msv [Mon, 25 Apr 2016 13:23:09 +0000 (16:23 +0300)]
Make the branch compilable
Do not merge it! as the customer needs no dependency of TKXCAF on visualization.
Just re-base it on head of parent branch if you need to compile.
msv [Mon, 20 Jun 2016 15:18:24 +0000 (18:18 +0300)]
Check status of BOPAlgo_Builder before using its result.
emv [Tue, 14 Jun 2016 13:13:39 +0000 (16:13 +0300)]
0027245: DRAW command to test binary persistence for shapes
- Added new static methods Read and Write in BinTools class to store/retrieve a shape in binary format.
- Added new draw commands "binsave" and "binrestore"
- Updated documantation with description of the new BinTools class methods and corresponding BRepTools class methods.
emv [Tue, 14 Jun 2016 13:13:39 +0000 (16:13 +0300)]
BRepOffset_Analyse::Perform() - Added processing of the cases when more than two faces share the same edge.
BRepOffset_MakeOffset - Added protection from the Infinite edges.
BOPAlgo_PaveFiller::MakeSplitEdges() - Remove PaveBlocks with same parameters on paves.
BOPAlgo_PaveFiller::PerformVE() - Added protection from edges with no PaveBlocks.
emv [Fri, 27 May 2016 10:33:38 +0000 (13:33 +0300)]
0027540: Run-to-run differences in the 3D Offset algorithm
Calculating the offset vertices by the superposition of intersection vertices
between pairs of edges (BRepOffset_Inter2d::FuseVertices()).
To obtain stable result when calculating the superposition of vertices
they are sorted (BOPTools_AlgoTools::MakeVertex()).
The support of vertices has been added in nexplode command.
msv [Fri, 20 May 2016 08:36:11 +0000 (11:36 +0300)]
0027521: Standard_ConstructionError when trying to use unifySameDom into a shape
Correct the algorithm in the function MergeEdges in ShapeUpgrade_UnifySameDomain.cxx so as to take into account the orientation of the next edge added to the chain.
Test cases for issue CR27521
emv [Fri, 20 May 2016 12:15:37 +0000 (15:15 +0300)]
1. BRepOffset_MakeOffset::UpdateValidEdges() - Correct saving of the new intersection edges.
2. BRepOffset_MakeOffset::RemoveInsideFaces() - Use faces consisting only of invalid edges
and rejected while building the splits of offset faces to find the faces to remove.
3. BRepOffset_MakeOffset::GetBoundsToUpdate() - Update all face's edges (not only valid)
by intersection with new intersection edges.
emv [Fri, 13 May 2016 12:46:57 +0000 (15:46 +0300)]
1. BRepOffset_MakeOffset::RemoveInsideFaces() - Making the procedure of checking for internal faces
to take into account the possibility of coincidence of the splits of the offset faces.
2. BRepOffset_MakeOffset::FindFacesToRebuild() - Making the set of faces for rebuilding include the
invalid faces with only valid splits left. But avoid those faces in intersections during their rebuilding.
msv [Fri, 29 Apr 2016 16:31:13 +0000 (19:31 +0300)]
0027454: Application hangs while opening a non-OCAF XML file
1) Add protection against accessing null pointer in PCDM_ReadWriter::FileFormat.
2) In LDOM_XmlReader::ReadRecord, take into account that the character '>' can have no special meaning (e.g., in a text), and we must read the data behind this character to complete the current tag reading. This treatment concerns the mode of work when myTagPerStep is true.
