kgv [Thu, 24 Jul 2014 09:01:40 +0000 (13:01 +0400)]
0025090: Visualization - drop Graphic3d_Group::MyIsEmpty flag
Small correction for issue CR25090
duv [Thu, 24 Jul 2014 08:56:42 +0000 (12:56 +0400)]
0024872: Support of emission color in Phong shader and ray-tracing
Test cases for issue CR24872
mkv [Wed, 16 Jul 2014 11:08:44 +0000 (15:08 +0400)]
0023191: Visualization - small objects displayed with visual artifacts
Test case for issue CR23191
bugmaster [Fri, 18 Jul 2014 09:35:24 +0000 (13:35 +0400)]
Update mfc sample after integration issue
0025071
bugmaster [Fri, 18 Jul 2014 08:36:39 +0000 (12:36 +0400)]
Adjusting testing case for debug mode
mkv [Thu, 17 Jul 2014 08:23:20 +0000 (12:23 +0400)]
Correction of testing cases for issue CR24979
kgv [Sat, 12 Jul 2014 09:31:17 +0000 (13:31 +0400)]
0025074: Intf_Polygon2d - add virtual destructor
abv [Tue, 8 Jul 2014 12:11:16 +0000 (16:11 +0400)]
0025057: Message_Algorithm fails to find messages defined for base class
New method HasMsg() is added in Message_MsgFile class to check if message with given key is registered.
That method is used in Message_Algorithm to check if message is defined on given level of class hierarchy.
Generation of error message in Message_MsgFile::Msg() is revised: now it includes a message key and gets added to the registry, to avoid re-generation in case of multiple requests.
Access to message registry maintained by the Message_MsgFile class is protected from concurrent access by mutex.
mkv [Thu, 17 Jul 2014 09:37:15 +0000 (13:37 +0400)]
0025080: [Regression] Problem of meshing narrow face
Test case for issue CR25080
dbp [Tue, 15 Jul 2014 08:11:24 +0000 (12:11 +0400)]
0024979: Optimize Extrema_GenExtCS
The patch changes the algorithm of choosing the initial approximation for Newton's method. Instead of searching for a point on the fine shifted grid, the algorithm performs initial search for candidate points in the original coarse grid (which is cached in new version). After that particle swarm optimization (PSO) is used to localize the global minimum. This algorithm optimizes a problem by having a population of candidate solutions ("particles"), and moving these particles around in the search-space according to simple mathematical formula over the particle's position and velocity. Each particle's movement is influenced by its local best known position but, is also guided toward the best known positions in the search-space, which are updated as better positions are found by other particles. This strategy has reported good results in solving complex global optimization problems.
Current patch implements initial version of PSO for using in Extrema_GenExtCS class. Typically new approach allows to reduce the number of evaluations by 5-10 times. There are only few cases there the numbers of evaluations are comparable.
vro [Wed, 11 Jun 2014 08:19:44 +0000 (12:19 +0400)]
0025003: Selection of a face fails if sensitive triangulation is computed with interior flag = false
A check on length is added to avoid manipulation with a vector of null length.
aml [Thu, 17 Jul 2014 09:50:51 +0000 (13:50 +0400)]
0025058: Regression of performance of BRepExtrema_ExtCC (1000 times slower)
Added initial values approximation to improve performance.
Local optimization start coefficient fixed.
Test case for issue CR25058
duv [Thu, 17 Jul 2014 09:46:53 +0000 (13:46 +0400)]
0024996: Visualization - newly displayed objects are clipped until first
camera movement
AutoZFit operation now may be applied on Visual3d_View level.
Visual3d_View tracks Graphic3d_Structure updates and call AutoZFit within
Visual3d_View::Redraw if necessary.
In order to get AutoZFit functionality on Visual3d_View level ZfitAll
method moved from V3d_View into Graphic3d_Camera. AutoZFit method and
AutoZFitMode flag now part of Visual3d_View.
