+checkmaxtol res_2 -tol 0.01225276587 -avg 0.0001845815979 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
puts "TODO CR23096 ALL: COLORS : Faulty"
-set LinuxDiff 4
set filename PRO11641.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 43 ( 1750 ) Summary = 43 ( 1750 )
-CHECKSHAPE : Wires = 7 ( 7 ) Faces = 7 ( 7 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 1424 ( 1424 ) Summary = 23704 ( 23704 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 1424 ( 1424 ) FreeWire = 23 ( 23 ) FreeEdge = 461 ( 461 ) SharedEdge = 10206 ( 10206 )
-TOLERANCE : MaxTol = 0.01698924283 ( 0.03769875288 ) AvgTol = 0.0002746484976 ( 0.0003801335989 )
-LABELS : N0Labels = 1784 ( 1784 ) N1Labels = 0 ( 1660 ) N2Labels = 0 ( 0 ) TotalLabels = 1784 ( 3444 ) NameLabels = 1784 ( 1784 ) ColorLabels = 1761 ( 3444 ) LayerLabels = 1761 ( 1784 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 7 ( 8 )
-COLORS : Colors = BLUE1 CYAN1 GREEN MAGENTA1 RED WHITE YELLOW ( BLACK BLUE1 CYAN1 GREEN MAGENTA1 RED WHITE YELLOW )
-NLAYERS : NLayers = 5 ( 5 )
-LAYERS : Layers = 1 11 214 239 4 ( 1 11 214 239 4 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1740 -max_faults 0
+checkxstat D_First -n0 1784 -n1 1660 -n2 0 -total 3444 -withname 1784 -withcolor 3444 -withlayer 1784 -centroid 0 -volume 0 -area 0 -colors { BLACK BLUE1 CYAN1 GREEN MAGENTA1 RED WHITE YELLOW } -nbcolors 8 -layers { 1 11 214 239 4 } -nblayers 5
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 7 -max_faces 7 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 1424 -shape 23704
+checkstatshape res_1 -solid 0 -shell 0 -face 1424 -freewire 23 -freeedge 461 -sharededge 10206
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.03769875288 -avg 0.0003801335989]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1740 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 43 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1784 -n1 1660 -n2 0 -total 3444 -withname 1784 -withcolor 3444 -withlayer 1784 -centroid 0 -volume 0 -area 0 -nbcolors 8 -nblayers 5
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1784 -n1 0 -n2 0 -total 1784 -withname 1784 -withcolor 1761 -withlayer 1761 -centroid 0 -volume 0 -area 0 -colors { BLUE1 CYAN1 GREEN MAGENTA1 RED WHITE YELLOW } -nbcolors 7 -layers { 1 11 214 239 4 } -nblayers 5
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 7 -max_faces 7 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 7 -max_faces 7 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 1424 -shape 23704 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 1424 -freewire 23 -freeedge 461 -sharededge 10206 -max_solid 0 -max_shell 0 -max_face 1424 -max_freewire 23 -max_freeedge 461
+checkmaxtol res_2 -tol 0.01698924283 -avg 0.0002746484976 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
puts "TODO CR23096 ALL: LAYERS : Faulty"
-
set filename PRO11713.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 33 ( 8228 ) Summary = 33 ( 8228 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 127 ( 127 ) Summary = 238094 ( 238094 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 127 ( 127 ) FreeWire = 8189 ( 8189 ) FreeEdge = 93645 ( 93645 ) SharedEdge = 94153 ( 94153 )
-TOLERANCE : MaxTol = 1.000100036e-007 ( 1.000100071e-007 ) AvgTol = 1.000000246e-007 ( 1.000000046e-007 )
-LABELS : N0Labels = 42695 ( 42695 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 42695 ( 42695 ) NameLabels = 42695 ( 42695 ) ColorLabels = 0 ( 0 ) LayerLabels = 33059 ( 42695 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 87 ( 91 )
-LAYERS : Layers = 1 101 106 111 131 132 141 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 163 164 165 166 167 168 169 170 171 176 177 180 181 182 183 184 185 187 188 189 190 192 193 194 195 196 197 207 21 211 212 22 228 229 230 231 235 236 254 3 31 32 36 37 4 51 52 53 56 61 62 63 71 72 73 74 76 77 78 79 81 82 91 ( 1 101 106 111 131 132 141 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 163 164 165 166 167 168 169 170 171 176 177 180 181 182 183 184 185 187 188 189 190 191 192 193 194 195 196 197 199 207 21 211 212 22 228 229 230 231 235 236 254 3 31 32 36 37 4 51 52 53 56 6 61 62 63 7 71 72 73 74 76 77 78 79 81 82 91 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 8228 -max_faults 0
+checkxstat D_First -n0 42695 -n1 0 -n2 0 -total 42695 -withname 42695 -withcolor 0 -withlayer 42695 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { 1 101 106 111 131 132 141 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 163 164 165 166 167 168 169 170 171 176 177 180 181 182 183 184 185 187 188 189 190 191 192 193 194 195 196 197 199 207 21 211 212 22 228 229 230 231 235 236 254 3 31 32 36 37 4 51 52 53 56 6 61 62 63 7 71 72 73 74 76 77 78 79 81 82 91 } -nblayers 91
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 127 -shape 238094
+checkstatshape res_1 -solid 0 -shell 0 -face 127 -freewire 8189 -freeedge 93645 -sharededge 94153
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100071e-007 -avg 1.000000046e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 8228 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 33 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 42695 -n1 0 -n2 0 -total 42695 -withname 42695 -withcolor 0 -withlayer 42695 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 91
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 42695 -n1 0 -n2 0 -total 42695 -withname 42695 -withcolor 0 -withlayer 33059 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { 1 101 106 111 131 132 141 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 163 164 165 166 167 168 169 170 171 176 177 180 181 182 183 184 185 187 188 189 190 192 193 194 195 196 197 207 21 211 212 22 228 229 230 231 235 236 254 3 31 32 36 37 4 51 52 53 56 61 62 63 71 72 73 74 76 77 78 79 81 82 91 } -nblayers 87
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 127 -shape 238094 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 127 -freewire 8189 -freeedge 93645 -sharededge 94153 -max_solid 0 -max_shell 0 -max_face 127 -max_freewire 8189 -max_freeedge 93645
+checkmaxtol res_2 -tol 1.000100036e-007 -avg 1.000000246e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: CHECKSHAPE : Faulty"
puts "TODO CR23096 ALL: NBSHAPES : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
puts "TODO CR23096 ALL: COLORS : Faulty"
-puts "TODO CR25013 ALL: Error : 3 differences with reference data found"
-
+puts "TODO CR25013 ALL: Error : is WRONG because number of SHAPE entities in shape"
+puts "TODO CR25013 ALL: STATSHAPE : Faulty ref number of shared edges in command statshape"
set filename PRO18777-3.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 75 ( 1414 ) Summary = 75 ( 1414 )
-CHECKSHAPE : Wires = 1 ( 0 ) Faces = 2 ( 1 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 1568 ( 1568 ) Summary = 19289 ( 19302 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 1568 ( 1568 ) FreeWire = 0 ( 14 ) FreeEdge = 28 ( 28 ) SharedEdge = 8150 ( 8149 )
-TOLERANCE : MaxTol = 0.9978911708 ( 0.9978911666 ) AvgTol = 0.01219320525 ( 0.0121152761 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 1596 ( 5152 ) N2Labels = 0 ( 0 ) TotalLabels = 1597 ( 5153 ) NameLabels = 1597 ( 2712 ) ColorLabels = 1596 ( 5152 ) LayerLabels = 1596 ( 5152 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 2 ( 7 )
-COLORS : Colors = BLUE1 WHITE ( BLUE1 CYAN1 GREEN MAGENTA1 RED WHITE YELLOW )
-NLAYERS : NLayers = 2 ( 2 )
-LAYERS : Layers = 1 254 ( 1 254 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1468 -max_faults 0
+checkxstat D_First -n0 1 -n1 5152 -n2 0 -total 5153 -withname 2712 -withcolor 5152 -withlayer 5152 -centroid 0 -volume 0 -area 0 -colors { BLUE1 CYAN1 GREEN MAGENTA1 RED WHITE YELLOW } -nbcolors 7 -layers { 1 254 } -nblayers 2
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 1 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 1568 -shape 19302
+checkstatshape res_1 -solid 0 -shell 0 -face 1568 -freewire 14 -freeedge 28 -sharededge 8149
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.9978911666 -avg 0.0121152761]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1468 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 83 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 5152 -n2 0 -total 5153 -withname 2712 -withcolor 5152 -withlayer 5152 -centroid 0 -volume 0 -area 0 -nbcolors 7 -nblayers 2
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 1596 -n2 0 -total 1597 -withname 1597 -withcolor 1596 -withlayer 1596 -centroid 0 -volume 0 -area 0 -colors { BLUE1 WHITE } -nbcolors 2 -layers { 1 254 } -nblayers 2
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 1 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 1 -max_faces 2 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 1568 -shape 19289 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 1568 -freewire 0 -freeedge 28 -sharededge 8150 -max_solid 0 -max_shell 0 -max_face 1568 -max_freewire 14 -max_freeedge 28
+checkmaxtol res_2 -tol 0.9978911708 -avg 0.01219320525 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: NBSHAPES : Faulty"
-puts "TODO CR23096 ALL: TOLERANCE : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
puts "TODO CR23096 ALL: COLORS : Faulty"
-
set filename PRO5236.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 2 ) Warnings = 145 ( 1619 ) Summary = 145 ( 1621 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 253 ( 253 ) Summary = 5359 ( 5363 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 253 ( 253 ) FreeWire = 7 ( 10 ) FreeEdge = 78 ( 78 ) SharedEdge = 2412 ( 2412 )
-TOLERANCE : MaxTol = 0.04838312754 ( 0.0483782783 ) AvgTol = 0.002925020972 ( 0.002891060102 )
-LABELS : N0Labels = 8 ( 8 ) N1Labels = 269 ( 2591 ) N2Labels = 0 ( 0 ) TotalLabels = 277 ( 2599 ) NameLabels = 277 ( 384 ) ColorLabels = 272 ( 2597 ) LayerLabels = 272 ( 2597 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 3 ( 4 )
-COLORS : Colors = BLUE1 WHITE YELLOW ( BLUE1 GREEN WHITE YELLOW )
-NLAYERS : NLayers = 4 ( 4 )
-LAYERS : Layers = 101 201 51 61 ( 101 201 51 61 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 1661 -max_faults 2
+checkxstat D_First -n0 8 -n1 2591 -n2 0 -total 2599 -withname 384 -withcolor 2597 -withlayer 2597 -centroid 0 -volume 0 -area 0 -colors { BLUE1 GREEN WHITE YELLOW } -nbcolors 4 -layers { 101 201 51 61 } -nblayers 4
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 253 -shape 5363
+checkstatshape res_1 -solid 0 -shell 0 -face 253 -freewire 10 -freeedge 78 -sharededge 2412
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.0483782783 -avg 0.002891060102]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 1661 -max_faults 2
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 128 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 8 -n1 2591 -n2 0 -total 2599 -withname 384 -withcolor 2597 -withlayer 259704 -centroid 0 -volume 0 -area 0 -nbcolors 4 -nblayers 4
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 8 -n1 269 -n2 0 -total 277 -withname 277 -withcolor 272 -withlayer 272 -centroid 0 -volume 0 -area 0 -colors { BLUE1 WHITE YELLOW } -nbcolors 3 -layers { 101 201 51 61 } -nblayers 4
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 253 -shape 5359 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 253 -freewire 7 -freeedge 78 -sharededge 2412 -max_solid 0 -max_shell 0 -max_face 253 -max_freewire 10 -max_freeedge 78
+checkmaxtol res_2 -tol 0.04838312754 -avg 0.002925020972 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: DATA : Faulty"
puts "TODO CR23096 ALL: TPSTAT : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename sabena.igs
-set ref_data {
-DATA : Faulties = 14 ( 0 ) Warnings = 0 ( 0 ) Summary = 14 ( 0 )
-TPSTAT : Faulties = 28 ( 16 ) Warnings = 44 ( 2964 ) Summary = 72 ( 2980 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 2639 ( 2634 ) Summary = 64362 ( 64317 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 2639 ( 2639 ) FreeWire = 1027 ( 1027 ) FreeEdge = 10489 ( 10489 ) SharedEdge = 24209 ( 24190 )
-TOLERANCE : MaxTol = 0.05705560511 ( 0.05705560511 ) AvgTol = 0.0002545958154 ( 0.0002529561285 )
-LABELS : N0Labels = 54 ( 54 ) N1Labels = 10590 ( 24663 ) N2Labels = 0 ( 0 ) TotalLabels = 10644 ( 24717 ) NameLabels = 10644 ( 13414 ) ColorLabels = 10590 ( 24715 ) LayerLabels = 7 ( 15 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 8 ( 8 )
-COLORS : Colors = BLUE1 CYAN1 GREEN GREEN3 MAGENTA1 RED WHITE YELLOW ( BLUE1 CYAN1 GREEN GREEN3 MAGENTA1 RED WHITE YELLOW )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 204 ( 204 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 3039 -max_faults 16
+checkxstat D_First -n0 54 -n1 24663 -n2 0 -total 24717 -withname 13414 -withcolor 24715 -withlayer 15 -centroid 0 -volume 0 -area 0 -colors { BLUE1 CYAN1 GREEN GREEN3 MAGENTA1 RED WHITE YELLOW } -nbcolors 8 -layers { 204 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 2634 -shape 64317
+checkstatshape res_1 -solid 0 -shell 0 -face 2639 -freewire 1027 -freeedge 10489 -sharededge 24190
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.05705560511 -avg 0.0002529561285]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 3039 -max_faults 16
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 14
+checkdoc "tpstat c" -max_warns 44 -max_faults 28
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 54 -n1 24663 -n2 0 -total 24717 -withname 13414 -withcolor 24715 -withlayer 15 -centroid 0 -volume 0 -area 0 -nbcolors 8 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 54 -n1 10590 -n2 0 -total 10644 -withname 10644 -withcolor 10590 -withlayer 7 -centroid 0 -volume 0 -area 0 -colors { BLUE1 CYAN1 GREEN GREEN3 MAGENTA1 RED WHITE YELLOW } -nbcolors 8 -layers { 204 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 2639 -shape 64362 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 2639 -freewire 1027 -freeedge 10489 -sharededge 24209 -max_solid 0 -max_shell 0 -max_face 2639 -max_freewire 1027 -max_freeedge 10489
+checkmaxtol res_2 -tol 0.05705560511 -avg 0.0002545958154 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename waaier_para.igs
-set ref_data {
-DATA : Faulties = 0 ( 1 ) Warnings = 0 ( 1 ) Summary = 0 ( 2 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 40 ( 617 ) Summary = 40 ( 617 )
-CHECKSHAPE : Wires = 2 ( 2 ) Faces = 3 ( 3 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 162 ( 162 ) Summary = 4900 ( 4895 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 162 ( 162 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 2291 ( 2288 )
-TOLERANCE : MaxTol = 0.9221218176 ( 0.9410156556 ) AvgTol = 0.01501963159 ( 0.01437988685 )
-LABELS : N0Labels = 162 ( 162 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 162 ( 162 ) NameLabels = 162 ( 162 ) ColorLabels = 162 ( 162 ) LayerLabels = 162 ( 162 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = MATRAGRAY ( MATRAGRAY )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 1 ( 1 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 1 -max_faults 1
+checkdoc "tpstat c" -max_warns 622 -max_faults 0
+checkxstat D_First -n0 162 -n1 0 -n2 0 -total 162 -withname 162 -withcolor 162 -withlayer 162 -centroid 0 -volume 0 -area 0 -colors { MATRAGRAY } -nbcolors 1 -layers { 1 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 2 -max_faces 3 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 162 -shape 4895
+checkstatshape res_1 -solid 0 -shell 0 -face 162 -freewire 0 -freeedge 0 -sharededge 2288
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.9410156556 -avg 0.01437988685]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 1 -max_faults 1
+checkdoc "tpstat c" -max_warns 622 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 40 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 162 -n1 0 -n2 0 -total 162 -withname 162 -withcolor 162 -withlayer 162 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 162 -n1 0 -n2 0 -total 162 -withname 162 -withcolor 162 -withlayer 162 -centroid 0 -volume 0 -area 0 -colors { MATRAGRAY } -nbcolors 1 -layers { 1 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 2 -max_faces 3 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 2 -max_faces 3 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 162 -shape 4900 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 162 -freewire 0 -freeedge 0 -sharededge 2291 -max_solid 0 -max_shell 0 -max_face 162 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.9221218176 -avg 0.01501963159 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
puts "TODO CR23096 ALL: COLORS : Faulty"
puts "TODO CR23096 ALL: LAYERS : Faulty"
-
set filename So5571b.igs
-set ref_data {
-DATA : Faulties = 0 ( 1 ) Warnings = 0 ( 0 ) Summary = 0 ( 1 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 139 ) Summary = 0 ( 139 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 0 ( 0 ) Summary = 39929 ( 39929 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 0 ( 0 ) FreeWire = 139 ( 139 ) FreeEdge = 19825 ( 19825 ) SharedEdge = 19825 ( 19825 )
-TOLERANCE : MaxTol = 1.000100004e-07 ( 1.000100004e-07 ) AvgTol = 1.000000175e-07 ( 1.000000178e-07 )
-LABELS : N0Labels = 139 ( 139 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 139 ( 139 ) NameLabels = 139 ( 139 ) ColorLabels = 0 ( 139 ) LayerLabels = 0 ( 139 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 1 )
-COLORS : Colors = ( CYAN1 )
-NLAYERS : NLayers = 0 ( 139 )
-LAYERS : Layers = ( 10 100 101 102 103 104 105 106 107 108 109 11 110 111 112 113 114 115 116 117 118 119 12 120 121 122 123 124 125 126 127 128 129 13 130 131 132 133 134 135 136 137 138 139 14 140 15 16 17 18 19 2 20 21 22 23 24 25 26 27 28 29 3 30 31 32 33 34 35 36 37 38 39 4 40 41 42 43 44 45 46 47 48 49 5 50 51 52 53 54 55 56 57 58 59 6 60 61 62 63 64 65 66 67 68 69 7 70 71 72 73 74 75 76 77 78 79 8 80 81 82 83 84 85 86 87 88 89 9 90 91 92 93 94 95 96 97 98 99 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 1
+checkdoc "tpstat c" -max_warns 139 -max_faults 0
+checkxstat D_First -n0 139 -n1 0 -n2 0 -total 139 -withname 139 -withcolor 139 -withlayer 139 -centroid 0 -volume 0 -area 0 -colors { CYAN1 } -nbcolors 1 -layers { 10 100 101 102 103 104 105 106 107 108 109 11 110 111 112 113 114 115 116 117 118 119 12 120 121 122 123 124 125 126 127 128 129 13 130 131 132 133 134 135 136 137 138 139 14 140 15 16 17 18 19 2 20 21 22 23 24 25 26 27 28 29 3 30 31 32 33 34 35 36 37 38 39 4 40 41 42 43 44 45 46 47 48 49 5 50 51 52 53 54 55 56 57 58 59 6 60 61 62 63 64 65 66 67 68 69 7 70 71 72 73 74 75 76 77 78 79 8 80 81 82 83 84 85 86 87 88 89 9 90 91 92 93 94 95 96 97 98 99 } -nblayers 139
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 0 -shape 39929
+checkstatshape res_1 -solid 0 -shell 0 -face 0 -freewire 139 -freeedge 19825 -sharededge 19825
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100004e-07 -avg 1.000000178e-07]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 1
+checkdoc "tpstat c" -max_warns 139 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 139 -n1 0 -n2 0 -total 139 -withname 139 -withcolor 139 -withlayer 139 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 139
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 139 -n1 0 -n2 0 -total 139 -withname 139 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 0 -shape 39929 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 0 -freewire 139 -freeedge 19825 -sharededge 19825 -max_solid 0 -max_shell 0 -max_face 0 -max_freewire 139 -max_freeedge 19825
+checkmaxtol res_2 -tol 1.000100004e-07 -avg 1.000000175e-07 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: DATA : Faulty"
puts "TODO CR23096 ALL: NBSHAPES : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
puts "TODO CR23096 ALL: COLORS : Faulty"
puts "TODO CR23096 ALL: LAYERS : Faulty"
-
set filename UKI60028-1.igs
-set ref_data {
-DATA : Faulties = 4 ( 0 ) Warnings = 0 ( 0 ) Summary = 4 ( 0 )
-TPSTAT : Faulties = 8 ( 150 ) Warnings = 42 ( 788 ) Summary = 50 ( 938 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 159 ( 159 ) Summary = 7579 ( 7684 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 159 ( 159 ) FreeWire = 189 ( 284 ) FreeEdge = 1726 ( 1726 ) SharedEdge = 3033 ( 3035 )
-TOLERANCE : MaxTol = 0.6023944505 ( 0.6023945025 ) AvgTol = 0.007298261126 ( 0.008822197287 )
-LABELS : N0Labels = 8 ( 11 ) N1Labels = 949 ( 1809 ) N2Labels = 0 ( 0 ) TotalLabels = 957 ( 1820 ) NameLabels = 955 ( 1263 ) ColorLabels = 949 ( 1807 ) LayerLabels = 917 ( 1774 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 12 ( 14 )
-COLORS : Colors = BLUE1 CHOCOLATE2 DARKGOLDENROD4 DEEPSKYBLUE2 GOLD4 GREEN KHAKI1 KHAKI2 LEMONCHIFFON1 RED WHITE YELLOW ( BLUE1 CHOCOLATE2 DARKGOLDENROD4 DEEPSKYBLUE2 FIREBRICK4 GOLD4 GREEN KHAKI1 KHAKI2 LEMONCHIFFON1 RED TURQUOISE4 WHITE YELLOW )
-NLAYERS : NLayers = 10 ( 13 )
-LAYERS : Layers = 12 13 23 249 252 50 52 54 60 71 ( 12 13 23 244 246 249 252 50 52 54 60 70 71 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 787 -max_faults 150
+checkxstat D_First -n0 11 -n1 1809 -n2 0 -total 1820 -withname 1263 -withcolor 1807 -withlayer 1774 -centroid 0 -volume 0 -area 0 -colors { BLUE1 CHOCOLATE2 DARKGOLDENROD4 DEEPSKYBLUE2 FIREBRICK4 GOLD4 GREEN KHAKI1 KHAKI2 LEMONCHIFFON1 RED TURQUOISE4 WHITE YELLOW } -nbcolors 14 -layers { 12 13 23 244 246 249 252 50 52 54 60 70 71 } -nblayers 13
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 159 -shape 7684
+checkstatshape res_1 -solid 0 -shell 0 -face 159 -freewire 284 -freeedge 1726 -sharededge 3035
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.6023945025 -avg 0.008822197287]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 787 -max_faults 150
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 4
+checkdoc "tpstat c" -max_warns 43 -max_faults 8
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 11 -n1 1809 -n2 0 -total 1820 -withname 1263 -withcolor 1807 -withlayer 1774 -centroid 0 -volume 0 -area 0 -nbcolors 14 -nblayers 13
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 8 -n1 949 -n2 0 -total 957 -withname 955 -withcolor 949 -withlayer 917 -centroid 0 -volume 0 -area 0 -colors { BLUE1 CHOCOLATE2 DARKGOLDENROD4 DEEPSKYBLUE2 GOLD4 GREEN KHAKI1 KHAKI2 LEMONCHIFFON1 RED WHITE YELLOW } -nbcolors 12 -layers { 12 13 23 249 252 50 52 54 60 71 } -nblayers 10
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 159 -shape 7579 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 159 -freewire 189 -freeedge 1726 -sharededge 3033 -max_solid 0 -max_shell 0 -max_face 159 -max_freewire 284 -max_freeedge 1726
+checkmaxtol res_2 -tol 0.6023944505 -avg 0.007298261126 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: DATA : Faulty"
puts "TODO CR23096 ALL: NBSHAPES : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
puts "TODO CR23096 ALL: COLORS : Faulty"
puts "TODO CR23096 ALL: LAYERS : Faulty"
-
set filename UKI60028-2.igs
-set ref_data {
-DATA : Faulties = 8 ( 0 ) Warnings = 0 ( 0 ) Summary = 8 ( 0 )
-TPSTAT : Faulties = 16 ( 149 ) Warnings = 60 ( 1010 ) Summary = 76 ( 1159 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 1 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 124 ( 124 ) Summary = 7690 ( 7735 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 124 ( 124 ) FreeWire = 219 ( 254 ) FreeEdge = 1870 ( 1870 ) SharedEdge = 3105 ( 3108 )
-TOLERANCE : MaxTol = 0.9970503224 ( 0.9970502696 ) AvgTol = 0.01722883731 ( 0.02186287201 )
-LABELS : N0Labels = 9 ( 9 ) N1Labels = 896 ( 1691 ) N2Labels = 0 ( 0 ) TotalLabels = 905 ( 1700 ) NameLabels = 905 ( 1233 ) ColorLabels = 896 ( 1692 ) LayerLabels = 864 ( 1659 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 6 ( 7 )
-COLORS : Colors = BLUE1 LEMONCHIFFON1 RED RED4 WHITE YELLOW ( BLUE1 GREEN LEMONCHIFFON1 RED RED4 WHITE YELLOW )
-NLAYERS : NLayers = 12 ( 16 )
-LAYERS : Layers = 11 12 13 20 249 252 50 52 54 55 60 71 ( 10 11 12 13 20 246 249 252 50 52 54 55 60 65 70 71 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1010 -max_faults 149
+checkxstat D_First -n0 9 -n1 1691 -n2 0 -total 1700 -withname 1233 -withcolor 1692 -withlayer 1659 -centroid 0 -volume 0 -area 0 -colors { BLUE1 GREEN LEMONCHIFFON1 RED RED4 WHITE YELLOW } -nbcolors 7 -layers { 10 11 12 13 20 246 249 252 50 52 54 55 60 65 70 71 } -nblayers 16
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 1 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 124 -shape 7735
+checkstatshape res_1 -solid 0 -shell 0 -face 124 -freewire 254 -freeedge 1870 -sharededge 3108
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.9970502696 -avg 0.02186287201]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1010 -max_faults 149
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 8
+checkdoc "tpstat c" -max_warns 60 -max_faults 16
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 9 -n1 1691 -n2 0 -total 1700 -withname 1233 -withcolor 1692 -withlayer 1659 -centroid 0 -volume 0 -area 0 -nbcolors 7 -nblayers 16
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 9 -n1 896 -n2 0 -total 905 -withname 905 -withcolor 896 -withlayer 864 -centroid 0 -volume 0 -area 0 -colors { BLUE1 LEMONCHIFFON1 RED RED4 WHITE YELLOW } -nbcolors 6 -layers { 11 12 13 20 249 252 50 52 54 55 60 71 } -nblayers 12
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 1 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 124 -shape 7690 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 124 -freewire 219 -freeedge 1870 -sharededge 3105 -max_solid 0 -max_shell 0 -max_face 124 -max_freewire 254 -max_freeedge 1870
+checkmaxtol res_2 -tol 0.9970503224 -avg 0.01722883731 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: DATA : Faulty"
puts "TODO CR23096 ALL: TPSTAT : Faulty"
puts "TODO CR23096 ALL: NBSHAPES : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
puts "TODO CR23096 ALL: COLORS : Faulty"
-set LinuxDiff 1
set filename UKI60107-3.igs
-set ref_data {
-DATA : Faulties = 1 ( 0 ) Warnings = 0 ( 0 ) Summary = 1 ( 0 )
-TPSTAT : Faulties = 2 ( 0 ) Warnings = 20 ( 331 ) Summary = 22 ( 331 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 149 ( 149 ) Summary = 2607 ( 2609 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 149 ( 149 ) FreeWire = 14 ( 14 ) FreeEdge = 63 ( 63 ) SharedEdge = 1138 ( 1140 )
-TOLERANCE : MaxTol = 0.7457094468 ( 0.7457094468 ) AvgTol = 0.02275001022 ( 0.02285180898 )
-LABELS : N0Labels = 2 ( 2 ) N1Labels = 164 ( 766 ) N2Labels = 0 ( 0 ) TotalLabels = 166 ( 768 ) NameLabels = 164 ( 259 ) ColorLabels = 164 ( 766 ) LayerLabels = 162 ( 764 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 2 ( 3 )
-COLORS : Colors = MAGENTA1 WHITE ( CYAN1 MAGENTA1 WHITE )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 4 ( 4 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 335 -max_faults 0
+checkxstat D_First -n0 2 -n1 766 -n2 0 -total 768 -withname 259 -withcolor 766 -withlayer 764 -centroid 0 -volume 0 -area 0 -colors { CYAN1 MAGENTA1 WHITE } -nbcolors 3 -layers { 4 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 149 -shape 2609
+checkstatshape res_1 -solid 0 -shell 0 -face 149 -freewire 14 -freeedge 63 -sharededge 1140
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.7457094468 -avg 0.02285180898]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 335 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 1
+checkdoc "tpstat c" -max_warns 20 -max_faults 2
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 2 -n1 766 -n2 0 -total 768 -withname 259 -withcolor 766 -withlayer 764 -centroid 0 -volume 0 -area 0 -nbcolors 3 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 2 -n1 164 -n2 0 -total 166 -withname 164 -withcolor 164 -withlayer 162 -centroid 0 -volume 0 -area 0 -colors { MAGENTA1 WHITE } -nbcolors 2 -layers { 4 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 149 -shape 2607 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 149 -freewire 14 -freeedge 63 -sharededge 1138 -max_solid 0 -max_shell 0 -max_face 149 -max_freewire 14 -max_freeedge 63
+checkmaxtol res_2 -tol 0.7457094468 -avg 0.02275001022 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
puts "TODO CR23096 ALL: COLORS : Faulty"
-
set filename UKI60302.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 93 ) Warnings = 4 ( 129 ) Summary = 4 ( 222 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 4 ( 4 ) Summary = 438 ( 240 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 4 ( 4 ) FreeWire = 7 ( 7 ) FreeEdge = 135 ( 135 ) SharedEdge = 151 ( 84 )
-TOLERANCE : MaxTol = 1e-007 ( 1.000100002e-007 ) AvgTol = 1e-007 ( 1.00000086e-007 )
-LABELS : N0Labels = 5 ( 12 ) N1Labels = 106 ( 70 ) N2Labels = 0 ( 0 ) TotalLabels = 111 ( 82 ) NameLabels = 28 ( 82 ) ColorLabels = 106 ( 50 ) LayerLabels = 106 ( 49 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 4 ( 5 )
-COLORS : Colors = GOLD3 GREEN LIGHTSEAGREEN YELLOW ( GOLD3 GREEN LIGHTSEAGREEN RED YELLOW )
-NLAYERS : NLayers = 3 ( 3 )
-LAYERS : Layers = 201 254 255 ( 201 254 255 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 129 -max_faults 93
+checkxstat D_First -n0 12 -n1 70 -n2 0 -total 82 -withname 82 -withcolor 50 -withlayer 49 -centroid 0 -volume 0 -area 0 -colors { GOLD3 GREEN LIGHTSEAGREEN RED YELLOW } -nbcolors 5 -layers { 201 254 255 } -nblayers 3
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 4 -shape 240
+checkstatshape res_1 -solid 0 -shell 0 -face 4 -freewire 7 -freeedge 135 -sharededge 84
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100002e-007 -avg 1.00000086e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 129 -max_faults 93
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 12 -n1 70 -n2 0 -total 82 -withname 82 -withcolor 50 -withlayer 49 -centroid 0 -volume 0 -area 0 -nbcolors 5 -nblayers 3
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 5 -n1 106 -n2 0 -total 111 -withname 28 -withcolor 106 -withlayer 106 -centroid 0 -volume 0 -area 0 -colors { GOLD3 GREEN LIGHTSEAGREEN YELLOW } -nbcolors 4 -layers { 201 254 255 } -nblayers 3
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 4 -shape 438 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 4 -freewire 7 -freeedge 135 -sharededge 151 -max_solid 0 -max_shell 0 -max_face 4 -max_freewire 7 -max_freeedge 135
+checkmaxtol res_2 -tol 1e-007 -avg 1e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
puts "TODO CR23096 ALL: COLORS : Faulty"
puts "TODO CR23096 ALL: LAYERS : Faulty"
-
set filename UKI60876.igs
-set ref_data {
-DATA : Faulties = 0 ( 7 ) Warnings = 0 ( 0 ) Summary = 0 ( 7 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 128 ( 287 ) Summary = 128 ( 287 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 373 ( 373 ) Summary = 8508 ( 8508 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 373 ( 373 ) FreeWire = 1 ( 1 ) FreeEdge = 1211 ( 1211 ) SharedEdge = 3267 ( 3267 )
-TOLERANCE : MaxTol = 0.5291749398 ( 0.5291749268 ) AvgTol = 0.008496038363 ( 0.008496053622 )
-LABELS : N0Labels = 1597 ( 1597 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1597 ( 1597 ) NameLabels = 1597 ( 1597 ) ColorLabels = 1580 ( 1597 ) LayerLabels = 1580 ( 1597 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 11 ( 12 )
-COLORS : Colors = BURLYWOOD1 CHARTREUSE CYAN1 DARKORANGE GREEN KHAKI1 LIGHTSALMON1 LIGHTSTEELBLUE2 ORCHID1 WHITE YELLOW ( BURLYWOOD1 CHARTREUSE CYAN1 DARKORANGE DEEPSKYBLUE1 GREEN KHAKI1 LIGHTSALMON1 LIGHTSTEELBLUE2 ORCHID1 WHITE YELLOW )
-NLAYERS : NLayers = 17 ( 19 )
-LAYERS : Layers = 11 12 130 14 15 16 17 18 19 21 62 63 65 66 68 69 75 ( 11 12 130 14 15 16 17 18 19 21 61 62 63 64 65 66 68 69 75 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 7
+checkdoc "tpstat c" -max_warns 287 -max_faults 0
+checkxstat D_First -n0 1597 -n1 0 -n2 0 -total 1597 -withname 1597 -withcolor 1597 -withlayer 1597 -centroid 0 -volume 0 -area 0 -colors { BURLYWOOD1 CHARTREUSE CYAN1 DARKORANGE DEEPSKYBLUE1 GREEN KHAKI1 LIGHTSALMON1 LIGHTSTEELBLUE2 ORCHID1 WHITE YELLOW } -nbcolors 12 -layers { 11 12 130 14 15 16 17 18 19 21 61 62 63 64 65 66 68 69 75 } -nblayers 19
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 373 -shape 8508
+checkstatshape res_1 -solid 0 -shell 0 -face 373 -freewire 1 -freeedge 1211 -sharededge 3267
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.5291749268 -avg 0.008496053622]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 7
+checkdoc "tpstat c" -max_warns 287 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 128 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1597 -n1 0 -n2 0 -total 1597 -withname 1597 -withcolor 1597 -withlayer 1597 -centroid 0 -volume 0 -area 0 -nbcolors 12 -nblayers 19
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1597 -n1 0 -n2 0 -total 1597 -withname 1597 -withcolor 1580 -withlayer 1580 -centroid 0 -volume 0 -area 0 -colors { BURLYWOOD1 CHARTREUSE CYAN1 DARKORANGE GREEN KHAKI1 LIGHTSALMON1 LIGHTSTEELBLUE2 ORCHID1 WHITE YELLOW } -nbcolors 11 -layers { 11 12 130 14 15 16 17 18 19 21 62 63 65 66 68 69 75 } -nblayers 17
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 373 -shape 8508 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 373 -freewire 1 -freeedge 1211 -sharededge 3267 -max_solid 0 -max_shell 0 -max_face 373 -max_freewire 1 -max_freeedge 1211
+checkmaxtol res_2 -tol 0.5291749398 -avg 0.008496038363 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
puts "TODO CR23096 ALL: COLORS : Faulty"
puts "TODO CR23096 ALL: LAYERS : Faulty"
-
set filename WingPts.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 1 ( 1 ) Summary = 5721 ( 5721 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 1 ( 1 ) FreeWire = 0 ( 0 ) FreeEdge = 3 ( 3 ) SharedEdge = 7 ( 7 )
-TOLERANCE : MaxTol = 1e-007 ( 1e-007 ) AvgTol = 1e-007 ( 1e-007 )
-LABELS : N0Labels = 5705 ( 5705 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 5705 ( 5705 ) NameLabels = 5705 ( 5705 ) ColorLabels = 4 ( 5705 ) LayerLabels = 0 ( 5700 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 2 ( 3 )
-COLORS : Colors = BLUE1 GREEN ( BLUE1 GREEN RED )
-NLAYERS : NLayers = 0 ( 1 )
-LAYERS : Layers = ( 1 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 5705 -n1 0 -n2 0 -total 5705 -withname 5705 -withcolor 5705 -withlayer 5700 -centroid 0 -volume 0 -area 0 -colors { BLUE1 GREEN RED } -nbcolors 3 -layers { 1 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 1 -shape 5721
+checkstatshape res_1 -solid 0 -shell 0 -face 1 -freewire 0 -freeedge 3 -sharededge 7
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-007 -avg 1e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 5705 -n1 0 -n2 0 -total 5705 -withname 5705 -withcolor 5705 -withlayer 5700 -centroid 0 -volume 0 -area 0 -nbcolors 3 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 5705 -n1 0 -n2 0 -total 5705 -withname 5705 -withcolor 4 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 GREEN } -nbcolors 2 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 1 -shape 5721 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 1 -freewire 0 -freeedge 3 -sharededge 7 -max_solid 0 -max_shell 0 -max_face 1 -max_freewire 0 -max_freeedge 3
+checkmaxtol res_2 -tol 1e-007 -avg 1e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: NBSHAPES : Faulty"
puts "TODO CR23096 ALL: TOLERANCE : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
puts "TODO CR23096 ALL: COLORS : Faulty"
-puts "TODO CR25013 ALL: Error : 3 differences with reference data found"
+puts "TODO CR25013 ALL: Error : is WRONG because number of SHAPE entities in shape"
+puts "TODO CR25013 ALL: STATSHAPE : Faulty ref number of shared edges in command statshape"
-set LinuxDiff 4
-set LinuxFaulties {STATSHAPE}
set filename coque-sup.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 3 ) Warnings = 274 ( 4465 ) Summary = 274 ( 4468 )
-CHECKSHAPE : Wires = 2 ( 2 ) Faces = 3 ( 3 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 1628 ( 1628 ) Summary = 39231 ( 39275 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 1628 ( 1628 ) FreeWire = 22 ( 26 ) FreeEdge = 135 ( 135 ) SharedEdge = 17934 ( 17947 )
-TOLERANCE : MaxTol = 4.337400808e+088 ( 8.082392835e+086 ) AvgTol = 2.040579288e+085 ( 5.099401401e+083 )
-LABELS : N0Labels = 6 ( 6 ) N1Labels = 1643 ( 9621 ) N2Labels = 0 ( 0 ) TotalLabels = 1649 ( 9627 ) NameLabels = 1649 ( 2891 ) ColorLabels = 1645 ( 9626 ) LayerLabels = 489 ( 3997 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 4 ( 5 )
-COLORS : Colors = BLUE1 CYAN1 GOLD3 GREEN ( BLUE1 CYAN1 GOLD3 GREEN YELLOW )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 1 ( 1 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4570 -max_faults 2
+checkxstat D_First -n0 6 -n1 9621 -n2 0 -total 9627 -withname 2891 -withcolor 9626 -withlayer 3997 -centroid 0 -volume 0 -area 0 -colors { BLUE1 CYAN1 GOLD3 GREEN YELLOW } -nbcolors 5 -layers { 1 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 2 -max_faces 3 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 1628 -shape 39275
+checkstatshape res_1 -solid 0 -shell 0 -face 1628 -freewire 26 -freeedge 135 -sharededge 17947
+set max_tol_res_1 [checkmaxtol res_1 -tol 8.082392835e+086 -avg 5.099401401e+083]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4570 -max_faults 2
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1956 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 6 -n1 9621 -n2 0 -total 9627 -withname 2891 -withcolor 9626 -withlayer 3997 -centroid 0 -volume 0 -area 0 -nbcolors 5 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 6 -n1 1643 -n2 0 -total 1649 -withname 1649 -withcolor 1645 -withlayer 489 -centroid 0 -volume 0 -area 0 -colors { BLUE1 CYAN1 GOLD3 GREEN } -nbcolors 4 -layers { 1 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 2 -max_faces 3 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 2 -max_faces 3 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 1628 -shape 39231 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 1628 -freewire 22 -freeedge 135 -sharededge 17934 -max_solid 0 -max_shell 0 -max_face 1628 -max_freewire 26 -max_freeedge 135
+checkmaxtol res_2 -tol 4.337400808e+088 -avg 2.040579288e+085 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: NBSHAPES : Faulty"
puts "TODO CR23096 ALL: STATSHAPE : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
puts "TODO CR23096 ALL: COLORS : Faulty"
puts "TODO CR23096 ALL: LAYERS : Faulty"
-
set filename himm03.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 1 ) Summary = 0 ( 1 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 330 ( 1385 ) Summary = 330 ( 1385 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 152 ( 152 ) Summary = 11567 ( 11582 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 152 ( 152 ) FreeWire = 305 ( 441 ) FreeEdge = 2665 ( 2588 ) SharedEdge = 5140 ( 5064 )
-TOLERANCE : MaxTol = 0.9892459055 ( 0.9892459128 ) AvgTol = 0.004744883571 ( 0.01316570987 )
-LABELS : N0Labels = 10 ( 10 ) N1Labels = 553 ( 1961 ) N2Labels = 0 ( 0 ) TotalLabels = 563 ( 1971 ) NameLabels = 563 ( 909 ) ColorLabels = 553 ( 1970 ) LayerLabels = 533 ( 1938 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 6 ( 8 )
-COLORS : Colors = BLACK BLUE1 GREEN RED WHITE YELLOW ( BLACK BLUE1 CYAN1 GREEN MAGENTA1 RED WHITE YELLOW )
-NLAYERS : NLayers = 11 ( 13 )
-LAYERS : Layers = 1 101 103 2 3 32 4 52 61 70 77 ( 1 101 102 103 2 3 30 32 4 52 61 70 77 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 1392 -max_faults 0
+checkxstat D_First -n0 10 -n1 1961 -n2 0 -total 1971 -withname 909 -withcolor 1970 -withlayer 1938 -centroid 0 -volume 0 -area 0 -colors { BLACK BLUE1 CYAN1 GREEN MAGENTA1 RED WHITE YELLOW } -nbcolors 8 -layers { 1 101 102 103 2 3 30 32 4 52 61 70 77 } -nblayers 13
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 152 -shape 11582
+checkstatshape res_1 -solid 0 -shell 0 -face 152 -freewire 441 -freeedge 2588 -sharededge 5064
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.9892459128 -avg 0.01316570987]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 1392 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 330 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 10 -n1 1961 -n2 0 -total 1971 -withname 909 -withcolor 1970 -withlayer 1938 -centroid 0 -volume 0 -area 0 -nbcolors 8 -nblayers 13
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 10 -n1 553 -n2 0 -total 563 -withname 563 -withcolor 553 -withlayer 533 -centroid 0 -volume 0 -area 0 -colors { BLACK BLUE1 GREEN RED WHITE YELLOW } -nbcolors 6 -layers { 1 101 103 2 3 32 4 52 61 70 77 } -nblayers 11
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 152 -shape 11567 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 152 -freewire 305 -freeedge 2665 -sharededge 5140 -max_solid 0 -max_shell 0 -max_face 152 -max_freewire 441 -max_freeedge 2588
+checkmaxtol res_2 -tol 0.9892459055 -avg 0.004744883571 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
puts "TODO CR23096 ALL: COLORS : Faulty"
puts "TODO CR23096 ALL: LAYERS : Faulty"
-
set filename igsBF1.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 10 ( 24 ) Summary = 10 ( 24 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 12 ( 12 ) Summary = 1589 ( 1589 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 12 ( 12 ) FreeWire = 0 ( 0 ) FreeEdge = 199 ( 199 ) SharedEdge = 687 ( 687 )
-TOLERANCE : MaxTol = 1e-005 ( 1e-005 ) AvgTol = 3.090240818e-007 ( 4.295805207e-006 )
-LABELS : N0Labels = 212 ( 212 ) N1Labels = 0 ( 72 ) N2Labels = 0 ( 0 ) TotalLabels = 212 ( 284 ) NameLabels = 212 ( 212 ) ColorLabels = 211 ( 284 ) LayerLabels = 211 ( 284 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 4 ( 5 )
-COLORS : Colors = BLUE1 CYAN1 GREEN WHITE ( BLUE1 CYAN1 GREEN MAGENTA1 WHITE )
-NLAYERS : NLayers = 1 ( 2 )
-LAYERS : Layers = 1 ( 1 220 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 24 -max_faults 0
+checkxstat D_First -n0 212 -n1 72 -n2 0 -total 284 -withname 212 -withcolor 284 -withlayer 284 -centroid 0 -volume 0 -area 0 -colors { BLUE1 CYAN1 GREEN MAGENTA1 WHITE } -nbcolors 5 -layers { 1 220 } -nblayers 2
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 12 -shape 1589
+checkstatshape res_1 -solid 0 -shell 0 -face 12 -freewire 0 -freeedge 199 -sharededge 687
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-005 -avg 4.295805207e-006]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 24 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 10 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 212 -n1 72 -n2 0 -total 284 -withname 212 -withcolor 284 -withlayer 284 -centroid 0 -volume 0 -area 0 -nbcolors 5 -nblayers 2
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 212 -n1 0 -n2 0 -total 212 -withname 212 -withcolor 211 -withlayer 211 -centroid 0 -volume 0 -area 0 -colors { BLUE1 CYAN1 GREEN WHITE } -nbcolors 4 -layers { 1 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 12 -shape 1589 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 12 -freewire 0 -freeedge 199 -sharededge 687 -max_solid 0 -max_shell 0 -max_face 12 -max_freewire 0 -max_freeedge 199
+checkmaxtol res_2 -tol 1e-005 -avg 3.090240818e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: NBSHAPES : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
puts "TODO CR23096 ALL: COLORS : Faulty"
puts "TODO CR23096 ALL: LAYERS : Faulty"
-
set filename ims002.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 20 ( 257 ) Summary = 20 ( 257 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 78 ( 78 ) Summary = 5036 ( 5295 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 78 ( 78 ) FreeWire = 75 ( 334 ) FreeEdge = 1251 ( 1251 ) SharedEdge = 1965 ( 1965 )
-TOLERANCE : MaxTol = 0.2578298329 ( 0.2578045038 ) AvgTol = 0.001358353951 ( 0.00164678188 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 880 ( 1446 ) N2Labels = 0 ( 0 ) TotalLabels = 881 ( 1447 ) NameLabels = 881 ( 1008 ) ColorLabels = 880 ( 1446 ) LayerLabels = 858 ( 1419 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 5 ( 7 )
-COLORS : Colors = DODGERBLUE2 GREEN MAGENTA3 TURQUOISE2 WHITE ( DODGERBLUE2 GRAY80 GREEN MAGENTA3 TURQUOISE2 WHITE YELLOW3 )
-NLAYERS : NLayers = 8 ( 10 )
-LAYERS : Layers = 1 10 12 13 16 19 4 5 ( 1 10 12 13 16 19 191 210 4 5 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 413 -max_faults 0
+checkdoc "tpstat c" -max_warns 268 -max_faults 0
+checkxstat D_First -n0 1 -n1 1446 -n2 0 -total 1447 -withname 1008 -withcolor 1446 -withlayer 1419 -centroid 0 -volume 0 -area 0 -colors { DODGERBLUE2 GRAY80 GREEN MAGENTA3 TURQUOISE2 WHITE YELLOW3 } -nbcolors 7 -layers { 1 10 12 13 16 19 191 210 4 5 } -nblayers 10
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 78 -shape 5295
+checkstatshape res_1 -solid 0 -shell 0 -face 78 -freewire 334 -freeedge 1251 -sharededge 1965
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.2578045038 -avg 0.00164678188]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 413 -max_faults 0
+checkdoc "tpstat c" -max_warns 268 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 19 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 1446 -n2 0 -total 1447 -withname 1008 -withcolor 1446 -withlayer 1419 -centroid 0 -volume 0 -area 0 -nbcolors 7 -nblayers 10
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 880 -n2 0 -total 881 -withname 881 -withcolor 880 -withlayer 858 -centroid 0 -volume 0 -area 0 -colors { DODGERBLUE2 GREEN MAGENTA3 TURQUOISE2 WHITE } -nbcolors 5 -layers { 1 10 12 13 16 19 4 5 } -nblayers 8
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 78 -shape 5036 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 78 -freewire 75 -freeedge 1251 -sharededge 1965 -max_solid 0 -max_shell 0 -max_face 78 -max_freewire 334 -max_freeedge 1251
+checkmaxtol res_2 -tol 0.2578298329 -avg 0.001358353951 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
puts "TODO CR23096 ALL: COLORS : Faulty"
puts "TODO CR23096 ALL: LAYERS : Faulty"
-
set filename ims004.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 95 ) Summary = 0 ( 95 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 96 ( 96 ) Summary = 2333 ( 2333 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 96 ( 96 ) FreeWire = 14 ( 14 ) FreeEdge = 360 ( 360 ) SharedEdge = 871 ( 871 )
-TOLERANCE : MaxTol = 0.9808242672 ( 0.9808242374 ) AvgTol = 0.004966469755 ( 0.004962254462 )
-LABELS : N0Labels = 4 ( 4 ) N1Labels = 422 ( 732 ) N2Labels = 0 ( 0 ) TotalLabels = 426 ( 736 ) NameLabels = 426 ( 528 ) ColorLabels = 422 ( 732 ) LayerLabels = 422 ( 732 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 6 ( 8 )
-COLORS : Colors = BLUE1 GREEN3 RED TURQUOISE1 WHITE YELLOW ( BLUE1 GREEN3 GREEN4 MEDIUMORCHID RED TURQUOISE1 WHITE YELLOW )
-NLAYERS : NLayers = 11 ( 12 )
-LAYERS : Layers = 101 102 103 104 110 130 190 40 41 42 43 ( 101 102 103 104 110 130 185 190 40 41 42 43 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 111 -max_faults 0
+checkxstat D_First -n0 4 -n1 732 -n2 0 -total 736 -withname 528 -withcolor 732 -withlayer 732 -centroid 0 -volume 0 -area 0 -colors { BLUE1 GREEN3 GREEN4 MEDIUMORCHID RED TURQUOISE1 WHITE YELLOW } -nbcolors 8 -layers { 101 102 103 104 110 130 185 190 40 41 42 43 } -nblayers 12
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 96 -shape 2333
+checkstatshape res_1 -solid 0 -shell 0 -face 96 -freewire 14 -freeedge 360 -sharededge 871
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.9808242374 -avg 0.004962254462]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 111 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 4 -n1 732 -n2 0 -total 736 -withname 528 -withcolor 732 -withlayer 732 -centroid 0 -volume 0 -area 0 -nbcolors 8 -nblayers 12
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 4 -n1 422 -n2 0 -total 426 -withname 426 -withcolor 422 -withlayer 422 -centroid 0 -volume 0 -area 0 -colors { BLUE1 GREEN3 RED TURQUOISE1 WHITE YELLOW } -nbcolors 6 -layers { 101 102 103 104 110 130 190 40 41 42 43 } -nblayers 11
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 96 -shape 2333 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 96 -freewire 14 -freeedge 360 -sharededge 871 -max_solid 0 -max_shell 0 -max_face 96 -max_freewire 14 -max_freeedge 360
+checkmaxtol res_2 -tol 0.9808242672 -avg 0.004966469755 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: DATA : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
puts "TODO CR23096 ALL: COLORS : Faulty"
-
set filename ims013.igs
-set ref_data {
-DATA : Faulties = 19 ( 0 ) Warnings = 0 ( 0 ) Summary = 19 ( 0 )
-TPSTAT : Faulties = 38 ( 160 ) Warnings = 0 ( 780 ) Summary = 38 ( 940 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 854 ( 702 ) Summary = 25375 ( 23837 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 854 ( 854 ) FreeWire = 9 ( 31 ) FreeEdge = 3865 ( 3865 ) SharedEdge = 9820 ( 9202 )
-TOLERANCE : MaxTol = 0.9589015104 ( 0.9589015104 ) AvgTol = 0.01827507861 ( 0.01834335655 )
-LABELS : N0Labels = 33 ( 33 ) N1Labels = 4502 ( 6687 ) N2Labels = 0 ( 0 ) TotalLabels = 4535 ( 6720 ) NameLabels = 4535 ( 4624 ) ColorLabels = 4522 ( 6707 ) LayerLabels = 4281 ( 6430 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 8 ( 9 )
-COLORS : Colors = BLUE1 CYAN1 GREEN GREEN3 MAGENTA1 RED WHITE YELLOW ( BLUE1 CYAN1 GRAY80 GREEN GREEN3 MAGENTA1 RED WHITE YELLOW )
-NLAYERS : NLayers = 6 ( 6 )
-LAYERS : Layers = 10 200 201 3 40 45 ( 10 200 201 3 40 45 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 780 -max_faults 160
+checkxstat D_First -n0 33 -n1 6687 -n2 0 -total 6720 -withname 4624 -withcolor 6707 -withlayer 6430 -centroid 0 -volume 0 -area 0 -colors { BLUE1 CYAN1 GRAY80 GREEN GREEN3 MAGENTA1 RED WHITE YELLOW } -nbcolors 9 -layers { 10 200 201 3 40 45 } -nblayers 6
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 702 -shape 23837
+checkstatshape res_1 -solid 0 -shell 0 -face 854 -freewire 31 -freeedge 3865 -sharededge 9202
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.9589015104 -avg 0.01834335655]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 780 -max_faults 160
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 19
+checkdoc "tpstat c" -max_warns 24 -max_faults 38
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 33 -n1 6687 -n2 0 -total 6720 -withname 4624 -withcolor 6707 -withlayer 6430 -centroid 0 -volume 0 -area 0 -nbcolors 9 -nblayers 6
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 33 -n1 4502 -n2 0 -total 4535 -withname 4535 -withcolor 4522 -withlayer 4281 -centroid 0 -volume 0 -area 0 -colors { BLUE1 CYAN1 GREEN GREEN3 MAGENTA1 RED WHITE YELLOW } -nbcolors 8 -layers { 10 200 201 3 40 45 } -nblayers 6
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 854 -shape 25375 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 854 -freewire 9 -freeedge 3865 -sharededge 9820 -max_solid 0 -max_shell 0 -max_face 854 -max_freewire 31 -max_freeedge 3865
+checkmaxtol res_2 -tol 0.9589015104 -avg 0.01827507861 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: NBSHAPES : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
puts "TODO CR23096 ALL: COLORS : Faulty"
puts "TODO CR23096 ALL: LAYERS : Faulty"
-
set filename ims015.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 197 ) Summary = 0 ( 197 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 49 ( 49 ) Summary = 14672 ( 14688 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 49 ( 49 ) FreeWire = 146 ( 146 ) FreeEdge = 6582 ( 6582 ) SharedEdge = 7155 ( 7155 )
-TOLERANCE : MaxTol = 0.03734358068 ( 0.03734358027 ) AvgTol = 0.0003212231779 ( 0.000320199395 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 158 ( 421 ) N2Labels = 0 ( 0 ) TotalLabels = 159 ( 422 ) NameLabels = 159 ( 334 ) ColorLabels = 158 ( 421 ) LayerLabels = 0 ( 96 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 2 ( 4 )
-COLORS : Colors = MAGENTA1 YELLOW ( BLUE1 MAGENTA1 RED YELLOW )
-NLAYERS : NLayers = 0 ( 1 )
-LAYERS : Layers = ( 60 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 99 -max_faults 0
+checkdoc "tpstat c" -max_warns 197 -max_faults 0
+checkxstat D_First -n0 1 -n1 421 -n2 0 -total 422 -withname 334 -withcolor 421 -withlayer 96 -centroid 0 -volume 0 -area 0 -colors { BLUE1 MAGENTA1 RED YELLOW } -nbcolors 4 -layers { 60 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 49 -shape 14688
+checkstatshape res_1 -solid 0 -shell 0 -face 49 -freewire 146 -freeedge 6582 -sharededge 7155
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.03734358027 -avg 0.000320199395]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 99 -max_faults 0
+checkdoc "tpstat c" -max_warns 197 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 421 -n2 0 -total 422 -withname 334 -withcolor 421 -withlayer 96 -centroid 0 -volume 0 -area 0 -nbcolors 4 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 158 -n2 0 -total 159 -withname 159 -withcolor 158 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { MAGENTA1 YELLOW } -nbcolors 2 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 49 -shape 14672 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 49 -freewire 146 -freeedge 6582 -sharededge 7155 -max_solid 0 -max_shell 0 -max_face 49 -max_freewire 146 -max_freeedge 6582
+checkmaxtol res_2 -tol 0.03734358068 -avg 0.0003212231779 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
puts "TODO CR23096 ALL: COLORS : Faulty"
puts "TODO CR23096 ALL: CHECKSHAPE : Faulty"
-
set filename ims016.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 120 ( 402 ) Summary = 120 ( 402 )
-CHECKSHAPE : Wires = 4 ( 0 ) Faces = 2 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 138 ( 138 ) Summary = 10599 ( 10569 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 138 ( 138 ) FreeWire = 6 ( 6 ) FreeEdge = 353 ( 353 ) SharedEdge = 4953 ( 4953 )
-TOLERANCE : MaxTol = 0.2092687841 ( 0.2092687804 ) AvgTol = 0.0009010196362 ( 0.0009882759183 )
-LABELS : N0Labels = 503 ( 503 ) N1Labels = 0 ( 200 ) N2Labels = 0 ( 0 ) TotalLabels = 503 ( 703 ) NameLabels = 503 ( 503 ) ColorLabels = 470 ( 703 ) LayerLabels = 313 ( 344 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 6 ( 7 )
-COLORS : Colors = CYAN1 GREEN MAGENTA1 RED WHITE YELLOW ( BLACK CYAN1 GREEN MAGENTA1 RED WHITE YELLOW )
-NLAYERS : NLayers = 8 ( 8 )
-LAYERS : Layers = 1 101 102 103 104 106 107 200 ( 1 101 102 103 104 106 107 200 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 402 -max_faults 0
+checkxstat D_First -n0 503 -n1 200 -n2 0 -total 703 -withname 503 -withcolor 703 -withlayer 344 -centroid 0 -volume 0 -area 0 -colors { BLACK CYAN1 GREEN MAGENTA1 RED WHITE YELLOW } -nbcolors 7 -layers { 1 101 102 103 104 106 107 200 } -nblayers 8
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 138 -shape 10569
+checkstatshape res_1 -solid 0 -shell 0 -face 138 -freewire 6 -freeedge 353 -sharededge 4953
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.2092687804 -avg 0.0009882759183]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 402 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 120 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 503 -n1 200 -n2 0 -total 703 -withname 503 -withcolor 703 -withlayer 344 -centroid 0 -volume 0 -area 0 -nbcolors 7 -nblayers 8
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 503 -n1 0 -n2 0 -total 503 -withname 503 -withcolor 470 -withlayer 313 -centroid 0 -volume 0 -area 0 -colors { CYAN1 GREEN MAGENTA1 RED WHITE YELLOW } -nbcolors 6 -layers { 1 101 102 103 104 106 107 200 } -nblayers 8
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 4 -max_faces 2 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 138 -shape 10599 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 138 -freewire 6 -freeedge 353 -sharededge 4953 -max_solid 0 -max_shell 0 -max_face 138 -max_freewire 6 -max_freeedge 353
+checkmaxtol res_2 -tol 0.2092687841 -avg 0.0009010196362 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: DATA : Faulty"
puts "TODO CR23096 ALL: TPSTAT : Faulty"
puts "TODO CR23096 ALL: NBSHAPES : Faulty"
puts "TODO CR23096 ALL: COLORS : Faulty"
puts "TODO CR23096 ALL: LAYERS : Faulty"
-
set filename BUC60000.igs
-set ref_data {
-DATA : Faulties = 12 ( 0 ) Warnings = 0 ( 0 ) Summary = 12 ( 0 )
-TPSTAT : Faulties = 24 ( 0 ) Warnings = 24 ( 558 ) Summary = 48 ( 558 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 186 ( 186 ) Summary = 9601 ( 9691 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 186 ( 186 ) FreeWire = 200 ( 290 ) FreeEdge = 2010 ( 2010 ) SharedEdge = 4167 ( 4167 )
-TOLERANCE : MaxTol = 0.5957823778 ( 0.5957823778 ) AvgTol = 0.002462709632 ( 0.002802777852 )
-LABELS : N0Labels = 2 ( 2 ) N1Labels = 657 ( 1422 ) N2Labels = 0 ( 0 ) TotalLabels = 659 ( 1424 ) NameLabels = 659 ( 1008 ) ColorLabels = 657 ( 1422 ) LayerLabels = 440 ( 1100 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 9 ( 10 )
-COLORS : Colors = BLUE1 BURLYWOOD1 CYAN1 DEEPSKYBLUE1 GREEN MAGENTA1 RED WHITE YELLOW ( BLUE1 BURLYWOOD1 CYAN1 DEEPSKYBLUE1 GREEN LEMONCHIFFON1 MAGENTA1 RED WHITE YELLOW )
-NLAYERS : NLayers = 10 ( 11 )
-LAYERS : Layers = 10 100 11 2 24 25 27 3 4 66 ( 1 10 100 11 2 24 25 27 3 4 66 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 558 -max_faults 0
+checkxstat D_First -n0 2 -n1 1422 -n2 0 -total 1424 -withname 1008 -withcolor 1422 -withlayer 1100 -centroid 0 -volume 0 -area 0 -colors { BLUE1 BURLYWOOD1 CYAN1 DEEPSKYBLUE1 GREEN LEMONCHIFFON1 MAGENTA1 RED WHITE YELLOW } -nbcolors 10 -layers { 1 10 100 11 2 24 25 27 3 4 66 } -nblayers 11
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 186 -shape 9691
+checkstatshape res_1 -solid 0 -shell 0 -face 186 -freewire 290 -freeedge 2010 -sharededge 4167
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.5957823778 -avg 0.002802777852]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 558 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 12
+checkdoc "tpstat c" -max_warns 24 -max_faults 24
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 2 -n1 1422 -n2 0 -total 1424 -withname 1008 -withcolor 1422 -withlayer 1100 -centroid 0 -volume 0 -area 0 -nbcolors 10 -nblayers 11
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 2 -n1 657 -n2 0 -total 659 -withname 659 -withcolor 657 -withlayer 440 -centroid 0 -volume 0 -area 0 -colors { BLUE1 BURLYWOOD1 CYAN1 DEEPSKYBLUE1 GREEN MAGENTA1 RED WHITE YELLOW } -nbcolors 9 -layers { 10 100 11 2 24 25 27 3 4 66 } -nblayers 10
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 186 -shape 9601 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 186 -freewire 200 -freeedge 2010 -sharededge 4167 -max_solid 0 -max_shell 0 -max_face 186 -max_freewire 290 -max_freeedge 2010
+checkmaxtol res_2 -tol 0.5957823778 -avg 0.002462709632 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: CHECKSHAPE : Faulty"
puts "TODO CR23096 ALL: NBSHAPES : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
puts "TODO CR23096 ALL: COLORS : Faulty"
puts "TODO CR23096 ALL: LAYERS : Faulty"
-puts "TODO CR25013 ALL: Error : 1 differences with reference data found"
-
+puts "TODO CR25013 ALL: Error: Avg tolerance of res_1"
set filename BUC60215.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 201 ) Warnings = 12 ( 487 ) Summary = 12 ( 688 )
-CHECKSHAPE : Wires = 1 ( 0 ) Faces = 1 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 117 ( 117 ) Summary = 9970 ( 10003 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 117 ( 117 ) FreeWire = 60 ( 93 ) FreeEdge = 2720 ( 2720 ) SharedEdge = 3521 ( 3521 )
-TOLERANCE : MaxTol = 0.7859817704 ( 0.7859817704 ) AvgTol = 0.005733330289 ( 0.006491446419 )
-LABELS : N0Labels = 2 ( 2 ) N1Labels = 2639 ( 3216 ) N2Labels = 0 ( 0 ) TotalLabels = 2641 ( 3218 ) NameLabels = 2641 ( 2850 ) ColorLabels = 2639 ( 3216 ) LayerLabels = 2607 ( 3179 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 7 ( 9 )
-COLORS : Colors = CYAN1 DARKOLIVEGREEN2 GRAY67 LIGHTSKYBLUE1 MAGENTA3 MEDIUMPURPLE1 TAN1 ( CYAN1 DARKOLIVEGREEN2 GRAY67 HONEYDEW LIGHTSKYBLUE1 MAGENTA3 MEDIUMPURPLE1 PALETURQUOISE1 TAN1 )
-NLAYERS : NLayers = 6 ( 7 )
-LAYERS : Layers = 120 130 131 70 71 73 ( 120 121 130 131 70 71 73 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 506 -max_faults 201
+checkxstat D_First -n0 2 -n1 3216 -n2 0 -total 3218 -withname 2850 -withcolor 3216 -withlayer 3179 -centroid 0 -volume 0 -area 0 -colors { CYAN1 DARKOLIVEGREEN2 GRAY67 HONEYDEW LIGHTSKYBLUE1 MAGENTA3 MEDIUMPURPLE1 PALETURQUOISE1 TAN1 } -nbcolors 9 -layers { 120 121 130 131 70 71 73 } -nblayers 7
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 117 -shape 10003
+checkstatshape res_1 -solid 0 -shell 0 -face 117 -freewire 93 -freeedge 2720 -sharededge 3521
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.7859817704 -avg 0.006491446419]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 506 -max_faults 201
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 12 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 2 -n1 3216 -n2 0 -total 3218 -withname 2850 -withcolor 3216 -withlayer 3179 -centroid 0 -volume 0 -area 0 -nbcolors 9 -nblayers 7
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 2 -n1 2639 -n2 0 -total 2641 -withname 2641 -withcolor 2639 -withlayer 2607 -centroid 0 -volume 0 -area 0 -colors { CYAN1 DARKOLIVEGREEN2 GRAY67 LIGHTSKYBLUE1 MAGENTA3 MEDIUMPURPLE1 TAN1 } -nbcolors 7 -layers { 120 130 131 70 71 73 } -nblayers 6
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 1 -max_faces 1 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 117 -shape 9970 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 117 -freewire 60 -freeedge 2720 -sharededge 3521 -max_solid 0 -max_shell 0 -max_face 117 -max_freewire 93 -max_freeedge 2720
+checkmaxtol res_2 -tol 0.7859817704 -avg 0.005733330289 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: NBSHAPES : Faulty"
puts "TODO CR23096 ALL: STATSHAPE : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
puts "TODO CR23096 ALL: COLORS : Faulty"
-
set filename Hutablage.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 515 ( 3435 ) Summary = 515 ( 3435 )
-CHECKSHAPE : Wires = 0 ( 2 ) Faces = 0 ( 2 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 636 ( 628 ) Summary = 25749 ( 25764 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 636 ( 628 ) FreeWire = 51 ( 87 ) FreeEdge = 297 ( 297 ) SharedEdge = 12155 ( 12155 )
-TOLERANCE : MaxTol = 0.9940193324 ( 0.9940193324 ) AvgTol = 0.01619162554 ( 0.01618254197 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 711 ( 11812 ) N2Labels = 0 ( 0 ) TotalLabels = 712 ( 11813 ) NameLabels = 708 ( 765 ) ColorLabels = 711 ( 11812 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 3 ( 5 )
-COLORS : Colors = BLUE1 RED WHITE ( BLUE1 GREEN RED TURQUOISE2 WHITE )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 3435 -max_faults 0
+checkxstat D_First -n0 1 -n1 11812 -n2 0 -total 11813 -withname 765 -withcolor 11812 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 GREEN RED TURQUOISE2 WHITE } -nbcolors 5 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 2 -max_faces 2 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 628 -shape 25764
+checkstatshape res_1 -solid 0 -shell 0 -face 628 -freewire 87 -freeedge 297 -sharededge 12155
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.9940193324 -avg 0.01618254197]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 3435 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 515 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 11812 -n2 0 -total 11813 -withname 765 -withcolor 11812 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 5 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 711 -n2 0 -total 712 -withname 708 -withcolor 711 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 RED WHITE } -nbcolors 3 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 2 -max_faces 2 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 636 -shape 25749 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 636 -freewire 51 -freeedge 297 -sharededge 12155 -max_solid 0 -max_shell 0 -max_face 628 -max_freewire 87 -max_freeedge 297
+checkmaxtol res_2 -tol 0.9940193324 -avg 0.01619162554 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: NBSHAPES : Faulty"
puts "TODO CR23096 ALL: STATSHAPE : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
puts "TODO CR23096 ALL: COLORS : Faulty"
-
set filename PUNZONE.igs
-set ref_data {
-DATA : Faulties = 0 ( 7 ) Warnings = 0 ( 1 ) Summary = 0 ( 8 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 1002 ( 2775 ) Summary = 1002 ( 2775 )
-CHECKSHAPE : Wires = 2 ( 2 ) Faces = 4 ( 4 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 1127 ( 1125 ) Summary = 44243 ( 44244 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 1127 ( 1125 ) FreeWire = 26 ( 26 ) FreeEdge = 1197 ( 1197 ) SharedEdge = 20961 ( 20961 )
-TOLERANCE : MaxTol = 0.08512566596 ( 0.08512566591 ) AvgTol = 0.005308553687 ( 0.00530936624 )
-LABELS : N0Labels = 1155 ( 1155 ) N1Labels = 0 ( 1498 ) N2Labels = 0 ( 0 ) TotalLabels = 1155 ( 2653 ) NameLabels = 1155 ( 2265 ) ColorLabels = 1125 ( 2653 ) LayerLabels = 1125 ( 1125 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 4 )
-COLORS : Colors = GREEN ( GREEN MAGENTA1 RED YELLOW )
-NLAYERS : NLayers = 2 ( 2 )
-LAYERS : Layers = 16 18 ( 16 18 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 1 -max_faults 7
+checkdoc "tpstat c" -max_warns 2775 -max_faults 0
+checkxstat D_First -n0 1155 -n1 1498 -n2 0 -total 2653 -withname 2265 -withcolor 2653 -withlayer 1125 -centroid 0 -volume 0 -area 0 -colors { GREEN MAGENTA1 RED YELLOW } -nbcolors 4 -layers { 16 18 } -nblayers 2
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 2 -max_faces 4 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 1125 -shape 44244
+checkstatshape res_1 -solid 0 -shell 0 -face 1125 -freewire 26 -freeedge 1197 -sharededge 20961
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.08512566591 -avg 0.00530936624]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 1 -max_faults 7
+checkdoc "tpstat c" -max_warns 2775 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1002 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1155 -n1 1498 -n2 0 -total 2653 -withname 2265 -withcolor 2653 -withlayer 1125 -centroid 0 -volume 0 -area 0 -nbcolors 4 -nblayers 2
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1155 -n1 0 -n2 0 -total 1155 -withname 1155 -withcolor 1125 -withlayer 1125 -centroid 0 -volume 0 -area 0 -colors { GREEN } -nbcolors 1 -layers { 16 18 } -nblayers 2
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 2 -max_faces 4 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 2 -max_faces 4 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 1127 -shape 44243 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 1127 -freewire 26 -freeedge 1197 -sharededge 20961 -max_solid 0 -max_shell 0 -max_face 1125 -max_freewire 26 -max_freeedge 1197
+checkmaxtol res_2 -tol 0.08512566596 -avg 0.005308553687 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: DATA : Faulty"
puts "TODO CR25923 ALL: TPSTAT : Faulty"
puts "TODO CR23096 ALL: CHECKSHAPE : Faulty"
puts "TODO CR23096 ALL: COLORS : Faulty"
puts "TODO CR23096 ALL: LAYERS : Faulty"
-set LinuxDiff 5
set filename UKI60094.igs
-set ref_data {
-DATA : Faulties = 2 ( 0 ) Warnings = 0 ( 0 ) Summary = 2 ( 0 )
-TPSTAT : Faulties = 4 ( 33 ) Warnings = 125 ( 319 ) Summary = 129 ( 352 )
-CHECKSHAPE : Wires = 1 ( 1 ) Faces = 3 ( 2 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 421 ( 159 ) Summary = 7850 ( 4452 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 421 ( 419 ) FreeWire = 66 ( 114 ) FreeEdge = 430 ( 430 ) SharedEdge = 3347 ( 1892 )
-TOLERANCE : MaxTol = 3.181671051 ( 2716.882548 ) AvgTol = 0.008547757257 ( 3.678737151 )
-LABELS : N0Labels = 3 ( 3 ) N1Labels = 325 ( 1665 ) N2Labels = 0 ( 0 ) TotalLabels = 328 ( 1668 ) NameLabels = 328 ( 425 ) ColorLabels = 325 ( 1665 ) LayerLabels = 193 ( 1453 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 6 ( 7 )
-COLORS : Colors = GREEN MATRABLUE RED RED4 WHITE YELLOW ( GREEN MAGENTA1 MATRABLUE RED RED4 WHITE YELLOW )
-NLAYERS : NLayers = 2 ( 3 )
-LAYERS : Layers = 1 253 ( 1 2 253 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 319 -max_faults 33
+checkxstat D_First -n0 3 -n1 1665 -n2 0 -total 1668 -withname 425 -withcolor 1665 -withlayer 1453 -centroid 0 -volume 0 -area 0 -colors { GREEN MAGENTA1 MATRABLUE RED RED4 WHITE YELLOW } -nbcolors 7 -layers { 1 2 253 } -nblayers 3
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 1 -max_faces 2 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 159 -shape 4452
+checkstatshape res_1 -solid 0 -shell 0 -face 419 -freewire 114 -freeedge 430 -sharededge 1892
+set max_tol_res_1 [checkmaxtol res_1 -tol 2716.882548 -avg 3.678737151]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 319 -max_faults 33
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 2
+checkdoc "tpstat c" -max_warns 390 -max_faults 4
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3 -n1 1665 -n2 0 -total 1668 -withname 425 -withcolor 1665 -withlayer 1453 -centroid 0 -volume 0 -area 0 -nbcolors 7 -nblayers 3
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 325 -n2 0 -total 328 -withname 328 -withcolor 325 -withlayer 193 -centroid 0 -volume 0 -area 0 -colors { GREEN MATRABLUE RED RED4 WHITE YELLOW } -nbcolors 6 -layers { 1 253 } -nblayers 2
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 1 -max_faces 2 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 1 -max_faces 3 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 421 -shape 7850 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 421 -freewire 66 -freeedge 430 -sharededge 3347 -max_solid 0 -max_shell 0 -max_face 419 -max_freewire 114 -max_freeedge 430
+checkmaxtol res_2 -tol 3.181671051 -avg 0.008547757257 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: DATA : Faulty"
puts "TODO CR23096 ALL: TPSTAT : Faulty"
puts "TODO CR23096 ALL: NBSHAPES : Faulty"
puts "TODO CR23096 ALL: COLORS : Faulty"
puts "TODO CR23096 ALL: LAYERS : Faulty"
-set LinuxDiff 1
set filename UKI60107-6.igs
-set ref_data {
-DATA : Faulties = 1 ( 0 ) Warnings = 0 ( 239 ) Summary = 1 ( 239 )
-TPSTAT : Faulties = 2 ( 0 ) Warnings = 15 ( 316 ) Summary = 17 ( 316 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 79 ( 79 ) Summary = 3800 ( 3951 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 79 ( 79 ) FreeWire = 79 ( 230 ) FreeEdge = 865 ( 865 ) SharedEdge = 1481 ( 1481 )
-TOLERANCE : MaxTol = 0.06847151261 ( 0.8635005927 ) AvgTol = 0.00133710651 ( 0.003525405269 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 596 ( 1004 ) N2Labels = 0 ( 0 ) TotalLabels = 597 ( 1005 ) NameLabels = 597 ( 745 ) ColorLabels = 596 ( 1004 ) LayerLabels = 577 ( 985 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 5 ( 7 )
-COLORS : Colors = DODGERBLUE2 GREEN MAGENTA3 TURQUOISE2 WHITE ( DODGERBLUE2 GRAY80 GREEN MAGENTA3 TURQUOISE2 WHITE YELLOW3 )
-NLAYERS : NLayers = 8 ( 10 )
-LAYERS : Layers = 1 10 13 16 19 31 4 5 ( 1 10 13 16 19 191 210 31 4 5 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 239 -max_faults 0
+checkdoc "tpstat c" -max_warns 318 -max_faults 0
+checkxstat D_First -n0 1 -n1 1004 -n2 0 -total 1005 -withname 745 -withcolor 1004 -withlayer 985 -centroid 0 -volume 0 -area 0 -colors { DODGERBLUE2 GRAY80 GREEN MAGENTA3 TURQUOISE2 WHITE YELLOW3 } -nbcolors 7 -layers { 1 10 13 16 19 191 210 31 4 5 } -nblayers 10
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 79 -shape 3951
+checkstatshape res_1 -solid 0 -shell 0 -face 79 -freewire 230 -freeedge 865 -sharededge 1481
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.8635005927 -avg 0.003525405269]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 239 -max_faults 0
+checkdoc "tpstat c" -max_warns 318 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 1
+checkdoc "tpstat c" -max_warns 15 -max_faults 2
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 1004 -n2 0 -total 1005 -withname 745 -withcolor 1004 -withlayer 985 -centroid 0 -volume 0 -area 0 -nbcolors 7 -nblayers 10
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 596 -n2 0 -total 597 -withname 597 -withcolor 596 -withlayer 577 -centroid 0 -volume 0 -area 0 -colors { DODGERBLUE2 GREEN MAGENTA3 TURQUOISE2 WHITE } -nbcolors 5 -layers { 1 10 13 16 19 31 4 5 } -nblayers 8
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 79 -shape 3800 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 79 -freewire 79 -freeedge 865 -sharededge 1481 -max_solid 0 -max_shell 0 -max_face 79 -max_freewire 230 -max_freeedge 865
+checkmaxtol res_2 -tol 0.06847151261 -avg 0.00133710651 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: DATA : Faulty"
puts "TODO CR23096 ALL: NBSHAPES : Faulty"
puts "TODO CR23096 ALL: STATSHAPE : Faulty"
puts "TODO CR23096 ALL: COLORS : Faulty"
puts "TODO CR23096 ALL: LAYERS : Faulty"
-
set filename BUC40132.igs
-set ref_data {
-DATA : Faulties = 6 ( 0 ) Warnings = 0 ( 0 ) Summary = 6 ( 0 )
-TPSTAT : Faulties = 12 ( 238 ) Warnings = 473 ( 2623 ) Summary = 485 ( 2861 )
-CHECKSHAPE : Wires = 4 ( 4 ) Faces = 4 ( 4 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 1346 ( 1345 ) Summary = 22215 ( 22296 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 1346 ( 1345 ) FreeWire = 96 ( 170 ) FreeEdge = 1061 ( 1061 ) SharedEdge = 9271 ( 9280 )
-TOLERANCE : MaxTol = 0.8099726869 ( 1.367966665 ) AvgTol = 0.008043971398 ( 0.008388581449 )
-LABELS : N0Labels = 27 ( 27 ) N1Labels = 2100 ( 5101 ) N2Labels = 0 ( 0 ) TotalLabels = 2127 ( 5128 ) NameLabels = 2127 ( 2596 ) ColorLabels = 2114 ( 5127 ) LayerLabels = 2114 ( 5127 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 11 ( 12 )
-COLORS : Colors = BLUE1 CYAN1 CYAN2 DARKGOLDENROD GREEN MAGENTA1 PALEVIOLETRED1 RED TURQUOISE2 WHITE YELLOW ( BLUE1 CYAN1 CYAN2 DARKGOLDENROD GRAY53 GREEN MAGENTA1 PALEVIOLETRED1 RED TURQUOISE2 WHITE YELLOW )
-NLAYERS : NLayers = 26 ( 27 )
-LAYERS : Layers = 10 101 102 104 105 106 11 13 200 201 21 23 25 250 29 32 38 50 53 61 63 73 74 75 83 9 ( 10 101 102 104 105 106 11 13 200 201 21 23 24 25 250 29 32 38 50 53 61 63 73 74 75 83 9 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2623 -max_faults 238
+checkxstat D_First -n0 27 -n1 5101 -n2 0 -total 5128 -withname 2596 -withcolor 5127 -withlayer 5127 -centroid 0 -volume 0 -area 0 -colors { BLUE1 CYAN1 CYAN2 DARKGOLDENROD GRAY53 GREEN MAGENTA1 PALEVIOLETRED1 RED TURQUOISE2 WHITE YELLOW } -nbcolors 12 -layers { 10 101 102 104 105 106 11 13 200 201 21 23 24 25 250 29 32 38 50 53 61 63 73 74 75 83 9 } -nblayers 27
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 4 -max_faces 4 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 1345 -shape 22296
+checkstatshape res_1 -solid 0 -shell 0 -face 1345 -freewire 170 -freeedge 1061 -sharededge 9280
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.367966665 -avg 0.008388581449]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2623 -max_faults 238
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 6
+checkdoc "tpstat c" -max_warns 473 -max_faults 12
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 27 -n1 5101 -n2 0 -total 5128 -withname 2596 -withcolor 5127 -withlayer 5127 -centroid 0 -volume 0 -area 0 -nbcolors 12 -nblayers 27
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 27 -n1 2100 -n2 0 -total 2127 -withname 2127 -withcolor 2114 -withlayer 2114 -centroid 0 -volume 0 -area 0 -colors { BLUE1 CYAN1 CYAN2 DARKGOLDENROD GREEN MAGENTA1 PALEVIOLETRED1 RED TURQUOISE2 WHITE YELLOW } -nbcolors 11 -layers { 10 101 102 104 105 106 11 13 200 201 21 23 25 250 29 32 38 50 53 61 63 73 74 75 83 9 } -nblayers 26
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 4 -max_faces 4 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 4 -max_faces 4 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 1346 -shape 22215 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 1346 -freewire 96 -freeedge 1061 -sharededge 9271 -max_solid 0 -max_shell 0 -max_face 1345 -max_freewire 170 -max_freeedge 1061
+checkmaxtol res_2 -tol 0.8099726869 -avg 0.008043971398 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: STATSHAPE : Faulty"
puts "TODO CR23096 ALL: TOLERANCE : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
-set LinuxDiff 5
-set LinuxFaulties {CHECKSHAPE}
set filename USA60022.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 1 ) Summary = 0 ( 1 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 157 ( 2003 ) Summary = 157 ( 2003 )
-CHECKSHAPE : Wires = 7 ( 14 ) Faces = 9 ( 15 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 666 ( 634 ) Summary = 25078 ( 24995 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 666 ( 634 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 11901 ( 11872 )
-TOLERANCE : MaxTol = 6.4081268 ( 1.331845935 ) AvgTol = 0.002669852591 ( 0.00229913384 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 634 ( 634 ) N2Labels = 0 ( 0 ) TotalLabels = 635 ( 635 ) NameLabels = 635 ( 635 ) ColorLabels = 634 ( 635 ) LayerLabels = 634 ( 635 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = GREEN RED ( GREEN RED )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 10 ( 10 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 2003 -max_faults 0
+checkxstat D_First -n0 1 -n1 634 -n2 0 -total 635 -withname 635 -withcolor 635 -withlayer 635 -centroid 0 -volume 0 -area 0 -colors { GREEN RED } -nbcolors 2 -layers { 10 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 14 -max_faces 15 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 634 -shape 24995
+checkstatshape res_1 -solid 0 -shell 0 -face 634 -freewire 0 -freeedge 0 -sharededge 11872
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.331845935 -avg 0.00229913384]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 2003 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 154 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 634 -n2 0 -total 635 -withname 635 -withcolor 635 -withlayer 635 -centroid 0 -volume 0 -area 0 -nbcolors 2 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 634 -n2 0 -total 635 -withname 635 -withcolor 634 -withlayer 634 -centroid 0 -volume 0 -area 0 -colors { GREEN RED } -nbcolors 2 -layers { 10 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 14 -max_faces 15 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 7 -max_faces 9 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 666 -shape 25078 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 666 -freewire 0 -freeedge 0 -sharededge 11901 -max_solid 0 -max_shell 0 -max_face 634 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 6.4081268 -avg 0.002669852591 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: DATA : Faulty"
puts "TODO CR23096 ALL: TPSTAT : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
puts "TODO CR23096 ALL: COLORS : Faulty"
puts "TODO CR23096 ALL: LAYERS : Faulty"
-
set filename catia01_s.igs
-set ref_data {
-DATA : Faulties = 8 ( 0 ) Warnings = 0 ( 0 ) Summary = 8 ( 0 )
-TPSTAT : Faulties = 16 ( 3 ) Warnings = 46 ( 305 ) Summary = 62 ( 308 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 145 ( 145 ) Summary = 3870 ( 3869 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 145 ( 145 ) FreeWire = 64 ( 64 ) FreeEdge = 617 ( 617 ) SharedEdge = 1627 ( 1627 )
-TOLERANCE : MaxTol = 0.09719916174 ( 0.09719915743 ) AvgTol = 0.001636226349 ( 0.001630578185 )
-LABELS : N0Labels = 2 ( 2 ) N1Labels = 346 ( 756 ) N2Labels = 0 ( 0 ) TotalLabels = 348 ( 758 ) NameLabels = 348 ( 478 ) ColorLabels = 347 ( 757 ) LayerLabels = 336 ( 744 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 2 ( 3 )
-COLORS : Colors = RED WHITE ( RED WHITE YELLOW )
-NLAYERS : NLayers = 6 ( 7 )
-LAYERS : Layers = 1 2 242 243 244 3 ( 1 11 2 242 243 244 3 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 308 -max_faults 3
+checkxstat D_First -n0 2 -n1 756 -n2 0 -total 758 -withname 478 -withcolor 757 -withlayer 744 -centroid 0 -volume 0 -area 0 -colors { RED WHITE YELLOW } -nbcolors 3 -layers { 1 11 2 242 243 244 3 } -nblayers 7
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 145 -shape 3869
+checkstatshape res_1 -solid 0 -shell 0 -face 145 -freewire 64 -freeedge 617 -sharededge 1627
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.09719915743 -avg 0.001630578185]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 308 -max_faults 3
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 8
+checkdoc "tpstat c" -max_warns 46 -max_faults 16
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 2 -n1 756 -n2 0 -total 758 -withname 478 -withcolor 757 -withlayer 744 -centroid 0 -volume 0 -area 0 -nbcolors 3 -nblayers 7
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 2 -n1 346 -n2 0 -total 348 -withname 348 -withcolor 347 -withlayer 336 -centroid 0 -volume 0 -area 0 -colors { RED WHITE } -nbcolors 2 -layers { 1 2 242 243 244 3 } -nblayers 6
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 145 -shape 3870 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 145 -freewire 64 -freeedge 617 -sharededge 1627 -max_solid 0 -max_shell 0 -max_face 145 -max_freewire 64 -max_freeedge 617
+checkmaxtol res_2 -tol 0.09719916174 -avg 0.001636226349 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: NBSHAPES : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename t_cat_424_002_sgi_hybdrw_vw_dosenhalter_standard.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 569 ) Warnings = 152 ( 8440 ) Summary = 152 ( 9009 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 9171 ( 9171 ) Summary = 288412 ( 288510 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 9171 ( 9171 ) FreeWire = 998 ( 1096 ) FreeEdge = 28215 ( 28215 ) SharedEdge = 122275 ( 122275 )
-TOLERANCE : MaxTol = 0.6305328468 ( 0.6305328468 ) AvgTol = 0.0003777026264 ( 0.0003780896454 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 31624 ( 37142 ) N2Labels = 0 ( 0 ) TotalLabels = 31625 ( 37143 ) NameLabels = 31621 ( 36777 ) ColorLabels = 31624 ( 37142 ) LayerLabels = 29174 ( 34054 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 4 ( 4 )
-COLORS : Colors = GOLD3 MAGENTA1 WHITE YELLOW ( GOLD3 MAGENTA1 WHITE YELLOW )
-NLAYERS : NLayers = 36 ( 36 )
-LAYERS : Layers = 1 101 102 103 104 105 106 107 108 110 111 112 113 116 117 118 123 190 192 2 200 22 229 241 253 3 34 50 51 52 54 55 56 57 58 59 ( 1 101 102 103 104 105 106 107 108 110 111 112 113 116 117 118 123 190 192 2 200 22 229 241 253 3 34 50 51 52 54 55 56 57 58 59 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 8440 -max_faults 569
+checkxstat D_First -n0 1 -n1 37142 -n2 0 -total 37143 -withname 36777 -withcolor 37142 -withlayer 34054 -centroid 0 -volume 0 -area 0 -colors { GOLD3 MAGENTA1 WHITE YELLOW } -nbcolors 4 -layers { 1 101 102 103 104 105 106 107 108 110 111 112 113 116 117 118 123 190 192 2 200 22 229 241 253 3 34 50 51 52 54 55 56 57 58 59 } -nblayers 36
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 9171 -shape 288510
+checkstatshape res_1 -solid 0 -shell 0 -face 9171 -freewire 1096 -freeedge 28215 -sharededge 122275
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.6305328468 -avg 0.0003780896454]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 8440 -max_faults 569
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 154 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 37142 -n2 0 -total 37143 -withname 36777 -withcolor 37142 -withlayer 34054 -centroid 0 -volume 0 -area 0 -nbcolors 4 -nblayers 36
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 31624 -n2 0 -total 31625 -withname 31621 -withcolor 31624 -withlayer 29174 -centroid 0 -volume 0 -area 0 -colors { GOLD3 MAGENTA1 WHITE YELLOW } -nbcolors 4 -layers { 1 101 102 103 104 105 106 107 108 110 111 112 113 116 117 118 123 190 192 2 200 22 229 241 253 3 34 50 51 52 54 55 56 57 58 59 } -nblayers 36
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 9171 -shape 288412 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 9171 -freewire 998 -freeedge 28215 -sharededge 122275 -max_solid 0 -max_shell 0 -max_face 9171 -max_freewire 1096 -max_freeedge 28215
+checkmaxtol res_2 -tol 0.6305328468 -avg 0.0003777026264 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: DATA : Faulty"
puts "TODO CR23096 ALL: NBSHAPES : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename VERSEUSE.igs
-set ref_data {
-DATA : Faulties = 1 ( 0 ) Warnings = 0 ( 0 ) Summary = 1 ( 0 )
-TPSTAT : Faulties = 2 ( 19 ) Warnings = 97 ( 1126 ) Summary = 99 ( 1145 )
-CHECKSHAPE : Wires = 0 ( 1 ) Faces = 0 ( 1 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 436 ( 436 ) Summary = 7823 ( 7826 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 436 ( 436 ) FreeWire = 15 ( 15 ) FreeEdge = 208 ( 208 ) SharedEdge = 3430 ( 3431 )
-TOLERANCE : MaxTol = 0.8904045146 ( 0.8904045345 ) AvgTol = 0.01244625407 ( 0.01247379594 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 501 ( 2306 ) N2Labels = 0 ( 0 ) TotalLabels = 502 ( 2307 ) NameLabels = 502 ( 770 ) ColorLabels = 501 ( 2306 ) LayerLabels = 443 ( 2228 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 4 ( 4 )
-COLORS : Colors = BLUE1 GREEN RED WHITE ( BLUE1 GREEN RED WHITE )
-NLAYERS : NLayers = 4 ( 4 )
-LAYERS : Layers = 10 20 30 50 ( 10 20 30 50 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1155 -max_faults 19
+checkxstat D_First -n0 1 -n1 2306 -n2 0 -total 2307 -withname 770 -withcolor 2306 -withlayer 2228 -centroid 0 -volume 0 -area 0 -colors { BLUE1 GREEN RED WHITE } -nbcolors 4 -layers { 10 20 30 50 } -nblayers 4
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 1 -max_faces 1 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 436 -shape 7826
+checkstatshape res_1 -solid 0 -shell 0 -face 436 -freewire 15 -freeedge 208 -sharededge 3431
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.8904045345 -avg 0.01247379594]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1155 -max_faults 19
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 1
+checkdoc "tpstat c" -max_warns 97 -max_faults 2
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 2306 -n2 0 -total 2307 -withname 770 -withcolor 2306 -withlayer 2228 -centroid 0 -volume 0 -area 0 -nbcolors 4 -nblayers 4
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 501 -n2 0 -total 502 -withname 502 -withcolor 501 -withlayer 443 -centroid 0 -volume 0 -area 0 -colors { BLUE1 GREEN RED WHITE } -nbcolors 4 -layers { 10 20 30 50 } -nblayers 4
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 1 -max_faces 1 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 436 -shape 7823 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 436 -freewire 15 -freeedge 208 -sharededge 3430 -max_solid 0 -max_shell 0 -max_face 436 -max_freewire 15 -max_freeedge 208
+checkmaxtol res_2 -tol 0.8904045146 -avg 0.01244625407 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename BUC60291.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 5745 ( 31066 ) Summary = 5745 ( 31066 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 6500 ( 6500 ) Summary = 158096 ( 158092 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 6500 ( 6500 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 72656 ( 72654 )
-TOLERANCE : MaxTol = 0.9560441943 ( 0.9560441934 ) AvgTol = 0.001956426418 ( 0.001954522593 )
-LABELS : N0Labels = 6500 ( 6500 ) N1Labels = 0 ( 25540 ) N2Labels = 0 ( 0 ) TotalLabels = 6500 ( 32040 ) NameLabels = 6500 ( 6500 ) ColorLabels = 6500 ( 32040 ) LayerLabels = 6500 ( 32040 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = YELLOW ( YELLOW )
-NLAYERS : NLayers = 12 ( 12 )
-LAYERS : Layers = 10 12 13 14 15 31 32 5 6 7 8 9 ( 10 12 13 14 15 31 32 5 6 7 8 9 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 31179 -max_faults 0
+checkxstat D_First -n0 6500 -n1 25540 -n2 0 -total 32040 -withname 6500 -withcolor 32040 -withlayer 32040 -centroid 0 -volume 0 -area 0 -colors { YELLOW } -nbcolors 1 -layers { 10 12 13 14 15 31 32 5 6 7 8 9 } -nblayers 12
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 6500 -shape 158092
+checkstatshape res_1 -solid 0 -shell 0 -face 6500 -freewire 0 -freeedge 0 -sharededge 72654
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.9560441934 -avg 0.001954522593]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 31179 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 5748 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 6500 -n1 25540 -n2 0 -total 32040 -withname 6500 -withcolor 32040 -withlayer 32040 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 12
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 6500 -n1 0 -n2 0 -total 6500 -withname 6500 -withcolor 6500 -withlayer 6500 -centroid 0 -volume 0 -area 0 -colors { YELLOW } -nbcolors 1 -layers { 10 12 13 14 15 31 32 5 6 7 8 9 } -nblayers 12
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 6500 -shape 158096 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 6500 -freewire 0 -freeedge 0 -sharededge 72656 -max_solid 0 -max_shell 0 -max_face 6500 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.9560441943 -avg 0.001956426418 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TOLERANCE : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename BUC60390.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 1 ) Summary = 0 ( 1 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 12 ( 1168 ) Summary = 12 ( 1168 )
-CHECKSHAPE : Wires = 16 ( 16 ) Faces = 24 ( 24 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 224 ( 224 ) Summary = 73673 ( 73661 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 224 ( 224 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 36616 ( 36608 )
-TOLERANCE : MaxTol = 0.3297745494 ( 0.0412874456 ) AvgTol = 8.510529471e-005 ( 3.712938892e-005 )
-LABELS : N0Labels = 224 ( 224 ) N1Labels = 0 ( 21432 ) N2Labels = 0 ( 0 ) TotalLabels = 224 ( 21656 ) NameLabels = 224 ( 224 ) ColorLabels = 224 ( 21656 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = YELLOW ( YELLOW )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 1168 -max_faults 0
+checkxstat D_First -n0 224 -n1 21432 -n2 0 -total 21656 -withname 224 -withcolor 21656 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { YELLOW } -nbcolors 1 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 16 -max_faces 24 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 224 -shape 73661
+checkstatshape res_1 -solid 0 -shell 0 -face 224 -freewire 0 -freeedge 0 -sharededge 36608
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.0412874456 -avg 3.712938892e-005]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 1168 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 12 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 224 -n1 21432 -n2 0 -total 21656 -withname 224 -withcolor 21656 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 224 -n1 0 -n2 0 -total 224 -withname 224 -withcolor 224 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { YELLOW } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 16 -max_faces 24 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 16 -max_faces 24 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 224 -shape 73673 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 224 -freewire 0 -freeedge 0 -sharededge 36616 -max_solid 0 -max_shell 0 -max_face 224 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.3297745494 -avg 8.510529471e-005 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
-puts "TODO CR23096 ALL: CHECKSHAPE : Faulty"
puts "TODO CR23096 ALL: TOLERANCE : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
+puts "TODO CR23096 ALL: CHECKSHAPE : Faulty ref number of wires in command checkshape ff with max possible number"
-set LinuxDiff 3
set filename 1stpunch-mcsrfs.igs
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 1 ) Summary = 0 ( 1 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 885 ( 1951 ) Summary = 885 ( 1951 )
-CHECKSHAPE : Wires = 6 ( 4 ) Faces = 3 ( 3 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 1223 ( 1223 ) Summary = 68996 ( 68971 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 1223 ( 1223 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 33290 ( 33278 )
-TOLERANCE : MaxTol = 0.002714431471 ( 0.001436622896 ) AvgTol = 1.636929841e-006 ( 9.67254762e-006 )
-LABELS : N0Labels = 1215 ( 1215 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1215 ( 1215 ) NameLabels = 1215 ( 1215 ) ColorLabels = 0 ( 0 ) LayerLabels = 1207 ( 1215 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 30 ( 30 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 2792 -max_faults 0
+checkdoc "tpstat c" -max_warns 1953 -max_faults 0
+checkxstat D_First -n0 1215 -n1 0 -n2 0 -total 1215 -withname 1215 -withcolor 0 -withlayer 1215 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { 30 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 2 -max_faces 2 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 1223 -shape 68971
+checkstatshape res_1 -solid 0 -shell 0 -face 1223 -freewire 0 -freeedge 0 -sharededge 33278
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.001436622896 -avg 9.67254762e-006]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 2792 -max_faults 0
+checkdoc "tpstat c" -max_warns 1953 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 883 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1215 -n1 0 -n2 0 -total 1215 -withname 1215 -withcolor 0 -withlayer 1215 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1215 -n1 0 -n2 0 -total 1215 -withname 1215 -withcolor 0 -withlayer 1207 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { 30 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 2 -max_faces 2 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 4 -max_faces 2 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+regexp {COMPOUND +: +([-0-9.+eE]+)} ${nbshapes_res_1} full comp_res_1
+set shape_comp_res_1 [expr ${shape_res_1} - ${comp_res_1}]
+checknbshapes res_2 -solid 0 -shell 0 -face 1223 -shape 68996 -de_iges ${shape_comp_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 1223 -freewire 0 -freeedge 0 -sharededge 33290 -max_solid 0 -max_shell 0 -max_face 1223 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.002714431471 -avg 1.636929841e-006 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: STATSHAPE : Faulty"
-
-set ProductMode OFF
set filename model_214.stp
-set ref_data {
-DATA : Faulties = 0 ( 1 ) Warnings = 0 ( 3 ) Summary = 0 ( 4 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 2 ( 3 ) Summary = 2 ( 3 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 15 ( 0 ) Face = 15 ( 15 ) Summary = 187 ( 174 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 15 ( 0 ) Face = 15 ( 15 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 71 ( 71 )
-TOLERANCE : MaxTol = 1e-07 ( 1.0001e-07 ) AvgTol = 1e-07 ( 1.000029825e-07 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 15 ( 15 ) N2Labels = 0 ( 0 ) TotalLabels = 16 ( 16 ) NameLabels = 1 ( 1 ) ColorLabels = 15 ( 15 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = GREEN ( GREEN )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename} -productmode 0
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 3 -max_faults 1
+checkdoc "tpstat c" -max_warns 3 -max_faults 0
+checkxstat D_First -n0 1 -n1 15 -n2 0 -total 16 -withname 1 -withcolor 15 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { GREEN } -nbcolors 1 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 15 -shape 174
+checkstatshape res_1 -solid 0 -shell 0 -face 15 -freewire 0 -freeedge 0 -sharededge 71
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.0001e-07 -avg 1.000029825e-07]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 3 -max_faults 1
+checkdoc "tpstat c" -max_warns 3 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 15 -n2 0 -total 16 -withname 1 -withcolor 15 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 15 -n2 0 -total 16 -withname 1 -withcolor 15 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { GREEN } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 15 -face 15 -shape 187 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 15 -face 15 -freewire 0 -freeedge 0 -sharededge 71 -max_solid 0 -max_shell 0 -max_face 15 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1e-07 -avg 1e-07 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LAYERS : Faulty"
-
set filename tr9_r0701-db.stp
-set ref_data {
-DATA : Faulties = 0 ( 914 ) Warnings = 0 ( 0 ) Summary = 0 ( 914 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 30 ( 30 ) Summary = 30 ( 30 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 35 ( 35 ) Summary = 223 ( 223 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 35 ( 35 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 82 ( 82 )
-TOLERANCE : MaxTol = 4.199313252e-05 ( 4.297107017e-05 ) AvgTol = 1.375200154e-05 ( 1.381138283e-05 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 1 ( 1 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = WHITE ( WHITE )
-NLAYERS : NLayers = 1 ( 2 )
-LAYERS : Layers = 2 ( { 0} { 2} )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 914
+checkdoc "tpstat c" -max_warns 30 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { } -nblayers 2
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 35 -shape 223
+checkstatshape res_1 -solid 1 -shell 1 -face 35 -freewire 0 -freeedge 0 -sharededge 82
+set max_tol_res_1 [checkmaxtol res_1 -tol 4.297107017e-05 -avg 1.381138283e-05]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 914
+checkdoc "tpstat c" -max_warns 30 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 30 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 2
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 35 -shape 223 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 35 -freewire 0 -freeedge 0 -sharededge 82 -max_solid 1 -max_shell 1 -max_face 35 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 4.199313252e-05 -avg 1.375200154e-05 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: STATSHAPE : Faulty"
-
set filename id_turbine-C.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 42 ( 58 ) Summary = 42 ( 58 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 49 ( 0 ) Face = 49 ( 49 ) Summary = 579 ( 529 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 49 ( 0 ) Face = 49 ( 49 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 220 ( 218 )
-TOLERANCE : MaxTol = 0.003591433268 ( 0.006121716429 ) AvgTol = 0.0002657130942 ( 0.0004625449099 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 58 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 49 -shape 529
+checkstatshape res_1 -solid 0 -shell 0 -face 49 -freewire 0 -freeedge 0 -sharededge 218
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.006121716429 -avg 0.0004625449099]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 58 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 19 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 49 -face 49 -shape 579 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 49 -face 49 -freewire 0 -freeedge 0 -sharededge 220 -max_solid 0 -max_shell 0 -max_face 49 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.003591433268 -avg 0.0002657130942 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename mat-b.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 25 ( 10 ) Summary = 25 ( 10 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 2 ( 2 ) Shell = 2 ( 2 ) Face = 80 ( 80 ) Summary = 674 ( 661 )
-STATSHAPE : Solid = 2 ( 2 ) Shell = 2 ( 2 ) Face = 80 ( 80 ) FreeWire = 0 ( 0 ) FreeEdge = 12 ( 12 ) SharedEdge = 261 ( 261 )
-TOLERANCE : MaxTol = 0.0009825722198 ( 0.0009825722195 ) AvgTol = 7.814613912e-005 ( 7.722166107e-005 )
-LABELS : N0Labels = 3 ( 3 ) N1Labels = 2 ( 3 ) N2Labels = 0 ( 1 ) TotalLabels = 5 ( 7 ) NameLabels = 5 ( 5 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 10 -max_faults 0
+checkxstat D_First -n0 3 -n1 3 -n2 1 -total 7 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 2 -shell 2 -face 80 -shape 661
+checkstatshape res_1 -solid 2 -shell 2 -face 80 -freewire 0 -freeedge 12 -sharededge 261
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.0009825722195 -avg 7.722166107e-005]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 10 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 25 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3 -n1 3 -n2 1 -total 7 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 2 -shell 2 -face 80 -shape 674 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 2 -shell 2 -face 80 -freewire 0 -freeedge 12 -sharededge 261 -max_solid 2 -max_shell 2 -max_face 80 -max_freewire 0 -max_freeedge 12
+checkmaxtol res_2 -tol 0.0009825722198 -avg 7.814613912e-005 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LAYERS : Faulty"
-
set filename tr8_pr3_al.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 10 ( 10 ) Summary = 10 ( 10 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 4 ( 4 ) Shell = 4 ( 4 ) Face = 16 ( 16 ) Summary = 95 ( 95 )
-STATSHAPE : Solid = 4 ( 4 ) Shell = 4 ( 4 ) Face = 16 ( 16 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 36 ( 36 )
-TOLERANCE : MaxTol = 1e-007 ( 1e-007 ) AvgTol = 1e-007 ( 1e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 4 ( 4 ) N2Labels = 0 ( 0 ) TotalLabels = 5 ( 5 ) NameLabels = 1 ( 1 ) ColorLabels = 4 ( 4 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 4 ( 4 )
-COLORS : Colors = BLUE1 GREEN RED YELLOW ( BLUE1 GREEN RED YELLOW )
-NLAYERS : NLayers = 0 ( 1 )
-LAYERS : Layers = ( LayerA )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 10 -max_faults 0
+checkxstat D_First -n0 1 -n1 4 -n2 0 -total 5 -withname 1 -withcolor 4 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 GREEN RED YELLOW } -nbcolors 4 -layers { LayerA } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 4 -shell 4 -face 16 -shape 95
+checkstatshape res_1 -solid 4 -shell 4 -face 16 -freewire 0 -freeedge 0 -sharededge 36
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-007 -avg 1e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 10 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 10 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 4 -n2 0 -total 5 -withname 1 -withcolor 4 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 4 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 4 -n2 0 -total 5 -withname 1 -withcolor 4 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 GREEN RED YELLOW } -nbcolors 4 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 4 -shell 4 -face 16 -shape 95 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 4 -shell 4 -face 16 -freewire 0 -freeedge 0 -sharededge 36 -max_solid 4 -max_shell 4 -max_face 16 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1e-007 -avg 1e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: PROPS : Faulty"
-
set filename trj12_pm10-ct-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 12 ( 12 ) Shell = 12 ( 12 ) Face = 61 ( 61 ) Summary = 316 ( 316 )
-STATSHAPE : Solid = 17 ( 17 ) Shell = 17 ( 17 ) Face = 93 ( 93 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 98 ( 98 )
-TOLERANCE : MaxTol = 1.00005e-007 ( 1.00005e-007 ) AvgTol = 1.000038209e-007 ( 1.000038209e-007 )
-LABELS : N0Labels = 17 ( 17 ) N1Labels = 25 ( 25 ) N2Labels = 0 ( 0 ) TotalLabels = 42 ( 42 ) NameLabels = 42 ( 42 ) ColorLabels = 12 ( 12 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 17 ( 42 ) Volume = 13 ( 13 ) Area = 13 ( 13 )
-NCOLORS : NColors = 3 ( 3 )
-COLORS : Colors = CYAN1 GREEN LIGHTSKYBLUE3 ( CYAN1 GREEN LIGHTSKYBLUE3 )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 17 -n1 25 -n2 0 -total 42 -withname 42 -withcolor 12 -withlayer 0 -centroid 42 -volume 13 -area 13 -colors { CYAN1 GREEN LIGHTSKYBLUE3 } -nbcolors 3 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 12 -shell 12 -face 61 -shape 316
+checkstatshape res_1 -solid 17 -shell 17 -face 93 -freewire 0 -freeedge 0 -sharededge 98
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.00005e-007 -avg 1.000038209e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 17 -n1 25 -n2 0 -total 42 -withname 42 -withcolor 12 -withlayer 0 -centroid 42 -volume 13 -area 13 -nbcolors 3 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 17 -n1 25 -n2 0 -total 42 -withname 42 -withcolor 12 -withlayer 0 -centroid 17 -volume 13 -area 13 -colors { CYAN1 GREEN LIGHTSKYBLUE3 } -nbcolors 3 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 12 -shell 12 -face 61 -shape 316 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 17 -shell 17 -face 93 -freewire 0 -freeedge 0 -sharededge 98 -max_solid 17 -max_shell 17 -max_face 93 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.00005e-007 -avg 1.000038209e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename trj3_s1-id-203.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 33 ( 32 ) Summary = 33 ( 32 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 8 ( 8 ) Shell = 8 ( 8 ) Face = 101 ( 101 ) Summary = 604 ( 604 )
-STATSHAPE : Solid = 11 ( 11 ) Shell = 11 ( 11 ) Face = 134 ( 134 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 221 ( 221 )
-TOLERANCE : MaxTol = 0.0002663644062 ( 0.004247215546 ) AvgTol = 6.0376793e-006 ( 9.943585154e-005 )
-LABELS : N0Labels = 13 ( 13 ) N1Labels = 18 ( 23 ) N2Labels = 0 ( 5 ) TotalLabels = 31 ( 41 ) NameLabels = 27 ( 27 ) ColorLabels = 12 ( 12 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 3 ( 3 )
-COLORS : Colors = BLUE1 RED YELLOW ( BLUE1 RED YELLOW )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 32 -max_faults 0
+checkxstat D_First -n0 13 -n1 23 -n2 5 -total 41 -withname 27 -withcolor 12 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 RED YELLOW } -nbcolors 3 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 8 -shell 8 -face 101 -shape 604
+checkstatshape res_1 -solid 11 -shell 11 -face 134 -freewire 0 -freeedge 0 -sharededge 221
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.004247215546 -avg 9.943585154e-005]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 32 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 32 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 13 -n1 23 -n2 5 -total 41 -withname 27 -withcolor 12 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 3 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 13 -n1 18 -n2 0 -total 31 -withname 27 -withcolor 12 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 RED YELLOW } -nbcolors 3 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 8 -shell 8 -face 101 -shape 604 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 11 -shell 11 -face 134 -freewire 0 -freeedge 0 -sharededge 221 -max_solid 11 -max_shell 11 -max_face 134 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.0002663644062 -avg 6.0376793e-006 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: PROPS : Faulty"
-
set filename trj7_as1-id-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 14 ( 14 ) Summary = 14 ( 14 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 5 ( 5 ) Shell = 5 ( 5 ) Face = 39 ( 39 ) Summary = 301 ( 289 )
-STATSHAPE : Solid = 18 ( 18 ) Shell = 18 ( 18 ) Face = 125 ( 125 ) FreeWire = 0 ( 0 ) FreeEdge = 24 ( 24 ) SharedEdge = 96 ( 96 )
-TOLERANCE : MaxTol = 1e-007 ( 1e-007 ) AvgTol = 1e-007 ( 1e-007 )
-LABELS : N0Labels = 11 ( 11 ) N1Labels = 30 ( 30 ) N2Labels = 0 ( 0 ) TotalLabels = 41 ( 41 ) NameLabels = 26 ( 26 ) ColorLabels = 20 ( 20 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 1 ( 14 ) Volume = 1 ( 1 ) Area = 1 ( 1 )
-NCOLORS : NColors = 4 ( 4 )
-COLORS : Colors = BLUE1 DODGERBLUE2 GREEN RED ( BLUE1 DODGERBLUE2 GREEN RED )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 14 -max_faults 0
+checkxstat D_First -n0 11 -n1 30 -n2 0 -total 41 -withname 26 -withcolor 20 -withlayer 0 -centroid 14 -volume 1 -area 1 -colors { BLUE1 DODGERBLUE2 GREEN RED } -nbcolors 4 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 5 -shell 5 -face 39 -shape 289
+checkstatshape res_1 -solid 18 -shell 18 -face 125 -freewire 0 -freeedge 24 -sharededge 96
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-007 -avg 1e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 14 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 14 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 11 -n1 30 -n2 0 -total 41 -withname 26 -withcolor 20 -withlayer 0 -centroid 14 -volume 1 -area 1 -nbcolors 4 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 11 -n1 30 -n2 0 -total 41 -withname 26 -withcolor 20 -withlayer 0 -centroid 1 -volume 1 -area 1 -colors { BLUE1 DODGERBLUE2 GREEN RED } -nbcolors 4 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 5 -shell 5 -face 39 -shape 301 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 18 -shell 18 -face 125 -freewire 0 -freeedge 24 -sharededge 96 -max_solid 18 -max_shell 18 -max_face 125 -max_freewire 0 -max_freeedge 24
+checkmaxtol res_2 -tol 1e-007 -avg 1e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: PROPS : Faulty"
-
set filename trj7_as1-pe-203.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 5 ( 5 ) Shell = 5 ( 5 ) Face = 53 ( 53 ) Summary = 353 ( 353 )
-STATSHAPE : Solid = 18 ( 18 ) Shell = 18 ( 18 ) Face = 160 ( 160 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 126 ( 126 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1.000100003e-007 ) AvgTol = 1.000062348e-007 ( 1.000062348e-007 )
-LABELS : N0Labels = 9 ( 9 ) N1Labels = 13 ( 13 ) N2Labels = 0 ( 0 ) TotalLabels = 22 ( 22 ) NameLabels = 22 ( 22 ) ColorLabels = 3 ( 3 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 9 ( 22 ) Volume = 9 ( 9 ) Area = 9 ( 9 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = GREEN ( GREEN )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 9 -n1 13 -n2 0 -total 22 -withname 22 -withcolor 3 -withlayer 0 -centroid 22 -volume 9 -area 9 -colors { GREEN } -nbcolors 1 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 5 -shell 5 -face 53 -shape 353
+checkstatshape res_1 -solid 18 -shell 18 -face 160 -freewire 0 -freeedge 0 -sharededge 126
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-007 -avg 1.000062348e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 9 -n1 13 -n2 0 -total 22 -withname 22 -withcolor 3 -withlayer 0 -centroid 22 -volume 9 -area 9 -nbcolors 1 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 9 -n1 13 -n2 0 -total 22 -withname 22 -withcolor 3 -withlayer 0 -centroid 9 -volume 9 -area 9 -colors { GREEN } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 5 -shell 5 -face 53 -shape 353 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 18 -shell 18 -face 160 -freewire 0 -freeedge 0 -sharededge 126 -max_solid 18 -max_shell 18 -max_face 160 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.000062348e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename Box.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 26 ( 27 ) Summary = 26 ( 27 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 226 ( 226 ) Summary = 1367 ( 1365 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 226 ( 226 ) FreeWire = 0 ( 0 ) FreeEdge = 2 ( 2 ) SharedEdge = 553 ( 553 )
-TOLERANCE : MaxTol = 0.004186274562 ( 0.004186316422 ) AvgTol = 6.222296623e-005 ( 6.16998157e-005 )
-LABELS : N0Labels = 3 ( 3 ) N1Labels = 2 ( 4 ) N2Labels = 0 ( 2 ) TotalLabels = 5 ( 9 ) NameLabels = 5 ( 6 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 26 -max_faults 0
+checkxstat D_First -n0 3 -n1 4 -n2 2 -total 9 -withname 6 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 226 -shape 1365
+checkstatshape res_1 -solid 1 -shell 1 -face 226 -freewire 0 -freeedge 2 -sharededge 553
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.004186316422 -avg 6.16998157e-005]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 26 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 24 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3 -n1 4 -n2 2 -total 9 -withname 6 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 226 -shape 1367 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 226 -freewire 0 -freeedge 2 -sharededge 553 -max_solid 1 -max_shell 1 -max_face 226 -max_freewire 0 -max_freeedge 2
+checkmaxtol res_2 -tol 0.004186274562 -avg 6.222296623e-005 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: PROPS : Faulty"
-
set filename trj7_as1-pe-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 5 ( 5 ) Shell = 5 ( 5 ) Face = 53 ( 53 ) Summary = 353 ( 353 )
-STATSHAPE : Solid = 18 ( 18 ) Shell = 18 ( 18 ) Face = 160 ( 160 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 126 ( 126 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1.000100003e-007 ) AvgTol = 1.000062348e-007 ( 1.000062348e-007 )
-LABELS : N0Labels = 9 ( 9 ) N1Labels = 13 ( 13 ) N2Labels = 0 ( 0 ) TotalLabels = 22 ( 22 ) NameLabels = 22 ( 22 ) ColorLabels = 3 ( 3 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 9 ( 22 ) Volume = 9 ( 9 ) Area = 9 ( 9 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = GREEN ( GREEN )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 9 -n1 13 -n2 0 -total 22 -withname 22 -withcolor 3 -withlayer 0 -centroid 22 -volume 9 -area 9 -colors { GREEN } -nbcolors 1 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 5 -shell 5 -face 53 -shape 353
+checkstatshape res_1 -solid 18 -shell 18 -face 160 -freewire 0 -freeedge 0 -sharededge 126
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-007 -avg 1.000062348e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 9 -n1 13 -n2 0 -total 22 -withname 22 -withcolor 3 -withlayer 0 -centroid 22 -volume 9 -area 9 -nbcolors 1 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 9 -n1 13 -n2 0 -total 22 -withname 22 -withcolor 3 -withlayer 0 -centroid 9 -volume 9 -area 9 -colors { GREEN } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 5 -shell 5 -face 53 -shape 353 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 18 -shell 18 -face 160 -freewire 0 -freeedge 0 -sharededge 126 -max_solid 18 -max_shell 18 -max_face 160 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.000062348e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename trj10_ap209-eb.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 37 ) Summary = 0 ( 37 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 38 ( 38 ) Face = 115 ( 115 ) Summary = 949 ( 949 )
-STATSHAPE : Solid = 2 ( 2 ) Shell = 76 ( 76 ) Face = 230 ( 230 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 376 ( 376 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1.000100003e-007 ) AvgTol = 1.000082513e-007 ( 1.000082513e-007 )
-LABELS : N0Labels = 41 ( 41 ) N1Labels = 41 ( 41 ) N2Labels = 0 ( 0 ) TotalLabels = 82 ( 82 ) NameLabels = 82 ( 81 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 37 -max_faults 0
+checkxstat D_First -n0 41 -n1 41 -n2 0 -total 82 -withname 81 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 38 -face 115 -shape 949
+checkstatshape res_1 -solid 2 -shell 76 -face 230 -freewire 0 -freeedge 0 -sharededge 376
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-007 -avg 1.000082513e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 37 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 41 -n1 41 -n2 0 -total 82 -withname 81 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 41 -n1 41 -n2 0 -total 82 -withname 82 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 38 -face 115 -shape 949 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 2 -shell 76 -face 230 -freewire 0 -freeedge 0 -sharededge 376 -max_solid 2 -max_shell 76 -max_face 230 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.000082513e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: STATSHAPE : Faulty"
-
set filename bm4_ug_punch_c.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 4 ( 40 ) Summary = 4 ( 40 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 3 ( 3 ) Shell = 36 ( 3 ) Face = 186 ( 186 ) Summary = 1404 ( 1371 )
-STATSHAPE : Solid = 3 ( 3 ) Shell = 36 ( 3 ) Face = 186 ( 186 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 548 ( 548 )
-TOLERANCE : MaxTol = 0.007676795012 ( 0.01770527621 ) AvgTol = 0.0001484581256 ( 0.0002068814634 )
-LABELS : N0Labels = 5 ( 5 ) N1Labels = 37 ( 37 ) N2Labels = 0 ( 0 ) TotalLabels = 42 ( 42 ) NameLabels = 9 ( 9 ) ColorLabels = 36 ( 36 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 3 ( 3 )
-COLORS : Colors = MAGENTA1 MEDIUMSEAGREEN RED4 ( MAGENTA1 MEDIUMSEAGREEN RED4 )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 40 -max_faults 0
+checkxstat D_First -n0 5 -n1 37 -n2 0 -total 42 -withname 9 -withcolor 36 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { MAGENTA1 MEDIUMSEAGREEN RED4 } -nbcolors 3 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 3 -shell 3 -face 186 -shape 1371
+checkstatshape res_1 -solid 3 -shell 3 -face 186 -freewire 0 -freeedge 0 -sharededge 548
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.01770527621 -avg 0.0002068814634]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 40 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 5 -n1 37 -n2 0 -total 42 -withname 9 -withcolor 36 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 3 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 5 -n1 37 -n2 0 -total 42 -withname 9 -withcolor 36 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { MAGENTA1 MEDIUMSEAGREEN RED4 } -nbcolors 3 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 3 -shell 36 -face 186 -shape 1404 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 3 -shell 36 -face 186 -freewire 0 -freeedge 0 -sharededge 548 -max_solid 3 -max_shell 3 -max_face 186 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.007676795012 -avg 0.0001484581256 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: PROPS : Faulty"
-
set filename trj8_as1-ec-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 5 ( 5 ) Shell = 5 ( 5 ) Face = 53 ( 53 ) Summary = 353 ( 353 )
-STATSHAPE : Solid = 18 ( 18 ) Shell = 18 ( 18 ) Face = 160 ( 160 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 126 ( 126 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1.000100003e-007 ) AvgTol = 1.000062348e-007 ( 1.000062348e-007 )
-LABELS : N0Labels = 9 ( 9 ) N1Labels = 13 ( 13 ) N2Labels = 0 ( 0 ) TotalLabels = 22 ( 22 ) NameLabels = 22 ( 22 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 9 ( 22 ) Volume = 9 ( 9 ) Area = 9 ( 9 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 9 -n1 13 -n2 0 -total 22 -withname 22 -withcolor 0 -withlayer 0 -centroid 22 -volume 9 -area 9 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 5 -shell 5 -face 53 -shape 353
+checkstatshape res_1 -solid 18 -shell 18 -face 160 -freewire 0 -freeedge 0 -sharededge 126
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-007 -avg 1.000062348e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 9 -n1 13 -n2 0 -total 22 -withname 22 -withcolor 0 -withlayer 0 -centroid 22 -volume 9 -area 9 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 9 -n1 13 -n2 0 -total 22 -withname 22 -withcolor 0 -withlayer 0 -centroid 9 -volume 9 -area 9 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 5 -shell 5 -face 53 -shape 353 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 18 -shell 18 -face 160 -freewire 0 -freeedge 0 -sharededge 126 -max_solid 18 -max_shell 18 -max_face 160 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.000062348e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename trj7_k1-id-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 15 ( 16 ) Summary = 15 ( 16 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 46 ( 46 ) Summary = 288 ( 288 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 46 ( 46 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 117 ( 117 )
-TOLERANCE : MaxTol = 0.01475036715 ( 0.01475021965 ) AvgTol = 0.0004055238368 ( 0.0004055209364 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 59 ( 61 ) N2Labels = 0 ( 0 ) TotalLabels = 60 ( 62 ) NameLabels = 1 ( 1 ) ColorLabels = 60 ( 62 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 5 ( 5 )
-COLORS : Colors = DEEPSKYBLUE2 MAGENTA1 ORANGE ORANGERED RED ( DEEPSKYBLUE2 MAGENTA1 ORANGE ORANGERED RED )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 18 -max_faults 0
+checkxstat D_First -n0 1 -n1 61 -n2 0 -total 62 -withname 1 -withcolor 62 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { DEEPSKYBLUE2 MAGENTA1 ORANGE ORANGERED RED } -nbcolors 5 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 1 -face 46 -shape 288
+checkstatshape res_1 -solid 0 -shell 1 -face 46 -freewire 0 -freeedge 0 -sharededge 117
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.01475021965 -avg 0.0004055209364]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 18 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 15 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 61 -n2 0 -total 62 -withname 1 -withcolor 62 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 5 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 59 -n2 0 -total 60 -withname 1 -withcolor 60 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { DEEPSKYBLUE2 MAGENTA1 ORANGE ORANGERED RED } -nbcolors 5 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 1 -face 46 -shape 288 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 1 -face 46 -freewire 0 -freeedge 0 -sharededge 117 -max_solid 0 -max_shell 1 -max_face 46 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.01475036715 -avg 0.0004055238368 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: STATSHAPE : Faulty"
-
set filename ug_turbine-B.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 1 ( 0 ) Face = 1 ( 1 ) Summary = 11 ( 11 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 1 ( 0 ) Face = 1 ( 1 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 4 ( 4 )
-TOLERANCE : MaxTol = 0.01553531324 ( 0.04002196131 ) AvgTol = 0.009251748359 ( 0.02246039438 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 1 ( 1 ) N2Labels = 0 ( 0 ) TotalLabels = 2 ( 2 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = CYAN1 ( CYAN1 )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 1 -n2 0 -total 2 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { CYAN1 } -nbcolors 1 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 1 -shape 11
+checkstatshape res_1 -solid 0 -shell 0 -face 1 -freewire 0 -freeedge 0 -sharededge 4
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.04002196131 -avg 0.02246039438]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 1 -n2 0 -total 2 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 1 -n2 0 -total 2 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { CYAN1 } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 1 -face 1 -shape 11 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 1 -face 1 -freewire 0 -freeedge 0 -sharededge 4 -max_solid 0 -max_shell 0 -max_face 1 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.01553531324 -avg 0.009251748359 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename trj7_pm5-ct-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 5 ( 5 ) Shell = 5 ( 5 ) Face = 111 ( 111 ) Summary = 732 ( 732 )
-STATSHAPE : Solid = 5 ( 5 ) Shell = 5 ( 5 ) Face = 111 ( 111 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 278 ( 278 )
-TOLERANCE : MaxTol = 0.0004869373599 ( 0.0004869373599 ) AvgTol = 2.610579264e-005 ( 2.610579263e-005 )
-LABELS : N0Labels = 6 ( 6 ) N1Labels = 5 ( 6 ) N2Labels = 0 ( 1 ) TotalLabels = 11 ( 13 ) NameLabels = 11 ( 11 ) ColorLabels = 5 ( 5 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 5 ( 5 )
-COLORS : Colors = BLUE1 CHARTREUSE CYAN1 RED YELLOW ( BLUE1 CHARTREUSE CYAN1 RED YELLOW )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 6 -n1 6 -n2 1 -total 13 -withname 11 -withcolor 5 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 CHARTREUSE CYAN1 RED YELLOW } -nbcolors 5 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 5 -shell 5 -face 111 -shape 732
+checkstatshape res_1 -solid 5 -shell 5 -face 111 -freewire 0 -freeedge 0 -sharededge 278
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.0004869373599 -avg 2.610579263e-005]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 6 -n1 6 -n2 1 -total 13 -withname 11 -withcolor 5 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 5 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 6 -n1 5 -n2 0 -total 11 -withname 11 -withcolor 5 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 CHARTREUSE CYAN1 RED YELLOW } -nbcolors 5 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 5 -shell 5 -face 111 -shape 732 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 5 -shell 5 -face 111 -freewire 0 -freeedge 0 -sharededge 278 -max_solid 5 -max_shell 5 -max_face 111 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.0004869373599 -avg 2.610579264e-005 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename voilure.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 4 ( 6 ) Summary = 4 ( 6 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 52 ( 52 ) Summary = 426 ( 404 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 52 ( 52 ) FreeWire = 0 ( 0 ) FreeEdge = 21 ( 21 ) SharedEdge = 157 ( 157 )
-TOLERANCE : MaxTol = 0.0004859880213 ( 0.0004859879605 ) AvgTol = 3.800436207e-005 ( 3.800656244e-005 )
-LABELS : N0Labels = 3 ( 3 ) N1Labels = 2 ( 3 ) N2Labels = 0 ( 1 ) TotalLabels = 5 ( 7 ) NameLabels = 5 ( 5 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 6 -max_faults 0
+checkxstat D_First -n0 3 -n1 3 -n2 1 -total 7 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 52 -shape 404
+checkstatshape res_1 -solid 1 -shell 1 -face 52 -freewire 0 -freeedge 21 -sharededge 157
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.0004859879605 -avg 3.800656244e-005]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 6 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3 -n1 3 -n2 1 -total 7 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 52 -shape 426 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 52 -freewire 0 -freeedge 21 -sharededge 157 -max_solid 1 -max_shell 1 -max_face 52 -max_freewire 0 -max_freeedge 21
+checkmaxtol res_2 -tol 0.0004859880213 -avg 3.800436207e-005 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: PROPS : Faulty"
-
set filename trj8_as1-tu-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 19 ) Summary = 0 ( 19 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 5 ( 5 ) Shell = 5 ( 5 ) Face = 53 ( 53 ) Summary = 353 ( 353 )
-STATSHAPE : Solid = 18 ( 18 ) Shell = 18 ( 18 ) Face = 160 ( 160 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 126 ( 126 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1.000100003e-007 ) AvgTol = 1.000062348e-007 ( 1.000062348e-007 )
-LABELS : N0Labels = 9 ( 9 ) N1Labels = 35 ( 35 ) N2Labels = 0 ( 0 ) TotalLabels = 44 ( 44 ) NameLabels = 22 ( 22 ) ColorLabels = 27 ( 27 ) LayerLabels = 5 ( 5 )
-PROPS : Centroid = 9 ( 22 ) Volume = 9 ( 9 ) Area = 9 ( 9 )
-NCOLORS : NColors = 7 ( 7 )
-COLORS : Colors = BLUE1 DARKORANGE DARKORANGE GREEN RED YELLOW3 YELLOW3 ( BLUE1 DARKORANGE DARKORANGE GREEN RED YELLOW3 YELLOW3 )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 256 ( 256 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 19 -max_faults 0
+checkxstat D_First -n0 9 -n1 35 -n2 0 -total 44 -withname 22 -withcolor 27 -withlayer 5 -centroid 22 -volume 9 -area 9 -colors { BLUE1 DARKORANGE DARKORANGE GREEN RED YELLOW3 YELLOW3 } -nbcolors 7 -layers { 256 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 5 -shell 5 -face 53 -shape 353
+checkstatshape res_1 -solid 18 -shell 18 -face 160 -freewire 0 -freeedge 0 -sharededge 126
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-007 -avg 1.000062348e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 19 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 9 -n1 35 -n2 0 -total 44 -withname 22 -withcolor 27 -withlayer 5 -centroid 22 -volume 9 -area 9 -nbcolors 7 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 9 -n1 35 -n2 0 -total 44 -withname 22 -withcolor 27 -withlayer 5 -centroid 9 -volume 9 -area 9 -colors { BLUE1 DARKORANGE DARKORANGE GREEN RED YELLOW3 YELLOW3 } -nbcolors 7 -layers { 256 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 5 -shell 5 -face 53 -shape 353 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 18 -shell 18 -face 160 -freewire 0 -freeedge 0 -sharededge 126 -max_solid 18 -max_shell 18 -max_face 160 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.000062348e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
-
set filename PRO12761.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 9 ( 3 ) Summary = 9 ( 3 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 2 ( 2 ) Face = 36 ( 36 ) Summary = 281 ( 262 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 2 ( 2 ) Face = 36 ( 36 ) FreeWire = 0 ( 2 ) FreeEdge = 19 ( 19 ) SharedEdge = 107 ( 107 )
-TOLERANCE : MaxTol = 0.008665713529 ( 0.01506194194 ) AvgTol = 0.0006799119121 ( 0.001501244216 )
-LABELS : N0Labels = 3 ( 3 ) N1Labels = 2 ( 2 ) N2Labels = 0 ( 0 ) TotalLabels = 5 ( 5 ) NameLabels = 5 ( 5 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 3 -max_faults 0
+checkxstat D_First -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 2 -face 36 -shape 262
+checkstatshape res_1 -solid 0 -shell 2 -face 36 -freewire 2 -freeedge 19 -sharededge 107
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.01506194194 -avg 0.001501244216]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 3 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 2 -face 36 -shape 281 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 2 -face 36 -freewire 0 -freeedge 19 -sharededge 107 -max_solid 0 -max_shell 2 -max_face 36 -max_freewire 2 -max_freeedge 19
+checkmaxtol res_2 -tol 0.008665713529 -avg 0.0006799119121 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
-
set filename trj10_b2-id-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 1 ) Summary = 0 ( 1 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 1 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 221 ( 221 ) Summary = 1398 ( 1397 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 221 ( 221 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 576 ( 576 )
-TOLERANCE : MaxTol = 0.009952224089 ( 0.009952224089 ) AvgTol = 0.0007250477715 ( 0.000901206859 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 1 ( 1 ) Volume = 1 ( 1 ) Area = 1 ( 1 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = GRAY65 ( GRAY65 )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 1 -volume 1 -area 1 -colors { GRAY65 } -nbcolors 1 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 221 -shape 1397
+checkstatshape res_1 -solid 1 -shell 1 -face 221 -freewire 0 -freeedge 0 -sharededge 576
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.009952224089 -avg 0.000901206859]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 1 -volume 1 -area 1 -nbcolors 1 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 1 -volume 1 -area 1 -colors { GRAY65 } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 1 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 221 -shape 1398 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 221 -freewire 0 -freeedge 0 -sharededge 576 -max_solid 1 -max_shell 1 -max_face 221 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.009952224089 -avg 0.0007250477715 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: STATSHAPE : Faulty"
-
set filename PRO20362.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 2 ) Summary = 0 ( 2 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 2 ( 0 ) Face = 2 ( 2 ) Summary = 23 ( 21 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 2 ( 0 ) Face = 2 ( 2 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 8 ( 8 )
-TOLERANCE : MaxTol = 1e-007 ( 1.000123146e-007 ) AvgTol = 1e-007 ( 1.000053276e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 2 -shape 21
+checkstatshape res_1 -solid 0 -shell 0 -face 2 -freewire 0 -freeedge 0 -sharededge 8
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000123146e-007 -avg 1.000053276e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 2 -face 2 -shape 23 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 2 -face 2 -freewire 0 -freeedge 0 -sharededge 8 -max_solid 0 -max_shell 0 -max_face 2 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1e-007 -avg 1e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename trj2_as1-id-203.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 14 ( 14 ) Summary = 14 ( 14 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 5 ( 5 ) Shell = 5 ( 5 ) Face = 39 ( 39 ) Summary = 255 ( 255 )
-STATSHAPE : Solid = 18 ( 18 ) Shell = 18 ( 18 ) Face = 125 ( 125 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 84 ( 84 )
-TOLERANCE : MaxTol = 1e-007 ( 1e-007 ) AvgTol = 1e-007 ( 1e-007 )
-LABELS : N0Labels = 9 ( 9 ) N1Labels = 13 ( 17 ) N2Labels = 0 ( 4 ) TotalLabels = 22 ( 30 ) NameLabels = 22 ( 22 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 6 ( 6 ) Volume = 6 ( 6 ) Area = 6 ( 6 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 14 -max_faults 0
+checkxstat D_First -n0 9 -n1 17 -n2 4 -total 30 -withname 22 -withcolor 0 -withlayer 0 -centroid 6 -volume 6 -area 6 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 5 -shell 5 -face 39 -shape 255
+checkstatshape res_1 -solid 18 -shell 18 -face 125 -freewire 0 -freeedge 0 -sharededge 84
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-007 -avg 1e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 14 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 14 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 9 -n1 17 -n2 4 -total 30 -withname 22 -withcolor 0 -withlayer 0 -centroid 6 -volume 6 -area 6 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 9 -n1 13 -n2 0 -total 22 -withname 22 -withcolor 0 -withlayer 0 -centroid 6 -volume 6 -area 6 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 5 -shell 5 -face 39 -shape 255 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 18 -shell 18 -face 125 -freewire 0 -freeedge 0 -sharededge 84 -max_solid 18 -max_shell 18 -max_face 125 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1e-007 -avg 1e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: STATSHAPE : Faulty"
-
set filename PRO7755.stp
-set ref_data {
-DATA : Faulties = 0 ( 1 ) Warnings = 0 ( 1 ) Summary = 0 ( 2 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 1 ( 1 ) Summary = 1 ( 1 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 14 ( 10 ) Face = 14 ( 14 ) Summary = 184 ( 155 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 14 ( 10 ) Face = 14 ( 14 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 56 ( 50 )
-TOLERANCE : MaxTol = 0.0001957201735 ( 0.005490898223 ) AvgTol = 3.286972717e-05 ( 0.0004776973929 )
-LABELS : N0Labels = 3 ( 3 ) N1Labels = 2 ( 2 ) N2Labels = 0 ( 0 ) TotalLabels = 5 ( 5 ) NameLabels = 5 ( 5 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 1 -max_faults 1
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+checkxstat D_First -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 10 -face 14 -shape 155
+checkstatshape res_1 -solid 0 -shell 10 -face 14 -freewire 0 -freeedge 0 -sharededge 50
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.005490898223 -avg 0.0004776973929]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 1 -max_faults 1
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 14 -face 14 -shape 184 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 14 -face 14 -freewire 0 -freeedge 0 -sharededge 56 -max_solid 0 -max_shell 10 -max_face 14 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.0001957201735 -avg 3.286972717e-05 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename trj8_k1-hc-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 2 ) Warnings = 0 ( 0 ) Summary = 0 ( 2 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 6 ( 1 ) Summary = 6 ( 1 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 52 ( 52 ) Face = 52 ( 52 ) Summary = 1126 ( 942 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 52 ( 52 ) Face = 52 ( 52 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 484 ( 484 )
-TOLERANCE : MaxTol = 0.002730674215 ( 0.0116718272 ) AvgTol = 0.000209395694 ( 0.001020276868 )
-LABELS : N0Labels = 2 ( 2 ) N1Labels = 105 ( 53 ) N2Labels = 0 ( 0 ) TotalLabels = 107 ( 55 ) NameLabels = 3 ( 3 ) ColorLabels = 104 ( 53 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 1 ( 1 ) Volume = 1 ( 1 ) Area = 1 ( 1 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = WHITE ( WHITE )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 6 -max_faults 2
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+checkxstat D_First -n0 2 -n1 53 -n2 0 -total 55 -withname 3 -withcolor 53 -withlayer 0 -centroid 1 -volume 1 -area 1 -colors { WHITE } -nbcolors 1 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 52 -face 52 -shape 942
+checkstatshape res_1 -solid 0 -shell 52 -face 52 -freewire 0 -freeedge 0 -sharededge 484
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.0116718272 -avg 0.001020276868]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 6 -max_faults 2
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 2 -n1 53 -n2 0 -total 55 -withname 3 -withcolor 53 -withlayer 0 -centroid 1 -volume 1 -area 1 -nbcolors 1 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 2 -n1 105 -n2 0 -total 107 -withname 3 -withcolor 104 -withlayer 0 -centroid 1 -volume 1 -area 1 -colors { WHITE } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 52 -face 52 -shape 1126 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 52 -face 52 -freewire 0 -freeedge 0 -sharededge 484 -max_solid 0 -max_shell 52 -max_face 52 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.002730674215 -avg 0.000209395694 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LAYERS : Faulty"
-
set filename tr10_r0701_db.stp
-set ref_data {
-DATA : Faulties = 0 ( 918 ) Warnings = 0 ( 0 ) Summary = 0 ( 918 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 30 ( 30 ) Summary = 30 ( 30 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 35 ( 35 ) Summary = 223 ( 223 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 35 ( 35 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 82 ( 82 )
-TOLERANCE : MaxTol = 4.199313252e-05 ( 4.297107017e-05 ) AvgTol = 1.375200154e-05 ( 1.381138283e-05 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 1 ( 1 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = WHITE ( WHITE )
-NLAYERS : NLayers = 1 ( 2 )
-LAYERS : Layers = 2 ( { 0} { 2} )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 918
+checkdoc "tpstat c" -max_warns 30 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { } -nblayers 2
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 35 -shape 223
+checkstatshape res_1 -solid 1 -shell 1 -face 35 -freewire 0 -freeedge 0 -sharededge 82
+set max_tol_res_1 [checkmaxtol res_1 -tol 4.297107017e-05 -avg 1.381138283e-05]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 918
+checkdoc "tpstat c" -max_warns 30 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 30 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 2
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 35 -shape 223 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 35 -freewire 0 -freeedge 0 -sharededge 82 -max_solid 1 -max_shell 1 -max_face 35 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 4.199313252e-05 -avg 1.375200154e-05 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename trj3_as1-id-203.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 14 ( 14 ) Summary = 14 ( 14 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 5 ( 5 ) Shell = 5 ( 5 ) Face = 39 ( 39 ) Summary = 255 ( 255 )
-STATSHAPE : Solid = 18 ( 18 ) Shell = 18 ( 18 ) Face = 125 ( 125 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 84 ( 84 )
-TOLERANCE : MaxTol = 1e-007 ( 1e-007 ) AvgTol = 1e-007 ( 1e-007 )
-LABELS : N0Labels = 9 ( 9 ) N1Labels = 13 ( 17 ) N2Labels = 0 ( 4 ) TotalLabels = 22 ( 30 ) NameLabels = 22 ( 22 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 6 ( 6 ) Volume = 6 ( 6 ) Area = 6 ( 6 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 14 -max_faults 0
+checkxstat D_First -n0 9 -n1 17 -n2 4 -total 30 -withname 22 -withcolor 0 -withlayer 0 -centroid 6 -volume 6 -area 6 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 5 -shell 5 -face 39 -shape 255
+checkstatshape res_1 -solid 18 -shell 18 -face 125 -freewire 0 -freeedge 0 -sharededge 84
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-007 -avg 1e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 14 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 14 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 9 -n1 17 -n2 4 -total 30 -withname 22 -withcolor 0 -withlayer 0 -centroid 6 -volume 6 -area 6 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 9 -n1 13 -n2 0 -total 22 -withname 22 -withcolor 0 -withlayer 0 -centroid 6 -volume 6 -area 6 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 5 -shell 5 -face 39 -shape 255 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 18 -shell 18 -face 125 -freewire 0 -freeedge 0 -sharededge 84 -max_solid 18 -max_shell 18 -max_face 125 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1e-007 -avg 1e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
set filename trj9_b2-ai-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 8 ( 38 ) Summary = 8 ( 38 )
-CHECKSHAPE : Wires = 1 ( 1 ) Faces = 1 ( 1 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 221 ( 221 ) Summary = 1465 ( 1463 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 221 ( 221 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 610 ( 610 )
-TOLERANCE : MaxTol = 0.004950186716 ( 0.004950186717 ) AvgTol = 0.0003553188051 ( 0.0003621212346 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 1 ( 1 ) Volume = 1 ( 1 ) Area = 1 ( 1 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = YELLOW ( YELLOW )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 38 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 1 -volume 1 -area 1 -colors { YELLOW } -nbcolors 1 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 1 -max_faces 1 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 221 -shape 1463
+checkstatshape res_1 -solid 1 -shell 1 -face 221 -freewire 0 -freeedge 0 -sharededge 610
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.004950186717 -avg 0.0003621212346]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 38 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 8 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 1 -volume 1 -area 1 -nbcolors 1 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 1 -volume 1 -area 1 -colors { YELLOW } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 1 -max_faces 1 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 1 -max_faces 1 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 221 -shape 1465 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 221 -freewire 0 -freeedge 0 -sharededge 610 -max_solid 1 -max_shell 1 -max_face 221 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.004950186716 -avg 0.0003553188051 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename trj3_pm1-ac-203.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 7 ( 7 ) Shell = 7 ( 7 ) Face = 132 ( 132 ) Summary = 839 ( 839 )
-STATSHAPE : Solid = 7 ( 7 ) Shell = 7 ( 7 ) Face = 132 ( 132 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 328 ( 328 )
-TOLERANCE : MaxTol = 0.0003598691586 ( 0.0003598691585 ) AvgTol = 3.390213599e-005 ( 3.390213595e-005 )
-LABELS : N0Labels = 8 ( 8 ) N1Labels = 7 ( 8 ) N2Labels = 0 ( 1 ) TotalLabels = 15 ( 17 ) NameLabels = 15 ( 15 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 8 -n1 8 -n2 1 -total 17 -withname 15 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 7 -shell 7 -face 132 -shape 839
+checkstatshape res_1 -solid 7 -shell 7 -face 132 -freewire 0 -freeedge 0 -sharededge 328
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.0003598691585 -avg 3.390213595e-005]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 8 -n1 8 -n2 1 -total 17 -withname 15 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 8 -n1 7 -n2 0 -total 15 -withname 15 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 7 -shell 7 -face 132 -shape 839 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 7 -shell 7 -face 132 -freewire 0 -freeedge 0 -sharededge 328 -max_solid 7 -max_shell 7 -max_face 132 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.0003598691586 -avg 3.390213599e-005 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename mat-a.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 50 ( 20 ) Summary = 50 ( 20 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 3 ( 3 ) Shell = 3 ( 3 ) Face = 113 ( 113 ) Summary = 903 ( 890 )
-STATSHAPE : Solid = 3 ( 3 ) Shell = 3 ( 3 ) Face = 113 ( 113 ) FreeWire = 0 ( 0 ) FreeEdge = 12 ( 12 ) SharedEdge = 354 ( 354 )
-TOLERANCE : MaxTol = 0.0009825722198 ( 0.0009825722195 ) AvgTol = 0.0001141911607 ( 0.00011283487 )
-LABELS : N0Labels = 3 ( 3 ) N1Labels = 2 ( 3 ) N2Labels = 0 ( 1 ) TotalLabels = 5 ( 7 ) NameLabels = 5 ( 5 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 20 -max_faults 0
+checkxstat D_First -n0 3 -n1 3 -n2 1 -total 7 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 3 -shell 3 -face 113 -shape 890
+checkstatshape res_1 -solid 3 -shell 3 -face 113 -freewire 0 -freeedge 12 -sharededge 354
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.0009825722195 -avg 0.00011283487]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 20 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 50 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3 -n1 3 -n2 1 -total 7 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 3 -shell 3 -face 113 -shape 903 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 3 -shell 3 -face 113 -freewire 0 -freeedge 12 -sharededge 354 -max_solid 3 -max_shell 3 -max_face 113 -max_freewire 0 -max_freeedge 12
+checkmaxtol res_2 -tol 0.0009825722198 -avg 0.0001141911607 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename mat-bas.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 50 ( 20 ) Summary = 50 ( 20 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 3 ( 3 ) Shell = 3 ( 3 ) Face = 127 ( 127 ) Summary = 1022 ( 1008 )
-STATSHAPE : Solid = 3 ( 3 ) Shell = 3 ( 3 ) Face = 127 ( 127 ) FreeWire = 0 ( 0 ) FreeEdge = 13 ( 13 ) SharedEdge = 403 ( 403 )
-TOLERANCE : MaxTol = 0.0009825722198 ( 0.0009825722195 ) AvgTol = 0.0001005178352 ( 9.932550373e-005 )
-LABELS : N0Labels = 3 ( 3 ) N1Labels = 2 ( 3 ) N2Labels = 0 ( 1 ) TotalLabels = 5 ( 7 ) NameLabels = 5 ( 5 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 20 -max_faults 0
+checkxstat D_First -n0 3 -n1 3 -n2 1 -total 7 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 3 -shell 3 -face 127 -shape 1008
+checkstatshape res_1 -solid 3 -shell 3 -face 127 -freewire 0 -freeedge 13 -sharededge 403
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.0009825722195 -avg 9.932550373e-005]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 20 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 50 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3 -n1 3 -n2 1 -total 7 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 3 -shell 3 -face 127 -shape 1022 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 3 -shell 3 -face 127 -freewire 0 -freeedge 13 -sharededge 403 -max_solid 3 -max_shell 3 -max_face 127 -max_freewire 0 -max_freeedge 13
+checkmaxtol res_2 -tol 0.0009825722198 -avg 0.0001005178352 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename attach-coupe.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 60 ( 0 ) Summary = 60 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 4 ( 4 ) Shell = 4 ( 4 ) Face = 101 ( 101 ) Summary = 766 ( 766 )
-STATSHAPE : Solid = 4 ( 4 ) Shell = 4 ( 4 ) Face = 101 ( 101 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 309 ( 309 )
-TOLERANCE : MaxTol = 6.488976221e-006 ( 6.488964752e-006 ) AvgTol = 8.674639415e-007 ( 8.674623235e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 1 ) N2Labels = 0 ( 1 ) TotalLabels = 1 ( 3 ) NameLabels = 1 ( 2 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 1 -n2 1 -total 3 -withname 2 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 4 -shell 4 -face 101 -shape 766
+checkstatshape res_1 -solid 4 -shell 4 -face 101 -freewire 0 -freeedge 0 -sharededge 309
+set max_tol_res_1 [checkmaxtol res_1 -tol 6.488964752e-006 -avg 8.674623235e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 60 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 1 -n2 1 -total 3 -withname 2 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 4 -shell 4 -face 101 -shape 766 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 4 -shell 4 -face 101 -freewire 0 -freeedge 0 -sharededge 309 -max_solid 4 -max_shell 4 -max_face 101 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 6.488976221e-006 -avg 8.674639415e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename attache-av.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 48 ( 0 ) Summary = 48 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 2 ( 2 ) Shell = 2 ( 2 ) Face = 76 ( 76 ) Summary = 589 ( 589 )
-STATSHAPE : Solid = 2 ( 2 ) Shell = 2 ( 2 ) Face = 76 ( 76 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 240 ( 240 )
-TOLERANCE : MaxTol = 6.488976221e-006 ( 6.488964752e-006 ) AvgTol = 8.918120201e-007 ( 8.918103551e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 1 ) N2Labels = 0 ( 1 ) TotalLabels = 1 ( 3 ) NameLabels = 1 ( 2 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 1 -n2 1 -total 3 -withname 2 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 2 -shell 2 -face 76 -shape 589
+checkstatshape res_1 -solid 2 -shell 2 -face 76 -freewire 0 -freeedge 0 -sharededge 240
+set max_tol_res_1 [checkmaxtol res_1 -tol 6.488964752e-006 -avg 8.918103551e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 48 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 1 -n2 1 -total 3 -withname 2 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 2 -shell 2 -face 76 -shape 589 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 2 -shell 2 -face 76 -freewire 0 -freeedge 0 -sharededge 240 -max_solid 2 -max_shell 2 -max_face 76 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 6.488976221e-006 -avg 8.918120201e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
-
set filename obtu.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 21 ( 20 ) Summary = 21 ( 20 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 72 ( 72 ) Summary = 464 ( 464 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 72 ( 72 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 200 ( 200 )
-TOLERANCE : MaxTol = 0.09179894095 ( 0.157293174 ) AvgTol = 0.03046479329 ( 0.04644836897 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 20 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 1 -face 72 -shape 464
+checkstatshape res_1 -solid 0 -shell 1 -face 72 -freewire 0 -freeedge 0 -sharededge 200
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.157293174 -avg 0.04644836897]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 20 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 21 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 1 -face 72 -shape 464 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 1 -face 72 -freewire 0 -freeedge 0 -sharededge 200 -max_solid 0 -max_shell 1 -max_face 72 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.09179894095 -avg 0.03046479329 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
puts "TODO CR23096 ALL: STATSHAPE : Faulty"
-
set filename bm1_db_fuel.stp
-set ref_data {
-DATA : Faulties = 0 ( 1 ) Warnings = 0 ( 1 ) Summary = 0 ( 2 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 5 ( 3 ) Summary = 5 ( 3 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 10 ( 4 ) Face = 10 ( 10 ) Summary = 488 ( 391 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 10 ( 4 ) Face = 10 ( 10 ) FreeWire = 0 ( 0 ) FreeEdge = 76 ( 76 ) SharedEdge = 119 ( 114 )
-TOLERANCE : MaxTol = 0.02472973215 ( 0.08317402537 ) AvgTol = 0.0003248680422 ( 0.002905657442 )
-LABELS : N0Labels = 3 ( 3 ) N1Labels = 2 ( 2 ) N2Labels = 0 ( 0 ) TotalLabels = 5 ( 5 ) NameLabels = 5 ( 5 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 1 -max_faults 1
+checkdoc "tpstat c" -max_warns 3 -max_faults 0
+checkxstat D_First -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 4 -face 10 -shape 391
+checkstatshape res_1 -solid 0 -shell 4 -face 10 -freewire 0 -freeedge 76 -sharededge 114
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.08317402537 -avg 0.002905657442]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 1 -max_faults 1
+checkdoc "tpstat c" -max_warns 3 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 5 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 10 -face 10 -shape 488 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 10 -face 10 -freewire 0 -freeedge 76 -sharededge 119 -max_solid 0 -max_shell 4 -max_face 10 -max_freewire 0 -max_freeedge 76
+checkmaxtol res_2 -tol 0.02472973215 -avg 0.0003248680422 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: STATSHAPE : Faulty"
-
set filename trj4_k1_geo-md-203.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 6 ( 6 ) Summary = 6 ( 6 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 39 ( 0 ) Face = 39 ( 39 ) Summary = 492 ( 455 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 39 ( 0 ) Face = 39 ( 39 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 193 ( 192 )
-TOLERANCE : MaxTol = 0.003673630603 ( 0.003673630602 ) AvgTol = 0.0002911716538 ( 0.0002911716555 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 6 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 39 -shape 455
+checkstatshape res_1 -solid 0 -shell 0 -face 39 -freewire 0 -freeedge 0 -sharededge 192
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.003673630602 -avg 0.0002911716555]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 6 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 6 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 39 -face 39 -shape 492 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 39 -face 39 -freewire 0 -freeedge 0 -sharededge 193 -max_solid 0 -max_shell 0 -max_face 39 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.003673630603 -avg 0.0002911716538 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: STATSHAPE : Faulty"
-
set filename trj4_k1_geo-pe-203.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 8 ) Summary = 0 ( 8 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 52 ( 0 ) Face = 52 ( 52 ) Summary = 1228 ( 1045 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 52 ( 0 ) Face = 52 ( 52 ) FreeWire = 0 ( 0 ) FreeEdge = 131 ( 131 ) SharedEdge = 405 ( 405 )
-TOLERANCE : MaxTol = 0.007319568061 ( 0.01121716749 ) AvgTol = 0.00018368769 ( 0.0003721357713 )
-LABELS : N0Labels = 3 ( 3 ) N1Labels = 2 ( 2 ) N2Labels = 0 ( 0 ) TotalLabels = 5 ( 5 ) NameLabels = 5 ( 5 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 8 -max_faults 0
+checkxstat D_First -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 52 -shape 1045
+checkstatshape res_1 -solid 0 -shell 0 -face 52 -freewire 0 -freeedge 131 -sharededge 405
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.01121716749 -avg 0.0003721357713]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 8 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 52 -face 52 -shape 1228 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 52 -face 52 -freewire 0 -freeedge 131 -sharededge 405 -max_solid 0 -max_shell 0 -max_face 52 -max_freewire 0 -max_freeedge 131
+checkmaxtol res_2 -tol 0.007319568061 -avg 0.00018368769 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: STATSHAPE : Faulty"
-
set filename trj4_k1_geo-pe-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 8 ) Summary = 0 ( 8 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 52 ( 0 ) Face = 52 ( 52 ) Summary = 1228 ( 1045 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 52 ( 0 ) Face = 52 ( 52 ) FreeWire = 0 ( 0 ) FreeEdge = 131 ( 131 ) SharedEdge = 405 ( 405 )
-TOLERANCE : MaxTol = 0.007319568061 ( 0.01121716749 ) AvgTol = 0.00018368769 ( 0.0003721357713 )
-LABELS : N0Labels = 3 ( 3 ) N1Labels = 2 ( 2 ) N2Labels = 0 ( 0 ) TotalLabels = 5 ( 5 ) NameLabels = 5 ( 5 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 1 ( 1 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 8 -max_faults 0
+checkxstat D_First -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 1 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 52 -shape 1045
+checkstatshape res_1 -solid 0 -shell 0 -face 52 -freewire 0 -freeedge 131 -sharededge 405
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.01121716749 -avg 0.0003721357713]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 8 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 1 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 1 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 52 -face 52 -shape 1228 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 52 -face 52 -freewire 0 -freeedge 131 -sharededge 405 -max_solid 0 -max_shell 0 -max_face 52 -max_freewire 0 -max_freeedge 131
+checkmaxtol res_2 -tol 0.007319568061 -avg 0.00018368769 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
puts "TODO CR23096 ALL: CHECKSHAPE : Faulty"
-set LinuxDiff 2
set filename bm1_sy_exhaust.stp
-set ref_data {
-DATA : Faulties = 0 ( 19 ) Warnings = 0 ( 2 ) Summary = 0 ( 21 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 21 ( 12 ) Summary = 21 ( 12 )
-CHECKSHAPE : Wires = 6 ( 1 ) Faces = 6 ( 1 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 4 ( 4 ) Shell = 4 ( 4 ) Face = 35 ( 35 ) Summary = 289 ( 266 )
-STATSHAPE : Solid = 4 ( 4 ) Shell = 4 ( 4 ) Face = 35 ( 35 ) FreeWire = 0 ( 0 ) FreeEdge = 24 ( 24 ) SharedEdge = 103 ( 103 )
-TOLERANCE : MaxTol = 6.104502198e-06 ( 1e-05 ) AvgTol = 9.28336616e-07 ( 2.903661931e-06 )
-LABELS : N0Labels = 4 ( 4 ) N1Labels = 31 ( 31 ) N2Labels = 0 ( 0 ) TotalLabels = 35 ( 35 ) NameLabels = 7 ( 7 ) ColorLabels = 28 ( 28 ) LayerLabels = 28 ( 28 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = CHOCOLATE1 RED ( CHOCOLATE1 RED )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = {} ( {} )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 2 -max_faults 19
+checkdoc "tpstat c" -max_warns 12 -max_faults 0
+checkxstat D_First -n0 4 -n1 31 -n2 0 -total 35 -withname 7 -withcolor 28 -withlayer 28 -centroid 0 -volume 0 -area 0 -colors { CHOCOLATE1 RED } -nbcolors 2 -layers { "" } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 1 -max_faces 1 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 4 -shell 4 -face 35 -shape 266
+checkstatshape res_1 -solid 4 -shell 4 -face 35 -freewire 0 -freeedge 24 -sharededge 103
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-05 -avg 2.903661931e-06]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 2 -max_faults 19
+checkdoc "tpstat c" -max_warns 12 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 21 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 4 -n1 31 -n2 0 -total 35 -withname 7 -withcolor 28 -withlayer 28 -centroid 0 -volume 0 -area 0 -nbcolors 2 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 4 -n1 31 -n2 0 -total 35 -withname 7 -withcolor 28 -withlayer 28 -centroid 0 -volume 0 -area 0 -colors { CHOCOLATE1 RED } -nbcolors 2 -layers { "" } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 1 -max_faces 1 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 6 -max_faces 6 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 4 -shell 4 -face 35 -shape 289 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 4 -shell 4 -face 35 -freewire 0 -freeedge 24 -sharededge 103 -max_solid 4 -max_shell 4 -max_face 35 -max_freewire 0 -max_freeedge 24
+checkmaxtol res_2 -tol 6.104502198e-06 -avg 9.28336616e-07 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: CHECKSHAPE : Faulty"
-
set filename r0701_ug.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 3 ( 20 ) Summary = 3 ( 20 )
-CHECKSHAPE : Wires = 2 ( 0 ) Faces = 2 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 26 ( 26 ) Summary = 176 ( 176 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 26 ( 26 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 72 ( 71 )
-TOLERANCE : MaxTol = 1.497099698e-005 ( 1.497099622e-005 ) AvgTol = 2.636598482e-006 ( 7.760927924e-006 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = MEDIUMSEAGREEN ( MEDIUMSEAGREEN )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 20 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { MEDIUMSEAGREEN } -nbcolors 1 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 26 -shape 176
+checkstatshape res_1 -solid 1 -shell 1 -face 26 -freewire 0 -freeedge 0 -sharededge 71
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.497099622e-005 -avg 7.760927924e-006]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 20 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { MEDIUMSEAGREEN } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 2 -max_faces 2 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 26 -shape 176 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 26 -freewire 0 -freeedge 0 -sharededge 72 -max_solid 1 -max_shell 1 -max_face 26 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.497099698e-005 -avg 2.636598482e-006 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: STATSHAPE : Faulty"
-
set filename bm2_ct_leverrod-A.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 6 ( 1 ) Summary = 6 ( 1 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 5 ( 1 ) Face = 78 ( 78 ) Summary = 510 ( 506 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 5 ( 1 ) Face = 78 ( 78 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 206 ( 206 )
-TOLERANCE : MaxTol = 0.005871790092 ( 0.01255641392 ) AvgTol = 0.0001232801436 ( 0.0004487678765 )
-LABELS : N0Labels = 3 ( 3 ) N1Labels = 2 ( 2 ) N2Labels = 0 ( 0 ) TotalLabels = 5 ( 5 ) NameLabels = 5 ( 5 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+checkxstat D_First -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 78 -shape 506
+checkstatshape res_1 -solid 1 -shell 1 -face 78 -freewire 0 -freeedge 0 -sharededge 206
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.01255641392 -avg 0.0004487678765]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 5 -face 78 -shape 510 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 5 -face 78 -freewire 0 -freeedge 0 -sharededge 206 -max_solid 1 -max_shell 1 -max_face 78 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.005871790092 -avg 0.0001232801436 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj4_s1-ai-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 54 ) Warnings = 0 ( 0 ) Summary = 0 ( 54 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 2 ( 51 ) Summary = 2 ( 51 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 8 ( 8 ) Shell = 10 ( 10 ) Face = 108 ( 108 ) Summary = 603 ( 603 )
-STATSHAPE : Solid = 8 ( 8 ) Shell = 10 ( 10 ) Face = 108 ( 108 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 212 ( 212 )
-TOLERANCE : MaxTol = 0.0007308879226 ( 0.002238579085 ) AvgTol = 1.588313862e-05 ( 3.376786703e-05 )
-LABELS : N0Labels = 9 ( 9 ) N1Labels = 8 ( 8 ) N2Labels = 0 ( 0 ) TotalLabels = 17 ( 17 ) NameLabels = 17 ( 17 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 1 ( 1 ) Volume = 1 ( 1 ) Area = 1 ( 1 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 54
+checkdoc "tpstat c" -max_warns 51 -max_faults 0
+checkxstat D_First -n0 9 -n1 8 -n2 0 -total 17 -withname 17 -withcolor 0 -withlayer 0 -centroid 1 -volume 1 -area 1 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 8 -shell 10 -face 108 -shape 603
+checkstatshape res_1 -solid 8 -shell 10 -face 108 -freewire 0 -freeedge 0 -sharededge 212
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.002238579085 -avg 3.376786703e-05]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 54
+checkdoc "tpstat c" -max_warns 51 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 9 -n1 8 -n2 0 -total 17 -withname 17 -withcolor 0 -withlayer 0 -centroid 1 -volume 1 -area 1 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 9 -n1 8 -n2 0 -total 17 -withname 17 -withcolor 0 -withlayer 0 -centroid 1 -volume 1 -area 1 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 8 -shell 10 -face 108 -shape 603 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 8 -shell 10 -face 108 -freewire 0 -freeedge 0 -sharededge 212 -max_solid 8 -max_shell 10 -max_face 108 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.0007308879226 -avg 1.588313862e-05 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename trj5_k1-ct-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 1 ( 1 ) Summary = 1 ( 1 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 58 ( 58 ) Face = 58 ( 58 ) Summary = 837 ( 475 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 58 ( 58 ) Face = 58 ( 58 ) FreeWire = 0 ( 16 ) FreeEdge = 16 ( 16 ) SharedEdge = 312 ( 165 )
-TOLERANCE : MaxTol = 0.0008167207419 ( 0.0009782609385 ) AvgTol = 5.20029758e-005 ( 0.0001030777287 )
-LABELS : N0Labels = 3 ( 3 ) N1Labels = 60 ( 76 ) N2Labels = 0 ( 0 ) TotalLabels = 63 ( 79 ) NameLabels = 5 ( 5 ) ColorLabels = 58 ( 74 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = WHITE ( WHITE )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+checkxstat D_First -n0 3 -n1 76 -n2 0 -total 79 -withname 5 -withcolor 74 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 58 -face 58 -shape 475
+checkstatshape res_1 -solid 0 -shell 58 -face 58 -freewire 16 -freeedge 16 -sharededge 165
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.0009782609385 -avg 0.0001030777287]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3 -n1 76 -n2 0 -total 79 -withname 5 -withcolor 74 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 60 -n2 0 -total 63 -withname 5 -withcolor 58 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 58 -face 58 -shape 837 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 58 -face 58 -freewire 0 -freeedge 16 -sharededge 312 -max_solid 0 -max_shell 58 -max_face 58 -max_freewire 16 -max_freeedge 16
+checkmaxtol res_2 -tol 0.0008167207419 -avg 5.20029758e-005 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: STATSHAPE : Faulty"
-
set filename bm2_id_t4-B.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 13 ( 0 ) Face = 13 ( 13 ) Summary = 142 ( 129 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 13 ( 0 ) Face = 13 ( 13 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 50 ( 50 )
-TOLERANCE : MaxTol = 0.004158901542 ( 0.004158901545 ) AvgTol = 0.000667854186 ( 0.00066785418 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 13 -shape 129
+checkstatshape res_1 -solid 0 -shell 0 -face 13 -freewire 0 -freeedge 0 -sharededge 50
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.004158901545 -avg 0.00066785418]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 13 -face 13 -shape 142 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 13 -face 13 -freewire 0 -freeedge 0 -sharededge 50 -max_solid 0 -max_shell 0 -max_face 13 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.004158901542 -avg 0.000667854186 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename spigot1.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 4 ( 6 ) Summary = 4 ( 6 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 3 ( 3 ) Shell = 3 ( 3 ) Face = 68 ( 68 ) Summary = 527 ( 503 )
-STATSHAPE : Solid = 3 ( 3 ) Shell = 3 ( 3 ) Face = 68 ( 68 ) FreeWire = 0 ( 0 ) FreeEdge = 23 ( 23 ) SharedEdge = 192 ( 192 )
-TOLERANCE : MaxTol = 0.0004859880214 ( 0.0004859879605 ) AvgTol = 3.07679873e-005 ( 3.076976385e-005 )
-LABELS : N0Labels = 3 ( 3 ) N1Labels = 2 ( 3 ) N2Labels = 0 ( 1 ) TotalLabels = 5 ( 7 ) NameLabels = 5 ( 5 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 6 -max_faults 0
+checkxstat D_First -n0 3 -n1 3 -n2 1 -total 7 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 3 -shell 3 -face 68 -shape 503
+checkstatshape res_1 -solid 3 -shell 3 -face 68 -freewire 0 -freeedge 23 -sharededge 192
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.0004859879605 -avg 3.076976385e-005]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 6 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3 -n1 3 -n2 1 -total 7 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 3 -shell 3 -face 68 -shape 527 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 3 -shell 3 -face 68 -freewire 0 -freeedge 23 -sharededge 192 -max_solid 3 -max_shell 3 -max_face 68 -max_freewire 0 -max_freeedge 23
+checkmaxtol res_2 -tol 0.0004859880214 -avg 3.07679873e-005 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: PROPS : Faulty"
-
set filename trj6_as1-ec-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 5 ( 5 ) Shell = 5 ( 5 ) Face = 53 ( 53 ) Summary = 353 ( 353 )
-STATSHAPE : Solid = 18 ( 18 ) Shell = 18 ( 18 ) Face = 160 ( 160 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 126 ( 126 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1.000100003e-007 ) AvgTol = 1.000062348e-007 ( 1.000062348e-007 )
-LABELS : N0Labels = 9 ( 9 ) N1Labels = 13 ( 13 ) N2Labels = 0 ( 0 ) TotalLabels = 22 ( 22 ) NameLabels = 22 ( 22 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 9 ( 22 ) Volume = 9 ( 9 ) Area = 9 ( 9 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 9 -n1 13 -n2 0 -total 22 -withname 22 -withcolor 0 -withlayer 0 -centroid 22 -volume 9 -area 9 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 5 -shell 5 -face 53 -shape 353
+checkstatshape res_1 -solid 18 -shell 18 -face 160 -freewire 0 -freeedge 0 -sharededge 126
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-007 -avg 1.000062348e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 9 -n1 13 -n2 0 -total 22 -withname 22 -withcolor 0 -withlayer 0 -centroid 22 -volume 9 -area 9 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 9 -n1 13 -n2 0 -total 22 -withname 22 -withcolor 0 -withlayer 0 -centroid 9 -volume 9 -area 9 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 5 -shell 5 -face 53 -shape 353 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 18 -shell 18 -face 160 -freewire 0 -freeedge 0 -sharededge 126 -max_solid 18 -max_shell 18 -max_face 160 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.000062348e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: PROPS : Faulty"
-
set filename trj6_as1-id-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 14 ( 14 ) Summary = 14 ( 14 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 5 ( 5 ) Shell = 5 ( 5 ) Face = 39 ( 39 ) Summary = 301 ( 289 )
-STATSHAPE : Solid = 18 ( 18 ) Shell = 18 ( 18 ) Face = 125 ( 125 ) FreeWire = 0 ( 0 ) FreeEdge = 24 ( 24 ) SharedEdge = 96 ( 96 )
-TOLERANCE : MaxTol = 1e-007 ( 1e-007 ) AvgTol = 1e-007 ( 1e-007 )
-LABELS : N0Labels = 11 ( 11 ) N1Labels = 15 ( 15 ) N2Labels = 0 ( 0 ) TotalLabels = 26 ( 26 ) NameLabels = 26 ( 26 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 6 ( 19 ) Volume = 6 ( 6 ) Area = 6 ( 6 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 14 -max_faults 0
+checkxstat D_First -n0 11 -n1 15 -n2 0 -total 26 -withname 26 -withcolor 0 -withlayer 0 -centroid 19 -volume 6 -area 6 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 5 -shell 5 -face 39 -shape 289
+checkstatshape res_1 -solid 18 -shell 18 -face 125 -freewire 0 -freeedge 24 -sharededge 96
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-007 -avg 1e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 14 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 14 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 11 -n1 15 -n2 0 -total 26 -withname 26 -withcolor 0 -withlayer 0 -centroid 19 -volume 6 -area 6 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 11 -n1 15 -n2 0 -total 26 -withname 26 -withcolor 0 -withlayer 0 -centroid 6 -volume 6 -area 6 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 5 -shell 5 -face 39 -shape 301 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 18 -shell 18 -face 125 -freewire 0 -freeedge 24 -sharededge 96 -max_solid 18 -max_shell 18 -max_face 125 -max_freewire 0 -max_freeedge 24
+checkmaxtol res_2 -tol 1e-007 -avg 1e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: PROPS : Faulty"
-
set filename trj6_as1-pe-203.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 5 ( 5 ) Shell = 5 ( 5 ) Face = 53 ( 53 ) Summary = 353 ( 353 )
-STATSHAPE : Solid = 18 ( 18 ) Shell = 18 ( 18 ) Face = 160 ( 160 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 126 ( 126 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1.000100003e-007 ) AvgTol = 1.000062348e-007 ( 1.000062348e-007 )
-LABELS : N0Labels = 9 ( 9 ) N1Labels = 13 ( 13 ) N2Labels = 0 ( 0 ) TotalLabels = 22 ( 22 ) NameLabels = 22 ( 22 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 9 ( 22 ) Volume = 9 ( 9 ) Area = 9 ( 9 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 9 -n1 13 -n2 0 -total 22 -withname 22 -withcolor 0 -withlayer 0 -centroid 22 -volume 9 -area 9 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 5 -shell 5 -face 53 -shape 353
+checkstatshape res_1 -solid 18 -shell 18 -face 160 -freewire 0 -freeedge 0 -sharededge 126
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-007 -avg 1.000062348e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 9 -n1 13 -n2 0 -total 22 -withname 22 -withcolor 0 -withlayer 0 -centroid 22 -volume 9 -area 9 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 9 -n1 13 -n2 0 -total 22 -withname 22 -withcolor 0 -withlayer 0 -centroid 9 -volume 9 -area 9 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 5 -shell 5 -face 53 -shape 353 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 18 -shell 18 -face 160 -freewire 0 -freeedge 0 -sharededge 126 -max_solid 18 -max_shell 18 -max_face 160 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.000062348e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: PROPS : Faulty"
-
set filename trj6_as1-pe-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 5 ( 5 ) Shell = 5 ( 5 ) Face = 53 ( 53 ) Summary = 353 ( 353 )
-STATSHAPE : Solid = 18 ( 18 ) Shell = 18 ( 18 ) Face = 160 ( 160 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 126 ( 126 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1.000100003e-007 ) AvgTol = 1.000062348e-007 ( 1.000062348e-007 )
-LABELS : N0Labels = 9 ( 9 ) N1Labels = 13 ( 13 ) N2Labels = 0 ( 0 ) TotalLabels = 22 ( 22 ) NameLabels = 22 ( 22 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 9 ( 22 ) Volume = 9 ( 9 ) Area = 9 ( 9 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 9 -n1 13 -n2 0 -total 22 -withname 22 -withcolor 0 -withlayer 0 -centroid 22 -volume 9 -area 9 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 5 -shell 5 -face 53 -shape 353
+checkstatshape res_1 -solid 18 -shell 18 -face 160 -freewire 0 -freeedge 0 -sharededge 126
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-007 -avg 1.000062348e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 9 -n1 13 -n2 0 -total 22 -withname 22 -withcolor 0 -withlayer 0 -centroid 22 -volume 9 -area 9 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 9 -n1 13 -n2 0 -total 22 -withname 22 -withcolor 0 -withlayer 0 -centroid 9 -volume 9 -area 9 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 5 -shell 5 -face 53 -shape 353 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 18 -shell 18 -face 160 -freewire 0 -freeedge 0 -sharededge 126 -max_solid 18 -max_shell 18 -max_face 160 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.000062348e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: PROPS : Faulty"
-
set filename trj6_as1-tc-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 19 ) Summary = 0 ( 19 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 5 ( 5 ) Shell = 5 ( 5 ) Face = 53 ( 53 ) Summary = 353 ( 353 )
-STATSHAPE : Solid = 18 ( 18 ) Shell = 18 ( 18 ) Face = 160 ( 160 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 126 ( 126 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1.000100003e-007 ) AvgTol = 1.000062348e-007 ( 1.000062348e-007 )
-LABELS : N0Labels = 9 ( 9 ) N1Labels = 13 ( 13 ) N2Labels = 0 ( 0 ) TotalLabels = 22 ( 22 ) NameLabels = 22 ( 22 ) ColorLabels = 5 ( 5 ) LayerLabels = 5 ( 5 )
-PROPS : Centroid = 9 ( 22 ) Volume = 9 ( 9 ) Area = 9 ( 9 )
-NCOLORS : NColors = 5 ( 5 )
-COLORS : Colors = BLUE1 DARKORANGE GREEN RED YELLOW3 ( BLUE1 DARKORANGE GREEN RED YELLOW3 )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 000 ( 000 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 19 -max_faults 0
+checkxstat D_First -n0 9 -n1 13 -n2 0 -total 22 -withname 22 -withcolor 5 -withlayer 5 -centroid 22 -volume 9 -area 9 -colors { BLUE1 DARKORANGE GREEN RED YELLOW3 } -nbcolors 5 -layers { 000 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 5 -shell 5 -face 53 -shape 353
+checkstatshape res_1 -solid 18 -shell 18 -face 160 -freewire 0 -freeedge 0 -sharededge 126
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-007 -avg 1.000062348e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 19 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 9 -n1 13 -n2 0 -total 22 -withname 22 -withcolor 5 -withlayer 5 -centroid 22 -volume 9 -area 9 -nbcolors 5 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 9 -n1 13 -n2 0 -total 22 -withname 22 -withcolor 5 -withlayer 5 -centroid 9 -volume 9 -area 9 -colors { BLUE1 DARKORANGE GREEN RED YELLOW3 } -nbcolors 5 -layers { 000 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 5 -shell 5 -face 53 -shape 353 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 18 -shell 18 -face 160 -freewire 0 -freeedge 0 -sharededge 126 -max_solid 18 -max_shell 18 -max_face 160 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.000062348e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: PROPS : Faulty"
-
set filename trj6_as1-td-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 28 ( 50 ) Summary = 28 ( 50 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 5 ( 5 ) Shell = 5 ( 5 ) Face = 57 ( 57 ) Summary = 419 ( 414 )
-STATSHAPE : Solid = 18 ( 18 ) Shell = 18 ( 18 ) Face = 172 ( 172 ) FreeWire = 0 ( 0 ) FreeEdge = 4 ( 4 ) SharedEdge = 138 ( 138 )
-TOLERANCE : MaxTol = 7.163569395e-006 ( 7.163569395e-006 ) AvgTol = 2.382828029e-006 ( 2.382828029e-006 )
-LABELS : N0Labels = 14 ( 14 ) N1Labels = 20 ( 20 ) N2Labels = 0 ( 0 ) TotalLabels = 34 ( 34 ) NameLabels = 32 ( 32 ) ColorLabels = 7 ( 7 ) LayerLabels = 5 ( 5 )
-PROPS : Centroid = 11 ( 24 ) Volume = 11 ( 11 ) Area = 11 ( 11 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = WHITE ( WHITE )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 000 ( 000 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 50 -max_faults 0
+checkxstat D_First -n0 14 -n1 20 -n2 0 -total 34 -withname 32 -withcolor 7 -withlayer 5 -centroid 24 -volume 11 -area 11 -colors { WHITE } -nbcolors 1 -layers { 000 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 5 -shell 5 -face 57 -shape 414
+checkstatshape res_1 -solid 18 -shell 18 -face 172 -freewire 0 -freeedge 4 -sharededge 138
+set max_tol_res_1 [checkmaxtol res_1 -tol 7.163569395e-006 -avg 2.382828029e-006]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 50 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 28 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 14 -n1 20 -n2 0 -total 34 -withname 32 -withcolor 7 -withlayer 5 -centroid 24 -volume 11 -area 11 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 14 -n1 20 -n2 0 -total 34 -withname 32 -withcolor 7 -withlayer 5 -centroid 11 -volume 11 -area 11 -colors { WHITE } -nbcolors 1 -layers { 000 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 5 -shell 5 -face 57 -shape 419 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 18 -shell 18 -face 172 -freewire 0 -freeedge 4 -sharededge 138 -max_solid 18 -max_shell 18 -max_face 172 -max_freewire 0 -max_freeedge 4
+checkmaxtol res_2 -tol 7.163569395e-006 -avg 2.382828029e-006 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: PROPS : Faulty"
-
set filename trj6_as1-tu-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 19 ) Summary = 0 ( 19 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 5 ( 5 ) Shell = 5 ( 5 ) Face = 53 ( 53 ) Summary = 353 ( 353 )
-STATSHAPE : Solid = 18 ( 18 ) Shell = 18 ( 18 ) Face = 160 ( 160 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 126 ( 126 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1.000100003e-007 ) AvgTol = 1.000062348e-007 ( 1.000062348e-007 )
-LABELS : N0Labels = 9 ( 9 ) N1Labels = 35 ( 35 ) N2Labels = 0 ( 0 ) TotalLabels = 44 ( 44 ) NameLabels = 22 ( 22 ) ColorLabels = 27 ( 27 ) LayerLabels = 5 ( 5 )
-PROPS : Centroid = 9 ( 22 ) Volume = 9 ( 9 ) Area = 9 ( 9 )
-NCOLORS : NColors = 7 ( 7 )
-COLORS : Colors = BLUE1 DARKORANGE DARKORANGE GREEN RED YELLOW3 YELLOW3 ( BLUE1 DARKORANGE DARKORANGE GREEN RED YELLOW3 YELLOW3 )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 256 ( 256 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 19 -max_faults 0
+checkxstat D_First -n0 9 -n1 35 -n2 0 -total 44 -withname 22 -withcolor 27 -withlayer 5 -centroid 22 -volume 9 -area 9 -colors { BLUE1 DARKORANGE DARKORANGE GREEN RED YELLOW3 YELLOW3 } -nbcolors 7 -layers { 256 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 5 -shell 5 -face 53 -shape 353
+checkstatshape res_1 -solid 18 -shell 18 -face 160 -freewire 0 -freeedge 0 -sharededge 126
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-007 -avg 1.000062348e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 19 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 9 -n1 35 -n2 0 -total 44 -withname 22 -withcolor 27 -withlayer 5 -centroid 22 -volume 9 -area 9 -nbcolors 7 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 9 -n1 35 -n2 0 -total 44 -withname 22 -withcolor 27 -withlayer 5 -centroid 9 -volume 9 -area 9 -colors { BLUE1 DARKORANGE DARKORANGE GREEN RED YELLOW3 YELLOW3 } -nbcolors 7 -layers { 256 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 5 -shell 5 -face 53 -shape 353 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 18 -shell 18 -face 160 -freewire 0 -freeedge 0 -sharededge 126 -max_solid 18 -max_shell 18 -max_face 160 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.000062348e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: CHECKSHAPE : Faulty"
-
set filename tr10_r0301_ug.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 3 ( 20 ) Summary = 3 ( 20 )
-CHECKSHAPE : Wires = 2 ( 0 ) Faces = 2 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 26 ( 26 ) Summary = 176 ( 176 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 26 ( 26 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 72 ( 71 )
-TOLERANCE : MaxTol = 5.560731313e-005 ( 5.560731145e-005 ) AvgTol = 5.441976184e-006 ( 1.058517578e-005 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = MEDIUMSEAGREEN ( MEDIUMSEAGREEN )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 20 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { MEDIUMSEAGREEN } -nbcolors 1 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 26 -shape 176
+checkstatshape res_1 -solid 1 -shell 1 -face 26 -freewire 0 -freeedge 0 -sharededge 71
+set max_tol_res_1 [checkmaxtol res_1 -tol 5.560731145e-005 -avg 1.058517578e-005]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 20 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { MEDIUMSEAGREEN } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 2 -max_faces 2 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 26 -shape 176 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 26 -freewire 0 -freeedge 0 -sharededge 72 -max_solid 1 -max_shell 1 -max_face 26 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 5.560731313e-005 -avg 5.441976184e-006 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: STATSHAPE : Faulty"
set filename trj6_pm4-al-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 23 ( 0 ) Face = 23 ( 23 ) Summary = 242 ( 219 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 23 ( 0 ) Face = 23 ( 23 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 86 ( 86 )
-TOLERANCE : MaxTol = 0.002671632586 ( 0.07709825342 ) AvgTol = 0.0002710505192 ( 0.003694019644 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 23 ( 23 ) N2Labels = 0 ( 0 ) TotalLabels = 24 ( 24 ) NameLabels = 1 ( 1 ) ColorLabels = 23 ( 23 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = PALETURQUOISE4 ( PALETURQUOISE4 )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 23 -n2 0 -total 24 -withname 1 -withcolor 23 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { PALETURQUOISE4 } -nbcolors 1 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 23 -shape 219
+checkstatshape res_1 -solid 0 -shell 0 -face 23 -freewire 0 -freeedge 0 -sharededge 86
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.07709825342 -avg 0.003694019644]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 23 -n2 0 -total 24 -withname 1 -withcolor 23 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 23 -n2 0 -total 24 -withname 1 -withcolor 23 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { PALETURQUOISE4 } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 23 -face 23 -shape 242 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 23 -face 23 -freewire 0 -freeedge 0 -sharededge 86 -max_solid 0 -max_shell 0 -max_face 23 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.002671632586 -avg 0.0002710505192 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: CHECKSHAPE : Faulty"
puts "TODO CR23096 ALL: NBSHAPES : Faulty"
puts "TODO CR23096 ALL: TOLERANCE : Faulty"
-
set filename trj7_pm5-ug-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 9 ( 184 ) Summary = 9 ( 184 )
-CHECKSHAPE : Wires = 2 ( 0 ) Faces = 2 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 236 ( 236 ) Summary = 1654 ( 1655 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 236 ( 236 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 653 ( 653 )
-TOLERANCE : MaxTol = 0.9036712736 ( 0.01854047103 ) AvgTol = 0.002851128061 ( 0.0005801792851 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 34 ( 34 ) N2Labels = 0 ( 0 ) TotalLabels = 35 ( 35 ) NameLabels = 1 ( 1 ) ColorLabels = 35 ( 35 ) LayerLabels = 1 ( 1 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 11 ( 11 )
-COLORS : Colors = DARKORCHID FIREBRICK3 GRAY40 GRAY77 LIGHTPINK3 LIGHTSEAGREEN OLIVEDRAB OLIVEDRAB4 ROYALBLUE SIENNA3 TAN4 ( DARKORCHID FIREBRICK3 GRAY40 GRAY77 LIGHTPINK3 LIGHTSEAGREEN OLIVEDRAB OLIVEDRAB4 ROYALBLUE SIENNA3 TAN4 )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 50 ( 50 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 184 -max_faults 0
+checkxstat D_First -n0 1 -n1 34 -n2 0 -total 35 -withname 1 -withcolor 35 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { DARKORCHID FIREBRICK3 GRAY40 GRAY77 LIGHTPINK3 LIGHTSEAGREEN OLIVEDRAB OLIVEDRAB4 ROYALBLUE SIENNA3 TAN4 } -nbcolors 11 -layers { 50 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 236 -shape 1655