3) Create a test case of reading of XML file not related to OCAF document.
ibs [Thu, 14 Jan 2016 16:17:00 +0000 (19:17 +0300)]
0027077: OCAF: Implementation of streaming save/load (OCC26229) is incomplete/incorrect
XmlOcaf reading is non-seekable
// 1. Read method of XmlLDrivers_DocumentRetrievalDriver extended to read complete document (with "document" tag) in compatible mode (when reading is performed from file)
// 2. the empty statement removed
// 3. the description of LDOMPARSER::parse method extended
msv [Mon, 25 Apr 2016 10:00:05 +0000 (13:00 +0300)]
Porting the fix 26229 to OCCT 6.9.1
isk [Wed, 18 Nov 2015 12:49:08 +0000 (15:49 +0300)]
0026890: Foundation Classes, TKernel - define OSD_OpenStream for std::ifstream
ibs [Fri, 27 Nov 2015 10:03:25 +0000 (13:03 +0300)]
0026229: Add the possibility in OCAF to open/save a document from/to a stream object
TDocStd_Application class extended to open/save a document of XmlOcaf and BinOcaf format
from/to standard SEEKABLE stream object which should support SEEK functionality.
Open and SaveAs DRAW commands got new additional argument "-stream" to turn on using of stream functionality.
The main changes for BinOcaf format applied in:
FSD_BinaryFile class (static method using standard stream added)
BinLDrivers_DocumentRetrievalDriver and BinLDrivers_DocumentStorageDriver classes use standard stream object as an argument
The main changes for XmlOcaf format applied in:
LDOMParser and LDOM_XmlWriter classes use standard stream object as an argument
Unused class FSD_Archive and its siblings removed from MFC samples.
Conflicts:
src/BinLDrivers/BinLDrivers_DocumentRetrievalDriver.cxx
src/BinLDrivers/BinLDrivers_DocumentRetrievalDriver.hxx
src/BinLDrivers/BinLDrivers_DocumentStorageDriver.hxx
src/CDF/CDF_Application.hxx
src/CDM/CDM_Document.hxx
src/FSD/FSD_BinaryFile.cxx
src/FSD/FSD_BinaryFile.hxx
src/FSD/FSD_CmpFile.hxx
src/FSD/FSD_File.hxx
src/PCDM/PCDM.hxx
src/PCDM/PCDM_ReadWriter.hxx
src/PCDM/PCDM_Reader.hxx
src/PCDM/PCDM_RetrievalDriver.hxx
src/PCDM/PCDM_StorageDriver.hxx
src/PCDM/PCDM_Writer.hxx
src/Standard/Standard_Persistent.hxx
src/StdResource/XCAF
src/Storage/Storage_BaseDriver.hxx
src/Storage/Storage_Data.hxx
src/Storage/Storage_HeaderData.hxx
src/Storage/Storage_InternalData.hxx
src/Storage/Storage_Root.hxx
src/Storage/Storage_RootData.hxx
src/Storage/Storage_TypeData.hxx
src/TDocStd/TDocStd_Application.cxx
src/TDocStd/TDocStd_Application.hxx
src/XmlLDrivers/XmlLDrivers_DocumentRetrievalDriver.cxx
src/XmlLDrivers/XmlLDrivers_DocumentRetrievalDriver.hxx
src/XmlLDrivers/XmlLDrivers_DocumentStorageDriver.hxx
msv [Fri, 22 Apr 2016 14:10:11 +0000 (17:10 +0300)]
Fix build error: add dependence of TKVRML on TKV3d
stv [Thu, 11 Jun 2015 12:01:40 +0000 (15:01 +0300)]
Fix for XDE Draw building.
stv [Mon, 8 Jun 2015 11:50:58 +0000 (14:50 +0300)]
Fixes for partial compilation errors.
stv [Thu, 4 Jun 2015 07:22:43 +0000 (10:22 +0300)]
A reference to a non-existent package MPrsStd has been removed from TKPCAF
azn [Thu, 28 May 2015 13:02:31 +0000 (16:02 +0300)]
TKCAF has been separated on two parts:
- The sources which independent from visualization are remained in this TK.
- Visualisation dependencies are moved to the new TK: TKVCAF.