Test case for issue CR24996
san [Thu, 17 Jul 2014 09:39:22 +0000 (13:39 +0400)]
0025071: Visualization - Inconsistent deflection values used by AIS_Shape
Fix misprint
Small correction for issue CR25071
kgv [Thu, 17 Jul 2014 09:34:05 +0000 (13:34 +0400)]
0025075: BRepMesh - eliminate new x86_64 compiler warnings
BRepMesh - fix compilation without TBB support
Code style
mkv [Wed, 16 Jul 2014 11:06:12 +0000 (15:06 +0400)]
0024901: Visualization - Incorrect area filled with capping color
Test case for issue CR24901
mkv [Wed, 16 Jul 2014 11:11:41 +0000 (15:11 +0400)]
024539: Visualization (new camera) - small objects displayed with visual artifacts
Test case for issue CR24539
skv [Wed, 9 Jul 2014 10:53:35 +0000 (14:53 +0400)]
0025064: TCollection modification for Salome porting
kgv [Thu, 10 Jul 2014 05:25:59 +0000 (09:25 +0400)]
0025066: Visualization - fit all is malfunction when bounding box is set through Graphic3d_Group::SetMinMaxValues()
Ensure bounding box is marked as valid.
san [Mon, 14 Jul 2014 08:10:06 +0000 (12:10 +0400)]
0025008: wrong PPM generated in mage_AlienPixMap::savePPM
duv [Fri, 11 Jul 2014 12:39:29 +0000 (16:39 +0400)]
0025017: Visualization - materials in Raytracing are messed up
duv [Thu, 17 Jul 2014 07:31:29 +0000 (11:31 +0400)]
0025063: Visualization - 2D objects are not displayed at some camera positions
Minimum thresolds introduced to zfit operation and to camera SetDistance() method.
Test case for issue CR25063
ifv [Thu, 17 Jul 2014 07:26:23 +0000 (11:26 +0400)]
0025028: BRepAlgo::ConcatenateWire raises an exception
Test case for issue CR25028
apl [Thu, 10 Jul 2014 09:06:13 +0000 (13:06 +0400)]
0025060: Capping breaks highlighting of shaded AIS_Shape with displayed edges
Capping algorithm - remember and restore depth function mode.
kgv [Thu, 3 Jul 2014 06:47:42 +0000 (10:47 +0400)]
0023814: Drop plugin interface for Graphic3d_GraphicDriver instantiation
Drop Graphic3d_GraphicDriver::Begin() and ::End() methods.
Initialization is performed within driver constructor.
Drop dummy argument for Graphic3d_GraphicDriver constructor with library name.
Display connection now should be set instead
Drop Graphic3d::InitGraphicDriver() function and Graphic3d.hxx header.
Application code should explicitly link against TKOpenGl toolkit and instantiate OpenGl_GraphicDriver class.
Drop MetaGraphicDriverFactory implementation within TKOpenGl.
kgv [Tue, 8 Jul 2014 15:23:47 +0000 (19:23 +0400)]
0025059: Visualization - mutable transformed structure still invalidates BVH tree for culling
Take into account IsMutable flag within Visual3d_View::ReCompute() method.
bugmaster [Fri, 11 Jul 2014 09:42:53 +0000 (13:42 +0400)]
correction of misprints
apn [Fri, 11 Jul 2014 08:29:19 +0000 (12:29 +0400)]
Modified cpulimits in test cases in Debug mode.
Modified test case mesh/data/standard/V4 for issue 24968.
oan [Fri, 11 Jul 2014 07:02:27 +0000 (11:02 +0400)]
Fix compilation errors for mfc samples.
ika [Thu, 10 Jul 2014 10:54:56 +0000 (14:54 +0400)]
0024990: StepWrite fails on the attached shape
Add check to avoid exception
Test cases for issue CR24990
abv [Tue, 8 Jul 2014 11:08:46 +0000 (15:08 +0400)]
0024335: Draw Harness - support grids list in testgrid command
Arguments of command testgrid specifying test group and grid to be executed now can be a list of file masks (space or comma separated).
One more optional argument added allowing to specify masks for test cases to be run.
mkv [Mon, 7 Jul 2014 12:06:00 +0000 (16:06 +0400)]
0022978: Shading for a pipe shape is wrong
Test case for issue CR22978
oan [Thu, 10 Jul 2014 10:51:15 +0000 (14:51 +0400)]
0025039: Improvement of code structure of general and supporting tools implemented in BRepMesh
Removed CDL declarations; Data collections are replaced by NCollections; Small code refactoring.