+checkstatshape res_1 -solid 1 -shell 1 -face 236 -freewire 0 -freeedge 0 -sharededge 653
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.01854047103 -avg 0.0005801792851]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 184 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 6 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 34 -n2 0 -total 35 -withname 1 -withcolor 35 -withlayer 1 -centroid 0 -volume 0 -area 0 -nbcolors 11 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 34 -n2 0 -total 35 -withname 1 -withcolor 35 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { DARKORCHID FIREBRICK3 GRAY40 GRAY77 LIGHTPINK3 LIGHTSEAGREEN OLIVEDRAB OLIVEDRAB4 ROYALBLUE SIENNA3 TAN4 } -nbcolors 11 -layers { 50 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 2 -max_faces 2 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 236 -shape 1654 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 236 -freewire 0 -freeedge 0 -sharededge 653 -max_solid 1 -max_shell 1 -max_face 236 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.9036712736 -avg 0.002851128061 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
puts "TODO CR23096 ALL: LAYERS : Faulty"
set filename db_as1-A.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 5 ( 5 ) Shell = 5 ( 5 ) Face = 53 ( 53 ) Summary = 350 ( 350 )
-STATSHAPE : Solid = 12 ( 12 ) Shell = 12 ( 12 ) Face = 112 ( 112 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 126 ( 126 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1.000100003e-007 ) AvgTol = 1.000056424e-007 ( 1.000056424e-007 )
-LABELS : N0Labels = 6 ( 6 ) N1Labels = 12 ( 12 ) N2Labels = 0 ( 0 ) TotalLabels = 18 ( 18 ) NameLabels = 18 ( 18 ) ColorLabels = 5 ( 5 ) LayerLabels = 5 ( 17 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = WHITE ( WHITE )
-NLAYERS : NLayers = 1 ( 2 )
-LAYERS : Layers = 1 ( { 1} 255 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 6 -n1 12 -n2 0 -total 18 -withname 18 -withcolor 5 -withlayer 17 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { 50 } -nblayers 2
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 5 -shell 5 -face 53 -shape 350
+checkstatshape res_1 -solid 12 -shell 12 -face 112 -freewire 0 -freeedge 0 -sharededge 126
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-007 -avg 1.000056424e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 6 -n1 12 -n2 0 -total 18 -withname 18 -withcolor 5 -withlayer 17 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 2
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 6 -n1 12 -n2 0 -total 18 -withname 18 -withcolor 5 -withlayer 5 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { 50 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 5 -shell 5 -face 53 -shape 350 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 12 -shell 12 -face 112 -freewire 0 -freeedge 0 -sharededge 126 -max_solid 12 -max_shell 12 -max_face 112 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.000056424e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
puts "TODO CR23096 ALL: LAYERS : Faulty"
set filename db_as1-B.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 28 ( 28 ) Summary = 28 ( 28 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 5 ( 5 ) Shell = 5 ( 5 ) Face = 53 ( 53 ) Summary = 350 ( 350 )
-STATSHAPE : Solid = 12 ( 12 ) Shell = 12 ( 12 ) Face = 112 ( 112 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 126 ( 126 )
-TOLERANCE : MaxTol = 7.326842303e-006 ( 7.326840268e-006 ) AvgTol = 3.154767954e-006 ( 3.189428163e-006 )
-LABELS : N0Labels = 6 ( 6 ) N1Labels = 12 ( 12 ) N2Labels = 0 ( 0 ) TotalLabels = 18 ( 18 ) NameLabels = 18 ( 18 ) ColorLabels = 5 ( 5 ) LayerLabels = 5 ( 17 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = WHITE ( WHITE )
-NLAYERS : NLayers = 1 ( 2 )
-LAYERS : Layers = 1 ( { 1} 255 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 28 -max_faults 0
+checkxstat D_First -n0 6 -n1 12 -n2 0 -total 18 -withname 18 -withcolor 5 -withlayer 17 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { 50 } -nblayers 2
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 5 -shell 5 -face 53 -shape 350
+checkstatshape res_1 -solid 12 -shell 12 -face 112 -freewire 0 -freeedge 0 -sharededge 126
+set max_tol_res_1 [checkmaxtol res_1 -tol 7.326840268e-006 -avg 3.189428163e-006]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 28 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 28 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 6 -n1 12 -n2 0 -total 18 -withname 18 -withcolor 5 -withlayer 17 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 2
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 6 -n1 12 -n2 0 -total 18 -withname 18 -withcolor 5 -withlayer 5 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { 50 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 5 -shell 5 -face 53 -shape 350 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 12 -shell 12 -face 112 -freewire 0 -freeedge 0 -sharededge 126 -max_solid 12 -max_shell 12 -max_face 112 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 7.326842303e-006 -avg 3.154767954e-006 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
puts "TODO CR23096 ALL: LAYERS : Faulty"
-
set filename trj8_k1-pe-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 52 ( 52 ) Summary = 369 ( 361 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 52 ( 52 ) FreeWire = 0 ( 0 ) FreeEdge = 7 ( 7 ) SharedEdge = 145 ( 145 )
-TOLERANCE : MaxTol = 0.002782235243 ( 0.008046428382 ) AvgTol = 0.0002755630596 ( 0.0008383168463 )
-LABELS : N0Labels = 3 ( 3 ) N1Labels = 7 ( 9 ) N2Labels = 0 ( 0 ) TotalLabels = 10 ( 12 ) NameLabels = 5 ( 5 ) ColorLabels = 5 ( 5 ) LayerLabels = 5 ( 7 )
-PROPS : Centroid = 1 ( 1 ) Volume = 1 ( 1 ) Area = 1 ( 1 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = YELLOW ( YELLOW )
-NLAYERS : NLayers = 1 ( 2 )
-LAYERS : Layers = 02___PRT_ALL_AXES ( 02___PRT_ALL_AXES 04___PRT_ALL_DTM_PNT )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 3 -n1 9 -n2 0 -total 12 -withname 5 -withcolor 5 -withlayer 7 -centroid 1 -volume 1 -area 1 -colors { YELLOW } -nbcolors 1 -layers { 50 } -nblayers 2
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 52 -shape 361
+checkstatshape res_1 -solid 1 -shell 1 -face 52 -freewire 0 -freeedge 7 -sharededge 145
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.008046428382 -avg 0.0008383168463]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3 -n1 9 -n2 0 -total 12 -withname 5 -withcolor 5 -withlayer 7 -centroid 1 -volume 1 -area 1 -nbcolors 1 -nblayers 2
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 7 -n2 0 -total 10 -withname 5 -withcolor 5 -withlayer 5 -centroid 1 -volume 1 -area 1 -colors { YELLOW } -nbcolors 1 -layers { 50 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 52 -shape 369 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 52 -freewire 0 -freeedge 7 -sharededge 145 -max_solid 1 -max_shell 1 -max_face 52 -max_freewire 0 -max_freeedge 7
+checkmaxtol res_2 -tol 0.002782235243 -avg 0.0002755630596 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
puts "TODO CR23096 ALL: LAYERS : Faulty"
-
set filename trj3_s1-db-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 18 ) Warnings = 0 ( 0 ) Summary = 0 ( 18 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 36 ( 12 ) Summary = 36 ( 12 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 9 ( 9 ) Shell = 9 ( 9 ) Face = 152 ( 152 ) Summary = 998 ( 998 )
-STATSHAPE : Solid = 11 ( 11 ) Shell = 11 ( 11 ) Face = 178 ( 178 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 407 ( 407 )
-TOLERANCE : MaxTol = 0.0182458548 ( 0.0182458548 ) AvgTol = 0.0001972882903 ( 0.0001972348021 )
-LABELS : N0Labels = 9 ( 9 ) N1Labels = 12 ( 12 ) N2Labels = 0 ( 0 ) TotalLabels = 21 ( 21 ) NameLabels = 19 ( 19 ) ColorLabels = 9 ( 9 ) LayerLabels = 9 ( 19 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 5 ( 5 )
-COLORS : Colors = DODGERBLUE2 MAGENTA1 RED WHITE YELLOW ( DODGERBLUE2 MAGENTA1 RED WHITE YELLOW )
-NLAYERS : NLayers = 1 ( 2 )
-LAYERS : Layers = 0 ( { 0} 255 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 18
+checkdoc "tpstat c" -max_warns 12 -max_faults 0
+checkxstat D_First -n0 9 -n1 12 -n2 0 -total 21 -withname 19 -withcolor 9 -withlayer 19 -centroid 0 -volume 0 -area 0 -colors { DODGERBLUE2 MAGENTA1 RED WHITE YELLOW } -nbcolors 5 -layers { 50 } -nblayers 2
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 9 -shell 9 -face 152 -shape 998
+checkstatshape res_1 -solid 11 -shell 11 -face 178 -freewire 0 -freeedge 0 -sharededge 407
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.0182458548 -avg 0.0001972348021]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 18
+checkdoc "tpstat c" -max_warns 12 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 36 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 9 -n1 12 -n2 0 -total 21 -withname 19 -withcolor 9 -withlayer 19 -centroid 0 -volume 0 -area 0 -nbcolors 5 -nblayers 2
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 9 -n1 12 -n2 0 -total 21 -withname 19 -withcolor 9 -withlayer 9 -centroid 0 -volume 0 -area 0 -colors { DODGERBLUE2 MAGENTA1 RED WHITE YELLOW } -nbcolors 5 -layers { 50 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 9 -shell 9 -face 152 -shape 998 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 11 -shell 11 -face 178 -freewire 0 -freeedge 0 -sharededge 407 -max_solid 11 -max_shell 11 -max_face 178 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.0182458548 -avg 0.0001972882903 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
puts "TODO CR23096 ALL: LAYERS : Faulty"
set filename tr8_as2_db.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 28 ( 28 ) Summary = 28 ( 28 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 5 ( 5 ) Shell = 5 ( 5 ) Face = 53 ( 53 ) Summary = 353 ( 353 )
-STATSHAPE : Solid = 18 ( 18 ) Shell = 18 ( 18 ) Face = 160 ( 160 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 126 ( 126 )
-TOLERANCE : MaxTol = 7.326842297e-006 ( 7.326840249e-006 ) AvgTol = 2.619050232e-006 ( 2.65157743e-006 )
-LABELS : N0Labels = 9 ( 9 ) N1Labels = 13 ( 13 ) N2Labels = 0 ( 0 ) TotalLabels = 22 ( 22 ) NameLabels = 22 ( 19 ) ColorLabels = 5 ( 5 ) LayerLabels = 5 ( 12 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 5 ( 5 )
-COLORS : Colors = CYAN1 GOLD3 RED3 TURQUOISE4 YELLOW ( CYAN1 GOLD3 RED3 TURQUOISE4 YELLOW )
-NLAYERS : NLayers = 1 ( 2 )
-LAYERS : Layers = 0 ( { 0} 255 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 28 -max_faults 0
+checkxstat D_First -n0 9 -n1 13 -n2 0 -total 22 -withname 19 -withcolor 5 -withlayer 12 -centroid 0 -volume 0 -area 0 -colors { CYAN1 GOLD3 RED3 TURQUOISE4 YELLOW } -nbcolors 5 -layers { 50 } -nblayers 2
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 5 -shell 5 -face 53 -shape 353
+checkstatshape res_1 -solid 18 -shell 18 -face 160 -freewire 0 -freeedge 0 -sharededge 126
+set max_tol_res_1 [checkmaxtol res_1 -tol 7.326840249e-006 -avg 2.65157743e-006]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 28 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 28 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 9 -n1 13 -n2 0 -total 22 -withname 19 -withcolor 5 -withlayer 12 -centroid 0 -volume 0 -area 0 -nbcolors 5 -nblayers 2
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 9 -n1 13 -n2 0 -total 22 -withname 22 -withcolor 5 -withlayer 5 -centroid 0 -volume 0 -area 0 -colors { CYAN1 GOLD3 RED3 TURQUOISE4 YELLOW } -nbcolors 5 -layers { 50 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 5 -shell 5 -face 53 -shape 353 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 18 -shell 18 -face 160 -freewire 0 -freeedge 0 -sharededge 126 -max_solid 18 -max_shell 18 -max_face 160 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 7.326842297e-006 -avg 2.619050232e-006 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
puts "TODO CR23096 ALL: LAYERS : Faulty"
set filename tr8_as2a_db.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 5 ( 5 ) Shell = 5 ( 5 ) Face = 53 ( 53 ) Summary = 353 ( 353 )
-STATSHAPE : Solid = 18 ( 18 ) Shell = 18 ( 18 ) Face = 160 ( 160 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 126 ( 126 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1.000100003e-007 ) AvgTol = 1.000062348e-007 ( 1.000062348e-007 )
-LABELS : N0Labels = 9 ( 9 ) N1Labels = 13 ( 13 ) N2Labels = 0 ( 0 ) TotalLabels = 22 ( 22 ) NameLabels = 22 ( 19 ) ColorLabels = 5 ( 5 ) LayerLabels = 5 ( 12 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 5 ( 5 )
-COLORS : Colors = CYAN1 GOLD3 RED3 TURQUOISE4 YELLOW ( CYAN1 GOLD3 RED3 TURQUOISE4 YELLOW )
-NLAYERS : NLayers = 1 ( 2 )
-LAYERS : Layers = 0 ( { 0} 255 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 9 -n1 13 -n2 0 -total 22 -withname 19 -withcolor 5 -withlayer 12 -centroid 0 -volume 0 -area 0 -colors { CYAN1 GOLD3 RED3 TURQUOISE4 YELLOW } -nbcolors 5 -layers { 50 } -nblayers 2
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 5 -shell 5 -face 53 -shape 353
+checkstatshape res_1 -solid 18 -shell 18 -face 160 -freewire 0 -freeedge 0 -sharededge 126
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-007 -avg 1.000062348e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 9 -n1 13 -n2 0 -total 22 -withname 19 -withcolor 5 -withlayer 12 -centroid 0 -volume 0 -area 0 -nbcolors 5 -nblayers 2
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 9 -n1 13 -n2 0 -total 22 -withname 22 -withcolor 5 -withlayer 5 -centroid 0 -volume 0 -area 0 -colors { CYAN1 GOLD3 RED3 TURQUOISE4 YELLOW } -nbcolors 5 -layers { 50 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 5 -shell 5 -face 53 -shape 353 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 18 -shell 18 -face 160 -freewire 0 -freeedge 0 -sharededge 126 -max_solid 18 -max_shell 18 -max_face 160 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.000062348e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: STATSHAPE : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
puts "TODO CR23096 ALL: LAYERS : Faulty"
-
set filename trj4_k1_geo-tc-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 1 ( 8 ) Summary = 1 ( 8 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 59 ( 0 ) Face = 59 ( 59 ) Summary = 787 ( 787 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 59 ( 0 ) Face = 59 ( 59 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 304 ( 304 )
-TOLERANCE : MaxTol = 0.003826736784 ( 0.003826736784 ) AvgTol = 0.0001420196159 ( 0.000142020283 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 59 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 60 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 59 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 1 )
-LAYERS : Layers = ( 000 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 8 -max_faults 0
+checkxstat D_First -n0 1 -n1 59 -n2 0 -total 60 -withname 1 -withcolor 0 -withlayer 59 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { 000 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 59 -shape 787
+checkstatshape res_1 -solid 0 -shell 0 -face 59 -freewire 0 -freeedge 0 -sharededge 304
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.003826736784 -avg 0.000142020283]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 8 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 59 -n2 0 -total 60 -withname 1 -withcolor 0 -withlayer 59 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 59 -face 59 -shape 787 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 59 -face 59 -freewire 0 -freeedge 0 -sharededge 304 -max_solid 0 -max_shell 0 -max_face 59 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.003826736784 -avg 0.0001420196159 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: STATSHAPE : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
puts "TODO CR23096 ALL: LAYERS : Faulty"
-
set filename trj4_k1_geo-tu-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 1 ( 10 ) Summary = 1 ( 10 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 44 ( 0 ) Face = 44 ( 44 ) Summary = 559 ( 559 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 44 ( 0 ) Face = 44 ( 44 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 217 ( 217 )
-TOLERANCE : MaxTol = 0.0004382667275 ( 0.007688098235 ) AvgTol = 1.733348843e-005 ( 0.0002416764063 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 44 ( 44 ) N2Labels = 0 ( 0 ) TotalLabels = 45 ( 45 ) NameLabels = 1 ( 1 ) ColorLabels = 44 ( 44 ) LayerLabels = 0 ( 44 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = GREEN ( GREEN )
-NLAYERS : NLayers = 0 ( 1 )
-LAYERS : Layers = ( 001 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 10 -max_faults 0
+checkxstat D_First -n0 1 -n1 44 -n2 0 -total 45 -withname 1 -withcolor 44 -withlayer 44 -centroid 0 -volume 0 -area 0 -colors { GREEN } -nbcolors 1 -layers { 001 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 44 -shape 559
+checkstatshape res_1 -solid 0 -shell 0 -face 44 -freewire 0 -freeedge 0 -sharededge 217
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.007688098235 -avg 0.0002416764063]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 10 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 44 -n2 0 -total 45 -withname 1 -withcolor 44 -withlayer 44 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 44 -n2 0 -total 45 -withname 1 -withcolor 44 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { GREEN } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 44 -face 44 -shape 559 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 44 -face 44 -freewire 0 -freeedge 0 -sharededge 217 -max_solid 0 -max_shell 0 -max_face 44 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.0004382667275 -avg 1.733348843e-005 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename 123.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 8 ( 9 ) Summary = 8 ( 9 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 42 ( 42 ) Summary = 264 ( 264 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 42 ( 42 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 111 ( 111 )
-TOLERANCE : MaxTol = 0.000360862095 ( 0.000360862095 ) AvgTol = 4.792885522e-005 ( 4.792885525e-005 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 9 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 42 -shape 264
+checkstatshape res_1 -solid 1 -shell 1 -face 42 -freewire 0 -freeedge 0 -sharededge 111
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.000360862095 -avg 4.792885525e-005]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 9 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 8 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 42 -shape 264 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 42 -freewire 0 -freeedge 0 -sharededge 111 -max_solid 1 -max_shell 1 -max_face 42 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.000360862095 -avg 4.792885522e-005 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename CTS21188.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 48 ( 48 ) Summary = 320 ( 320 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 48 ( 48 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 134 ( 134 )
-TOLERANCE : MaxTol = 0.001845874753 ( 0.001976820841 ) AvgTol = 0.0001959017883 ( 0.0002002051809 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 48 -shape 320
+checkstatshape res_1 -solid 1 -shell 1 -face 48 -freewire 0 -freeedge 0 -sharededge 134
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.001976820841 -avg 0.0002002051809]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 48 -shape 320 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 48 -freewire 0 -freeedge 0 -sharededge 134 -max_solid 1 -max_shell 1 -max_face 48 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.001845874753 -avg 0.0001959017883 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename Inventor_FrameHinge.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 8 ( 8 ) Summary = 8 ( 8 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 6 ( 6 ) Shell = 6 ( 6 ) Face = 226 ( 226 ) Summary = 1397 ( 1397 )
-STATSHAPE : Solid = 12 ( 12 ) Shell = 12 ( 12 ) Face = 452 ( 452 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 544 ( 544 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1.000100003e-007 ) AvgTol = 1.000054901e-007 ( 1.000054901e-007 )
-LABELS : N0Labels = 9 ( 9 ) N1Labels = 10 ( 10 ) N2Labels = 0 ( 0 ) TotalLabels = 19 ( 19 ) NameLabels = 19 ( 19 ) ColorLabels = 6 ( 6 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = GOLDENROD3 GRAY66 ( GOLDENROD3 GRAY66 )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 8 -max_faults 0
+checkxstat D_First -n0 9 -n1 10 -n2 0 -total 19 -withname 19 -withcolor 6 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { GOLDENROD3 GRAY66 } -nbcolors 2 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 6 -shell 6 -face 226 -shape 1397
+checkstatshape res_1 -solid 12 -shell 12 -face 452 -freewire 0 -freeedge 0 -sharededge 544
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-007 -avg 1.000054901e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 8 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 8 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 9 -n1 10 -n2 0 -total 19 -withname 19 -withcolor 6 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 2 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 9 -n1 10 -n2 0 -total 19 -withname 19 -withcolor 6 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { GOLDENROD3 GRAY66 } -nbcolors 2 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 6 -shell 6 -face 226 -shape 1397 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 12 -shell 12 -face 452 -freewire 0 -freeedge 0 -sharededge 544 -max_solid 12 -max_shell 12 -max_face 452 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.000054901e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
-
set filename Inventor_SupportBracket.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 18 ( 16 ) Summary = 18 ( 16 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 160 ( 160 ) Summary = 1022 ( 1022 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 160 ( 160 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 420 ( 420 )
-TOLERANCE : MaxTol = 0.000243175147 ( 0.0002431751501 ) AvgTol = 8.050705279e-006 ( 8.05104887e-006 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 16 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 160 -shape 1022
+checkstatshape res_1 -solid 1 -shell 1 -face 160 -freewire 0 -freeedge 0 -sharededge 420
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.0002431751501 -avg 8.05104887e-006]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 16 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 18 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 160 -shape 1022 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 160 -freewire 0 -freeedge 0 -sharededge 420 -max_solid 1 -max_shell 1 -max_face 160 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.000243175147 -avg 8.050705279e-006 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename Inventor_scissor.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 2 ( 2 ) Summary = 2 ( 2 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 3 ( 3 ) Shell = 3 ( 3 ) Face = 127 ( 127 ) Summary = 838 ( 838 )
-STATSHAPE : Solid = 3 ( 3 ) Shell = 3 ( 3 ) Face = 127 ( 127 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 346 ( 346 )
-TOLERANCE : MaxTol = 0.0005363486823 ( 0.0005363486821 ) AvgTol = 1.61499994e-005 ( 1.636295799e-005 )
-LABELS : N0Labels = 4 ( 4 ) N1Labels = 3 ( 3 ) N2Labels = 0 ( 0 ) TotalLabels = 7 ( 7 ) NameLabels = 7 ( 7 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+checkxstat D_First -n0 4 -n1 3 -n2 0 -total 7 -withname 7 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 3 -shell 3 -face 127 -shape 838
+checkstatshape res_1 -solid 3 -shell 3 -face 127 -freewire 0 -freeedge 0 -sharededge 346
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.0005363486821 -avg 1.636295799e-005]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 4 -n1 3 -n2 0 -total 7 -withname 7 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 4 -n1 3 -n2 0 -total 7 -withname 7 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 3 -shell 3 -face 127 -shape 838 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 3 -shell 3 -face 127 -freewire 0 -freeedge 0 -sharededge 346 -max_solid 3 -max_shell 3 -max_face 127 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.0005363486823 -avg 1.61499994e-005 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename PRO10361.stp
-set ref_data {
-DATA : Faulties = 0 ( 8 ) Warnings = 0 ( 0 ) Summary = 0 ( 8 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 1 ) Summary = 0 ( 1 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 56 ( 56 ) Summary = 370 ( 370 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 56 ( 56 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 151 ( 151 )
-TOLERANCE : MaxTol = 1e-07 ( 1e-07 ) AvgTol = 1e-07 ( 1e-07 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 8
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 56 -shape 370
+checkstatshape res_1 -solid 1 -shell 1 -face 56 -freewire 0 -freeedge 0 -sharededge 151
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-07 -avg 1e-07]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 8
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 56 -shape 370 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 56 -freewire 0 -freeedge 0 -sharededge 151 -max_solid 1 -max_shell 1 -max_face 56 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1e-07 -avg 1e-07 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename PRO10362.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 22 ) Summary = 0 ( 22 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 5 ( 5 ) Shell = 5 ( 5 ) Face = 53 ( 53 ) Summary = 363 ( 363 )
-STATSHAPE : Solid = 18 ( 18 ) Shell = 18 ( 18 ) Face = 160 ( 160 ) FreeWire = 0 ( 0 ) FreeEdge = 1 ( 1 ) SharedEdge = 127 ( 127 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1.000100003e-007 ) AvgTol = 1.000062184e-007 ( 1.000062184e-007 )
-LABELS : N0Labels = 14 ( 14 ) N1Labels = 21 ( 21 ) N2Labels = 0 ( 0 ) TotalLabels = 35 ( 35 ) NameLabels = 35 ( 35 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 10 -max_faults 0
+checkdoc "tpstat c" -max_warns 22 -max_faults 0
+checkxstat D_First -n0 14 -n1 21 -n2 0 -total 35 -withname 35 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 5 -shell 5 -face 53 -shape 363
+checkstatshape res_1 -solid 18 -shell 18 -face 160 -freewire 0 -freeedge 1 -sharededge 127
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-007 -avg 1.000062184e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 10 -max_faults 0
+checkdoc "tpstat c" -max_warns 22 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 14 -n1 21 -n2 0 -total 35 -withname 35 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 14 -n1 21 -n2 0 -total 35 -withname 35 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 5 -shell 5 -face 53 -shape 363 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 18 -shell 18 -face 160 -freewire 0 -freeedge 1 -sharededge 127 -max_solid 18 -max_shell 18 -max_face 160 -max_freewire 0 -max_freeedge 1
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.000062184e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
-
set filename PRO17015.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 3 ( 0 ) Summary = 3 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 73 ( 73 ) Summary = 433 ( 433 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 73 ( 73 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 168 ( 168 )
-TOLERANCE : MaxTol = 0.002049242464 ( 0.002049242464 ) AvgTol = 0.0001598416736 ( 0.0001598416997 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 73 -shape 433
+checkstatshape res_1 -solid 1 -shell 1 -face 73 -freewire 0 -freeedge 0 -sharededge 168
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.002049242464 -avg 0.0001598416997]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 3 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 73 -shape 433 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 73 -freewire 0 -freeedge 0 -sharededge 168 -max_solid 1 -max_shell 1 -max_face 73 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.002049242464 -avg 0.0001598416736 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename PRO5974.stp
-set ref_data {
-DATA : Faulties = 0 ( 1 ) Warnings = 0 ( 0 ) Summary = 0 ( 1 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 1 ) Summary = 0 ( 1 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 12 ( 12 ) Summary = 108 ( 108 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 12 ( 12 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 47 ( 47 )
-TOLERANCE : MaxTol = 0.0004295981946 ( 0.0007438758061 ) AvgTol = 0.0001505191048 ( 0.0002225194653 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 1
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 1 -face 12 -shape 108
+checkstatshape res_1 -solid 0 -shell 1 -face 12 -freewire 0 -freeedge 0 -sharededge 47
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.0007438758061 -avg 0.0002225194653]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 1
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 1 -face 12 -shape 108 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 1 -face 12 -freewire 0 -freeedge 0 -sharededge 47 -max_solid 0 -max_shell 1 -max_face 12 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.0004295981946 -avg 0.0001505191048 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename PRO7745.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 18 ( 18 ) Summary = 18 ( 18 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 60 ( 60 ) Summary = 370 ( 370 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 60 ( 60 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 158 ( 158 )
-TOLERANCE : MaxTol = 8.855087235 ( 8.855087235 ) AvgTol = 0.2597592097 ( 0.2598183653 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 18 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 1 -face 60 -shape 370
+checkstatshape res_1 -solid 0 -shell 1 -face 60 -freewire 0 -freeedge 0 -sharededge 158
+set max_tol_res_1 [checkmaxtol res_1 -tol 8.855087235 -avg 0.2598183653]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 18 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 18 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 1 -face 60 -shape 370 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 1 -face 60 -freewire 0 -freeedge 0 -sharededge 158 -max_solid 0 -max_shell 1 -max_face 60 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 8.855087235 -avg 0.2597592097 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename PRO9237.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 2 ) Summary = 0 ( 2 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 9 ( 9 ) Summary = 73 ( 73 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 9 ( 9 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 31 ( 31 )
-TOLERANCE : MaxTol = 0.004821884032 ( 0.2046977269 ) AvgTol = 0.0006277936905 ( 0.01292923854 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 1 -face 9 -shape 73
+checkstatshape res_1 -solid 0 -shell 1 -face 9 -freewire 0 -freeedge 0 -sharededge 31
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.2046977269 -avg 0.01292923854]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 1 -face 9 -shape 73 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 1 -face 9 -freewire 0 -freeedge 0 -sharededge 31 -max_solid 0 -max_shell 1 -max_face 9 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.004821884032 -avg 0.0006277936905 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename PRO9239.stp
-set ref_data {
-DATA : Faulties = 0 ( 8 ) Warnings = 0 ( 0 ) Summary = 0 ( 8 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 8 ( 13 ) Summary = 8 ( 13 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 3 ( 3 ) Face = 22 ( 22 ) Summary = 149 ( 149 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 3 ( 3 ) Face = 22 ( 22 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 61 ( 61 )
-TOLERANCE : MaxTol = 9.264087353e-06 ( 9.591855965e-06 ) AvgTol = 1.179688295e-06 ( 1.221596404e-06 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 8
+checkdoc "tpstat c" -max_warns 13 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 3 -face 22 -shape 149
+checkstatshape res_1 -solid 0 -shell 3 -face 22 -freewire 0 -freeedge 0 -sharededge 61
+set max_tol_res_1 [checkmaxtol res_1 -tol 9.591855965e-06 -avg 1.221596404e-06]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 8
+checkdoc "tpstat c" -max_warns 13 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 8 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 3 -face 22 -shape 149 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 3 -face 22 -freewire 0 -freeedge 0 -sharededge 61 -max_solid 0 -max_shell 3 -max_face 22 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 9.264087353e-06 -avg 1.179688295e-06 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: NBSHAPES : Faulty"
-
set filename PRO9240.stp
-set ref_data {
-DATA : Faulties = 0 ( 30 ) Warnings = 0 ( 0 ) Summary = 0 ( 30 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 14 ( 51 ) Summary = 14 ( 51 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 7 ( 7 ) Shell = 7 ( 7 ) Face = 35 ( 35 ) Summary = 200 ( 204 )
-STATSHAPE : Solid = 7 ( 7 ) Shell = 7 ( 7 ) Face = 35 ( 35 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 73 ( 77 )
-TOLERANCE : MaxTol = 1.923934361e-06 ( 1.923934702e-06 ) AvgTol = 8.837706424e-07 ( 8.927244379e-07 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 30
+checkdoc "tpstat c" -max_warns 51 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 7 -shell 7 -face 35 -shape 204
+checkstatshape res_1 -solid 7 -shell 7 -face 35 -freewire 0 -freeedge 0 -sharededge 77
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.923934702e-06 -avg 8.927244379e-07]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 30
+checkdoc "tpstat c" -max_warns 51 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 14 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 7 -shell 7 -face 35 -shape 200 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 7 -shell 7 -face 35 -freewire 0 -freeedge 0 -sharededge 73 -max_solid 7 -max_shell 7 -max_face 35 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.923934361e-06 -avg 8.837706424e-07 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
-
set filename PRO9244.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 14 ( 4 ) Summary = 14 ( 4 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 41 ( 41 ) Summary = 366 ( 345 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 41 ( 41 ) FreeWire = 0 ( 4 ) FreeEdge = 24 ( 24 ) SharedEdge = 147 ( 146 )
-TOLERANCE : MaxTol = 0.07980045861 ( 0.07980045861 ) AvgTol = 0.006103158242 ( 0.006647466389 )
-LABELS : N0Labels = 3 ( 3 ) N1Labels = 2 ( 2 ) N2Labels = 0 ( 0 ) TotalLabels = 5 ( 5 ) NameLabels = 5 ( 5 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 3 -max_faults 0
+checkxstat D_First -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 41 -shape 345
+checkstatshape res_1 -solid 1 -shell 1 -face 41 -freewire 4 -freeedge 24 -sharededge 146
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.07980045861 -avg 0.006647466389]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 3 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 14 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 41 -shape 366 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 41 -freewire 0 -freeedge 24 -sharededge 147 -max_solid 1 -max_shell 1 -max_face 41 -max_freewire 4 -max_freeedge 24
+checkmaxtol res_2 -tol 0.07980045861 -avg 0.006103158242 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename RU.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 14 ( 16 ) Summary = 14 ( 16 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 17 ( 17 ) Shell = 17 ( 17 ) Face = 98 ( 98 ) Summary = 642 ( 627 )
-STATSHAPE : Solid = 17 ( 17 ) Shell = 17 ( 17 ) Face = 98 ( 98 ) FreeWire = 0 ( 0 ) FreeEdge = 15 ( 15 ) SharedEdge = 207 ( 207 )
-TOLERANCE : MaxTol = 1.00005e-007 ( 1.00005e-007 ) AvgTol = 1.000039537e-007 ( 1.000039537e-007 )
-LABELS : N0Labels = 19 ( 19 ) N1Labels = 18 ( 18 ) N2Labels = 0 ( 0 ) TotalLabels = 37 ( 37 ) NameLabels = 37 ( 37 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 16 -max_faults 0
+checkxstat D_First -n0 19 -n1 18 -n2 0 -total 37 -withname 37 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 17 -shell 17 -face 98 -shape 627
+checkstatshape res_1 -solid 17 -shell 17 -face 98 -freewire 0 -freeedge 15 -sharededge 207
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.00005e-007 -avg 1.000039537e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 16 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 14 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 19 -n1 18 -n2 0 -total 37 -withname 37 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 19 -n1 18 -n2 0 -total 37 -withname 37 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 17 -shell 17 -face 98 -shape 642 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 17 -shell 17 -face 98 -freewire 0 -freeedge 15 -sharededge 207 -max_solid 17 -max_shell 17 -max_face 98 -max_freewire 0 -max_freeedge 15
+checkmaxtol res_2 -tol 1.00005e-007 -avg 1.000039537e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename fourche7.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 2 ( 2 ) Face = 103 ( 103 ) Summary = 748 ( 720 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 2 ( 2 ) Face = 103 ( 103 ) FreeWire = 0 ( 0 ) FreeEdge = 28 ( 28 ) SharedEdge = 275 ( 275 )
-TOLERANCE : MaxTol = 0.07080255958 ( 0.07080255958 ) AvgTol = 0.001643516697 ( 0.002252531923 )
-LABELS : N0Labels = 4 ( 4 ) N1Labels = 3 ( 3 ) N2Labels = 0 ( 0 ) TotalLabels = 7 ( 7 ) NameLabels = 7 ( 7 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 4 -n1 3 -n2 0 -total 7 -withname 7 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 2 -face 103 -shape 720
+checkstatshape res_1 -solid 1 -shell 2 -face 103 -freewire 0 -freeedge 28 -sharededge 275
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.07080255958 -avg 0.002252531923]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 4 -n1 3 -n2 0 -total 7 -withname 7 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 4 -n1 3 -n2 0 -total 7 -withname 7 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 2 -face 103 -shape 748 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 2 -face 103 -freewire 0 -freeedge 28 -sharededge 275 -max_solid 1 -max_shell 2 -max_face 103 -max_freewire 0 -max_freeedge 28
+checkmaxtol res_2 -tol 0.07080255958 -avg 0.001643516697 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
-
set filename robinet.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 4 ( 3 ) Summary = 4 ( 3 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 32 ( 32 ) Face = 32 ( 32 ) Summary = 451 ( 451 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 32 ( 32 ) Face = 32 ( 32 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 177 ( 177 )
-TOLERANCE : MaxTol = 0.0002711637276 ( 0.0002711637276 ) AvgTol = 3.750583844e-006 ( 4.44829676e-006 )
-LABELS : N0Labels = 33 ( 33 ) N1Labels = 32 ( 32 ) N2Labels = 0 ( 0 ) TotalLabels = 65 ( 65 ) NameLabels = 65 ( 65 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 3 -max_faults 0
+checkxstat D_First -n0 33 -n1 32 -n2 0 -total 65 -withname 65 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 32 -face 32 -shape 451
+checkstatshape res_1 -solid 0 -shell 32 -face 32 -freewire 0 -freeedge 0 -sharededge 177
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.0002711637276 -avg 4.44829676e-006]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 3 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 33 -n1 32 -n2 0 -total 65 -withname 65 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 33 -n1 32 -n2 0 -total 65 -withname 65 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 32 -face 32 -shape 451 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 32 -face 32 -freewire 0 -freeedge 0 -sharededge 177 -max_solid 0 -max_shell 32 -max_face 32 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.0002711637276 -avg 3.750583844e-006 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename abs1.stp
-set ref_data {
-DATA : Faulties = 0 ( 11 ) Warnings = 0 ( 0 ) Summary = 0 ( 11 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 2 ( 2 ) Summary = 2 ( 2 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 60 ( 60 ) Summary = 367 ( 367 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 60 ( 60 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 142 ( 142 )
-TOLERANCE : MaxTol = 1.000100003e-07 ( 1.000100003e-07 ) AvgTol = 1.000056326e-07 ( 1.000056326e-07 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 11
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 60 -shape 367
+checkstatshape res_1 -solid 1 -shell 1 -face 60 -freewire 0 -freeedge 0 -sharededge 142
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-07 -avg 1.000056326e-07]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 11
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 60 -shape 367 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 60 -freewire 0 -freeedge 0 -sharededge 142 -max_solid 1 -max_shell 1 -max_face 60 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-07 -avg 1.000056326e-07 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename absmix.stp
-set ref_data {
-DATA : Faulties = 0 ( 17 ) Warnings = 0 ( 0 ) Summary = 0 ( 17 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 2 ( 2 ) Summary = 2 ( 2 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 2 ( 2 ) Face = 70 ( 70 ) Summary = 415 ( 415 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 2 ( 2 ) Face = 70 ( 70 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 157 ( 157 )
-TOLERANCE : MaxTol = 1.000100003e-07 ( 1.000100003e-07 ) AvgTol = 1.000053123e-07 ( 1.000053123e-07 )
-LABELS : N0Labels = 2 ( 2 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 2 ( 2 ) NameLabels = 2 ( 2 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 17
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+checkxstat D_First -n0 2 -n1 0 -n2 0 -total 2 -withname 2 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 2 -face 70 -shape 415
+checkstatshape res_1 -solid 1 -shell 2 -face 70 -freewire 0 -freeedge 0 -sharededge 157
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-07 -avg 1.000053123e-07]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 17
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 2 -n1 0 -n2 0 -total 2 -withname 2 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 2 -n1 0 -n2 0 -total 2 -withname 2 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 2 -face 70 -shape 415 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 2 -face 70 -freewire 0 -freeedge 0 -sharededge 157 -max_solid 1 -max_shell 2 -max_face 70 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-07 -avg 1.000053123e-07 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename as1ie.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 18 ( 18 ) Shell = 18 ( 18 ) Face = 131 ( 131 ) Summary = 778 ( 778 )
-STATSHAPE : Solid = 18 ( 18 ) Shell = 18 ( 18 ) Face = 131 ( 131 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 259 ( 259 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1.000100003e-007 ) AvgTol = 1.000071455e-007 ( 1.000071455e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 18 -shell 18 -face 131 -shape 778
+checkstatshape res_1 -solid 18 -shell 18 -face 131 -freewire 0 -freeedge 0 -sharededge 259
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-007 -avg 1.000071455e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 18 -shell 18 -face 131 -shape 778 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 18 -shell 18 -face 131 -freewire 0 -freeedge 0 -sharededge 259 -max_solid 18 -max_shell 18 -max_face 131 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.000071455e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename as1sd.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 5 ( 5 ) Shell = 5 ( 5 ) Face = 53 ( 53 ) Summary = 365 ( 365 )
-STATSHAPE : Solid = 18 ( 18 ) Shell = 18 ( 18 ) Face = 160 ( 160 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 132 ( 132 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1.000100003e-007 ) AvgTol = 1.000062094e-007 ( 1.000062094e-007 )
-LABELS : N0Labels = 9 ( 9 ) N1Labels = 13 ( 13 ) N2Labels = 0 ( 0 ) TotalLabels = 22 ( 22 ) NameLabels = 22 ( 22 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 9 -n1 13 -n2 0 -total 22 -withname 22 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 5 -shell 5 -face 53 -shape 365
+checkstatshape res_1 -solid 18 -shell 18 -face 160 -freewire 0 -freeedge 0 -sharededge 132
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-007 -avg 1.000062094e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 9 -n1 13 -n2 0 -total 22 -withname 22 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 9 -n1 13 -n2 0 -total 22 -withname 22 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 5 -shell 5 -face 53 -shape 365 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 18 -shell 18 -face 160 -freewire 0 -freeedge 0 -sharededge 132 -max_solid 18 -max_shell 18 -max_face 160 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.000062094e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename bm1_db_lever.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 13 ( 13 ) Summary = 13 ( 13 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 70 ( 70 ) Summary = 444 ( 444 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 70 ( 70 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 182 ( 182 )
-TOLERANCE : MaxTol = 0.0001505408951 ( 0.0001811030214 ) AvgTol = 7.138967731e-006 ( 1.149095913e-005 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 2 -max_faults 0
+checkdoc "tpstat c" -max_warns 13 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 70 -shape 444
+checkstatshape res_1 -solid 1 -shell 1 -face 70 -freewire 0 -freeedge 0 -sharededge 182
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.0001811030214 -avg 1.149095913e-005]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 2 -max_faults 0
+checkdoc "tpstat c" -max_warns 13 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 13 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 70 -shape 444 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 70 -freewire 0 -freeedge 0 -sharededge 182 -max_solid 1 -max_shell 1 -max_face 70 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.0001505408951 -avg 7.138967731e-006 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename bm1_ie_t4.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 1 ) Summary = 0 ( 1 )
-CHECKSHAPE : Wires = 1 ( 1 ) Faces = 1 ( 1 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 15 ( 15 ) Face = 16 ( 16 ) Summary = 173 ( 173 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 15 ( 15 ) Face = 16 ( 16 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 62 ( 62 )
-TOLERANCE : MaxTol = 0.005727453836 ( 0.005727453946 ) AvgTol = 0.001247002689 ( 0.001247002697 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 1 -max_faces 1 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 15 -face 16 -shape 173
+checkstatshape res_1 -solid 0 -shell 15 -face 16 -freewire 0 -freeedge 0 -sharededge 62
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.005727453946 -avg 0.001247002697]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 1 -max_faces 1 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 1 -max_faces 1 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 15 -face 16 -shape 173 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 15 -face 16 -freewire 0 -freeedge 0 -sharededge 62 -max_solid 0 -max_shell 15 -max_face 16 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.005727453836 -avg 0.001247002689 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
-puts "TODO CR25013 ALL: Error : 3 differences with reference data found"
puts "TODO CR25013 ALL: NBSHAPES : Faulty"
+puts "TODO CR25013 ALL: Error : is WRONG because number of SHAPE entities in shape"
+puts "TODO CR25013 ALL: STATSHAPE : Faulty ref number of shared edges in command statshape"
+puts "TODO CR25013 ALL: Error: Avg tolerance of res_"
-set LinuxDiff 2
-set LinuxFaulties {STATSHAPE}
set filename bm1_pe_t4.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 2 ) Warnings = 19 ( 27 ) Summary = 19 ( 29 )
-CHECKSHAPE : Wires = 2 ( 3 ) Faces = 3 ( 3 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 12 ( 12 ) Face = 15 ( 15 ) Summary = 149 ( 149 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 12 ( 12 ) Face = 15 ( 15 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 57 ( 58 )
-TOLERANCE : MaxTol = 1562.051497 ( 1562.051497 ) AvgTol = 192.5735494 ( 206.7634854 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 26 -max_faults 2
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 3 -max_faces 3 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 12 -face 15 -shape 149
+checkstatshape res_1 -solid 0 -shell 12 -face 15 -freewire 0 -freeedge 0 -sharededge 58
+set max_tol_res_1 [checkmaxtol res_1 -tol 1562.051497 -avg 206.7634854]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 26 -max_faults 2
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 15 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 3 -max_faces 3 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 2 -max_faces 3 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 12 -face 15 -shape 149 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 12 -face 15 -freewire 0 -freeedge 0 -sharededge 57 -max_solid 0 -max_shell 12 -max_face 15 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1562.051497 -avg 192.5735494 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename bm1_sy_fuel.stp
-set ref_data {
-DATA : Faulties = 0 ( 3 ) Warnings = 0 ( 2 ) Summary = 0 ( 5 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 4 ( 6 ) Summary = 4 ( 6 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 6 ( 6 ) Face = 6 ( 6 ) Summary = 84 ( 79 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 6 ( 6 ) Face = 6 ( 6 ) FreeWire = 0 ( 0 ) FreeEdge = 5 ( 5 ) SharedEdge = 30 ( 30 )
-TOLERANCE : MaxTol = 0.01960210989 ( 0.01960210989 ) AvgTol = 0.001506671037 ( 0.001506671037 )
-LABELS : N0Labels = 3 ( 3 ) N1Labels = 19 ( 19 ) N2Labels = 0 ( 0 ) TotalLabels = 22 ( 22 ) NameLabels = 5 ( 5 ) ColorLabels = 11 ( 11 ) LayerLabels = 11 ( 11 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 3 ( 3 )
-COLORS : Colors = CHOCOLATE1 LIGHTSEAGREEN TURQUOISE ( CHOCOLATE1 LIGHTSEAGREEN TURQUOISE )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = {} ( {} )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 2 -max_faults 3
+checkdoc "tpstat c" -max_warns 6 -max_faults 0
+checkxstat D_First -n0 3 -n1 19 -n2 0 -total 22 -withname 5 -withcolor 11 -withlayer 11 -centroid 0 -volume 0 -area 0 -colors { CHOCOLATE1 LIGHTSEAGREEN TURQUOISE } -nbcolors 3 -layers { "" } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 6 -face 6 -shape 79
+checkstatshape res_1 -solid 0 -shell 6 -face 6 -freewire 0 -freeedge 5 -sharededge 30
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.01960210989 -avg 0.001506671037]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 2 -max_faults 3
+checkdoc "tpstat c" -max_warns 6 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3 -n1 19 -n2 0 -total 22 -withname 5 -withcolor 11 -withlayer 11 -centroid 0 -volume 0 -area 0 -nbcolors 3 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 19 -n2 0 -total 22 -withname 5 -withcolor 11 -withlayer 11 -centroid 0 -volume 0 -area 0 -colors { CHOCOLATE1 LIGHTSEAGREEN TURQUOISE } -nbcolors 3 -layers { "" } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 6 -face 6 -shape 84 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 6 -face 6 -freewire 0 -freeedge 5 -sharededge 30 -max_solid 0 -max_shell 6 -max_face 6 -max_freewire 0 -max_freeedge 5
+checkmaxtol res_2 -tol 0.01960210989 -avg 0.001506671037 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
puts "TODO CR23096 ALL: NBSHAPES : Faulty"
-
set filename bm1_sy_lever.stp
-set ref_data {
-DATA : Faulties = 0 ( 3 ) Warnings = 0 ( 2 ) Summary = 0 ( 5 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 11 ( 9 ) Summary = 11 ( 9 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 2 ( 2 ) Shell = 2 ( 2 ) Face = 99 ( 99 ) Summary = 654 ( 656 )
-STATSHAPE : Solid = 2 ( 2 ) Shell = 2 ( 2 ) Face = 99 ( 99 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 265 ( 266 )
-TOLERANCE : MaxTol = 3.000180002 ( 3.000180002 ) AvgTol = 0.1203601833 ( 0.1203606739 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 2 ( 2 ) N2Labels = 0 ( 0 ) TotalLabels = 3 ( 3 ) NameLabels = 1 ( 1 ) ColorLabels = 2 ( 2 ) LayerLabels = 2 ( 2 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = RED ( RED )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = {} ( {} )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 2 -max_faults 3
+checkdoc "tpstat c" -max_warns 9 -max_faults 0
+checkxstat D_First -n0 1 -n1 2 -n2 0 -total 3 -withname 1 -withcolor 2 -withlayer 2 -centroid 0 -volume 0 -area 0 -colors { RED } -nbcolors 1 -layers { "" } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 2 -shell 2 -face 99 -shape 656
+checkstatshape res_1 -solid 2 -shell 2 -face 99 -freewire 0 -freeedge 0 -sharededge 266
+set max_tol_res_1 [checkmaxtol res_1 -tol 3.000180002 -avg 0.1203606739]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 2 -max_faults 3
+checkdoc "tpstat c" -max_warns 9 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 13 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 2 -n2 0 -total 3 -withname 1 -withcolor 2 -withlayer 2 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 2 -n2 0 -total 3 -withname 1 -withcolor 2 -withlayer 2 -centroid 0 -volume 0 -area 0 -colors { RED } -nbcolors 1 -layers { "" } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 2 -shell 2 -face 99 -shape 654 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 2 -shell 2 -face 99 -freewire 0 -freeedge 0 -sharededge 265 -max_solid 2 -max_shell 2 -max_face 99 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 3.000180002 -avg 0.1203601833 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename bm1_sy_t4.stp
-set ref_data {
-DATA : Faulties = 0 ( 3 ) Warnings = 0 ( 2 ) Summary = 0 ( 5 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 1 ( 1 ) Summary = 1 ( 1 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 6 ( 6 ) Face = 6 ( 6 ) Summary = 102 ( 96 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 6 ( 6 ) Face = 6 ( 6 ) FreeWire = 0 ( 0 ) FreeEdge = 6 ( 6 ) SharedEdge = 35 ( 35 )
-TOLERANCE : MaxTol = 0.01889086606 ( 0.01889086606 ) AvgTol = 0.001105643981 ( 0.001105643981 )
-LABELS : N0Labels = 3 ( 3 ) N1Labels = 20 ( 20 ) N2Labels = 0 ( 0 ) TotalLabels = 23 ( 23 ) NameLabels = 5 ( 5 ) ColorLabels = 12 ( 12 ) LayerLabels = 12 ( 12 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = CHOCOLATE1 TURQUOISE ( CHOCOLATE1 TURQUOISE )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = {} ( {} )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 2 -max_faults 3
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+checkxstat D_First -n0 3 -n1 20 -n2 0 -total 23 -withname 5 -withcolor 12 -withlayer 12 -centroid 0 -volume 0 -area 0 -colors { CHOCOLATE1 TURQUOISE } -nbcolors 2 -layers { "" } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 6 -face 6 -shape 96
+checkstatshape res_1 -solid 0 -shell 6 -face 6 -freewire 0 -freeedge 6 -sharededge 35
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.01889086606 -avg 0.001105643981]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 2 -max_faults 3
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3 -n1 20 -n2 0 -total 23 -withname 5 -withcolor 12 -withlayer 12 -centroid 0 -volume 0 -area 0 -nbcolors 2 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 20 -n2 0 -total 23 -withname 5 -withcolor 12 -withlayer 12 -centroid 0 -volume 0 -area 0 -colors { CHOCOLATE1 TURQUOISE } -nbcolors 2 -layers { "" } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 6 -face 6 -shape 102 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 6 -face 6 -freewire 0 -freeedge 6 -sharededge 35 -max_solid 0 -max_shell 6 -max_face 6 -max_freewire 0 -max_freeedge 6
+checkmaxtol res_2 -tol 0.01889086606 -avg 0.001105643981 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename bm2_ca_lever-A.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 2 ( 19 ) Summary = 2 ( 19 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 56 ( 56 ) Summary = 370 ( 370 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 56 ( 56 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 151 ( 151 )
-TOLERANCE : MaxTol = 0.009167989686 ( 0.009167989684 ) AvgTol = 0.0002906517901 ( 0.0002908081263 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 19 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 56 -shape 370
+checkstatshape res_1 -solid 1 -shell 1 -face 56 -freewire 0 -freeedge 0 -sharededge 151
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.009167989684 -avg 0.0002908081263]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 19 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 56 -shape 370 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 56 -freewire 0 -freeedge 0 -sharededge 151 -max_solid 1 -max_shell 1 -max_face 56 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.009167989686 -avg 0.0002906517901 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename bm2_ca_leverrod-A.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 17 ) Summary = 0 ( 17 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 60 ( 60 ) Summary = 404 ( 404 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 60 ( 60 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 167 ( 167 )
-TOLERANCE : MaxTol = 0.009168081366 ( 0.009168081364 ) AvgTol = 0.0003869985721 ( 0.0003872794305 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 17 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 60 -shape 404
+checkstatshape res_1 -solid 1 -shell 1 -face 60 -freewire 0 -freeedge 0 -sharededge 167
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.009168081364 -avg 0.0003872794305]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 17 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 60 -shape 404 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 60 -freewire 0 -freeedge 0 -sharededge 167 -max_solid 1 -max_shell 1 -max_face 60 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.009168081366 -avg 0.0003869985721 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: NBSHAPES : Faulty"
-
set filename bm2_ca_t4-A.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 12 ( 30 ) Summary = 12 ( 30 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 12 ( 12 ) Face = 12 ( 12 ) Summary = 198 ( 201 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 12 ( 12 ) Face = 12 ( 12 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 56 ( 59 )
-TOLERANCE : MaxTol = 0.003925171889 ( 0.003925171887 ) AvgTol = 0.001060259617 ( 0.001049358279 )
-LABELS : N0Labels = 3 ( 3 ) N1Labels = 2 ( 2 ) N2Labels = 0 ( 0 ) TotalLabels = 5 ( 5 ) NameLabels = 5 ( 5 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 30 -max_faults 0
+checkxstat D_First -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 12 -face 12 -shape 201
+checkstatshape res_1 -solid 0 -shell 12 -face 12 -freewire 0 -freeedge 0 -sharededge 59
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.003925171887 -avg 0.001049358279]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 30 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 12 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 12 -face 12 -shape 198 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 12 -face 12 -freewire 0 -freeedge 0 -sharededge 56 -max_solid 0 -max_shell 12 -max_face 12 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.003925171889 -avg 0.001060259617 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
-
set filename bm2_ct_lever-A.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 3 ( 1 ) Summary = 3 ( 1 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 70 ( 70 ) Summary = 444 ( 444 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 70 ( 70 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 182 ( 182 )
-TOLERANCE : MaxTol = 0.0001813865816 ( 0.0001813865816 ) AvgTol = 5.873595719e-006 ( 5.873595693e-006 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 70 -shape 444
+checkstatshape res_1 -solid 1 -shell 1 -face 70 -freewire 0 -freeedge 0 -sharededge 182
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.0001813865816 -avg 5.873595693e-006]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 3 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 70 -shape 444 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 70 -freewire 0 -freeedge 0 -sharededge 182 -max_solid 1 -max_shell 1 -max_face 70 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.0001813865816 -avg 5.873595719e-006 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename bm2_ec_exhaust-A.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 6 ( 6 ) Shell = 6 ( 6 ) Face = 58 ( 58 ) Summary = 329 ( 329 )
-STATSHAPE : Solid = 6 ( 6 ) Shell = 6 ( 6 ) Face = 58 ( 58 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 116 ( 116 )
-TOLERANCE : MaxTol = 3.747413396 ( 3.773005335 ) AvgTol = 0.2774758019 ( 0.2792993142 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 6 -shell 6 -face 58 -shape 329
+checkstatshape res_1 -solid 6 -shell 6 -face 58 -freewire 0 -freeedge 0 -sharededge 116
+set max_tol_res_1 [checkmaxtol res_1 -tol 3.773005335 -avg 0.2792993142]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 6 -shell 6 -face 58 -shape 329 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 6 -shell 6 -face 58 -freewire 0 -freeedge 0 -sharededge 116 -max_solid 6 -max_shell 6 -max_face 58 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 3.747413396 -avg 0.2774758019 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename bm2_ec_lever-A.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 49 ( 49 ) Summary = 325 ( 325 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 49 ( 49 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 132 ( 132 )
-TOLERANCE : MaxTol = 1.254434245e-007 ( 1.254434245e-007 ) AvgTol = 1.008543507e-007 ( 1.008543507e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 49 -shape 325
+checkstatshape res_1 -solid 1 -shell 1 -face 49 -freewire 0 -freeedge 0 -sharededge 132
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.254434245e-007 -avg 1.008543507e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 49 -shape 325 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 49 -freewire 0 -freeedge 0 -sharededge 132 -max_solid 1 -max_shell 1 -max_face 49 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.254434245e-007 -avg 1.008543507e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename bm2_ec_leverrod-A.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 49 ( 49 ) Summary = 325 ( 325 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 49 ( 49 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 132 ( 132 )
-TOLERANCE : MaxTol = 1.254434245e-007 ( 1.254434245e-007 ) AvgTol = 1.008543507e-007 ( 1.008543507e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 49 -shape 325
+checkstatshape res_1 -solid 1 -shell 1 -face 49 -freewire 0 -freeedge 0 -sharededge 132
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.254434245e-007 -avg 1.008543507e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 49 -shape 325 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 49 -freewire 0 -freeedge 0 -sharededge 132 -max_solid 1 -max_shell 1 -max_face 49 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.254434245e-007 -avg 1.008543507e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename bm2_ec_t4-A.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 1 ) Summary = 0 ( 1 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 3 ( 3 ) Face = 13 ( 13 ) Summary = 122 ( 122 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 3 ( 3 ) Face = 13 ( 13 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 50 ( 50 )
-TOLERANCE : MaxTol = 0.0004295981946 ( 0.0007438758064 ) AvgTol = 0.0001494349823 ( 0.000206922489 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 3 -face 13 -shape 122
+checkstatshape res_1 -solid 0 -shell 3 -face 13 -freewire 0 -freeedge 0 -sharededge 50
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.0007438758064 -avg 0.000206922489]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 3 -face 13 -shape 122 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 3 -face 13 -freewire 0 -freeedge 0 -sharededge 50 -max_solid 0 -max_shell 3 -max_face 13 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.0004295981946 -avg 0.0001494349823 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename bm2_id_lever-A.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 7 ( 7 ) Summary = 7 ( 7 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 63 ( 63 ) Summary = 397 ( 397 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 63 ( 63 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 161 ( 161 )
-TOLERANCE : MaxTol = 0.003354436772 ( 0.005782871451 ) AvgTol = 9.01049205e-005 ( 0.0002474592456 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 7 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 63 -shape 397
+checkstatshape res_1 -solid 1 -shell 1 -face 63 -freewire 0 -freeedge 0 -sharededge 161
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.005782871451 -avg 0.0002474592456]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 7 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 7 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 63 -shape 397 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 63 -freewire 0 -freeedge 0 -sharededge 161 -max_solid 1 -max_shell 1 -max_face 63 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.003354436772 -avg 9.01049205e-005 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename bm2_id_lever-B.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 1 ( 3 ) Summary = 1 ( 3 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 63 ( 63 ) Summary = 397 ( 397 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 63 ( 63 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 161 ( 161 )
-TOLERANCE : MaxTol = 0.003354570949 ( 0.004866377804 ) AvgTol = 9.013170155e-005 ( 0.0002225463723 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 3 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 63 -shape 397
+checkstatshape res_1 -solid 1 -shell 1 -face 63 -freewire 0 -freeedge 0 -sharededge 161
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.004866377804 -avg 0.0002225463723]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 3 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 63 -shape 397 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 63 -freewire 0 -freeedge 0 -sharededge 161 -max_solid 1 -max_shell 1 -max_face 63 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.003354570949 -avg 9.013170155e-005 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename bm2_id_leverrod-A.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 7 ( 7 ) Summary = 7 ( 7 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 63 ( 63 ) Summary = 397 ( 397 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 63 ( 63 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 161 ( 161 )
-TOLERANCE : MaxTol = 0.003354436772 ( 0.005782871451 ) AvgTol = 9.01049205e-005 ( 0.0002474592456 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 7 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 63 -shape 397
+checkstatshape res_1 -solid 1 -shell 1 -face 63 -freewire 0 -freeedge 0 -sharededge 161
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.005782871451 -avg 0.0002474592456]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 7 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 7 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 63 -shape 397 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 63 -freewire 0 -freeedge 0 -sharededge 161 -max_solid 1 -max_shell 1 -max_face 63 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.003354436772 -avg 9.01049205e-005 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename bm2_id_leverrod-B.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 1 ( 4 ) Summary = 1 ( 4 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 63 ( 63 ) Summary = 397 ( 397 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 63 ( 63 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 161 ( 161 )
-TOLERANCE : MaxTol = 0.003354570949 ( 0.004866377804 ) AvgTol = 9.015270484e-005 ( 0.000222559965 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 63 -shape 397
+checkstatshape res_1 -solid 1 -shell 1 -face 63 -freewire 0 -freeedge 0 -sharededge 161
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.004866377804 -avg 0.000222559965]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 63 -shape 397 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 63 -freewire 0 -freeedge 0 -sharededge 161 -max_solid 1 -max_shell 1 -max_face 63 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.003354570949 -avg 9.015270484e-005 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
-
set filename bm2_ie_lever-C.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 9 ( 7 ) Summary = 9 ( 7 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 51 ( 51 ) Summary = 333 ( 333 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 51 ( 51 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 135 ( 135 )
-TOLERANCE : MaxTol = 2.885723252e-007 ( 0.005189489581 ) AvgTol = 1.021399653e-007 ( 0.0002274307219 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 7 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 51 -shape 333
+checkstatshape res_1 -solid 1 -shell 1 -face 51 -freewire 0 -freeedge 0 -sharededge 135
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.005189489581 -avg 0.0002274307219]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 7 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 7 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 51 -shape 333 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 51 -freewire 0 -freeedge 0 -sharededge 135 -max_solid 1 -max_shell 1 -max_face 51 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 2.885723252e-007 -avg 1.021399653e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
-
set filename bm2_ie_leverrod-C.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 12 ( 7 ) Summary = 12 ( 7 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 51 ( 51 ) Summary = 335 ( 335 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 51 ( 51 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 136 ( 136 )
-TOLERANCE : MaxTol = 0.000304966156 ( 0.005189422784 ) AvgTol = 4.319600685e-006 ( 0.0002258553417 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 7 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 51 -shape 335
+checkstatshape res_1 -solid 1 -shell 1 -face 51 -freewire 0 -freeedge 0 -sharededge 136
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.005189422784 -avg 0.0002258553417]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 7 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 11 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 51 -shape 335 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 51 -freewire 0 -freeedge 0 -sharededge 136 -max_solid 1 -max_shell 1 -max_face 51 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.000304966156 -avg 4.319600685e-006 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename bm2_ie_t4-A.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 15 ( 15 ) Face = 16 ( 16 ) Summary = 173 ( 173 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 15 ( 15 ) Face = 16 ( 16 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 62 ( 62 )
-TOLERANCE : MaxTol = 0.005727453836 ( 0.005727453946 ) AvgTol = 0.001247002691 ( 0.001247002697 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 15 -face 16 -shape 173
+checkstatshape res_1 -solid 0 -shell 15 -face 16 -freewire 0 -freeedge 0 -sharededge 62
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.005727453946 -avg 0.001247002697]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 15 -face 16 -shape 173 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 15 -face 16 -freewire 0 -freeedge 0 -sharededge 62 -max_solid 0 -max_shell 15 -max_face 16 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.005727453836 -avg 0.001247002691 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename bm2_ie_t4-B.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 15 ( 15 ) Face = 16 ( 16 ) Summary = 173 ( 173 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 15 ( 15 ) Face = 16 ( 16 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 62 ( 62 )
-TOLERANCE : MaxTol = 0.009569158984 ( 0.009569158985 ) AvgTol = 0.002156301466 ( 0.002156301479 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 15 -face 16 -shape 173
+checkstatshape res_1 -solid 0 -shell 15 -face 16 -freewire 0 -freeedge 0 -sharededge 62
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.009569158985 -avg 0.002156301479]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 15 -face 16 -shape 173 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 15 -face 16 -freewire 0 -freeedge 0 -sharededge 62 -max_solid 0 -max_shell 15 -max_face 16 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.009569158984 -avg 0.002156301466 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename bm2_ie_t4-C.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 7 ( 7 ) Summary = 7 ( 7 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 15 ( 15 ) Face = 16 ( 16 ) Summary = 173 ( 173 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 15 ( 15 ) Face = 16 ( 16 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 62 ( 62 )
-TOLERANCE : MaxTol = 0.005727453811 ( 0.005727453948 ) AvgTol = 0.001246989294 ( 0.001246989308 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 7 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 15 -face 16 -shape 173
+checkstatshape res_1 -solid 0 -shell 15 -face 16 -freewire 0 -freeedge 0 -sharededge 62
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.005727453948 -avg 0.001246989308]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 7 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 7 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 15 -face 16 -shape 173 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 15 -face 16 -freewire 0 -freeedge 0 -sharededge 62 -max_solid 0 -max_shell 15 -max_face 16 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.005727453811 -avg 0.001246989294 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
-
set filename bm2_pe_leverrod-A.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 3 ( 0 ) Summary = 3 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 73 ( 73 ) Summary = 469 ( 469 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 73 ( 73 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 194 ( 194 )
-TOLERANCE : MaxTol = 0.2144663085 ( 0.2144663085 ) AvgTol = 0.003931550309 ( 0.01531627646 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 73 -shape 469
+checkstatshape res_1 -solid 1 -shell 1 -face 73 -freewire 0 -freeedge 0 -sharededge 194
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.2144663085 -avg 0.01531627646]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 3 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 73 -shape 469 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 73 -freewire 0 -freeedge 0 -sharededge 194 -max_solid 1 -max_shell 1 -max_face 73 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.2144663085 -avg 0.003931550309 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename bm2_pe_leverrod-B.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 73 ( 73 ) Summary = 471 ( 471 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 73 ( 73 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 195 ( 195 )
-TOLERANCE : MaxTol = 0.002772705081 ( 0.007671422015 ) AvgTol = 0.0001862241325 ( 0.0004076685863 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 73 -shape 471
+checkstatshape res_1 -solid 1 -shell 1 -face 73 -freewire 0 -freeedge 0 -sharededge 195
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.007671422015 -avg 0.0004076685863]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 73 -shape 471 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 73 -freewire 0 -freeedge 0 -sharededge 195 -max_solid 1 -max_shell 1 -max_face 73 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.002772705081 -avg 0.0001862241325 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename bm2_pe_leverrod-C.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 73 ( 73 ) Summary = 471 ( 471 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 73 ( 73 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 195 ( 195 )
-TOLERANCE : MaxTol = 0.002169065527 ( 0.004310633963 ) AvgTol = 0.0001558899524 ( 0.0002499195251 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 73 -shape 471
+checkstatshape res_1 -solid 1 -shell 1 -face 73 -freewire 0 -freeedge 0 -sharededge 195
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.004310633963 -avg 0.0002499195251]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 73 -shape 471 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 73 -freewire 0 -freeedge 0 -sharededge 195 -max_solid 1 -max_shell 1 -max_face 73 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.002169065527 -avg 0.0001558899524 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename bm2_sd_lever-A.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 70 ( 70 ) Summary = 440 ( 440 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 70 ( 70 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 179 ( 179 )
-TOLERANCE : MaxTol = 5.221593683e-007 ( 5.221585661e-007 ) AvgTol = 1.103393727e-007 ( 1.10339353e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 16 ( 16 ) N2Labels = 0 ( 0 ) TotalLabels = 17 ( 17 ) NameLabels = 1 ( 1 ) ColorLabels = 16 ( 16 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 3 ( 3 )
-COLORS : Colors = BLUE1 GREEN RED ( BLUE1 GREEN RED )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 16 -n2 0 -total 17 -withname 1 -withcolor 16 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 GREEN RED } -nbcolors 3 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 70 -shape 440
+checkstatshape res_1 -solid 1 -shell 1 -face 70 -freewire 0 -freeedge 0 -sharededge 179
+set max_tol_res_1 [checkmaxtol res_1 -tol 5.221585661e-007 -avg 1.10339353e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 16 -n2 0 -total 17 -withname 1 -withcolor 16 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 3 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 16 -n2 0 -total 17 -withname 1 -withcolor 16 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 GREEN RED } -nbcolors 3 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 70 -shape 440 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 70 -freewire 0 -freeedge 0 -sharededge 179 -max_solid 1 -max_shell 1 -max_face 70 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 5.221593683e-007 -avg 1.103393727e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename bm2_sd_lever-B.stp
-set ref_data {
-DATA : Faulties = 0 ( 85 ) Warnings = 0 ( 0 ) Summary = 0 ( 85 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 70 ( 70 ) Summary = 440 ( 440 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 70 ( 70 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 179 ( 179 )
-TOLERANCE : MaxTol = 5.202162466e-007 ( 5.20213443e-007 ) AvgTol = 1.102850063e-007 ( 1.102849442e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 16 ( 16 ) N2Labels = 0 ( 0 ) TotalLabels = 17 ( 17 ) NameLabels = 1 ( 1 ) ColorLabels = 16 ( 16 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 3 ( 3 )
-COLORS : Colors = BLUE1 GREEN RED ( BLUE1 GREEN RED )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 255 -max_faults 85
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+checkxstat D_First -n0 1 -n1 16 -n2 0 -total 17 -withname 1 -withcolor 16 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 GREEN RED } -nbcolors 3 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 70 -shape 440
+checkstatshape res_1 -solid 1 -shell 1 -face 70 -freewire 0 -freeedge 0 -sharededge 179
+set max_tol_res_1 [checkmaxtol res_1 -tol 5.20213443e-007 -avg 1.102849442e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 255 -max_faults 85
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 16 -n2 0 -total 17 -withname 1 -withcolor 16 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 3 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 16 -n2 0 -total 17 -withname 1 -withcolor 16 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 GREEN RED } -nbcolors 3 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 70 -shape 440 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 70 -freewire 0 -freeedge 0 -sharededge 179 -max_solid 1 -max_shell 1 -max_face 70 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 5.202162466e-007 -avg 1.102850063e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename bm2_sd_leverrod-A.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 74 ( 74 ) Summary = 466 ( 466 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 74 ( 74 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 189 ( 189 )
-TOLERANCE : MaxTol = 5.221593683e-007 ( 5.221585661e-007 ) AvgTol = 1.199942784e-007 ( 1.199944642e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 16 ( 16 ) N2Labels = 0 ( 0 ) TotalLabels = 17 ( 17 ) NameLabels = 1 ( 1 ) ColorLabels = 16 ( 16 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 3 ( 3 )
-COLORS : Colors = BLUE1 GREEN RED ( BLUE1 GREEN RED )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 16 -n2 0 -total 17 -withname 1 -withcolor 16 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 GREEN RED } -nbcolors 3 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 74 -shape 466
+checkstatshape res_1 -solid 1 -shell 1 -face 74 -freewire 0 -freeedge 0 -sharededge 189
+set max_tol_res_1 [checkmaxtol res_1 -tol 5.221585661e-007 -avg 1.199944642e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 16 -n2 0 -total 17 -withname 1 -withcolor 16 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 3 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 16 -n2 0 -total 17 -withname 1 -withcolor 16 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 GREEN RED } -nbcolors 3 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 74 -shape 466 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 74 -freewire 0 -freeedge 0 -sharededge 189 -max_solid 1 -max_shell 1 -max_face 74 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 5.221593683e-007 -avg 1.199942784e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename bm2_sd_leverrod-B.stp
-set ref_data {
-DATA : Faulties = 0 ( 93 ) Warnings = 0 ( 0 ) Summary = 0 ( 93 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 74 ( 74 ) Summary = 466 ( 466 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 74 ( 74 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 189 ( 189 )
-TOLERANCE : MaxTol = 5.202162466e-007 ( 5.20213443e-007 ) AvgTol = 1.20030989e-007 ( 1.200309448e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 16 ( 16 ) N2Labels = 0 ( 0 ) TotalLabels = 17 ( 17 ) NameLabels = 1 ( 1 ) ColorLabels = 16 ( 16 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 3 ( 3 )
-COLORS : Colors = BLUE1 GREEN RED ( BLUE1 GREEN RED )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 279 -max_faults 93
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+checkxstat D_First -n0 1 -n1 16 -n2 0 -total 17 -withname 1 -withcolor 16 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 GREEN RED } -nbcolors 3 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 74 -shape 466
+checkstatshape res_1 -solid 1 -shell 1 -face 74 -freewire 0 -freeedge 0 -sharededge 189
+set max_tol_res_1 [checkmaxtol res_1 -tol 5.20213443e-007 -avg 1.200309448e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 279 -max_faults 93
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 16 -n2 0 -total 17 -withname 1 -withcolor 16 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 3 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 16 -n2 0 -total 17 -withname 1 -withcolor 16 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 GREEN RED } -nbcolors 3 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 74 -shape 466 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 74 -freewire 0 -freeedge 0 -sharededge 189 -max_solid 1 -max_shell 1 -max_face 74 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 5.202162466e-007 -avg 1.20030989e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename bm2_sd_t4-A.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 1 ) Summary = 0 ( 1 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 7 ( 7 ) Summary = 61 ( 61 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 7 ( 7 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 25 ( 25 )
-TOLERANCE : MaxTol = 5.457611385e-007 ( 5.468279835e-007 ) AvgTol = 1.450502415e-007 ( 1.446043389e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 1 -face 7 -shape 61
+checkstatshape res_1 -solid 0 -shell 1 -face 7 -freewire 0 -freeedge 0 -sharededge 25
+set max_tol_res_1 [checkmaxtol res_1 -tol 5.468279835e-007 -avg 1.446043389e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 1 -face 7 -shape 61 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 1 -face 7 -freewire 0 -freeedge 0 -sharededge 25 -max_solid 0 -max_shell 1 -max_face 7 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 5.457611385e-007 -avg 1.450502415e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename bm2_sd_t4-B.stp
-set ref_data {
-DATA : Faulties = 0 ( 18 ) Warnings = 0 ( 0 ) Summary = 0 ( 18 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 1 ) Summary = 0 ( 1 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 7 ( 7 ) Summary = 61 ( 61 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 7 ( 7 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 25 ( 25 )
-TOLERANCE : MaxTol = 5.468086661e-007 ( 5.468279386e-007 ) AvgTol = 1.446013285e-007 ( 1.446034587e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 54 -max_faults 18
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 1 -face 7 -shape 61
+checkstatshape res_1 -solid 0 -shell 1 -face 7 -freewire 0 -freeedge 0 -sharededge 25
+set max_tol_res_1 [checkmaxtol res_1 -tol 5.468279386e-007 -avg 1.446034587e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 54 -max_faults 18
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 1 -face 7 -shape 61 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 1 -face 7 -freewire 0 -freeedge 0 -sharededge 25 -max_solid 0 -max_shell 1 -max_face 7 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 5.468086661e-007 -avg 1.446013285e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename bm2_sy_t4-A.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 1 ( 1 ) Summary = 1 ( 1 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 6 ( 6 ) Face = 6 ( 6 ) Summary = 102 ( 96 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 6 ( 6 ) Face = 6 ( 6 ) FreeWire = 0 ( 0 ) FreeEdge = 6 ( 6 ) SharedEdge = 35 ( 35 )
-TOLERANCE : MaxTol = 0.01889093091 ( 0.01889093091 ) AvgTol = 0.001105659119 ( 0.001105659119 )
-LABELS : N0Labels = 3 ( 3 ) N1Labels = 20 ( 20 ) N2Labels = 0 ( 0 ) TotalLabels = 23 ( 23 ) NameLabels = 5 ( 5 ) ColorLabels = 12 ( 12 ) LayerLabels = 12 ( 12 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = CHOCOLATE1 TURQUOISE ( CHOCOLATE1 TURQUOISE )
-NLAYERS : NLayers = 6 ( 6 )
-LAYERS : Layers = 1 2 3 4 6 X ( 1 2 3 4 6 X )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+checkxstat D_First -n0 3 -n1 20 -n2 0 -total 23 -withname 5 -withcolor 12 -withlayer 12 -centroid 0 -volume 0 -area 0 -colors { CHOCOLATE1 TURQUOISE } -nbcolors 2 -layers { 1 2 3 4 6 X } -nblayers 6
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 6 -face 6 -shape 96
+checkstatshape res_1 -solid 0 -shell 6 -face 6 -freewire 0 -freeedge 6 -sharededge 35
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.01889093091 -avg 0.001105659119]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3 -n1 20 -n2 0 -total 23 -withname 5 -withcolor 12 -withlayer 12 -centroid 0 -volume 0 -area 0 -nbcolors 2 -nblayers 6
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 20 -n2 0 -total 23 -withname 5 -withcolor 12 -withlayer 12 -centroid 0 -volume 0 -area 0 -colors { CHOCOLATE1 TURQUOISE } -nbcolors 2 -layers { 1 2 3 4 6 X } -nblayers 6
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 6 -face 6 -shape 102 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 6 -face 6 -freewire 0 -freeedge 6 -sharededge 35 -max_solid 0 -max_shell 6 -max_face 6 -max_freewire 0 -max_freeedge 6
+checkmaxtol res_2 -tol 0.01889093091 -avg 0.001105659119 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename bm2_ug_leverrod-A.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 7 ) Summary = 0 ( 7 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 56 ( 56 ) Summary = 364 ( 364 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 56 ( 56 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 148 ( 148 )
-TOLERANCE : MaxTol = 5.670204875e-006 ( 1e-005 ) AvgTol = 3.436934338e-007 ( 1.247008617e-006 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 7 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 56 -shape 364
+checkstatshape res_1 -solid 1 -shell 1 -face 56 -freewire 0 -freeedge 0 -sharededge 148
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-005 -avg 1.247008617e-006]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 7 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 56 -shape 364 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 56 -freewire 0 -freeedge 0 -sharededge 148 -max_solid 1 -max_shell 1 -max_face 56 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 5.670204875e-006 -avg 3.436934338e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: NBSHAPES : Faulty"
-
set filename bm4_ca_eye.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 6 ( 11 ) Summary = 6 ( 11 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 86 ( 86 ) Summary = 496 ( 498 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 86 ( 86 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 207 ( 209 )
-TOLERANCE : MaxTol = 0.03778327591 ( 0.03778327591 ) AvgTol = 0.001249318063 ( 0.001282100812 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 11 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 86 -shape 498
+checkstatshape res_1 -solid 1 -shell 1 -face 86 -freewire 0 -freeedge 0 -sharededge 209
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.03778327591 -avg 0.001282100812]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 11 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 6 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 86 -shape 496 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 86 -freewire 0 -freeedge 0 -sharededge 207 -max_solid 1 -max_shell 1 -max_face 86 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.03778327591 -avg 0.001249318063 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename bm4_ct_eye.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 25 ( 27 ) Summary = 25 ( 27 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 5 ( 5 ) Face = 87 ( 87 ) Summary = 536 ( 536 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 5 ( 5 ) Face = 87 ( 87 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 220 ( 220 )
-TOLERANCE : MaxTol = 0.001640491495 ( 0.0154023028 ) AvgTol = 0.0003285396147 ( 0.001132378182 )
-LABELS : N0Labels = 3 ( 3 ) N1Labels = 8 ( 8 ) N2Labels = 0 ( 0 ) TotalLabels = 11 ( 11 ) NameLabels = 5 ( 5 ) ColorLabels = 7 ( 7 ) LayerLabels = 5 ( 5 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 3 ( 3 )
-COLORS : Colors = GREEN MAGENTA4 YELLOW ( GREEN MAGENTA4 YELLOW )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 0 ( 0 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 26 -max_faults 0
+checkxstat D_First -n0 3 -n1 8 -n2 0 -total 11 -withname 5 -withcolor 7 -withlayer 5 -centroid 0 -volume 0 -area 0 -colors { GREEN MAGENTA4 YELLOW } -nbcolors 3 -layers { 0 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 5 -face 87 -shape 536
+checkstatshape res_1 -solid 1 -shell 5 -face 87 -freewire 0 -freeedge 0 -sharededge 220
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.0154023028 -avg 0.001132378182]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 26 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 7 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3 -n1 8 -n2 0 -total 11 -withname 5 -withcolor 7 -withlayer 5 -centroid 0 -volume 0 -area 0 -nbcolors 3 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 8 -n2 0 -total 11 -withname 5 -withcolor 7 -withlayer 5 -centroid 0 -volume 0 -area 0 -colors { GREEN MAGENTA4 YELLOW } -nbcolors 3 -layers { 0 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 5 -face 87 -shape 536 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 5 -face 87 -freewire 0 -freeedge 0 -sharededge 220 -max_solid 1 -max_shell 5 -max_face 87 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.001640491495 -avg 0.0003285396147 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
-
set filename bm4_id_eye_a.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 8 ( 5 ) Summary = 8 ( 5 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 72 ( 72 ) Summary = 422 ( 422 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 72 ( 72 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 175 ( 175 )
-TOLERANCE : MaxTol = 0.003734968074 ( 0.009941326565 ) AvgTol = 0.0003603377154 ( 0.0006897182502 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 116 ( 116 ) N2Labels = 0 ( 0 ) TotalLabels = 117 ( 117 ) NameLabels = 1 ( 1 ) ColorLabels = 117 ( 117 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = MAGENTA1 RED ( MAGENTA1 RED )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 5 -max_faults 0
+checkxstat D_First -n0 1 -n1 116 -n2 0 -total 117 -withname 1 -withcolor 117 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { MAGENTA1 RED } -nbcolors 2 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 72 -shape 422
+checkstatshape res_1 -solid 1 -shell 1 -face 72 -freewire 0 -freeedge 0 -sharededge 175
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.009941326565 -avg 0.0006897182502]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 5 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 116 -n2 0 -total 117 -withname 1 -withcolor 117 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 2 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 116 -n2 0 -total 117 -withname 1 -withcolor 117 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { MAGENTA1 RED } -nbcolors 2 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 72 -shape 422 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 72 -freewire 0 -freeedge 0 -sharededge 175 -max_solid 1 -max_shell 1 -max_face 72 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.003734968074 -avg 0.0003603377154 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
-
set filename bm4_id_eye_b.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 6 ( 5 ) Summary = 6 ( 5 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 72 ( 72 ) Summary = 422 ( 422 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 72 ( 72 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 175 ( 175 )
-TOLERANCE : MaxTol = 0.003734968074 ( 0.008476378102 ) AvgTol = 0.0003702712832 ( 0.0009328150641 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 116 ( 116 ) N2Labels = 0 ( 0 ) TotalLabels = 117 ( 117 ) NameLabels = 1 ( 1 ) ColorLabels = 117 ( 117 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = MAGENTA1 RED ( MAGENTA1 RED )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 5 -max_faults 0
+checkxstat D_First -n0 1 -n1 116 -n2 0 -total 117 -withname 1 -withcolor 117 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { MAGENTA1 RED } -nbcolors 2 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 72 -shape 422
+checkstatshape res_1 -solid 1 -shell 1 -face 72 -freewire 0 -freeedge 0 -sharededge 175
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.008476378102 -avg 0.0009328150641]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 5 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 116 -n2 0 -total 117 -withname 1 -withcolor 117 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 2 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 116 -n2 0 -total 117 -withname 1 -withcolor 117 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { MAGENTA1 RED } -nbcolors 2 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 72 -shape 422 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 72 -freewire 0 -freeedge 0 -sharededge 175 -max_solid 1 -max_shell 1 -max_face 72 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.003734968074 -avg 0.0003702712832 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
-set LinuxDiff 4
-set LinuxFaulties {STATSHAPE TPSTAT}
set filename bm4_id_punch_b.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 9 ( 13 ) Summary = 9 ( 13 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 5 ( 5 ) Shell = 6 ( 6 ) Face = 186 ( 186 ) Summary = 1310 ( 1291 )
-STATSHAPE : Solid = 5 ( 5 ) Shell = 6 ( 6 ) Face = 186 ( 186 ) FreeWire = 0 ( 0 ) FreeEdge = 6 ( 6 ) SharedEdge = 524 ( 524 )
-TOLERANCE : MaxTol = 0.007713500664 ( 0.00997839292 ) AvgTol = 0.0007516875718 ( 0.001114041492 )
-LABELS : N0Labels = 7 ( 7 ) N1Labels = 10 ( 6 ) N2Labels = 0 ( 0 ) TotalLabels = 17 ( 13 ) NameLabels = 13 ( 13 ) ColorLabels = 6 ( 4 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 3 ( 3 )
-COLORS : Colors = BLUE1 GREEN RED ( BLUE1 GREEN RED )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 14 -max_faults 0
+checkxstat D_First -n0 7 -n1 6 -n2 0 -total 13 -withname 13 -withcolor 4 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 GREEN RED } -nbcolors 3 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 5 -shell 6 -face 186 -shape 1291
+checkstatshape res_1 -solid 5 -shell 6 -face 186 -freewire 0 -freeedge 6 -sharededge 524
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.00997839292 -avg 0.001114041492]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 14 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 7 -n1 6 -n2 0 -total 13 -withname 13 -withcolor 4 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 3 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 7 -n1 10 -n2 0 -total 17 -withname 13 -withcolor 6 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 GREEN RED } -nbcolors 3 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 5 -shell 6 -face 186 -shape 1310 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 5 -shell 6 -face 186 -freewire 0 -freeedge 6 -sharededge 524 -max_solid 5 -max_shell 6 -max_face 186 -max_freewire 0 -max_freeedge 6
+checkmaxtol res_2 -tol 0.007713500664 -avg 0.0007516875718 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
-
set filename bm4_pe_punch_a.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 13 ( 0 ) Summary = 13 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 3 ( 3 ) Shell = 4 ( 4 ) Face = 182 ( 182 ) Summary = 1237 ( 1237 )
-STATSHAPE : Solid = 3 ( 3 ) Shell = 4 ( 4 ) Face = 182 ( 182 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 500 ( 500 )
-TOLERANCE : MaxTol = 0.009731472373 ( 0.01295381237 ) AvgTol = 0.0003805396289 ( 0.0007344871275 )
-LABELS : N0Labels = 5 ( 5 ) N1Labels = 37 ( 37 ) N2Labels = 0 ( 0 ) TotalLabels = 42 ( 42 ) NameLabels = 9 ( 9 ) ColorLabels = 4 ( 4 ) LayerLabels = 33 ( 33 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 3 ( 3 )
-COLORS : Colors = BLUE1 GREEN RED ( BLUE1 GREEN RED )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = A_FLAECHEN ( A_FLAECHEN )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 5 -n1 37 -n2 0 -total 42 -withname 9 -withcolor 4 -withlayer 33 -centroid 0 -volume 0 -area 0 -colors { BLUE1 GREEN RED } -nbcolors 3 -layers { A_FLAECHEN } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 3 -shell 4 -face 182 -shape 1237
+checkstatshape res_1 -solid 3 -shell 4 -face 182 -freewire 0 -freeedge 0 -sharededge 500
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.01295381237 -avg 0.0007344871275]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 11 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 5 -n1 37 -n2 0 -total 42 -withname 9 -withcolor 4 -withlayer 33 -centroid 0 -volume 0 -area 0 -nbcolors 3 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 5 -n1 37 -n2 0 -total 42 -withname 9 -withcolor 4 -withlayer 33 -centroid 0 -volume 0 -area 0 -colors { BLUE1 GREEN RED } -nbcolors 3 -layers { A_FLAECHEN } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 3 -shell 4 -face 182 -shape 1237 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 3 -shell 4 -face 182 -freewire 0 -freeedge 0 -sharededge 500 -max_solid 3 -max_shell 4 -max_face 182 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.009731472373 -avg 0.0003805396289 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename bm4_ug_punch_a.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 4 ( 14 ) Summary = 4 ( 14 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 3 ( 3 ) Shell = 36 ( 36 ) Face = 186 ( 186 ) Summary = 1404 ( 1404 )
-STATSHAPE : Solid = 3 ( 3 ) Shell = 36 ( 36 ) Face = 186 ( 186 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 548 ( 548 )
-TOLERANCE : MaxTol = 0.007676795012 ( 0.01770527621 ) AvgTol = 0.0001484880722 ( 0.0002069115043 )
-LABELS : N0Labels = 5 ( 5 ) N1Labels = 37 ( 37 ) N2Labels = 0 ( 0 ) TotalLabels = 42 ( 42 ) NameLabels = 9 ( 9 ) ColorLabels = 36 ( 36 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 3 ( 3 )
-COLORS : Colors = MAGENTA1 MEDIUMSEAGREEN RED4 ( MAGENTA1 MEDIUMSEAGREEN RED4 )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 14 -max_faults 0
+checkxstat D_First -n0 5 -n1 37 -n2 0 -total 42 -withname 9 -withcolor 36 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { MAGENTA1 MEDIUMSEAGREEN RED4 } -nbcolors 3 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 3 -shell 36 -face 186 -shape 1404
+checkstatshape res_1 -solid 3 -shell 36 -face 186 -freewire 0 -freeedge 0 -sharededge 548
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.01770527621 -avg 0.0002069115043]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 14 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 5 -n1 37 -n2 0 -total 42 -withname 9 -withcolor 36 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 3 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 5 -n1 37 -n2 0 -total 42 -withname 9 -withcolor 36 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { MAGENTA1 MEDIUMSEAGREEN RED4 } -nbcolors 3 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 3 -shell 36 -face 186 -shape 1404 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 3 -shell 36 -face 186 -freewire 0 -freeedge 0 -sharededge 548 -max_solid 3 -max_shell 36 -max_face 186 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.007676795012 -avg 0.0001484880722 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename bm4_ug_punch_b.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 8 ( 14 ) Summary = 8 ( 14 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 3 ( 3 ) Shell = 36 ( 36 ) Face = 186 ( 186 ) Summary = 1404 ( 1404 )
-STATSHAPE : Solid = 3 ( 3 ) Shell = 36 ( 36 ) Face = 186 ( 186 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 548 ( 548 )
-TOLERANCE : MaxTol = 0.001493912454 ( 0.001493912451 ) AvgTol = 2.362820375e-005 ( 2.427787539e-005 )
-LABELS : N0Labels = 5 ( 5 ) N1Labels = 37 ( 37 ) N2Labels = 0 ( 0 ) TotalLabels = 42 ( 42 ) NameLabels = 9 ( 9 ) ColorLabels = 36 ( 36 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 3 ( 3 )
-COLORS : Colors = MAGENTA1 MEDIUMSEAGREEN RED4 ( MAGENTA1 MEDIUMSEAGREEN RED4 )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 14 -max_faults 0
+checkxstat D_First -n0 5 -n1 37 -n2 0 -total 42 -withname 9 -withcolor 36 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { MAGENTA1 MEDIUMSEAGREEN RED4 } -nbcolors 3 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 3 -shell 36 -face 186 -shape 1404
+checkstatshape res_1 -solid 3 -shell 36 -face 186 -freewire 0 -freeedge 0 -sharededge 548
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.001493912451 -avg 2.427787539e-005]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 14 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 8 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 5 -n1 37 -n2 0 -total 42 -withname 9 -withcolor 36 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 3 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 5 -n1 37 -n2 0 -total 42 -withname 9 -withcolor 36 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { MAGENTA1 MEDIUMSEAGREEN RED4 } -nbcolors 3 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 3 -shell 36 -face 186 -shape 1404 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 3 -shell 36 -face 186 -freewire 0 -freeedge 0 -sharededge 548 -max_solid 3 -max_shell 36 -max_face 186 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.001493912454 -avg 2.362820375e-005 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename ca_turbine.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 4 ( 31 ) Summary = 4 ( 31 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 36 ( 36 ) Summary = 217 ( 217 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 36 ( 36 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 91 ( 91 )
-TOLERANCE : MaxTol = 0.01020931331 ( 0.01035100426 ) AvgTol = 0.003113738803 ( 0.003154065333 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 31 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 1 -face 36 -shape 217
+checkstatshape res_1 -solid 0 -shell 1 -face 36 -freewire 0 -freeedge 0 -sharededge 91
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.01035100426 -avg 0.003154065333]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 31 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 1 -face 36 -shape 217 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 1 -face 36 -freewire 0 -freeedge 0 -sharededge 91 -max_solid 0 -max_shell 1 -max_face 36 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.01020931331 -avg 0.003113738803 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename chauffage2.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 18 ( 18 ) Summary = 152 ( 152 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 18 ( 18 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 65 ( 65 )
-TOLERANCE : MaxTol = 0.05583299109 ( 0.1541333226 ) AvgTol = 0.01997256315 ( 0.03514969376 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 1 -face 18 -shape 152
+checkstatshape res_1 -solid 0 -shell 1 -face 18 -freewire 0 -freeedge 0 -sharededge 65
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.1541333226 -avg 0.03514969376]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 1 -face 18 -shape 152 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 1 -face 18 -freewire 0 -freeedge 0 -sharededge 65 -max_solid 0 -max_shell 1 -max_face 18 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.05583299109 -avg 0.01997256315 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename cpe1.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 2 ( 2 ) Summary = 2 ( 2 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 58 ( 58 ) Summary = 330 ( 330 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 58 ( 58 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 136 ( 136 )
-TOLERANCE : MaxTol = 0.09441003198 ( 0.1596118131 ) AvgTol = 0.03372607845 ( 0.0486709555 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 1 -face 58 -shape 330
+checkstatshape res_1 -solid 0 -shell 1 -face 58 -freewire 0 -freeedge 0 -sharededge 136
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.1596118131 -avg 0.0486709555]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 1 -face 58 -shape 330 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 1 -face 58 -freewire 0 -freeedge 0 -sharededge 136 -max_solid 0 -max_shell 1 -max_face 58 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.09441003198 -avg 0.03372607845 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
-
set filename ct_turbine-A.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 19 ( 5 ) Summary = 19 ( 5 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 40 ( 40 ) Face = 40 ( 40 ) Summary = 547 ( 527 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 40 ( 40 ) Face = 40 ( 40 ) FreeWire = 0 ( 0 ) FreeEdge = 20 ( 20 ) SharedEdge = 196 ( 196 )
-TOLERANCE : MaxTol = 0.02294330394 ( 0.02748335355 ) AvgTol = 0.00118366439 ( 0.001785361613 )
-LABELS : N0Labels = 3 ( 3 ) N1Labels = 84 ( 84 ) N2Labels = 0 ( 0 ) TotalLabels = 87 ( 87 ) NameLabels = 5 ( 5 ) ColorLabels = 82 ( 82 ) LayerLabels = 60 ( 60 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = WHITE ( WHITE )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 0 ( 0 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 6 -max_faults 0
+checkxstat D_First -n0 3 -n1 84 -n2 0 -total 87 -withname 5 -withcolor 82 -withlayer 60 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { 0 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 40 -face 40 -shape 527
+checkstatshape res_1 -solid 0 -shell 40 -face 40 -freewire 0 -freeedge 20 -sharededge 196
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.02748335355 -avg 0.001785361613]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 6 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 16 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3 -n1 84 -n2 0 -total 87 -withname 5 -withcolor 82 -withlayer 60 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 84 -n2 0 -total 87 -withname 5 -withcolor 82 -withlayer 60 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { 0 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 40 -face 40 -shape 547 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 40 -face 40 -freewire 0 -freeedge 20 -sharededge 196 -max_solid 0 -max_shell 40 -max_face 40 -max_freewire 0 -max_freeedge 20
+checkmaxtol res_2 -tol 0.02294330394 -avg 0.00118366439 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename dnc_63_025_ppv_a.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 115 ( 115 ) Summary = 737 ( 737 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 115 ( 115 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 294 ( 294 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1.000100003e-007 ) AvgTol = 1.000075787e-007 ( 1.000075787e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 115 -shape 737
+checkstatshape res_1 -solid 1 -shell 1 -face 115 -freewire 0 -freeedge 0 -sharededge 294
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-007 -avg 1.000075787e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 115 -shape 737 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 115 -freewire 0 -freeedge 0 -sharededge 294 -max_solid 1 -max_shell 1 -max_face 115 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.000075787e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename dnc_63_040_ppv_a.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 115 ( 115 ) Summary = 737 ( 737 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 115 ( 115 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 294 ( 294 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1.000100003e-007 ) AvgTol = 1.000075787e-007 ( 1.000075787e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 115 -shape 737
+checkstatshape res_1 -solid 1 -shell 1 -face 115 -freewire 0 -freeedge 0 -sharededge 294
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-007 -avg 1.000075787e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 115 -shape 737 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 115 -freewire 0 -freeedge 0 -sharededge 294 -max_solid 1 -max_shell 1 -max_face 115 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.000075787e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename dnc_63_050_ppv_a.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 115 ( 115 ) Summary = 737 ( 737 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 115 ( 115 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 294 ( 294 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1.000100003e-007 ) AvgTol = 1.000075787e-007 ( 1.000075787e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 115 -shape 737
+checkstatshape res_1 -solid 1 -shell 1 -face 115 -freewire 0 -freeedge 0 -sharededge 294
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-007 -avg 1.000075787e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 115 -shape 737 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 115 -freewire 0 -freeedge 0 -sharededge 294 -max_solid 1 -max_shell 1 -max_face 115 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.000075787e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename dnc_63_080_ppv_a.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 115 ( 115 ) Summary = 737 ( 737 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 115 ( 115 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 294 ( 294 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1.000100003e-007 ) AvgTol = 1.000075787e-007 ( 1.000075787e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 115 -shape 737
+checkstatshape res_1 -solid 1 -shell 1 -face 115 -freewire 0 -freeedge 0 -sharededge 294
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-007 -avg 1.000075787e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 115 -shape 737 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 115 -freewire 0 -freeedge 0 -sharededge 294 -max_solid 1 -max_shell 1 -max_face 115 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.000075787e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename dnc_63_100_ppv_a.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 115 ( 115 ) Summary = 737 ( 737 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 115 ( 115 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 294 ( 294 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1.000100003e-007 ) AvgTol = 1.000075787e-007 ( 1.000075787e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 115 -shape 737
+checkstatshape res_1 -solid 1 -shell 1 -face 115 -freewire 0 -freeedge 0 -sharededge 294
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-007 -avg 1.000075787e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 115 -shape 737 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 115 -freewire 0 -freeedge 0 -sharededge 294 -max_solid 1 -max_shell 1 -max_face 115 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.000075787e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename dnc_63_125_ppv_a.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 115 ( 115 ) Summary = 737 ( 737 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 115 ( 115 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 294 ( 294 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1.000100003e-007 ) AvgTol = 1.000075787e-007 ( 1.000075787e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 115 -shape 737
+checkstatshape res_1 -solid 1 -shell 1 -face 115 -freewire 0 -freeedge 0 -sharededge 294
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-007 -avg 1.000075787e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 115 -shape 737 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 115 -freewire 0 -freeedge 0 -sharededge 294 -max_solid 1 -max_shell 1 -max_face 115 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.000075787e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename dnc_63_160_ppv_a.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 115 ( 115 ) Summary = 737 ( 737 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 115 ( 115 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 294 ( 294 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1.000100003e-007 ) AvgTol = 1.000075787e-007 ( 1.000075787e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 115 -shape 737
+checkstatshape res_1 -solid 1 -shell 1 -face 115 -freewire 0 -freeedge 0 -sharededge 294
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-007 -avg 1.000075787e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 115 -shape 737 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 115 -freewire 0 -freeedge 0 -sharededge 294 -max_solid 1 -max_shell 1 -max_face 115 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.000075787e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename dnc_63_200_ppv_a.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 115 ( 115 ) Summary = 737 ( 737 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 115 ( 115 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 294 ( 294 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1.000100003e-007 ) AvgTol = 1.000075787e-007 ( 1.000075787e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 115 -shape 737
+checkstatshape res_1 -solid 1 -shell 1 -face 115 -freewire 0 -freeedge 0 -sharededge 294
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-007 -avg 1.000075787e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 115 -shape 737 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 115 -freewire 0 -freeedge 0 -sharededge 294 -max_solid 1 -max_shell 1 -max_face 115 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.000075787e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename dnc_63_250_ppv_a.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 115 ( 115 ) Summary = 737 ( 737 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 115 ( 115 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 294 ( 294 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1.000100003e-007 ) AvgTol = 1.000075787e-007 ( 1.000075787e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 115 -shape 737
+checkstatshape res_1 -solid 1 -shell 1 -face 115 -freewire 0 -freeedge 0 -sharededge 294
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-007 -avg 1.000075787e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 115 -shape 737 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 115 -freewire 0 -freeedge 0 -sharededge 294 -max_solid 1 -max_shell 1 -max_face 115 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.000075787e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename dnc_63_320_ppv_a.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 115 ( 115 ) Summary = 737 ( 737 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 115 ( 115 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 294 ( 294 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1.000100003e-007 ) AvgTol = 1.000075787e-007 ( 1.000075787e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 115 -shape 737
+checkstatshape res_1 -solid 1 -shell 1 -face 115 -freewire 0 -freeedge 0 -sharededge 294
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-007 -avg 1.000075787e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 115 -shape 737 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 115 -freewire 0 -freeedge 0 -sharededge 294 -max_solid 1 -max_shell 1 -max_face 115 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.000075787e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename dnc_63_400_ppv_a.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 115 ( 115 ) Summary = 737 ( 737 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 115 ( 115 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 294 ( 294 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1.000100003e-007 ) AvgTol = 1.000075787e-007 ( 1.000075787e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 115 -shape 737
+checkstatshape res_1 -solid 1 -shell 1 -face 115 -freewire 0 -freeedge 0 -sharededge 294
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-007 -avg 1.000075787e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 115 -shape 737 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 115 -freewire 0 -freeedge 0 -sharededge 294 -max_solid 1 -max_shell 1 -max_face 115 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.000075787e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename dnc_63_500_ppv_a.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 115 ( 115 ) Summary = 737 ( 737 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 115 ( 115 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 294 ( 294 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1.000100003e-007 ) AvgTol = 1.000075787e-007 ( 1.000075787e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 115 -shape 737
+checkstatshape res_1 -solid 1 -shell 1 -face 115 -freewire 0 -freeedge 0 -sharededge 294
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-007 -avg 1.000075787e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 115 -shape 737 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 115 -freewire 0 -freeedge 0 -sharededge 294 -max_solid 1 -max_shell 1 -max_face 115 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.000075787e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename ec_exhaust-A.stp
-set ref_data {
-DATA : Faulties = 0 ( 12 ) Warnings = 0 ( 0 ) Summary = 0 ( 12 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 4 ( 4 ) Shell = 4 ( 4 ) Face = 46 ( 46 ) Summary = 267 ( 267 )
-STATSHAPE : Solid = 4 ( 4 ) Shell = 4 ( 4 ) Face = 46 ( 46 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 100 ( 100 )
-TOLERANCE : MaxTol = 0.02183078369 ( 0.02190912769 ) AvgTol = 0.002096983915 ( 0.002169801448 )
-LABELS : N0Labels = 4 ( 4 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 4 ( 4 ) NameLabels = 4 ( 4 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 12
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 4 -n1 0 -n2 0 -total 4 -withname 4 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 4 -shell 4 -face 46 -shape 267
+checkstatshape res_1 -solid 4 -shell 4 -face 46 -freewire 0 -freeedge 0 -sharededge 100
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.02190912769 -avg 0.002169801448]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 12
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 4 -n1 0 -n2 0 -total 4 -withname 4 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 4 -n1 0 -n2 0 -total 4 -withname 4 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 4 -shell 4 -face 46 -shape 267 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 4 -shell 4 -face 46 -freewire 0 -freeedge 0 -sharededge 100 -max_solid 4 -max_shell 4 -max_face 46 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.02183078369 -avg 0.002096983915 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename f3.stp
-set ref_data {
-DATA : Faulties = 0 ( 2 ) Warnings = 0 ( 0 ) Summary = 0 ( 2 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 1 ( 1 ) Summary = 140 ( 140 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 1 ( 1 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 67 ( 67 )
-TOLERANCE : MaxTol = 9.838731639e-07 ( 2.031518087e-06 ) AvgTol = 2.18321254e-07 ( 3.43946687e-07 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 2
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 1 -face 1 -shape 140
+checkstatshape res_1 -solid 0 -shell 1 -face 1 -freewire 0 -freeedge 0 -sharededge 67
+set max_tol_res_1 [checkmaxtol res_1 -tol 2.031518087e-06 -avg 3.43946687e-07]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 2
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 1 -face 1 -shape 140 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 1 -face 1 -freewire 0 -freeedge 0 -sharededge 67 -max_solid 0 -max_shell 1 -max_face 1 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 9.838731639e-07 -avg 2.18321254e-07 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename f65.stp
-set ref_data {
-DATA : Faulties = 0 ( 2 ) Warnings = 0 ( 0 ) Summary = 0 ( 2 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 1 ( 1 ) Summary = 114 ( 114 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 1 ( 1 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 54 ( 54 )
-TOLERANCE : MaxTol = 1e-07 ( 1e-07 ) AvgTol = 1e-07 ( 1e-07 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 2
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 1 -face 1 -shape 114
+checkstatshape res_1 -solid 0 -shell 1 -face 1 -freewire 0 -freeedge 0 -sharededge 54
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-07 -avg 1e-07]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 2
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 1 -face 1 -shape 114 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 1 -face 1 -freewire 0 -freeedge 0 -sharededge 54 -max_solid 0 -max_shell 1 -max_face 1 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1e-07 -avg 1e-07 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename f920.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 1 ( 1 ) Summary = 44 ( 44 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 1 ( 1 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 21 ( 21 )
-TOLERANCE : MaxTol = 1.46067718e-007 ( 1.46067718e-007 ) AvgTol = 1.074516603e-007 ( 1.074516603e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 1 -face 1 -shape 44
+checkstatshape res_1 -solid 0 -shell 1 -face 1 -freewire 0 -freeedge 0 -sharededge 21
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.46067718e-007 -avg 1.074516603e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 1 -face 1 -shape 44 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 1 -face 1 -freewire 0 -freeedge 0 -sharededge 21 -max_solid 0 -max_shell 1 -max_face 1 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.46067718e-007 -avg 1.074516603e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename f921.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 1 ( 1 ) Summary = 44 ( 44 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 1 ( 1 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 21 ( 21 )
-TOLERANCE : MaxTol = 1.46067718e-007 ( 1.46067718e-007 ) AvgTol = 1.074516603e-007 ( 1.074516603e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 1 -face 1 -shape 44
+checkstatshape res_1 -solid 0 -shell 1 -face 1 -freewire 0 -freeedge 0 -sharededge 21
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.46067718e-007 -avg 1.074516603e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 1 -face 1 -shape 44 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 1 -face 1 -freewire 0 -freeedge 0 -sharededge 21 -max_solid 0 -max_shell 1 -max_face 1 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.46067718e-007 -avg 1.074516603e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
-
set filename id_turbine-A.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 21 ( 16 ) Summary = 21 ( 16 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 49 ( 49 ) Summary = 290 ( 290 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 49 ( 49 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 119 ( 119 )
-TOLERANCE : MaxTol = 0.003591433268 ( 0.006109109885 ) AvgTol = 0.0004792377666 ( 0.0008287050108 )
-LABELS : N0Labels = 3 ( 3 ) N1Labels = 87 ( 87 ) N2Labels = 0 ( 0 ) TotalLabels = 90 ( 90 ) NameLabels = 5 ( 5 ) ColorLabels = 86 ( 86 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 5 ( 5 )
-COLORS : Colors = DEEPSKYBLUE2 MAGENTA1 ORANGE ORANGERED RED ( DEEPSKYBLUE2 MAGENTA1 ORANGE ORANGERED RED )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 16 -max_faults 0
+checkxstat D_First -n0 3 -n1 87 -n2 0 -total 90 -withname 5 -withcolor 86 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { DEEPSKYBLUE2 MAGENTA1 ORANGE ORANGERED RED } -nbcolors 5 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 1 -face 49 -shape 290
+checkstatshape res_1 -solid 0 -shell 1 -face 49 -freewire 0 -freeedge 0 -sharededge 119
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.006109109885 -avg 0.0008287050108]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 16 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 15 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3 -n1 87 -n2 0 -total 90 -withname 5 -withcolor 86 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 5 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 87 -n2 0 -total 90 -withname 5 -withcolor 86 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { DEEPSKYBLUE2 MAGENTA1 ORANGE ORANGERED RED } -nbcolors 5 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 1 -face 49 -shape 290 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 1 -face 49 -freewire 0 -freeedge 0 -sharededge 119 -max_solid 0 -max_shell 1 -max_face 49 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.003591433268 -avg 0.0004792377666 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
-
set filename id_turbine-B.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 11 ( 8 ) Summary = 11 ( 8 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 49 ( 49 ) Summary = 290 ( 290 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 49 ( 49 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 119 ( 119 )
-TOLERANCE : MaxTol = 0.003591433268 ( 0.006109109885 ) AvgTol = 0.000572321951 ( 0.001285201537 )
-LABELS : N0Labels = 3 ( 3 ) N1Labels = 87 ( 87 ) N2Labels = 0 ( 0 ) TotalLabels = 90 ( 90 ) NameLabels = 5 ( 5 ) ColorLabels = 86 ( 86 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 5 ( 5 )
-COLORS : Colors = DEEPSKYBLUE2 MAGENTA1 ORANGE ORANGERED RED ( DEEPSKYBLUE2 MAGENTA1 ORANGE ORANGERED RED )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 8 -max_faults 0
+checkxstat D_First -n0 3 -n1 87 -n2 0 -total 90 -withname 5 -withcolor 86 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { DEEPSKYBLUE2 MAGENTA1 ORANGE ORANGERED RED } -nbcolors 5 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 1 -face 49 -shape 290
+checkstatshape res_1 -solid 0 -shell 1 -face 49 -freewire 0 -freeedge 0 -sharededge 119
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.006109109885 -avg 0.001285201537]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 8 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 7 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3 -n1 87 -n2 0 -total 90 -withname 5 -withcolor 86 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 5 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 87 -n2 0 -total 90 -withname 5 -withcolor 86 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { DEEPSKYBLUE2 MAGENTA1 ORANGE ORANGERED RED } -nbcolors 5 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 1 -face 49 -shape 290 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 1 -face 49 -freewire 0 -freeedge 0 -sharededge 119 -max_solid 0 -max_shell 1 -max_face 49 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.003591433268 -avg 0.000572321951 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
-
set filename ie_exhaust-A.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 23 ( 16 ) Summary = 23 ( 16 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 64 ( 64 ) Summary = 378 ( 378 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 64 ( 64 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 150 ( 150 )
-TOLERANCE : MaxTol = 0.01644435227 ( 0.01670778143 ) AvgTol = 0.0005702798849 ( 0.0005790244062 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 16 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 64 -shape 378
+checkstatshape res_1 -solid 1 -shell 1 -face 64 -freewire 0 -freeedge 0 -sharededge 150
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.01670778143 -avg 0.0005790244062]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 16 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 16 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 64 -shape 378 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 64 -freewire 0 -freeedge 0 -sharededge 150 -max_solid 1 -max_shell 1 -max_face 64 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.01644435227 -avg 0.0005702798849 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename ie_exhaust-B.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 16 ( 16 ) Summary = 16 ( 16 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 64 ( 64 ) Summary = 378 ( 378 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 64 ( 64 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 150 ( 150 )
-TOLERANCE : MaxTol = 0.01574193348 ( 0.01692301518 ) AvgTol = 0.001069439088 ( 0.002489134762 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 16 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 64 -shape 378
+checkstatshape res_1 -solid 1 -shell 1 -face 64 -freewire 0 -freeedge 0 -sharededge 150
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.01692301518 -avg 0.002489134762]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 16 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 16 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 64 -shape 378 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 64 -freewire 0 -freeedge 0 -sharededge 150 -max_solid 1 -max_shell 1 -max_face 64 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.01574193348 -avg 0.001069439088 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename ie_exhaust-D.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 22 ( 22 ) Summary = 22 ( 22 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 64 ( 64 ) Summary = 378 ( 378 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 64 ( 64 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 150 ( 150 )
-TOLERANCE : MaxTol = 0.01574193348 ( 0.01692301518 ) AvgTol = 0.001069359917 ( 0.002489057452 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 22 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 64 -shape 378
+checkstatshape res_1 -solid 1 -shell 1 -face 64 -freewire 0 -freeedge 0 -sharededge 150
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.01692301518 -avg 0.002489057452]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 22 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 22 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 64 -shape 378 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 64 -freewire 0 -freeedge 0 -sharededge 150 -max_solid 1 -max_shell 1 -max_face 64 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.01574193348 -avg 0.001069359917 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
-
set filename manille.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 24 ( 0 ) Summary = 24 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 38 ( 38 ) Summary = 294 ( 294 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 38 ( 38 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 120 ( 120 )
-TOLERANCE : MaxTol = 6.488976221e-006 ( 6.488964752e-006 ) AvgTol = 8.918120201e-007 ( 8.918103551e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 38 -shape 294
+checkstatshape res_1 -solid 1 -shell 1 -face 38 -freewire 0 -freeedge 0 -sharededge 120
+set max_tol_res_1 [checkmaxtol res_1 -tol 6.488964752e-006 -avg 8.918103551e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 24 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 38 -shape 294 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 38 -freewire 0 -freeedge 0 -sharededge 120 -max_solid 1 -max_shell 1 -max_face 38 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 6.488976221e-006 -avg 8.918120201e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename milieu.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 47 ( 47 ) Summary = 256 ( 256 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 47 ( 47 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 103 ( 103 )
-TOLERANCE : MaxTol = 0.09974634476 ( 0.1274438055 ) AvgTol = 0.03628304175 ( 0.04204360488 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 1 -face 47 -shape 256
+checkstatshape res_1 -solid 0 -shell 1 -face 47 -freewire 0 -freeedge 0 -sharededge 103
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.1274438055 -avg 0.04204360488]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 1 -face 47 -shape 256 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 1 -face 47 -freewire 0 -freeedge 0 -sharededge 103 -max_solid 0 -max_shell 1 -max_face 47 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.09974634476 -avg 0.03628304175 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename molregsit.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 40 ( 40 ) Summary = 228 ( 228 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 40 ( 40 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 94 ( 94 )
-TOLERANCE : MaxTol = 0.07606561967 ( 0.08109570981 ) AvgTol = 0.02793024988 ( 0.03094838969 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 1 -face 40 -shape 228
+checkstatshape res_1 -solid 0 -shell 1 -face 40 -freewire 0 -freeedge 0 -sharededge 94
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.08109570981 -avg 0.03094838969]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 1 -face 40 -shape 228 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 1 -face 40 -freewire 0 -freeedge 0 -sharededge 94 -max_solid 0 -max_shell 1 -max_face 40 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.07606561967 -avg 0.02793024988 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
-
set filename obtradio1.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 10 ( 4 ) Summary = 10 ( 4 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 52 ( 52 ) Summary = 338 ( 338 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 52 ( 52 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 144 ( 144 )
-TOLERANCE : MaxTol = 0.03986265272 ( 0.1567489095 ) AvgTol = 0.01346429968 ( 0.02937515411 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 1 -face 52 -shape 338
+checkstatshape res_1 -solid 0 -shell 1 -face 52 -freewire 0 -freeedge 0 -sharededge 144
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.1567489095 -avg 0.02937515411]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 10 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 1 -face 52 -shape 338 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 1 -face 52 -freewire 0 -freeedge 0 -sharededge 144 -max_solid 0 -max_shell 1 -max_face 52 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.03986265272 -avg 0.01346429968 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename pe_as1-A.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 5 ( 5 ) Shell = 5 ( 5 ) Face = 53 ( 53 ) Summary = 350 ( 350 )
-STATSHAPE : Solid = 18 ( 18 ) Shell = 18 ( 18 ) Face = 160 ( 160 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 126 ( 126 )
-TOLERANCE : MaxTol = 0.0001544499144 ( 0.0001544499144 ) AvgTol = 4.000129905e-005 ( 4.000130031e-005 )
-LABELS : N0Labels = 6 ( 6 ) N1Labels = 71 ( 71 ) N2Labels = 0 ( 0 ) TotalLabels = 77 ( 77 ) NameLabels = 24 ( 24 ) ColorLabels = 0 ( 0 ) LayerLabels = 53 ( 53 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 2 ( 2 )
-LAYERS : Layers = NUTS REST ( NUTS REST )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 6 -n1 71 -n2 0 -total 77 -withname 24 -withcolor 0 -withlayer 53 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { NUTS REST } -nblayers 2
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 5 -shell 5 -face 53 -shape 350
+checkstatshape res_1 -solid 18 -shell 18 -face 160 -freewire 0 -freeedge 0 -sharededge 126
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.0001544499144 -avg 4.000130031e-005]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 6 -n1 71 -n2 0 -total 77 -withname 24 -withcolor 0 -withlayer 53 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 2
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 6 -n1 71 -n2 0 -total 77 -withname 24 -withcolor 0 -withlayer 53 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { NUTS REST } -nblayers 2
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 5 -shell 5 -face 53 -shape 350 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 18 -shell 18 -face 160 -freewire 0 -freeedge 0 -sharededge 126 -max_solid 18 -max_shell 18 -max_face 160 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.0001544499144 -avg 4.000129905e-005 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename r121-ai.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 8 ( 8 ) Face = 8 ( 8 ) Summary = 101 ( 101 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 8 ( 8 ) Face = 8 ( 8 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 38 ( 38 )
-TOLERANCE : MaxTol = 0.0006114384785 ( 0.0006114384785 ) AvgTol = 5.122304628e-005 ( 5.122304629e-005 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 8 -face 8 -shape 101
+checkstatshape res_1 -solid 0 -shell 8 -face 8 -freewire 0 -freeedge 0 -sharededge 38
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.0006114384785 -avg 5.122304629e-005]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 8 -face 8 -shape 101 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 8 -face 8 -freewire 0 -freeedge 0 -sharededge 38 -max_solid 0 -max_shell 8 -max_face 8 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.0006114384785 -avg 5.122304628e-005 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename r_36-ct.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 10 ( 19 ) Summary = 10 ( 19 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 51 ( 51 ) Summary = 357 ( 357 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 51 ( 51 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 150 ( 150 )
-TOLERANCE : MaxTol = 0.00285495895 ( 0.00285495895 ) AvgTol = 0.0001172944179 ( 0.0001174630624 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 19 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 1 -face 51 -shape 357
+checkstatshape res_1 -solid 0 -shell 1 -face 51 -freewire 0 -freeedge 0 -sharededge 150
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.00285495895 -avg 0.0001174630624]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 19 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 10 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 1 -face 51 -shape 357 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 1 -face 51 -freewire 0 -freeedge 0 -sharededge 150 -max_solid 0 -max_shell 1 -max_face 51 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.00285495895 -avg 0.0001172944179 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename r_87-ug.stp
-set ref_data {
-DATA : Faulties = 0 ( 2 ) Warnings = 0 ( 0 ) Summary = 0 ( 2 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 10 ( 10 ) Face = 10 ( 10 ) Summary = 125 ( 123 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 10 ( 10 ) Face = 10 ( 10 ) FreeWire = 0 ( 0 ) FreeEdge = 2 ( 2 ) SharedEdge = 44 ( 44 )
-TOLERANCE : MaxTol = 0.018462436 ( 0.04645590147 ) AvgTol = 0.001814589339 ( 0.007120077124 )
-LABELS : N0Labels = 3 ( 3 ) N1Labels = 4 ( 4 ) N2Labels = 0 ( 0 ) TotalLabels = 7 ( 7 ) NameLabels = 5 ( 5 ) ColorLabels = 2 ( 2 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = FORESTGREEN ( FORESTGREEN )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 2
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 3 -n1 4 -n2 0 -total 7 -withname 5 -withcolor 2 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { FORESTGREEN } -nbcolors 1 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 10 -face 10 -shape 123
+checkstatshape res_1 -solid 0 -shell 10 -face 10 -freewire 0 -freeedge 2 -sharededge 44
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.04645590147 -avg 0.007120077124]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 2
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3 -n1 4 -n2 0 -total 7 -withname 5 -withcolor 2 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 4 -n2 0 -total 7 -withname 5 -withcolor 2 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { FORESTGREEN } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 10 -face 10 -shape 125 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 10 -face 10 -freewire 0 -freeedge 2 -sharededge 44 -max_solid 0 -max_shell 10 -max_face 10 -max_freewire 0 -max_freeedge 2
+checkmaxtol res_2 -tol 0.018462436 -avg 0.001814589339 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename sd_as1-A.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 8 ( 8 ) Shell = 8 ( 8 ) Face = 84 ( 84 ) Summary = 570 ( 570 )
-STATSHAPE : Solid = 18 ( 18 ) Shell = 18 ( 18 ) Face = 160 ( 160 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 206 ( 206 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1.000100003e-007 ) AvgTol = 1.000062094e-007 ( 1.000062094e-007 )
-LABELS : N0Labels = 14 ( 14 ) N1Labels = 19 ( 19 ) N2Labels = 0 ( 0 ) TotalLabels = 33 ( 33 ) NameLabels = 33 ( 33 ) ColorLabels = 8 ( 8 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 4 ( 4 )
-COLORS : Colors = BLUE1 GREEN MATRAGRAY RED ( BLUE1 GREEN MATRAGRAY RED )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 14 -n1 19 -n2 0 -total 33 -withname 33 -withcolor 8 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 GREEN MATRAGRAY RED } -nbcolors 4 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 8 -shell 8 -face 84 -shape 570
+checkstatshape res_1 -solid 18 -shell 18 -face 160 -freewire 0 -freeedge 0 -sharededge 206
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-007 -avg 1.000062094e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 14 -n1 19 -n2 0 -total 33 -withname 33 -withcolor 8 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 4 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 14 -n1 19 -n2 0 -total 33 -withname 33 -withcolor 8 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 GREEN MATRAGRAY RED } -nbcolors 4 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 8 -shell 8 -face 84 -shape 570 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 18 -shell 18 -face 160 -freewire 0 -freeedge 0 -sharededge 206 -max_solid 18 -max_shell 18 -max_face 160 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.000062094e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename stepBF3.stp
-set ref_data {
-DATA : Faulties = 0 ( 26 ) Warnings = 0 ( 0 ) Summary = 0 ( 26 )
-TPSTAT : Faulties = 0 ( 2 ) Warnings = 0 ( 0 ) Summary = 0 ( 2 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 0 ( 0 ) Summary = 1 ( 1 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 0 ( 0 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 0 ( 0 )
-TOLERANCE : MaxTol = 0 ( 0 ) AvgTol = 0 ( 0 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 26
+checkdoc "tpstat c" -max_warns 0 -max_faults 2
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 0 -shape 1
+checkstatshape res_1 -solid 0 -shell 0 -face 0 -freewire 0 -freeedge 0 -sharededge 0
+set max_tol_res_1 [checkmaxtol res_1 -tol 0 -avg 0]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 26
+checkdoc "tpstat c" -max_warns 0 -max_faults 2
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 0 -face 0 -shape 1 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 0 -freewire 0 -freeedge 0 -sharededge 0 -max_solid 0 -max_shell 0 -max_face 0 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0 -avg 0 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename t4_2.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 1 ) Summary = 0 ( 1 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 3 ( 3 ) Face = 13 ( 13 ) Summary = 122 ( 122 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 3 ( 3 ) Face = 13 ( 13 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 50 ( 50 )
-TOLERANCE : MaxTol = 0.0004295981946 ( 0.0007438758061 ) AvgTol = 0.0001554970892 ( 0.0002301289064 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 3 -face 13 -shape 122
+checkstatshape res_1 -solid 0 -shell 3 -face 13 -freewire 0 -freeedge 0 -sharededge 50
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.0007438758061 -avg 0.0002301289064]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 3 -face 13 -shape 122 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 3 -face 13 -freewire 0 -freeedge 0 -sharededge 50 -max_solid 0 -max_shell 3 -max_face 13 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.0004295981946 -avg 0.0001554970892 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
-
set filename t4mdb.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 9 ( 3 ) Summary = 9 ( 3 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 13 ( 13 ) Face = 13 ( 13 ) Summary = 271 ( 211 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 13 ( 13 ) Face = 13 ( 13 ) FreeWire = 0 ( 0 ) FreeEdge = 27 ( 27 ) SharedEdge = 86 ( 80 )
-TOLERANCE : MaxTol = 0.0001243142426 ( 0.0001243142426 ) AvgTol = 1.797021802e-005 ( 2.850679311e-005 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 96 ( 96 ) N2Labels = 0 ( 0 ) TotalLabels = 97 ( 97 ) NameLabels = 1 ( 1 ) ColorLabels = 12 ( 12 ) LayerLabels = 84 ( 84 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 9 ( 9 )
-COLORS : Colors = CYAN1 DODGERBLUE2 GRAY67 GREEN MAGENTA1 MAGENTA3 RED WHITE YELLOW ( CYAN1 DODGERBLUE2 GRAY67 GREEN MAGENTA1 MAGENTA3 RED WHITE YELLOW )
-NLAYERS : NLayers = 12 ( 12 )
-LAYERS : Layers = 0 10 20 40 41 42 43 44 45 47 48 49 ( 0 10 20 40 41 42 43 44 45 47 48 49 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 3 -max_faults 0
+checkxstat D_First -n0 1 -n1 96 -n2 0 -total 97 -withname 1 -withcolor 12 -withlayer 84 -centroid 0 -volume 0 -area 0 -colors { CYAN1 DODGERBLUE2 GRAY67 GREEN MAGENTA1 MAGENTA3 RED WHITE YELLOW } -nbcolors 9 -layers { 0 10 20 40 41 42 43 44 45 47 48 49 } -nblayers 12
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 13 -face 13 -shape 211
+checkstatshape res_1 -solid 0 -shell 13 -face 13 -freewire 0 -freeedge 27 -sharededge 80
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.0001243142426 -avg 2.850679311e-005]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 3 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 9 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 96 -n2 0 -total 97 -withname 1 -withcolor 12 -withlayer 84 -centroid 0 -volume 0 -area 0 -nbcolors 9 -nblayers 12
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 96 -n2 0 -total 97 -withname 1 -withcolor 12 -withlayer 84 -centroid 0 -volume 0 -area 0 -colors { CYAN1 DODGERBLUE2 GRAY67 GREEN MAGENTA1 MAGENTA3 RED WHITE YELLOW } -nbcolors 9 -layers { 0 10 20 40 41 42 43 44 45 47 48 49 } -nblayers 12
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 13 -face 13 -shape 271 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 13 -face 13 -freewire 0 -freeedge 27 -sharededge 86 -max_solid 0 -max_shell 13 -max_face 13 -max_freewire 0 -max_freeedge 27
+checkmaxtol res_2 -tol 0.0001243142426 -avg 1.797021802e-005 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename t4mec.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 12 ( 12 ) Face = 12 ( 12 ) Summary = 245 ( 245 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 12 ( 12 ) Face = 12 ( 12 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 103 ( 103 )
-TOLERANCE : MaxTol = 0.004636373856 ( 0.005314340756 ) AvgTol = 0.001546341911 ( 0.001821396818 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 12 -face 12 -shape 245
+checkstatshape res_1 -solid 0 -shell 12 -face 12 -freewire 0 -freeedge 0 -sharededge 103
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.005314340756 -avg 0.001821396818]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 12 -face 12 -shape 245 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 12 -face 12 -freewire 0 -freeedge 0 -sharededge 103 -max_solid 0 -max_shell 12 -max_face 12 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.004636373856 -avg 0.001546341911 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename t4mie.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 12 ( 12 ) Summary = 88 ( 88 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 12 ( 12 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 36 ( 36 )
-TOLERANCE : MaxTol = 0.005727511111 ( 0.005727511221 ) AvgTol = 0.00153863966 ( 0.001538639671 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 1 -face 12 -shape 88
+checkstatshape res_1 -solid 0 -shell 1 -face 12 -freewire 0 -freeedge 0 -sharededge 36
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.005727511221 -avg 0.001538639671]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 1 -face 12 -shape 88 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 1 -face 12 -freewire 0 -freeedge 0 -sharededge 36 -max_solid 0 -max_shell 1 -max_face 12 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.005727511111 -avg 0.00153863966 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename t4msd.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 1 ) Summary = 0 ( 1 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 7 ( 7 ) Summary = 61 ( 61 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 7 ( 7 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 25 ( 25 )
-TOLERANCE : MaxTol = 5.457611385e-007 ( 5.468279835e-007 ) AvgTol = 1.450502415e-007 ( 1.446043389e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 1 -face 7 -shape 61
+checkstatshape res_1 -solid 0 -shell 1 -face 7 -freewire 0 -freeedge 0 -sharededge 25
+set max_tol_res_1 [checkmaxtol res_1 -tol 5.468279835e-007 -avg 1.446043389e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 1 -face 7 -shape 61 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 1 -face 7 -freewire 0 -freeedge 0 -sharededge 25 -max_solid 0 -max_shell 1 -max_face 7 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 5.457611385e-007 -avg 1.450502415e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename tr10_r0901_ec.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 5 ( 5 ) Shell = 5 ( 5 ) Face = 53 ( 53 ) Summary = 353 ( 353 )
-STATSHAPE : Solid = 18 ( 18 ) Shell = 18 ( 18 ) Face = 160 ( 160 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 126 ( 126 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1.000100003e-007 ) AvgTol = 1.000062348e-007 ( 1.000062348e-007 )
-LABELS : N0Labels = 9 ( 9 ) N1Labels = 13 ( 13 ) N2Labels = 0 ( 0 ) TotalLabels = 22 ( 22 ) NameLabels = 22 ( 22 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 9 -n1 13 -n2 0 -total 22 -withname 22 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 5 -shell 5 -face 53 -shape 353
+checkstatshape res_1 -solid 18 -shell 18 -face 160 -freewire 0 -freeedge 0 -sharededge 126
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-007 -avg 1.000062348e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 9 -n1 13 -n2 0 -total 22 -withname 22 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 9 -n1 13 -n2 0 -total 22 -withname 22 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 5 -shell 5 -face 53 -shape 353 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 18 -shell 18 -face 160 -freewire 0 -freeedge 0 -sharededge 126 -max_solid 18 -max_shell 18 -max_face 160 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.000062348e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename tr8_as2_ac.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 28 ( 28 ) Summary = 28 ( 28 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 5 ( 5 ) Shell = 5 ( 5 ) Face = 53 ( 53 ) Summary = 353 ( 353 )
-STATSHAPE : Solid = 18 ( 18 ) Shell = 18 ( 18 ) Face = 160 ( 160 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 126 ( 126 )
-TOLERANCE : MaxTol = 1e-007 ( 1e-007 ) AvgTol = 1e-007 ( 1e-007 )
-LABELS : N0Labels = 9 ( 9 ) N1Labels = 13 ( 13 ) N2Labels = 0 ( 0 ) TotalLabels = 22 ( 22 ) NameLabels = 22 ( 22 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 28 -max_faults 0
+checkxstat D_First -n0 9 -n1 13 -n2 0 -total 22 -withname 22 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 5 -shell 5 -face 53 -shape 353
+checkstatshape res_1 -solid 18 -shell 18 -face 160 -freewire 0 -freeedge 0 -sharededge 126
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-007 -avg 1e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 28 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 28 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 9 -n1 13 -n2 0 -total 22 -withname 22 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 9 -n1 13 -n2 0 -total 22 -withname 22 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 5 -shell 5 -face 53 -shape 353 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 18 -shell 18 -face 160 -freewire 0 -freeedge 0 -sharededge 126 -max_solid 18 -max_shell 18 -max_face 160 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1e-007 -avg 1e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename tr8_as2_ct.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 13 ) Summary = 0 ( 13 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 5 ( 5 ) Shell = 5 ( 5 ) Face = 53 ( 53 ) Summary = 353 ( 353 )
-STATSHAPE : Solid = 18 ( 18 ) Shell = 18 ( 18 ) Face = 160 ( 160 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 126 ( 126 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1.000100003e-007 ) AvgTol = 1.000062348e-007 ( 1.000062348e-007 )
-LABELS : N0Labels = 9 ( 9 ) N1Labels = 13 ( 13 ) N2Labels = 0 ( 0 ) TotalLabels = 22 ( 22 ) NameLabels = 22 ( 22 ) ColorLabels = 5 ( 5 ) LayerLabels = 5 ( 5 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = WHITE ( WHITE )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 0 ( 0 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 9 -max_faults 0
+checkdoc "tpstat c" -max_warns 13 -max_faults 0
+checkxstat D_First -n0 9 -n1 13 -n2 0 -total 22 -withname 22 -withcolor 5 -withlayer 5 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { 0 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 5 -shell 5 -face 53 -shape 353
+checkstatshape res_1 -solid 18 -shell 18 -face 160 -freewire 0 -freeedge 0 -sharededge 126
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-007 -avg 1.000062348e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 9 -max_faults 0
+checkdoc "tpstat c" -max_warns 13 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 9 -n1 13 -n2 0 -total 22 -withname 22 -withcolor 5 -withlayer 5 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 9 -n1 13 -n2 0 -total 22 -withname 22 -withcolor 5 -withlayer 5 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { 0 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 5 -shell 5 -face 53 -shape 353 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 18 -shell 18 -face 160 -freewire 0 -freeedge 0 -sharededge 126 -max_solid 18 -max_shell 18 -max_face 160 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.000062348e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename tr8_as2_id.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 14 ( 14 ) Summary = 14 ( 14 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 5 ( 5 ) Shell = 5 ( 5 ) Face = 39 ( 39 ) Summary = 255 ( 255 )
-STATSHAPE : Solid = 18 ( 18 ) Shell = 18 ( 18 ) Face = 125 ( 125 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 84 ( 84 )
-TOLERANCE : MaxTol = 1e-007 ( 1e-007 ) AvgTol = 1e-007 ( 1e-007 )
-LABELS : N0Labels = 9 ( 9 ) N1Labels = 16 ( 16 ) N2Labels = 0 ( 0 ) TotalLabels = 25 ( 25 ) NameLabels = 22 ( 22 ) ColorLabels = 8 ( 8 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 3 ( 3 )
-COLORS : Colors = BLUE1 GREEN RED ( BLUE1 GREEN RED )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 14 -max_faults 0
+checkxstat D_First -n0 9 -n1 16 -n2 0 -total 25 -withname 22 -withcolor 8 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 GREEN RED } -nbcolors 3 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 5 -shell 5 -face 39 -shape 255
+checkstatshape res_1 -solid 18 -shell 18 -face 125 -freewire 0 -freeedge 0 -sharededge 84
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-007 -avg 1e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 14 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 14 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 9 -n1 16 -n2 0 -total 25 -withname 22 -withcolor 8 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 3 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 9 -n1 16 -n2 0 -total 25 -withname 22 -withcolor 8 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 GREEN RED } -nbcolors 3 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 5 -shell 5 -face 39 -shape 255 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 18 -shell 18 -face 125 -freewire 0 -freeedge 0 -sharededge 84 -max_solid 18 -max_shell 18 -max_face 125 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1e-007 -avg 1e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename tr9_r0201-pe-adjusted.stp
-set ref_data {
-DATA : Faulties = 0 ( 803 ) Warnings = 0 ( 0 ) Summary = 0 ( 803 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 35 ( 35 ) Summary = 223 ( 223 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 35 ( 35 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 82 ( 82 )
-TOLERANCE : MaxTol = 1.00005e-07 ( 1.00005e-07 ) AvgTol = 1.000033397e-07 ( 1.000033397e-07 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 803
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 35 -shape 223
+checkstatshape res_1 -solid 1 -shell 1 -face 35 -freewire 0 -freeedge 0 -sharededge 82
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.00005e-07 -avg 1.000033397e-07]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 803
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 35 -shape 223 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 35 -freewire 0 -freeedge 0 -sharededge 82 -max_solid 1 -max_shell 1 -max_face 35 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.00005e-07 -avg 1.000033397e-07 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj10_ap209-td.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 1 ( 1 ) Summary = 1 ( 1 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 29 ( 29 ) Summary = 196 ( 196 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 29 ( 29 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 79 ( 79 )
-TOLERANCE : MaxTol = 0.008505837499 ( 0.008990884097 ) AvgTol = 0.0006165797526 ( 0.000651503134 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 29 -shape 196
+checkstatshape res_1 -solid 1 -shell 1 -face 29 -freewire 0 -freeedge 0 -sharededge 79
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.008990884097 -avg 0.000651503134]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 29 -shape 196 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 29 -freewire 0 -freeedge 0 -sharededge 79 -max_solid 1 -max_shell 1 -max_face 29 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.008505837499 -avg 0.0006165797526 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj7_k1-ct-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 1 ) Summary = 0 ( 1 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 58 ( 58 ) Summary = 367 ( 367 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 58 ( 58 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 149 ( 149 )
-TOLERANCE : MaxTol = 0.0004768443614 ( 0.0004768443614 ) AvgTol = 6.422584066e-005 ( 6.422994218e-005 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = LIGHTSTEELBLUE1 ( LIGHTSTEELBLUE1 )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { LIGHTSTEELBLUE1 } -nbcolors 1 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 1 -face 58 -shape 367
+checkstatshape res_1 -solid 0 -shell 1 -face 58 -freewire 0 -freeedge 0 -sharededge 149
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.0004768443614 -avg 6.422994218e-005]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { LIGHTSTEELBLUE1 } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 1 -face 58 -shape 367 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 1 -face 58 -freewire 0 -freeedge 0 -sharededge 149 -max_solid 0 -max_shell 1 -max_face 58 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.0004768443614 -avg 6.422584066e-005 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj7_k1-sd-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 2 ( 2 ) Face = 57 ( 57 ) Summary = 362 ( 362 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 2 ( 2 ) Face = 57 ( 57 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 147 ( 147 )
-TOLERANCE : MaxTol = 4.531032216e-007 ( 4.53103015e-007 ) AvgTol = 1.19711272e-007 ( 1.197112699e-007 )
-LABELS : N0Labels = 2 ( 2 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 2 ( 2 ) NameLabels = 2 ( 2 ) ColorLabels = 2 ( 2 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = MEDIUMTURQUOISE ( MEDIUMTURQUOISE )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 2 -n1 0 -n2 0 -total 2 -withname 2 -withcolor 2 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { MEDIUMTURQUOISE } -nbcolors 1 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 2 -face 57 -shape 362
+checkstatshape res_1 -solid 0 -shell 2 -face 57 -freewire 0 -freeedge 0 -sharededge 147
+set max_tol_res_1 [checkmaxtol res_1 -tol 4.53103015e-007 -avg 1.197112699e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 2 -n1 0 -n2 0 -total 2 -withname 2 -withcolor 2 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 2 -n1 0 -n2 0 -total 2 -withname 2 -withcolor 2 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { MEDIUMTURQUOISE } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 2 -face 57 -shape 362 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 2 -face 57 -freewire 0 -freeedge 0 -sharededge 147 -max_solid 0 -max_shell 2 -max_face 57 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 4.531032216e-007 -avg 1.19711272e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj2_as1-ec-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 5 ( 5 ) Shell = 5 ( 5 ) Face = 53 ( 53 ) Summary = 353 ( 353 )
-STATSHAPE : Solid = 18 ( 18 ) Shell = 18 ( 18 ) Face = 160 ( 160 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 126 ( 126 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1.000100003e-007 ) AvgTol = 1.000062348e-007 ( 1.000062348e-007 )
-LABELS : N0Labels = 9 ( 9 ) N1Labels = 13 ( 13 ) N2Labels = 0 ( 0 ) TotalLabels = 22 ( 22 ) NameLabels = 22 ( 22 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 9 ( 9 ) Volume = 9 ( 9 ) Area = 9 ( 9 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 9 -n1 13 -n2 0 -total 22 -withname 22 -withcolor 0 -withlayer 0 -centroid 9 -volume 9 -area 9 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 5 -shell 5 -face 53 -shape 353
+checkstatshape res_1 -solid 18 -shell 18 -face 160 -freewire 0 -freeedge 0 -sharededge 126
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-007 -avg 1.000062348e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 9 -n1 13 -n2 0 -total 22 -withname 22 -withcolor 0 -withlayer 0 -centroid 9 -volume 9 -area 9 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 9 -n1 13 -n2 0 -total 22 -withname 22 -withcolor 0 -withlayer 0 -centroid 9 -volume 9 -area 9 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 5 -shell 5 -face 53 -shape 353 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 18 -shell 18 -face 160 -freewire 0 -freeedge 0 -sharededge 126 -max_solid 18 -max_shell 18 -max_face 160 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.000062348e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj2_as1-in-203.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 4 ( 4 ) Summary = 4 ( 4 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 5 ( 5 ) Shell = 5 ( 5 ) Face = 53 ( 53 ) Summary = 353 ( 353 )
-STATSHAPE : Solid = 18 ( 18 ) Shell = 18 ( 18 ) Face = 160 ( 160 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 126 ( 126 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1.000100003e-007 ) AvgTol = 1.000062348e-007 ( 1.000062348e-007 )
-LABELS : N0Labels = 9 ( 9 ) N1Labels = 13 ( 13 ) N2Labels = 0 ( 0 ) TotalLabels = 22 ( 22 ) NameLabels = 22 ( 22 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+checkxstat D_First -n0 9 -n1 13 -n2 0 -total 22 -withname 22 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 5 -shell 5 -face 53 -shape 353
+checkstatshape res_1 -solid 18 -shell 18 -face 160 -freewire 0 -freeedge 0 -sharededge 126
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-007 -avg 1.000062348e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 9 -n1 13 -n2 0 -total 22 -withname 22 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 9 -n1 13 -n2 0 -total 22 -withname 22 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 5 -shell 5 -face 53 -shape 353 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 18 -shell 18 -face 160 -freewire 0 -freeedge 0 -sharededge 126 -max_solid 18 -max_shell 18 -max_face 160 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.000062348e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj2_as1-pe-203.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 5 ( 5 ) Shell = 5 ( 5 ) Face = 53 ( 53 ) Summary = 350 ( 350 )
-STATSHAPE : Solid = 18 ( 18 ) Shell = 18 ( 18 ) Face = 160 ( 160 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 126 ( 126 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1.000100003e-007 ) AvgTol = 1.000062348e-007 ( 1.000062348e-007 )
-LABELS : N0Labels = 6 ( 6 ) N1Labels = 71 ( 71 ) N2Labels = 0 ( 0 ) TotalLabels = 77 ( 77 ) NameLabels = 24 ( 24 ) ColorLabels = 8 ( 8 ) LayerLabels = 53 ( 53 )
-PROPS : Centroid = 6 ( 6 ) Volume = 6 ( 6 ) Area = 6 ( 6 )
-NCOLORS : NColors = 3 ( 3 )
-COLORS : Colors = BLUE1 GREEN4 RED3 ( BLUE1 GREEN4 RED3 )
-NLAYERS : NLayers = 3 ( 3 )
-LAYERS : Layers = LAYER_1 LAYER_2 LAYER_3 ( LAYER_1 LAYER_2 LAYER_3 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 6 -n1 71 -n2 0 -total 77 -withname 24 -withcolor 8 -withlayer 53 -centroid 6 -volume 6 -area 6 -colors { BLUE1 GREEN4 RED3 } -nbcolors 3 -layers { LAYER_1 LAYER_2 LAYER_3 } -nblayers 3
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 5 -shell 5 -face 53 -shape 350
+checkstatshape res_1 -solid 18 -shell 18 -face 160 -freewire 0 -freeedge 0 -sharededge 126
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-007 -avg 1.000062348e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 6 -n1 71 -n2 0 -total 77 -withname 24 -withcolor 8 -withlayer 53 -centroid 6 -volume 6 -area 6 -nbcolors 3 -nblayers 3
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 6 -n1 71 -n2 0 -total 77 -withname 24 -withcolor 8 -withlayer 53 -centroid 6 -volume 6 -area 6 -colors { BLUE1 GREEN4 RED3 } -nbcolors 3 -layers { LAYER_1 LAYER_2 LAYER_3 } -nblayers 3
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 5 -shell 5 -face 53 -shape 350 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 18 -shell 18 -face 160 -freewire 0 -freeedge 0 -sharededge 126 -max_solid 18 -max_shell 18 -max_face 160 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.000062348e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj2_as1-tc-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 19 ) Summary = 0 ( 19 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 5 ( 5 ) Shell = 5 ( 5 ) Face = 53 ( 53 ) Summary = 353 ( 353 )
-STATSHAPE : Solid = 18 ( 18 ) Shell = 18 ( 18 ) Face = 160 ( 160 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 126 ( 126 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1.000100003e-007 ) AvgTol = 1.000062348e-007 ( 1.000062348e-007 )
-LABELS : N0Labels = 9 ( 9 ) N1Labels = 13 ( 13 ) N2Labels = 0 ( 0 ) TotalLabels = 22 ( 22 ) NameLabels = 22 ( 22 ) ColorLabels = 5 ( 5 ) LayerLabels = 5 ( 5 )
-PROPS : Centroid = 9 ( 9 ) Volume = 9 ( 9 ) Area = 9 ( 9 )
-NCOLORS : NColors = 5 ( 5 )
-COLORS : Colors = BLUE1 DARKORANGE GREEN RED YELLOW3 ( BLUE1 DARKORANGE GREEN RED YELLOW3 )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 000 ( 000 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 19 -max_faults 0
+checkxstat D_First -n0 9 -n1 13 -n2 0 -total 22 -withname 22 -withcolor 5 -withlayer 5 -centroid 9 -volume 9 -area 9 -colors { BLUE1 DARKORANGE GREEN RED YELLOW3 } -nbcolors 5 -layers { 000 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 5 -shell 5 -face 53 -shape 353
+checkstatshape res_1 -solid 18 -shell 18 -face 160 -freewire 0 -freeedge 0 -sharededge 126
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-007 -avg 1.000062348e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 19 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 9 -n1 13 -n2 0 -total 22 -withname 22 -withcolor 5 -withlayer 5 -centroid 9 -volume 9 -area 9 -nbcolors 5 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 9 -n1 13 -n2 0 -total 22 -withname 22 -withcolor 5 -withlayer 5 -centroid 9 -volume 9 -area 9 -colors { BLUE1 DARKORANGE GREEN RED YELLOW3 } -nbcolors 5 -layers { 000 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 5 -shell 5 -face 53 -shape 353 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 18 -shell 18 -face 160 -freewire 0 -freeedge 0 -sharededge 126 -max_solid 18 -max_shell 18 -max_face 160 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.000062348e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj2_as1-ug-203.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 14 ) Summary = 0 ( 14 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 5 ( 5 ) Shell = 5 ( 5 ) Face = 39 ( 39 ) Summary = 269 ( 269 )
-STATSHAPE : Solid = 18 ( 18 ) Shell = 18 ( 18 ) Face = 125 ( 125 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 91 ( 91 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1e-005 ) AvgTol = 1.00006917e-007 ( 2.879948407e-006 )
-LABELS : N0Labels = 9 ( 9 ) N1Labels = 13 ( 13 ) N2Labels = 0 ( 0 ) TotalLabels = 22 ( 22 ) NameLabels = 22 ( 22 ) ColorLabels = 5 ( 5 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 9 ( 9 ) Volume = 9 ( 9 ) Area = 9 ( 9 )
-NCOLORS : NColors = 3 ( 3 )
-COLORS : Colors = BLUE1 GREEN RED ( BLUE1 GREEN RED )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 14 -max_faults 0
+checkxstat D_First -n0 9 -n1 13 -n2 0 -total 22 -withname 22 -withcolor 5 -withlayer 0 -centroid 9 -volume 9 -area 9 -colors { BLUE1 GREEN RED } -nbcolors 3 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 5 -shell 5 -face 39 -shape 269
+checkstatshape res_1 -solid 18 -shell 18 -face 125 -freewire 0 -freeedge 0 -sharededge 91
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-005 -avg 2.879948407e-006]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 14 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 9 -n1 13 -n2 0 -total 22 -withname 22 -withcolor 5 -withlayer 0 -centroid 9 -volume 9 -area 9 -nbcolors 3 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 9 -n1 13 -n2 0 -total 22 -withname 22 -withcolor 5 -withlayer 0 -centroid 9 -volume 9 -area 9 -colors { BLUE1 GREEN RED } -nbcolors 3 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 5 -shell 5 -face 39 -shape 269 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 18 -shell 18 -face 125 -freewire 0 -freeedge 0 -sharededge 91 -max_solid 18 -max_shell 18 -max_face 125 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.00006917e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj2_io1-ca-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 29 ( 29 ) Summary = 193 ( 193 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 29 ( 29 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 70 ( 70 )
-TOLERANCE : MaxTol = 1e-007 ( 1e-007 ) AvgTol = 1e-007 ( 1e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 99 ( 99 ) N2Labels = 0 ( 0 ) TotalLabels = 100 ( 100 ) NameLabels = 1 ( 1 ) ColorLabels = 99 ( 99 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 1 ( 1 ) Volume = 1 ( 1 ) Area = 1 ( 1 )
-NCOLORS : NColors = 3 ( 3 )
-COLORS : Colors = BLUE1 RED YELLOW ( BLUE1 RED YELLOW )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 99 -n2 0 -total 100 -withname 1 -withcolor 99 -withlayer 0 -centroid 1 -volume 1 -area 1 -colors { BLUE1 RED YELLOW } -nbcolors 3 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 29 -shape 193
+checkstatshape res_1 -solid 1 -shell 1 -face 29 -freewire 0 -freeedge 0 -sharededge 70
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-007 -avg 1e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 99 -n2 0 -total 100 -withname 1 -withcolor 99 -withlayer 0 -centroid 1 -volume 1 -area 1 -nbcolors 3 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 99 -n2 0 -total 100 -withname 1 -withcolor 99 -withlayer 0 -centroid 1 -volume 1 -area 1 -colors { BLUE1 RED YELLOW } -nbcolors 3 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 29 -shape 193 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 29 -freewire 0 -freeedge 0 -sharededge 70 -max_solid 1 -max_shell 1 -max_face 29 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1e-007 -avg 1e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj3_as1-ec-203.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 5 ( 5 ) Shell = 5 ( 5 ) Face = 53 ( 53 ) Summary = 353 ( 353 )
-STATSHAPE : Solid = 18 ( 18 ) Shell = 18 ( 18 ) Face = 160 ( 160 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 126 ( 126 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1.000100003e-007 ) AvgTol = 1.000062348e-007 ( 1.000062348e-007 )
-LABELS : N0Labels = 9 ( 9 ) N1Labels = 13 ( 13 ) N2Labels = 0 ( 0 ) TotalLabels = 22 ( 22 ) NameLabels = 22 ( 22 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 9 ( 9 ) Volume = 9 ( 9 ) Area = 9 ( 9 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 9 -n1 13 -n2 0 -total 22 -withname 22 -withcolor 0 -withlayer 0 -centroid 9 -volume 9 -area 9 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 5 -shell 5 -face 53 -shape 353
+checkstatshape res_1 -solid 18 -shell 18 -face 160 -freewire 0 -freeedge 0 -sharededge 126
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-007 -avg 1.000062348e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 9 -n1 13 -n2 0 -total 22 -withname 22 -withcolor 0 -withlayer 0 -centroid 9 -volume 9 -area 9 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 9 -n1 13 -n2 0 -total 22 -withname 22 -withcolor 0 -withlayer 0 -centroid 9 -volume 9 -area 9 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 5 -shell 5 -face 53 -shape 353 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 18 -shell 18 -face 160 -freewire 0 -freeedge 0 -sharededge 126 -max_solid 18 -max_shell 18 -max_face 160 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.000062348e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj3_as1-ec-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 5 ( 5 ) Shell = 5 ( 5 ) Face = 53 ( 53 ) Summary = 353 ( 353 )
-STATSHAPE : Solid = 18 ( 18 ) Shell = 18 ( 18 ) Face = 160 ( 160 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 126 ( 126 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1.000100003e-007 ) AvgTol = 1.000062348e-007 ( 1.000062348e-007 )
-LABELS : N0Labels = 9 ( 9 ) N1Labels = 13 ( 13 ) N2Labels = 0 ( 0 ) TotalLabels = 22 ( 22 ) NameLabels = 22 ( 22 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 9 ( 9 ) Volume = 9 ( 9 ) Area = 9 ( 9 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 9 -n1 13 -n2 0 -total 22 -withname 22 -withcolor 0 -withlayer 0 -centroid 9 -volume 9 -area 9 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 5 -shell 5 -face 53 -shape 353
+checkstatshape res_1 -solid 18 -shell 18 -face 160 -freewire 0 -freeedge 0 -sharededge 126
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-007 -avg 1.000062348e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 9 -n1 13 -n2 0 -total 22 -withname 22 -withcolor 0 -withlayer 0 -centroid 9 -volume 9 -area 9 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 9 -n1 13 -n2 0 -total 22 -withname 22 -withcolor 0 -withlayer 0 -centroid 9 -volume 9 -area 9 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 5 -shell 5 -face 53 -shape 353 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 18 -shell 18 -face 160 -freewire 0 -freeedge 0 -sharededge 126 -max_solid 18 -max_shell 18 -max_face 160 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.000062348e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj3_as1-pe-203.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 5 ( 5 ) Shell = 5 ( 5 ) Face = 53 ( 53 ) Summary = 353 ( 353 )
-STATSHAPE : Solid = 18 ( 18 ) Shell = 18 ( 18 ) Face = 160 ( 160 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 126 ( 126 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1.000100003e-007 ) AvgTol = 1.000062348e-007 ( 1.000062348e-007 )
-LABELS : N0Labels = 9 ( 9 ) N1Labels = 16 ( 16 ) N2Labels = 0 ( 0 ) TotalLabels = 25 ( 25 ) NameLabels = 22 ( 22 ) ColorLabels = 8 ( 8 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 9 ( 9 ) Volume = 9 ( 9 ) Area = 9 ( 9 )
-NCOLORS : NColors = 3 ( 3 )
-COLORS : Colors = BLUE1 GREEN4 RED3 ( BLUE1 GREEN4 RED3 )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 9 -n1 16 -n2 0 -total 25 -withname 22 -withcolor 8 -withlayer 0 -centroid 9 -volume 9 -area 9 -colors { BLUE1 GREEN4 RED3 } -nbcolors 3 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 5 -shell 5 -face 53 -shape 353
+checkstatshape res_1 -solid 18 -shell 18 -face 160 -freewire 0 -freeedge 0 -sharededge 126
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-007 -avg 1.000062348e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 9 -n1 16 -n2 0 -total 25 -withname 22 -withcolor 8 -withlayer 0 -centroid 9 -volume 9 -area 9 -nbcolors 3 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 9 -n1 16 -n2 0 -total 25 -withname 22 -withcolor 8 -withlayer 0 -centroid 9 -volume 9 -area 9 -colors { BLUE1 GREEN4 RED3 } -nbcolors 3 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 5 -shell 5 -face 53 -shape 353 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 18 -shell 18 -face 160 -freewire 0 -freeedge 0 -sharededge 126 -max_solid 18 -max_shell 18 -max_face 160 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.000062348e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj3_as1-tc-203.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 19 ) Summary = 0 ( 19 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 5 ( 5 ) Shell = 5 ( 5 ) Face = 53 ( 53 ) Summary = 353 ( 353 )
-STATSHAPE : Solid = 18 ( 18 ) Shell = 18 ( 18 ) Face = 160 ( 160 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 126 ( 126 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1.000100003e-007 ) AvgTol = 1.000062348e-007 ( 1.000062348e-007 )
-LABELS : N0Labels = 9 ( 9 ) N1Labels = 13 ( 13 ) N2Labels = 0 ( 0 ) TotalLabels = 22 ( 22 ) NameLabels = 22 ( 22 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 9 ( 9 ) Volume = 9 ( 9 ) Area = 9 ( 9 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 19 -max_faults 0
+checkxstat D_First -n0 9 -n1 13 -n2 0 -total 22 -withname 22 -withcolor 0 -withlayer 0 -centroid 9 -volume 9 -area 9 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 5 -shell 5 -face 53 -shape 353
+checkstatshape res_1 -solid 18 -shell 18 -face 160 -freewire 0 -freeedge 0 -sharededge 126
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-007 -avg 1.000062348e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 19 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 9 -n1 13 -n2 0 -total 22 -withname 22 -withcolor 0 -withlayer 0 -centroid 9 -volume 9 -area 9 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 9 -n1 13 -n2 0 -total 22 -withname 22 -withcolor 0 -withlayer 0 -centroid 9 -volume 9 -area 9 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 5 -shell 5 -face 53 -shape 353 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 18 -shell 18 -face 160 -freewire 0 -freeedge 0 -sharededge 126 -max_solid 18 -max_shell 18 -max_face 160 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.000062348e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj3_as1-tc-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 19 ) Summary = 0 ( 19 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 5 ( 5 ) Shell = 5 ( 5 ) Face = 53 ( 53 ) Summary = 353 ( 353 )
-STATSHAPE : Solid = 18 ( 18 ) Shell = 18 ( 18 ) Face = 160 ( 160 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 126 ( 126 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1.000100003e-007 ) AvgTol = 1.000062348e-007 ( 1.000062348e-007 )
-LABELS : N0Labels = 9 ( 9 ) N1Labels = 13 ( 13 ) N2Labels = 0 ( 0 ) TotalLabels = 22 ( 22 ) NameLabels = 22 ( 22 ) ColorLabels = 5 ( 5 ) LayerLabels = 5 ( 5 )
-PROPS : Centroid = 9 ( 9 ) Volume = 9 ( 9 ) Area = 9 ( 9 )
-NCOLORS : NColors = 5 ( 5 )
-COLORS : Colors = BLUE1 DARKORANGE GREEN RED YELLOW3 ( BLUE1 DARKORANGE GREEN RED YELLOW3 )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 000 ( 000 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 19 -max_faults 0
+checkxstat D_First -n0 9 -n1 13 -n2 0 -total 22 -withname 22 -withcolor 5 -withlayer 5 -centroid 9 -volume 9 -area 9 -colors { BLUE1 DARKORANGE GREEN RED YELLOW3 } -nbcolors 5 -layers { 000 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 5 -shell 5 -face 53 -shape 353
+checkstatshape res_1 -solid 18 -shell 18 -face 160 -freewire 0 -freeedge 0 -sharededge 126
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-007 -avg 1.000062348e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 19 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 9 -n1 13 -n2 0 -total 22 -withname 22 -withcolor 5 -withlayer 5 -centroid 9 -volume 9 -area 9 -nbcolors 5 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 9 -n1 13 -n2 0 -total 22 -withname 22 -withcolor 5 -withlayer 5 -centroid 9 -volume 9 -area 9 -colors { BLUE1 DARKORANGE GREEN RED YELLOW3 } -nbcolors 5 -layers { 000 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 5 -shell 5 -face 53 -shape 353 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 18 -shell 18 -face 160 -freewire 0 -freeedge 0 -sharededge 126 -max_solid 18 -max_shell 18 -max_face 160 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.000062348e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj3_s1-ac-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 21 ) Warnings = 0 ( 0 ) Summary = 0 ( 21 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 4 ( 4 ) Summary = 4 ( 4 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 8 ( 8 ) Shell = 8 ( 8 ) Face = 100 ( 100 ) Summary = 647 ( 647 )