- Some dependencies which are connected with persistent objects (from other TK) have been corrected.
emv [Wed, 13 Apr 2016 21:34:45 +0000 (00:34 +0300)]
BRepOffset_Inter3d::ConnexIntByInt - Correct adding of the new section curves to the map of Ascendants/Descendants.
emv [Fri, 8 Apr 2016 07:31:15 +0000 (10:31 +0300)]
BRepOffset_MakeOffset::BuildSplitsOfFaces() - adding filters for found invalid faces to avoid unnecessary rebuilding of these faces.
msv [Fri, 1 Apr 2016 15:26:06 +0000 (18:26 +0300)]
0027315: UnifySameDomain leaves unmerged edges
Adapt the internal function MergeEdges to the case when on input it takes a set of edges constituting several connected chains.
msv [Mon, 21 Mar 2016 15:45:29 +0000 (18:45 +0300)]
0027332: Duplicate output from Draw Interpreter in cout in the debug function Draw_Eval
0027293: Add debug function to save a list of shapes into a compound
emv [Mon, 4 Apr 2016 12:37:55 +0000 (15:37 +0300)]
BRepOffset_MakeOffset::IntersectFaces() - Careful definition of the vertices to avoid while trimming the new edges.
emv [Fri, 1 Apr 2016 08:48:37 +0000 (11:48 +0300)]
BRepOffset_Inter3d::CompletInt - Make unique offset edges for each block of collinear edges from the initial shape.
msv [Tue, 22 Mar 2016 12:23:00 +0000 (15:23 +0300)]
0027082: UnifySameDomain must add internal edges where appropriate to resolve self-intersections
The new option AllowInternalEdges has been added in the class ShapeUpgrade_UnifySameDomain. It determines how the algorithm treats the situation when two faces can be merged together but they have connection with another face via the common edge.
With this option turned on, merging of such faces is not stopped, but the multiconnected edges are added to the merged face as INTERNAL edges.
By default it is false. In this mode such merging is forbidden, so the result shape will not contain any new INTERNAL edges.
The behavior of the algorithm has been changed so that it does not merge faces from different shells.
0027309: Result of UnifySameDomain has InvalidMultiConnexity error
The update of the set of boundary edges has been added for the case when faces containing milti-connected edges are excluded from merging.
emv [Mon, 28 Mar 2016 08:39:59 +0000 (11:39 +0300)]
BOPAlgo_PaveFiller::IsExistingPaveBlock - special treatment of linear edges coincidence.
emv [Fri, 25 Mar 2016 06:40:01 +0000 (09:40 +0300)]
Possibility to initialize the old offset algorithm with zero offset value.
emv [Fri, 25 Mar 2016 05:58:57 +0000 (08:58 +0300)]
Old implementation of the offset algorithm has been added alongside the new one (version from 28/10/2015).
New key has been added to the offsetparameter command to choose the version of the algorithm (old version is default).
emv [Fri, 18 Mar 2016 10:51:28 +0000 (13:51 +0300)]
BRepOffset_MakeOffset::IntersectFaces() - When one face is connected to several invalidity treat each invalidity of that face separately.
emv [Tue, 15 Mar 2016 14:14:31 +0000 (17:14 +0300)]
BRepOffset_MakeOffset::IntersectFaces() - When treating invalid faces intersect only the faces that are close to invalidity.
msv [Mon, 14 Mar 2016 09:24:49 +0000 (12:24 +0300)]
0026855: Draw commands to debug Boolean Operations Algorithm
emv [Wed, 9 Mar 2016 12:12:08 +0000 (15:12 +0300)]
Restore previous usage of the Volume Maker algorithm.
emv [Thu, 3 Mar 2016 13:36:38 +0000 (16:36 +0300)]
Extension on the 3d Offset algorithm for colliding cases to add support for new configurations of the shapes.
isn [Fri, 15 Jan 2016 13:22:32 +0000 (16:22 +0300)]
0027085: ShapeUpgrade_UnifySameDomain very large performance difference for seemingly similar shapes
Performance of the algorithm ShapeUpgrade_UnifySameDomain has been improved by avoiding of multiple calls of ShapeBuild_ReShape::Apply() method.
New test cases have been added.