Remove definition of BRepMesh class. Code refactoring of BRepMesh_IncrementalMesh.
Function BRepMesh_Write storing BRepMesh_DataStructureOfDelaun to BRep file is added for debug needs.
Static method BRepMesh_GeomTool::IntLinLin has been added to eliminate code duplications in BRepMesh_Dealun and BRepMesh_CircleTool.
BRepMesh_CircleTool simplified method to find circumcircle.
Fix merging conflicts
Remove redundant function
Fix compilation warning on MacOS
Revert changes occurred during rebase
Resolved merging conflicts
Use parallel flag with BRepMesh_FastDiscret
Test cases for issue CR25039_2
Roman Lygin [Thu, 10 Jul 2014 10:47:20 +0000 (14:47 +0400)]
0024925: Enabling OCAF persistence without setting environment variables
Add test case bugs/caf/bug24925
Merging with current master IR-2014-07-03
kgv [Thu, 10 Jul 2014 10:45:21 +0000 (14:45 +0400)]
0025052: Visualization - activation of all Clipping Planes within driver limit leads to broken planes management
Aspect_GenId::Available(), include size of the queue with recently freed identifiers
Aspect_GenId.cxx - remove tabulation symbols
Test cases for issue CR25052
dbv [Thu, 10 Jul 2014 10:43:56 +0000 (14:43 +0400)]
0025010: Use AIS_ColoredShape for display of XCAF documents
Added methods HasUIsoAspect and HasVIsoAspect to AIS_Drawer
XCAFPrs_AISObject has been converted to non-cdl class
XCAFPrs_AISObject now inherits from AIS_ColoredShape
XCAFPrs_AISObject::Compute method has been rewritten in accordance with the new inheritance.
Regression fix
ink [Thu, 10 Jul 2014 10:42:12 +0000 (14:42 +0400)]
0024876: Add protection of shapes against modification of geometry
Added flag "locked" for protection of geometric data in the shapes (including tolerances).
Modification test case to avoid regression.
oan [Thu, 10 Jul 2014 10:40:36 +0000 (14:40 +0400)]
0024968: Impove BRepMesh_Classifier to cope with intersection of huge number of wires
BRepMesh_Classifier: Two-pass approach for intersection check with possibility to run it in parallel mode.
First pass - bounding boxes of segments are checked for overlapping;
Second pass - intersection point is calculated in case if overlapping is detected.
Make NCollection_UBTree::ChangeLastNode() exported due to compilation error on Linux platform.
Reason: method does not depend on template parameters, so it should be available.
Revert previous change and try to use another trick for Linux
Fix compilation warning on MacOS: remove redundant constant
Fix regressions: do not consider insignificant loops in case of self intersections on the same wire.
More sugar solution for compilation errors on NCollection_EBTree on Linux
Test cases for issue CR24968
dbv [Fri, 4 Jul 2014 09:14:32 +0000 (13:14 +0400)]
0025051: Compilation issues on OS X 10.6.8
Added define to prevent inclusion of system glext.h on Mac OS X 10.6.8
kgv [Thu, 3 Jul 2014 07:09:48 +0000 (11:09 +0400)]
0025047: Visualization - public methods of OpenGl_AspectFace, OpenGl_AspectLine and OpenGl_AspectMarker classes are not exported
bugmaster [Wed, 9 Jul 2014 07:05:23 +0000 (11:05 +0400)]
Increment version of OCCT up to 6.7.3
bugmaster [Fri, 4 Jul 2014 09:33:20 +0000 (13:33 +0400)]
Adding solution and project for VC++ 2010
apn [Fri, 4 Jul 2014 08:42:15 +0000 (12:42 +0400)]
Modified test cases in de group according to new behavior in issues 24983 and 24958
kgv [Fri, 4 Jul 2014 06:29:09 +0000 (10:29 +0400)]
Do not include removed headers from package Aspect in samples (
0025038)
apn [Thu, 3 Jul 2014 13:23:56 +0000 (17:23 +0400)]
Update of header of files in context of License text
razmyslovich [Thu, 3 Jul 2014 13:16:07 +0000 (17:16 +0400)]
0024983: For the incorrect seam edge in STEP file no fix is provided
fix the notched edges twice per face - before checking for missing seam and after
Test case correction for issue CR24983
Add check for invalid Surface of linear extrusion (with basis curve - line and extrusion direction parallel to this line) during converting STEP surface
Small corrections of test cases for issue CR24983
razmyslovich [Thu, 3 Jul 2014 13:13:17 +0000 (17:13 +0400)]
0024958: Numerous ShapeFix_IntersectionTool code fixes
Optimize periodic normalization.