-STATSHAPE : Solid = 11 ( 11 ) Shell = 11 ( 11 ) Face = 138 ( 138 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 252 ( 252 )
-TOLERANCE : MaxTol = 0.01954022272 ( 0.01954022263 ) AvgTol = 0.0005199551327 ( 0.0005199551309 )
-LABELS : N0Labels = 13 ( 13 ) N1Labels = 14 ( 14 ) N2Labels = 0 ( 0 ) TotalLabels = 27 ( 27 ) NameLabels = 27 ( 27 ) ColorLabels = 8 ( 8 ) LayerLabels = 8 ( 8 )
-PROPS : Centroid = 13 ( 13 ) Volume = 13 ( 13 ) Area = 13 ( 13 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = YELLOW ( YELLOW )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 0 ( 0 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 21
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+checkxstat D_First -n0 13 -n1 14 -n2 0 -total 27 -withname 27 -withcolor 8 -withlayer 8 -centroid 13 -volume 13 -area 13 -colors { YELLOW } -nbcolors 1 -layers { 0 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 8 -shell 8 -face 100 -shape 647
+checkstatshape res_1 -solid 11 -shell 11 -face 138 -freewire 0 -freeedge 0 -sharededge 252
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.01954022263 -avg 0.0005199551309]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 21
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 13 -n1 14 -n2 0 -total 27 -withname 27 -withcolor 8 -withlayer 8 -centroid 13 -volume 13 -area 13 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 13 -n1 14 -n2 0 -total 27 -withname 27 -withcolor 8 -withlayer 8 -centroid 13 -volume 13 -area 13 -colors { YELLOW } -nbcolors 1 -layers { 0 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 8 -shell 8 -face 100 -shape 647 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 11 -shell 11 -face 138 -freewire 0 -freeedge 0 -sharededge 252 -max_solid 11 -max_shell 11 -max_face 138 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.01954022272 -avg 0.0005199551327 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
-
set filename trj3_s1-ct-203.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 20 ( 18 ) Summary = 20 ( 18 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 8 ( 8 ) Shell = 8 ( 8 ) Face = 132 ( 132 ) Summary = 801 ( 801 )
-STATSHAPE : Solid = 11 ( 11 ) Shell = 11 ( 11 ) Face = 178 ( 178 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 316 ( 316 )
-TOLERANCE : MaxTol = 0.06901335768 ( 0.07236095994 ) AvgTol = 0.0008239378267 ( 0.0008694243708 )
-LABELS : N0Labels = 13 ( 13 ) N1Labels = 21 ( 21 ) N2Labels = 0 ( 0 ) TotalLabels = 34 ( 34 ) NameLabels = 27 ( 27 ) ColorLabels = 15 ( 15 ) LayerLabels = 8 ( 8 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 3 ( 3 )
-COLORS : Colors = BLUE1 RED YELLOW ( BLUE1 RED YELLOW )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 0 ( 0 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 18 -max_faults 0
+checkxstat D_First -n0 13 -n1 21 -n2 0 -total 34 -withname 27 -withcolor 15 -withlayer 8 -centroid 0 -volume 0 -area 0 -colors { BLUE1 RED YELLOW } -nbcolors 3 -layers { 0 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 8 -shell 8 -face 132 -shape 801
+checkstatshape res_1 -solid 11 -shell 11 -face 178 -freewire 0 -freeedge 0 -sharededge 316
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.07236095994 -avg 0.0008694243708]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 18 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 18 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 13 -n1 21 -n2 0 -total 34 -withname 27 -withcolor 15 -withlayer 8 -centroid 0 -volume 0 -area 0 -nbcolors 3 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 13 -n1 21 -n2 0 -total 34 -withname 27 -withcolor 15 -withlayer 8 -centroid 0 -volume 0 -area 0 -colors { BLUE1 RED YELLOW } -nbcolors 3 -layers { 0 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 8 -shell 8 -face 132 -shape 801 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 11 -shell 11 -face 178 -freewire 0 -freeedge 0 -sharededge 316 -max_solid 11 -max_shell 11 -max_face 178 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.06901335768 -avg 0.0008239378267 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
-
set filename trj3_s1-ct-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 20 ( 18 ) Summary = 20 ( 18 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 8 ( 8 ) Shell = 8 ( 8 ) Face = 132 ( 132 ) Summary = 801 ( 801 )
-STATSHAPE : Solid = 11 ( 11 ) Shell = 11 ( 11 ) Face = 178 ( 178 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 316 ( 316 )
-TOLERANCE : MaxTol = 0.06901335768 ( 0.07236095994 ) AvgTol = 0.0008239378267 ( 0.0008694243708 )
-LABELS : N0Labels = 13 ( 13 ) N1Labels = 21 ( 21 ) N2Labels = 0 ( 0 ) TotalLabels = 34 ( 34 ) NameLabels = 27 ( 27 ) ColorLabels = 15 ( 15 ) LayerLabels = 8 ( 8 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 3 ( 3 )
-COLORS : Colors = BLUE1 RED YELLOW ( BLUE1 RED YELLOW )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 0 ( 0 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 13 -max_faults 0
+checkdoc "tpstat c" -max_warns 18 -max_faults 0
+checkxstat D_First -n0 13 -n1 21 -n2 0 -total 34 -withname 27 -withcolor 15 -withlayer 8 -centroid 0 -volume 0 -area 0 -colors { BLUE1 RED YELLOW } -nbcolors 3 -layers { 0 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 8 -shell 8 -face 132 -shape 801
+checkstatshape res_1 -solid 11 -shell 11 -face 178 -freewire 0 -freeedge 0 -sharededge 316
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.07236095994 -avg 0.0008694243708]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 13 -max_faults 0
+checkdoc "tpstat c" -max_warns 18 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 18 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 13 -n1 21 -n2 0 -total 34 -withname 27 -withcolor 15 -withlayer 8 -centroid 0 -volume 0 -area 0 -nbcolors 3 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 13 -n1 21 -n2 0 -total 34 -withname 27 -withcolor 15 -withlayer 8 -centroid 0 -volume 0 -area 0 -colors { BLUE1 RED YELLOW } -nbcolors 3 -layers { 0 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 8 -shell 8 -face 132 -shape 801 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 11 -shell 11 -face 178 -freewire 0 -freeedge 0 -sharededge 316 -max_solid 11 -max_shell 11 -max_face 178 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.06901335768 -avg 0.0008239378267 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
-
set filename trj3_s1-ec-203.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 3 ( 2 ) Summary = 3 ( 2 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 8 ( 8 ) Shell = 8 ( 8 ) Face = 90 ( 90 ) Summary = 524 ( 524 )
-STATSHAPE : Solid = 11 ( 11 ) Shell = 11 ( 11 ) Face = 121 ( 121 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 187 ( 187 )
-TOLERANCE : MaxTol = 2.374473352e-006 ( 2.374497097e-006 ) AvgTol = 1.581194476e-007 ( 1.614739074e-007 )
-LABELS : N0Labels = 14 ( 14 ) N1Labels = 19 ( 19 ) N2Labels = 0 ( 0 ) TotalLabels = 33 ( 33 ) NameLabels = 30 ( 30 ) ColorLabels = 11 ( 11 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 3 ( 3 )
-COLORS : Colors = BLUE1 RED YELLOW ( BLUE1 RED YELLOW )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+checkxstat D_First -n0 14 -n1 19 -n2 0 -total 33 -withname 30 -withcolor 11 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 RED YELLOW } -nbcolors 3 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 8 -shell 8 -face 90 -shape 524
+checkstatshape res_1 -solid 11 -shell 11 -face 121 -freewire 0 -freeedge 0 -sharededge 187
+set max_tol_res_1 [checkmaxtol res_1 -tol 2.374497097e-006 -avg 1.614739074e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 3 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 14 -n1 19 -n2 0 -total 33 -withname 30 -withcolor 11 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 3 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 14 -n1 19 -n2 0 -total 33 -withname 30 -withcolor 11 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 RED YELLOW } -nbcolors 3 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 8 -shell 8 -face 90 -shape 524 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 11 -shell 11 -face 121 -freewire 0 -freeedge 0 -sharededge 187 -max_solid 11 -max_shell 11 -max_face 121 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 2.374473352e-006 -avg 1.581194476e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
-
set filename trj3_s1-ec-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 3 ( 2 ) Summary = 3 ( 2 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 8 ( 8 ) Shell = 8 ( 8 ) Face = 90 ( 90 ) Summary = 524 ( 524 )
-STATSHAPE : Solid = 11 ( 11 ) Shell = 11 ( 11 ) Face = 121 ( 121 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 187 ( 187 )
-TOLERANCE : MaxTol = 2.374473352e-006 ( 2.374497097e-006 ) AvgTol = 1.581194476e-007 ( 1.614739074e-007 )
-LABELS : N0Labels = 14 ( 14 ) N1Labels = 19 ( 19 ) N2Labels = 0 ( 0 ) TotalLabels = 33 ( 33 ) NameLabels = 30 ( 30 ) ColorLabels = 11 ( 11 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 3 ( 3 )
-COLORS : Colors = BLUE1 RED YELLOW ( BLUE1 RED YELLOW )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+checkxstat D_First -n0 14 -n1 19 -n2 0 -total 33 -withname 30 -withcolor 11 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 RED YELLOW } -nbcolors 3 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 8 -shell 8 -face 90 -shape 524
+checkstatshape res_1 -solid 11 -shell 11 -face 121 -freewire 0 -freeedge 0 -sharededge 187
+set max_tol_res_1 [checkmaxtol res_1 -tol 2.374497097e-006 -avg 1.614739074e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 3 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 14 -n1 19 -n2 0 -total 33 -withname 30 -withcolor 11 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 3 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 14 -n1 19 -n2 0 -total 33 -withname 30 -withcolor 11 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 RED YELLOW } -nbcolors 3 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 8 -shell 8 -face 90 -shape 524 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 11 -shell 11 -face 121 -freewire 0 -freeedge 0 -sharededge 187 -max_solid 11 -max_shell 11 -max_face 121 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 2.374473352e-006 -avg 1.581194476e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj3_s1-md-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 8 ( 39 ) Summary = 8 ( 39 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 9 ( 9 ) Shell = 9 ( 9 ) Face = 116 ( 116 ) Summary = 709 ( 709 )
-STATSHAPE : Solid = 11 ( 11 ) Shell = 11 ( 11 ) Face = 130 ( 130 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 266 ( 266 )
-TOLERANCE : MaxTol = 0.0009770882201 ( 0.08941639094 ) AvgTol = 2.388263334e-005 ( 0.0007912875694 )
-LABELS : N0Labels = 14 ( 14 ) N1Labels = 14 ( 14 ) N2Labels = 0 ( 0 ) TotalLabels = 28 ( 28 ) NameLabels = 28 ( 28 ) ColorLabels = 9 ( 9 ) LayerLabels = 9 ( 9 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 7 ( 7 )
-COLORS : Colors = CYAN1 DARKORANGE1 DARKORANGE3 GREEN MAGENTA1 RED YELLOW ( CYAN1 DARKORANGE1 DARKORANGE3 GREEN MAGENTA1 RED YELLOW )
-NLAYERS : NLayers = 4 ( 4 )
-LAYERS : Layers = 1 110 28263 5 ( 1 110 28263 5 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 39 -max_faults 0
+checkxstat D_First -n0 14 -n1 14 -n2 0 -total 28 -withname 28 -withcolor 9 -withlayer 9 -centroid 0 -volume 0 -area 0 -colors { CYAN1 DARKORANGE1 DARKORANGE3 GREEN MAGENTA1 RED YELLOW } -nbcolors 7 -layers { 1 110 28263 5 } -nblayers 4
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 9 -shell 9 -face 116 -shape 709
+checkstatshape res_1 -solid 11 -shell 11 -face 130 -freewire 0 -freeedge 0 -sharededge 266
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.08941639094 -avg 0.0007912875694]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 39 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 8 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 14 -n1 14 -n2 0 -total 28 -withname 28 -withcolor 9 -withlayer 9 -centroid 0 -volume 0 -area 0 -nbcolors 7 -nblayers 4
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 14 -n1 14 -n2 0 -total 28 -withname 28 -withcolor 9 -withlayer 9 -centroid 0 -volume 0 -area 0 -colors { CYAN1 DARKORANGE1 DARKORANGE3 GREEN MAGENTA1 RED YELLOW } -nbcolors 7 -layers { 1 110 28263 5 } -nblayers 4
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 9 -shell 9 -face 116 -shape 709 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 11 -shell 11 -face 130 -freewire 0 -freeedge 0 -sharededge 266 -max_solid 11 -max_shell 11 -max_face 130 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.0009770882201 -avg 2.388263334e-005 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
-
set filename trj3_s1-pe-203.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 2 ( 0 ) Summary = 2 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 8 ( 8 ) Shell = 8 ( 8 ) Face = 146 ( 146 ) Summary = 869 ( 869 )
-STATSHAPE : Solid = 11 ( 11 ) Shell = 11 ( 11 ) Face = 188 ( 188 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 331 ( 331 )
-TOLERANCE : MaxTol = 0.0007596289751 ( 0.0007596289752 ) AvgTol = 1.028305667e-005 ( 1.028305667e-005 )
-LABELS : N0Labels = 13 ( 13 ) N1Labels = 17 ( 17 ) N2Labels = 0 ( 0 ) TotalLabels = 30 ( 30 ) NameLabels = 27 ( 27 ) ColorLabels = 11 ( 11 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 13 ( 13 ) Volume = 13 ( 13 ) Area = 13 ( 13 )
-NCOLORS : NColors = 3 ( 3 )
-COLORS : Colors = BLUE1 RED YELLOW ( BLUE1 RED YELLOW )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 13 -n1 17 -n2 0 -total 30 -withname 27 -withcolor 11 -withlayer 0 -centroid 13 -volume 13 -area 13 -colors { BLUE1 RED YELLOW } -nbcolors 3 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 8 -shell 8 -face 146 -shape 869
+checkstatshape res_1 -solid 11 -shell 11 -face 188 -freewire 0 -freeedge 0 -sharededge 331
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.0007596289752 -avg 1.028305667e-005]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 13 -n1 17 -n2 0 -total 30 -withname 27 -withcolor 11 -withlayer 0 -centroid 13 -volume 13 -area 13 -nbcolors 3 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 13 -n1 17 -n2 0 -total 30 -withname 27 -withcolor 11 -withlayer 0 -centroid 13 -volume 13 -area 13 -colors { BLUE1 RED YELLOW } -nbcolors 3 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 8 -shell 8 -face 146 -shape 869 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 11 -shell 11 -face 188 -freewire 0 -freeedge 0 -sharededge 331 -max_solid 11 -max_shell 11 -max_face 188 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.0007596289751 -avg 1.028305667e-005 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj3_s1-tc-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 7 ) Warnings = 0 ( 0 ) Summary = 0 ( 7 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 16 ( 21 ) Summary = 16 ( 21 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 8 ( 8 ) Shell = 8 ( 8 ) Face = 145 ( 145 ) Summary = 848 ( 848 )
-STATSHAPE : Solid = 11 ( 11 ) Shell = 11 ( 11 ) Face = 189 ( 189 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 332 ( 332 )
-TOLERANCE : MaxTol = 6.105713512e-05 ( 6.105713512e-05 ) AvgTol = 1.161749271e-06 ( 1.160147409e-06 )
-LABELS : N0Labels = 13 ( 13 ) N1Labels = 19 ( 19 ) N2Labels = 0 ( 0 ) TotalLabels = 32 ( 32 ) NameLabels = 27 ( 27 ) ColorLabels = 13 ( 13 ) LayerLabels = 8 ( 8 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 3 ( 3 )
-COLORS : Colors = BLUE1 RED YELLOW ( BLUE1 RED YELLOW )
-NLAYERS : NLayers = 8 ( 8 )
-LAYERS : Layers = 000 010 020 030 040 050 060 070 ( 000 010 020 030 040 050 060 070 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 7
+checkdoc "tpstat c" -max_warns 21 -max_faults 0
+checkxstat D_First -n0 13 -n1 19 -n2 0 -total 32 -withname 27 -withcolor 13 -withlayer 8 -centroid 0 -volume 0 -area 0 -colors { BLUE1 RED YELLOW } -nbcolors 3 -layers { 000 010 020 030 040 050 060 070 } -nblayers 8
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 8 -shell 8 -face 145 -shape 848
+checkstatshape res_1 -solid 11 -shell 11 -face 189 -freewire 0 -freeedge 0 -sharededge 332
+set max_tol_res_1 [checkmaxtol res_1 -tol 6.105713512e-05 -avg 1.160147409e-06]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 7
+checkdoc "tpstat c" -max_warns 21 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 16 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 13 -n1 19 -n2 0 -total 32 -withname 27 -withcolor 13 -withlayer 8 -centroid 0 -volume 0 -area 0 -nbcolors 3 -nblayers 8
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 13 -n1 19 -n2 0 -total 32 -withname 27 -withcolor 13 -withlayer 8 -centroid 0 -volume 0 -area 0 -colors { BLUE1 RED YELLOW } -nbcolors 3 -layers { 000 010 020 030 040 050 060 070 } -nblayers 8
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 8 -shell 8 -face 145 -shape 848 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 11 -shell 11 -face 189 -freewire 0 -freeedge 0 -sharededge 332 -max_solid 11 -max_shell 11 -max_face 189 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 6.105713512e-05 -avg 1.161749271e-06 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj3_s1-ug-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 6 ( 35 ) Summary = 6 ( 35 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 8 ( 8 ) Shell = 8 ( 8 ) Face = 105 ( 105 ) Summary = 628 ( 628 )
-STATSHAPE : Solid = 11 ( 11 ) Shell = 11 ( 11 ) Face = 138 ( 138 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 231 ( 231 )
-TOLERANCE : MaxTol = 0.002131642002 ( 0.002131642024 ) AvgTol = 3.774810572e-005 ( 4.007566294e-005 )
-LABELS : N0Labels = 13 ( 13 ) N1Labels = 15 ( 15 ) N2Labels = 0 ( 0 ) TotalLabels = 28 ( 28 ) NameLabels = 27 ( 27 ) ColorLabels = 9 ( 9 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = RED YELLOW ( RED YELLOW )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 35 -max_faults 0
+checkxstat D_First -n0 13 -n1 15 -n2 0 -total 28 -withname 27 -withcolor 9 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { RED YELLOW } -nbcolors 2 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 8 -shell 8 -face 105 -shape 628
+checkstatshape res_1 -solid 11 -shell 11 -face 138 -freewire 0 -freeedge 0 -sharededge 231
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.002131642024 -avg 4.007566294e-005]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 35 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 6 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 13 -n1 15 -n2 0 -total 28 -withname 27 -withcolor 9 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 2 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 13 -n1 15 -n2 0 -total 28 -withname 27 -withcolor 9 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { RED YELLOW } -nbcolors 2 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 8 -shell 8 -face 105 -shape 628 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 11 -shell 11 -face 138 -freewire 0 -freeedge 0 -sharededge 231 -max_solid 11 -max_shell 11 -max_face 138 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.002131642002 -avg 3.774810572e-005 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj4_k1_top-ct-203.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 1 ( 1 ) Summary = 1 ( 1 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 58 ( 58 ) Face = 58 ( 58 ) Summary = 771 ( 425 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 58 ( 58 ) Face = 58 ( 58 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 296 ( 149 )
-TOLERANCE : MaxTol = 0.0008167207419 ( 0.0009782609385 ) AvgTol = 5.463653037e-005 ( 0.000108302814 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 58 -face 58 -shape 425
+checkstatshape res_1 -solid 0 -shell 58 -face 58 -freewire 0 -freeedge 0 -sharededge 149
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.0009782609385 -avg 0.000108302814]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 58 -face 58 -shape 771 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 58 -face 58 -freewire 0 -freeedge 0 -sharededge 296 -max_solid 0 -max_shell 58 -max_face 58 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.0008167207419 -avg 5.463653037e-005 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj4_k1_top-id-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 15 ( 16 ) Summary = 15 ( 16 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 46 ( 46 ) Summary = 288 ( 288 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 46 ( 46 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 117 ( 117 )
-TOLERANCE : MaxTol = 0.01475036715 ( 0.01475021965 ) AvgTol = 0.0004055238368 ( 0.0004055209373 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 59 ( 59 ) N2Labels = 0 ( 0 ) TotalLabels = 60 ( 60 ) NameLabels = 1 ( 1 ) ColorLabels = 60 ( 60 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 5 ( 5 )
-COLORS : Colors = DEEPSKYBLUE2 MAGENTA1 ORANGE ORANGERED RED ( DEEPSKYBLUE2 MAGENTA1 ORANGE ORANGERED RED )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 16 -max_faults 0
+checkxstat D_First -n0 1 -n1 59 -n2 0 -total 60 -withname 1 -withcolor 60 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { DEEPSKYBLUE2 MAGENTA1 ORANGE ORANGERED RED } -nbcolors 5 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 1 -face 46 -shape 288
+checkstatshape res_1 -solid 0 -shell 1 -face 46 -freewire 0 -freeedge 0 -sharededge 117
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.01475021965 -avg 0.0004055209373]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 16 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 15 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 59 -n2 0 -total 60 -withname 1 -withcolor 60 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 5 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 59 -n2 0 -total 60 -withname 1 -withcolor 60 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { DEEPSKYBLUE2 MAGENTA1 ORANGE ORANGERED RED } -nbcolors 5 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 1 -face 46 -shape 288 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 1 -face 46 -freewire 0 -freeedge 0 -sharededge 117 -max_solid 0 -max_shell 1 -max_face 46 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.01475036715 -avg 0.0004055238368 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj4_k1_top-pe-203.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 52 ( 52 ) Summary = 336 ( 336 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 52 ( 52 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 138 ( 138 )
-TOLERANCE : MaxTol = 0.005901949404 ( 0.008046615145 ) AvgTol = 0.0002996481595 ( 0.0008772134802 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 52 -shape 336
+checkstatshape res_1 -solid 1 -shell 1 -face 52 -freewire 0 -freeedge 0 -sharededge 138
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.008046615145 -avg 0.0008772134802]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 52 -shape 336 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 52 -freewire 0 -freeedge 0 -sharededge 138 -max_solid 1 -max_shell 1 -max_face 52 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.005901949404 -avg 0.0002996481595 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj4_k1_top-pe-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 52 ( 52 ) Summary = 336 ( 336 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 52 ( 52 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 138 ( 138 )
-TOLERANCE : MaxTol = 0.005901949404 ( 0.008046615145 ) AvgTol = 0.0002996481598 ( 0.001190176608 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 1 ( 1 ) Volume = 1 ( 1 ) Area = 1 ( 1 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 1 -volume 1 -area 1 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 52 -shape 336
+checkstatshape res_1 -solid 1 -shell 1 -face 52 -freewire 0 -freeedge 0 -sharededge 138
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.008046615145 -avg 0.001190176608]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 1 -volume 1 -area 1 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 1 -volume 1 -area 1 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 52 -shape 336 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 52 -freewire 0 -freeedge 0 -sharededge 138 -max_solid 1 -max_shell 1 -max_face 52 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.005901949404 -avg 0.0002996481598 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj4_k1_top-tc-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 3 ( 3 ) Summary = 3 ( 3 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 59 ( 59 ) Face = 59 ( 59 ) Summary = 787 ( 787 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 59 ( 59 ) Face = 59 ( 59 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 304 ( 304 )
-TOLERANCE : MaxTol = 0.003826736784 ( 0.003826736784 ) AvgTol = 0.0001420064455 ( 0.0001420064456 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 59 ( 59 ) N2Labels = 0 ( 0 ) TotalLabels = 60 ( 60 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 59 ( 59 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 000 ( 000 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 5 -max_faults 0
+checkxstat D_First -n0 1 -n1 59 -n2 0 -total 60 -withname 1 -withcolor 0 -withlayer 59 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { 000 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 59 -face 59 -shape 787
+checkstatshape res_1 -solid 0 -shell 59 -face 59 -freewire 0 -freeedge 0 -sharededge 304
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.003826736784 -avg 0.0001420064456]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 5 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 59 -n2 0 -total 60 -withname 1 -withcolor 0 -withlayer 59 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 59 -n2 0 -total 60 -withname 1 -withcolor 0 -withlayer 59 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { 000 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 59 -face 59 -shape 787 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 59 -face 59 -freewire 0 -freeedge 0 -sharededge 304 -max_solid 0 -max_shell 59 -max_face 59 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.003826736784 -avg 0.0001420064455 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj4_k1_top-tu-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 1 ( 10 ) Summary = 1 ( 10 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 44 ( 44 ) Face = 44 ( 44 ) Summary = 559 ( 559 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 44 ( 44 ) Face = 44 ( 44 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 217 ( 217 )
-TOLERANCE : MaxTol = 0.0004382667275 ( 0.007688098235 ) AvgTol = 1.73413763e-005 ( 0.0002416764063 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 44 ( 44 ) N2Labels = 0 ( 0 ) TotalLabels = 45 ( 45 ) NameLabels = 1 ( 1 ) ColorLabels = 44 ( 44 ) LayerLabels = 44 ( 44 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = GREEN ( GREEN )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 001 ( 001 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 10 -max_faults 0
+checkxstat D_First -n0 1 -n1 44 -n2 0 -total 45 -withname 1 -withcolor 44 -withlayer 44 -centroid 0 -volume 0 -area 0 -colors { GREEN } -nbcolors 1 -layers { 001 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 44 -face 44 -shape 559
+checkstatshape res_1 -solid 0 -shell 44 -face 44 -freewire 0 -freeedge 0 -sharededge 217
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.007688098235 -avg 0.0002416764063]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 10 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 44 -n2 0 -total 45 -withname 1 -withcolor 44 -withlayer 44 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 44 -n2 0 -total 45 -withname 1 -withcolor 44 -withlayer 44 -centroid 0 -volume 0 -area 0 -colors { GREEN } -nbcolors 1 -layers { 001 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 44 -face 44 -shape 559 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 44 -face 44 -freewire 0 -freeedge 0 -sharededge 217 -max_solid 0 -max_shell 44 -max_face 44 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.0004382667275 -avg 1.73413763e-005 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj4_pm2-ac-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 7 ( 7 ) Shell = 7 ( 7 ) Face = 132 ( 132 ) Summary = 839 ( 839 )
-STATSHAPE : Solid = 7 ( 7 ) Shell = 7 ( 7 ) Face = 132 ( 132 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 328 ( 328 )
-TOLERANCE : MaxTol = 0.0003598691586 ( 0.0003598691585 ) AvgTol = 3.390213597e-005 ( 3.390213594e-005 )
-LABELS : N0Labels = 8 ( 8 ) N1Labels = 7 ( 7 ) N2Labels = 0 ( 0 ) TotalLabels = 15 ( 15 ) NameLabels = 15 ( 15 ) ColorLabels = 7 ( 7 ) LayerLabels = 7 ( 7 )
-PROPS : Centroid = 8 ( 8 ) Volume = 8 ( 8 ) Area = 8 ( 8 )
-NCOLORS : NColors = 6 ( 6 )
-COLORS : Colors = BLUE1 GREEN MAGENTA1 RED WHITE YELLOW ( BLUE1 GREEN MAGENTA1 RED WHITE YELLOW )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 0 ( 0 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 8 -n1 7 -n2 0 -total 15 -withname 15 -withcolor 7 -withlayer 7 -centroid 8 -volume 8 -area 8 -colors { BLUE1 GREEN MAGENTA1 RED WHITE YELLOW } -nbcolors 6 -layers { 0 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 7 -shell 7 -face 132 -shape 839
+checkstatshape res_1 -solid 7 -shell 7 -face 132 -freewire 0 -freeedge 0 -sharededge 328
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.0003598691585 -avg 3.390213594e-005]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 8 -n1 7 -n2 0 -total 15 -withname 15 -withcolor 7 -withlayer 7 -centroid 8 -volume 8 -area 8 -nbcolors 6 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 8 -n1 7 -n2 0 -total 15 -withname 15 -withcolor 7 -withlayer 7 -centroid 8 -volume 8 -area 8 -colors { BLUE1 GREEN MAGENTA1 RED WHITE YELLOW } -nbcolors 6 -layers { 0 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 7 -shell 7 -face 132 -shape 839 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 7 -shell 7 -face 132 -freewire 0 -freeedge 0 -sharededge 328 -max_solid 7 -max_shell 7 -max_face 132 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.0003598691586 -avg 3.390213597e-005 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj4_s1-ac-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 21 ) Warnings = 0 ( 0 ) Summary = 0 ( 21 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 4 ( 4 ) Summary = 4 ( 4 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 8 ( 8 ) Shell = 8 ( 8 ) Face = 100 ( 100 ) Summary = 647 ( 647 )
-STATSHAPE : Solid = 11 ( 11 ) Shell = 11 ( 11 ) Face = 138 ( 138 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 252 ( 252 )
-TOLERANCE : MaxTol = 0.001628351892 ( 0.001628351886 ) AvgTol = 4.341878168e-05 ( 4.34187816e-05 )
-LABELS : N0Labels = 13 ( 13 ) N1Labels = 14 ( 14 ) N2Labels = 0 ( 0 ) TotalLabels = 27 ( 27 ) NameLabels = 27 ( 27 ) ColorLabels = 8 ( 8 ) LayerLabels = 8 ( 8 )
-PROPS : Centroid = 13 ( 13 ) Volume = 13 ( 13 ) Area = 13 ( 13 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = YELLOW ( YELLOW )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 0 ( 0 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 21
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+checkxstat D_First -n0 13 -n1 14 -n2 0 -total 27 -withname 27 -withcolor 8 -withlayer 8 -centroid 13 -volume 13 -area 13 -colors { YELLOW } -nbcolors 1 -layers { 0 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 8 -shell 8 -face 100 -shape 647
+checkstatshape res_1 -solid 11 -shell 11 -face 138 -freewire 0 -freeedge 0 -sharededge 252
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.001628351886 -avg 4.34187816e-05]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 21
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 13 -n1 14 -n2 0 -total 27 -withname 27 -withcolor 8 -withlayer 8 -centroid 13 -volume 13 -area 13 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 13 -n1 14 -n2 0 -total 27 -withname 27 -withcolor 8 -withlayer 8 -centroid 13 -volume 13 -area 13 -colors { YELLOW } -nbcolors 1 -layers { 0 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 8 -shell 8 -face 100 -shape 647 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 11 -shell 11 -face 138 -freewire 0 -freeedge 0 -sharededge 252 -max_solid 11 -max_shell 11 -max_face 138 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.001628351892 -avg 4.341878168e-05 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
-
set filename trj4_s1-ec-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 1 ( 0 ) Summary = 1 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 8 ( 8 ) Shell = 8 ( 8 ) Face = 90 ( 90 ) Summary = 524 ( 524 )
-STATSHAPE : Solid = 11 ( 11 ) Shell = 11 ( 11 ) Face = 121 ( 121 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 187 ( 187 )
-TOLERANCE : MaxTol = 2.374497097e-006 ( 5.01013011e-006 ) AvgTol = 1.602968464e-007 ( 2.26790959e-007 )
-LABELS : N0Labels = 14 ( 14 ) N1Labels = 18 ( 18 ) N2Labels = 0 ( 0 ) TotalLabels = 32 ( 32 ) NameLabels = 30 ( 30 ) ColorLabels = 9 ( 9 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 14 ( 14 ) Volume = 14 ( 14 ) Area = 14 ( 14 )
-NCOLORS : NColors = 3 ( 3 )
-COLORS : Colors = BLUE1 RED YELLOW ( BLUE1 RED YELLOW )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 14 -n1 18 -n2 0 -total 32 -withname 30 -withcolor 9 -withlayer 0 -centroid 14 -volume 14 -area 14 -colors { BLUE1 RED YELLOW } -nbcolors 3 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 8 -shell 8 -face 90 -shape 524
+checkstatshape res_1 -solid 11 -shell 11 -face 121 -freewire 0 -freeedge 0 -sharededge 187
+set max_tol_res_1 [checkmaxtol res_1 -tol 5.01013011e-006 -avg 2.26790959e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 14 -n1 18 -n2 0 -total 32 -withname 30 -withcolor 9 -withlayer 0 -centroid 14 -volume 14 -area 14 -nbcolors 3 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 14 -n1 18 -n2 0 -total 32 -withname 30 -withcolor 9 -withlayer 0 -centroid 14 -volume 14 -area 14 -colors { BLUE1 RED YELLOW } -nbcolors 3 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 8 -shell 8 -face 90 -shape 524 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 11 -shell 11 -face 121 -freewire 0 -freeedge 0 -sharededge 187 -max_solid 11 -max_shell 11 -max_face 121 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 2.374497097e-006 -avg 1.602968464e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
-
set filename trj4_s1-pe-203.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 2 ( 0 ) Summary = 2 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 8 ( 8 ) Shell = 8 ( 8 ) Face = 146 ( 146 ) Summary = 873 ( 869 )
-STATSHAPE : Solid = 11 ( 11 ) Shell = 11 ( 11 ) Face = 188 ( 188 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 335 ( 331 )
-TOLERANCE : MaxTol = 0.0007596289751 ( 0.0007596289752 ) AvgTol = 1.023897715e-005 ( 1.028305667e-005 )
-LABELS : N0Labels = 13 ( 13 ) N1Labels = 16 ( 16 ) N2Labels = 0 ( 0 ) TotalLabels = 29 ( 29 ) NameLabels = 27 ( 27 ) ColorLabels = 10 ( 10 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 13 ( 13 ) Volume = 13 ( 13 ) Area = 13 ( 13 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = RED YELLOW ( RED YELLOW )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 13 -n1 16 -n2 0 -total 29 -withname 27 -withcolor 10 -withlayer 0 -centroid 13 -volume 13 -area 13 -colors { RED YELLOW } -nbcolors 2 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 8 -shell 8 -face 146 -shape 869
+checkstatshape res_1 -solid 11 -shell 11 -face 188 -freewire 0 -freeedge 0 -sharededge 331
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.0007596289752 -avg 1.028305667e-005]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 13 -n1 16 -n2 0 -total 29 -withname 27 -withcolor 10 -withlayer 0 -centroid 13 -volume 13 -area 13 -nbcolors 2 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 13 -n1 16 -n2 0 -total 29 -withname 27 -withcolor 10 -withlayer 0 -centroid 13 -volume 13 -area 13 -colors { RED YELLOW } -nbcolors 2 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 8 -shell 8 -face 146 -shape 873 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 11 -shell 11 -face 188 -freewire 0 -freeedge 0 -sharededge 335 -max_solid 11 -max_shell 11 -max_face 188 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.0007596289751 -avg 1.023897715e-005 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj4_s1-tu-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 11 ( 21 ) Summary = 11 ( 21 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 8 ( 8 ) Shell = 8 ( 8 ) Face = 137 ( 137 ) Summary = 818 ( 818 )
-STATSHAPE : Solid = 11 ( 11 ) Shell = 11 ( 11 ) Face = 180 ( 180 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 314 ( 314 )
-TOLERANCE : MaxTol = 0.0004751822636 ( 0.0004751822636 ) AvgTol = 8.52301535e-006 ( 8.525894359e-006 )
-LABELS : N0Labels = 13 ( 13 ) N1Labels = 14 ( 14 ) N2Labels = 0 ( 0 ) TotalLabels = 27 ( 27 ) NameLabels = 27 ( 27 ) ColorLabels = 8 ( 8 ) LayerLabels = 8 ( 8 )
-PROPS : Centroid = 13 ( 13 ) Volume = 13 ( 13 ) Area = 13 ( 13 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = GREEN ( GREEN )
-NLAYERS : NLayers = 8 ( 8 )
-LAYERS : Layers = 010 020 030 040 050 060 070 256 ( 010 020 030 040 050 060 070 256 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 21 -max_faults 0
+checkxstat D_First -n0 13 -n1 14 -n2 0 -total 27 -withname 27 -withcolor 8 -withlayer 8 -centroid 13 -volume 13 -area 13 -colors { GREEN } -nbcolors 1 -layers { 010 020 030 040 050 060 070 256 } -nblayers 8
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 8 -shell 8 -face 137 -shape 818
+checkstatshape res_1 -solid 11 -shell 11 -face 180 -freewire 0 -freeedge 0 -sharededge 314
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.0004751822636 -avg 8.525894359e-006]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 21 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 11 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 13 -n1 14 -n2 0 -total 27 -withname 27 -withcolor 8 -withlayer 8 -centroid 13 -volume 13 -area 13 -nbcolors 1 -nblayers 8
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 13 -n1 14 -n2 0 -total 27 -withname 27 -withcolor 8 -withlayer 8 -centroid 13 -volume 13 -area 13 -colors { GREEN } -nbcolors 1 -layers { 010 020 030 040 050 060 070 256 } -nblayers 8
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 8 -shell 8 -face 137 -shape 818 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 11 -shell 11 -face 180 -freewire 0 -freeedge 0 -sharededge 314 -max_solid 11 -max_shell 11 -max_face 180 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.0004751822636 -avg 8.52301535e-006 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj4_s1-ug-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 6 ( 35 ) Summary = 6 ( 35 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 8 ( 8 ) Shell = 8 ( 8 ) Face = 105 ( 105 ) Summary = 628 ( 628 )
-STATSHAPE : Solid = 11 ( 11 ) Shell = 11 ( 11 ) Face = 138 ( 138 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 231 ( 231 )
-TOLERANCE : MaxTol = 0.002131642002 ( 0.002131642024 ) AvgTol = 3.774810572e-005 ( 4.007566294e-005 )
-LABELS : N0Labels = 13 ( 13 ) N1Labels = 15 ( 15 ) N2Labels = 0 ( 0 ) TotalLabels = 28 ( 28 ) NameLabels = 27 ( 27 ) ColorLabels = 9 ( 9 ) LayerLabels = 8 ( 8 )
-PROPS : Centroid = 13 ( 13 ) Volume = 13 ( 13 ) Area = 13 ( 13 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = RED YELLOW ( RED YELLOW )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 11 ( 11 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 35 -max_faults 0
+checkxstat D_First -n0 13 -n1 15 -n2 0 -total 28 -withname 27 -withcolor 9 -withlayer 8 -centroid 13 -volume 13 -area 13 -colors { RED YELLOW } -nbcolors 2 -layers { 11 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 8 -shell 8 -face 105 -shape 628
+checkstatshape res_1 -solid 11 -shell 11 -face 138 -freewire 0 -freeedge 0 -sharededge 231
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.002131642024 -avg 4.007566294e-005]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 35 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 6 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 13 -n1 15 -n2 0 -total 28 -withname 27 -withcolor 9 -withlayer 8 -centroid 13 -volume 13 -area 13 -nbcolors 2 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 13 -n1 15 -n2 0 -total 28 -withname 27 -withcolor 9 -withlayer 8 -centroid 13 -volume 13 -area 13 -colors { RED YELLOW } -nbcolors 2 -layers { 11 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 8 -shell 8 -face 105 -shape 628 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 11 -shell 11 -face 138 -freewire 0 -freeedge 0 -sharededge 231 -max_solid 11 -max_shell 11 -max_face 138 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.002131642002 -avg 3.774810572e-005 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj5_k1-ct-203.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 1 ( 1 ) Summary = 1 ( 1 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 58 ( 58 ) Face = 58 ( 58 ) Summary = 837 ( 475 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 58 ( 58 ) Face = 58 ( 58 ) FreeWire = 0 ( 16 ) FreeEdge = 16 ( 16 ) SharedEdge = 312 ( 165 )
-TOLERANCE : MaxTol = 0.0008167207419 ( 0.0009782609385 ) AvgTol = 5.20029758e-005 ( 0.0001030777287 )
-LABELS : N0Labels = 3 ( 3 ) N1Labels = 2 ( 2 ) N2Labels = 0 ( 0 ) TotalLabels = 5 ( 5 ) NameLabels = 5 ( 5 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+checkxstat D_First -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 58 -face 58 -shape 475
+checkstatshape res_1 -solid 0 -shell 58 -face 58 -freewire 16 -freeedge 16 -sharededge 165
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.0009782609385 -avg 0.0001030777287]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 58 -face 58 -shape 837 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 58 -face 58 -freewire 0 -freeedge 16 -sharededge 312 -max_solid 0 -max_shell 58 -max_face 58 -max_freewire 16 -max_freeedge 16
+checkmaxtol res_2 -tol 0.0008167207419 -avg 5.20029758e-005 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
-
set filename trj5_k1-ec-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 12 ( 0 ) Summary = 12 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 47 ( 47 ) Face = 47 ( 47 ) Summary = 614 ( 614 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 47 ( 47 ) Face = 47 ( 47 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 240 ( 240 )
-TOLERANCE : MaxTol = 0.0001716884488 ( 0.0009724780717 ) AvgTol = 5.387053125e-006 ( 7.074542139e-005 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 47 -face 47 -shape 614
+checkstatshape res_1 -solid 0 -shell 47 -face 47 -freewire 0 -freeedge 0 -sharededge 240
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.0009724780717 -avg 7.074542139e-005]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 47 -face 47 -shape 614 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 47 -face 47 -freewire 0 -freeedge 0 -sharededge 240 -max_solid 0 -max_shell 47 -max_face 47 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.0001716884488 -avg 5.387053125e-006 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj5_k1-id-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 15 ( 16 ) Summary = 15 ( 16 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 46 ( 46 ) Summary = 288 ( 288 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 46 ( 46 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 117 ( 117 )
-TOLERANCE : MaxTol = 0.01475036715 ( 0.01475021965 ) AvgTol = 0.0004055238368 ( 0.0004055209373 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 59 ( 59 ) N2Labels = 0 ( 0 ) TotalLabels = 60 ( 60 ) NameLabels = 1 ( 1 ) ColorLabels = 60 ( 60 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 5 ( 5 )
-COLORS : Colors = DEEPSKYBLUE2 MAGENTA1 ORANGE ORANGERED RED ( DEEPSKYBLUE2 MAGENTA1 ORANGE ORANGERED RED )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 16 -max_faults 0
+checkxstat D_First -n0 1 -n1 59 -n2 0 -total 60 -withname 1 -withcolor 60 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { DEEPSKYBLUE2 MAGENTA1 ORANGE ORANGERED RED } -nbcolors 5 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 1 -face 46 -shape 288
+checkstatshape res_1 -solid 0 -shell 1 -face 46 -freewire 0 -freeedge 0 -sharededge 117
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.01475021965 -avg 0.0004055209373]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 16 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 15 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 59 -n2 0 -total 60 -withname 1 -withcolor 60 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 5 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 59 -n2 0 -total 60 -withname 1 -withcolor 60 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { DEEPSKYBLUE2 MAGENTA1 ORANGE ORANGERED RED } -nbcolors 5 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 1 -face 46 -shape 288 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 1 -face 46 -freewire 0 -freeedge 0 -sharededge 117 -max_solid 0 -max_shell 1 -max_face 46 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.01475036715 -avg 0.0004055238368 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj5_k1-pe-203.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 52 ( 52 ) Summary = 335 ( 335 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 52 ( 52 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 138 ( 138 )
-TOLERANCE : MaxTol = 0.003855414315 ( 0.005725189017 ) AvgTol = 0.001273937187 ( 0.001970808103 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 1 -face 52 -shape 335
+checkstatshape res_1 -solid 0 -shell 1 -face 52 -freewire 0 -freeedge 0 -sharededge 138
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.005725189017 -avg 0.001970808103]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 1 -face 52 -shape 335 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 1 -face 52 -freewire 0 -freeedge 0 -sharededge 138 -max_solid 0 -max_shell 1 -max_face 52 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.003855414315 -avg 0.001273937187 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj5_k1-pe-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 52 ( 52 ) Summary = 335 ( 335 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 52 ( 52 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 138 ( 138 )
-TOLERANCE : MaxTol = 0.003855414315 ( 0.005725189017 ) AvgTol = 0.001273937187 ( 0.001970808103 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 1 ( 1 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 1 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 1 -face 52 -shape 335
+checkstatshape res_1 -solid 0 -shell 1 -face 52 -freewire 0 -freeedge 0 -sharededge 138
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.005725189017 -avg 0.001970808103]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 1 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 1 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 1 -face 52 -shape 335 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 1 -face 52 -freewire 0 -freeedge 0 -sharededge 138 -max_solid 0 -max_shell 1 -max_face 52 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.003855414315 -avg 0.001273937187 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj5_k1-tc-203.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 3 ( 3 ) Summary = 3 ( 3 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 59 ( 59 ) Face = 59 ( 59 ) Summary = 787 ( 787 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 59 ( 59 ) Face = 59 ( 59 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 304 ( 304 )
-TOLERANCE : MaxTol = 0.003826736784 ( 0.003826736784 ) AvgTol = 0.0001420064455 ( 0.0001420064456 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 59 ( 59 ) N2Labels = 0 ( 0 ) TotalLabels = 60 ( 60 ) NameLabels = 1 ( 1 ) ColorLabels = 59 ( 59 ) LayerLabels = 59 ( 59 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 3 ( 3 )
-COLORS : Colors = YELLOW2 YELLOW3 YELLOW4 ( YELLOW2 YELLOW3 YELLOW4 )
-NLAYERS : NLayers = 3 ( 3 )
-LAYERS : Layers = 001 002 003 ( 001 002 003 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 5 -max_faults 0
+checkxstat D_First -n0 1 -n1 59 -n2 0 -total 60 -withname 1 -withcolor 59 -withlayer 59 -centroid 0 -volume 0 -area 0 -colors { YELLOW2 YELLOW3 YELLOW4 } -nbcolors 3 -layers { 001 002 003 } -nblayers 3
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 59 -face 59 -shape 787
+checkstatshape res_1 -solid 0 -shell 59 -face 59 -freewire 0 -freeedge 0 -sharededge 304
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.003826736784 -avg 0.0001420064456]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 5 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 59 -n2 0 -total 60 -withname 1 -withcolor 59 -withlayer 59 -centroid 0 -volume 0 -area 0 -nbcolors 3 -nblayers 3
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 59 -n2 0 -total 60 -withname 1 -withcolor 59 -withlayer 59 -centroid 0 -volume 0 -area 0 -colors { YELLOW2 YELLOW3 YELLOW4 } -nbcolors 3 -layers { 001 002 003 } -nblayers 3
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 59 -face 59 -shape 787 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 59 -face 59 -freewire 0 -freeedge 0 -sharededge 304 -max_solid 0 -max_shell 59 -max_face 59 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.003826736784 -avg 0.0001420064455 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
-
set filename trj5_pm3-ct-203.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 17 ( 7 ) Summary = 17 ( 7 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 124 ( 124 ) Summary = 774 ( 774 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 124 ( 124 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 314 ( 314 )
-TOLERANCE : MaxTol = 0.002741067574 ( 0.002741067574 ) AvgTol = 5.224860755e-005 ( 5.209425758e-005 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 7 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 124 -shape 774
+checkstatshape res_1 -solid 1 -shell 1 -face 124 -freewire 0 -freeedge 0 -sharededge 314
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.002741067574 -avg 5.209425758e-005]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 7 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 17 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 124 -shape 774 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 124 -freewire 0 -freeedge 0 -sharededge 314 -max_solid 1 -max_shell 1 -max_face 124 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.002741067574 -avg 5.224860755e-005 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj5_s1-ac-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 21 ) Warnings = 0 ( 0 ) Summary = 0 ( 21 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 4 ( 4 ) Summary = 4 ( 4 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 8 ( 8 ) Shell = 8 ( 8 ) Face = 100 ( 100 ) Summary = 647 ( 647 )
-STATSHAPE : Solid = 11 ( 11 ) Shell = 11 ( 11 ) Face = 138 ( 138 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 252 ( 252 )
-TOLERANCE : MaxTol = 0.0006410834224 ( 0.0006410834197 ) AvgTol = 1.715299862e-05 ( 1.715299856e-05 )
-LABELS : N0Labels = 13 ( 13 ) N1Labels = 14 ( 14 ) N2Labels = 0 ( 0 ) TotalLabels = 27 ( 27 ) NameLabels = 27 ( 27 ) ColorLabels = 8 ( 8 ) LayerLabels = 8 ( 8 )
-PROPS : Centroid = 13 ( 13 ) Volume = 13 ( 13 ) Area = 13 ( 13 )
-NCOLORS : NColors = 8 ( 8 )
-COLORS : Colors = BLUE1 CYAN1 DARKGOLDENROD1 GREEN LIGHTPINK4 RED TURQUOISE4 YELLOW ( BLUE1 CYAN1 DARKGOLDENROD1 GREEN LIGHTPINK4 RED TURQUOISE4 YELLOW )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 0 ( 0 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 21
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+checkxstat D_First -n0 13 -n1 14 -n2 0 -total 27 -withname 27 -withcolor 8 -withlayer 8 -centroid 13 -volume 13 -area 13 -colors { BLUE1 CYAN1 DARKGOLDENROD1 GREEN LIGHTPINK4 RED TURQUOISE4 YELLOW } -nbcolors 8 -layers { 0 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 8 -shell 8 -face 100 -shape 647
+checkstatshape res_1 -solid 11 -shell 11 -face 138 -freewire 0 -freeedge 0 -sharededge 252
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.0006410834197 -avg 1.715299856e-05]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 21
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 13 -n1 14 -n2 0 -total 27 -withname 27 -withcolor 8 -withlayer 8 -centroid 13 -volume 13 -area 13 -nbcolors 8 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 13 -n1 14 -n2 0 -total 27 -withname 27 -withcolor 8 -withlayer 8 -centroid 13 -volume 13 -area 13 -colors { BLUE1 CYAN1 DARKGOLDENROD1 GREEN LIGHTPINK4 RED TURQUOISE4 YELLOW } -nbcolors 8 -layers { 0 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 8 -shell 8 -face 100 -shape 647 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 11 -shell 11 -face 138 -freewire 0 -freeedge 0 -sharededge 252 -max_solid 11 -max_shell 11 -max_face 138 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.0006410834224 -avg 1.715299862e-05 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj5_s1-in-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 8 ( 9 ) Summary = 8 ( 9 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 8 ( 8 ) Shell = 8 ( 8 ) Face = 108 ( 108 ) Summary = 689 ( 689 )
-STATSHAPE : Solid = 11 ( 11 ) Shell = 11 ( 11 ) Face = 146 ( 146 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 270 ( 270 )
-TOLERANCE : MaxTol = 0.0006380410651 ( 0.0006380410622 ) AvgTol = 1.220932663e-005 ( 1.22093266e-005 )
-LABELS : N0Labels = 13 ( 13 ) N1Labels = 14 ( 14 ) N2Labels = 0 ( 0 ) TotalLabels = 27 ( 27 ) NameLabels = 27 ( 27 ) ColorLabels = 8 ( 8 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 8 ( 8 )
-COLORS : Colors = BLUE3 CYAN1 DEEPSKYBLUE3 INDIANRED2 RED3 SANDYBROWN SPRINGGREEN3 YELLOW3 ( BLUE3 CYAN1 DEEPSKYBLUE3 INDIANRED2 RED3 SANDYBROWN SPRINGGREEN3 YELLOW3 )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 9 -max_faults 0
+checkxstat D_First -n0 13 -n1 14 -n2 0 -total 27 -withname 27 -withcolor 8 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE3 CYAN1 DEEPSKYBLUE3 INDIANRED2 RED3 SANDYBROWN SPRINGGREEN3 YELLOW3 } -nbcolors 8 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 8 -shell 8 -face 108 -shape 689
+checkstatshape res_1 -solid 11 -shell 11 -face 146 -freewire 0 -freeedge 0 -sharededge 270
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.0006380410622 -avg 1.22093266e-005]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 9 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 8 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 13 -n1 14 -n2 0 -total 27 -withname 27 -withcolor 8 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 8 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 13 -n1 14 -n2 0 -total 27 -withname 27 -withcolor 8 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE3 CYAN1 DEEPSKYBLUE3 INDIANRED2 RED3 SANDYBROWN SPRINGGREEN3 YELLOW3 } -nbcolors 8 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 8 -shell 8 -face 108 -shape 689 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 11 -shell 11 -face 146 -freewire 0 -freeedge 0 -sharededge 270 -max_solid 11 -max_shell 11 -max_face 146 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.0006380410651 -avg 1.220932663e-005 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj5_s1-ug-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 6 ( 35 ) Summary = 6 ( 35 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 8 ( 8 ) Shell = 8 ( 8 ) Face = 105 ( 105 ) Summary = 628 ( 628 )
-STATSHAPE : Solid = 11 ( 11 ) Shell = 11 ( 11 ) Face = 138 ( 138 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 231 ( 231 )
-TOLERANCE : MaxTol = 0.002131642002 ( 0.002131642024 ) AvgTol = 3.774810572e-005 ( 4.007566294e-005 )
-LABELS : N0Labels = 13 ( 13 ) N1Labels = 15 ( 15 ) N2Labels = 0 ( 0 ) TotalLabels = 28 ( 28 ) NameLabels = 27 ( 27 ) ColorLabels = 9 ( 9 ) LayerLabels = 8 ( 8 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = RED YELLOW ( RED YELLOW )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 11 ( 11 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 35 -max_faults 0
+checkxstat D_First -n0 13 -n1 15 -n2 0 -total 28 -withname 27 -withcolor 9 -withlayer 8 -centroid 0 -volume 0 -area 0 -colors { RED YELLOW } -nbcolors 2 -layers { 11 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 8 -shell 8 -face 105 -shape 628
+checkstatshape res_1 -solid 11 -shell 11 -face 138 -freewire 0 -freeedge 0 -sharededge 231
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.002131642024 -avg 4.007566294e-005]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 35 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 6 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 13 -n1 15 -n2 0 -total 28 -withname 27 -withcolor 9 -withlayer 8 -centroid 0 -volume 0 -area 0 -nbcolors 2 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 13 -n1 15 -n2 0 -total 28 -withname 27 -withcolor 9 -withlayer 8 -centroid 0 -volume 0 -area 0 -colors { RED YELLOW } -nbcolors 2 -layers { 11 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 8 -shell 8 -face 105 -shape 628 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 11 -shell 11 -face 138 -freewire 0 -freeedge 0 -sharededge 231 -max_solid 11 -max_shell 11 -max_face 138 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.002131642002 -avg 3.774810572e-005 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj6_as1-hc-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 14 ) Summary = 0 ( 14 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 5 ( 5 ) Shell = 5 ( 5 ) Face = 39 ( 39 ) Summary = 275 ( 275 )
-STATSHAPE : Solid = 18 ( 18 ) Shell = 18 ( 18 ) Face = 125 ( 125 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 91 ( 91 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1e-005 ) AvgTol = 1.00006917e-007 ( 2.879948407e-006 )
-LABELS : N0Labels = 15 ( 15 ) N1Labels = 66 ( 66 ) N2Labels = 0 ( 0 ) TotalLabels = 81 ( 81 ) NameLabels = 42 ( 42 ) ColorLabels = 39 ( 39 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 5 ( 5 ) Volume = 5 ( 5 ) Area = 5 ( 5 )
-NCOLORS : NColors = 3 ( 3 )
-COLORS : Colors = BLUE1 GREEN RED ( BLUE1 GREEN RED )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 14 -max_faults 0
+checkxstat D_First -n0 15 -n1 66 -n2 0 -total 81 -withname 42 -withcolor 39 -withlayer 0 -centroid 5 -volume 5 -area 5 -colors { BLUE1 GREEN RED } -nbcolors 3 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 5 -shell 5 -face 39 -shape 275
+checkstatshape res_1 -solid 18 -shell 18 -face 125 -freewire 0 -freeedge 0 -sharededge 91
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-005 -avg 2.879948407e-006]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 14 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 15 -n1 66 -n2 0 -total 81 -withname 42 -withcolor 39 -withlayer 0 -centroid 5 -volume 5 -area 5 -nbcolors 3 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 15 -n1 66 -n2 0 -total 81 -withname 42 -withcolor 39 -withlayer 0 -centroid 5 -volume 5 -area 5 -colors { BLUE1 GREEN RED } -nbcolors 3 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 5 -shell 5 -face 39 -shape 275 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 18 -shell 18 -face 125 -freewire 0 -freeedge 0 -sharededge 91 -max_solid 18 -max_shell 18 -max_face 125 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.00006917e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj6_k1-ct-203.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 6 ( 10 ) Summary = 6 ( 10 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 62 ( 62 ) Summary = 387 ( 387 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 62 ( 62 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 157 ( 157 )
-TOLERANCE : MaxTol = 0.0003235964851 ( 0.0003235964851 ) AvgTol = 2.884536783e-005 ( 2.895438261e-005 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 10 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 1 -face 62 -shape 387
+checkstatshape res_1 -solid 0 -shell 1 -face 62 -freewire 0 -freeedge 0 -sharededge 157
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.0003235964851 -avg 2.895438261e-005]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 10 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 6 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 1 -face 62 -shape 387 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 1 -face 62 -freewire 0 -freeedge 0 -sharededge 157 -max_solid 0 -max_shell 1 -max_face 62 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.0003235964851 -avg 2.884536783e-005 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj6_k1-ct-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 6 ( 10 ) Summary = 6 ( 10 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 62 ( 62 ) Summary = 387 ( 387 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 62 ( 62 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 157 ( 157 )
-TOLERANCE : MaxTol = 0.0005893670486 ( 0.0005893670486 ) AvgTol = 4.282230104e-005 ( 4.293131589e-005 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = YELLOW ( YELLOW )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 10 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { YELLOW } -nbcolors 1 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 1 -face 62 -shape 387
+checkstatshape res_1 -solid 0 -shell 1 -face 62 -freewire 0 -freeedge 0 -sharededge 157
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.0005893670486 -avg 4.293131589e-005]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 10 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 6 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { YELLOW } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 1 -face 62 -shape 387 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 1 -face 62 -freewire 0 -freeedge 0 -sharededge 157 -max_solid 0 -max_shell 1 -max_face 62 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.0005893670486 -avg 4.282230104e-005 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj6_k1-id-203.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 15 ( 16 ) Summary = 15 ( 16 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 46 ( 46 ) Summary = 288 ( 288 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 46 ( 46 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 117 ( 117 )
-TOLERANCE : MaxTol = 0.01475036715 ( 0.01475021965 ) AvgTol = 0.0004055238368 ( 0.0004055209373 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 16 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 1 -face 46 -shape 288
+checkstatshape res_1 -solid 0 -shell 1 -face 46 -freewire 0 -freeedge 0 -sharededge 117
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.01475021965 -avg 0.0004055209373]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 16 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 15 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 1 -face 46 -shape 288 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 1 -face 46 -freewire 0 -freeedge 0 -sharededge 117 -max_solid 0 -max_shell 1 -max_face 46 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.01475036715 -avg 0.0004055238368 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj6_k1-pe-203.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 52 ( 52 ) Summary = 336 ( 336 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 52 ( 52 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 138 ( 138 )
-TOLERANCE : MaxTol = 0.005901949404 ( 0.008046615145 ) AvgTol = 0.0002996481595 ( 0.0008772134802 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 52 -shape 336
+checkstatshape res_1 -solid 1 -shell 1 -face 52 -freewire 0 -freeedge 0 -sharededge 138
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.008046615145 -avg 0.0008772134802]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 52 -shape 336 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 52 -freewire 0 -freeedge 0 -sharededge 138 -max_solid 1 -max_shell 1 -max_face 52 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.005901949404 -avg 0.0002996481595 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj6_k1-pe-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 52 ( 52 ) Summary = 336 ( 336 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 52 ( 52 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 138 ( 138 )
-TOLERANCE : MaxTol = 0.005901949404 ( 0.008046615145 ) AvgTol = 0.0002996481595 ( 0.0008772134802 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 1 ( 1 ) Volume = 1 ( 1 ) Area = 1 ( 1 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 1 -volume 1 -area 1 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 52 -shape 336
+checkstatshape res_1 -solid 1 -shell 1 -face 52 -freewire 0 -freeedge 0 -sharededge 138
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.008046615145 -avg 0.0008772134802]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 1 -volume 1 -area 1 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 1 -volume 1 -area 1 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 52 -shape 336 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 52 -freewire 0 -freeedge 0 -sharededge 138 -max_solid 1 -max_shell 1 -max_face 52 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.005901949404 -avg 0.0002996481595 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj6_k1-sd-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 2 ( 2 ) Face = 57 ( 57 ) Summary = 363 ( 363 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 2 ( 2 ) Face = 57 ( 57 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 147 ( 147 )
-TOLERANCE : MaxTol = 4.531032216e-007 ( 4.53103015e-007 ) AvgTol = 1.197112472e-007 ( 1.197112451e-007 )
-LABELS : N0Labels = 4 ( 4 ) N1Labels = 3 ( 3 ) N2Labels = 0 ( 0 ) TotalLabels = 7 ( 7 ) NameLabels = 7 ( 7 ) ColorLabels = 2 ( 2 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = MEDIUMTURQUOISE ( MEDIUMTURQUOISE )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 4 -n1 3 -n2 0 -total 7 -withname 7 -withcolor 2 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { MEDIUMTURQUOISE } -nbcolors 1 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 2 -face 57 -shape 363
+checkstatshape res_1 -solid 0 -shell 2 -face 57 -freewire 0 -freeedge 0 -sharededge 147
+set max_tol_res_1 [checkmaxtol res_1 -tol 4.53103015e-007 -avg 1.197112451e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 4 -n1 3 -n2 0 -total 7 -withname 7 -withcolor 2 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 4 -n1 3 -n2 0 -total 7 -withname 7 -withcolor 2 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { MEDIUMTURQUOISE } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 2 -face 57 -shape 363 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 2 -face 57 -freewire 0 -freeedge 0 -sharededge 147 -max_solid 0 -max_shell 2 -max_face 57 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 4.531032216e-007 -avg 1.197112472e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj6_k1-ug-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 9 ) Summary = 0 ( 9 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 44 ( 44 ) Face = 44 ( 44 ) Summary = 559 ( 559 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 44 ( 44 ) Face = 44 ( 44 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 217 ( 217 )
-TOLERANCE : MaxTol = 0.004260881238 ( 0.004260881238 ) AvgTol = 0.0001729387338 ( 0.0001739274842 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 44 ( 44 ) N2Labels = 0 ( 0 ) TotalLabels = 45 ( 45 ) NameLabels = 1 ( 1 ) ColorLabels = 44 ( 44 ) LayerLabels = 44 ( 44 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = GREEN ( GREEN )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 1 ( 1 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 9 -max_faults 0
+checkxstat D_First -n0 1 -n1 44 -n2 0 -total 45 -withname 1 -withcolor 44 -withlayer 44 -centroid 0 -volume 0 -area 0 -colors { GREEN } -nbcolors 1 -layers { 1 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 44 -face 44 -shape 559
+checkstatshape res_1 -solid 0 -shell 44 -face 44 -freewire 0 -freeedge 0 -sharededge 217
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.004260881238 -avg 0.0001739274842]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 9 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 44 -n2 0 -total 45 -withname 1 -withcolor 44 -withlayer 44 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 44 -n2 0 -total 45 -withname 1 -withcolor 44 -withlayer 44 -centroid 0 -volume 0 -area 0 -colors { GREEN } -nbcolors 1 -layers { 1 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 44 -face 44 -shape 559 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 44 -face 44 -freewire 0 -freeedge 0 -sharededge 217 -max_solid 0 -max_shell 44 -max_face 44 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.004260881238 -avg 0.0001729387338 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj6_pm4-ug-203.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 2 ( 2 ) Summary = 2 ( 2 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 70 ( 70 ) Summary = 427 ( 427 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 70 ( 70 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 176 ( 176 )
-TOLERANCE : MaxTol = 0.006057322867 ( 0.01790682739 ) AvgTol = 0.0009755900047 ( 0.002119269064 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 70 -shape 427
+checkstatshape res_1 -solid 1 -shell 1 -face 70 -freewire 0 -freeedge 0 -sharededge 176
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.01790682739 -avg 0.002119269064]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 70 -shape 427 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 70 -freewire 0 -freeedge 0 -sharededge 176 -max_solid 1 -max_shell 1 -max_face 70 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.006057322867 -avg 0.0009755900047 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj7_AS1HCo.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 14 ) Summary = 0 ( 14 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 5 ( 5 ) Shell = 5 ( 5 ) Face = 39 ( 39 ) Summary = 275 ( 275 )
-STATSHAPE : Solid = 18 ( 18 ) Shell = 18 ( 18 ) Face = 125 ( 125 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 91 ( 91 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1e-005 ) AvgTol = 1.00006917e-007 ( 2.879948407e-006 )
-LABELS : N0Labels = 15 ( 15 ) N1Labels = 27 ( 27 ) N2Labels = 0 ( 0 ) TotalLabels = 42 ( 42 ) NameLabels = 42 ( 42 ) ColorLabels = 5 ( 5 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 15 ( 15 ) Volume = 15 ( 15 ) Area = 15 ( 15 )
-NCOLORS : NColors = 3 ( 3 )
-COLORS : Colors = BLUE1 GREEN RED ( BLUE1 GREEN RED )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 14 -max_faults 0
+checkxstat D_First -n0 15 -n1 27 -n2 0 -total 42 -withname 42 -withcolor 5 -withlayer 0 -centroid 15 -volume 15 -area 15 -colors { BLUE1 GREEN RED } -nbcolors 3 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 5 -shell 5 -face 39 -shape 275
+checkstatshape res_1 -solid 18 -shell 18 -face 125 -freewire 0 -freeedge 0 -sharededge 91
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-005 -avg 2.879948407e-006]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 14 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 15 -n1 27 -n2 0 -total 42 -withname 42 -withcolor 5 -withlayer 0 -centroid 15 -volume 15 -area 15 -nbcolors 3 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 15 -n1 27 -n2 0 -total 42 -withname 42 -withcolor 5 -withlayer 0 -centroid 15 -volume 15 -area 15 -colors { BLUE1 GREEN RED } -nbcolors 3 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 5 -shell 5 -face 39 -shape 275 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 18 -shell 18 -face 125 -freewire 0 -freeedge 0 -sharededge 91 -max_solid 18 -max_shell 18 -max_face 125 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.00006917e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj7_as1-hc-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 14 ) Summary = 0 ( 14 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 5 ( 5 ) Shell = 5 ( 5 ) Face = 39 ( 39 ) Summary = 275 ( 275 )
-STATSHAPE : Solid = 18 ( 18 ) Shell = 18 ( 18 ) Face = 125 ( 125 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 91 ( 91 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1e-005 ) AvgTol = 1.00006917e-007 ( 2.879948407e-006 )
-LABELS : N0Labels = 15 ( 15 ) N1Labels = 35 ( 35 ) N2Labels = 0 ( 0 ) TotalLabels = 50 ( 50 ) NameLabels = 42 ( 42 ) ColorLabels = 13 ( 13 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 6 ( 6 ) Volume = 6 ( 6 ) Area = 6 ( 6 )
-NCOLORS : NColors = 3 ( 3 )
-COLORS : Colors = BLUE1 GREEN RED ( BLUE1 GREEN RED )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 14 -max_faults 0
+checkxstat D_First -n0 15 -n1 35 -n2 0 -total 50 -withname 42 -withcolor 13 -withlayer 0 -centroid 6 -volume 6 -area 6 -colors { BLUE1 GREEN RED } -nbcolors 3 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 5 -shell 5 -face 39 -shape 275
+checkstatshape res_1 -solid 18 -shell 18 -face 125 -freewire 0 -freeedge 0 -sharededge 91
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-005 -avg 2.879948407e-006]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 14 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 15 -n1 35 -n2 0 -total 50 -withname 42 -withcolor 13 -withlayer 0 -centroid 6 -volume 6 -area 6 -nbcolors 3 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 15 -n1 35 -n2 0 -total 50 -withname 42 -withcolor 13 -withlayer 0 -centroid 6 -volume 6 -area 6 -colors { BLUE1 GREEN RED } -nbcolors 3 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 5 -shell 5 -face 39 -shape 275 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 18 -shell 18 -face 125 -freewire 0 -freeedge 0 -sharededge 91 -max_solid 18 -max_shell 18 -max_face 125 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.00006917e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj7_k1-ac-203.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 29 ( 39 ) Summary = 29 ( 39 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 2 ( 2 ) Face = 76 ( 76 ) Summary = 476 ( 476 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 2 ( 2 ) Face = 76 ( 76 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 194 ( 194 )
-TOLERANCE : MaxTol = 0.01009527272 ( 0.01009527272 ) AvgTol = 0.00119328063 ( 0.001195936805 )
-LABELS : N0Labels = 2 ( 2 ) N1Labels = 1 ( 1 ) N2Labels = 0 ( 0 ) TotalLabels = 3 ( 3 ) NameLabels = 3 ( 3 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 39 -max_faults 0
+checkxstat D_First -n0 2 -n1 1 -n2 0 -total 3 -withname 3 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 2 -face 76 -shape 476
+checkstatshape res_1 -solid 0 -shell 2 -face 76 -freewire 0 -freeedge 0 -sharededge 194
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.01009527272 -avg 0.001195936805]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 39 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 29 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 2 -n1 1 -n2 0 -total 3 -withname 3 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 2 -n1 1 -n2 0 -total 3 -withname 3 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 2 -face 76 -shape 476 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 2 -face 76 -freewire 0 -freeedge 0 -sharededge 194 -max_solid 0 -max_shell 2 -max_face 76 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.01009527272 -avg 0.00119328063 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj7_k1-ct-203.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 1 ) Summary = 0 ( 1 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 58 ( 58 ) Summary = 367 ( 367 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 58 ( 58 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 149 ( 149 )
-TOLERANCE : MaxTol = 0.0004768443614 ( 0.0004768443614 ) AvgTol = 6.422584066e-005 ( 6.422994218e-005 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 1 -face 58 -shape 367
+checkstatshape res_1 -solid 0 -shell 1 -face 58 -freewire 0 -freeedge 0 -sharededge 149
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.0004768443614 -avg 6.422994218e-005]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 1 -face 58 -shape 367 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 1 -face 58 -freewire 0 -freeedge 0 -sharededge 149 -max_solid 0 -max_shell 1 -max_face 58 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.0004768443614 -avg 6.422584066e-005 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj7_k1-pe-203.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 52 ( 52 ) Summary = 335 ( 335 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 52 ( 52 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 138 ( 138 )
-TOLERANCE : MaxTol = 0.005901949404 ( 0.008046615145 ) AvgTol = 0.0002996481595 ( 0.0008772134802 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 1 ( 1 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 1 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 1 -face 52 -shape 335
+checkstatshape res_1 -solid 0 -shell 1 -face 52 -freewire 0 -freeedge 0 -sharededge 138
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.008046615145 -avg 0.0008772134802]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 1 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 1 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 1 -face 52 -shape 335 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 1 -face 52 -freewire 0 -freeedge 0 -sharededge 138 -max_solid 0 -max_shell 1 -max_face 52 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.005901949404 -avg 0.0002996481595 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj7_k1-pe-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 52 ( 52 ) Summary = 335 ( 335 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 52 ( 52 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 138 ( 138 )
-TOLERANCE : MaxTol = 0.005901949404 ( 0.008046615145 ) AvgTol = 0.0002996481595 ( 0.0008772134802 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 1 ( 1 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 1 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 1 -face 52 -shape 335
+checkstatshape res_1 -solid 0 -shell 1 -face 52 -freewire 0 -freeedge 0 -sharededge 138
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.008046615145 -avg 0.0008772134802]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 1 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 1 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 1 -face 52 -shape 335 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 1 -face 52 -freewire 0 -freeedge 0 -sharededge 138 -max_solid 0 -max_shell 1 -max_face 52 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.005901949404 -avg 0.0002996481595 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj7_k1-ug-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 9 ) Summary = 0 ( 9 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 44 ( 44 ) Face = 44 ( 44 ) Summary = 559 ( 559 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 44 ( 44 ) Face = 44 ( 44 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 217 ( 217 )
-TOLERANCE : MaxTol = 0.004260881238 ( 0.004260881238 ) AvgTol = 0.0001729387338 ( 0.0001739274842 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 44 ( 44 ) N2Labels = 0 ( 0 ) TotalLabels = 45 ( 45 ) NameLabels = 1 ( 1 ) ColorLabels = 44 ( 44 ) LayerLabels = 44 ( 44 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = GREEN ( GREEN )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 1 ( 1 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 9 -max_faults 0
+checkxstat D_First -n0 1 -n1 44 -n2 0 -total 45 -withname 1 -withcolor 44 -withlayer 44 -centroid 0 -volume 0 -area 0 -colors { GREEN } -nbcolors 1 -layers { 1 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 44 -face 44 -shape 559
+checkstatshape res_1 -solid 0 -shell 44 -face 44 -freewire 0 -freeedge 0 -sharededge 217
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.004260881238 -avg 0.0001739274842]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 9 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 44 -n2 0 -total 45 -withname 1 -withcolor 44 -withlayer 44 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 44 -n2 0 -total 45 -withname 1 -withcolor 44 -withlayer 44 -centroid 0 -volume 0 -area 0 -colors { GREEN } -nbcolors 1 -layers { 1 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 44 -face 44 -shape 559 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 44 -face 44 -freewire 0 -freeedge 0 -sharededge 217 -max_solid 0 -max_shell 44 -max_face 44 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.004260881238 -avg 0.0001729387338 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj8_k1-ac-203.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 29 ( 39 ) Summary = 29 ( 39 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 2 ( 2 ) Shell = 2 ( 2 ) Face = 76 ( 76 ) Summary = 478 ( 478 )
-STATSHAPE : Solid = 2 ( 2 ) Shell = 2 ( 2 ) Face = 76 ( 76 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 194 ( 194 )
-TOLERANCE : MaxTol = 0.01009527272 ( 0.01009527272 ) AvgTol = 0.00119328063 ( 0.001195936805 )
-LABELS : N0Labels = 2 ( 2 ) N1Labels = 1 ( 1 ) N2Labels = 0 ( 0 ) TotalLabels = 3 ( 3 ) NameLabels = 3 ( 3 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 39 -max_faults 0
+checkxstat D_First -n0 2 -n1 1 -n2 0 -total 3 -withname 3 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 2 -shell 2 -face 76 -shape 478
+checkstatshape res_1 -solid 2 -shell 2 -face 76 -freewire 0 -freeedge 0 -sharededge 194
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.01009527272 -avg 0.001195936805]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 39 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 29 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 2 -n1 1 -n2 0 -total 3 -withname 3 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 2 -n1 1 -n2 0 -total 3 -withname 3 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 2 -shell 2 -face 76 -shape 478 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 2 -shell 2 -face 76 -freewire 0 -freeedge 0 -sharededge 194 -max_solid 2 -max_shell 2 -max_face 76 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.01009527272 -avg 0.00119328063 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj8_k1-ct-203.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 1 ) Summary = 0 ( 1 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 58 ( 58 ) Summary = 367 ( 367 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 58 ( 58 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 149 ( 149 )
-TOLERANCE : MaxTol = 0.0004768443614 ( 0.0004768443614 ) AvgTol = 6.422584066e-005 ( 6.422994218e-005 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 1 -face 58 -shape 367
+checkstatshape res_1 -solid 0 -shell 1 -face 58 -freewire 0 -freeedge 0 -sharededge 149
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.0004768443614 -avg 6.422994218e-005]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 1 -face 58 -shape 367 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 1 -face 58 -freewire 0 -freeedge 0 -sharededge 149 -max_solid 0 -max_shell 1 -max_face 58 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.0004768443614 -avg 6.422584066e-005 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj8_k1-ct-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 1 ) Summary = 0 ( 1 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 58 ( 58 ) Summary = 367 ( 367 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 58 ( 58 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 149 ( 149 )
-TOLERANCE : MaxTol = 0.0004768443614 ( 0.0004768443614 ) AvgTol = 6.422584066e-005 ( 6.422994218e-005 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = LIGHTSTEELBLUE1 ( LIGHTSTEELBLUE1 )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { LIGHTSTEELBLUE1 } -nbcolors 1 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 1 -face 58 -shape 367
+checkstatshape res_1 -solid 0 -shell 1 -face 58 -freewire 0 -freeedge 0 -sharededge 149
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.0004768443614 -avg 6.422994218e-005]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { LIGHTSTEELBLUE1 } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 1 -face 58 -shape 367 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 1 -face 58 -freewire 0 -freeedge 0 -sharededge 149 -max_solid 0 -max_shell 1 -max_face 58 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.0004768443614 -avg 6.422584066e-005 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj8_k1-pe-203.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 52 ( 52 ) Summary = 335 ( 335 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 52 ( 52 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 138 ( 138 )
-TOLERANCE : MaxTol = 0.005901949404 ( 0.008046615145 ) AvgTol = 0.0002996481595 ( 0.0008772134802 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 1 ( 1 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 1 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 1 -face 52 -shape 335
+checkstatshape res_1 -solid 0 -shell 1 -face 52 -freewire 0 -freeedge 0 -sharededge 138
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.008046615145 -avg 0.0008772134802]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 1 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 1 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 1 -face 52 -shape 335 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 1 -face 52 -freewire 0 -freeedge 0 -sharededge 138 -max_solid 0 -max_shell 1 -max_face 52 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.005901949404 -avg 0.0002996481595 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj8_k1-ug-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 9 ) Summary = 0 ( 9 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 44 ( 44 ) Face = 44 ( 44 ) Summary = 559 ( 559 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 44 ( 44 ) Face = 44 ( 44 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 217 ( 217 )
-TOLERANCE : MaxTol = 0.004260881238 ( 0.004260881238 ) AvgTol = 0.0001729387338 ( 0.0001739274842 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 44 ( 44 ) N2Labels = 0 ( 0 ) TotalLabels = 45 ( 45 ) NameLabels = 1 ( 1 ) ColorLabels = 44 ( 44 ) LayerLabels = 44 ( 44 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = GREEN ( GREEN )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 1 ( 1 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 9 -max_faults 0
+checkxstat D_First -n0 1 -n1 44 -n2 0 -total 45 -withname 1 -withcolor 44 -withlayer 44 -centroid 0 -volume 0 -area 0 -colors { GREEN } -nbcolors 1 -layers { 1 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 44 -face 44 -shape 559
+checkstatshape res_1 -solid 0 -shell 44 -face 44 -freewire 0 -freeedge 0 -sharededge 217
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.004260881238 -avg 0.0001739274842]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 9 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 44 -n2 0 -total 45 -withname 1 -withcolor 44 -withlayer 44 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 44 -n2 0 -total 45 -withname 1 -withcolor 44 -withlayer 44 -centroid 0 -volume 0 -area 0 -colors { GREEN } -nbcolors 1 -layers { 1 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 44 -face 44 -shape 559 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 44 -face 44 -freewire 0 -freeedge 0 -sharededge 217 -max_solid 0 -max_shell 44 -max_face 44 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.004260881238 -avg 0.0001729387338 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj9_ap209-td.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 1 ( 1 ) Summary = 1 ( 1 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 29 ( 29 ) Summary = 196 ( 196 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 29 ( 29 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 79 ( 79 )
-TOLERANCE : MaxTol = 0.008505837499 ( 0.008990884097 ) AvgTol = 0.0006165797526 ( 0.000651503134 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 29 -shape 196
+checkstatshape res_1 -solid 1 -shell 1 -face 29 -freewire 0 -freeedge 0 -sharededge 79
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.008990884097 -avg 0.000651503134]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 29 -shape 196 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 29 -freewire 0 -freeedge 0 -sharededge 79 -max_solid 1 -max_shell 1 -max_face 29 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.008505837499 -avg 0.0006165797526 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj9_b2-ug-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 4 ( 34 ) Summary = 4 ( 34 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 216 ( 216 ) Summary = 1421 ( 1421 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 216 ( 216 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 588 ( 588 )
-TOLERANCE : MaxTol = 0.007909701545 ( 0.01677199988 ) AvgTol = 0.0006487127928 ( 0.0008020095458 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 1 ( 1 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = INDIANRED1 ( INDIANRED1 )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 1 ( 1 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 34 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { INDIANRED1 } -nbcolors 1 -layers { 1 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 216 -shape 1421
+checkstatshape res_1 -solid 1 -shell 1 -face 216 -freewire 0 -freeedge 0 -sharededge 588
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.01677199988 -avg 0.0008020095458]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 34 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { INDIANRED1 } -nbcolors 1 -layers { 1 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 216 -shape 1421 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 216 -freewire 0 -freeedge 0 -sharededge 588 -max_solid 1 -max_shell 1 -max_face 216 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.007909701545 -avg 0.0006487127928 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename war1.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 5 ( 5 ) Summary = 5 ( 5 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 52 ( 52 ) Summary = 308 ( 308 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 52 ( 52 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 129 ( 129 )
-TOLERANCE : MaxTol = 0.09997634575 ( 0.1473689055 ) AvgTol = 0.03519057084 ( 0.04836161311 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 5 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 1 -face 52 -shape 308
+checkstatshape res_1 -solid 0 -shell 1 -face 52 -freewire 0 -freeedge 0 -sharededge 129
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.1473689055 -avg 0.04836161311]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 5 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 5 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 1 -face 52 -shape 308 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 1 -face 52 -freewire 0 -freeedge 0 -sharededge 129 -max_solid 0 -max_shell 1 -max_face 52 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.09997634575 -avg 0.03519057084 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename bm4_tc_eye.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 4 ( 5 ) Summary = 4 ( 5 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 86 ( 86 ) Summary = 496 ( 496 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 86 ( 86 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 207 ( 207 )
-TOLERANCE : MaxTol = 0.03778327122 ( 0.03778327122 ) AvgTol = 0.002071377746 ( 0.002086952024 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 1 ( 1 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = GRAY75 ( GRAY75 )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 001 ( 001 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 5 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { GRAY75 } -nbcolors 1 -layers { 001 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 86 -shape 496
+checkstatshape res_1 -solid 1 -shell 1 -face 86 -freewire 0 -freeedge 0 -sharededge 207
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.03778327122 -avg 0.002086952024]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 5 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { GRAY75 } -nbcolors 1 -layers { 001 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 86 -shape 496 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 86 -freewire 0 -freeedge 0 -sharededge 207 -max_solid 1 -max_shell 1 -max_face 86 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.03778327122 -avg 0.002071377746 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename bm4_ug_eye_a.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 78 ( 78 ) Summary = 456 ( 456 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 78 ( 78 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 191 ( 191 )
-TOLERANCE : MaxTol = 0.03540333048 ( 0.03540333048 ) AvgTol = 0.01419078581 ( 0.01419078581 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = MEDIUMSEAGREEN ( MEDIUMSEAGREEN )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { MEDIUMSEAGREEN } -nbcolors 1 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 78 -shape 456
+checkstatshape res_1 -solid 1 -shell 1 -face 78 -freewire 0 -freeedge 0 -sharededge 191
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.03540333048 -avg 0.01419078581]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { MEDIUMSEAGREEN } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 78 -shape 456 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 78 -freewire 0 -freeedge 0 -sharededge 191 -max_solid 1 -max_shell 1 -max_face 78 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.03540333048 -avg 0.01419078581 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename bm4_ug_eye_b.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 78 ( 78 ) Summary = 456 ( 456 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 78 ( 78 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 191 ( 191 )
-TOLERANCE : MaxTol = 0.0008779939056 ( 0.002970920499 ) AvgTol = 0.0002392657978 ( 0.0003764865332 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = MEDIUMSEAGREEN ( MEDIUMSEAGREEN )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { MEDIUMSEAGREEN } -nbcolors 1 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 78 -shape 456
+checkstatshape res_1 -solid 1 -shell 1 -face 78 -freewire 0 -freeedge 0 -sharededge 191
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.002970920499 -avg 0.0003764865332]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { MEDIUMSEAGREEN } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 78 -shape 456 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 78 -freewire 0 -freeedge 0 -sharededge 191 -max_solid 1 -max_shell 1 -max_face 78 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.0008779939056 -avg 0.0002392657978 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
-
set filename boot.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 3 ( 1 ) Summary = 3 ( 1 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 54 ( 54 ) Summary = 346 ( 346 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 54 ( 54 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 143 ( 143 )
-TOLERANCE : MaxTol = 0.0007675518072 ( 0.07502548071 ) AvgTol = 4.478132068e-005 ( 0.006388828005 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = GREEN ( GREEN )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { GREEN } -nbcolors 1 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 54 -shape 346
+checkstatshape res_1 -solid 1 -shell 1 -face 54 -freewire 0 -freeedge 0 -sharededge 143
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.07502548071 -avg 0.006388828005]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { GREEN } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 54 -shape 346 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 54 -freewire 0 -freeedge 0 -sharededge 143 -max_solid 1 -max_shell 1 -max_face 54 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.0007675518072 -avg 4.478132068e-005 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj10_b2-tu-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 34 ) Summary = 0 ( 34 )
-CHECKSHAPE : Wires = 1 ( 1 ) Faces = 1 ( 1 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 216 ( 216 ) Summary = 1421 ( 1421 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 216 ( 216 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 588 ( 588 )
-TOLERANCE : MaxTol = 0.0009115635861 ( 0.04372745817 ) AvgTol = 9.848185929e-005 ( 0.0009099184092 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 1 ( 1 )
-PROPS : Centroid = 1 ( 1 ) Volume = 1 ( 1 ) Area = 1 ( 1 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = INDIANRED1 ( INDIANRED1 )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 001 ( 001 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 34 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 1 -volume 1 -area 1 -colors { INDIANRED1 } -nbcolors 1 -layers { 001 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 1 -max_faces 1 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 216 -shape 1421
+checkstatshape res_1 -solid 1 -shell 1 -face 216 -freewire 0 -freeedge 0 -sharededge 588
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.04372745817 -avg 0.0009099184092]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 34 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 1 -volume 1 -area 1 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 1 -volume 1 -area 1 -colors { INDIANRED1 } -nbcolors 1 -layers { 001 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 1 -max_faces 1 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 1 -max_faces 1 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 216 -shape 1421 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 216 -freewire 0 -freeedge 0 -sharededge 588 -max_solid 1 -max_shell 1 -max_face 216 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.0009115635861 -avg 9.848185929e-005 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj10_b2-ug-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 4 ( 34 ) Summary = 4 ( 34 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 216 ( 216 ) Summary = 1421 ( 1421 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 216 ( 216 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 588 ( 588 )
-TOLERANCE : MaxTol = 0.007909701545 ( 0.01677199988 ) AvgTol = 0.0006487127928 ( 0.0008020095458 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 1 ( 1 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = INDIANRED1 ( INDIANRED1 )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 1 ( 1 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 34 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { INDIANRED1 } -nbcolors 1 -layers { 1 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 216 -shape 1421
+checkstatshape res_1 -solid 1 -shell 1 -face 216 -freewire 0 -freeedge 0 -sharededge 588
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.01677199988 -avg 0.0008020095458]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 34 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { INDIANRED1 } -nbcolors 1 -layers { 1 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 216 -shape 1421 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 216 -freewire 0 -freeedge 0 -sharededge 588 -max_solid 1 -max_shell 1 -max_face 216 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.007909701545 -avg 0.0006487127928 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj9_b2-tu-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 34 ) Summary = 0 ( 34 )
-CHECKSHAPE : Wires = 1 ( 1 ) Faces = 1 ( 1 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 216 ( 216 ) Summary = 1421 ( 1421 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 216 ( 216 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 588 ( 588 )
-TOLERANCE : MaxTol = 0.0009115635861 ( 0.04372745817 ) AvgTol = 9.848185929e-005 ( 0.0009099184092 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 1 ( 1 )
-PROPS : Centroid = 1 ( 1 ) Volume = 1 ( 1 ) Area = 1 ( 1 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = INDIANRED1 ( INDIANRED1 )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 001 ( 001 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 34 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 1 -volume 1 -area 1 -colors { INDIANRED1 } -nbcolors 1 -layers { 001 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 1 -max_faces 1 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 216 -shape 1421
+checkstatshape res_1 -solid 1 -shell 1 -face 216 -freewire 0 -freeedge 0 -sharededge 588
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.04372745817 -avg 0.0009099184092]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 34 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 1 -volume 1 -area 1 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 1 -volume 1 -area 1 -colors { INDIANRED1 } -nbcolors 1 -layers { 001 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 1 -max_faces 1 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 1 -max_faces 1 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 216 -shape 1421 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 216 -freewire 0 -freeedge 0 -sharededge 588 -max_solid 1 -max_shell 1 -max_face 216 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.0009115635861 -avg 9.848185929e-005 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj9_io1-sy-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 22 ( 22 ) Summary = 22 ( 22 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 26 ( 26 ) Summary = 176 ( 176 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 26 ( 26 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 64 ( 64 )
-TOLERANCE : MaxTol = 4.202081318e-005 ( 4.297688878e-005 ) AvgTol = 1.189202874e-005 ( 1.226209379e-005 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 1 ( 1 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = WHITE ( WHITE )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 0 ( { 0} )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 22 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { " 0" } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 26 -shape 176
+checkstatshape res_1 -solid 1 -shell 1 -face 26 -freewire 0 -freeedge 0 -sharededge 64
+set max_tol_res_1 [checkmaxtol res_1 -tol 4.297688878e-005 -avg 1.226209379e-005]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 22 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 22 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { 0 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 26 -shape 176 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 26 -freewire 0 -freeedge 0 -sharededge 64 -max_solid 1 -max_shell 1 -max_face 26 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 4.202081318e-005 -avg 1.189202874e-005 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
-
set filename ug_soapbox-A.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 8 ( 3 ) Summary = 8 ( 3 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 94 ( 94 ) Summary = 570 ( 570 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 94 ( 94 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 232 ( 232 )
-TOLERANCE : MaxTol = 0.008981237811 ( 0.03359184316 ) AvgTol = 0.001989925701 ( 0.00429652078 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = MAGENTA1 ( MAGENTA1 )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 3 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { MAGENTA1 } -nbcolors 1 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 94 -shape 570
+checkstatshape res_1 -solid 1 -shell 1 -face 94 -freewire 0 -freeedge 0 -sharededge 232
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.03359184316 -avg 0.00429652078]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 3 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { MAGENTA1 } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 94 -shape 570 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 94 -freewire 0 -freeedge 0 -sharededge 232 -max_solid 1 -max_shell 1 -max_face 94 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.008981237811 -avg 0.001989925701 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename bm2_db_lever-A.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 13 ( 13 ) Summary = 13 ( 13 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 70 ( 70 ) Summary = 444 ( 444 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 70 ( 70 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 182 ( 182 )
-TOLERANCE : MaxTol = 0.0001505408951 ( 0.0001811030214 ) AvgTol = 7.138967731e-006 ( 1.149095913e-005 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 1 ( 1 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = WHITE ( WHITE )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 0 ( { 0} )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 13 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { " 0" } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 70 -shape 444
+checkstatshape res_1 -solid 1 -shell 1 -face 70 -freewire 0 -freeedge 0 -sharededge 182
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.0001811030214 -avg 1.149095913e-005]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 13 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 13 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { 0 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 70 -shape 444 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 70 -freewire 0 -freeedge 0 -sharededge 182 -max_solid 1 -max_shell 1 -max_face 70 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.0001505408951 -avg 7.138967731e-006 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename bm2_db_lever-B.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 4 ( 4 ) Summary = 4 ( 4 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 70 ( 70 ) Summary = 444 ( 444 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 70 ( 70 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 182 ( 182 )
-TOLERANCE : MaxTol = 0.0001490576437 ( 0.0001490576437 ) AvgTol = 4.97348507e-006 ( 4.972284148e-006 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 1 ( 1 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = WHITE ( WHITE )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 0 ( { 0} )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { " 0" } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 70 -shape 444
+checkstatshape res_1 -solid 1 -shell 1 -face 70 -freewire 0 -freeedge 0 -sharededge 182
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.0001490576437 -avg 4.972284148e-006]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { 0 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 70 -shape 444 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 70 -freewire 0 -freeedge 0 -sharededge 182 -max_solid 1 -max_shell 1 -max_face 70 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.0001490576437 -avg 4.97348507e-006 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename bm2_db_lever-C.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 1 ) Summary = 0 ( 1 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 70 ( 70 ) Summary = 444 ( 444 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 70 ( 70 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 182 ( 182 )
-TOLERANCE : MaxTol = 0.0001490576437 ( 0.0001490576437 ) AvgTol = 5.158591514e-006 ( 5.158591552e-006 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 1 ( 1 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = WHITE ( WHITE )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 0 ( { 0} )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { " 0" } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 70 -shape 444
+checkstatshape res_1 -solid 1 -shell 1 -face 70 -freewire 0 -freeedge 0 -sharededge 182
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.0001490576437 -avg 5.158591552e-006]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { 0 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 70 -shape 444 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 70 -freewire 0 -freeedge 0 -sharededge 182 -max_solid 1 -max_shell 1 -max_face 70 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.0001490576437 -avg 5.158591514e-006 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename bm2_db_leverrod-A.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 15 ( 15 ) Summary = 15 ( 15 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 74 ( 74 ) Summary = 470 ( 470 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 74 ( 74 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 192 ( 192 )
-TOLERANCE : MaxTol = 0.005871972782 ( 0.01949436035 ) AvgTol = 0.000129196534 ( 0.0006695110365 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 1 ( 1 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = WHITE ( WHITE )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 0 ( { 0} )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 15 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { " 0" } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 74 -shape 470
+checkstatshape res_1 -solid 1 -shell 1 -face 74 -freewire 0 -freeedge 0 -sharededge 192
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.01949436035 -avg 0.0006695110365]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 15 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 15 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { 0 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 74 -shape 470 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 74 -freewire 0 -freeedge 0 -sharededge 192 -max_solid 1 -max_shell 1 -max_face 74 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.005871972782 -avg 0.000129196534 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
-
set filename bm2_db_leverrod-B.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 9 ( 4 ) Summary = 9 ( 4 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 74 ( 74 ) Summary = 470 ( 470 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 74 ( 74 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 192 ( 192 )
-TOLERANCE : MaxTol = 0.005871972782 ( 0.01255650011 ) AvgTol = 0.0001289836811 ( 0.0004682686404 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 1 ( 1 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = WHITE ( WHITE )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 0 ( { 0} )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { " 0" } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 74 -shape 470
+checkstatshape res_1 -solid 1 -shell 1 -face 74 -freewire 0 -freeedge 0 -sharededge 192
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.01255650011 -avg 0.0004682686404]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { 0 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 74 -shape 470 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 74 -freewire 0 -freeedge 0 -sharededge 192 -max_solid 1 -max_shell 1 -max_face 74 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.005871972782 -avg 0.0001289836811 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
-
set filename bm2_db_leverrod-C.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 5 ( 1 ) Summary = 5 ( 1 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 74 ( 74 ) Summary = 470 ( 470 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 74 ( 74 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 192 ( 192 )
-TOLERANCE : MaxTol = 0.005871972782 ( 0.01255650011 ) AvgTol = 0.0001291774461 ( 0.0004684624026 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 1 ( 1 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = WHITE ( WHITE )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 0 ( { 0} )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { " 0" } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 74 -shape 470
+checkstatshape res_1 -solid 1 -shell 1 -face 74 -freewire 0 -freeedge 0 -sharededge 192
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.01255650011 -avg 0.0004684624026]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { 0 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 74 -shape 470 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 74 -freewire 0 -freeedge 0 -sharededge 192 -max_solid 1 -max_shell 1 -max_face 74 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.005871972782 -avg 0.0001291774461 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename ro2.stp
-set ref_data {
-DATA : Faulties = 0 ( 1 ) Warnings = 0 ( 0 ) Summary = 0 ( 1 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 14 ( 14 ) Summary = 14 ( 14 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 2 ( 2 ) Face = 16 ( 16 ) Summary = 83 ( 83 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 2 ( 2 ) Face = 16 ( 16 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 32 ( 32 )
-TOLERANCE : MaxTol = 0.0002864345029 ( 0.0002929696768 ) AvgTol = 0.0001164141356 ( 0.0001176147358 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 1 ( 1 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = WHITE ( WHITE )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 0 ( { 0} )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 1
+checkdoc "tpstat c" -max_warns 14 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { " 0" } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 2 -face 16 -shape 83
+checkstatshape res_1 -solid 1 -shell 2 -face 16 -freewire 0 -freeedge 0 -sharededge 32
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.0002929696768 -avg 0.0001176147358]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 1
+checkdoc "tpstat c" -max_warns 14 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 14 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { 0 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 2 -face 16 -shape 83 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 2 -face 16 -freewire 0 -freeedge 0 -sharededge 32 -max_solid 1 -max_shell 2 -max_face 16 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.0002864345029 -avg 0.0001164141356 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename bm2_sy_exhaust-A.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 22 ) Summary = 0 ( 22 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 40 ( 40 ) Summary = 214 ( 214 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 40 ( 40 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 76 ( 76 )
-TOLERANCE : MaxTol = 8.89741187e-006 ( 1e-005 ) AvgTol = 1.595321488e-006 ( 4.970162944e-006 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 1 ( 1 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = LIGHTSEAGREEN ( LIGHTSEAGREEN )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 100 ( 100 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 22 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { LIGHTSEAGREEN } -nbcolors 1 -layers { 100 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 40 -shape 214
+checkstatshape res_1 -solid 1 -shell 1 -face 40 -freewire 0 -freeedge 0 -sharededge 76
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-005 -avg 4.970162944e-006]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 22 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { LIGHTSEAGREEN } -nbcolors 1 -layers { 100 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 40 -shape 214 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 40 -freewire 0 -freeedge 0 -sharededge 76 -max_solid 1 -max_shell 1 -max_face 40 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 8.89741187e-006 -avg 1.595321488e-006 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename bm2_sy_leverrod-A.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 7 ) Summary = 0 ( 7 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 52 ( 52 ) Summary = 346 ( 346 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 52 ( 52 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 140 ( 140 )
-TOLERANCE : MaxTol = 0.0002640504766 ( 0.0002640504766 ) AvgTol = 4.867332678e-006 ( 5.700981656e-006 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 1 ( 1 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = GOLD ( GOLD )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 10 ( 10 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 7 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { GOLD } -nbcolors 1 -layers { 10 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 52 -shape 346
+checkstatshape res_1 -solid 1 -shell 1 -face 52 -freewire 0 -freeedge 0 -sharededge 140
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.0002640504766 -avg 5.700981656e-006]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 7 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { GOLD } -nbcolors 1 -layers { 10 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 52 -shape 346 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 52 -freewire 0 -freeedge 0 -sharededge 140 -max_solid 1 -max_shell 1 -max_face 52 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.0002640504766 -avg 4.867332678e-006 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename bm4_ac_eye.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 99 ( 99 ) Summary = 613 ( 613 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 99 ( 99 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 257 ( 257 )
-TOLERANCE : MaxTol = 0.02282158358 ( 0.02282158358 ) AvgTol = 0.001795226534 ( 0.001824406504 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 1 ( 1 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = WHITE ( WHITE )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 0 ( 0 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { 0 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 99 -shape 613
+checkstatshape res_1 -solid 1 -shell 1 -face 99 -freewire 0 -freeedge 0 -sharededge 257
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.02282158358 -avg 0.001824406504]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { 0 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 99 -shape 613 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 99 -freewire 0 -freeedge 0 -sharededge 257 -max_solid 1 -max_shell 1 -max_face 99 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.02282158358 -avg 0.001795226534 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
-
-set ProductMode OFF
set filename BUC60809.stp
-set ref_data {
-DATA : Faulties = 0 ( 2 ) Warnings = 0 ( 0 ) Summary = 0 ( 2 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 51 ( 9 ) Summary = 51 ( 9 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 15 ( 15 ) Shell = 16 ( 16 ) Face = 159 ( 159 ) Summary = 890 ( 890 )
-STATSHAPE : Solid = 15 ( 15 ) Shell = 16 ( 16 ) Face = 159 ( 159 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 342 ( 342 )
-TOLERANCE : MaxTol = 7.482128955e-07 ( 1e-05 ) AvgTol = 1.53886857e-07 ( 5.228475349e-07 )
-LABELS : N0Labels = 15 ( 15 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 15 ( 15 ) NameLabels = 15 ( 15 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename} -productmode 0
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 2
+checkdoc "tpstat c" -max_warns 9 -max_faults 0
+checkxstat D_First -n0 15 -n1 0 -n2 0 -total 15 -withname 15 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 15 -shell 16 -face 159 -shape 890
+checkstatshape res_1 -solid 15 -shell 16 -face 159 -freewire 0 -freeedge 0 -sharededge 342
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-05 -avg 5.228475349e-07]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 2
+checkdoc "tpstat c" -max_warns 9 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 51 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 15 -n1 0 -n2 0 -total 15 -withname 15 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 15 -n1 0 -n2 0 -total 15 -withname 15 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 15 -shell 16 -face 159 -shape 890 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 15 -shell 16 -face 159 -freewire 0 -freeedge 0 -sharededge 342 -max_solid 15 -max_shell 16 -max_face 159 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 7.482128955e-07 -avg 1.53886857e-07 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename mat.stp
-set ref_data {
-DATA : Faulties = 0 ( 200 ) Warnings = 0 ( 0 ) Summary = 0 ( 200 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 0 ( 0 ) Summary = 14 ( 14 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 0 ( 0 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 0 ( 0 )
-TOLERANCE : MaxTol = 0 ( 0 ) AvgTol = 0 ( 0 )
-LABELS : N0Labels = 14 ( 14 ) N1Labels = 19 ( 19 ) N2Labels = 0 ( 0 ) TotalLabels = 33 ( 33 ) NameLabels = 33 ( 33 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 200
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 14 -n1 19 -n2 0 -total 33 -withname 33 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 0 -shape 14
+checkstatshape res_1 -solid 0 -shell 0 -face 0 -freewire 0 -freeedge 0 -sharededge 0
+set max_tol_res_1 [checkmaxtol res_1 -tol 0 -avg 0]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 200
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 14 -n1 19 -n2 0 -total 33 -withname 33 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 14 -n1 19 -n2 0 -total 33 -withname 33 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 0 -face 0 -shape 14 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 0 -freewire 0 -freeedge 0 -sharededge 0 -max_solid 0 -max_shell 0 -max_face 0 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0 -avg 0 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename OCC22238_test.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 2 ) Summary = 0 ( 2 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 1 ( 1 ) Summary = 45 ( 35 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 1 ( 1 ) FreeWire = 0 ( 0 ) FreeEdge = 8 ( 8 ) SharedEdge = 10 ( 10 )
-TOLERANCE : MaxTol = 1.00005e-007 ( 1.00005e-007 ) AvgTol = 1.000009091e-007 ( 1.000009091e-007 )
-LABELS : N0Labels = 5 ( 5 ) N1Labels = 4 ( 4 ) N2Labels = 0 ( 0 ) TotalLabels = 9 ( 9 ) NameLabels = 9 ( 9 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+checkxstat D_First -n0 5 -n1 4 -n2 0 -total 9 -withname 9 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 1 -face 1 -shape 35
+checkstatshape res_1 -solid 0 -shell 1 -face 1 -freewire 0 -freeedge 8 -sharededge 10
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.00005e-007 -avg 1.000009091e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 5 -n1 4 -n2 0 -total 9 -withname 9 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 5 -n1 4 -n2 0 -total 9 -withname 9 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 1 -face 1 -shape 45 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 1 -face 1 -freewire 0 -freeedge 8 -sharededge 10 -max_solid 0 -max_shell 1 -max_face 1 -max_freewire 0 -max_freeedge 8
+checkmaxtol res_2 -tol 1.00005e-007 -avg 1.000009091e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
-
-set ProductMode OFF
set filename PRO20361-1.stp
-set ref_data {
-DATA : Faulties = 0 ( 4 ) Warnings = 0 ( 0 ) Summary = 0 ( 4 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 1 ( 4 ) Summary = 1 ( 4 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 1 ( 1 ) Summary = 7 ( 7 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 1 ( 1 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 2 ( 2 )
-TOLERANCE : MaxTol = 1e-07 ( 1e-07 ) AvgTol = 1e-07 ( 1e-07 )
-LABELS : N0Labels = 1 ( 2 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 2 ) NameLabels = 1 ( 2 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename} -productmode 0
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 4
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+checkxstat D_First -n0 2 -n1 0 -n2 0 -total 2 -withname 2 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 1 -shape 7
+checkstatshape res_1 -solid 1 -shell 1 -face 1 -freewire 0 -freeedge 0 -sharededge 2
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-07 -avg 1e-07]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 4
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 2 -n1 0 -n2 0 -total 2 -withname 2 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 1 -shape 7 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 1 -freewire 0 -freeedge 0 -sharededge 2 -max_solid 1 -max_shell 1 -max_face 1 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1e-07 -avg 1e-07 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
-
-set ProductMode OFF
set filename PRO20361-3.stp
-set ref_data {
-DATA : Faulties = 0 ( 4 ) Warnings = 0 ( 0 ) Summary = 0 ( 4 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 3 ) Summary = 0 ( 3 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 6 ( 6 ) Summary = 34 ( 34 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 6 ( 6 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 12 ( 12 )
-TOLERANCE : MaxTol = 1.00005e-07 ( 1.00005e-07 ) AvgTol = 1.000041026e-07 ( 1.000041026e-07 )
-LABELS : N0Labels = 1 ( 2 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 2 ) NameLabels = 1 ( 2 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename} -productmode 0
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 4
+checkdoc "tpstat c" -max_warns 3 -max_faults 0
+checkxstat D_First -n0 2 -n1 0 -n2 0 -total 2 -withname 2 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 6 -shape 34
+checkstatshape res_1 -solid 1 -shell 1 -face 6 -freewire 0 -freeedge 0 -sharededge 12
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.00005e-07 -avg 1.000041026e-07]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 4
+checkdoc "tpstat c" -max_warns 3 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 2 -n1 0 -n2 0 -total 2 -withname 2 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 6 -shape 34 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 6 -freewire 0 -freeedge 0 -sharededge 12 -max_solid 1 -max_shell 1 -max_face 6 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.00005e-07 -avg 1.000041026e-07 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename ass-test1.stp
-set ref_data {
-DATA : Faulties = 0 ( 85 ) Warnings = 0 ( 0 ) Summary = 0 ( 85 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 2 ( 2 ) Shell = 2 ( 2 ) Face = 41 ( 41 ) Summary = 272 ( 272 )
-STATSHAPE : Solid = 9 ( 9 ) Shell = 9 ( 9 ) Face = 223 ( 223 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 111 ( 111 )
-TOLERANCE : MaxTol = 1e-07 ( 1e-07 ) AvgTol = 1e-07 ( 1e-07 )
-LABELS : N0Labels = 3 ( 3 ) N1Labels = 9 ( 9 ) N2Labels = 0 ( 0 ) TotalLabels = 12 ( 12 ) NameLabels = 12 ( 12 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 85
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 3 -n1 9 -n2 0 -total 12 -withname 12 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 2 -shell 2 -face 41 -shape 272
+checkstatshape res_1 -solid 9 -shell 9 -face 223 -freewire 0 -freeedge 0 -sharededge 111
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-07 -avg 1e-07]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 85
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3 -n1 9 -n2 0 -total 12 -withname 12 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 9 -n2 0 -total 12 -withname 12 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 2 -shell 2 -face 41 -shape 272 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 9 -shell 9 -face 223 -freewire 0 -freeedge 0 -sharededge 111 -max_solid 9 -max_shell 9 -max_face 223 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1e-07 -avg 1e-07 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
-
-set ProductMode OFF
set filename tr8_as_sd_sw.stp
-set ref_data {
-DATA : Faulties = 0 ( 3 ) Warnings = 0 ( 5 ) Summary = 0 ( 8 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 1 ) Summary = 0 ( 1 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 2 ( 2 ) Shell = 2 ( 2 ) Face = 15 ( 15 ) Summary = 88 ( 88 )
-STATSHAPE : Solid = 2 ( 2 ) Shell = 2 ( 2 ) Face = 15 ( 15 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 30 ( 30 )
-TOLERANCE : MaxTol = 1.000100003e-07 ( 1.000100003e-07 ) AvgTol = 1.000061539e-07 ( 1.000061539e-07 )
-LABELS : N0Labels = 3 ( 3 ) N1Labels = 2 ( 2 ) N2Labels = 0 ( 0 ) TotalLabels = 5 ( 5 ) NameLabels = 5 ( 4 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename} -productmode 0
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 5 -max_faults 3
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+checkxstat D_First -n0 3 -n1 2 -n2 0 -total 5 -withname 4 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 2 -shell 2 -face 15 -shape 88
+checkstatshape res_1 -solid 2 -shell 2 -face 15 -freewire 0 -freeedge 0 -sharededge 30
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-07 -avg 1.000061539e-07]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 5 -max_faults 3
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3 -n1 2 -n2 0 -total 5 -withname 4 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 2 -shell 2 -face 15 -shape 88 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 2 -shell 2 -face 15 -freewire 0 -freeedge 0 -sharededge 30 -max_solid 2 -max_shell 2 -max_face 15 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-07 -avg 1.000061539e-07 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: STATSHAPE : Faulty"
-
set filename tr8_ha1_ac.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 2 ( 1 ) Face = 7 ( 7 ) Summary = 47 ( 47 )
-STATSHAPE : Solid = 2 ( 2 ) Shell = 4 ( 2 ) Face = 14 ( 14 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 16 ( 16 )
-TOLERANCE : MaxTol = 1e-007 ( 1e-007 ) AvgTol = 1e-007 ( 1e-007 )
-LABELS : N0Labels = 4 ( 4 ) N1Labels = 4 ( 4 ) N2Labels = 0 ( 0 ) TotalLabels = 8 ( 8 ) NameLabels = 8 ( 8 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 4 -n1 4 -n2 0 -total 8 -withname 8 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 7 -shape 47
+checkstatshape res_1 -solid 2 -shell 2 -face 14 -freewire 0 -freeedge 0 -sharededge 16
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-007 -avg 1e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 4 -n1 4 -n2 0 -total 8 -withname 8 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 4 -n1 4 -n2 0 -total 8 -withname 8 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 2 -face 7 -shape 47 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 2 -shell 4 -face 14 -freewire 0 -freeedge 0 -sharededge 16 -max_solid 2 -max_shell 2 -max_face 14 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1e-007 -avg 1e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: STATSHAPE : Faulty"
-
set filename tr8_ha1_ug.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 2 ( 1 ) Face = 7 ( 7 ) Summary = 47 ( 47 )
-STATSHAPE : Solid = 2 ( 2 ) Shell = 4 ( 2 ) Face = 14 ( 14 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 16 ( 16 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1.000100003e-007 ) AvgTol = 1.000085716e-007 ( 1.000085716e-007 )
-LABELS : N0Labels = 4 ( 4 ) N1Labels = 5 ( 5 ) N2Labels = 0 ( 0 ) TotalLabels = 9 ( 9 ) NameLabels = 8 ( 8 ) ColorLabels = 2 ( 2 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = CYAN1 GREEN ( CYAN1 GREEN )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 4 -n1 5 -n2 0 -total 9 -withname 8 -withcolor 2 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { CYAN1 GREEN } -nbcolors 2 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 7 -shape 47
+checkstatshape res_1 -solid 2 -shell 2 -face 14 -freewire 0 -freeedge 0 -sharededge 16
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-007 -avg 1.000085716e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 4 -n1 5 -n2 0 -total 9 -withname 8 -withcolor 2 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 2 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 4 -n1 5 -n2 0 -total 9 -withname 8 -withcolor 2 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { CYAN1 GREEN } -nbcolors 2 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 2 -face 7 -shape 47 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 2 -shell 4 -face 14 -freewire 0 -freeedge 0 -sharededge 16 -max_solid 2 -max_shell 2 -max_face 14 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.000085716e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename trj7_c2-ct-203.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 1 ( 1 ) Summary = 16 ( 16 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 1 ( 1 ) FreeWire = 0 ( 0 ) FreeEdge = 1 ( 1 ) SharedEdge = 5 ( 5 )
-TOLERANCE : MaxTol = 1.00005e-007 ( 1.00005e-007 ) AvgTol = 1.0000375e-007 ( 1.0000375e-007 )
-LABELS : N0Labels = 3 ( 3 ) N1Labels = 2 ( 3 ) N2Labels = 0 ( 0 ) TotalLabels = 5 ( 6 ) NameLabels = 5 ( 5 ) ColorLabels = 2 ( 2 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = BLUE1 MAGENTA1 ( BLUE1 MAGENTA1 )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 3 -n1 3 -n2 0 -total 6 -withname 5 -withcolor 2 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 MAGENTA1 } -nbcolors 2 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 1 -face 1 -shape 16
+checkstatshape res_1 -solid 0 -shell 1 -face 1 -freewire 0 -freeedge 1 -sharededge 5
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.00005e-007 -avg 1.0000375e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3 -n1 3 -n2 0 -total 6 -withname 5 -withcolor 2 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 2 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 2 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 MAGENTA1 } -nbcolors 2 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 1 -face 1 -shape 16 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 1 -face 1 -freewire 0 -freeedge 1 -sharededge 5 -max_solid 0 -max_shell 1 -max_face 1 -max_freewire 0 -max_freeedge 1
+checkmaxtol res_2 -tol 1.00005e-007 -avg 1.0000375e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: STATSHAPE : Faulty"
-
set filename trj7_c2-al-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 1 ( 0 ) Face = 1 ( 1 ) Summary = 16 ( 14 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 1 ( 0 ) Face = 1 ( 1 ) FreeWire = 0 ( 0 ) FreeEdge = 1 ( 1 ) SharedEdge = 5 ( 5 )
-TOLERANCE : MaxTol = 1e-007 ( 1e-007 ) AvgTol = 1e-007 ( 1e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 1 ( 1 ) N2Labels = 0 ( 0 ) TotalLabels = 2 ( 2 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = MIDNIGHTBLUE ( MIDNIGHTBLUE )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 1 -n2 0 -total 2 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { MIDNIGHTBLUE } -nbcolors 1 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 1 -shape 14
+checkstatshape res_1 -solid 0 -shell 0 -face 1 -freewire 0 -freeedge 1 -sharededge 5
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-007 -avg 1e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 1 -n2 0 -total 2 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 1 -n2 0 -total 2 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { MIDNIGHTBLUE } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 1 -face 1 -shape 16 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 1 -face 1 -freewire 0 -freeedge 1 -sharededge 5 -max_solid 0 -max_shell 0 -max_face 1 -max_freewire 0 -max_freeedge 1
+checkmaxtol res_2 -tol 1e-007 -avg 1e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename CEA_cuve-V5.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 0 ( 0 ) Summary = 2 ( 2 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 0 ( 0 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 0 ( 0 )
-TOLERANCE : MaxTol = 0 ( 0 ) AvgTol = 0 ( 0 )
-LABELS : N0Labels = 2 ( 2 ) N1Labels = 1 ( 3 ) N2Labels = 0 ( 2 ) TotalLabels = 3 ( 7 ) NameLabels = 3 ( 4 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 2 -n1 3 -n2 2 -total 7 -withname 4 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 0 -shape 2
+checkstatshape res_1 -solid 0 -shell 0 -face 0 -freewire 0 -freeedge 0 -sharededge 0
+set max_tol_res_1 [checkmaxtol res_1 -tol 0 -avg 0]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 2 -n1 3 -n2 2 -total 7 -withname 4 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 2 -n1 1 -n2 0 -total 3 -withname 3 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 0 -face 0 -shape 2 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 0 -freewire 0 -freeedge 0 -sharededge 0 -max_solid 0 -max_shell 0 -max_face 0 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0 -avg 0 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename trj7_c2-ct-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 1 ( 1 ) Summary = 16 ( 16 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 1 ( 1 ) FreeWire = 0 ( 0 ) FreeEdge = 1 ( 1 ) SharedEdge = 5 ( 5 )
-TOLERANCE : MaxTol = 1.00005e-007 ( 1.00005e-007 ) AvgTol = 1.0000375e-007 ( 1.0000375e-007 )
-LABELS : N0Labels = 3 ( 3 ) N1Labels = 2 ( 3 ) N2Labels = 0 ( 0 ) TotalLabels = 5 ( 6 ) NameLabels = 5 ( 5 ) ColorLabels = 2 ( 2 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = BLUE1 MAGENTA1 ( BLUE1 MAGENTA1 )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 3 -n1 3 -n2 0 -total 6 -withname 5 -withcolor 2 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 MAGENTA1 } -nbcolors 2 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 1 -face 1 -shape 16
+checkstatshape res_1 -solid 0 -shell 1 -face 1 -freewire 0 -freeedge 1 -sharededge 5
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.00005e-007 -avg 1.0000375e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3 -n1 3 -n2 0 -total 6 -withname 5 -withcolor 2 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 2 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 2 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 MAGENTA1 } -nbcolors 2 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 1 -face 1 -shape 16 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 1 -face 1 -freewire 0 -freeedge 1 -sharededge 5 -max_solid 0 -max_shell 1 -max_face 1 -max_freewire 0 -max_freeedge 1
+checkmaxtol res_2 -tol 1.00005e-007 -avg 1.0000375e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: STATSHAPE : Faulty"
-
set filename trj7_c2-db-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 1 ( 0 ) Face = 1 ( 1 ) Summary = 16 ( 14 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 1 ( 0 ) Face = 1 ( 1 ) FreeWire = 0 ( 0 ) FreeEdge = 1 ( 1 ) SharedEdge = 5 ( 5 )
-TOLERANCE : MaxTol = 1e-007 ( 1e-007 ) AvgTol = 1e-007 ( 1e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 2 ( 2 ) N2Labels = 0 ( 0 ) TotalLabels = 3 ( 3 ) NameLabels = 1 ( 1 ) ColorLabels = 2 ( 2 ) LayerLabels = 2 ( 2 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = DODGERBLUE2 GREEN ( DODGERBLUE2 GREEN )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 0 ( { 0} )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 2 -n2 0 -total 3 -withname 1 -withcolor 2 -withlayer 2 -centroid 0 -volume 0 -area 0 -colors { DODGERBLUE2 GREEN } -nbcolors 2 -layers { " 0" } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 1 -shape 14
+checkstatshape res_1 -solid 0 -shell 0 -face 1 -freewire 0 -freeedge 1 -sharededge 5
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-007 -avg 1e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 2 -n2 0 -total 3 -withname 1 -withcolor 2 -withlayer 2 -centroid 0 -volume 0 -area 0 -nbcolors 2 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 2 -n2 0 -total 3 -withname 1 -withcolor 2 -withlayer 2 -centroid 0 -volume 0 -area 0 -colors { DODGERBLUE2 GREEN } -nbcolors 2 -layers { 0 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 1 -face 1 -shape 16 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 1 -face 1 -freewire 0 -freeedge 1 -sharededge 5 -max_solid 0 -max_shell 0 -max_face 1 -max_freewire 0 -max_freeedge 1
+checkmaxtol res_2 -tol 1e-007 -avg 1e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename trj7_c2-id-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 1 ( 1 ) Summary = 16 ( 16 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 1 ( 1 ) FreeWire = 0 ( 0 ) FreeEdge = 1 ( 1 ) SharedEdge = 5 ( 5 )
-TOLERANCE : MaxTol = 1e-007 ( 1e-007 ) AvgTol = 1e-007 ( 1e-007 )
-LABELS : N0Labels = 3 ( 3 ) N1Labels = 2 ( 3 ) N2Labels = 0 ( 0 ) TotalLabels = 5 ( 6 ) NameLabels = 5 ( 5 ) ColorLabels = 2 ( 2 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = BLUE1 MAGENTA1 ( BLUE1 MAGENTA1 )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 3 -n1 3 -n2 0 -total 6 -withname 5 -withcolor 2 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 MAGENTA1 } -nbcolors 2 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 1 -face 1 -shape 16
+checkstatshape res_1 -solid 0 -shell 1 -face 1 -freewire 0 -freeedge 1 -sharededge 5
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-007 -avg 1e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3 -n1 3 -n2 0 -total 6 -withname 5 -withcolor 2 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 2 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 2 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 MAGENTA1 } -nbcolors 2 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 1 -face 1 -shape 16 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 1 -face 1 -freewire 0 -freeedge 1 -sharededge 5 -max_solid 0 -max_shell 1 -max_face 1 -max_freewire 0 -max_freeedge 1
+checkmaxtol res_2 -tol 1e-007 -avg 1e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: NBSHAPES : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename trj7_c2-pe-203.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 1 ) Summary = 0 ( 1 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 1 ( 1 ) Summary = 16 ( 17 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 1 ( 1 ) FreeWire = 0 ( 1 ) FreeEdge = 1 ( 1 ) SharedEdge = 5 ( 5 )
-TOLERANCE : MaxTol = 1.00005e-007 ( 1.00005e-007 ) AvgTol = 1.0000375e-007 ( 1.0000375e-007 )
-LABELS : N0Labels = 3 ( 3 ) N1Labels = 3 ( 4 ) N2Labels = 0 ( 0 ) TotalLabels = 6 ( 7 ) NameLabels = 5 ( 5 ) ColorLabels = 2 ( 2 ) LayerLabels = 2 ( 2 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 1 ( 1 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = BLUE1 YELLOW ( BLUE1 YELLOW )
-NLAYERS : NLayers = 2 ( 2 )
-LAYERS : Layers = 03___PRT_ALL_CURVES 06___PRT_ALL_SURFS ( 03___PRT_ALL_CURVES 06___PRT_ALL_SURFS )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+checkxstat D_First -n0 3 -n1 4 -n2 0 -total 7 -withname 5 -withcolor 2 -withlayer 2 -centroid 0 -volume 0 -area 1 -colors { BLUE1 YELLOW } -nbcolors 2 -layers { "03___PRT_ALL_CURVES" "06___PRT_ALL_SURFS" } -nblayers 2
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 1 -face 1 -shape 17
+checkstatshape res_1 -solid 0 -shell 1 -face 1 -freewire 1 -freeedge 1 -sharededge 5
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.00005e-007 -avg 1.0000375e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3 -n1 4 -n2 0 -total 7 -withname 5 -withcolor 2 -withlayer 2 -centroid 0 -volume 0 -area 1 -nbcolors 2 -nblayers 2
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 3 -n2 0 -total 6 -withname 5 -withcolor 2 -withlayer 2 -centroid 0 -volume 0 -area 1 -colors { BLUE1 YELLOW } -nbcolors 2 -layers { "03___PRT_ALL_CURVES" "06___PRT_ALL_SURFS" } -nblayers 2
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 1 -face 1 -shape 16 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 1 -face 1 -freewire 0 -freeedge 1 -sharededge 5 -max_solid 0 -max_shell 1 -max_face 1 -max_freewire 1 -max_freeedge 1
+checkmaxtol res_2 -tol 1.00005e-007 -avg 1.0000375e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename trj7_c2-tc-203.stp
-set ref_data {
-DATA : Faulties = 0 ( 10 ) Warnings = 0 ( 0 ) Summary = 0 ( 10 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 2 ) Summary = 0 ( 2 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 1 ( 1 ) Summary = 28 ( 28 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 1 ( 1 ) FreeWire = 0 ( 0 ) FreeEdge = 1 ( 1 ) SharedEdge = 11 ( 11 )
-TOLERANCE : MaxTol = 1.00005e-07 ( 1.00005e-07 ) AvgTol = 1.000044118e-07 ( 1.000044118e-07 )
-LABELS : N0Labels = 3 ( 3 ) N1Labels = 2 ( 3 ) N2Labels = 0 ( 0 ) TotalLabels = 5 ( 6 ) NameLabels = 5 ( 5 ) ColorLabels = 2 ( 2 ) LayerLabels = 1 ( 1 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = BLUE4 DARKORANGE ( BLUE4 DARKORANGE )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 005 ( 005 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 10
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+checkxstat D_First -n0 3 -n1 3 -n2 0 -total 6 -withname 5 -withcolor 2 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { BLUE4 DARKORANGE } -nbcolors 2 -layers { 005 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 1 -face 1 -shape 28
+checkstatshape res_1 -solid 0 -shell 1 -face 1 -freewire 0 -freeedge 1 -sharededge 11
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.00005e-07 -avg 1.000044118e-07]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 10
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3 -n1 3 -n2 0 -total 6 -withname 5 -withcolor 2 -withlayer 1 -centroid 0 -volume 0 -area 0 -nbcolors 2 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 2 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { BLUE4 DARKORANGE } -nbcolors 2 -layers { 005 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 1 -face 1 -shape 28 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 1 -face 1 -freewire 0 -freeedge 1 -sharededge 11 -max_solid 0 -max_shell 1 -max_face 1 -max_freewire 0 -max_freeedge 1
+checkmaxtol res_2 -tol 1.00005e-07 -avg 1.000044118e-07 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: STATSHAPE : Faulty"
-
set filename trj7_c2-td-203.stp
-set ref_data {
-DATA : Faulties = 0 ( 12 ) Warnings = 0 ( 0 ) Summary = 0 ( 12 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 2 ) Summary = 0 ( 2 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 4 ( 0 ) Face = 4 ( 4 ) Summary = 127 ( 103 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 4 ( 0 ) Face = 4 ( 4 ) FreeWire = 0 ( 0 ) FreeEdge = 20 ( 20 ) SharedEdge = 36 ( 36 )
-TOLERANCE : MaxTol = 1e-07 ( 1e-07 ) AvgTol = 1e-07 ( 1e-07 )
-LABELS : N0Labels = 3 ( 3 ) N1Labels = 26 ( 26 ) N2Labels = 0 ( 0 ) TotalLabels = 29 ( 29 ) NameLabels = 5 ( 5 ) ColorLabels = 24 ( 24 ) LayerLabels = 4 ( 4 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 7 ( 7 )
-COLORS : Colors = CYAN1 GOLD3 GREEN GREEN4 MAGENTA1 MAGENTA3 YELLOW ( CYAN1 GOLD3 GREEN GREEN4 MAGENTA1 MAGENTA3 YELLOW )
-NLAYERS : NLayers = 4 ( 4 )
-LAYERS : Layers = 001 002 003 004 ( 001 002 003 004 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 12
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+checkxstat D_First -n0 3 -n1 26 -n2 0 -total 29 -withname 5 -withcolor 24 -withlayer 4 -centroid 0 -volume 0 -area 0 -colors { CYAN1 GOLD3 GREEN GREEN4 MAGENTA1 MAGENTA3 YELLOW } -nbcolors 7 -layers { 001 002 003 004 } -nblayers 4
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 4 -shape 103
+checkstatshape res_1 -solid 0 -shell 0 -face 4 -freewire 0 -freeedge 20 -sharededge 36
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-07 -avg 1e-07]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 12
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3 -n1 26 -n2 0 -total 29 -withname 5 -withcolor 24 -withlayer 4 -centroid 0 -volume 0 -area 0 -nbcolors 7 -nblayers 4
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 26 -n2 0 -total 29 -withname 5 -withcolor 24 -withlayer 4 -centroid 0 -volume 0 -area 0 -colors { CYAN1 GOLD3 GREEN GREEN4 MAGENTA1 MAGENTA3 YELLOW } -nbcolors 7 -layers { 001 002 003 004 } -nblayers 4
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 4 -face 4 -shape 127 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 4 -face 4 -freewire 0 -freeedge 20 -sharededge 36 -max_solid 0 -max_shell 0 -max_face 4 -max_freewire 0 -max_freeedge 20
+checkmaxtol res_2 -tol 1e-07 -avg 1e-07 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: NBSHAPES : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename trj7_c2-pe-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 18 ) Warnings = 0 ( 0 ) Summary = 0 ( 18 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 1 ) Summary = 0 ( 1 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 1 ( 1 ) Summary = 16 ( 17 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 1 ( 1 ) FreeWire = 0 ( 1 ) FreeEdge = 1 ( 1 ) SharedEdge = 5 ( 5 )
-TOLERANCE : MaxTol = 1.00005e-07 ( 1.00005e-07 ) AvgTol = 1.0000375e-07 ( 1.0000375e-07 )
-LABELS : N0Labels = 3 ( 3 ) N1Labels = 3 ( 4 ) N2Labels = 0 ( 0 ) TotalLabels = 6 ( 7 ) NameLabels = 5 ( 5 ) ColorLabels = 2 ( 2 ) LayerLabels = 2 ( 2 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 1 ( 1 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = BLUE1 YELLOW ( BLUE1 YELLOW )
-NLAYERS : NLayers = 2 ( 2 )
-LAYERS : Layers = 03___PRT_ALL_CURVES 06___PRT_ALL_SURFS ( 03___PRT_ALL_CURVES 06___PRT_ALL_SURFS )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 18
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+checkxstat D_First -n0 3 -n1 4 -n2 0 -total 7 -withname 5 -withcolor 2 -withlayer 2 -centroid 0 -volume 0 -area 1 -colors { BLUE1 YELLOW } -nbcolors 2 -layers { "03___PRT_ALL_CURVES" "06___PRT_ALL_SURFS" } -nblayers 2
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 1 -face 1 -shape 17
+checkstatshape res_1 -solid 0 -shell 1 -face 1 -freewire 1 -freeedge 1 -sharededge 5
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.00005e-07 -avg 1.0000375e-07]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 18
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3 -n1 4 -n2 0 -total 7 -withname 5 -withcolor 2 -withlayer 2 -centroid 0 -volume 0 -area 1 -nbcolors 2 -nblayers 2
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 3 -n2 0 -total 6 -withname 5 -withcolor 2 -withlayer 2 -centroid 0 -volume 0 -area 1 -colors { BLUE1 YELLOW } -nbcolors 2 -layers { "03___PRT_ALL_CURVES" "06___PRT_ALL_SURFS" } -nblayers 2
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 1 -face 1 -shape 16 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 1 -face 1 -freewire 0 -freeedge 1 -sharededge 5 -max_solid 0 -max_shell 1 -max_face 1 -max_freewire 1 -max_freeedge 1
+checkmaxtol res_2 -tol 1.00005e-07 -avg 1.0000375e-07 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename trj9_c2-tu-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 7 ) Warnings = 0 ( 0 ) Summary = 0 ( 7 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 1 ) Summary = 0 ( 1 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 1 ( 1 ) Summary = 28 ( 28 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 1 ( 1 ) FreeWire = 0 ( 0 ) FreeEdge = 1 ( 1 ) SharedEdge = 11 ( 11 )
-TOLERANCE : MaxTol = 1.00005e-07 ( 1.00005e-07 ) AvgTol = 1.000044118e-07 ( 1.000044118e-07 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 2 ( 3 ) N2Labels = 0 ( 0 ) TotalLabels = 3 ( 4 ) NameLabels = 1 ( 1 ) ColorLabels = 2 ( 2 ) LayerLabels = 2 ( 2 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = DARKORANGE1 INDIANRED1 ( DARKORANGE1 INDIANRED1 )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 001 ( 001 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 7
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+checkxstat D_First -n0 1 -n1 3 -n2 0 -total 4 -withname 1 -withcolor 2 -withlayer 2 -centroid 0 -volume 0 -area 0 -colors { DARKORANGE1 INDIANRED1 } -nbcolors 2 -layers { 001 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 1 -face 1 -shape 28
+checkstatshape res_1 -solid 0 -shell 1 -face 1 -freewire 0 -freeedge 1 -sharededge 11
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.00005e-07 -avg 1.000044118e-07]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 7
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 3 -n2 0 -total 4 -withname 1 -withcolor 2 -withlayer 2 -centroid 0 -volume 0 -area 0 -nbcolors 2 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 2 -n2 0 -total 3 -withname 1 -withcolor 2 -withlayer 2 -centroid 0 -volume 0 -area 0 -colors { DARKORANGE1 INDIANRED1 } -nbcolors 2 -layers { 001 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 1 -face 1 -shape 28 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 1 -face 1 -freewire 0 -freeedge 1 -sharededge 11 -max_solid 0 -max_shell 1 -max_face 1 -max_freewire 0 -max_freeedge 1
+checkmaxtol res_2 -tol 1.00005e-07 -avg 1.000044118e-07 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename ct_as1-A.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 14 ) Summary = 0 ( 14 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 5 ( 5 ) Shell = 5 ( 5 ) Face = 53 ( 53 ) Summary = 366 ( 366 )
-STATSHAPE : Solid = 12 ( 12 ) Shell = 12 ( 12 ) Face = 112 ( 112 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 126 ( 126 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1.000100003e-007 ) AvgTol = 1.000055896e-007 ( 1.000055896e-007 )
-LABELS : N0Labels = 7 ( 7 ) N1Labels = 13 ( 28 ) N2Labels = 0 ( 0 ) TotalLabels = 20 ( 35 ) NameLabels = 20 ( 20 ) ColorLabels = 5 ( 5 ) LayerLabels = 5 ( 20 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = VIOLET ( VIOLET )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 1 ( 1 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 6 -max_faults 0
+checkdoc "tpstat c" -max_warns 14 -max_faults 0
+checkxstat D_First -n0 7 -n1 28 -n2 0 -total 35 -withname 20 -withcolor 5 -withlayer 20 -centroid 0 -volume 0 -area 0 -colors { VIOLET } -nbcolors 1 -layers { 1 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 5 -shell 5 -face 53 -shape 366
+checkstatshape res_1 -solid 12 -shell 12 -face 112 -freewire 0 -freeedge 0 -sharededge 126
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-007 -avg 1.000055896e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 6 -max_faults 0
+checkdoc "tpstat c" -max_warns 14 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 7 -n1 28 -n2 0 -total 35 -withname 20 -withcolor 5 -withlayer 20 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 7 -n1 13 -n2 0 -total 20 -withname 20 -withcolor 5 -withlayer 5 -centroid 0 -volume 0 -area 0 -colors { VIOLET } -nbcolors 1 -layers { 1 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 5 -shell 5 -face 53 -shape 366 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 12 -shell 12 -face 112 -freewire 0 -freeedge 0 -sharededge 126 -max_solid 12 -max_shell 12 -max_face 112 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.000055896e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename PRO10372.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 3 ( 3 ) Summary = 3 ( 3 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 4 ( 4 ) Shell = 4 ( 4 ) Face = 10 ( 10 ) Summary = 62 ( 62 )
-STATSHAPE : Solid = 4 ( 4 ) Shell = 4 ( 4 ) Face = 10 ( 10 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 20 ( 20 )
-TOLERANCE : MaxTol = 1e-007 ( 1e-007 ) AvgTol = 1e-007 ( 1e-007 )
-LABELS : N0Labels = 5 ( 5 ) N1Labels = 18 ( 19 ) N2Labels = 0 ( 0 ) TotalLabels = 23 ( 24 ) NameLabels = 9 ( 9 ) ColorLabels = 18 ( 19 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 4 ( 4 )
-COLORS : Colors = BLUE1 GREEN RED YELLOW ( BLUE1 GREEN RED YELLOW )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 3 -max_faults 0
+checkxstat D_First -n0 5 -n1 19 -n2 0 -total 24 -withname 9 -withcolor 19 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 GREEN RED YELLOW } -nbcolors 4 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 4 -shell 4 -face 10 -shape 62
+checkstatshape res_1 -solid 4 -shell 4 -face 10 -freewire 0 -freeedge 0 -sharededge 20
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-007 -avg 1e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 3 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 3 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 5 -n1 19 -n2 0 -total 24 -withname 9 -withcolor 19 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 4 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 5 -n1 18 -n2 0 -total 23 -withname 9 -withcolor 18 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 GREEN RED YELLOW } -nbcolors 4 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 4 -shell 4 -face 10 -shape 62 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 4 -shell 4 -face 10 -freewire 0 -freeedge 0 -sharededge 20 -max_solid 4 -max_shell 4 -max_face 10 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1e-007 -avg 1e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename trj8_c2-ct-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 1 ( 1 ) Summary = 16 ( 16 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 1 ( 1 ) FreeWire = 0 ( 0 ) FreeEdge = 1 ( 1 ) SharedEdge = 5 ( 5 )
-TOLERANCE : MaxTol = 1.00005e-007 ( 1.00005e-007 ) AvgTol = 1.0000375e-007 ( 1.0000375e-007 )
-LABELS : N0Labels = 3 ( 3 ) N1Labels = 2 ( 3 ) N2Labels = 0 ( 0 ) TotalLabels = 5 ( 6 ) NameLabels = 5 ( 5 ) ColorLabels = 2 ( 2 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = BLUE1 MAGENTA1 ( BLUE1 MAGENTA1 )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 3 -n1 3 -n2 0 -total 6 -withname 5 -withcolor 2 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 MAGENTA1 } -nbcolors 2 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 1 -face 1 -shape 16
+checkstatshape res_1 -solid 0 -shell 1 -face 1 -freewire 0 -freeedge 1 -sharededge 5
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.00005e-007 -avg 1.0000375e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3 -n1 3 -n2 0 -total 6 -withname 5 -withcolor 2 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 2 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 2 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 MAGENTA1 } -nbcolors 2 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 1 -face 1 -shape 16 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 1 -face 1 -freewire 0 -freeedge 1 -sharededge 5 -max_solid 0 -max_shell 1 -max_face 1 -max_freewire 0 -max_freeedge 1
+checkmaxtol res_2 -tol 1.00005e-007 -avg 1.0000375e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: NBSHAPES : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename trj8_c2-pe-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 1 ) Summary = 0 ( 1 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 1 ( 1 ) Summary = 16 ( 17 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 1 ( 1 ) FreeWire = 0 ( 1 ) FreeEdge = 1 ( 1 ) SharedEdge = 5 ( 5 )
-TOLERANCE : MaxTol = 1.00005e-007 ( 1.00005e-007 ) AvgTol = 1.0000375e-007 ( 1.0000375e-007 )
-LABELS : N0Labels = 3 ( 3 ) N1Labels = 3 ( 4 ) N2Labels = 0 ( 0 ) TotalLabels = 6 ( 7 ) NameLabels = 5 ( 5 ) ColorLabels = 2 ( 2 ) LayerLabels = 2 ( 2 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 1 ( 1 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = BLUE1 YELLOW ( BLUE1 YELLOW )
-NLAYERS : NLayers = 2 ( 2 )
-LAYERS : Layers = 03___PRT_ALL_CURVES 06___PRT_ALL_SURFS ( 03___PRT_ALL_CURVES 06___PRT_ALL_SURFS )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+checkxstat D_First -n0 3 -n1 4 -n2 0 -total 7 -withname 5 -withcolor 2 -withlayer 2 -centroid 0 -volume 0 -area 1 -colors { BLUE1 YELLOW } -nbcolors 2 -layers { "03___PRT_ALL_CURVES" "06___PRT_ALL_SURFS" } -nblayers 2
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 1 -face 1 -shape 17
+checkstatshape res_1 -solid 0 -shell 1 -face 1 -freewire 1 -freeedge 1 -sharededge 5
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.00005e-007 -avg 1.0000375e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3 -n1 4 -n2 0 -total 7 -withname 5 -withcolor 2 -withlayer 2 -centroid 0 -volume 0 -area 1 -nbcolors 2 -nblayers 2
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 3 -n2 0 -total 6 -withname 5 -withcolor 2 -withlayer 2 -centroid 0 -volume 0 -area 1 -colors { BLUE1 YELLOW } -nbcolors 2 -layers { "03___PRT_ALL_CURVES" "06___PRT_ALL_SURFS" } -nblayers 2
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 1 -face 1 -shape 16 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 1 -face 1 -freewire 0 -freeedge 1 -sharededge 5 -max_solid 0 -max_shell 1 -max_face 1 -max_freewire 1 -max_freeedge 1
+checkmaxtol res_2 -tol 1.00005e-007 -avg 1.0000375e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: COLORS : Faulty"
-
set filename trj2_io1-pe-203.stp
-set ref_data {
-DATA : Faulties = 0 ( 2 ) Warnings = 0 ( 0 ) Summary = 0 ( 2 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 29 ( 29 ) Summary = 193 ( 193 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 29 ( 29 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 70 ( 70 )
-TOLERANCE : MaxTol = 1.00005e-07 ( 1.00005e-07 ) AvgTol = 1.000039198e-07 ( 1.000039198e-07 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 2 ( 2 ) N2Labels = 0 ( 0 ) TotalLabels = 3 ( 3 ) NameLabels = 1 ( 1 ) ColorLabels = 3 ( 3 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 1 ( 1 ) Volume = 1 ( 1 ) Area = 1 ( 1 )
-NCOLORS : NColors = 1 ( 2 )
-COLORS : Colors = YELLOW ( RED YELLOW )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 2
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 2 -n2 0 -total 3 -withname 1 -withcolor 3 -withlayer 0 -centroid 1 -volume 1 -area 1 -colors { RED YELLOW } -nbcolors 2 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 29 -shape 193
+checkstatshape res_1 -solid 1 -shell 1 -face 29 -freewire 0 -freeedge 0 -sharededge 70
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.00005e-07 -avg 1.000039198e-07]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 2
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 2 -n2 0 -total 3 -withname 1 -withcolor 3 -withlayer 0 -centroid 1 -volume 1 -area 1 -nbcolors 2 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 2 -n2 0 -total 3 -withname 1 -withcolor 3 -withlayer 0 -centroid 1 -volume 1 -area 1 -colors { YELLOW } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 29 -shape 193 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 29 -freewire 0 -freeedge 0 -sharededge 70 -max_solid 1 -max_shell 1 -max_face 29 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.00005e-07 -avg 1.000039198e-07 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO OCC25905 ALL: STATSHAPE : Faulty"
set filename S4132-test.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 1 ( 0 ) Summary = 1 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 6 ( 0 ) Face = 6 ( 6 ) Summary = 78 ( 73 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 6 ( 0 ) Face = 6 ( 6 ) FreeWire = 0 ( 0 ) FreeEdge = 3 ( 4 ) SharedEdge = 27 ( 28 )
-TOLERANCE : MaxTol = 1e-007 ( 1e-007 ) AvgTol = 1e-007 ( 1e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 6 -shape 73
+checkstatshape res_1 -solid 0 -shell 0 -face 6 -freewire 0 -freeedge 4 -sharededge 28
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-007 -avg 1e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 6 -face 6 -shape 78 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 6 -face 6 -freewire 0 -freeedge 3 -sharededge 27 -max_solid 0 -max_shell 0 -max_face 6 -max_freewire 0 -max_freeedge 4
+checkmaxtol res_2 -tol 1e-007 -avg 1e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename trj9_c2-ct-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 1 ( 1 ) Summary = 16 ( 16 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 1 ( 1 ) FreeWire = 0 ( 0 ) FreeEdge = 1 ( 1 ) SharedEdge = 5 ( 5 )
-TOLERANCE : MaxTol = 1.00005e-007 ( 1.00005e-007 ) AvgTol = 1.0000375e-007 ( 1.0000375e-007 )
-LABELS : N0Labels = 3 ( 3 ) N1Labels = 2 ( 3 ) N2Labels = 0 ( 0 ) TotalLabels = 5 ( 6 ) NameLabels = 5 ( 5 ) ColorLabels = 2 ( 2 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = BLUE1 MAGENTA1 ( BLUE1 MAGENTA1 )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 3 -n1 3 -n2 0 -total 6 -withname 5 -withcolor 2 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 MAGENTA1 } -nbcolors 2 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 1 -face 1 -shape 16
+checkstatshape res_1 -solid 0 -shell 1 -face 1 -freewire 0 -freeedge 1 -sharededge 5
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.00005e-007 -avg 1.0000375e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3 -n1 3 -n2 0 -total 6 -withname 5 -withcolor 2 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 2 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 2 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 MAGENTA1 } -nbcolors 2 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 1 -face 1 -shape 16 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 1 -face 1 -freewire 0 -freeedge 1 -sharededge 5 -max_solid 0 -max_shell 1 -max_face 1 -max_freewire 0 -max_freeedge 1
+checkmaxtol res_2 -tol 1.00005e-007 -avg 1.0000375e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename trj9_c2-sy-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 1 ) Warnings = 0 ( 0 ) Summary = 0 ( 1 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 1 ( 1 ) Summary = 16 ( 16 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 1 ( 1 ) FreeWire = 0 ( 0 ) FreeEdge = 1 ( 1 ) SharedEdge = 5 ( 5 )
-TOLERANCE : MaxTol = 1.00005e-07 ( 1.00005e-07 ) AvgTol = 1.0000375e-07 ( 1.0000375e-07 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 2 ( 3 ) N2Labels = 0 ( 0 ) TotalLabels = 3 ( 4 ) NameLabels = 1 ( 1 ) ColorLabels = 2 ( 2 ) LayerLabels = 2 ( 2 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = DODGERBLUE2 MAGENTA1 ( DODGERBLUE2 MAGENTA1 )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 0 ( { 0} )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 1
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 3 -n2 0 -total 4 -withname 1 -withcolor 2 -withlayer 2 -centroid 0 -volume 0 -area 0 -colors { DODGERBLUE2 MAGENTA1 } -nbcolors 2 -layers { " 0" } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 1 -face 1 -shape 16
+checkstatshape res_1 -solid 0 -shell 1 -face 1 -freewire 0 -freeedge 1 -sharededge 5
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.00005e-07 -avg 1.0000375e-07]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 1
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 3 -n2 0 -total 4 -withname 1 -withcolor 2 -withlayer 2 -centroid 0 -volume 0 -area 0 -nbcolors 2 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 2 -n2 0 -total 3 -withname 1 -withcolor 2 -withlayer 2 -centroid 0 -volume 0 -area 0 -colors { DODGERBLUE2 MAGENTA1 } -nbcolors 2 -layers { 0 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 1 -face 1 -shape 16 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 1 -face 1 -freewire 0 -freeedge 1 -sharededge 5 -max_solid 0 -max_shell 1 -max_face 1 -max_freewire 0 -max_freeedge 1
+checkmaxtol res_2 -tol 1.00005e-07 -avg 1.0000375e-07 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename manliie-ar.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 8 ( 0 ) Summary = 8 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 14 ( 14 ) Summary = 168 ( 149 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 14 ( 14 ) FreeWire = 0 ( 0 ) FreeEdge = 18 ( 18 ) SharedEdge = 54 ( 54 )
-TOLERANCE : MaxTol = 7.347272566e-006 ( 7.347307142e-006 ) AvgTol = 1.215889538e-006 ( 1.215897255e-006 )
-LABELS : N0Labels = 3 ( 3 ) N1Labels = 2 ( 3 ) N2Labels = 0 ( 1 ) TotalLabels = 5 ( 7 ) NameLabels = 5 ( 5 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 3 -n1 3 -n2 1 -total 7 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 14 -shape 149
+checkstatshape res_1 -solid 1 -shell 1 -face 14 -freewire 0 -freeedge 18 -sharededge 54
+set max_tol_res_1 [checkmaxtol res_1 -tol 7.347307142e-006 -avg 1.215897255e-006]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 8 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3 -n1 3 -n2 1 -total 7 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 14 -shape 168 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 14 -freewire 0 -freeedge 18 -sharededge 54 -max_solid 1 -max_shell 1 -max_face 14 -max_freewire 0 -max_freeedge 18
+checkmaxtol res_2 -tol 7.347272566e-006 -avg 1.215889538e-006 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
set filename as1ug.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 14 ) Summary = 0 ( 14 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 5 ( 5 ) Shell = 5 ( 5 ) Face = 39 ( 39 ) Summary = 269 ( 269 )
-STATSHAPE : Solid = 18 ( 18 ) Shell = 18 ( 18 ) Face = 125 ( 125 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 91 ( 91 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1e-005 ) AvgTol = 1.00006917e-007 ( 2.879948407e-006 )
-LABELS : N0Labels = 9 ( 9 ) N1Labels = 13 ( 13 ) N2Labels = 0 ( 0 ) TotalLabels = 22 ( 22 ) NameLabels = 22 ( 19 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 14 -max_faults 0
+checkxstat D_First -n0 9 -n1 13 -n2 0 -total 22 -withname 19 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 5 -shell 5 -face 39 -shape 269
+checkstatshape res_1 -solid 18 -shell 18 -face 125 -freewire 0 -freeedge 0 -sharededge 91
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-005 -avg 2.879948407e-006]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 14 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 9 -n1 13 -n2 0 -total 22 -withname 19 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 9 -n1 13 -n2 0 -total 22 -withname 22 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 5 -shell 5 -face 39 -shape 269 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 18 -shell 18 -face 125 -freewire 0 -freeedge 0 -sharededge 91 -max_solid 18 -max_shell 18 -max_face 125 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.00006917e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename trj4_xr1-db-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 28 ( 0 ) Summary = 28 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 5 ( 5 ) Shell = 5 ( 5 ) Face = 53 ( 53 ) Summary = 404 ( 395 )
-STATSHAPE : Solid = 18 ( 18 ) Shell = 18 ( 18 ) Face = 160 ( 160 ) FreeWire = 0 ( 0 ) FreeEdge = 42 ( 42 ) SharedEdge = 137 ( 137 )
-TOLERANCE : MaxTol = 7.325606587e-006 ( 7.325606205e-006 ) AvgTol = 2.485953111e-006 ( 2.517689926e-006 )
-LABELS : N0Labels = 13 ( 13 ) N1Labels = 26 ( 35 ) N2Labels = 0 ( 9 ) TotalLabels = 39 ( 57 ) NameLabels = 26 ( 31 ) ColorLabels = 5 ( 5 ) LayerLabels = 16 ( 16 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 5 ( 5 )
-COLORS : Colors = CYAN1 GOLD3 RED3 TURQUOISE4 YELLOW ( CYAN1 GOLD3 RED3 TURQUOISE4 YELLOW )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 0 ( { 0} )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 13 -n1 35 -n2 9 -total 57 -withname 31 -withcolor 5 -withlayer 16 -centroid 0 -volume 0 -area 0 -colors { CYAN1 GOLD3 RED3 TURQUOISE4 YELLOW } -nbcolors 5 -layers { " 0" } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 5 -shell 5 -face 53 -shape 395
+checkstatshape res_1 -solid 18 -shell 18 -face 160 -freewire 0 -freeedge 42 -sharededge 137
+set max_tol_res_1 [checkmaxtol res_1 -tol 7.325606205e-006 -avg 2.517689926e-006]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 28 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 13 -n1 35 -n2 9 -total 57 -withname 31 -withcolor 5 -withlayer 16 -centroid 0 -volume 0 -area 0 -nbcolors 5 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 13 -n1 26 -n2 0 -total 39 -withname 26 -withcolor 5 -withlayer 16 -centroid 0 -volume 0 -area 0 -colors { CYAN1 GOLD3 RED3 TURQUOISE4 YELLOW } -nbcolors 5 -layers { 0 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 5 -shell 5 -face 53 -shape 404 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 18 -shell 18 -face 160 -freewire 0 -freeedge 42 -sharededge 137 -max_solid 18 -max_shell 18 -max_face 160 -max_freewire 0 -max_freeedge 42
+checkmaxtol res_2 -tol 7.325606587e-006 -avg 2.485953111e-006 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename trj4_xr1-ec-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 0 ( 0 ) Summary = 9 ( 9 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 0 ( 0 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 0 ( 0 )
-TOLERANCE : MaxTol = 0 ( 0 ) AvgTol = 0 ( 0 )
-LABELS : N0Labels = 9 ( 9 ) N1Labels = 13 ( 18 ) N2Labels = 0 ( 5 ) TotalLabels = 22 ( 32 ) NameLabels = 22 ( 27 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 9 -n1 18 -n2 5 -total 32 -withname 27 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 0 -shape 9
+checkstatshape res_1 -solid 0 -shell 0 -face 0 -freewire 0 -freeedge 0 -sharededge 0
+set max_tol_res_1 [checkmaxtol res_1 -tol 0 -avg 0]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 9 -n1 18 -n2 5 -total 32 -withname 27 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 9 -n1 13 -n2 0 -total 22 -withname 22 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 0 -face 0 -shape 9 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 0 -freewire 0 -freeedge 0 -sharededge 0 -max_solid 0 -max_shell 0 -max_face 0 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0 -avg 0 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename trj4_xr1-id-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 0 ( 0 ) Summary = 9 ( 9 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 0 ( 0 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 0 ( 0 )
-TOLERANCE : MaxTol = 0 ( 0 ) AvgTol = 0 ( 0 )
-LABELS : N0Labels = 9 ( 9 ) N1Labels = 13 ( 18 ) N2Labels = 0 ( 5 ) TotalLabels = 22 ( 32 ) NameLabels = 22 ( 27 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 9 -n1 18 -n2 5 -total 32 -withname 27 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 0 -shape 9
+checkstatshape res_1 -solid 0 -shell 0 -face 0 -freewire 0 -freeedge 0 -sharededge 0
+set max_tol_res_1 [checkmaxtol res_1 -tol 0 -avg 0]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 9 -n1 18 -n2 5 -total 32 -withname 27 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 9 -n1 13 -n2 0 -total 22 -withname 22 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 0 -face 0 -shape 9 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 0 -freewire 0 -freeedge 0 -sharededge 0 -max_solid 0 -max_shell 0 -max_face 0 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0 -avg 0 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename trj4_xr1-pe-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 7 ) Warnings = 0 ( 0 ) Summary = 0 ( 7 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 0 ( 0 ) Summary = 10 ( 10 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 0 ( 0 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 0 ( 0 )
-TOLERANCE : MaxTol = 0 ( 0 ) AvgTol = 0 ( 0 )
-LABELS : N0Labels = 10 ( 10 ) N1Labels = 13 ( 19 ) N2Labels = 0 ( 6 ) TotalLabels = 23 ( 35 ) NameLabels = 23 ( 29 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 9 ( 9 ) Volume = 9 ( 9 ) Area = 9 ( 9 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 7
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 10 -n1 19 -n2 6 -total 35 -withname 29 -withcolor 0 -withlayer 0 -centroid 9 -volume 9 -area 9 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 0 -shape 10
+checkstatshape res_1 -solid 0 -shell 0 -face 0 -freewire 0 -freeedge 0 -sharededge 0
+set max_tol_res_1 [checkmaxtol res_1 -tol 0 -avg 0]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 7
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 10 -n1 19 -n2 6 -total 35 -withname 29 -withcolor 0 -withlayer 0 -centroid 9 -volume 9 -area 9 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 10 -n1 13 -n2 0 -total 23 -withname 23 -withcolor 0 -withlayer 0 -centroid 9 -volume 9 -area 9 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 0 -face 0 -shape 10 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 0 -freewire 0 -freeedge 0 -sharededge 0 -max_solid 0 -max_shell 0 -max_face 0 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0 -avg 0 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename trj4_xr1-tc-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 26 ) Summary = 0 ( 26 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 5 ( 5 ) Shell = 5 ( 5 ) Face = 53 ( 53 ) Summary = 353 ( 353 )
-STATSHAPE : Solid = 18 ( 18 ) Shell = 18 ( 18 ) Face = 160 ( 160 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 126 ( 126 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1.000100003e-007 ) AvgTol = 1.000062348e-007 ( 1.000062348e-007 )
-LABELS : N0Labels = 9 ( 9 ) N1Labels = 13 ( 18 ) N2Labels = 0 ( 5 ) TotalLabels = 22 ( 32 ) NameLabels = 22 ( 27 ) ColorLabels = 5 ( 5 ) LayerLabels = 5 ( 5 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 5 ( 5 )
-COLORS : Colors = BLUE1 DARKORANGE GREEN RED YELLOW3 ( BLUE1 DARKORANGE GREEN RED YELLOW3 )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 000 ( 000 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 26 -max_faults 0
+checkxstat D_First -n0 9 -n1 18 -n2 5 -total 32 -withname 27 -withcolor 5 -withlayer 5 -centroid 0 -volume 0 -area 0 -colors { BLUE1 DARKORANGE GREEN RED YELLOW3 } -nbcolors 5 -layers { 000 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 5 -shell 5 -face 53 -shape 353
+checkstatshape res_1 -solid 18 -shell 18 -face 160 -freewire 0 -freeedge 0 -sharededge 126
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-007 -avg 1.000062348e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 26 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 9 -n1 18 -n2 5 -total 32 -withname 27 -withcolor 5 -withlayer 5 -centroid 0 -volume 0 -area 0 -nbcolors 5 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 9 -n1 13 -n2 0 -total 22 -withname 22 -withcolor 5 -withlayer 5 -centroid 0 -volume 0 -area 0 -colors { BLUE1 DARKORANGE GREEN RED YELLOW3 } -nbcolors 5 -layers { 000 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 5 -shell 5 -face 53 -shape 353 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 18 -shell 18 -face 160 -freewire 0 -freeedge 0 -sharededge 126 -max_solid 18 -max_shell 18 -max_face 160 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.000062348e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename trj4_xr1-tu-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 26 ) Summary = 0 ( 26 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 5 ( 5 ) Shell = 5 ( 5 ) Face = 53 ( 53 ) Summary = 353 ( 353 )
-STATSHAPE : Solid = 18 ( 18 ) Shell = 18 ( 18 ) Face = 160 ( 160 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 126 ( 126 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1.000100003e-007 ) AvgTol = 1.000062348e-007 ( 1.000062348e-007 )
-LABELS : N0Labels = 9 ( 9 ) N1Labels = 13 ( 18 ) N2Labels = 0 ( 5 ) TotalLabels = 22 ( 32 ) NameLabels = 22 ( 27 ) ColorLabels = 5 ( 5 ) LayerLabels = 5 ( 5 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 5 ( 5 )
-COLORS : Colors = BLUE1 DARKORANGE GREEN RED YELLOW3 ( BLUE1 DARKORANGE GREEN RED YELLOW3 )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 256 ( 256 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 26 -max_faults 0
+checkxstat D_First -n0 9 -n1 18 -n2 5 -total 32 -withname 27 -withcolor 5 -withlayer 5 -centroid 0 -volume 0 -area 0 -colors { BLUE1 DARKORANGE GREEN RED YELLOW3 } -nbcolors 5 -layers { 256 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 5 -shell 5 -face 53 -shape 353
+checkstatshape res_1 -solid 18 -shell 18 -face 160 -freewire 0 -freeedge 0 -sharededge 126
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-007 -avg 1.000062348e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 26 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 9 -n1 18 -n2 5 -total 32 -withname 27 -withcolor 5 -withlayer 5 -centroid 0 -volume 0 -area 0 -nbcolors 5 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 9 -n1 13 -n2 0 -total 22 -withname 22 -withcolor 5 -withlayer 5 -centroid 0 -volume 0 -area 0 -colors { BLUE1 DARKORANGE GREEN RED YELLOW3 } -nbcolors 5 -layers { 256 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 5 -shell 5 -face 53 -shape 353 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 18 -shell 18 -face 160 -freewire 0 -freeedge 0 -sharededge 126 -max_solid 18 -max_shell 18 -max_face 160 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.000062348e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename spigot.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 4 ( 0 ) Summary = 4 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 3 ( 3 ) Shell = 3 ( 3 ) Face = 22 ( 22 ) Summary = 223 ( 199 )
-STATSHAPE : Solid = 3 ( 3 ) Shell = 3 ( 3 ) Face = 22 ( 22 ) FreeWire = 0 ( 0 ) FreeEdge = 23 ( 23 ) SharedEdge = 68 ( 68 )
-TOLERANCE : MaxTol = 2.100585841e-007 ( 2.098677141e-007 ) AvgTol = 1.073366139e-007 ( 1.073253018e-007 )
-LABELS : N0Labels = 3 ( 3 ) N1Labels = 2 ( 3 ) N2Labels = 0 ( 1 ) TotalLabels = 5 ( 7 ) NameLabels = 5 ( 5 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 3 -n1 3 -n2 1 -total 7 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 3 -shell 3 -face 22 -shape 199
+checkstatshape res_1 -solid 3 -shell 3 -face 22 -freewire 0 -freeedge 23 -sharededge 68
+set max_tol_res_1 [checkmaxtol res_1 -tol 2.098677141e-007 -avg 1.073253018e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3 -n1 3 -n2 1 -total 7 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 3 -shell 3 -face 22 -shape 223 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 3 -shell 3 -face 22 -freewire 0 -freeedge 23 -sharededge 68 -max_solid 3 -max_shell 3 -max_face 22 -max_freewire 0 -max_freeedge 23
+checkmaxtol res_2 -tol 2.100585841e-007 -avg 1.073366139e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: STATSHAPE : Faulty"
-
set filename bm2_pe_t4-B.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 7 ) Summary = 0 ( 7 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 9 ( 0 ) Face = 9 ( 9 ) Summary = 116 ( 107 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 9 ( 0 ) Face = 9 ( 9 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 43 ( 43 )
-TOLERANCE : MaxTol = 0.003863207397 ( 0.02717230043 ) AvgTol = 0.0004713629472 ( 0.003097464581 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 5 ( 5 ) N2Labels = 0 ( 0 ) TotalLabels = 6 ( 6 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 5 ( 5 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 3 ( 3 )
-LAYERS : Layers = ACHSEN FLAECHEN VERBFLAECHE ( ACHSEN FLAECHEN VERBFLAECHE )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 7 -max_faults 0
+checkxstat D_First -n0 1 -n1 5 -n2 0 -total 6 -withname 1 -withcolor 0 -withlayer 5 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { ACHSEN FLAECHEN VERBFLAECHE } -nblayers 3
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 9 -shape 107
+checkstatshape res_1 -solid 0 -shell 0 -face 9 -freewire 0 -freeedge 0 -sharededge 43
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.02717230043 -avg 0.003097464581]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 7 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 5 -n2 0 -total 6 -withname 1 -withcolor 0 -withlayer 5 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 3
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 5 -n2 0 -total 6 -withname 1 -withcolor 0 -withlayer 5 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { ACHSEN FLAECHEN VERBFLAECHE } -nblayers 3
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 9 -face 9 -shape 116 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 9 -face 9 -freewire 0 -freeedge 0 -sharededge 43 -max_solid 0 -max_shell 0 -max_face 9 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.003863207397 -avg 0.0004713629472 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename trj6_c1-id-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 2 ( 2 ) Face = 7 ( 7 ) Summary = 50 ( 50 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 2 ( 2 ) Face = 7 ( 7 ) FreeWire = 0 ( 0 ) FreeEdge = 1 ( 1 ) SharedEdge = 17 ( 17 )
-TOLERANCE : MaxTol = 1e-007 ( 1e-007 ) AvgTol = 1e-007 ( 1e-007 )
-LABELS : N0Labels = 4 ( 4 ) N1Labels = 14 ( 15 ) N2Labels = 0 ( 0 ) TotalLabels = 18 ( 19 ) NameLabels = 7 ( 7 ) ColorLabels = 14 ( 14 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 5 ( 5 )
-COLORS : Colors = BLUE1 GREEN MAGENTA1 RED YELLOW ( BLUE1 GREEN MAGENTA1 RED YELLOW )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 4 -n1 15 -n2 0 -total 19 -withname 7 -withcolor 14 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 GREEN MAGENTA1 RED YELLOW } -nbcolors 5 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 2 -face 7 -shape 50
+checkstatshape res_1 -solid 1 -shell 2 -face 7 -freewire 0 -freeedge 1 -sharededge 17
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-007 -avg 1e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 4 -n1 15 -n2 0 -total 19 -withname 7 -withcolor 14 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 5 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 4 -n1 14 -n2 0 -total 18 -withname 7 -withcolor 14 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 GREEN MAGENTA1 RED YELLOW } -nbcolors 5 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 2 -face 7 -shape 50 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 2 -face 7 -freewire 0 -freeedge 1 -sharededge 17 -max_solid 1 -max_shell 2 -max_face 7 -max_freewire 0 -max_freeedge 1
+checkmaxtol res_2 -tol 1e-007 -avg 1e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: STATSHAPE : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename trj7_c2-ac-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 10 ) Warnings = 0 ( 0 ) Summary = 0 ( 10 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 1 ( 0 ) Face = 1 ( 1 ) Summary = 16 ( 16 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 1 ( 0 ) Face = 1 ( 1 ) FreeWire = 0 ( 0 ) FreeEdge = 1 ( 1 ) SharedEdge = 5 ( 5 )
-TOLERANCE : MaxTol = 1e-07 ( 1.000100004e-07 ) AvgTol = 1e-07 ( 1.000012501e-07 )
-LABELS : N0Labels = 3 ( 3 ) N1Labels = 3 ( 4 ) N2Labels = 0 ( 0 ) TotalLabels = 6 ( 7 ) NameLabels = 5 ( 5 ) ColorLabels = 2 ( 2 ) LayerLabels = 2 ( 2 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 1 ( 1 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = GREEN RED ( GREEN RED )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 0 ( 0 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 10