Conflicts:
tests/bugs/heal/bug26219_1
msv [Fri, 25 Dec 2015 08:42:39 +0000 (11:42 +0300)]
0027021: TopExp::Vertices performance optimization
TopExp::Vertices optimized for sequential calls. BRep_Tool::Curve performance regression fixed. Update for fetching point done.
Test case for issue CR27021
msv [Wed, 28 Oct 2015 09:05:26 +0000 (12:05 +0300)]
1) The option to remove INTERNAL edges from the faces of the result of Offset operation has been added into Offset API.
By default these edges will be kept in the result.
To remove these edges make sure to set the corresponding flag to TRUE when initializing the Offset algo.
void BRepOffset_MakeOffset::Initialize(const TopoDS_Shape& S,
const Standard_Real Offset,
const Standard_Real Tol,
const BRepOffset_Mode Mode,
const Standard_Boolean Inter,
const Standard_Boolean SelfInter,
const GeomAbs_JoinType Join,
const Standard_Boolean RemoveIntEdges,
const Standard_Boolean Thickening)
2) Due to the small inaccuracy of the calculation of the bi-normal direction (direction inside the face on the edge) the criterion on the coincidence of these directions has been weakened.
3) Make the possibility to produce empty result in case of any invalidity (spikes, self-intersections, faces inversion) optional.
isn [Thu, 8 Oct 2015 07:32:41 +0000 (10:32 +0300)]
0026396: Taper API result differs run-to-run for identical inputs
- all data maps where shape used as a key have been replaced with indexed data maps. Now index used for iteration through this map instead of shape-key.
- new test have been added. This test allows to test stability of DraftAngle-algo.
emv [Thu, 8 Oct 2015 09:11:06 +0000 (12:11 +0300)]
Temporary patch to produce empty result in case of any invalidity (spikes, self-intersections, faces inversion).
aml [Wed, 9 Sep 2015 10:44:48 +0000 (13:44 +0300)]
0026656: ShapeFix_Face introduces extremely high vertex tolerance in the input shape
Added set of methods CopyVertex in BRepTools_ReShape. Usage of this non-modifying methods added in ShapeFix_Wire, ShapeFix_Edge.
Test case for issue 26656.
Test cases updated to the new behavior.
msv [Wed, 2 Sep 2015 15:40:41 +0000 (18:40 +0300)]
0026635: UnifySameDomain loses internal edges
-Treat internal edges in proper way to save them in the result
-Adopt test case to the actual state
pkv [Mon, 31 Aug 2015 08:21:41 +0000 (11:21 +0300)]
Memory leak in IntTools_Context::Hatcher
I. New features:
No new features
II.2. class BOPAlgo_WireSplitter
- method:
Geom2dHatch_Hatcher& IntTools_Context::Hatcher
(const TopoDS_Face& aF)
IntTools_SurfaceRangeLocalizeData& IntTools_Context::SurfaceData
(const TopoDS_Face& aF)
The memory allocation is provided using inner allocator of the object.
II. Modified entities:
packages:
IntTools
Issue for master:
0026616
pkv [Tue, 18 Aug 2015 07:06:11 +0000 (10:06 +0300)]
0026567: Exception in Boolean intersection command
Correcting the usage of NCollection_IncAllocator
emv [Thu, 27 Aug 2015 08:21:55 +0000 (11:21 +0300)]
Using local face tolerance for edges intersection.
ifv [Fri, 17 Jul 2015 06:43:21 +0000 (09:43 +0300)]
0026426: Draft angle algorithm modifies input argument + the result of the operation have very large tolerance values
This is not yet final version of the fix.
msv [Wed, 16 Sep 2015 12:25:23 +0000 (15:25 +0300)]
0026642: ShapeUpgrade_UnifySameDomain introduces extremely high vertex tolerances
0026099: Wrong result done by 2d intersection algorithm
Detection of intersection for almost parallel lines has been improved.
Test-case for issue #26099 and adjusting of test-case boolean volumemaker B6
Algorithm of computation of safe shift value along 2D-line (in order to distance between two points was less than tolerance) has been improved.