not needed split edge, if one of parts is too small
Small corrections of test cases for issue CR24958_2
apn [Thu, 3 Jul 2014 12:09:39 +0000 (16:09 +0400)]
Modified test case for issue 23753
apv [Thu, 3 Jul 2014 12:07:28 +0000 (16:07 +0400)]
Modified test case for issue 23698
aml [Thu, 3 Jul 2014 12:00:36 +0000 (16:00 +0400)]
0025004: Extrema curve/curve incorrect result
Fixed bug in extrema clustering algorithm.
Tolerances changing is available now.
Testcase with Branin function added.
Test cases for issue CR25004
aml [Thu, 3 Jul 2014 11:54:46 +0000 (15:54 +0400)]
0024817: Can not sew two circular faces in non-manifold mode
IndRef parameter usage fixed. Obsolete code deleted.
Test case for issue CR24817
osa [Thu, 3 Jul 2014 11:49:48 +0000 (15:49 +0400)]
0024819: TKOpenGl - extend the ray-tracing core by visualization of lines, text and point sprites
OpenGl_GraphicDriver::Redraw() - do not recompute structures more than required
OpenGl_Workspace::Raytrace() - bind proper FBO before clearing it
Visual3d_View::Redraw() - perform automatic 2nd redraw on device lost
kgv [Mon, 30 Jun 2014 09:04:55 +0000 (13:04 +0400)]
0025040: Visualization - capping plane is drawn at wrong position when created by copy
OpenGl_CappingPlaneResource - use -1 instead of 0 as default uninitialized modification counter.
kgv [Sun, 29 Jun 2014 10:46:11 +0000 (14:46 +0400)]
0025038: Visualization - remove unused classes from package Aspect
aba [Thu, 3 Jul 2014 11:44:13 +0000 (15:44 +0400)]
0025034: Highlighted dimension objects are not in Detected list of AIS_InteractiveContext:
Detected sequence in local ind interactive contexts is filled with interactive objects, not with AIS_Shape only.
bugmaster [Fri, 27 Jun 2014 12:23:13 +0000 (16:23 +0400)]
Update of header of files in context of License text
bugmaster [Fri, 27 Jun 2014 11:43:50 +0000 (15:43 +0400)]
Removing non ascii characters
vpa [Thu, 26 Jun 2014 15:00:57 +0000 (19:00 +0400)]
0025036: Compilation errors in occt qt Voxel sample
Graphic3d_CBounds was replaced by Graphic3d_BndBox4f
mkv [Fri, 27 Jun 2014 11:21:44 +0000 (15:21 +0400)]
Adjusting testing cases for debug mode
emv [Thu, 26 Jun 2014 09:03:35 +0000 (13:03 +0400)]
0025002: Wrong result done by Boolean Operation algorithm
class IntTools_FaceFace
method
static Standard_Boolean DecompositionOfWLine(const Handle(IntPatch_WLine)& theWLine,
const Handle(GeomAdaptor_HSurface)& theSurface1,
const Handle(GeomAdaptor_HSurface)& theSurface2,
const TopoDS_Face& theFace1,
const TopoDS_Face& theFace2,
const IntTools_LineConstructor& theLConstructor,
const Standard_Boolean theAvoidLConstructor,
IntPatch_SequenceOfLine& theNewLines,
Standard_Real& theReachedTol3d,
const Handle(IntTools_Context)& aContext)
Correct treatment of WLines with only one point before or after the boundary point.