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 3 -n1 4 -n2 0 -total 7 -withname 5 -withcolor 2 -withlayer 2 -centroid 0 -volume 0 -area 1 -colors { GREEN RED } -nbcolors 2 -layers { 0 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 1 -shape 16
+checkstatshape res_1 -solid 0 -shell 0 -face 1 -freewire 0 -freeedge 1 -sharededge 5
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100004e-07 -avg 1.000012501e-07]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 10
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3 -n1 4 -n2 0 -total 7 -withname 5 -withcolor 2 -withlayer 2 -centroid 0 -volume 0 -area 1 -nbcolors 2 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 3 -n2 0 -total 6 -withname 5 -withcolor 2 -withlayer 2 -centroid 0 -volume 0 -area 1 -colors { GREEN RED } -nbcolors 2 -layers { 0 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 1 -face 1 -shape 16 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 1 -face 1 -freewire 0 -freeedge 1 -sharededge 5 -max_solid 0 -max_shell 0 -max_face 1 -max_freewire 0 -max_freeedge 1
+checkmaxtol res_2 -tol 1e-07 -avg 1e-07 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: STATSHAPE : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename trj8_c2-ac-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 10 ) Warnings = 0 ( 0 ) Summary = 0 ( 10 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 1 ( 0 ) Face = 1 ( 1 ) Summary = 16 ( 16 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 1 ( 0 ) Face = 1 ( 1 ) FreeWire = 0 ( 0 ) FreeEdge = 1 ( 1 ) SharedEdge = 5 ( 5 )
-TOLERANCE : MaxTol = 1e-07 ( 1.000100004e-07 ) AvgTol = 1e-07 ( 1.000012501e-07 )
-LABELS : N0Labels = 3 ( 3 ) N1Labels = 3 ( 4 ) N2Labels = 0 ( 0 ) TotalLabels = 6 ( 7 ) NameLabels = 5 ( 5 ) ColorLabels = 2 ( 2 ) LayerLabels = 2 ( 2 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = GREEN RED ( GREEN RED )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 0 ( 0 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 10
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 3 -n1 4 -n2 0 -total 7 -withname 5 -withcolor 2 -withlayer 2 -centroid 0 -volume 0 -area 0 -colors { GREEN RED } -nbcolors 2 -layers { 0 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 1 -shape 16
+checkstatshape res_1 -solid 0 -shell 0 -face 1 -freewire 0 -freeedge 1 -sharededge 5
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100004e-07 -avg 1.000012501e-07]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 10
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3 -n1 4 -n2 0 -total 7 -withname 5 -withcolor 2 -withlayer 2 -centroid 0 -volume 0 -area 0 -nbcolors 2 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 3 -n2 0 -total 6 -withname 5 -withcolor 2 -withlayer 2 -centroid 0 -volume 0 -area 0 -colors { GREEN RED } -nbcolors 2 -layers { 0 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 1 -face 1 -shape 16 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 1 -face 1 -freewire 0 -freeedge 1 -sharededge 5 -max_solid 0 -max_shell 0 -max_face 1 -max_freewire 0 -max_freeedge 1
+checkmaxtol res_2 -tol 1e-07 -avg 1e-07 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
puts "TODO CR23096 ALL: COLORS : Faulty"
-
set filename trj6_c1-ct-203.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 2 ( 2 ) Face = 7 ( 7 ) Summary = 50 ( 50 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 2 ( 2 ) Face = 7 ( 7 ) FreeWire = 0 ( 1 ) FreeEdge = 1 ( 1 ) SharedEdge = 17 ( 17 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1.000100003e-007 ) AvgTol = 1.000082981e-007 ( 1.000082981e-007 )
-LABELS : N0Labels = 4 ( 4 ) N1Labels = 4 ( 5 ) N2Labels = 0 ( 0 ) TotalLabels = 8 ( 9 ) NameLabels = 7 ( 7 ) ColorLabels = 2 ( 3 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 2 ( 3 )
-COLORS : Colors = BLUE1 WHITE ( BLUE1 GREEN WHITE )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 4 -n1 5 -n2 0 -total 9 -withname 7 -withcolor 3 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 GREEN WHITE } -nbcolors 3 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 2 -face 7 -shape 50
+checkstatshape res_1 -solid 1 -shell 2 -face 7 -freewire 1 -freeedge 1 -sharededge 17
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-007 -avg 1.000082981e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 4 -n1 5 -n2 0 -total 9 -withname 7 -withcolor 3 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 3 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 4 -n1 4 -n2 0 -total 8 -withname 7 -withcolor 2 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 WHITE } -nbcolors 2 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 2 -face 7 -shape 50 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 2 -face 7 -freewire 0 -freeedge 1 -sharededge 17 -max_solid 1 -max_shell 2 -max_face 7 -max_freewire 1 -max_freeedge 1
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.000082981e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
puts "TODO CR23096 ALL: COLORS : Faulty"
-
set filename trj6_c1-ct-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 2 ( 2 ) Face = 7 ( 7 ) Summary = 50 ( 50 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 2 ( 2 ) Face = 7 ( 7 ) FreeWire = 0 ( 1 ) FreeEdge = 1 ( 1 ) SharedEdge = 17 ( 17 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1.000100003e-007 ) AvgTol = 1.000082981e-007 ( 1.000082981e-007 )
-LABELS : N0Labels = 4 ( 4 ) N1Labels = 5 ( 6 ) N2Labels = 0 ( 0 ) TotalLabels = 9 ( 10 ) NameLabels = 7 ( 7 ) ColorLabels = 3 ( 4 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 3 ( 4 )
-COLORS : Colors = BLUE1 RED YELLOW ( BLUE1 GREEN RED YELLOW )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 4 -n1 6 -n2 0 -total 10 -withname 7 -withcolor 4 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 GREEN RED YELLOW } -nbcolors 4 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 2 -face 7 -shape 50
+checkstatshape res_1 -solid 1 -shell 2 -face 7 -freewire 1 -freeedge 1 -sharededge 17
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-007 -avg 1.000082981e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 4 -n1 6 -n2 0 -total 10 -withname 7 -withcolor 4 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 4 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 4 -n1 5 -n2 0 -total 9 -withname 7 -withcolor 3 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 RED YELLOW } -nbcolors 3 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 2 -face 7 -shape 50 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 2 -face 7 -freewire 0 -freeedge 1 -sharededge 17 -max_solid 1 -max_shell 2 -max_face 7 -max_freewire 1 -max_freeedge 1
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.000082981e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: NBSHAPES : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
puts "TODO CR23096 ALL: LAYERS : Faulty"
set filename tr8_ha1_db.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 1 ) Summary = 0 ( 1 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 6 ( 6 ) Summary = 35 ( 37 )
-STATSHAPE : Solid = 2 ( 2 ) Shell = 2 ( 2 ) Face = 12 ( 12 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 12 ( 12 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1.000100003e-007 ) AvgTol = 1.00009231e-007 ( 1.00009231e-007 )
-LABELS : N0Labels = 2 ( 2 ) N1Labels = 2 ( 3 ) N2Labels = 0 ( 0 ) TotalLabels = 4 ( 5 ) NameLabels = 4 ( 4 ) ColorLabels = 1 ( 1 ) LayerLabels = 1 ( 3 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = WHITE ( WHITE )
-NLAYERS : NLayers = 1 ( 2 )
-LAYERS : Layers = 0 ( { 0} 255 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+checkxstat D_First -n0 2 -n1 3 -n2 0 -total 5 -withname 4 -withcolor 1 -withlayer 3 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { } -nblayers 2
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 6 -shape 37
+checkstatshape res_1 -solid 2 -shell 2 -face 12 -freewire 0 -freeedge 0 -sharededge 12
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-007 -avg 1.00009231e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 2 -n1 3 -n2 0 -total 5 -withname 4 -withcolor 1 -withlayer 3 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 2
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 2 -n1 2 -n2 0 -total 4 -withname 4 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 6 -shape 35 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 2 -shell 2 -face 12 -freewire 0 -freeedge 0 -sharededge 12 -max_solid 2 -max_shell 2 -max_face 12 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.00009231e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj9_c2-id-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 1 ( 1 ) Summary = 16 ( 16 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 1 ( 1 ) FreeWire = 0 ( 0 ) FreeEdge = 1 ( 1 ) SharedEdge = 5 ( 5 )
-TOLERANCE : MaxTol = 1e-007 ( 1e-007 ) AvgTol = 1e-007 ( 1e-007 )
-LABELS : N0Labels = 3 ( 3 ) N1Labels = 2 ( 2 ) N2Labels = 0 ( 0 ) TotalLabels = 5 ( 5 ) NameLabels = 5 ( 5 ) ColorLabels = 2 ( 2 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = BLUE1 MAGENTA1 ( BLUE1 MAGENTA1 )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 2 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 MAGENTA1 } -nbcolors 2 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 1 -face 1 -shape 16
+checkstatshape res_1 -solid 0 -shell 1 -face 1 -freewire 0 -freeedge 1 -sharededge 5
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-007 -avg 1e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 2 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 2 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 2 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 MAGENTA1 } -nbcolors 2 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 1 -face 1 -shape 16 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 1 -face 1 -freewire 0 -freeedge 1 -sharededge 5 -max_solid 0 -max_shell 1 -max_face 1 -max_freewire 0 -max_freeedge 1
+checkmaxtol res_2 -tol 1e-007 -avg 1e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: STATSHAPE : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
puts "TODO CR23096 ALL: PROPS : Faulty"
puts "TODO CR23096 ALL: LAYERS : Faulty"
-
set filename trj9_c2-pe-203.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 1 ( 0 ) Face = 1 ( 1 ) Summary = 16 ( 16 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 1 ( 0 ) Face = 1 ( 1 ) FreeWire = 0 ( 0 ) FreeEdge = 1 ( 1 ) SharedEdge = 5 ( 5 )
-TOLERANCE : MaxTol = 1e-007 ( 1e-007 ) AvgTol = 1e-007 ( 1e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 2 ( 3 ) N2Labels = 0 ( 0 ) TotalLabels = 3 ( 4 ) NameLabels = 1 ( 1 ) ColorLabels = 2 ( 2 ) LayerLabels = 0 ( 1 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 1 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = BLUE1 YELLOW ( BLUE1 YELLOW )
-NLAYERS : NLayers = 0 ( 1 )
-LAYERS : Layers = ( 06___PRT_ALL_SURFS )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 3 -n2 0 -total 4 -withname 1 -withcolor 2 -withlayer 1 -centroid 0 -volume 0 -area 1 -colors { BLUE1 YELLOW } -nbcolors 2 -layers { } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 1 -shape 16
+checkstatshape res_1 -solid 0 -shell 0 -face 1 -freewire 0 -freeedge 1 -sharededge 5
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-007 -avg 1e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 3 -n2 0 -total 4 -withname 1 -withcolor 2 -withlayer 1 -centroid 0 -volume 0 -area 1 -nbcolors 2 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 2 -n2 0 -total 3 -withname 1 -withcolor 2 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 YELLOW } -nbcolors 2 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 1 -face 1 -shape 16 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 1 -face 1 -freewire 0 -freeedge 1 -sharededge 5 -max_solid 0 -max_shell 0 -max_face 1 -max_freewire 0 -max_freeedge 1
+checkmaxtol res_2 -tol 1e-007 -avg 1e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: STATSHAPE : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
puts "TODO CR23096 ALL: PROPS : Faulty"
puts "TODO CR23096 ALL: LAYERS : Faulty"
-
set filename trj9_c2-pe-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 1 ( 0 ) Face = 1 ( 1 ) Summary = 16 ( 16 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 1 ( 0 ) Face = 1 ( 1 ) FreeWire = 0 ( 0 ) FreeEdge = 1 ( 1 ) SharedEdge = 5 ( 5 )
-TOLERANCE : MaxTol = 1e-007 ( 1e-007 ) AvgTol = 1e-007 ( 1e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 2 ( 3 ) N2Labels = 0 ( 0 ) TotalLabels = 3 ( 4 ) NameLabels = 1 ( 1 ) ColorLabels = 2 ( 2 ) LayerLabels = 0 ( 1 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 1 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = BLUE1 YELLOW ( BLUE1 YELLOW )
-NLAYERS : NLayers = 0 ( 1 )
-LAYERS : Layers = ( 06___PRT_ALL_SURFS )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 3 -n2 0 -total 4 -withname 1 -withcolor 2 -withlayer 1 -centroid 0 -volume 0 -area 1 -colors { BLUE1 YELLOW } -nbcolors 2 -layers { } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 1 -shape 16
+checkstatshape res_1 -solid 0 -shell 0 -face 1 -freewire 0 -freeedge 1 -sharededge 5
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-007 -avg 1e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 3 -n2 0 -total 4 -withname 1 -withcolor 2 -withlayer 1 -centroid 0 -volume 0 -area 1 -nbcolors 2 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 2 -n2 0 -total 3 -withname 1 -withcolor 2 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 YELLOW } -nbcolors 2 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 1 -face 1 -shape 16 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 1 -face 1 -freewire 0 -freeedge 1 -sharededge 5 -max_solid 0 -max_shell 0 -max_face 1 -max_freewire 0 -max_freeedge 1
+checkmaxtol res_2 -tol 1e-007 -avg 1e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename CTS18953.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 14 ( 14 ) Face = 14 ( 14 ) Summary = 187 ( 187 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 14 ( 14 ) Face = 14 ( 14 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 72 ( 72 )
-TOLERANCE : MaxTol = 4.0002e-005 ( 4.0002e-005 ) AvgTol = 3.127982174e-006 ( 3.127982174e-006 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 14 -face 14 -shape 187
+checkstatshape res_1 -solid 0 -shell 14 -face 14 -freewire 0 -freeedge 0 -sharededge 72
+set max_tol_res_1 [checkmaxtol res_1 -tol 4.0002e-005 -avg 3.127982174e-006]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 14 -face 14 -shape 187 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 14 -face 14 -freewire 0 -freeedge 0 -sharededge 72 -max_solid 0 -max_shell 14 -max_face 14 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 4.0002e-005 -avg 3.127982174e-006 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename CTS18954.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 0 ( 0 ) Summary = 289 ( 231 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 0 ( 0 ) FreeWire = 0 ( 0 ) FreeEdge = 72 ( 72 ) SharedEdge = 72 ( 72 )
-TOLERANCE : MaxTol = 1e-007 ( 1e-007 ) AvgTol = 1e-007 ( 1e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 0 -shape 231
+checkstatshape res_1 -solid 0 -shell 0 -face 0 -freewire 0 -freeedge 72 -sharededge 72
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-007 -avg 1e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 0 -face 0 -shape 289 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 0 -freewire 0 -freeedge 72 -sharededge 72 -max_solid 0 -max_shell 0 -max_face 0 -max_freewire 0 -max_freeedge 72
+checkmaxtol res_2 -tol 1e-007 -avg 1e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename PRO10363.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 4 ( 4 ) Shell = 4 ( 4 ) Face = 15 ( 15 ) Summary = 88 ( 88 )
-STATSHAPE : Solid = 4 ( 4 ) Shell = 4 ( 4 ) Face = 15 ( 15 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 32 ( 32 )
-TOLERANCE : MaxTol = 4.774918149e-005 ( 4.77491815e-005 ) AvgTol = 7.658070949e-006 ( 7.65807095e-006 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 6 ( 6 ) N2Labels = 0 ( 0 ) TotalLabels = 7 ( 7 ) NameLabels = 1 ( 1 ) ColorLabels = 6 ( 6 ) LayerLabels = 4 ( 4 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 4 ( 4 )
-COLORS : Colors = BLUE1 GREEN RED YELLOW ( BLUE1 GREEN RED YELLOW )
-NLAYERS : NLayers = 2 ( 2 )
-LAYERS : Layers = 1 15 ( 1 15 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 6 -n2 0 -total 7 -withname 1 -withcolor 6 -withlayer 4 -centroid 0 -volume 0 -area 0 -colors { BLUE1 GREEN RED YELLOW } -nbcolors 4 -layers { 1 15 } -nblayers 2
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 4 -shell 4 -face 15 -shape 88
+checkstatshape res_1 -solid 4 -shell 4 -face 15 -freewire 0 -freeedge 0 -sharededge 32
+set max_tol_res_1 [checkmaxtol res_1 -tol 4.77491815e-005 -avg 7.65807095e-006]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 6 -n2 0 -total 7 -withname 1 -withcolor 6 -withlayer 4 -centroid 0 -volume 0 -area 0 -nbcolors 4 -nblayers 2
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 6 -n2 0 -total 7 -withname 1 -withcolor 6 -withlayer 4 -centroid 0 -volume 0 -area 0 -colors { BLUE1 GREEN RED YELLOW } -nbcolors 4 -layers { 1 15 } -nblayers 2
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 4 -shell 4 -face 15 -shape 88 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 4 -shell 4 -face 15 -freewire 0 -freeedge 0 -sharededge 32 -max_solid 4 -max_shell 4 -max_face 15 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 4.774918149e-005 -avg 7.658070949e-006 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename PRO7070.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 2 ( 3 ) Summary = 2 ( 3 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 27 ( 27 ) Summary = 183 ( 183 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 27 ( 27 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 72 ( 72 )
-TOLERANCE : MaxTol = 1e-007 ( 1e-007 ) AvgTol = 1e-007 ( 1e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 27 ( 27 ) N2Labels = 0 ( 0 ) TotalLabels = 28 ( 28 ) NameLabels = 1 ( 1 ) ColorLabels = 28 ( 28 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 5 ( 5 )
-COLORS : Colors = DEEPSKYBLUE2 GREEN MAGENTA1 ORANGE RED ( DEEPSKYBLUE2 GREEN MAGENTA1 ORANGE RED )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 3 -max_faults 0
+checkxstat D_First -n0 1 -n1 27 -n2 0 -total 28 -withname 1 -withcolor 28 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { DEEPSKYBLUE2 GREEN MAGENTA1 ORANGE RED } -nbcolors 5 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 1 -face 27 -shape 183
+checkstatshape res_1 -solid 0 -shell 1 -face 27 -freewire 0 -freeedge 0 -sharededge 72
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-007 -avg 1e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 3 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 27 -n2 0 -total 28 -withname 1 -withcolor 28 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 5 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 27 -n2 0 -total 28 -withname 1 -withcolor 28 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { DEEPSKYBLUE2 GREEN MAGENTA1 ORANGE RED } -nbcolors 5 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 1 -face 27 -shape 183 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 1 -face 27 -freewire 0 -freeedge 0 -sharededge 72 -max_solid 0 -max_shell 1 -max_face 27 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1e-007 -avg 1e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename PRO7071.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 1 ( 1 ) Summary = 1 ( 1 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 4 ( 4 ) Shell = 4 ( 4 ) Face = 15 ( 15 ) Summary = 88 ( 88 )
-STATSHAPE : Solid = 4 ( 4 ) Shell = 4 ( 4 ) Face = 15 ( 15 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 32 ( 32 )
-TOLERANCE : MaxTol = 1.259265374e-007 ( 1.298618578e-007 ) AvgTol = 1.021989133e-007 ( 1.025320621e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 4 ( 4 ) N2Labels = 0 ( 0 ) TotalLabels = 5 ( 5 ) NameLabels = 1 ( 1 ) ColorLabels = 4 ( 4 ) LayerLabels = 4 ( 4 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 4 ( 4 )
-COLORS : Colors = DODGERBLUE2 GREEN RED YELLOW ( DODGERBLUE2 GREEN RED YELLOW )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 0 ( { 0} )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+checkxstat D_First -n0 1 -n1 4 -n2 0 -total 5 -withname 1 -withcolor 4 -withlayer 4 -centroid 0 -volume 0 -area 0 -colors { DODGERBLUE2 GREEN RED YELLOW } -nbcolors 4 -layers { " 0" } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 4 -shell 4 -face 15 -shape 88
+checkstatshape res_1 -solid 4 -shell 4 -face 15 -freewire 0 -freeedge 0 -sharededge 32
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.298618578e-007 -avg 1.025320621e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 4 -n2 0 -total 5 -withname 1 -withcolor 4 -withlayer 4 -centroid 0 -volume 0 -area 0 -nbcolors 4 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 4 -n2 0 -total 5 -withname 1 -withcolor 4 -withlayer 4 -centroid 0 -volume 0 -area 0 -colors { DODGERBLUE2 GREEN RED YELLOW } -nbcolors 4 -layers { 0 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 4 -shell 4 -face 15 -shape 88 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 4 -shell 4 -face 15 -freewire 0 -freeedge 0 -sharededge 32 -max_solid 4 -max_shell 4 -max_face 15 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.259265374e-007 -avg 1.021989133e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
-
set filename PRO9245.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 4 ( 2 ) Summary = 4 ( 2 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 12 ( 12 ) Face = 12 ( 12 ) Summary = 136 ( 136 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 12 ( 12 ) Face = 12 ( 12 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 49 ( 49 )
-TOLERANCE : MaxTol = 0.0009846163783 ( 0.09817574823 ) AvgTol = 7.811513437e-005 ( 0.005635227301 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 12 -face 12 -shape 136
+checkstatshape res_1 -solid 0 -shell 12 -face 12 -freewire 0 -freeedge 0 -sharededge 49
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.09817574823 -avg 0.005635227301]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 12 -face 12 -shape 136 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 12 -face 12 -freewire 0 -freeedge 0 -sharededge 49 -max_solid 0 -max_shell 12 -max_face 12 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.0009846163783 -avg 7.811513437e-005 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename Part1.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 0 ( 0 ) Summary = 165 ( 165 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 0 ( 0 ) FreeWire = 0 ( 41 ) FreeEdge = 41 ( 41 ) SharedEdge = 41 ( 41 )
-TOLERANCE : MaxTol = 1e-007 ( 1e-007 ) AvgTol = 1e-007 ( 1e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 0 -shape 165
+checkstatshape res_1 -solid 0 -shell 0 -face 0 -freewire 41 -freeedge 41 -sharededge 41
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-007 -avg 1e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 0 -face 0 -shape 165 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 0 -freewire 0 -freeedge 41 -sharededge 41 -max_solid 0 -max_shell 0 -max_face 0 -max_freewire 41 -max_freeedge 41
+checkmaxtol res_2 -tol 1e-007 -avg 1e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename abs2.stp
-set ref_data {
-DATA : Faulties = 0 ( 6 ) Warnings = 0 ( 0 ) Summary = 0 ( 6 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 10 ( 10 ) Summary = 48 ( 48 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 10 ( 10 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 15 ( 15 )
-TOLERANCE : MaxTol = 1.00005e-07 ( 1.00005e-07 ) AvgTol = 1.000024e-07 ( 1.000024e-07 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 6
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 10 -shape 48
+checkstatshape res_1 -solid 1 -shell 1 -face 10 -freewire 0 -freeedge 0 -sharededge 15
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.00005e-07 -avg 1.000024e-07]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 6
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 10 -shape 48 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 10 -freewire 0 -freeedge 0 -sharededge 15 -max_solid 1 -max_shell 1 -max_face 10 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.00005e-07 -avg 1.000024e-07 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename axe-man-ar-bas.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 4 ( 4 ) Summary = 20 ( 20 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 4 ( 4 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 6 ( 6 )
-TOLERANCE : MaxTol = 1e-007 ( 1e-007 ) AvgTol = 1e-007 ( 1e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 4 -shape 20
+checkstatshape res_1 -solid 1 -shell 1 -face 4 -freewire 0 -freeedge 0 -sharededge 6
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-007 -avg 1e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 4 -shape 20 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 4 -freewire 0 -freeedge 0 -sharededge 6 -max_solid 1 -max_shell 1 -max_face 4 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1e-007 -avg 1e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename axe-man-ar-haut.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 4 ( 4 ) Summary = 20 ( 20 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 4 ( 4 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 6 ( 6 )
-TOLERANCE : MaxTol = 1e-007 ( 1e-007 ) AvgTol = 1e-007 ( 1e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 4 -shape 20
+checkstatshape res_1 -solid 1 -shell 1 -face 4 -freewire 0 -freeedge 0 -sharededge 6
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-007 -avg 1e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 4 -shape 20 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 4 -freewire 0 -freeedge 0 -sharededge 6 -max_solid 1 -max_shell 1 -max_face 4 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1e-007 -avg 1e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename axe1.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 4 ( 4 ) Summary = 20 ( 20 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 4 ( 4 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 6 ( 6 )
-TOLERANCE : MaxTol = 1e-007 ( 1e-007 ) AvgTol = 1e-007 ( 1e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 4 -shape 20
+checkstatshape res_1 -solid 1 -shell 1 -face 4 -freewire 0 -freeedge 0 -sharededge 6
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-007 -avg 1e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 4 -shape 20 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 4 -freewire 0 -freeedge 0 -sharededge 6 -max_solid 1 -max_shell 1 -max_face 4 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1e-007 -avg 1e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename axe1cas.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 4 ( 4 ) Summary = 20 ( 20 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 4 ( 4 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 6 ( 6 )
-TOLERANCE : MaxTol = 0.001449181499 ( 0.001449181499 ) AvgTol = 0.001159359401 ( 0.001159359401 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 4 -shape 20
+checkstatshape res_1 -solid 1 -shell 1 -face 4 -freewire 0 -freeedge 0 -sharededge 6
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.001449181499 -avg 0.001159359401]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 4 -shape 20 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 4 -freewire 0 -freeedge 0 -sharededge 6 -max_solid 1 -max_shell 1 -max_face 4 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.001449181499 -avg 0.001159359401 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename bm1_ie_fuel.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 4 ( 4 ) Summary = 4 ( 4 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 6 ( 6 ) Summary = 39 ( 39 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 6 ( 6 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 15 ( 15 )
-TOLERANCE : MaxTol = 0.003284526443 ( 0.003284526294 ) AvgTol = 0.0003244877968 ( 0.0003244877821 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 1 -face 6 -shape 39
+checkstatshape res_1 -solid 0 -shell 1 -face 6 -freewire 0 -freeedge 0 -sharededge 15
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.003284526294 -avg 0.0003244877821]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 1 -face 6 -shape 39 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 1 -face 6 -freewire 0 -freeedge 0 -sharededge 15 -max_solid 0 -max_shell 1 -max_face 6 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.003284526443 -avg 0.0003244877968 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename bm1_ie_lever.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 51 ( 51 ) Summary = 333 ( 333 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 51 ( 51 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 135 ( 135 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1.000100003e-007 ) AvgTol = 1.000083858e-007 ( 1.000083858e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 51 -shape 333
+checkstatshape res_1 -solid 1 -shell 1 -face 51 -freewire 0 -freeedge 0 -sharededge 135
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-007 -avg 1.000083858e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 51 -shape 333 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 51 -freewire 0 -freeedge 0 -sharededge 135 -max_solid 1 -max_shell 1 -max_face 51 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.000083858e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename bm1_pe_fuel.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 8 ( 8 ) Summary = 8 ( 8 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 6 ( 6 ) Face = 10 ( 10 ) Summary = 89 ( 89 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 6 ( 6 ) Face = 10 ( 10 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 34 ( 34 )
-TOLERANCE : MaxTol = 112.7632273 ( 112.7632273 ) AvgTol = 20.07582429 ( 20.07582429 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 8 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 6 -face 10 -shape 89
+checkstatshape res_1 -solid 0 -shell 6 -face 10 -freewire 0 -freeedge 0 -sharededge 34
+set max_tol_res_1 [checkmaxtol res_1 -tol 112.7632273 -avg 20.07582429]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 8 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 8 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 6 -face 10 -shape 89 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 6 -face 10 -freewire 0 -freeedge 0 -sharededge 34 -max_solid 0 -max_shell 6 -max_face 10 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 112.7632273 -avg 20.07582429 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename bm1_pe_lever.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 67 ( 67 ) Summary = 427 ( 427 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 67 ( 67 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 175 ( 175 )
-TOLERANCE : MaxTol = 0.01632915222 ( 0.01632915256 ) AvgTol = 0.0007574810923 ( 0.0007574811018 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 67 -shape 427
+checkstatshape res_1 -solid 1 -shell 1 -face 67 -freewire 0 -freeedge 0 -sharededge 175
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.01632915256 -avg 0.0007574811018]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 67 -shape 427 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 67 -freewire 0 -freeedge 0 -sharededge 175 -max_solid 1 -max_shell 1 -max_face 67 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.01632915222 -avg 0.0007574810923 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename bm1_sd_lever.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 1 ) Summary = 0 ( 1 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 68 ( 68 ) Summary = 430 ( 430 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 68 ( 68 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 175 ( 175 )
-TOLERANCE : MaxTol = 5.222214856e-007 ( 0.0002490151482 ) AvgTol = 1.105810875e-007 ( 6.344591722e-006 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 68 -shape 430
+checkstatshape res_1 -solid 1 -shell 1 -face 68 -freewire 0 -freeedge 0 -sharededge 175
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.0002490151482 -avg 6.344591722e-006]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 68 -shape 430 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 68 -freewire 0 -freeedge 0 -sharededge 175 -max_solid 1 -max_shell 1 -max_face 68 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 5.222214856e-007 -avg 1.105810875e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename bm1_tab.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 10 ( 10 ) Summary = 52 ( 52 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 10 ( 10 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 17 ( 17 )
-TOLERANCE : MaxTol = 1.00005e-007 ( 1.00005e-007 ) AvgTol = 1.000021429e-007 ( 1.000021429e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 10 -shape 52
+checkstatshape res_1 -solid 1 -shell 1 -face 10 -freewire 0 -freeedge 0 -sharededge 17
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.00005e-007 -avg 1.000021429e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 10 -shape 52 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 10 -freewire 0 -freeedge 0 -sharededge 17 -max_solid 1 -max_shell 1 -max_face 10 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.00005e-007 -avg 1.000021429e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename bm1_ug_exhaust.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 24 ) Summary = 0 ( 24 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 4 ( 4 ) Shell = 4 ( 4 ) Face = 42 ( 42 ) Summary = 401 ( 361 )
-STATSHAPE : Solid = 4 ( 4 ) Shell = 4 ( 4 ) Face = 42 ( 42 ) FreeWire = 0 ( 0 ) FreeEdge = 39 ( 39 ) SharedEdge = 119 ( 119 )
-TOLERANCE : MaxTol = 7.175387751e-006 ( 1e-005 ) AvgTol = 1.235815193e-006 ( 4.223737825e-006 )
-LABELS : N0Labels = 3 ( 3 ) N1Labels = 2 ( 2 ) N2Labels = 0 ( 0 ) TotalLabels = 5 ( 5 ) NameLabels = 5 ( 5 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 24 -max_faults 0
+checkxstat D_First -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 4 -shell 4 -face 42 -shape 361
+checkstatshape res_1 -solid 4 -shell 4 -face 42 -freewire 0 -freeedge 39 -sharededge 119
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-005 -avg 4.223737825e-006]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 24 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 4 -shell 4 -face 42 -shape 401 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 4 -shell 4 -face 42 -freewire 0 -freeedge 39 -sharededge 119 -max_solid 4 -max_shell 4 -max_face 42 -max_freewire 0 -max_freeedge 39
+checkmaxtol res_2 -tol 7.175387751e-006 -avg 1.235815193e-006 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename bm1_ug_lever.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 5 ) Summary = 0 ( 5 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 54 ( 54 ) Summary = 348 ( 348 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 54 ( 54 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 141 ( 141 )
-TOLERANCE : MaxTol = 4.437195315e-006 ( 1e-005 ) AvgTol = 1.674752273e-007 ( 8.934749522e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 5 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 54 -shape 348
+checkstatshape res_1 -solid 1 -shell 1 -face 54 -freewire 0 -freeedge 0 -sharededge 141
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-005 -avg 8.934749522e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 5 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 54 -shape 348 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 54 -freewire 0 -freeedge 0 -sharededge 141 -max_solid 1 -max_shell 1 -max_face 54 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 4.437195315e-006 -avg 1.674752273e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename bm2_id_t4-A.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 1 ) Summary = 0 ( 1 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 4 ( 4 ) Face = 13 ( 13 ) Summary = 100 ( 91 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 4 ( 4 ) Face = 13 ( 13 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 38 ( 35 )
-TOLERANCE : MaxTol = 0.004158901543 ( 0.004158984724 ) AvgTol = 0.001029525724 ( 0.001123872701 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 4 -face 13 -shape 91
+checkstatshape res_1 -solid 0 -shell 4 -face 13 -freewire 0 -freeedge 0 -sharededge 35
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.004158984724 -avg 0.001123872701]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 4 -face 13 -shape 100 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 4 -face 13 -freewire 0 -freeedge 0 -sharededge 38 -max_solid 0 -max_shell 4 -max_face 13 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.004158901543 -avg 0.001029525724 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
-
set filename bm2_ie_lever-A.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 1 ( 0 ) Summary = 1 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 51 ( 51 ) Summary = 333 ( 333 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 51 ( 51 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 135 ( 135 )
-TOLERANCE : MaxTol = 2.885132887e-007 ( 0.001459932907 ) AvgTol = 1.013219976e-007 ( 5.528247406e-005 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 51 -shape 333
+checkstatshape res_1 -solid 1 -shell 1 -face 51 -freewire 0 -freeedge 0 -sharededge 135
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.001459932907 -avg 5.528247406e-005]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 51 -shape 333 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 51 -freewire 0 -freeedge 0 -sharededge 135 -max_solid 1 -max_shell 1 -max_face 51 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 2.885132887e-007 -avg 1.013219976e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename bm2_ie_lever-B.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 51 ( 51 ) Summary = 333 ( 333 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 51 ( 51 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 135 ( 135 )
-TOLERANCE : MaxTol = 0.007690167811 ( 0.007690167811 ) AvgTol = 0.0007108302558 ( 0.0007108302555 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 51 -shape 333
+checkstatshape res_1 -solid 1 -shell 1 -face 51 -freewire 0 -freeedge 0 -sharededge 135
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.007690167811 -avg 0.0007108302555]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 51 -shape 333 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 51 -freewire 0 -freeedge 0 -sharededge 135 -max_solid 1 -max_shell 1 -max_face 51 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.007690167811 -avg 0.0007108302558 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
-
set filename bm2_ie_leverrod-A.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 4 ( 0 ) Summary = 4 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 51 ( 51 ) Summary = 335 ( 335 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 51 ( 51 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 136 ( 136 )
-TOLERANCE : MaxTol = 0.000304966156 ( 0.001459917492 ) AvgTol = 4.319608909e-006 ( 5.49000906e-005 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 51 -shape 335
+checkstatshape res_1 -solid 1 -shell 1 -face 51 -freewire 0 -freeedge 0 -sharededge 136
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.001459917492 -avg 5.49000906e-005]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 51 -shape 335 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 51 -freewire 0 -freeedge 0 -sharededge 136 -max_solid 1 -max_shell 1 -max_face 51 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.000304966156 -avg 4.319608909e-006 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename bm2_ie_leverrod-B.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 51 ( 51 ) Summary = 335 ( 335 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 51 ( 51 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 136 ( 136 )
-TOLERANCE : MaxTol = 0.007690533276 ( 0.007690533276 ) AvgTol = 0.0007804260397 ( 0.0007804260395 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 51 -shape 335
+checkstatshape res_1 -solid 1 -shell 1 -face 51 -freewire 0 -freeedge 0 -sharededge 136
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.007690533276 -avg 0.0007804260395]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 51 -shape 335 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 51 -freewire 0 -freeedge 0 -sharededge 136 -max_solid 1 -max_shell 1 -max_face 51 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.007690533276 -avg 0.0007804260397 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename bm2_pe_lever-A.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 67 ( 67 ) Summary = 427 ( 427 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 67 ( 67 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 175 ( 175 )
-TOLERANCE : MaxTol = 0.0006428800219 ( 0.0006428800219 ) AvgTol = 2.990869936e-005 ( 2.990869936e-005 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 67 -shape 427
+checkstatshape res_1 -solid 1 -shell 1 -face 67 -freewire 0 -freeedge 0 -sharededge 175
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.0006428800219 -avg 2.990869936e-005]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 67 -shape 427 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 67 -freewire 0 -freeedge 0 -sharededge 175 -max_solid 1 -max_shell 1 -max_face 67 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.0006428800219 -avg 2.990869936e-005 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename bm2_pe_t4-A.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 7 ( 7 ) Face = 9 ( 9 ) Summary = 108 ( 108 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 7 ( 7 ) Face = 9 ( 9 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 41 ( 41 )
-TOLERANCE : MaxTol = 0.003863207397 ( 0.04018695152 ) AvgTol = 0.000366443826 ( 0.001787191105 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 5 ( 5 ) N2Labels = 0 ( 0 ) TotalLabels = 6 ( 6 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 5 ( 5 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 3 ( 3 )
-LAYERS : Layers = ACHSEN FLAECHEN VERBFLAECHE ( ACHSEN FLAECHEN VERBFLAECHE )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 5 -n2 0 -total 6 -withname 1 -withcolor 0 -withlayer 5 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { ACHSEN FLAECHEN VERBFLAECHE } -nblayers 3
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 7 -face 9 -shape 108
+checkstatshape res_1 -solid 0 -shell 7 -face 9 -freewire 0 -freeedge 0 -sharededge 41
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.04018695152 -avg 0.001787191105]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 5 -n2 0 -total 6 -withname 1 -withcolor 0 -withlayer 5 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 3
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 5 -n2 0 -total 6 -withname 1 -withcolor 0 -withlayer 5 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { ACHSEN FLAECHEN VERBFLAECHE } -nblayers 3
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 7 -face 9 -shape 108 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 7 -face 9 -freewire 0 -freeedge 0 -sharededge 41 -max_solid 0 -max_shell 7 -max_face 9 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.003863207397 -avg 0.000366443826 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename bm2_ug_lever-A.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 5 ) Summary = 0 ( 5 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 54 ( 54 ) Summary = 348 ( 348 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 54 ( 54 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 141 ( 141 )
-TOLERANCE : MaxTol = 4.437195315e-006 ( 1e-005 ) AvgTol = 1.674752273e-007 ( 8.934749522e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 5 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 54 -shape 348
+checkstatshape res_1 -solid 1 -shell 1 -face 54 -freewire 0 -freeedge 0 -sharededge 141
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-005 -avg 8.934749522e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 5 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 54 -shape 348 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 54 -freewire 0 -freeedge 0 -sharededge 141 -max_solid 1 -max_shell 1 -max_face 54 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 4.437195315e-006 -avg 1.674752273e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename tr9_bv1-sd.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 3 ( 3 ) Face = 18 ( 18 ) Summary = 100 ( 100 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 3 ( 3 ) Face = 18 ( 18 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 36 ( 36 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1.000100003e-007 ) AvgTol = 1.00009231e-007 ( 1.00009231e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = GREEN ( GREEN )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { GREEN } -nbcolors 1 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 3 -face 18 -shape 100
+checkstatshape res_1 -solid 1 -shell 3 -face 18 -freewire 0 -freeedge 0 -sharededge 36
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-007 -avg 1.00009231e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { GREEN } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 3 -face 18 -shape 100 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 3 -face 18 -freewire 0 -freeedge 0 -sharededge 36 -max_solid 1 -max_shell 3 -max_face 18 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.00009231e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename conrod.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 2 ( 2 ) Summary = 2 ( 2 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 22 ( 22 ) Summary = 150 ( 150 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 22 ( 22 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 60 ( 60 )
-TOLERANCE : MaxTol = 1e-007 ( 1e-007 ) AvgTol = 1e-007 ( 1e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 22 -shape 150
+checkstatshape res_1 -solid 1 -shell 1 -face 22 -freewire 0 -freeedge 0 -sharededge 60
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-007 -avg 1e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 22 -shape 150 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 22 -freewire 0 -freeedge 0 -sharededge 60 -max_solid 1 -max_shell 1 -max_face 22 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1e-007 -avg 1e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename fuel_flange.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 1 ) Summary = 0 ( 1 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 72 ( 72 ) Summary = 450 ( 450 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 72 ( 72 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 180 ( 180 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1.000100003e-007 ) AvgTol = 1.000049914e-007 ( 1.000049914e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 72 -shape 450
+checkstatshape res_1 -solid 1 -shell 1 -face 72 -freewire 0 -freeedge 0 -sharededge 180
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-007 -avg 1.000049914e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 72 -shape 450 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 72 -freewire 0 -freeedge 0 -sharededge 180 -max_solid 1 -max_shell 1 -max_face 72 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.000049914e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename hnc_63.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 23 ( 23 ) Summary = 161 ( 161 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 23 ( 23 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 63 ( 63 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1.000100003e-007 ) AvgTol = 1.000065338e-007 ( 1.000065338e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 23 -shape 161
+checkstatshape res_1 -solid 1 -shell 1 -face 23 -freewire 0 -freeedge 0 -sharededge 63
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-007 -avg 1.000065338e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 23 -shape 161 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 23 -freewire 0 -freeedge 0 -sharededge 63 -max_solid 1 -max_shell 1 -max_face 23 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.000065338e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename manille1.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 10 ( 10 ) Summary = 66 ( 66 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 10 ( 10 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 24 ( 24 )
-TOLERANCE : MaxTol = 1e-007 ( 1e-007 ) AvgTol = 1e-007 ( 1e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 10 -shape 66
+checkstatshape res_1 -solid 1 -shell 1 -face 10 -freewire 0 -freeedge 0 -sharededge 24
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-007 -avg 1e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 10 -shape 66 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 10 -freewire 0 -freeedge 0 -sharededge 24 -max_solid 1 -max_shell 1 -max_face 10 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1e-007 -avg 1e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename manille3-b.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 8 ( 8 ) Summary = 50 ( 50 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 8 ( 8 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 18 ( 18 )
-TOLERANCE : MaxTol = 1e-007 ( 1e-007 ) AvgTol = 1e-007 ( 1e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 8 -shape 50
+checkstatshape res_1 -solid 1 -shell 1 -face 8 -freewire 0 -freeedge 0 -sharededge 18
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-007 -avg 1e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 8 -shape 50 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 8 -freewire 0 -freeedge 0 -sharededge 18 -max_solid 1 -max_shell 1 -max_face 8 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1e-007 -avg 1e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename manille3-h.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 8 ( 8 ) Summary = 50 ( 50 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 8 ( 8 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 18 ( 18 )
-TOLERANCE : MaxTol = 1e-007 ( 1e-007 ) AvgTol = 1e-007 ( 1e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 8 -shape 50
+checkstatshape res_1 -solid 1 -shell 1 -face 8 -freewire 0 -freeedge 0 -sharededge 18
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-007 -avg 1e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 8 -shape 50 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 8 -freewire 0 -freeedge 0 -sharededge 18 -max_solid 1 -max_shell 1 -max_face 8 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1e-007 -avg 1e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename pr1ct.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 4 ( 4 ) Shell = 4 ( 4 ) Face = 15 ( 15 ) Summary = 89 ( 89 )
-STATSHAPE : Solid = 4 ( 4 ) Shell = 4 ( 4 ) Face = 15 ( 15 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 32 ( 32 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1.000100003e-007 ) AvgTol = 1.000042329e-007 ( 1.000042329e-007 )
-LABELS : N0Labels = 3 ( 3 ) N1Labels = 1 ( 1 ) N2Labels = 0 ( 0 ) TotalLabels = 4 ( 4 ) NameLabels = 3 ( 3 ) ColorLabels = 1 ( 1 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = GREEN ( GREEN )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 3 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 3 -n1 1 -n2 0 -total 4 -withname 3 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { GREEN } -nbcolors 1 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 4 -shell 4 -face 15 -shape 89
+checkstatshape res_1 -solid 4 -shell 4 -face 15 -freewire 0 -freeedge 0 -sharededge 32
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-007 -avg 1.000042329e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 3 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3 -n1 1 -n2 0 -total 4 -withname 3 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 1 -n2 0 -total 4 -withname 3 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { GREEN } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 4 -shell 4 -face 15 -shape 89 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 4 -shell 4 -face 15 -freewire 0 -freeedge 0 -sharededge 32 -max_solid 4 -max_shell 4 -max_face 15 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.000042329e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename pr1db.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 8 ( 8 ) Summary = 8 ( 8 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 4 ( 4 ) Shell = 4 ( 4 ) Face = 15 ( 15 ) Summary = 88 ( 88 )
-STATSHAPE : Solid = 4 ( 4 ) Shell = 4 ( 4 ) Face = 15 ( 15 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 32 ( 32 )
-TOLERANCE : MaxTol = 4.77502491e-005 ( 4.883486644e-005 ) AvgTol = 1.125893753e-005 ( 1.194897185e-005 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 4 ( 4 ) N2Labels = 0 ( 0 ) TotalLabels = 5 ( 5 ) NameLabels = 1 ( 1 ) ColorLabels = 4 ( 4 ) LayerLabels = 4 ( 4 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 4 ( 4 )
-COLORS : Colors = DODGERBLUE2 GREEN RED YELLOW ( DODGERBLUE2 GREEN RED YELLOW )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 0 ( 0 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 8 -max_faults 0
+checkxstat D_First -n0 1 -n1 4 -n2 0 -total 5 -withname 1 -withcolor 4 -withlayer 4 -centroid 0 -volume 0 -area 0 -colors { DODGERBLUE2 GREEN RED YELLOW } -nbcolors 4 -layers { 0 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 4 -shell 4 -face 15 -shape 88
+checkstatshape res_1 -solid 4 -shell 4 -face 15 -freewire 0 -freeedge 0 -sharededge 32
+set max_tol_res_1 [checkmaxtol res_1 -tol 4.883486644e-005 -avg 1.194897185e-005]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 8 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 8 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 4 -n2 0 -total 5 -withname 1 -withcolor 4 -withlayer 4 -centroid 0 -volume 0 -area 0 -nbcolors 4 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 4 -n2 0 -total 5 -withname 1 -withcolor 4 -withlayer 4 -centroid 0 -volume 0 -area 0 -colors { DODGERBLUE2 GREEN RED YELLOW } -nbcolors 4 -layers { 0 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 4 -shell 4 -face 15 -shape 88 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 4 -shell 4 -face 15 -freewire 0 -freeedge 0 -sharededge 32 -max_solid 4 -max_shell 4 -max_face 15 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 4.77502491e-005 -avg 1.125893753e-005 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename pr1pe.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 4 ( 4 ) Shell = 4 ( 4 ) Face = 15 ( 15 ) Summary = 88 ( 88 )
-STATSHAPE : Solid = 4 ( 4 ) Shell = 4 ( 4 ) Face = 15 ( 15 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 32 ( 32 )
-TOLERANCE : MaxTol = 0.0003426289767 ( 0.0003426285624 ) AvgTol = 7.259288845e-005 ( 7.259282167e-005 )
-LABELS : N0Labels = 5 ( 5 ) N1Labels = 4 ( 4 ) N2Labels = 0 ( 0 ) TotalLabels = 9 ( 9 ) NameLabels = 9 ( 9 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 5 -n1 4 -n2 0 -total 9 -withname 9 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 4 -shell 4 -face 15 -shape 88
+checkstatshape res_1 -solid 4 -shell 4 -face 15 -freewire 0 -freeedge 0 -sharededge 32
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.0003426285624 -avg 7.259282167e-005]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 5 -n1 4 -n2 0 -total 9 -withname 9 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 5 -n1 4 -n2 0 -total 9 -withname 9 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 4 -shell 4 -face 15 -shape 88 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 4 -shell 4 -face 15 -freewire 0 -freeedge 0 -sharededge 32 -max_solid 4 -max_shell 4 -max_face 15 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.0003426289767 -avg 7.259288845e-005 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename pr1sd.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 4 ( 4 ) Shell = 4 ( 4 ) Face = 17 ( 17 ) Summary = 98 ( 98 )
-STATSHAPE : Solid = 4 ( 4 ) Shell = 4 ( 4 ) Face = 17 ( 17 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 36 ( 36 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1.000100003e-007 ) AvgTol = 1.00003721e-007 ( 1.00003721e-007 )
-LABELS : N0Labels = 4 ( 4 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 4 ( 4 ) NameLabels = 4 ( 4 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 4 -n1 0 -n2 0 -total 4 -withname 4 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 4 -shell 4 -face 17 -shape 98
+checkstatshape res_1 -solid 4 -shell 4 -face 17 -freewire 0 -freeedge 0 -sharededge 36
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-007 -avg 1.00003721e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 4 -n1 0 -n2 0 -total 4 -withname 4 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 4 -n1 0 -n2 0 -total 4 -withname 4 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 4 -shell 4 -face 17 -shape 98 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 4 -shell 4 -face 17 -freewire 0 -freeedge 0 -sharededge 36 -max_solid 4 -max_shell 4 -max_face 17 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.00003721e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename pr1sy.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 2 ) Summary = 0 ( 2 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 4 ( 4 ) Shell = 4 ( 4 ) Face = 11 ( 11 ) Summary = 66 ( 66 )
-STATSHAPE : Solid = 4 ( 4 ) Shell = 4 ( 4 ) Face = 11 ( 11 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 21 ( 21 )
-TOLERANCE : MaxTol = 2.345200447e-007 ( 1e-005 ) AvgTol = 1.111589635e-007 ( 1.163226741e-006 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 4 ( 4 ) N2Labels = 0 ( 0 ) TotalLabels = 5 ( 5 ) NameLabels = 1 ( 1 ) ColorLabels = 4 ( 4 ) LayerLabels = 4 ( 4 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 4 ( 4 )
-COLORS : Colors = GOLD GREEN RED ROYALBLUE ( GOLD GREEN RED ROYALBLUE )
-NLAYERS : NLayers = 3 ( 3 )
-LAYERS : Layers = 0 254 X ( 0 254 X )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+checkxstat D_First -n0 1 -n1 4 -n2 0 -total 5 -withname 1 -withcolor 4 -withlayer 4 -centroid 0 -volume 0 -area 0 -colors { GOLD GREEN RED ROYALBLUE } -nbcolors 4 -layers { 0 254 X } -nblayers 3
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 4 -shell 4 -face 11 -shape 66
+checkstatshape res_1 -solid 4 -shell 4 -face 11 -freewire 0 -freeedge 0 -sharededge 21
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-005 -avg 1.163226741e-006]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 4 -n2 0 -total 5 -withname 1 -withcolor 4 -withlayer 4 -centroid 0 -volume 0 -area 0 -nbcolors 4 -nblayers 3
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 4 -n2 0 -total 5 -withname 1 -withcolor 4 -withlayer 4 -centroid 0 -volume 0 -area 0 -colors { GOLD GREEN RED ROYALBLUE } -nbcolors 4 -layers { 0 254 X } -nblayers 3
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 4 -shell 4 -face 11 -shape 66 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 4 -shell 4 -face 11 -freewire 0 -freeedge 0 -sharededge 21 -max_solid 4 -max_shell 4 -max_face 11 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 2.345200447e-007 -avg 1.111589635e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename pr2ct.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 6 ( 6 ) Summary = 34 ( 34 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 6 ( 6 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 12 ( 12 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1.000100003e-007 ) AvgTol = 1.00009231e-007 ( 1.00009231e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 2 ( 2 ) N2Labels = 0 ( 0 ) TotalLabels = 3 ( 3 ) NameLabels = 1 ( 1 ) ColorLabels = 2 ( 2 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = BLUE1 GREEN ( BLUE1 GREEN )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 2 -n2 0 -total 3 -withname 1 -withcolor 2 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 GREEN } -nbcolors 2 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 6 -shape 34
+checkstatshape res_1 -solid 1 -shell 1 -face 6 -freewire 0 -freeedge 0 -sharededge 12
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-007 -avg 1.00009231e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 2 -n2 0 -total 3 -withname 1 -withcolor 2 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 2 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 2 -n2 0 -total 3 -withname 1 -withcolor 2 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 GREEN } -nbcolors 2 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 6 -shape 34 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 6 -freewire 0 -freeedge 0 -sharededge 12 -max_solid 1 -max_shell 1 -max_face 6 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.00009231e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename pr2sd.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 6 ( 6 ) Summary = 34 ( 34 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 6 ( 6 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 12 ( 12 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1.000100003e-007 ) AvgTol = 1.00009231e-007 ( 1.00009231e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 1 ( 1 ) N2Labels = 0 ( 0 ) TotalLabels = 2 ( 2 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = BLUE1 ( BLUE1 )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 1 -n2 0 -total 2 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 } -nbcolors 1 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 6 -shape 34
+checkstatshape res_1 -solid 1 -shell 1 -face 6 -freewire 0 -freeedge 0 -sharededge 12
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-007 -avg 1.00009231e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 1 -n2 0 -total 2 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 1 -n2 0 -total 2 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 6 -shape 34 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 6 -freewire 0 -freeedge 0 -sharededge 12 -max_solid 1 -max_shell 1 -max_face 6 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.00009231e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
-set LinuxDiff 1
set filename pr_3-al.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 7 ( 8 ) Summary = 7 ( 8 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 4 ( 4 ) Shell = 4 ( 4 ) Face = 13 ( 13 ) Summary = 80 ( 80 )
-STATSHAPE : Solid = 4 ( 4 ) Shell = 4 ( 4 ) Face = 13 ( 13 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 30 ( 30 )
- TOLERANCE : MaxTol = 0.008922501024 ( 0.03514950194 ) AvgTol = 0.000950414902 ( 0.004694138186 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 4 ( 4 ) N2Labels = 0 ( 0 ) TotalLabels = 5 ( 5 ) NameLabels = 1 ( 1 ) ColorLabels = 4 ( 4 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 4 ( 4 )
-COLORS : Colors = BLUE1 GREEN RED YELLOW ( BLUE1 GREEN RED YELLOW )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 7 -max_faults 0
+checkxstat D_First -n0 1 -n1 4 -n2 0 -total 5 -withname 1 -withcolor 4 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 GREEN RED YELLOW } -nbcolors 4 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 4 -shell 4 -face 13 -shape 80
+checkstatshape res_1 -solid 4 -shell 4 -face 13 -freewire 0 -freeedge 0 -sharededge 30
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.03514950194 -avg 0.004694138186]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 7 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 7 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 4 -n2 0 -total 5 -withname 1 -withcolor 4 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 4 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 4 -n2 0 -total 5 -withname 1 -withcolor 4 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 GREEN RED YELLOW } -nbcolors 4 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 4 -shell 4 -face 13 -shape 80 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 4 -shell 4 -face 13 -freewire 0 -freeedge 0 -sharededge 30 -max_solid 4 -max_shell 4 -max_face 13 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.008922501024 -avg 0.000950414902 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename pr_3-sd.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 4 ( 4 ) Shell = 4 ( 4 ) Face = 17 ( 17 ) Summary = 102 ( 102 )
-STATSHAPE : Solid = 4 ( 4 ) Shell = 4 ( 4 ) Face = 17 ( 17 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 38 ( 38 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1.000100003e-007 ) AvgTol = 1.000035243e-007 ( 1.000035243e-007 )
-LABELS : N0Labels = 4 ( 4 ) N1Labels = 1 ( 1 ) N2Labels = 0 ( 0 ) TotalLabels = 5 ( 5 ) NameLabels = 4 ( 4 ) ColorLabels = 5 ( 5 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 4 ( 4 )
-COLORS : Colors = BLUE1 GREEN RED YELLOW ( BLUE1 GREEN RED YELLOW )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 4 -n1 1 -n2 0 -total 5 -withname 4 -withcolor 5 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 GREEN RED YELLOW } -nbcolors 4 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 4 -shell 4 -face 17 -shape 102
+checkstatshape res_1 -solid 4 -shell 4 -face 17 -freewire 0 -freeedge 0 -sharededge 38
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-007 -avg 1.000035243e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 4 -n1 1 -n2 0 -total 5 -withname 4 -withcolor 5 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 4 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 4 -n1 1 -n2 0 -total 5 -withname 4 -withcolor 5 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 GREEN RED YELLOW } -nbcolors 4 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 4 -shell 4 -face 17 -shape 102 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 4 -shell 4 -face 17 -freewire 0 -freeedge 0 -sharededge 38 -max_solid 4 -max_shell 4 -max_face 17 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.000035243e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename pr_3-sy.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 2 ) Summary = 0 ( 2 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 4 ( 4 ) Shell = 4 ( 4 ) Face = 11 ( 11 ) Summary = 64 ( 64 )
-STATSHAPE : Solid = 4 ( 4 ) Shell = 4 ( 4 ) Face = 11 ( 11 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 20 ( 20 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1e-005 ) AvgTol = 1.000064001e-007 ( 1.20880592e-006 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 4 ( 4 ) N2Labels = 0 ( 0 ) TotalLabels = 5 ( 5 ) NameLabels = 1 ( 1 ) ColorLabels = 4 ( 4 ) LayerLabels = 4 ( 4 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 4 ( 4 )
-COLORS : Colors = GOLD GREEN RED ROYALBLUE ( GOLD GREEN RED ROYALBLUE )
-NLAYERS : NLayers = 2 ( 2 )
-LAYERS : Layers = 1 A ( 1 A )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+checkxstat D_First -n0 1 -n1 4 -n2 0 -total 5 -withname 1 -withcolor 4 -withlayer 4 -centroid 0 -volume 0 -area 0 -colors { GOLD GREEN RED ROYALBLUE } -nbcolors 4 -layers { 1 A } -nblayers 2
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 4 -shell 4 -face 11 -shape 64
+checkstatshape res_1 -solid 4 -shell 4 -face 11 -freewire 0 -freeedge 0 -sharededge 20
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-005 -avg 1.20880592e-006]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 4 -n2 0 -total 5 -withname 1 -withcolor 4 -withlayer 4 -centroid 0 -volume 0 -area 0 -nbcolors 4 -nblayers 2
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 4 -n2 0 -total 5 -withname 1 -withcolor 4 -withlayer 4 -centroid 0 -volume 0 -area 0 -colors { GOLD GREEN RED ROYALBLUE } -nbcolors 4 -layers { 1 A } -nblayers 2
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 4 -shell 4 -face 11 -shape 64 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 4 -shell 4 -face 11 -freewire 0 -freeedge 0 -sharededge 20 -max_solid 4 -max_shell 4 -max_face 11 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.000064001e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj4_k1_top-ug-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 10 ) Summary = 0 ( 10 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 44 ( 44 ) Summary = 287 ( 287 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 44 ( 44 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 118 ( 118 )
-TOLERANCE : MaxTol = 0.004260923847 ( 0.004260923847 ) AvgTol = 0.0002558561664 ( 0.0002570770616 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 1 ( 1 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = CYAN1 ( CYAN1 )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 1 ( 1 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 10 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { CYAN1 } -nbcolors 1 -layers { 1 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 1 -face 44 -shape 287
+checkstatshape res_1 -solid 0 -shell 1 -face 44 -freewire 0 -freeedge 0 -sharededge 118
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.004260923847 -avg 0.0002570770616]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 10 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { CYAN1 } -nbcolors 1 -layers { 1 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 1 -face 44 -shape 287 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 1 -face 44 -freewire 0 -freeedge 0 -sharededge 118 -max_solid 0 -max_shell 1 -max_face 44 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.004260923847 -avg 0.0002558561664 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename screw.step
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 10 ( 10 ) Summary = 58 ( 58 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 10 ( 10 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 22 ( 22 )
-TOLERANCE : MaxTol = 0.0003003031941 ( 0.0003002846181 ) AvgTol = 7.010353348e-005 ( 7.009904529e-005 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 10 -shape 58
+checkstatshape res_1 -solid 1 -shell 1 -face 10 -freewire 0 -freeedge 0 -sharededge 22
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.0003002846181 -avg 7.009904529e-005]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 10 -shape 58 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 10 -freewire 0 -freeedge 0 -sharededge 22 -max_solid 1 -max_shell 1 -max_face 10 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.0003003031941 -avg 7.010353348e-005 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename sg_50_63.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 24 ( 24 ) Summary = 146 ( 146 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 24 ( 24 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 54 ( 54 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1.000100003e-007 ) AvgTol = 1.00006207e-007 ( 1.00006207e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 24 -shape 146
+checkstatshape res_1 -solid 1 -shell 1 -face 24 -freewire 0 -freeedge 0 -sharededge 54
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-007 -avg 1.00006207e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 24 -shape 146 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 24 -freewire 0 -freeedge 0 -sharededge 54 -max_solid 1 -max_shell 1 -max_face 24 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.00006207e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename stepsphere.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 1 ( 1 ) Summary = 9 ( 9 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 1 ( 1 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 3 ( 3 )
-TOLERANCE : MaxTol = 1e-007 ( 1e-007 ) AvgTol = 1e-007 ( 1e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 1 -shape 9
+checkstatshape res_1 -solid 1 -shell 1 -face 1 -freewire 0 -freeedge 0 -sharededge 3
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-007 -avg 1e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 1 -shape 9 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 1 -freewire 0 -freeedge 0 -sharededge 3 -max_solid 1 -max_shell 1 -max_face 1 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1e-007 -avg 1e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename t3n.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 1 ( 1 ) Summary = 11 ( 11 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 1 ( 1 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 4 ( 4 )
-TOLERANCE : MaxTol = 1e-007 ( 1e-007 ) AvgTol = 1e-007 ( 1e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 1 -face 1 -shape 11
+checkstatshape res_1 -solid 0 -shell 1 -face 1 -freewire 0 -freeedge 0 -sharededge 4
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-007 -avg 1e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 1 -face 1 -shape 11 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 1 -face 1 -freewire 0 -freeedge 0 -sharededge 4 -max_solid 0 -max_shell 1 -max_face 1 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1e-007 -avg 1e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename t4mid.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 1 ) Summary = 0 ( 1 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 10 ( 10 ) Summary = 75 ( 75 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 10 ( 10 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 31 ( 31 )
-TOLERANCE : MaxTol = 0.00375449653 ( 0.00375449654 ) AvgTol = 0.0006676682327 ( 0.0006676682342 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 1 -face 10 -shape 75
+checkstatshape res_1 -solid 0 -shell 1 -face 10 -freewire 0 -freeedge 0 -sharededge 31
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.00375449654 -avg 0.0006676682342]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 1 -face 10 -shape 75 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 1 -face 10 -freewire 0 -freeedge 0 -sharededge 31 -max_solid 0 -max_shell 1 -max_face 10 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.00375449653 -avg 0.0006676682327 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename t4mpe.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 13 ( 13 ) Face = 13 ( 13 ) Summary = 151 ( 151 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 13 ( 13 ) Face = 13 ( 13 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 55 ( 55 )
-TOLERANCE : MaxTol = 0.004199466556 ( 0.03863716718 ) AvgTol = 0.0004345787725 ( 0.002293953678 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 13 -face 13 -shape 151
+checkstatshape res_1 -solid 0 -shell 13 -face 13 -freewire 0 -freeedge 0 -sharededge 55
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.03863716718 -avg 0.002293953678]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 13 -face 13 -shape 151 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 13 -face 13 -freewire 0 -freeedge 0 -sharededge 55 -max_solid 0 -max_shell 13 -max_face 13 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.004199466556 -avg 0.0004345787725 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename tr8_as2_tc.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 19 ) Summary = 0 ( 19 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 5 ( 5 ) Shell = 5 ( 5 ) Face = 53 ( 53 ) Summary = 353 ( 353 )
-STATSHAPE : Solid = 18 ( 18 ) Shell = 18 ( 18 ) Face = 160 ( 160 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 126 ( 126 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1.000100003e-007 ) AvgTol = 1.000062348e-007 ( 1.000062348e-007 )
-LABELS : N0Labels = 9 ( 9 ) N1Labels = 13 ( 13 ) N2Labels = 0 ( 0 ) TotalLabels = 22 ( 22 ) NameLabels = 22 ( 22 ) ColorLabels = 0 ( 0 ) LayerLabels = 5 ( 5 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 000 ( 000 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 19 -max_faults 0
+checkxstat D_First -n0 9 -n1 13 -n2 0 -total 22 -withname 22 -withcolor 0 -withlayer 5 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { 000 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 5 -shell 5 -face 53 -shape 353
+checkstatshape res_1 -solid 18 -shell 18 -face 160 -freewire 0 -freeedge 0 -sharededge 126
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-007 -avg 1.000062348e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 19 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 9 -n1 13 -n2 0 -total 22 -withname 22 -withcolor 0 -withlayer 5 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 9 -n1 13 -n2 0 -total 22 -withname 22 -withcolor 0 -withlayer 5 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { 000 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 5 -shell 5 -face 53 -shape 353 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 18 -shell 18 -face 160 -freewire 0 -freeedge 0 -sharededge 126 -max_solid 18 -max_shell 18 -max_face 160 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.000062348e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename tr8_as2_ug.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 14 ) Summary = 0 ( 14 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 5 ( 5 ) Shell = 5 ( 5 ) Face = 39 ( 39 ) Summary = 269 ( 269 )
-STATSHAPE : Solid = 18 ( 18 ) Shell = 18 ( 18 ) Face = 125 ( 125 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 91 ( 91 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1e-005 ) AvgTol = 1.00006917e-007 ( 2.879948407e-006 )
-LABELS : N0Labels = 9 ( 9 ) N1Labels = 13 ( 13 ) N2Labels = 0 ( 0 ) TotalLabels = 22 ( 22 ) NameLabels = 22 ( 22 ) ColorLabels = 5 ( 5 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 4 ( 4 )
-COLORS : Colors = BLUE1 DARKORANGE1 GREEN RED ( BLUE1 DARKORANGE1 GREEN RED )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 14 -max_faults 0
+checkxstat D_First -n0 9 -n1 13 -n2 0 -total 22 -withname 22 -withcolor 5 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 DARKORANGE1 GREEN RED } -nbcolors 4 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 5 -shell 5 -face 39 -shape 269
+checkstatshape res_1 -solid 18 -shell 18 -face 125 -freewire 0 -freeedge 0 -sharededge 91
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-005 -avg 2.879948407e-006]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 14 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 9 -n1 13 -n2 0 -total 22 -withname 22 -withcolor 5 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 4 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 9 -n1 13 -n2 0 -total 22 -withname 22 -withcolor 5 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 DARKORANGE1 GREEN RED } -nbcolors 4 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 5 -shell 5 -face 39 -shape 269 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 18 -shell 18 -face 125 -freewire 0 -freeedge 0 -sharededge 91 -max_solid 18 -max_shell 18 -max_face 125 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.00006917e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename tr8_bv1_ac.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 3 ( 3 ) Face = 18 ( 18 ) Summary = 100 ( 100 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 3 ( 3 ) Face = 18 ( 18 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 36 ( 36 )
-TOLERANCE : MaxTol = 1e-007 ( 1e-007 ) AvgTol = 1e-007 ( 1e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 3 -face 18 -shape 100
+checkstatshape res_1 -solid 1 -shell 3 -face 18 -freewire 0 -freeedge 0 -sharededge 36
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-007 -avg 1e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 3 -face 18 -shape 100 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 3 -face 18 -freewire 0 -freeedge 0 -sharededge 36 -max_solid 1 -max_shell 3 -max_face 18 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1e-007 -avg 1e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename tr8_bv1_ct.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 3 ( 3 ) Face = 18 ( 18 ) Summary = 100 ( 100 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 3 ( 3 ) Face = 18 ( 18 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 36 ( 36 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1.000100003e-007 ) AvgTol = 1.00009231e-007 ( 1.00009231e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 1 ( 1 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = WHITE ( WHITE )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 0 ( 0 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { 0 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 3 -face 18 -shape 100
+checkstatshape res_1 -solid 1 -shell 3 -face 18 -freewire 0 -freeedge 0 -sharededge 36
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-007 -avg 1.00009231e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { 0 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 3 -face 18 -shape 100 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 3 -face 18 -freewire 0 -freeedge 0 -sharededge 36 -max_solid 1 -max_shell 3 -max_face 18 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.00009231e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename tr8_bv1_db.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 3 ( 3 ) Face = 18 ( 18 ) Summary = 100 ( 100 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 3 ( 3 ) Face = 18 ( 18 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 36 ( 36 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1.000100003e-007 ) AvgTol = 1.00009231e-007 ( 1.00009231e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 1 ( 1 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = WHITE ( WHITE )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 0 ( { 0} )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { " 0" } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 3 -face 18 -shape 100
+checkstatshape res_1 -solid 1 -shell 3 -face 18 -freewire 0 -freeedge 0 -sharededge 36
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-007 -avg 1.00009231e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { 0 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 3 -face 18 -shape 100 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 3 -face 18 -freewire 0 -freeedge 0 -sharededge 36 -max_solid 1 -max_shell 3 -max_face 18 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.00009231e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename tr8_bv1_ec.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 3 ( 3 ) Face = 18 ( 18 ) Summary = 100 ( 100 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 3 ( 3 ) Face = 18 ( 18 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 36 ( 36 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1.000100003e-007 ) AvgTol = 1.00009231e-007 ( 1.00009231e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 3 -face 18 -shape 100
+checkstatshape res_1 -solid 1 -shell 3 -face 18 -freewire 0 -freeedge 0 -sharededge 36
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-007 -avg 1.00009231e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 3 -face 18 -shape 100 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 3 -face 18 -freewire 0 -freeedge 0 -sharededge 36 -max_solid 1 -max_shell 3 -max_face 18 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.00009231e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename tr8_bv1_id.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 3 ( 3 ) Face = 18 ( 18 ) Summary = 100 ( 100 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 3 ( 3 ) Face = 18 ( 18 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 36 ( 36 )
-TOLERANCE : MaxTol = 1e-007 ( 1e-007 ) AvgTol = 1e-007 ( 1e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 36 ( 36 ) N2Labels = 0 ( 0 ) TotalLabels = 37 ( 37 ) NameLabels = 1 ( 1 ) ColorLabels = 37 ( 37 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 3 ( 3 )
-COLORS : Colors = DEEPSKYBLUE2 MAGENTA1 ORANGE ( DEEPSKYBLUE2 MAGENTA1 ORANGE )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 36 -n2 0 -total 37 -withname 1 -withcolor 37 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { DEEPSKYBLUE2 MAGENTA1 ORANGE } -nbcolors 3 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 3 -face 18 -shape 100
+checkstatshape res_1 -solid 1 -shell 3 -face 18 -freewire 0 -freeedge 0 -sharededge 36
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-007 -avg 1e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 36 -n2 0 -total 37 -withname 1 -withcolor 37 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 3 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 36 -n2 0 -total 37 -withname 1 -withcolor 37 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { DEEPSKYBLUE2 MAGENTA1 ORANGE } -nbcolors 3 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 3 -face 18 -shape 100 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 3 -face 18 -freewire 0 -freeedge 0 -sharededge 36 -max_solid 1 -max_shell 3 -max_face 18 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1e-007 -avg 1e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename tr8_bv1a_ec.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 2 ( 2 ) Face = 17 ( 17 ) Summary = 98 ( 98 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 2 ( 2 ) Face = 17 ( 17 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 36 ( 36 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1.000100003e-007 ) AvgTol = 1.000092706e-007 ( 1.000092706e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 2 -face 17 -shape 98
+checkstatshape res_1 -solid 1 -shell 2 -face 17 -freewire 0 -freeedge 0 -sharededge 36
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-007 -avg 1.000092706e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 2 -face 17 -shape 98 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 2 -face 17 -freewire 0 -freeedge 0 -sharededge 36 -max_solid 1 -max_shell 2 -max_face 17 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.000092706e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename tr8_ha1_ct.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 2 ) Summary = 0 ( 2 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 2 ( 2 ) Face = 7 ( 7 ) Summary = 47 ( 47 )
-STATSHAPE : Solid = 2 ( 2 ) Shell = 4 ( 4 ) Face = 14 ( 14 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 16 ( 16 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1.000100003e-007 ) AvgTol = 1.000085716e-007 ( 1.000085716e-007 )
-LABELS : N0Labels = 4 ( 4 ) N1Labels = 5 ( 5 ) N2Labels = 0 ( 0 ) TotalLabels = 9 ( 9 ) NameLabels = 8 ( 8 ) ColorLabels = 2 ( 2 ) LayerLabels = 2 ( 2 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = WHITE ( WHITE )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 0 ( 0 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 2 -max_faults 0
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+checkxstat D_First -n0 4 -n1 5 -n2 0 -total 9 -withname 8 -withcolor 2 -withlayer 2 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { 0 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 2 -face 7 -shape 47
+checkstatshape res_1 -solid 2 -shell 4 -face 14 -freewire 0 -freeedge 0 -sharededge 16
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-007 -avg 1.000085716e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 2 -max_faults 0
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 4 -n1 5 -n2 0 -total 9 -withname 8 -withcolor 2 -withlayer 2 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 4 -n1 5 -n2 0 -total 9 -withname 8 -withcolor 2 -withlayer 2 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { 0 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 2 -face 7 -shape 47 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 2 -shell 4 -face 14 -freewire 0 -freeedge 0 -sharededge 16 -max_solid 2 -max_shell 4 -max_face 14 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.000085716e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename tr8_ha1_id.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 2 ( 2 ) Face = 7 ( 7 ) Summary = 47 ( 47 )
-STATSHAPE : Solid = 2 ( 2 ) Shell = 4 ( 4 ) Face = 14 ( 14 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 16 ( 16 )
-TOLERANCE : MaxTol = 1e-007 ( 1e-007 ) AvgTol = 1e-007 ( 1e-007 )
-LABELS : N0Labels = 4 ( 4 ) N1Labels = 9 ( 9 ) N2Labels = 0 ( 0 ) TotalLabels = 13 ( 13 ) NameLabels = 8 ( 8 ) ColorLabels = 7 ( 7 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = DEEPSKYBLUE2 ORANGERED ( DEEPSKYBLUE2 ORANGERED )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 4 -n1 9 -n2 0 -total 13 -withname 8 -withcolor 7 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { DEEPSKYBLUE2 ORANGERED } -nbcolors 2 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 2 -face 7 -shape 47
+checkstatshape res_1 -solid 2 -shell 4 -face 14 -freewire 0 -freeedge 0 -sharededge 16
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-007 -avg 1e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 4 -n1 9 -n2 0 -total 13 -withname 8 -withcolor 7 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 2 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 4 -n1 9 -n2 0 -total 13 -withname 8 -withcolor 7 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { DEEPSKYBLUE2 ORANGERED } -nbcolors 2 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 2 -face 7 -shape 47 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 2 -shell 4 -face 14 -freewire 0 -freeedge 0 -sharededge 16 -max_solid 2 -max_shell 4 -max_face 14 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1e-007 -avg 1e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename tr8_ha1_tc.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 2 ) Summary = 0 ( 2 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 2 ( 2 ) Face = 7 ( 7 ) Summary = 47 ( 47 )
-STATSHAPE : Solid = 2 ( 2 ) Shell = 4 ( 4 ) Face = 14 ( 14 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 16 ( 16 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1.000100003e-007 ) AvgTol = 1.000085716e-007 ( 1.000085716e-007 )
-LABELS : N0Labels = 2 ( 2 ) N1Labels = 4 ( 4 ) N2Labels = 0 ( 0 ) TotalLabels = 6 ( 6 ) NameLabels = 4 ( 4 ) ColorLabels = 2 ( 2 ) LayerLabels = 2 ( 2 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = DEEPSKYBLUE1 RED ( DEEPSKYBLUE1 RED )
-NLAYERS : NLayers = 2 ( 2 )
-LAYERS : Layers = 001 002 ( 001 002 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+checkxstat D_First -n0 2 -n1 4 -n2 0 -total 6 -withname 4 -withcolor 2 -withlayer 2 -centroid 0 -volume 0 -area 0 -colors { DEEPSKYBLUE1 RED } -nbcolors 2 -layers { 001 002 } -nblayers 2
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 2 -face 7 -shape 47
+checkstatshape res_1 -solid 2 -shell 4 -face 14 -freewire 0 -freeedge 0 -sharededge 16
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-007 -avg 1.000085716e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 2 -n1 4 -n2 0 -total 6 -withname 4 -withcolor 2 -withlayer 2 -centroid 0 -volume 0 -area 0 -nbcolors 2 -nblayers 2
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 2 -n1 4 -n2 0 -total 6 -withname 4 -withcolor 2 -withlayer 2 -centroid 0 -volume 0 -area 0 -colors { DEEPSKYBLUE1 RED } -nbcolors 2 -layers { 001 002 } -nblayers 2
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 2 -face 7 -shape 47 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 2 -shell 4 -face 14 -freewire 0 -freeedge 0 -sharededge 16 -max_solid 2 -max_shell 4 -max_face 14 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.000085716e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename tr9_3dt-sd.stp
-set ref_data {
-DATA : Faulties = 0 ( 3 ) Warnings = 0 ( 0 ) Summary = 0 ( 3 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 6 ( 6 ) Summary = 34 ( 34 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 6 ( 6 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 12 ( 12 )
-TOLERANCE : MaxTol = 1.000100003e-07 ( 1.000100003e-07 ) AvgTol = 1.00009231e-07 ( 1.00009231e-07 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = MATRAGRAY ( MATRAGRAY )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 3
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { MATRAGRAY } -nbcolors 1 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 6 -shape 34
+checkstatshape res_1 -solid 1 -shell 1 -face 6 -freewire 0 -freeedge 0 -sharededge 12
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-07 -avg 1.00009231e-07]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 3
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { MATRAGRAY } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 6 -shape 34 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 6 -freewire 0 -freeedge 0 -sharededge 12 -max_solid 1 -max_shell 1 -max_face 6 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-07 -avg 1.00009231e-07 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename tr9_asd-db.stp
-set ref_data {
-DATA : Faulties = 0 ( 52 ) Warnings = 0 ( 0 ) Summary = 0 ( 52 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 0 ( 0 ) Summary = 49 ( 37 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 0 ( 0 ) FreeWire = 0 ( 0 ) FreeEdge = 12 ( 12 ) SharedEdge = 12 ( 12 )
-TOLERANCE : MaxTol = 1e-07 ( 1e-07 ) AvgTol = 1e-07 ( 1e-07 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 12 ( 12 ) N2Labels = 0 ( 0 ) TotalLabels = 13 ( 13 ) NameLabels = 1 ( 1 ) ColorLabels = 12 ( 12 ) LayerLabels = 12 ( 12 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = GREEN ( GREEN )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 0 ( { 0} )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 52
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 12 -n2 0 -total 13 -withname 1 -withcolor 12 -withlayer 12 -centroid 0 -volume 0 -area 0 -colors { GREEN } -nbcolors 1 -layers { " 0" } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 0 -shape 37
+checkstatshape res_1 -solid 0 -shell 0 -face 0 -freewire 0 -freeedge 12 -sharededge 12
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-07 -avg 1e-07]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 52
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 12 -n2 0 -total 13 -withname 1 -withcolor 12 -withlayer 12 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 12 -n2 0 -total 13 -withname 1 -withcolor 12 -withlayer 12 -centroid 0 -volume 0 -area 0 -colors { GREEN } -nbcolors 1 -layers { 0 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 0 -face 0 -shape 49 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 0 -freewire 0 -freeedge 12 -sharededge 12 -max_solid 0 -max_shell 0 -max_face 0 -max_freewire 0 -max_freeedge 12
+checkmaxtol res_2 -tol 1e-07 -avg 1e-07 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename tr9_bv1-ec.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 3 ( 3 ) Face = 18 ( 18 ) Summary = 100 ( 100 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 3 ( 3 ) Face = 18 ( 18 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 36 ( 36 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1.000100003e-007 ) AvgTol = 1.00009231e-007 ( 1.00009231e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 3 -face 18 -shape 100
+checkstatshape res_1 -solid 1 -shell 3 -face 18 -freewire 0 -freeedge 0 -sharededge 36
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-007 -avg 1.00009231e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 3 -face 18 -shape 100 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 3 -face 18 -freewire 0 -freeedge 0 -sharededge 36 -max_solid 1 -max_shell 3 -max_face 18 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.00009231e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename tr9_bv1-id.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 3 ( 3 ) Face = 18 ( 18 ) Summary = 100 ( 100 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 3 ( 3 ) Face = 18 ( 18 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 36 ( 36 )
-TOLERANCE : MaxTol = 1e-007 ( 1e-007 ) AvgTol = 1e-007 ( 1e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 36 ( 36 ) N2Labels = 0 ( 0 ) TotalLabels = 37 ( 37 ) NameLabels = 1 ( 1 ) ColorLabels = 37 ( 37 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 3 ( 3 )
-COLORS : Colors = DEEPSKYBLUE2 MAGENTA1 ORANGE ( DEEPSKYBLUE2 MAGENTA1 ORANGE )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 36 -n2 0 -total 37 -withname 1 -withcolor 37 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { DEEPSKYBLUE2 MAGENTA1 ORANGE } -nbcolors 3 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 3 -face 18 -shape 100
+checkstatshape res_1 -solid 1 -shell 3 -face 18 -freewire 0 -freeedge 0 -sharededge 36
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-007 -avg 1e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 36 -n2 0 -total 37 -withname 1 -withcolor 37 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 3 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 36 -n2 0 -total 37 -withname 1 -withcolor 37 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { DEEPSKYBLUE2 MAGENTA1 ORANGE } -nbcolors 3 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 3 -face 18 -shape 100 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 3 -face 18 -freewire 0 -freeedge 0 -sharededge 36 -max_solid 1 -max_shell 3 -max_face 18 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1e-007 -avg 1e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename tr9_bv1-pe.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 3 ( 3 ) Face = 18 ( 18 ) Summary = 100 ( 100 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 3 ( 3 ) Face = 18 ( 18 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 36 ( 36 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1.000100003e-007 ) AvgTol = 1.00009231e-007 ( 1.00009231e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 3 -face 18 -shape 100
+checkstatshape res_1 -solid 1 -shell 3 -face 18 -freewire 0 -freeedge 0 -sharededge 36
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-007 -avg 1.00009231e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 3 -face 18 -shape 100 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 3 -face 18 -freewire 0 -freeedge 0 -sharededge 36 -max_solid 1 -max_shell 3 -max_face 18 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.00009231e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename tr9_bv1-tc.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 3 ( 3 ) Face = 18 ( 18 ) Summary = 100 ( 100 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 3 ( 3 ) Face = 18 ( 18 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 36 ( 36 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1.000100003e-007 ) AvgTol = 1.00009231e-007 ( 1.00009231e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 1 ( 1 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = GREEN ( GREEN )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 005 ( 005 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { GREEN } -nbcolors 1 -layers { 005 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 3 -face 18 -shape 100
+checkstatshape res_1 -solid 1 -shell 3 -face 18 -freewire 0 -freeedge 0 -sharededge 36
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-007 -avg 1.00009231e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { GREEN } -nbcolors 1 -layers { 005 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 3 -face 18 -shape 100 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 3 -face 18 -freewire 0 -freeedge 0 -sharededge 36 -max_solid 1 -max_shell 3 -max_face 18 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.00009231e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename tr9_exd-db.stp
-set ref_data {
-DATA : Faulties = 0 ( 18 ) Warnings = 0 ( 0 ) Summary = 0 ( 18 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 0 ( 0 ) Summary = 49 ( 37 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 0 ( 0 ) FreeWire = 0 ( 0 ) FreeEdge = 12 ( 12 ) SharedEdge = 12 ( 12 )
-TOLERANCE : MaxTol = 1e-07 ( 1e-07 ) AvgTol = 1e-07 ( 1e-07 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 12 ( 12 ) N2Labels = 0 ( 0 ) TotalLabels = 13 ( 13 ) NameLabels = 1 ( 1 ) ColorLabels = 12 ( 12 ) LayerLabels = 12 ( 12 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = GREEN ( GREEN )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 0 ( { 0} )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 18
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 12 -n2 0 -total 13 -withname 1 -withcolor 12 -withlayer 12 -centroid 0 -volume 0 -area 0 -colors { GREEN } -nbcolors 1 -layers { " 0" } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 0 -shape 37
+checkstatshape res_1 -solid 0 -shell 0 -face 0 -freewire 0 -freeedge 12 -sharededge 12
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-07 -avg 1e-07]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 18
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 12 -n2 0 -total 13 -withname 1 -withcolor 12 -withlayer 12 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 12 -n2 0 -total 13 -withname 1 -withcolor 12 -withlayer 12 -centroid 0 -volume 0 -area 0 -colors { GREEN } -nbcolors 1 -layers { 0 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 0 -face 0 -shape 49 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 0 -freewire 0 -freeedge 12 -sharededge 12 -max_solid 0 -max_shell 0 -max_face 0 -max_freewire 0 -max_freeedge 12
+checkmaxtol res_2 -tol 1e-07 -avg 1e-07 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj10_ch1-id-chs.stp
-set ref_data {
-DATA : Faulties = 0 ( 4 ) Warnings = 0 ( 0 ) Summary = 0 ( 4 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 3 ( 3 ) Summary = 3 ( 3 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 12 ( 12 ) Summary = 73 ( 73 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 12 ( 12 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 28 ( 28 )
-TOLERANCE : MaxTol = 1e-07 ( 1e-07 ) AvgTol = 1e-07 ( 1e-07 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 4
+checkdoc "tpstat c" -max_warns 3 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 12 -shape 73
+checkstatshape res_1 -solid 1 -shell 1 -face 12 -freewire 0 -freeedge 0 -sharededge 28
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-07 -avg 1e-07]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 4
+checkdoc "tpstat c" -max_warns 3 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 3 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 12 -shape 73 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 12 -freewire 0 -freeedge 0 -sharededge 28 -max_solid 1 -max_shell 1 -max_face 12 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1e-07 -avg 1e-07 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj10_ch1-tu-203.stp
-set ref_data {
-DATA : Faulties = 0 ( 4 ) Warnings = 0 ( 0 ) Summary = 0 ( 4 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 1 ) Summary = 0 ( 1 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 0 ( 0 ) Summary = 2 ( 2 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 0 ( 0 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 0 ( 0 )
-TOLERANCE : MaxTol = 1e-07 ( 1e-07 ) AvgTol = 1e-07 ( 1e-07 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 4
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 0 -shape 2
+checkstatshape res_1 -solid 0 -shell 0 -face 0 -freewire 0 -freeedge 0 -sharededge 0
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-07 -avg 1e-07]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 4
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 0 -face 0 -shape 2 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 0 -freewire 0 -freeedge 0 -sharededge 0 -max_solid 0 -max_shell 0 -max_face 0 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1e-07 -avg 1e-07 -max_tol ${max_tol_res_1}
+
#puts "TODO OCC25848 Windows: LABELS : Faulty"
#puts "TODO OCC25848 Windows: Error : 1 differences with reference data found"
-# !!!! This file is generated automatically, do not edit manually! See end script
set filename trj12_gd1-id-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 1 ) Warnings = 0 ( 2 ) Summary = 0 ( 3 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 1 ( 1 ) Summary = 1 ( 1 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 7 ( 7 ) Summary = 43 ( 43 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 7 ( 7 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 15 ( 15 )
-TOLERANCE : MaxTol = 1e-07 ( 1e-07 ) AvgTol = 1e-07 ( 1e-07 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 6 ( 6 ) N2Labels = 0 ( 0 ) TotalLabels = 7 ( 7 ) NameLabels = 1 ( 1 ) ColorLabels = 4 ( 4 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 1 ( 1 ) Volume = 1 ( 1 ) Area = 1 ( 1 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = MAGENTA1 RED ( MAGENTA1 RED )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 2 -max_faults 1
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+checkxstat D_First -n0 1 -n1 6 -n2 0 -total 7 -withname 1 -withcolor 4 -withlayer 0 -centroid 1 -volume 1 -area 1 -colors { MAGENTA1 RED } -nbcolors 2 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 7 -shape 43
+checkstatshape res_1 -solid 1 -shell 1 -face 7 -freewire 0 -freeedge 0 -sharededge 15
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-07 -avg 1e-07]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 2 -max_faults 1
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 6 -n2 0 -total 7 -withname 1 -withcolor 4 -withlayer 0 -centroid 1 -volume 1 -area 1 -nbcolors 2 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 6 -n2 0 -total 7 -withname 1 -withcolor 4 -withlayer 0 -centroid 1 -volume 1 -area 1 -colors { MAGENTA1 RED } -nbcolors 2 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 7 -shape 43 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 7 -freewire 0 -freeedge 0 -sharededge 15 -max_solid 1 -max_shell 1 -max_face 7 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1e-07 -avg 1e-07 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj12_is1-oc-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 6 ( 6 ) Summary = 35 ( 35 )
-STATSHAPE : Solid = 5 ( 5 ) Shell = 5 ( 5 ) Face = 30 ( 30 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 12 ( 12 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1.000100003e-007 ) AvgTol = 1.00009231e-007 ( 1.00009231e-007 )
-LABELS : N0Labels = 2 ( 2 ) N1Labels = 5 ( 5 ) N2Labels = 0 ( 0 ) TotalLabels = 7 ( 7 ) NameLabels = 7 ( 7 ) ColorLabels = 3 ( 3 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = RED YELLOW ( RED YELLOW )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 2 -n1 5 -n2 0 -total 7 -withname 7 -withcolor 3 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { RED YELLOW } -nbcolors 2 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 6 -shape 35
+checkstatshape res_1 -solid 5 -shell 5 -face 30 -freewire 0 -freeedge 0 -sharededge 12
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-007 -avg 1.00009231e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 2 -n1 5 -n2 0 -total 7 -withname 7 -withcolor 3 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 2 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 2 -n1 5 -n2 0 -total 7 -withname 7 -withcolor 3 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { RED YELLOW } -nbcolors 2 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 6 -shape 35 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 5 -shell 5 -face 30 -freewire 0 -freeedge 0 -sharededge 12 -max_solid 5 -max_shell 5 -max_face 30 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.00009231e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj2_as1-ac-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 5 ( 5 ) Shell = 5 ( 5 ) Face = 53 ( 53 ) Summary = 353 ( 353 )
-STATSHAPE : Solid = 18 ( 18 ) Shell = 18 ( 18 ) Face = 160 ( 160 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 126 ( 126 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1.000100003e-007 ) AvgTol = 1.000062348e-007 ( 1.000062348e-007 )
-LABELS : N0Labels = 9 ( 9 ) N1Labels = 13 ( 13 ) N2Labels = 0 ( 0 ) TotalLabels = 22 ( 22 ) NameLabels = 22 ( 22 ) ColorLabels = 5 ( 5 ) LayerLabels = 5 ( 5 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 5 ( 5 )
-COLORS : Colors = BLUE1 CYAN1 GREEN RED YELLOW ( BLUE1 CYAN1 GREEN RED YELLOW )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 0 ( 0 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 9 -n1 13 -n2 0 -total 22 -withname 22 -withcolor 5 -withlayer 5 -centroid 0 -volume 0 -area 0 -colors { BLUE1 CYAN1 GREEN RED YELLOW } -nbcolors 5 -layers { 0 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 5 -shell 5 -face 53 -shape 353
+checkstatshape res_1 -solid 18 -shell 18 -face 160 -freewire 0 -freeedge 0 -sharededge 126
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-007 -avg 1.000062348e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 9 -n1 13 -n2 0 -total 22 -withname 22 -withcolor 5 -withlayer 5 -centroid 0 -volume 0 -area 0 -nbcolors 5 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 9 -n1 13 -n2 0 -total 22 -withname 22 -withcolor 5 -withlayer 5 -centroid 0 -volume 0 -area 0 -colors { BLUE1 CYAN1 GREEN RED YELLOW } -nbcolors 5 -layers { 0 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 5 -shell 5 -face 53 -shape 353 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 18 -shell 18 -face 160 -freewire 0 -freeedge 0 -sharededge 126 -max_solid 18 -max_shell 18 -max_face 160 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.000062348e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj2_as1-md-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 14 ) Summary = 0 ( 14 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 5 ( 5 ) Shell = 5 ( 5 ) Face = 39 ( 39 ) Summary = 279 ( 279 )
-STATSHAPE : Solid = 18 ( 18 ) Shell = 18 ( 18 ) Face = 125 ( 125 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 96 ( 96 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1e-005 ) AvgTol = 1.00006872e-007 ( 2.814611181e-006 )
-LABELS : N0Labels = 9 ( 9 ) N1Labels = 13 ( 13 ) N2Labels = 0 ( 0 ) TotalLabels = 22 ( 22 ) NameLabels = 22 ( 22 ) ColorLabels = 5 ( 5 ) LayerLabels = 5 ( 5 )
-PROPS : Centroid = 9 ( 9 ) Volume = 9 ( 9 ) Area = 9 ( 9 )
-NCOLORS : NColors = 3 ( 3 )
-COLORS : Colors = BLUE1 GREEN RED ( BLUE1 GREEN RED )
-NLAYERS : NLayers = 3 ( 3 )
-LAYERS : Layers = 1 2 3 ( 1 2 3 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 14 -max_faults 0
+checkxstat D_First -n0 9 -n1 13 -n2 0 -total 22 -withname 22 -withcolor 5 -withlayer 5 -centroid 9 -volume 9 -area 9 -colors { BLUE1 GREEN RED } -nbcolors 3 -layers { 1 2 3 } -nblayers 3
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 5 -shell 5 -face 39 -shape 279
+checkstatshape res_1 -solid 18 -shell 18 -face 125 -freewire 0 -freeedge 0 -sharededge 96
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-005 -avg 2.814611181e-006]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 14 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 9 -n1 13 -n2 0 -total 22 -withname 22 -withcolor 5 -withlayer 5 -centroid 9 -volume 9 -area 9 -nbcolors 3 -nblayers 3
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 9 -n1 13 -n2 0 -total 22 -withname 22 -withcolor 5 -withlayer 5 -centroid 9 -volume 9 -area 9 -colors { BLUE1 GREEN RED } -nbcolors 3 -layers { 1 2 3 } -nblayers 3
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 5 -shell 5 -face 39 -shape 279 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 18 -shell 18 -face 125 -freewire 0 -freeedge 0 -sharededge 96 -max_solid 18 -max_shell 18 -max_face 125 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.00006872e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj2_as1-ug-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 14 ) Summary = 0 ( 14 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 5 ( 5 ) Shell = 5 ( 5 ) Face = 39 ( 39 ) Summary = 269 ( 269 )
-STATSHAPE : Solid = 18 ( 18 ) Shell = 18 ( 18 ) Face = 125 ( 125 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 91 ( 91 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1e-005 ) AvgTol = 1.00006917e-007 ( 2.879948407e-006 )
-LABELS : N0Labels = 9 ( 9 ) N1Labels = 13 ( 13 ) N2Labels = 0 ( 0 ) TotalLabels = 22 ( 22 ) NameLabels = 22 ( 22 ) ColorLabels = 5 ( 5 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 9 ( 9 ) Volume = 9 ( 9 ) Area = 9 ( 9 )
-NCOLORS : NColors = 3 ( 3 )
-COLORS : Colors = BLUE1 GREEN RED ( BLUE1 GREEN RED )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 14 -max_faults 0
+checkxstat D_First -n0 9 -n1 13 -n2 0 -total 22 -withname 22 -withcolor 5 -withlayer 0 -centroid 9 -volume 9 -area 9 -colors { BLUE1 GREEN RED } -nbcolors 3 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 5 -shell 5 -face 39 -shape 269
+checkstatshape res_1 -solid 18 -shell 18 -face 125 -freewire 0 -freeedge 0 -sharededge 91
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-005 -avg 2.879948407e-006]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 14 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 9 -n1 13 -n2 0 -total 22 -withname 22 -withcolor 5 -withlayer 0 -centroid 9 -volume 9 -area 9 -nbcolors 3 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 9 -n1 13 -n2 0 -total 22 -withname 22 -withcolor 5 -withlayer 0 -centroid 9 -volume 9 -area 9 -colors { BLUE1 GREEN RED } -nbcolors 3 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 5 -shell 5 -face 39 -shape 269 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 18 -shell 18 -face 125 -freewire 0 -freeedge 0 -sharededge 91 -max_solid 18 -max_shell 18 -max_face 125 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.00006917e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj2_d2-db-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 178 ) Warnings = 0 ( 0 ) Summary = 0 ( 178 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 9 ( 9 ) Summary = 55 ( 55 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 9 ( 9 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 21 ( 21 )
-TOLERANCE : MaxTol = 1.000100003e-07 ( 1.000100003e-07 ) AvgTol = 1.000093336e-07 ( 1.000093336e-07 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 1 ( 1 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = WHITE ( WHITE )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 0 ( { 0} )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 178
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { " 0" } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 9 -shape 55
+checkstatshape res_1 -solid 1 -shell 1 -face 9 -freewire 0 -freeedge 0 -sharededge 21
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-07 -avg 1.000093336e-07]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 178
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { 0 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 9 -shape 55 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 9 -freewire 0 -freeedge 0 -sharededge 21 -max_solid 1 -max_shell 1 -max_face 9 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-07 -avg 1.000093336e-07 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj2_io1-ac-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 19 ) Warnings = 0 ( 0 ) Summary = 0 ( 19 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 29 ( 29 ) Summary = 194 ( 194 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 29 ( 29 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 70 ( 70 )
-TOLERANCE : MaxTol = 1.00005e-07 ( 1.00005e-07 ) AvgTol = 1.000039198e-07 ( 1.000039198e-07 )
-LABELS : N0Labels = 2 ( 2 ) N1Labels = 1 ( 1 ) N2Labels = 0 ( 0 ) TotalLabels = 3 ( 3 ) NameLabels = 3 ( 3 ) ColorLabels = 1 ( 1 ) LayerLabels = 1 ( 1 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = YELLOW ( YELLOW )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 0 ( 0 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 19
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 2 -n1 1 -n2 0 -total 3 -withname 3 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { YELLOW } -nbcolors 1 -layers { 0 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 29 -shape 194
+checkstatshape res_1 -solid 1 -shell 1 -face 29 -freewire 0 -freeedge 0 -sharededge 70
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.00005e-07 -avg 1.000039198e-07]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 19
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 2 -n1 1 -n2 0 -total 3 -withname 3 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 2 -n1 1 -n2 0 -total 3 -withname 3 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { YELLOW } -nbcolors 1 -layers { 0 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 29 -shape 194 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 29 -freewire 0 -freeedge 0 -sharededge 70 -max_solid 1 -max_shell 1 -max_face 29 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.00005e-07 -avg 1.000039198e-07 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj2_io1-ct-203.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 29 ( 29 ) Summary = 193 ( 193 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 29 ( 29 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 70 ( 70 )
-TOLERANCE : MaxTol = 0.0007775016544 ( 0.0007775016545 ) AvgTol = 6.177786288e-005 ( 6.177786287e-005 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 26 ( 26 ) N2Labels = 0 ( 0 ) TotalLabels = 27 ( 27 ) NameLabels = 1 ( 1 ) ColorLabels = 27 ( 27 ) LayerLabels = 1 ( 1 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 3 ( 3 )
-COLORS : Colors = BLUE1 RED YELLOW ( BLUE1 RED YELLOW )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 0 ( 0 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 26 -n2 0 -total 27 -withname 1 -withcolor 27 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { BLUE1 RED YELLOW } -nbcolors 3 -layers { 0 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 29 -shape 193
+checkstatshape res_1 -solid 1 -shell 1 -face 29 -freewire 0 -freeedge 0 -sharededge 70
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.0007775016545 -avg 6.177786287e-005]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 26 -n2 0 -total 27 -withname 1 -withcolor 27 -withlayer 1 -centroid 0 -volume 0 -area 0 -nbcolors 3 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 26 -n2 0 -total 27 -withname 1 -withcolor 27 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { BLUE1 RED YELLOW } -nbcolors 3 -layers { 0 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 29 -shape 193 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 29 -freewire 0 -freeedge 0 -sharededge 70 -max_solid 1 -max_shell 1 -max_face 29 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.0007775016544 -avg 6.177786288e-005 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj2_io1-ec-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 17 ( 17 ) Summary = 111 ( 111 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 17 ( 17 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 35 ( 35 )
-TOLERANCE : MaxTol = 1.00005e-007 ( 1.00005e-007 ) AvgTol = 1.000038767e-007 ( 1.000038767e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 13 ( 13 ) N2Labels = 0 ( 0 ) TotalLabels = 14 ( 14 ) NameLabels = 1 ( 1 ) ColorLabels = 14 ( 14 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 3 ( 3 )
-COLORS : Colors = BLUE1 RED YELLOW ( BLUE1 RED YELLOW )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 13 -n2 0 -total 14 -withname 1 -withcolor 14 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 RED YELLOW } -nbcolors 3 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 17 -shape 111
+checkstatshape res_1 -solid 1 -shell 1 -face 17 -freewire 0 -freeedge 0 -sharededge 35
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.00005e-007 -avg 1.000038767e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 13 -n2 0 -total 14 -withname 1 -withcolor 14 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 3 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 13 -n2 0 -total 14 -withname 1 -withcolor 14 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 RED YELLOW } -nbcolors 3 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 17 -shape 111 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 17 -freewire 0 -freeedge 0 -sharededge 35 -max_solid 1 -max_shell 1 -max_face 17 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.00005e-007 -avg 1.000038767e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj2_io1-id-203.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 12 ( 12 ) Summary = 12 ( 12 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 17 ( 17 ) Summary = 111 ( 111 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 17 ( 17 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 35 ( 35 )
-TOLERANCE : MaxTol = 1e-007 ( 1e-007 ) AvgTol = 1e-007 ( 1e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 16 ( 16 ) N2Labels = 0 ( 0 ) TotalLabels = 17 ( 17 ) NameLabels = 1 ( 1 ) ColorLabels = 17 ( 17 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 3 ( 3 )
-COLORS : Colors = BLUE1 RED YELLOW ( BLUE1 RED YELLOW )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 12 -max_faults 0
+checkxstat D_First -n0 1 -n1 16 -n2 0 -total 17 -withname 1 -withcolor 17 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 RED YELLOW } -nbcolors 3 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 17 -shape 111
+checkstatshape res_1 -solid 1 -shell 1 -face 17 -freewire 0 -freeedge 0 -sharededge 35
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-007 -avg 1e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 12 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 12 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 16 -n2 0 -total 17 -withname 1 -withcolor 17 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 3 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 16 -n2 0 -total 17 -withname 1 -withcolor 17 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 RED YELLOW } -nbcolors 3 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 17 -shape 111 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 17 -freewire 0 -freeedge 0 -sharededge 35 -max_solid 1 -max_shell 1 -max_face 17 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1e-007 -avg 1e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj2_io1-in-203.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 29 ( 29 ) Summary = 193 ( 193 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 29 ( 29 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 70 ( 70 )
-TOLERANCE : MaxTol = 1.00005e-007 ( 1.00005e-007 ) AvgTol = 1.000039198e-007 ( 1.000039198e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 29 -shape 193
+checkstatshape res_1 -solid 1 -shell 1 -face 29 -freewire 0 -freeedge 0 -sharededge 70
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.00005e-007 -avg 1.000039198e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 29 -shape 193 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 29 -freewire 0 -freeedge 0 -sharededge 70 -max_solid 1 -max_shell 1 -max_face 29 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.00005e-007 -avg 1.000039198e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj2_io1-tc-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 7 ) Warnings = 0 ( 0 ) Summary = 0 ( 7 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 16 ) Summary = 0 ( 16 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 29 ( 29 ) Summary = 193 ( 193 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 29 ( 29 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 70 ( 70 )
-TOLERANCE : MaxTol = 1.00005e-07 ( 1.00005e-07 ) AvgTol = 1.000039198e-07 ( 1.000039198e-07 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 32 ( 32 ) N2Labels = 0 ( 0 ) TotalLabels = 33 ( 33 ) NameLabels = 1 ( 1 ) ColorLabels = 33 ( 33 ) LayerLabels = 1 ( 1 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 3 ( 3 )
-COLORS : Colors = BLUE1 RED YELLOW ( BLUE1 RED YELLOW )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 010 ( 010 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 7
+checkdoc "tpstat c" -max_warns 16 -max_faults 0
+checkxstat D_First -n0 1 -n1 32 -n2 0 -total 33 -withname 1 -withcolor 33 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { BLUE1 RED YELLOW } -nbcolors 3 -layers { 010 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 29 -shape 193
+checkstatshape res_1 -solid 1 -shell 1 -face 29 -freewire 0 -freeedge 0 -sharededge 70
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.00005e-07 -avg 1.000039198e-07]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 7
+checkdoc "tpstat c" -max_warns 16 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 32 -n2 0 -total 33 -withname 1 -withcolor 33 -withlayer 1 -centroid 0 -volume 0 -area 0 -nbcolors 3 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 32 -n2 0 -total 33 -withname 1 -withcolor 33 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { BLUE1 RED YELLOW } -nbcolors 3 -layers { 010 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 29 -shape 193 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 29 -freewire 0 -freeedge 0 -sharededge 70 -max_solid 1 -max_shell 1 -max_face 29 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.00005e-07 -avg 1.000039198e-07 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj2_io1-ug-203.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 12 ) Summary = 0 ( 12 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 17 ( 17 ) Summary = 121 ( 121 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 17 ( 17 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 40 ( 40 )
-TOLERANCE : MaxTol = 1.00005e-007 ( 1e-005 ) AvgTol = 1.000040078e-007 ( 6.417511167e-006 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 1 ( 1 ) N2Labels = 0 ( 0 ) TotalLabels = 2 ( 2 ) NameLabels = 1 ( 1 ) ColorLabels = 2 ( 2 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = RED YELLOW ( RED YELLOW )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 12 -max_faults 0
+checkxstat D_First -n0 1 -n1 1 -n2 0 -total 2 -withname 1 -withcolor 2 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { RED YELLOW } -nbcolors 2 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 17 -shape 121
+checkstatshape res_1 -solid 1 -shell 1 -face 17 -freewire 0 -freeedge 0 -sharededge 40
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-005 -avg 6.417511167e-006]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 12 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 1 -n2 0 -total 2 -withname 1 -withcolor 2 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 2 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 1 -n2 0 -total 2 -withname 1 -withcolor 2 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { RED YELLOW } -nbcolors 2 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 17 -shape 121 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 17 -freewire 0 -freeedge 0 -sharededge 40 -max_solid 1 -max_shell 1 -max_face 17 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.00005e-007 -avg 1.000040078e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj2_io1-ug-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 12 ) Summary = 0 ( 12 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 17 ( 17 ) Summary = 121 ( 121 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 17 ( 17 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 40 ( 40 )
-TOLERANCE : MaxTol = 1.00005e-007 ( 1e-005 ) AvgTol = 1.000040078e-007 ( 6.417511167e-006 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 1 ( 1 ) N2Labels = 0 ( 0 ) TotalLabels = 2 ( 2 ) NameLabels = 1 ( 1 ) ColorLabels = 2 ( 2 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = RED YELLOW ( RED YELLOW )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 12 -max_faults 0
+checkxstat D_First -n0 1 -n1 1 -n2 0 -total 2 -withname 1 -withcolor 2 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { RED YELLOW } -nbcolors 2 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 17 -shape 121
+checkstatshape res_1 -solid 1 -shell 1 -face 17 -freewire 0 -freeedge 0 -sharededge 40
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-005 -avg 6.417511167e-006]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 12 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 1 -n2 0 -total 2 -withname 1 -withcolor 2 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 2 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 1 -n2 0 -total 2 -withname 1 -withcolor 2 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { RED YELLOW } -nbcolors 2 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 17 -shape 121 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 17 -freewire 0 -freeedge 0 -sharededge 40 -max_solid 1 -max_shell 1 -max_face 17 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.00005e-007 -avg 1.000040078e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj3_as1-ac-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 5 ( 5 ) Shell = 5 ( 5 ) Face = 53 ( 53 ) Summary = 353 ( 353 )
-STATSHAPE : Solid = 18 ( 18 ) Shell = 18 ( 18 ) Face = 160 ( 160 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 126 ( 126 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1.000100003e-007 ) AvgTol = 1.000062348e-007 ( 1.000062348e-007 )
-LABELS : N0Labels = 9 ( 9 ) N1Labels = 13 ( 13 ) N2Labels = 0 ( 0 ) TotalLabels = 22 ( 22 ) NameLabels = 22 ( 22 ) ColorLabels = 5 ( 5 ) LayerLabels = 5 ( 5 )
-PROPS : Centroid = 9 ( 9 ) Volume = 9 ( 9 ) Area = 9 ( 9 )
-NCOLORS : NColors = 3 ( 3 )
-COLORS : Colors = BLUE1 GREEN RED ( BLUE1 GREEN RED )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 0 ( 0 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 9 -n1 13 -n2 0 -total 22 -withname 22 -withcolor 5 -withlayer 5 -centroid 9 -volume 9 -area 9 -colors { BLUE1 GREEN RED } -nbcolors 3 -layers { 0 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 5 -shell 5 -face 53 -shape 353
+checkstatshape res_1 -solid 18 -shell 18 -face 160 -freewire 0 -freeedge 0 -sharededge 126
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-007 -avg 1.000062348e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 9 -n1 13 -n2 0 -total 22 -withname 22 -withcolor 5 -withlayer 5 -centroid 9 -volume 9 -area 9 -nbcolors 3 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 9 -n1 13 -n2 0 -total 22 -withname 22 -withcolor 5 -withlayer 5 -centroid 9 -volume 9 -area 9 -colors { BLUE1 GREEN RED } -nbcolors 3 -layers { 0 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 5 -shell 5 -face 53 -shape 353 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 18 -shell 18 -face 160 -freewire 0 -freeedge 0 -sharededge 126 -max_solid 18 -max_shell 18 -max_face 160 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.000062348e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj3_as1-md-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 14 ) Summary = 0 ( 14 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 5 ( 5 ) Shell = 5 ( 5 ) Face = 39 ( 39 ) Summary = 279 ( 279 )
-STATSHAPE : Solid = 18 ( 18 ) Shell = 18 ( 18 ) Face = 125 ( 125 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 96 ( 96 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1e-005 ) AvgTol = 1.00006872e-007 ( 2.814611181e-006 )
-LABELS : N0Labels = 9 ( 9 ) N1Labels = 13 ( 13 ) N2Labels = 0 ( 0 ) TotalLabels = 22 ( 22 ) NameLabels = 22 ( 22 ) ColorLabels = 5 ( 5 ) LayerLabels = 5 ( 5 )
-PROPS : Centroid = 9 ( 9 ) Volume = 9 ( 9 ) Area = 9 ( 9 )
-NCOLORS : NColors = 3 ( 3 )
-COLORS : Colors = BLUE1 GREEN RED ( BLUE1 GREEN RED )
-NLAYERS : NLayers = 3 ( 3 )
-LAYERS : Layers = 1 2 3 ( 1 2 3 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 14 -max_faults 0
+checkxstat D_First -n0 9 -n1 13 -n2 0 -total 22 -withname 22 -withcolor 5 -withlayer 5 -centroid 9 -volume 9 -area 9 -colors { BLUE1 GREEN RED } -nbcolors 3 -layers { 1 2 3 } -nblayers 3
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 5 -shell 5 -face 39 -shape 279
+checkstatshape res_1 -solid 18 -shell 18 -face 125 -freewire 0 -freeedge 0 -sharededge 96
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-005 -avg 2.814611181e-006]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 14 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 9 -n1 13 -n2 0 -total 22 -withname 22 -withcolor 5 -withlayer 5 -centroid 9 -volume 9 -area 9 -nbcolors 3 -nblayers 3
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 9 -n1 13 -n2 0 -total 22 -withname 22 -withcolor 5 -withlayer 5 -centroid 9 -volume 9 -area 9 -colors { BLUE1 GREEN RED } -nbcolors 3 -layers { 1 2 3 } -nblayers 3
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 5 -shell 5 -face 39 -shape 279 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 18 -shell 18 -face 125 -freewire 0 -freeedge 0 -sharededge 96 -max_solid 18 -max_shell 18 -max_face 125 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.00006872e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj3_as1-ug-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 14 ) Summary = 0 ( 14 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 5 ( 5 ) Shell = 5 ( 5 ) Face = 39 ( 39 ) Summary = 269 ( 269 )
-STATSHAPE : Solid = 18 ( 18 ) Shell = 18 ( 18 ) Face = 125 ( 125 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 91 ( 91 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1e-005 ) AvgTol = 1.00006917e-007 ( 2.879948407e-006 )
-LABELS : N0Labels = 9 ( 9 ) N1Labels = 13 ( 13 ) N2Labels = 0 ( 0 ) TotalLabels = 22 ( 22 ) NameLabels = 22 ( 22 ) ColorLabels = 5 ( 5 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 9 ( 9 ) Volume = 9 ( 9 ) Area = 9 ( 9 )
-NCOLORS : NColors = 3 ( 3 )
-COLORS : Colors = BLUE1 GREEN RED ( BLUE1 GREEN RED )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 14 -max_faults 0
+checkxstat D_First -n0 9 -n1 13 -n2 0 -total 22 -withname 22 -withcolor 5 -withlayer 0 -centroid 9 -volume 9 -area 9 -colors { BLUE1 GREEN RED } -nbcolors 3 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 5 -shell 5 -face 39 -shape 269
+checkstatshape res_1 -solid 18 -shell 18 -face 125 -freewire 0 -freeedge 0 -sharededge 91
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-005 -avg 2.879948407e-006]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 14 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 9 -n1 13 -n2 0 -total 22 -withname 22 -withcolor 5 -withlayer 0 -centroid 9 -volume 9 -area 9 -nbcolors 3 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 9 -n1 13 -n2 0 -total 22 -withname 22 -withcolor 5 -withlayer 0 -centroid 9 -volume 9 -area 9 -colors { BLUE1 GREEN RED } -nbcolors 3 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 5 -shell 5 -face 39 -shape 269 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 18 -shell 18 -face 125 -freewire 0 -freeedge 0 -sharededge 91 -max_solid 18 -max_shell 18 -max_face 125 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.00006917e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj3_d1-pe-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 8 ) Warnings = 0 ( 0 ) Summary = 0 ( 8 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 9 ( 9 ) Summary = 55 ( 55 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 9 ( 9 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 21 ( 21 )
-TOLERANCE : MaxTol = 1.000100003e-07 ( 1.000100003e-07 ) AvgTol = 1.000093336e-07 ( 1.000093336e-07 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 8
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 9 -shape 55
+checkstatshape res_1 -solid 1 -shell 1 -face 9 -freewire 0 -freeedge 0 -sharededge 21
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-07 -avg 1.000093336e-07]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 8
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 9 -shape 55 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 9 -freewire 0 -freeedge 0 -sharededge 21 -max_solid 1 -max_shell 1 -max_face 9 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-07 -avg 1.000093336e-07 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj3_d1-tc-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 11 ) Warnings = 0 ( 0 ) Summary = 0 ( 11 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 2 ) Summary = 0 ( 2 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 9 ( 9 ) Summary = 55 ( 55 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 9 ( 9 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 21 ( 21 )
-TOLERANCE : MaxTol = 1.000100003e-07 ( 1.000100003e-07 ) AvgTol = 1.000093336e-07 ( 1.000093336e-07 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 1 ( 1 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 000 ( 000 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 11
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { 000 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 9 -shape 55
+checkstatshape res_1 -solid 1 -shell 1 -face 9 -freewire 0 -freeedge 0 -sharededge 21
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-07 -avg 1.000093336e-07]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 11
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 1 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { 000 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 9 -shape 55 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 9 -freewire 0 -freeedge 0 -sharededge 21 -max_solid 1 -max_shell 1 -max_face 9 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-07 -avg 1.000093336e-07 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj3_t2-db-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 16 ) Warnings = 0 ( 8 ) Summary = 0 ( 24 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 8 ( 8 ) Summary = 8 ( 8 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 2 ( 2 ) Shell = 2 ( 2 ) Face = 16 ( 16 ) Summary = 95 ( 95 )
-STATSHAPE : Solid = 2 ( 2 ) Shell = 2 ( 2 ) Face = 16 ( 16 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 34 ( 34 )
-TOLERANCE : MaxTol = 2.387546294e-05 ( 2.441868743e-05 ) AvgTol = 6.169696469e-06 ( 6.250926656e-06 )
-LABELS : N0Labels = 3 ( 3 ) N1Labels = 2 ( 2 ) N2Labels = 0 ( 0 ) TotalLabels = 5 ( 5 ) NameLabels = 5 ( 5 ) ColorLabels = 1 ( 1 ) LayerLabels = 1 ( 1 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = WHITE ( WHITE )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 0 ( { 0} )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 10 -max_faults 15
+checkdoc "tpstat c" -max_warns 8 -max_faults 0
+checkxstat D_First -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { " 0" } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 2 -shell 2 -face 16 -shape 95
+checkstatshape res_1 -solid 2 -shell 2 -face 16 -freewire 0 -freeedge 0 -sharededge 34
+set max_tol_res_1 [checkmaxtol res_1 -tol 2.441868743e-05 -avg 6.250926656e-06]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 9 -max_faults 4
+checkdoc "tpstat c" -max_warns 8 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 8 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { 0 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 2 -shell 2 -face 16 -shape 95 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 2 -shell 2 -face 16 -freewire 0 -freeedge 0 -sharededge 34 -max_solid 2 -max_shell 2 -max_face 16 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 2.387546294e-05 -avg 6.169696469e-06 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj4_d2-pe-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 27 ) Warnings = 0 ( 0 ) Summary = 0 ( 27 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 9 ( 9 ) Summary = 55 ( 55 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 9 ( 9 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 21 ( 21 )
-TOLERANCE : MaxTol = 1.000100003e-07 ( 1.000100003e-07 ) AvgTol = 1.000093336e-07 ( 1.000093336e-07 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 27
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 9 -shape 55
+checkstatshape res_1 -solid 1 -shell 1 -face 9 -freewire 0 -freeedge 0 -sharededge 21
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-07 -avg 1.000093336e-07]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 27
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 9 -shape 55 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 9 -freewire 0 -freeedge 0 -sharededge 21 -max_solid 1 -max_shell 1 -max_face 9 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-07 -avg 1.000093336e-07 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj4_d2-tc-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 38 ) Warnings = 0 ( 0 ) Summary = 0 ( 38 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 2 ) Summary = 0 ( 2 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 9 ( 9 ) Summary = 55 ( 55 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 9 ( 9 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 21 ( 21 )
-TOLERANCE : MaxTol = 1.000100003e-07 ( 1.000100003e-07 ) AvgTol = 1.000093336e-07 ( 1.000093336e-07 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 1 ( 1 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 000 ( 000 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 38
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { 000 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 9 -shape 55
+checkstatshape res_1 -solid 1 -shell 1 -face 9 -freewire 0 -freeedge 0 -sharededge 21
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-07 -avg 1.000093336e-07]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 38
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 1 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { 000 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 9 -shape 55 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 9 -freewire 0 -freeedge 0 -sharededge 21 -max_solid 1 -max_shell 1 -max_face 9 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-07 -avg 1.000093336e-07 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj4_k1_top-md-203.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 1 ( 11 ) Summary = 1 ( 11 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 38 ( 38 ) Summary = 238 ( 238 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 38 ( 38 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 96 ( 96 )
-TOLERANCE : MaxTol = 0.004142079219 ( 0.004142079219 ) AvgTol = 0.0002795801884 ( 0.0002808051902 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 11 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 1 -face 38 -shape 238
+checkstatshape res_1 -solid 0 -shell 1 -face 38 -freewire 0 -freeedge 0 -sharededge 96
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.004142079219 -avg 0.0002808051902]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 11 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 1 -face 38 -shape 238 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 1 -face 38 -freewire 0 -freeedge 0 -sharededge 96 -max_solid 0 -max_shell 1 -max_face 38 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.004142079219 -avg 0.0002795801884 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj5_d3-pe-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 27 ) Warnings = 0 ( 0 ) Summary = 0 ( 27 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 9 ( 9 ) Summary = 55 ( 55 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 9 ( 9 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 21 ( 21 )
-TOLERANCE : MaxTol = 1e-07 ( 1e-07 ) AvgTol = 1e-07 ( 1e-07 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 27
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 9 -shape 55
+checkstatshape res_1 -solid 1 -shell 1 -face 9 -freewire 0 -freeedge 0 -sharededge 21
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-07 -avg 1e-07]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 27
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 9 -shape 55 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 9 -freewire 0 -freeedge 0 -sharededge 21 -max_solid 1 -max_shell 1 -max_face 9 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1e-07 -avg 1e-07 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj5_d3-tc-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 34 ) Warnings = 0 ( 0 ) Summary = 0 ( 34 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 2 ) Summary = 0 ( 2 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 9 ( 9 ) Summary = 55 ( 55 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 9 ( 9 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 21 ( 21 )
-TOLERANCE : MaxTol = 1.000100003e-07 ( 1.000100003e-07 ) AvgTol = 1.000093336e-07 ( 1.000093336e-07 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 1 ( 1 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 000 ( 000 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 34
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { 000 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 9 -shape 55
+checkstatshape res_1 -solid 1 -shell 1 -face 9 -freewire 0 -freeedge 0 -sharededge 21
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-07 -avg 1.000093336e-07]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 34
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 1 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { 000 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 9 -shape 55 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 9 -freewire 0 -freeedge 0 -sharededge 21 -max_solid 1 -max_shell 1 -max_face 9 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-07 -avg 1.000093336e-07 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj5_k1-md-203.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 1 ( 11 ) Summary = 1 ( 11 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 38 ( 38 ) Summary = 238 ( 238 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 38 ( 38 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 96 ( 96 )
-TOLERANCE : MaxTol = 0.004142079219 ( 0.004142079219 ) AvgTol = 0.0002795801884 ( 0.0002808051902 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 11 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 1 -face 38 -shape 238
+checkstatshape res_1 -solid 0 -shell 1 -face 38 -freewire 0 -freeedge 0 -sharededge 96
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.004142079219 -avg 0.0002808051902]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 11 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 1 -face 38 -shape 238 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 1 -face 38 -freewire 0 -freeedge 0 -sharededge 96 -max_solid 0 -max_shell 1 -max_face 38 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.004142079219 -avg 0.0002795801884 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj5_k1-sh-203.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 2 ( 14 ) Summary = 2 ( 14 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 44 ( 44 ) Summary = 291 ( 291 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 44 ( 44 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 119 ( 119 )
-TOLERANCE : MaxTol = 0.0002407463375 ( 0.0002407463376 ) AvgTol = 5.378526367e-006 ( 6.563075369e-006 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 14 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 1 -face 44 -shape 291
+checkstatshape res_1 -solid 0 -shell 1 -face 44 -freewire 0 -freeedge 0 -sharededge 119
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.0002407463376 -avg 6.563075369e-006]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 14 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 1 -face 44 -shape 291 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 1 -face 44 -freewire 0 -freeedge 0 -sharededge 119 -max_solid 0 -max_shell 1 -max_face 44 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.0002407463375 -avg 5.378526367e-006 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj6_as1-ug-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 14 ) Summary = 0 ( 14 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 5 ( 5 ) Shell = 5 ( 5 ) Face = 39 ( 39 ) Summary = 269 ( 269 )
-STATSHAPE : Solid = 18 ( 18 ) Shell = 18 ( 18 ) Face = 125 ( 125 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 91 ( 91 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1e-005 ) AvgTol = 1.00006917e-007 ( 2.879948407e-006 )
-LABELS : N0Labels = 9 ( 9 ) N1Labels = 13 ( 13 ) N2Labels = 0 ( 0 ) TotalLabels = 22 ( 22 ) NameLabels = 22 ( 22 ) ColorLabels = 5 ( 5 ) LayerLabels = 5 ( 5 )
-PROPS : Centroid = 9 ( 9 ) Volume = 9 ( 9 ) Area = 9 ( 9 )
-NCOLORS : NColors = 3 ( 3 )
-COLORS : Colors = BLUE1 GREEN RED ( BLUE1 GREEN RED )
-NLAYERS : NLayers = 3 ( 3 )
-LAYERS : Layers = 1 2 3 ( 1 2 3 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 14 -max_faults 0
+checkxstat D_First -n0 9 -n1 13 -n2 0 -total 22 -withname 22 -withcolor 5 -withlayer 5 -centroid 9 -volume 9 -area 9 -colors { BLUE1 GREEN RED } -nbcolors 3 -layers { 1 2 3 } -nblayers 3
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 5 -shell 5 -face 39 -shape 269
+checkstatshape res_1 -solid 18 -shell 18 -face 125 -freewire 0 -freeedge 0 -sharededge 91
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-005 -avg 2.879948407e-006]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 14 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 9 -n1 13 -n2 0 -total 22 -withname 22 -withcolor 5 -withlayer 5 -centroid 9 -volume 9 -area 9 -nbcolors 3 -nblayers 3
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 9 -n1 13 -n2 0 -total 22 -withname 22 -withcolor 5 -withlayer 5 -centroid 9 -volume 9 -area 9 -colors { BLUE1 GREEN RED } -nbcolors 3 -layers { 1 2 3 } -nblayers 3
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 5 -shell 5 -face 39 -shape 269 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 18 -shell 18 -face 125 -freewire 0 -freeedge 0 -sharededge 91 -max_solid 18 -max_shell 18 -max_face 125 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.00006917e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj6_c1-ec-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 2 ( 2 ) Face = 7 ( 7 ) Summary = 46 ( 46 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 2 ( 2 ) Face = 7 ( 7 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 16 ( 16 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1.000100003e-007 ) AvgTol = 1.000079123e-007 ( 1.000079123e-007 )
-LABELS : N0Labels = 3 ( 3 ) N1Labels = 5 ( 5 ) N2Labels = 0 ( 0 ) TotalLabels = 8 ( 8 ) NameLabels = 5 ( 5 ) ColorLabels = 4 ( 4 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 4 ( 4 )
-COLORS : Colors = BLUE1 GREEN RED YELLOW ( BLUE1 GREEN RED YELLOW )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 3 -n1 5 -n2 0 -total 8 -withname 5 -withcolor 4 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 GREEN RED YELLOW } -nbcolors 4 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 2 -face 7 -shape 46
+checkstatshape res_1 -solid 1 -shell 2 -face 7 -freewire 0 -freeedge 0 -sharededge 16
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-007 -avg 1.000079123e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3 -n1 5 -n2 0 -total 8 -withname 5 -withcolor 4 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 4 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 5 -n2 0 -total 8 -withname 5 -withcolor 4 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 GREEN RED YELLOW } -nbcolors 4 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 2 -face 7 -shape 46 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 2 -face 7 -freewire 0 -freeedge 0 -sharededge 16 -max_solid 1 -max_shell 2 -max_face 7 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.000079123e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj6_c1-hc-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 6 ( 6 ) Summary = 35 ( 35 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 6 ( 6 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 12 ( 12 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1.000100003e-007 ) AvgTol = 1.00009231e-007 ( 1.00009231e-007 )
-LABELS : N0Labels = 2 ( 2 ) N1Labels = 7 ( 7 ) N2Labels = 0 ( 0 ) TotalLabels = 9 ( 9 ) NameLabels = 3 ( 3 ) ColorLabels = 6 ( 6 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 1 ( 1 ) Volume = 1 ( 1 ) Area = 1 ( 1 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = RED YELLOW ( RED YELLOW )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 2 -n1 7 -n2 0 -total 9 -withname 3 -withcolor 6 -withlayer 0 -centroid 1 -volume 1 -area 1 -colors { RED YELLOW } -nbcolors 2 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 6 -shape 35
+checkstatshape res_1 -solid 1 -shell 1 -face 6 -freewire 0 -freeedge 0 -sharededge 12
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-007 -avg 1.00009231e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 2 -n1 7 -n2 0 -total 9 -withname 3 -withcolor 6 -withlayer 0 -centroid 1 -volume 1 -area 1 -nbcolors 2 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 2 -n1 7 -n2 0 -total 9 -withname 3 -withcolor 6 -withlayer 0 -centroid 1 -volume 1 -area 1 -colors { RED YELLOW } -nbcolors 2 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 6 -shape 35 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 6 -freewire 0 -freeedge 0 -sharededge 12 -max_solid 1 -max_shell 1 -max_face 6 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.00009231e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj6_c1-pe-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 19 ) Warnings = 0 ( 0 ) Summary = 0 ( 19 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 4 ) Summary = 0 ( 4 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 2 ( 2 ) Face = 7 ( 7 ) Summary = 68 ( 65 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 2 ( 2 ) Face = 7 ( 7 ) FreeWire = 0 ( 3 ) FreeEdge = 6 ( 6 ) SharedEdge = 22 ( 22 )
-TOLERANCE : MaxTol = 1.000100003e-07 ( 1.001604854e-07 ) AvgTol = 1.000071561e-07 ( 1.00013885e-07 )
-LABELS : N0Labels = 4 ( 4 ) N1Labels = 8 ( 8 ) N2Labels = 0 ( 0 ) TotalLabels = 12 ( 12 ) NameLabels = 7 ( 7 ) ColorLabels = 7 ( 7 ) LayerLabels = 3 ( 3 )
-PROPS : Centroid = 1 ( 1 ) Volume = 1 ( 1 ) Area = 2 ( 2 )
-NCOLORS : NColors = 4 ( 4 )
-COLORS : Colors = DODGERBLUE2 RED WHITE YELLOW ( DODGERBLUE2 RED WHITE YELLOW )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 03___PRT_ALL_CURVES ( 03___PRT_ALL_CURVES )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 19
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+checkxstat D_First -n0 4 -n1 8 -n2 0 -total 12 -withname 7 -withcolor 7 -withlayer 3 -centroid 1 -volume 1 -area 2 -colors { DODGERBLUE2 RED WHITE YELLOW } -nbcolors 4 -layers { "03___PRT_ALL_CURVES" } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 2 -face 7 -shape 65
+checkstatshape res_1 -solid 1 -shell 2 -face 7 -freewire 3 -freeedge 6 -sharededge 22
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.001604854e-07 -avg 1.00013885e-07]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 19
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 4 -n1 8 -n2 0 -total 12 -withname 7 -withcolor 7 -withlayer 3 -centroid 1 -volume 1 -area 2 -nbcolors 4 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 4 -n1 8 -n2 0 -total 12 -withname 7 -withcolor 7 -withlayer 3 -centroid 1 -volume 1 -area 2 -colors { DODGERBLUE2 RED WHITE YELLOW } -nbcolors 4 -layers { "03___PRT_ALL_CURVES" } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 2 -face 7 -shape 68 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 2 -face 7 -freewire 0 -freeedge 6 -sharededge 22 -max_solid 1 -max_shell 2 -max_face 7 -max_freewire 3 -max_freeedge 6
+checkmaxtol res_2 -tol 1.000100003e-07 -avg 1.000071561e-07 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj6_c1-sd-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 18 ) Warnings = 0 ( 0 ) Summary = 0 ( 18 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 2 ( 2 ) Face = 7 ( 7 ) Summary = 51 ( 51 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 2 ( 2 ) Face = 7 ( 7 ) FreeWire = 0 ( 0 ) FreeEdge = 1 ( 1 ) SharedEdge = 17 ( 17 )
-TOLERANCE : MaxTol = 1.000100003e-07 ( 1.000100003e-07 ) AvgTol = 1.000082981e-07 ( 1.000082981e-07 )
-LABELS : N0Labels = 5 ( 5 ) N1Labels = 4 ( 4 ) N2Labels = 0 ( 0 ) TotalLabels = 9 ( 9 ) NameLabels = 7 ( 7 ) ColorLabels = 5 ( 5 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 4 ( 4 )
-COLORS : Colors = BLUE1 MATRAGRAY MEDIUMTURQUOISE RED ( BLUE1 MATRAGRAY MEDIUMTURQUOISE RED )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 18
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 5 -n1 4 -n2 0 -total 9 -withname 7 -withcolor 5 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 MATRAGRAY MEDIUMTURQUOISE RED } -nbcolors 4 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 2 -face 7 -shape 51
+checkstatshape res_1 -solid 1 -shell 2 -face 7 -freewire 0 -freeedge 1 -sharededge 17
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-07 -avg 1.000082981e-07]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 18
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 5 -n1 4 -n2 0 -total 9 -withname 7 -withcolor 5 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 4 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 5 -n1 4 -n2 0 -total 9 -withname 7 -withcolor 5 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 MATRAGRAY MEDIUMTURQUOISE RED } -nbcolors 4 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 2 -face 7 -shape 51 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 2 -face 7 -freewire 0 -freeedge 1 -sharededge 17 -max_solid 1 -max_shell 2 -max_face 7 -max_freewire 0 -max_freeedge 1
+checkmaxtol res_2 -tol 1.000100003e-07 -avg 1.000082981e-07 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj6_c1-tc-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 2 ( 2 ) Face = 7 ( 7 ) Summary = 50 ( 50 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 2 ( 2 ) Face = 7 ( 7 ) FreeWire = 0 ( 0 ) FreeEdge = 1 ( 1 ) SharedEdge = 17 ( 17 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1.000100003e-007 ) AvgTol = 1.000082981e-007 ( 1.000082981e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 9 ( 9 ) N2Labels = 0 ( 0 ) TotalLabels = 10 ( 10 ) NameLabels = 1 ( 1 ) ColorLabels = 9 ( 9 ) LayerLabels = 2 ( 2 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 5 ( 5 )
-COLORS : Colors = BLUE1 CYAN1 GREEN RED YELLOW ( BLUE1 CYAN1 GREEN RED YELLOW )
-NLAYERS : NLayers = 2 ( 2 )
-LAYERS : Layers = 001 002 ( 001 002 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 9 -n2 0 -total 10 -withname 1 -withcolor 9 -withlayer 2 -centroid 0 -volume 0 -area 0 -colors { BLUE1 CYAN1 GREEN RED YELLOW } -nbcolors 5 -layers { 001 002 } -nblayers 2
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 2 -face 7 -shape 50
+checkstatshape res_1 -solid 1 -shell 2 -face 7 -freewire 0 -freeedge 1 -sharededge 17
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-007 -avg 1.000082981e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 9 -n2 0 -total 10 -withname 1 -withcolor 9 -withlayer 2 -centroid 0 -volume 0 -area 0 -nbcolors 5 -nblayers 2
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 9 -n2 0 -total 10 -withname 1 -withcolor 9 -withlayer 2 -centroid 0 -volume 0 -area 0 -colors { BLUE1 CYAN1 GREEN RED YELLOW } -nbcolors 5 -layers { 001 002 } -nblayers 2
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 2 -face 7 -shape 50 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 2 -face 7 -freewire 0 -freeedge 1 -sharededge 17 -max_solid 1 -max_shell 2 -max_face 7 -max_freewire 0 -max_freeedge 1
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.000082981e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj6_c1-tu-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 2 ( 2 ) Face = 7 ( 7 ) Summary = 50 ( 50 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 2 ( 2 ) Face = 7 ( 7 ) FreeWire = 0 ( 0 ) FreeEdge = 1 ( 1 ) SharedEdge = 17 ( 17 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1.000100003e-007 ) AvgTol = 1.000082981e-007 ( 1.000082981e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 4 ( 4 ) N2Labels = 0 ( 0 ) TotalLabels = 5 ( 5 ) NameLabels = 1 ( 1 ) ColorLabels = 4 ( 4 ) LayerLabels = 2 ( 2 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 4 ( 4 )
-COLORS : Colors = BLUE1 CYAN1 RED YELLOW ( BLUE1 CYAN1 RED YELLOW )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 010 ( 010 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 4 -n2 0 -total 5 -withname 1 -withcolor 4 -withlayer 2 -centroid 0 -volume 0 -area 0 -colors { BLUE1 CYAN1 RED YELLOW } -nbcolors 4 -layers { 010 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 2 -face 7 -shape 50
+checkstatshape res_1 -solid 1 -shell 2 -face 7 -freewire 0 -freeedge 1 -sharededge 17
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-007 -avg 1.000082981e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 4 -n2 0 -total 5 -withname 1 -withcolor 4 -withlayer 2 -centroid 0 -volume 0 -area 0 -nbcolors 4 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 4 -n2 0 -total 5 -withname 1 -withcolor 4 -withlayer 2 -centroid 0 -volume 0 -area 0 -colors { BLUE1 CYAN1 RED YELLOW } -nbcolors 4 -layers { 010 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 2 -face 7 -shape 50 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 2 -face 7 -freewire 0 -freeedge 1 -sharededge 17 -max_solid 1 -max_shell 2 -max_face 7 -max_freewire 0 -max_freeedge 1
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.000082981e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj6_c1-ug-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 2 ( 2 ) Face = 7 ( 7 ) Summary = 50 ( 50 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 2 ( 2 ) Face = 7 ( 7 ) FreeWire = 0 ( 0 ) FreeEdge = 1 ( 1 ) SharedEdge = 17 ( 17 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1.000100003e-007 ) AvgTol = 1.000082981e-007 ( 1.000082981e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 4 ( 4 ) N2Labels = 0 ( 0 ) TotalLabels = 5 ( 5 ) NameLabels = 1 ( 1 ) ColorLabels = 4 ( 4 ) LayerLabels = 3 ( 3 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 4 ( 4 )
-COLORS : Colors = BLUE1 RED SALMON1 YELLOW ( BLUE1 RED SALMON1 YELLOW )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 1 ( 1 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 4 -n2 0 -total 5 -withname 1 -withcolor 4 -withlayer 3 -centroid 0 -volume 0 -area 0 -colors { BLUE1 RED SALMON1 YELLOW } -nbcolors 4 -layers { 1 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 2 -face 7 -shape 50
+checkstatshape res_1 -solid 1 -shell 2 -face 7 -freewire 0 -freeedge 1 -sharededge 17
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-007 -avg 1.000082981e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 4 -n2 0 -total 5 -withname 1 -withcolor 4 -withlayer 3 -centroid 0 -volume 0 -area 0 -nbcolors 4 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 4 -n2 0 -total 5 -withname 1 -withcolor 4 -withlayer 3 -centroid 0 -volume 0 -area 0 -colors { BLUE1 RED SALMON1 YELLOW } -nbcolors 4 -layers { 1 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 2 -face 7 -shape 50 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 2 -face 7 -freewire 0 -freeedge 1 -sharededge 17 -max_solid 1 -max_shell 2 -max_face 7 -max_freewire 0 -max_freeedge 1
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.000082981e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj6_d3-pe-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 30 ) Warnings = 0 ( 0 ) Summary = 0 ( 30 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 9 ( 9 ) Summary = 55 ( 55 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 9 ( 9 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 21 ( 21 )
-TOLERANCE : MaxTol = 1.000100003e-07 ( 1.000100003e-07 ) AvgTol = 1.000093336e-07 ( 1.000093336e-07 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 30
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 9 -shape 55
+checkstatshape res_1 -solid 1 -shell 1 -face 9 -freewire 0 -freeedge 0 -sharededge 21
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-07 -avg 1.000093336e-07]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 30
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 9 -shape 55 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 9 -freewire 0 -freeedge 0 -sharededge 21 -max_solid 1 -max_shell 1 -max_face 9 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-07 -avg 1.000093336e-07 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj6_k1-md-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 1 ( 11 ) Summary = 1 ( 11 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 38 ( 38 ) Summary = 238 ( 238 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 38 ( 38 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 96 ( 96 )
-TOLERANCE : MaxTol = 0.01052088122 ( 0.01052088122 ) AvgTol = 0.0007091327396 ( 0.0007106710321 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 1 ( 1 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = GRAY94 ( GRAY94 )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 5 ( 5 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 11 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { GRAY94 } -nbcolors 1 -layers { 5 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 1 -face 38 -shape 238
+checkstatshape res_1 -solid 0 -shell 1 -face 38 -freewire 0 -freeedge 0 -sharededge 96
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.01052088122 -avg 0.0007106710321]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 11 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { GRAY94 } -nbcolors 1 -layers { 5 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 1 -face 38 -shape 238 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 1 -face 38 -freewire 0 -freeedge 0 -sharededge 96 -max_solid 0 -max_shell 1 -max_face 38 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.01052088122 -avg 0.0007091327396 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj6_pm4-ug2-203.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 17 ) Summary = 0 ( 17 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 35 ( 35 ) Summary = 220 ( 220 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 35 ( 35 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 83 ( 83 )
-TOLERANCE : MaxTol = 0.007686697769 ( 0.007686697645 ) AvgTol = 0.0007248364585 ( 0.0007291554284 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 17 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 35 -shape 220
+checkstatshape res_1 -solid 1 -shell 1 -face 35 -freewire 0 -freeedge 0 -sharededge 83
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.007686697645 -avg 0.0007291554284]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 17 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 35 -shape 220 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 35 -freewire 0 -freeedge 0 -sharededge 83 -max_solid 1 -max_shell 1 -max_face 35 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.007686697769 -avg 0.0007248364585 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj7_c1-hc-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 6 ( 6 ) Summary = 35 ( 35 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 6 ( 6 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 12 ( 12 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1.000100003e-007 ) AvgTol = 1.00009231e-007 ( 1.00009231e-007 )
-LABELS : N0Labels = 2 ( 2 ) N1Labels = 7 ( 7 ) N2Labels = 0 ( 0 ) TotalLabels = 9 ( 9 ) NameLabels = 3 ( 3 ) ColorLabels = 7 ( 7 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 2 ( 2 ) Volume = 2 ( 2 ) Area = 2 ( 2 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = RED YELLOW ( RED YELLOW )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 2 -n1 7 -n2 0 -total 9 -withname 3 -withcolor 7 -withlayer 0 -centroid 2 -volume 2 -area 2 -colors { RED YELLOW } -nbcolors 2 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 6 -shape 35
+checkstatshape res_1 -solid 1 -shell 1 -face 6 -freewire 0 -freeedge 0 -sharededge 12
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-007 -avg 1.00009231e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 2 -n1 7 -n2 0 -total 9 -withname 3 -withcolor 7 -withlayer 0 -centroid 2 -volume 2 -area 2 -nbcolors 2 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 2 -n1 7 -n2 0 -total 9 -withname 3 -withcolor 7 -withlayer 0 -centroid 2 -volume 2 -area 2 -colors { RED YELLOW } -nbcolors 2 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 6 -shape 35 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 6 -freewire 0 -freeedge 0 -sharededge 12 -max_solid 1 -max_shell 1 -max_face 6 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.00009231e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj7_c2-ec-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 1 ( 1 ) Summary = 16 ( 16 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 1 ( 1 ) FreeWire = 0 ( 0 ) FreeEdge = 1 ( 1 ) SharedEdge = 5 ( 5 )
-TOLERANCE : MaxTol = 1e-007 ( 1e-007 ) AvgTol = 1e-007 ( 1e-007 )
-LABELS : N0Labels = 3 ( 3 ) N1Labels = 3 ( 3 ) N2Labels = 0 ( 0 ) TotalLabels = 6 ( 6 ) NameLabels = 5 ( 5 ) ColorLabels = 2 ( 2 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = BLUE1 RED ( BLUE1 RED )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 3 -n1 3 -n2 0 -total 6 -withname 5 -withcolor 2 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 RED } -nbcolors 2 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 1 -face 1 -shape 16
+checkstatshape res_1 -solid 0 -shell 1 -face 1 -freewire 0 -freeedge 1 -sharededge 5
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-007 -avg 1e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3 -n1 3 -n2 0 -total 6 -withname 5 -withcolor 2 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 2 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 3 -n2 0 -total 6 -withname 5 -withcolor 2 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 RED } -nbcolors 2 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 1 -face 1 -shape 16 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 1 -face 1 -freewire 0 -freeedge 1 -sharededge 5 -max_solid 0 -max_shell 1 -max_face 1 -max_freewire 0 -max_freeedge 1
+checkmaxtol res_2 -tol 1e-007 -avg 1e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj7_c2-sd-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 18 ) Warnings = 0 ( 0 ) Summary = 0 ( 18 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 1 ( 1 ) Summary = 17 ( 17 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 1 ( 1 ) FreeWire = 0 ( 0 ) FreeEdge = 1 ( 1 ) SharedEdge = 5 ( 5 )
-TOLERANCE : MaxTol = 1.00005e-07 ( 1.00005e-07 ) AvgTol = 1.0000375e-07 ( 1.0000375e-07 )
-LABELS : N0Labels = 4 ( 4 ) N1Labels = 3 ( 3 ) N2Labels = 0 ( 0 ) TotalLabels = 7 ( 7 ) NameLabels = 6 ( 6 ) ColorLabels = 3 ( 3 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 3 ( 3 )
-COLORS : Colors = BLUE1 CYAN1 MEDIUMTURQUOISE ( BLUE1 CYAN1 MEDIUMTURQUOISE )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 18
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 4 -n1 3 -n2 0 -total 7 -withname 6 -withcolor 3 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 CYAN1 MEDIUMTURQUOISE } -nbcolors 3 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 1 -face 1 -shape 17
+checkstatshape res_1 -solid 0 -shell 1 -face 1 -freewire 0 -freeedge 1 -sharededge 5
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.00005e-07 -avg 1.0000375e-07]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 18
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 4 -n1 3 -n2 0 -total 7 -withname 6 -withcolor 3 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 3 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 4 -n1 3 -n2 0 -total 7 -withname 6 -withcolor 3 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 CYAN1 MEDIUMTURQUOISE } -nbcolors 3 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 1 -face 1 -shape 17 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 1 -face 1 -freewire 0 -freeedge 1 -sharededge 5 -max_solid 0 -max_shell 1 -max_face 1 -max_freewire 0 -max_freeedge 1
+checkmaxtol res_2 -tol 1.00005e-07 -avg 1.0000375e-07 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj7_c2-tu-203.stp
-set ref_data {
-DATA : Faulties = 0 ( 8 ) Warnings = 0 ( 0 ) Summary = 0 ( 8 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 2 ) Summary = 0 ( 2 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 1 ( 1 ) Summary = 21 ( 19 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 1 ( 1 ) FreeWire = 0 ( 0 ) FreeEdge = 2 ( 2 ) SharedEdge = 6 ( 6 )
-TOLERANCE : MaxTol = 1e-07 ( 1e-07 ) AvgTol = 1e-07 ( 1e-07 )
-LABELS : N0Labels = 3 ( 3 ) N1Labels = 4 ( 4 ) N2Labels = 0 ( 0 ) TotalLabels = 7 ( 7 ) NameLabels = 5 ( 5 ) ColorLabels = 3 ( 3 ) LayerLabels = 1 ( 1 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 3 ( 3 )
-COLORS : Colors = DARKSLATEGRAY2 GREEN ROYALBLUE3 ( DARKSLATEGRAY2 GREEN ROYALBLUE3 )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 001 ( 001 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 8
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+checkxstat D_First -n0 3 -n1 4 -n2 0 -total 7 -withname 5 -withcolor 3 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { DARKSLATEGRAY2 GREEN ROYALBLUE3 } -nbcolors 3 -layers { 001 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 1 -face 1 -shape 19
+checkstatshape res_1 -solid 0 -shell 1 -face 1 -freewire 0 -freeedge 2 -sharededge 6
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-07 -avg 1e-07]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 8
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3 -n1 4 -n2 0 -total 7 -withname 5 -withcolor 3 -withlayer 1 -centroid 0 -volume 0 -area 0 -nbcolors 3 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 4 -n2 0 -total 7 -withname 5 -withcolor 3 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { DARKSLATEGRAY2 GREEN ROYALBLUE3 } -nbcolors 3 -layers { 001 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 1 -face 1 -shape 21 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 1 -face 1 -freewire 0 -freeedge 2 -sharededge 6 -max_solid 0 -max_shell 1 -max_face 1 -max_freewire 0 -max_freeedge 2
+checkmaxtol res_2 -tol 1e-07 -avg 1e-07 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj7_c2-ug-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 1 ( 1 ) Summary = 16 ( 16 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 1 ( 1 ) FreeWire = 0 ( 0 ) FreeEdge = 1 ( 1 ) SharedEdge = 5 ( 5 )
-TOLERANCE : MaxTol = 1.00005e-007 ( 1.00005e-007 ) AvgTol = 1.0000375e-007 ( 1.0000375e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 2 ( 2 ) N2Labels = 0 ( 0 ) TotalLabels = 3 ( 3 ) NameLabels = 1 ( 1 ) ColorLabels = 2 ( 2 ) LayerLabels = 2 ( 2 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = BLUE1 SALMON1 ( BLUE1 SALMON1 )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 1 ( 1 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 2 -n2 0 -total 3 -withname 1 -withcolor 2 -withlayer 2 -centroid 0 -volume 0 -area 0 -colors { BLUE1 SALMON1 } -nbcolors 2 -layers { 1 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 1 -face 1 -shape 16
+checkstatshape res_1 -solid 0 -shell 1 -face 1 -freewire 0 -freeedge 1 -sharededge 5
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.00005e-007 -avg 1.0000375e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 2 -n2 0 -total 3 -withname 1 -withcolor 2 -withlayer 2 -centroid 0 -volume 0 -area 0 -nbcolors 2 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 2 -n2 0 -total 3 -withname 1 -withcolor 2 -withlayer 2 -centroid 0 -volume 0 -area 0 -colors { BLUE1 SALMON1 } -nbcolors 2 -layers { 1 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 1 -face 1 -shape 16 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 1 -face 1 -freewire 0 -freeedge 1 -sharededge 5 -max_solid 0 -max_shell 1 -max_face 1 -max_freewire 0 -max_freeedge 1
+checkmaxtol res_2 -tol 1.00005e-007 -avg 1.0000375e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj8_c2-ct-203.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 1 ( 1 ) Summary = 16 ( 16 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 1 ( 1 ) FreeWire = 0 ( 0 ) FreeEdge = 1 ( 1 ) SharedEdge = 5 ( 5 )
-TOLERANCE : MaxTol = 1.00005e-007 ( 1.00005e-007 ) AvgTol = 1.0000375e-007 ( 1.0000375e-007 )
-LABELS : N0Labels = 3 ( 3 ) N1Labels = 2 ( 2 ) N2Labels = 0 ( 0 ) TotalLabels = 5 ( 5 ) NameLabels = 5 ( 5 ) ColorLabels = 2 ( 2 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = BLUE1 MAGENTA1 ( BLUE1 MAGENTA1 )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 2 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 MAGENTA1 } -nbcolors 2 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 1 -face 1 -shape 16
+checkstatshape res_1 -solid 0 -shell 1 -face 1 -freewire 0 -freeedge 1 -sharededge 5
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.00005e-007 -avg 1.0000375e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 2 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 2 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 2 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 MAGENTA1 } -nbcolors 2 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 1 -face 1 -shape 16 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 1 -face 1 -freewire 0 -freeedge 1 -sharededge 5 -max_solid 0 -max_shell 1 -max_face 1 -max_freewire 0 -max_freeedge 1
+checkmaxtol res_2 -tol 1.00005e-007 -avg 1.0000375e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj8_c2-db-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 1 ( 1 ) Summary = 16 ( 16 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 1 ( 1 ) FreeWire = 0 ( 0 ) FreeEdge = 1 ( 1 ) SharedEdge = 5 ( 5 )
-TOLERANCE : MaxTol = 0.001285959159 ( 0.00128595916 ) AvgTol = 0.0007707941989 ( 0.000770794199 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 2 ( 2 ) N2Labels = 0 ( 0 ) TotalLabels = 3 ( 3 ) NameLabels = 1 ( 1 ) ColorLabels = 2 ( 2 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = DEEPPINK2 DODGERBLUE2 ( DEEPPINK2 DODGERBLUE2 )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 2 -n2 0 -total 3 -withname 1 -withcolor 2 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { DEEPPINK2 DODGERBLUE2 } -nbcolors 2 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 1 -face 1 -shape 16
+checkstatshape res_1 -solid 0 -shell 1 -face 1 -freewire 0 -freeedge 1 -sharededge 5
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.00128595916 -avg 0.000770794199]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 2 -n2 0 -total 3 -withname 1 -withcolor 2 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 2 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 2 -n2 0 -total 3 -withname 1 -withcolor 2 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { DEEPPINK2 DODGERBLUE2 } -nbcolors 2 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 1 -face 1 -shape 16 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 1 -face 1 -freewire 0 -freeedge 1 -sharededge 5 -max_solid 0 -max_shell 1 -max_face 1 -max_freewire 0 -max_freeedge 1
+checkmaxtol res_2 -tol 0.001285959159 -avg 0.0007707941989 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj8_c2-ec-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 1 ( 1 ) Summary = 16 ( 16 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 1 ( 1 ) FreeWire = 0 ( 0 ) FreeEdge = 1 ( 1 ) SharedEdge = 5 ( 5 )
-TOLERANCE : MaxTol = 1e-007 ( 1e-007 ) AvgTol = 1e-007 ( 1e-007 )
-LABELS : N0Labels = 3 ( 3 ) N1Labels = 2 ( 2 ) N2Labels = 0 ( 0 ) TotalLabels = 5 ( 5 ) NameLabels = 5 ( 5 ) ColorLabels = 2 ( 2 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = BLUE1 RED ( BLUE1 RED )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 2 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 RED } -nbcolors 2 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 1 -face 1 -shape 16
+checkstatshape res_1 -solid 0 -shell 1 -face 1 -freewire 0 -freeedge 1 -sharededge 5
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-007 -avg 1e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 2 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 2 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 2 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 RED } -nbcolors 2 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 1 -face 1 -shape 16 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 1 -face 1 -freewire 0 -freeedge 1 -sharededge 5 -max_solid 0 -max_shell 1 -max_face 1 -max_freewire 0 -max_freeedge 1
+checkmaxtol res_2 -tol 1e-007 -avg 1e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj8_c2-hc-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 1 ( 1 ) Summary = 12 ( 12 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 1 ( 1 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 4 ( 4 )
-TOLERANCE : MaxTol = 1.00005e-007 ( 1.00005e-007 ) AvgTol = 1.000046154e-007 ( 1.000046154e-007 )
-LABELS : N0Labels = 2 ( 2 ) N1Labels = 1 ( 1 ) N2Labels = 0 ( 0 ) TotalLabels = 3 ( 3 ) NameLabels = 3 ( 3 ) ColorLabels = 1 ( 1 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 1 ( 1 ) Volume = 1 ( 1 ) Area = 1 ( 1 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = BLUE1 ( BLUE1 )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 2 -n1 1 -n2 0 -total 3 -withname 3 -withcolor 1 -withlayer 0 -centroid 1 -volume 1 -area 1 -colors { BLUE1 } -nbcolors 1 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 1 -face 1 -shape 12
+checkstatshape res_1 -solid 0 -shell 1 -face 1 -freewire 0 -freeedge 0 -sharededge 4
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.00005e-007 -avg 1.000046154e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 2 -n1 1 -n2 0 -total 3 -withname 3 -withcolor 1 -withlayer 0 -centroid 1 -volume 1 -area 1 -nbcolors 1 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 2 -n1 1 -n2 0 -total 3 -withname 3 -withcolor 1 -withlayer 0 -centroid 1 -volume 1 -area 1 -colors { BLUE1 } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 1 -face 1 -shape 12 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 1 -face 1 -freewire 0 -freeedge 0 -sharededge 4 -max_solid 0 -max_shell 1 -max_face 1 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.00005e-007 -avg 1.000046154e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj8_c2-id-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 7 ) Warnings = 0 ( 0 ) Summary = 0 ( 7 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 1 ( 1 ) Summary = 16 ( 16 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 1 ( 1 ) FreeWire = 0 ( 0 ) FreeEdge = 1 ( 1 ) SharedEdge = 5 ( 5 )
-TOLERANCE : MaxTol = 1e-07 ( 1e-07 ) AvgTol = 1e-07 ( 1e-07 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 2 ( 2 ) N2Labels = 0 ( 0 ) TotalLabels = 3 ( 3 ) NameLabels = 1 ( 1 ) ColorLabels = 2 ( 2 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = BLUE1 MAGENTA1 ( BLUE1 MAGENTA1 )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 7
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 2 -n2 0 -total 3 -withname 1 -withcolor 2 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 MAGENTA1 } -nbcolors 2 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 1 -face 1 -shape 16
+checkstatshape res_1 -solid 0 -shell 1 -face 1 -freewire 0 -freeedge 1 -sharededge 5
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-07 -avg 1e-07]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 7
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 2 -n2 0 -total 3 -withname 1 -withcolor 2 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 2 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 2 -n2 0 -total 3 -withname 1 -withcolor 2 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 MAGENTA1 } -nbcolors 2 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 1 -face 1 -shape 16 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 1 -face 1 -freewire 0 -freeedge 1 -sharededge 5 -max_solid 0 -max_shell 1 -max_face 1 -max_freewire 0 -max_freeedge 1
+checkmaxtol res_2 -tol 1e-07 -avg 1e-07 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj8_c2-pe-203.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 1 ( 1 ) Summary = 11 ( 11 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 1 ( 1 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 4 ( 4 )
-TOLERANCE : MaxTol = 1.00005e-007 ( 1.00005e-007 ) AvgTol = 1.000046154e-007 ( 1.000046154e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 1 ( 1 ) N2Labels = 0 ( 0 ) TotalLabels = 2 ( 2 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 1 ( 1 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 1 ( 1 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = BLUE1 ( BLUE1 )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 06___PRT_ALL_SURFS ( 06___PRT_ALL_SURFS )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 1 -n2 0 -total 2 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 1 -colors { BLUE1 } -nbcolors 1 -layers { "06___PRT_ALL_SURFS" } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 1 -face 1 -shape 11
+checkstatshape res_1 -solid 0 -shell 1 -face 1 -freewire 0 -freeedge 0 -sharededge 4
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.00005e-007 -avg 1.000046154e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 1 -n2 0 -total 2 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 1 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 1 -n2 0 -total 2 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 1 -colors { BLUE1 } -nbcolors 1 -layers { "06___PRT_ALL_SURFS" } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 1 -face 1 -shape 11 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 1 -face 1 -freewire 0 -freeedge 0 -sharededge 4 -max_solid 0 -max_shell 1 -max_face 1 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.00005e-007 -avg 1.000046154e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj8_c2-tu-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 7 ) Warnings = 0 ( 0 ) Summary = 0 ( 7 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 1 ) Summary = 0 ( 1 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 1 ( 1 ) Summary = 28 ( 28 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 1 ( 1 ) FreeWire = 0 ( 0 ) FreeEdge = 1 ( 1 ) SharedEdge = 11 ( 11 )
-TOLERANCE : MaxTol = 1.00005e-07 ( 1.00005e-07 ) AvgTol = 1.000044118e-07 ( 1.000044118e-07 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 2 ( 2 ) N2Labels = 0 ( 0 ) TotalLabels = 3 ( 3 ) NameLabels = 1 ( 1 ) ColorLabels = 2 ( 2 ) LayerLabels = 1 ( 1 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = DARKORANGE1 INDIANRED1 ( DARKORANGE1 INDIANRED1 )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 001 ( 001 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 7