Correction of some test cases in accordance with their new behavior.
Test-case for issue #26642
msv [Wed, 16 Sep 2015 12:07:28 +0000 (15:07 +0300)]
Add directories build* and install to git ignore list.
nbv [Thu, 10 Sep 2015 13:42:29 +0000 (16:42 +0300)]
Porting the fix of 26099 bug
pdn [Tue, 8 Sep 2015 15:26:16 +0000 (18:26 +0300)]
0026664: Triangulating a very small polygon fails
Parameter for adaptive computation of minimal 2D meshing precision added
jgv [Fri, 21 Aug 2015 14:32:12 +0000 (17:32 +0300)]
Fix of bug 26572 for issue #12
msv [Fri, 24 Jul 2015 09:26:53 +0000 (12:26 +0300)]
0026466: UnifySameDomain creates invalid result shape from valid input shape
oan [Wed, 15 Jul 2015 11:57:36 +0000 (14:57 +0300)]
0026407: BRepMesh_Delaun should not take into account frontier edges on first pass of algorithm
Correction of new vertices insertion: remove all triangles shot by point even if they contain frontier edges in order to prevent cases of free edge glued with frontier;
findNextPolygonLink: choose link with opposite direction to previous one as the last resort in case if the is no another option;
Enlarge bounding boxes by Precision::PConfusion() in order to not to miss possible intersections;
Return NoIntersection in case of end point touch and isConsiderEndPointTouch flag is not set.
emv [Fri, 10 Jul 2015 09:52:58 +0000 (12:52 +0300)]
Corrections in splitting faces and making shells functions.
emv [Tue, 7 Jul 2015 11:18:28 +0000 (14:18 +0300)]
3D Offset algorithm extension for the cases with the shapes having the faces connected only by the VERTEX.
emv [Tue, 30 Jun 2015 09:22:42 +0000 (12:22 +0300)]
Fix for correct shells splitting when building solids.
msv [Wed, 24 Jun 2015 06:58:27 +0000 (09:58 +0300)]
Additional fix to improve robustness.
msv [Tue, 23 Jun 2015 15:01:39 +0000 (18:01 +0300)]
Fix the problem when merged edges have different location.
isn [Fri, 29 May 2015 07:43:24 +0000 (10:43 +0300)]
CR26219_2
ShapeUpgrade_UnifySameDomain fails with StdFail_NotDone exception
emv [Wed, 17 Jun 2015 08:30:10 +0000 (11:30 +0300)]
Treatment of the shells with free edges has been changed to keep the faces with internal edges.
emv [Thu, 4 Jun 2015 07:53:22 +0000 (10:53 +0300)]
0025926: 3D offset in mode "Complete" with Join type "Intersection"
3D offset algorithm extension for degenerate (colliding) cases.
pkv [Thu, 14 May 2015 06:21:13 +0000 (09:21 +0300)]
0026224: Wrong result obtained by Common operator.
I. New features:
No new features.
II. Changes:
II.1. class BOPTools_AlgoTools2D
- method:
Standard_Integer BOPTools_AlgoTools2D::AttachExistingPCurve
(const TopoDS_Edge& aE2,
const TopoDS_Edge& aE1,
const TopoDS_Face& aF,
const Handle(IntTools_Context)& aCtx)
has been changed.
The treatment of the curves that need to be reversed has been modified
taking into account reversed parameter
III. Modified entities:
packages:
BOPTools
emv [Thu, 14 May 2015 09:39:16 +0000 (12:39 +0300)]
0026218: Wrong result done by General Fuse algorithm
class BOPAlgo_PaveFiller
1. method
void BOPAlgo_PaveFiller::MakeBlocks()
Update of FaceInfo IN information before filling the maps.