Test case for issue CR25002
vsr [Fri, 20 Jun 2014 07:35:25 +0000 (11:35 +0400)]
0024985: Control of maximum degree and number of segment in the Pipe Shell algorithm
Fix merge problem: pass myMaxDegree and myMaxSegments to BRepFill_Sweep algorithm
anv [Tue, 24 Jun 2014 08:00:13 +0000 (12:00 +0400)]
0025031: Incorrect initialization function call
Incorrect function call removed
pkv [Thu, 26 Jun 2014 09:00:17 +0000 (13:00 +0400)]
0024157: Parallelization of assembly part of BO
The branch CR24157_12 deals with the parallelization of building the solids in case of lot internal faces.
Test case for issue CR24157
emv [Thu, 26 Jun 2014 08:58:42 +0000 (12:58 +0400)]
0025019: Command "bsection" in Test Harness with flag build pcurve on second shape works slowly.
class IntTools_FaceFace
method
void IntTools_FaceFace::Perform(const TopoDS_Face& aF1,
const TopoDS_Face& aF2)
Change the approximation flags according to the order of faces.
Test case for issue CR25019
vpa [Fri, 20 Jun 2014 07:26:14 +0000 (11:26 +0400)]
0024307: TKOpenGl - efficient culling of large number of presentations
Implement SAT intersection tests and frustum culling algorithm using BVH trees.
New Draw command vfrustumculling to manage frustum culling.
Add test cases bugs/vis/bug24307_1 and bugs/vis/bug24307_2.
Remove CALL_DEF_BOUNDBOX and CALL_DEF_BOUNDS.
kgv [Thu, 26 Jun 2014 08:50:30 +0000 (12:50 +0400)]
0025027: Visualization - 2D layer viewport is updated incorrectly on resize
Test case for issue CR25027
kgv [Thu, 19 Jun 2014 14:15:27 +0000 (18:15 +0400)]
0025026: Visualization, Graphic3d_Plotter - remove unused class
aba [Thu, 19 Jun 2014 07:41:34 +0000 (11:41 +0400)]
0024902: Visualization, StdPrs_ShadedShape - advanced processing of Compounds containing mixture of closed Solids and open Shells
StdPrs_ShadedShape, add flag theToExploreSolids to method ::Add().
Previously the tool collected triagnulations from all Faces into single graphic group.
The automated algorithm for back-face culling activation has to disable culling
when within closed Solids single Compound contains also open Shells.
Now tool is able to optionally (enabled by default) split these two categories of primitives
into dedicated groups with independent back-face culling settings.
In addition, this closed flag is now stored in Graphic3d_Group::myIsClosed which allows
capping algorithm OpenGl_CappingAlgo to automatically filter improper groups.
apn [Fri, 20 Jun 2014 07:42:59 +0000 (11:42 +0400)]
Modified TPS in test cases bugs/modalg_5/bug24157_8 bug24157_9
ibs [Thu, 19 Jun 2014 09:29:13 +0000 (13:29 +0400)]
0025020: checkoverlapedges doesn't have the check for degenerated edges
the check for degenerated edges added
Test case for issue CR25020
jgv [Thu, 19 Jun 2014 09:27:27 +0000 (13:27 +0400)]
0024964: ThruSections crashes the DRAW.exe
Test case for issue CR24964
oan [Thu, 19 Jun 2014 09:23:53 +0000 (13:23 +0400)]
0023631: Infinite memory consumption in BRepMesh
Check is the shape to be meshed has correct poly data, i.e. PolygonOnTriangulation of particular edge connected to the same Triangulation data structure as stored inside a parent face.
Adding test cases for issue CR23631 bugs/mesh/bug23631
Parallel checking of faces/edges
Make BRepMesh_IncrementalMesh class imported from BRepMesh package.