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+checkxstat D_First -n0 1 -n1 2 -n2 0 -total 3 -withname 1 -withcolor 2 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { DARKORANGE1 INDIANRED1 } -nbcolors 2 -layers { 001 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 1 -face 1 -shape 28
+checkstatshape res_1 -solid 0 -shell 1 -face 1 -freewire 0 -freeedge 1 -sharededge 11
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.00005e-07 -avg 1.000044118e-07]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 7
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 2 -n2 0 -total 3 -withname 1 -withcolor 2 -withlayer 1 -centroid 0 -volume 0 -area 0 -nbcolors 2 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 2 -n2 0 -total 3 -withname 1 -withcolor 2 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { DARKORANGE1 INDIANRED1 } -nbcolors 2 -layers { 001 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 1 -face 1 -shape 28 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 1 -face 1 -freewire 0 -freeedge 1 -sharededge 11 -max_solid 0 -max_shell 1 -max_face 1 -max_freewire 0 -max_freeedge 1
+checkmaxtol res_2 -tol 1.00005e-07 -avg 1.000044118e-07 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj9_c2-oc-203.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 1 ( 1 ) Summary = 16 ( 16 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 1 ( 1 ) FreeWire = 0 ( 0 ) FreeEdge = 1 ( 1 ) SharedEdge = 5 ( 5 )
-TOLERANCE : MaxTol = 1e-007 ( 1e-007 ) AvgTol = 1e-007 ( 1e-007 )
-LABELS : N0Labels = 3 ( 3 ) N1Labels = 2 ( 2 ) N2Labels = 0 ( 0 ) TotalLabels = 5 ( 5 ) NameLabels = 5 ( 5 ) ColorLabels = 2 ( 2 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = BLUE1 MAGENTA1 ( BLUE1 MAGENTA1 )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 2 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 MAGENTA1 } -nbcolors 2 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 1 -face 1 -shape 16
+checkstatshape res_1 -solid 0 -shell 1 -face 1 -freewire 0 -freeedge 1 -sharededge 5
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-007 -avg 1e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 2 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 2 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 2 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 MAGENTA1 } -nbcolors 2 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 1 -face 1 -shape 16 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 1 -face 1 -freewire 0 -freeedge 1 -sharededge 5 -max_solid 0 -max_shell 1 -max_face 1 -max_freewire 0 -max_freeedge 1
+checkmaxtol res_2 -tol 1e-007 -avg 1e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj9_c2-oc-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 1 ( 1 ) Summary = 16 ( 16 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 1 ( 1 ) FreeWire = 0 ( 0 ) FreeEdge = 1 ( 1 ) SharedEdge = 5 ( 5 )
-TOLERANCE : MaxTol = 1e-007 ( 1e-007 ) AvgTol = 1e-007 ( 1e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 2 ( 2 ) N2Labels = 0 ( 0 ) TotalLabels = 3 ( 3 ) NameLabels = 1 ( 1 ) ColorLabels = 2 ( 2 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = BLUE1 MAGENTA1 ( BLUE1 MAGENTA1 )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 2 -n2 0 -total 3 -withname 1 -withcolor 2 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 MAGENTA1 } -nbcolors 2 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 1 -face 1 -shape 16
+checkstatshape res_1 -solid 0 -shell 1 -face 1 -freewire 0 -freeedge 1 -sharededge 5
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-007 -avg 1e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 2 -n2 0 -total 3 -withname 1 -withcolor 2 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 2 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 2 -n2 0 -total 3 -withname 1 -withcolor 2 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 MAGENTA1 } -nbcolors 2 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 1 -face 1 -shape 16 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 1 -face 1 -freewire 0 -freeedge 1 -sharededge 5 -max_solid 0 -max_shell 1 -max_face 1 -max_freewire 0 -max_freeedge 1
+checkmaxtol res_2 -tol 1e-007 -avg 1e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj9_io1-id-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 12 ( 12 ) Summary = 12 ( 12 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 17 ( 17 ) Summary = 111 ( 111 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 17 ( 17 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 35 ( 35 )
-TOLERANCE : MaxTol = 1e-007 ( 1e-007 ) AvgTol = 1e-007 ( 1e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 16 ( 16 ) N2Labels = 0 ( 0 ) TotalLabels = 17 ( 17 ) NameLabels = 1 ( 1 ) ColorLabels = 17 ( 17 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 1 ( 1 ) Volume = 1 ( 1 ) Area = 1 ( 1 )
-NCOLORS : NColors = 3 ( 3 )
-COLORS : Colors = BLUE1 RED YELLOW ( BLUE1 RED YELLOW )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 12 -max_faults 0
+checkxstat D_First -n0 1 -n1 16 -n2 0 -total 17 -withname 1 -withcolor 17 -withlayer 0 -centroid 1 -volume 1 -area 1 -colors { BLUE1 RED YELLOW } -nbcolors 3 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 17 -shape 111
+checkstatshape res_1 -solid 1 -shell 1 -face 17 -freewire 0 -freeedge 0 -sharededge 35
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-007 -avg 1e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 12 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 12 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 16 -n2 0 -total 17 -withname 1 -withcolor 17 -withlayer 0 -centroid 1 -volume 1 -area 1 -nbcolors 3 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 16 -n2 0 -total 17 -withname 1 -withcolor 17 -withlayer 0 -centroid 1 -volume 1 -area 1 -colors { BLUE1 RED YELLOW } -nbcolors 3 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 17 -shape 111 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 17 -freewire 0 -freeedge 0 -sharededge 35 -max_solid 1 -max_shell 1 -max_face 17 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1e-007 -avg 1e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj9_io1-oc-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 17 ( 17 ) Summary = 111 ( 111 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 17 ( 17 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 35 ( 35 )
-TOLERANCE : MaxTol = 1.00005e-007 ( 1.00005e-007 ) AvgTol = 1.000038767e-007 ( 1.000038767e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 7 ( 7 ) N2Labels = 0 ( 0 ) TotalLabels = 8 ( 8 ) NameLabels = 1 ( 1 ) ColorLabels = 8 ( 8 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 1 ( 1 ) Volume = 1 ( 1 ) Area = 1 ( 1 )
-NCOLORS : NColors = 3 ( 3 )
-COLORS : Colors = BLUE1 RED YELLOW ( BLUE1 RED YELLOW )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 7 -n2 0 -total 8 -withname 1 -withcolor 8 -withlayer 0 -centroid 1 -volume 1 -area 1 -colors { BLUE1 RED YELLOW } -nbcolors 3 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 17 -shape 111
+checkstatshape res_1 -solid 1 -shell 1 -face 17 -freewire 0 -freeedge 0 -sharededge 35
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.00005e-007 -avg 1.000038767e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 7 -n2 0 -total 8 -withname 1 -withcolor 8 -withlayer 0 -centroid 1 -volume 1 -area 1 -nbcolors 3 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 7 -n2 0 -total 8 -withname 1 -withcolor 8 -withlayer 0 -centroid 1 -volume 1 -area 1 -colors { BLUE1 RED YELLOW } -nbcolors 3 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 17 -shape 111 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 17 -freewire 0 -freeedge 0 -sharededge 35 -max_solid 1 -max_shell 1 -max_face 17 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.00005e-007 -avg 1.000038767e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj9_io1-tu-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 3 ) Warnings = 0 ( 0 ) Summary = 0 ( 3 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 16 ) Summary = 0 ( 16 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 29 ( 29 ) Summary = 193 ( 193 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 29 ( 29 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 70 ( 70 )
-TOLERANCE : MaxTol = 1.00005e-07 ( 1.00005e-07 ) AvgTol = 1.000039198e-07 ( 1.000039198e-07 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 2 ( 2 ) N2Labels = 0 ( 0 ) TotalLabels = 3 ( 3 ) NameLabels = 1 ( 1 ) ColorLabels = 3 ( 3 ) LayerLabels = 1 ( 1 )
-PROPS : Centroid = 1 ( 1 ) Volume = 1 ( 1 ) Area = 1 ( 1 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = RED YELLOW ( RED YELLOW )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 010 ( 010 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 3
+checkdoc "tpstat c" -max_warns 16 -max_faults 0
+checkxstat D_First -n0 1 -n1 2 -n2 0 -total 3 -withname 1 -withcolor 3 -withlayer 1 -centroid 1 -volume 1 -area 1 -colors { RED YELLOW } -nbcolors 2 -layers { 010 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 29 -shape 193
+checkstatshape res_1 -solid 1 -shell 1 -face 29 -freewire 0 -freeedge 0 -sharededge 70
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.00005e-07 -avg 1.000039198e-07]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 3
+checkdoc "tpstat c" -max_warns 16 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 2 -n2 0 -total 3 -withname 1 -withcolor 3 -withlayer 1 -centroid 1 -volume 1 -area 1 -nbcolors 2 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 2 -n2 0 -total 3 -withname 1 -withcolor 3 -withlayer 1 -centroid 1 -volume 1 -area 1 -colors { RED YELLOW } -nbcolors 2 -layers { 010 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 29 -shape 193 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 29 -freewire 0 -freeedge 0 -sharededge 70 -max_solid 1 -max_shell 1 -max_face 29 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.00005e-07 -avg 1.000039198e-07 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj9_io1-ug-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 12 ) Summary = 0 ( 12 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 17 ( 17 ) Summary = 121 ( 121 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 17 ( 17 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 40 ( 40 )
-TOLERANCE : MaxTol = 1.00005e-007 ( 1e-005 ) AvgTol = 1.000040078e-007 ( 6.417511167e-006 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 1 ( 1 ) N2Labels = 0 ( 0 ) TotalLabels = 2 ( 2 ) NameLabels = 1 ( 1 ) ColorLabels = 2 ( 2 ) LayerLabels = 1 ( 1 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = RED YELLOW ( RED YELLOW )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 1 ( 1 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 12 -max_faults 0
+checkxstat D_First -n0 1 -n1 1 -n2 0 -total 2 -withname 1 -withcolor 2 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { RED YELLOW } -nbcolors 2 -layers { 1 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 17 -shape 121
+checkstatshape res_1 -solid 1 -shell 1 -face 17 -freewire 0 -freeedge 0 -sharededge 40
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-005 -avg 6.417511167e-006]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 12 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 1 -n2 0 -total 2 -withname 1 -withcolor 2 -withlayer 1 -centroid 0 -volume 0 -area 0 -nbcolors 2 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 1 -n2 0 -total 2 -withname 1 -withcolor 2 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { RED YELLOW } -nbcolors 2 -layers { 1 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 17 -shape 121 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 17 -freewire 0 -freeedge 0 -sharededge 40 -max_solid 1 -max_shell 1 -max_face 17 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.00005e-007 -avg 1.000040078e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename ug_as1.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 14 ) Summary = 0 ( 14 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 5 ( 5 ) Shell = 5 ( 5 ) Face = 39 ( 39 ) Summary = 269 ( 269 )
-STATSHAPE : Solid = 18 ( 18 ) Shell = 18 ( 18 ) Face = 125 ( 125 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 91 ( 91 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1e-005 ) AvgTol = 1.00006917e-007 ( 2.879948407e-006 )
-LABELS : N0Labels = 9 ( 9 ) N1Labels = 13 ( 13 ) N2Labels = 0 ( 0 ) TotalLabels = 22 ( 22 ) NameLabels = 22 ( 22 ) ColorLabels = 5 ( 5 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = GREEN ( GREEN )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 14 -max_faults 0
+checkxstat D_First -n0 9 -n1 13 -n2 0 -total 22 -withname 22 -withcolor 5 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { GREEN } -nbcolors 1 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 5 -shell 5 -face 39 -shape 269
+checkstatshape res_1 -solid 18 -shell 18 -face 125 -freewire 0 -freeedge 0 -sharededge 91
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-005 -avg 2.879948407e-006]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 14 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 9 -n1 13 -n2 0 -total 22 -withname 22 -withcolor 5 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 9 -n1 13 -n2 0 -total 22 -withname 22 -withcolor 5 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { GREEN } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 5 -shell 5 -face 39 -shape 269 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 18 -shell 18 -face 125 -freewire 0 -freeedge 0 -sharededge 91 -max_solid 18 -max_shell 18 -max_face 125 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.00006917e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
-
set filename voilure-b.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 12 ( 0 ) Summary = 12 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 20 ( 20 ) Summary = 150 ( 150 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 20 ( 20 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 60 ( 60 )
-TOLERANCE : MaxTol = 6.484423484e-006 ( 6.484423307e-006 ) AvgTol = 8.894867981e-007 ( 8.894851162e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 20 -shape 150
+checkstatshape res_1 -solid 1 -shell 1 -face 20 -freewire 0 -freeedge 0 -sharededge 60
+set max_tol_res_1 [checkmaxtol res_1 -tol 6.484423307e-006 -avg 8.894851162e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 12 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 20 -shape 150 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 20 -freewire 0 -freeedge 0 -sharededge 60 -max_solid 1 -max_shell 1 -max_face 20 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 6.484423484e-006 -avg 8.894867981e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename tr9_3dt-ct.stp
-set ref_data {
-DATA : Faulties = 0 ( 2 ) Warnings = 0 ( 1 ) Summary = 0 ( 3 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 6 ( 6 ) Summary = 34 ( 34 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 6 ( 6 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 12 ( 12 )
-TOLERANCE : MaxTol = 1.000100003e-07 ( 1.000100003e-07 ) AvgTol = 1.00009231e-07 ( 1.00009231e-07 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 1 ( 1 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = MAGENTA1 ( MAGENTA1 )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 0 ( 0 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 1 -max_faults 2
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { MAGENTA1 } -nbcolors 1 -layers { 0 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 6 -shape 34
+checkstatshape res_1 -solid 1 -shell 1 -face 6 -freewire 0 -freeedge 0 -sharededge 12
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-07 -avg 1.00009231e-07]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 1 -max_faults 2
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { MAGENTA1 } -nbcolors 1 -layers { 0 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 6 -shape 34 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 6 -freewire 0 -freeedge 0 -sharededge 12 -max_solid 1 -max_shell 1 -max_face 6 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-07 -avg 1.00009231e-07 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename tr9_3dt-tc.stp
-set ref_data {
-DATA : Faulties = 0 ( 3 ) Warnings = 0 ( 0 ) Summary = 0 ( 3 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 6 ( 6 ) Summary = 34 ( 34 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 6 ( 6 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 12 ( 12 )
-TOLERANCE : MaxTol = 1.000100003e-07 ( 1.000100003e-07 ) AvgTol = 1.00009231e-07 ( 1.00009231e-07 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 1 ( 1 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = DARKVIOLET ( DARKVIOLET )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 015 ( 015 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 3
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { DARKVIOLET } -nbcolors 1 -layers { 015 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 6 -shape 34
+checkstatshape res_1 -solid 1 -shell 1 -face 6 -freewire 0 -freeedge 0 -sharededge 12
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-07 -avg 1.00009231e-07]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 3
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { DARKVIOLET } -nbcolors 1 -layers { 015 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 6 -shape 34 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 6 -freewire 0 -freeedge 0 -sharededge 12 -max_solid 1 -max_shell 1 -max_face 6 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-07 -avg 1.00009231e-07 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename tr9_3dt-td.stp
-set ref_data {
-DATA : Faulties = 0 ( 3 ) Warnings = 0 ( 0 ) Summary = 0 ( 3 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 6 ( 6 ) Summary = 34 ( 34 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 6 ( 6 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 12 ( 12 )
-TOLERANCE : MaxTol = 1.000100003e-07 ( 1.000100003e-07 ) AvgTol = 1.00009231e-07 ( 1.00009231e-07 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 1 ( 1 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = WHITE ( WHITE )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 000 ( 000 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 3
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { 000 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 6 -shape 34
+checkstatshape res_1 -solid 1 -shell 1 -face 6 -freewire 0 -freeedge 0 -sharededge 12
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-07 -avg 1.00009231e-07]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 3
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { 000 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 6 -shape 34 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 6 -freewire 0 -freeedge 0 -sharededge 12 -max_solid 1 -max_shell 1 -max_face 6 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-07 -avg 1.00009231e-07 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename tr9_bv1-ct.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 3 ( 3 ) Face = 18 ( 18 ) Summary = 100 ( 100 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 3 ( 3 ) Face = 18 ( 18 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 36 ( 36 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1.000100003e-007 ) AvgTol = 1.00009231e-007 ( 1.00009231e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 1 ( 1 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = WHITE ( WHITE )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 0 ( 0 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { 0 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 3 -face 18 -shape 100
+checkstatshape res_1 -solid 1 -shell 3 -face 18 -freewire 0 -freeedge 0 -sharededge 36
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-007 -avg 1.00009231e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { 0 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 3 -face 18 -shape 100 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 3 -face 18 -freewire 0 -freeedge 0 -sharededge 36 -max_solid 1 -max_shell 3 -max_face 18 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.00009231e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename tr9_bv1-db.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 3 ( 3 ) Face = 18 ( 18 ) Summary = 100 ( 100 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 3 ( 3 ) Face = 18 ( 18 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 36 ( 36 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1.000100003e-007 ) AvgTol = 1.00009231e-007 ( 1.00009231e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 1 ( 1 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = WHITE ( WHITE )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 0 ( { 0} )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { " 0" } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 3 -face 18 -shape 100
+checkstatshape res_1 -solid 1 -shell 3 -face 18 -freewire 0 -freeedge 0 -sharededge 36
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-007 -avg 1.00009231e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { 0 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 3 -face 18 -shape 100 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 3 -face 18 -freewire 0 -freeedge 0 -sharededge 36 -max_solid 1 -max_shell 3 -max_face 18 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.00009231e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename tr9_bv1-td.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 3 ( 3 ) Face = 18 ( 18 ) Summary = 100 ( 100 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 3 ( 3 ) Face = 18 ( 18 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 36 ( 36 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1.000100003e-007 ) AvgTol = 1.00009231e-007 ( 1.00009231e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 1 ( 1 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = WHITE ( WHITE )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 000 ( 000 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { 000 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 3 -face 18 -shape 100
+checkstatshape res_1 -solid 1 -shell 3 -face 18 -freewire 0 -freeedge 0 -sharededge 36
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-007 -avg 1.00009231e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { 000 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 3 -face 18 -shape 100 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 3 -face 18 -freewire 0 -freeedge 0 -sharededge 36 -max_solid 1 -max_shell 3 -max_face 18 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.00009231e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename brep_wv2.stp
-set ref_data {
-DATA : Faulties = 0 ( 1 ) Warnings = 0 ( 0 ) Summary = 0 ( 1 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 3 ( 3 ) Face = 18 ( 18 ) Summary = 100 ( 100 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 3 ( 3 ) Face = 18 ( 18 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 36 ( 36 )
-TOLERANCE : MaxTol = 1.000100003e-07 ( 1.000100003e-07 ) AvgTol = 1.00009231e-07 ( 1.00009231e-07 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 1 ( 1 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = WHITE ( WHITE )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 0 ( { 0} )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 1
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { " 0" } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 3 -face 18 -shape 100
+checkstatshape res_1 -solid 1 -shell 3 -face 18 -freewire 0 -freeedge 0 -sharededge 36
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-07 -avg 1.00009231e-07]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 1
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { 0 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 3 -face 18 -shape 100 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 3 -face 18 -freewire 0 -freeedge 0 -sharededge 36 -max_solid 1 -max_shell 3 -max_face 18 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-07 -avg 1.00009231e-07 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj2_f1-db-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 26 ) Warnings = 0 ( 7 ) Summary = 0 ( 33 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 6 ( 6 ) Summary = 6 ( 6 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 12 ( 12 ) Summary = 74 ( 74 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 12 ( 12 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 28 ( 28 )
-TOLERANCE : MaxTol = 2.387951736e-05 ( 2.442241729e-05 ) AvgTol = 7.483015831e-06 ( 7.582855671e-06 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 1 ( 1 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = WHITE ( WHITE )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 0 ( { 0} )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 9 -max_faults 25
+checkdoc "tpstat c" -max_warns 6 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { " 0" } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 12 -shape 74
+checkstatshape res_1 -solid 1 -shell 1 -face 12 -freewire 0 -freeedge 0 -sharededge 28
+set max_tol_res_1 [checkmaxtol res_1 -tol 2.442241729e-05 -avg 7.582855671e-06]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 9 -max_faults 25
+checkdoc "tpstat c" -max_warns 6 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 6 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { 0 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 12 -shape 74 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 12 -freewire 0 -freeedge 0 -sharededge 28 -max_solid 1 -max_shell 1 -max_face 12 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 2.387951736e-05 -avg 7.483015831e-06 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj8_k1-md-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 2 ( 10 ) Summary = 2 ( 10 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 30 ( 30 ) Summary = 205 ( 205 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 30 ( 30 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 84 ( 84 )
-TOLERANCE : MaxTol = 0.0003868703974 ( 0.000614641247 ) AvgTol = 2.28956901e-005 ( 3.880765927e-005 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 1 ( 1 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = WHITE ( WHITE )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 2 ( 2 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 10 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { 2 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 1 -face 30 -shape 205
+checkstatshape res_1 -solid 0 -shell 1 -face 30 -freewire 0 -freeedge 0 -sharededge 84
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.000614641247 -avg 3.880765927e-005]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 10 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { 2 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 1 -face 30 -shape 205 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 1 -face 30 -freewire 0 -freeedge 0 -sharededge 84 -max_solid 0 -max_shell 1 -max_face 30 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.0003868703974 -avg 2.28956901e-005 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj2_io1-md-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 12 ) Summary = 0 ( 12 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 17 ( 17 ) Summary = 127 ( 127 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 17 ( 17 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 43 ( 43 )
-TOLERANCE : MaxTol = 1.00005e-007 ( 1e-005 ) AvgTol = 1.000039636e-007 ( 6.148001564e-006 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 1 ( 1 )
-PROPS : Centroid = 1 ( 1 ) Volume = 1 ( 1 ) Area = 1 ( 1 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = YELLOW ( YELLOW )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 1 ( 1 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 12 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 1 -volume 1 -area 1 -colors { YELLOW } -nbcolors 1 -layers { 1 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 17 -shape 127
+checkstatshape res_1 -solid 1 -shell 1 -face 17 -freewire 0 -freeedge 0 -sharededge 43
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-005 -avg 6.148001564e-006]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 12 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 1 -volume 1 -area 1 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 1 -volume 1 -area 1 -colors { YELLOW } -nbcolors 1 -layers { 1 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 17 -shape 127 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 17 -freewire 0 -freeedge 0 -sharededge 43 -max_solid 1 -max_shell 1 -max_face 17 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.00005e-007 -avg 1.000039636e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj3_d1-db-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 44 ) Warnings = 0 ( 0 ) Summary = 0 ( 44 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 9 ( 9 ) Summary = 55 ( 55 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 9 ( 9 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 21 ( 21 )
-TOLERANCE : MaxTol = 1.000100003e-07 ( 1.000100003e-07 ) AvgTol = 1.000093336e-07 ( 1.000093336e-07 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 1 ( 1 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = WHITE ( WHITE )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 0 ( { 0} )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 44
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { " 0" } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 9 -shape 55
+checkstatshape res_1 -solid 1 -shell 1 -face 9 -freewire 0 -freeedge 0 -sharededge 21
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-07 -avg 1.000093336e-07]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 44
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { "0" } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 9 -shape 55 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 9 -freewire 0 -freeedge 0 -sharededge 21 -max_solid 1 -max_shell 1 -max_face 9 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-07 -avg 1.000093336e-07 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj4_d2-db-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 63 ) Warnings = 0 ( 0 ) Summary = 0 ( 63 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 9 ( 9 ) Summary = 55 ( 55 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 9 ( 9 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 21 ( 21 )
-TOLERANCE : MaxTol = 1.000100003e-07 ( 1.000100003e-07 ) AvgTol = 1.000093336e-07 ( 1.000093336e-07 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 1 ( 1 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = WHITE ( WHITE )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 0 ( { 0} )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 63
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { " 0" } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 9 -shape 55
+checkstatshape res_1 -solid 1 -shell 1 -face 9 -freewire 0 -freeedge 0 -sharededge 21
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-07 -avg 1.000093336e-07]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 63
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { "0" } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 9 -shape 55 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 9 -freewire 0 -freeedge 0 -sharededge 21 -max_solid 1 -max_shell 1 -max_face 9 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-07 -avg 1.000093336e-07 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj4_d2-tu-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 28 ) Warnings = 0 ( 0 ) Summary = 0 ( 28 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 9 ( 9 ) Summary = 55 ( 55 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 9 ( 9 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 21 ( 21 )
-TOLERANCE : MaxTol = 1.000100003e-07 ( 1.000100003e-07 ) AvgTol = 1.000093336e-07 ( 1.000093336e-07 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 1 ( 1 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = GREEN ( GREEN )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 001 ( 001 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 28
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { GREEN } -nbcolors 1 -layers { 001 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 9 -shape 55
+checkstatshape res_1 -solid 1 -shell 1 -face 9 -freewire 0 -freeedge 0 -sharededge 21
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-07 -avg 1.000093336e-07]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 28
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { GREEN } -nbcolors 1 -layers { 001 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 9 -shape 55 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 9 -freewire 0 -freeedge 0 -sharededge 21 -max_solid 1 -max_shell 1 -max_face 9 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-07 -avg 1.000093336e-07 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename pr2db.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 6 ( 6 ) Summary = 34 ( 34 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 6 ( 6 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 12 ( 12 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1.000100003e-007 ) AvgTol = 1.00009231e-007 ( 1.00009231e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 1 ( 1 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = RED ( RED )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 0 ( 0 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { RED } -nbcolors 1 -layers { 0 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 6 -shape 34
+checkstatshape res_1 -solid 1 -shell 1 -face 6 -freewire 0 -freeedge 0 -sharededge 12
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-007 -avg 1.00009231e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { RED } -nbcolors 1 -layers { 0 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 6 -shape 34 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 6 -freewire 0 -freeedge 0 -sharededge 12 -max_solid 1 -max_shell 1 -max_face 6 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.00009231e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj5_d3-db-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 64 ) Warnings = 0 ( 0 ) Summary = 0 ( 64 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 9 ( 9 ) Summary = 55 ( 55 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 9 ( 9 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 21 ( 21 )
-TOLERANCE : MaxTol = 1.000100003e-07 ( 1.000100003e-07 ) AvgTol = 1.000093336e-07 ( 1.000093336e-07 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 1 ( 1 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = WHITE ( WHITE )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 0 ( { 0} )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 64
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { " 0" } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 9 -shape 55
+checkstatshape res_1 -solid 1 -shell 1 -face 9 -freewire 0 -freeedge 0 -sharededge 21
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-07 -avg 1.000093336e-07]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 64
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { 0 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 9 -shape 55 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 9 -freewire 0 -freeedge 0 -sharededge 21 -max_solid 1 -max_shell 1 -max_face 9 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-07 -avg 1.000093336e-07 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj5_d3-tu-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 26 ) Warnings = 0 ( 0 ) Summary = 0 ( 26 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 9 ( 9 ) Summary = 55 ( 55 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 9 ( 9 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 21 ( 21 )
-TOLERANCE : MaxTol = 1.000100003e-07 ( 1.000100003e-07 ) AvgTol = 1.000093336e-07 ( 1.000093336e-07 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 1 ( 1 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = GREEN ( GREEN )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 001 ( 001 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 26
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { GREEN } -nbcolors 1 -layers { 001 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 9 -shape 55
+checkstatshape res_1 -solid 1 -shell 1 -face 9 -freewire 0 -freeedge 0 -sharededge 21
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-07 -avg 1.000093336e-07]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 26
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { GREEN } -nbcolors 1 -layers { 001 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 9 -shape 55 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 9 -freewire 0 -freeedge 0 -sharededge 21 -max_solid 1 -max_shell 1 -max_face 9 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-07 -avg 1.000093336e-07 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj5_k1-ug-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 10 ) Summary = 0 ( 10 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 44 ( 44 ) Summary = 287 ( 287 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 44 ( 44 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 118 ( 118 )
-TOLERANCE : MaxTol = 0.004260923847 ( 0.004260923847 ) AvgTol = 0.0002558561664 ( 0.0002570770616 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 1 ( 1 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = CYAN1 ( CYAN1 )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 1 ( 1 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 10 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { CYAN1 } -nbcolors 1 -layers { 1 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 1 -face 44 -shape 287
+checkstatshape res_1 -solid 0 -shell 1 -face 44 -freewire 0 -freeedge 0 -sharededge 118
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.004260923847 -avg 0.0002570770616]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 10 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { CYAN1 } -nbcolors 1 -layers { 1 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 1 -face 44 -shape 287 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 1 -face 44 -freewire 0 -freeedge 0 -sharededge 118 -max_solid 0 -max_shell 1 -max_face 44 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.004260923847 -avg 0.0002558561664 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename bm2_sy_lever-A.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 5 ) Summary = 0 ( 5 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 50 ( 50 ) Summary = 328 ( 328 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 50 ( 50 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 133 ( 133 )
-TOLERANCE : MaxTol = 4.305225726e-007 ( 0.0001910564609 ) AvgTol = 1.039061036e-007 ( 7.176472402e-006 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 1 ( 1 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = RED ( RED )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 8 ( 8 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 5 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { RED } -nbcolors 1 -layers { 8 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 50 -shape 328
+checkstatshape res_1 -solid 1 -shell 1 -face 50 -freewire 0 -freeedge 0 -sharededge 133
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.0001910564609 -avg 7.176472402e-006]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 5 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { RED } -nbcolors 1 -layers { 8 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 50 -shape 328 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 50 -freewire 0 -freeedge 0 -sharededge 133 -max_solid 1 -max_shell 1 -max_face 50 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 4.305225726e-007 -avg 1.039061036e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename tr10_3dtxt_1_sd.stp
-set ref_data {
-DATA : Faulties = 0 ( 8 ) Warnings = 0 ( 0 ) Summary = 0 ( 8 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 6 ( 6 ) Summary = 34 ( 34 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 6 ( 6 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 12 ( 12 )
-TOLERANCE : MaxTol = 1.000100003e-07 ( 1.000100003e-07 ) AvgTol = 1.00009231e-07 ( 1.00009231e-07 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = MATRAGRAY ( MATRAGRAY )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 8
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { MATRAGRAY } -nbcolors 1 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 6 -shape 34
+checkstatshape res_1 -solid 1 -shell 1 -face 6 -freewire 0 -freeedge 0 -sharededge 12
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-07 -avg 1.00009231e-07]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 8
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { MATRAGRAY } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 6 -shape 34 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 6 -freewire 0 -freeedge 0 -sharededge 12 -max_solid 1 -max_shell 1 -max_face 6 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-07 -avg 1.00009231e-07 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename tr10_3dtxt_2_sd.stp
-set ref_data {
-DATA : Faulties = 0 ( 10 ) Warnings = 0 ( 0 ) Summary = 0 ( 10 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 6 ( 6 ) Summary = 34 ( 34 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 6 ( 6 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 12 ( 12 )
-TOLERANCE : MaxTol = 1.000100003e-07 ( 1.000100003e-07 ) AvgTol = 1.00009231e-07 ( 1.00009231e-07 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = MATRAGRAY ( MATRAGRAY )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 10
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { MATRAGRAY } -nbcolors 1 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 6 -shape 34
+checkstatshape res_1 -solid 1 -shell 1 -face 6 -freewire 0 -freeedge 0 -sharededge 12
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-07 -avg 1.00009231e-07]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 10
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { MATRAGRAY } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 6 -shape 34 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 6 -freewire 0 -freeedge 0 -sharededge 12 -max_solid 1 -max_shell 1 -max_face 6 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-07 -avg 1.00009231e-07 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj6_d3-db-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 63 ) Warnings = 0 ( 0 ) Summary = 0 ( 63 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 9 ( 9 ) Summary = 55 ( 55 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 9 ( 9 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 21 ( 21 )
-TOLERANCE : MaxTol = 1.000100003e-07 ( 1.000100003e-07 ) AvgTol = 1.000093336e-07 ( 1.000093336e-07 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 1 ( 1 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = WHITE ( WHITE )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 0 ( { 0} )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 63
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { " 0" } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 9 -shape 55
+checkstatshape res_1 -solid 1 -shell 1 -face 9 -freewire 0 -freeedge 0 -sharededge 21
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-07 -avg 1.000093336e-07]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 63
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { 0 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 9 -shape 55 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 9 -freewire 0 -freeedge 0 -sharededge 21 -max_solid 1 -max_shell 1 -max_face 9 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-07 -avg 1.000093336e-07 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename tr8_bv1_sy.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 3 ( 3 ) Face = 18 ( 18 ) Summary = 100 ( 100 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 3 ( 3 ) Face = 18 ( 18 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 36 ( 36 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1.000100003e-007 ) AvgTol = 1.00009231e-007 ( 1.00009231e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 1 ( 1 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = RED ( RED )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 2 ( 2 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { RED } -nbcolors 1 -layers { 2 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 3 -face 18 -shape 100
+checkstatshape res_1 -solid 1 -shell 3 -face 18 -freewire 0 -freeedge 0 -sharededge 36
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-007 -avg 1.00009231e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { RED } -nbcolors 1 -layers { 2 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 3 -face 18 -shape 100 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 3 -face 18 -freewire 0 -freeedge 0 -sharededge 36 -max_solid 1 -max_shell 3 -max_face 18 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.00009231e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename tr8_bv1_tc.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 3 ( 3 ) Face = 18 ( 18 ) Summary = 100 ( 100 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 3 ( 3 ) Face = 18 ( 18 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 36 ( 36 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1.000100003e-007 ) AvgTol = 1.00009231e-007 ( 1.00009231e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 1 ( 1 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = GREEN ( GREEN )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 005 ( 005 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { GREEN } -nbcolors 1 -layers { 005 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 3 -face 18 -shape 100
+checkstatshape res_1 -solid 1 -shell 3 -face 18 -freewire 0 -freeedge 0 -sharededge 36
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-007 -avg 1.00009231e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { GREEN } -nbcolors 1 -layers { 005 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 3 -face 18 -shape 100 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 3 -face 18 -freewire 0 -freeedge 0 -sharededge 36 -max_solid 1 -max_shell 3 -max_face 18 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.00009231e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename tr8_bv1_ug.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 3 ( 3 ) Face = 18 ( 18 ) Summary = 100 ( 100 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 3 ( 3 ) Face = 18 ( 18 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 36 ( 36 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1.000100003e-007 ) AvgTol = 1.00009231e-007 ( 1.00009231e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = GREEN ( GREEN )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { GREEN } -nbcolors 1 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 3 -face 18 -shape 100
+checkstatshape res_1 -solid 1 -shell 3 -face 18 -freewire 0 -freeedge 0 -sharededge 36
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-007 -avg 1.00009231e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { GREEN } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 3 -face 18 -shape 100 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 3 -face 18 -freewire 0 -freeedge 0 -sharededge 36 -max_solid 1 -max_shell 3 -max_face 18 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.00009231e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename extref.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 0 ( 0 ) Summary = 1 ( 1 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 0 ( 0 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 0 ( 0 )
-TOLERANCE : MaxTol = 0 ( 0 ) AvgTol = 0 ( 0 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 1 ) N2Labels = 0 ( 1 ) TotalLabels = 1 ( 3 ) NameLabels = 1 ( 2 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 1 -n2 1 -total 3 -withname 2 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 0 -shape 1
+checkstatshape res_1 -solid 0 -shell 0 -face 0 -freewire 0 -freeedge 0 -sharededge 0
+set max_tol_res_1 [checkmaxtol res_1 -tol 0 -avg 0]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 1 -n2 1 -total 3 -withname 2 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 0 -face 0 -shape 1 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 0 -freewire 0 -freeedge 0 -sharededge 0 -max_solid 0 -max_shell 0 -max_face 0 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0 -avg 0 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename s1-id-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 0 ( 0 ) Summary = 13 ( 13 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 0 ( 0 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 0 ( 0 )
-TOLERANCE : MaxTol = 0 ( 0 ) AvgTol = 0 ( 0 )
-LABELS : N0Labels = 13 ( 13 ) N1Labels = 14 ( 22 ) N2Labels = 0 ( 8 ) TotalLabels = 27 ( 43 ) NameLabels = 27 ( 35 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 1 ( 1 ) Volume = 1 ( 1 ) Area = 1 ( 1 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 13 -n1 22 -n2 8 -total 43 -withname 35 -withcolor 0 -withlayer 0 -centroid 1 -volume 1 -area 1 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 0 -shape 13
+checkstatshape res_1 -solid 0 -shell 0 -face 0 -freewire 0 -freeedge 0 -sharededge 0
+set max_tol_res_1 [checkmaxtol res_1 -tol 0 -avg 0]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 13 -n1 22 -n2 8 -total 43 -withname 35 -withcolor 0 -withlayer 0 -centroid 1 -volume 1 -area 1 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 13 -n1 14 -n2 0 -total 27 -withname 27 -withcolor 0 -withlayer 0 -centroid 1 -volume 1 -area 1 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 0 -face 0 -shape 13 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 0 -freewire 0 -freeedge 0 -sharededge 0 -max_solid 0 -max_shell 0 -max_face 0 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0 -avg 0 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
puts "TODO CR23096 ALL: PROPS : Faulty"
-
set filename s1-pe-214-edited-update.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 0 ( 0 ) Summary = 13 ( 13 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 0 ( 0 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 0 ( 0 )
-TOLERANCE : MaxTol = 0 ( 0 ) AvgTol = 0 ( 0 )
-LABELS : N0Labels = 13 ( 13 ) N1Labels = 14 ( 22 ) N2Labels = 0 ( 8 ) TotalLabels = 27 ( 43 ) NameLabels = 27 ( 35 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 13 ( 27 ) Volume = 13 ( 13 ) Area = 13 ( 13 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 13 -n1 22 -n2 8 -total 43 -withname 35 -withcolor 0 -withlayer 0 -centroid 27 -volume 13 -area 13 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 0 -shape 13
+checkstatshape res_1 -solid 0 -shell 0 -face 0 -freewire 0 -freeedge 0 -sharededge 0
+set max_tol_res_1 [checkmaxtol res_1 -tol 0 -avg 0]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 13 -n1 22 -n2 8 -total 43 -withname 35 -withcolor 0 -withlayer 0 -centroid 27 -volume 13 -area 13 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 13 -n1 14 -n2 0 -total 27 -withname 27 -withcolor 0 -withlayer 0 -centroid 13 -volume 13 -area 13 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 0 -face 0 -shape 13 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 0 -freewire 0 -freeedge 0 -sharededge 0 -max_solid 0 -max_shell 0 -max_face 0 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0 -avg 0 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
puts "TODO CR23096 ALL: PROPS : Faulty"
-
set filename s1-ec-214-update.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 0 ( 0 ) Summary = 13 ( 13 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 0 ( 0 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 0 ( 0 )
-TOLERANCE : MaxTol = 0 ( 0 ) AvgTol = 0 ( 0 )
-LABELS : N0Labels = 13 ( 13 ) N1Labels = 14 ( 22 ) N2Labels = 0 ( 8 ) TotalLabels = 27 ( 43 ) NameLabels = 27 ( 35 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 13 ( 27 ) Volume = 5 ( 5 ) Area = 5 ( 5 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 13 -n1 22 -n2 8 -total 43 -withname 35 -withcolor 0 -withlayer 0 -centroid 27 -volume 5 -area 5 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 0 -shape 13
+checkstatshape res_1 -solid 0 -shell 0 -face 0 -freewire 0 -freeedge 0 -sharededge 0
+set max_tol_res_1 [checkmaxtol res_1 -tol 0 -avg 0]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 13 -n1 22 -n2 8 -total 43 -withname 35 -withcolor 0 -withlayer 0 -centroid 27 -volume 5 -area 5 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 13 -n1 14 -n2 0 -total 27 -withname 27 -withcolor 0 -withlayer 0 -centroid 13 -volume 5 -area 5 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 0 -face 0 -shape 13 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 0 -freewire 0 -freeedge 0 -sharededge 0 -max_solid 0 -max_shell 0 -max_face 0 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0 -avg 0 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
puts "TODO CR23096 ALL: PROPS : Faulty"
-
set filename s1-pe-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 9 ) Warnings = 0 ( 0 ) Summary = 0 ( 9 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 0 ( 0 ) Summary = 13 ( 13 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 0 ( 0 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 0 ( 0 )
-TOLERANCE : MaxTol = 0 ( 0 ) AvgTol = 0 ( 0 )
-LABELS : N0Labels = 13 ( 13 ) N1Labels = 14 ( 22 ) N2Labels = 0 ( 8 ) TotalLabels = 27 ( 43 ) NameLabels = 27 ( 35 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 13 ( 27 ) Volume = 13 ( 13 ) Area = 13 ( 13 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 9
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 13 -n1 22 -n2 8 -total 43 -withname 35 -withcolor 0 -withlayer 0 -centroid 27 -volume 13 -area 13 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 0 -shape 13
+checkstatshape res_1 -solid 0 -shell 0 -face 0 -freewire 0 -freeedge 0 -sharededge 0
+set max_tol_res_1 [checkmaxtol res_1 -tol 0 -avg 0]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 9
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 13 -n1 22 -n2 8 -total 43 -withname 35 -withcolor 0 -withlayer 0 -centroid 27 -volume 13 -area 13 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 13 -n1 14 -n2 0 -total 27 -withname 27 -withcolor 0 -withlayer 0 -centroid 13 -volume 13 -area 13 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 0 -face 0 -shape 13 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 0 -freewire 0 -freeedge 0 -sharededge 0 -max_solid 0 -max_shell 0 -max_face 0 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0 -avg 0 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
puts "TODO CR23096 ALL: PROPS : Faulty"
-
set filename s1-tc-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 28 ) Summary = 0 ( 28 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 0 ( 0 ) Summary = 13 ( 13 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 0 ( 0 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 0 ( 0 )
-TOLERANCE : MaxTol = 0 ( 0 ) AvgTol = 0 ( 0 )
-LABELS : N0Labels = 13 ( 13 ) N1Labels = 14 ( 22 ) N2Labels = 0 ( 8 ) TotalLabels = 27 ( 43 ) NameLabels = 27 ( 35 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 13 ( 27 ) Volume = 13 ( 13 ) Area = 13 ( 13 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 28 -max_faults 0
+checkxstat D_First -n0 13 -n1 22 -n2 8 -total 43 -withname 35 -withcolor 0 -withlayer 0 -centroid 27 -volume 13 -area 13 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 0 -shape 13
+checkstatshape res_1 -solid 0 -shell 0 -face 0 -freewire 0 -freeedge 0 -sharededge 0
+set max_tol_res_1 [checkmaxtol res_1 -tol 0 -avg 0]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 28 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 13 -n1 22 -n2 8 -total 43 -withname 35 -withcolor 0 -withlayer 0 -centroid 27 -volume 13 -area 13 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 13 -n1 14 -n2 0 -total 27 -withname 27 -withcolor 0 -withlayer 0 -centroid 13 -volume 13 -area 13 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 0 -face 0 -shape 13 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 0 -freewire 0 -freeedge 0 -sharededge 0 -max_solid 0 -max_shell 0 -max_face 0 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0 -avg 0 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
-
set filename bm4_db_seal_b.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 117 ( 39 ) Summary = 117 ( 39 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 3 ( 3 ) Face = 140 ( 140 ) Summary = 704 ( 704 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 3 ( 3 ) Face = 140 ( 140 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 280 ( 280 )
-TOLERANCE : MaxTol = 0.0004823436197 ( 0.0004827870033 ) AvgTol = 0.0001575316088 ( 0.000165115431 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 1 ( 1 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = RED ( RED )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 49 ( { 49} )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 39 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { RED } -nbcolors 1 -layers { " 49" } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 3 -face 140 -shape 704
+checkstatshape res_1 -solid 1 -shell 3 -face 140 -freewire 0 -freeedge 0 -sharededge 280
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.0004827870033 -avg 0.000165115431]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 39 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 118 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { RED } -nbcolors 1 -layers { "49" } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 3 -face 140 -shape 704 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 3 -face 140 -freewire 0 -freeedge 0 -sharededge 280 -max_solid 1 -max_shell 3 -max_face 140 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.0004823436197 -avg 0.0001575316088 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
-
-set ProductMode OFF
set filename PRO20361-2.stp
-set ref_data {
-DATA : Faulties = 0 ( 4 ) Warnings = 0 ( 0 ) Summary = 0 ( 4 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 3 ) Summary = 0 ( 3 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 48 ( 48 ) Face = 48 ( 48 ) Summary = 705 ( 705 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 48 ( 48 ) Face = 48 ( 48 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 266 ( 266 )
-TOLERANCE : MaxTol = 0.001635034952 ( 0.001635034951 ) AvgTol = 1.541289792e-05 ( 1.541289793e-05 )
-LABELS : N0Labels = 1 ( 2 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 2 ) NameLabels = 1 ( 2 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename} -productmode 0
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 4
+checkdoc "tpstat c" -max_warns 3 -max_faults 0
+checkxstat D_First -n0 2 -n1 0 -n2 0 -total 2 -withname 2 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 48 -face 48 -shape 705
+checkstatshape res_1 -solid 0 -shell 48 -face 48 -freewire 0 -freeedge 0 -sharededge 266
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.001635034951 -avg 1.541289793e-05]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 4
+checkdoc "tpstat c" -max_warns 3 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 2 -n1 0 -n2 0 -total 2 -withname 2 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 48 -face 48 -shape 705 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 48 -face 48 -freewire 0 -freeedge 0 -sharededge 266 -max_solid 0 -max_shell 48 -max_face 48 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.001635034952 -avg 1.541289792e-05 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
-
set filename ass-tol2.stp
-set ref_data {
-DATA : Faulties = 0 ( 200 ) Warnings = 0 ( 0 ) Summary = 0 ( 200 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 155 ( 30 ) Summary = 155 ( 30 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 17 ( 17 ) Shell = 17 ( 17 ) Face = 366 ( 366 ) Summary = 2774 ( 2752 )
-STATSHAPE : Solid = 23 ( 23 ) Shell = 23 ( 23 ) Face = 402 ( 402 ) FreeWire = 0 ( 0 ) FreeEdge = 21 ( 21 ) SharedEdge = 1095 ( 1095 )
-TOLERANCE : MaxTol = 0.0009825722198 ( 0.0009825722195 ) AvgTol = 5.215035253e-05 ( 5.153575432e-05 )
-LABELS : N0Labels = 14 ( 14 ) N1Labels = 19 ( 19 ) N2Labels = 0 ( 0 ) TotalLabels = 33 ( 33 ) NameLabels = 33 ( 33 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 200
+checkdoc "tpstat c" -max_warns 30 -max_faults 0
+checkxstat D_First -n0 14 -n1 19 -n2 0 -total 33 -withname 33 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 17 -shell 17 -face 366 -shape 2752
+checkstatshape res_1 -solid 23 -shell 23 -face 402 -freewire 0 -freeedge 21 -sharededge 1095
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.0009825722195 -avg 5.153575432e-05]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 200
+checkdoc "tpstat c" -max_warns 30 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 155 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 14 -n1 19 -n2 0 -total 33 -withname 33 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 14 -n1 19 -n2 0 -total 33 -withname 33 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 17 -shell 17 -face 366 -shape 2774 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 23 -shell 23 -face 402 -freewire 0 -freeedge 21 -sharededge 1095 -max_solid 23 -max_shell 23 -max_face 402 -max_freewire 0 -max_freeedge 21
+checkmaxtol res_2 -tol 0.0009825722198 -avg 5.215035253e-05 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename tr9_r0501-ug.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 1 ( 398 ) Summary = 1 ( 398 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 538 ( 538 ) Summary = 3329 ( 3329 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 538 ( 538 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 1281 ( 1281 )
-TOLERANCE : MaxTol = 1.956041309e-05 ( 0.0003145873437 ) AvgTol = 8.906777274e-07 ( 7.728096578e-06 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = MAGENTA1 ( MAGENTA1 )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 398 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { MAGENTA1 } -nbcolors 1 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 538 -shape 3329
+checkstatshape res_1 -solid 1 -shell 1 -face 538 -freewire 0 -freeedge 0 -sharededge 1281
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.0003145873437 -avg 7.728096578e-06]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 398 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { MAGENTA1 } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 538 -shape 3329 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 538 -freewire 0 -freeedge 0 -sharededge 1281 -max_solid 1 -max_shell 1 -max_face 538 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.956041309e-05 -avg 8.906777274e-07 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: STATSHAPE : Faulty"
-
set filename bm4_ug_punch_d.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 9 ( 40 ) Summary = 9 ( 40 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 3 ( 3 ) Shell = 36 ( 3 ) Face = 186 ( 186 ) Summary = 1404 ( 1371 )
-STATSHAPE : Solid = 3 ( 3 ) Shell = 36 ( 3 ) Face = 186 ( 186 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 548 ( 548 )
-TOLERANCE : MaxTol = 0.001493912454 ( 0.001493912451 ) AvgTol = 2.360117771e-005 ( 2.424782868e-005 )
-LABELS : N0Labels = 5 ( 5 ) N1Labels = 37 ( 37 ) N2Labels = 0 ( 0 ) TotalLabels = 42 ( 42 ) NameLabels = 9 ( 9 ) ColorLabels = 36 ( 36 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 3 ( 3 )
-COLORS : Colors = MAGENTA1 MEDIUMSEAGREEN RED4 ( MAGENTA1 MEDIUMSEAGREEN RED4 )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 40 -max_faults 0
+checkxstat D_First -n0 5 -n1 37 -n2 0 -total 42 -withname 9 -withcolor 36 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { MAGENTA1 MEDIUMSEAGREEN RED4 } -nbcolors 3 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 3 -shell 3 -face 186 -shape 1371
+checkstatshape res_1 -solid 3 -shell 3 -face 186 -freewire 0 -freeedge 0 -sharededge 548
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.001493912451 -avg 2.424782868e-005]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 40 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 9 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 5 -n1 37 -n2 0 -total 42 -withname 9 -withcolor 36 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 3 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 5 -n1 37 -n2 0 -total 42 -withname 9 -withcolor 36 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { MAGENTA1 MEDIUMSEAGREEN RED4 } -nbcolors 3 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 3 -shell 36 -face 186 -shape 1404 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 3 -shell 36 -face 186 -freewire 0 -freeedge 0 -sharededge 548 -max_solid 3 -max_shell 3 -max_face 186 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.001493912454 -avg 2.360117771e-005 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
set filename r86ug.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 2 ( 127 ) Summary = 2 ( 127 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 27 ( 27 ) Shell = 28 ( 28 ) Face = 479 ( 479 ) Summary = 2919 ( 2919 )
-STATSHAPE : Solid = 27 ( 27 ) Shell = 28 ( 28 ) Face = 479 ( 479 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 1120 ( 1120 )
-TOLERANCE : MaxTol = 8.47188394e-06 ( 1e-05 ) AvgTol = 5.153699897e-07 ( 2.36694229e-06 )
-LABELS : N0Labels = 16 ( 16 ) N1Labels = 15 ( 15 ) N2Labels = 0 ( 0 ) TotalLabels = 31 ( 31 ) NameLabels = 31 ( 31 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 127 -max_faults 0
+checkxstat D_First -n0 16 -n1 15 -n2 0 -total 31 -withname 31 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 27 -shell 28 -face 479 -shape 2919
+checkstatshape res_1 -solid 27 -shell 28 -face 479 -freewire 0 -freeedge 0 -sharededge 1120
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-05 -avg 2.36694229e-06]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 127 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 16 -n1 15 -n2 0 -total 31 -withname 31 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 16 -n1 15 -n2 0 -total 31 -withname 31 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 27 -shell 28 -face 479 -shape 2919 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 27 -shell 28 -face 479 -freewire 0 -freeedge 0 -sharededge 1120 -max_solid 27 -max_shell 28 -max_face 479 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 8.47188394e-06 -avg 5.153699897e-07 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: NBSHAPES : Faulty"
-
set filename t3d_opt.stp
-set ref_data {
-DATA : Faulties = 0 ( 126 ) Warnings = 0 ( 210 ) Summary = 0 ( 336 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 4 ( 85 ) Summary = 4 ( 85 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 34 ( 34 ) Shell = 34 ( 34 ) Face = 254 ( 254 ) Summary = 1477 ( 1508 )
-STATSHAPE : Solid = 34 ( 34 ) Shell = 34 ( 34 ) Face = 254 ( 254 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 546 ( 577 )
-TOLERANCE : MaxTol = 4.686868233 ( 4.686868233 ) AvgTol = 0.06081724539 ( 0.05855797358 )
-LABELS : N0Labels = 42 ( 42 ) N1Labels = 41 ( 41 ) N2Labels = 0 ( 0 ) TotalLabels = 83 ( 83 ) NameLabels = 83 ( 83 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 210 -max_faults 126
+checkdoc "tpstat c" -max_warns 85 -max_faults 0
+checkxstat D_First -n0 42 -n1 41 -n2 0 -total 83 -withname 83 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 34 -shell 34 -face 254 -shape 1508
+checkstatshape res_1 -solid 34 -shell 34 -face 254 -freewire 0 -freeedge 0 -sharededge 577
+set max_tol_res_1 [checkmaxtol res_1 -tol 4.686868233 -avg 0.05855797358]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 210 -max_faults 126
+checkdoc "tpstat c" -max_warns 85 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 3 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 42 -n1 41 -n2 0 -total 83 -withname 83 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 42 -n1 41 -n2 0 -total 83 -withname 83 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 34 -shell 34 -face 254 -shape 1477 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 34 -shell 34 -face 254 -freewire 0 -freeedge 0 -sharededge 546 -max_solid 34 -max_shell 34 -max_face 254 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 4.686868233 -avg 0.06081724539 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename trj5_pm3-ac-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 1 ) Warnings = 0 ( 0 ) Summary = 0 ( 1 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 20 ( 31 ) Summary = 20 ( 31 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 49 ( 49 ) Shell = 49 ( 49 ) Face = 615 ( 615 ) Summary = 4330 ( 4234 )
-STATSHAPE : Solid = 88 ( 88 ) Shell = 88 ( 88 ) Face = 1079 ( 1079 ) FreeWire = 0 ( 0 ) FreeEdge = 96 ( 96 ) SharedEdge = 1611 ( 1611 )
-TOLERANCE : MaxTol = 0.007650852625 ( 0.00792935897 ) AvgTol = 8.776936133e-05 ( 8.913893466e-05 )
-LABELS : N0Labels = 78 ( 78 ) N1Labels = 196 ( 202 ) N2Labels = 0 ( 0 ) TotalLabels = 274 ( 280 ) NameLabels = 178 ( 178 ) ColorLabels = 145 ( 145 ) LayerLabels = 145 ( 151 )
-PROPS : Centroid = 74 ( 74 ) Volume = 74 ( 74 ) Area = 74 ( 74 )
-NCOLORS : NColors = 16 ( 16 )
-COLORS : Colors = BLUE1 CYAN1 DARKGREEN DARKORANGE1 DEEPPINK2 FIREBRICK FIREBRICK1 GREEN LIGHTGOLDENROD1 MAGENTA1 ORANGE4 PALEGREEN PURPLE RED WHITE YELLOW ( BLUE1 CYAN1 DARKGREEN DARKORANGE1 DEEPPINK2 FIREBRICK FIREBRICK1 GREEN LIGHTGOLDENROD1 MAGENTA1 ORANGE4 PALEGREEN PURPLE RED WHITE YELLOW )
-NLAYERS : NLayers = 10 ( 10 )
-LAYERS : Layers = 0 15 18 26 27 9153S07|06 9153S08|07 9153S09|08 GU2_assy|26 TEMP ( 0 15 18 26 27 9153S07|06 9153S08|07 9153S09|08 GU2_assy|26 TEMP )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 1
+checkdoc "tpstat c" -max_warns 31 -max_faults 0
+checkxstat D_First -n0 78 -n1 202 -n2 0 -total 280 -withname 178 -withcolor 145 -withlayer 151 -centroid 74 -volume 74 -area 74 -colors { BLUE1 CYAN1 DARKGREEN DARKORANGE1 DEEPPINK2 FIREBRICK FIREBRICK1 GREEN LIGHTGOLDENROD1 MAGENTA1 ORANGE4 PALEGREEN PURPLE RED WHITE YELLOW } -nbcolors 16 -layers { "0" "15" "TEMP" "18" "27" "26" "9153S07|06" "GU2_assy|26" "9153S08|07" "9153S09|08" } -nblayers 10
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 49 -shell 49 -face 615 -shape 4234
+checkstatshape res_1 -solid 88 -shell 88 -face 1079 -freewire 0 -freeedge 96 -sharededge 1611
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.00792935897 -avg 8.913893466e-05]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 1
+checkdoc "tpstat c" -max_warns 31 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 20 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 78 -n1 202 -n2 0 -total 280 -withname 178 -withcolor 145 -withlayer 151 -centroid 74 -volume 74 -area 74 -nbcolors 16 -nblayers 10
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 78 -n1 196 -n2 0 -total 274 -withname 178 -withcolor 145 -withlayer 145 -centroid 74 -volume 74 -area 74 -colors { BLUE1 CYAN1 DARKGREEN DARKORANGE1 DEEPPINK2 FIREBRICK FIREBRICK1 GREEN LIGHTGOLDENROD1 MAGENTA1 ORANGE4 PALEGREEN PURPLE RED WHITE YELLOW } -nbcolors 16 -layers { "0" "15" "TEMP" "18" "27" "26" "9153S07|06" "GU2_assy|26" "9153S08|07" "9153S09|08" } -nblayers 10
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 49 -shell 49 -face 615 -shape 4330 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 88 -shell 88 -face 1079 -freewire 0 -freeedge 96 -sharededge 1611 -max_solid 88 -max_shell 88 -max_face 1079 -max_freewire 0 -max_freeedge 96
+checkmaxtol res_2 -tol 0.007650852625 -avg 8.776936133e-05 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
puts "TODO CR23096 ALL: STATSHAPE : Faulty"
-
set filename CTS18541.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 22 ( 0 ) Summary = 22 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 331 ( 6 ) Face = 331 ( 331 ) Summary = 4133 ( 3684 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 331 ( 6 ) Face = 331 ( 331 ) FreeWire = 0 ( 0 ) FreeEdge = 123 ( 123 ) SharedEdge = 1459 ( 1459 )
-TOLERANCE : MaxTol = 0.04894014846 ( 0.04894014846 ) AvgTol = 0.0001169607933 ( 0.0001689666831 )
-LABELS : N0Labels = 3 ( 3 ) N1Labels = 2 ( 2 ) N2Labels = 0 ( 0 ) TotalLabels = 5 ( 5 ) NameLabels = 5 ( 5 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 6 -face 331 -shape 3684
+checkstatshape res_1 -solid 0 -shell 6 -face 331 -freewire 0 -freeedge 123 -sharededge 1459
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.04894014846 -avg 0.0001689666831]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 22 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 331 -face 331 -shape 4133 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 331 -face 331 -freewire 0 -freeedge 123 -sharededge 1459 -max_solid 0 -max_shell 6 -max_face 331 -max_freewire 0 -max_freeedge 123
+checkmaxtol res_2 -tol 0.04894014846 -avg 0.0001169607933 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
puts "TODO CR23096 ALL: STATSHAPE : Faulty"
-
set filename PRO10107.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 83 ( 34 ) Summary = 83 ( 34 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 619 ( 76 ) Face = 619 ( 619 ) Summary = 8060 ( 7347 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 619 ( 76 ) Face = 619 ( 619 ) FreeWire = 0 ( 0 ) FreeEdge = 213 ( 213 ) SharedEdge = 2941 ( 2941 )
-TOLERANCE : MaxTol = 0.08237032966 ( 0.09298535539 ) AvgTol = 0.0004419215919 ( 0.001445750058 )
-LABELS : N0Labels = 5 ( 5 ) N1Labels = 9 ( 9 ) N2Labels = 0 ( 0 ) TotalLabels = 14 ( 14 ) NameLabels = 14 ( 14 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 3 -max_faults 0
+checkdoc "tpstat c" -max_warns 29 -max_faults 0
+checkxstat D_First -n0 5 -n1 9 -n2 0 -total 14 -withname 14 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 76 -face 619 -shape 7347
+checkstatshape res_1 -solid 0 -shell 76 -face 619 -freewire 0 -freeedge 213 -sharededge 2941
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.09298535539 -avg 0.001445750058]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 3 -max_faults 0
+checkdoc "tpstat c" -max_warns 29 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 39 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 5 -n1 9 -n2 0 -total 14 -withname 14 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 5 -n1 9 -n2 0 -total 14 -withname 14 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 619 -face 619 -shape 8060 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 619 -face 619 -freewire 0 -freeedge 213 -sharededge 2941 -max_solid 0 -max_shell 76 -max_face 619 -max_freewire 0 -max_freeedge 213
+checkmaxtol res_2 -tol 0.08237032966 -avg 0.0004419215919 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
puts "TODO CR23096 ALL: STATSHAPE : Faulty"
-
set filename PRO10108.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 17 ( 8 ) Summary = 17 ( 8 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 141 ( 10 ) Face = 141 ( 141 ) Summary = 3556 ( 2958 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 141 ( 10 ) Face = 141 ( 141 ) FreeWire = 0 ( 0 ) FreeEdge = 468 ( 468 ) SharedEdge = 1106 ( 1106 )
-TOLERANCE : MaxTol = 0.02617992696 ( 0.08193326774 ) AvgTol = 4.94626084e-005 ( 0.0004226568167 )
-LABELS : N0Labels = 3 ( 3 ) N1Labels = 2 ( 2 ) N2Labels = 0 ( 0 ) TotalLabels = 5 ( 5 ) NameLabels = 5 ( 5 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 8 -max_faults 0
+checkxstat D_First -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 10 -face 141 -shape 2958
+checkstatshape res_1 -solid 0 -shell 10 -face 141 -freewire 0 -freeedge 468 -sharededge 1106
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.08193326774 -avg 0.0004226568167]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 8 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 13 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 141 -face 141 -shape 3556 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 141 -face 141 -freewire 0 -freeedge 468 -sharededge 1106 -max_solid 0 -max_shell 10 -max_face 141 -max_freewire 0 -max_freeedge 468
+checkmaxtol res_2 -tol 0.02617992696 -avg 4.94626084e-005 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
puts "TODO CR23096 ALL: TOLERANCE : Faulty"
-
set filename trj10_b2-ct-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 52 ( 22 ) Summary = 52 ( 22 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 308 ( 308 ) Summary = 2024 ( 2024 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 308 ( 308 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 850 ( 850 )
-TOLERANCE : MaxTol = 0.00708774003 ( 0.005806659935 ) AvgTol = 0.0003095425146 ( 0.0005353262142 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 1 ( 1 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = WHITE ( WHITE )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 0 ( 0 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 21 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { 0 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 308 -shape 2024
+checkstatshape res_1 -solid 1 -shell 1 -face 308 -freewire 0 -freeedge 0 -sharededge 850
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.005806659935 -avg 0.0005353262142]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 21 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 28 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { 0 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 308 -shape 2024 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 308 -freewire 0 -freeedge 0 -sharededge 850 -max_solid 1 -max_shell 1 -max_face 308 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.00708774003 -avg 0.0003095425146 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: STATSHAPE : Faulty"
-
set filename welle_surface.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 392 ( 384 ) Summary = 392 ( 384 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 469 ( 0 ) Face = 469 ( 469 ) Summary = 5735 ( 5266 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 469 ( 0 ) Face = 469 ( 469 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 2160 ( 2160 )
-TOLERANCE : MaxTol = 0.003303397777 ( 0.007504420009 ) AvgTol = 0.0002306033612 ( 0.0009643387762 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 384 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 469 -shape 5266
+checkstatshape res_1 -solid 0 -shell 0 -face 469 -freewire 0 -freeedge 0 -sharededge 2160
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.007504420009 -avg 0.0009643387762]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 384 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 248 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 469 -face 469 -shape 5735 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 469 -face 469 -freewire 0 -freeedge 0 -sharededge 2160 -max_solid 0 -max_shell 0 -max_face 469 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.003303397777 -avg 0.0002306033612 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename trj12_b3-tu-203.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 67 ) Summary = 0 ( 67 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 696 ( 696 ) Summary = 6794 ( 6252 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 696 ( 696 ) FreeWire = 0 ( 0 ) FreeEdge = 541 ( 541 ) SharedEdge = 2479 ( 2479 )
-TOLERANCE : MaxTol = 0.03072519149 ( 0.3955576531 ) AvgTol = 0.001220761433 ( 0.003949950917 )
-LABELS : N0Labels = 3 ( 3 ) N1Labels = 543 ( 548 ) N2Labels = 0 ( 0 ) TotalLabels = 546 ( 551 ) NameLabels = 5 ( 5 ) ColorLabels = 542 ( 394 ) LayerLabels = 542 ( 547 )
-PROPS : Centroid = 2 ( 2 ) Volume = 2 ( 2 ) Area = 2 ( 2 )
-NCOLORS : NColors = 9 ( 9 )
-COLORS : Colors = CADETBLUE3 GOLDENROD3 HOTPINK3 LIGHTPINK3 MEDIUMSEAGREEN OLIVEDRAB4 STEELBLUE3 WHITE YELLOW ( CADETBLUE3 GOLDENROD3 HOTPINK3 LIGHTPINK3 MEDIUMSEAGREEN OLIVEDRAB4 STEELBLUE3 WHITE YELLOW )
-NLAYERS : NLayers = 21 ( 21 )
-LAYERS : Layers = 001 011 012 013 014 015 016 017 018 019 020 021 022 023 024 026 027 028 029 031 051 ( 001 011 012 013 014 015 016 017 018 019 020 021 022 023 024 026 027 028 029 031 051 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 67 -max_faults 0
+checkxstat D_First -n0 3 -n1 548 -n2 0 -total 551 -withname 5 -withcolor 394 -withlayer 547 -centroid 2 -volume 2 -area 2 -colors { CADETBLUE3 GOLDENROD3 HOTPINK3 LIGHTPINK3 MEDIUMSEAGREEN OLIVEDRAB4 STEELBLUE3 WHITE YELLOW } -nbcolors 9 -layers { 001 011 012 013 014 015 016 017 018 019 020 021 022 023 024 026 027 028 029 031 051 } -nblayers 21
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 696 -shape 6252
+checkstatshape res_1 -solid 1 -shell 1 -face 696 -freewire 0 -freeedge 541 -sharededge 2479
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.3955576531 -avg 0.003949950917]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 67 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3 -n1 548 -n2 0 -total 551 -withname 5 -withcolor 394 -withlayer 547 -centroid 2 -volume 2 -area 2 -nbcolors 9 -nblayers 21
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 543 -n2 0 -total 546 -withname 5 -withcolor 542 -withlayer 542 -centroid 2 -volume 2 -area 2 -colors { CADETBLUE3 GOLDENROD3 HOTPINK3 LIGHTPINK3 MEDIUMSEAGREEN OLIVEDRAB4 STEELBLUE3 WHITE YELLOW } -nbcolors 9 -layers { 001 011 012 013 014 015 016 017 018 019 020 021 022 023 024 026 027 028 029 031 051 } -nblayers 21
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 696 -shape 6794 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 696 -freewire 0 -freeedge 541 -sharededge 2479 -max_solid 1 -max_shell 1 -max_face 696 -max_freewire 0 -max_freeedge 541
+checkmaxtol res_2 -tol 0.03072519149 -avg 0.001220761433 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: CHECKSHAPE : Faulty"
-
set filename trj10_b2-sy-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 16 ( 364 ) Summary = 16 ( 364 )
-CHECKSHAPE : Wires = 1 ( 0 ) Faces = 1 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 257 ( 257 ) Summary = 1770 ( 1770 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 257 ( 257 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 746 ( 746 )
-TOLERANCE : MaxTol = 0.477874439 ( 3.60548709 ) AvgTol = 0.005726825988 ( 0.01506499669 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = LIGHTSTEELBLUE1 ( LIGHTSTEELBLUE1 )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 353 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { LIGHTSTEELBLUE1 } -nbcolors 1 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 257 -shape 1770
+checkstatshape res_1 -solid 1 -shell 1 -face 257 -freewire 0 -freeedge 0 -sharededge 746
+set max_tol_res_1 [checkmaxtol res_1 -tol 3.60548709 -avg 0.01506499669]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 353 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 16 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { LIGHTSTEELBLUE1 } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 1 -max_faces 1 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 257 -shape 1770 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 257 -freewire 0 -freeedge 0 -sharededge 746 -max_solid 1 -max_shell 1 -max_face 257 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.477874439 -avg 0.005726825988 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
set filename PRO20364.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 120 ( 100 ) Summary = 120 ( 100 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 1 ( 1 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 3 ( 3 ) Shell = 4 ( 4 ) Face = 457 ( 457 ) Summary = 2948 ( 2947 )
-STATSHAPE : Solid = 3 ( 3 ) Shell = 4 ( 4 ) Face = 457 ( 457 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 1203 ( 1203 )
-TOLERANCE : MaxTol = 0.005476437308 ( 0.009836983218 ) AvgTol = 0.0003494138018 ( 0.0006808429815 )
-LABELS : N0Labels = 6 ( 6 ) N1Labels = 5 ( 7 ) N2Labels = 0 ( 2 ) TotalLabels = 11 ( 15 ) NameLabels = 11 ( 11 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 102 -max_faults 0
+checkxstat D_First -n0 6 -n1 7 -n2 2 -total 15 -withname 11 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 1 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 3 -shell 4 -face 457 -shape 2947
+checkstatshape res_1 -solid 3 -shell 4 -face 457 -freewire 0 -freeedge 0 -sharededge 1203
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.009836983218 -avg 0.0006808429815]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 102 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 99 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 6 -n1 7 -n2 2 -total 15 -withname 11 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 6 -n1 5 -n2 0 -total 11 -withname 11 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 1 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 1 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 3 -shell 4 -face 457 -shape 2948 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 3 -shell 4 -face 457 -freewire 0 -freeedge 0 -sharededge 1203 -max_solid 3 -max_shell 4 -max_face 457 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.005476437308 -avg 0.0003494138018 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
-
set filename trj9_b2-id-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 47 ( 49 ) Summary = 47 ( 49 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 1 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 3 ( 3 ) Face = 231 ( 231 ) Summary = 1450 ( 1449 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 3 ( 3 ) Face = 231 ( 231 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 594 ( 594 )
-TOLERANCE : MaxTol = 0.0061882807 ( 0.009178817508 ) AvgTol = 0.0004704441275 ( 0.0007231965608 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 1 ( 1 ) Volume = 1 ( 1 ) Area = 1 ( 1 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = GRAY65 ( GRAY65 )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 50 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 1 -volume 1 -area 1 -colors { GRAY65 } -nbcolors 1 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 3 -face 231 -shape 1449
+checkstatshape res_1 -solid 1 -shell 3 -face 231 -freewire 0 -freeedge 0 -sharededge 594
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.009178817508 -avg 0.0007231965608]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 50 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 45 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 1 -volume 1 -area 1 -nbcolors 1 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 1 -volume 1 -area 1 -colors { GRAY65 } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 1 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 3 -face 231 -shape 1450 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 3 -face 231 -freewire 0 -freeedge 0 -sharededge 594 -max_solid 1 -max_shell 3 -max_face 231 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.0061882807 -avg 0.0004704441275 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
set filename PRO8843.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 3 ( 0 ) Warnings = 10 ( 32 ) Summary = 13 ( 32 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 25 ( 25 ) Shell = 45 ( 45 ) Face = 198 ( 198 ) Summary = 1343 ( 1343 )
-STATSHAPE : Solid = 25 ( 25 ) Shell = 45 ( 45 ) Face = 198 ( 198 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 496 ( 496 )
-TOLERANCE : MaxTol = 0.02054327471 ( 0.0293421074 ) AvgTol = 0.0005819945737 ( 0.001390253412 )
-LABELS : N0Labels = 3 ( 3 ) N1Labels = 67 ( 67 ) N2Labels = 0 ( 0 ) TotalLabels = 70 ( 70 ) NameLabels = 5 ( 5 ) ColorLabels = 45 ( 45 ) LayerLabels = 45 ( 45 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = GREEN ROYALBLUE ( GREEN ROYALBLUE )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = X ( X )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 32 -max_faults 0
+checkxstat D_First -n0 3 -n1 67 -n2 0 -total 70 -withname 5 -withcolor 45 -withlayer 45 -centroid 0 -volume 0 -area 0 -colors { GREEN ROYALBLUE } -nbcolors 2 -layers { X } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 25 -shell 45 -face 198 -shape 1343
+checkstatshape res_1 -solid 25 -shell 45 -face 198 -freewire 0 -freeedge 0 -sharededge 496
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.0293421074 -avg 0.001390253412]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 32 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 10 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3 -n1 67 -n2 0 -total 70 -withname 5 -withcolor 45 -withlayer 45 -centroid 0 -volume 0 -area 0 -nbcolors 2 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 67 -n2 0 -total 70 -withname 5 -withcolor 45 -withlayer 45 -centroid 0 -volume 0 -area 0 -colors { GREEN ROYALBLUE } -nbcolors 2 -layers { X } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 25 -shell 45 -face 198 -shape 1343 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 25 -shell 45 -face 198 -freewire 0 -freeedge 0 -sharededge 496 -max_solid 25 -max_shell 45 -max_face 198 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.02054327471 -avg 0.0005819945737 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: STATSHAPE : Faulty"
-
set filename PRO9233.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 11 ( 11 ) Summary = 11 ( 11 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 9 ( 2 ) Face = 210 ( 210 ) Summary = 1631 ( 1598 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 9 ( 2 ) Face = 210 ( 210 ) FreeWire = 0 ( 0 ) FreeEdge = 26 ( 26 ) SharedEdge = 677 ( 677 )
-TOLERANCE : MaxTol = 0.0377578426 ( 0.09627168289 ) AvgTol = 0.003150471765 ( 0.01084852352 )
-LABELS : N0Labels = 4 ( 4 ) N1Labels = 32 ( 32 ) N2Labels = 0 ( 0 ) TotalLabels = 36 ( 36 ) NameLabels = 7 ( 7 ) ColorLabels = 5 ( 5 ) LayerLabels = 26 ( 26 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 3 ( 3 )
-COLORS : Colors = BLUE2 DEEPPINK2 YELLOW2 ( BLUE2 DEEPPINK2 YELLOW2 )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = Invisible ( Invisible )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 11 -max_faults 0
+checkxstat D_First -n0 4 -n1 32 -n2 0 -total 36 -withname 7 -withcolor 5 -withlayer 26 -centroid 0 -volume 0 -area 0 -colors { BLUE2 DEEPPINK2 YELLOW2 } -nbcolors 3 -layers { Invisible } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 2 -face 210 -shape 1598
+checkstatshape res_1 -solid 1 -shell 2 -face 210 -freewire 0 -freeedge 26 -sharededge 677
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.09627168289 -avg 0.01084852352]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 11 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 11 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 4 -n1 32 -n2 0 -total 36 -withname 7 -withcolor 5 -withlayer 26 -centroid 0 -volume 0 -area 0 -nbcolors 3 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 4 -n1 32 -n2 0 -total 36 -withname 7 -withcolor 5 -withlayer 26 -centroid 0 -volume 0 -area 0 -colors { BLUE2 DEEPPINK2 YELLOW2 } -nbcolors 3 -layers { Invisible } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 9 -face 210 -shape 1631 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 9 -face 210 -freewire 0 -freeedge 26 -sharededge 677 -max_solid 1 -max_shell 2 -max_face 210 -max_freewire 0 -max_freeedge 26
+checkmaxtol res_2 -tol 0.0377578426 -avg 0.003150471765 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
puts "TODO CR23096 ALL: TOLERANCE : Faulty"
-
set filename trj9_b2-ct-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 48 ( 37 ) Summary = 48 ( 37 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 308 ( 308 ) Summary = 2025 ( 2024 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 308 ( 308 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 851 ( 850 )
-TOLERANCE : MaxTol = 0.007289138208 ( 0.006752076563 ) AvgTol = 0.0002303853755 ( 0.0002259178002 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 1 ( 1 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = WHITE ( WHITE )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 0 ( 0 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 39 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { 0 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 308 -shape 2024
+checkstatshape res_1 -solid 1 -shell 1 -face 308 -freewire 0 -freeedge 0 -sharededge 850
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.006752076563 -avg 0.0002259178002]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 39 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 47 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { 0 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 308 -shape 2025 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 308 -freewire 0 -freeedge 0 -sharededge 851 -max_solid 1 -max_shell 1 -max_face 308 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.007289138208 -avg 0.0002303853755 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename TUBE.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 38 ( 52 ) Summary = 38 ( 52 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 29 ( 29 ) Shell = 29 ( 29 ) Face = 656 ( 656 ) Summary = 4410 ( 4320 )
-STATSHAPE : Solid = 91 ( 91 ) Shell = 91 ( 91 ) Face = 2181 ( 2181 ) FreeWire = 0 ( 0 ) FreeEdge = 180 ( 180 ) SharedEdge = 1715 ( 1715 )
-TOLERANCE : MaxTol = 0.0002458755248 ( 0.0002458755245 ) AvgTol = 6.914949323e-006 ( 6.914949866e-006 )
-LABELS : N0Labels = 53 ( 53 ) N1Labels = 114 ( 137 ) N2Labels = 0 ( 23 ) TotalLabels = 167 ( 213 ) NameLabels = 167 ( 168 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 52 -max_faults 0
+checkxstat D_First -n0 53 -n1 137 -n2 23 -total 213 -withname 168 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 29 -shell 29 -face 656 -shape 4320
+checkstatshape res_1 -solid 91 -shell 91 -face 2181 -freewire 0 -freeedge 180 -sharededge 1715
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.0002458755245 -avg 6.914949866e-006]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 52 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 38 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 53 -n1 137 -n2 23 -total 213 -withname 168 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 53 -n1 114 -n2 0 -total 167 -withname 167 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 29 -shell 29 -face 656 -shape 4410 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 91 -shell 91 -face 2181 -freewire 0 -freeedge 180 -sharededge 1715 -max_solid 91 -max_shell 91 -max_face 2181 -max_freewire 0 -max_freeedge 180
+checkmaxtol res_2 -tol 0.0002458755248 -avg 6.914949323e-006 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename trj3_pm1-ac2-203.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 22 ( 22 ) Summary = 22 ( 22 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 20 ( 20 ) Shell = 20 ( 20 ) Face = 506 ( 506 ) Summary = 2949 ( 2949 )
-STATSHAPE : Solid = 20 ( 20 ) Shell = 20 ( 20 ) Face = 506 ( 506 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 1160 ( 1160 )
-TOLERANCE : MaxTol = 0.0001499500712 ( 0.000149950072 ) AvgTol = 2.5032118e-006 ( 2.503211837e-006 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 1 ) N2Labels = 0 ( 1 ) TotalLabels = 1 ( 3 ) NameLabels = 1 ( 2 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 22 -max_faults 0
+checkxstat D_First -n0 1 -n1 1 -n2 1 -total 3 -withname 2 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 20 -shell 20 -face 506 -shape 2949
+checkstatshape res_1 -solid 20 -shell 20 -face 506 -freewire 0 -freeedge 0 -sharededge 1160
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.000149950072 -avg 2.503211837e-006]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 22 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 22 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 1 -n2 1 -total 3 -withname 2 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 20 -shell 20 -face 506 -shape 2949 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 20 -shell 20 -face 506 -freewire 0 -freeedge 0 -sharededge 1160 -max_solid 20 -max_shell 20 -max_face 506 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.0001499500712 -avg 2.5032118e-006 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename trj9_pm7-ct-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 14 ( 14 ) Shell = 14 ( 14 ) Face = 396 ( 396 ) Summary = 2537 ( 2537 )
-STATSHAPE : Solid = 14 ( 14 ) Shell = 14 ( 14 ) Face = 396 ( 396 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 1010 ( 1010 )
-TOLERANCE : MaxTol = 0.0006172563958 ( 0.0006172563958 ) AvgTol = 1.062108799e-005 ( 1.0621088e-005 )
-LABELS : N0Labels = 15 ( 15 ) N1Labels = 14 ( 15 ) N2Labels = 0 ( 1 ) TotalLabels = 29 ( 31 ) NameLabels = 29 ( 29 ) ColorLabels = 14 ( 14 ) LayerLabels = 14 ( 14 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 7 ( 7 )
-COLORS : Colors = AQUAMARINE2 BROWN1 DARKSEAGREEN2 OLIVEDRAB2 ORCHID1 ROYALBLUE2 SLATEBLUE2 ( AQUAMARINE2 BROWN1 DARKSEAGREEN2 OLIVEDRAB2 ORCHID1 ROYALBLUE2 SLATEBLUE2 )
-NLAYERS : NLayers = 7 ( 7 )
-LAYERS : Layers = 101 102 103 104 105 106 107 ( 101 102 103 104 105 106 107 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 15 -n1 15 -n2 1 -total 31 -withname 29 -withcolor 14 -withlayer 14 -centroid 0 -volume 0 -area 0 -colors { AQUAMARINE2 BROWN1 DARKSEAGREEN2 OLIVEDRAB2 ORCHID1 ROYALBLUE2 SLATEBLUE2 } -nbcolors 7 -layers { 101 102 103 104 105 106 107 } -nblayers 7
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 14 -shell 14 -face 396 -shape 2537
+checkstatshape res_1 -solid 14 -shell 14 -face 396 -freewire 0 -freeedge 0 -sharededge 1010
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.0006172563958 -avg 1.0621088e-005]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 15 -n1 15 -n2 1 -total 31 -withname 29 -withcolor 14 -withlayer 14 -centroid 0 -volume 0 -area 0 -nbcolors 7 -nblayers 7
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 15 -n1 14 -n2 0 -total 29 -withname 29 -withcolor 14 -withlayer 14 -centroid 0 -volume 0 -area 0 -colors { AQUAMARINE2 BROWN1 DARKSEAGREEN2 OLIVEDRAB2 ORCHID1 ROYALBLUE2 SLATEBLUE2 } -nbcolors 7 -layers { 101 102 103 104 105 106 107 } -nblayers 7
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 14 -shell 14 -face 396 -shape 2537 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 14 -shell 14 -face 396 -freewire 0 -freeedge 0 -sharededge 1010 -max_solid 14 -max_shell 14 -max_face 396 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.0006172563958 -avg 1.062108799e-005 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: STATSHAPE : Faulty"
-
set filename trj4_k1_geo-ac-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 31 ( 35 ) Summary = 31 ( 35 )
-CHECKSHAPE : Wires = 0 ( 2 ) Faces = 0 ( 2 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 60 ( 0 ) Face = 60 ( 60 ) Summary = 768 ( 706 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 60 ( 0 ) Face = 60 ( 60 ) FreeWire = 0 ( 0 ) FreeEdge = 2 ( 2 ) SharedEdge = 288 ( 288 )
-TOLERANCE : MaxTol = 0.0003019310697 ( 0.009909450702 ) AvgTol = 9.663091319e-006 ( 0.0001746106215 )
-LABELS : N0Labels = 3 ( 3 ) N1Labels = 64 ( 64 ) N2Labels = 0 ( 0 ) TotalLabels = 67 ( 67 ) NameLabels = 5 ( 5 ) ColorLabels = 62 ( 62 ) LayerLabels = 62 ( 62 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 1 ( 1 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = CYAN1 YELLOW4 ( CYAN1 YELLOW4 )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 0 ( 0 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 35 -max_faults 0
+checkxstat D_First -n0 3 -n1 64 -n2 0 -total 67 -withname 5 -withcolor 62 -withlayer 62 -centroid 0 -volume 0 -area 1 -colors { CYAN1 YELLOW4 } -nbcolors 2 -layers { 0 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 2 -max_faces 2 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 60 -shape 706
+checkstatshape res_1 -solid 0 -shell 0 -face 60 -freewire 0 -freeedge 2 -sharededge 288
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.009909450702 -avg 0.0001746106215]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 35 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 33 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3 -n1 64 -n2 0 -total 67 -withname 5 -withcolor 62 -withlayer 62 -centroid 0 -volume 0 -area 1 -nbcolors 2 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 64 -n2 0 -total 67 -withname 5 -withcolor 62 -withlayer 62 -centroid 0 -volume 0 -area 1 -colors { CYAN1 YELLOW4 } -nbcolors 2 -layers { 0 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 2 -max_faces 2 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 60 -face 60 -shape 768 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 60 -face 60 -freewire 0 -freeedge 2 -sharededge 288 -max_solid 0 -max_shell 0 -max_face 60 -max_freewire 0 -max_freeedge 2
+checkmaxtol res_2 -tol 0.0003019310697 -avg 9.663091319e-006 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: STATSHAPE : Faulty"
-
set filename r0101_al.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 11 ( 11 ) Summary = 11 ( 11 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 9 ( 2 ) Face = 210 ( 210 ) Summary = 1630 ( 1598 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 9 ( 2 ) Face = 210 ( 210 ) FreeWire = 0 ( 0 ) FreeEdge = 26 ( 26 ) SharedEdge = 677 ( 677 )
-TOLERANCE : MaxTol = 0.03020760843 ( 0.09627168289 ) AvgTol = 0.00257577559 ( 0.01084852352 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 31 ( 31 ) N2Labels = 0 ( 0 ) TotalLabels = 32 ( 32 ) NameLabels = 1 ( 1 ) ColorLabels = 5 ( 5 ) LayerLabels = 26 ( 26 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 3 ( 3 )
-COLORS : Colors = BLUE2 DEEPPINK2 YELLOW2 ( BLUE2 DEEPPINK2 YELLOW2 )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = Invisible ( Invisible )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 11 -max_faults 0
+checkxstat D_First -n0 1 -n1 31 -n2 0 -total 32 -withname 1 -withcolor 5 -withlayer 26 -centroid 0 -volume 0 -area 0 -colors { BLUE2 DEEPPINK2 YELLOW2 } -nbcolors 3 -layers { Invisible } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 2 -face 210 -shape 1598
+checkstatshape res_1 -solid 1 -shell 2 -face 210 -freewire 0 -freeedge 26 -sharededge 677
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.09627168289 -avg 0.01084852352]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 11 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 11 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 31 -n2 0 -total 32 -withname 1 -withcolor 5 -withlayer 26 -centroid 0 -volume 0 -area 0 -nbcolors 3 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 31 -n2 0 -total 32 -withname 1 -withcolor 5 -withlayer 26 -centroid 0 -volume 0 -area 0 -colors { BLUE2 DEEPPINK2 YELLOW2 } -nbcolors 3 -layers { Invisible } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 9 -face 210 -shape 1630 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 9 -face 210 -freewire 0 -freeedge 26 -sharededge 677 -max_solid 1 -max_shell 2 -max_face 210 -max_freewire 0 -max_freeedge 26
+checkmaxtol res_2 -tol 0.03020760843 -avg 0.00257577559 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename r0401_sd.stp
-set ref_data {
-DATA : Faulties = 0 ( 740 ) Warnings = 0 ( 0 ) Summary = 0 ( 740 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 2 ( 2 ) Shell = 4 ( 4 ) Face = 234 ( 234 ) Summary = 2951 ( 2581 )
-STATSHAPE : Solid = 2 ( 2 ) Shell = 4 ( 4 ) Face = 234 ( 234 ) FreeWire = 0 ( 0 ) FreeEdge = 370 ( 370 ) SharedEdge = 957 ( 957 )
-TOLERANCE : MaxTol = 7.686750629e-07 ( 7.686674478e-07 ) AvgTol = 1.10062468e-07 ( 1.100624453e-07 )
-LABELS : N0Labels = 5 ( 5 ) N1Labels = 385 ( 15 ) N2Labels = 0 ( 0 ) TotalLabels = 390 ( 20 ) NameLabels = 9 ( 9 ) ColorLabels = 384 ( 15 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 6 ( 6 )
-COLORS : Colors = FORESTGREEN MATRAGRAY MEDIUMTURQUOISE PALEGREEN1 PURPLE1 RED ( FORESTGREEN MATRAGRAY MEDIUMTURQUOISE PALEGREEN1 PURPLE1 RED )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 740
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 5 -n1 15 -n2 0 -total 20 -withname 9 -withcolor 15 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { FORESTGREEN MATRAGRAY MEDIUMTURQUOISE PALEGREEN1 PURPLE1 RED } -nbcolors 6 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 2 -shell 4 -face 234 -shape 2581
+checkstatshape res_1 -solid 2 -shell 4 -face 234 -freewire 0 -freeedge 370 -sharededge 957
+set max_tol_res_1 [checkmaxtol res_1 -tol 7.686674478e-07 -avg 1.100624453e-07]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 740
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 5 -n1 15 -n2 0 -total 20 -withname 9 -withcolor 15 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 6 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 5 -n1 385 -n2 0 -total 390 -withname 9 -withcolor 384 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { FORESTGREEN MATRAGRAY MEDIUMTURQUOISE PALEGREEN1 PURPLE1 RED } -nbcolors 6 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 2 -shell 4 -face 234 -shape 2951 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 2 -shell 4 -face 234 -freewire 0 -freeedge 370 -sharededge 957 -max_solid 2 -max_shell 4 -max_face 234 -max_freewire 0 -max_freeedge 370
+checkmaxtol res_2 -tol 7.686750629e-07 -avg 1.10062468e-07 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
puts "TODO CR23096 ALL: PROPS : Faulty"
-
set filename trj4_s1-pe-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 2 ( 0 ) Summary = 2 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 8 ( 8 ) Shell = 8 ( 8 ) Face = 146 ( 146 ) Summary = 869 ( 869 )
-STATSHAPE : Solid = 11 ( 11 ) Shell = 11 ( 11 ) Face = 188 ( 188 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 331 ( 331 )
-TOLERANCE : MaxTol = 0.0007596289751 ( 0.0007596289752 ) AvgTol = 1.028305667e-005 ( 1.028305667e-005 )
-LABELS : N0Labels = 13 ( 13 ) N1Labels = 17 ( 17 ) N2Labels = 0 ( 0 ) TotalLabels = 30 ( 30 ) NameLabels = 27 ( 27 ) ColorLabels = 11 ( 11 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 13 ( 27 ) Volume = 13 ( 13 ) Area = 13 ( 13 )
-NCOLORS : NColors = 3 ( 3 )
-COLORS : Colors = BLUE1 RED YELLOW ( BLUE1 RED YELLOW )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 13 -n1 17 -n2 0 -total 30 -withname 27 -withcolor 11 -withlayer 0 -centroid 27 -volume 13 -area 13 -colors { BLUE1 RED YELLOW } -nbcolors 3 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 8 -shell 8 -face 146 -shape 869
+checkstatshape res_1 -solid 11 -shell 11 -face 188 -freewire 0 -freeedge 0 -sharededge 331
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.0007596289752 -avg 1.028305667e-005]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 13 -n1 17 -n2 0 -total 30 -withname 27 -withcolor 11 -withlayer 0 -centroid 27 -volume 13 -area 13 -nbcolors 3 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 13 -n1 17 -n2 0 -total 30 -withname 27 -withcolor 11 -withlayer 0 -centroid 13 -volume 13 -area 13 -colors { BLUE1 RED YELLOW } -nbcolors 3 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 8 -shell 8 -face 146 -shape 869 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 11 -shell 11 -face 188 -freewire 0 -freeedge 0 -sharededge 331 -max_solid 11 -max_shell 11 -max_face 188 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.0007596289751 -avg 1.028305667e-005 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
-set LinuxDiff 3
set filename r_77-sy.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 5 ( 0 ) Warnings = 8 ( 2 ) Summary = 13 ( 2 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 59 ( 59 ) Face = 59 ( 59 ) Summary = 889 ( 889 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 59 ( 59 ) Face = 59 ( 59 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 356 ( 356 )
-TOLERANCE : MaxTol = 0.01782737572 ( 0.03722151184 ) AvgTol = 0.002033692633 ( 0.003517189961 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 118 ( 118 ) N2Labels = 0 ( 0 ) TotalLabels = 119 ( 119 ) NameLabels = 1 ( 1 ) ColorLabels = 59 ( 59 ) LayerLabels = 59 ( 59 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 3 ( 3 )
-COLORS : Colors = GREEN RED TURQUOISE ( GREEN RED TURQUOISE )
-NLAYERS : NLayers = 5 ( 5 )
-LAYERS : Layers = 1 2 3 4 5 ( 1 2 3 4 5 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+checkxstat D_First -n0 1 -n1 118 -n2 0 -total 119 -withname 1 -withcolor 59 -withlayer 59 -centroid 0 -volume 0 -area 0 -colors { GREEN RED TURQUOISE } -nbcolors 3 -layers { 1 2 3 4 5 } -nblayers 5
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 59 -face 59 -shape 889
+checkstatshape res_1 -solid 0 -shell 59 -face 59 -freewire 0 -freeedge 0 -sharededge 356
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.03722151184 -avg 0.003517189961]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 118 -n2 0 -total 119 -withname 1 -withcolor 59 -withlayer 59 -centroid 0 -volume 0 -area 0 -nbcolors 3 -nblayers 5
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 118 -n2 0 -total 119 -withname 1 -withcolor 59 -withlayer 59 -centroid 0 -volume 0 -area 0 -colors { GREEN RED TURQUOISE } -nbcolors 3 -layers { 1 2 3 4 5 } -nblayers 5
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 59 -face 59 -shape 889 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 59 -face 59 -freewire 0 -freeedge 0 -sharededge 356 -max_solid 0 -max_shell 59 -max_face 59 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.01782737572 -avg 0.002033692633 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
-
set filename trj5_pm3-in-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 41 ( 39 ) Summary = 41 ( 39 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 5 ( 5 ) Shell = 5 ( 5 ) Face = 283 ( 283 ) Summary = 1860 ( 1860 )
-STATSHAPE : Solid = 10 ( 10 ) Shell = 10 ( 10 ) Face = 613 ( 613 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 752 ( 752 )
-TOLERANCE : MaxTol = 2.475302665e-007 ( 2.475300807e-007 ) AvgTol = 1.007990614e-007 ( 1.00594269e-007 )
-LABELS : N0Labels = 8 ( 8 ) N1Labels = 12 ( 12 ) N2Labels = 0 ( 0 ) TotalLabels = 20 ( 20 ) NameLabels = 20 ( 20 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 39 -max_faults 0
+checkxstat D_First -n0 8 -n1 12 -n2 0 -total 20 -withname 20 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 5 -shell 5 -face 283 -shape 1860
+checkstatshape res_1 -solid 10 -shell 10 -face 613 -freewire 0 -freeedge 0 -sharededge 752
+set max_tol_res_1 [checkmaxtol res_1 -tol 2.475300807e-007 -avg 1.00594269e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 39 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 41 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 8 -n1 12 -n2 0 -total 20 -withname 20 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 8 -n1 12 -n2 0 -total 20 -withname 20 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 5 -shell 5 -face 283 -shape 1860 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 10 -shell 10 -face 613 -freewire 0 -freeedge 0 -sharededge 752 -max_solid 10 -max_shell 10 -max_face 613 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 2.475302665e-007 -avg 1.007990614e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj5_pm3-ug-203.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 8 ( 82 ) Summary = 8 ( 82 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 18 ( 18 ) Shell = 18 ( 18 ) Face = 376 ( 376 ) Summary = 2466 ( 2466 )
-STATSHAPE : Solid = 18 ( 18 ) Shell = 18 ( 18 ) Face = 376 ( 376 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 955 ( 955 )
-TOLERANCE : MaxTol = 0.005929066011 ( 0.01678547427 ) AvgTol = 9.716431133e-005 ( 0.0001556346626 )
-LABELS : N0Labels = 20 ( 20 ) N1Labels = 19 ( 19 ) N2Labels = 0 ( 0 ) TotalLabels = 39 ( 39 ) NameLabels = 39 ( 39 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 20 ( 20 ) Volume = 20 ( 20 ) Area = 20 ( 20 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 82 -max_faults 0
+checkxstat D_First -n0 20 -n1 19 -n2 0 -total 39 -withname 39 -withcolor 0 -withlayer 0 -centroid 20 -volume 20 -area 20 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 18 -shell 18 -face 376 -shape 2466
+checkstatshape res_1 -solid 18 -shell 18 -face 376 -freewire 0 -freeedge 0 -sharededge 955
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.01678547427 -avg 0.0001556346626]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 82 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 8 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 20 -n1 19 -n2 0 -total 39 -withname 39 -withcolor 0 -withlayer 0 -centroid 20 -volume 20 -area 20 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 20 -n1 19 -n2 0 -total 39 -withname 39 -withcolor 0 -withlayer 0 -centroid 20 -volume 20 -area 20 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 18 -shell 18 -face 376 -shape 2466 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 18 -shell 18 -face 376 -freewire 0 -freeedge 0 -sharededge 955 -max_solid 18 -max_shell 18 -max_face 376 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.005929066011 -avg 9.716431133e-005 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: STATSHAPE : Faulty"
-
set filename bm2_ug_t4-B.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 4 ) Summary = 0 ( 4 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 14 ( 0 ) Face = 14 ( 14 ) Summary = 157 ( 143 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 14 ( 0 ) Face = 14 ( 14 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 56 ( 56 )
-TOLERANCE : MaxTol = 0.0003158426652 ( 0.0003158424638 ) AvgTol = 3.552299744e-005 ( 3.552231384e-005 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 14 -shape 143
+checkstatshape res_1 -solid 0 -shell 0 -face 14 -freewire 0 -freeedge 0 -sharededge 56
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.0003158424638 -avg 3.552231384e-005]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 14 -face 14 -shape 157 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 14 -face 14 -freewire 0 -freeedge 0 -sharededge 56 -max_solid 0 -max_shell 0 -max_face 14 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.0003158426652 -avg 3.552299744e-005 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: STATSHAPE : Faulty"
-
set filename tr10_r0401_al.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 11 ( 11 ) Summary = 11 ( 11 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 9 ( 2 ) Face = 210 ( 210 ) Summary = 1630 ( 1598 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 9 ( 2 ) Face = 210 ( 210 ) FreeWire = 0 ( 0 ) FreeEdge = 26 ( 26 ) SharedEdge = 677 ( 677 )
-TOLERANCE : MaxTol = 0.03020760843 ( 0.09627168289 ) AvgTol = 0.00257577559 ( 0.01084852352 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 31 ( 31 ) N2Labels = 0 ( 0 ) TotalLabels = 32 ( 32 ) NameLabels = 1 ( 1 ) ColorLabels = 5 ( 5 ) LayerLabels = 26 ( 26 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 3 ( 3 )
-COLORS : Colors = BLUE2 DEEPPINK2 YELLOW2 ( BLUE2 DEEPPINK2 YELLOW2 )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = Invisible ( Invisible )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 11 -max_faults 0
+checkxstat D_First -n0 1 -n1 31 -n2 0 -total 32 -withname 1 -withcolor 5 -withlayer 26 -centroid 0 -volume 0 -area 0 -colors { BLUE2 DEEPPINK2 YELLOW2 } -nbcolors 3 -layers { Invisible } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 2 -face 210 -shape 1598
+checkstatshape res_1 -solid 1 -shell 2 -face 210 -freewire 0 -freeedge 26 -sharededge 677
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.09627168289 -avg 0.01084852352]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 11 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 11 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 31 -n2 0 -total 32 -withname 1 -withcolor 5 -withlayer 26 -centroid 0 -volume 0 -area 0 -nbcolors 3 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 31 -n2 0 -total 32 -withname 1 -withcolor 5 -withlayer 26 -centroid 0 -volume 0 -area 0 -colors { BLUE2 DEEPPINK2 YELLOW2 } -nbcolors 3 -layers { Invisible } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 9 -face 210 -shape 1630 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 9 -face 210 -freewire 0 -freeedge 26 -sharededge 677 -max_solid 1 -max_shell 2 -max_face 210 -max_freewire 0 -max_freeedge 26
+checkmaxtol res_2 -tol 0.03020760843 -avg 0.00257577559 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: STATSHAPE : Faulty"
-
set filename bm4_ac_punch.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 37 ( 41 ) Summary = 37 ( 41 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 3 ( 3 ) Shell = 12 ( 3 ) Face = 196 ( 196 ) Summary = 1463 ( 1449 )
-STATSHAPE : Solid = 3 ( 3 ) Shell = 12 ( 3 ) Face = 196 ( 196 ) FreeWire = 0 ( 0 ) FreeEdge = 5 ( 5 ) SharedEdge = 592 ( 592 )
-TOLERANCE : MaxTol = 0.007471806745 ( 0.007471806744 ) AvgTol = 2.491824872e-005 ( 2.491830323e-005 )
-LABELS : N0Labels = 6 ( 6 ) N1Labels = 19 ( 19 ) N2Labels = 0 ( 0 ) TotalLabels = 25 ( 25 ) NameLabels = 11 ( 11 ) ColorLabels = 17 ( 17 ) LayerLabels = 17 ( 17 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 3 ( 3 )
-COLORS : Colors = BLUE1 GREEN RED ( BLUE1 GREEN RED )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 0 ( 0 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 41 -max_faults 0
+checkxstat D_First -n0 6 -n1 19 -n2 0 -total 25 -withname 11 -withcolor 17 -withlayer 17 -centroid 0 -volume 0 -area 0 -colors { BLUE1 GREEN RED } -nbcolors 3 -layers { 0 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 3 -shell 3 -face 196 -shape 1449
+checkstatshape res_1 -solid 3 -shell 3 -face 196 -freewire 0 -freeedge 5 -sharededge 592
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.007471806744 -avg 2.491830323e-005]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 41 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 37 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 6 -n1 19 -n2 0 -total 25 -withname 11 -withcolor 17 -withlayer 17 -centroid 0 -volume 0 -area 0 -nbcolors 3 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 6 -n1 19 -n2 0 -total 25 -withname 11 -withcolor 17 -withlayer 17 -centroid 0 -volume 0 -area 0 -colors { BLUE1 GREEN RED } -nbcolors 3 -layers { 0 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 3 -shell 12 -face 196 -shape 1463 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 3 -shell 12 -face 196 -freewire 0 -freeedge 5 -sharededge 592 -max_solid 3 -max_shell 3 -max_face 196 -max_freewire 0 -max_freeedge 5
+checkmaxtol res_2 -tol 0.007471806745 -avg 2.491824872e-005 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
set filename tr10_r1101_sy.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 5 ( 0 ) Warnings = 0 ( 0 ) Summary = 5 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 64 ( 64 ) Face = 64 ( 64 ) Summary = 759 ( 759 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 64 ( 64 ) Face = 64 ( 64 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 283 ( 283 )
-TOLERANCE : MaxTol = 0.01969059797 ( 0.03822476581 ) AvgTol = 0.001190568033 ( 0.002480845829 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 128 ( 128 ) N2Labels = 0 ( 0 ) TotalLabels = 129 ( 129 ) NameLabels = 1 ( 1 ) ColorLabels = 64 ( 64 ) LayerLabels = 64 ( 64 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = TURQUOISE ( TURQUOISE )
-NLAYERS : NLayers = 2 ( 2 )
-LAYERS : Layers = 4 X ( 4 X )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 128 -n2 0 -total 129 -withname 1 -withcolor 64 -withlayer 64 -centroid 0 -volume 0 -area 0 -colors { TURQUOISE } -nbcolors 1 -layers { 4 X } -nblayers 2
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 64 -face 64 -shape 759
+checkstatshape res_1 -solid 0 -shell 64 -face 64 -freewire 0 -freeedge 0 -sharededge 283
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.03822476581 -avg 0.002480845829]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 128 -n2 0 -total 129 -withname 1 -withcolor 64 -withlayer 64 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 2
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 128 -n2 0 -total 129 -withname 1 -withcolor 64 -withlayer 64 -centroid 0 -volume 0 -area 0 -colors { TURQUOISE } -nbcolors 1 -layers { 4 X } -nblayers 2
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 64 -face 64 -shape 759 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 64 -face 64 -freewire 0 -freeedge 0 -sharededge 283 -max_solid 0 -max_shell 64 -max_face 64 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.01969059797 -avg 0.001190568033 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: STATSHAPE : Faulty"
-
set filename bm4_id_punch_c.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 36 ( 77 ) Summary = 36 ( 77 )
-CHECKSHAPE : Wires = 4 ( 4 ) Faces = 4 ( 4 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 3 ( 3 ) Shell = 40 ( 3 ) Face = 182 ( 182 ) Summary = 1489 ( 1445 )
-STATSHAPE : Solid = 3 ( 3 ) Shell = 40 ( 3 ) Face = 182 ( 182 ) FreeWire = 0 ( 0 ) FreeEdge = 6 ( 6 ) SharedEdge = 586 ( 586 )
-TOLERANCE : MaxTol = 0.007713500664 ( 0.009978407929 ) AvgTol = 0.0007020642139 ( 0.0008074713016 )
-LABELS : N0Labels = 5 ( 5 ) N1Labels = 4 ( 4 ) N2Labels = 0 ( 0 ) TotalLabels = 9 ( 9 ) NameLabels = 9 ( 9 ) ColorLabels = 3 ( 3 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = GREEN RED ( GREEN RED )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 75 -max_faults 0
+checkxstat D_First -n0 5 -n1 4 -n2 0 -total 9 -withname 9 -withcolor 3 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { GREEN RED } -nbcolors 2 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 4 -max_faces 4 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 3 -shell 3 -face 182 -shape 1445
+checkstatshape res_1 -solid 3 -shell 3 -face 182 -freewire 0 -freeedge 6 -sharededge 586
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.009978407929 -avg 0.0008074713016]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 75 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 16 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 5 -n1 4 -n2 0 -total 9 -withname 9 -withcolor 3 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 2 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 5 -n1 4 -n2 0 -total 9 -withname 9 -withcolor 3 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { GREEN RED } -nbcolors 2 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 4 -max_faces 4 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 4 -max_faces 4 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 3 -shell 40 -face 182 -shape 1489 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 3 -shell 40 -face 182 -freewire 0 -freeedge 6 -sharededge 586 -max_solid 3 -max_shell 3 -max_face 182 -max_freewire 0 -max_freeedge 6
+checkmaxtol res_2 -tol 0.007713500664 -avg 0.0007020642139 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: STATSHAPE : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
-set LinuxDiff 4
set filename bm4_id_punch_d.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 28 ( 69 ) Summary = 28 ( 69 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 5 ( 5 ) Shell = 42 ( 5 ) Face = 186 ( 186 ) Summary = 1539 ( 1483 )
-STATSHAPE : Solid = 5 ( 5 ) Shell = 42 ( 5 ) Face = 186 ( 186 ) FreeWire = 0 ( 0 ) FreeEdge = 6 ( 6 ) SharedEdge = 602 ( 602 )
-TOLERANCE : MaxTol = 0.007713500664 ( 0.009978407929 ) AvgTol = 0.0006822328058 ( 0.000967548793 )
-LABELS : N0Labels = 5 ( 5 ) N1Labels = 8 ( 4 ) N2Labels = 0 ( 0 ) TotalLabels = 13 ( 9 ) NameLabels = 9 ( 9 ) ColorLabels = 5 ( 3 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = GREEN RED ( GREEN RED )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 70 -max_faults 0
+checkxstat D_First -n0 5 -n1 4 -n2 0 -total 9 -withname 9 -withcolor 3 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { GREEN RED } -nbcolors 2 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 5 -shell 5 -face 186 -shape 1483
+checkstatshape res_1 -solid 5 -shell 5 -face 186 -freewire 0 -freeedge 6 -sharededge 602
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.009978407929 -avg 0.000967548793]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 70 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 9 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 5 -n1 4 -n2 0 -total 9 -withname 9 -withcolor 3 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 2 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 5 -n1 8 -n2 0 -total 13 -withname 9 -withcolor 5 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { GREEN RED } -nbcolors 2 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 5 -shell 42 -face 186 -shape 1539 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 5 -shell 42 -face 186 -freewire 0 -freeedge 6 -sharededge 602 -max_solid 5 -max_shell 5 -max_face 186 -max_freewire 0 -max_freeedge 6
+checkmaxtol res_2 -tol 0.007713500664 -avg 0.0006822328058 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
puts "TODO CR23096 ALL: LAYERS : Faulty"
set filename bm4_db_punch_a.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 13 ( 2 ) Summary = 13 ( 2 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 3 ( 3 ) Shell = 16 ( 16 ) Face = 192 ( 192 ) Summary = 1314 ( 1270 )
-STATSHAPE : Solid = 3 ( 3 ) Shell = 16 ( 16 ) Face = 192 ( 192 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 519 ( 503 )
-TOLERANCE : MaxTol = 0.152467407 ( 0.344407918 ) AvgTol = 0.0008333756498 ( 0.00561353742 )
-LABELS : N0Labels = 4 ( 4 ) N1Labels = 31 ( 31 ) N2Labels = 0 ( 0 ) TotalLabels = 35 ( 35 ) NameLabels = 7 ( 7 ) ColorLabels = 16 ( 16 ) LayerLabels = 16 ( 19 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 3 ( 3 )
-COLORS : Colors = DODGERBLUE2 GREEN RED ( DODGERBLUE2 GREEN RED )
-NLAYERS : NLayers = 1 ( 2 )
-LAYERS : Layers = 0 ( { 0} 255 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+checkxstat D_First -n0 4 -n1 31 -n2 0 -total 35 -withname 7 -withcolor 16 -withlayer 19 -centroid 0 -volume 0 -area 0 -colors { DODGERBLUE2 GREEN RED } -nbcolors 3 -layers { } -nblayers 2
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 3 -shell 16 -face 192 -shape 1270
+checkstatshape res_1 -solid 3 -shell 16 -face 192 -freewire 0 -freeedge 0 -sharededge 503
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.344407918 -avg 0.00561353742]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 13 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 4 -n1 31 -n2 0 -total 35 -withname 7 -withcolor 16 -withlayer 19 -centroid 0 -volume 0 -area 0 -nbcolors 3 -nblayers 2
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 4 -n1 31 -n2 0 -total 35 -withname 7 -withcolor 16 -withlayer 16 -centroid 0 -volume 0 -area 0 -colors { DODGERBLUE2 GREEN RED } -nbcolors 3 -layers { } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 3 -shell 16 -face 192 -shape 1314 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 3 -shell 16 -face 192 -freewire 0 -freeedge 0 -sharededge 519 -max_solid 3 -max_shell 16 -max_face 192 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.152467407 -avg 0.0008333756498 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
puts "TODO CR23096 ALL: STATSHAPE : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
set filename tr9_r0901-al.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 7 ( 2 ) Summary = 7 ( 2 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 19 ( 1 ) Face = 26 ( 26 ) Summary = 1044 ( 852 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 19 ( 1 ) Face = 26 ( 26 ) FreeWire = 0 ( 0 ) FreeEdge = 177 ( 177 ) SharedEdge = 319 ( 319 )
-TOLERANCE : MaxTol = 0.03657395096 ( 0.9781270945 ) AvgTol = 0.001146170258 ( 0.0151196088 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 196 ( 197 ) N2Labels = 0 ( 0 ) TotalLabels = 197 ( 198 ) NameLabels = 1 ( 1 ) ColorLabels = 19 ( 19 ) LayerLabels = 177 ( 178 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 3 ( 3 )
-COLORS : Colors = BLUE1 RED YELLOW ( BLUE1 RED YELLOW )
-NLAYERS : NLayers = 4 ( 4 )
-LAYERS : Layers = CRVS DATAMS SRFS WHEELS ( CRVS DATAMS SRFS WHEELS )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+checkxstat D_First -n0 1 -n1 197 -n2 0 -total 198 -withname 1 -withcolor 19 -withlayer 178 -centroid 0 -volume 0 -area 0 -colors { BLUE1 RED YELLOW } -nbcolors 3 -layers { CRVS DATAMS SRFS WHEELS } -nblayers 4
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 1 -face 26 -shape 852
+checkstatshape res_1 -solid 0 -shell 1 -face 26 -freewire 0 -freeedge 177 -sharededge 319
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.9781270945 -avg 0.0151196088]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 7 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 197 -n2 0 -total 198 -withname 1 -withcolor 19 -withlayer 178 -centroid 0 -volume 0 -area 0 -nbcolors 3 -nblayers 4
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 196 -n2 0 -total 197 -withname 1 -withcolor 19 -withlayer 177 -centroid 0 -volume 0 -area 0 -colors { BLUE1 RED YELLOW } -nbcolors 3 -layers { CRVS DATAMS SRFS WHEELS } -nblayers 4
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 19 -face 26 -shape 1044 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 19 -face 26 -freewire 0 -freeedge 177 -sharededge 319 -max_solid 0 -max_shell 1 -max_face 26 -max_freewire 0 -max_freeedge 177
+checkmaxtol res_2 -tol 0.03657395096 -avg 0.001146170258 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: STATSHAPE : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename trj7_pm5-ac-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 92 ) Warnings = 0 ( 0 ) Summary = 0 ( 92 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 11 ( 13 ) Summary = 11 ( 13 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 11 ( 11 ) Shell = 12 ( 11 ) Face = 641 ( 641 ) Summary = 4041 ( 4041 )
-STATSHAPE : Solid = 11 ( 11 ) Shell = 12 ( 11 ) Face = 641 ( 641 ) FreeWire = 0 ( 0 ) FreeEdge = 1 ( 1 ) SharedEdge = 1643 ( 1643 )
-TOLERANCE : MaxTol = 1.000100003e-07 ( 1.000100003e-07 ) AvgTol = 1.00004229e-07 ( 1.00004229e-07 )
-LABELS : N0Labels = 20 ( 20 ) N1Labels = 29 ( 30 ) N2Labels = 0 ( 0 ) TotalLabels = 49 ( 50 ) NameLabels = 48 ( 48 ) ColorLabels = 13 ( 13 ) LayerLabels = 13 ( 13 )
-PROPS : Centroid = 17 ( 17 ) Volume = 17 ( 17 ) Area = 17 ( 17 )
-NCOLORS : NColors = 7 ( 7 )
-COLORS : Colors = GRAY22 GRAY73 KHAKI4 MAGENTA1 MATRAGRAY PURPLE4 WHITE ( GRAY22 GRAY73 KHAKI4 MAGENTA1 MATRAGRAY PURPLE4 WHITE )
-NLAYERS : NLayers = 2 ( 2 )
-LAYERS : Layers = 0 1 ( 0 1 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 92
+checkdoc "tpstat c" -max_warns 13 -max_faults 0
+checkxstat D_First -n0 20 -n1 30 -n2 0 -total 50 -withname 48 -withcolor 13 -withlayer 13 -centroid 17 -volume 17 -area 17 -colors { GRAY22 GRAY73 KHAKI4 MAGENTA1 MATRAGRAY PURPLE4 WHITE } -nbcolors 7 -layers { 0 1 } -nblayers 2
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 11 -shell 11 -face 641 -shape 4041
+checkstatshape res_1 -solid 11 -shell 11 -face 641 -freewire 0 -freeedge 1 -sharededge 1643
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-07 -avg 1.00004229e-07]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 92
+checkdoc "tpstat c" -max_warns 13 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 11 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 20 -n1 30 -n2 0 -total 50 -withname 48 -withcolor 13 -withlayer 13 -centroid 17 -volume 17 -area 17 -nbcolors 7 -nblayers 2
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 20 -n1 29 -n2 0 -total 49 -withname 48 -withcolor 13 -withlayer 13 -centroid 17 -volume 17 -area 17 -colors { GRAY22 GRAY73 KHAKI4 MAGENTA1 MATRAGRAY PURPLE4 WHITE } -nbcolors 7 -layers { 0 1 } -nblayers 2
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 11 -shell 12 -face 641 -shape 4041 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 11 -shell 12 -face 641 -freewire 0 -freeedge 1 -sharededge 1643 -max_solid 11 -max_shell 11 -max_face 641 -max_freewire 0 -max_freeedge 1
+checkmaxtol res_2 -tol 1.000100003e-07 -avg 1.00004229e-07 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
puts "TODO CR23096 ALL: LAYERS : Faulty"
-
set filename PRO9234.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 77 ( 181 ) Summary = 77 ( 181 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 2 ( 2 ) Shell = 15 ( 15 ) Face = 280 ( 280 ) Summary = 2349 ( 2212 )
-STATSHAPE : Solid = 2 ( 2 ) Shell = 15 ( 15 ) Face = 280 ( 280 ) FreeWire = 0 ( 1 ) FreeEdge = 137 ( 137 ) SharedEdge = 889 ( 889 )
-TOLERANCE : MaxTol = 0.02408475069 ( 0.03962502303 ) AvgTol = 0.001658839781 ( 0.001904420668 )
-LABELS : N0Labels = 4 ( 4 ) N1Labels = 136 ( 215 ) N2Labels = 0 ( 0 ) TotalLabels = 140 ( 219 ) NameLabels = 7 ( 7 ) ColorLabels = 133 ( 133 ) LayerLabels = 133 ( 212 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 4 ( 4 )
-COLORS : Colors = BLUE1 GREEN LIGHTPINK1 WHITE ( BLUE1 GREEN LIGHTPINK1 WHITE )
-NLAYERS : NLayers = 18 ( 19 )
-LAYERS : Layers = 0 11 12 13 131 14 15 20 200 21 22 30 31 32 33 34 35 36 ( 0 11 12 13 131 14 15 20 200 21 22 30 31 32 33 34 35 36 99 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 180 -max_faults 0
+checkxstat D_First -n0 4 -n1 215 -n2 0 -total 219 -withname 7 -withcolor 133 -withlayer 212 -centroid 0 -volume 0 -area 0 -colors { BLUE1 GREEN LIGHTPINK1 WHITE } -nbcolors 4 -layers { 0 11 12 13 131 14 15 20 200 21 22 30 31 32 33 34 35 36 99 } -nblayers 19
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 2 -shell 15 -face 280 -shape 2212
+checkstatshape res_1 -solid 2 -shell 15 -face 280 -freewire 1 -freeedge 137 -sharededge 889
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.03962502303 -avg 0.001904420668]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 180 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 78 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 4 -n1 215 -n2 0 -total 219 -withname 7 -withcolor 133 -withlayer 212 -centroid 0 -volume 0 -area 0 -nbcolors 4 -nblayers 19
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 4 -n1 136 -n2 0 -total 140 -withname 7 -withcolor 133 -withlayer 133 -centroid 0 -volume 0 -area 0 -colors { BLUE1 GREEN LIGHTPINK1 WHITE } -nbcolors 4 -layers { 0 11 12 13 131 14 15 20 200 21 22 30 31 32 33 34 35 36 } -nblayers 18
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 2 -shell 15 -face 280 -shape 2349 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 2 -shell 15 -face 280 -freewire 0 -freeedge 137 -sharededge 889 -max_solid 2 -max_shell 15 -max_face 280 -max_freewire 1 -max_freeedge 137
+checkmaxtol res_2 -tol 0.02408475069 -avg 0.001658839781 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
puts "TODO CR23096 ALL: PROPS : Faulty"
-
set filename trj8_pm6-ts-203.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 237 ( 262 ) Summary = 237 ( 262 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 16 ( 16 ) Shell = 16 ( 16 ) Face = 494 ( 494 ) Summary = 3399 ( 3353 )
-STATSHAPE : Solid = 26 ( 26 ) Shell = 26 ( 26 ) Face = 874 ( 874 ) FreeWire = 0 ( 0 ) FreeEdge = 58 ( 58 ) SharedEdge = 1179 ( 1179 )
-TOLERANCE : MaxTol = 0.001020031105 ( 0.001020031105 ) AvgTol = 6.80978947e-006 ( 6.80978947e-006 )
-LABELS : N0Labels = 31 ( 31 ) N1Labels = 535 ( 491 ) N2Labels = 0 ( 0 ) TotalLabels = 566 ( 522 ) NameLabels = 62 ( 62 ) ColorLabels = 520 ( 481 ) LayerLabels = 16 ( 16 )
-PROPS : Centroid = 26 ( 43 ) Volume = 26 ( 26 ) Area = 26 ( 26 )
-NCOLORS : NColors = 7 ( 7 )
-COLORS : Colors = DEEPSKYBLUE2 DODGERBLUE2 MAGENTA1 ORANGE ORANGERED RED WHITE ( DEEPSKYBLUE2 DODGERBLUE2 MAGENTA1 ORANGE ORANGERED RED WHITE )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 000 ( 000 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 262 -max_faults 0
+checkxstat D_First -n0 31 -n1 491 -n2 0 -total 522 -withname 62 -withcolor 481 -withlayer 16 -centroid 43 -volume 26 -area 26 -colors { DEEPSKYBLUE2 DODGERBLUE2 MAGENTA1 ORANGE ORANGERED RED WHITE } -nbcolors 7 -layers { 000 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 16 -shell 16 -face 494 -shape 3353
+checkstatshape res_1 -solid 26 -shell 26 -face 874 -freewire 0 -freeedge 58 -sharededge 1179
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.001020031105 -avg 6.80978947e-006]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 262 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 237 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 31 -n1 491 -n2 0 -total 522 -withname 62 -withcolor 481 -withlayer 16 -centroid 43 -volume 26 -area 26 -nbcolors 7 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 31 -n1 535 -n2 0 -total 566 -withname 62 -withcolor 520 -withlayer 16 -centroid 26 -volume 26 -area 26 -colors { DEEPSKYBLUE2 DODGERBLUE2 MAGENTA1 ORANGE ORANGERED RED WHITE } -nbcolors 7 -layers { 000 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 16 -shell 16 -face 494 -shape 3399 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 26 -shell 26 -face 874 -freewire 0 -freeedge 58 -sharededge 1179 -max_solid 26 -max_shell 26 -max_face 874 -max_freewire 0 -max_freeedge 58
+checkmaxtol res_2 -tol 0.001020031105 -avg 6.80978947e-006 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: STATSHAPE : Faulty"
-
set filename trj3_pm1-ct2-203.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 36 ( 27 ) Summary = 36 ( 27 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 7 ( 1 ) Face = 200 ( 200 ) Summary = 1529 ( 1523 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 7 ( 1 ) Face = 200 ( 200 ) FreeWire = 0 ( 44 ) FreeEdge = 44 ( 44 ) SharedEdge = 613 ( 613 )
-TOLERANCE : MaxTol = 0.02902527695 ( 0.09790099556 ) AvgTol = 0.002306346274 ( 0.0102313292 )
-LABELS : N0Labels = 4 ( 4 ) N1Labels = 3 ( 3 ) N2Labels = 0 ( 0 ) TotalLabels = 7 ( 7 ) NameLabels = 7 ( 7 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 30 -max_faults 0
+checkxstat D_First -n0 4 -n1 3 -n2 0 -total 7 -withname 7 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 200 -shape 1523
+checkstatshape res_1 -solid 1 -shell 1 -face 200 -freewire 44 -freeedge 44 -sharededge 613
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.09790099556 -avg 0.0102313292]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 30 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 11 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 4 -n1 3 -n2 0 -total 7 -withname 7 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 4 -n1 3 -n2 0 -total 7 -withname 7 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 7 -face 200 -shape 1529 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 7 -face 200 -freewire 0 -freeedge 44 -sharededge 613 -max_solid 1 -max_shell 1 -max_face 200 -max_freewire 44 -max_freeedge 44
+checkmaxtol res_2 -tol 0.02902527695 -avg 0.002306346274 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
puts "TODO CR23096 ALL: STATSHAPE : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
-set LinuxDiff 3
set filename trj3_s1-al-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 102 ( 95 ) Summary = 102 ( 95 )
-CHECKSHAPE : Wires = 12 ( 12 ) Faces = 12 ( 12 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 5 ( 5 ) Shell = 18 ( 14 ) Face = 94 ( 94 ) Summary = 630 ( 627 )
-STATSHAPE : Solid = 5 ( 5 ) Shell = 18 ( 14 ) Face = 94 ( 94 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 255 ( 255 )
-TOLERANCE : MaxTol = 5.454654424 ( 20.45495409 ) AvgTol = 0.1582231883 ( 0.5075249428 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 18 ( 17 ) N2Labels = 0 ( 0 ) TotalLabels = 19 ( 18 ) NameLabels = 1 ( 1 ) ColorLabels = 18 ( 17 ) LayerLabels = 7 ( 8 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = RED YELLOW ( RED YELLOW )
-NLAYERS : NLayers = 3 ( 3 )
-LAYERS : Layers = feet main_body tail_middle ( feet main_body tail_middle )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 91 -max_faults 0
+checkxstat D_First -n0 1 -n1 17 -n2 0 -total 18 -withname 1 -withcolor 17 -withlayer 8 -centroid 0 -volume 0 -area 0 -colors { RED YELLOW } -nbcolors 2 -layers { "main_body" "tail_middle" "feet" } -nblayers 3
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 12 -max_faces 12 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 5 -shell 14 -face 94 -shape 627
+checkstatshape res_1 -solid 5 -shell 14 -face 94 -freewire 0 -freeedge 0 -sharededge 255
+set max_tol_res_1 [checkmaxtol res_1 -tol 20.45495409 -avg 0.5075249428]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 91 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 101 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 17 -n2 0 -total 18 -withname 1 -withcolor 17 -withlayer 8 -centroid 0 -volume 0 -area 0 -nbcolors 2 -nblayers 3
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 18 -n2 0 -total 19 -withname 1 -withcolor 18 -withlayer 7 -centroid 0 -volume 0 -area 0 -colors { RED YELLOW } -nbcolors 2 -layers { "main_body" "tail_middle" "feet" } -nblayers 3
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 12 -max_faces 12 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 12 -max_faces 12 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 5 -shell 18 -face 94 -shape 630 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 5 -shell 18 -face 94 -freewire 0 -freeedge 0 -sharededge 255 -max_solid 5 -max_shell 14 -max_face 94 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 5.454654424 -avg 0.1582231883 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
puts "TODO CR23096 ALL: NBSHAPES : Faulty"
-set LinuxDiff 3
set filename r76sy.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 1 ( 4 ) Warnings = 68 ( 103 ) Summary = 69 ( 107 )
-CHECKSHAPE : Wires = 1 ( 0 ) Faces = 1 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 23 ( 23 ) Shell = 47 ( 47 ) Face = 194 ( 194 ) Summary = 1350 ( 1357 )
-STATSHAPE : Solid = 23 ( 23 ) Shell = 47 ( 47 ) Face = 194 ( 194 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 502 ( 504 )
-TOLERANCE : MaxTol = 0.0205434719 ( 0.0293421419 ) AvgTol = 0.0005065999101 ( 0.00138068504 )
-LABELS : N0Labels = 3 ( 3 ) N1Labels = 69 ( 67 ) N2Labels = 0 ( 0 ) TotalLabels = 72 ( 70 ) NameLabels = 5 ( 5 ) ColorLabels = 47 ( 45 ) LayerLabels = 43 ( 45 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = GREEN ROYALBLUE ( GREEN ROYALBLUE )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = X ( X )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 103 -max_faults 4
+checkxstat D_First -n0 3 -n1 67 -n2 0 -total 70 -withname 5 -withcolor 45 -withlayer 45 -centroid 0 -volume 0 -area 0 -colors { GREEN ROYALBLUE } -nbcolors 2 -layers { X } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 23 -shell 47 -face 194 -shape 1357
+checkstatshape res_1 -solid 23 -shell 47 -face 194 -freewire 0 -freeedge 0 -sharededge 504
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.0293421419 -avg 0.00138068504]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 103 -max_faults 4
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 71 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3 -n1 67 -n2 0 -total 70 -withname 5 -withcolor 45 -withlayer 45 -centroid 0 -volume 0 -area 0 -nbcolors 2 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 69 -n2 0 -total 72 -withname 5 -withcolor 47 -withlayer 43 -centroid 0 -volume 0 -area 0 -colors { GREEN ROYALBLUE } -nbcolors 2 -layers { X } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 1 -max_faces 1 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 23 -shell 47 -face 194 -shape 1350 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 23 -shell 47 -face 194 -freewire 0 -freeedge 0 -sharededge 502 -max_solid 23 -max_shell 47 -max_face 194 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.0205434719 -avg 0.0005065999101 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
puts "TODO CR23096 ALL: LAYERS : Faulty"
-
set filename bm4_ac_seal.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 16 ( 16 ) Summary = 16 ( 16 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 3 ( 3 ) Face = 466 ( 466 ) Summary = 2557 ( 2557 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 3 ( 3 ) Face = 466 ( 466 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 1032 ( 1032 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1.000100003e-007 ) AvgTol = 1.000037844e-007 ( 1.000037844e-007 )
-LABELS : N0Labels = 3 ( 3 ) N1Labels = 2 ( 3 ) N2Labels = 0 ( 0 ) TotalLabels = 5 ( 6 ) NameLabels = 5 ( 5 ) ColorLabels = 1 ( 1 ) LayerLabels = 1 ( 2 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = WHITE ( WHITE )
-NLAYERS : NLayers = 1 ( 2 )
-LAYERS : Layers = 0 ( 0 23 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 16 -max_faults 0
+checkxstat D_First -n0 3 -n1 3 -n2 0 -total 6 -withname 5 -withcolor 1 -withlayer 2 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { 0 23 } -nblayers 2
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 3 -face 466 -shape 2557
+checkstatshape res_1 -solid 1 -shell 3 -face 466 -freewire 0 -freeedge 0 -sharededge 1032
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-007 -avg 1.000037844e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 16 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 16 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3 -n1 3 -n2 0 -total 6 -withname 5 -withcolor 1 -withlayer 2 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 2
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { 0 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 3 -face 466 -shape 2557 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 3 -face 466 -freewire 0 -freeedge 0 -sharededge 1032 -max_solid 1 -max_shell 3 -max_face 466 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.000037844e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
puts "TODO CR23096 ALL: LAYERS : Faulty"
set filename bm4_db_punch_c.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 26 ( 14 ) Summary = 26 ( 14 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 3 ( 3 ) Shell = 16 ( 16 ) Face = 192 ( 192 ) Summary = 1314 ( 1270 )
-STATSHAPE : Solid = 3 ( 3 ) Shell = 16 ( 16 ) Face = 192 ( 192 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 519 ( 503 )
-TOLERANCE : MaxTol = 0.152467407 ( 0.344407918 ) AvgTol = 0.0008368678776 ( 0.005616743583 )
-LABELS : N0Labels = 4 ( 4 ) N1Labels = 31 ( 31 ) N2Labels = 0 ( 0 ) TotalLabels = 35 ( 35 ) NameLabels = 7 ( 7 ) ColorLabels = 16 ( 16 ) LayerLabels = 16 ( 19 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 3 ( 3 )
-COLORS : Colors = DODGERBLUE2 GREEN RED ( DODGERBLUE2 GREEN RED )
-NLAYERS : NLayers = 1 ( 2 )
-LAYERS : Layers = 0 ( { 0} 255 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 14 -max_faults 0
+checkxstat D_First -n0 4 -n1 31 -n2 0 -total 35 -withname 7 -withcolor 16 -withlayer 19 -centroid 0 -volume 0 -area 0 -colors { DODGERBLUE2 GREEN RED } -nbcolors 3 -layers { 0 23 } -nblayers 2
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 3 -shell 16 -face 192 -shape 1270
+checkstatshape res_1 -solid 3 -shell 16 -face 192 -freewire 0 -freeedge 0 -sharededge 503
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.344407918 -avg 0.005616743583]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 14 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 26 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 4 -n1 31 -n2 0 -total 35 -withname 7 -withcolor 16 -withlayer 19 -centroid 0 -volume 0 -area 0 -nbcolors 3 -nblayers 2
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 4 -n1 31 -n2 0 -total 35 -withname 7 -withcolor 16 -withlayer 16 -centroid 0 -volume 0 -area 0 -colors { DODGERBLUE2 GREEN RED } -nbcolors 3 -layers { 0 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 3 -shell 16 -face 192 -shape 1314 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 3 -shell 16 -face 192 -freewire 0 -freeedge 0 -sharededge 519 -max_solid 3 -max_shell 16 -max_face 192 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.152467407 -avg 0.0008368678776 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
-set LinuxDiff 1
set filename bm4_sd_punch_c.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 6 ) Warnings = 10 ( 6 ) Summary = 10 ( 12 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 3 ( 3 ) Shell = 4 ( 4 ) Face = 198 ( 198 ) Summary = 1355 ( 1355 )
-STATSHAPE : Solid = 3 ( 3 ) Shell = 4 ( 4 ) Face = 198 ( 198 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 554 ( 554 )
-TOLERANCE : MaxTol = 6.149434256e-07 ( 6.149442686e-07 ) AvgTol = 1.401960047e-07 ( 1.401957861e-07 )
-LABELS : N0Labels = 5 ( 5 ) N1Labels = 35 ( 35 ) N2Labels = 0 ( 0 ) TotalLabels = 40 ( 40 ) NameLabels = 9 ( 9 ) ColorLabels = 35 ( 35 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 3 ( 3 )
-COLORS : Colors = BLUE1 GREEN RED ( BLUE1 GREEN RED )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 6 -max_faults 6
+checkxstat D_First -n0 5 -n1 35 -n2 0 -total 40 -withname 9 -withcolor 35 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 GREEN RED } -nbcolors 3 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 3 -shell 4 -face 198 -shape 1355
+checkstatshape res_1 -solid 3 -shell 4 -face 198 -freewire 0 -freeedge 0 -sharededge 554
+set max_tol_res_1 [checkmaxtol res_1 -tol 6.149442686e-07 -avg 1.401957861e-07]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 6 -max_faults 6
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 10 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 5 -n1 35 -n2 0 -total 40 -withname 9 -withcolor 35 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 3 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 5 -n1 35 -n2 0 -total 40 -withname 9 -withcolor 35 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 GREEN RED } -nbcolors 3 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 3 -shell 4 -face 198 -shape 1355 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 3 -shell 4 -face 198 -freewire 0 -freeedge 0 -sharededge 554 -max_solid 3 -max_shell 4 -max_face 198 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 6.149434256e-07 -avg 1.401960047e-07 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
puts "TODO CR23096 ALL: LAYERS : Faulty"
set filename bm4_db_conn_a.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 60 ( 3 ) Shell = 60 ( 3 ) Face = 2526 ( 504 ) Summary = 17140 ( 3803 )
-STATSHAPE : Solid = 114 ( 114 ) Shell = 114 ( 114 ) Face = 4044 ( 4044 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 6988 ( 1556 )
-TOLERANCE : MaxTol = 1.593845682e-007 ( 1.593845682e-007 ) AvgTol = 1.001858532e-007 ( 1.001858532e-007 )
-LABELS : N0Labels = 6 ( 7 ) N1Labels = 31 ( 33 ) N2Labels = 0 ( 0 ) TotalLabels = 37 ( 40 ) NameLabels = 37 ( 36 ) ColorLabels = 3 ( 3 ) LayerLabels = 3 ( 35 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 3 ( 3 )
-COLORS : Colors = CYAN1 WHITE YELLOW ( CYAN1 WHITE YELLOW )
-NLAYERS : NLayers = 3 ( 6 )
-LAYERS : Layers = 1 10 5 ( { 0} { 1} { 5} { 10} 200 255 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 7 -n1 33 -n2 0 -total 40 -withname 36 -withcolor 3 -withlayer 35 -centroid 0 -volume 0 -area 0 -colors { CYAN1 WHITE YELLOW } -nbcolors 3 -layers { } -nblayers 6
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 3 -shell 3 -face 504 -shape 3803
+checkstatshape res_1 -solid 114 -shell 114 -face 4044 -freewire 0 -freeedge 0 -sharededge 1556
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.593845682e-007 -avg 1.001858532e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 7 -n1 33 -n2 0 -total 40 -withname 36 -withcolor 3 -withlayer 35 -centroid 0 -volume 0 -area 0 -nbcolors 3 -nblayers 6
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 6 -n1 31 -n2 0 -total 37 -withname 37 -withcolor 3 -withlayer 3 -centroid 0 -volume 0 -area 0 -colors { CYAN1 WHITE YELLOW } -nbcolors 3 -layers { } -nblayers 3
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 60 -shell 60 -face 2526 -shape 17140 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 114 -shell 114 -face 4044 -freewire 0 -freeedge 0 -sharededge 6988 -max_solid 114 -max_shell 114 -max_face 4044 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.593845682e-007 -avg 1.001858532e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
puts "TODO CR23096 ALL: LAYERS : Faulty"
set filename bm4_db_conn_d.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 16 ( 8 ) Summary = 16 ( 8 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 60 ( 3 ) Shell = 60 ( 3 ) Face = 2526 ( 504 ) Summary = 17140 ( 3803 )
-STATSHAPE : Solid = 114 ( 114 ) Shell = 114 ( 114 ) Face = 4044 ( 4044 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 6988 ( 1556 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1.000100003e-007 ) AvgTol = 1.00009393e-007 ( 1.00009393e-007 )
-LABELS : N0Labels = 6 ( 7 ) N1Labels = 31 ( 33 ) N2Labels = 0 ( 0 ) TotalLabels = 37 ( 40 ) NameLabels = 37 ( 36 ) ColorLabels = 3 ( 3 ) LayerLabels = 3 ( 35 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 3 ( 3 )
-COLORS : Colors = CYAN1 WHITE YELLOW ( CYAN1 WHITE YELLOW )
-NLAYERS : NLayers = 3 ( 6 )
-LAYERS : Layers = 1 10 5 ( { 0} { 1} { 5} { 10} 200 255 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 8 -max_faults 0
+checkxstat D_First -n0 7 -n1 33 -n2 0 -total 40 -withname 36 -withcolor 3 -withlayer 35 -centroid 0 -volume 0 -area 0 -colors { CYAN1 WHITE YELLOW } -nbcolors 3 -layers { } -nblayers 6
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 3 -shell 3 -face 504 -shape 3803
+checkstatshape res_1 -solid 114 -shell 114 -face 4044 -freewire 0 -freeedge 0 -sharededge 1556
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-007 -avg 1.00009393e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 8 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 16 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 7 -n1 33 -n2 0 -total 40 -withname 36 -withcolor 3 -withlayer 35 -centroid 0 -volume 0 -area 0 -nbcolors 3 -nblayers 6
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 6 -n1 31 -n2 0 -total 37 -withname 37 -withcolor 3 -withlayer 3 -centroid 0 -volume 0 -area 0 -colors { CYAN1 WHITE YELLOW } -nbcolors 3 -layers { } -nblayers 3
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 60 -shell 60 -face 2526 -shape 17140 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 114 -shell 114 -face 4044 -freewire 0 -freeedge 0 -sharededge 6988 -max_solid 114 -max_shell 114 -max_face 4044 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.00009393e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
puts "TODO CR23096 ALL: CHECKSHAPE : Faulty"
puts "TODO CR23096 ALL: STATSHAPE : Faulty"
puts "TODO CR23096 ALL: TOLERANCE : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
-set LinuxDiff 3
set filename pe_turbine-A.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 4 ( 1 ) Summary = 4 ( 1 )
-CHECKSHAPE : Wires = 1 ( 0 ) Faces = 1 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 55 ( 54 ) Summary = 329 ( 314 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 55 ( 54 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 139 ( 130 )
-TOLERANCE : MaxTol = 43.63397625 ( 0.004765335881 ) AvgTol = 1.059548993 ( 0.0005744934329 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 53 ( 54 ) N2Labels = 0 ( 0 ) TotalLabels = 54 ( 55 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 53 ( 54 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = *FLAECHEN ( *FLAECHEN )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+checkxstat D_First -n0 1 -n1 54 -n2 0 -total 55 -withname 1 -withcolor 0 -withlayer 54 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { "*FLAECHEN" } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 1 -face 54 -shape 314
+checkstatshape res_1 -solid 0 -shell 1 -face 54 -freewire 0 -freeedge 0 -sharededge 130
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.004765335881 -avg 0.0005744934329]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 54 -n2 0 -total 55 -withname 1 -withcolor 0 -withlayer 54 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 53 -n2 0 -total 54 -withname 1 -withcolor 0 -withlayer 53 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { "*FLAECHEN" } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 1 -max_faces 1 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 1 -face 55 -shape 329 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 1 -face 55 -freewire 0 -freeedge 0 -sharededge 139 -max_solid 0 -max_shell 1 -max_face 54 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 43.63397625 -avg 1.059548993 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
-
set filename BUC60143.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 113 ( 32 ) Summary = 113 ( 32 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 117 ( 117 ) Face = 117 ( 117 ) Summary = 3604 ( 3191 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 117 ( 117 ) Face = 117 ( 117 ) FreeWire = 0 ( 89 ) FreeEdge = 502 ( 502 ) SharedEdge = 1120 ( 1120 )
-TOLERANCE : MaxTol = 0.1067914979 ( 0.1067914979 ) AvgTol = 0.003971306078 ( 0.005635792771 )
-LABELS : N0Labels = 4 ( 4 ) N1Labels = 3 ( 3 ) N2Labels = 0 ( 0 ) TotalLabels = 7 ( 7 ) NameLabels = 7 ( 7 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 31 -max_faults 0
+checkxstat D_First -n0 4 -n1 3 -n2 0 -total 7 -withname 7 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 117 -face 117 -shape 3191
+checkstatshape res_1 -solid 0 -shell 117 -face 117 -freewire 89 -freeedge 502 -sharededge 1120
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.1067914979 -avg 0.005635792771]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 31 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 112 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 4 -n1 3 -n2 0 -total 7 -withname 7 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 4 -n1 3 -n2 0 -total 7 -withname 7 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 117 -face 117 -shape 3604 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 117 -face 117 -freewire 0 -freeedge 502 -sharededge 1120 -max_solid 0 -max_shell 117 -max_face 117 -max_freewire 89 -max_freeedge 502
+checkmaxtol res_2 -tol 0.1067914979 -avg 0.003971306078 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename BUC61003-1.stp
-set ref_data {
-DATA : Faulties = 0 ( 348 ) Warnings = 0 ( 1037 ) Summary = 0 ( 1385 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 472 ( 472 ) Summary = 2616 ( 2616 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 472 ( 472 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 1074 ( 1074 )
-TOLERANCE : MaxTol = 0.0008695832754 ( 0.0008695832758 ) AvgTol = 0.0001317960969 ( 0.0001333745726 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 1037 -max_faults 348
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 472 -shape 2616
+checkstatshape res_1 -solid 1 -shell 1 -face 472 -freewire 0 -freeedge 0 -sharededge 1074
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.0008695832758 -avg 0.0001333745726]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 1037 -max_faults 348
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 472 -shape 2616 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 472 -freewire 0 -freeedge 0 -sharededge 1074 -max_solid 1 -max_shell 1 -max_face 472 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.0008695832754 -avg 0.0001317960969 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename BUC61003-2.stp
-set ref_data {
-DATA : Faulties = 0 ( 12 ) Warnings = 0 ( 29 ) Summary = 0 ( 41 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 30 ( 42 ) Summary = 30 ( 42 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 2 ( 2 ) Shell = 2 ( 2 ) Face = 26 ( 26 ) Summary = 199 ( 199 )
-STATSHAPE : Solid = 2 ( 2 ) Shell = 2 ( 2 ) Face = 26 ( 26 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 80 ( 80 )
-TOLERANCE : MaxTol = 0.03890832401 ( 0.03890832401 ) AvgTol = 0.00559059449 ( 0.005591227372 )
-LABELS : N0Labels = 3 ( 3 ) N1Labels = 2 ( 2 ) N2Labels = 0 ( 0 ) TotalLabels = 5 ( 5 ) NameLabels = 5 ( 5 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 29 -max_faults 12
+checkdoc "tpstat c" -max_warns 42 -max_faults 0
+checkxstat D_First -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 2 -shell 2 -face 26 -shape 199
+checkstatshape res_1 -solid 2 -shell 2 -face 26 -freewire 0 -freeedge 0 -sharededge 80
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.03890832401 -avg 0.005591227372]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 29 -max_faults 12
+checkdoc "tpstat c" -max_warns 42 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 30 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 2 -shell 2 -face 26 -shape 199 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 2 -shell 2 -face 26 -freewire 0 -freeedge 0 -sharededge 80 -max_solid 2 -max_shell 2 -max_face 26 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.03890832401 -avg 0.00559059449 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename CC670-12.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 24 ( 27 ) Summary = 24 ( 27 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 135 ( 135 ) Summary = 1358 ( 1260 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 135 ( 135 ) FreeWire = 0 ( 4 ) FreeEdge = 100 ( 100 ) SharedEdge = 464 ( 464 )
-TOLERANCE : MaxTol = 0.04505895972 ( 0.09572273863 ) AvgTol = 0.005281217499 ( 0.01244848052 )
-LABELS : N0Labels = 5 ( 5 ) N1Labels = 3 ( 3 ) N2Labels = 0 ( 0 ) TotalLabels = 8 ( 8 ) NameLabels = 8 ( 8 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 28 -max_faults 0
+checkxstat D_First -n0 5 -n1 3 -n2 0 -total 8 -withname 8 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 135 -shape 1260
+checkstatshape res_1 -solid 1 -shell 1 -face 135 -freewire 4 -freeedge 100 -sharededge 464
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.09572273863 -avg 0.01244848052]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 28 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 5 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 5 -n1 3 -n2 0 -total 8 -withname 8 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 5 -n1 3 -n2 0 -total 8 -withname 8 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 135 -shape 1358 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 135 -freewire 0 -freeedge 100 -sharededge 464 -max_solid 1 -max_shell 1 -max_face 135 -max_freewire 4 -max_freeedge 100
+checkmaxtol res_2 -tol 0.04505895972 -avg 0.005281217499 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
-
set filename CC670-12608.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 35 ( 21 ) Summary = 35 ( 21 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 126 ( 126 ) Summary = 1309 ( 1222 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 126 ( 126 ) FreeWire = 0 ( 8 ) FreeEdge = 94 ( 94 ) SharedEdge = 449 ( 449 )
-TOLERANCE : MaxTol = 0.02385233045 ( 0.09640334764 ) AvgTol = 0.002320875309 ( 0.01039707001 )
-LABELS : N0Labels = 5 ( 5 ) N1Labels = 3 ( 3 ) N2Labels = 0 ( 0 ) TotalLabels = 8 ( 8 ) NameLabels = 8 ( 8 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 23 -max_faults 0
+checkxstat D_First -n0 5 -n1 3 -n2 0 -total 8 -withname 8 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 126 -shape 1222
+checkstatshape res_1 -solid 1 -shell 1 -face 126 -freewire 8 -freeedge 94 -sharededge 449
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.09640334764 -avg 0.01039707001]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 23 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 3 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 5 -n1 3 -n2 0 -total 8 -withname 8 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 5 -n1 3 -n2 0 -total 8 -withname 8 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 126 -shape 1309 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 126 -freewire 0 -freeedge 94 -sharededge 449 -max_solid 1 -max_shell 1 -max_face 126 -max_freewire 8 -max_freeedge 94
+checkmaxtol res_2 -tol 0.02385233045 -avg 0.002320875309 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename CC670-12613.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 16 ( 16 ) Summary = 16 ( 16 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 102 ( 102 ) Summary = 1024 ( 967 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 102 ( 102 ) FreeWire = 0 ( 8 ) FreeEdge = 64 ( 64 ) SharedEdge = 356 ( 356 )
-TOLERANCE : MaxTol = 0.01775256793 ( 0.09055851084 ) AvgTol = 0.00206647858 ( 0.006259859734 )
-LABELS : N0Labels = 5 ( 5 ) N1Labels = 3 ( 3 ) N2Labels = 0 ( 0 ) TotalLabels = 8 ( 8 ) NameLabels = 8 ( 8 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 16 -max_faults 0
+checkxstat D_First -n0 5 -n1 3 -n2 0 -total 8 -withname 8 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 102 -shape 967
+checkstatshape res_1 -solid 1 -shell 1 -face 102 -freewire 8 -freeedge 64 -sharededge 356
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.09055851084 -avg 0.006259859734]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 16 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 3 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 5 -n1 3 -n2 0 -total 8 -withname 8 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 5 -n1 3 -n2 0 -total 8 -withname 8 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 102 -shape 1024 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 102 -freewire 0 -freeedge 64 -sharededge 356 -max_solid 1 -max_shell 1 -max_face 102 -max_freewire 8 -max_freeedge 64
+checkmaxtol res_2 -tol 0.01775256793 -avg 0.00206647858 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
-
set filename CTS20315-1.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 24 ( 20 ) Summary = 24 ( 20 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 182 ( 182 ) Face = 182 ( 182 ) Summary = 2387 ( 2387 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 182 ( 182 ) Face = 182 ( 182 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 920 ( 920 )
-TOLERANCE : MaxTol = 0.03817388423 ( 0.03817388423 ) AvgTol = 0.0008054885645 ( 0.001917006832 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 20 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 182 -face 182 -shape 2387
+checkstatshape res_1 -solid 0 -shell 182 -face 182 -freewire 0 -freeedge 0 -sharededge 920
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.03817388423 -avg 0.001917006832]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 20 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 24 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 182 -face 182 -shape 2387 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 182 -face 182 -freewire 0 -freeedge 0 -sharededge 920 -max_solid 0 -max_shell 182 -max_face 182 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.03817388423 -avg 0.0008054885645 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename Inventor_AdjustableBracket.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 33 ( 35 ) Summary = 33 ( 35 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 9 ( 9 ) Shell = 9 ( 9 ) Face = 256 ( 256 ) Summary = 1594 ( 1594 )
-STATSHAPE : Solid = 9 ( 9 ) Shell = 9 ( 9 ) Face = 256 ( 256 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 631 ( 631 )
-TOLERANCE : MaxTol = 0.04148434363 ( 0.04230490857 ) AvgTol = 0.0009235591059 ( 0.0009349208901 )
-LABELS : N0Labels = 11 ( 11 ) N1Labels = 10 ( 10 ) N2Labels = 0 ( 0 ) TotalLabels = 21 ( 21 ) NameLabels = 21 ( 21 ) ColorLabels = 9 ( 9 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 4 ( 4 )
-COLORS : Colors = DARKSEAGREEN GOLD2 GRAY50 GRAY97 ( DARKSEAGREEN GOLD2 GRAY50 GRAY97 )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 35 -max_faults 0
+checkxstat D_First -n0 11 -n1 10 -n2 0 -total 21 -withname 21 -withcolor 9 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { DARKSEAGREEN GOLD2 GRAY50 GRAY97 } -nbcolors 4 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 9 -shell 9 -face 256 -shape 1594
+checkstatshape res_1 -solid 9 -shell 9 -face 256 -freewire 0 -freeedge 0 -sharededge 631
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.04230490857 -avg 0.0009349208901]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 35 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 33 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 11 -n1 10 -n2 0 -total 21 -withname 21 -withcolor 9 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 4 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 11 -n1 10 -n2 0 -total 21 -withname 21 -withcolor 9 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { DARKSEAGREEN GOLD2 GRAY50 GRAY97 } -nbcolors 4 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 9 -shell 9 -face 256 -shape 1594 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 9 -shell 9 -face 256 -freewire 0 -freeedge 0 -sharededge 631 -max_solid 9 -max_shell 9 -max_face 256 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.04148434363 -avg 0.0009235591059 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename Inventor_Container.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 31 ( 34 ) Summary = 31 ( 34 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 2 ( 2 ) Shell = 2 ( 2 ) Face = 300 ( 300 ) Summary = 1570 ( 1570 )
-STATSHAPE : Solid = 2 ( 2 ) Shell = 2 ( 2 ) Face = 300 ( 300 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 631 ( 631 )
-TOLERANCE : MaxTol = 0.02983526473 ( 0.02983526473 ) AvgTol = 0.000466907808 ( 0.0004669562427 )
-LABELS : N0Labels = 3 ( 3 ) N1Labels = 2 ( 2 ) N2Labels = 0 ( 0 ) TotalLabels = 5 ( 5 ) NameLabels = 5 ( 5 ) ColorLabels = 2 ( 2 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = GRAY80 SPRINGGREEN3 ( GRAY80 SPRINGGREEN3 )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 34 -max_faults 0
+checkxstat D_First -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 2 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { GRAY80 SPRINGGREEN3 } -nbcolors 2 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 2 -shell 2 -face 300 -shape 1570
+checkstatshape res_1 -solid 2 -shell 2 -face 300 -freewire 0 -freeedge 0 -sharededge 631
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.02983526473 -avg 0.0004669562427]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 34 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 31 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 2 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 2 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 2 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { GRAY80 SPRINGGREEN3 } -nbcolors 2 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 2 -shell 2 -face 300 -shape 1570 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 2 -shell 2 -face 300 -freewire 0 -freeedge 0 -sharededge 631 -max_solid 2 -max_shell 2 -max_face 300 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.02983526473 -avg 0.000466907808 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename Inventor_iPartExample.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 16 ) Warnings = 0 ( 0 ) Summary = 0 ( 16 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 8 ( 8 ) Shell = 8 ( 8 ) Face = 517 ( 517 ) Summary = 3521 ( 3521 )
-STATSHAPE : Solid = 8 ( 8 ) Shell = 8 ( 8 ) Face = 517 ( 517 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 1464 ( 1464 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1.000100003e-007 ) AvgTol = 1.00006193e-007 ( 1.00006193e-007 )
-LABELS : N0Labels = 9 ( 9 ) N1Labels = 11 ( 11 ) N2Labels = 0 ( 0 ) TotalLabels = 20 ( 20 ) NameLabels = 17 ( 17 ) ColorLabels = 8 ( 8 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = GRAY66 SANDYBROWN ( GRAY66 SANDYBROWN )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 16
+checkxstat D_First -n0 9 -n1 11 -n2 0 -total 20 -withname 17 -withcolor 8 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { GRAY66 SANDYBROWN } -nbcolors 2 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 8 -shell 8 -face 517 -shape 3521
+checkstatshape res_1 -solid 8 -shell 8 -face 517 -freewire 0 -freeedge 0 -sharededge 1464
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-007 -avg 1.00006193e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 16
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 9 -n1 11 -n2 0 -total 20 -withname 17 -withcolor 8 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 2 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 9 -n1 11 -n2 0 -total 20 -withname 17 -withcolor 8 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { GRAY66 SANDYBROWN } -nbcolors 2 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 8 -shell 8 -face 517 -shape 3521 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 8 -shell 8 -face 517 -freewire 0 -freeedge 0 -sharededge 1464 -max_solid 8 -max_shell 8 -max_face 517 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.00006193e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename PRO10360.stp
-set ref_data {
-DATA : Faulties = 0 ( 30 ) Warnings = 0 ( 0 ) Summary = 0 ( 30 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 9 ( 45 ) Summary = 9 ( 45 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 5 ( 5 ) Shell = 6 ( 6 ) Face = 78 ( 78 ) Summary = 468 ( 468 )
-STATSHAPE : Solid = 5 ( 5 ) Shell = 6 ( 6 ) Face = 78 ( 78 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 179 ( 179 )
-TOLERANCE : MaxTol = 1.742202567e-05 ( 0.0003632648967 ) AvgTol = 9.91071441e-07 ( 6.746245548e-06 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 30
+checkdoc "tpstat c" -max_warns 43 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 5 -shell 6 -face 78 -shape 468
+checkstatshape res_1 -solid 5 -shell 6 -face 78 -freewire 0 -freeedge 0 -sharededge 179
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.0003632648967 -avg 6.746245548e-06]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 30
+checkdoc "tpstat c" -max_warns 43 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 14 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 5 -shell 6 -face 78 -shape 468 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 5 -shell 6 -face 78 -freewire 0 -freeedge 0 -sharededge 179 -max_solid 5 -max_shell 6 -max_face 78 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.742202567e-05 -avg 9.91071441e-07 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
-
set filename PRO10370.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 2 ( 1 ) Summary = 2 ( 1 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 29 ( 29 ) Summary = 169 ( 169 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 29 ( 29 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 68 ( 68 )
-TOLERANCE : MaxTol = 6.263650663e-007 ( 6.263649916e-007 ) AvgTol = 2.054680385e-007 ( 2.067806097e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 2 ( 2 ) N2Labels = 0 ( 0 ) TotalLabels = 3 ( 3 ) NameLabels = 1 ( 1 ) ColorLabels = 3 ( 3 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 3 ( 3 )
-COLORS : Colors = DEEPPINK2 MEDIUMTURQUOISE YELLOW ( DEEPPINK2 MEDIUMTURQUOISE YELLOW )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+checkxstat D_First -n0 1 -n1 2 -n2 0 -total 3 -withname 1 -withcolor 3 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { DEEPPINK2 MEDIUMTURQUOISE YELLOW } -nbcolors 3 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 1 -face 29 -shape 169
+checkstatshape res_1 -solid 0 -shell 1 -face 29 -freewire 0 -freeedge 0 -sharededge 68
+set max_tol_res_1 [checkmaxtol res_1 -tol 6.263649916e-007 -avg 2.067806097e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 2 -n2 0 -total 3 -withname 1 -withcolor 3 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 3 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 2 -n2 0 -total 3 -withname 1 -withcolor 3 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { DEEPPINK2 MEDIUMTURQUOISE YELLOW } -nbcolors 3 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 1 -face 29 -shape 169 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 1 -face 29 -freewire 0 -freeedge 0 -sharededge 68 -max_solid 0 -max_shell 1 -max_face 29 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 6.263650663e-007 -avg 2.054680385e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename PRO10371.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 5 ( 5 ) Shell = 5 ( 5 ) Face = 153 ( 153 ) Summary = 890 ( 890 )
-STATSHAPE : Solid = 9 ( 9 ) Shell = 9 ( 9 ) Face = 300 ( 300 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 353 ( 353 )
-TOLERANCE : MaxTol = 6.215531674e-007 ( 6.190520296e-007 ) AvgTol = 2.022786755e-007 ( 2.021534652e-007 )
-LABELS : N0Labels = 7 ( 7 ) N1Labels = 7 ( 7 ) N2Labels = 0 ( 0 ) TotalLabels = 14 ( 14 ) NameLabels = 14 ( 14 ) ColorLabels = 5 ( 5 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 5 ( 5 )
-COLORS : Colors = FORESTGREEN LIGHTSTEELBLUE3 MEDIUMPURPLE2 ROYALBLUE TAN2 ( FORESTGREEN LIGHTSTEELBLUE3 MEDIUMPURPLE2 ROYALBLUE TAN2 )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 7 -n1 7 -n2 0 -total 14 -withname 14 -withcolor 5 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { FORESTGREEN LIGHTSTEELBLUE3 MEDIUMPURPLE2 ROYALBLUE TAN2 } -nbcolors 5 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 5 -shell 5 -face 153 -shape 890
+checkstatshape res_1 -solid 9 -shell 9 -face 300 -freewire 0 -freeedge 0 -sharededge 353
+set max_tol_res_1 [checkmaxtol res_1 -tol 6.190520296e-007 -avg 2.021534652e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 7 -n1 7 -n2 0 -total 14 -withname 14 -withcolor 5 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 5 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 7 -n1 7 -n2 0 -total 14 -withname 14 -withcolor 5 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { FORESTGREEN LIGHTSTEELBLUE3 MEDIUMPURPLE2 ROYALBLUE TAN2 } -nbcolors 5 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 5 -shell 5 -face 153 -shape 890 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 9 -shell 9 -face 300 -freewire 0 -freeedge 0 -sharededge 353 -max_solid 9 -max_shell 9 -max_face 300 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 6.215531674e-007 -avg 2.022786755e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename PRO10376.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 2 ( 2 ) Summary = 2 ( 2 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 36 ( 36 ) Face = 36 ( 36 ) Summary = 600 ( 600 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 36 ( 36 ) Face = 36 ( 36 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 246 ( 246 )
-TOLERANCE : MaxTol = 0.0200634573 ( 0.0230274088 ) AvgTol = 0.001342925364 ( 0.002493523287 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 72 ( 72 ) N2Labels = 0 ( 0 ) TotalLabels = 73 ( 73 ) NameLabels = 1 ( 1 ) ColorLabels = 36 ( 36 ) LayerLabels = 36 ( 36 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 4 ( 4 )
-COLORS : Colors = GREEN RED TURQUOISE WHITE ( GREEN RED TURQUOISE WHITE )
-NLAYERS : NLayers = 4 ( 4 )
-LAYERS : Layers = 10 20 250 30 ( 10 20 250 30 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+checkxstat D_First -n0 1 -n1 72 -n2 0 -total 73 -withname 1 -withcolor 36 -withlayer 36 -centroid 0 -volume 0 -area 0 -colors { GREEN RED TURQUOISE WHITE } -nbcolors 4 -layers { 10 20 250 30 } -nblayers 4
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 36 -face 36 -shape 600
+checkstatshape res_1 -solid 0 -shell 36 -face 36 -freewire 0 -freeedge 0 -sharededge 246
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.0230274088 -avg 0.002493523287]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 72 -n2 0 -total 73 -withname 1 -withcolor 36 -withlayer 36 -centroid 0 -volume 0 -area 0 -nbcolors 4 -nblayers 4
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 72 -n2 0 -total 73 -withname 1 -withcolor 36 -withlayer 36 -centroid 0 -volume 0 -area 0 -colors { GREEN RED TURQUOISE WHITE } -nbcolors 4 -layers { 10 20 250 30 } -nblayers 4
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 36 -face 36 -shape 600 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 36 -face 36 -freewire 0 -freeedge 0 -sharededge 246 -max_solid 0 -max_shell 36 -max_face 36 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.0200634573 -avg 0.001342925364 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename PRO7073.stp
-set ref_data {
-DATA : Faulties = 0 ( 123 ) Warnings = 0 ( 0 ) Summary = 0 ( 123 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 7 ( 19 ) Summary = 7 ( 19 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 66 ( 66 ) Summary = 955 ( 833 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 66 ( 66 ) FreeWire = 0 ( 0 ) FreeEdge = 122 ( 122 ) SharedEdge = 325 ( 325 )
-TOLERANCE : MaxTol = 0.1618955924 ( 0.3526187023 ) AvgTol = 0.03794615013 ( 0.05391633347 )
-LABELS : N0Labels = 3 ( 3 ) N1Labels = 124 ( 124 ) N2Labels = 0 ( 0 ) TotalLabels = 127 ( 127 ) NameLabels = 5 ( 5 ) ColorLabels = 123 ( 123 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 7 ( 7 )
-COLORS : Colors = CYAN1 FORESTGREEN GREEN INDIANRED1 MAGENTA1 WHITE YELLOW ( CYAN1 FORESTGREEN GREEN INDIANRED1 MAGENTA1 WHITE YELLOW )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 123
+checkdoc "tpstat c" -max_warns 19 -max_faults 0
+checkxstat D_First -n0 3 -n1 124 -n2 0 -total 127 -withname 5 -withcolor 123 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { CYAN1 FORESTGREEN GREEN INDIANRED1 MAGENTA1 WHITE YELLOW } -nbcolors 7 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 1 -face 66 -shape 833
+checkstatshape res_1 -solid 0 -shell 1 -face 66 -freewire 0 -freeedge 122 -sharededge 325
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.3526187023 -avg 0.05391633347]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 123
+checkdoc "tpstat c" -max_warns 19 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 7 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3 -n1 124 -n2 0 -total 127 -withname 5 -withcolor 123 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 7 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 124 -n2 0 -total 127 -withname 5 -withcolor 123 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { CYAN1 FORESTGREEN GREEN INDIANRED1 MAGENTA1 WHITE YELLOW } -nbcolors 7 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 1 -face 66 -shape 955 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 1 -face 66 -freewire 0 -freeedge 122 -sharededge 325 -max_solid 0 -max_shell 1 -max_face 66 -max_freewire 0 -max_freeedge 122
+checkmaxtol res_2 -tol 0.1618955924 -avg 0.03794615013 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename PRO7747.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 13 ( 15 ) Summary = 13 ( 15 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 2 ( 2 ) Face = 129 ( 129 ) Summary = 736 ( 736 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 2 ( 2 ) Face = 129 ( 129 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 303 ( 303 )
-TOLERANCE : MaxTol = 3.599182522 ( 3.660503978 ) AvgTol = 0.04641182233 ( 0.05502400806 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 15 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 2 -face 129 -shape 736
+checkstatshape res_1 -solid 0 -shell 2 -face 129 -freewire 0 -freeedge 0 -sharededge 303
+set max_tol_res_1 [checkmaxtol res_1 -tol 3.660503978 -avg 0.05502400806]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 15 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 13 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 2 -face 129 -shape 736 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 2 -face 129 -freewire 0 -freeedge 0 -sharededge 303 -max_solid 0 -max_shell 2 -max_face 129 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 3.599182522 -avg 0.04641182233 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename PRO8845.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 13 ( 14 ) Summary = 13 ( 14 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 251 ( 251 ) Summary = 1661 ( 1661 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 251 ( 251 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 701 ( 701 )
-TOLERANCE : MaxTol = 0.01076675661 ( 0.01076675661 ) AvgTol = 8.350462389e-005 ( 8.350567025e-005 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 14 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 251 -shape 1661
+checkstatshape res_1 -solid 1 -shell 1 -face 251 -freewire 0 -freeedge 0 -sharededge 701
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.01076675661 -avg 8.350567025e-005]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 14 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 13 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 251 -shape 1661 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 251 -freewire 0 -freeedge 0 -sharededge 701 -max_solid 1 -max_shell 1 -max_face 251 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.01076675661 -avg 8.350462389e-005 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename PRO9236.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 6 ) Summary = 0 ( 6 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 2 ( 2 ) Shell = 8 ( 8 ) Face = 816 ( 816 ) Summary = 7171 ( 6740 )
-STATSHAPE : Solid = 2 ( 2 ) Shell = 8 ( 8 ) Face = 816 ( 816 ) FreeWire = 0 ( 0 ) FreeEdge = 431 ( 431 ) SharedEdge = 2673 ( 2673 )
-TOLERANCE : MaxTol = 0.000519532422 ( 0.000519532422 ) AvgTol = 5.643561424e-006 ( 5.695706317e-006 )
-LABELS : N0Labels = 4 ( 4 ) N1Labels = 442 ( 442 ) N2Labels = 0 ( 0 ) TotalLabels = 446 ( 446 ) NameLabels = 7 ( 7 ) ColorLabels = 439 ( 439 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 9 ( 9 )
-COLORS : Colors = BLUE1 CYAN1 DARKORANGE1 FORESTGREEN GRAY40 GREEN MAGENTA1 WHITE YELLOW ( BLUE1 CYAN1 DARKORANGE1 FORESTGREEN GRAY40 GREEN MAGENTA1 WHITE YELLOW )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 6 -max_faults 0
+checkxstat D_First -n0 4 -n1 442 -n2 0 -total 446 -withname 7 -withcolor 439 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 CYAN1 DARKORANGE1 FORESTGREEN GRAY40 GREEN MAGENTA1 WHITE YELLOW } -nbcolors 9 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 2 -shell 8 -face 816 -shape 6740
+checkstatshape res_1 -solid 2 -shell 8 -face 816 -freewire 0 -freeedge 431 -sharededge 2673