2. methods
void BOPAlgo_PaveFiller::UpdateFaceInfo
(BOPDS_DataMapOfPaveBlockListOfPaveBlock& theDME,
const BOPCol_DataMapOfIntegerInteger& theDMV)
void BOPAlgo_PaveFiller::ProcessExistingPaveBlocks
(const Standard_Integer theInt,
const BOPDS_IndexedMapOfPaveBlock& aMPBOnIn,
const BOPCol_DataMapOfIntegerListOfInteger& aDMBV,
BOPDS_IndexedDataMapOfShapeCoupleOfPaveBlocks& aMSCPB,
BOPCol_DataMapOfShapeInteger& aMVI,
BOPDS_MapOfPaveBlock& aMPB)
Small changes in treatment of existing pave blocks when making new ones from intersection curves.
ski [Fri, 8 May 2015 09:54:51 +0000 (12:54 +0300)]
0025490: Error appears trying to start QT OCCT sample
Separate msvc.bat files were created for each qt sample to avoid errors.
vpa [Fri, 8 May 2015 10:44:02 +0000 (13:44 +0300)]
0026139: AIS_InteractiveContext::Display performance regression
Regression with VIS tests in release mode was fixed
apn [Thu, 7 May 2015 08:31:24 +0000 (11:31 +0300)]
0026194: Sometimes "testgrid" command runs every test many times
Added check for equal test directories in variable CSF_TestScriptsPath.
bugmaster [Thu, 7 May 2015 12:45:47 +0000 (15:45 +0300)]
Incrementation of OCCT version up to 6.9.0
vpa [Thu, 7 May 2015 15:39:36 +0000 (18:39 +0300)]
0026139: AIS_InteractiveContext::Display performance regression
NCollection_Sequence in SelectMgr_SensitiveEntitySet was replaced by indexed data map
dbp [Thu, 7 May 2015 15:20:27 +0000 (18:20 +0300)]
0026029: Visualization - Poor performance of connected objects
Fix performance issue with SelectMgr_SelectableObjectSet.
apn [Thu, 7 May 2015 14:32:58 +0000 (17:32 +0300)]
Update of unstable Boolean test cases
abv [Thu, 7 May 2015 05:53:38 +0000 (08:53 +0300)]
0026146: Visualization, Select3D_ISensitivePointSet - eliminate crash when clearing selections [only with TBB]
Remove classes Select3D_ISensitivePointSet and Select3D_BoundarySensitivePointSet; use Select3D_SensitivePoly directly for boundary selection.
Make last argument in Select3D_SensitiveFace non-default to ensure that value is always explicitly specified by the caller.
Inherit SelectMgr_FrustumBuilder from Standard_Transient to use normal Handle instead of NCollection_Handle.
Add test case bugs/vis/bug26146.
vpa [Thu, 7 May 2015 15:53:21 +0000 (18:53 +0300)]
0026147: Visualization - restore the ability to pick only fully included objects in rectangular selection
2 modes of rectangular selection are available: inclusion-only and overlap-allowing;
The modes can be switched using method AllowOverlapDetection from StdSelect_ViewerSelector3d;
BVH for sensitive entities now builds if there is more than max number of leafs in collection;
Added option -allowoverlap to command vselect;
Interactive rectangular selection in Draw is now available in 2 modes:
- if the user starts selection from upper corners, only fully included objects will be selected;
- if the user starts selection from lower corners, both partially and fully overlapped objects will be selected.
apl [Thu, 7 May 2015 12:00:23 +0000 (15:00 +0300)]
0025760: Visualization - precision factor added to ZNear, ZFar in method ZFitAll() of Graphic3d_Camera is not enough
Partial fix: increased epsilon to value reported in #
0025670
apn [Thu, 7 May 2015 12:33:10 +0000 (15:33 +0300)]
0026191: Different behavior of "bugs moddata_3 bug23471" test script on Windows and Linux platform
Deleted variable "res" which appears during loading draw
vpa [Wed, 6 May 2015 12:35:36 +0000 (15:35 +0300)]
0026159: Visualization - revise tolerance implementation for selection
Max tolerance is now applied to all objects and entities by default;
if there is an entity with a lower tolerance, selecting frustum will be recalculated for it.
The ability to set sensitivity for each entity individually is moved to protected section of SelectBasics_SensitiveEntity
SetPixelTolerance from AIS_InteractiveContext now sets custom tolerance that is applied to all sensitives.
Added -unset option to vselprecision command to disable custom tolerances.
Test case for issue #26159
kgv [Wed, 6 May 2015 13:05:47 +0000 (16:05 +0300)]
0026165: Visualization, TKOpenGl - fix FBO blitting on some mobile devices
OpenGl_Texture::Init() - initialize FBO textures with GL_TEXTURE_WRAP_ set to GL_CLAMP_TO_EDGE,
since some devices do not support GL_REPEAT (which is default) in such combination.
OpenGl_Font::createTexture() - define texture parameters explicitly.
OpenGl_FrameBuffer::Init() create Depth render buffer object instead of texture
on devices which do not support GL_DEPTH24_STENCIL8.
mkv [Thu, 7 May 2015 13:25:02 +0000 (16:25 +0300)]
0025271: Wrong result obtained by solid classifier algorithm
Shape name was corrected
ski [Wed, 6 May 2015 11:22:49 +0000 (14:22 +0300)]
0025825: Draw Harness, XSDRAWSTLVRML - drop command tovrml and XSDRAWSTLVRML_ToVRML
Command tovrml was eliminated.
apl [Wed, 6 May 2015 09:06:54 +0000 (12:06 +0300)]
0026172: Visualization, AIS_LocalContext - locally selected object should not stay in the viewer after deactivation in the local context
Fix for AIS_LocalContext::ClearOutdatedSelection()
Added test case bugs/vis/bug26172
nbv [Thu, 7 May 2015 13:14:09 +0000 (16:14 +0300)]
0025890: Intersection algorithm produces curves overlaped
1. Function IntImp_Int2S::ChangePoint() has been added (see cdl for detail information).
2. Attempt to forbidden break WLine if it goes along surface boundary.
Code optimization.
2nd optimization
Test case for issue CR25890
mkv [Wed, 6 May 2015 15:45:31 +0000 (18:45 +0300)]
0025737: GCPnts_TangentialDeflection does not produce points to approximate a knee
abv [Wed, 6 May 2015 03:20:29 +0000 (06:20 +0300)]
0026182: Calling ShapeFix_FixSmallFace.RemoveSmallFaces() always leads to stack overflow
Unused methods RemoveSmallFaces() and SplitFaces() are removed.
kgv [Thu, 30 Apr 2015 14:19:19 +0000 (17:19 +0300)]
0026177: Coding rules - eliminate -Wdeprecated-register CLang warnings
kgv [Thu, 30 Apr 2015 10:26:01 +0000 (13:26 +0300)]
0026167: Coding rules - eliminate -Wlogical-not-parentheses CLang warnings in GeomToStep
apl [Tue, 28 Apr 2015 09:11:10 +0000 (12:11 +0300)]
0026155: TNaming, CurrentShape: order of shapes in Modification compound is unpredictable
CurrentShape(): replace TopTools_MapOfShapes with TopTools_IndexedMapOfShape
Added case: tests/bugs/caf/bug26155
msv [Thu, 30 Apr 2015 09:37:07 +0000 (12:37 +0300)]
0026148: BRep_Tool::IsClosed failed to judge a closed edge on Poly_Triangulation.
The method signature has been changed by adding an argument TopLoc_Location.
ski [Tue, 5 May 2015 16:42:21 +0000 (19:42 +0300)]
0026145: Geometry Sample crashes
Unacceptable usage of quantity coefficient was removed.
solomin_s [Wed, 6 May 2015 14:05:39 +0000 (17:05 +0300)]
0026128: Visualization, TKOpenGl - fix misprint in external GLX context initialization
OpenGl_Window, GLX - push warning about missing caps in window Visual.
Allow initialization of alien GLX context.