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.000519532422 -avg 5.695706317e-006]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 6 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 4 -n1 442 -n2 0 -total 446 -withname 7 -withcolor 439 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 9 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 4 -n1 442 -n2 0 -total 446 -withname 7 -withcolor 439 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 CYAN1 DARKORANGE1 FORESTGREEN GRAY40 GREEN MAGENTA1 WHITE YELLOW } -nbcolors 9 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 2 -shell 8 -face 816 -shape 7171 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 2 -shell 8 -face 816 -freewire 0 -freeedge 431 -sharededge 2673 -max_solid 2 -max_shell 8 -max_face 816 -max_freewire 0 -max_freeedge 431
+checkmaxtol res_2 -tol 0.000519532422 -avg 5.643561424e-006 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
-
set filename Sbottle.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 24 ( 3 ) Summary = 24 ( 3 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 149 ( 149 ) Summary = 826 ( 826 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 149 ( 149 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 336 ( 336 )
-TOLERANCE : MaxTol = 0.002984408435 ( 0.003792052185 ) AvgTol = 0.00116306994 ( 0.001318127918 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 3 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 1 -face 149 -shape 826
+checkstatshape res_1 -solid 0 -shell 1 -face 149 -freewire 0 -freeedge 0 -sharededge 336
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.003792052185 -avg 0.001318127918]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 3 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 24 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 1 -face 149 -shape 826 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 1 -face 149 -freewire 0 -freeedge 0 -sharededge 336 -max_solid 0 -max_shell 1 -max_face 149 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.002984408435 -avg 0.00116306994 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename carcasse_gauche_simpl3.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 6 ( 16 ) Summary = 6 ( 16 )
-CHECKSHAPE : Wires = 1 ( 1 ) Faces = 1 ( 1 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 600 ( 600 ) Summary = 4036 ( 4036 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 600 ( 600 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 1713 ( 1713 )
-TOLERANCE : MaxTol = 0.2070257209 ( 0.2070257209 ) AvgTol = 0.003182074294 ( 0.007107905924 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 17 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 1 -max_faces 1 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 600 -shape 4036
+checkstatshape res_1 -solid 1 -shell 1 -face 600 -freewire 0 -freeedge 0 -sharededge 1713
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.2070257209 -avg 0.007107905924]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 17 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 5 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 1 -max_faces 1 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 1 -max_faces 1 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 600 -shape 4036 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 600 -freewire 0 -freeedge 0 -sharededge 1713 -max_solid 1 -max_shell 1 -max_face 600 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.2070257209 -avg 0.003182074294 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename nozzle.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 53 ) Summary = 0 ( 53 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 141 ( 141 ) Summary = 1125 ( 1125 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 141 ( 141 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 441 ( 441 )
-TOLERANCE : MaxTol = 9.86664844e-006 ( 4.617271574e-005 ) AvgTol = 2.035223209e-006 ( 4.455446939e-006 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 53 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 141 -shape 1125
+checkstatshape res_1 -solid 1 -shell 1 -face 141 -freewire 0 -freeedge 0 -sharededge 441
+set max_tol_res_1 [checkmaxtol res_1 -tol 4.617271574e-005 -avg 4.455446939e-006]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 53 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 141 -shape 1125 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 141 -freewire 0 -freeedge 0 -sharededge 441 -max_solid 1 -max_shell 1 -max_face 141 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 9.86664844e-006 -avg 2.035223209e-006 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename UKI60569-2.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 55 ( 59 ) Summary = 55 ( 59 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 219 ( 219 ) Summary = 1685 ( 1626 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 219 ( 219 ) FreeWire = 0 ( 0 ) FreeEdge = 58 ( 58 ) SharedEdge = 643 ( 643 )
-TOLERANCE : MaxTol = 0.004786272898 ( 0.009138362239 ) AvgTol = 0.000424289509 ( 0.0008489791221 )
-LABELS : N0Labels = 3 ( 3 ) N1Labels = 192 ( 192 ) N2Labels = 0 ( 0 ) TotalLabels = 195 ( 195 ) NameLabels = 5 ( 5 ) ColorLabels = 191 ( 191 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 5 ( 5 )
-COLORS : Colors = BLUE1 DEEPSKYBLUE2 MAGENTA1 ORANGE ORANGERED ( BLUE1 DEEPSKYBLUE2 MAGENTA1 ORANGE ORANGERED )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 60 -max_faults 0
+checkxstat D_First -n0 3 -n1 192 -n2 0 -total 195 -withname 5 -withcolor 191 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 DEEPSKYBLUE2 MAGENTA1 ORANGE ORANGERED } -nbcolors 5 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 219 -shape 1626
+checkstatshape res_1 -solid 1 -shell 1 -face 219 -freewire 0 -freeedge 58 -sharededge 643
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.009138362239 -avg 0.0008489791221]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 60 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 53 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3 -n1 192 -n2 0 -total 195 -withname 5 -withcolor 191 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 5 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 192 -n2 0 -total 195 -withname 5 -withcolor 191 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 DEEPSKYBLUE2 MAGENTA1 ORANGE ORANGERED } -nbcolors 5 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 219 -shape 1685 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 219 -freewire 0 -freeedge 58 -sharededge 643 -max_solid 1 -max_shell 1 -max_face 219 -max_freewire 0 -max_freeedge 58
+checkmaxtol res_2 -tol 0.004786272898 -avg 0.000424289509 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename USA60035.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 1 ) Summary = 0 ( 1 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 0 ( 0 ) Summary = 4581 ( 3437 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 0 ( 0 ) FreeWire = 0 ( 0 ) FreeEdge = 1143 ( 1143 ) SharedEdge = 1143 ( 1143 )
-TOLERANCE : MaxTol = 1e-007 ( 1e-007 ) AvgTol = 1e-007 ( 1e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 0 -shape 3437
+checkstatshape res_1 -solid 0 -shell 0 -face 0 -freewire 0 -freeedge 1143 -sharededge 1143
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-007 -avg 1e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 0 -face 0 -shape 4581 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 0 -freewire 0 -freeedge 1143 -sharededge 1143 -max_solid 0 -max_shell 0 -max_face 0 -max_freewire 0 -max_freeedge 1143
+checkmaxtol res_2 -tol 1e-007 -avg 1e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename absmx.stp
-set ref_data {
-DATA : Faulties = 0 ( 17 ) Warnings = 0 ( 0 ) Summary = 0 ( 17 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 17 ( 17 ) Summary = 17 ( 17 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 2 ( 2 ) Face = 70 ( 70 ) Summary = 415 ( 415 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 2 ( 2 ) Face = 70 ( 70 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 157 ( 157 )
-TOLERANCE : MaxTol = 1e-07 ( 1e-07 ) AvgTol = 1e-07 ( 1e-07 )
-LABELS : N0Labels = 2 ( 2 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 2 ( 2 ) NameLabels = 2 ( 2 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 17
+checkdoc "tpstat c" -max_warns 17 -max_faults 0
+checkxstat D_First -n0 2 -n1 0 -n2 0 -total 2 -withname 2 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 2 -face 70 -shape 415
+checkstatshape res_1 -solid 1 -shell 2 -face 70 -freewire 0 -freeedge 0 -sharededge 157
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-07 -avg 1e-07]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 17
+checkdoc "tpstat c" -max_warns 17 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 17 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 2 -n1 0 -n2 0 -total 2 -withname 2 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 2 -n1 0 -n2 0 -total 2 -withname 2 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 2 -face 70 -shape 415 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 2 -face 70 -freewire 0 -freeedge 0 -sharededge 157 -max_solid 1 -max_shell 2 -max_face 70 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1e-07 -avg 1e-07 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename absmx2.stp
-set ref_data {
-DATA : Faulties = 0 ( 17 ) Warnings = 0 ( 0 ) Summary = 0 ( 17 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 11 ( 11 ) Summary = 11 ( 11 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 2 ( 2 ) Face = 70 ( 70 ) Summary = 425 ( 425 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 2 ( 2 ) Face = 70 ( 70 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 162 ( 162 )
-TOLERANCE : MaxTol = 8.362307401e-06 ( 1.048889537e-05 ) AvgTol = 1.956621381e-07 ( 2.202233081e-07 )
-LABELS : N0Labels = 2 ( 2 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 2 ( 2 ) NameLabels = 2 ( 2 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 17
+checkdoc "tpstat c" -max_warns 11 -max_faults 0
+checkxstat D_First -n0 2 -n1 0 -n2 0 -total 2 -withname 2 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 2 -face 70 -shape 425
+checkstatshape res_1 -solid 1 -shell 2 -face 70 -freewire 0 -freeedge 0 -sharededge 162
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.048889537e-05 -avg 2.202233081e-07]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 17
+checkdoc "tpstat c" -max_warns 11 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 11 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 2 -n1 0 -n2 0 -total 2 -withname 2 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 2 -n1 0 -n2 0 -total 2 -withname 2 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 2 -face 70 -shape 425 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 2 -face 70 -freewire 0 -freeedge 0 -sharededge 162 -max_solid 1 -max_shell 2 -max_face 70 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 8.362307401e-06 -avg 1.956621381e-07 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename absmxn.stp
-set ref_data {
-DATA : Faulties = 0 ( 17 ) Warnings = 0 ( 0 ) Summary = 0 ( 17 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 11 ( 11 ) Summary = 11 ( 11 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 2 ( 2 ) Face = 70 ( 70 ) Summary = 425 ( 425 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 2 ( 2 ) Face = 70 ( 70 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 162 ( 162 )
-TOLERANCE : MaxTol = 8.362307401e-06 ( 1.048889537e-05 ) AvgTol = 1.956621381e-07 ( 2.202233081e-07 )
-LABELS : N0Labels = 2 ( 2 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 2 ( 2 ) NameLabels = 2 ( 2 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 17
+checkdoc "tpstat c" -max_warns 11 -max_faults 0
+checkxstat D_First -n0 2 -n1 0 -n2 0 -total 2 -withname 2 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 2 -face 70 -shape 425
+checkstatshape res_1 -solid 1 -shell 2 -face 70 -freewire 0 -freeedge 0 -sharededge 162
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.048889537e-05 -avg 2.202233081e-07]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 17
+checkdoc "tpstat c" -max_warns 11 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 11 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 2 -n1 0 -n2 0 -total 2 -withname 2 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 2 -n1 0 -n2 0 -total 2 -withname 2 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 2 -face 70 -shape 425 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 2 -face 70 -freewire 0 -freeedge 0 -sharededge 162 -max_solid 1 -max_shell 2 -max_face 70 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 8.362307401e-06 -avg 1.956621381e-07 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename bm1_pe_exhaust.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 84 ( 84 ) Summary = 477 ( 477 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 84 ( 84 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 188 ( 188 )
-TOLERANCE : MaxTol = 0.06142318886 ( 0.4504518198 ) AvgTol = 0.01076191057 ( 0.04960239377 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 1 -face 84 -shape 477
+checkstatshape res_1 -solid 0 -shell 1 -face 84 -freewire 0 -freeedge 0 -sharededge 188
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.4504518198 -avg 0.04960239377]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 1 -face 84 -shape 477 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 1 -face 84 -freewire 0 -freeedge 0 -sharededge 188 -max_solid 0 -max_shell 1 -max_face 84 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.06142318886 -avg 0.01076191057 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename bm1_sd_exhaust.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 1 ) Summary = 0 ( 1 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 8 ( 8 ) Shell = 8 ( 8 ) Face = 112 ( 112 ) Summary = 805 ( 805 )
-STATSHAPE : Solid = 8 ( 8 ) Shell = 8 ( 8 ) Face = 112 ( 112 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 324 ( 324 )
-TOLERANCE : MaxTol = 0.0001990392016 ( 0.0005993176483 ) AvgTol = 2.653422516e-005 ( 8.791024979e-005 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 8 -shell 8 -face 112 -shape 805
+checkstatshape res_1 -solid 8 -shell 8 -face 112 -freewire 0 -freeedge 0 -sharededge 324
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.0005993176483 -avg 8.791024979e-005]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 8 -shell 8 -face 112 -shape 805 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 8 -shell 8 -face 112 -freewire 0 -freeedge 0 -sharededge 324 -max_solid 8 -max_shell 8 -max_face 112 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.0001990392016 -avg 2.653422516e-005 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
-
set filename bm2_id_exhaust-A.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 23 ( 21 ) Summary = 23 ( 21 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 161 ( 161 ) Summary = 867 ( 864 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 161 ( 161 ) FreeWire = 0 ( 0 ) FreeEdge = 2 ( 2 ) SharedEdge = 339 ( 339 )
-TOLERANCE : MaxTol = 0.006107914079 ( 0.008375853082 ) AvgTol = 0.001105232411 ( 0.001173158255 )
-LABELS : N0Labels = 3 ( 3 ) N1Labels = 2 ( 2 ) N2Labels = 0 ( 0 ) TotalLabels = 5 ( 5 ) NameLabels = 5 ( 5 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 21 -max_faults 0
+checkxstat D_First -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 161 -shape 864
+checkstatshape res_1 -solid 1 -shell 1 -face 161 -freewire 0 -freeedge 2 -sharededge 339
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.008375853082 -avg 0.001173158255]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 21 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 23 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 161 -shape 867 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 161 -freewire 0 -freeedge 2 -sharededge 339 -max_solid 1 -max_shell 1 -max_face 161 -max_freewire 0 -max_freeedge 2
+checkmaxtol res_2 -tol 0.006107914079 -avg 0.001105232411 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename bm2_id_exhaust-B.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 2 ) Warnings = 22 ( 23 ) Summary = 22 ( 25 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 2 ( 2 ) Face = 159 ( 159 ) Summary = 862 ( 859 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 2 ( 2 ) Face = 159 ( 159 ) FreeWire = 0 ( 0 ) FreeEdge = 2 ( 2 ) SharedEdge = 337 ( 337 )
-TOLERANCE : MaxTol = 0.006107914079 ( 0.008375853082 ) AvgTol = 0.001140158832 ( 0.001241335964 )
-LABELS : N0Labels = 3 ( 3 ) N1Labels = 2 ( 2 ) N2Labels = 0 ( 0 ) TotalLabels = 5 ( 5 ) NameLabels = 5 ( 5 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 23 -max_faults 2
+checkxstat D_First -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 2 -face 159 -shape 859
+checkstatshape res_1 -solid 0 -shell 2 -face 159 -freewire 0 -freeedge 2 -sharededge 337
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.008375853082 -avg 0.001241335964]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 23 -max_faults 2
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 22 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 2 -face 159 -shape 862 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 2 -face 159 -freewire 0 -freeedge 2 -sharededge 337 -max_solid 0 -max_shell 2 -max_face 159 -max_freewire 0 -max_freeedge 2
+checkmaxtol res_2 -tol 0.006107914079 -avg 0.001140158832 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename bm2_pe_exhaust-A.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 62 ( 62 ) Summary = 332 ( 332 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 62 ( 62 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 128 ( 128 )
-TOLERANCE : MaxTol = 0.00249989428 ( 0.002631974883 ) AvgTol = 0.0003639077926 ( 0.0003724293085 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 62 -shape 332
+checkstatshape res_1 -solid 1 -shell 1 -face 62 -freewire 0 -freeedge 0 -sharededge 128
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.002631974883 -avg 0.0003724293085]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 62 -shape 332 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 62 -freewire 0 -freeedge 0 -sharededge 128 -max_solid 1 -max_shell 1 -max_face 62 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.00249989428 -avg 0.0003639077926 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename bm2_sd_exhaust-A.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 8 ( 8 ) Shell = 8 ( 8 ) Face = 112 ( 112 ) Summary = 805 ( 805 )
-STATSHAPE : Solid = 8 ( 8 ) Shell = 8 ( 8 ) Face = 112 ( 112 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 324 ( 324 )
-TOLERANCE : MaxTol = 4.298829269e-007 ( 4.29759467e-007 ) AvgTol = 1.119570039e-007 ( 1.119511278e-007 )
-LABELS : N0Labels = 8 ( 8 ) N1Labels = 41 ( 41 ) N2Labels = 0 ( 0 ) TotalLabels = 49 ( 49 ) NameLabels = 8 ( 8 ) ColorLabels = 41 ( 41 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = RED ( RED )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 8 -n1 41 -n2 0 -total 49 -withname 8 -withcolor 41 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { RED } -nbcolors 1 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 8 -shell 8 -face 112 -shape 805
+checkstatshape res_1 -solid 8 -shell 8 -face 112 -freewire 0 -freeedge 0 -sharededge 324
+set max_tol_res_1 [checkmaxtol res_1 -tol 4.29759467e-007 -avg 1.119511278e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 8 -n1 41 -n2 0 -total 49 -withname 8 -withcolor 41 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 8 -n1 41 -n2 0 -total 49 -withname 8 -withcolor 41 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { RED } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 8 -shell 8 -face 112 -shape 805 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 8 -shell 8 -face 112 -freewire 0 -freeedge 0 -sharededge 324 -max_solid 8 -max_shell 8 -max_face 112 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 4.298829269e-007 -avg 1.119570039e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename bm2_sd_exhaust-B.stp
-set ref_data {
-DATA : Faulties = 0 ( 242 ) Warnings = 0 ( 0 ) Summary = 0 ( 242 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 8 ( 8 ) Shell = 8 ( 8 ) Face = 112 ( 112 ) Summary = 805 ( 805 )
-STATSHAPE : Solid = 8 ( 8 ) Shell = 8 ( 8 ) Face = 112 ( 112 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 324 ( 324 )
-TOLERANCE : MaxTol = 4.482563499e-007 ( 4.480845215e-007 ) AvgTol = 1.126909033e-007 ( 1.126828552e-007 )
-LABELS : N0Labels = 8 ( 8 ) N1Labels = 41 ( 41 ) N2Labels = 0 ( 0 ) TotalLabels = 49 ( 49 ) NameLabels = 8 ( 8 ) ColorLabels = 41 ( 41 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = RED ( RED )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 726 -max_faults 242
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 8 -n1 41 -n2 0 -total 49 -withname 8 -withcolor 41 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { RED } -nbcolors 1 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 8 -shell 8 -face 112 -shape 805
+checkstatshape res_1 -solid 8 -shell 8 -face 112 -freewire 0 -freeedge 0 -sharededge 324
+set max_tol_res_1 [checkmaxtol res_1 -tol 4.480845215e-007 -avg 1.126828552e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 726 -max_faults 242
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 8 -n1 41 -n2 0 -total 49 -withname 8 -withcolor 41 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 8 -n1 41 -n2 0 -total 49 -withname 8 -withcolor 41 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { RED } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 8 -shell 8 -face 112 -shape 805 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 8 -shell 8 -face 112 -freewire 0 -freeedge 0 -sharededge 324 -max_solid 8 -max_shell 8 -max_face 112 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 4.482563499e-007 -avg 1.126909033e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename bm2_ug_t4-A.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 14 ( 14 ) Face = 14 ( 14 ) Summary = 157 ( 157 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 14 ( 14 ) Face = 14 ( 14 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 56 ( 56 )
-TOLERANCE : MaxTol = 0.0003158426652 ( 0.0003158424638 ) AvgTol = 3.55309309e-005 ( 3.553095606e-005 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 14 -face 14 -shape 157
+checkstatshape res_1 -solid 0 -shell 14 -face 14 -freewire 0 -freeedge 0 -sharededge 56
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.0003158424638 -avg 3.553095606e-005]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 14 -face 14 -shape 157 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 14 -face 14 -freewire 0 -freeedge 0 -sharededge 56 -max_solid 0 -max_shell 14 -max_face 14 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.0003158426652 -avg 3.55309309e-005 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename bm4_ac_conn.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 3 ( 3 ) Shell = 3 ( 3 ) Face = 499 ( 499 ) Summary = 3633 ( 3633 )
-STATSHAPE : Solid = 57 ( 57 ) Shell = 57 ( 57 ) Face = 1804 ( 1804 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 1476 ( 1476 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1.000100003e-007 ) AvgTol = 1.000093913e-007 ( 1.000093913e-007 )
-LABELS : N0Labels = 5 ( 5 ) N1Labels = 31 ( 31 ) N2Labels = 0 ( 0 ) TotalLabels = 36 ( 36 ) NameLabels = 36 ( 36 ) ColorLabels = 3 ( 3 ) LayerLabels = 3 ( 3 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 3 ( 3 )
-COLORS : Colors = CYAN1 GREEN YELLOW ( CYAN1 GREEN YELLOW )
-NLAYERS : NLayers = 2 ( 2 )
-LAYERS : Layers = 0 5 ( 0 5 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 5 -n1 31 -n2 0 -total 36 -withname 36 -withcolor 3 -withlayer 3 -centroid 0 -volume 0 -area 0 -colors { CYAN1 GREEN YELLOW } -nbcolors 3 -layers { 0 5 } -nblayers 2
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 3 -shell 3 -face 499 -shape 3633
+checkstatshape res_1 -solid 57 -shell 57 -face 1804 -freewire 0 -freeedge 0 -sharededge 1476
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-007 -avg 1.000093913e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 5 -n1 31 -n2 0 -total 36 -withname 36 -withcolor 3 -withlayer 3 -centroid 0 -volume 0 -area 0 -nbcolors 3 -nblayers 2
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 5 -n1 31 -n2 0 -total 36 -withname 36 -withcolor 3 -withlayer 3 -centroid 0 -volume 0 -area 0 -colors { CYAN1 GREEN YELLOW } -nbcolors 3 -layers { 0 5 } -nblayers 2
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 3 -shell 3 -face 499 -shape 3633 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 57 -shell 57 -face 1804 -freewire 0 -freeedge 0 -sharededge 1476 -max_solid 57 -max_shell 57 -max_face 1804 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.000093913e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename bm4_ac_conn_new.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 3 ( 3 ) Shell = 3 ( 3 ) Face = 499 ( 499 ) Summary = 3633 ( 3633 )
-STATSHAPE : Solid = 57 ( 57 ) Shell = 57 ( 57 ) Face = 1804 ( 1804 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 1476 ( 1476 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1.000100003e-007 ) AvgTol = 1.000093913e-007 ( 1.000093913e-007 )
-LABELS : N0Labels = 5 ( 5 ) N1Labels = 31 ( 31 ) N2Labels = 0 ( 0 ) TotalLabels = 36 ( 36 ) NameLabels = 36 ( 36 ) ColorLabels = 3 ( 3 ) LayerLabels = 3 ( 3 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 3 ( 3 )
-COLORS : Colors = CYAN1 GREEN YELLOW ( CYAN1 GREEN YELLOW )
-NLAYERS : NLayers = 3 ( 3 )
-LAYERS : Layers = 1 10 5 ( 1 10 5 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 5 -n1 31 -n2 0 -total 36 -withname 36 -withcolor 3 -withlayer 3 -centroid 0 -volume 0 -area 0 -colors { CYAN1 GREEN YELLOW } -nbcolors 3 -layers { 1 10 5 } -nblayers 3
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 3 -shell 3 -face 499 -shape 3633
+checkstatshape res_1 -solid 57 -shell 57 -face 1804 -freewire 0 -freeedge 0 -sharededge 1476
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-007 -avg 1.000093913e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 5 -n1 31 -n2 0 -total 36 -withname 36 -withcolor 3 -withlayer 3 -centroid 0 -volume 0 -area 0 -nbcolors 3 -nblayers 3
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 5 -n1 31 -n2 0 -total 36 -withname 36 -withcolor 3 -withlayer 3 -centroid 0 -volume 0 -area 0 -colors { CYAN1 GREEN YELLOW } -nbcolors 3 -layers { 1 10 5 } -nblayers 3
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 3 -shell 3 -face 499 -shape 3633 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 57 -shell 57 -face 1804 -freewire 0 -freeedge 0 -sharededge 1476 -max_solid 57 -max_shell 57 -max_face 1804 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.000093913e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename bm4_al_eye.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 5 ) Summary = 0 ( 5 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 3 ( 3 ) Face = 84 ( 84 ) Summary = 514 ( 512 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 3 ( 3 ) Face = 84 ( 84 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 214 ( 214 )
-TOLERANCE : MaxTol = 0.01165262121 ( 0.01165262121 ) AvgTol = 0.001853534837 ( 0.002062256871 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 5 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 3 -face 84 -shape 512
+checkstatshape res_1 -solid 0 -shell 3 -face 84 -freewire 0 -freeedge 0 -sharededge 214
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.01165262121 -avg 0.002062256871]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 5 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 3 -face 84 -shape 514 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 3 -face 84 -freewire 0 -freeedge 0 -sharededge 214 -max_solid 0 -max_shell 3 -max_face 84 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.01165262121 -avg 0.001853534837 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename bm4_ct_conn.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 33 ) Summary = 0 ( 33 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 3 ( 3 ) Shell = 3 ( 3 ) Face = 504 ( 504 ) Summary = 4626 ( 4420 )
-STATSHAPE : Solid = 57 ( 57 ) Shell = 57 ( 57 ) Face = 2022 ( 2022 ) FreeWire = 0 ( 0 ) FreeEdge = 412 ( 412 ) SharedEdge = 1762 ( 1762 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1.000100003e-007 ) AvgTol = 1.000090691e-007 ( 1.000090691e-007 )
-LABELS : N0Labels = 7 ( 7 ) N1Labels = 239 ( 239 ) N2Labels = 0 ( 0 ) TotalLabels = 246 ( 246 ) NameLabels = 40 ( 40 ) ColorLabels = 209 ( 209 ) LayerLabels = 209 ( 209 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 4 ( 4 )
-COLORS : Colors = BLUE1 CYAN1 RED YELLOW ( BLUE1 CYAN1 RED YELLOW )
-NLAYERS : NLayers = 4 ( 4 )
-LAYERS : Layers = 0 1 10 5 ( 0 1 10 5 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 6 -max_faults 0
+checkdoc "tpstat c" -max_warns 33 -max_faults 0
+checkxstat D_First -n0 7 -n1 239 -n2 0 -total 246 -withname 40 -withcolor 209 -withlayer 209 -centroid 0 -volume 0 -area 0 -colors { BLUE1 CYAN1 RED YELLOW } -nbcolors 4 -layers { 0 1 10 5 } -nblayers 4
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 3 -shell 3 -face 504 -shape 4420
+checkstatshape res_1 -solid 57 -shell 57 -face 2022 -freewire 0 -freeedge 412 -sharededge 1762
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-007 -avg 1.000090691e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 6 -max_faults 0
+checkdoc "tpstat c" -max_warns 33 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 7 -n1 239 -n2 0 -total 246 -withname 40 -withcolor 209 -withlayer 209 -centroid 0 -volume 0 -area 0 -nbcolors 4 -nblayers 4
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 7 -n1 239 -n2 0 -total 246 -withname 40 -withcolor 209 -withlayer 209 -centroid 0 -volume 0 -area 0 -colors { BLUE1 CYAN1 RED YELLOW } -nbcolors 4 -layers { 0 1 10 5 } -nblayers 4
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 3 -shell 3 -face 504 -shape 4626 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 57 -shell 57 -face 2022 -freewire 0 -freeedge 412 -sharededge 1762 -max_solid 57 -max_shell 57 -max_face 2022 -max_freewire 0 -max_freeedge 412
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.000090691e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
set filename bm4_ct_punch.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 4 ) Summary = 0 ( 4 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 32 ( 7 ) Summary = 32 ( 7 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 3 ( 3 ) Shell = 21 ( 21 ) Face = 197 ( 197 ) Summary = 1443 ( 1443 )
-STATSHAPE : Solid = 3 ( 3 ) Shell = 21 ( 21 ) Face = 197 ( 197 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 573 ( 573 )
-TOLERANCE : MaxTol = 0.255769437 ( 0.255769437 ) AvgTol = 0.0008786095241 ( 0.001031806589 )
-LABELS : N0Labels = 6 ( 6 ) N1Labels = 45 ( 45 ) N2Labels = 0 ( 0 ) TotalLabels = 51 ( 51 ) NameLabels = 11 ( 11 ) ColorLabels = 41 ( 41 ) LayerLabels = 21 ( 21 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 4 ( 4 )
-COLORS : Colors = BLUE1 GREEN RED YELLOW ( BLUE1 GREEN RED YELLOW )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 0 ( 0 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 4 -max_faults 0
+checkdoc "tpstat c" -max_warns 7 -max_faults 0
+checkxstat D_First -n0 6 -n1 45 -n2 0 -total 51 -withname 11 -withcolor 41 -withlayer 21 -centroid 0 -volume 0 -area 0 -colors { BLUE1 GREEN RED YELLOW } -nbcolors 4 -layers { 0 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 3 -shell 21 -face 197 -shape 1443
+checkstatshape res_1 -solid 3 -shell 21 -face 197 -freewire 0 -freeedge 0 -sharededge 573
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.255769437 -avg 0.001031806589]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 4 -max_faults 0
+checkdoc "tpstat c" -max_warns 7 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 32 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 6 -n1 45 -n2 0 -total 51 -withname 11 -withcolor 41 -withlayer 21 -centroid 0 -volume 0 -area 0 -nbcolors 4 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 6 -n1 45 -n2 0 -total 51 -withname 11 -withcolor 41 -withlayer 21 -centroid 0 -volume 0 -area 0 -colors { BLUE1 GREEN RED YELLOW } -nbcolors 4 -layers { 0 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 3 -shell 21 -face 197 -shape 1443 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 3 -shell 21 -face 197 -freewire 0 -freeedge 0 -sharededge 573 -max_solid 3 -max_shell 21 -max_face 197 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.255769437 -avg 0.0008786095241 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename bm4_id_conn_a.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 4 ( 4 ) Summary = 4 ( 4 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 3 ( 3 ) Shell = 3 ( 3 ) Face = 488 ( 488 ) Summary = 3553 ( 3553 )
-STATSHAPE : Solid = 57 ( 57 ) Shell = 57 ( 57 ) Face = 1890 ( 1890 ) FreeWire = 0 ( 0 ) FreeEdge = 2 ( 2 ) SharedEdge = 1439 ( 1439 )
-TOLERANCE : MaxTol = 1e-007 ( 1e-007 ) AvgTol = 1e-007 ( 1e-007 )
-LABELS : N0Labels = 7 ( 7 ) N1Labels = 46 ( 46 ) N2Labels = 0 ( 0 ) TotalLabels = 53 ( 53 ) NameLabels = 40 ( 40 ) ColorLabels = 16 ( 16 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 4 ( 4 )
-COLORS : Colors = DODGERBLUE1 GREEN RED YELLOW ( DODGERBLUE1 GREEN RED YELLOW )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+checkxstat D_First -n0 7 -n1 46 -n2 0 -total 53 -withname 40 -withcolor 16 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { DODGERBLUE1 GREEN RED YELLOW } -nbcolors 4 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 3 -shell 3 -face 488 -shape 3553
+checkstatshape res_1 -solid 57 -shell 57 -face 1890 -freewire 0 -freeedge 2 -sharededge 1439
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-007 -avg 1e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 7 -n1 46 -n2 0 -total 53 -withname 40 -withcolor 16 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 4 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 7 -n1 46 -n2 0 -total 53 -withname 40 -withcolor 16 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { DODGERBLUE1 GREEN RED YELLOW } -nbcolors 4 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 3 -shell 3 -face 488 -shape 3553 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 57 -shell 57 -face 1890 -freewire 0 -freeedge 2 -sharededge 1439 -max_solid 57 -max_shell 57 -max_face 1890 -max_freewire 0 -max_freeedge 2
+checkmaxtol res_2 -tol 1e-007 -avg 1e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename bm4_id_conn_b.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 3 ( 3 ) Shell = 3 ( 3 ) Face = 488 ( 488 ) Summary = 3553 ( 3553 )
-STATSHAPE : Solid = 57 ( 57 ) Shell = 57 ( 57 ) Face = 1890 ( 1890 ) FreeWire = 0 ( 0 ) FreeEdge = 2 ( 2 ) SharedEdge = 1439 ( 1439 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1.000100003e-007 ) AvgTol = 1.000093812e-007 ( 1.000093812e-007 )
-LABELS : N0Labels = 7 ( 7 ) N1Labels = 46 ( 46 ) N2Labels = 0 ( 0 ) TotalLabels = 53 ( 53 ) NameLabels = 40 ( 40 ) ColorLabels = 16 ( 16 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 4 ( 4 )
-COLORS : Colors = DODGERBLUE1 GREEN RED YELLOW ( DODGERBLUE1 GREEN RED YELLOW )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 7 -n1 46 -n2 0 -total 53 -withname 40 -withcolor 16 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { DODGERBLUE1 GREEN RED YELLOW } -nbcolors 4 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 3 -shell 3 -face 488 -shape 3553
+checkstatshape res_1 -solid 57 -shell 57 -face 1890 -freewire 0 -freeedge 2 -sharededge 1439
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-007 -avg 1.000093812e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 7 -n1 46 -n2 0 -total 53 -withname 40 -withcolor 16 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 4 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 7 -n1 46 -n2 0 -total 53 -withname 40 -withcolor 16 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { DODGERBLUE1 GREEN RED YELLOW } -nbcolors 4 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 3 -shell 3 -face 488 -shape 3553 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 57 -shell 57 -face 1890 -freewire 0 -freeedge 2 -sharededge 1439 -max_solid 57 -max_shell 57 -max_face 1890 -max_freewire 0 -max_freeedge 2
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.000093812e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
-
set filename bm4_id_punch_a.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 24 ( 20 ) Summary = 24 ( 20 )
-CHECKSHAPE : Wires = 4 ( 4 ) Faces = 4 ( 4 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 3 ( 3 ) Shell = 4 ( 4 ) Face = 182 ( 182 ) Summary = 1260 ( 1253 )
-STATSHAPE : Solid = 3 ( 3 ) Shell = 4 ( 4 ) Face = 182 ( 182 ) FreeWire = 0 ( 0 ) FreeEdge = 6 ( 6 ) SharedEdge = 508 ( 508 )
-TOLERANCE : MaxTol = 0.007713500664 ( 0.00997839292 ) AvgTol = 0.0007764946067 ( 0.0009476325736 )
-LABELS : N0Labels = 7 ( 7 ) N1Labels = 6 ( 6 ) N2Labels = 0 ( 0 ) TotalLabels = 13 ( 13 ) NameLabels = 13 ( 13 ) ColorLabels = 4 ( 4 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 3 ( 3 )
-COLORS : Colors = BLUE1 GREEN RED ( BLUE1 GREEN RED )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 18 -max_faults 0
+checkxstat D_First -n0 7 -n1 6 -n2 0 -total 13 -withname 13 -withcolor 4 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 GREEN RED } -nbcolors 3 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 4 -max_faces 4 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 3 -shell 4 -face 182 -shape 1253
+checkstatshape res_1 -solid 3 -shell 4 -face 182 -freewire 0 -freeedge 6 -sharededge 508
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.00997839292 -avg 0.0009476325736]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 18 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 14 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 7 -n1 6 -n2 0 -total 13 -withname 13 -withcolor 4 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 3 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 7 -n1 6 -n2 0 -total 13 -withname 13 -withcolor 4 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 GREEN RED } -nbcolors 3 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 4 -max_faces 4 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 4 -max_faces 4 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 3 -shell 4 -face 182 -shape 1260 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 3 -shell 4 -face 182 -freewire 0 -freeedge 6 -sharededge 508 -max_solid 3 -max_shell 4 -max_face 182 -max_freewire 0 -max_freeedge 6
+checkmaxtol res_2 -tol 0.007713500664 -avg 0.0007764946067 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename bm4_id_seal_a.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 38 ( 38 ) Summary = 38 ( 38 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 3 ( 3 ) Face = 48 ( 48 ) Summary = 244 ( 244 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 3 ( 3 ) Face = 48 ( 48 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 86 ( 86 )
-TOLERANCE : MaxTol = 1e-007 ( 1e-007 ) AvgTol = 1e-007 ( 1e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 44 ( 44 ) N2Labels = 0 ( 0 ) TotalLabels = 45 ( 45 ) NameLabels = 1 ( 1 ) ColorLabels = 45 ( 45 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 3 ( 3 )
-COLORS : Colors = DODGERBLUE2 RED YELLOW ( DODGERBLUE2 RED YELLOW )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 38 -max_faults 0
+checkxstat D_First -n0 1 -n1 44 -n2 0 -total 45 -withname 1 -withcolor 45 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { DODGERBLUE2 RED YELLOW } -nbcolors 3 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 3 -face 48 -shape 244
+checkstatshape res_1 -solid 1 -shell 3 -face 48 -freewire 0 -freeedge 0 -sharededge 86
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-007 -avg 1e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 38 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 38 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 44 -n2 0 -total 45 -withname 1 -withcolor 45 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 3 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 44 -n2 0 -total 45 -withname 1 -withcolor 45 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { DODGERBLUE2 RED YELLOW } -nbcolors 3 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 3 -face 48 -shape 244 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 3 -face 48 -freewire 0 -freeedge 0 -sharededge 86 -max_solid 1 -max_shell 3 -max_face 48 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1e-007 -avg 1e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename bm4_id_seal_b.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 38 ( 38 ) Summary = 38 ( 38 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 3 ( 3 ) Face = 48 ( 48 ) Summary = 244 ( 244 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 3 ( 3 ) Face = 48 ( 48 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 86 ( 86 )
-TOLERANCE : MaxTol = 1.00005e-007 ( 0.001600894468 ) AvgTol = 1.000014184e-007 ( 0.000181750437 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 44 ( 44 ) N2Labels = 0 ( 0 ) TotalLabels = 45 ( 45 ) NameLabels = 1 ( 1 ) ColorLabels = 45 ( 45 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 3 ( 3 )
-COLORS : Colors = DODGERBLUE2 RED YELLOW ( DODGERBLUE2 RED YELLOW )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 38 -max_faults 0
+checkxstat D_First -n0 1 -n1 44 -n2 0 -total 45 -withname 1 -withcolor 45 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { DODGERBLUE2 RED YELLOW } -nbcolors 3 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 3 -face 48 -shape 244
+checkstatshape res_1 -solid 1 -shell 3 -face 48 -freewire 0 -freeedge 0 -sharededge 86
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.001600894468 -avg 0.000181750437]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 38 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 38 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 44 -n2 0 -total 45 -withname 1 -withcolor 45 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 3 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 44 -n2 0 -total 45 -withname 1 -withcolor 45 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { DODGERBLUE2 RED YELLOW } -nbcolors 3 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 3 -face 48 -shape 244 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 3 -face 48 -freewire 0 -freeedge 0 -sharededge 86 -max_solid 1 -max_shell 3 -max_face 48 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.00005e-007 -avg 1.000014184e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename bm4_pe_conn_a.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 3 ( 3 ) Shell = 3 ( 3 ) Face = 492 ( 492 ) Summary = 3576 ( 3576 )
-STATSHAPE : Solid = 57 ( 57 ) Shell = 57 ( 57 ) Face = 1894 ( 1894 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 1450 ( 1450 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1.000100003e-007 ) AvgTol = 1.000093704e-007 ( 1.000093704e-007 )
-LABELS : N0Labels = 5 ( 5 ) N1Labels = 31 ( 31 ) N2Labels = 0 ( 0 ) TotalLabels = 36 ( 36 ) NameLabels = 36 ( 36 ) ColorLabels = 3 ( 3 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 3 ( 3 )
-COLORS : Colors = CYAN1 GREEN YELLOW ( CYAN1 GREEN YELLOW )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 5 -n1 31 -n2 0 -total 36 -withname 36 -withcolor 3 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { CYAN1 GREEN YELLOW } -nbcolors 3 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 3 -shell 3 -face 492 -shape 3576
+checkstatshape res_1 -solid 57 -shell 57 -face 1894 -freewire 0 -freeedge 0 -sharededge 1450
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-007 -avg 1.000093704e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 5 -n1 31 -n2 0 -total 36 -withname 36 -withcolor 3 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 3 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 5 -n1 31 -n2 0 -total 36 -withname 36 -withcolor 3 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { CYAN1 GREEN YELLOW } -nbcolors 3 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 3 -shell 3 -face 492 -shape 3576 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 57 -shell 57 -face 1894 -freewire 0 -freeedge 0 -sharededge 1450 -max_solid 57 -max_shell 57 -max_face 1894 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.000093704e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename bm4_pe_conn_b.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 3 ( 3 ) Shell = 3 ( 3 ) Face = 492 ( 492 ) Summary = 3576 ( 3576 )
-STATSHAPE : Solid = 57 ( 57 ) Shell = 57 ( 57 ) Face = 1894 ( 1894 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 1450 ( 1450 )
-TOLERANCE : MaxTol = 1e-007 ( 1e-007 ) AvgTol = 1e-007 ( 1e-007 )
-LABELS : N0Labels = 5 ( 5 ) N1Labels = 31 ( 31 ) N2Labels = 0 ( 0 ) TotalLabels = 36 ( 36 ) NameLabels = 36 ( 36 ) ColorLabels = 3 ( 3 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 3 ( 3 )
-COLORS : Colors = CYAN1 GREEN YELLOW ( CYAN1 GREEN YELLOW )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 5 -n1 31 -n2 0 -total 36 -withname 36 -withcolor 3 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { CYAN1 GREEN YELLOW } -nbcolors 3 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 3 -shell 3 -face 492 -shape 3576
+checkstatshape res_1 -solid 57 -shell 57 -face 1894 -freewire 0 -freeedge 0 -sharededge 1450
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-007 -avg 1e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 5 -n1 31 -n2 0 -total 36 -withname 36 -withcolor 3 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 3 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 5 -n1 31 -n2 0 -total 36 -withname 36 -withcolor 3 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { CYAN1 GREEN YELLOW } -nbcolors 3 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 3 -shell 3 -face 492 -shape 3576 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 57 -shell 57 -face 1894 -freewire 0 -freeedge 0 -sharededge 1450 -max_solid 57 -max_shell 57 -max_face 1894 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1e-007 -avg 1e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename bm4_pe_eye_a.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 2 ( 5 ) Summary = 2 ( 5 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 72 ( 72 ) Summary = 414 ( 414 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 72 ( 72 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 169 ( 169 )
-TOLERANCE : MaxTol = 3.740766812e-005 ( 0.0007556487161 ) AvgTol = 6.284473185e-006 ( 5.687360867e-005 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 5 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 72 -shape 414
+checkstatshape res_1 -solid 1 -shell 1 -face 72 -freewire 0 -freeedge 0 -sharededge 169
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.0007556487161 -avg 5.687360867e-005]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 5 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 72 -shape 414 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 72 -freewire 0 -freeedge 0 -sharededge 169 -max_solid 1 -max_shell 1 -max_face 72 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 3.740766812e-005 -avg 6.284473185e-006 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename bm4_pe_eye_b.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 2 ( 5 ) Summary = 2 ( 5 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 72 ( 72 ) Summary = 414 ( 414 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 72 ( 72 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 169 ( 169 )
-TOLERANCE : MaxTol = 7.338458197e-005 ( 0.0007556109356 ) AvgTol = 7.92475203e-006 ( 5.850755016e-005 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 5 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 72 -shape 414
+checkstatshape res_1 -solid 1 -shell 1 -face 72 -freewire 0 -freeedge 0 -sharededge 169
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.0007556109356 -avg 5.850755016e-005]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 5 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 72 -shape 414 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 72 -freewire 0 -freeedge 0 -sharededge 169 -max_solid 1 -max_shell 1 -max_face 72 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 7.338458197e-005 -avg 7.92475203e-006 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
-
set filename bm4_pe_punch_b.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 13 ( 0 ) Summary = 13 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 3 ( 3 ) Shell = 4 ( 4 ) Face = 182 ( 182 ) Summary = 1237 ( 1237 )
-STATSHAPE : Solid = 3 ( 3 ) Shell = 4 ( 4 ) Face = 182 ( 182 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 500 ( 500 )
-TOLERANCE : MaxTol = 0.009731472373 ( 0.01295381237 ) AvgTol = 0.0005901350758 ( 0.002429297443 )
-LABELS : N0Labels = 5 ( 5 ) N1Labels = 37 ( 37 ) N2Labels = 0 ( 0 ) TotalLabels = 42 ( 42 ) NameLabels = 9 ( 9 ) ColorLabels = 4 ( 4 ) LayerLabels = 33 ( 33 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 3 ( 3 )
-COLORS : Colors = BLUE1 GREEN RED ( BLUE1 GREEN RED )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = A_FLAECHEN_1 ( A_FLAECHEN_1 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 5 -n1 37 -n2 0 -total 42 -withname 9 -withcolor 4 -withlayer 33 -centroid 0 -volume 0 -area 0 -colors { BLUE1 GREEN RED } -nbcolors 3 -layers { "A_FLAECHEN_1" } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 3 -shell 4 -face 182 -shape 1237
+checkstatshape res_1 -solid 3 -shell 4 -face 182 -freewire 0 -freeedge 0 -sharededge 500
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.01295381237 -avg 0.002429297443]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 5 -n1 37 -n2 0 -total 42 -withname 9 -withcolor 4 -withlayer 33 -centroid 0 -volume 0 -area 0 -nbcolors 3 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 5 -n1 37 -n2 0 -total 42 -withname 9 -withcolor 4 -withlayer 33 -centroid 0 -volume 0 -area 0 -colors { BLUE1 GREEN RED } -nbcolors 3 -layers { "A_FLAECHEN_1" } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 3 -shell 4 -face 182 -shape 1237 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 3 -shell 4 -face 182 -freewire 0 -freeedge 0 -sharededge 500 -max_solid 3 -max_shell 4 -max_face 182 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.009731472373 -avg 0.0005901350758 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename bm4_sd_conn_a.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 3 ( 3 ) Shell = 3 ( 3 ) Face = 501 ( 501 ) Summary = 3639 ( 3639 )
-STATSHAPE : Solid = 57 ( 57 ) Shell = 57 ( 57 ) Face = 1912 ( 1912 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 1478 ( 1478 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1.000100003e-007 ) AvgTol = 1.000093718e-007 ( 1.000093718e-007 )
-LABELS : N0Labels = 5 ( 5 ) N1Labels = 32 ( 32 ) N2Labels = 0 ( 0 ) TotalLabels = 37 ( 37 ) NameLabels = 36 ( 36 ) ColorLabels = 4 ( 4 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 4 ( 4 )
-COLORS : Colors = GREEN MEDIUMTURQUOISE RED YELLOW ( GREEN MEDIUMTURQUOISE RED YELLOW )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 5 -n1 32 -n2 0 -total 37 -withname 36 -withcolor 4 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { GREEN MEDIUMTURQUOISE RED YELLOW } -nbcolors 4 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 3 -shell 3 -face 501 -shape 3639
+checkstatshape res_1 -solid 57 -shell 57 -face 1912 -freewire 0 -freeedge 0 -sharededge 1478
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-007 -avg 1.000093718e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 5 -n1 32 -n2 0 -total 37 -withname 36 -withcolor 4 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 4 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 5 -n1 32 -n2 0 -total 37 -withname 36 -withcolor 4 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { GREEN MEDIUMTURQUOISE RED YELLOW } -nbcolors 4 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 3 -shell 3 -face 501 -shape 3639 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 57 -shell 57 -face 1912 -freewire 0 -freeedge 0 -sharededge 1478 -max_solid 57 -max_shell 57 -max_face 1912 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.000093718e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename bm4_sd_conn_b.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 3 ( 3 ) Shell = 3 ( 3 ) Face = 501 ( 501 ) Summary = 3639 ( 3639 )
-STATSHAPE : Solid = 57 ( 57 ) Shell = 57 ( 57 ) Face = 1912 ( 1912 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 1478 ( 1478 )
-TOLERANCE : MaxTol = 1e-007 ( 1e-007 ) AvgTol = 1e-007 ( 1e-007 )
-LABELS : N0Labels = 5 ( 5 ) N1Labels = 32 ( 32 ) N2Labels = 0 ( 0 ) TotalLabels = 37 ( 37 ) NameLabels = 36 ( 36 ) ColorLabels = 4 ( 4 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 4 ( 4 )
-COLORS : Colors = GREEN MEDIUMTURQUOISE RED YELLOW ( GREEN MEDIUMTURQUOISE RED YELLOW )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 5 -n1 32 -n2 0 -total 37 -withname 36 -withcolor 4 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { GREEN MEDIUMTURQUOISE RED YELLOW } -nbcolors 4 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 3 -shell 3 -face 501 -shape 3639
+checkstatshape res_1 -solid 57 -shell 57 -face 1912 -freewire 0 -freeedge 0 -sharededge 1478
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-007 -avg 1e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 5 -n1 32 -n2 0 -total 37 -withname 36 -withcolor 4 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 4 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 5 -n1 32 -n2 0 -total 37 -withname 36 -withcolor 4 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { GREEN MEDIUMTURQUOISE RED YELLOW } -nbcolors 4 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 3 -shell 3 -face 501 -shape 3639 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 57 -shell 57 -face 1912 -freewire 0 -freeedge 0 -sharededge 1478 -max_solid 57 -max_shell 57 -max_face 1912 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1e-007 -avg 1e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename bm4_sd_conn_c.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 3 ( 3 ) Shell = 3 ( 3 ) Face = 501 ( 501 ) Summary = 3639 ( 3639 )
-STATSHAPE : Solid = 57 ( 57 ) Shell = 57 ( 57 ) Face = 1912 ( 1912 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 1478 ( 1478 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1.000100003e-007 ) AvgTol = 1.000093718e-007 ( 1.000093718e-007 )
-LABELS : N0Labels = 5 ( 5 ) N1Labels = 32 ( 32 ) N2Labels = 0 ( 0 ) TotalLabels = 37 ( 37 ) NameLabels = 36 ( 36 ) ColorLabels = 4 ( 4 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 4 ( 4 )
-COLORS : Colors = GREEN MEDIUMTURQUOISE RED YELLOW ( GREEN MEDIUMTURQUOISE RED YELLOW )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 5 -n1 32 -n2 0 -total 37 -withname 36 -withcolor 4 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { GREEN MEDIUMTURQUOISE RED YELLOW } -nbcolors 4 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 3 -shell 3 -face 501 -shape 3639
+checkstatshape res_1 -solid 57 -shell 57 -face 1912 -freewire 0 -freeedge 0 -sharededge 1478
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-007 -avg 1.000093718e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 5 -n1 32 -n2 0 -total 37 -withname 36 -withcolor 4 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 4 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 5 -n1 32 -n2 0 -total 37 -withname 36 -withcolor 4 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { GREEN MEDIUMTURQUOISE RED YELLOW } -nbcolors 4 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 3 -shell 3 -face 501 -shape 3639 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 57 -shell 57 -face 1912 -freewire 0 -freeedge 0 -sharededge 1478 -max_solid 57 -max_shell 57 -max_face 1912 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.000093718e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename bm4_sd_eye_b.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 82 ( 82 ) Summary = 476 ( 476 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 82 ( 82 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 199 ( 199 )
-TOLERANCE : MaxTol = 7.174253459e-007 ( 7.174254492e-007 ) AvgTol = 2.469495396e-007 ( 2.469495327e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = MATRAGRAY ( MATRAGRAY )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { MATRAGRAY } -nbcolors 1 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 82 -shape 476
+checkstatshape res_1 -solid 1 -shell 1 -face 82 -freewire 0 -freeedge 0 -sharededge 199
+set max_tol_res_1 [checkmaxtol res_1 -tol 7.174254492e-007 -avg 2.469495327e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { MATRAGRAY } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 82 -shape 476 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 82 -freewire 0 -freeedge 0 -sharededge 199 -max_solid 1 -max_shell 1 -max_face 82 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 7.174253459e-007 -avg 2.469495396e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename bm4_sd_eye_d.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 82 ( 82 ) Summary = 476 ( 476 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 82 ( 82 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 199 ( 199 )
-TOLERANCE : MaxTol = 7.174253459e-007 ( 7.174254492e-007 ) AvgTol = 2.54544656e-007 ( 2.545445715e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = MATRAGRAY ( MATRAGRAY )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { MATRAGRAY } -nbcolors 1 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 82 -shape 476
+checkstatshape res_1 -solid 1 -shell 1 -face 82 -freewire 0 -freeedge 0 -sharededge 199
+set max_tol_res_1 [checkmaxtol res_1 -tol 7.174254492e-007 -avg 2.545445715e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { MATRAGRAY } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 82 -shape 476 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 82 -freewire 0 -freeedge 0 -sharededge 199 -max_solid 1 -max_shell 1 -max_face 82 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 7.174253459e-007 -avg 2.54544656e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
-
set filename bm4_sd_punch_a.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 10 ( 0 ) Summary = 10 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 3 ( 3 ) Shell = 4 ( 4 ) Face = 204 ( 204 ) Summary = 1367 ( 1367 )
-STATSHAPE : Solid = 3 ( 3 ) Shell = 4 ( 4 ) Face = 204 ( 204 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 554 ( 554 )
-TOLERANCE : MaxTol = 6.149434256e-007 ( 6.149442686e-007 ) AvgTol = 1.42528201e-007 ( 1.425280432e-007 )
-LABELS : N0Labels = 5 ( 5 ) N1Labels = 41 ( 41 ) N2Labels = 0 ( 0 ) TotalLabels = 46 ( 46 ) NameLabels = 9 ( 9 ) ColorLabels = 41 ( 41 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 3 ( 3 )
-COLORS : Colors = BLUE1 GREEN RED ( BLUE1 GREEN RED )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 5 -n1 41 -n2 0 -total 46 -withname 9 -withcolor 41 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 GREEN RED } -nbcolors 3 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 3 -shell 4 -face 204 -shape 1367
+checkstatshape res_1 -solid 3 -shell 4 -face 204 -freewire 0 -freeedge 0 -sharededge 554
+set max_tol_res_1 [checkmaxtol res_1 -tol 6.149442686e-007 -avg 1.425280432e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 10 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 5 -n1 41 -n2 0 -total 46 -withname 9 -withcolor 41 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 3 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 5 -n1 41 -n2 0 -total 46 -withname 9 -withcolor 41 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 GREEN RED } -nbcolors 3 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 3 -shell 4 -face 204 -shape 1367 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 3 -shell 4 -face 204 -freewire 0 -freeedge 0 -sharededge 554 -max_solid 3 -max_shell 4 -max_face 204 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 6.149434256e-007 -avg 1.42528201e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
-
set filename bm4_sd_punch_b.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 10 ( 0 ) Summary = 10 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 3 ( 3 ) Shell = 4 ( 4 ) Face = 204 ( 204 ) Summary = 1367 ( 1367 )
-STATSHAPE : Solid = 3 ( 3 ) Shell = 4 ( 4 ) Face = 204 ( 204 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 554 ( 554 )
-TOLERANCE : MaxTol = 6.188728122e-007 ( 6.18873692e-007 ) AvgTol = 1.426129355e-007 ( 1.426128757e-007 )
-LABELS : N0Labels = 5 ( 5 ) N1Labels = 41 ( 41 ) N2Labels = 0 ( 0 ) TotalLabels = 46 ( 46 ) NameLabels = 9 ( 9 ) ColorLabels = 41 ( 41 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 3 ( 3 )
-COLORS : Colors = BLUE1 GREEN RED ( BLUE1 GREEN RED )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 5 -n1 41 -n2 0 -total 46 -withname 9 -withcolor 41 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 GREEN RED } -nbcolors 3 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 3 -shell 4 -face 204 -shape 1367
+checkstatshape res_1 -solid 3 -shell 4 -face 204 -freewire 0 -freeedge 0 -sharededge 554
+set max_tol_res_1 [checkmaxtol res_1 -tol 6.18873692e-007 -avg 1.426128757e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 10 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 5 -n1 41 -n2 0 -total 46 -withname 9 -withcolor 41 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 3 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 5 -n1 41 -n2 0 -total 46 -withname 9 -withcolor 41 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 GREEN RED } -nbcolors 3 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 3 -shell 4 -face 204 -shape 1367 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 3 -shell 4 -face 204 -freewire 0 -freeedge 0 -sharededge 554 -max_solid 3 -max_shell 4 -max_face 204 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 6.188728122e-007 -avg 1.426129355e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename bm4_tc_conn.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 164 ) Summary = 0 ( 164 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 4 ( 4 ) Shell = 4 ( 4 ) Face = 674 ( 674 ) Summary = 4906 ( 4906 )
-STATSHAPE : Solid = 51 ( 51 ) Shell = 51 ( 51 ) Face = 1708 ( 1708 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 2008 ( 2008 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1.000100003e-007 ) AvgTol = 1.000093711e-007 ( 1.000093711e-007 )
-LABELS : N0Labels = 8 ( 8 ) N1Labels = 54 ( 54 ) N2Labels = 0 ( 0 ) TotalLabels = 62 ( 62 ) NameLabels = 62 ( 62 ) ColorLabels = 0 ( 0 ) LayerLabels = 4 ( 4 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 3 ( 3 )
-LAYERS : Layers = 001 005 010 ( 001 005 010 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 164 -max_faults 0
+checkxstat D_First -n0 8 -n1 54 -n2 0 -total 62 -withname 62 -withcolor 0 -withlayer 4 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { 001 005 010 } -nblayers 3
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 4 -shell 4 -face 674 -shape 4906
+checkstatshape res_1 -solid 51 -shell 51 -face 1708 -freewire 0 -freeedge 0 -sharededge 2008
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.000100003e-007 -avg 1.000093711e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 164 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 8 -n1 54 -n2 0 -total 62 -withname 62 -withcolor 0 -withlayer 4 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 3
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 8 -n1 54 -n2 0 -total 62 -withname 62 -withcolor 0 -withlayer 4 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { 001 005 010 } -nblayers 3
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 4 -shell 4 -face 674 -shape 4906 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 51 -shell 51 -face 1708 -freewire 0 -freeedge 0 -sharededge 2008 -max_solid 51 -max_shell 51 -max_face 1708 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.000093711e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename bm4_ug_conn_a.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 4 ) Summary = 0 ( 4 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 3 ( 3 ) Shell = 3 ( 3 ) Face = 497 ( 497 ) Summary = 3615 ( 3615 )
-STATSHAPE : Solid = 57 ( 57 ) Shell = 57 ( 57 ) Face = 1908 ( 1908 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 1468 ( 1468 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1e-005 ) AvgTol = 1.000093825e-007 ( 1.175359303e-007 )
-LABELS : N0Labels = 5 ( 5 ) N1Labels = 31 ( 31 ) N2Labels = 0 ( 0 ) TotalLabels = 36 ( 36 ) NameLabels = 36 ( 36 ) ColorLabels = 3 ( 3 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = MEDIUMSEAGREEN YELLOW ( MEDIUMSEAGREEN YELLOW )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+checkxstat D_First -n0 5 -n1 31 -n2 0 -total 36 -withname 36 -withcolor 3 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { MEDIUMSEAGREEN YELLOW } -nbcolors 2 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 3 -shell 3 -face 497 -shape 3615
+checkstatshape res_1 -solid 57 -shell 57 -face 1908 -freewire 0 -freeedge 0 -sharededge 1468
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-005 -avg 1.175359303e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 5 -n1 31 -n2 0 -total 36 -withname 36 -withcolor 3 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 2 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 5 -n1 31 -n2 0 -total 36 -withname 36 -withcolor 3 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { MEDIUMSEAGREEN YELLOW } -nbcolors 2 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 3 -shell 3 -face 497 -shape 3615 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 57 -shell 57 -face 1908 -freewire 0 -freeedge 0 -sharededge 1468 -max_solid 57 -max_shell 57 -max_face 1908 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.000093825e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename bm4_ug_conn_b.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 4 ) Summary = 0 ( 4 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 3 ( 3 ) Shell = 3 ( 3 ) Face = 497 ( 497 ) Summary = 3615 ( 3615 )
-STATSHAPE : Solid = 57 ( 57 ) Shell = 57 ( 57 ) Face = 1908 ( 1908 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 1468 ( 1468 )
-TOLERANCE : MaxTol = 1.000100003e-007 ( 1e-005 ) AvgTol = 1.000093825e-007 ( 1.175359303e-007 )
-LABELS : N0Labels = 5 ( 5 ) N1Labels = 31 ( 31 ) N2Labels = 0 ( 0 ) TotalLabels = 36 ( 36 ) NameLabels = 36 ( 36 ) ColorLabels = 3 ( 3 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = MEDIUMSEAGREEN YELLOW ( MEDIUMSEAGREEN YELLOW )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+checkxstat D_First -n0 5 -n1 31 -n2 0 -total 36 -withname 36 -withcolor 3 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { MEDIUMSEAGREEN YELLOW } -nbcolors 2 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 3 -shell 3 -face 497 -shape 3615
+checkstatshape res_1 -solid 57 -shell 57 -face 1908 -freewire 0 -freeedge 0 -sharededge 1468
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-005 -avg 1.175359303e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 5 -n1 31 -n2 0 -total 36 -withname 36 -withcolor 3 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 2 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 5 -n1 31 -n2 0 -total 36 -withname 36 -withcolor 3 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { MEDIUMSEAGREEN YELLOW } -nbcolors 2 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 3 -shell 3 -face 497 -shape 3615 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 57 -shell 57 -face 1908 -freewire 0 -freeedge 0 -sharededge 1468 -max_solid 57 -max_shell 57 -max_face 1908 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.000100003e-007 -avg 1.000093825e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename boutchauf.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 2 ( 2 ) Face = 94 ( 94 ) Summary = 513 ( 513 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 2 ( 2 ) Face = 94 ( 94 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 206 ( 206 )
-TOLERANCE : MaxTol = 0.09976786928 ( 0.1274525326 ) AvgTol = 0.03628698111 ( 0.04204721124 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 2 -face 94 -shape 513
+checkstatshape res_1 -solid 0 -shell 2 -face 94 -freewire 0 -freeedge 0 -sharededge 206
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.1274525326 -avg 0.04204721124]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 2 -face 94 -shape 513 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 2 -face 94 -freewire 0 -freeedge 0 -sharededge 206 -max_solid 0 -max_shell 2 -max_face 94 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.09976786928 -avg 0.03628698111 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj10_b2-pe-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 3 ( 9 ) Summary = 3 ( 9 )
-CHECKSHAPE : Wires = 1 ( 1 ) Faces = 1 ( 1 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 252 ( 252 ) Summary = 1622 ( 1622 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 252 ( 252 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 673 ( 673 )
-TOLERANCE : MaxTol = 0.003900261304 ( 0.007833404346 ) AvgTol = 9.450808397e-005 ( 0.0001357380201 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 1 ( 1 ) Volume = 1 ( 1 ) Area = 1 ( 1 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = WHITE ( WHITE )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 9 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 1 -volume 1 -area 1 -colors { WHITE } -nbcolors 1 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 1 -max_faces 1 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 252 -shape 1622
+checkstatshape res_1 -solid 1 -shell 1 -face 252 -freewire 0 -freeedge 0 -sharededge 673
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.007833404346 -avg 0.0001357380201]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 9 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 1 -volume 1 -area 1 -nbcolors 1 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 1 -volume 1 -area 1 -colors { WHITE } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 1 -max_faces 1 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 1 -max_faces 1 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 252 -shape 1622 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 252 -freewire 0 -freeedge 0 -sharededge 673 -max_solid 1 -max_shell 1 -max_face 252 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.003900261304 -avg 9.450808397e-005 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename ca_exhaust.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 10 ( 12 ) Summary = 10 ( 12 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 32 ( 32 ) Summary = 194 ( 194 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 32 ( 32 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 74 ( 74 )
-TOLERANCE : MaxTol = 0.009164270171 ( 0.009164270166 ) AvgTol = 0.00113814971 ( 0.001138150558 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 12 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 32 -shape 194
+checkstatshape res_1 -solid 1 -shell 1 -face 32 -freewire 0 -freeedge 0 -sharededge 74
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.009164270166 -avg 0.001138150558]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 12 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 10 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 32 -shape 194 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 32 -freewire 0 -freeedge 0 -sharededge 74 -max_solid 1 -max_shell 1 -max_face 32 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.009164270171 -avg 0.00113814971 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename clamp.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 4 ( 8 ) Summary = 4 ( 8 )
-CHECKSHAPE : Wires = 2 ( 2 ) Faces = 2 ( 2 ) Shells = 1 ( 1 ) Solids = 1 ( 1 )
-NBSHAPES : Solid = 4 ( 4 ) Shell = 4 ( 4 ) Face = 40 ( 40 ) Summary = 263 ( 263 )
-STATSHAPE : Solid = 4 ( 4 ) Shell = 4 ( 4 ) Face = 40 ( 40 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 98 ( 98 )
-TOLERANCE : MaxTol = 0.7571968817 ( 0.757178949 ) AvgTol = 0.04326711711 ( 0.04326805656 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 4 ( 4 ) N2Labels = 0 ( 0 ) TotalLabels = 5 ( 5 ) NameLabels = 1 ( 1 ) ColorLabels = 4 ( 4 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = BLUE1 MAGENTA1 ( BLUE1 MAGENTA1 )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 8 -max_faults 0
+checkxstat D_First -n0 1 -n1 4 -n2 0 -total 5 -withname 1 -withcolor 4 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 MAGENTA1 } -nbcolors 2 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 2 -max_faces 2 -max_shells 1 -max_solids 1
+checknbshapes res_1 -solid 4 -shell 4 -face 40 -shape 263
+checkstatshape res_1 -solid 4 -shell 4 -face 40 -freewire 0 -freeedge 0 -sharededge 98
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.757178949 -avg 0.04326805656]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 8 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 4 -n2 0 -total 5 -withname 1 -withcolor 4 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 2 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 4 -n2 0 -total 5 -withname 1 -withcolor 4 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 MAGENTA1 } -nbcolors 2 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 2 -max_faces 2 -max_shells 1 -max_solids 1
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 2 -max_faces 2 -max_shells 1 -max_solids 1
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 4 -shell 4 -face 40 -shape 263 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 4 -shell 4 -face 40 -freewire 0 -freeedge 0 -sharededge 98 -max_solid 4 -max_shell 4 -max_face 40 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.7571968817 -avg 0.04326711711 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename coquille.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 4 ( 4 ) Summary = 4 ( 4 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 93 ( 93 ) Summary = 733 ( 733 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 93 ( 93 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 316 ( 316 )
-TOLERANCE : MaxTol = 0.08340213295 ( 0.1424166326 ) AvgTol = 0.02513534544 ( 0.03572527521 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 1 -face 93 -shape 733
+checkstatshape res_1 -solid 0 -shell 1 -face 93 -freewire 0 -freeedge 0 -sharededge 316
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.1424166326 -avg 0.03572527521]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 1 -face 93 -shape 733 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 1 -face 93 -freewire 0 -freeedge 0 -sharededge 316 -max_solid 0 -max_shell 1 -max_face 93 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.08340213295 -avg 0.02513534544 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename ct_soapbox-A.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 25 ( 32 ) Summary = 25 ( 32 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 108 ( 108 ) Summary = 674 ( 669 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 108 ( 108 ) FreeWire = 0 ( 0 ) FreeEdge = 5 ( 5 ) SharedEdge = 275 ( 275 )
-TOLERANCE : MaxTol = 0.1162538812 ( 0.1162538812 ) AvgTol = 0.007933501527 ( 0.0113796647 )
-LABELS : N0Labels = 3 ( 3 ) N1Labels = 7 ( 7 ) N2Labels = 0 ( 0 ) TotalLabels = 10 ( 10 ) NameLabels = 5 ( 5 ) ColorLabels = 6 ( 6 ) LayerLabels = 6 ( 6 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = GREEN4 WHITE ( GREEN4 WHITE )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 0 ( 0 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 32 -max_faults 0
+checkxstat D_First -n0 3 -n1 7 -n2 0 -total 10 -withname 5 -withcolor 6 -withlayer 6 -centroid 0 -volume 0 -area 0 -colors { GREEN4 WHITE } -nbcolors 2 -layers { 0 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 108 -shape 669
+checkstatshape res_1 -solid 1 -shell 1 -face 108 -freewire 0 -freeedge 5 -sharededge 275
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.1162538812 -avg 0.0113796647]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 32 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 21 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3 -n1 7 -n2 0 -total 10 -withname 5 -withcolor 6 -withlayer 6 -centroid 0 -volume 0 -area 0 -nbcolors 2 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 7 -n2 0 -total 10 -withname 5 -withcolor 6 -withlayer 6 -centroid 0 -volume 0 -area 0 -colors { GREEN4 WHITE } -nbcolors 2 -layers { 0 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 108 -shape 674 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 108 -freewire 0 -freeedge 5 -sharededge 275 -max_solid 1 -max_shell 1 -max_face 108 -max_freewire 0 -max_freeedge 5
+checkmaxtol res_2 -tol 0.1162538812 -avg 0.007933501527 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj12_b3-ug-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 2 ( 66 ) Summary = 2 ( 66 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 696 ( 696 ) Summary = 4636 ( 4636 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 696 ( 696 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 1943 ( 1943 )
-TOLERANCE : MaxTol = 0.02098499877 ( 0.09930380124 ) AvgTol = 0.002124131329 ( 0.006931207463 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 1 ( 1 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = MEDIUMSEAGREEN ( MEDIUMSEAGREEN )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 31 ( 31 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 66 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { MEDIUMSEAGREEN } -nbcolors 1 -layers { 31 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 696 -shape 4636
+checkstatshape res_1 -solid 1 -shell 1 -face 696 -freewire 0 -freeedge 0 -sharededge 1943
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.09930380124 -avg 0.006931207463]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 66 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { MEDIUMSEAGREEN } -nbcolors 1 -layers { 31 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 696 -shape 4636 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 696 -freewire 0 -freeedge 0 -sharededge 1943 -max_solid 1 -max_shell 1 -max_face 696 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.02098499877 -avg 0.002124131329 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
-
set filename db_turbine-A.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 12 ( 7 ) Summary = 12 ( 7 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 40 ( 40 ) Summary = 231 ( 231 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 40 ( 40 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 99 ( 99 )
-TOLERANCE : MaxTol = 0.02294322294 ( 0.03059350475 ) AvgTol = 0.003590149917 ( 0.004379826317 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 1 ( 1 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 0 ( { 0} )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 7 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { " 0" } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 1 -face 40 -shape 231
+checkstatshape res_1 -solid 0 -shell 1 -face 40 -freewire 0 -freeedge 0 -sharededge 99
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.03059350475 -avg 0.004379826317]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 7 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 12 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 1 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { 0 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 1 -face 40 -shape 231 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 1 -face 40 -freewire 0 -freeedge 0 -sharededge 99 -max_solid 0 -max_shell 1 -max_face 40 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.02294322294 -avg 0.003590149917 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
-
set filename db_turbine-B.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 26 ( 0 ) Summary = 26 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 40 ( 40 ) Face = 40 ( 40 ) Summary = 465 ( 304 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 40 ( 40 ) Face = 40 ( 40 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 176 ( 132 )
-TOLERANCE : MaxTol = 0.0229434463 ( 0.0229434463 ) AvgTol = 0.002472120726 ( 0.004479791532 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 80 ( 80 ) N2Labels = 0 ( 0 ) TotalLabels = 81 ( 81 ) NameLabels = 1 ( 1 ) ColorLabels = 40 ( 40 ) LayerLabels = 40 ( 40 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = WHITE ( WHITE )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 0 ( { 0} )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 80 -n2 0 -total 81 -withname 1 -withcolor 40 -withlayer 40 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { " 0" } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 40 -face 40 -shape 304
+checkstatshape res_1 -solid 0 -shell 40 -face 40 -freewire 0 -freeedge 0 -sharededge 132
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.0229434463 -avg 0.004479791532]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 26 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 80 -n2 0 -total 81 -withname 1 -withcolor 40 -withlayer 40 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 80 -n2 0 -total 81 -withname 1 -withcolor 40 -withlayer 40 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { 0 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 40 -face 40 -shape 465 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 40 -face 40 -freewire 0 -freeedge 0 -sharededge 176 -max_solid 0 -max_shell 40 -max_face 40 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.0229434463 -avg 0.002472120726 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
-
set filename demo2.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 3 ( 0 ) Summary = 3 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 435 ( 435 ) Summary = 4899 ( 4899 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 435 ( 435 ) FreeWire = 0 ( 548 ) FreeEdge = 548 ( 548 ) SharedEdge = 1677 ( 1677 )
-TOLERANCE : MaxTol = 0.0005349158543 ( 0.0008075170146 ) AvgTol = 1.728722228e-005 ( 2.28569033e-005 )
-LABELS : N0Labels = 3 ( 3 ) N1Labels = 2 ( 2 ) N2Labels = 0 ( 0 ) TotalLabels = 5 ( 5 ) NameLabels = 5 ( 5 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 4359 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 435 -shape 4899
+checkstatshape res_1 -solid 1 -shell 1 -face 435 -freewire 548 -freeedge 548 -sharededge 1677
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.0008075170146 -avg 2.28569033e-005]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 4359 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 3 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 435 -shape 4899 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 435 -freewire 0 -freeedge 548 -sharededge 1677 -max_solid 1 -max_shell 1 -max_face 435 -max_freewire 548 -max_freeedge 548
+checkmaxtol res_2 -tol 0.0005349158543 -avg 1.728722228e-005 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename ec_soapbox-A.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 86 ( 86 ) Summary = 516 ( 516 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 86 ( 86 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 209 ( 209 )
-TOLERANCE : MaxTol = 0.001409420564 ( 0.007700248501 ) AvgTol = 4.939642153e-005 ( 0.0008378957883 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 86 -shape 516
+checkstatshape res_1 -solid 1 -shell 1 -face 86 -freewire 0 -freeedge 0 -sharededge 209
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.007700248501 -avg 0.0008378957883]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 86 -shape 516 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 86 -freewire 0 -freeedge 0 -sharededge 209 -max_solid 1 -max_shell 1 -max_face 86 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.001409420564 -avg 4.939642153e-005 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
-
set filename ec_turbine-A.stp
-set ref_data {
-DATA : Faulties = 0 ( 7 ) Warnings = 0 ( 0 ) Summary = 0 ( 7 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 3 ( 1 ) Summary = 3 ( 1 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 53 ( 53 ) Summary = 315 ( 314 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 53 ( 53 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 131 ( 130 )
-TOLERANCE : MaxTol = 3.83146359e-05 ( 4.239045465e-05 ) AvgTol = 6.991592063e-06 ( 7.802264042e-06 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 7
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 1 -face 53 -shape 314
+checkstatshape res_1 -solid 0 -shell 1 -face 53 -freewire 0 -freeedge 0 -sharededge 130
+set max_tol_res_1 [checkmaxtol res_1 -tol 4.239045465e-05 -avg 7.802264042e-06]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 7
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 3 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 1 -face 53 -shape 315 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 1 -face 53 -freewire 0 -freeedge 0 -sharededge 131 -max_solid 0 -max_shell 1 -max_face 53 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 3.83146359e-05 -avg 6.991592063e-06 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
puts "TODO CR23096 ALL: NBSHAPES : Faulty"
-
set filename gbit2tsec.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 54 ( 37 ) Summary = 54 ( 37 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 13 ( 13 ) Face = 111 ( 111 ) Summary = 989 ( 990 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 13 ( 13 ) Face = 111 ( 111 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 434 ( 434 )
-TOLERANCE : MaxTol = 0.004790846572 ( 0.004790846572 ) AvgTol = 0.0004048577679 ( 0.0004618876822 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 37 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 13 -face 111 -shape 990
+checkstatshape res_1 -solid 0 -shell 13 -face 111 -freewire 0 -freeedge 0 -sharededge 434
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.004790846572 -avg 0.0004618876822]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 37 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 54 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 13 -face 111 -shape 989 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 13 -face 111 -freewire 0 -freeedge 0 -sharededge 434 -max_solid 0 -max_shell 13 -max_face 111 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.004790846572 -avg 0.0004048577679 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename gbitcomp.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 0 ( 0 ) Summary = 12773 ( 10349 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 0 ( 0 ) FreeWire = 0 ( 0 ) FreeEdge = 3232 ( 3232 ) SharedEdge = 3232 ( 3232 )
-TOLERANCE : MaxTol = 1e-007 ( 1e-007 ) AvgTol = 1e-007 ( 1e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 0 -shape 10349
+checkstatshape res_1 -solid 0 -shell 0 -face 0 -freewire 0 -freeedge 3232 -sharededge 3232
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-007 -avg 1e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 0 -face 0 -shape 12773 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 0 -freewire 0 -freeedge 3232 -sharededge 3232 -max_solid 0 -max_shell 0 -max_face 0 -max_freewire 0 -max_freeedge 3232
+checkmaxtol res_2 -tol 1e-007 -avg 1e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
-
set filename gbpffacrad.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 24 ( 12 ) Summary = 24 ( 12 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 81 ( 81 ) Summary = 545 ( 545 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 81 ( 81 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 234 ( 234 )
-TOLERANCE : MaxTol = 0.05742720805 ( 0.1569502804 ) AvgTol = 0.01488383767 ( 0.03301530791 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 12 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 1 -face 81 -shape 545
+checkstatshape res_1 -solid 0 -shell 1 -face 81 -freewire 0 -freeedge 0 -sharededge 234
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.1569502804 -avg 0.03301530791]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 12 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 24 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 1 -face 81 -shape 545 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 1 -face 81 -freewire 0 -freeedge 0 -sharededge 234 -max_solid 0 -max_shell 1 -max_face 81 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.05742720805 -avg 0.01488383767 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
-
set filename id_exhaust-A.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 8 ( 3 ) Summary = 8 ( 3 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 273 ( 273 ) Summary = 1611 ( 1585 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 273 ( 273 ) FreeWire = 0 ( 0 ) FreeEdge = 25 ( 25 ) SharedEdge = 634 ( 634 )
-TOLERANCE : MaxTol = 0.009439063586 ( 0.009890486094 ) AvgTol = 0.001469521991 ( 0.001693442157 )
-LABELS : N0Labels = 3 ( 3 ) N1Labels = 400 ( 400 ) N2Labels = 0 ( 0 ) TotalLabels = 403 ( 403 ) NameLabels = 5 ( 5 ) ColorLabels = 399 ( 399 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 3 ( 3 )
-COLORS : Colors = ORANGE ORANGERED RED ( ORANGE ORANGERED RED )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 3 -max_faults 0
+checkxstat D_First -n0 3 -n1 400 -n2 0 -total 403 -withname 5 -withcolor 399 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { ORANGE ORANGERED RED } -nbcolors 3 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 273 -shape 1585
+checkstatshape res_1 -solid 1 -shell 1 -face 273 -freewire 0 -freeedge 25 -sharededge 634
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.009890486094 -avg 0.001693442157]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 3 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 8 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3 -n1 400 -n2 0 -total 403 -withname 5 -withcolor 399 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 3 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 400 -n2 0 -total 403 -withname 5 -withcolor 399 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { ORANGE ORANGERED RED } -nbcolors 3 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 273 -shape 1611 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 273 -freewire 0 -freeedge 25 -sharededge 634 -max_solid 1 -max_shell 1 -max_face 273 -max_freewire 0 -max_freeedge 25
+checkmaxtol res_2 -tol 0.009439063586 -avg 0.001469521991 -max_tol ${max_tol_res_1}
+
puts "TODO OCC12345 ALL: TPSTAT : Faulty"
-# !!!! This file is generated automatically, do not edit manually! See end script
+set filename id_exhaust-B.stp
-set filename id_exhaust-B.stp
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+checkxstat D_First -n0 3 -n1 400 -n2 0 -total 403 -withname 5 -withcolor 399 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { ORANGE ORANGERED RED } -nbcolors 3 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 273 -shape 1585
+checkstatshape res_1 -solid 1 -shell 1 -face 273 -freewire 0 -freeedge 25 -sharededge 634
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.009890486094 -avg 0.001696115857]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 5 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3 -n1 400 -n2 0 -total 403 -withname 5 -withcolor 399 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 3 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 400 -n2 0 -total 403 -withname 5 -withcolor 399 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { ORANGE ORANGERED RED } -nbcolors 3 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 273 -shape 1611 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 273 -freewire 0 -freeedge 25 -sharededge 634 -max_solid 1 -max_shell 1 -max_face 273 -max_freewire 0 -max_freeedge 25
+checkmaxtol res_2 -tol 0.009439063586 -avg 0.001476519142 -max_tol ${max_tol_res_1}
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 5 ( 1 ) Summary = 5 ( 1 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 273 ( 273 ) Summary = 1611 ( 1585 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 273 ( 273 ) FreeWire = 0 ( 0 ) FreeEdge = 25 ( 25 ) SharedEdge = 634 ( 634 )
-TOLERANCE : MaxTol = 0.009439063586 ( 0.009890486094 ) AvgTol = 0.001476519142 ( 0.001696115857 )
-LABELS : N0Labels = 3 ( 3 ) N1Labels = 400 ( 400 ) N2Labels = 0 ( 0 ) TotalLabels = 403 ( 403 ) NameLabels = 5 ( 5 ) ColorLabels = 399 ( 399 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 3 ( 3 )
-COLORS : Colors = ORANGE ORANGERED RED ( ORANGE ORANGERED RED )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
-
set filename id_soapbox-A.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 19 ( 6 ) Summary = 19 ( 6 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 104 ( 104 ) Summary = 752 ( 748 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 104 ( 104 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 266 ( 262 )
-TOLERANCE : MaxTol = 0.006923751402 ( 0.009036344633 ) AvgTol = 0.001364850239 ( 0.001796406712 )
-LABELS : N0Labels = 3 ( 3 ) N1Labels = 2 ( 2 ) N2Labels = 0 ( 0 ) TotalLabels = 5 ( 5 ) NameLabels = 5 ( 5 ) ColorLabels = 1 ( 1 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = ORANGE ( ORANGE )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 6 -max_faults 0
+checkxstat D_First -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { ORANGE } -nbcolors 1 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 104 -shape 748
+checkstatshape res_1 -solid 1 -shell 1 -face 104 -freewire 0 -freeedge 0 -sharededge 262
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.009036344633 -avg 0.001796406712]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 6 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 19 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { ORANGE } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 104 -shape 752 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 104 -freewire 0 -freeedge 0 -sharededge 266 -max_solid 1 -max_shell 1 -max_face 104 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.006923751402 -avg 0.001364850239 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
-
set filename id_soapbox-B.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 20 ( 6 ) Summary = 20 ( 6 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 104 ( 104 ) Summary = 752 ( 748 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 104 ( 104 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 266 ( 262 )
-TOLERANCE : MaxTol = 0.006923751402 ( 0.007596378198 ) AvgTol = 0.001448520746 ( 0.001714495453 )
-LABELS : N0Labels = 3 ( 3 ) N1Labels = 2 ( 2 ) N2Labels = 0 ( 0 ) TotalLabels = 5 ( 5 ) NameLabels = 5 ( 5 ) ColorLabels = 1 ( 1 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = ORANGE ( ORANGE )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 6 -max_faults 0
+checkxstat D_First -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { ORANGE } -nbcolors 1 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 104 -shape 748
+checkstatshape res_1 -solid 1 -shell 1 -face 104 -freewire 0 -freeedge 0 -sharededge 262
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.007596378198 -avg 0.001714495453]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 6 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 21 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { ORANGE } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 104 -shape 752 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 104 -freewire 0 -freeedge 0 -sharededge 266 -max_solid 1 -max_shell 1 -max_face 104 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.006923751402 -avg 0.001448520746 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
-
set filename ie_exhaust-C.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 18 ( 16 ) Summary = 18 ( 16 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 64 ( 64 ) Summary = 378 ( 378 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 64 ( 64 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 150 ( 150 )
-TOLERANCE : MaxTol = 0.01528794944 ( 0.01667849336 ) AvgTol = 0.003242584981 ( 0.00344779789 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 16 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 64 -shape 378
+checkstatshape res_1 -solid 1 -shell 1 -face 64 -freewire 0 -freeedge 0 -sharededge 150
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.01667849336 -avg 0.00344779789]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 16 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 18 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 64 -shape 378 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 64 -freewire 0 -freeedge 0 -sharededge 150 -max_solid 1 -max_shell 1 -max_face 64 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.01528794944 -avg 0.003242584981 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: NBSHAPES : Faulty"
-
set filename ie_soapbox-A.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 28 ( 20 ) Summary = 28 ( 20 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 2 ( 2 ) Shell = 2 ( 2 ) Face = 112 ( 112 ) Summary = 685 ( 687 )
-STATSHAPE : Solid = 2 ( 2 ) Shell = 2 ( 2 ) Face = 112 ( 112 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 286 ( 288 )
-TOLERANCE : MaxTol = 0.5386330267 ( 1.019942733 ) AvgTol = 0.009444234359 ( 0.01316262156 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 20 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 2 -shell 2 -face 112 -shape 687
+checkstatshape res_1 -solid 2 -shell 2 -face 112 -freewire 0 -freeedge 0 -sharededge 288
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.019942733 -avg 0.01316262156]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 20 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 2 -shell 2 -face 112 -shape 685 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 2 -shell 2 -face 112 -freewire 0 -freeedge 0 -sharededge 286 -max_solid 2 -max_shell 2 -max_face 112 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.5386330267 -avg 0.009444234359 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
puts "TODO CR23096 ALL: STATSHAPE : Faulty"
-
set filename ie_soapbox-C.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 28 ( 14 ) Summary = 28 ( 14 )
-CHECKSHAPE : Wires = 2 ( 2 ) Faces = 2 ( 2 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 2 ( 2 ) Shell = 2 ( 2 ) Face = 110 ( 108 ) Summary = 681 ( 677 )
-STATSHAPE : Solid = 2 ( 2 ) Shell = 2 ( 2 ) Face = 110 ( 108 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 286 ( 286 )
-TOLERANCE : MaxTol = 0.009966026823 ( 0.009966026821 ) AvgTol = 0.00112455379 ( 0.001105565209 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 14 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 2 -max_faces 2 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 2 -shell 2 -face 108 -shape 677
+checkstatshape res_1 -solid 2 -shell 2 -face 108 -freewire 0 -freeedge 0 -sharededge 286
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.009966026821 -avg 0.001105565209]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 14 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 28 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 2 -max_faces 2 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 2 -max_faces 2 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 2 -shell 2 -face 110 -shape 681 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 2 -shell 2 -face 110 -freewire 0 -freeedge 0 -sharededge 286 -max_solid 2 -max_shell 2 -max_face 108 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.009966026823 -avg 0.00112455379 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename ie_turbine-A.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 51 ( 51 ) Face = 51 ( 51 ) Summary = 592 ( 592 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 51 ( 51 ) Face = 51 ( 51 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 222 ( 222 )
-TOLERANCE : MaxTol = 0.003384329586 ( 0.003391112155 ) AvgTol = 0.0004816527254 ( 0.0005297071311 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 51 -face 51 -shape 592
+checkstatshape res_1 -solid 0 -shell 51 -face 51 -freewire 0 -freeedge 0 -sharededge 222
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.003391112155 -avg 0.0005297071311]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 51 -face 51 -shape 592 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 51 -face 51 -freewire 0 -freeedge 0 -sharededge 222 -max_solid 0 -max_shell 51 -max_face 51 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.003384329586 -avg 0.0004816527254 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename ie_turbine-C.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 51 ( 51 ) Face = 51 ( 51 ) Summary = 592 ( 592 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 51 ( 51 ) Face = 51 ( 51 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 222 ( 222 )
-TOLERANCE : MaxTol = 0.003384329586 ( 0.003391112155 ) AvgTol = 0.0004816519264 ( 0.0005303843445 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 51 -face 51 -shape 592
+checkstatshape res_1 -solid 0 -shell 51 -face 51 -freewire 0 -freeedge 0 -sharededge 222
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.003391112155 -avg 0.0005303843445]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 51 -face 51 -shape 592 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 51 -face 51 -freewire 0 -freeedge 0 -sharededge 222 -max_solid 0 -max_shell 51 -max_face 51 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.003384329586 -avg 0.0004816519264 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename pe_exhaust-A.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 1 ) Summary = 0 ( 1 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 114 ( 114 ) Summary = 632 ( 632 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 114 ( 114 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 252 ( 252 )
-TOLERANCE : MaxTol = 0.003361988918 ( 0.01686781346 ) AvgTol = 0.00128557755 ( 0.002583616342 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 114 -shape 632
+checkstatshape res_1 -solid 1 -shell 1 -face 114 -freewire 0 -freeedge 0 -sharededge 252
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.01686781346 -avg 0.002583616342]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 114 -shape 632 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 114 -freewire 0 -freeedge 0 -sharededge 252 -max_solid 1 -max_shell 1 -max_face 114 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.003361988918 -avg 0.00128557755 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
-
set filename pe_soapbox-A.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 5 ( 4 ) Summary = 5 ( 4 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 135 ( 135 ) Summary = 831 ( 830 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 135 ( 135 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 346 ( 345 )
-TOLERANCE : MaxTol = 0.008167967794 ( 0.0138846985 ) AvgTol = 0.0006876792327 ( 0.002088120462 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 6 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 135 -shape 830
+checkstatshape res_1 -solid 1 -shell 1 -face 135 -freewire 0 -freeedge 0 -sharededge 345
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.0138846985 -avg 0.002088120462]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 6 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 135 -shape 831 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 135 -freewire 0 -freeedge 0 -sharededge 346 -max_solid 1 -max_shell 1 -max_face 135 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.008167967794 -avg 0.0006876792327 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
-
set filename pe_soapbox-B.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 10 ( 2 ) Summary = 10 ( 2 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 135 ( 135 ) Summary = 834 ( 833 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 135 ( 135 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 348 ( 347 )
-TOLERANCE : MaxTol = 0.0154238459 ( 0.01542376989 ) AvgTol = 0.0007316545128 ( 0.001217807677 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 135 -shape 833
+checkstatshape res_1 -solid 1 -shell 1 -face 135 -freewire 0 -freeedge 0 -sharededge 347
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.01542376989 -avg 0.001217807677]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 7 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 135 -shape 834 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 135 -freewire 0 -freeedge 0 -sharededge 348 -max_solid 1 -max_shell 1 -max_face 135 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.0154238459 -avg 0.0007316545128 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
-
set filename r103ec.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 28 ( 0 ) Summary = 28 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 146 ( 146 ) Summary = 860 ( 860 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 146 ( 146 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 346 ( 346 )
-TOLERANCE : MaxTol = 5.024535408e-007 ( 5.024535217e-007 ) AvgTol = 1.930849396e-007 ( 1.400781778e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 146 -shape 860
+checkstatshape res_1 -solid 1 -shell 1 -face 146 -freewire 0 -freeedge 0 -sharededge 346
+set max_tol_res_1 [checkmaxtol res_1 -tol 5.024535217e-007 -avg 1.400781778e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 28 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 146 -shape 860 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 146 -freewire 0 -freeedge 0 -sharededge 346 -max_solid 1 -max_shell 1 -max_face 146 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 5.024535408e-007 -avg 1.930849396e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename r111al.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 6 ( 6 ) Summary = 50 ( 50 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 6 ( 6 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 21 ( 21 )
-TOLERANCE : MaxTol = 0.009857357586 ( 0.1493799144 ) AvgTol = 0.001724165017 ( 0.02015831163 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 1 -face 6 -shape 50
+checkstatshape res_1 -solid 0 -shell 1 -face 6 -freewire 0 -freeedge 0 -sharededge 21
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.1493799144 -avg 0.02015831163]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 1 -face 6 -shape 50 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 1 -face 6 -freewire 0 -freeedge 0 -sharededge 21 -max_solid 0 -max_shell 1 -max_face 6 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.009857357586 -avg 0.001724165017 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
-
set filename r31ct.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 14 ( 5 ) Summary = 14 ( 5 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 3 ( 3 ) Shell = 3 ( 3 ) Face = 127 ( 127 ) Summary = 694 ( 694 )
-STATSHAPE : Solid = 3 ( 3 ) Shell = 3 ( 3 ) Face = 127 ( 127 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 268 ( 268 )
-TOLERANCE : MaxTol = 0.0357587389 ( 0.04624185716 ) AvgTol = 0.0008007182634 ( 0.001664746615 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 5 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 3 -shell 3 -face 127 -shape 694
+checkstatshape res_1 -solid 3 -shell 3 -face 127 -freewire 0 -freeedge 0 -sharededge 268
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.04624185716 -avg 0.001664746615]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 5 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 13 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 3 -shell 3 -face 127 -shape 694 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 3 -shell 3 -face 127 -freewire 0 -freeedge 0 -sharededge 268 -max_solid 3 -max_shell 3 -max_face 127 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.0357587389 -avg 0.0008007182634 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
-
set filename r31db.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 94 ( 83 ) Summary = 94 ( 83 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 3 ( 3 ) Shell = 3 ( 3 ) Face = 127 ( 127 ) Summary = 695 ( 695 )
-STATSHAPE : Solid = 3 ( 3 ) Shell = 3 ( 3 ) Face = 127 ( 127 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 269 ( 269 )
-TOLERANCE : MaxTol = 0.03575654023 ( 0.03575654023 ) AvgTol = 0.0006545391586 ( 0.00160112027 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 3 ( 3 ) N2Labels = 0 ( 0 ) TotalLabels = 4 ( 4 ) NameLabels = 1 ( 1 ) ColorLabels = 3 ( 3 ) LayerLabels = 3 ( 3 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = WHITE YELLOW ( WHITE YELLOW )
-NLAYERS : NLayers = 2 ( 2 )
-LAYERS : Layers = 210 211 ( 210 211 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 83 -max_faults 0
+checkxstat D_First -n0 1 -n1 3 -n2 0 -total 4 -withname 1 -withcolor 3 -withlayer 3 -centroid 0 -volume 0 -area 0 -colors { WHITE YELLOW } -nbcolors 2 -layers { 210 211 } -nblayers 2
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 3 -shell 3 -face 127 -shape 695
+checkstatshape res_1 -solid 3 -shell 3 -face 127 -freewire 0 -freeedge 0 -sharededge 269
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.03575654023 -avg 0.00160112027]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 83 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 94 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 3 -n2 0 -total 4 -withname 1 -withcolor 3 -withlayer 3 -centroid 0 -volume 0 -area 0 -nbcolors 2 -nblayers 2
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 3 -n2 0 -total 4 -withname 1 -withcolor 3 -withlayer 3 -centroid 0 -volume 0 -area 0 -colors { WHITE YELLOW } -nbcolors 2 -layers { 210 211 } -nblayers 2
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 3 -shell 3 -face 127 -shape 695 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 3 -shell 3 -face 127 -freewire 0 -freeedge 0 -sharededge 269 -max_solid 3 -max_shell 3 -max_face 127 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.03575654023 -avg 0.0006545391586 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
-
set filename r56ie.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 20 ( 17 ) Summary = 20 ( 17 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 495 ( 495 ) Summary = 3087 ( 3087 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 495 ( 495 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 1285 ( 1285 )
-TOLERANCE : MaxTol = 0.007275739139 ( 0.009837971082 ) AvgTol = 0.0003747715952 ( 0.0006818197071 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 16 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 495 -shape 3087
+checkstatshape res_1 -solid 1 -shell 1 -face 495 -freewire 0 -freeedge 0 -sharededge 1285
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.009837971082 -avg 0.0006818197071]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 16 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 16 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 495 -shape 3087 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 495 -freewire 0 -freeedge 0 -sharededge 1285 -max_solid 1 -max_shell 1 -max_face 495 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.007275739139 -avg 0.0003747715952 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
-
set filename r61pe.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 64 ( 56 ) Summary = 64 ( 56 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 6 ( 6 ) Shell = 6 ( 6 ) Face = 461 ( 461 ) Summary = 2954 ( 2954 )
-STATSHAPE : Solid = 9 ( 9 ) Shell = 9 ( 9 ) Face = 593 ( 593 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 1214 ( 1214 )
-TOLERANCE : MaxTol = 0.003189265597 ( 0.01213102778 ) AvgTol = 8.562945145e-005 ( 0.0003980331971 )
-LABELS : N0Labels = 7 ( 7 ) N1Labels = 9 ( 9 ) N2Labels = 0 ( 0 ) TotalLabels = 16 ( 16 ) NameLabels = 16 ( 16 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 56 -max_faults 0
+checkxstat D_First -n0 7 -n1 9 -n2 0 -total 16 -withname 16 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 6 -shell 6 -face 461 -shape 2954
+checkstatshape res_1 -solid 9 -shell 9 -face 593 -freewire 0 -freeedge 0 -sharededge 1214
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.01213102778 -avg 0.0003980331971]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 56 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 64 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 7 -n1 9 -n2 0 -total 16 -withname 16 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 7 -n1 9 -n2 0 -total 16 -withname 16 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 6 -shell 6 -face 461 -shape 2954 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 9 -shell 9 -face 593 -freewire 0 -freeedge 0 -sharededge 1214 -max_solid 9 -max_shell 9 -max_face 593 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.003189265597 -avg 8.562945145e-005 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
-
set filename r65a-pe.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 10 ( 0 ) Summary = 10 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 4 ( 4 ) Shell = 4 ( 4 ) Face = 676 ( 676 ) Summary = 4405 ( 4405 )
-STATSHAPE : Solid = 4 ( 4 ) Shell = 4 ( 4 ) Face = 676 ( 676 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 1789 ( 1789 )
-TOLERANCE : MaxTol = 0.0006326851963 ( 0.01045225195 ) AvgTol = 9.75365417e-006 ( 0.0002435784351 )
-LABELS : N0Labels = 5 ( 5 ) N1Labels = 680 ( 680 ) N2Labels = 0 ( 0 ) TotalLabels = 685 ( 685 ) NameLabels = 9 ( 9 ) ColorLabels = 0 ( 0 ) LayerLabels = 676 ( 676 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 4 ( 4 )
-LAYERS : Layers = LAGERNIET LEITBLECH_OBEN SCHLAUCHFASSUNG_OBEN SEILROLLE_1 ( LAGERNIET LEITBLECH_OBEN SCHLAUCHFASSUNG_OBEN SEILROLLE_1 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 5 -n1 680 -n2 0 -total 685 -withname 9 -withcolor 0 -withlayer 676 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { "LAGERNIET" "LEITBLECH_OBEN" "SCHLAUCHFASSUNG_OBEN" "SEILROLLE_1" } -nblayers 4
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 4 -shell 4 -face 676 -shape 4405
+checkstatshape res_1 -solid 4 -shell 4 -face 676 -freewire 0 -freeedge 0 -sharededge 1789
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.01045225195 -avg 0.0002435784351]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 6 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 5 -n1 680 -n2 0 -total 685 -withname 9 -withcolor 0 -withlayer 676 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 4
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 5 -n1 680 -n2 0 -total 685 -withname 9 -withcolor 0 -withlayer 676 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { "LAGERNIET" "LEITBLECH_OBEN" "SCHLAUCHFASSUNG_OBEN" "SEILROLLE_1" } -nblayers 4
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 4 -shell 4 -face 676 -shape 4405 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 4 -shell 4 -face 676 -freewire 0 -freeedge 0 -sharededge 1789 -max_solid 4 -max_shell 4 -max_face 676 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.0006326851963 -avg 9.75365417e-006 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
-
set filename r93id.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 38 ( 22 ) Summary = 38 ( 22 )
-CHECKSHAPE : Wires = 1 ( 1 ) Faces = 1 ( 1 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 224 ( 224 ) Summary = 1320 ( 1320 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 224 ( 224 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 538 ( 538 )
-TOLERANCE : MaxTol = 0.006032975282 ( 0.006033035609 ) AvgTol = 0.0005119211885 ( 0.0005119217262 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 22 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 1 -max_faces 1 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 224 -shape 1320
+checkstatshape res_1 -solid 1 -shell 1 -face 224 -freewire 0 -freeedge 0 -sharededge 538
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.006033035609 -avg 0.0005119217262]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 22 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 38 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 1 -max_faces 1 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 1 -max_faces 1 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 224 -shape 1320 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 224 -freewire 0 -freeedge 0 -sharededge 538 -max_solid 1 -max_shell 1 -max_face 224 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.006032975282 -avg 0.0005119211885 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename r_47-sd.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 10 ( 10 ) Shell = 10 ( 10 ) Face = 696 ( 696 ) Summary = 4505 ( 4505 )
-STATSHAPE : Solid = 10 ( 10 ) Shell = 10 ( 10 ) Face = 696 ( 696 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 1819 ( 1819 )
-TOLERANCE : MaxTol = 3.748730253e-007 ( 3.749497799e-007 ) AvgTol = 1.004579305e-007 ( 1.004580612e-007 )
-LABELS : N0Labels = 13 ( 13 ) N1Labels = 14 ( 14 ) N2Labels = 0 ( 0 ) TotalLabels = 27 ( 27 ) NameLabels = 25 ( 25 ) ColorLabels = 12 ( 12 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 8 ( 8 )
-COLORS : Colors = BLUEVIOLET CHARTREUSE3 GOLD3 RED RED2 SEAGREEN1 WHITE YELLOW ( BLUEVIOLET CHARTREUSE3 GOLD3 RED RED2 SEAGREEN1 WHITE YELLOW )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 13 -n1 14 -n2 0 -total 27 -withname 25 -withcolor 12 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUEVIOLET CHARTREUSE3 GOLD3 RED RED2 SEAGREEN1 WHITE YELLOW } -nbcolors 8 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 10 -shell 10 -face 696 -shape 4505
+checkstatshape res_1 -solid 10 -shell 10 -face 696 -freewire 0 -freeedge 0 -sharededge 1819
+set max_tol_res_1 [checkmaxtol res_1 -tol 3.749497799e-007 -avg 1.004580612e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 13 -n1 14 -n2 0 -total 27 -withname 25 -withcolor 12 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 8 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 13 -n1 14 -n2 0 -total 27 -withname 25 -withcolor 12 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUEVIOLET CHARTREUSE3 GOLD3 RED RED2 SEAGREEN1 WHITE YELLOW } -nbcolors 8 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 10 -shell 10 -face 696 -shape 4505 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 10 -shell 10 -face 696 -freewire 0 -freeedge 0 -sharededge 1819 -max_solid 10 -max_shell 10 -max_face 696 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 3.748730253e-007 -avg 1.004579305e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename r_64-pe.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 4 ( 4 ) Summary = 4 ( 4 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 4 ( 4 ) Shell = 4 ( 4 ) Face = 303 ( 303 ) Summary = 1953 ( 1953 )
-STATSHAPE : Solid = 37 ( 37 ) Shell = 37 ( 37 ) Face = 743 ( 743 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 802 ( 802 )
-TOLERANCE : MaxTol = 0.07416169578 ( 0.08279381612 ) AvgTol = 0.003679745563 ( 0.008393331016 )
-LABELS : N0Labels = 6 ( 6 ) N1Labels = 16 ( 16 ) N2Labels = 0 ( 0 ) TotalLabels = 22 ( 22 ) NameLabels = 22 ( 22 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+checkxstat D_First -n0 6 -n1 16 -n2 0 -total 22 -withname 22 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 4 -shell 4 -face 303 -shape 1953
+checkstatshape res_1 -solid 37 -shell 37 -face 743 -freewire 0 -freeedge 0 -sharededge 802
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.08279381612 -avg 0.008393331016]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 6 -n1 16 -n2 0 -total 22 -withname 22 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 6 -n1 16 -n2 0 -total 22 -withname 22 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 4 -shell 4 -face 303 -shape 1953 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 37 -shell 37 -face 743 -freewire 0 -freeedge 0 -sharededge 802 -max_solid 37 -max_shell 37 -max_face 743 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.07416169578 -avg 0.003679745563 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj5_k1-al-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 23 ( 23 ) Summary = 23 ( 23 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 39 ( 39 ) Summary = 325 ( 325 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 39 ( 39 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 141 ( 141 )
-TOLERANCE : MaxTol = 0.001016447268 ( 0.00101644727 ) AvgTol = 0.0001468267462 ( 0.0001468264159 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = GRAY61 ( GRAY61 )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 23 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { GRAY61 } -nbcolors 1 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 39 -shape 325
+checkstatshape res_1 -solid 1 -shell 1 -face 39 -freewire 0 -freeedge 0 -sharededge 141
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.00101644727 -avg 0.0001468264159]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 23 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 23 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { GRAY61 } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 39 -shape 325 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 39 -freewire 0 -freeedge 0 -sharededge 141 -max_solid 1 -max_shell 1 -max_face 39 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.001016447268 -avg 0.0001468267462 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename rp1sd.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 5 ( 5 ) Shell = 5 ( 5 ) Face = 153 ( 153 ) Summary = 890 ( 890 )
-STATSHAPE : Solid = 9 ( 9 ) Shell = 9 ( 9 ) Face = 300 ( 300 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 353 ( 353 )
-TOLERANCE : MaxTol = 5.891184164e-007 ( 5.884665384e-007 ) AvgTol = 1.983626303e-007 ( 1.982839941e-007 )
-LABELS : N0Labels = 7 ( 7 ) N1Labels = 7 ( 7 ) N2Labels = 0 ( 0 ) TotalLabels = 14 ( 14 ) NameLabels = 14 ( 14 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 7 -n1 7 -n2 0 -total 14 -withname 14 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 5 -shell 5 -face 153 -shape 890
+checkstatshape res_1 -solid 9 -shell 9 -face 300 -freewire 0 -freeedge 0 -sharededge 353
+set max_tol_res_1 [checkmaxtol res_1 -tol 5.884665384e-007 -avg 1.982839941e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 7 -n1 7 -n2 0 -total 14 -withname 14 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 7 -n1 7 -n2 0 -total 14 -withname 14 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 5 -shell 5 -face 153 -shape 890 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 9 -shell 9 -face 300 -freewire 0 -freeedge 0 -sharededge 353 -max_solid 9 -max_shell 9 -max_face 300 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 5.891184164e-007 -avg 1.983626303e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
-
set filename sd_turbine-A.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 14 ( 3 ) Summary = 14 ( 3 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 69 ( 69 ) Summary = 413 ( 413 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 69 ( 69 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 172 ( 172 )
-TOLERANCE : MaxTol = 5.770870575e-007 ( 5.770924319e-007 ) AvgTol = 2.2913618e-007 ( 2.274444606e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 64 ( 64 ) N2Labels = 0 ( 0 ) TotalLabels = 65 ( 65 ) NameLabels = 1 ( 1 ) ColorLabels = 65 ( 65 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 5 ( 5 )
-COLORS : Colors = BLUE3 DARKORANGE1 GREEN MEDIUMTURQUOISE RED ( BLUE3 DARKORANGE1 GREEN MEDIUMTURQUOISE RED )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 3 -max_faults 0
+checkxstat D_First -n0 1 -n1 64 -n2 0 -total 65 -withname 1 -withcolor 65 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE3 DARKORANGE1 GREEN MEDIUMTURQUOISE RED } -nbcolors 5 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 1 -face 69 -shape 413
+checkstatshape res_1 -solid 0 -shell 1 -face 69 -freewire 0 -freeedge 0 -sharededge 172
+set max_tol_res_1 [checkmaxtol res_1 -tol 5.770924319e-007 -avg 2.274444606e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 3 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 14 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 64 -n2 0 -total 65 -withname 1 -withcolor 65 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 5 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 64 -n2 0 -total 65 -withname 1 -withcolor 65 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE3 DARKORANGE1 GREEN MEDIUMTURQUOISE RED } -nbcolors 5 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 1 -face 69 -shape 413 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 1 -face 69 -freewire 0 -freeedge 0 -sharededge 172 -max_solid 0 -max_shell 1 -max_face 69 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 5.770870575e-007 -avg 2.2913618e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename t1m.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 2 ( 2 ) Summary = 2 ( 2 )
-CHECKSHAPE : Wires = 2 ( 3 ) Faces = 2 ( 3 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 2 ( 2 ) Face = 63 ( 63 ) Summary = 406 ( 406 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 2 ( 2 ) Face = 63 ( 63 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 160 ( 160 )
-TOLERANCE : MaxTol = 0.05215797993 ( 0.05215797993 ) AvgTol = 0.001571061394 ( 0.001522362925 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 3 -max_faces 3 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 2 -face 63 -shape 406
+checkstatshape res_1 -solid 0 -shell 2 -face 63 -freewire 0 -freeedge 0 -sharededge 160
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.05215797993 -avg 0.001522362925]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 3 -max_faces 3 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 2 -max_faces 2 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 2 -face 63 -shape 406 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 2 -face 63 -freewire 0 -freeedge 0 -sharededge 160 -max_solid 0 -max_shell 2 -max_face 63 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.05215797993 -avg 0.001571061394 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename t1s.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 2 ( 2 ) Summary = 2 ( 2 )
-CHECKSHAPE : Wires = 2 ( 3 ) Faces = 2 ( 3 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 2 ( 2 ) Face = 63 ( 63 ) Summary = 406 ( 406 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 2 ( 2 ) Face = 63 ( 63 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 160 ( 160 )
-TOLERANCE : MaxTol = 0.05215797993 ( 0.05215797993 ) AvgTol = 0.001571061394 ( 0.001522362925 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 3 -max_faces 3 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 2 -face 63 -shape 406
+checkstatshape res_1 -solid 0 -shell 2 -face 63 -freewire 0 -freeedge 0 -sharededge 160
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.05215797993 -avg 0.001522362925]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 3 -max_faces 3 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 2 -max_faces 2 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 2 -face 63 -shape 406 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 2 -face 63 -freewire 0 -freeedge 0 -sharededge 160 -max_solid 0 -max_shell 2 -max_face 63 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.05215797993 -avg 0.001571061394 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename t3m.stp
-set ref_data {
-DATA : Faulties = 0 ( 10 ) Warnings = 0 ( 0 ) Summary = 0 ( 10 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 10 ( 10 ) Summary = 10 ( 10 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 71 ( 71 ) Summary = 449 ( 449 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 71 ( 71 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 179 ( 179 )
-TOLERANCE : MaxTol = 6.768863095e-06 ( 6.768863095e-06 ) AvgTol = 3.117603961e-07 ( 3.162986721e-07 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 10
+checkdoc "tpstat c" -max_warns 10 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 71 -shape 449
+checkstatshape res_1 -solid 1 -shell 1 -face 71 -freewire 0 -freeedge 0 -sharededge 179
+set max_tol_res_1 [checkmaxtol res_1 -tol 6.768863095e-06 -avg 3.162986721e-07]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 10
+checkdoc "tpstat c" -max_warns 10 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 10 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 71 -shape 449 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 71 -freewire 0 -freeedge 0 -sharededge 179 -max_solid 1 -max_shell 1 -max_face 71 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 6.768863095e-06 -avg 3.117603961e-07 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename t4mug.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 5 ( 5 ) Summary = 5 ( 5 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 2 ( 2 ) Face = 12 ( 12 ) Summary = 152 ( 144 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 2 ( 2 ) Face = 12 ( 12 ) FreeWire = 0 ( 0 ) FreeEdge = 7 ( 7 ) SharedEdge = 45 ( 45 )
-TOLERANCE : MaxTol = 0.008406290248 ( 0.008408732296 ) AvgTol = 0.001787192472 ( 0.001970108735 )
-LABELS : N0Labels = 3 ( 3 ) N1Labels = 2 ( 2 ) N2Labels = 0 ( 0 ) TotalLabels = 5 ( 5 ) NameLabels = 5 ( 5 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 5 -max_faults 0
+checkxstat D_First -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 2 -face 12 -shape 144
+checkstatshape res_1 -solid 0 -shell 2 -face 12 -freewire 0 -freeedge 7 -sharededge 45
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.008408732296 -avg 0.001970108735]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 5 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 5 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 2 -face 12 -shape 152 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 2 -face 12 -freewire 0 -freeedge 7 -sharededge 45 -max_solid 0 -max_shell 2 -max_face 12 -max_freewire 0 -max_freeedge 7
+checkmaxtol res_2 -tol 0.008406290248 -avg 0.001787192472 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj6_b1-tc-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 6 ) Summary = 0 ( 6 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 339 ( 339 ) Summary = 1940 ( 1939 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 339 ( 339 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 810 ( 809 )
-TOLERANCE : MaxTol = 0.03775850689 ( 0.07449683755 ) AvgTol = 0.009233317918 ( 0.01501864352 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 1 ( 1 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = WHITE ( WHITE )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 000 ( 000 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 6 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { 000 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 339 -shape 1939
+checkstatshape res_1 -solid 1 -shell 1 -face 339 -freewire 0 -freeedge 0 -sharededge 809
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.07449683755 -avg 0.01501864352]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 6 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { 000 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 339 -shape 1940 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 339 -freewire 0 -freeedge 0 -sharededge 810 -max_solid 1 -max_shell 1 -max_face 339 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.03775850689 -avg 0.009233317918 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename tr10_r0101_sd.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 5 ( 5 ) Shell = 5 ( 5 ) Face = 153 ( 153 ) Summary = 890 ( 890 )
-STATSHAPE : Solid = 9 ( 9 ) Shell = 9 ( 9 ) Face = 300 ( 300 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 353 ( 353 )
-TOLERANCE : MaxTol = 6.215531674e-007 ( 6.190520296e-007 ) AvgTol = 2.022786755e-007 ( 2.021534652e-007 )
-LABELS : N0Labels = 7 ( 7 ) N1Labels = 7 ( 7 ) N2Labels = 0 ( 0 ) TotalLabels = 14 ( 14 ) NameLabels = 14 ( 14 ) ColorLabels = 5 ( 5 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 5 ( 5 )
-COLORS : Colors = FORESTGREEN LIGHTSTEELBLUE3 MEDIUMPURPLE2 ROYALBLUE TAN2 ( FORESTGREEN LIGHTSTEELBLUE3 MEDIUMPURPLE2 ROYALBLUE TAN2 )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 7 -n1 7 -n2 0 -total 14 -withname 14 -withcolor 5 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { FORESTGREEN LIGHTSTEELBLUE3 MEDIUMPURPLE2 ROYALBLUE TAN2 } -nbcolors 5 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 5 -shell 5 -face 153 -shape 890
+checkstatshape res_1 -solid 9 -shell 9 -face 300 -freewire 0 -freeedge 0 -sharededge 353
+set max_tol_res_1 [checkmaxtol res_1 -tol 6.190520296e-007 -avg 2.021534652e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 7 -n1 7 -n2 0 -total 14 -withname 14 -withcolor 5 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 5 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 7 -n1 7 -n2 0 -total 14 -withname 14 -withcolor 5 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { FORESTGREEN LIGHTSTEELBLUE3 MEDIUMPURPLE2 ROYALBLUE TAN2 } -nbcolors 5 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 5 -shell 5 -face 153 -shape 890 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 9 -shell 9 -face 300 -freewire 0 -freeedge 0 -sharededge 353 -max_solid 9 -max_shell 9 -max_face 300 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 6.215531674e-007 -avg 2.022786755e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
-
set filename trj7_b1-id-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 31 ( 28 ) Summary = 31 ( 28 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 357 ( 357 ) Summary = 2004 ( 2003 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 357 ( 357 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 840 ( 839 )
-TOLERANCE : MaxTol = 0.007356791914 ( 0.009485808595 ) AvgTol = 0.0003528568313 ( 0.001207996284 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = DARKSLATEGRAY ( DARKSLATEGRAY )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 29 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { DARKSLATEGRAY } -nbcolors 1 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 1 -face 357 -shape 2003
+checkstatshape res_1 -solid 0 -shell 1 -face 357 -freewire 0 -freeedge 0 -sharededge 839
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.009485808595 -avg 0.001207996284]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 29 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 21 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { DARKSLATEGRAY } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 1 -face 357 -shape 2004 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 1 -face 357 -freewire 0 -freeedge 0 -sharededge 840 -max_solid 0 -max_shell 1 -max_face 357 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.007356791914 -avg 0.0003528568313 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj7_b1-ug-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 1 ( 14 ) Summary = 1 ( 14 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 327 ( 327 ) Summary = 1895 ( 1895 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 327 ( 327 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 787 ( 787 )
-TOLERANCE : MaxTol = 0.009955368478 ( 0.01960514969 ) AvgTol = 0.002055715355 ( 0.003376235267 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 1 ( 1 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = INDIANRED1 ( INDIANRED1 )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 1 ( 1 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 15 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { INDIANRED1 } -nbcolors 1 -layers { 1 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 327 -shape 1895
+checkstatshape res_1 -solid 1 -shell 1 -face 327 -freewire 0 -freeedge 0 -sharededge 787
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.01960514969 -avg 0.003376235267]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 15 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { INDIANRED1 } -nbcolors 1 -layers { 1 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 327 -shape 1895 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 327 -freewire 0 -freeedge 0 -sharededge 787 -max_solid 1 -max_shell 1 -max_face 327 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.009955368478 -avg 0.002055715355 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
-
set filename tr9_r0801-sd.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 7 ( 0 ) Summary = 7 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 3 ( 3 ) Shell = 3 ( 3 ) Face = 165 ( 165 ) Summary = 1320 ( 1320 )
-STATSHAPE : Solid = 3 ( 3 ) Shell = 3 ( 3 ) Face = 165 ( 165 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 528 ( 528 )
-TOLERANCE : MaxTol = 6.887498394e-007 ( 6.887503258e-007 ) AvgTol = 1.348970841e-007 ( 1.348970739e-007 )
-LABELS : N0Labels = 4 ( 4 ) N1Labels = 28 ( 28 ) N2Labels = 0 ( 0 ) TotalLabels = 32 ( 32 ) NameLabels = 7 ( 7 ) ColorLabels = 28 ( 28 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 4 ( 4 )
-COLORS : Colors = BLACK RED3 ROYALBLUE2 STEELBLUE1 ( BLACK RED3 ROYALBLUE2 STEELBLUE1 )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 4 -n1 28 -n2 0 -total 32 -withname 7 -withcolor 28 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLACK RED3 ROYALBLUE2 STEELBLUE1 } -nbcolors 4 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 3 -shell 3 -face 165 -shape 1320
+checkstatshape res_1 -solid 3 -shell 3 -face 165 -freewire 0 -freeedge 0 -sharededge 528
+set max_tol_res_1 [checkmaxtol res_1 -tol 6.887503258e-007 -avg 1.348970739e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 7 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 4 -n1 28 -n2 0 -total 32 -withname 7 -withcolor 28 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 4 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 4 -n1 28 -n2 0 -total 32 -withname 7 -withcolor 28 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLACK RED3 ROYALBLUE2 STEELBLUE1 } -nbcolors 4 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 3 -shell 3 -face 165 -shape 1320 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 3 -shell 3 -face 165 -freewire 0 -freeedge 0 -sharededge 528 -max_solid 3 -max_shell 3 -max_face 165 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 6.887498394e-007 -avg 1.348970841e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
-
set filename trcol1.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 5 ( 2 ) Summary = 5 ( 2 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 138 ( 138 ) Summary = 842 ( 842 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 138 ( 138 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 351 ( 351 )
-TOLERANCE : MaxTol = 0.1179467933 ( 0.1462670652 ) AvgTol = 0.02636175802 ( 0.03478480279 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 1 -face 138 -shape 842
+checkstatshape res_1 -solid 0 -shell 1 -face 138 -freewire 0 -freeedge 0 -sharededge 351
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.1462670652 -avg 0.03478480279]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 5 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 1 -face 138 -shape 842 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 1 -face 138 -freewire 0 -freeedge 0 -sharededge 351 -max_solid 0 -max_shell 1 -max_face 138 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.1179467933 -avg 0.02636175802 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj10_b2-ac-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 12 ( 17 ) Summary = 12 ( 17 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 2 ( 2 ) Face = 317 ( 317 ) Summary = 2047 ( 2047 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 2 ( 2 ) Face = 317 ( 317 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 857 ( 857 )
-TOLERANCE : MaxTol = 0.1005256507 ( 0.1005256507 ) AvgTol = 0.0006882150087 ( 0.000688621996 )
-LABELS : N0Labels = 2 ( 2 ) N1Labels = 1 ( 1 ) N2Labels = 0 ( 0 ) TotalLabels = 3 ( 3 ) NameLabels = 3 ( 3 ) ColorLabels = 1 ( 1 ) LayerLabels = 1 ( 1 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = GRAY73 ( GRAY73 )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 0 ( 0 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 17 -max_faults 0
+checkxstat D_First -n0 2 -n1 1 -n2 0 -total 3 -withname 3 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { GRAY73 } -nbcolors 1 -layers { 0 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 2 -face 317 -shape 2047
+checkstatshape res_1 -solid 1 -shell 2 -face 317 -freewire 0 -freeedge 0 -sharededge 857
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.1005256507 -avg 0.000688621996]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 17 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 12 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 2 -n1 1 -n2 0 -total 3 -withname 3 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 2 -n1 1 -n2 0 -total 3 -withname 3 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { GRAY73 } -nbcolors 1 -layers { 0 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 2 -face 317 -shape 2047 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 2 -face 317 -freewire 0 -freeedge 0 -sharededge 857 -max_solid 1 -max_shell 2 -max_face 317 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.1005256507 -avg 0.0006882150087 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
-
set filename trj10_b2-oc-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 15 ( 5 ) Summary = 15 ( 5 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 251 ( 251 ) Summary = 1623 ( 1623 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 251 ( 251 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 674 ( 674 )
-TOLERANCE : MaxTol = 0.002562040373 ( 0.005004494964 ) AvgTol = 2.347361582e-005 ( 7.134464059e-005 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 1 ( 1 ) Volume = 1 ( 1 ) Area = 1 ( 1 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 3 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 1 -volume 1 -area 1 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 251 -shape 1623
+checkstatshape res_1 -solid 1 -shell 1 -face 251 -freewire 0 -freeedge 0 -sharededge 674
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.005004494964 -avg 7.134464059e-005]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 3 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 5 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 1 -volume 1 -area 1 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 1 -volume 1 -area 1 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 251 -shape 1623 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 251 -freewire 0 -freeedge 0 -sharededge 674 -max_solid 1 -max_shell 1 -max_face 251 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.002562040373 -avg 2.347361582e-005 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj7_pm5-in-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 51 ( 65 ) Summary = 51 ( 65 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 474 ( 474 ) Summary = 2872 ( 2872 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 474 ( 474 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 1180 ( 1180 )
-TOLERANCE : MaxTol = 0.0607818994 ( 0.06078250721 ) AvgTol = 0.00290702214 ( 0.002948262692 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = GRAY66 ( GRAY66 )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 65 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { GRAY66 } -nbcolors 1 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 474 -shape 2872
+checkstatshape res_1 -solid 1 -shell 1 -face 474 -freewire 0 -freeedge 0 -sharededge 1180
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.06078250721 -avg 0.002948262692]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 65 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 51 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { GRAY66 } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 474 -shape 2872 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 474 -freewire 0 -freeedge 0 -sharededge 1180 -max_solid 1 -max_shell 1 -max_face 474 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.0607818994 -avg 0.00290702214 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj10_pm8-in-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 202 ( 209 ) Summary = 202 ( 209 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 13 ( 13 ) Shell = 13 ( 13 ) Face = 627 ( 627 ) Summary = 4255 ( 4255 )
-STATSHAPE : Solid = 14 ( 14 ) Shell = 14 ( 14 ) Face = 634 ( 634 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 1716 ( 1716 )
-TOLERANCE : MaxTol = 0.004860951184 ( 0.004860999793 ) AvgTol = 0.0002373535886 ( 0.0002374673823 )
-LABELS : N0Labels = 16 ( 16 ) N1Labels = 16 ( 16 ) N2Labels = 0 ( 0 ) TotalLabels = 32 ( 32 ) NameLabels = 32 ( 32 ) ColorLabels = 13 ( 13 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 8 ( 8 )
-COLORS : Colors = DARKSEAGREEN4 GOLDENROD3 GRAY66 LIGHTGOLDENROD4 LIGHTSLATEGRAY LIGHTSTEELBLUE4 SIENNA3 YELLOW3 ( DARKSEAGREEN4 GOLDENROD3 GRAY66 LIGHTGOLDENROD4 LIGHTSLATEGRAY LIGHTSTEELBLUE4 SIENNA3 YELLOW3 )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 209 -max_faults 0
+checkxstat D_First -n0 16 -n1 16 -n2 0 -total 32 -withname 32 -withcolor 13 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { DARKSEAGREEN4 GOLDENROD3 GRAY66 LIGHTGOLDENROD4 LIGHTSLATEGRAY LIGHTSTEELBLUE4 SIENNA3 YELLOW3 } -nbcolors 8 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 13 -shell 13 -face 627 -shape 4255
+checkstatshape res_1 -solid 14 -shell 14 -face 634 -freewire 0 -freeedge 0 -sharededge 1716
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.004860999793 -avg 0.0002374673823]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 209 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 202 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 16 -n1 16 -n2 0 -total 32 -withname 32 -withcolor 13 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 8 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 16 -n1 16 -n2 0 -total 32 -withname 32 -withcolor 13 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { DARKSEAGREEN4 GOLDENROD3 GRAY66 LIGHTGOLDENROD4 LIGHTSLATEGRAY LIGHTSTEELBLUE4 SIENNA3 YELLOW3 } -nbcolors 8 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 13 -shell 13 -face 627 -shape 4255 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 14 -shell 14 -face 634 -freewire 0 -freeedge 0 -sharededge 1716 -max_solid 14 -max_shell 14 -max_face 634 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.004860951184 -avg 0.0002373535886 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
puts "TODO CR23096 ALL: CHECKSHAPE : Faulty"
puts "TODO CR23096 ALL: STATSHAPE : Faulty"
-
set filename trj12_ttmouse-pe-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 40 ( 18 ) Summary = 40 ( 18 )
-CHECKSHAPE : Wires = 64 ( 48 ) Faces = 64 ( 48 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 15 ( 16 ) Shell = 17 ( 17 ) Face = 367 ( 366 ) Summary = 2506 ( 2495 )
-STATSHAPE : Solid = 71 ( 79 ) Shell = 87 ( 87 ) Face = 2740 ( 2732 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 1064 ( 1057 )
-TOLERANCE : MaxTol = 4.483126782 ( 5.153790881 ) AvgTol = 0.05936982281 ( 0.06645133562 )
-LABELS : N0Labels = 10 ( 10 ) N1Labels = 32 ( 32 ) N2Labels = 0 ( 0 ) TotalLabels = 42 ( 42 ) NameLabels = 22 ( 22 ) ColorLabels = 22 ( 22 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 6 ( 6 )
-COLORS : Colors = DEEPSKYBLUE1 GREEN MAGENTA1 RED SIENNA YELLOW2 ( DEEPSKYBLUE1 GREEN MAGENTA1 RED SIENNA YELLOW2 )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 18 -max_faults 0
+checkxstat D_First -n0 10 -n1 32 -n2 0 -total 42 -withname 22 -withcolor 22 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { DEEPSKYBLUE1 GREEN MAGENTA1 RED SIENNA YELLOW2 } -nbcolors 6 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 48 -max_faces 48 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 16 -shell 17 -face 366 -shape 2495
+checkstatshape res_1 -solid 79 -shell 87 -face 2732 -freewire 0 -freeedge 0 -sharededge 1057
+set max_tol_res_1 [checkmaxtol res_1 -tol 5.153790881 -avg 0.06645133562]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 18 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 40 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 10 -n1 32 -n2 0 -total 42 -withname 22 -withcolor 22 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 6 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 10 -n1 32 -n2 0 -total 42 -withname 22 -withcolor 22 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { DEEPSKYBLUE1 GREEN MAGENTA1 RED SIENNA YELLOW2 } -nbcolors 6 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 48 -max_faces 48 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 64 -max_faces 64 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 15 -shell 17 -face 367 -shape 2506 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 71 -shell 87 -face 2740 -freewire 0 -freeedge 0 -sharededge 1064 -max_solid 79 -max_shell 87 -max_face 2732 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 4.483126782 -avg 0.05936982281 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj9_b2-pe-203.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 3 ( 9 ) Summary = 3 ( 9 )
-CHECKSHAPE : Wires = 1 ( 1 ) Faces = 1 ( 1 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 252 ( 252 ) Summary = 1622 ( 1622 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 252 ( 252 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 673 ( 673 )
-TOLERANCE : MaxTol = 0.005365460363 ( 0.007833404346 ) AvgTol = 9.982982836e-005 ( 0.0001410844712 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 1 ( 1 ) Volume = 1 ( 1 ) Area = 1 ( 1 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = WHITE ( WHITE )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 9 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 1 -volume 1 -area 1 -colors { WHITE } -nbcolors 1 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 1 -max_faces 1 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 252 -shape 1622
+checkstatshape res_1 -solid 1 -shell 1 -face 252 -freewire 0 -freeedge 0 -sharededge 673
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.007833404346 -avg 0.0001410844712]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 9 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 1 -volume 1 -area 1 -nbcolors 1 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 1 -volume 1 -area 1 -colors { WHITE } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 1 -max_faces 1 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 1 -max_faces 1 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 252 -shape 1622 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 252 -freewire 0 -freeedge 0 -sharededge 673 -max_solid 1 -max_shell 1 -max_face 252 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.005365460363 -avg 9.982982836e-005 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj3_pm1-al-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 1 ) Summary = 0 ( 1 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 61 ( 61 ) Summary = 830 ( 830 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 61 ( 61 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 384 ( 384 )
-TOLERANCE : MaxTol = 0.05329654166 ( 0.05427178221 ) AvgTol = 0.005154426307 ( 0.005256226004 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 1 ( 1 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = GRAY61 ( GRAY61 )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = L ( L )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { GRAY61 } -nbcolors 1 -layers { L } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 1 -face 61 -shape 830
+checkstatshape res_1 -solid 0 -shell 1 -face 61 -freewire 0 -freeedge 0 -sharededge 384
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.05427178221 -avg 0.005256226004]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { GRAY61 } -nbcolors 1 -layers { L } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 1 -face 61 -shape 830 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 1 -face 61 -freewire 0 -freeedge 0 -sharededge 384 -max_solid 0 -max_shell 1 -max_face 61 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.05329654166 -avg 0.005154426307 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
-
set filename ug_soapbox-B.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 25 ( 5 ) Summary = 25 ( 5 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 94 ( 94 ) Summary = 570 ( 570 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 94 ( 94 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 232 ( 232 )
-TOLERANCE : MaxTol = 0.00325269835 ( 0.03359335896 ) AvgTol = 0.0004152472389 ( 0.00304307701 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = MAGENTA1 ( MAGENTA1 )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { MAGENTA1 } -nbcolors 1 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 94 -shape 570
+checkstatshape res_1 -solid 1 -shell 1 -face 94 -freewire 0 -freeedge 0 -sharededge 232
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.03359335896 -avg 0.00304307701]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 11 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { MAGENTA1 } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 94 -shape 570 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 94 -freewire 0 -freeedge 0 -sharededge 232 -max_solid 1 -max_shell 1 -max_face 94 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.00325269835 -avg 0.0004152472389 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
-
set filename trj4_k1_top-ec-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 12 ( 0 ) Summary = 12 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 47 ( 47 ) Face = 47 ( 47 ) Summary = 614 ( 614 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 47 ( 47 ) Face = 47 ( 47 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 240 ( 240 )
-TOLERANCE : MaxTol = 8.726098798e-006 ( 0.0001275978398 ) AvgTol = 6.028713181e-007 ( 4.763195785e-006 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 47 -face 47 -shape 614
+checkstatshape res_1 -solid 0 -shell 47 -face 47 -freewire 0 -freeedge 0 -sharededge 240
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.0001275978398 -avg 4.763195785e-006]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 12 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 47 -face 47 -shape 614 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 47 -face 47 -freewire 0 -freeedge 0 -sharededge 240 -max_solid 0 -max_shell 47 -max_face 47 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 8.726098798e-006 -avg 6.028713181e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
-
set filename trj4_pm2-ct-203.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 139 ( 48 ) Summary = 139 ( 48 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 762 ( 762 ) Summary = 5219 ( 5151 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 762 ( 762 ) FreeWire = 0 ( 0 ) FreeEdge = 68 ( 68 ) SharedEdge = 2111 ( 2111 )
-TOLERANCE : MaxTol = 0.06547014744 ( 0.09657601968 ) AvgTol = 0.001090769259 ( 0.006430218535 )
-LABELS : N0Labels = 3 ( 3 ) N1Labels = 2 ( 2 ) N2Labels = 0 ( 0 ) TotalLabels = 5 ( 5 ) NameLabels = 5 ( 5 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 48 -max_faults 0
+checkxstat D_First -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 762 -shape 5151
+checkstatshape res_1 -solid 1 -shell 1 -face 762 -freewire 0 -freeedge 68 -sharededge 2111
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.09657601968 -avg 0.006430218535]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 48 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 96 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 762 -shape 5219 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 762 -freewire 0 -freeedge 68 -sharededge 2111 -max_solid 1 -max_shell 1 -max_face 762 -max_freewire 0 -max_freeedge 68
+checkmaxtol res_2 -tol 0.06547014744 -avg 0.001090769259 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
-
set filename trj4_pm2-ct2-203.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 76 ( 58 ) Summary = 76 ( 58 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 572 ( 572 ) Summary = 3459 ( 3435 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 572 ( 572 ) FreeWire = 0 ( 0 ) FreeEdge = 24 ( 24 ) SharedEdge = 1412 ( 1412 )
-TOLERANCE : MaxTol = 0.07987447694 ( 0.09279010735 ) AvgTol = 0.001529989628 ( 0.002688497303 )
-LABELS : N0Labels = 3 ( 3 ) N1Labels = 2 ( 2 ) N2Labels = 0 ( 0 ) TotalLabels = 5 ( 5 ) NameLabels = 5 ( 5 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 58 -max_faults 0
+checkxstat D_First -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 572 -shape 3435
+checkstatshape res_1 -solid 1 -shell 1 -face 572 -freewire 0 -freeedge 24 -sharededge 1412
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.09279010735 -avg 0.002688497303]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 58 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 47 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 572 -shape 3459 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 572 -freewire 0 -freeedge 24 -sharededge 1412 -max_solid 1 -max_shell 1 -max_face 572 -max_freewire 0 -max_freeedge 24
+checkmaxtol res_2 -tol 0.07987447694 -avg 0.001529989628 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj6_b1-ct-203.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 2 ( 12 ) Summary = 2 ( 12 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 403 ( 403 ) Summary = 2339 ( 2339 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 403 ( 403 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 985 ( 985 )
-TOLERANCE : MaxTol = 0.006948456659 ( 0.006948526143 ) AvgTol = 0.001375104635 ( 0.001375103635 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 12 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 403 -shape 2339
+checkstatshape res_1 -solid 1 -shell 1 -face 403 -freewire 0 -freeedge 0 -sharededge 985
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.006948526143 -avg 0.001375103635]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 12 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 403 -shape 2339 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 403 -freewire 0 -freeedge 0 -sharededge 985 -max_solid 1 -max_shell 1 -max_face 403 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.006948456659 -avg 0.001375104635 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
-set LinuxFaulties {TOLERANCE}
set filename trj6_b1-ec-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 5 ( 11 ) Summary = 5 ( 11 )
-CHECKSHAPE : Wires = 4 ( 4 ) Faces = 4 ( 4 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 292 ( 292 ) Summary = 1707 ( 1707 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 292 ( 292 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 718 ( 718 )
-TOLERANCE : MaxTol = 0.1252883206 ( 0.1252874378 ) AvgTol = 0.003079961606 ( 0.01117254297 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 19 ( 19 ) N2Labels = 0 ( 0 ) TotalLabels = 20 ( 20 ) NameLabels = 1 ( 1 ) ColorLabels = 20 ( 20 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 1 ( 1 ) Volume = 1 ( 1 ) Area = 1 ( 1 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = BLUE4 MATRAGRAY ( BLUE4 MATRAGRAY )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 13 -max_faults 0
+checkxstat D_First -n0 1 -n1 19 -n2 0 -total 20 -withname 1 -withcolor 20 -withlayer 0 -centroid 1 -volume 1 -area 1 -colors { BLUE4 MATRAGRAY } -nbcolors 2 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 4 -max_faces 4 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 292 -shape 1707
+checkstatshape res_1 -solid 1 -shell 1 -face 292 -freewire 0 -freeedge 0 -sharededge 718
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.1252874378 -avg 0.01117254297]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 13 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 7 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 19 -n2 0 -total 20 -withname 1 -withcolor 20 -withlayer 0 -centroid 1 -volume 1 -area 1 -nbcolors 2 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 19 -n2 0 -total 20 -withname 1 -withcolor 20 -withlayer 0 -centroid 1 -volume 1 -area 1 -colors { BLUE4 MATRAGRAY } -nbcolors 2 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 4 -max_faces 4 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 4 -max_faces 4 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 292 -shape 1707 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 292 -freewire 0 -freeedge 0 -sharededge 718 -max_solid 1 -max_shell 1 -max_face 292 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.1252883206 -avg 0.003079961606 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
-set LinuxDiff 2
set filename trj6_b1-id-203.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 31 ( 28 ) Summary = 31 ( 28 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 357 ( 357 ) Summary = 2005 ( 2004 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 357 ( 357 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 840 ( 839 )
-TOLERANCE : MaxTol = 0.007356791914 ( 0.009485808595 ) AvgTol = 0.0003528126958 ( 0.001207999522 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 29 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 357 -shape 2004
+checkstatshape res_1 -solid 1 -shell 1 -face 357 -freewire 0 -freeedge 0 -sharededge 839
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.009485808595 -avg 0.001207999522]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 29 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 21 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 357 -shape 2005 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 357 -freewire 0 -freeedge 0 -sharededge 840 -max_solid 1 -max_shell 1 -max_face 357 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.007356791914 -avg 0.0003528126958 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj6_b1-pe-203.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 2 ( 12 ) Summary = 2 ( 12 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 371 ( 371 ) Summary = 2101 ( 2101 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 371 ( 371 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 865 ( 865 )
-TOLERANCE : MaxTol = 0.003827431453 ( 0.009890984488 ) AvgTol = 0.0005233077558 ( 0.001598027633 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 28 ( 28 ) N2Labels = 0 ( 0 ) TotalLabels = 29 ( 29 ) NameLabels = 1 ( 1 ) ColorLabels = 28 ( 28 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 1 ( 1 ) Volume = 1 ( 1 ) Area = 1 ( 1 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = LIGHTSLATEGRAY ( LIGHTSLATEGRAY )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 12 -max_faults 0
+checkxstat D_First -n0 1 -n1 28 -n2 0 -total 29 -withname 1 -withcolor 28 -withlayer 0 -centroid 1 -volume 1 -area 1 -colors { LIGHTSLATEGRAY } -nbcolors 1 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 371 -shape 2101
+checkstatshape res_1 -solid 1 -shell 1 -face 371 -freewire 0 -freeedge 0 -sharededge 865
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.009890984488 -avg 0.001598027633]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 12 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 28 -n2 0 -total 29 -withname 1 -withcolor 28 -withlayer 0 -centroid 1 -volume 1 -area 1 -nbcolors 1 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 28 -n2 0 -total 29 -withname 1 -withcolor 28 -withlayer 0 -centroid 1 -volume 1 -area 1 -colors { LIGHTSLATEGRAY } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 371 -shape 2101 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 371 -freewire 0 -freeedge 0 -sharededge 865 -max_solid 1 -max_shell 1 -max_face 371 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.003827431453 -avg 0.0005233077558 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj6_b1-pe-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 2 ( 12 ) Summary = 2 ( 12 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 371 ( 371 ) Summary = 2101 ( 2101 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 371 ( 371 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 865 ( 865 )
-TOLERANCE : MaxTol = 0.003827431453 ( 0.009890984488 ) AvgTol = 0.0005233077558 ( 0.001598027633 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 28 ( 28 ) N2Labels = 0 ( 0 ) TotalLabels = 29 ( 29 ) NameLabels = 1 ( 1 ) ColorLabels = 28 ( 28 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 1 ( 1 ) Volume = 1 ( 1 ) Area = 1 ( 1 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = LIGHTSLATEGRAY ( LIGHTSLATEGRAY )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 12 -max_faults 0
+checkxstat D_First -n0 1 -n1 28 -n2 0 -total 29 -withname 1 -withcolor 28 -withlayer 0 -centroid 1 -volume 1 -area 1 -colors { LIGHTSLATEGRAY } -nbcolors 1 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 371 -shape 2101
+checkstatshape res_1 -solid 1 -shell 1 -face 371 -freewire 0 -freeedge 0 -sharededge 865
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.009890984488 -avg 0.001598027633]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 12 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 28 -n2 0 -total 29 -withname 1 -withcolor 28 -withlayer 0 -centroid 1 -volume 1 -area 1 -nbcolors 1 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 28 -n2 0 -total 29 -withname 1 -withcolor 28 -withlayer 0 -centroid 1 -volume 1 -area 1 -colors { LIGHTSLATEGRAY } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 371 -shape 2101 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 371 -freewire 0 -freeedge 0 -sharededge 865 -max_solid 1 -max_shell 1 -max_face 371 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.003827431453 -avg 0.0005233077558 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj6_k1-al-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 23 ( 23 ) Summary = 23 ( 23 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 39 ( 39 ) Summary = 325 ( 325 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 39 ( 39 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 141 ( 141 )
-TOLERANCE : MaxTol = 0.000908804869 ( 0.0009088048691 ) AvgTol = 0.00015383891 ( 0.0001538386704 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = GRAY61 ( GRAY61 )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 23 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { GRAY61 } -nbcolors 1 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 39 -shape 325
+checkstatshape res_1 -solid 1 -shell 1 -face 39 -freewire 0 -freeedge 0 -sharededge 141
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.0009088048691 -avg 0.0001538386704]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 23 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 23 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { GRAY61 } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 39 -shape 325 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 39 -freewire 0 -freeedge 0 -sharededge 141 -max_solid 1 -max_shell 1 -max_face 39 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.000908804869 -avg 0.00015383891 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj6_k1-ec-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 45 ( 45 ) Summary = 291 ( 291 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 45 ( 45 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 117 ( 117 )
-TOLERANCE : MaxTol = 1.140748349e-007 ( 1.14074835e-007 ) AvgTol = 1.003433159e-007 ( 1.003433159e-007 )
-LABELS : N0Labels = 2 ( 2 ) N1Labels = 1 ( 1 ) N2Labels = 0 ( 0 ) TotalLabels = 3 ( 3 ) NameLabels = 3 ( 3 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 2 -n1 1 -n2 0 -total 3 -withname 3 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 45 -shape 291
+checkstatshape res_1 -solid 1 -shell 1 -face 45 -freewire 0 -freeedge 0 -sharededge 117
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.14074835e-007 -avg 1.003433159e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 2 -n1 1 -n2 0 -total 3 -withname 3 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 2 -n1 1 -n2 0 -total 3 -withname 3 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 45 -shape 291 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 45 -freewire 0 -freeedge 0 -sharededge 117 -max_solid 1 -max_shell 1 -max_face 45 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.140748349e-007 -avg 1.003433159e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
-
set filename trj6_k1-td-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 2 ( 1 ) Summary = 2 ( 1 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 59 ( 59 ) Face = 59 ( 59 ) Summary = 787 ( 787 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 59 ( 59 ) Face = 59 ( 59 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 304 ( 304 )
-TOLERANCE : MaxTol = 3.463377008e-005 ( 3.463377008e-005 ) AvgTol = 7.683204691e-007 ( 7.683204703e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 59 ( 59 ) N2Labels = 0 ( 0 ) TotalLabels = 60 ( 60 ) NameLabels = 1 ( 1 ) ColorLabels = 59 ( 59 ) LayerLabels = 59 ( 59 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 3 ( 3 )
-COLORS : Colors = YELLOW3 YELLOW3 YELLOW4 ( YELLOW3 YELLOW3 YELLOW4 )
-NLAYERS : NLayers = 3 ( 3 )
-LAYERS : Layers = 001 002 003 ( 001 002 003 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+checkxstat D_First -n0 1 -n1 59 -n2 0 -total 60 -withname 1 -withcolor 59 -withlayer 59 -centroid 0 -volume 0 -area 0 -colors { YELLOW3 YELLOW3 YELLOW4 } -nbcolors 3 -layers { 001 002 003 } -nblayers 3
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 59 -face 59 -shape 787
+checkstatshape res_1 -solid 0 -shell 59 -face 59 -freewire 0 -freeedge 0 -sharededge 304
+set max_tol_res_1 [checkmaxtol res_1 -tol 3.463377008e-005 -avg 7.683204703e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 59 -n2 0 -total 60 -withname 1 -withcolor 59 -withlayer 59 -centroid 0 -volume 0 -area 0 -nbcolors 3 -nblayers 3
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 59 -n2 0 -total 60 -withname 1 -withcolor 59 -withlayer 59 -centroid 0 -volume 0 -area 0 -colors { YELLOW3 YELLOW3 YELLOW4 } -nbcolors 3 -layers { 001 002 003 } -nblayers 3
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 59 -face 59 -shape 787 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 59 -face 59 -freewire 0 -freeedge 0 -sharededge 304 -max_solid 0 -max_shell 59 -max_face 59 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 3.463377008e-005 -avg 7.683204691e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj6_pm4-in-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 135 ( 135 ) Summary = 135 ( 135 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 17 ( 17 ) Shell = 17 ( 17 ) Face = 609 ( 609 ) Summary = 3807 ( 3807 )
-STATSHAPE : Solid = 27 ( 27 ) Shell = 27 ( 27 ) Face = 738 ( 738 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 1527 ( 1527 )
-TOLERANCE : MaxTol = 0.003481079391 ( 0.003481079389 ) AvgTol = 0.0001334080552 ( 0.0001334936167 )
-LABELS : N0Labels = 19 ( 19 ) N1Labels = 28 ( 28 ) N2Labels = 0 ( 0 ) TotalLabels = 47 ( 47 ) NameLabels = 47 ( 47 ) ColorLabels = 17 ( 17 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 12 ( 12 )
-COLORS : Colors = BLACK BLUE3 GRAY51 GRAY66 LIGHTGOLDENROD4 LIGHTSLATEGRAY LIGHTSTEELBLUE4 SANDYBROWN SIENNA SIENNA3 SPRINGGREEN3 YELLOW3 ( BLACK BLUE3 GRAY51 GRAY66 LIGHTGOLDENROD4 LIGHTSLATEGRAY LIGHTSTEELBLUE4 SANDYBROWN SIENNA SIENNA3 SPRINGGREEN3 YELLOW3 )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 135 -max_faults 0
+checkxstat D_First -n0 19 -n1 28 -n2 0 -total 47 -withname 47 -withcolor 17 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLACK BLUE3 GRAY51 GRAY66 LIGHTGOLDENROD4 LIGHTSLATEGRAY LIGHTSTEELBLUE4 SANDYBROWN SIENNA SIENNA3 SPRINGGREEN3 YELLOW3 } -nbcolors 12 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 17 -shell 17 -face 609 -shape 3807
+checkstatshape res_1 -solid 27 -shell 27 -face 738 -freewire 0 -freeedge 0 -sharededge 1527
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.003481079389 -avg 0.0001334936167]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 135 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 135 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 19 -n1 28 -n2 0 -total 47 -withname 47 -withcolor 17 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 12 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 19 -n1 28 -n2 0 -total 47 -withname 47 -withcolor 17 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLACK BLUE3 GRAY51 GRAY66 LIGHTGOLDENROD4 LIGHTSLATEGRAY LIGHTSTEELBLUE4 SANDYBROWN SIENNA SIENNA3 SPRINGGREEN3 YELLOW3 } -nbcolors 12 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 17 -shell 17 -face 609 -shape 3807 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 27 -shell 27 -face 738 -freewire 0 -freeedge 0 -sharededge 1527 -max_solid 27 -max_shell 27 -max_face 738 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.003481079391 -avg 0.0001334080552 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj7_b1-ct-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 2 ( 13 ) Summary = 2 ( 13 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 403 ( 403 ) Summary = 2339 ( 2339 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 403 ( 403 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 985 ( 985 )
-TOLERANCE : MaxTol = 0.00694845675 ( 0.006948526234 ) AvgTol = 0.001372890784 ( 0.001372901267 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 30 ( 30 ) N2Labels = 0 ( 0 ) TotalLabels = 31 ( 31 ) NameLabels = 1 ( 1 ) ColorLabels = 31 ( 31 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = CYAN1 LIGHTSTEELBLUE1 ( CYAN1 LIGHTSTEELBLUE1 )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 13 -max_faults 0
+checkxstat D_First -n0 1 -n1 30 -n2 0 -total 31 -withname 1 -withcolor 31 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { CYAN1 LIGHTSTEELBLUE1 } -nbcolors 2 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 403 -shape 2339
+checkstatshape res_1 -solid 1 -shell 1 -face 403 -freewire 0 -freeedge 0 -sharededge 985
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.006948526234 -avg 0.001372901267]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 13 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 30 -n2 0 -total 31 -withname 1 -withcolor 31 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 2 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 30 -n2 0 -total 31 -withname 1 -withcolor 31 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { CYAN1 LIGHTSTEELBLUE1 } -nbcolors 2 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 403 -shape 2339 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 403 -freewire 0 -freeedge 0 -sharededge 985 -max_solid 1 -max_shell 1 -max_face 403 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.00694845675 -avg 0.001372890784 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: STATSHAPE : Faulty"
puts "TODO CR23096 ALL: TOLERANCE : Faulty"
-
set filename trj7_b1-ec-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 2 ) Warnings = 4 ( 29 ) Summary = 4 ( 31 )
-CHECKSHAPE : Wires = 1 ( 2 ) Faces = 1 ( 2 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 416 ( 415 ) Summary = 2778 ( 2760 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 416 ( 415 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 1194 ( 1178 )
-TOLERANCE : MaxTol = 133200.3972 ( 0.9492387908 ) AvgTol = 320.1207295 ( 0.0392895506 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 28 ( 28 ) N2Labels = 0 ( 0 ) TotalLabels = 29 ( 29 ) NameLabels = 1 ( 1 ) ColorLabels = 29 ( 29 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 1 ( 1 ) Volume = 1 ( 1 ) Area = 1 ( 1 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = BLUE4 MATRAGRAY ( BLUE4 MATRAGRAY )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 30 -max_faults 2
+checkxstat D_First -n0 1 -n1 28 -n2 0 -total 29 -withname 1 -withcolor 29 -withlayer 0 -centroid 1 -volume 1 -area 1 -colors { BLUE4 MATRAGRAY } -nbcolors 2 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 2 -max_faces 2 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 415 -shape 2760
+checkstatshape res_1 -solid 1 -shell 1 -face 415 -freewire 0 -freeedge 0 -sharededge 1178
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.9492387908 -avg 0.0392895506]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 30 -max_faults 2
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 28 -n2 0 -total 29 -withname 1 -withcolor 29 -withlayer 0 -centroid 1 -volume 1 -area 1 -nbcolors 2 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 28 -n2 0 -total 29 -withname 1 -withcolor 29 -withlayer 0 -centroid 1 -volume 1 -area 1 -colors { BLUE4 MATRAGRAY } -nbcolors 2 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 2 -max_faces 2 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 1 -max_faces 1 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 416 -shape 2778 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 416 -freewire 0 -freeedge 0 -sharededge 1194 -max_solid 1 -max_shell 1 -max_face 415 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 133200.3972 -avg 320.1207295 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj7_b1-pe-203.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 2 ( 12 ) Summary = 2 ( 12 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 371 ( 371 ) Summary = 2101 ( 2101 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 371 ( 371 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 865 ( 865 )
-TOLERANCE : MaxTol = 0.003827431453 ( 0.009890984488 ) AvgTol = 0.000523307756 ( 0.001598027633 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 28 ( 28 ) N2Labels = 0 ( 0 ) TotalLabels = 29 ( 29 ) NameLabels = 1 ( 1 ) ColorLabels = 28 ( 28 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 1 ( 1 ) Volume = 1 ( 1 ) Area = 1 ( 1 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = LIGHTSLATEGRAY ( LIGHTSLATEGRAY )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 12 -max_faults 0
+checkxstat D_First -n0 1 -n1 28 -n2 0 -total 29 -withname 1 -withcolor 28 -withlayer 0 -centroid 1 -volume 1 -area 1 -colors { LIGHTSLATEGRAY } -nbcolors 1 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 371 -shape 2101
+checkstatshape res_1 -solid 1 -shell 1 -face 371 -freewire 0 -freeedge 0 -sharededge 865
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.009890984488 -avg 0.001598027633]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 12 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 28 -n2 0 -total 29 -withname 1 -withcolor 28 -withlayer 0 -centroid 1 -volume 1 -area 1 -nbcolors 1 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 28 -n2 0 -total 29 -withname 1 -withcolor 28 -withlayer 0 -centroid 1 -volume 1 -area 1 -colors { LIGHTSLATEGRAY } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 371 -shape 2101 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 371 -freewire 0 -freeedge 0 -sharededge 865 -max_solid 1 -max_shell 1 -max_face 371 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.003827431453 -avg 0.000523307756 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj7_b1-pe-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 2 ( 12 ) Summary = 2 ( 12 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 371 ( 371 ) Summary = 2101 ( 2101 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 371 ( 371 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 865 ( 865 )
-TOLERANCE : MaxTol = 0.003827431453 ( 0.009890984488 ) AvgTol = 0.000523307756 ( 0.001598027633 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 28 ( 28 ) N2Labels = 0 ( 0 ) TotalLabels = 29 ( 29 ) NameLabels = 1 ( 1 ) ColorLabels = 28 ( 28 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 1 ( 1 ) Volume = 1 ( 1 ) Area = 1 ( 1 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = LIGHTSLATEGRAY ( LIGHTSLATEGRAY )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 12 -max_faults 0
+checkxstat D_First -n0 1 -n1 28 -n2 0 -total 29 -withname 1 -withcolor 28 -withlayer 0 -centroid 1 -volume 1 -area 1 -colors { LIGHTSLATEGRAY } -nbcolors 1 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 371 -shape 2101
+checkstatshape res_1 -solid 1 -shell 1 -face 371 -freewire 0 -freeedge 0 -sharededge 865
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.009890984488 -avg 0.001598027633]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 12 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 28 -n2 0 -total 29 -withname 1 -withcolor 28 -withlayer 0 -centroid 1 -volume 1 -area 1 -nbcolors 1 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 28 -n2 0 -total 29 -withname 1 -withcolor 28 -withlayer 0 -centroid 1 -volume 1 -area 1 -colors { LIGHTSLATEGRAY } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 371 -shape 2101 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 371 -freewire 0 -freeedge 0 -sharededge 865 -max_solid 1 -max_shell 1 -max_face 371 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.003827431453 -avg 0.000523307756 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj7_b1-tc-203.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 4 ( 6 ) Summary = 4 ( 6 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 335 ( 335 ) Summary = 1923 ( 1923 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 335 ( 335 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 805 ( 805 )
-TOLERANCE : MaxTol = 0.03696608743 ( 0.07449683755 ) AvgTol = 0.009024715928 ( 0.01498533653 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 1 ( 1 ) Volume = 1 ( 1 ) Area = 1 ( 1 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 6 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 1 -volume 1 -area 1 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 335 -shape 1923
+checkstatshape res_1 -solid 1 -shell 1 -face 335 -freewire 0 -freeedge 0 -sharededge 805
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.07449683755 -avg 0.01498533653]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 6 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 1 -volume 1 -area 1 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 1 -volume 1 -area 1 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 335 -shape 1923 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 335 -freewire 0 -freeedge 0 -sharededge 805 -max_solid 1 -max_shell 1 -max_face 335 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.03696608743 -avg 0.009024715928 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj7_k1-al-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 23 ( 23 ) Summary = 23 ( 23 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 3 ( 3 ) Face = 57 ( 57 ) Summary = 417 ( 417 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 3 ( 3 ) Face = 57 ( 57 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 177 ( 177 )
-TOLERANCE : MaxTol = 0.001141394308 ( 0.009811807981 ) AvgTol = 0.0001654781889 ( 0.0007151230078 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 3 ( 3 ) N2Labels = 0 ( 0 ) TotalLabels = 4 ( 4 ) NameLabels = 1 ( 1 ) ColorLabels = 3 ( 3 ) LayerLabels = 2 ( 2 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = GRAY61 ( GRAY61 )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = L1 ( L1 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 23 -max_faults 0
+checkxstat D_First -n0 1 -n1 3 -n2 0 -total 4 -withname 1 -withcolor 3 -withlayer 2 -centroid 0 -volume 0 -area 0 -colors { GRAY61 } -nbcolors 1 -layers { L1 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 3 -face 57 -shape 417
+checkstatshape res_1 -solid 0 -shell 3 -face 57 -freewire 0 -freeedge 0 -sharededge 177
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.009811807981 -avg 0.0007151230078]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 23 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 23 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 3 -n2 0 -total 4 -withname 1 -withcolor 3 -withlayer 2 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 3 -n2 0 -total 4 -withname 1 -withcolor 3 -withlayer 2 -centroid 0 -volume 0 -area 0 -colors { GRAY61 } -nbcolors 1 -layers { L1 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 3 -face 57 -shape 417 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 3 -face 57 -freewire 0 -freeedge 0 -sharededge 177 -max_solid 0 -max_shell 3 -max_face 57 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.001141394308 -avg 0.0001654781889 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj7_k1-ec-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 45 ( 45 ) Summary = 290 ( 290 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 45 ( 45 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 117 ( 117 )
-TOLERANCE : MaxTol = 1.140748349e-007 ( 1.14074835e-007 ) AvgTol = 1.003433159e-007 ( 1.003433159e-007 )
-LABELS : N0Labels = 2 ( 2 ) N1Labels = 1 ( 1 ) N2Labels = 0 ( 0 ) TotalLabels = 3 ( 3 ) NameLabels = 3 ( 3 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 2 -n1 1 -n2 0 -total 3 -withname 3 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 1 -face 45 -shape 290
+checkstatshape res_1 -solid 0 -shell 1 -face 45 -freewire 0 -freeedge 0 -sharededge 117