Correction of misprinting
vpa [Thu, 30 Apr 2015 15:08:55 +0000 (18:08 +0300)]
0026121: Visualization - revise implementation of point sets used in Select3D_SensitiveFace
Code duplication was eliminated by removing constructors with handle input arrays
nbv [Wed, 6 May 2015 13:58:48 +0000 (16:58 +0300)]
0026118: Implement FastSewing algorithm
1. Develop special sewing algorithm.
2. DRAW-command "fastsewing" has been created (see help for detail information).
3. BRepLib::EnsureNormalConsistency() method has been added (see help for detail information).
4. DRAW-command correctnormals has been created (see help for detail information).
Test cases for this issue.
Correction of elapsed time in test-cases
mkv [Thu, 30 Apr 2015 15:45:09 +0000 (18:45 +0300)]
0026010: [OCCT 6.8.0 regression] BRepFeat_SplitShape returns invalid shapes
mkv [Thu, 30 Apr 2015 15:03:47 +0000 (18:03 +0300)]
0025844: Command checkshape does not detect error for case when degenerated edge does not contain geometric representation.
ibs [Fri, 16 Jan 2015 09:15:11 +0000 (12:15 +0300)]
0025713: CMake configuring procedure should allow to build OCCT as static libraries
BUILD_LIBRARY_TYPE variable added
ysn [Thu, 30 Apr 2015 12:58:34 +0000 (15:58 +0300)]
0025390: Redesign of Technical Overview
Technical overview refactored; text duplicating information contained in user guides removed.
Some images are regenerated for better presentation.
Problems with formatting and section tags corrected in user guides.
mkv [Thu, 30 Apr 2015 14:09:43 +0000 (17:09 +0300)]
0025050: Shape can not be stored to VRML format
isk [Tue, 5 May 2015 08:06:29 +0000 (11:06 +0300)]
0022785: Draw Harness - add possibility to remove a text drawn by the command vdrawtext
AIS_TextLabel - new public class to display simple text labels (based on MyTextClass private class from Draw Harness).
ViewerTest::Display() - add more reliable replacement for VDisplayAISObject() with no viewer update flag.
vdrawtext command redesign:
- Use new AIS_TextLabel class instead of private MyTextClass.
- Take object name and allow to clear labels from the Viewer.
- Use parameter name + parameter value syntax instead of strict list of mandatory arguments.
- Use [0; 1] range for colors and accept names.
- Drop redundant argument "isMultiByte".
- Support argument -noupdate to skip Viewer update.
Update test cases to new syntax of vdrawtext.
apv [Tue, 5 May 2015 12:31:21 +0000 (15:31 +0300)]
Modification due to behavior changes after integration for issues CR26138 and CR24923
bugmaster [Tue, 5 May 2015 11:31:07 +0000 (14:31 +0300)]
Update overview for OCCT 6.9.0
apn [Thu, 23 Apr 2015 09:32:53 +0000 (12:32 +0300)]
0025670: Incorrect sprops/vprops/lprops check in heal drop_small_solids test cases
Procedure cmpprops in tests/heal/drop_small_solids/end is modified to correctly access top-level variables
ika [Thu, 30 Apr 2015 14:04:07 +0000 (17:04 +0300)]
0026138: Problems with writing periodic BSplines into IGES
Remove making BSpline surfaces rational,
Add shifting of pcurves on periodic BSpline surfaces,
Add cutting of segment from such surfaces.
Add additional check for need of make segment
Update of test-cases according to the new behavior
drazmyslovich [Thu, 30 Apr 2015 13:41:54 +0000 (16:41 +0300)]
0024923: BRepMesh_CircleTool produces bad circles
Calculate radius of circumcircle as maximum difference between its center and vertices or reference triangle.
Draw test command OCC25547 has been implemented.
Small optimizations for speed.
Update of test-cases according to the new behaviour
Update of test-cases in group mesh
apn [Thu, 30 Apr 2015 11:59:15 +0000 (14:59 +0300)]
0026021: Integration boolean test cases
Added subgroups volumemaker, gdml_private and gdml_public
Moved scripts from public repository ti test cases
Added more TODOs to unstable test cases
Small corrections for unstable test cases