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.14074835e-007 -avg 1.003433159e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 2 -n1 1 -n2 0 -total 3 -withname 3 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 2 -n1 1 -n2 0 -total 3 -withname 3 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 1 -face 45 -shape 290 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 1 -face 45 -freewire 0 -freeedge 0 -sharededge 117 -max_solid 0 -max_shell 1 -max_face 45 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.140748349e-007 -avg 1.003433159e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj7_pm5-ts-203.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 22 ) Summary = 0 ( 22 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 16 ( 16 ) Shell = 16 ( 16 ) Face = 494 ( 494 ) Summary = 3259 ( 3259 )
-STATSHAPE : Solid = 26 ( 26 ) Shell = 26 ( 26 ) Face = 874 ( 874 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 1135 ( 1135 )
-TOLERANCE : MaxTol = 0.001020030728 ( 0.001020030728 ) AvgTol = 6.898953015e-006 ( 6.898953015e-006 )
-LABELS : N0Labels = 21 ( 21 ) N1Labels = 485 ( 485 ) N2Labels = 0 ( 0 ) TotalLabels = 506 ( 506 ) NameLabels = 42 ( 42 ) ColorLabels = 476 ( 476 ) LayerLabels = 16 ( 16 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 7 ( 7 )
-COLORS : Colors = DEEPSKYBLUE2 DODGERBLUE2 MAGENTA1 ORANGE ORANGERED RED WHITE ( DEEPSKYBLUE2 DODGERBLUE2 MAGENTA1 ORANGE ORANGERED RED WHITE )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 000 ( 000 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 22 -max_faults 0
+checkxstat D_First -n0 21 -n1 485 -n2 0 -total 506 -withname 42 -withcolor 476 -withlayer 16 -centroid 0 -volume 0 -area 0 -colors { DEEPSKYBLUE2 DODGERBLUE2 MAGENTA1 ORANGE ORANGERED RED WHITE } -nbcolors 7 -layers { 000 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 16 -shell 16 -face 494 -shape 3259
+checkstatshape res_1 -solid 26 -shell 26 -face 874 -freewire 0 -freeedge 0 -sharededge 1135
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.001020030728 -avg 6.898953015e-006]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 22 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 21 -n1 485 -n2 0 -total 506 -withname 42 -withcolor 476 -withlayer 16 -centroid 0 -volume 0 -area 0 -nbcolors 7 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 21 -n1 485 -n2 0 -total 506 -withname 42 -withcolor 476 -withlayer 16 -centroid 0 -volume 0 -area 0 -colors { DEEPSKYBLUE2 DODGERBLUE2 MAGENTA1 ORANGE ORANGERED RED WHITE } -nbcolors 7 -layers { 000 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 16 -shell 16 -face 494 -shape 3259 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 26 -shell 26 -face 874 -freewire 0 -freeedge 0 -sharededge 1135 -max_solid 26 -max_shell 26 -max_face 874 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.001020030728 -avg 6.898953015e-006 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj8_b1-ct-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 11 ( 28 ) Summary = 11 ( 28 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 403 ( 403 ) Summary = 2339 ( 2339 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 403 ( 403 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 985 ( 985 )
-TOLERANCE : MaxTol = 0.001828077728 ( 0.001828077728 ) AvgTol = 0.0002142764424 ( 0.0003099078585 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 403 ( 403 ) N2Labels = 0 ( 0 ) TotalLabels = 404 ( 404 ) NameLabels = 1 ( 1 ) ColorLabels = 404 ( 404 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 3 ( 3 )
-COLORS : Colors = CYAN1 LIGHTSTEELBLUE1 RED ( CYAN1 LIGHTSTEELBLUE1 RED )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 30 -max_faults 0
+checkxstat D_First -n0 1 -n1 403 -n2 0 -total 404 -withname 1 -withcolor 404 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { CYAN1 LIGHTSTEELBLUE1 RED } -nbcolors 3 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 403 -shape 2339
+checkstatshape res_1 -solid 1 -shell 1 -face 403 -freewire 0 -freeedge 0 -sharededge 985
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.001828077728 -avg 0.0003099078585]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 30 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 11 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 403 -n2 0 -total 404 -withname 1 -withcolor 404 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 3 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 403 -n2 0 -total 404 -withname 1 -withcolor 404 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { CYAN1 LIGHTSTEELBLUE1 RED } -nbcolors 3 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 403 -shape 2339 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 403 -freewire 0 -freeedge 0 -sharededge 985 -max_solid 1 -max_shell 1 -max_face 403 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.001828077728 -avg 0.0002142764424 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj8_b1-ec-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 1 ( 26 ) Summary = 1 ( 26 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 415 ( 415 ) Summary = 2769 ( 2754 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 415 ( 415 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 1190 ( 1175 )
-TOLERANCE : MaxTol = 0.09895712553 ( 0.9492387908 ) AvgTol = 0.01313889085 ( 0.04014418394 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 28 ( 28 ) N2Labels = 0 ( 0 ) TotalLabels = 29 ( 29 ) NameLabels = 1 ( 1 ) ColorLabels = 29 ( 29 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 1 ( 1 ) Volume = 1 ( 1 ) Area = 1 ( 1 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = BLUE4 MATRAGRAY ( BLUE4 MATRAGRAY )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 26 -max_faults 0
+checkxstat D_First -n0 1 -n1 28 -n2 0 -total 29 -withname 1 -withcolor 29 -withlayer 0 -centroid 1 -volume 1 -area 1 -colors { BLUE4 MATRAGRAY } -nbcolors 2 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 415 -shape 2754
+checkstatshape res_1 -solid 1 -shell 1 -face 415 -freewire 0 -freeedge 0 -sharededge 1175
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.9492387908 -avg 0.04014418394]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 26 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 28 -n2 0 -total 29 -withname 1 -withcolor 29 -withlayer 0 -centroid 1 -volume 1 -area 1 -nbcolors 2 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 28 -n2 0 -total 29 -withname 1 -withcolor 29 -withlayer 0 -centroid 1 -volume 1 -area 1 -colors { BLUE4 MATRAGRAY } -nbcolors 2 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 415 -shape 2769 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 415 -freewire 0 -freeedge 0 -sharededge 1190 -max_solid 1 -max_shell 1 -max_face 415 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.09895712553 -avg 0.01313889085 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj8_b1-in-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 32 ( 55 ) Summary = 32 ( 55 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 346 ( 346 ) Summary = 2106 ( 2106 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 346 ( 346 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 880 ( 880 )
-TOLERANCE : MaxTol = 0.008701080699 ( 0.008701080695 ) AvgTol = 0.0004033161467 ( 0.0004033855141 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = GRAY65 ( GRAY65 )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 55 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { GRAY65 } -nbcolors 1 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 346 -shape 2106
+checkstatshape res_1 -solid 1 -shell 1 -face 346 -freewire 0 -freeedge 0 -sharededge 880
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.008701080695 -avg 0.0004033855141]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 55 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 32 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { GRAY65 } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 346 -shape 2106 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 346 -freewire 0 -freeedge 0 -sharededge 880 -max_solid 1 -max_shell 1 -max_face 346 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.008701080699 -avg 0.0004033161467 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
-
set filename trj8_b1-tc-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 1 ) Summary = 0 ( 1 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 339 ( 339 ) Summary = 1941 ( 1941 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 339 ( 339 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 810 ( 810 )
-TOLERANCE : MaxTol = 0.03775853832 ( 0.05770441607 ) AvgTol = 0.009180726225 ( 0.01351048369 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 22 ( 22 ) N2Labels = 0 ( 0 ) TotalLabels = 23 ( 23 ) NameLabels = 1 ( 1 ) ColorLabels = 23 ( 23 ) LayerLabels = 1 ( 1 )
-PROPS : Centroid = 1 ( 1 ) Volume = 1 ( 1 ) Area = 1 ( 1 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = GRAY75 LIGHTSTEELBLUE2 ( GRAY75 LIGHTSTEELBLUE2 )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 030 ( 030 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+checkxstat D_First -n0 1 -n1 22 -n2 0 -total 23 -withname 1 -withcolor 23 -withlayer 1 -centroid 1 -volume 1 -area 1 -colors { GRAY75 LIGHTSTEELBLUE2 } -nbcolors 2 -layers { 030 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 339 -shape 1941
+checkstatshape res_1 -solid 1 -shell 1 -face 339 -freewire 0 -freeedge 0 -sharededge 810
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.05770441607 -avg 0.01351048369]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 22 -n2 0 -total 23 -withname 1 -withcolor 23 -withlayer 1 -centroid 1 -volume 1 -area 1 -nbcolors 2 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 22 -n2 0 -total 23 -withname 1 -withcolor 23 -withlayer 1 -centroid 1 -volume 1 -area 1 -colors { GRAY75 LIGHTSTEELBLUE2 } -nbcolors 2 -layers { 030 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 339 -shape 1941 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 339 -freewire 0 -freeedge 0 -sharededge 810 -max_solid 1 -max_shell 1 -max_face 339 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.03775853832 -avg 0.009180726225 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj8_k1-db-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 14 ( 14 ) Summary = 14 ( 14 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 58 ( 58 ) Summary = 367 ( 367 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 58 ( 58 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 149 ( 149 )
-TOLERANCE : MaxTol = 0.006251011624 ( 0.006251011625 ) AvgTol = 0.001208891819 ( 0.001208891819 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 58 ( 58 ) N2Labels = 0 ( 0 ) TotalLabels = 59 ( 59 ) NameLabels = 1 ( 1 ) ColorLabels = 59 ( 59 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = DEEPPINK2 DEEPPINK2 ( DEEPPINK2 DEEPPINK2 )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 14 -max_faults 0
+checkxstat D_First -n0 1 -n1 58 -n2 0 -total 59 -withname 1 -withcolor 59 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { DEEPPINK2 DEEPPINK2 } -nbcolors 2 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 1 -face 58 -shape 367
+checkstatshape res_1 -solid 0 -shell 1 -face 58 -freewire 0 -freeedge 0 -sharededge 149
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.006251011625 -avg 0.001208891819]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 14 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 14 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 58 -n2 0 -total 59 -withname 1 -withcolor 59 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 2 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 58 -n2 0 -total 59 -withname 1 -withcolor 59 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { DEEPPINK2 DEEPPINK2 } -nbcolors 2 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 1 -face 58 -shape 367 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 1 -face 58 -freewire 0 -freeedge 0 -sharededge 149 -max_solid 0 -max_shell 1 -max_face 58 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.006251011624 -avg 0.001208891819 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj8_pm6-ac-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 14 ( 35 ) Summary = 14 ( 35 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 445 ( 445 ) Summary = 2937 ( 2879 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 445 ( 445 ) FreeWire = 0 ( 0 ) FreeEdge = 56 ( 56 ) SharedEdge = 1140 ( 1138 )
-TOLERANCE : MaxTol = 0.007489276519 ( 0.007492673692 ) AvgTol = 0.0001042245368 ( 0.0001043222816 )
-LABELS : N0Labels = 3 ( 3 ) N1Labels = 58 ( 58 ) N2Labels = 0 ( 0 ) TotalLabels = 61 ( 61 ) NameLabels = 5 ( 5 ) ColorLabels = 57 ( 57 ) LayerLabels = 57 ( 57 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = PURPLE WHITE ( PURPLE WHITE )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 0 ( 0 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 35 -max_faults 0
+checkxstat D_First -n0 3 -n1 58 -n2 0 -total 61 -withname 5 -withcolor 57 -withlayer 57 -centroid 0 -volume 0 -area 0 -colors { PURPLE WHITE } -nbcolors 2 -layers { 0 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 445 -shape 2879
+checkstatshape res_1 -solid 1 -shell 1 -face 445 -freewire 0 -freeedge 56 -sharededge 1138
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.007492673692 -avg 0.0001043222816]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 35 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 14 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3 -n1 58 -n2 0 -total 61 -withname 5 -withcolor 57 -withlayer 57 -centroid 0 -volume 0 -area 0 -nbcolors 2 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 58 -n2 0 -total 61 -withname 5 -withcolor 57 -withlayer 57 -centroid 0 -volume 0 -area 0 -colors { PURPLE WHITE } -nbcolors 2 -layers { 0 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 445 -shape 2937 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 445 -freewire 0 -freeedge 56 -sharededge 1140 -max_solid 1 -max_shell 1 -max_face 445 -max_freewire 0 -max_freeedge 56
+checkmaxtol res_2 -tol 0.007489276519 -avg 0.0001042245368 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj8_pm6-in-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 51 ( 65 ) Summary = 51 ( 65 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 474 ( 474 ) Summary = 2872 ( 2872 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 474 ( 474 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 1180 ( 1180 )
-TOLERANCE : MaxTol = 0.0607818994 ( 0.06078250721 ) AvgTol = 0.00290702214 ( 0.002948262692 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = GRAY66 ( GRAY66 )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 65 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { GRAY66 } -nbcolors 1 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 474 -shape 2872
+checkstatshape res_1 -solid 1 -shell 1 -face 474 -freewire 0 -freeedge 0 -sharededge 1180
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.06078250721 -avg 0.002948262692]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 65 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 51 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { GRAY66 } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 474 -shape 2872 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 474 -freewire 0 -freeedge 0 -sharededge 1180 -max_solid 1 -max_shell 1 -max_face 474 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.0607818994 -avg 0.00290702214 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj9_b2-ac-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 12 ( 17 ) Summary = 12 ( 17 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 2 ( 2 ) Face = 317 ( 317 ) Summary = 2047 ( 2047 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 2 ( 2 ) Face = 317 ( 317 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 857 ( 857 )
-TOLERANCE : MaxTol = 0.1005256507 ( 0.1005256507 ) AvgTol = 0.0006882150087 ( 0.000688621996 )
-LABELS : N0Labels = 2 ( 2 ) N1Labels = 1 ( 1 ) N2Labels = 0 ( 0 ) TotalLabels = 3 ( 3 ) NameLabels = 3 ( 3 ) ColorLabels = 1 ( 1 ) LayerLabels = 1 ( 1 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = GRAY73 ( GRAY73 )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 0 ( 0 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 17 -max_faults 0
+checkxstat D_First -n0 2 -n1 1 -n2 0 -total 3 -withname 3 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { GRAY73 } -nbcolors 1 -layers { 0 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 2 -face 317 -shape 2047
+checkstatshape res_1 -solid 1 -shell 2 -face 317 -freewire 0 -freeedge 0 -sharededge 857
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.1005256507 -avg 0.000688621996]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 17 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 12 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 2 -n1 1 -n2 0 -total 3 -withname 3 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 2 -n1 1 -n2 0 -total 3 -withname 3 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { GRAY73 } -nbcolors 1 -layers { 0 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 2 -face 317 -shape 2047 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 2 -face 317 -freewire 0 -freeedge 0 -sharededge 857 -max_solid 1 -max_shell 2 -max_face 317 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.1005256507 -avg 0.0006882150087 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
-
set filename trj9_b2-oc-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 10 ( 5 ) Summary = 10 ( 5 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 250 ( 250 ) Summary = 1618 ( 1618 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 250 ( 250 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 672 ( 672 )
-TOLERANCE : MaxTol = 0.002562040373 ( 0.005004494964 ) AvgTol = 2.080413824e-005 ( 6.882111124e-005 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 1 ( 1 ) Volume = 1 ( 1 ) Area = 1 ( 1 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 3 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 1 -volume 1 -area 1 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 250 -shape 1618
+checkstatshape res_1 -solid 1 -shell 1 -face 250 -freewire 0 -freeedge 0 -sharededge 672
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.005004494964 -avg 6.882111124e-005]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 3 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 1 -volume 1 -area 1 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 1 -volume 1 -area 1 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 250 -shape 1618 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 250 -freewire 0 -freeedge 0 -sharededge 672 -max_solid 1 -max_shell 1 -max_face 250 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.002562040373 -avg 2.080413824e-005 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename turbine2.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 0 ( 0 ) Summary = 3067 ( 2301 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 0 ( 0 ) Face = 0 ( 0 ) FreeWire = 0 ( 0 ) FreeEdge = 766 ( 766 ) SharedEdge = 766 ( 766 )
-TOLERANCE : MaxTol = 1e-007 ( 1e-007 ) AvgTol = 1e-007 ( 1e-007 )
-LABELS : N0Labels = 2 ( 2 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 2 ( 2 ) NameLabels = 2 ( 2 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 2 -n1 0 -n2 0 -total 2 -withname 2 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 0 -shape 2301
+checkstatshape res_1 -solid 0 -shell 0 -face 0 -freewire 0 -freeedge 766 -sharededge 766
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-007 -avg 1e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 2 -n1 0 -n2 0 -total 2 -withname 2 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 2 -n1 0 -n2 0 -total 2 -withname 2 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 0 -face 0 -shape 3067 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 0 -face 0 -freewire 0 -freeedge 766 -sharededge 766 -max_solid 0 -max_shell 0 -max_face 0 -max_freewire 0 -max_freeedge 766
+checkmaxtol res_2 -tol 1e-007 -avg 1e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
-
set filename welle_solid.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 52 ( 0 ) Summary = 52 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 469 ( 469 ) Summary = 2647 ( 2647 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 469 ( 469 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 1080 ( 1080 )
-TOLERANCE : MaxTol = 0.006604322767 ( 0.00750479523 ) AvgTol = 0.0008116667087 ( 0.002278120543 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 469 -shape 2647
+checkstatshape res_1 -solid 1 -shell 1 -face 469 -freewire 0 -freeedge 0 -sharededge 1080
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.00750479523 -avg 0.002278120543]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 52 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 469 -shape 2647 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 469 -freewire 0 -freeedge 0 -sharededge 1080 -max_solid 1 -max_shell 1 -max_face 469 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.006604322767 -avg 0.0008116667087 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj7_b1-in-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 32 ( 55 ) Summary = 32 ( 55 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 346 ( 346 ) Summary = 2106 ( 2106 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 346 ( 346 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 880 ( 880 )
-TOLERANCE : MaxTol = 0.008701080699 ( 0.008701080695 ) AvgTol = 0.0004033161467 ( 0.0004033855141 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = GRAY65 ( GRAY65 )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 55 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { GRAY65 } -nbcolors 1 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 346 -shape 2106
+checkstatshape res_1 -solid 1 -shell 1 -face 346 -freewire 0 -freeedge 0 -sharededge 880
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.008701080695 -avg 0.0004033855141]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 55 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 32 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { GRAY65 } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 346 -shape 2106 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 346 -freewire 0 -freeedge 0 -sharededge 880 -max_solid 1 -max_shell 1 -max_face 346 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.008701080699 -avg 0.0004033161467 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename bm4_sd_eye_a.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 82 ( 82 ) Summary = 476 ( 476 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 82 ( 82 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 199 ( 199 )
-TOLERANCE : MaxTol = 7.174253459e-007 ( 7.174254492e-007 ) AvgTol = 2.469633936e-007 ( 2.46963419e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = MATRAGRAY ( MATRAGRAY )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { MATRAGRAY } -nbcolors 1 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 82 -shape 476
+checkstatshape res_1 -solid 1 -shell 1 -face 82 -freewire 0 -freeedge 0 -sharededge 199
+set max_tol_res_1 [checkmaxtol res_1 -tol 7.174254492e-007 -avg 2.46963419e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { MATRAGRAY } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 82 -shape 476 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 82 -freewire 0 -freeedge 0 -sharededge 199 -max_solid 1 -max_shell 1 -max_face 82 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 7.174253459e-007 -avg 2.469633936e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
set filename bm4_sd_eye_c.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 4 ) Warnings = 0 ( 4 ) Summary = 0 ( 8 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 78 ( 78 ) Summary = 467 ( 467 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 78 ( 78 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 199 ( 199 )
-TOLERANCE : MaxTol = 7.174253459e-07 ( 7.174254492e-07 ) AvgTol = 2.394980588e-07 ( 2.394974547e-07 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = MATRAGRAY ( MATRAGRAY )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 4
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { MATRAGRAY } -nbcolors 1 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 1 -face 78 -shape 467
+checkstatshape res_1 -solid 0 -shell 1 -face 78 -freewire 0 -freeedge 0 -sharededge 199
+set max_tol_res_1 [checkmaxtol res_1 -tol 7.174254492e-07 -avg 2.394974547e-07]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 4
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { MATRAGRAY } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 1 -face 78 -shape 467 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 1 -face 78 -freewire 0 -freeedge 0 -sharededge 199 -max_solid 0 -max_shell 1 -max_face 78 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 7.174253459e-07 -avg 2.394980588e-07 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
-
set filename bm4_sd_seal_a.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 150 ( 13 ) Summary = 150 ( 13 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 3 ( 3 ) Face = 540 ( 540 ) Summary = 2968 ( 2968 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 3 ( 3 ) Face = 540 ( 540 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 1202 ( 1202 )
-TOLERANCE : MaxTol = 6.818588609e-006 ( 6.818587037e-006 ) AvgTol = 8.112277988e-007 ( 8.079385019e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = MATRAGRAY ( MATRAGRAY )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 13 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { MATRAGRAY } -nbcolors 1 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 3 -face 540 -shape 2968
+checkstatshape res_1 -solid 1 -shell 3 -face 540 -freewire 0 -freeedge 0 -sharededge 1202
+set max_tol_res_1 [checkmaxtol res_1 -tol 6.818587037e-006 -avg 8.079385019e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 13 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 150 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { MATRAGRAY } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 3 -face 540 -shape 2968 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 3 -face 540 -freewire 0 -freeedge 0 -sharededge 1202 -max_solid 1 -max_shell 3 -max_face 540 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 6.818588609e-006 -avg 8.112277988e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
-
set filename bm4_sd_seal_c.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 150 ( 13 ) Summary = 150 ( 13 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 3 ( 3 ) Face = 540 ( 540 ) Summary = 2968 ( 2968 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 3 ( 3 ) Face = 540 ( 540 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 1202 ( 1202 )
-TOLERANCE : MaxTol = 6.818588609e-006 ( 6.818587037e-006 ) AvgTol = 8.112277988e-007 ( 8.079385019e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = MATRAGRAY ( MATRAGRAY )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 13 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { MATRAGRAY } -nbcolors 1 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 3 -face 540 -shape 2968
+checkstatshape res_1 -solid 1 -shell 3 -face 540 -freewire 0 -freeedge 0 -sharededge 1202
+set max_tol_res_1 [checkmaxtol res_1 -tol 6.818587037e-006 -avg 8.079385019e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 13 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 150 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { MATRAGRAY } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 3 -face 540 -shape 2968 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 3 -face 540 -freewire 0 -freeedge 0 -sharededge 1202 -max_solid 1 -max_shell 3 -max_face 540 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 6.818588609e-006 -avg 8.112277988e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj10_b2-in-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 12 ( 17 ) Summary = 12 ( 17 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 2 ( 2 ) Face = 306 ( 306 ) Summary = 1975 ( 1975 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 2 ( 2 ) Face = 306 ( 306 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 826 ( 826 )
-TOLERANCE : MaxTol = 0.1005256507 ( 0.1005256507 ) AvgTol = 0.0007133931622 ( 0.0007138150401 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = GRAY ( GRAY )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 17 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { GRAY } -nbcolors 1 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 2 -face 306 -shape 1975
+checkstatshape res_1 -solid 1 -shell 2 -face 306 -freewire 0 -freeedge 0 -sharededge 826
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.1005256507 -avg 0.0007138150401]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 17 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 12 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { GRAY } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 2 -face 306 -shape 1975 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 2 -face 306 -freewire 0 -freeedge 0 -sharededge 826 -max_solid 1 -max_shell 2 -max_face 306 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.1005256507 -avg 0.0007133931622 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj10_b2-pe-203.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 3 ( 9 ) Summary = 3 ( 9 )
-CHECKSHAPE : Wires = 1 ( 1 ) Faces = 1 ( 1 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 252 ( 252 ) Summary = 1622 ( 1622 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 252 ( 252 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 673 ( 673 )
-TOLERANCE : MaxTol = 0.003900261304 ( 0.007833404346 ) AvgTol = 9.450808397e-005 ( 0.0001357380201 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 1 ( 1 ) Volume = 1 ( 1 ) Area = 1 ( 1 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = WHITE ( WHITE )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 9 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 1 -volume 1 -area 1 -colors { WHITE } -nbcolors 1 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 1 -max_faces 1 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 252 -shape 1622
+checkstatshape res_1 -solid 1 -shell 1 -face 252 -freewire 0 -freeedge 0 -sharededge 673
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.007833404346 -avg 0.0001357380201]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 9 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 1 -volume 1 -area 1 -nbcolors 1 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 1 -volume 1 -area 1 -colors { WHITE } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 1 -max_faces 1 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 1 -max_faces 1 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 252 -shape 1622 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 252 -freewire 0 -freeedge 0 -sharededge 673 -max_solid 1 -max_shell 1 -max_face 252 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.003900261304 -avg 9.450808397e-005 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
-set filename db_soapbox-A.stp
puts "TODO CR23096 ALL: TPSTAT : Faulty"
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 29 ( 30 ) Summary = 29 ( 30 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 108 ( 108 ) Summary = 652 ( 652 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 108 ( 108 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 270 ( 270 )
-TOLERANCE : MaxTol = 0.1381688089 ( 0.1381688071 ) AvgTol = 0.01295053427 ( 0.0152247749 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 1 ( 1 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = GREEN4 ( GREEN4 )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 0 ( { 0} )
-
-}
+set filename db_soapbox-A.stp
+
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 28 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { GREEN4 } -nbcolors 1 -layers { " 0" } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 108 -shape 652
+checkstatshape res_1 -solid 1 -shell 1 -face 108 -freewire 0 -freeedge 0 -sharededge 270
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.1381688071 -avg 0.0152247749]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 28 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 30 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { GREEN4 } -nbcolors 1 -layers { 0 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 108 -shape 652 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 108 -freewire 0 -freeedge 0 -sharededge 270 -max_solid 1 -max_shell 1 -max_face 108 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.1381688089 -avg 0.01295053427 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
-set filename db_soapbox-B.stp
puts "TODO CR23096 ALL: TPSTAT : Faulty"
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 32 ( 32 ) Summary = 32 ( 32 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 108 ( 108 ) Summary = 652 ( 652 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 108 ( 108 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 270 ( 270 )
-TOLERANCE : MaxTol = 0.1274164441 ( 0.1274164441 ) AvgTol = 0.01201852752 ( 0.01771888311 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 1 ( 1 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = GREEN4 ( GREEN4 )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 0 ( { 0} )
-
-}
+set filename db_soapbox-B.stp
+
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 30 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { GREEN4 } -nbcolors 1 -layers { " 0" } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 108 -shape 652
+checkstatshape res_1 -solid 1 -shell 1 -face 108 -freewire 0 -freeedge 0 -sharededge 270
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.1274164441 -avg 0.01771888311]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 30 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 32 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { GREEN4 } -nbcolors 1 -layers { 0 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 108 -shape 652 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 108 -freewire 0 -freeedge 0 -sharededge 270 -max_solid 1 -max_shell 1 -max_face 108 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.1274164441 -avg 0.01201852752 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj8_b1-md-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 21 ( 49 ) Summary = 21 ( 49 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 113 ( 113 ) Summary = 726 ( 726 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 113 ( 113 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 304 ( 304 )
-TOLERANCE : MaxTol = 0.000924662559 ( 0.0009246625273 ) AvgTol = 4.001921218e-005 ( 4.077466401e-005 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 1 ( 1 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = MAGENTA2 ( MAGENTA2 )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 7 ( 7 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 49 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { MAGENTA2 } -nbcolors 1 -layers { 7 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 113 -shape 726
+checkstatshape res_1 -solid 1 -shell 1 -face 113 -freewire 0 -freeedge 0 -sharededge 304
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.0009246625273 -avg 4.077466401e-005]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 49 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 21 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { MAGENTA2 } -nbcolors 1 -layers { 7 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 113 -shape 726 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 113 -freewire 0 -freeedge 0 -sharededge 304 -max_solid 1 -max_shell 1 -max_face 113 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.000924662559 -avg 4.001921218e-005 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj9_b2-in-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 12 ( 17 ) Summary = 12 ( 17 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 2 ( 2 ) Face = 306 ( 306 ) Summary = 1975 ( 1975 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 2 ( 2 ) Face = 306 ( 306 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 826 ( 826 )
-TOLERANCE : MaxTol = 0.1005256507 ( 0.1005256507 ) AvgTol = 0.0007133931622 ( 0.0007138150401 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = GRAY ( GRAY )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 17 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { GRAY } -nbcolors 1 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 2 -face 306 -shape 1975
+checkstatshape res_1 -solid 1 -shell 2 -face 306 -freewire 0 -freeedge 0 -sharededge 826
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.1005256507 -avg 0.0007138150401]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 17 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 12 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { GRAY } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 2 -face 306 -shape 1975 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 2 -face 306 -freewire 0 -freeedge 0 -sharededge 826 -max_solid 1 -max_shell 2 -max_face 306 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.1005256507 -avg 0.0007133931622 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj9_b2-pe-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 3 ( 9 ) Summary = 3 ( 9 )
-CHECKSHAPE : Wires = 1 ( 1 ) Faces = 1 ( 1 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 252 ( 252 ) Summary = 1622 ( 1622 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 252 ( 252 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 673 ( 673 )
-TOLERANCE : MaxTol = 0.005365460363 ( 0.007833404346 ) AvgTol = 9.982982836e-005 ( 0.0001410844712 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 1 ( 1 ) Volume = 1 ( 1 ) Area = 1 ( 1 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = WHITE ( WHITE )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 9 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 1 -volume 1 -area 1 -colors { WHITE } -nbcolors 1 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 1 -max_faces 1 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 252 -shape 1622
+checkstatshape res_1 -solid 1 -shell 1 -face 252 -freewire 0 -freeedge 0 -sharededge 673
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.007833404346 -avg 0.0001410844712]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 9 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 1 -volume 1 -area 1 -nbcolors 1 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 1 -volume 1 -area 1 -colors { WHITE } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 1 -max_faces 1 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 1 -max_faces 1 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 252 -shape 1622 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 252 -freewire 0 -freeedge 0 -sharededge 673 -max_solid 1 -max_shell 1 -max_face 252 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.005365460363 -avg 9.982982836e-005 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
-
set filename trj9_b2-sy-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 113 ( 103 ) Summary = 113 ( 103 )
-CHECKSHAPE : Wires = 2 ( 2 ) Faces = 2 ( 2 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 260 ( 260 ) Summary = 1745 ( 1745 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 260 ( 260 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 730 ( 730 )
-TOLERANCE : MaxTol = 0.004437798931 ( 0.03878259147 ) AvgTol = 0.0002767147005 ( 0.001694294606 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 1 ( 1 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = MAGENTA1 ( MAGENTA1 )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 0 ( { 0} )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 103 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { MAGENTA1 } -nbcolors 1 -layers { " 0" } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 2 -max_faces 2 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 260 -shape 1745
+checkstatshape res_1 -solid 1 -shell 1 -face 260 -freewire 0 -freeedge 0 -sharededge 730
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.03878259147 -avg 0.001694294606]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 103 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 113 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { MAGENTA1 } -nbcolors 1 -layers { 0 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 2 -max_faces 2 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 2 -max_faces 2 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 260 -shape 1745 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 260 -freewire 0 -freeedge 0 -sharededge 730 -max_solid 1 -max_shell 1 -max_face 260 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.004437798931 -avg 0.0002767147005 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj9_pm7-in-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 51 ( 65 ) Summary = 51 ( 65 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 474 ( 474 ) Summary = 2872 ( 2872 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 474 ( 474 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 1180 ( 1180 )
-TOLERANCE : MaxTol = 0.0607818994 ( 0.06078250721 ) AvgTol = 0.00290702214 ( 0.002948262692 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = GRAY66 ( GRAY66 )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 65 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { GRAY66 } -nbcolors 1 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 474 -shape 2872
+checkstatshape res_1 -solid 1 -shell 1 -face 474 -freewire 0 -freeedge 0 -sharededge 1180
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.06078250721 -avg 0.002948262692]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 65 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 51 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { GRAY66 } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 474 -shape 2872 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 474 -freewire 0 -freeedge 0 -sharededge 1180 -max_solid 1 -max_shell 1 -max_face 474 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.0607818994 -avg 0.00290702214 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename ug_turbine-A.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 58 ( 58 ) Summary = 319 ( 319 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 1 ( 1 ) Face = 58 ( 58 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 131 ( 131 )
-TOLERANCE : MaxTol = 1.225663151e-005 ( 1.225663088e-005 ) AvgTol = 1.692620711e-006 ( 1.692620773e-006 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = CYAN1 ( CYAN1 )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { CYAN1 } -nbcolors 1 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 1 -face 58 -shape 319
+checkstatshape res_1 -solid 0 -shell 1 -face 58 -freewire 0 -freeedge 0 -sharededge 131
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.225663088e-005 -avg 1.692620773e-006]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { CYAN1 } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 1 -face 58 -shape 319 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 1 -face 58 -freewire 0 -freeedge 0 -sharededge 131 -max_solid 0 -max_shell 1 -max_face 58 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1.225663151e-005 -avg 1.692620711e-006 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
-
set filename sd_soapbox-A.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 6 ( 0 ) Summary = 6 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 111 ( 111 ) Summary = 689 ( 689 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 111 ( 111 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 286 ( 286 )
-TOLERANCE : MaxTol = 6.842023688e-007 ( 6.84202055e-007 ) AvgTol = 1.98769779e-007 ( 1.987697803e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = MATRAGRAY ( MATRAGRAY )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 3 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { MATRAGRAY } -nbcolors 1 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 111 -shape 689
+checkstatshape res_1 -solid 1 -shell 1 -face 111 -freewire 0 -freeedge 0 -sharededge 286
+set max_tol_res_1 [checkmaxtol res_1 -tol 6.84202055e-007 -avg 1.987697803e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 3 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 6 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { MATRAGRAY } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 111 -shape 689 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 111 -freewire 0 -freeedge 0 -sharededge 286 -max_solid 1 -max_shell 1 -max_face 111 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 6.842023688e-007 -avg 1.98769779e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
-
set filename sd_soapbox-B.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 6 ( 0 ) Summary = 6 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 111 ( 111 ) Summary = 689 ( 689 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 111 ( 111 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 286 ( 286 )
-TOLERANCE : MaxTol = 6.842023688e-007 ( 6.84202055e-007 ) AvgTol = 1.98769779e-007 ( 1.987697802e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = MATRAGRAY ( MATRAGRAY )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 3 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { MATRAGRAY } -nbcolors 1 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 111 -shape 689
+checkstatshape res_1 -solid 1 -shell 1 -face 111 -freewire 0 -freeedge 0 -sharededge 286
+set max_tol_res_1 [checkmaxtol res_1 -tol 6.84202055e-007 -avg 1.987697802e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 3 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 6 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { MATRAGRAY } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 111 -shape 689 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 111 -freewire 0 -freeedge 0 -sharededge 286 -max_solid 1 -max_shell 1 -max_face 111 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 6.842023688e-007 -avg 1.98769779e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj6_b1-md-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 21 ( 49 ) Summary = 21 ( 49 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 113 ( 113 ) Summary = 726 ( 726 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 113 ( 113 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 304 ( 304 )
-TOLERANCE : MaxTol = 0.000924662559 ( 0.0009246625273 ) AvgTol = 4.001921218e-005 ( 4.077466401e-005 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 1 ( 1 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = MAGENTA2 ( MAGENTA2 )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 7 ( 7 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 49 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { MAGENTA2 } -nbcolors 1 -layers { 7 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 113 -shape 726
+checkstatshape res_1 -solid 1 -shell 1 -face 113 -freewire 0 -freeedge 0 -sharededge 304
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.0009246625273 -avg 4.077466401e-005]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 49 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 21 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { MAGENTA2 } -nbcolors 1 -layers { 7 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 113 -shape 726 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 113 -freewire 0 -freeedge 0 -sharededge 304 -max_solid 1 -max_shell 1 -max_face 113 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.000924662559 -avg 4.001921218e-005 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj6_b1-ug-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 1 ( 14 ) Summary = 1 ( 14 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 327 ( 327 ) Summary = 1895 ( 1895 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 327 ( 327 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 787 ( 787 )
-TOLERANCE : MaxTol = 0.01146233865 ( 0.01858460173 ) AvgTol = 0.002324025457 ( 0.003534492623 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 1 ( 1 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = INDIANRED1 ( INDIANRED1 )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 1 ( 1 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 15 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { INDIANRED1 } -nbcolors 1 -layers { 1 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 327 -shape 1895
+checkstatshape res_1 -solid 1 -shell 1 -face 327 -freewire 0 -freeedge 0 -sharededge 787
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.01858460173 -avg 0.003534492623]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 15 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { INDIANRED1 } -nbcolors 1 -layers { 1 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 327 -shape 1895 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 327 -freewire 0 -freeedge 0 -sharededge 787 -max_solid 1 -max_shell 1 -max_face 327 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.01146233865 -avg 0.002324025457 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename bm4_db_eye_a.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 4 ( 4 ) Summary = 4 ( 4 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 83 ( 83 ) Summary = 490 ( 490 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 83 ( 83 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 204 ( 204 )
-TOLERANCE : MaxTol = 0.003929037241 ( 0.03181394455 ) AvgTol = 0.0004814695376 ( 0.003318266161 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 1 ( 1 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = MAGENTA4 ( MAGENTA4 )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 0 ( { 0} )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { MAGENTA4 } -nbcolors 1 -layers { " 0" } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 83 -shape 490
+checkstatshape res_1 -solid 1 -shell 1 -face 83 -freewire 0 -freeedge 0 -sharededge 204
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.03181394455 -avg 0.003318266161]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { MAGENTA4 } -nbcolors 1 -layers { 0 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 83 -shape 490 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 83 -freewire 0 -freeedge 0 -sharededge 204 -max_solid 1 -max_shell 1 -max_face 83 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.003929037241 -avg 0.0004814695376 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename bm4_db_eye_b.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 4 ( 4 ) Summary = 4 ( 4 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 83 ( 83 ) Summary = 490 ( 490 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 83 ( 83 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 204 ( 204 )
-TOLERANCE : MaxTol = 0.003929037241 ( 0.03181394455 ) AvgTol = 0.0004809897221 ( 0.003317484731 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 1 ( 1 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = MAGENTA4 ( MAGENTA4 )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 0 ( { 0} )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { MAGENTA4 } -nbcolors 1 -layers { " 0" } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 83 -shape 490
+checkstatshape res_1 -solid 1 -shell 1 -face 83 -freewire 0 -freeedge 0 -sharededge 204
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.03181394455 -avg 0.003317484731]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { MAGENTA4 } -nbcolors 1 -layers { 0 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 83 -shape 490 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 83 -freewire 0 -freeedge 0 -sharededge 204 -max_solid 1 -max_shell 1 -max_face 83 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.003929037241 -avg 0.0004809897221 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename bm4_db_eye_c.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 4 ( 4 ) Summary = 4 ( 4 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 83 ( 83 ) Summary = 490 ( 490 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 83 ( 83 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 204 ( 204 )
-TOLERANCE : MaxTol = 0.007552761385 ( 0.03357940673 ) AvgTol = 0.0009865539933 ( 0.004986205427 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 1 ( 1 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = MAGENTA4 ( MAGENTA4 )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 0 ( { 0} )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { MAGENTA4 } -nbcolors 1 -layers { " 0" } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 83 -shape 490
+checkstatshape res_1 -solid 1 -shell 1 -face 83 -freewire 0 -freeedge 0 -sharededge 204
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.03357940673 -avg 0.004986205427]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { MAGENTA4 } -nbcolors 1 -layers { 0 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 83 -shape 490 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 83 -freewire 0 -freeedge 0 -sharededge 204 -max_solid 1 -max_shell 1 -max_face 83 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.007552761385 -avg 0.0009865539933 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj6_pm4-pe-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 4 ( 7 ) Summary = 4 ( 7 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 453 ( 453 ) Summary = 2835 ( 2835 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 453 ( 453 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 1169 ( 1169 )
-TOLERANCE : MaxTol = 0.03659878417 ( 0.07247642707 ) AvgTol = 0.001283268686 ( 0.005742789733 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 1 ( 1 ) Volume = 1 ( 1 ) Area = 1 ( 1 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = THISTLE ( THISTLE )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 8 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 1 -volume 1 -area 1 -colors { THISTLE } -nbcolors 1 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 453 -shape 2835
+checkstatshape res_1 -solid 1 -shell 1 -face 453 -freewire 0 -freeedge 0 -sharededge 1169
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.07247642707 -avg 0.005742789733]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 8 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 3 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 1 -volume 1 -area 1 -nbcolors 1 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 1 -volume 1 -area 1 -colors { THISTLE } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 453 -shape 2835 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 453 -freewire 0 -freeedge 0 -sharededge 1169 -max_solid 1 -max_shell 1 -max_face 453 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.03659878417 -avg 0.001283268686 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename BUC60810.stp
-set ref_data {
-DATA : Faulties = 0 ( 9 ) Warnings = 0 ( 0 ) Summary = 0 ( 9 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 77 ( 39 ) Summary = 77 ( 39 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 1 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 10 ( 10 ) Shell = 12 ( 12 ) Face = 269 ( 269 ) Summary = 1638 ( 1636 )
-STATSHAPE : Solid = 10 ( 10 ) Shell = 12 ( 12 ) Face = 269 ( 269 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 636 ( 636 )
-TOLERANCE : MaxTol = 0.01008857123 ( 0.01008857108 ) AvgTol = 0.0003104589496 ( 0.0003616303196 )
-LABELS : N0Labels = 3 ( 3 ) N1Labels = 2 ( 3 ) N2Labels = 0 ( 1 ) TotalLabels = 5 ( 7 ) NameLabels = 5 ( 5 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 9
+checkdoc "tpstat c" -max_warns 38 -max_faults 0
+checkxstat D_First -n0 3 -n1 3 -n2 1 -total 7 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 10 -shell 12 -face 269 -shape 1636
+checkstatshape res_1 -solid 10 -shell 12 -face 269 -freewire 0 -freeedge 0 -sharededge 636
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.01008857108 -avg 0.0003616303196]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 9
+checkdoc "tpstat c" -max_warns 38 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 52 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3 -n1 3 -n2 1 -total 7 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 1 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 10 -shell 12 -face 269 -shape 1638 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 10 -shell 12 -face 269 -freewire 0 -freeedge 0 -sharededge 636 -max_solid 10 -max_shell 12 -max_face 269 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.01008857123 -avg 0.0003104589496 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
-puts "TODO CR23096 ALL: Error: First - file was not read - exception "
-puts "TODO CR23096 ALL: Error : Here is reading problem"
-
+puts "TODO CR23096 ALL: Error: file tr9_r0301-pe-adjusted.stp was not read"
+puts "TODO CR23096 ALL: DATA : Faulty comparison ref number of faults in command data c with max possible"
+puts "TODO CR23096 ALL: Tcl Exception: res_1 is not a topological shape"
+puts "TODO CR23096 ALL: TEST INCOMPLETE"
set filename tr9_r0301-pe-adjusted.stp
+
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 9
+checkdoc "tpstat c" -max_warns 39 -max_faults 0
+checkxstat D_First -n0 3 -n1 3 -n2 1 -total 7 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 10 -shell 12 -face 269 -shape 1636
+checkstatshape res_1 -solid 10 -shell 12 -face 269 -freewire 0 -freeedge 0 -sharededge 636
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.01008857108 -avg 0.0003616303196]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 9
+checkdoc "tpstat c" -max_warns 39 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3 -n1 3 -n2 1 -total 7 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 1 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 10 -shell 12 -face 269 -shape 1638 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 10 -shell 12 -face 269 -freewire 0 -freeedge 0 -sharededge 636 -max_solid 10 -max_shell 12 -max_face 269 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.01008857123 -avg 0.0003104589496 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename TUBE1.stp
-set ref_data {
-DATA : Faulties = 0 ( 1435 ) Warnings = 0 ( 0 ) Summary = 0 ( 1435 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 1047 ) Summary = 0 ( 1047 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 211 ( 211 ) Shell = 212 ( 212 ) Face = 1585 ( 1585 ) Summary = 8951 ( 8951 )
-STATSHAPE : Solid = 211 ( 211 ) Shell = 212 ( 212 ) Face = 1585 ( 1585 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 3084 ( 3084 )
-TOLERANCE : MaxTol = 0.003688364238 ( 0.003688364252 ) AvgTol = 2.561768589e-05 ( 2.887753385e-05 )
-LABELS : N0Labels = 206 ( 206 ) N1Labels = 205 ( 205 ) N2Labels = 0 ( 0 ) TotalLabels = 411 ( 411 ) NameLabels = 411 ( 411 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 1435
+checkdoc "tpstat c" -max_warns 1047 -max_faults 0
+checkxstat D_First -n0 206 -n1 205 -n2 0 -total 411 -withname 411 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 211 -shell 212 -face 1585 -shape 8951
+checkstatshape res_1 -solid 211 -shell 212 -face 1585 -freewire 0 -freeedge 0 -sharededge 3084
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.003688364252 -avg 2.887753385e-05]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 1435
+checkdoc "tpstat c" -max_warns 1047 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 206 -n1 205 -n2 0 -total 411 -withname 411 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 206 -n1 205 -n2 0 -total 411 -withname 411 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 211 -shell 212 -face 1585 -shape 8951 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 211 -shell 212 -face 1585 -freewire 0 -freeedge 0 -sharededge 3084 -max_solid 211 -max_shell 212 -max_face 1585 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.003688364238 -avg 2.561768589e-05 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
puts "TODO CR23096 ALL: STATSHAPE : Faulty"
-
set filename tr9_r0601-db.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 169 ( 3 ) Summary = 169 ( 3 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 4252 ( 61 ) Face = 4252 ( 4252 ) Summary = 46792 ( 42470 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 4252 ( 61 ) Face = 4252 ( 4252 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 17172 ( 17172 )
-TOLERANCE : MaxTol = 0.01863822385 ( 0.02412563427 ) AvgTol = 2.362731616e-005 ( 0.0001293919275 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 4313 ( 4313 ) N2Labels = 0 ( 0 ) TotalLabels = 4314 ( 4314 ) NameLabels = 1 ( 1 ) ColorLabels = 4242 ( 4242 ) LayerLabels = 4252 ( 4252 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = RED WHITE ( RED WHITE )
-NLAYERS : NLayers = 40 ( 40 )
-LAYERS : Layers = 1 10 100 101 11 12 138 139 15 16 17 175 176 177 178 18 181 182 183 2 245 246 29 3 30 31 32 33 34 35 36 37 4 5 7 8 9 96 97 99 ( { 1} { 2} { 3} { 4} { 5} { 7} { 8} { 9} { 10} { 11} { 12} { 15} { 16} { 17} { 18} { 29} { 30} { 31} { 32} { 33} { 34} { 35} { 36} { 37} { 96} { 97} { 99} 100 101 138 139 175 176 177 178 181 182 183 245 246 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 3 -max_faults 0
+checkxstat D_First -n0 1 -n1 4313 -n2 0 -total 4314 -withname 1 -withcolor 4242 -withlayer 4252 -centroid 0 -volume 0 -area 0 -colors { RED WHITE } -nbcolors 2 -layers { " 1" " 2" " 3" " 4" " 5" " 7" " 8" " 9" " 10" " 11" " 12" " 15" " 16" " 17" " 18" " 29" " 30" " 31" " 32" " 33" " 34" " 35" " 36" " 37" " 96" " 97" " 99" "100" "101" "138" "139" "175" "176" "177" "178" "181" "182" "183" "245" "246" } -nblayers 40
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 61 -face 4252 -shape 42470
+checkstatshape res_1 -solid 0 -shell 61 -face 4252 -freewire 0 -freeedge 0 -sharededge 17172
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.02412563427 -avg 0.0001293919275]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 3 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 169 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 4313 -n2 0 -total 4314 -withname 1 -withcolor 4242 -withlayer 4252 -centroid 0 -volume 0 -area 0 -nbcolors 2 -nblayers 40
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 4313 -n2 0 -total 4314 -withname 1 -withcolor 4242 -withlayer 4252 -centroid 0 -volume 0 -area 0 -colors { RED WHITE } -nbcolors 2 -layers { "1" "2" "3" "4" "5" "7" "8" "9" "10" "11" "12" "15" "16" "17" "18" "29" "30" "31" "32" "33" "34" "35" "36" "37" "96" "97" "99" "100" "101" "138" "139" "175" "176" "177" "178" "181" "182" "183" "245" "246" } -nblayers 40
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 4252 -face 4252 -shape 46792 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 4252 -face 4252 -freewire 0 -freeedge 0 -sharededge 17172 -max_solid 0 -max_shell 61 -max_face 4252 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.01863822385 -avg 2.362731616e-005 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
-
set filename CTS20315-2.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 322 ( 148 ) Summary = 322 ( 148 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 797 ( 797 ) Face = 797 ( 797 ) Summary = 11927 ( 11927 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 797 ( 797 ) Face = 797 ( 797 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 4820 ( 4820 )
-TOLERANCE : MaxTol = 0.03846819732 ( 0.0394709482 ) AvgTol = 0.0008687242138 ( 0.002865279517 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 148 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 797 -face 797 -shape 11927
+checkstatshape res_1 -solid 0 -shell 797 -face 797 -freewire 0 -freeedge 0 -sharededge 4820
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.0394709482 -avg 0.002865279517]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 148 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 322 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 797 -face 797 -shape 11927 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 797 -face 797 -freewire 0 -freeedge 0 -sharededge 4820 -max_solid 0 -max_shell 797 -max_face 797 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.03846819732 -avg 0.0008687242138 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: CHECKSHAPE : Faulty"
-
set filename trj8_pm6-hc-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 20 ) Warnings = 0 ( 0 ) Summary = 0 ( 20 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 11 ( 544 ) Summary = 11 ( 544 )
-CHECKSHAPE : Wires = 10 ( 0 ) Faces = 10 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 98 ( 98 ) Shell = 98 ( 98 ) Face = 1506 ( 1506 ) Summary = 9228 ( 9224 )
-STATSHAPE : Solid = 272 ( 272 ) Shell = 272 ( 272 ) Face = 3216 ( 3216 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 3297 ( 3293 )
-TOLERANCE : MaxTol = 0.9562231856 ( 3.3196868 ) AvgTol = 0.0007146007958 ( 0.003703900307 )
-LABELS : N0Labels = 230 ( 230 ) N1Labels = 1909 ( 1909 ) N2Labels = 0 ( 0 ) TotalLabels = 2139 ( 2139 ) NameLabels = 633 ( 633 ) ColorLabels = 1604 ( 1604 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 161 ( 161 ) Volume = 161 ( 161 ) Area = 161 ( 161 )
-NCOLORS : NColors = 6 ( 6 )
-COLORS : Colors = DARKSEAGREEN1 LAVENDER LIGHTGOLDENROD LIGHTSTEELBLUE1 LIGHTSTEELBLUE3 STEELBLUE3 ( DARKSEAGREEN1 LAVENDER LIGHTGOLDENROD LIGHTSTEELBLUE1 LIGHTSTEELBLUE3 STEELBLUE3 )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 60 -max_faults 20
+checkdoc "tpstat c" -max_warns 545 -max_faults 0
+checkxstat D_First -n0 230 -n1 1909 -n2 0 -total 2139 -withname 633 -withcolor 1604 -withlayer 0 -centroid 161 -volume 161 -area 161 -colors { DARKSEAGREEN1 LAVENDER LIGHTGOLDENROD LIGHTSTEELBLUE1 LIGHTSTEELBLUE3 STEELBLUE3 } -nbcolors 6 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 98 -shell 98 -face 1506 -shape 9224
+checkstatshape res_1 -solid 272 -shell 272 -face 3216 -freewire 0 -freeedge 0 -sharededge 3293
+set max_tol_res_1 [checkmaxtol res_1 -tol 3.3196868 -avg 0.003703900307]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 60 -max_faults 20
+checkdoc "tpstat c" -max_warns 545 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 13 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 230 -n1 1909 -n2 0 -total 2139 -withname 633 -withcolor 1604 -withlayer 0 -centroid 161 -volume 161 -area 161 -nbcolors 6 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 230 -n1 1909 -n2 0 -total 2139 -withname 633 -withcolor 1604 -withlayer 0 -centroid 161 -volume 161 -area 161 -colors { DARKSEAGREEN1 LAVENDER LIGHTGOLDENROD LIGHTSTEELBLUE1 LIGHTSTEELBLUE3 STEELBLUE3 } -nbcolors 6 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 10 -max_faces 10 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 98 -shell 98 -face 1506 -shape 9228 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 272 -shell 272 -face 3216 -freewire 0 -freeedge 0 -sharededge 3297 -max_solid 272 -max_shell 272 -max_face 3216 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.9562231856 -avg 0.0007146007958 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: NBSHAPES : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename bm4_ug_seal_a.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 4 ( 12 ) Summary = 4 ( 12 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 3 ( 3 ) Shell = 5 ( 5 ) Face = 33 ( 33 ) Summary = 179 ( 180 )
-STATSHAPE : Solid = 3 ( 3 ) Shell = 5 ( 5 ) Face = 33 ( 33 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 66 ( 66 )
-TOLERANCE : MaxTol = 0.006927894742 ( 0.00692789498 ) AvgTol = 0.0002918389799 ( 0.000292341891 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 3 ( 2 ) N2Labels = 0 ( 0 ) TotalLabels = 4 ( 3 ) NameLabels = 1 ( 1 ) ColorLabels = 3 ( 2 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = GREEN MEDIUMSEAGREEN ( GREEN MEDIUMSEAGREEN )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 12 -max_faults 0
+checkxstat D_First -n0 1 -n1 2 -n2 0 -total 3 -withname 1 -withcolor 2 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { GREEN MEDIUMSEAGREEN } -nbcolors 2 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 3 -shell 5 -face 33 -shape 180
+checkstatshape res_1 -solid 3 -shell 5 -face 33 -freewire 0 -freeedge 0 -sharededge 66
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.00692789498 -avg 0.000292341891]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 12 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 2 -n2 0 -total 3 -withname 1 -withcolor 2 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 2 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 3 -n2 0 -total 4 -withname 1 -withcolor 3 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { GREEN MEDIUMSEAGREEN } -nbcolors 2 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 3 -shell 5 -face 33 -shape 179 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 3 -shell 5 -face 33 -freewire 0 -freeedge 0 -sharededge 66 -max_solid 3 -max_shell 5 -max_face 33 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.006927894742 -avg 0.0002918389799 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename bm4_ug_seal_b.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 4 ( 12 ) Summary = 4 ( 12 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 3 ( 3 ) Shell = 5 ( 5 ) Face = 33 ( 33 ) Summary = 180 ( 180 )
-STATSHAPE : Solid = 3 ( 3 ) Shell = 5 ( 5 ) Face = 33 ( 33 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 67 ( 66 )
-TOLERANCE : MaxTol = 0.0005609682904 ( 0.0005609682907 ) AvgTol = 1.661428836e-005 ( 1.72402699e-005 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 3 ( 2 ) N2Labels = 0 ( 0 ) TotalLabels = 4 ( 3 ) NameLabels = 1 ( 1 ) ColorLabels = 3 ( 2 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = GREEN MEDIUMSEAGREEN ( GREEN MEDIUMSEAGREEN )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 12 -max_faults 0
+checkxstat D_First -n0 1 -n1 2 -n2 0 -total 3 -withname 1 -withcolor 2 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { GREEN MEDIUMSEAGREEN } -nbcolors 2 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 3 -shell 5 -face 33 -shape 180
+checkstatshape res_1 -solid 3 -shell 5 -face 33 -freewire 0 -freeedge 0 -sharededge 66
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.0005609682907 -avg 1.72402699e-005]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 12 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 2 -n2 0 -total 3 -withname 1 -withcolor 2 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 2 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 3 -n2 0 -total 4 -withname 1 -withcolor 3 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { GREEN MEDIUMSEAGREEN } -nbcolors 2 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 3 -shell 5 -face 33 -shape 180 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 3 -shell 5 -face 33 -freewire 0 -freeedge 0 -sharededge 67 -max_solid 3 -max_shell 5 -max_face 33 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.0005609682904 -avg 1.661428836e-005 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: STATSHAPE : Faulty"
-set LinuxDiff 4
-set LinuxFaulties {CHECKSHAPE TOLERANCE}
set filename PRO10109.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 47 ( 41 ) Summary = 47 ( 41 )
-CHECKSHAPE : Wires = 0 ( 1 ) Faces = 1 ( 2 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 209 ( 129 ) Face = 209 ( 209 ) Summary = 3032 ( 2883 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 209 ( 129 ) Face = 209 ( 209 ) FreeWire = 0 ( 1 ) FreeEdge = 67 ( 67 ) SharedEdge = 1152 ( 1150 )
-TOLERANCE : MaxTol = 0.3035246255 ( 0.3035246024 ) AvgTol = 0.001361092422 ( 0.003604130581 )
-LABELS : N0Labels = 3 ( 3 ) N1Labels = 2 ( 2 ) N2Labels = 0 ( 0 ) TotalLabels = 5 ( 5 ) NameLabels = 5 ( 5 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 41 -max_faults 0
+checkxstat D_First -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 1 -max_faces 2 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 129 -face 209 -shape 2883
+checkstatshape res_1 -solid 0 -shell 129 -face 209 -freewire 1 -freeedge 67 -sharededge 1150
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.3035246024 -avg 0.003604130581]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 41 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 41 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 1 -max_faces 2 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 1 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 209 -face 209 -shape 3032 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 209 -face 209 -freewire 0 -freeedge 67 -sharededge 1152 -max_solid 0 -max_shell 129 -max_face 209 -max_freewire 1 -max_freeedge 67
+checkmaxtol res_2 -tol 0.3035246255 -avg 0.001361092422 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
set filename trj7_pm5-hc-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 20 ) Warnings = 0 ( 0 ) Summary = 0 ( 20 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 19 ( 555 ) Summary = 19 ( 555 )
-CHECKSHAPE : Wires = 10 ( 0 ) Faces = 10 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 98 ( 98 ) Shell = 98 ( 98 ) Face = 1506 ( 1506 ) Summary = 9228 ( 9224 )
-STATSHAPE : Solid = 272 ( 272 ) Shell = 272 ( 272 ) Face = 3216 ( 3216 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 3297 ( 3293 )
-TOLERANCE : MaxTol = 0.9562231856 ( 3.3196868 ) AvgTol = 0.0007140087235 ( 0.003703307656 )
-LABELS : N0Labels = 230 ( 230 ) N1Labels = 403 ( 403 ) N2Labels = 0 ( 0 ) TotalLabels = 633 ( 633 ) NameLabels = 633 ( 633 ) ColorLabels = 98 ( 98 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 99 ( 99 ) Volume = 99 ( 99 ) Area = 99 ( 99 )
-NCOLORS : NColors = 6 ( 6 )
-COLORS : Colors = DARKSEAGREEN1 LAVENDER LIGHTGOLDENROD LIGHTSTEELBLUE1 LIGHTSTEELBLUE3 STEELBLUE3 ( DARKSEAGREEN1 LAVENDER LIGHTGOLDENROD LIGHTSTEELBLUE1 LIGHTSTEELBLUE3 STEELBLUE3 )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 60 -max_faults 20
+checkdoc "tpstat c" -max_warns 557 -max_faults 0
+checkxstat D_First -n0 230 -n1 403 -n2 0 -total 633 -withname 633 -withcolor 98 -withlayer 0 -centroid 99 -volume 99 -area 99 -colors { DARKSEAGREEN1 LAVENDER LIGHTGOLDENROD LIGHTSTEELBLUE1 LIGHTSTEELBLUE3 STEELBLUE3 } -nbcolors 6 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 98 -shell 98 -face 1506 -shape 9224
+checkstatshape res_1 -solid 272 -shell 272 -face 3216 -freewire 0 -freeedge 0 -sharededge 3293
+set max_tol_res_1 [checkmaxtol res_1 -tol 3.3196868 -avg 0.003703307656]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 60 -max_faults 20
+checkdoc "tpstat c" -max_warns 557 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 21 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 230 -n1 403 -n2 0 -total 633 -withname 633 -withcolor 98 -withlayer 0 -centroid 99 -volume 99 -area 99 -nbcolors 6 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 230 -n1 403 -n2 0 -total 633 -withname 633 -withcolor 98 -withlayer 0 -centroid 99 -volume 99 -area 99 -colors { DARKSEAGREEN1 LAVENDER LIGHTGOLDENROD LIGHTSTEELBLUE1 LIGHTSTEELBLUE3 STEELBLUE3 } -nbcolors 6 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 10 -max_faces 10 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 98 -shell 98 -face 1506 -shape 9228 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 272 -shell 272 -face 3216 -freewire 0 -freeedge 0 -sharededge 3297 -max_solid 272 -max_shell 272 -max_face 3216 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.9562231856 -avg 0.0007140087235 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: PROPS : Faulty"
-
set filename trj7_pm5-id-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 237 ( 237 ) Summary = 237 ( 237 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 16 ( 16 ) Shell = 16 ( 16 ) Face = 494 ( 494 ) Summary = 3402 ( 3355 )
-STATSHAPE : Solid = 26 ( 26 ) Shell = 26 ( 26 ) Face = 874 ( 874 ) FreeWire = 0 ( 0 ) FreeEdge = 58 ( 58 ) SharedEdge = 1179 ( 1179 )
-TOLERANCE : MaxTol = 0.001020031074 ( 0.00102003115 ) AvgTol = 6.808274139e-006 ( 6.808274478e-006 )
-LABELS : N0Labels = 27 ( 27 ) N1Labels = 257 ( 257 ) N2Labels = 0 ( 0 ) TotalLabels = 284 ( 284 ) NameLabels = 54 ( 54 ) ColorLabels = 242 ( 242 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 15 ( 32 ) Volume = 15 ( 15 ) Area = 15 ( 15 )
-NCOLORS : NColors = 6 ( 6 )
-COLORS : Colors = DEEPSKYBLUE2 DODGERBLUE2 MAGENTA1 ORANGE ORANGERED RED ( DEEPSKYBLUE2 DODGERBLUE2 MAGENTA1 ORANGE ORANGERED RED )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 237 -max_faults 0
+checkxstat D_First -n0 27 -n1 257 -n2 0 -total 284 -withname 54 -withcolor 242 -withlayer 0 -centroid 32 -volume 15 -area 15 -colors { DEEPSKYBLUE2 DODGERBLUE2 MAGENTA1 ORANGE ORANGERED RED } -nbcolors 6 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 16 -shell 16 -face 494 -shape 3355
+checkstatshape res_1 -solid 26 -shell 26 -face 874 -freewire 0 -freeedge 58 -sharededge 1179
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.00102003115 -avg 6.808274478e-006]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 237 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 237 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 27 -n1 257 -n2 0 -total 284 -withname 54 -withcolor 242 -withlayer 0 -centroid 32 -volume 15 -area 15 -nbcolors 6 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 27 -n1 257 -n2 0 -total 284 -withname 54 -withcolor 242 -withlayer 0 -centroid 15 -volume 15 -area 15 -colors { DEEPSKYBLUE2 DODGERBLUE2 MAGENTA1 ORANGE ORANGERED RED } -nbcolors 6 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 16 -shell 16 -face 494 -shape 3402 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 26 -shell 26 -face 874 -freewire 0 -freeedge 58 -sharededge 1179 -max_solid 26 -max_shell 26 -max_face 874 -max_freewire 0 -max_freeedge 58
+checkmaxtol res_2 -tol 0.001020031074 -avg 6.808274139e-006 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: PROPS : Faulty"
-
set filename trj7_pm5-pe-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 7 ( 2 ) Summary = 7 ( 2 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 4 ( 4 ) Shell = 4 ( 4 ) Face = 1067 ( 1067 ) Summary = 7192 ( 7192 )
-STATSHAPE : Solid = 6 ( 6 ) Shell = 6 ( 6 ) Face = 1083 ( 1083 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 3028 ( 3028 )
-TOLERANCE : MaxTol = 0.0008521598214 ( 0.001299198834 ) AvgTol = 1.420819957e-005 ( 0.0004704251775 )
-LABELS : N0Labels = 5 ( 5 ) N1Labels = 107 ( 107 ) N2Labels = 0 ( 0 ) TotalLabels = 112 ( 112 ) NameLabels = 11 ( 11 ) ColorLabels = 104 ( 104 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 5 ( 11 ) Volume = 5 ( 5 ) Area = 5 ( 5 )
-NCOLORS : NColors = 5 ( 5 )
-COLORS : Colors = AZURE4 GRAY10 GRAY50 RED YELLOW ( AZURE4 GRAY10 GRAY50 RED YELLOW )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+checkxstat D_First -n0 5 -n1 107 -n2 0 -total 112 -withname 11 -withcolor 104 -withlayer 0 -centroid 11 -volume 5 -area 5 -colors { AZURE4 GRAY10 GRAY50 RED YELLOW } -nbcolors 5 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 4 -shell 4 -face 1067 -shape 7192
+checkstatshape res_1 -solid 6 -shell 6 -face 1083 -freewire 0 -freeedge 0 -sharededge 3028
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.001299198834 -avg 0.0004704251775]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 5 -n1 107 -n2 0 -total 112 -withname 11 -withcolor 104 -withlayer 0 -centroid 11 -volume 5 -area 5 -nbcolors 5 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 5 -n1 107 -n2 0 -total 112 -withname 11 -withcolor 104 -withlayer 0 -centroid 5 -volume 5 -area 5 -colors { AZURE4 GRAY10 GRAY50 RED YELLOW } -nbcolors 5 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 4 -shell 4 -face 1067 -shape 7192 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 6 -shell 6 -face 1083 -freewire 0 -freeedge 0 -sharededge 3028 -max_solid 6 -max_shell 6 -max_face 1083 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.0008521598214 -avg 1.420819957e-005 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename trj12_b3-id-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 451 ( 435 ) Summary = 451 ( 435 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 691 ( 691 ) Summary = 4597 ( 4593 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 691 ( 691 ) FreeWire = 0 ( 0 ) FreeEdge = 4 ( 4 ) SharedEdge = 1921 ( 1921 )
-TOLERANCE : MaxTol = 0.009713246079 ( 0.009813593708 ) AvgTol = 0.0007698614465 ( 0.001110514786 )
-LABELS : N0Labels = 3 ( 3 ) N1Labels = 765 ( 761 ) N2Labels = 0 ( 0 ) TotalLabels = 768 ( 764 ) NameLabels = 5 ( 5 ) ColorLabels = 73 ( 70 ) LayerLabels = 691 ( 691 )
-PROPS : Centroid = 1 ( 1 ) Volume = 1 ( 1 ) Area = 1 ( 1 )
-NCOLORS : NColors = 3 ( 3 )
-COLORS : Colors = BLACK GREEN MEDIUMSEAGREEN ( BLACK GREEN MEDIUMSEAGREEN )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 31 ( 31 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 435 -max_faults 0
+checkxstat D_First -n0 3 -n1 761 -n2 0 -total 764 -withname 5 -withcolor 70 -withlayer 691 -centroid 1 -volume 1 -area 1 -colors { BLACK GREEN MEDIUMSEAGREEN } -nbcolors 3 -layers { 31 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 691 -shape 4593
+checkstatshape res_1 -solid 1 -shell 1 -face 691 -freewire 0 -freeedge 4 -sharededge 1921
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.009813593708 -avg 0.001110514786]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 435 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 451 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3 -n1 761 -n2 0 -total 764 -withname 5 -withcolor 70 -withlayer 691 -centroid 1 -volume 1 -area 1 -nbcolors 3 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 765 -n2 0 -total 768 -withname 5 -withcolor 73 -withlayer 691 -centroid 1 -volume 1 -area 1 -colors { BLACK GREEN MEDIUMSEAGREEN } -nbcolors 3 -layers { 31 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 691 -shape 4597 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 691 -freewire 0 -freeedge 4 -sharededge 1921 -max_solid 1 -max_shell 1 -max_face 691 -max_freewire 0 -max_freeedge 4
+checkmaxtol res_2 -tol 0.009713246079 -avg 0.0007698614465 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename trj12_ttmouse-ct-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 506 ( 256 ) Summary = 506 ( 256 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 31 ( 31 ) Shell = 349 ( 349 ) Face = 1547 ( 1547 ) Summary = 13546 ( 13344 )
-STATSHAPE : Solid = 40 ( 40 ) Shell = 359 ( 359 ) Face = 1923 ( 1923 ) FreeWire = 0 ( 3 ) FreeEdge = 208 ( 208 ) SharedEdge = 5414 ( 5414 )
-TOLERANCE : MaxTol = 0.01535715949 ( 0.01940049859 ) AvgTol = 0.000510121635 ( 0.001069993247 )
-LABELS : N0Labels = 13 ( 13 ) N1Labels = 2197 ( 2323 ) N2Labels = 0 ( 0 ) TotalLabels = 2210 ( 2336 ) NameLabels = 31 ( 31 ) ColorLabels = 2183 ( 2183 ) LayerLabels = 483 ( 609 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 7 ( 7 )
-COLORS : Colors = BLUE1 GREEN GREEN4 MAGENTA1 TURQUOISE3 WHITE YELLOW ( BLUE1 GREEN GREEN4 MAGENTA1 TURQUOISE3 WHITE YELLOW )
-NLAYERS : NLayers = 11 ( 11 )
-LAYERS : Layers = 0 1 10 2 3 4 5 6 7 8 9 ( 0 1 10 2 3 4 5 6 7 8 9 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 8 -max_faults 0
+checkdoc "tpstat c" -max_warns 274 -max_faults 0
+checkxstat D_First -n0 13 -n1 2323 -n2 0 -total 2336 -withname 31 -withcolor 2183 -withlayer 609 -centroid 0 -volume 0 -area 0 -colors { BLUE1 GREEN GREEN4 MAGENTA1 TURQUOISE3 WHITE YELLOW } -nbcolors 7 -layers { 0 1 10 2 3 4 5 6 7 8 9 } -nblayers 11
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 31 -shell 349 -face 1547 -shape 13344
+checkstatshape res_1 -solid 40 -shell 359 -face 1923 -freewire 3 -freeedge 208 -sharededge 5414
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.01940049859 -avg 0.001069993247]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 8 -max_faults 0
+checkdoc "tpstat c" -max_warns 274 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 395 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 13 -n1 2323 -n2 0 -total 2336 -withname 31 -withcolor 2183 -withlayer 609 -centroid 0 -volume 0 -area 0 -nbcolors 7 -nblayers 11
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 13 -n1 2197 -n2 0 -total 2210 -withname 31 -withcolor 2183 -withlayer 483 -centroid 0 -volume 0 -area 0 -colors { BLUE1 GREEN GREEN4 MAGENTA1 TURQUOISE3 WHITE YELLOW } -nbcolors 7 -layers { 0 1 10 2 3 4 5 6 7 8 9 } -nblayers 11
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 31 -shell 349 -face 1547 -shape 13546 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 40 -shell 359 -face 1923 -freewire 0 -freeedge 208 -sharededge 5414 -max_solid 40 -max_shell 359 -max_face 1923 -max_freewire 3 -max_freeedge 208
+checkmaxtol res_2 -tol 0.01535715949 -avg 0.000510121635 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
-
set filename 612319029MB-HEAD-CYLINDER.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 1869 ( 2152 ) Summary = 1869 ( 2152 )
-CHECKSHAPE : Wires = 36 ( 36 ) Faces = 36 ( 36 ) Shells = 0 ( 0 ) Solids = 1 ( 1 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 17 ( 17 ) Face = 6173 ( 6173 ) Summary = 41176 ( 41161 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 17 ( 17 ) Face = 6173 ( 6173 ) FreeWire = 0 ( 0 ) FreeEdge = 4 ( 4 ) SharedEdge = 17483 ( 17472 )
-TOLERANCE : MaxTol = 0.07753055119 ( 0.08114875624 ) AvgTol = 0.002252828596 ( 0.008808842178 )
-LABELS : N0Labels = 3 ( 3 ) N1Labels = 2 ( 2 ) N2Labels = 0 ( 0 ) TotalLabels = 5 ( 5 ) NameLabels = 5 ( 5 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2189 -max_faults 0
+checkxstat D_First -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 36 -max_faces 36 -max_shells 0 -max_solids 1
+checknbshapes res_1 -solid 1 -shell 17 -face 6173 -shape 41161
+checkstatshape res_1 -solid 1 -shell 17 -face 6173 -freewire 0 -freeedge 4 -sharededge 17472
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.08114875624 -avg 0.008808842178]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2189 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1660 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 36 -max_faces 36 -max_shells 0 -max_solids 1
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 36 -max_faces 36 -max_shells 0 -max_solids 1
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 17 -face 6173 -shape 41176 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 17 -face 6173 -freewire 0 -freeedge 4 -sharededge 17483 -max_solid 1 -max_shell 17 -max_face 6173 -max_freewire 0 -max_freeedge 4
+checkmaxtol res_2 -tol 0.07753055119 -avg 0.002252828596 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
puts "TODO CR23096 ALL: STATSHAPE : Faulty"
-
set filename tr9_r0601-td.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 228 ( 1 ) Summary = 228 ( 1 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 4242 ( 61 ) Face = 4242 ( 4242 ) Summary = 46642 ( 42462 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 4242 ( 61 ) Face = 4242 ( 4242 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 17100 ( 17100 )
-TOLERANCE : MaxTol = 0.0003292944598 ( 0.0009787303794 ) AvgTol = 3.190255905e-007 ( 8.698017989e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 4242 ( 4242 ) N2Labels = 0 ( 0 ) TotalLabels = 4243 ( 4243 ) NameLabels = 1 ( 1 ) ColorLabels = 4242 ( 4242 ) LayerLabels = 4242 ( 4242 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = RED WHITE ( RED WHITE )
-NLAYERS : NLayers = 39 ( 39 )
-LAYERS : Layers = 001 002 003 004 005 008 009 010 011 012 015 016 017 018 029 030 031 032 033 034 035 036 037 096 097 099 100 101 138 139 175 176 177 178 181 182 183 245 246 ( 001 002 003 004 005 008 009 010 011 012 015 016 017 018 029 030 031 032 033 034 035 036 037 096 097 099 100 101 138 139 175 176 177 178 181 182 183 245 246 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+checkxstat D_First -n0 1 -n1 4242 -n2 0 -total 4243 -withname 1 -withcolor 4242 -withlayer 4242 -centroid 0 -volume 0 -area 0 -colors { RED WHITE } -nbcolors 2 -layers { 001 002 003 004 005 008 009 010 011 012 015 016 017 018 029 030 031 032 033 034 035 036 037 096 097 099 100 101 138 139 175 176 177 178 181 182 183 245 246 } -nblayers 39
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 61 -face 4242 -shape 42462
+checkstatshape res_1 -solid 0 -shell 61 -face 4242 -freewire 0 -freeedge 0 -sharededge 17100
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.0009787303794 -avg 8.698017989e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 194 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 4242 -n2 0 -total 4243 -withname 1 -withcolor 4242 -withlayer 4242 -centroid 0 -volume 0 -area 0 -nbcolors 2 -nblayers 39
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 4242 -n2 0 -total 4243 -withname 1 -withcolor 4242 -withlayer 4242 -centroid 0 -volume 0 -area 0 -colors { RED WHITE } -nbcolors 2 -layers { 001 002 003 004 005 008 009 010 011 012 015 016 017 018 029 030 031 032 033 034 035 036 037 096 097 099 100 101 138 139 175 176 177 178 181 182 183 245 246 } -nblayers 39
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 4242 -face 4242 -shape 46642 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 4242 -face 4242 -freewire 0 -freeedge 0 -sharededge 17100 -max_solid 0 -max_shell 61 -max_face 4242 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.0003292944598 -avg 3.190255905e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: STATSHAPE : Faulty"
-
set filename PRO7072.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 163 ( 223 ) Summary = 163 ( 223 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 779 ( 770 ) Face = 800 ( 800 ) Summary = 9160 ( 9152 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 779 ( 770 ) Face = 800 ( 800 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 3403 ( 3404 )
-TOLERANCE : MaxTol = 0.1585551198 ( 0.1585551198 ) AvgTol = 0.0004822446021 ( 0.0004842914724 )
-LABELS : N0Labels = 3 ( 3 ) N1Labels = 2 ( 2 ) N2Labels = 0 ( 0 ) TotalLabels = 5 ( 5 ) NameLabels = 5 ( 5 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 222 -max_faults 0
+checkxstat D_First -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 770 -face 800 -shape 9152
+checkstatshape res_1 -solid 0 -shell 770 -face 800 -freewire 0 -freeedge 0 -sharededge 3404
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.1585551198 -avg 0.0004842914724]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 222 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 161 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 779 -face 800 -shape 9160 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 779 -face 800 -freewire 0 -freeedge 0 -sharededge 3403 -max_solid 0 -max_shell 770 -max_face 800 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.1585551198 -avg 0.0004822446021 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
-
set filename gehaeuse_solid.stp
-set ref_data {
-DATA : Faulties = 0 ( 2 ) Warnings = 0 ( 0 ) Summary = 0 ( 2 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 120 ( 77 ) Summary = 120 ( 77 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 12 ( 12 ) Shell = 28 ( 28 ) Face = 3042 ( 3042 ) Summary = 17827 ( 17827 )
-STATSHAPE : Solid = 42 ( 42 ) Shell = 58 ( 58 ) Face = 3464 ( 3464 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 7281 ( 7281 )
-TOLERANCE : MaxTol = 0.08182857582 ( 0.08182857582 ) AvgTol = 0.001536334725 ( 0.005273191285 )
-LABELS : N0Labels = 18 ( 18 ) N1Labels = 47 ( 47 ) N2Labels = 0 ( 0 ) TotalLabels = 65 ( 65 ) NameLabels = 65 ( 65 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 2
+checkdoc "tpstat c" -max_warns 78 -max_faults 0
+checkxstat D_First -n0 18 -n1 47 -n2 0 -total 65 -withname 65 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 12 -shell 28 -face 3042 -shape 17827
+checkstatshape res_1 -solid 42 -shell 58 -face 3464 -freewire 0 -freeedge 0 -sharededge 7281
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.08182857582 -avg 0.005273191285]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 2
+checkdoc "tpstat c" -max_warns 78 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 62 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 18 -n1 47 -n2 0 -total 65 -withname 65 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 18 -n1 47 -n2 0 -total 65 -withname 65 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 12 -shell 28 -face 3042 -shape 17827 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 42 -shell 58 -face 3464 -freewire 0 -freeedge 0 -sharededge 7281 -max_solid 42 -max_shell 58 -max_face 3464 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.08182857582 -avg 0.001536334725 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: STATSHAPE : Faulty"
-puts "TODO CR25013 ALL: Error : 1 differences with reference data found"
+puts "TODO CR25013 ALL: Error: Max tolerance of res_1"
-set LinuxDiff 2
set filename wgehaeuse_surface.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 167 ( 910 ) Summary = 167 ( 910 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 2823 ( 0 ) Face = 2823 ( 2823 ) Summary = 35042 ( 32218 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 3347 ( 0 ) Face = 3347 ( 3347 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 13234 ( 13233 )
-TOLERANCE : MaxTol = 0.07507769847 ( 0.07507769847 ) AvgTol = 0.0002646721739 ( 0.002834192939 )
-LABELS : N0Labels = 37 ( 37 ) N1Labels = 76 ( 76 ) N2Labels = 0 ( 0 ) TotalLabels = 113 ( 113 ) NameLabels = 113 ( 113 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 910 -max_faults 0
+checkxstat D_First -n0 37 -n1 76 -n2 0 -total 113 -withname 113 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 2823 -shape 32218
+checkstatshape res_1 -solid 0 -shell 0 -face 3347 -freewire 0 -freeedge 0 -sharededge 13233
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.07507769847 -avg 0.002834192939]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 910 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 70 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 37 -n1 76 -n2 0 -total 113 -withname 113 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 37 -n1 76 -n2 0 -total 113 -withname 113 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 2823 -face 2823 -shape 35042 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 3347 -face 3347 -freewire 0 -freeedge 0 -sharededge 13234 -max_solid 0 -max_shell 0 -max_face 3347 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.07507769847 -avg 0.0002646721739 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
-
set filename trj4_pm2-in-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 158 ( 150 ) Summary = 158 ( 150 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 17 ( 17 ) Shell = 17 ( 17 ) Face = 1556 ( 1556 ) Summary = 10319 ( 10319 )
-STATSHAPE : Solid = 35 ( 35 ) Shell = 35 ( 35 ) Face = 1828 ( 1828 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 4290 ( 4290 )
-TOLERANCE : MaxTol = 0.1193605745 ( 0.1225157466 ) AvgTol = 0.001496894526 ( 0.001550453364 )
-LABELS : N0Labels = 22 ( 22 ) N1Labels = 39 ( 39 ) N2Labels = 0 ( 0 ) TotalLabels = 61 ( 61 ) NameLabels = 61 ( 61 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 150 -max_faults 0
+checkxstat D_First -n0 22 -n1 39 -n2 0 -total 61 -withname 61 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 17 -shell 17 -face 1556 -shape 10319
+checkstatshape res_1 -solid 35 -shell 35 -face 1828 -freewire 0 -freeedge 0 -sharededge 4290
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.1225157466 -avg 0.001550453364]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 150 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 159 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 22 -n1 39 -n2 0 -total 61 -withname 61 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 22 -n1 39 -n2 0 -total 61 -withname 61 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 17 -shell 17 -face 1556 -shape 10319 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 35 -shell 35 -face 1828 -freewire 0 -freeedge 0 -sharededge 4290 -max_solid 35 -max_shell 35 -max_face 1828 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.1193605745 -avg 0.001496894526 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TOLERANCE : Faulty"
-
set filename trj4_pm2-pe-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 4 ( 4 ) Summary = 4 ( 4 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 31 ( 31 ) Face = 1756 ( 1756 ) Summary = 10785 ( 10781 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 31 ( 31 ) Face = 1756 ( 1756 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 4486 ( 4482 )
-TOLERANCE : MaxTol = 0.03512124284 ( 0.0303925904 ) AvgTol = 0.002074437616 ( 0.003864115961 )
-LABELS : N0Labels = 3 ( 3 ) N1Labels = 249 ( 249 ) N2Labels = 0 ( 0 ) TotalLabels = 252 ( 252 ) NameLabels = 5 ( 5 ) ColorLabels = 31 ( 31 ) LayerLabels = 217 ( 217 )
-PROPS : Centroid = 1 ( 1 ) Volume = 1 ( 1 ) Area = 2 ( 2 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = WHITE ( WHITE )
-NLAYERS : NLayers = 3 ( 3 )
-LAYERS : Layers = GESENK_NULL QUERSCHNITT_S SPIBI ( GESENK_NULL QUERSCHNITT_S SPIBI )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+checkxstat D_First -n0 3 -n1 249 -n2 0 -total 252 -withname 5 -withcolor 31 -withlayer 217 -centroid 1 -volume 1 -area 2 -colors { WHITE } -nbcolors 1 -layers { "GESENK_NULL" "QUERSCHNITT_S" "SPIBI" } -nblayers 3
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 31 -face 1756 -shape 10781
+checkstatshape res_1 -solid 1 -shell 31 -face 1756 -freewire 0 -freeedge 0 -sharededge 4482
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.0303925904 -avg 0.003864115961]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3 -n1 249 -n2 0 -total 252 -withname 5 -withcolor 31 -withlayer 217 -centroid 1 -volume 1 -area 2 -nbcolors 1 -nblayers 3
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 249 -n2 0 -total 252 -withname 5 -withcolor 31 -withlayer 217 -centroid 1 -volume 1 -area 2 -colors { WHITE } -nbcolors 1 -layers { "GESENK_NULL" "QUERSCHNITT_S" "SPIBI" } -nblayers 3
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 31 -face 1756 -shape 10785 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 31 -face 1756 -freewire 0 -freeedge 0 -sharededge 4486 -max_solid 1 -max_shell 31 -max_face 1756 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.03512124284 -avg 0.002074437616 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
puts "TODO CR23096 ALL: STATSHAPE : Faulty"
-
set filename tr10_r0501_db.stp
-set ref_data {
-DATA : Faulties = 0 ( 61 ) Warnings = 0 ( 0 ) Summary = 0 ( 61 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 170 ( 3 ) Summary = 170 ( 3 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 4252 ( 61 ) Face = 4252 ( 4252 ) Summary = 46793 ( 42467 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 4252 ( 61 ) Face = 4252 ( 4252 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 17171 ( 17171 )
-TOLERANCE : MaxTol = 0.01863822385 ( 0.02412563428 ) AvgTol = 2.362737276e-05 ( 0.0001293920562 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 4313 ( 4313 ) N2Labels = 0 ( 0 ) TotalLabels = 4314 ( 4314 ) NameLabels = 1 ( 1 ) ColorLabels = 4242 ( 4242 ) LayerLabels = 4252 ( 4252 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = RED WHITE ( RED WHITE )
-NLAYERS : NLayers = 40 ( 40 )
-LAYERS : Layers = 1 10 100 101 11 12 138 139 15 16 17 175 176 177 178 18 181 182 183 2 245 246 29 3 30 31 32 33 34 35 36 37 4 5 7 8 9 96 97 99 ( { 1} { 2} { 3} { 4} { 5} { 7} { 8} { 9} { 10} { 11} { 12} { 15} { 16} { 17} { 18} { 29} { 30} { 31} { 32} { 33} { 34} { 35} { 36} { 37} { 96} { 97} { 99} 100 101 138 139 175 176 177 178 181 182 183 245 246 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 61
+checkdoc "tpstat c" -max_warns 3 -max_faults 0
+checkxstat D_First -n0 1 -n1 4313 -n2 0 -total 4314 -withname 1 -withcolor 4242 -withlayer 4252 -centroid 0 -volume 0 -area 0 -colors { RED WHITE } -nbcolors 2 -layers { " 1" " 2" " 3" " 4" " 5" " 7" " 8" " 9" " 10" " 11" " 12" " 15" " 16" " 17" " 18" " 29" " 30" " 31" " 32" " 33" " 34" " 35" " 36" " 37" " 96" " 97" " 99" "100" "101" "138" "139" "175" "176" "177" "178" "181" "182" "183" "245" "246" } -nblayers 40
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 61 -face 4252 -shape 42467
+checkstatshape res_1 -solid 0 -shell 61 -face 4252 -freewire 0 -freeedge 0 -sharededge 17171
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.02412563428 -avg 0.0001293920562]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 61
+checkdoc "tpstat c" -max_warns 3 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 170 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 4313 -n2 0 -total 4314 -withname 1 -withcolor 4242 -withlayer 4252 -centroid 0 -volume 0 -area 0 -nbcolors 2 -nblayers 40
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 4313 -n2 0 -total 4314 -withname 1 -withcolor 4242 -withlayer 4252 -centroid 0 -volume 0 -area 0 -colors { RED WHITE } -nbcolors 2 -layers { "1" "2" "3" "4" "5" "7" "8" "9" "10" "11" "12" "15" "16" "17" "18" "29" "30" "31" "32" "33" "34" "35" "36" "37" "96" "97" "99" "100" "101" "138" "139" "175" "176" "177" "178" "181" "182" "183" "245" "246" } -nblayers 40
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 4252 -face 4252 -shape 46793 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 4252 -face 4252 -freewire 0 -freeedge 0 -sharededge 17171 -max_solid 0 -max_shell 61 -max_face 4252 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.01863822385 -avg 2.362737276e-05 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename UKI60591.stp
-set ref_data {
-DATA : Faulties = 0 ( 6 ) Warnings = 0 ( 0 ) Summary = 0 ( 6 )
-TPSTAT : Faulties = 0 ( 6 ) Warnings = 16 ( 35 ) Summary = 16 ( 41 )
-CHECKSHAPE : Wires = 1 ( 1 ) Faces = 1 ( 1 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 4 ( 4 ) Shell = 27 ( 27 ) Face = 183 ( 183 ) Summary = 1491 ( 1486 )
-STATSHAPE : Solid = 4 ( 4 ) Shell = 27 ( 27 ) Face = 183 ( 183 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 623 ( 622 )
-TOLERANCE : MaxTol = 0.2224706003 ( 0.2224706003 ) AvgTol = 0.004510221387 ( 0.004579916902 )
-LABELS : N0Labels = 28 ( 28 ) N1Labels = 32 ( 23 ) N2Labels = 0 ( 0 ) TotalLabels = 60 ( 51 ) NameLabels = 51 ( 51 ) ColorLabels = 27 ( 22 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = GRAY20 RED ( GRAY20 RED )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 6
+checkdoc "tpstat c" -max_warns 36 -max_faults 6
+checkxstat D_First -n0 28 -n1 23 -n2 0 -total 51 -withname 51 -withcolor 22 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { GRAY20 RED } -nbcolors 2 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 1 -max_faces 1 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 4 -shell 27 -face 183 -shape 1486
+checkstatshape res_1 -solid 4 -shell 27 -face 183 -freewire 0 -freeedge 0 -sharededge 622
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.2224706003 -avg 0.004579916902]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 6
+checkdoc "tpstat c" -max_warns 36 -max_faults 6
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 17 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 28 -n1 23 -n2 0 -total 51 -withname 51 -withcolor 22 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 2 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 28 -n1 32 -n2 0 -total 60 -withname 51 -withcolor 27 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { GRAY20 RED } -nbcolors 2 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 1 -max_faces 1 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 1 -max_faces 1 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 4 -shell 27 -face 183 -shape 1491 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 4 -shell 27 -face 183 -freewire 0 -freeedge 0 -sharededge 623 -max_solid 4 -max_shell 27 -max_face 183 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.2224706003 -avg 0.004510221387 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: CHECKSHAPE : Faulty"
puts "TODO CR23096 ALL: STATSHAPE : Faulty"
-
set filename trj3_pm1-ct-203.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 127 ( 100 ) Summary = 127 ( 100 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 1 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 45 ( 44 ) Face = 804 ( 804 ) Summary = 5323 ( 5318 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 45 ( 44 ) Face = 804 ( 804 ) FreeWire = 0 ( 6 ) FreeEdge = 6 ( 6 ) SharedEdge = 2213 ( 2208 )
-TOLERANCE : MaxTol = 0.06389681961 ( 0.09956703386 ) AvgTol = 0.001998735132 ( 0.009098714937 )
-LABELS : N0Labels = 5 ( 5 ) N1Labels = 4 ( 4 ) N2Labels = 0 ( 0 ) TotalLabels = 9 ( 9 ) NameLabels = 9 ( 9 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 99 -max_faults 0
+checkxstat D_First -n0 5 -n1 4 -n2 0 -total 9 -withname 9 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 44 -face 804 -shape 5318
+checkstatshape res_1 -solid 1 -shell 44 -face 804 -freewire 6 -freeedge 6 -sharededge 2208
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.09956703386 -avg 0.009098714937]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 99 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 33 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 5 -n1 4 -n2 0 -total 9 -withname 9 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 5 -n1 4 -n2 0 -total 9 -withname 9 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 1 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 45 -face 804 -shape 5323 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 45 -face 804 -freewire 0 -freeedge 6 -sharededge 2213 -max_solid 1 -max_shell 44 -max_face 804 -max_freewire 6 -max_freeedge 6
+checkmaxtol res_2 -tol 0.06389681961 -avg 0.001998735132 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: CHECKSHAPE : Faulty"
-
set filename trj3_pm1-ug-203.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 23 ( 499 ) Summary = 23 ( 499 )
-CHECKSHAPE : Wires = 1 ( 0 ) Faces = 2 ( 1 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 98 ( 98 ) Shell = 98 ( 98 ) Face = 3829 ( 3829 ) Summary = 22284 ( 22284 )
-STATSHAPE : Solid = 116 ( 116 ) Shell = 116 ( 116 ) Face = 4144 ( 4144 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 8834 ( 8834 )
-TOLERANCE : MaxTol = 0.00815099718 ( 0.06761346589 ) AvgTol = 3.973824812e-006 ( 3.72116487e-005 )
-LABELS : N0Labels = 14 ( 14 ) N1Labels = 25 ( 25 ) N2Labels = 0 ( 0 ) TotalLabels = 39 ( 39 ) NameLabels = 39 ( 39 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 501 -max_faults 0
+checkxstat D_First -n0 14 -n1 25 -n2 0 -total 39 -withname 39 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 1 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 98 -shell 98 -face 3829 -shape 22284
+checkstatshape res_1 -solid 116 -shell 116 -face 4144 -freewire 0 -freeedge 0 -sharededge 8834
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.06761346589 -avg 3.72116487e-005]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 501 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 24 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 14 -n1 25 -n2 0 -total 39 -withname 39 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 14 -n1 25 -n2 0 -total 39 -withname 39 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 1 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 1 -max_faces 2 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 98 -shell 98 -face 3829 -shape 22284 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 116 -shell 116 -face 4144 -freewire 0 -freeedge 0 -sharededge 8834 -max_solid 116 -max_shell 116 -max_face 4144 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.00815099718 -avg 3.973824812e-006 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
puts "TODO CR23096 ALL: STATSHAPE : Faulty"
-
set filename bm1_db_exhaust.stp
-set ref_data {
-DATA : Faulties = 0 ( 1 ) Warnings = 0 ( 1 ) Summary = 0 ( 2 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 9 ( 6 ) Summary = 9 ( 6 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 3 ( 3 ) Shell = 11 ( 3 ) Face = 48 ( 48 ) Summary = 891 ( 868 )
-STATSHAPE : Solid = 3 ( 3 ) Shell = 11 ( 3 ) Face = 48 ( 48 ) FreeWire = 0 ( 0 ) FreeEdge = 12 ( 12 ) SharedEdge = 391 ( 388 )
-TOLERANCE : MaxTol = 0.003918698947 ( 0.01715433608 ) AvgTol = 0.0003235734452 ( 0.00126844198 )
-LABELS : N0Labels = 3 ( 3 ) N1Labels = 2 ( 2 ) N2Labels = 0 ( 0 ) TotalLabels = 5 ( 5 ) NameLabels = 5 ( 5 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 1 -max_faults 1
+checkdoc "tpstat c" -max_warns 6 -max_faults 0
+checkxstat D_First -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 3 -shell 3 -face 48 -shape 868
+checkstatshape res_1 -solid 3 -shell 3 -face 48 -freewire 0 -freeedge 12 -sharededge 388
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.01715433608 -avg 0.00126844198]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 1 -max_faults 1
+checkdoc "tpstat c" -max_warns 6 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 9 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 3 -shell 11 -face 48 -shape 891 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 3 -shell 11 -face 48 -freewire 0 -freeedge 12 -sharededge 391 -max_solid 3 -max_shell 3 -max_face 48 -max_freewire 0 -max_freeedge 12
+checkmaxtol res_2 -tol 0.003918698947 -avg 0.0003235734452 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: STATSHAPE : Faulty"
-
set filename vorstufe_surface.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 125 ( 461 ) Summary = 125 ( 461 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 810 ( 0 ) Face = 810 ( 810 ) Summary = 10386 ( 9576 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 964 ( 0 ) Face = 964 ( 964 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 3971 ( 3971 )
-TOLERANCE : MaxTol = 0.009818924747 ( 0.04427038115 ) AvgTol = 0.00029913369 ( 0.002929666529 )
-LABELS : N0Labels = 9 ( 9 ) N1Labels = 22 ( 22 ) N2Labels = 0 ( 0 ) TotalLabels = 31 ( 31 ) NameLabels = 31 ( 31 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 461 -max_faults 0
+checkxstat D_First -n0 9 -n1 22 -n2 0 -total 31 -withname 31 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 810 -shape 9576
+checkstatshape res_1 -solid 0 -shell 0 -face 964 -freewire 0 -freeedge 0 -sharededge 3971
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.04427038115 -avg 0.002929666529]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 461 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 109 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 9 -n1 22 -n2 0 -total 31 -withname 31 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 9 -n1 22 -n2 0 -total 31 -withname 31 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 810 -face 810 -shape 10386 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 964 -face 964 -freewire 0 -freeedge 0 -sharededge 3971 -max_solid 0 -max_shell 0 -max_face 964 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.009818924747 -avg 0.00029913369 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TOLERANCE : Faulty"
-
set filename r0501_pe.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 48 ( 180 ) Summary = 48 ( 180 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 7 ( 7 ) Shell = 7 ( 7 ) Face = 2117 ( 2117 ) Summary = 12742 ( 12741 )
-STATSHAPE : Solid = 7 ( 7 ) Shell = 7 ( 7 ) Face = 2117 ( 2117 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 5273 ( 5272 )
-TOLERANCE : MaxTol = 0.2357145058 ( 0.2065786276 ) AvgTol = 0.009610117691 ( 0.0246139599 )
-LABELS : N0Labels = 9 ( 9 ) N1Labels = 1311 ( 1311 ) N2Labels = 0 ( 0 ) TotalLabels = 1320 ( 1320 ) NameLabels = 17 ( 17 ) ColorLabels = 1303 ( 1303 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 10 ( 10 )
-COLORS : Colors = AZURE4 CYAN1 GRAY10 GRAY10 GRAY26 GRAY33 GRAY74 ORANGERED RED YELLOW ( AZURE4 CYAN1 GRAY10 GRAY10 GRAY26 GRAY33 GRAY74 ORANGERED RED YELLOW )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 182 -max_faults 0
+checkxstat D_First -n0 9 -n1 1311 -n2 0 -total 1320 -withname 17 -withcolor 1303 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { AZURE4 CYAN1 GRAY10 GRAY10 GRAY26 GRAY33 GRAY74 ORANGERED RED YELLOW } -nbcolors 10 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 7 -shell 7 -face 2117 -shape 12741
+checkstatshape res_1 -solid 7 -shell 7 -face 2117 -freewire 0 -freeedge 0 -sharededge 5272
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.2065786276 -avg 0.0246139599]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 182 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 8 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 9 -n1 1311 -n2 0 -total 1320 -withname 17 -withcolor 1303 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 10 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 9 -n1 1311 -n2 0 -total 1320 -withname 17 -withcolor 1303 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { AZURE4 CYAN1 GRAY10 GRAY10 GRAY26 GRAY33 GRAY74 ORANGERED RED YELLOW } -nbcolors 10 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 7 -shell 7 -face 2117 -shape 12742 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 7 -shell 7 -face 2117 -freewire 0 -freeedge 0 -sharededge 5273 -max_solid 7 -max_shell 7 -max_face 2117 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.2357145058 -avg 0.009610117691 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
set filename r0601_sy.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 11 ( 0 ) Warnings = 78 ( 24 ) Summary = 89 ( 24 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 106 ( 106 ) Face = 106 ( 106 ) Summary = 1665 ( 1665 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 106 ( 106 ) Face = 106 ( 106 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 670 ( 670 )
-TOLERANCE : MaxTol = 0.02881427566 ( 0.03703290736 ) AvgTol = 0.002876539025 ( 0.004091781903 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 212 ( 212 ) N2Labels = 0 ( 0 ) TotalLabels = 213 ( 213 ) NameLabels = 1 ( 1 ) ColorLabels = 106 ( 106 ) LayerLabels = 106 ( 106 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 5 ( 5 )
-COLORS : Colors = GREEN RED ROYALBLUE STEELBLUE2 TURQUOISE ( GREEN RED ROYALBLUE STEELBLUE2 TURQUOISE )
-NLAYERS : NLayers = 8 ( 8 )
-LAYERS : Layers = 1 2 21 22 23 24 25 3 ( 1 2 21 22 23 24 25 3 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 20 -max_faults 0
+checkxstat D_First -n0 1 -n1 212 -n2 0 -total 213 -withname 1 -withcolor 106 -withlayer 106 -centroid 0 -volume 0 -area 0 -colors { GREEN RED ROYALBLUE STEELBLUE2 TURQUOISE } -nbcolors 5 -layers { 1 2 21 22 23 24 25 3 } -nblayers 8
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 106 -face 106 -shape 1665
+checkstatshape res_1 -solid 0 -shell 106 -face 106 -freewire 0 -freeedge 0 -sharededge 670
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.03703290736 -avg 0.004091781903]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 20 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 76 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 212 -n2 0 -total 213 -withname 1 -withcolor 106 -withlayer 106 -centroid 0 -volume 0 -area 0 -nbcolors 5 -nblayers 8
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 212 -n2 0 -total 213 -withname 1 -withcolor 106 -withlayer 106 -centroid 0 -volume 0 -area 0 -colors { GREEN RED ROYALBLUE STEELBLUE2 TURQUOISE } -nbcolors 5 -layers { 1 2 21 22 23 24 25 3 } -nblayers 8
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 106 -face 106 -shape 1665 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 106 -face 106 -freewire 0 -freeedge 0 -sharededge 670 -max_solid 0 -max_shell 106 -max_face 106 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.02881427566 -avg 0.002876539025 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
puts "TODO CR23096 ALL: STATSHAPE : Faulty"
-
set filename bm2_ct_t4-A.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 9 ( 7 ) Summary = 9 ( 7 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 17 ( 15 ) Face = 17 ( 17 ) Summary = 214 ( 207 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 17 ( 15 ) Face = 17 ( 17 ) FreeWire = 0 ( 0 ) FreeEdge = 5 ( 5 ) SharedEdge = 74 ( 74 )
-TOLERANCE : MaxTol = 0.0005650418556 ( 0.0005650418556 ) AvgTol = 2.41320432e-005 ( 2.413204307e-005 )
-LABELS : N0Labels = 3 ( 3 ) N1Labels = 2 ( 2 ) N2Labels = 0 ( 0 ) TotalLabels = 5 ( 5 ) NameLabels = 5 ( 5 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 7 -max_faults 0
+checkxstat D_First -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 15 -face 17 -shape 207
+checkstatshape res_1 -solid 0 -shell 15 -face 17 -freewire 0 -freeedge 5 -sharededge 74
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.0005650418556 -avg 2.413204307e-005]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 7 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 9 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 17 -face 17 -shape 214 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 17 -face 17 -freewire 0 -freeedge 5 -sharededge 74 -max_solid 0 -max_shell 15 -max_face 17 -max_freewire 0 -max_freeedge 5
+checkmaxtol res_2 -tol 0.0005650418556 -avg 2.41320432e-005 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
-set LinuxDiff 1
-set LinuxFaulties {CHECKSHAPE}
set filename r122-ai.stp
-set ref_data {
-DATA : Faulties = 0 ( 395 ) Warnings = 0 ( 0 ) Summary = 0 ( 395 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 2 ) Summary = 0 ( 2 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 149 ( 149 ) Face = 149 ( 149 ) Summary = 2144 ( 2144 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 149 ( 149 ) Face = 149 ( 149 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 846 ( 846 )
-TOLERANCE : MaxTol = 0.0009108451735 ( 0.0009108451735 ) AvgTol = 3.593153987e-005 ( 3.593209779e-005 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 1185 -max_faults 395
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 149 -face 149 -shape 2144
+checkstatshape res_1 -solid 0 -shell 149 -face 149 -freewire 0 -freeedge 0 -sharededge 846
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.0009108451735 -avg 3.593209779e-005]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 1185 -max_faults 395
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 149 -face 149 -shape 2144 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 149 -face 149 -freewire 0 -freeedge 0 -sharededge 846 -max_solid 0 -max_shell 149 -max_face 149 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.0009108451735 -avg 3.593153987e-005 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
puts "TODO CR23096 ALL: STATSHAPE : Faulty"
-
set filename bm2_db_t4-A.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 10 ( 6 ) Summary = 10 ( 6 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 17 ( 15 ) Face = 17 ( 17 ) Summary = 208 ( 169 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 17 ( 15 ) Face = 17 ( 17 ) FreeWire = 0 ( 0 ) FreeEdge = 5 ( 5 ) SharedEdge = 72 ( 71 )
-TOLERANCE : MaxTol = 0.001403080873 ( 0.004988239556 ) AvgTol = 0.0001282768841 ( 0.0006150874603 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 79 ( 79 ) N2Labels = 0 ( 0 ) TotalLabels = 80 ( 80 ) NameLabels = 1 ( 1 ) ColorLabels = 62 ( 62 ) LayerLabels = 79 ( 79 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = GREEN ( GREEN )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 0 ( { 0} )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 6 -max_faults 0
+checkxstat D_First -n0 1 -n1 79 -n2 0 -total 80 -withname 1 -withcolor 62 -withlayer 79 -centroid 0 -volume 0 -area 0 -colors { GREEN } -nbcolors 1 -layers { " 0" } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 15 -face 17 -shape 169
+checkstatshape res_1 -solid 0 -shell 15 -face 17 -freewire 0 -freeedge 5 -sharededge 71
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.004988239556 -avg 0.0006150874603]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 6 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 10 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 79 -n2 0 -total 80 -withname 1 -withcolor 62 -withlayer 79 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 79 -n2 0 -total 80 -withname 1 -withcolor 62 -withlayer 79 -centroid 0 -volume 0 -area 0 -colors { GREEN } -nbcolors 1 -layers { 0 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 17 -face 17 -shape 208 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 17 -face 17 -freewire 0 -freeedge 5 -sharededge 72 -max_solid 0 -max_shell 15 -max_face 17 -max_freewire 0 -max_freeedge 5
+checkmaxtol res_2 -tol 0.001403080873 -avg 0.0001282768841 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
puts "TODO CR23096 ALL: STATSHAPE : Faulty"
-
set filename bm2_db_t4-B.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 10 ( 6 ) Summary = 10 ( 6 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 17 ( 15 ) Face = 17 ( 17 ) Summary = 208 ( 169 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 17 ( 15 ) Face = 17 ( 17 ) FreeWire = 0 ( 0 ) FreeEdge = 5 ( 5 ) SharedEdge = 72 ( 71 )
-TOLERANCE : MaxTol = 0.001403080873 ( 0.004988239556 ) AvgTol = 0.0001282768841 ( 0.0006150874603 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 79 ( 79 ) N2Labels = 0 ( 0 ) TotalLabels = 80 ( 80 ) NameLabels = 1 ( 1 ) ColorLabels = 62 ( 62 ) LayerLabels = 79 ( 79 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = GREEN ( GREEN )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 0 ( { 0} )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 6 -max_faults 0
+checkxstat D_First -n0 1 -n1 79 -n2 0 -total 80 -withname 1 -withcolor 62 -withlayer 79 -centroid 0 -volume 0 -area 0 -colors { GREEN } -nbcolors 1 -layers { " 0" } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 15 -face 17 -shape 169
+checkstatshape res_1 -solid 0 -shell 15 -face 17 -freewire 0 -freeedge 5 -sharededge 71
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.004988239556 -avg 0.0006150874603]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 6 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 10 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 79 -n2 0 -total 80 -withname 1 -withcolor 62 -withlayer 79 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 79 -n2 0 -total 80 -withname 1 -withcolor 62 -withlayer 79 -centroid 0 -volume 0 -area 0 -colors { GREEN } -nbcolors 1 -layers { 0 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 17 -face 17 -shape 208 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 17 -face 17 -freewire 0 -freeedge 5 -sharededge 72 -max_solid 0 -max_shell 15 -max_face 17 -max_freewire 0 -max_freeedge 5
+checkmaxtol res_2 -tol 0.001403080873 -avg 0.0001282768841 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
puts "TODO CR23096 ALL: STATSHAPE : Faulty"
-
set filename bm2_db_t4-C.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 8 ( 6 ) Summary = 8 ( 6 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 17 ( 15 ) Face = 17 ( 17 ) Summary = 208 ( 169 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 17 ( 15 ) Face = 17 ( 17 ) FreeWire = 0 ( 0 ) FreeEdge = 5 ( 5 ) SharedEdge = 72 ( 71 )
-TOLERANCE : MaxTol = 0.001435442939 ( 0.004988239556 ) AvgTol = 0.0001654464982 ( 0.001105220326 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 79 ( 79 ) N2Labels = 0 ( 0 ) TotalLabels = 80 ( 80 ) NameLabels = 1 ( 1 ) ColorLabels = 62 ( 62 ) LayerLabels = 79 ( 79 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = GREEN ( GREEN )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 0 ( { 0} )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 6 -max_faults 0
+checkxstat D_First -n0 1 -n1 79 -n2 0 -total 80 -withname 1 -withcolor 62 -withlayer 79 -centroid 0 -volume 0 -area 0 -colors { GREEN } -nbcolors 1 -layers { " 0" } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 15 -face 17 -shape 169
+checkstatshape res_1 -solid 0 -shell 15 -face 17 -freewire 0 -freeedge 5 -sharededge 71
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.004988239556 -avg 0.001105220326]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 6 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 8 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 79 -n2 0 -total 80 -withname 1 -withcolor 62 -withlayer 79 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 79 -n2 0 -total 80 -withname 1 -withcolor 62 -withlayer 79 -centroid 0 -volume 0 -area 0 -colors { GREEN } -nbcolors 1 -layers { 0 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 17 -face 17 -shape 208 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 17 -face 17 -freewire 0 -freeedge 5 -sharededge 72 -max_solid 0 -max_shell 15 -max_face 17 -max_freewire 0 -max_freeedge 5
+checkmaxtol res_2 -tol 0.001435442939 -avg 0.0001654464982 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: PROPS : Faulty"
-
set filename trj6_pm4-ec-203.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 4 ( 20 ) Summary = 4 ( 20 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 13 ( 13 ) Shell = 13 ( 13 ) Face = 801 ( 801 ) Summary = 4580 ( 4580 )
-STATSHAPE : Solid = 32 ( 32 ) Shell = 32 ( 32 ) Face = 840 ( 840 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 1833 ( 1833 )
-TOLERANCE : MaxTol = 0.000994818338 ( 0.009298751842 ) AvgTol = 1.273917467e-005 ( 0.0002831776234 )
-LABELS : N0Labels = 21 ( 21 ) N1Labels = 39 ( 39 ) N2Labels = 0 ( 0 ) TotalLabels = 60 ( 60 ) NameLabels = 60 ( 60 ) ColorLabels = 13 ( 13 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 21 ( 60 ) Volume = 21 ( 21 ) Area = 21 ( 21 )
-NCOLORS : NColors = 7 ( 7 )
-COLORS : Colors = GRAY20 GRAY8 GREEN GREENYELLOW PURPLE STEELBLUE YELLOW ( GRAY20 GRAY8 GREEN GREENYELLOW PURPLE STEELBLUE YELLOW )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 22 -max_faults 0
+checkxstat D_First -n0 21 -n1 39 -n2 0 -total 60 -withname 60 -withcolor 13 -withlayer 0 -centroid 60 -volume 21 -area 21 -colors { GRAY20 GRAY8 GREEN GREENYELLOW PURPLE STEELBLUE YELLOW } -nbcolors 7 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 13 -shell 13 -face 801 -shape 4580
+checkstatshape res_1 -solid 32 -shell 32 -face 840 -freewire 0 -freeedge 0 -sharededge 1833
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.009298751842 -avg 0.0002831776234]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 22 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 21 -n1 39 -n2 0 -total 60 -withname 60 -withcolor 13 -withlayer 0 -centroid 60 -volume 21 -area 21 -nbcolors 7 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 21 -n1 39 -n2 0 -total 60 -withname 60 -withcolor 13 -withlayer 0 -centroid 21 -volume 21 -area 21 -colors { GRAY20 GRAY8 GREEN GREENYELLOW PURPLE STEELBLUE YELLOW } -nbcolors 7 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 13 -shell 13 -face 801 -shape 4580 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 32 -shell 32 -face 840 -freewire 0 -freeedge 0 -sharededge 1833 -max_solid 32 -max_shell 32 -max_face 840 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.000994818338 -avg 1.273917467e-005 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
-puts "TODO CR25013 Linux: Error : 1 differences with reference data found"
+puts "TODO CR25013 Linux: Error : is WRONG because number of SHAPE entities in shape"
set filename trj6_pm4-hc-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 20 ) Warnings = 0 ( 60 ) Summary = 0 ( 80 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 21 ( 557 ) Summary = 21 ( 557 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 98 ( 98 ) Shell = 98 ( 98 ) Face = 1506 ( 1506 ) Summary = 9262 ( 9257 )
-STATSHAPE : Solid = 272 ( 272 ) Shell = 272 ( 272 ) Face = 3216 ( 3216 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 3315 ( 3311 )
-TOLERANCE : MaxTol = 0.9562231856 ( 3.3196868 ) AvgTol = 0.0007127405962 ( 0.003722159881 )
-LABELS : N0Labels = 230 ( 230 ) N1Labels = 1909 ( 1909 ) N2Labels = 0 ( 0 ) TotalLabels = 2139 ( 2139 ) NameLabels = 633 ( 633 ) ColorLabels = 1506 ( 1506 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 98 ( 98 ) Volume = 98 ( 98 ) Area = 98 ( 98 )
-NCOLORS : NColors = 6 ( 6 )
-COLORS : Colors = DARKSEAGREEN1 LAVENDER LIGHTGOLDENROD LIGHTSTEELBLUE1 LIGHTSTEELBLUE3 STEELBLUE3 ( DARKSEAGREEN1 LAVENDER LIGHTGOLDENROD LIGHTSTEELBLUE1 LIGHTSTEELBLUE3 STEELBLUE3 )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 60 -max_faults 20
+checkdoc "tpstat c" -max_warns 557 -max_faults 0
+checkxstat D_First -n0 230 -n1 1909 -n2 0 -total 2139 -withname 633 -withcolor 1506 -withlayer 0 -centroid 98 -volume 98 -area 98 -colors { DARKSEAGREEN1 LAVENDER LIGHTGOLDENROD LIGHTSTEELBLUE1 LIGHTSTEELBLUE3 STEELBLUE3 } -nbcolors 6 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 98 -shell 98 -face 1506 -shape 9257
+checkstatshape res_1 -solid 272 -shell 272 -face 3216 -freewire 0 -freeedge 0 -sharededge 3311
+set max_tol_res_1 [checkmaxtol res_1 -tol 3.3196868 -avg 0.003722159881]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 60 -max_faults 20
+checkdoc "tpstat c" -max_warns 557 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 21 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 230 -n1 1909 -n2 0 -total 2139 -withname 633 -withcolor 1506 -withlayer 0 -centroid 98 -volume 98 -area 98 -nbcolors 6 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 230 -n1 1909 -n2 0 -total 2139 -withname 633 -withcolor 1506 -withlayer 0 -centroid 98 -volume 98 -area 98 -colors { DARKSEAGREEN1 LAVENDER LIGHTGOLDENROD LIGHTSTEELBLUE1 LIGHTSTEELBLUE3 STEELBLUE3 } -nbcolors 6 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 98 -shell 98 -face 1506 -shape 9262 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 272 -shell 272 -face 3216 -freewire 0 -freeedge 0 -sharededge 3315 -max_solid 272 -max_shell 272 -max_face 3216 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.9562231856 -avg 0.0007127405962 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: NBSHAPES : Faulty"
-set LinuxDiff 3
set filename 53921163S0.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 17 ( 27 ) Summary = 17 ( 27 )
-CHECKSHAPE : Wires = 10 ( 10 ) Faces = 10 ( 10 ) Shells = 0 ( 0 ) Solids = 1 ( 1 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 3 ( 3 ) Face = 556 ( 556 ) Summary = 3658 ( 3661 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 3 ( 3 ) Face = 556 ( 556 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 1523 ( 1526 )
-TOLERANCE : MaxTol = 60.79282309 ( 60.87483475 ) AvgTol = 1.272227708 ( 1.266017009 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 26 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 10 -max_faces 10 -max_shells 0 -max_solids 1
+checknbshapes res_1 -solid 1 -shell 3 -face 556 -shape 3661
+checkstatshape res_1 -solid 1 -shell 3 -face 556 -freewire 0 -freeedge 0 -sharededge 1526
+set max_tol_res_1 [checkmaxtol res_1 -tol 60.87483475 -avg 1.266017009]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 26 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 14 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 10 -max_faces 10 -max_shells 0 -max_solids 1
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 10 -max_faces 10 -max_shells 0 -max_solids 1
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 3 -face 556 -shape 3658 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 3 -face 556 -freewire 0 -freeedge 0 -sharededge 1523 -max_solid 1 -max_shell 3 -max_face 556 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 60.79282309 -avg 1.272227708 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
puts "TODO CR23096 ALL: STATSHAPE : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename PRO10364.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 44 ( 1 ) Summary = 44 ( 1 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 13 ( 13 ) Shell = 300 ( 298 ) Face = 482 ( 482 ) Summary = 5637 ( 5527 )
-STATSHAPE : Solid = 13 ( 13 ) Shell = 300 ( 298 ) Face = 482 ( 482 ) FreeWire = 0 ( 0 ) FreeEdge = 107 ( 107 ) SharedEdge = 2116 ( 2116 )
-TOLERANCE : MaxTol = 0.02930428273 ( 0.09893741783 ) AvgTol = 0.0003509175902 ( 0.003693447129 )
-LABELS : N0Labels = 7 ( 7 ) N1Labels = 504 ( 515 ) N2Labels = 0 ( 0 ) TotalLabels = 511 ( 522 ) NameLabels = 12 ( 12 ) ColorLabels = 498 ( 498 ) LayerLabels = 407 ( 418 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 5 ( 5 )
-COLORS : Colors = BLUE1 CYAN1 GREEN MAGENTA1 YELLOW ( BLUE1 CYAN1 GREEN MAGENTA1 YELLOW )
-NLAYERS : NLayers = 2 ( 2 )
-LAYERS : Layers = 0 2 ( 0 2 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 2 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+checkxstat D_First -n0 7 -n1 515 -n2 0 -total 522 -withname 12 -withcolor 498 -withlayer 418 -centroid 0 -volume 0 -area 0 -colors { BLUE1 CYAN1 GREEN MAGENTA1 YELLOW } -nbcolors 5 -layers { 0 2 } -nblayers 2
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 13 -shell 298 -face 482 -shape 5527
+checkstatshape res_1 -solid 13 -shell 298 -face 482 -freewire 0 -freeedge 107 -sharededge 2116
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.09893741783 -avg 0.003693447129]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 2 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 6 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 7 -n1 515 -n2 0 -total 522 -withname 12 -withcolor 498 -withlayer 418 -centroid 0 -volume 0 -area 0 -nbcolors 5 -nblayers 2
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 7 -n1 504 -n2 0 -total 511 -withname 12 -withcolor 498 -withlayer 407 -centroid 0 -volume 0 -area 0 -colors { BLUE1 CYAN1 GREEN MAGENTA1 YELLOW } -nbcolors 5 -layers { 0 2 } -nblayers 2
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 13 -shell 300 -face 482 -shape 5637 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 13 -shell 300 -face 482 -freewire 0 -freeedge 107 -sharededge 2116 -max_solid 13 -max_shell 298 -max_face 482 -max_freewire 0 -max_freeedge 107
+checkmaxtol res_2 -tol 0.02930428273 -avg 0.0003509175902 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: STATSHAPE : Faulty"
-set LinuxDiff 3
-set LinuxFaulties {TOLERANCE}
set filename ct_exhaust-A.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 24 ( 0 ) Summary = 24 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 3 ( 3 ) Shell = 5 ( 3 ) Face = 43 ( 43 ) Summary = 635 ( 631 )
-STATSHAPE : Solid = 3 ( 3 ) Shell = 5 ( 3 ) Face = 43 ( 43 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 284 ( 282 )
-TOLERANCE : MaxTol = 0.00199721673 ( 0.008663672498 ) AvgTol = 0.0001953469228 ( 0.001153460099 )
-LABELS : N0Labels = 3 ( 3 ) N1Labels = 7 ( 7 ) N2Labels = 0 ( 0 ) TotalLabels = 10 ( 10 ) NameLabels = 5 ( 5 ) ColorLabels = 3 ( 3 ) LayerLabels = 5 ( 5 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = WHITE ( WHITE )
-NLAYERS : NLayers = 2 ( 2 )
-LAYERS : Layers = 0 2 ( 0 2 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 3 -max_faults 0
+checkxstat D_First -n0 3 -n1 7 -n2 0 -total 10 -withname 5 -withcolor 3 -withlayer 5 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { 0 2 } -nblayers 2
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 3 -shell 3 -face 43 -shape 631
+checkstatshape res_1 -solid 3 -shell 3 -face 43 -freewire 0 -freeedge 0 -sharededge 282
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.008663672498 -avg 0.001153460099]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 3 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3 -n1 7 -n2 0 -total 10 -withname 5 -withcolor 3 -withlayer 5 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 2
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 7 -n2 0 -total 10 -withname 5 -withcolor 3 -withlayer 5 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { 0 2 } -nblayers 2
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 3 -shell 5 -face 43 -shape 635 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 3 -shell 5 -face 43 -freewire 0 -freeedge 0 -sharededge 284 -max_solid 3 -max_shell 3 -max_face 43 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.00199721673 -avg 0.0001953469228 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
puts "TODO CR23096 ALL: STATSHAPE : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename trj12_ttscale-ct-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 438 ( 219 ) Summary = 438 ( 219 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 3 ( 3 ) Shell = 312 ( 303 ) Face = 1000 ( 1000 ) Summary = 9962 ( 9702 )
-STATSHAPE : Solid = 4 ( 4 ) Shell = 313 ( 304 ) Face = 1231 ( 1231 ) FreeWire = 0 ( 3 ) FreeEdge = 251 ( 251 ) SharedEdge = 3918 ( 3918 )
-TOLERANCE : MaxTol = 0.01535715949 ( 0.01648925136 ) AvgTol = 0.0007749108723 ( 0.001520406253 )
-LABELS : N0Labels = 5 ( 5 ) N1Labels = 2126 ( 2252 ) N2Labels = 0 ( 0 ) TotalLabels = 2131 ( 2257 ) NameLabels = 10 ( 10 ) ColorLabels = 2113 ( 2113 ) LayerLabels = 498 ( 624 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 6 ( 6 )
-COLORS : Colors = BLUE1 GREEN GREEN4 TURQUOISE3 WHITE YELLOW ( BLUE1 GREEN GREEN4 TURQUOISE3 WHITE YELLOW )
-NLAYERS : NLayers = 6 ( 6 )
-LAYERS : Layers = 0 1 10 2 3 7 ( 0 1 10 2 3 7 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 2 -max_faults 0
+checkdoc "tpstat c" -max_warns 230 -max_faults 0
+checkxstat D_First -n0 5 -n1 2252 -n2 0 -total 2257 -withname 10 -withcolor 2113 -withlayer 624 -centroid 0 -volume 0 -area 0 -colors { BLUE1 GREEN GREEN4 TURQUOISE3 WHITE YELLOW } -nbcolors 6 -layers { 0 1 10 2 3 7 } -nblayers 6
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 3 -shell 303 -face 1000 -shape 9702
+checkstatshape res_1 -solid 4 -shell 304 -face 1231 -freewire 3 -freeedge 251 -sharededge 3918
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.01648925136 -avg 0.001520406253]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 2 -max_faults 0
+checkdoc "tpstat c" -max_warns 230 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 345 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 5 -n1 2252 -n2 0 -total 2257 -withname 10 -withcolor 2113 -withlayer 624 -centroid 0 -volume 0 -area 0 -nbcolors 6 -nblayers 6
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 5 -n1 2126 -n2 0 -total 2131 -withname 10 -withcolor 2113 -withlayer 498 -centroid 0 -volume 0 -area 0 -colors { BLUE1 GREEN GREEN4 TURQUOISE3 WHITE YELLOW } -nbcolors 6 -layers { 0 1 10 2 3 7 } -nblayers 6
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 3 -shell 312 -face 1000 -shape 9962 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 4 -shell 313 -face 1231 -freewire 0 -freeedge 251 -sharededge 3918 -max_solid 4 -max_shell 304 -max_face 1231 -max_freewire 3 -max_freeedge 251
+checkmaxtol res_2 -tol 0.01535715949 -avg 0.0007749108723 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: STATSHAPE : Faulty"
-
set filename gehaeuse_surface.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 222 ( 1131 ) Summary = 222 ( 1131 )
-CHECKSHAPE : Wires = 8 ( 8 ) Faces = 8 ( 8 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 3067 ( 0 ) Face = 3067 ( 3067 ) Summary = 38169 ( 35102 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 3550 ( 0 ) Face = 3550 ( 3550 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 14457 ( 14457 )
-TOLERANCE : MaxTol = 0.08182775785 ( 0.08182775785 ) AvgTol = 0.0002907732443 ( 0.002393164469 )
-LABELS : N0Labels = 17 ( 17 ) N1Labels = 46 ( 46 ) N2Labels = 0 ( 0 ) TotalLabels = 63 ( 63 ) NameLabels = 63 ( 63 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1131 -max_faults 0
+checkxstat D_First -n0 17 -n1 46 -n2 0 -total 63 -withname 63 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 8 -max_faces 8 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 0 -face 3067 -shape 35102
+checkstatshape res_1 -solid 0 -shell 0 -face 3550 -freewire 0 -freeedge 0 -sharededge 14457
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.08182775785 -avg 0.002393164469]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1131 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 108 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 17 -n1 46 -n2 0 -total 63 -withname 63 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 17 -n1 46 -n2 0 -total 63 -withname 63 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 8 -max_faces 8 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 8 -max_faces 8 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 3067 -face 3067 -shape 38169 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 3550 -face 3550 -freewire 0 -freeedge 0 -sharededge 14457 -max_solid 0 -max_shell 0 -max_face 3550 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.08182775785 -avg 0.0002907732443 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename trj9_ap209-mp.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 26 ( 7 ) Summary = 26 ( 7 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 8 ( 4 ) Shell = 8 ( 4 ) Face = 48 ( 24 ) Summary = 277 ( 141 )
-STATSHAPE : Solid = 24 ( 24 ) Shell = 24 ( 24 ) Face = 144 ( 144 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 96 ( 48 )
-TOLERANCE : MaxTol = 0.0009551590893 ( 0.0009551590893 ) AvgTol = 0.0002351494334 ( 0.0002351494334 )
-LABELS : N0Labels = 4 ( 4 ) N1Labels = 6 ( 6 ) N2Labels = 0 ( 0 ) TotalLabels = 10 ( 10 ) NameLabels = 10 ( 9 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 7 -max_faults 0
+checkxstat D_First -n0 4 -n1 6 -n2 0 -total 10 -withname 9 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 4 -shell 4 -face 24 -shape 141
+checkstatshape res_1 -solid 24 -shell 24 -face 144 -freewire 0 -freeedge 0 -sharededge 48
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.0009551590893 -avg 0.0002351494334]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 7 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 26 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 4 -n1 6 -n2 0 -total 10 -withname 9 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 4 -n1 6 -n2 0 -total 10 -withname 10 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 8 -shell 8 -face 48 -shape 277 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 24 -shell 24 -face 144 -freewire 0 -freeedge 0 -sharededge 96 -max_solid 24 -max_shell 24 -max_face 144 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.0009551590893 -avg 0.0002351494334 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
puts "TODO CR23096 ALL: CHECKSHAPE : Faulty"
puts "TODO CR23096 ALL: STATSHAPE : Faulty"
set filename Z8M6SAT.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 3 ( 0 ) Warnings = 944 ( 3168 ) Summary = 947 ( 3168 )
-CHECKSHAPE : Wires = 50 ( 41 ) Faces = 50 ( 48 ) Shells = 0 ( 2 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 28 ( 28 ) Shell = 768 ( 30 ) Face = 3240 ( 3239 ) Summary = 29374 ( 28630 )
-STATSHAPE : Solid = 28 ( 28 ) Shell = 768 ( 30 ) Face = 3240 ( 3239 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 12587 ( 12579 )
-TOLERANCE : MaxTol = 15.00300076 ( 20.46526799 ) AvgTol = 0.02248945623 ( 0.03724082116 )
-LABELS : N0Labels = 3 ( 3 ) N1Labels = 2 ( 2 ) N2Labels = 0 ( 0 ) TotalLabels = 5 ( 5 ) NameLabels = 5 ( 5 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 3168 -max_faults 0
+checkxstat D_First -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 41 -max_faces 48 -max_shells 2 -max_solids 0
+checknbshapes res_1 -solid 28 -shell 30 -face 3239 -shape 28630
+checkstatshape res_1 -solid 28 -shell 30 -face 3239 -freewire 0 -freeedge 0 -sharededge 12579
+set max_tol_res_1 [checkmaxtol res_1 -tol 20.46526799 -avg 0.03724082116]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 3168 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 944 -max_faults 3
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 41 -max_faces 48 -max_shells 2 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 50 -max_faces 50 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 28 -shell 768 -face 3240 -shape 29374 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 28 -shell 768 -face 3240 -freewire 0 -freeedge 0 -sharededge 12587 -max_solid 28 -max_shell 30 -max_face 3239 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 15.00300076 -avg 0.02248945623 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
puts "TODO CR23096 ALL: STATSHAPE : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename r0301_db.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 1188 ( 892 ) Summary = 1188 ( 892 )
-CHECKSHAPE : Wires = 2 ( 2 ) Faces = 2 ( 2 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 94 ( 94 ) Shell = 288 ( 270 ) Face = 3469 ( 3469 ) Summary = 30724 ( 27788 )
-STATSHAPE : Solid = 94 ( 94 ) Shell = 288 ( 270 ) Face = 3469 ( 3469 ) FreeWire = 0 ( 102 ) FreeEdge = 2219 ( 2219 ) SharedEdge = 11315 ( 11109 )
-TOLERANCE : MaxTol = 0.6657106829 ( 0.6657106829 ) AvgTol = 0.00118387315 ( 0.004767889079 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 1838 ( 1839 ) N2Labels = 0 ( 0 ) TotalLabels = 1839 ( 1840 ) NameLabels = 1 ( 1 ) ColorLabels = 164 ( 164 ) LayerLabels = 1761 ( 1762 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 9 ( 9 )
-COLORS : Colors = CYAN1 DARKORANGE1 DODGERBLUE2 GREEN MAGENTA1 MAGENTA4 RED WHITE YELLOW ( CYAN1 DARKORANGE1 DODGERBLUE2 GREEN MAGENTA1 MAGENTA4 RED WHITE YELLOW )
-NLAYERS : NLayers = 19 ( 19 )
-LAYERS : Layers = 0 10 101 103 104 105 122 15 16 17 171 18 20 21 25 27 51 71 72 ( { 0} { 10} { 15} { 16} { 17} { 18} { 20} { 21} { 25} { 27} { 51} { 71} { 72} 101 103 104 105 122 171 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 891 -max_faults 0
+checkxstat D_First -n0 1 -n1 1839 -n2 0 -total 1840 -withname 1 -withcolor 164 -withlayer 1762 -centroid 0 -volume 0 -area 0 -colors { CYAN1 DARKORANGE1 DODGERBLUE2 GREEN MAGENTA1 MAGENTA4 RED WHITE YELLOW } -nbcolors 9 -layers { " 0" " 10" " 15" " 16" " 17" " 18" " 20" " 21" " 25" " 27" " 51" " 71" " 72" "101" "103" "104" "105" "122" "171" } -nblayers 19
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 2 -max_faces 2 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 94 -shell 270 -face 3469 -shape 27788
+checkstatshape res_1 -solid 94 -shell 270 -face 3469 -freewire 102 -freeedge 2219 -sharededge 11109
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.6657106829 -avg 0.004767889079]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 891 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1190 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 1839 -n2 0 -total 1840 -withname 1 -withcolor 164 -withlayer 1762 -centroid 0 -volume 0 -area 0 -nbcolors 9 -nblayers 19
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 1838 -n2 0 -total 1839 -withname 1 -withcolor 164 -withlayer 1761 -centroid 0 -volume 0 -area 0 -colors { CYAN1 DARKORANGE1 DODGERBLUE2 GREEN MAGENTA1 MAGENTA4 RED WHITE YELLOW } -nbcolors 9 -layers { "0" "10" "15" "16" "17" "18" "20" "21" "25" "27" "51" "71" "72" "101" "103" "104" "105" "122" "171" } -nblayers 19
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 2 -max_faces 2 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 2 -max_faces 2 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 94 -shell 288 -face 3469 -shape 30724 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 94 -shell 288 -face 3469 -freewire 0 -freeedge 2219 -sharededge 11315 -max_solid 94 -max_shell 270 -max_face 3469 -max_freewire 102 -max_freeedge 2219
+checkmaxtol res_2 -tol 0.6657106829 -avg 0.00118387315 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
puts "TODO CR23096 ALL: STATSHAPE : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename r0301soe_db.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 1207 ( 1000 ) Summary = 1207 ( 1000 )
-CHECKSHAPE : Wires = 2 ( 2 ) Faces = 2 ( 2 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 95 ( 95 ) Shell = 289 ( 271 ) Face = 3569 ( 3569 ) Summary = 31394 ( 28458 )
-STATSHAPE : Solid = 95 ( 95 ) Shell = 289 ( 271 ) Face = 3569 ( 3569 ) FreeWire = 0 ( 102 ) FreeEdge = 2219 ( 2219 ) SharedEdge = 11600 ( 11394 )
-TOLERANCE : MaxTol = 0.6657106806 ( 0.6657106806 ) AvgTol = 0.001017158361 ( 0.003936202705 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 1839 ( 1840 ) N2Labels = 0 ( 0 ) TotalLabels = 1840 ( 1841 ) NameLabels = 1 ( 1 ) ColorLabels = 165 ( 165 ) LayerLabels = 1762 ( 1763 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 9 ( 9 )
-COLORS : Colors = CYAN1 DARKORANGE1 DODGERBLUE2 GREEN MAGENTA1 MAGENTA4 RED WHITE YELLOW ( CYAN1 DARKORANGE1 DODGERBLUE2 GREEN MAGENTA1 MAGENTA4 RED WHITE YELLOW )
-NLAYERS : NLayers = 19 ( 19 )
-LAYERS : Layers = 0 10 101 103 104 105 122 15 16 17 171 18 20 21 25 27 51 71 72 ( { 0} { 10} { 15} { 16} { 17} { 18} { 20} { 21} { 25} { 27} { 51} { 71} { 72} 101 103 104 105 122 171 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1019 -max_faults 0
+checkxstat D_First -n0 1 -n1 1840 -n2 0 -total 1841 -withname 1 -withcolor 165 -withlayer 1763 -centroid 0 -volume 0 -area 0 -colors { CYAN1 DARKORANGE1 DODGERBLUE2 GREEN MAGENTA1 MAGENTA4 RED WHITE YELLOW } -nbcolors 9 -layers { " 0" " 10" " 15" " 16" " 17" " 18" " 20" " 21" " 25" " 27" " 51" " 71" " 72" "101" "103" "104" "105" "122" "171" } -nblayers 19
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 2 -max_faces 2 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 95 -shell 271 -face 3569 -shape 28458
+checkstatshape res_1 -solid 95 -shell 271 -face 3569 -freewire 102 -freeedge 2219 -sharededge 11394
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.6657106806 -avg 0.003936202705]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1019 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1093 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 1840 -n2 0 -total 1841 -withname 1 -withcolor 165 -withlayer 1763 -centroid 0 -volume 0 -area 0 -nbcolors 9 -nblayers 19
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 1839 -n2 0 -total 1840 -withname 1 -withcolor 165 -withlayer 1762 -centroid 0 -volume 0 -area 0 -colors { CYAN1 DARKORANGE1 DODGERBLUE2 GREEN MAGENTA1 MAGENTA4 RED WHITE YELLOW } -nbcolors 9 -layers { "0" "10" "15" "16" "17" "18" "20" "21" "25" "27" "51" "71" "72" "101" "103" "104" "105" "122" "171" } -nblayers 19
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 2 -max_faces 2 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 2 -max_faces 2 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 95 -shell 289 -face 3569 -shape 31394 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 95 -shell 289 -face 3569 -freewire 0 -freeedge 2219 -sharededge 11600 -max_solid 95 -max_shell 271 -max_face 3569 -max_freewire 102 -max_freeedge 2219
+checkmaxtol res_2 -tol 0.6657106806 -avg 0.001017158361 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: STATSHAPE : Faulty"
-set LinuxDiff 3
-set LinuxFaulties {TOLERANCE}
set filename bm2_ct_exhaust-A.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 24 ( 0 ) Summary = 24 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 3 ( 3 ) Shell = 5 ( 3 ) Face = 43 ( 43 ) Summary = 635 ( 631 )
-STATSHAPE : Solid = 3 ( 3 ) Shell = 5 ( 3 ) Face = 43 ( 43 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 284 ( 282 )
-TOLERANCE : MaxTol = 0.00199721673 ( 0.008663672498 ) AvgTol = 0.0001953469228 ( 0.001153460099 )
-LABELS : N0Labels = 3 ( 3 ) N1Labels = 2 ( 2 ) N2Labels = 0 ( 0 ) TotalLabels = 5 ( 5 ) NameLabels = 5 ( 5 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 3 -max_faults 0
+checkxstat D_First -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 3 -shell 3 -face 43 -shape 631
+checkstatshape res_1 -solid 3 -shell 3 -face 43 -freewire 0 -freeedge 0 -sharededge 282
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.008663672498 -avg 0.001153460099]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 3 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 3 -shell 5 -face 43 -shape 635 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 3 -shell 5 -face 43 -freewire 0 -freeedge 0 -sharededge 284 -max_solid 3 -max_shell 3 -max_face 43 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.00199721673 -avg 0.0001953469228 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
puts "TODO CR23096 ALL: STATSHAPE : Faulty"
puts "TODO CR23096 ALL: TOLERANCE : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename tr9_r0601-ct.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 125 ( 22 ) Summary = 125 ( 22 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 4252 ( 61 ) Face = 4252 ( 4252 ) Summary = 58212 ( 51172 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 4252 ( 61 ) Face = 4252 ( 4252 ) FreeWire = 0 ( 1 ) FreeEdge = 2854 ( 2854 ) SharedEdge = 20022 ( 20024 )
-TOLERANCE : MaxTol = 0.8498047902 ( 0.01572488678 ) AvgTol = 5.25293974e-005 ( 2.100507096e-005 )
-LABELS : N0Labels = 3 ( 3 ) N1Labels = 7107 ( 7169 ) N2Labels = 0 ( 0 ) TotalLabels = 7110 ( 7172 ) NameLabels = 5 ( 5 ) ColorLabels = 7105 ( 7105 ) LayerLabels = 7105 ( 7167 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 3 ( 3 )
-COLORS : Colors = RED WHITE YELLOW ( RED WHITE YELLOW )
-NLAYERS : NLayers = 46 ( 46 )
-LAYERS : Layers = 0 1 10 100 101 102 11 12 138 139 15 16 17 175 176 177 178 18 181 182 183 2 200 243 244 245 246 29 3 30 31 32 33 34 35 36 37 4 5 52 7 8 9 96 97 99 ( 0 1 10 100 101 102 11 12 138 139 15 16 17 175 176 177 178 18 181 182 183 2 200 243 244 245 246 29 3 30 31 32 33 34 35 36 37 4 5 52 7 8 9 96 97 99 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 21 -max_faults 0
+checkxstat D_First -n0 3 -n1 7169 -n2 0 -total 7172 -withname 5 -withcolor 7105 -withlayer 7167 -centroid 0 -volume 0 -area 0 -colors { RED WHITE YELLOW } -nbcolors 3 -layers { 0 1 10 100 101 102 11 12 138 139 15 16 17 175 176 177 178 18 181 182 183 2 200 243 244 245 246 29 3 30 31 32 33 34 35 36 37 4 5 52 7 8 9 96 97 99 } -nblayers 46
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 61 -face 4252 -shape 51172
+checkstatshape res_1 -solid 0 -shell 61 -face 4252 -freewire 1 -freeedge 2854 -sharededge 20024
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.01572488678 -avg 2.100507096e-005]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 21 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 126 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3 -n1 7169 -n2 0 -total 7172 -withname 5 -withcolor 7105 -withlayer 7167 -centroid 0 -volume 0 -area 0 -nbcolors 3 -nblayers 46
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 7107 -n2 0 -total 7110 -withname 5 -withcolor 7105 -withlayer 7105 -centroid 0 -volume 0 -area 0 -colors { RED WHITE YELLOW } -nbcolors 3 -layers { 0 1 10 100 101 102 11 12 138 139 15 16 17 175 176 177 178 18 181 182 183 2 200 243 244 245 246 29 3 30 31 32 33 34 35 36 37 4 5 52 7 8 9 96 97 99 } -nblayers 46
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 4252 -face 4252 -shape 58212 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 4252 -face 4252 -freewire 0 -freeedge 2854 -sharededge 20022 -max_solid 0 -max_shell 61 -max_face 4252 -max_freewire 1 -max_freeedge 2854
+checkmaxtol res_2 -tol 0.8498047902 -avg 5.25293974e-005 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
set filename PRO10368.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 204 ( 165 ) Summary = 204 ( 165 )
-CHECKSHAPE : Wires = 1 ( 0 ) Faces = 1 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 3 ( 3 ) Face = 773 ( 773 ) Summary = 4594 ( 4557 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 3 ( 3 ) Face = 773 ( 773 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 1943 ( 1943 )
-TOLERANCE : MaxTol = 0.06070038815 ( 0.0607003883 ) AvgTol = 0.002533300901 ( 0.003394184033 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 3 ( 3 ) N2Labels = 0 ( 0 ) TotalLabels = 4 ( 4 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 3 ( 3 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 0 ( { 0} )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 164 -max_faults 0
+checkxstat D_First -n0 1 -n1 3 -n2 0 -total 4 -withname 1 -withcolor 0 -withlayer 3 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { " 0" } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 3 -face 773 -shape 4557
+checkstatshape res_1 -solid 0 -shell 3 -face 773 -freewire 0 -freeedge 0 -sharededge 1943
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.0607003883 -avg 0.003394184033]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 164 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 127 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 3 -n2 0 -total 4 -withname 1 -withcolor 0 -withlayer 3 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 3 -n2 0 -total 4 -withname 1 -withcolor 0 -withlayer 3 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { 0 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 1 -max_faces 1 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 3 -face 773 -shape 4594 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 3 -face 773 -freewire 0 -freeedge 0 -sharededge 1943 -max_solid 0 -max_shell 3 -max_face 773 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.06070038815 -avg 0.002533300901 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: NBSHAPES : Faulty"
-puts "TODO CR23096 Linux: Error : 2 differences with reference data found :"
+puts "TODO CR23096 Linux: Error : is WRONG because number of SHAPE entities in shape"
+puts "TODO CR23096 Linux: STATSHAPE : Faulty ref number of shared edges in command statshape"
-set LinuxDiff 2
set filename trj12_b3-sy-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 283 ( 203 ) Summary = 283 ( 203 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 862 ( 862 ) Summary = 5603 ( 5611 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 862 ( 862 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 2367 ( 2375 )
-TOLERANCE : MaxTol = 0.2981250817 ( 0.1424276318 ) AvgTol = 0.001247316194 ( 0.000646415041 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = WHITE ( WHITE )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 203 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 862 -shape 5611
+checkstatshape res_1 -solid 1 -shell 1 -face 862 -freewire 0 -freeedge 0 -sharededge 2375
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.1424276318 -avg 0.000646415041]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 203 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 57 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 862 -shape 5603 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 862 -freewire 0 -freeedge 0 -sharededge 2367 -max_solid 1 -max_shell 1 -max_face 862 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.2981250817 -avg 0.001247316194 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
-
set filename trj3_pm1-id-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 1168 ( 895 ) Summary = 1168 ( 895 )
-CHECKSHAPE : Wires = 1 ( 1 ) Faces = 1 ( 1 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 3826 ( 3826 ) Summary = 23862 ( 23856 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 3826 ( 3826 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 9969 ( 9964 )
-TOLERANCE : MaxTol = 0.009023403931 ( 0.009980833943 ) AvgTol = 0.0003371911058 ( 0.000825361244 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 3047 ( 3047 ) N2Labels = 0 ( 0 ) TotalLabels = 3048 ( 3048 ) NameLabels = 1 ( 1 ) ColorLabels = 3048 ( 3048 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = BLUE1 YELLOW ( BLUE1 YELLOW )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 893 -max_faults 0
+checkxstat D_First -n0 1 -n1 3047 -n2 0 -total 3048 -withname 1 -withcolor 3048 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 YELLOW } -nbcolors 2 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 1 -max_faces 1 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 3826 -shape 23856
+checkstatshape res_1 -solid 1 -shell 1 -face 3826 -freewire 0 -freeedge 0 -sharededge 9964
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.009980833943 -avg 0.000825361244]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 893 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 924 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 3047 -n2 0 -total 3048 -withname 1 -withcolor 3048 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 2 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 3047 -n2 0 -total 3048 -withname 1 -withcolor 3048 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 YELLOW } -nbcolors 2 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 1 -max_faces 1 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 1 -max_faces 1 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 3826 -shape 23862 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 3826 -freewire 0 -freeedge 0 -sharededge 9969 -max_solid 1 -max_shell 1 -max_face 3826 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.009023403931 -avg 0.0003371911058 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: STATSHAPE : Faulty"
puts "TODO CR23096 ALL: LABELS : Faulty"
-
set filename trj4_pm2-id-203.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 54 ( 43 ) Summary = 54 ( 43 )
-CHECKSHAPE : Wires = 0 ( 2 ) Faces = 0 ( 2 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 8 ( 8 ) Shell = 230 ( 230 ) Face = 734 ( 730 ) Summary = 5894 ( 5886 )
-STATSHAPE : Solid = 8 ( 8 ) Shell = 230 ( 230 ) Face = 734 ( 730 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 2325 ( 2325 )
-TOLERANCE : MaxTol = 0.007776555629 ( 0.009838987775 ) AvgTol = 0.0001629422998 ( 0.0003475330146 )
-LABELS : N0Labels = 3 ( 3 ) N1Labels = 2 ( 3 ) N2Labels = 0 ( 1 ) TotalLabels = 5 ( 7 ) NameLabels = 5 ( 5 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 1 ( 1 ) Volume = 1 ( 1 ) Area = 1 ( 1 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 38 -max_faults 0
+checkxstat D_First -n0 3 -n1 3 -n2 1 -total 7 -withname 5 -withcolor 0 -withlayer 0 -centroid 1 -volume 1 -area 1 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 2 -max_faces 2 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 8 -shell 230 -face 730 -shape 5886
+checkstatshape res_1 -solid 8 -shell 230 -face 730 -freewire 0 -freeedge 0 -sharededge 2325
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.009838987775 -avg 0.0003475330146]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 38 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 24 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3 -n1 3 -n2 1 -total 7 -withname 5 -withcolor 0 -withlayer 0 -centroid 1 -volume 1 -area 1 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 1 -volume 1 -area 1 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 2 -max_faces 2 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 8 -shell 230 -face 734 -shape 5894 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 8 -shell 230 -face 734 -freewire 0 -freeedge 0 -sharededge 2325 -max_solid 8 -max_shell 230 -max_face 730 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.007776555629 -avg 0.0001629422998 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename 1084837_solide.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 7 ( 10 ) Summary = 7 ( 10 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 96 ( 96 ) Shell = 96 ( 96 ) Face = 1550 ( 1550 ) Summary = 9569 ( 9569 )
-STATSHAPE : Solid = 157 ( 157 ) Shell = 157 ( 157 ) Face = 2165 ( 2165 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 3746 ( 3746 )
-TOLERANCE : MaxTol = 0.09605390893 ( 0.2017069355 ) AvgTol = 0.004037409197 ( 0.008789463002 )
-LABELS : N0Labels = 112 ( 112 ) N1Labels = 170 ( 170 ) N2Labels = 0 ( 0 ) TotalLabels = 282 ( 282 ) NameLabels = 282 ( 282 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 28 -max_faults 0
+checkxstat D_First -n0 112 -n1 170 -n2 0 -total 282 -withname 282 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 96 -shell 96 -face 1550 -shape 9569
+checkstatshape res_1 -solid 157 -shell 157 -face 2165 -freewire 0 -freeedge 0 -sharededge 3746
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.2017069355 -avg 0.008789463002]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 28 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 6 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 112 -n1 170 -n2 0 -total 282 -withname 282 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 112 -n1 170 -n2 0 -total 282 -withname 282 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 96 -shell 96 -face 1550 -shape 9569 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 157 -shell 157 -face 2165 -freewire 0 -freeedge 0 -sharededge 3746 -max_solid 157 -max_shell 157 -max_face 2165 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.09605390893 -avg 0.004037409197 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename 16.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 4 ( 7 ) Summary = 4 ( 7 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 9 ( 9 ) Shell = 9 ( 9 ) Face = 103 ( 103 ) Summary = 654 ( 654 )
-STATSHAPE : Solid = 9 ( 9 ) Shell = 9 ( 9 ) Face = 103 ( 103 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 244 ( 244 )
-TOLERANCE : MaxTol = 0.0008797425518 ( 0.0008797425526 ) AvgTol = 0.0001325839995 ( 0.0001325704996 )
-LABELS : N0Labels = 14 ( 14 ) N1Labels = 13 ( 13 ) N2Labels = 0 ( 0 ) TotalLabels = 27 ( 27 ) NameLabels = 27 ( 27 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 8 -max_faults 0
+checkxstat D_First -n0 14 -n1 13 -n2 0 -total 27 -withname 27 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 9 -shell 9 -face 103 -shape 654
+checkstatshape res_1 -solid 9 -shell 9 -face 103 -freewire 0 -freeedge 0 -sharededge 244
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.0008797425526 -avg 0.0001325704996]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 8 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 3 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 14 -n1 13 -n2 0 -total 27 -withname 27 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 14 -n1 13 -n2 0 -total 27 -withname 27 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 9 -shell 9 -face 103 -shape 654 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 9 -shell 9 -face 103 -freewire 0 -freeedge 0 -sharededge 244 -max_solid 9 -max_shell 9 -max_face 103 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.0008797425518 -avg 0.0001325839995 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
-
set filename BUC50070.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 71 ( 65 ) Summary = 71 ( 65 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 445 ( 445 ) Face = 445 ( 445 ) Summary = 5378 ( 3758 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 445 ( 445 ) Face = 445 ( 445 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 2023 ( 1600 )
-TOLERANCE : MaxTol = 0.08129076078 ( 0.1779929979 ) AvgTol = 0.002456311675 ( 0.01536489548 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 893 ( 893 ) N2Labels = 0 ( 0 ) TotalLabels = 894 ( 894 ) NameLabels = 1 ( 1 ) ColorLabels = 448 ( 448 ) LayerLabels = 448 ( 448 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 6 ( 6 )
-COLORS : Colors = CYAN1 GRAY53 GREEN RED WHITE YELLOW ( CYAN1 GRAY53 GREEN RED WHITE YELLOW )
-NLAYERS : NLayers = 4 ( 4 )
-LAYERS : Layers = 215 242 254 5 ( 215 242 254 5 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 64 -max_faults 0
+checkxstat D_First -n0 1 -n1 893 -n2 0 -total 894 -withname 1 -withcolor 448 -withlayer 448 -centroid 0 -volume 0 -area 0 -colors { CYAN1 GRAY53 GREEN RED WHITE YELLOW } -nbcolors 6 -layers { 215 242 254 5 } -nblayers 4
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 445 -face 445 -shape 3758
+checkstatshape res_1 -solid 0 -shell 445 -face 445 -freewire 0 -freeedge 0 -sharededge 1600
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.1779929979 -avg 0.01536489548]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 64 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 73 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 893 -n2 0 -total 894 -withname 1 -withcolor 448 -withlayer 448 -centroid 0 -volume 0 -area 0 -nbcolors 6 -nblayers 4
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 893 -n2 0 -total 894 -withname 1 -withcolor 448 -withlayer 448 -centroid 0 -volume 0 -area 0 -colors { CYAN1 GRAY53 GREEN RED WHITE YELLOW } -nbcolors 6 -layers { 215 242 254 5 } -nblayers 4
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 445 -face 445 -shape 5378 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 445 -face 445 -freewire 0 -freeedge 0 -sharededge 2023 -max_solid 0 -max_shell 445 -max_face 445 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.08129076078 -avg 0.002456311675 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename BUC60031.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 22 ( 22 ) Summary = 188 ( 171 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 22 ( 22 ) FreeWire = 0 ( 0 ) FreeEdge = 17 ( 17 ) SharedEdge = 63 ( 63 )
-TOLERANCE : MaxTol = 0.01755162064 ( 0.05734823138 ) AvgTol = 0.004026464306 ( 0.008726035474 )
-LABELS : N0Labels = 3 ( 3 ) N1Labels = 19 ( 19 ) N2Labels = 0 ( 0 ) TotalLabels = 22 ( 22 ) NameLabels = 5 ( 5 ) ColorLabels = 18 ( 18 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 4 ( 4 )
-COLORS : Colors = CYAN1 GREEN MAGENTA1 MEDIUMSEAGREEN ( CYAN1 GREEN MAGENTA1 MEDIUMSEAGREEN )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 3 -n1 19 -n2 0 -total 22 -withname 5 -withcolor 18 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { CYAN1 GREEN MAGENTA1 MEDIUMSEAGREEN } -nbcolors 4 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 22 -shape 171
+checkstatshape res_1 -solid 1 -shell 1 -face 22 -freewire 0 -freeedge 17 -sharededge 63
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.05734823138 -avg 0.008726035474]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3 -n1 19 -n2 0 -total 22 -withname 5 -withcolor 18 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 4 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 19 -n2 0 -total 22 -withname 5 -withcolor 18 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { CYAN1 GREEN MAGENTA1 MEDIUMSEAGREEN } -nbcolors 4 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 22 -shape 188 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 22 -freewire 0 -freeedge 17 -sharededge 63 -max_solid 1 -max_shell 1 -max_face 22 -max_freewire 0 -max_freeedge 17
+checkmaxtol res_2 -tol 0.01755162064 -avg 0.004026464306 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename BUC61003-4.stp
-set ref_data {
-DATA : Faulties = 0 ( 232 ) Warnings = 0 ( 681 ) Summary = 0 ( 913 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 22 ( 22 ) Summary = 22 ( 22 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 2 ( 2 ) Shell = 2 ( 2 ) Face = 350 ( 350 ) Summary = 2203 ( 2203 )
-STATSHAPE : Solid = 2 ( 2 ) Shell = 2 ( 2 ) Face = 350 ( 350 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 866 ( 866 )
-TOLERANCE : MaxTol = 0.04160902668 ( 0.04160944277 ) AvgTol = 0.0008790179633 ( 0.0008790209723 )
-LABELS : N0Labels = 3 ( 3 ) N1Labels = 2 ( 2 ) N2Labels = 0 ( 0 ) TotalLabels = 5 ( 5 ) NameLabels = 5 ( 5 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 681 -max_faults 232
+checkdoc "tpstat c" -max_warns 22 -max_faults 0
+checkxstat D_First -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 2 -shell 2 -face 350 -shape 2203
+checkstatshape res_1 -solid 2 -shell 2 -face 350 -freewire 0 -freeedge 0 -sharededge 866
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.04160944277 -avg 0.0008790209723]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 681 -max_faults 232
+checkdoc "tpstat c" -max_warns 22 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 22 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 2 -shell 2 -face 350 -shape 2203 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 2 -shell 2 -face 350 -freewire 0 -freeedge 0 -sharededge 866 -max_solid 2 -max_shell 2 -max_face 350 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.04160902668 -avg 0.0008790179633 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename CTS21491.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 247 ( 293 ) Summary = 247 ( 293 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 477 ( 477 ) Face = 477 ( 477 ) Summary = 7321 ( 7321 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 477 ( 477 ) Face = 477 ( 477 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 2944 ( 2944 )
-TOLERANCE : MaxTol = 0.07455430074 ( 0.07455430075 ) AvgTol = 0.00330432696 ( 0.003326327937 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 293 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 477 -face 477 -shape 7321
+checkstatshape res_1 -solid 0 -shell 477 -face 477 -freewire 0 -freeedge 0 -sharededge 2944
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.07455430075 -avg 0.003326327937]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 293 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 246 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 477 -face 477 -shape 7321 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 477 -face 477 -freewire 0 -freeedge 0 -sharededge 2944 -max_solid 0 -max_shell 477 -max_face 477 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.07455430074 -avg 0.00330432696 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TOLERANCE : Faulty"
-
set filename CTS21866.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 126 ( 67 ) Summary = 126 ( 67 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 4 ( 4 ) Shell = 4 ( 4 ) Face = 1393 ( 1393 ) Summary = 9157 ( 9157 )
-STATSHAPE : Solid = 6 ( 6 ) Shell = 6 ( 6 ) Face = 1459 ( 1459 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 3853 ( 3853 )
-TOLERANCE : MaxTol = 0.1527629212 ( 0.1473148116 ) AvgTol = 0.0009767377272 ( 0.001291090251 )
-LABELS : N0Labels = 5 ( 5 ) N1Labels = 1261 ( 1261 ) N2Labels = 0 ( 0 ) TotalLabels = 1266 ( 1266 ) NameLabels = 11 ( 11 ) ColorLabels = 0 ( 0 ) LayerLabels = 1255 ( 1255 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 3 ( 3 )
-LAYERS : Layers = DECKEL GEHAEUSE KONTAKTE ( DECKEL GEHAEUSE KONTAKTE )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 66 -max_faults 0
+checkxstat D_First -n0 5 -n1 1261 -n2 0 -total 1266 -withname 11 -withcolor 0 -withlayer 1255 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { DECKEL GEHAEUSE KONTAKTE } -nblayers 3
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 4 -shell 4 -face 1393 -shape 9157
+checkstatshape res_1 -solid 6 -shell 6 -face 1459 -freewire 0 -freeedge 0 -sharededge 3853
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.1473148116 -avg 0.001291090251]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 66 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 63 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 5 -n1 1261 -n2 0 -total 1266 -withname 11 -withcolor 0 -withlayer 1255 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 3
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 5 -n1 1261 -n2 0 -total 1266 -withname 11 -withcolor 0 -withlayer 1255 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { DECKEL GEHAEUSE KONTAKTE } -nblayers 3
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 4 -shell 4 -face 1393 -shape 9157 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 6 -shell 6 -face 1459 -freewire 0 -freeedge 0 -sharededge 3853 -max_solid 6 -max_shell 6 -max_face 1459 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.1527629212 -avg 0.0009767377272 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename Inventor_TireRim.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 91 ( 169 ) Summary = 91 ( 169 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 466 ( 466 ) Summary = 2894 ( 2894 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 466 ( 466 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 1225 ( 1225 )
-TOLERANCE : MaxTol = 0.04984111402 ( 0.04984111401 ) AvgTol = 0.002492874968 ( 0.002498774731 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 169 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 466 -shape 2894
+checkstatshape res_1 -solid 1 -shell 1 -face 466 -freewire 0 -freeedge 0 -sharededge 1225
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.04984111401 -avg 0.002498774731]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 169 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 91 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 466 -shape 2894 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 466 -freewire 0 -freeedge 0 -sharededge 1225 -max_solid 1 -max_shell 1 -max_face 466 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.04984111402 -avg 0.002492874968 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
-
set filename PRO10373.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 27 ( 26 ) Summary = 27 ( 26 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 9 ( 9 ) Face = 61 ( 61 ) Summary = 377 ( 377 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 9 ( 9 ) Face = 61 ( 61 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 143 ( 143 )
-TOLERANCE : MaxTol = 0.5015928415 ( 0.50770021 ) AvgTol = 0.01708363244 ( 0.01729370712 )
-LABELS : N0Labels = 3 ( 3 ) N1Labels = 2 ( 2 ) N2Labels = 0 ( 0 ) TotalLabels = 5 ( 5 ) NameLabels = 5 ( 5 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 26 -max_faults 0
+checkxstat D_First -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 9 -face 61 -shape 377
+checkstatshape res_1 -solid 1 -shell 9 -face 61 -freewire 0 -freeedge 0 -sharededge 143
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.50770021 -avg 0.01729370712]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 26 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 27 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 9 -face 61 -shape 377 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 9 -face 61 -freewire 0 -freeedge 0 -sharededge 143 -max_solid 1 -max_shell 9 -max_face 61 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.5015928415 -avg 0.01708363244 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename PRO10377.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 24 ( 24 ) Summary = 24 ( 24 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 3 ( 3 ) Face = 354 ( 354 ) Summary = 2188 ( 2188 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 3 ( 3 ) Face = 354 ( 354 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 930 ( 930 )
-TOLERANCE : MaxTol = 0.09560277261 ( 0.1543839281 ) AvgTol = 0.03139788864 ( 0.04139291286 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 24 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 3 -face 354 -shape 2188
+checkstatshape res_1 -solid 0 -shell 3 -face 354 -freewire 0 -freeedge 0 -sharededge 930
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.1543839281 -avg 0.04139291286]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 24 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 24 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 3 -face 354 -shape 2188 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 3 -face 354 -freewire 0 -freeedge 0 -sharededge 930 -max_solid 0 -max_shell 3 -max_face 354 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.09560277261 -avg 0.03139788864 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: NBSHAPES : Faulty"
puts "TODO CR23096 ALL: TPSTAT : Faulty"
-set LinuxDiff 1
-set LinuxFaulties {TOLERANCE}
set filename PRO7226.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 76 ( 68 ) Summary = 76 ( 68 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 101 ( 101 ) Face = 101 ( 101 ) Summary = 6262 ( 6272 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 101 ( 101 ) Face = 101 ( 101 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 2988 ( 2998 )
-TOLERANCE : MaxTol = 0.1351488154 ( 0.1351488154 ) AvgTol = 0.00169512314 ( 0.006333173283 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 68 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 101 -face 101 -shape 6272
+checkstatshape res_1 -solid 0 -shell 101 -face 101 -freewire 0 -freeedge 0 -sharededge 2998
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.1351488154 -avg 0.006333173283]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 68 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 69 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 101 -face 101 -shape 6262 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 101 -face 101 -freewire 0 -freeedge 0 -sharededge 2988 -max_solid 0 -max_shell 101 -max_face 101 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.1351488154 -avg 0.00169512314 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename PRO7656.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 109 ( 112 ) Summary = 109 ( 112 )
-CHECKSHAPE : Wires = 6 ( 6 ) Faces = 6 ( 6 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 5 ( 5 ) Face = 627 ( 627 ) Summary = 3983 ( 3978 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 5 ( 5 ) Face = 627 ( 627 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 1693 ( 1693 )
-TOLERANCE : MaxTol = 14.02132488 ( 14.02132488 ) AvgTol = 0.1145137668 ( 0.1145273704 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 112 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 6 -max_faces 6 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 5 -face 627 -shape 3978
+checkstatshape res_1 -solid 0 -shell 5 -face 627 -freewire 0 -freeedge 0 -sharededge 1693
+set max_tol_res_1 [checkmaxtol res_1 -tol 14.02132488 -avg 0.1145273704]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 112 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 109 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 6 -max_faces 6 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 6 -max_faces 6 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 5 -face 627 -shape 3983 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 5 -face 627 -freewire 0 -freeedge 0 -sharededge 1693 -max_solid 0 -max_shell 5 -max_face 627 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 14.02132488 -avg 0.1145137668 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
-
set filename PRO9235.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 295 ( 277 ) Summary = 295 ( 277 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 2 ( 2 ) Shell = 14 ( 14 ) Face = 279 ( 279 ) Summary = 1792 ( 1791 )
-STATSHAPE : Solid = 2 ( 2 ) Shell = 14 ( 14 ) Face = 279 ( 279 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 751 ( 751 )
-TOLERANCE : MaxTol = 0.02066365379 ( 0.1558132402 ) AvgTol = 0.002609634055 ( 0.003802439206 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 2 ( 2 ) N2Labels = 0 ( 0 ) TotalLabels = 3 ( 3 ) NameLabels = 1 ( 1 ) ColorLabels = 2 ( 2 ) LayerLabels = 2 ( 2 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = WHITE ( WHITE )
-NLAYERS : NLayers = 2 ( 2 )
-LAYERS : Layers = 131 200 ( 131 200 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 277 -max_faults 0
+checkxstat D_First -n0 1 -n1 2 -n2 0 -total 3 -withname 1 -withcolor 2 -withlayer 2 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { 131 200 } -nblayers 2
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 2 -shell 14 -face 279 -shape 1791
+checkstatshape res_1 -solid 2 -shell 14 -face 279 -freewire 0 -freeedge 0 -sharededge 751
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.1558132402 -avg 0.003802439206]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 277 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 295 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 2 -n2 0 -total 3 -withname 1 -withcolor 2 -withlayer 2 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 2
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 2 -n2 0 -total 3 -withname 1 -withcolor 2 -withlayer 2 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { 131 200 } -nblayers 2
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 2 -shell 14 -face 279 -shape 1792 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 2 -shell 14 -face 279 -freewire 0 -freeedge 0 -sharededge 751 -max_solid 2 -max_shell 14 -max_face 279 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.02066365379 -avg 0.002609634055 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
-
set filename UKI60569-1.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 77 ( 57 ) Summary = 77 ( 57 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 219 ( 219 ) Face = 219 ( 219 ) Summary = 2949 ( 2949 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 219 ( 219 ) Face = 219 ( 219 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 1169 ( 1169 )
-TOLERANCE : MaxTol = 0.003116412498 ( 0.003116412498 ) AvgTol = 8.305379074e-006 ( 8.305941009e-006 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 57 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 219 -face 219 -shape 2949
+checkstatshape res_1 -solid 0 -shell 219 -face 219 -freewire 0 -freeedge 0 -sharededge 1169
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.003116412498 -avg 8.305941009e-006]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 57 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 77 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 219 -face 219 -shape 2949 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 219 -face 219 -freewire 0 -freeedge 0 -sharededge 1169 -max_solid 0 -max_shell 219 -max_face 219 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.003116412498 -avg 8.305379074e-006 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename Z1MDT6.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 29 ( 195 ) Summary = 29 ( 195 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 2 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 2 ( 2 ) Shell = 2 ( 2 ) Face = 372 ( 372 ) Summary = 2869 ( 2869 )
-STATSHAPE : Solid = 3 ( 3 ) Shell = 3 ( 3 ) Face = 384 ( 384 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 1244 ( 1244 )
-TOLERANCE : MaxTol = 0.0007170960464 ( 0.0007171032164 ) AvgTol = 1.914460687e-005 ( 2.129229514e-005 )
-LABELS : N0Labels = 3 ( 3 ) N1Labels = 3 ( 3 ) N2Labels = 0 ( 0 ) TotalLabels = 6 ( 6 ) NameLabels = 6 ( 6 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 196 -max_faults 0
+checkxstat D_First -n0 3 -n1 3 -n2 0 -total 6 -withname 6 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 2 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 2 -shell 2 -face 372 -shape 2869
+checkstatshape res_1 -solid 3 -shell 3 -face 384 -freewire 0 -freeedge 0 -sharededge 1244
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.0007171032164 -avg 2.129229514e-005]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 196 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 29 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3 -n1 3 -n2 0 -total 6 -withname 6 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 3 -n2 0 -total 6 -withname 6 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 2 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 2 -shell 2 -face 372 -shape 2869 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 3 -shell 3 -face 384 -freewire 0 -freeedge 0 -sharededge 1244 -max_solid 3 -max_shell 3 -max_face 384 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.0007170960464 -avg 1.914460687e-005 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename bm2_db_exhaust-A.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 4 ( 6 ) Summary = 4 ( 6 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 3 ( 3 ) Shell = 3 ( 3 ) Face = 41 ( 41 ) Summary = 612 ( 612 )
-STATSHAPE : Solid = 3 ( 3 ) Shell = 3 ( 3 ) Face = 41 ( 41 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 275 ( 275 )
-TOLERANCE : MaxTol = 0.003916476016 ( 0.02740530648 ) AvgTol = 0.00042102894 ( 0.001697797351 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 3 ( 3 ) N2Labels = 0 ( 0 ) TotalLabels = 4 ( 4 ) NameLabels = 1 ( 1 ) ColorLabels = 3 ( 3 ) LayerLabels = 3 ( 3 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = GREEN ( GREEN )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 2 ( { 2} )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+checkxstat D_First -n0 1 -n1 3 -n2 0 -total 4 -withname 1 -withcolor 3 -withlayer 3 -centroid 0 -volume 0 -area 0 -colors { GREEN } -nbcolors 1 -layers { " 2" } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 3 -shell 3 -face 41 -shape 612
+checkstatshape res_1 -solid 3 -shell 3 -face 41 -freewire 0 -freeedge 0 -sharededge 275
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.02740530648 -avg 0.001697797351]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 3 -n2 0 -total 4 -withname 1 -withcolor 3 -withlayer 3 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 3 -n2 0 -total 4 -withname 1 -withcolor 3 -withlayer 3 -centroid 0 -volume 0 -area 0 -colors { GREEN } -nbcolors 1 -layers { 2 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 3 -shell 3 -face 41 -shape 612 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 3 -shell 3 -face 41 -freewire 0 -freeedge 0 -sharededge 275 -max_solid 3 -max_shell 3 -max_face 41 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.003916476016 -avg 0.00042102894 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename bm2_db_exhaust-B.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 4 ( 7 ) Summary = 4 ( 7 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 3 ( 3 ) Shell = 3 ( 3 ) Face = 41 ( 41 ) Summary = 612 ( 612 )
-STATSHAPE : Solid = 3 ( 3 ) Shell = 3 ( 3 ) Face = 41 ( 41 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 275 ( 275 )
-TOLERANCE : MaxTol = 0.003916476016 ( 0.02740530648 ) AvgTol = 0.0004210271522 ( 0.001697795563 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 3 ( 3 ) N2Labels = 0 ( 0 ) TotalLabels = 4 ( 4 ) NameLabels = 1 ( 1 ) ColorLabels = 3 ( 3 ) LayerLabels = 3 ( 3 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = GREEN ( GREEN )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 2 ( { 2} )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 5 -max_faults 0
+checkxstat D_First -n0 1 -n1 3 -n2 0 -total 4 -withname 1 -withcolor 3 -withlayer 3 -centroid 0 -volume 0 -area 0 -colors { GREEN } -nbcolors 1 -layers { " 2" } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 3 -shell 3 -face 41 -shape 612
+checkstatshape res_1 -solid 3 -shell 3 -face 41 -freewire 0 -freeedge 0 -sharededge 275
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.02740530648 -avg 0.001697795563]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 5 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 3 -n2 0 -total 4 -withname 1 -withcolor 3 -withlayer 3 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 3 -n2 0 -total 4 -withname 1 -withcolor 3 -withlayer 3 -centroid 0 -volume 0 -area 0 -colors { GREEN } -nbcolors 1 -layers { 2 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 3 -shell 3 -face 41 -shape 612 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 3 -shell 3 -face 41 -freewire 0 -freeedge 0 -sharededge 275 -max_solid 3 -max_shell 3 -max_face 41 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.003916476016 -avg 0.0004210271522 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename bm2_db_exhaust-C.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 4 ( 7 ) Summary = 4 ( 7 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 3 ( 3 ) Shell = 3 ( 3 ) Face = 41 ( 41 ) Summary = 612 ( 612 )
-STATSHAPE : Solid = 3 ( 3 ) Shell = 3 ( 3 ) Face = 41 ( 41 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 275 ( 275 )
-TOLERANCE : MaxTol = 0.003917262203 ( 0.02740530648 ) AvgTol = 0.0004367734404 ( 0.001885763158 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 3 ( 3 ) N2Labels = 0 ( 0 ) TotalLabels = 4 ( 4 ) NameLabels = 1 ( 1 ) ColorLabels = 3 ( 3 ) LayerLabels = 3 ( 3 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = GREEN ( GREEN )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 2 ( { 2} )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 5 -max_faults 0
+checkxstat D_First -n0 1 -n1 3 -n2 0 -total 4 -withname 1 -withcolor 3 -withlayer 3 -centroid 0 -volume 0 -area 0 -colors { GREEN } -nbcolors 1 -layers { " 2" } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 3 -shell 3 -face 41 -shape 612
+checkstatshape res_1 -solid 3 -shell 3 -face 41 -freewire 0 -freeedge 0 -sharededge 275
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.02740530648 -avg 0.001885763158]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 5 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 3 -n2 0 -total 4 -withname 1 -withcolor 3 -withlayer 3 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 3 -n2 0 -total 4 -withname 1 -withcolor 3 -withlayer 3 -centroid 0 -volume 0 -area 0 -colors { GREEN } -nbcolors 1 -layers { 2 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 3 -shell 3 -face 41 -shape 612 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 3 -shell 3 -face 41 -freewire 0 -freeedge 0 -sharededge 275 -max_solid 3 -max_shell 3 -max_face 41 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.003917262203 -avg 0.0004367734404 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename bm2_ug_exhaust-A.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 25 ) Summary = 0 ( 25 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 5 ( 5 ) Shell = 5 ( 5 ) Face = 50 ( 50 ) Summary = 273 ( 273 )
-STATSHAPE : Solid = 5 ( 5 ) Shell = 5 ( 5 ) Face = 50 ( 50 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 96 ( 96 )
-TOLERANCE : MaxTol = 0.006784355905 ( 0.00678435592 ) AvgTol = 0.0007838067287 ( 0.0007869237263 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 25 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 5 -shell 5 -face 50 -shape 273
+checkstatshape res_1 -solid 5 -shell 5 -face 50 -freewire 0 -freeedge 0 -sharededge 96
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.00678435592 -avg 0.0007869237263]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 25 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 5 -shell 5 -face 50 -shape 273 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 5 -shell 5 -face 50 -freewire 0 -freeedge 0 -sharededge 96 -max_solid 5 -max_shell 5 -max_face 50 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.006784355905 -avg 0.0007838067287 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename bm2_ug_exhaust-B.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 25 ) Summary = 0 ( 25 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 5 ( 5 ) Shell = 5 ( 5 ) Face = 50 ( 50 ) Summary = 273 ( 273 )
-STATSHAPE : Solid = 5 ( 5 ) Shell = 5 ( 5 ) Face = 50 ( 50 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 96 ( 96 )
-TOLERANCE : MaxTol = 0.001619917869 ( 0.001619918114 ) AvgTol = 0.0001230803969 ( 0.0001261972435 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 25 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 5 -shell 5 -face 50 -shape 273
+checkstatshape res_1 -solid 5 -shell 5 -face 50 -freewire 0 -freeedge 0 -sharededge 96
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.001619918114 -avg 0.0001261972435]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 25 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 5 -shell 5 -face 50 -shape 273 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 5 -shell 5 -face 50 -freewire 0 -freeedge 0 -sharededge 96 -max_solid 5 -max_shell 5 -max_face 50 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.001619917869 -avg 0.0001230803969 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename bm4_ca_seal.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 13 ( 13 ) Summary = 13 ( 13 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 15 ( 15 ) Summary = 516 ( 445 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 15 ( 15 ) FreeWire = 0 ( 0 ) FreeEdge = 70 ( 70 ) SharedEdge = 109 ( 109 )
-TOLERANCE : MaxTol = 1e-007 ( 1.00010073e-007 ) AvgTol = 1e-007 ( 1.000025586e-007 )
-LABELS : N0Labels = 3 ( 3 ) N1Labels = 2 ( 2 ) N2Labels = 0 ( 0 ) TotalLabels = 5 ( 5 ) NameLabels = 5 ( 5 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 13 -max_faults 0
+checkxstat D_First -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 15 -shape 445
+checkstatshape res_1 -solid 1 -shell 1 -face 15 -freewire 0 -freeedge 70 -sharededge 109
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.00010073e-007 -avg 1.000025586e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 13 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 13 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 15 -shape 516 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 15 -freewire 0 -freeedge 70 -sharededge 109 -max_solid 1 -max_shell 1 -max_face 15 -max_freewire 0 -max_freeedge 70
+checkmaxtol res_2 -tol 1e-007 -avg 1e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename bm4_pe_seal_a.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 3 ( 3 ) Face = 24 ( 24 ) Summary = 124 ( 124 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 3 ( 3 ) Face = 24 ( 24 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 48 ( 48 )
-TOLERANCE : MaxTol = 1e-007 ( 1e-007 ) AvgTol = 1e-007 ( 1e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 3 -face 24 -shape 124
+checkstatshape res_1 -solid 1 -shell 3 -face 24 -freewire 0 -freeedge 0 -sharededge 48
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-007 -avg 1e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 3 -face 24 -shape 124 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 3 -face 24 -freewire 0 -freeedge 0 -sharededge 48 -max_solid 1 -max_shell 3 -max_face 24 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1e-007 -avg 1e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename bm4_sd_conn_d.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 3 ( 3 ) Shell = 3 ( 3 ) Face = 501 ( 501 ) Summary = 3639 ( 3639 )
-STATSHAPE : Solid = 57 ( 57 ) Shell = 57 ( 57 ) Face = 1912 ( 1912 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 1478 ( 1478 )
-TOLERANCE : MaxTol = 1e-007 ( 1e-007 ) AvgTol = 1e-007 ( 1e-007 )
-LABELS : N0Labels = 5 ( 5 ) N1Labels = 32 ( 32 ) N2Labels = 0 ( 0 ) TotalLabels = 37 ( 37 ) NameLabels = 36 ( 36 ) ColorLabels = 4 ( 4 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 4 ( 4 )
-COLORS : Colors = GREEN MEDIUMTURQUOISE RED YELLOW ( GREEN MEDIUMTURQUOISE RED YELLOW )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 5 -n1 32 -n2 0 -total 37 -withname 36 -withcolor 4 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { GREEN MEDIUMTURQUOISE RED YELLOW } -nbcolors 4 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 3 -shell 3 -face 501 -shape 3639
+checkstatshape res_1 -solid 57 -shell 57 -face 1912 -freewire 0 -freeedge 0 -sharededge 1478
+set max_tol_res_1 [checkmaxtol res_1 -tol 1e-007 -avg 1e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 5 -n1 32 -n2 0 -total 37 -withname 36 -withcolor 4 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 4 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 5 -n1 32 -n2 0 -total 37 -withname 36 -withcolor 4 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { GREEN MEDIUMTURQUOISE RED YELLOW } -nbcolors 4 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 3 -shell 3 -face 501 -shape 3639 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 57 -shell 57 -face 1912 -freewire 0 -freeedge 0 -sharededge 1478 -max_solid 57 -max_shell 57 -max_face 1912 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 1e-007 -avg 1e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
-
set filename bm4_sd_punch_d.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 10 ( 0 ) Summary = 10 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 3 ( 3 ) Shell = 4 ( 4 ) Face = 204 ( 204 ) Summary = 1367 ( 1367 )
-STATSHAPE : Solid = 3 ( 3 ) Shell = 4 ( 4 ) Face = 204 ( 204 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 554 ( 554 )
-TOLERANCE : MaxTol = 6.188728122e-007 ( 7.498981519e-007 ) AvgTol = 1.4369871e-007 ( 1.554329149e-007 )
-LABELS : N0Labels = 5 ( 5 ) N1Labels = 41 ( 41 ) N2Labels = 0 ( 0 ) TotalLabels = 46 ( 46 ) NameLabels = 9 ( 9 ) ColorLabels = 41 ( 41 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 3 ( 3 )
-COLORS : Colors = BLUE1 GREEN RED ( BLUE1 GREEN RED )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 5 -n1 41 -n2 0 -total 46 -withname 9 -withcolor 41 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 GREEN RED } -nbcolors 3 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 3 -shell 4 -face 204 -shape 1367
+checkstatshape res_1 -solid 3 -shell 4 -face 204 -freewire 0 -freeedge 0 -sharededge 554
+set max_tol_res_1 [checkmaxtol res_1 -tol 7.498981519e-007 -avg 1.554329149e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 10 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 5 -n1 41 -n2 0 -total 46 -withname 9 -withcolor 41 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 3 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 5 -n1 41 -n2 0 -total 46 -withname 9 -withcolor 41 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 GREEN RED } -nbcolors 3 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 3 -shell 4 -face 204 -shape 1367 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 3 -shell 4 -face 204 -freewire 0 -freeedge 0 -sharededge 554 -max_solid 3 -max_shell 4 -max_face 204 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 6.188728122e-007 -avg 1.4369871e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: NBSHAPES : Faulty"
-
set filename bm4_tc_seal.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 13 ( 13 ) Summary = 13 ( 13 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 15 ( 15 ) Summary = 360 ( 445 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 15 ( 15 ) FreeWire = 0 ( 0 ) FreeEdge = 70 ( 70 ) SharedEdge = 109 ( 109 )
-TOLERANCE : MaxTol = 1.00005e-007 ( 1.00005e-007 ) AvgTol = 1.000022658e-007 ( 1.000016966e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 1 ( 1 ) N2Labels = 0 ( 0 ) TotalLabels = 2 ( 2 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 1 ( 1 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = MEDIUMVIOLETRED ( MEDIUMVIOLETRED )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 050 ( 050 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 13 -max_faults 0
+checkxstat D_First -n0 1 -n1 1 -n2 0 -total 2 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { MEDIUMVIOLETRED } -nbcolors 1 -layers { 050 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 15 -shape 445
+checkstatshape res_1 -solid 1 -shell 1 -face 15 -freewire 0 -freeedge 70 -sharededge 109
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.00005e-007 -avg 1.000016966e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 13 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 13 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 1 -n2 0 -total 2 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 1 -n2 0 -total 2 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { MEDIUMVIOLETRED } -nbcolors 1 -layers { 050 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 15 -shape 360 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 15 -freewire 0 -freeedge 70 -sharededge 109 -max_solid 1 -max_shell 1 -max_face 15 -max_freewire 0 -max_freeedge 70
+checkmaxtol res_2 -tol 1.00005e-007 -avg 1.000022658e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename db_exhaust-A.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 4 ( 6 ) Summary = 4 ( 6 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 3 ( 3 ) Shell = 3 ( 3 ) Face = 41 ( 41 ) Summary = 612 ( 612 )
-STATSHAPE : Solid = 3 ( 3 ) Shell = 3 ( 3 ) Face = 41 ( 41 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 275 ( 275 )
-TOLERANCE : MaxTol = 0.0039188913 ( 0.02740530648 ) AvgTol = 0.0003818758305 ( 0.001491000686 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 3 ( 3 ) N2Labels = 0 ( 0 ) TotalLabels = 4 ( 4 ) NameLabels = 1 ( 1 ) ColorLabels = 3 ( 3 ) LayerLabels = 3 ( 3 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = WHITE ( WHITE )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 2 ( { 2} )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+checkxstat D_First -n0 1 -n1 3 -n2 0 -total 4 -withname 1 -withcolor 3 -withlayer 3 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { " 2" } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 3 -shell 3 -face 41 -shape 612
+checkstatshape res_1 -solid 3 -shell 3 -face 41 -freewire 0 -freeedge 0 -sharededge 275
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.02740530648 -avg 0.001491000686]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 3 -n2 0 -total 4 -withname 1 -withcolor 3 -withlayer 3 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 3 -n2 0 -total 4 -withname 1 -withcolor 3 -withlayer 3 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { 2 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 3 -shell 3 -face 41 -shape 612 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 3 -shell 3 -face 41 -freewire 0 -freeedge 0 -sharededge 275 -max_solid 3 -max_shell 3 -max_face 41 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.0039188913 -avg 0.0003818758305 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename db_exhaust-B.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 4 ( 6 ) Summary = 4 ( 6 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 3 ( 3 ) Shell = 3 ( 3 ) Face = 41 ( 41 ) Summary = 612 ( 612 )
-STATSHAPE : Solid = 3 ( 3 ) Shell = 3 ( 3 ) Face = 41 ( 41 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 275 ( 275 )
-TOLERANCE : MaxTol = 0.0039188913 ( 0.02740530648 ) AvgTol = 0.0003818776183 ( 0.001491002474 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 3 ( 3 ) N2Labels = 0 ( 0 ) TotalLabels = 4 ( 4 ) NameLabels = 1 ( 1 ) ColorLabels = 3 ( 3 ) LayerLabels = 3 ( 3 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = WHITE ( WHITE )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 2 ( { 2} )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+checkxstat D_First -n0 1 -n1 3 -n2 0 -total 4 -withname 1 -withcolor 3 -withlayer 3 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { " 2" } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 3 -shell 3 -face 41 -shape 612
+checkstatshape res_1 -solid 3 -shell 3 -face 41 -freewire 0 -freeedge 0 -sharededge 275
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.02740530648 -avg 0.001491002474]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 3 -n2 0 -total 4 -withname 1 -withcolor 3 -withlayer 3 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 3 -n2 0 -total 4 -withname 1 -withcolor 3 -withlayer 3 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { 2 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 3 -shell 3 -face 41 -shape 612 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 3 -shell 3 -face 41 -freewire 0 -freeedge 0 -sharededge 275 -max_solid 3 -max_shell 3 -max_face 41 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.0039188913 -avg 0.0003818776183 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename ie_soapbox-B.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 10 ( 14 ) Summary = 10 ( 14 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 2 ( 2 ) Shell = 2 ( 2 ) Face = 108 ( 108 ) Summary = 673 ( 673 )
-STATSHAPE : Solid = 2 ( 2 ) Shell = 2 ( 2 ) Face = 108 ( 108 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 282 ( 282 )
-TOLERANCE : MaxTol = 0.5386330267 ( 1.019942733 ) AvgTol = 0.01216555298 ( 0.01597193199 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 14 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 2 -shell 2 -face 108 -shape 673
+checkstatshape res_1 -solid 2 -shell 2 -face 108 -freewire 0 -freeedge 0 -sharededge 282
+set max_tol_res_1 [checkmaxtol res_1 -tol 1.019942733 -avg 0.01597193199]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 14 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 2 -shell 2 -face 108 -shape 673 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 2 -shell 2 -face 108 -freewire 0 -freeedge 0 -sharededge 282 -max_solid 2 -max_shell 2 -max_face 108 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.5386330267 -avg 0.01216555298 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename ie_turbine-B.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 51 ( 51 ) Face = 51 ( 51 ) Summary = 592 ( 592 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 51 ( 51 ) Face = 51 ( 51 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 222 ( 222 )
-TOLERANCE : MaxTol = 0.005061094119 ( 0.00682077312 ) AvgTol = 0.001395581121 ( 0.001517402039 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 51 -face 51 -shape 592
+checkstatshape res_1 -solid 0 -shell 51 -face 51 -freewire 0 -freeedge 0 -sharededge 222
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.00682077312 -avg 0.001517402039]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 51 -face 51 -shape 592 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 51 -face 51 -freewire 0 -freeedge 0 -sharededge 222 -max_solid 0 -max_shell 51 -max_face 51 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.005061094119 -avg 0.001395581121 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename pe_exhaust-B.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 114 ( 114 ) Summary = 632 ( 632 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 114 ( 114 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 252 ( 252 )
-TOLERANCE : MaxTol = 0.000614038038 ( 0.002229059815 ) AvgTol = 0.0001163919322 ( 0.0003895058511 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 114 -shape 632
+checkstatshape res_1 -solid 1 -shell 1 -face 114 -freewire 0 -freeedge 0 -sharededge 252
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.002229059815 -avg 0.0003895058511]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 114 -shape 632 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 114 -freewire 0 -freeedge 0 -sharededge 252 -max_solid 1 -max_shell 1 -max_face 114 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.000614038038 -avg 0.0001163919322 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
-
set filename r0901_ec.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 15 ( 7 ) Summary = 15 ( 7 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 438 ( 438 ) Summary = 2798 ( 2798 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 438 ( 438 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 1136 ( 1136 )
-TOLERANCE : MaxTol = 0.0001456659717 ( 0.0001456659717 ) AvgTol = 8.859916294e-007 ( 9.13363077e-007 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 7 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 438 -shape 2798
+checkstatshape res_1 -solid 1 -shell 1 -face 438 -freewire 0 -freeedge 0 -sharededge 1136
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.0001456659717 -avg 9.13363077e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 7 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 15 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 438 -shape 2798 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 438 -freewire 0 -freeedge 0 -sharededge 1136 -max_solid 1 -max_shell 1 -max_face 438 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.0001456659717 -avg 8.859916294e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename r44sd.stp
-set ref_data {
-DATA : Faulties = 0 ( 19 ) Warnings = 0 ( 0 ) Summary = 0 ( 19 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 2 ( 2 ) Summary = 2 ( 2 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 383 ( 383 ) Summary = 2241 ( 2241 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 383 ( 383 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 922 ( 922 )
-TOLERANCE : MaxTol = 0.01482060006 ( 0.01482060006 ) AvgTol = 0.0001304365465 ( 0.0001304365466 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 57 -max_faults 19
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 383 -shape 2241
+checkstatshape res_1 -solid 1 -shell 1 -face 383 -freewire 0 -freeedge 0 -sharededge 922
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.01482060006 -avg 0.0001304365466]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 57 -max_faults 19
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 383 -shape 2241 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 383 -freewire 0 -freeedge 0 -sharededge 922 -max_solid 1 -max_shell 1 -max_face 383 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.01482060006 -avg 0.0001304365465 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
-
set filename r65b-pe.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 14 ( 4 ) Summary = 14 ( 4 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 4 ( 4 ) Shell = 4 ( 4 ) Face = 676 ( 676 ) Summary = 4405 ( 4405 )
-STATSHAPE : Solid = 4 ( 4 ) Shell = 4 ( 4 ) Face = 676 ( 676 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 1789 ( 1789 )
-TOLERANCE : MaxTol = 0.002842802207 ( 0.01045213326 ) AvgTol = 9.202667589e-005 ( 0.001200450607 )
-LABELS : N0Labels = 5 ( 5 ) N1Labels = 680 ( 680 ) N2Labels = 0 ( 0 ) TotalLabels = 685 ( 685 ) NameLabels = 9 ( 9 ) ColorLabels = 0 ( 0 ) LayerLabels = 676 ( 676 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 4 ( 4 )
-LAYERS : Layers = LAGERNIET LEITBLECH_OBEN SCHLAUCHFASSUNG_OBEN SEILROLLE_1 ( LAGERNIET LEITBLECH_OBEN SCHLAUCHFASSUNG_OBEN SEILROLLE_1 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+checkxstat D_First -n0 5 -n1 680 -n2 0 -total 685 -withname 9 -withcolor 0 -withlayer 676 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { "LAGERNIET" "LEITBLECH_OBEN" "SCHLAUCHFASSUNG_OBEN" "SEILROLLE_1" } -nblayers 4
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 4 -shell 4 -face 676 -shape 4405
+checkstatshape res_1 -solid 4 -shell 4 -face 676 -freewire 0 -freeedge 0 -sharededge 1789
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.01045213326 -avg 0.001200450607]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 5 -n1 680 -n2 0 -total 685 -withname 9 -withcolor 0 -withlayer 676 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 4
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 5 -n1 680 -n2 0 -total 685 -withname 9 -withcolor 0 -withlayer 676 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { "LAGERNIET" "LEITBLECH_OBEN" "SCHLAUCHFASSUNG_OBEN" "SEILROLLE_1" } -nblayers 4
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 4 -shell 4 -face 676 -shape 4405 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 4 -shell 4 -face 676 -freewire 0 -freeedge 0 -sharededge 1789 -max_solid 4 -max_shell 4 -max_face 676 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.002842802207 -avg 9.202667589e-005 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
-
set filename r_39-db.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 230 ( 126 ) Summary = 230 ( 126 )
-CHECKSHAPE : Wires = 3 ( 3 ) Faces = 3 ( 3 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 12 ( 12 ) Shell = 297 ( 297 ) Face = 449 ( 449 ) Summary = 4991 ( 3865 )
-STATSHAPE : Solid = 12 ( 12 ) Shell = 297 ( 297 ) Face = 449 ( 449 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 1935 ( 1842 )
-TOLERANCE : MaxTol = 0.09813029449 ( 0.1674907116 ) AvgTol = 0.00279894343 ( 0.01426972934 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 582 ( 582 ) N2Labels = 0 ( 0 ) TotalLabels = 583 ( 583 ) NameLabels = 1 ( 1 ) ColorLabels = 289 ( 289 ) LayerLabels = 297 ( 297 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 6 ( 6 )
-COLORS : Colors = CYAN1 DODGERBLUE2 GREEN MAGENTA1 WHITE YELLOW ( CYAN1 DODGERBLUE2 GREEN MAGENTA1 WHITE YELLOW )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 0 ( { 0} )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 126 -max_faults 0
+checkxstat D_First -n0 1 -n1 582 -n2 0 -total 583 -withname 1 -withcolor 289 -withlayer 297 -centroid 0 -volume 0 -area 0 -colors { CYAN1 DODGERBLUE2 GREEN MAGENTA1 WHITE YELLOW } -nbcolors 6 -layers { " 0" } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 3 -max_faces 3 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 12 -shell 297 -face 449 -shape 3865
+checkstatshape res_1 -solid 12 -shell 297 -face 449 -freewire 0 -freeedge 0 -sharededge 1842
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.1674907116 -avg 0.01426972934]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 126 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 230 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 582 -n2 0 -total 583 -withname 1 -withcolor 289 -withlayer 297 -centroid 0 -volume 0 -area 0 -nbcolors 6 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 582 -n2 0 -total 583 -withname 1 -withcolor 289 -withlayer 297 -centroid 0 -volume 0 -area 0 -colors { CYAN1 DODGERBLUE2 GREEN MAGENTA1 WHITE YELLOW } -nbcolors 6 -layers { 0 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 3 -max_faces 3 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 3 -max_faces 3 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 12 -shell 297 -face 449 -shape 4991 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 12 -shell 297 -face 449 -freewire 0 -freeedge 0 -sharededge 1935 -max_solid 12 -max_shell 297 -max_face 449 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.09813029449 -avg 0.00279894343 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
-
set filename test-m020306-v1.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 308 ( 115 ) Summary = 308 ( 115 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 742 ( 742 ) Summary = 5060 ( 5060 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 742 ( 742 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 2108 ( 2108 )
-TOLERANCE : MaxTol = 0.008481946718 ( 0.01167681549 ) AvgTol = 0.0001367132065 ( 0.0002869491135 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 114 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 742 -shape 5060
+checkstatshape res_1 -solid 1 -shell 1 -face 742 -freewire 0 -freeedge 0 -sharededge 2108
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.01167681549 -avg 0.0002869491135]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 114 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 152 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 742 -shape 5060 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 742 -freewire 0 -freeedge 0 -sharededge 2108 -max_solid 1 -max_shell 1 -max_face 742 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.008481946718 -avg 0.0001367132065 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
-
set filename test-m020306-v2.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 317 ( 158 ) Summary = 317 ( 158 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 956 ( 956 ) Summary = 6474 ( 6474 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 956 ( 956 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 2681 ( 2681 )
-TOLERANCE : MaxTol = 0.008481946718 ( 0.01167681549 ) AvgTol = 0.0001210014254 ( 0.0003580069299 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 157 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 956 -shape 6474
+checkstatshape res_1 -solid 1 -shell 1 -face 956 -freewire 0 -freeedge 0 -sharededge 2681
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.01167681549 -avg 0.0003580069299]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 157 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 66 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 956 -shape 6474 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 956 -freewire 0 -freeedge 0 -sharededge 2681 -max_solid 1 -max_shell 1 -max_face 956 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.008481946718 -avg 0.0001210014254 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename tr10_r1301_ms.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 1 ( 41 ) Summary = 1 ( 41 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 4 ( 4 ) Shell = 4 ( 4 ) Face = 183 ( 183 ) Summary = 1130 ( 1129 )
-STATSHAPE : Solid = 4 ( 4 ) Shell = 4 ( 4 ) Face = 183 ( 183 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 452 ( 451 )
-TOLERANCE : MaxTol = 0.005574366633 ( 0.008564797627 ) AvgTol = 0.001164173051 ( 0.00186707582 )
-LABELS : N0Labels = 2 ( 2 ) N1Labels = 3 ( 3 ) N2Labels = 0 ( 0 ) TotalLabels = 5 ( 5 ) NameLabels = 2 ( 2 ) ColorLabels = 4 ( 4 ) LayerLabels = 4 ( 4 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = MAGENTA1 RED ( MAGENTA1 RED )
-NLAYERS : NLayers = 2 ( 2 )
-LAYERS : Layers = 3 4 ( 3 4 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 41 -max_faults 0
+checkxstat D_First -n0 2 -n1 3 -n2 0 -total 5 -withname 2 -withcolor 4 -withlayer 4 -centroid 0 -volume 0 -area 0 -colors { MAGENTA1 RED } -nbcolors 2 -layers { 3 4 } -nblayers 2
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 4 -shell 4 -face 183 -shape 1129
+checkstatshape res_1 -solid 4 -shell 4 -face 183 -freewire 0 -freeedge 0 -sharededge 451
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.008564797627 -avg 0.00186707582]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 41 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 2 -n1 3 -n2 0 -total 5 -withname 2 -withcolor 4 -withlayer 4 -centroid 0 -volume 0 -area 0 -nbcolors 2 -nblayers 2
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 2 -n1 3 -n2 0 -total 5 -withname 2 -withcolor 4 -withlayer 4 -centroid 0 -volume 0 -area 0 -colors { MAGENTA1 RED } -nbcolors 2 -layers { 3 4 } -nblayers 2
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 4 -shell 4 -face 183 -shape 1130 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 4 -shell 4 -face 183 -freewire 0 -freeedge 0 -sharededge 452 -max_solid 4 -max_shell 4 -max_face 183 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.005574366633 -avg 0.001164173051 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename tr9_r0101-pe.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 1 ( 8 ) Summary = 1 ( 8 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 621 ( 621 ) Summary = 3645 ( 3645 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 621 ( 621 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 1508 ( 1508 )
-TOLERANCE : MaxTol = 0.009440276946 ( 0.06828121929 ) AvgTol = 0.002406489515 ( 0.006125964434 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = LIGHTGOLDENROD2 ( LIGHTGOLDENROD2 )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 9 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { LIGHTGOLDENROD2 } -nbcolors 1 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 621 -shape 3645
+checkstatshape res_1 -solid 1 -shell 1 -face 621 -freewire 0 -freeedge 0 -sharededge 1508
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.06828121929 -avg 0.006125964434]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 9 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { LIGHTGOLDENROD2 } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 621 -shape 3645 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 621 -freewire 0 -freeedge 0 -sharededge 1508 -max_solid 1 -max_shell 1 -max_face 621 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.009440276946 -avg 0.002406489515 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
-
set filename tr9_r1001-ec.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 133 ( 5 ) Summary = 133 ( 5 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 918 ( 918 ) Summary = 6350 ( 6350 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 918 ( 918 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 2660 ( 2660 )
-TOLERANCE : MaxTol = 0.002778645525 ( 0.005865678105 ) AvgTol = 0.0001074213183 ( 0.0001402835312 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 5 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 918 -shape 6350
+checkstatshape res_1 -solid 1 -shell 1 -face 918 -freewire 0 -freeedge 0 -sharededge 2660
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.005865678105 -avg 0.0001402835312]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 5 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 133 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 918 -shape 6350 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 918 -freewire 0 -freeedge 0 -sharededge 2660 -max_solid 1 -max_shell 1 -max_face 918 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.002778645525 -avg 0.0001074213183 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
-
set filename trj10_b2-os-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 25 ( 6 ) Summary = 25 ( 6 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 16 ( 16 ) Shell = 16 ( 16 ) Face = 950 ( 950 ) Summary = 6131 ( 6131 )
-STATSHAPE : Solid = 31 ( 31 ) Shell = 31 ( 31 ) Face = 1105 ( 1105 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 2501 ( 2501 )
-TOLERANCE : MaxTol = 7.535366351e-007 ( 7.53535827e-007 ) AvgTol = 1.408558019e-007 ( 1.408560905e-007 )
-LABELS : N0Labels = 19 ( 19 ) N1Labels = 33 ( 33 ) N2Labels = 0 ( 0 ) TotalLabels = 52 ( 52 ) NameLabels = 52 ( 52 ) ColorLabels = 16 ( 16 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 5 ( 5 )
-COLORS : Colors = BLUE1 CYAN1 MATRAGRAY RED YELLOW ( BLUE1 CYAN1 MATRAGRAY RED YELLOW )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 6 -max_faults 0
+checkxstat D_First -n0 19 -n1 33 -n2 0 -total 52 -withname 52 -withcolor 16 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 CYAN1 MATRAGRAY RED YELLOW } -nbcolors 5 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 16 -shell 16 -face 950 -shape 6131
+checkstatshape res_1 -solid 31 -shell 31 -face 1105 -freewire 0 -freeedge 0 -sharededge 2501
+set max_tol_res_1 [checkmaxtol res_1 -tol 7.53535827e-007 -avg 1.408560905e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 6 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 25 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 19 -n1 33 -n2 0 -total 52 -withname 52 -withcolor 16 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 5 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 19 -n1 33 -n2 0 -total 52 -withname 52 -withcolor 16 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 CYAN1 MATRAGRAY RED YELLOW } -nbcolors 5 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 16 -shell 16 -face 950 -shape 6131 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 31 -shell 31 -face 1105 -freewire 0 -freeedge 0 -sharededge 2501 -max_solid 31 -max_shell 31 -max_face 1105 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 7.535366351e-007 -avg 1.408558019e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: NBSHAPES : Faulty"
-
set filename trj12_b3-ac-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 27 ( 108 ) Summary = 27 ( 108 )
-CHECKSHAPE : Wires = 4 ( 6 ) Faces = 4 ( 6 ) Shells = 1 ( 1 ) Solids = 1 ( 1 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 1173 ( 1173 ) Summary = 7998 ( 8005 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 1173 ( 1173 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 3392 ( 3399 )
-TOLERANCE : MaxTol = 7.063782203 ( 7.063782203 ) AvgTol = 0.002932793725 ( 0.002941805253 )
-LABELS : N0Labels = 2 ( 2 ) N1Labels = 1 ( 1 ) N2Labels = 0 ( 0 ) TotalLabels = 3 ( 3 ) NameLabels = 3 ( 3 ) ColorLabels = 1 ( 1 ) LayerLabels = 1 ( 1 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = WHITE ( WHITE )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 0 ( 0 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 107 -max_faults 0
+checkxstat D_First -n0 2 -n1 1 -n2 0 -total 3 -withname 3 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { 0 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 6 -max_faces 6 -max_shells 1 -max_solids 1
+checknbshapes res_1 -solid 1 -shell 1 -face 1173 -shape 8005
+checkstatshape res_1 -solid 1 -shell 1 -face 1173 -freewire 0 -freeedge 0 -sharededge 3399
+set max_tol_res_1 [checkmaxtol res_1 -tol 7.063782203 -avg 0.002941805253]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 107 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 27 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 2 -n1 1 -n2 0 -total 3 -withname 3 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 2 -n1 1 -n2 0 -total 3 -withname 3 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { 0 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 6 -max_faces 6 -max_shells 1 -max_solids 1
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 4 -max_faces 4 -max_shells 1 -max_solids 1
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 1173 -shape 7998 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 1173 -freewire 0 -freeedge 0 -sharededge 3392 -max_solid 1 -max_shell 1 -max_face 1173 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 7.063782203 -avg 0.002932793725 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj12_pm10-ac-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 57 ( 95 ) Summary = 57 ( 95 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 20 ( 20 ) Shell = 20 ( 20 ) Face = 1441 ( 1441 ) Summary = 9567 ( 9567 )
-STATSHAPE : Solid = 40 ( 40 ) Shell = 40 ( 40 ) Face = 2036 ( 2036 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 3936 ( 3936 )
-TOLERANCE : MaxTol = 0.004932484407 ( 0.004932484407 ) AvgTol = 2.75392155e-005 ( 2.77391027e-005 )
-LABELS : N0Labels = 41 ( 41 ) N1Labels = 50 ( 50 ) N2Labels = 0 ( 0 ) TotalLabels = 91 ( 91 ) NameLabels = 91 ( 91 ) ColorLabels = 20 ( 20 ) LayerLabels = 20 ( 20 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 15 ( 15 )
-COLORS : Colors = CYAN4 DARKOLIVEGREEN1 DARKSLATEGRAY1 GAINSBORO LIGHTSLATEBLUE MATRAGRAY MEDIUMSPRINGGREEN PURPLE PURPLE SKYBLUE1 SKYBLUE1 SPRINGGREEN2 SPRINGGREEN4 STEELBLUE VIOLET ( CYAN4 DARKOLIVEGREEN1 DARKSLATEGRAY1 GAINSBORO LIGHTSLATEBLUE MATRAGRAY MEDIUMSPRINGGREEN PURPLE PURPLE SKYBLUE1 SKYBLUE1 SPRINGGREEN2 SPRINGGREEN4 STEELBLUE VIOLET )
-NLAYERS : NLayers = 17 ( 17 )
-LAYERS : Layers = 072498_01A|MODEL 072498_01B|MODEL 082399_02|Model 082399_03|MODEL 082399_04A|MODEL 082399_04B|MODEL 082399_05|MODEL 082399_06|MODEL 082399_07|MODEL 082499_03|MODEL 082599_02|Model 082599_03A|Model 082599_03B|Model 082699_01|MODEL LE_Diode|Model Optics_Housing|MODEL Phototransistor|Model ( 072498_01A|MODEL 072498_01B|MODEL 082399_02|Model 082399_03|MODEL 082399_04A|MODEL 082399_04B|MODEL 082399_05|MODEL 082399_06|MODEL 082399_07|MODEL 082499_03|MODEL 082599_02|Model 082599_03A|Model 082599_03B|Model 082699_01|MODEL {LE Diode|Model} {Optics Housing|MODEL} Phototransistor|Model )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 98 -max_faults 0
+checkxstat D_First -n0 41 -n1 50 -n2 0 -total 91 -withname 91 -withcolor 20 -withlayer 20 -centroid 0 -volume 0 -area 0 -colors { CYAN4 DARKOLIVEGREEN1 DARKSLATEGRAY1 GAINSBORO LIGHTSLATEBLUE MATRAGRAY MEDIUMSPRINGGREEN PURPLE PURPLE SKYBLUE1 SKYBLUE1 SPRINGGREEN2 SPRINGGREEN4 STEELBLUE VIOLET } -nbcolors 15 -layers { "072498_01A|MODEL" "072498_01B|MODEL" "082499_03|MODEL" "Optics Housing|MODEL" "LE Diode|Model" "Phototransistor|Model" "082399_04A|MODEL" "082399_04B|MODEL" "082399_07|MODEL" "082399_05|MODEL" "082399_03|MODEL" "082699_01|MODEL" "082599_02|Model" "082399_02|Model" "082399_06|MODEL" "082599_03A|Model" "082599_03B|Model" } -nblayers 17
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 20 -shell 20 -face 1441 -shape 9567
+checkstatshape res_1 -solid 40 -shell 40 -face 2036 -freewire 0 -freeedge 0 -sharededge 3936
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.004932484407 -avg 2.77391027e-005]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 98 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 57 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 41 -n1 50 -n2 0 -total 91 -withname 91 -withcolor 20 -withlayer 20 -centroid 0 -volume 0 -area 0 -nbcolors 15 -nblayers 17
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 41 -n1 50 -n2 0 -total 91 -withname 91 -withcolor 20 -withlayer 20 -centroid 0 -volume 0 -area 0 -colors { CYAN4 DARKOLIVEGREEN1 DARKSLATEGRAY1 GAINSBORO LIGHTSLATEBLUE MATRAGRAY MEDIUMSPRINGGREEN PURPLE PURPLE SKYBLUE1 SKYBLUE1 SPRINGGREEN2 SPRINGGREEN4 STEELBLUE VIOLET } -nbcolors 15 -layers { "072498_01A|MODEL" "072498_01B|MODEL" "082499_03|MODEL" "Optics_Housing|MODEL" "LE_Diode|Model" "Phototransistor|Model" "082399_04A|MODEL" "082399_04B|MODEL" "082399_07|MODEL" "082399_05|MODEL" "082399_03|MODEL" "082699_01|MODEL" "082599_02|Model" "082399_02|Model" "082399_06|MODEL" "082599_03A|Model" "082599_03B|Model" } -nblayers 17
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 20 -shell 20 -face 1441 -shape 9567 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 40 -shell 40 -face 2036 -freewire 0 -freeedge 0 -sharededge 3936 -max_solid 40 -max_shell 40 -max_face 2036 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.004932484407 -avg 2.75392155e-005 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
-
set filename trj3_pm1-pe-203.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 2 ( 0 ) Summary = 2 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 22 ( 22 ) Shell = 22 ( 22 ) Face = 1355 ( 1355 ) Summary = 9094 ( 9094 )
-STATSHAPE : Solid = 24 ( 24 ) Shell = 24 ( 24 ) Face = 1388 ( 1388 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 3746 ( 3746 )
-TOLERANCE : MaxTol = 0.001976478297 ( 0.01468477155 ) AvgTol = 1.143821627e-005 ( 6.778351767e-005 )
-LABELS : N0Labels = 21 ( 21 ) N1Labels = 22 ( 22 ) N2Labels = 0 ( 0 ) TotalLabels = 43 ( 43 ) NameLabels = 43 ( 43 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 21 -n1 22 -n2 0 -total 43 -withname 43 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 22 -shell 22 -face 1355 -shape 9094
+checkstatshape res_1 -solid 24 -shell 24 -face 1388 -freewire 0 -freeedge 0 -sharededge 3746
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.01468477155 -avg 6.778351767e-005]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 2 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 21 -n1 22 -n2 0 -total 43 -withname 43 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 21 -n1 22 -n2 0 -total 43 -withname 43 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 22 -shell 22 -face 1355 -shape 9094 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 24 -shell 24 -face 1388 -freewire 0 -freeedge 0 -sharededge 3746 -max_solid 24 -max_shell 24 -max_face 1388 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.001976478297 -avg 1.143821627e-005 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj4_pm2-ec-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 4 ( 20 ) Summary = 4 ( 20 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 13 ( 13 ) Shell = 13 ( 13 ) Face = 801 ( 801 ) Summary = 4580 ( 4580 )
-STATSHAPE : Solid = 32 ( 32 ) Shell = 32 ( 32 ) Face = 840 ( 840 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 1833 ( 1833 )
-TOLERANCE : MaxTol = 0.000994818338 ( 0.001450971274 ) AvgTol = 8.127480807e-006 ( 2.899963831e-005 )
-LABELS : N0Labels = 21 ( 21 ) N1Labels = 39 ( 39 ) N2Labels = 0 ( 0 ) TotalLabels = 60 ( 60 ) NameLabels = 60 ( 60 ) ColorLabels = 13 ( 13 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 21 ( 21 ) Volume = 21 ( 21 ) Area = 21 ( 21 )
-NCOLORS : NColors = 7 ( 7 )
-COLORS : Colors = GRAY20 GRAY80 GREEN GREENYELLOW PURPLE STEELBLUE YELLOW ( GRAY20 GRAY80 GREEN GREENYELLOW PURPLE STEELBLUE YELLOW )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 22 -max_faults 0
+checkxstat D_First -n0 21 -n1 39 -n2 0 -total 60 -withname 60 -withcolor 13 -withlayer 0 -centroid 21 -volume 21 -area 21 -colors { GRAY20 GRAY80 GREEN GREENYELLOW PURPLE STEELBLUE YELLOW } -nbcolors 7 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 13 -shell 13 -face 801 -shape 4580
+checkstatshape res_1 -solid 32 -shell 32 -face 840 -freewire 0 -freeedge 0 -sharededge 1833
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.001450971274 -avg 2.899963831e-005]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 22 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 21 -n1 39 -n2 0 -total 60 -withname 60 -withcolor 13 -withlayer 0 -centroid 21 -volume 21 -area 21 -nbcolors 7 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 21 -n1 39 -n2 0 -total 60 -withname 60 -withcolor 13 -withlayer 0 -centroid 21 -volume 21 -area 21 -colors { GRAY20 GRAY80 GREEN GREENYELLOW PURPLE STEELBLUE YELLOW } -nbcolors 7 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 13 -shell 13 -face 801 -shape 4580 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 32 -shell 32 -face 840 -freewire 0 -freeedge 0 -sharededge 1833 -max_solid 32 -max_shell 32 -max_face 840 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.000994818338 -avg 8.127480807e-006 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj4_pm2-pe2-203.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 2 ( 23 ) Summary = 2 ( 23 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 5 ( 5 ) Face = 784 ( 784 ) Summary = 4701 ( 4701 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 5 ( 5 ) Face = 784 ( 784 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 1925 ( 1925 )
-TOLERANCE : MaxTol = 0.02086436459 ( 0.02261143715 ) AvgTol = 0.003291519582 ( 0.004212332857 )
-LABELS : N0Labels = 3 ( 3 ) N1Labels = 2 ( 2 ) N2Labels = 0 ( 0 ) TotalLabels = 5 ( 5 ) NameLabels = 5 ( 5 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 25 -max_faults 0
+checkxstat D_First -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 5 -face 784 -shape 4701
+checkstatshape res_1 -solid 1 -shell 5 -face 784 -freewire 0 -freeedge 0 -sharededge 1925
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.02261143715 -avg 0.004212332857]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 25 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 2 -n2 0 -total 5 -withname 5 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 5 -face 784 -shape 4701 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 5 -face 784 -freewire 0 -freeedge 0 -sharededge 1925 -max_solid 1 -max_shell 5 -max_face 784 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.02086436459 -avg 0.003291519582 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
-
set filename trj5_pm3-db-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 314 ( 268 ) Summary = 314 ( 268 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 2 ( 2 ) Shell = 2 ( 2 ) Face = 318 ( 318 ) Summary = 1823 ( 1823 )
-STATSHAPE : Solid = 2 ( 2 ) Shell = 2 ( 2 ) Face = 318 ( 318 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 732 ( 732 )
-TOLERANCE : MaxTol = 0.002724429926 ( 0.002724429936 ) AvgTol = 0.0001682038323 ( 0.0002576266755 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 2 ( 2 ) N2Labels = 0 ( 0 ) TotalLabels = 3 ( 3 ) NameLabels = 1 ( 1 ) ColorLabels = 2 ( 2 ) LayerLabels = 2 ( 2 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = YELLOW3 ( YELLOW3 )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 2 ( { 2} )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 268 -max_faults 0
+checkxstat D_First -n0 1 -n1 2 -n2 0 -total 3 -withname 1 -withcolor 2 -withlayer 2 -centroid 0 -volume 0 -area 0 -colors { YELLOW3 } -nbcolors 1 -layers { " 2" } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 2 -shell 2 -face 318 -shape 1823
+checkstatshape res_1 -solid 2 -shell 2 -face 318 -freewire 0 -freeedge 0 -sharededge 732
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.002724429936 -avg 0.0002576266755]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 268 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 314 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 2 -n2 0 -total 3 -withname 1 -withcolor 2 -withlayer 2 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 2 -n2 0 -total 3 -withname 1 -withcolor 2 -withlayer 2 -centroid 0 -volume 0 -area 0 -colors { YELLOW3 } -nbcolors 1 -layers { 2 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 2 -shell 2 -face 318 -shape 1823 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 2 -shell 2 -face 318 -freewire 0 -freeedge 0 -sharededge 732 -max_solid 2 -max_shell 2 -max_face 318 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.002724429926 -avg 0.0001682038323 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
-
set filename trj5_pm3-pe-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 29 ( 0 ) Summary = 29 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 599 ( 599 ) Summary = 3807 ( 3807 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 599 ( 599 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 1570 ( 1570 )
-TOLERANCE : MaxTol = 0.06047362453 ( 0.09420298458 ) AvgTol = 0.004157765445 ( 0.006770439496 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 17 ( 17 ) N2Labels = 0 ( 0 ) TotalLabels = 18 ( 18 ) NameLabels = 1 ( 1 ) ColorLabels = 18 ( 18 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 1 ( 1 ) Volume = 1 ( 1 ) Area = 1 ( 1 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = BLUE1 PALETURQUOISE2 ( BLUE1 PALETURQUOISE2 )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 1 -n1 17 -n2 0 -total 18 -withname 1 -withcolor 18 -withlayer 0 -centroid 1 -volume 1 -area 1 -colors { BLUE1 PALETURQUOISE2 } -nbcolors 2 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 599 -shape 3807
+checkstatshape res_1 -solid 1 -shell 1 -face 599 -freewire 0 -freeedge 0 -sharededge 1570
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.09420298458 -avg 0.006770439496]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 27 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 17 -n2 0 -total 18 -withname 1 -withcolor 18 -withlayer 0 -centroid 1 -volume 1 -area 1 -nbcolors 2 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 17 -n2 0 -total 18 -withname 1 -withcolor 18 -withlayer 0 -centroid 1 -volume 1 -area 1 -colors { BLUE1 PALETURQUOISE2 } -nbcolors 2 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 599 -shape 3807 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 599 -freewire 0 -freeedge 0 -sharededge 1570 -max_solid 1 -max_shell 1 -max_face 599 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.06047362453 -avg 0.004157765445 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj6_b1-hc-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 74 ) Warnings = 0 ( 0 ) Summary = 0 ( 74 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 14 ) Summary = 0 ( 14 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 265 ( 265 ) Summary = 1552 ( 1552 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 265 ( 265 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 642 ( 642 )
-TOLERANCE : MaxTol = 0.006613321445 ( 0.006613387574 ) AvgTol = 0.0003157957339 ( 0.0003790149885 )
-LABELS : N0Labels = 2 ( 2 ) N1Labels = 266 ( 266 ) N2Labels = 0 ( 0 ) TotalLabels = 268 ( 268 ) NameLabels = 3 ( 3 ) ColorLabels = 265 ( 265 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = WHITE ( WHITE )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 222 -max_faults 74
+checkdoc "tpstat c" -max_warns 14 -max_faults 0
+checkxstat D_First -n0 2 -n1 266 -n2 0 -total 268 -withname 3 -withcolor 265 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 265 -shape 1552
+checkstatshape res_1 -solid 1 -shell 1 -face 265 -freewire 0 -freeedge 0 -sharededge 642
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.006613387574 -avg 0.0003790149885]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 222 -max_faults 74
+checkdoc "tpstat c" -max_warns 14 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 2 -n1 266 -n2 0 -total 268 -withname 3 -withcolor 265 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 2 -n1 266 -n2 0 -total 268 -withname 3 -withcolor 265 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 265 -shape 1552 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 265 -freewire 0 -freeedge 0 -sharededge 642 -max_solid 1 -max_shell 1 -max_face 265 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.006613321445 -avg 0.0003157957339 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
-
set filename trj6_b1-sd-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 8 ( 0 ) Summary = 8 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 343 ( 343 ) Summary = 2042 ( 2042 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 343 ( 343 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 865 ( 865 )
-TOLERANCE : MaxTol = 7.625392261e-007 ( 7.625403546e-007 ) AvgTol = 2.087070625e-007 ( 2.087070074e-007 )
-LABELS : N0Labels = 2 ( 2 ) N1Labels = 1 ( 1 ) N2Labels = 0 ( 0 ) TotalLabels = 3 ( 3 ) NameLabels = 3 ( 3 ) ColorLabels = 1 ( 1 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = MATRAGRAY ( MATRAGRAY )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 2 -n1 1 -n2 0 -total 3 -withname 3 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { MATRAGRAY } -nbcolors 1 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 343 -shape 2042
+checkstatshape res_1 -solid 1 -shell 1 -face 343 -freewire 0 -freeedge 0 -sharededge 865
+set max_tol_res_1 [checkmaxtol res_1 -tol 7.625403546e-007 -avg 2.087070074e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 8 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 2 -n1 1 -n2 0 -total 3 -withname 3 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 2 -n1 1 -n2 0 -total 3 -withname 3 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { MATRAGRAY } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 343 -shape 2042 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 343 -freewire 0 -freeedge 0 -sharededge 865 -max_solid 1 -max_shell 1 -max_face 343 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 7.625392261e-007 -avg 2.087070625e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj7_b1-ac-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 146 ( 164 ) Summary = 146 ( 164 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 500 ( 500 ) Summary = 3324 ( 3230 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 500 ( 500 ) FreeWire = 0 ( 0 ) FreeEdge = 94 ( 94 ) SharedEdge = 1327 ( 1327 )
-TOLERANCE : MaxTol = 0.007482480837 ( 0.007482835673 ) AvgTol = 0.0004883286474 ( 0.0004975892507 )
-LABELS : N0Labels = 3 ( 3 ) N1Labels = 96 ( 96 ) N2Labels = 0 ( 0 ) TotalLabels = 99 ( 99 ) NameLabels = 5 ( 5 ) ColorLabels = 95 ( 95 ) LayerLabels = 95 ( 95 )
-PROPS : Centroid = 2 ( 2 ) Volume = 2 ( 2 ) Area = 2 ( 2 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = DARKORANGE1 RED ( DARKORANGE1 RED )
-NLAYERS : NLayers = 3 ( 3 )
-LAYERS : Layers = 0 AMV_17_HATCH AMV_18_HATCH ( 0 AMV_17_HATCH AMV_18_HATCH )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 164 -max_faults 0
+checkxstat D_First -n0 3 -n1 96 -n2 0 -total 99 -withname 5 -withcolor 95 -withlayer 95 -centroid 2 -volume 2 -area 2 -colors { DARKORANGE1 RED } -nbcolors 2 -layers { "0" "AMV_18_HATCH" "AMV_17_HATCH" } -nblayers 3
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 500 -shape 3230
+checkstatshape res_1 -solid 1 -shell 1 -face 500 -freewire 0 -freeedge 94 -sharededge 1327
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.007482835673 -avg 0.0004975892507]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 164 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 146 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3 -n1 96 -n2 0 -total 99 -withname 5 -withcolor 95 -withlayer 95 -centroid 2 -volume 2 -area 2 -nbcolors 2 -nblayers 3
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 96 -n2 0 -total 99 -withname 5 -withcolor 95 -withlayer 95 -centroid 2 -volume 2 -area 2 -colors { DARKORANGE1 RED } -nbcolors 2 -layers { "0" "AMV_18_HATCH" "AMV_17_HATCH" } -nblayers 3
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 500 -shape 3324 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 500 -freewire 0 -freeedge 94 -sharededge 1327 -max_solid 1 -max_shell 1 -max_face 500 -max_freewire 0 -max_freeedge 94
+checkmaxtol res_2 -tol 0.007482480837 -avg 0.0004883286474 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj7_b1-hc-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 74 ) Warnings = 0 ( 0 ) Summary = 0 ( 74 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 13 ) Summary = 0 ( 13 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 265 ( 265 ) Summary = 1552 ( 1552 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 265 ( 265 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 642 ( 642 )
-TOLERANCE : MaxTol = 0.006613321442 ( 0.006613387576 ) AvgTol = 0.0003137797984 ( 0.0003518496817 )
-LABELS : N0Labels = 2 ( 2 ) N1Labels = 266 ( 266 ) N2Labels = 0 ( 0 ) TotalLabels = 268 ( 268 ) NameLabels = 3 ( 3 ) ColorLabels = 266 ( 266 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 2 ( 2 ) Volume = 2 ( 2 ) Area = 2 ( 2 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = LAVENDER STEELBLUE3 ( LAVENDER STEELBLUE3 )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 222 -max_faults 74
+checkdoc "tpstat c" -max_warns 16 -max_faults 0
+checkxstat D_First -n0 2 -n1 266 -n2 0 -total 268 -withname 3 -withcolor 266 -withlayer 0 -centroid 2 -volume 2 -area 2 -colors { LAVENDER STEELBLUE3 } -nbcolors 2 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 265 -shape 1552
+checkstatshape res_1 -solid 1 -shell 1 -face 265 -freewire 0 -freeedge 0 -sharededge 642
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.006613387576 -avg 0.0003518496817]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 222 -max_faults 74
+checkdoc "tpstat c" -max_warns 16 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 2 -n1 266 -n2 0 -total 268 -withname 3 -withcolor 266 -withlayer 0 -centroid 2 -volume 2 -area 2 -nbcolors 2 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 2 -n1 266 -n2 0 -total 268 -withname 3 -withcolor 266 -withlayer 0 -centroid 2 -volume 2 -area 2 -colors { LAVENDER STEELBLUE3 } -nbcolors 2 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 265 -shape 1552 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 265 -freewire 0 -freeedge 0 -sharededge 642 -max_solid 1 -max_shell 1 -max_face 265 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.006613321442 -avg 0.0003137797984 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
-
set filename trj7_b1-sd-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 8 ( 0 ) Summary = 8 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 343 ( 343 ) Summary = 2042 ( 2042 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 343 ( 343 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 865 ( 865 )
-TOLERANCE : MaxTol = 7.625392261e-007 ( 7.625403546e-007 ) AvgTol = 2.087070625e-007 ( 2.087070074e-007 )
-LABELS : N0Labels = 2 ( 2 ) N1Labels = 1 ( 1 ) N2Labels = 0 ( 0 ) TotalLabels = 3 ( 3 ) NameLabels = 3 ( 3 ) ColorLabels = 1 ( 1 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = MATRAGRAY ( MATRAGRAY )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 2 -n1 1 -n2 0 -total 3 -withname 3 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { MATRAGRAY } -nbcolors 1 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 343 -shape 2042
+checkstatshape res_1 -solid 1 -shell 1 -face 343 -freewire 0 -freeedge 0 -sharededge 865
+set max_tol_res_1 [checkmaxtol res_1 -tol 7.625403546e-007 -avg 2.087070074e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 8 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 2 -n1 1 -n2 0 -total 3 -withname 3 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 2 -n1 1 -n2 0 -total 3 -withname 3 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { MATRAGRAY } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 343 -shape 2042 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 343 -freewire 0 -freeedge 0 -sharededge 865 -max_solid 1 -max_shell 1 -max_face 343 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 7.625392261e-007 -avg 2.087070625e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj8_b1-ac-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 146 ( 164 ) Summary = 146 ( 164 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 500 ( 500 ) Summary = 3324 ( 3230 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 500 ( 500 ) FreeWire = 0 ( 0 ) FreeEdge = 94 ( 94 ) SharedEdge = 1327 ( 1327 )
-TOLERANCE : MaxTol = 0.007482480837 ( 0.007482835673 ) AvgTol = 0.0004883286474 ( 0.0004975892507 )
-LABELS : N0Labels = 3 ( 3 ) N1Labels = 96 ( 96 ) N2Labels = 0 ( 0 ) TotalLabels = 99 ( 99 ) NameLabels = 5 ( 5 ) ColorLabels = 95 ( 95 ) LayerLabels = 95 ( 95 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = DARKORANGE1 RED ( DARKORANGE1 RED )
-NLAYERS : NLayers = 3 ( 3 )
-LAYERS : Layers = 0 AMV_17_HATCH AMV_18_HATCH ( 0 AMV_17_HATCH AMV_18_HATCH )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 164 -max_faults 0
+checkxstat D_First -n0 3 -n1 96 -n2 0 -total 99 -withname 5 -withcolor 95 -withlayer 95 -centroid 0 -volume 0 -area 0 -colors { DARKORANGE1 RED } -nbcolors 2 -layers { "0" "AMV_18_HATCH" "AMV_17_HATCH" } -nblayers 3
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 500 -shape 3230
+checkstatshape res_1 -solid 1 -shell 1 -face 500 -freewire 0 -freeedge 94 -sharededge 1327
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.007482835673 -avg 0.0004975892507]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 164 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 146 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3 -n1 96 -n2 0 -total 99 -withname 5 -withcolor 95 -withlayer 95 -centroid 0 -volume 0 -area 0 -nbcolors 2 -nblayers 3
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 96 -n2 0 -total 99 -withname 5 -withcolor 95 -withlayer 95 -centroid 0 -volume 0 -area 0 -colors { DARKORANGE1 RED } -nbcolors 2 -layers { "0" "AMV_18_HATCH" "AMV_17_HATCH" } -nblayers 3
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 500 -shape 3324 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 500 -freewire 0 -freeedge 94 -sharededge 1327 -max_solid 1 -max_shell 1 -max_face 500 -max_freewire 0 -max_freeedge 94
+checkmaxtol res_2 -tol 0.007482480837 -avg 0.0004883286474 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj8_b1-hc-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 74 ) Warnings = 0 ( 0 ) Summary = 0 ( 74 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 0 ( 13 ) Summary = 0 ( 13 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 265 ( 265 ) Summary = 1552 ( 1552 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 265 ( 265 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 642 ( 642 )
-TOLERANCE : MaxTol = 0.006613321442 ( 0.006613387576 ) AvgTol = 0.0002978527574 ( 0.000335922641 )
-LABELS : N0Labels = 2 ( 2 ) N1Labels = 266 ( 266 ) N2Labels = 0 ( 0 ) TotalLabels = 268 ( 268 ) NameLabels = 3 ( 3 ) ColorLabels = 266 ( 266 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 2 ( 2 ) Volume = 2 ( 2 ) Area = 2 ( 2 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = LAVENDER STEELBLUE3 ( LAVENDER STEELBLUE3 )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 222 -max_faults 74
+checkdoc "tpstat c" -max_warns 16 -max_faults 0
+checkxstat D_First -n0 2 -n1 266 -n2 0 -total 268 -withname 3 -withcolor 266 -withlayer 0 -centroid 2 -volume 2 -area 2 -colors { LAVENDER STEELBLUE3 } -nbcolors 2 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 265 -shape 1552
+checkstatshape res_1 -solid 1 -shell 1 -face 265 -freewire 0 -freeedge 0 -sharededge 642
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.006613387576 -avg 0.000335922641]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 222 -max_faults 74
+checkdoc "tpstat c" -max_warns 16 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 2 -n1 266 -n2 0 -total 268 -withname 3 -withcolor 266 -withlayer 0 -centroid 2 -volume 2 -area 2 -nbcolors 2 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 2 -n1 266 -n2 0 -total 268 -withname 3 -withcolor 266 -withlayer 0 -centroid 2 -volume 2 -area 2 -colors { LAVENDER STEELBLUE3 } -nbcolors 2 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 265 -shape 1552 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 265 -freewire 0 -freeedge 0 -sharededge 642 -max_solid 1 -max_shell 1 -max_face 265 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.006613321442 -avg 0.0002978527574 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj8_pm6-sh-203.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 8 ( 66 ) Summary = 8 ( 66 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 332 ( 332 ) Summary = 2249 ( 2249 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 332 ( 332 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 949 ( 949 )
-TOLERANCE : MaxTol = 0.05000100001 ( 0.05000100001 ) AvgTol = 0.0001917756714 ( 0.0001918988795 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 66 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 332 -shape 2249
+checkstatshape res_1 -solid 1 -shell 1 -face 332 -freewire 0 -freeedge 0 -sharededge 949
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.05000100001 -avg 0.0001918988795]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 66 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 8 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 332 -shape 2249 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 332 -freewire 0 -freeedge 0 -sharededge 949 -max_solid 1 -max_shell 1 -max_face 332 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.05000100001 -avg 0.0001917756714 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename ug_exhaust-A.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 1 ( 28 ) Summary = 1 ( 28 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 5 ( 5 ) Shell = 5 ( 5 ) Face = 116 ( 116 ) Summary = 595 ( 595 )
-STATSHAPE : Solid = 5 ( 5 ) Shell = 5 ( 5 ) Face = 116 ( 116 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 224 ( 224 )
-TOLERANCE : MaxTol = 0.003174825282 ( 0.008013510512 ) AvgTol = 0.0008311294237 ( 0.001823513991 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 5 ( 5 ) N2Labels = 0 ( 0 ) TotalLabels = 6 ( 6 ) NameLabels = 1 ( 1 ) ColorLabels = 5 ( 5 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = BLUE1 RED4 ( BLUE1 RED4 )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 28 -max_faults 0
+checkxstat D_First -n0 1 -n1 5 -n2 0 -total 6 -withname 1 -withcolor 5 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 RED4 } -nbcolors 2 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 5 -shell 5 -face 116 -shape 595
+checkstatshape res_1 -solid 5 -shell 5 -face 116 -freewire 0 -freeedge 0 -sharededge 224
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.008013510512 -avg 0.001823513991]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 28 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 5 -n2 0 -total 6 -withname 1 -withcolor 5 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 2 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 5 -n2 0 -total 6 -withname 1 -withcolor 5 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 RED4 } -nbcolors 2 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 5 -shell 5 -face 116 -shape 595 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 5 -shell 5 -face 116 -freewire 0 -freeedge 0 -sharededge 224 -max_solid 5 -max_shell 5 -max_face 116 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.003174825282 -avg 0.0008311294237 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename ug_exhaust-B.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 1 ( 28 ) Summary = 1 ( 28 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 5 ( 5 ) Shell = 5 ( 5 ) Face = 116 ( 116 ) Summary = 595 ( 595 )
-STATSHAPE : Solid = 5 ( 5 ) Shell = 5 ( 5 ) Face = 116 ( 116 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 224 ( 224 )
-TOLERANCE : MaxTol = 0.001062703295 ( 0.003953957958 ) AvgTol = 0.0002444882442 ( 0.0005511075925 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 5 ( 5 ) N2Labels = 0 ( 0 ) TotalLabels = 6 ( 6 ) NameLabels = 1 ( 1 ) ColorLabels = 5 ( 5 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = BLUE1 RED4 ( BLUE1 RED4 )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 28 -max_faults 0
+checkxstat D_First -n0 1 -n1 5 -n2 0 -total 6 -withname 1 -withcolor 5 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 RED4 } -nbcolors 2 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 5 -shell 5 -face 116 -shape 595
+checkstatshape res_1 -solid 5 -shell 5 -face 116 -freewire 0 -freeedge 0 -sharededge 224
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.003953957958 -avg 0.0005511075925]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 28 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 5 -n2 0 -total 6 -withname 1 -withcolor 5 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 2 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 5 -n2 0 -total 6 -withname 1 -withcolor 5 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 RED4 } -nbcolors 2 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 5 -shell 5 -face 116 -shape 595 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 5 -shell 5 -face 116 -freewire 0 -freeedge 0 -sharededge 224 -max_solid 5 -max_shell 5 -max_face 116 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.001062703295 -avg 0.0002444882442 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
-
set filename vorstufe_solid.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 58 ( 27 ) Summary = 58 ( 27 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 7 ( 7 ) Shell = 7 ( 7 ) Face = 780 ( 780 ) Summary = 4769 ( 4769 )
-STATSHAPE : Solid = 21 ( 21 ) Shell = 21 ( 21 ) Face = 920 ( 920 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 1970 ( 1970 )
-TOLERANCE : MaxTol = 0.01997667502 ( 0.04427257303 ) AvgTol = 0.001806728967 ( 0.006835266532 )
-LABELS : N0Labels = 9 ( 9 ) N1Labels = 22 ( 22 ) N2Labels = 0 ( 0 ) TotalLabels = 31 ( 31 ) NameLabels = 31 ( 31 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 27 -max_faults 0
+checkxstat D_First -n0 9 -n1 22 -n2 0 -total 31 -withname 31 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 7 -shell 7 -face 780 -shape 4769
+checkstatshape res_1 -solid 21 -shell 21 -face 920 -freewire 0 -freeedge 0 -sharededge 1970
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.04427257303 -avg 0.006835266532]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 27 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 45 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 9 -n1 22 -n2 0 -total 31 -withname 31 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 9 -n1 22 -n2 0 -total 31 -withname 31 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 7 -shell 7 -face 780 -shape 4769 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 21 -shell 21 -face 920 -freewire 0 -freeedge 0 -sharededge 1970 -max_solid 21 -max_shell 21 -max_face 920 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.01997667502 -avg 0.001806728967 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename BUC61003-3.stp
-set ref_data {
-DATA : Faulties = 0 ( 408 ) Warnings = 0 ( 1209 ) Summary = 0 ( 1617 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 108 ( 168 ) Summary = 108 ( 168 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 34 ( 34 ) Shell = 34 ( 34 ) Face = 3882 ( 3882 ) Summary = 23997 ( 23997 )
-STATSHAPE : Solid = 34 ( 34 ) Shell = 34 ( 34 ) Face = 3882 ( 3882 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 10010 ( 10010 )
-TOLERANCE : MaxTol = 0.2091571291 ( 0.2091571291 ) AvgTol = 0.0003467072965 ( 0.0003470323426 )
-LABELS : N0Labels = 35 ( 35 ) N1Labels = 34 ( 34 ) N2Labels = 0 ( 0 ) TotalLabels = 69 ( 69 ) NameLabels = 69 ( 69 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 1209 -max_faults 408
+checkdoc "tpstat c" -max_warns 168 -max_faults 0
+checkxstat D_First -n0 35 -n1 34 -n2 0 -total 69 -withname 69 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 34 -shell 34 -face 3882 -shape 23997
+checkstatshape res_1 -solid 34 -shell 34 -face 3882 -freewire 0 -freeedge 0 -sharededge 10010
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.2091571291 -avg 0.0003470323426]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 1209 -max_faults 408
+checkdoc "tpstat c" -max_warns 168 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 108 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 35 -n1 34 -n2 0 -total 69 -withname 69 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 35 -n1 34 -n2 0 -total 69 -withname 69 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 34 -shell 34 -face 3882 -shape 23997 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 34 -shell 34 -face 3882 -freewire 0 -freeedge 0 -sharededge 10010 -max_solid 34 -max_shell 34 -max_face 3882 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.2091571291 -avg 0.0003467072965 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: CHECKSHAPE : Faulty"
puts "TODO CR23096 ALL: TOLERANCE : Faulty"
-set LinuxDiff 2
set filename BUC61004.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 5 ( 43 ) Summary = 5 ( 43 )
-CHECKSHAPE : Wires = 1 ( 0 ) Faces = 1 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 2523 ( 2523 ) Summary = 16185 ( 16185 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 2523 ( 2523 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 6806 ( 6806 )
-TOLERANCE : MaxTol = 9.829787663 ( 7.812889886 ) AvgTol = 0.01764242132 ( 0.01681498017 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 24851 -max_faults 0
+checkdoc "tpstat c" -max_warns 43 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 2523 -shape 16185
+checkstatshape res_1 -solid 1 -shell 1 -face 2523 -freewire 0 -freeedge 0 -sharededge 6806
+set max_tol_res_1 [checkmaxtol res_1 -tol 7.812889886 -avg 0.01681498017]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 24851 -max_faults 0
+checkdoc "tpstat c" -max_warns 43 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 5 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 1 -max_faces 1 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 2523 -shape 16185 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 2523 -freewire 0 -freeedge 0 -sharededge 6806 -max_solid 1 -max_shell 1 -max_face 2523 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 9.829787663 -avg 0.01764242132 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
-
set filename bm4_sd_seal_b.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 146 ( 11 ) Summary = 146 ( 11 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 3 ( 3 ) Face = 540 ( 540 ) Summary = 2968 ( 2968 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 3 ( 3 ) Face = 540 ( 540 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 1202 ( 1202 )
-TOLERANCE : MaxTol = 6.82509241e-006 ( 0.0002065359589 ) AvgTol = 8.53535451e-007 ( 7.209454306e-006 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = MATRAGRAY ( MATRAGRAY )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 11 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { MATRAGRAY } -nbcolors 1 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 3 -face 540 -shape 2968
+checkstatshape res_1 -solid 1 -shell 3 -face 540 -freewire 0 -freeedge 0 -sharededge 1202
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.0002065359589 -avg 7.209454306e-006]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 11 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 6 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { MATRAGRAY } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 3 -face 540 -shape 2968 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 3 -face 540 -freewire 0 -freeedge 0 -sharededge 1202 -max_solid 1 -max_shell 3 -max_face 540 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 6.82509241e-006 -avg 8.53535451e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
-
set filename bm4_sd_seal_d.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 5 ( 4 ) Summary = 5 ( 4 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 3 ( 3 ) Face = 540 ( 540 ) Summary = 2968 ( 2968 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 3 ( 3 ) Face = 540 ( 540 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 1202 ( 1202 )
-TOLERANCE : MaxTol = 0.0002065359574 ( 0.001945620246 ) AvgTol = 7.932735753e-006 ( 0.0001377113463 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = MATRAGRAY ( MATRAGRAY )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { MATRAGRAY } -nbcolors 1 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 3 -face 540 -shape 2968
+checkstatshape res_1 -solid 1 -shell 3 -face 540 -freewire 0 -freeedge 0 -sharededge 1202
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.001945620246 -avg 0.0001377113463]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 5 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { MATRAGRAY } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 3 -face 540 -shape 2968 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 3 -face 540 -freewire 0 -freeedge 0 -sharededge 1202 -max_solid 1 -max_shell 3 -max_face 540 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.0002065359574 -avg 7.932735753e-006 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: CHECKSHAPE : Faulty"
-
set filename Inventor_Engine.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 448 ( 560 ) Summary = 448 ( 560 )
-CHECKSHAPE : Wires = 9 ( 6 ) Faces = 9 ( 6 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 47 ( 47 ) Shell = 47 ( 47 ) Face = 4455 ( 4455 ) Summary = 27804 ( 27803 )
-STATSHAPE : Solid = 80 ( 80 ) Shell = 80 ( 80 ) Face = 5359 ( 5359 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 11467 ( 11467 )
-TOLERANCE : MaxTol = 2.429208989 ( 2.450580634 ) AvgTol = 0.003235414897 ( 0.002917423634 )
-LABELS : N0Labels = 52 ( 52 ) N1Labels = 86 ( 86 ) N2Labels = 0 ( 0 ) TotalLabels = 138 ( 138 ) NameLabels = 136 ( 136 ) ColorLabels = 47 ( 47 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 11 ( 11 )
-COLORS : Colors = BISQUE3 DODGERBLUE2 GOLDENROD4 GRAY GRAY32 GRAY41 GRAY50 GRAY97 IVORY SLATEGRAY3 WHITE ( BISQUE3 DODGERBLUE2 GOLDENROD4 GRAY GRAY32 GRAY41 GRAY50 GRAY97 IVORY SLATEGRAY3 WHITE )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 561 -max_faults 0
+checkxstat D_First -n0 52 -n1 86 -n2 0 -total 138 -withname 136 -withcolor 47 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BISQUE3 DODGERBLUE2 GOLDENROD4 GRAY GRAY32 GRAY41 GRAY50 GRAY97 IVORY SLATEGRAY3 WHITE } -nbcolors 11 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 6 -max_faces 6 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 47 -shell 47 -face 4455 -shape 27803
+checkstatshape res_1 -solid 80 -shell 80 -face 5359 -freewire 0 -freeedge 0 -sharededge 11467
+set max_tol_res_1 [checkmaxtol res_1 -tol 2.450580634 -avg 0.002917423634]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 561 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 455 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 52 -n1 86 -n2 0 -total 138 -withname 136 -withcolor 47 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 11 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 52 -n1 86 -n2 0 -total 138 -withname 136 -withcolor 47 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BISQUE3 DODGERBLUE2 GOLDENROD4 GRAY GRAY32 GRAY41 GRAY50 GRAY97 IVORY SLATEGRAY3 WHITE } -nbcolors 11 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 6 -max_faces 6 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 9 -max_faces 9 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 47 -shell 47 -face 4455 -shape 27804 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 80 -shell 80 -face 5359 -freewire 0 -freeedge 0 -sharededge 11467 -max_solid 80 -max_shell 80 -max_face 5359 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 2.429208989 -avg 0.003235414897 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj10_pm8-ac-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 117 ( 120 ) Summary = 117 ( 120 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 25 ( 25 ) Shell = 25 ( 25 ) Face = 2995 ( 2995 ) Summary = 19246 ( 19240 )
-STATSHAPE : Solid = 41 ( 41 ) Shell = 41 ( 41 ) Face = 4431 ( 4431 ) FreeWire = 0 ( 0 ) FreeEdge = 12 ( 12 ) SharedEdge = 8025 ( 8025 )
-TOLERANCE : MaxTol = 0.009679269696 ( 0.009679269696 ) AvgTol = 1.720173689e-005 ( 1.724163883e-005 )
-LABELS : N0Labels = 55 ( 55 ) N1Labels = 76 ( 76 ) N2Labels = 0 ( 0 ) TotalLabels = 131 ( 131 ) NameLabels = 125 ( 125 ) ColorLabels = 31 ( 31 ) LayerLabels = 31 ( 31 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 21 ( 21 )
-COLORS : Colors = BLUE1 BURLYWOOD2 DARKGOLDENROD1 DARKGREEN DARKORANGE1 DARKSLATEBLUE DARKSLATEGRAY GRAY15 GRAY9 KHAKI4 KHAKI4 LIGHTGOLDENROD4 MAGENTA1 MATRABLUE MEDIUMPURPLE1 MEDIUMSPRINGGREEN ORANGE4 RED STEELBLUE TURQUOISE4 YELLOW ( BLUE1 BURLYWOOD2 DARKGOLDENROD1 DARKGREEN DARKORANGE1 DARKSLATEBLUE DARKSLATEGRAY GRAY15 GRAY9 KHAKI4 KHAKI4 LIGHTGOLDENROD4 MAGENTA1 MATRABLUE MEDIUMPURPLE1 MEDIUMSPRINGGREEN ORANGE4 RED STEELBLUE TURQUOISE4 YELLOW )
-NLAYERS : NLayers = 2 ( 2 )
-LAYERS : Layers = 0 Slider_Button|AMV_9_HATCH ( 0 Slider_Button|AMV_9_HATCH )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 120 -max_faults 0
+checkxstat D_First -n0 55 -n1 76 -n2 0 -total 131 -withname 125 -withcolor 31 -withlayer 31 -centroid 0 -volume 0 -area 0 -colors { BLUE1 BURLYWOOD2 DARKGOLDENROD1 DARKGREEN DARKORANGE1 DARKSLATEBLUE DARKSLATEGRAY GRAY15 GRAY9 KHAKI4 KHAKI4 LIGHTGOLDENROD4 MAGENTA1 MATRABLUE MEDIUMPURPLE1 MEDIUMSPRINGGREEN ORANGE4 RED STEELBLUE TURQUOISE4 YELLOW } -nbcolors 21 -layers { "0" "Slider_Button|AMV_9_HATCH" } -nblayers 2
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 25 -shell 25 -face 2995 -shape 19240
+checkstatshape res_1 -solid 41 -shell 41 -face 4431 -freewire 0 -freeedge 12 -sharededge 8025
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.009679269696 -avg 1.724163883e-005]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 120 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 117 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 55 -n1 76 -n2 0 -total 131 -withname 125 -withcolor 31 -withlayer 31 -centroid 0 -volume 0 -area 0 -nbcolors 21 -nblayers 2
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 55 -n1 76 -n2 0 -total 131 -withname 125 -withcolor 31 -withlayer 31 -centroid 0 -volume 0 -area 0 -colors { BLUE1 BURLYWOOD2 DARKGOLDENROD1 DARKGREEN DARKORANGE1 DARKSLATEBLUE DARKSLATEGRAY GRAY15 GRAY9 KHAKI4 KHAKI4 LIGHTGOLDENROD4 MAGENTA1 MATRABLUE MEDIUMPURPLE1 MEDIUMSPRINGGREEN ORANGE4 RED STEELBLUE TURQUOISE4 YELLOW } -nbcolors 21 -layers { "0" "Slider_Button|AMV_9_HATCH" } -nblayers 2
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 25 -shell 25 -face 2995 -shape 19246 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 41 -shell 41 -face 4431 -freewire 0 -freeedge 12 -sharededge 8025 -max_solid 41 -max_shell 41 -max_face 4431 -max_freewire 0 -max_freeedge 12
+checkmaxtol res_2 -tol 0.009679269696 -avg 1.720173689e-005 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj10_pm8-ct-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 2 ) Warnings = 0 ( 0 ) Summary = 0 ( 2 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 57 ( 113 ) Summary = 57 ( 113 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 528 ( 528 ) Summary = 3346 ( 3346 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 528 ( 528 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 1404 ( 1404 )
-TOLERANCE : MaxTol = 0.1201139499 ( 0.1201139499 ) AvgTol = 0.001743497401 ( 0.001912088277 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 1 ( 1 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = CYAN1 ( CYAN1 )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 4 ( 4 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 2
+checkdoc "tpstat c" -max_warns 116 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { CYAN1 } -nbcolors 1 -layers { 4 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 528 -shape 3346
+checkstatshape res_1 -solid 1 -shell 1 -face 528 -freewire 0 -freeedge 0 -sharededge 1404
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.1201139499 -avg 0.001912088277]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 2
+checkdoc "tpstat c" -max_warns 116 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 51 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { CYAN1 } -nbcolors 1 -layers { 4 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 528 -shape 3346 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 528 -freewire 0 -freeedge 0 -sharededge 1404 -max_solid 1 -max_shell 1 -max_face 528 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.1201139499 -avg 0.001743497401 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj10_pm8-id-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 34 ( 124 ) Summary = 34 ( 124 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 2256 ( 2256 ) Summary = 14108 ( 14108 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 2256 ( 2256 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 5915 ( 5915 )
-TOLERANCE : MaxTol = 0.2529794249 ( 0.2529794249 ) AvgTol = 0.0126158781 ( 0.01261497345 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 5366 ( 5366 ) N2Labels = 0 ( 0 ) TotalLabels = 5367 ( 5367 ) NameLabels = 1 ( 1 ) ColorLabels = 5367 ( 5367 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 1 ( 1 ) Volume = 1 ( 1 ) Area = 1 ( 1 )
-NCOLORS : NColors = 6 ( 6 )
-COLORS : Colors = DEEPSKYBLUE2 GREEN MAGENTA1 ORANGE ORANGERED RED ( DEEPSKYBLUE2 GREEN MAGENTA1 ORANGE ORANGERED RED )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 125 -max_faults 0
+checkxstat D_First -n0 1 -n1 5366 -n2 0 -total 5367 -withname 1 -withcolor 5367 -withlayer 0 -centroid 1 -volume 1 -area 1 -colors { DEEPSKYBLUE2 GREEN MAGENTA1 ORANGE ORANGERED RED } -nbcolors 6 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 2256 -shape 14108
+checkstatshape res_1 -solid 1 -shell 1 -face 2256 -freewire 0 -freeedge 0 -sharededge 5915
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.2529794249 -avg 0.01261497345]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 125 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 32 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 5366 -n2 0 -total 5367 -withname 1 -withcolor 5367 -withlayer 0 -centroid 1 -volume 1 -area 1 -nbcolors 6 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 5366 -n2 0 -total 5367 -withname 1 -withcolor 5367 -withlayer 0 -centroid 1 -volume 1 -area 1 -colors { DEEPSKYBLUE2 GREEN MAGENTA1 ORANGE ORANGERED RED } -nbcolors 6 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 2256 -shape 14108 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 2256 -freewire 0 -freeedge 0 -sharededge 5915 -max_solid 1 -max_shell 1 -max_face 2256 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.2529794249 -avg 0.0126158781 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj10_pm8-ug-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 8 ( 8 ) Summary = 8 ( 8 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 523 ( 523 ) Summary = 3681 ( 3681 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 523 ( 523 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 1541 ( 1541 )
-TOLERANCE : MaxTol = 0.01992087066 ( 0.05869739556 ) AvgTol = 0.003202413767 ( 0.008376755892 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 347 ( 347 ) N2Labels = 0 ( 0 ) TotalLabels = 348 ( 348 ) NameLabels = 1 ( 1 ) ColorLabels = 348 ( 348 ) LayerLabels = 1 ( 1 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 4 ( 4 )
-COLORS : Colors = CYAN1 DARKORANGE1 FORESTGREEN GREEN ( CYAN1 DARKORANGE1 FORESTGREEN GREEN )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 60 ( 60 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 8 -max_faults 0
+checkxstat D_First -n0 1 -n1 347 -n2 0 -total 348 -withname 1 -withcolor 348 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { CYAN1 DARKORANGE1 FORESTGREEN GREEN } -nbcolors 4 -layers { 60 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 523 -shape 3681
+checkstatshape res_1 -solid 1 -shell 1 -face 523 -freewire 0 -freeedge 0 -sharededge 1541
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.05869739556 -avg 0.008376755892]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 8 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 5 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 347 -n2 0 -total 348 -withname 1 -withcolor 348 -withlayer 1 -centroid 0 -volume 0 -area 0 -nbcolors 4 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 347 -n2 0 -total 348 -withname 1 -withcolor 348 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { CYAN1 DARKORANGE1 FORESTGREEN GREEN } -nbcolors 4 -layers { 60 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 523 -shape 3681 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 523 -freewire 0 -freeedge 0 -sharededge 1541 -max_solid 1 -max_shell 1 -max_face 523 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.01992087066 -avg 0.003202413767 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj12_b3-in-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 137 ( 225 ) Summary = 137 ( 225 )
-CHECKSHAPE : Wires = 2 ( 2 ) Faces = 2 ( 2 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 1026 ( 1026 ) Summary = 6914 ( 6914 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 1026 ( 1026 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 2926 ( 2926 )
-TOLERANCE : MaxTol = 7.063803693 ( 7.063803693 ) AvgTol = 0.004095376603 ( 0.004135679611 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = GRAY ( GRAY )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 225 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { GRAY } -nbcolors 1 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 2 -max_faces 2 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 1026 -shape 6914
+checkstatshape res_1 -solid 1 -shell 1 -face 1026 -freewire 0 -freeedge 0 -sharededge 2926
+set max_tol_res_1 [checkmaxtol res_1 -tol 7.063803693 -avg 0.004135679611]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 225 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 137 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { GRAY } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 2 -max_faces 2 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 2 -max_faces 2 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 1026 -shape 6914 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 1026 -freewire 0 -freeedge 0 -sharededge 2926 -max_solid 1 -max_shell 1 -max_face 1026 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 7.063803693 -avg 0.004095376603 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj12_b3-pe-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 24 ( 35 ) Summary = 24 ( 35 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 808 ( 808 ) Summary = 5106 ( 5106 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 808 ( 808 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 2103 ( 2103 )
-TOLERANCE : MaxTol = 0.004098271686 ( 0.009717043682 ) AvgTol = 0.0001699689926 ( 0.000401998914 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = LIGHTSTEELBLUE1 ( LIGHTSTEELBLUE1 )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 35 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { LIGHTSTEELBLUE1 } -nbcolors 1 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 808 -shape 5106
+checkstatshape res_1 -solid 1 -shell 1 -face 808 -freewire 0 -freeedge 0 -sharededge 2103
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.009717043682 -avg 0.000401998914]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 35 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 24 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { LIGHTSTEELBLUE1 } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 808 -shape 5106 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 808 -freewire 0 -freeedge 0 -sharededge 2103 -max_solid 1 -max_shell 1 -max_face 808 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.004098271686 -avg 0.0001699689926 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename PRO15686.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 6 ( 31 ) Summary = 6 ( 31 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 1049 ( 1049 ) Summary = 7165 ( 7163 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 1049 ( 1049 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 3015 ( 3013 )
-TOLERANCE : MaxTol = 0.2096553196 ( 0.2096553196 ) AvgTol = 0.0006174123099 ( 0.006216471924 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = CYAN1 ( CYAN1 )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 33 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { CYAN1 } -nbcolors 1 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 1049 -shape 7163
+checkstatshape res_1 -solid 1 -shell 1 -face 1049 -freewire 0 -freeedge 0 -sharededge 3013
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.2096553196 -avg 0.006216471924]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 33 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 9 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { CYAN1 } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 1049 -shape 7165 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 1049 -freewire 0 -freeedge 0 -sharededge 3015 -max_solid 1 -max_shell 1 -max_face 1049 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.2096553196 -avg 0.0006174123099 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj12_pm10-in-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 79 ( 170 ) Summary = 79 ( 170 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 466 ( 466 ) Summary = 2896 ( 2896 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 466 ( 466 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 1226 ( 1226 )
-TOLERANCE : MaxTol = 0.04984111401 ( 0.04984111401 ) AvgTol = 0.002428500694 ( 0.002464637148 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = WHITE ( WHITE )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 170 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 466 -shape 2896
+checkstatshape res_1 -solid 1 -shell 1 -face 466 -freewire 0 -freeedge 0 -sharededge 1226
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.04984111401 -avg 0.002464637148]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 170 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 79 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { WHITE } -nbcolors 1 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 466 -shape 2896 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 466 -freewire 0 -freeedge 0 -sharededge 1226 -max_solid 1 -max_shell 1 -max_face 466 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.04984111401 -avg 0.002428500694 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
-set LinuxFaulties {CHECKSHAPE}
set filename PRO7187.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 207 ( 290 ) Summary = 207 ( 290 )
-CHECKSHAPE : Wires = 1 ( 1 ) Faces = 1 ( 1 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 0 ( 0 ) Shell = 3 ( 3 ) Face = 773 ( 773 ) Summary = 4593 ( 4592 )
-STATSHAPE : Solid = 0 ( 0 ) Shell = 3 ( 3 ) Face = 773 ( 773 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 1942 ( 1941 )
-TOLERANCE : MaxTol = 0.05634911309 ( 0.05634912759 ) AvgTol = 0.001986523285 ( 0.002335236954 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 274 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 1 -max_faces 1 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 0 -shell 3 -face 773 -shape 4592
+checkstatshape res_1 -solid 0 -shell 3 -face 773 -freewire 0 -freeedge 0 -sharededge 1941
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.05634912759 -avg 0.002335236954]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 1 -max_faults 0
+checkdoc "tpstat c" -max_warns 274 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 183 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 1 -max_faces 1 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 1 -max_faces 1 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 0 -shell 3 -face 773 -shape 4593 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 0 -shell 3 -face 773 -freewire 0 -freeedge 0 -sharededge 1942 -max_solid 0 -max_shell 3 -max_face 773 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.05634911309 -avg 0.001986523285 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename PRO8853.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 325 ( 349 ) Summary = 325 ( 349 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 1858 ( 1858 ) Summary = 12120 ( 12119 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 1858 ( 1858 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 5031 ( 5030 )
-TOLERANCE : MaxTol = 0.009518071089 ( 0.009998449827 ) AvgTol = 0.0009555906781 ( 0.00143467031 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 858 ( 858 ) N2Labels = 0 ( 0 ) TotalLabels = 859 ( 859 ) NameLabels = 1 ( 1 ) ColorLabels = 859 ( 859 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 2 ( 2 )
-COLORS : Colors = DEEPSKYBLUE2 WHITE ( DEEPSKYBLUE2 WHITE )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 352 -max_faults 0
+checkxstat D_First -n0 1 -n1 858 -n2 0 -total 859 -withname 1 -withcolor 859 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { DEEPSKYBLUE2 WHITE } -nbcolors 2 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 1858 -shape 12119
+checkstatshape res_1 -solid 1 -shell 1 -face 1858 -freewire 0 -freeedge 0 -sharededge 5030
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.009998449827 -avg 0.00143467031]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 352 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 288 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 858 -n2 0 -total 859 -withname 1 -withcolor 859 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 2 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 858 -n2 0 -total 859 -withname 1 -withcolor 859 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { DEEPSKYBLUE2 WHITE } -nbcolors 2 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 1858 -shape 12120 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 1858 -freewire 0 -freeedge 0 -sharededge 5031 -max_solid 1 -max_shell 1 -max_face 1858 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.009518071089 -avg 0.0009555906781 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
-
set filename bm4_db_seal_a.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 117 ( 37 ) Summary = 117 ( 37 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 3 ( 3 ) Face = 140 ( 140 ) Summary = 704 ( 704 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 3 ( 3 ) Face = 140 ( 140 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 280 ( 280 )
-TOLERANCE : MaxTol = 0.0004823436197 ( 0.0004827870033 ) AvgTol = 0.0001520351263 ( 0.0001573776642 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 1 ( 1 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = RED ( RED )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 49 ( { 49} )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 36 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { RED } -nbcolors 1 -layers { " 49" } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 3 -face 140 -shape 704
+checkstatshape res_1 -solid 1 -shell 3 -face 140 -freewire 0 -freeedge 0 -sharededge 280
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.0004827870033 -avg 0.0001573776642]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 36 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 116 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { RED } -nbcolors 1 -layers { 49 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 3 -face 140 -shape 704 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 3 -face 140 -freewire 0 -freeedge 0 -sharededge 280 -max_solid 1 -max_shell 3 -max_face 140 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.0004823436197 -avg 0.0001520351263 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
-
set filename Z8INV5.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 114 ( 619 ) Summary = 114 ( 619 )
-CHECKSHAPE : Wires = 17 ( 17 ) Faces = 18 ( 20 ) Shells = 1 ( 1 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 22 ( 22 ) Shell = 24 ( 24 ) Face = 1520 ( 1520 ) Summary = 11210 ( 11195 )
-STATSHAPE : Solid = 22 ( 22 ) Shell = 24 ( 24 ) Face = 1520 ( 1520 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 4784 ( 4774 )
-TOLERANCE : MaxTol = 7.33063502 ( 7.159520237 ) AvgTol = 0.03499829069 ( 0.03222638333 )
-LABELS : N0Labels = 25 ( 25 ) N1Labels = 23 ( 23 ) N2Labels = 0 ( 0 ) TotalLabels = 48 ( 48 ) NameLabels = 48 ( 48 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 621 -max_faults 0
+checkxstat D_First -n0 25 -n1 23 -n2 0 -total 48 -withname 48 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 17 -max_faces 20 -max_shells 1 -max_solids 0
+checknbshapes res_1 -solid 22 -shell 24 -face 1520 -shape 11195
+checkstatshape res_1 -solid 22 -shell 24 -face 1520 -freewire 0 -freeedge 0 -sharededge 4774
+set max_tol_res_1 [checkmaxtol res_1 -tol 7.159520237 -avg 0.03222638333]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 621 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 112 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 25 -n1 23 -n2 0 -total 48 -withname 48 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 25 -n1 23 -n2 0 -total 48 -withname 48 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 17 -max_faces 19 -max_shells 1 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 17 -max_faces 18 -max_shells 1 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 22 -shell 24 -face 1520 -shape 11210 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 22 -shell 24 -face 1520 -freewire 0 -freeedge 0 -sharededge 4784 -max_solid 22 -max_shell 24 -max_face 1520 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 7.33063502 -avg 0.03499829069 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
-
set filename trj9_pm7-id-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 323 ( 263 ) Summary = 323 ( 263 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 2278 ( 2278 ) Summary = 14216 ( 14212 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 2278 ( 2278 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 5961 ( 5957 )
-TOLERANCE : MaxTol = 0.005454457084 ( 0.009853899986 ) AvgTol = 0.0004504506414 ( 0.001189530258 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 5448 ( 5448 ) N2Labels = 0 ( 0 ) TotalLabels = 5449 ( 5449 ) NameLabels = 1 ( 1 ) ColorLabels = 5449 ( 5449 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 1 ( 1 ) Volume = 1 ( 1 ) Area = 1 ( 1 )
-NCOLORS : NColors = 6 ( 6 )
-COLORS : Colors = DEEPSKYBLUE2 GREEN MAGENTA1 ORANGE ORANGERED RED ( DEEPSKYBLUE2 GREEN MAGENTA1 ORANGE ORANGERED RED )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 266 -max_faults 0
+checkxstat D_First -n0 1 -n1 5448 -n2 0 -total 5449 -withname 1 -withcolor 5449 -withlayer 0 -centroid 1 -volume 1 -area 1 -colors { DEEPSKYBLUE2 GREEN MAGENTA1 ORANGE ORANGERED RED } -nbcolors 6 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 2278 -shape 14212
+checkstatshape res_1 -solid 1 -shell 1 -face 2278 -freewire 0 -freeedge 0 -sharededge 5957
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.009853899986 -avg 0.001189530258]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 266 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 277 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 5448 -n2 0 -total 5449 -withname 1 -withcolor 5449 -withlayer 0 -centroid 1 -volume 1 -area 1 -nbcolors 6 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 5448 -n2 0 -total 5449 -withname 1 -withcolor 5449 -withlayer 0 -centroid 1 -volume 1 -area 1 -colors { DEEPSKYBLUE2 GREEN MAGENTA1 ORANGE ORANGERED RED } -nbcolors 6 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 2278 -shape 14216 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 2278 -freewire 0 -freeedge 0 -sharededge 5961 -max_solid 1 -max_shell 1 -max_face 2278 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.005454457084 -avg 0.0004504506414 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj9_pm7-ug-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 8 ( 8 ) Summary = 8 ( 8 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 523 ( 523 ) Summary = 3681 ( 3681 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 523 ( 523 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 1541 ( 1541 )
-TOLERANCE : MaxTol = 0.01992087066 ( 0.05869739556 ) AvgTol = 0.003263131163 ( 0.008376755893 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 347 ( 347 ) N2Labels = 0 ( 0 ) TotalLabels = 348 ( 348 ) NameLabels = 1 ( 1 ) ColorLabels = 348 ( 348 ) LayerLabels = 1 ( 1 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 4 ( 4 )
-COLORS : Colors = CYAN1 DARKORANGE1 FORESTGREEN GREEN ( CYAN1 DARKORANGE1 FORESTGREEN GREEN )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 60 ( 60 )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 8 -max_faults 0
+checkxstat D_First -n0 1 -n1 347 -n2 0 -total 348 -withname 1 -withcolor 348 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { CYAN1 DARKORANGE1 FORESTGREEN GREEN } -nbcolors 4 -layers { 60 } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 523 -shape 3681
+checkstatshape res_1 -solid 1 -shell 1 -face 523 -freewire 0 -freeedge 0 -sharededge 1541
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.05869739556 -avg 0.008376755893]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 8 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 5 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 347 -n2 0 -total 348 -withname 1 -withcolor 348 -withlayer 1 -centroid 0 -volume 0 -area 0 -nbcolors 4 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 347 -n2 0 -total 348 -withname 1 -withcolor 348 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { CYAN1 DARKORANGE1 FORESTGREEN GREEN } -nbcolors 4 -layers { 60 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 523 -shape 3681 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 523 -freewire 0 -freeedge 0 -sharededge 1541 -max_solid 1 -max_shell 1 -max_face 523 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.01992087066 -avg 0.003263131163 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
-
set filename wgehaeuse_solid.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 88 ( 70 ) Summary = 88 ( 70 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 37 ( 37 ) Shell = 58 ( 58 ) Face = 2694 ( 2694 ) Summary = 15918 ( 15918 )
-STATSHAPE : Solid = 81 ( 81 ) Shell = 104 ( 104 ) Face = 3190 ( 3190 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 6450 ( 6450 )
-TOLERANCE : MaxTol = 0.07893772536 ( 0.07893770763 ) AvgTol = 0.00122544179 ( 0.00660493083 )
-LABELS : N0Labels = 37 ( 37 ) N1Labels = 76 ( 76 ) N2Labels = 0 ( 0 ) TotalLabels = 113 ( 113 ) NameLabels = 113 ( 113 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 76 -max_faults 0
+checkxstat D_First -n0 37 -n1 76 -n2 0 -total 113 -withname 113 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 37 -shell 58 -face 2694 -shape 15918
+checkstatshape res_1 -solid 81 -shell 104 -face 3190 -freewire 0 -freeedge 0 -sharededge 6450
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.07893770763 -avg 0.00660493083]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 76 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 48 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 37 -n1 76 -n2 0 -total 113 -withname 113 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 37 -n1 76 -n2 0 -total 113 -withname 113 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 37 -shell 58 -face 2694 -shape 15918 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 81 -shell 104 -face 3190 -freewire 0 -freeedge 0 -sharededge 6450 -max_solid 81 -max_shell 104 -max_face 3190 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.07893772536 -avg 0.00122544179 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
-
set filename r0801_id.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 220 ( 206 ) Summary = 220 ( 206 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 1327 ( 1327 ) Summary = 9260 ( 9174 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 1327 ( 1327 ) FreeWire = 0 ( 0 ) FreeEdge = 84 ( 84 ) SharedEdge = 3872 ( 3871 )
-TOLERANCE : MaxTol = 0.0796871773 ( 0.07968717732 ) AvgTol = 0.0006766809625 ( 0.001248001549 )
-LABELS : N0Labels = 3 ( 3 ) N1Labels = 3707 ( 3707 ) N2Labels = 0 ( 0 ) TotalLabels = 3710 ( 3710 ) NameLabels = 5 ( 5 ) ColorLabels = 3706 ( 3706 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 8 ( 8 )
-COLORS : Colors = DARKGREEN DEEPSKYBLUE2 GREEN MAGENTA1 ORANGE ORANGERED RED YELLOW ( DARKGREEN DEEPSKYBLUE2 GREEN MAGENTA1 ORANGE ORANGERED RED YELLOW )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 204 -max_faults 0
+checkxstat D_First -n0 3 -n1 3707 -n2 0 -total 3710 -withname 5 -withcolor 3706 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { DARKGREEN DEEPSKYBLUE2 GREEN MAGENTA1 ORANGE ORANGERED RED YELLOW } -nbcolors 8 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 1327 -shape 9174
+checkstatshape res_1 -solid 1 -shell 1 -face 1327 -freewire 0 -freeedge 84 -sharededge 3871
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.07968717732 -avg 0.001248001549]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 204 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 186 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3 -n1 3707 -n2 0 -total 3710 -withname 5 -withcolor 3706 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 8 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 3707 -n2 0 -total 3710 -withname 5 -withcolor 3706 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { DARKGREEN DEEPSKYBLUE2 GREEN MAGENTA1 ORANGE ORANGERED RED YELLOW } -nbcolors 8 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 1327 -shape 9260 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 1327 -freewire 0 -freeedge 84 -sharededge 3872 -max_solid 1 -max_shell 1 -max_face 1327 -max_freewire 0 -max_freeedge 84
+checkmaxtol res_2 -tol 0.0796871773 -avg 0.0006766809625 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename r1001_ac.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 3 ) Warnings = 1882 ( 1890 ) Summary = 1882 ( 1893 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 21 ( 21 ) Shell = 22 ( 22 ) Face = 2608 ( 2608 ) Summary = 16815 ( 16739 )
-STATSHAPE : Solid = 49 ( 49 ) Shell = 50 ( 50 ) Face = 3808 ( 3808 ) FreeWire = 0 ( 0 ) FreeEdge = 76 ( 76 ) SharedEdge = 6881 ( 6881 )
-TOLERANCE : MaxTol = 0.00334862762 ( 0.003348661106 ) AvgTol = 7.78998243e-006 ( 7.81141201e-006 )
-LABELS : N0Labels = 25 ( 25 ) N1Labels = 52 ( 52 ) N2Labels = 0 ( 0 ) TotalLabels = 77 ( 77 ) NameLabels = 77 ( 77 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1890 -max_faults 3
+checkxstat D_First -n0 25 -n1 52 -n2 0 -total 77 -withname 77 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 21 -shell 22 -face 2608 -shape 16739
+checkstatshape res_1 -solid 49 -shell 50 -face 3808 -freewire 0 -freeedge 76 -sharededge 6881
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.003348661106 -avg 7.81141201e-006]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1890 -max_faults 3
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 1882 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 25 -n1 52 -n2 0 -total 77 -withname 77 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 25 -n1 52 -n2 0 -total 77 -withname 77 -withcolor 0 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 21 -shell 22 -face 2608 -shape 16815 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 49 -shell 50 -face 3808 -freewire 0 -freeedge 76 -sharededge 6881 -max_solid 49 -max_shell 50 -max_face 3808 -max_freewire 0 -max_freeedge 76
+checkmaxtol res_2 -tol 0.00334862762 -avg 7.78998243e-006 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj4_pm2-ug-203.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 44 ( 491 ) Summary = 44 ( 491 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 81 ( 81 ) Shell = 82 ( 82 ) Face = 2729 ( 2729 ) Summary = 17300 ( 17300 )
-STATSHAPE : Solid = 99 ( 99 ) Shell = 100 ( 100 ) Face = 3044 ( 3044 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 6925 ( 6925 )
-TOLERANCE : MaxTol = 0.009468939314 ( 0.02905820302 ) AvgTol = 0.0002800110602 ( 0.0005350104835 )
-LABELS : N0Labels = 91 ( 91 ) N1Labels = 102 ( 102 ) N2Labels = 0 ( 0 ) TotalLabels = 193 ( 193 ) NameLabels = 193 ( 193 ) ColorLabels = 0 ( 0 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 91 ( 91 ) Volume = 91 ( 91 ) Area = 91 ( 91 )
-NCOLORS : NColors = 0 ( 0 )
-COLORS : Colors = ( )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 493 -max_faults 0
+checkxstat D_First -n0 91 -n1 102 -n2 0 -total 193 -withname 193 -withcolor 0 -withlayer 0 -centroid 91 -volume 91 -area 91 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 81 -shell 82 -face 2729 -shape 17300
+checkstatshape res_1 -solid 99 -shell 100 -face 3044 -freewire 0 -freeedge 0 -sharededge 6925
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.02905820302 -avg 0.0005350104835]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 493 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 34 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 91 -n1 102 -n2 0 -total 193 -withname 193 -withcolor 0 -withlayer 0 -centroid 91 -volume 91 -area 91 -nbcolors 0 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 91 -n1 102 -n2 0 -total 193 -withname 193 -withcolor 0 -withlayer 0 -centroid 91 -volume 91 -area 91 -colors { } -nbcolors 0 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 81 -shell 82 -face 2729 -shape 17300 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 99 -shell 100 -face 3044 -freewire 0 -freeedge 0 -sharededge 6925 -max_solid 99 -max_shell 100 -max_face 3044 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.009468939314 -avg 0.0002800110602 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
-
set filename sd_exhaust-A.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 4 ( 0 ) Summary = 4 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 7 ( 7 ) Shell = 7 ( 7 ) Face = 100 ( 100 ) Summary = 627 ( 627 )
-STATSHAPE : Solid = 7 ( 7 ) Shell = 7 ( 7 ) Face = 100 ( 100 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 240 ( 240 )
-TOLERANCE : MaxTol = 9.577409428e-007 ( 9.577357701e-007 ) AvgTol = 1.446652204e-007 ( 1.445065804e-007 )
-LABELS : N0Labels = 7 ( 7 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 7 ( 7 ) NameLabels = 7 ( 7 ) ColorLabels = 7 ( 7 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 5 ( 5 )
-COLORS : Colors = DARKORANGE1 DEEPPINK MATRAGRAY PURPLE3 YELLOW ( DARKORANGE1 DEEPPINK MATRAGRAY PURPLE3 YELLOW )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 7 -n1 0 -n2 0 -total 7 -withname 7 -withcolor 7 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { DARKORANGE1 DEEPPINK MATRAGRAY PURPLE3 YELLOW } -nbcolors 5 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 7 -shell 7 -face 100 -shape 627
+checkstatshape res_1 -solid 7 -shell 7 -face 100 -freewire 0 -freeedge 0 -sharededge 240
+set max_tol_res_1 [checkmaxtol res_1 -tol 9.577357701e-007 -avg 1.445065804e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 7 -n1 0 -n2 0 -total 7 -withname 7 -withcolor 7 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 5 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 7 -n1 0 -n2 0 -total 7 -withname 7 -withcolor 7 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { DARKORANGE1 DEEPPINK MATRAGRAY PURPLE3 YELLOW } -nbcolors 5 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 7 -shell 7 -face 100 -shape 627 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 7 -shell 7 -face 100 -freewire 0 -freeedge 0 -sharededge 240 -max_solid 7 -max_shell 7 -max_face 100 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 9.577409428e-007 -avg 1.446652204e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
-
set filename sd_exhaust-B.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 4 ( 0 ) Summary = 4 ( 0 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 7 ( 7 ) Shell = 7 ( 7 ) Face = 100 ( 100 ) Summary = 627 ( 627 )
-STATSHAPE : Solid = 7 ( 7 ) Shell = 7 ( 7 ) Face = 100 ( 100 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 240 ( 240 )
-TOLERANCE : MaxTol = 9.577495182e-007 ( 9.577357701e-007 ) AvgTol = 1.43874291e-007 ( 1.43712793e-007 )
-LABELS : N0Labels = 7 ( 7 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 7 ( 7 ) NameLabels = 7 ( 7 ) ColorLabels = 7 ( 7 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 5 ( 5 )
-COLORS : Colors = DARKORANGE1 DEEPPINK MATRAGRAY PURPLE3 YELLOW ( DARKORANGE1 DEEPPINK MATRAGRAY PURPLE3 YELLOW )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+checkxstat D_First -n0 7 -n1 0 -n2 0 -total 7 -withname 7 -withcolor 7 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { DARKORANGE1 DEEPPINK MATRAGRAY PURPLE3 YELLOW } -nbcolors 5 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 7 -shell 7 -face 100 -shape 627
+checkstatshape res_1 -solid 7 -shell 7 -face 100 -freewire 0 -freeedge 0 -sharededge 240
+set max_tol_res_1 [checkmaxtol res_1 -tol 9.577357701e-007 -avg 1.43712793e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 4 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 7 -n1 0 -n2 0 -total 7 -withname 7 -withcolor 7 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 5 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 7 -n1 0 -n2 0 -total 7 -withname 7 -withcolor 7 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { DARKORANGE1 DEEPPINK MATRAGRAY PURPLE3 YELLOW } -nbcolors 5 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 7 -shell 7 -face 100 -shape 627 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 7 -shell 7 -face 100 -freewire 0 -freeedge 0 -sharededge 240 -max_solid 7 -max_shell 7 -max_face 100 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 9.577495182e-007 -avg 1.43874291e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename trj5_pm3-id-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 9 ( 9 ) Summary = 9 ( 9 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 24 ( 24 ) Shell = 24 ( 24 ) Face = 2161 ( 2161 ) Summary = 15061 ( 14810 )
-STATSHAPE : Solid = 117 ( 117 ) Shell = 117 ( 117 ) Face = 10150 ( 10150 ) FreeWire = 0 ( 0 ) FreeEdge = 490 ( 490 ) SharedEdge = 5871 ( 5871 )
-TOLERANCE : MaxTol = 0.004460511696 ( 0.004460511696 ) AvgTol = 2.957595905e-005 ( 2.957595904e-005 )
-LABELS : N0Labels = 52 ( 52 ) N1Labels = 161 ( 161 ) N2Labels = 0 ( 0 ) TotalLabels = 213 ( 213 ) NameLabels = 121 ( 121 ) ColorLabels = 114 ( 114 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 24 ( 24 ) Volume = 24 ( 24 ) Area = 24 ( 24 )
-NCOLORS : NColors = 18 ( 18 )
-COLORS : Colors = ALICEBLUE BLANCHEDALMOND BROWN DARKGREEN DEEPSKYBLUE2 DEEPSKYBLUE3 GOLD GRAY45 LIGHTBLUE2 LIGHTSEAGREEN LIGHTSKYBLUE1 LIGHTSKYBLUE2 MAGENTA1 ROYALBLUE ROYALBLUE1 SKYBLUE1 SKYBLUE3 SLATEBLUE1 ( ALICEBLUE BLANCHEDALMOND BROWN DARKGREEN DEEPSKYBLUE2 DEEPSKYBLUE3 GOLD GRAY45 LIGHTBLUE2 LIGHTSEAGREEN LIGHTSKYBLUE1 LIGHTSKYBLUE2 MAGENTA1 ROYALBLUE ROYALBLUE1 SKYBLUE1 SKYBLUE3 SLATEBLUE1 )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 9 -max_faults 0
+checkxstat D_First -n0 52 -n1 161 -n2 0 -total 213 -withname 121 -withcolor 114 -withlayer 0 -centroid 24 -volume 24 -area 24 -colors { ALICEBLUE BLANCHEDALMOND BROWN DARKGREEN DEEPSKYBLUE2 DEEPSKYBLUE3 GOLD GRAY45 LIGHTBLUE2 LIGHTSEAGREEN LIGHTSKYBLUE1 LIGHTSKYBLUE2 MAGENTA1 ROYALBLUE ROYALBLUE1 SKYBLUE1 SKYBLUE3 SLATEBLUE1 } -nbcolors 18 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 24 -shell 24 -face 2161 -shape 14810
+checkstatshape res_1 -solid 117 -shell 117 -face 10150 -freewire 0 -freeedge 490 -sharededge 5871
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.004460511696 -avg 2.957595904e-005]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 9 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 9 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 52 -n1 161 -n2 0 -total 213 -withname 121 -withcolor 114 -withlayer 0 -centroid 24 -volume 24 -area 24 -nbcolors 18 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 52 -n1 161 -n2 0 -total 213 -withname 121 -withcolor 114 -withlayer 0 -centroid 24 -volume 24 -area 24 -colors { ALICEBLUE BLANCHEDALMOND BROWN DARKGREEN DEEPSKYBLUE2 DEEPSKYBLUE3 GOLD GRAY45 LIGHTBLUE2 LIGHTSEAGREEN LIGHTSKYBLUE1 LIGHTSKYBLUE2 MAGENTA1 ROYALBLUE ROYALBLUE1 SKYBLUE1 SKYBLUE3 SLATEBLUE1 } -nbcolors 18 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 24 -shell 24 -face 2161 -shape 15061 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 117 -shell 117 -face 10150 -freewire 0 -freeedge 490 -sharededge 5871 -max_solid 117 -max_shell 117 -max_face 10150 -max_freewire 0 -max_freeedge 490
+checkmaxtol res_2 -tol 0.004460511696 -avg 2.957595905e-005 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
-
set filename tr10_r0601_id.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 220 ( 206 ) Summary = 220 ( 206 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 1327 ( 1327 ) Summary = 9260 ( 9174 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 1 ( 1 ) Face = 1327 ( 1327 ) FreeWire = 0 ( 0 ) FreeEdge = 84 ( 84 ) SharedEdge = 3872 ( 3871 )
-TOLERANCE : MaxTol = 0.0796871773 ( 0.07968717732 ) AvgTol = 0.0006764981779 ( 0.001240885709 )
-LABELS : N0Labels = 3 ( 3 ) N1Labels = 3707 ( 3707 ) N2Labels = 0 ( 0 ) TotalLabels = 3710 ( 3710 ) NameLabels = 5 ( 5 ) ColorLabels = 3706 ( 3706 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 8 ( 8 )
-COLORS : Colors = DARKGREEN DEEPSKYBLUE2 GREEN MAGENTA1 ORANGE ORANGERED RED YELLOW ( DARKGREEN DEEPSKYBLUE2 GREEN MAGENTA1 ORANGE ORANGERED RED YELLOW )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 204 -max_faults 0
+checkxstat D_First -n0 3 -n1 3707 -n2 0 -total 3710 -withname 5 -withcolor 3706 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { DARKGREEN DEEPSKYBLUE2 GREEN MAGENTA1 ORANGE ORANGERED RED YELLOW } -nbcolors 8 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 1 -face 1327 -shape 9174
+checkstatshape res_1 -solid 1 -shell 1 -face 1327 -freewire 0 -freeedge 84 -sharededge 3871
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.07968717732 -avg 0.001240885709]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 204 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 186 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 3 -n1 3707 -n2 0 -total 3710 -withname 5 -withcolor 3706 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 8 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 3 -n1 3707 -n2 0 -total 3710 -withname 5 -withcolor 3706 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { DARKGREEN DEEPSKYBLUE2 GREEN MAGENTA1 ORANGE ORANGERED RED YELLOW } -nbcolors 8 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 1 -face 1327 -shape 9260 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 1 -face 1327 -freewire 0 -freeedge 84 -sharededge 3872 -max_solid 1 -max_shell 1 -max_face 1327 -max_freewire 0 -max_freeedge 84
+checkmaxtol res_2 -tol 0.0796871773 -avg 0.0006764981779 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
+
set filename tr10_r1001_ac.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 137 ( 137 ) Summary = 137 ( 137 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 61 ( 61 ) Shell = 61 ( 61 ) Face = 4435 ( 4435 ) Summary = 28668 ( 28668 )
-STATSHAPE : Solid = 528 ( 528 ) Shell = 528 ( 528 ) Face = 10635 ( 10635 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 11588 ( 11588 )
-TOLERANCE : MaxTol = 0.218398467 ( 0.218398467 ) AvgTol = 0.001446168688 ( 0.00145991745 )
-LABELS : N0Labels = 63 ( 63 ) N1Labels = 529 ( 529 ) N2Labels = 0 ( 0 ) TotalLabels = 592 ( 592 ) NameLabels = 592 ( 592 ) ColorLabels = 61 ( 61 ) LayerLabels = 61 ( 61 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 16 ( 16 )
-COLORS : Colors = BURLYWOOD2 CADETBLUE CYAN1 DARKORANGE1 DEEPSKYBLUE1 FIREBRICK1 KHAKI1 LIGHTGOLDENROD4 LIGHTSALMON1 LIGHTSEAGREEN MEDIUMPURPLE1 MEDIUMSPRINGGREEN SKYBLUE1 VIOLET WHITE YELLOW ( BURLYWOOD2 CADETBLUE CYAN1 DARKORANGE1 DEEPSKYBLUE1 FIREBRICK1 KHAKI1 LIGHTGOLDENROD4 LIGHTSALMON1 LIGHTSEAGREEN MEDIUMPURPLE1 MEDIUMSPRINGGREEN SKYBLUE1 VIOLET WHITE YELLOW )
-NLAYERS : NLayers = 37 ( 37 )
-LAYERS : Layers = 10|OBJECT 11|OBJECT 12|OBJECT 13|OBJECT 14|OBJECT 15|OBJECT 16|OBJECT 17|OBJECT 18|OBJECT 19|OBJECT 1|OBJECT 20|OBJECT 21|OBJECT 22|OBJECT 2|OBJECT 3|OBJECT 4|OBJECT 5|OBJECT 6|OBJECT 7|OBJECT 8|OBJECT 9|OBJECT BRCH-10|OBJECT BRCH-1|OBJECT BRCH-2|OBJECT BRCH-3|OBJECT BRCH-4|OBJECT BRCH-5|OBJECT BRCH-6|OBJECT BRCH-7|OBJECT BRCH-8|OBJECT BRCH-9|OBJECT DOWELS LWASHER M-50158|OBJECT OBJECT {SHRPSHIM$0$OBJECT} ( 10|OBJECT 11|OBJECT 12|OBJECT 13|OBJECT 14|OBJECT 15|OBJECT 16|OBJECT 17|OBJECT 18|OBJECT 19|OBJECT 1|OBJECT 20|OBJECT 21|OBJECT 22|OBJECT 2|OBJECT 3|OBJECT 4|OBJECT 5|OBJECT 6|OBJECT 7|OBJECT 8|OBJECT 9|OBJECT BRCH-10|OBJECT BRCH-1|OBJECT BRCH-2|OBJECT BRCH-3|OBJECT BRCH-4|OBJECT BRCH-5|OBJECT BRCH-6|OBJECT BRCH-7|OBJECT BRCH-8|OBJECT BRCH-9|OBJECT DOWELS LWASHER M-50158|OBJECT OBJECT {SHRPSHIM$0$OBJECT} )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 137 -max_faults 0
+checkxstat D_First -n0 63 -n1 529 -n2 0 -total 592 -withname 592 -withcolor 61 -withlayer 61 -centroid 0 -volume 0 -area 0 -colors { BURLYWOOD2 CADETBLUE CYAN1 DARKORANGE1 DEEPSKYBLUE1 FIREBRICK1 KHAKI1 LIGHTGOLDENROD4 LIGHTSALMON1 LIGHTSEAGREEN MEDIUMPURPLE1 MEDIUMSPRINGGREEN SKYBLUE1 VIOLET WHITE YELLOW } -nbcolors 16 -layers { "M-50158|OBJECT" "21|OBJECT" "11|OBJECT" "16|OBJECT" "17|OBJECT" "14|OBJECT" "15|OBJECT" "13|OBJECT" "9|OBJECT" "SHRPSHIM$0$OBJECT" "BRCH-9|OBJECT" "22|OBJECT" "OBJECT" "DOWELS" "LWASHER" "12|OBJECT" "10|OBJECT" "BRCH-10|OBJECT" "20|OBJECT" "18|OBJECT" "19|OBJECT" "8|OBJECT" "7|OBJECT" "BRCH-7|OBJECT" "BRCH-8|OBJECT" "6|OBJECT" "BRCH-6|OBJECT" "5|OBJECT" "BRCH-5|OBJECT" "4|OBJECT" "BRCH-4|OBJECT" "3|OBJECT" "BRCH-3|OBJECT" "2|OBJECT" "BRCH-2|OBJECT" "1|OBJECT" "BRCH-1|OBJECT" } -nblayers 37
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 61 -shell 61 -face 4435 -shape 28668
+checkstatshape res_1 -solid 528 -shell 528 -face 10635 -freewire 0 -freeedge 0 -sharededge 11588
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.218398467 -avg 0.00145991745]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 137 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 137 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 63 -n1 529 -n2 0 -total 592 -withname 592 -withcolor 61 -withlayer 61 -centroid 0 -volume 0 -area 0 -nbcolors 16 -nblayers 37
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 63 -n1 529 -n2 0 -total 592 -withname 592 -withcolor 61 -withlayer 61 -centroid 0 -volume 0 -area 0 -colors { BURLYWOOD2 CADETBLUE CYAN1 DARKORANGE1 DEEPSKYBLUE1 FIREBRICK1 KHAKI1 LIGHTGOLDENROD4 LIGHTSALMON1 LIGHTSEAGREEN MEDIUMPURPLE1 MEDIUMSPRINGGREEN SKYBLUE1 VIOLET WHITE YELLOW } -nbcolors 16 -layers { "M-50158|OBJECT" "21|OBJECT" "11|OBJECT" "16|OBJECT" "17|OBJECT" "14|OBJECT" "15|OBJECT" "13|OBJECT" "9|OBJECT" "SHRPSHIM$0$OBJECT" "BRCH-9|OBJECT" "22|OBJECT" "OBJECT" "DOWELS" "LWASHER" "12|OBJECT" "10|OBJECT" "BRCH-10|OBJECT" "20|OBJECT" "18|OBJECT" "19|OBJECT" "8|OBJECT" "7|OBJECT" "BRCH-7|OBJECT" "BRCH-8|OBJECT" "6|OBJECT" "BRCH-6|OBJECT" "5|OBJECT" "BRCH-5|OBJECT" "4|OBJECT" "BRCH-4|OBJECT" "3|OBJECT" "BRCH-3|OBJECT" "2|OBJECT" "BRCH-2|OBJECT" "1|OBJECT" "BRCH-1|OBJECT" } -nblayers 37
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 61 -shell 61 -face 4435 -shape 28668 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 528 -shell 528 -face 10635 -freewire 0 -freeedge 0 -sharededge 11588 -max_solid 528 -max_shell 528 -max_face 10635 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.218398467 -avg 0.001446168688 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
-
set filename bm4_db_seal_c.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 117 ( 39 ) Summary = 117 ( 39 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 1 ( 1 ) Shell = 3 ( 3 ) Face = 140 ( 140 ) Summary = 704 ( 704 )
-STATSHAPE : Solid = 1 ( 1 ) Shell = 3 ( 3 ) Face = 140 ( 140 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 280 ( 280 )
-TOLERANCE : MaxTol = 0.0004823436197 ( 0.0004827870033 ) AvgTol = 0.0001575316088 ( 0.000165115431 )
-LABELS : N0Labels = 1 ( 1 ) N1Labels = 0 ( 0 ) N2Labels = 0 ( 0 ) TotalLabels = 1 ( 1 ) NameLabels = 1 ( 1 ) ColorLabels = 1 ( 1 ) LayerLabels = 1 ( 1 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 1 ( 1 )
-COLORS : Colors = RED ( RED )
-NLAYERS : NLayers = 1 ( 1 )
-LAYERS : Layers = 49 ( { 49} )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 39 -max_faults 0
+checkxstat D_First -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { RED } -nbcolors 1 -layers { " 49" } -nblayers 1
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 1 -shell 3 -face 140 -shape 704
+checkstatshape res_1 -solid 1 -shell 3 -face 140 -freewire 0 -freeedge 0 -sharededge 280
+set max_tol_res_1 [checkmaxtol res_1 -tol 0.0004827870033 -avg 0.000165115431]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 39 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 118 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -nbcolors 1 -nblayers 1
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 1 -n1 0 -n2 0 -total 1 -withname 1 -withcolor 1 -withlayer 1 -centroid 0 -volume 0 -area 0 -colors { RED } -nbcolors 1 -layers { 49 } -nblayers 1
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 1 -shell 3 -face 140 -shape 704 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 1 -shell 3 -face 140 -freewire 0 -freeedge 0 -sharededge 280 -max_solid 1 -max_shell 3 -max_face 140 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 0.0004823436197 -avg 0.0001575316088 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
puts "TODO CR23096 ALL: TPSTAT : Faulty"
-
set filename trj7_pm5-sd-214.stp
-set ref_data {
-DATA : Faulties = 0 ( 0 ) Warnings = 0 ( 0 ) Summary = 0 ( 0 )
-TPSTAT : Faulties = 0 ( 0 ) Warnings = 14 ( 6 ) Summary = 14 ( 6 )
-CHECKSHAPE : Wires = 0 ( 0 ) Faces = 0 ( 0 ) Shells = 0 ( 0 ) Solids = 0 ( 0 )
-NBSHAPES : Solid = 37 ( 37 ) Shell = 37 ( 37 ) Face = 1477 ( 1477 ) Summary = 10045 ( 10045 )
-STATSHAPE : Solid = 157 ( 157 ) Shell = 157 ( 157 ) Face = 6549 ( 6549 ) FreeWire = 0 ( 0 ) FreeEdge = 0 ( 0 ) SharedEdge = 4087 ( 4087 )
-TOLERANCE : MaxTol = 9.800652784e-007 ( 9.800405136e-007 ) AvgTol = 1.060552515e-007 ( 1.059616207e-007 )
-LABELS : N0Labels = 49 ( 49 ) N1Labels = 207 ( 207 ) N2Labels = 0 ( 0 ) TotalLabels = 256 ( 256 ) NameLabels = 213 ( 213 ) ColorLabels = 80 ( 80 ) LayerLabels = 0 ( 0 )
-PROPS : Centroid = 0 ( 0 ) Volume = 0 ( 0 ) Area = 0 ( 0 )
-NCOLORS : NColors = 21 ( 21 )
-COLORS : Colors = BLUE1 DARKORANGE DARKSLATEGRAY1 DODGERBLUE2 GRAY13 GRAY18 GRAY27 GRAY30 GRAY31 GRAY4 GRAY65 GRAY8 GRAY85 GRAY94 GREEN LIGHTPINK2 MATRAGRAY RED RED RED4 WHITE ( BLUE1 DARKORANGE DARKSLATEGRAY1 DODGERBLUE2 GRAY13 GRAY18 GRAY27 GRAY30 GRAY31 GRAY4 GRAY65 GRAY8 GRAY85 GRAY94 GREEN LIGHTPINK2 MATRAGRAY RED RED RED4 WHITE )
-NLAYERS : NLayers = 0 ( 0 )
-LAYERS : Layers = ( )
-
-}
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 6 -max_faults 0
+checkxstat D_First -n0 49 -n1 207 -n2 0 -total 256 -withname 213 -withcolor 80 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 DARKORANGE DARKSLATEGRAY1 DODGERBLUE2 GRAY13 GRAY18 GRAY27 GRAY30 GRAY31 GRAY4 GRAY65 GRAY8 GRAY85 GRAY94 GREEN LIGHTPINK2 MATRAGRAY RED RED RED4 WHITE } -nbcolors 21 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 37 -shell 37 -face 1477 -shape 10045
+checkstatshape res_1 -solid 157 -shell 157 -face 6549 -freewire 0 -freeedge 0 -sharededge 4087
+set max_tol_res_1 [checkmaxtol res_1 -tol 9.800405136e-007 -avg 1.059616207e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 6 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 14 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 49 -n1 207 -n2 0 -total 256 -withname 213 -withcolor 80 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 21 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 49 -n1 207 -n2 0 -total 256 -withname 213 -withcolor 80 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 DARKORANGE DARKSLATEGRAY1 DODGERBLUE2 GRAY13 GRAY18 GRAY27 GRAY30 GRAY31 GRAY4 GRAY65 GRAY8 GRAY85 GRAY94 GREEN LIGHTPINK2 MATRAGRAY RED RED RED4 WHITE } -nbcolors 21 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 37 -shell 37 -face 1477 -shape 10045 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 157 -shell 157 -face 6549 -freewire 0 -freeedge 0 -sharededge 4087 -max_solid 157 -max_shell 157 -max_face 6549 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 9.800652784e-007 -avg 1.060552515e-007 -max_tol ${max_tol_res_1}
+
-# !!!! This file is generated automatically, do not edit manually! See end script
-puts "TODO CR23096 ALL: Error: First - file was not read - exception "
-puts "TODO CR23096 ALL: Error : Here is reading problem"
-
+puts "TODO CR23096 ALL: Error: file buc60990.stp was not read"
+puts "TODO CR23096 ALL: Tcl Exception: D_First is not a document"
+puts "TODO CR23096 ALL: TEST INCOMPLETE"
set filename buc60990.stp
+
+
+ReadFileToDoc ${filename}
+
+puts "Check document D_First"
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 6 -max_faults 0
+checkxstat D_First -n0 49 -n1 207 -n2 0 -total 256 -withname 213 -withcolor 80 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 DARKORANGE DARKSLATEGRAY1 DODGERBLUE2 GRAY13 GRAY18 GRAY27 GRAY30 GRAY31 GRAY4 GRAY65 GRAY8 GRAY85 GRAY94 GREEN LIGHTPINK2 MATRAGRAY RED RED RED4 WHITE } -nbcolors 21 -layers { } -nblayers 0
+
+XGetOneShape res_1 D_First
+
+puts "Check shape from document D_First"
+checkshapeff res_1 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+checknbshapes res_1 -solid 37 -shell 37 -face 1477 -shape 10045
+checkstatshape res_1 -solid 157 -shell 157 -face 6549 -freewire 0 -freeedge 0 -sharededge 4087
+set max_tol_res_1 [checkmaxtol res_1 -tol 9.800405136e-007 -avg 1.059616207e-007]
+
+ReOpenDoc ${filename}
+
+XGetOneShape res_2 D_Second
+
+puts "Check document D_Second"
+puts "Compare with document D_First"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 6 -max_faults 0
+puts "Compare with reference data"
+checkdoc "data c" -max_warns 0 -max_faults 0
+checkdoc "tpstat c" -max_warns 0 -max_faults 0
+
+puts "Compare with doc D_First"
+checkxstat D_Second -n0 49 -n1 207 -n2 0 -total 256 -withname 213 -withcolor 80 -withlayer 0 -centroid 0 -volume 0 -area 0 -nbcolors 21 -nblayers 0
+
+puts "Compare with reference values"
+checkxstat D_Second -n0 49 -n1 207 -n2 0 -total 256 -withname 213 -withcolor 80 -withlayer 0 -centroid 0 -volume 0 -area 0 -colors { BLUE1 DARKORANGE DARKSLATEGRAY1 DODGERBLUE2 GRAY13 GRAY18 GRAY27 GRAY30 GRAY31 GRAY4 GRAY65 GRAY8 GRAY85 GRAY94 GREEN LIGHTPINK2 MATRAGRAY RED RED RED4 WHITE } -nbcolors 21 -layers { } -nblayers 0
+
+puts "Check shape from document D_Second"
+puts "Compare with shape res_1"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+puts "Compare with reference data"
+checkshapeff res_2 -max_wires 0 -max_faces 0 -max_shells 0 -max_solids 0
+set nbshapes_res_1 [nbshapes res_1]
+regexp {SHAPE +: +([-0-9.+eE]+)} ${nbshapes_res_1} full shape_res_1
+checknbshapes res_2 -solid 37 -shell 37 -face 1477 -shape 10045 -not_de_iges ${shape_res_1}
+checkstatshape res_2 -solid 157 -shell 157 -face 6549 -freewire 0 -freeedge 0 -sharededge 4087 -max_solid 157 -max_shell 157 -max_face 6549 -max_freewire 0 -max_freeedge 0
+checkmaxtol res_2 -tol 9.800652784e-007 -avg 1.060552515e-007 -max_tol ${max_tol_res_1}
+
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 1359413.47384844
+checkmaxtol result -tol 1359413.47384844
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 5957311123.3524904
+checkmaxtol result -tol 5957311123.3524904
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 1.2306084135791399e-005
+checkmaxtol result -tol 1.2306084135791399e-005
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.016759665225791299
+checkmaxtol result -tol 0.016759665225791299
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 4.9999999999999998e-007
+checkmaxtol result -tol 4.9999999999999998e-007
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 4.9999999999999998e-007
+checkmaxtol result -tol 4.9999999999999998e-007
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 4.5468477305930302e-006
+checkmaxtol result -tol 4.5468477305930302e-006
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 1.08968613084935e-007
+checkmaxtol result -tol 1.08968613084935e-007
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-007
+checkmaxtol result -tol 9.9999999999999995e-007
checknbshapes result -shell 1
checkfreebounds result 7
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-007
+checkmaxtol result -tol 9.9999999999999995e-007
checknbshapes result -shell 1
checkfreebounds result 8
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-007
+checkmaxtol result -tol 9.9999999999999995e-007
checknbshapes result -shell 1
checkfreebounds result 8
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-007
+checkmaxtol result -tol 9.9999999999999995e-007
checknbshapes result -shell 1
checkfreebounds result 4
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-007
+checkmaxtol result -tol 9.9999999999999995e-007
checknbshapes result -shell 1
checkfreebounds result 14
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.0011000000000000001
+checkmaxtol result -tol 0.0011000000000000001
checknbshapes result -shell 1
checkfreebounds result 17
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.0011000000000000001
+checkmaxtol result -tol 0.0011000000000000001
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.001
+checkmaxtol result -tol 0.001
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.001
+checkmaxtol result -tol 0.001
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.0235352592031246
+checkmaxtol result -tol 0.0235352592031246
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.001
+checkmaxtol result -tol 0.001
checknbshapes result -shell 1
checkfreebounds result 8
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.001
+checkmaxtol result -tol 0.001
checknbshapes result -shell 1
checkfreebounds result 46
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.000113170243210908
+checkmaxtol result -tol 0.000113170243210908
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-007
+checkmaxtol result -tol 9.9999999999999995e-007
checknbshapes result -shell 1
checkfreebounds result 9
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-007
+checkmaxtol result -tol 9.9999999999999995e-007
checknbshapes result -shell 1
checkfreebounds result 14
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-007
+checkmaxtol result -tol 9.9999999999999995e-007
checknbshapes result -shell 1
checkfreebounds result 17
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-007
+checkmaxtol result -tol 9.9999999999999995e-007
checknbshapes result -shell 1
checkfreebounds result 14
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-007
+checkmaxtol result -tol 9.9999999999999995e-007
checknbshapes result -shell 1
checkfreebounds result 15
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.014670260636369852
+checkmaxtol result -tol 0.014670260636369852
checknbshapes result -shell 1
checkfreebounds result 26
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-007
+checkmaxtol result -tol 9.9999999999999995e-007
checknbshapes result -shell 1
checkfreebounds result 46
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-007
+checkmaxtol result -tol 9.9999999999999995e-007
checknbshapes result -shell 1
checkfreebounds result 11
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-007
+checkmaxtol result -tol 9.9999999999999995e-007
checknbshapes result -shell 1
checkfreebounds result 8
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-007
+checkmaxtol result -tol 9.9999999999999995e-007
checknbshapes result -shell 1
checkfreebounds result 16
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-007
+checkmaxtol result -tol 9.9999999999999995e-007
checknbshapes result -shell 1
checkfreebounds result 14
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-007
+checkmaxtol result -tol 9.9999999999999995e-007
checknbshapes result -shell 1
checkfreebounds result 8
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.014624921005106987
+checkmaxtol result -tol 0.014624921005106987
checknbshapes result -shell 1
checkfreebounds result 33
checkfaults result a 2
sewing result $tol a
-checkmaxtol result -ref 8.0000000199999993e-006
+checkmaxtol result -tol 8.0000000199999993e-006
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.1596991692382498e-007
+checkmaxtol result -tol 9.1596991692382498e-007
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 6.0000000000000002e-005
+checkmaxtol result -tol 6.0000000000000002e-005
checknbshapes result -shell 1
checkfreebounds result 7
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 6.0000000000000002e-005
+checkmaxtol result -tol 6.0000000000000002e-005
checknbshapes result -shell 1
checkfreebounds result 7
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 1.0000000000000001e-005
+checkmaxtol result -tol 1.0000000000000001e-005
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 6.4334572160106699e-005
+checkmaxtol result -tol 6.4334572160106699e-005
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.012181724668586099
+checkmaxtol result -tol 0.012181724668586099
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 8
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.122091641974009
+checkmaxtol result -tol 0.122091641974009
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 3.0000002000000001e-007
+checkmaxtol result -tol 3.0000002000000001e-007
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 1.000000002e-005
+checkmaxtol result -tol 1.000000002e-005
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 1.200000002e-005
+checkmaxtol result -tol 1.200000002e-005
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 1.000000002e-005
+checkmaxtol result -tol 1.000000002e-005
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 1.200000002e-005
+checkmaxtol result -tol 1.200000002e-005
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 2.0000000020000001e-005
+checkmaxtol result -tol 2.0000000020000001e-005
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 1.0000000000000001e-005
+checkmaxtol result -tol 1.0000000000000001e-005
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 2.02e-005
+checkmaxtol result -tol 2.02e-005
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 1.000000002e-005
+checkmaxtol result -tol 1.000000002e-005
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.00233614571364717
+checkmaxtol result -tol 0.00233614571364717
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.0114942566417353
+checkmaxtol result -tol 0.0114942566417353
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 1.200000002e-005
+checkmaxtol result -tol 1.200000002e-005
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 1.000000002e-005
+checkmaxtol result -tol 1.000000002e-005
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 1.500000002e-005
+checkmaxtol result -tol 1.500000002e-005
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 1.7996370773212498e-005
+checkmaxtol result -tol 1.7996370773212498e-005
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 11.7707435016017
+checkmaxtol result -tol 11.7707435016017
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 11.7707435016017
+checkmaxtol result -tol 11.7707435016017
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.000113170243210908
+checkmaxtol result -tol 0.000113170243210908
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.0100725221676937
+checkmaxtol result -tol 0.0100725221676937
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.00022110000001999999
+checkmaxtol result -tol 0.00022110000001999999
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.0001
+checkmaxtol result -tol 0.0001
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.0001
+checkmaxtol result -tol 0.0001
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 1.08239222029239e-006
+checkmaxtol result -tol 1.08239222029239e-006
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.0046110822398496704
+checkmaxtol result -tol 0.0046110822398496704
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 5.98000000519996e-005
+checkmaxtol result -tol 5.98000000519996e-005
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 8.0000000199999993e-006
+checkmaxtol result -tol 8.0000000199999993e-006
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 4.9999999999999998e-007
+checkmaxtol result -tol 4.9999999999999998e-007
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.00017424461414289899
+checkmaxtol result -tol 0.00017424461414289899
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 1.460000002e-005
+checkmaxtol result -tol 1.460000002e-005
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 2.0400000000400001e-005
+checkmaxtol result -tol 2.0400000000400001e-005
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.000773943070058072
+checkmaxtol result -tol 0.000773943070058072
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.00018148222616289899
+checkmaxtol result -tol 0.00018148222616289899
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 3.00000e-003
+checkmaxtol result -tol 3.00000e-003
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.0001
+checkmaxtol result -tol 0.0001
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.015003422853356201
+checkmaxtol result -tol 0.015003422853356201
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.00061213387314675905
+checkmaxtol result -tol 0.00061213387314675905
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.0053719719549660599
+checkmaxtol result -tol 0.0053719719549660599
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.10000000000000001
+checkmaxtol result -tol 0.10000000000000001
checknbshapes result -shell 1
checkfreebounds result 24
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.0011000000000000001
+checkmaxtol result -tol 0.0011000000000000001
checknbshapes result -shell 1
checkfreebounds result 12
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 1.0000000000000001e-005
+checkmaxtol result -tol 1.0000000000000001e-005
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 1.98999977111814e-007
+checkmaxtol result -tol 1.98999977111814e-007
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 4.2400000199999997e-006
+checkmaxtol result -tol 4.2400000199999997e-006
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.0016162494420750701
+checkmaxtol result -tol 0.0016162494420750701
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 1.0000000000000001e-005
+checkmaxtol result -tol 1.0000000000000001e-005
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.00025956060366290801
+checkmaxtol result -tol 0.00025956060366290801
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 1.8756782248597201e-005
+checkmaxtol result -tol 1.8756782248597201e-005
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 5.07875742322483e-005
+checkmaxtol result -tol 5.07875742322483e-005
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.0001
+checkmaxtol result -tol 0.0001
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 2.79910948145135e-005
+checkmaxtol result -tol 2.79910948145135e-005
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.000783731191168587
+checkmaxtol result -tol 0.000783731191168587
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.00097460307082579899
+checkmaxtol result -tol 0.00097460307082579899
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.00097460307039443702
+checkmaxtol result -tol 0.00097460307039443702
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.0001
+checkmaxtol result -tol 0.0001
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 7.0000000200000004e-006
+checkmaxtol result -tol 7.0000000200000004e-006
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.023145757709830499
+checkmaxtol result -tol 0.023145757709830499
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.000773943070058072
+checkmaxtol result -tol 0.000773943070058072
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.00031558263573761599
+checkmaxtol result -tol 0.00031558263573761599
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.00031558263573761599
+checkmaxtol result -tol 0.00031558263573761599
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.00025231630025635899
+checkmaxtol result -tol 0.00025231630025635899
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.0001
+checkmaxtol result -tol 0.0001
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.0011889853520389601
+checkmaxtol result -tol 0.0011889853520389601
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.119903315235504
+checkmaxtol result -tol 0.119903315235504
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 7.4129846459554597e-005
+checkmaxtol result -tol 7.4129846459554597e-005
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.000122107904793535
+checkmaxtol result -tol 0.000122107904793535
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 6.2894351252427993e-005
+checkmaxtol result -tol 6.2894351252427993e-005
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.346612137892993
+checkmaxtol result -tol 0.346612137892993
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 6.4716836571128103e-007
+checkmaxtol result -tol 6.4716836571128103e-007
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.0100725221676937
+checkmaxtol result -tol 0.0100725221676937
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 2.1242185303116601e-007
+checkmaxtol result -tol 2.1242185303116601e-007
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 1.6601833317536698e-005
+checkmaxtol result -tol 1.6601833317536698e-005
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 1.1000000000000001e-007
+checkmaxtol result -tol 1.1000000000000001e-007
checknbshapes result -shell 1
checkfreebounds result 6
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 1.1000000000000001e-007
+checkmaxtol result -tol 1.1000000000000001e-007
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.00016252800298968801
+checkmaxtol result -tol 0.00016252800298968801
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.0011000000000000001
+checkmaxtol result -tol 0.0011000000000000001
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.0011000000000000001
+checkmaxtol result -tol 0.0011000000000000001
checknbshapes result -shell 1
checkfreebounds result 6
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.0011000000000000001
+checkmaxtol result -tol 0.0011000000000000001
checknbshapes result -shell 1
checkfreebounds result 13
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.0011000000000000001
+checkmaxtol result -tol 0.0011000000000000001
checknbshapes result -shell 1
checkfreebounds result 17
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.0011000000000000001
+checkmaxtol result -tol 0.0011000000000000001
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.0011000000000000001
+checkmaxtol result -tol 0.0011000000000000001
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.0011000000000000001
+checkmaxtol result -tol 0.0011000000000000001
checknbshapes result -shell 1
checkfreebounds result 6
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.017599398665274602
+checkmaxtol result -tol 0.017599398665274602
checknbshapes result -shell 1
checkfreebounds result 8
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 1.0127851700922299e-005
+checkmaxtol result -tol 1.0127851700922299e-005
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.001
+checkmaxtol result -tol 0.001
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.0054801324024013904
+checkmaxtol result -tol 0.0054801324024013904
checknbshapes result -shell 1
checkfreebounds result 8
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.001
+checkmaxtol result -tol 0.001
checknbshapes result -shell 1
checkfreebounds result 12
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.00061949121084422902
+checkmaxtol result -tol 0.00061949121084422902
checknbshapes result -shell 1
checkfreebounds result 9
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 2.6929942488295899e-007
+checkmaxtol result -tol 2.6929942488295899e-007
checknbshapes result -shell 1
checkfreebounds result 12
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.0001
+checkmaxtol result -tol 0.0001
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.001
+checkmaxtol result -tol 0.001
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.00050000002000000004
+checkmaxtol result -tol 0.00050000002000000004
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 8
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.001
+checkmaxtol result -tol 0.001
checknbshapes result -shell 1
checkfreebounds result 9
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 5.02135090804588e-005
+checkmaxtol result -tol 5.02135090804588e-005
checknbshapes result -shell 1
checkfreebounds result 8
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 10
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.00020000000000000001
+checkmaxtol result -tol 0.00020000000000000001
checknbshapes result -shell 1
checkfreebounds result 10
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.016943835629063399
+checkmaxtol result -tol 0.016943835629063399
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 1.2131527945546401e-006
+checkmaxtol result -tol 1.2131527945546401e-006
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 1.3140772547215899e-005
+checkmaxtol result -tol 1.3140772547215899e-005
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.00097562601414331103
+checkmaxtol result -tol 0.00097562601414331103
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.000783731191168587
+checkmaxtol result -tol 0.000783731191168587
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-007
+checkmaxtol result -tol 9.9999999999999995e-007
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 1.09999999999996e-007
+checkmaxtol result -tol 1.09999999999996e-007
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 1.0000000000000001e-005
+checkmaxtol result -tol 1.0000000000000001e-005
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.5000000019999998e-005
+checkmaxtol result -tol 9.5000000019999998e-005
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 1.0000000000000001e-005
+checkmaxtol result -tol 1.0000000000000001e-005
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.0001
+checkmaxtol result -tol 0.0001
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 8.5607955932617102e-007
+checkmaxtol result -tol 8.5607955932617102e-007
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.0011000000000000001
+checkmaxtol result -tol 0.0011000000000000001
checknbshapes result -shell 1
checkfreebounds result 12
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.00020000000000000001
+checkmaxtol result -tol 0.00020000000000000001
checknbshapes result -shell 1
checkfreebounds result 8
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.001
+checkmaxtol result -tol 0.001
checknbshapes result -shell 1
checkfreebounds result 5
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 4.9999999999999998e-007
+checkmaxtol result -tol 4.9999999999999998e-007
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.001
+checkmaxtol result -tol 0.001
checknbshapes result -shell 1
checkfreebounds result 12
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 8
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.00029999999999999997
+checkmaxtol result -tol 0.00029999999999999997
checknbshapes result -shell 1
checkfreebounds result 6
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 4.9999999999999998e-007
+checkmaxtol result -tol 4.9999999999999998e-007
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-007
+checkmaxtol result -tol 9.9999999999999995e-007
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.001
+checkmaxtol result -tol 0.001
checknbshapes result -shell 1
checkfreebounds result 10
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.00050000002000000004
+checkmaxtol result -tol 0.00050000002000000004
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.001
+checkmaxtol result -tol 0.001
checknbshapes result -shell 1
checkfreebounds result 12
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.001
+checkmaxtol result -tol 0.001
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.001
+checkmaxtol result -tol 0.001
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.001
+checkmaxtol result -tol 0.001
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.001
+checkmaxtol result -tol 0.001
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.001
+checkmaxtol result -tol 0.001
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.001
+checkmaxtol result -tol 0.001
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 4.9999999999999998e-007
+checkmaxtol result -tol 4.9999999999999998e-007
checknbshapes result -shell 1
checkfreebounds result 4
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.00058414055871530202
+checkmaxtol result -tol 0.00058414055871530202
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.00058414055871530202
+checkmaxtol result -tol 0.00058414055871530202
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.0213359670772462
+checkmaxtol result -tol 0.0213359670772462
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.0087400917007073396
+checkmaxtol result -tol 0.0087400917007073396
checknbshapes result -shell 1
checkfreebounds result 60
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.0039121873968644503
+checkmaxtol result -tol 0.0039121873968644503
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.0001
+checkmaxtol result -tol 0.0001
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 5.5222438666594701e-005
+checkmaxtol result -tol 5.5222438666594701e-005
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.0001
+checkmaxtol result -tol 0.0001
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 1.12665115600746e-005
+checkmaxtol result -tol 1.12665115600746e-005
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.000109640857813354
+checkmaxtol result -tol 0.000109640857813354
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.0001
+checkmaxtol result -tol 0.0001
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.0174505693125038
+checkmaxtol result -tol 0.0174505693125038
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.00192061858482228
+checkmaxtol result -tol 0.00192061858482228
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 3.0000000000000001e-006
+checkmaxtol result -tol 3.0000000000000001e-006
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.00021400480916620001
+checkmaxtol result -tol 0.00021400480916620001
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.0001
+checkmaxtol result -tol 0.0001
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 6.1017571924071301e-006
+checkmaxtol result -tol 6.1017571924071301e-006
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 3.4206251112414802e-005
+checkmaxtol result -tol 3.4206251112414802e-005
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.001
+checkmaxtol result -tol 0.001
checknbshapes result -shell 1
checkfreebounds result 10
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.041024553814771998
+checkmaxtol result -tol 0.041024553814771998
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 3.1415926535892699e-006
+checkmaxtol result -tol 3.1415926535892699e-006
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.0068166775109053598
+checkmaxtol result -tol 0.0068166775109053598
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 1.000000002e-005
+checkmaxtol result -tol 1.000000002e-005
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 4.9594346536625702e-005
+checkmaxtol result -tol 4.9594346536625702e-005
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.0001
+checkmaxtol result -tol 0.0001
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.0021737160788762402
+checkmaxtol result -tol 0.0021737160788762402
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.0069355742707295602
+checkmaxtol result -tol 0.0069355742707295602
checknbshapes result -shell 1
checkfreebounds result 14
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 2.5504968559703701e-005
+checkmaxtol result -tol 2.5504968559703701e-005
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.0011000000000000001
+checkmaxtol result -tol 0.0011000000000000001
checknbshapes result -shell 1
checkfreebounds result 8
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.052873794131585397
+checkmaxtol result -tol 0.052873794131585397
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.0001
+checkmaxtol result -tol 0.0001
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.0001
+checkmaxtol result -tol 0.0001
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.0024851934068307198
+checkmaxtol result -tol 0.0024851934068307198
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 3.14159265358979e-007
+checkmaxtol result -tol 3.14159265358979e-007
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 6.2831853071795896e-007
+checkmaxtol result -tol 6.2831853071795896e-007
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 6.2831853071795896e-007
+checkmaxtol result -tol 6.2831853071795896e-007
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.000121486454609844
+checkmaxtol result -tol 0.000121486454609844
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.000319190444367207
+checkmaxtol result -tol 0.000319190444367207
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 3.3317643451788799
+checkmaxtol result -tol 3.3317643451788799
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 7.2715246170233998e+200
+checkmaxtol result -tol 7.2715246170233998e+200
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.3582670937717103e-006
+checkmaxtol result -tol 9.3582670937717103e-006
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.016894872964297199
+checkmaxtol result -tol 0.016894872964297199
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 1.60397736903065e-005
+checkmaxtol result -tol 1.60397736903065e-005
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.011092740551156799
+checkmaxtol result -tol 0.011092740551156799
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 1.72571274507878e-006
+checkmaxtol result -tol 1.72571274507878e-006
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.000100329639497246
+checkmaxtol result -tol 0.000100329639497246
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-007
+checkmaxtol result -tol 9.9999999999999995e-007
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.00013168406623192399
+checkmaxtol result -tol 0.00013168406623192399
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.00408766829975136
+checkmaxtol result -tol 0.00408766829975136
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.0035821432134069929
+checkmaxtol result -tol 0.0035821432134069929
checknbshapes result -shell 1
checkfreebounds result 74
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 1.0246950765959601e-005
+checkmaxtol result -tol 1.0246950765959601e-005
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 2.1079756472072801e-005
+checkmaxtol result -tol 2.1079756472072801e-005
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 1.0216478440458501e-005
+checkmaxtol result -tol 1.0216478440458501e-005
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 4.5
+checkmaxtol result -tol 4.5
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.02104799827938
+checkmaxtol result -tol 0.02104799827938
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.0030000000000000001
+checkmaxtol result -tol 0.0030000000000000001
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.0030000000000000001
+checkmaxtol result -tol 0.0030000000000000001
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 4.9999999999999998e-007
+checkmaxtol result -tol 4.9999999999999998e-007
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 4.9999999999999998e-007
+checkmaxtol result -tol 4.9999999999999998e-007
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 4.5
+checkmaxtol result -tol 4.5
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.0011000000000000001
+checkmaxtol result -tol 0.0011000000000000001
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.0011000000000000001
+checkmaxtol result -tol 0.0011000000000000001
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.00066117295490300803
+checkmaxtol result -tol 0.00066117295490300803
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.0050001000000000004
+checkmaxtol result -tol 0.0050001000000000004
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 4.0800000000399998e-005
+checkmaxtol result -tol 4.0800000000399998e-005
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 2.0400000000400001e-005
+checkmaxtol result -tol 2.0400000000400001e-005
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 8.1600000019999998e-005
+checkmaxtol result -tol 8.1600000019999998e-005
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.022202144948888329
+checkmaxtol result -tol 0.022202144948888329
checknbshapes result -shell 1
checkfreebounds result 8
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 119.7091229132561
+checkmaxtol result -tol 119.7091229132561
checknbshapes result -shell 1
checkfreebounds result 5
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 2.4000000003999999e-005
+checkmaxtol result -tol 2.4000000003999999e-005
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.0001
+checkmaxtol result -tol 0.0001
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.0011000000000000001
+checkmaxtol result -tol 0.0011000000000000001
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 77.938759360032321
+checkmaxtol result -tol 77.938759360032321
checknbshapes result -shell 1
checkfreebounds result 4
checkfaults result a 5
sewing result $tol a
-checkmaxtol result -ref 0.00050030217895507807
+checkmaxtol result -tol 0.00050030217895507807
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.0092999999999999992
+checkmaxtol result -tol 0.0092999999999999992
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.0092999999999999992
+checkmaxtol result -tol 0.0092999999999999992
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.0092999999999999992
+checkmaxtol result -tol 0.0092999999999999992
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.0092999999999999992
+checkmaxtol result -tol 0.0092999999999999992
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 3.4850000977514799e-006
+checkmaxtol result -tol 3.4850000977514799e-006
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 4.9999999999999998e-007
+checkmaxtol result -tol 4.9999999999999998e-007
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.0001
+checkmaxtol result -tol 0.0001
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 1.0216478440458501e-005
+checkmaxtol result -tol 1.0216478440458501e-005
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 2.0400000000400001e-005
+checkmaxtol result -tol 2.0400000000400001e-005
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 1.7600000020000001e-005
+checkmaxtol result -tol 1.7600000020000001e-005
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 1.0246950765959601e-007
+checkmaxtol result -tol 1.0246950765959601e-007
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.00017424461414289899
+checkmaxtol result -tol 0.00017424461414289899
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.0043402717339514531
+checkmaxtol result -tol 0.0043402717339514531
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.010538211695240274
+checkmaxtol result -tol 0.010538211695240274
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 16
sewing result $tol a
-checkmaxtol result -ref 1.1000000000000001e-007
+checkmaxtol result -tol 1.1000000000000001e-007
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.4000000199999994e-006
+checkmaxtol result -tol 9.4000000199999994e-006
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.99827449814472002
+checkmaxtol result -tol 0.99827449814472002
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.0044259112825876966
+checkmaxtol result -tol 0.0044259112825876966
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.000773943070058072
+checkmaxtol result -tol 0.000773943070058072
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.0025000998179367383
+checkmaxtol result -tol 0.0025000998179367383
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 4
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.00090947237674449523
+checkmaxtol result -tol 0.00090947237674449523
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.000290392426468876
+checkmaxtol result -tol 0.000290392426468876
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 1.91680e+001
+checkmaxtol result -tol 1.91680e+001
checknbshapes result -shell 1
checkfreebounds result 3
checkfaults result a 6
sewing result $tol a
-checkmaxtol result -ref 71.039012505679182
+checkmaxtol result -tol 71.039012505679182
checknbshapes result -shell 1
checkfreebounds result 34
checkfaults result a 3
sewing result $tol a
-checkmaxtol result -ref 0.0001
+checkmaxtol result -tol 0.0001
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.0030000000000000001
+checkmaxtol result -tol 0.0030000000000000001
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 4.30764e+001
+checkmaxtol result -tol 4.30764e+001
checknbshapes result -shell 1
checkfreebounds result 28
checkfaults result a 11
sewing result $tol a
-checkmaxtol result -ref 3.77768e+001
+checkmaxtol result -tol 3.77768e+001
checknbshapes result -shell 1
checkfreebounds result 47
checkfaults result a 7
sewing result $tol a
-checkmaxtol result -ref 3.77768e+001
+checkmaxtol result -tol 3.77768e+001
checknbshapes result -shell 1
checkfreebounds result 47
checkfaults result a 7
sewing result $tol a
-checkmaxtol result -ref 122.47700432877426
+checkmaxtol result -tol 122.47700432877426
checknbshapes result -shell 1
checkfreebounds result 19
checkfaults result a 7
sewing result $tol a
-checkmaxtol result -ref 108.09508055264889
+checkmaxtol result -tol 108.09508055264889
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 13
sewing result $tol a
-checkmaxtol result -ref 103.91426175652668
+checkmaxtol result -tol 103.91426175652668
checknbshapes result -shell 1
checkfreebounds result 21
checkfaults result a 7
sewing result $tol a
-checkmaxtol result -ref 129.56600395440302
+checkmaxtol result -tol 129.56600395440302
checknbshapes result -shell 1
checkfreebounds result 53
checkfaults result a 30
sewing result $tol a
-checkmaxtol result -ref 0.00098148392391298302
+checkmaxtol result -tol 0.00098148392391298302
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.0001
+checkmaxtol result -tol 0.0001
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.0001
+checkmaxtol result -tol 0.0001
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 2.81877e+001
+checkmaxtol result -tol 2.81877e+001
checknbshapes result -shell 1
checkfreebounds result 15
checkfaults result a 1
sewing result $tol a
-checkmaxtol result -ref 0.0011000000000000001
+checkmaxtol result -tol 0.0011000000000000001
checknbshapes result -shell 1
checkfreebounds result 32
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 106.44142183190296
+checkmaxtol result -tol 106.44142183190296
checknbshapes result -shell 1
checkfreebounds result 39
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.0001
+checkmaxtol result -tol 0.0001
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.16631799443892401
+checkmaxtol result -tol 0.16631799443892401
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.00080381362011902678
+checkmaxtol result -tol 0.00080381362011902678
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.0001
+checkmaxtol result -tol 0.0001
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 5.98000000519996e-005
+checkmaxtol result -tol 5.98000000519996e-005
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.0001
+checkmaxtol result -tol 0.0001
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 3.5043984453518599e-005
+checkmaxtol result -tol 3.5043984453518599e-005
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 1.0669850423385499e-005
+checkmaxtol result -tol 1.0669850423385499e-005
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 1.0669850423385499e-005
+checkmaxtol result -tol 1.0669850423385499e-005
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 1.02048224000014e-005
+checkmaxtol result -tol 1.02048224000014e-005
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.0001
+checkmaxtol result -tol 0.0001
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.0001
+checkmaxtol result -tol 0.0001
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.000312825661963135
+checkmaxtol result -tol 0.000312825661963135
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 2.5033950095124698e-006
+checkmaxtol result -tol 2.5033950095124698e-006
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.0001
+checkmaxtol result -tol 0.0001
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.0093618530697934712
+checkmaxtol result -tol 0.0093618530697934712
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.0035001001080334497
+checkmaxtol result -tol 0.0035001001080334497
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 8
sewing result $tol a
-checkmaxtol result -ref 9.5608994683948008e-006
+checkmaxtol result -tol 9.5608994683948008e-006
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.0135272540005981
+checkmaxtol result -tol 0.0135272540005981
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.0001
+checkmaxtol result -tol 0.0001
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.000290392426468876
+checkmaxtol result -tol 0.000290392426468876
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 8.8386799426868199e-005
+checkmaxtol result -tol 8.8386799426868199e-005
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.00142875770638596
+checkmaxtol result -tol 0.00142875770638596
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 1.0000000000000001e-005
+checkmaxtol result -tol 1.0000000000000001e-005
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 2.0000000000000002e-005
+checkmaxtol result -tol 2.0000000000000002e-005
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 4.7800000020000003e-005
+checkmaxtol result -tol 4.7800000020000003e-005
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.00053560000001999996
+checkmaxtol result -tol 0.00053560000001999996
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 6.5358038191646697e-005
+checkmaxtol result -tol 6.5358038191646697e-005
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.0046389414325077802
+checkmaxtol result -tol 0.0046389414325077802
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.0029711398779358701
+checkmaxtol result -tol 0.0029711398779358701
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 8.4883104686090302e-005
+checkmaxtol result -tol 8.4883104686090302e-005
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.060767876617093201
+checkmaxtol result -tol 0.060767876617093201
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.00019999926881384401
+checkmaxtol result -tol 0.00019999926881384401
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.00019999926881384401
+checkmaxtol result -tol 0.00019999926881384401
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.0001
+checkmaxtol result -tol 0.0001
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.00053768255859426301
+checkmaxtol result -tol 0.00053768255859426301
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.00097000973422413405
+checkmaxtol result -tol 0.00097000973422413405
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.0076146762209044804
+checkmaxtol result -tol 0.0076146762209044804
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.0064020864359655098
+checkmaxtol result -tol 0.0064020864359655098
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.0071966806154171803
+checkmaxtol result -tol 0.0071966806154171803
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.00057527116071712399
+checkmaxtol result -tol 0.00057527116071712399
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.000102649552016514
+checkmaxtol result -tol 0.000102649552016514
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.0029050514540109301
+checkmaxtol result -tol 0.0029050514540109301
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.00744351212162117
+checkmaxtol result -tol 0.00744351212162117
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 1.0000000000000001e-005
+checkmaxtol result -tol 1.0000000000000001e-005
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 7.3849877949687495e-005
+checkmaxtol result -tol 7.3849877949687495e-005
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 5.0000000020000002e-005
+checkmaxtol result -tol 5.0000000020000002e-005
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 7.7279602250781197e-006
+checkmaxtol result -tol 7.7279602250781197e-006
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.27097139218059602
+checkmaxtol result -tol 0.27097139218059602
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 1.75025e+002
+checkmaxtol result -tol 1.75025e+002
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 1.57832e+000
+checkmaxtol result -tol 1.57832e+000
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.00047249600109400698
+checkmaxtol result -tol 0.00047249600109400698
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 1.12665115431084e-005
+checkmaxtol result -tol 1.12665115431084e-005
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.0001
+checkmaxtol result -tol 0.0001
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.0001
+checkmaxtol result -tol 0.0001
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 50.000075982060999
+checkmaxtol result -tol 50.000075982060999
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.0001
+checkmaxtol result -tol 0.0001
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.0001
+checkmaxtol result -tol 0.0001
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.0001
+checkmaxtol result -tol 0.0001
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 1.460000002e-005
+checkmaxtol result -tol 1.460000002e-005
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.000357806135894076
+checkmaxtol result -tol 0.000357806135894076
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.000129325309076528
+checkmaxtol result -tol 0.000129325309076528
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 50.000075982060999
+checkmaxtol result -tol 50.000075982060999
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.99827449814472002
+checkmaxtol result -tol 0.99827449814472002
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 164.05762248061501
+checkmaxtol result -tol 164.05762248061501
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.059303013637042101
+checkmaxtol result -tol 0.059303013637042101
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.00047249600109400698
+checkmaxtol result -tol 0.00047249600109400698
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.011092740551156799
+checkmaxtol result -tol 0.011092740551156799
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.0031479984377688502
+checkmaxtol result -tol 0.0031479984377688502
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.0036800000020000001
+checkmaxtol result -tol 0.0036800000020000001
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.00019999926881384401
+checkmaxtol result -tol 0.00019999926881384401
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 1.800000002e-005
+checkmaxtol result -tol 1.800000002e-005
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 4.9999999999999998e-007
+checkmaxtol result -tol 4.9999999999999998e-007
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 1.460000002e-005
+checkmaxtol result -tol 1.460000002e-005
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.00036648229568593901
+checkmaxtol result -tol 0.00036648229568593901
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 114.90666646781224
+checkmaxtol result -tol 114.90666646781224
checknbshapes result -shell 1
checkfreebounds result 4
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.0030000000000000001
+checkmaxtol result -tol 0.0030000000000000001
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.0001
+checkmaxtol result -tol 0.0001
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 0.0076505568825966704
+checkmaxtol result -tol 0.0076505568825966704
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 9.9999999999999995e-008
+checkmaxtol result -tol 9.9999999999999995e-008
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
sewing result $tol a
-checkmaxtol result -ref 1.180000002e-005
+checkmaxtol result -tol 1.180000002e-005
checknbshapes result -shell 1
checkfreebounds result 0
checkfaults result a 0
projects / occt-copy.git / commitdiff