Resolve GCC warnings on Linux platform
Fix compilation errors on MacOs: remove mutable modificator on reference fields.
kgv [Tue, 17 Jun 2014 15:43:54 +0000 (19:43 +0400)]
0025018: Draw Harness - misprint in argument "-settransparancy" for command vaspects
razmyslovich [Mon, 16 Jun 2014 14:27:06 +0000 (16:27 +0200)]
0025012: ShapeFix_Wire checks the wrong parameter for the curve during SameParameter check
SameParameter check is fixed to verify the correct pairs of parameters
razmyslovich [Mon, 16 Jun 2014 14:18:23 +0000 (16:18 +0200)]
0025011: IntAna_QuaQuadGeo can crash with out-of-bounds exception
Fix the crash in IntAna_QuadQuadGeo by checking the number of intersections
apn [Tue, 17 Jun 2014 13:18:18 +0000 (17:18 +0400)]
Modified CPU limit in test cases inDebug mode.
apv [Wed, 11 Jun 2014 08:44:00 +0000 (12:44 +0400)]
Added QA command OCC23950 and test case bugs/xde/bug23950 for issue 23950
razmyslovich [Tue, 10 Jun 2014 11:50:14 +0000 (13:50 +0200)]
0024998: The incorrect _USE_MATH_DEFINES definition in Standard_math.hxx prevents the clean build for client applications
Add #ifndef clause to avoid redefinition compile error
jgv [Mon, 9 Jun 2014 09:25:40 +0000 (13:25 +0400)]
0024985: Control of maximum degree and number of segment in the Pipe Shell algorithm
vro [Thu, 5 Jun 2014 07:33:24 +0000 (11:33 +0400)]
0024987: Visualization - Add missing implementation of Select3D_SensitiveTriangulation::DetectedTriangle()
A missed method is implemented.
san [Wed, 11 Jun 2014 06:45:17 +0000 (10:45 +0400)]
0024989: Visualization - workaround vc12 32-bit compiler optimizer bug resulted in crash in AIS_Axis
Test case for issue CR24989
abv [Wed, 11 Jun 2014 06:43:27 +0000 (10:43 +0400)]
0024971: Incomplete interface of NCollection classes
NCollection classes amended to be compatible with TCollection equivalents:
- List and Maps: copy constructor is used for placement of new items in collection instead of assignment operator, thus default constructor is not necessary any more for the item class
- Constructors with additional argument of element type added in array classes operated by Handle, defined by NCollection_DefineHArray*.hxx, allowing to initialize array immediately by specified value
- Non-const methods First() and Last() are added in List class, and method Value() in TListIterator class
- Method Append() accepting Handle(HSequence) provided in NCollection_DefineHSequence.hxx
- Default implementation of global function IsEqual() is provided as template (using operator ==)
Code using lists and maps of sequences is refactored to operate sequence by Handle (since Sequence does not to have public copy constructor).
In addition, error checking code is simplified to use macros _Raise_if instead of custom #ifdefs with the same meaning.
Comments within declaration of instances of generic classes in CDL removed.
Fixed bug in copy constructor of NCollection_BaseVector leading to corrupt data if original vector is empty; simplistic test command for vectors is added.
emv [Wed, 11 Jun 2014 06:41:15 +0000 (10:41 +0400)]
0024981: IntTools_FaceFace enters to infinite loop on the attached case
class IntTools_Tools
method
Standard_Boolean IntTools_Tools::AdjustPeriodic
(const Standard_Real thePar,
const Standard_Real theParMin,
const Standard_Real theParMax,
const Standard_Real thePeriod,
Standard_Real &theNewPar,
Standard_Real &theOffset,
const Standard_Real theEps)
The new function has been implemented for fast adjustment of pcurves to the range of surface.
Test case correction for issue CR24981
emv [Thu, 5 Jun 2014 10:23:29 +0000 (14:23 +0400)]
0024939: Incorrect result of Fuse operation
Modification:
class IntTools_EdgeEdge
For correct computation of resolution for curves of type Hyperbola and Parabola two new static functions have been implemented:
static
Standard_Real ResolutionCoeff(const BRepAdaptor_Curve& theBAC,
const IntTools_Range& theRange);
static
Standard_Real Resolution(const Handle(Geom_Curve)& theCurve,
const GeomAbs_CurveType theCurveType,
const Standard_Real theResCoeff,
const Standard_Real theR3D);
bugs moddata_2 bug26_2 - improvement.
Test case for issue CR24939
Test case correction for issue CR24939
pkv [Thu, 5 Jun 2014 10:21:37 +0000 (14:21 +0400)]
0024973: Incorrect PCurve construction
class: BOPTools_AlgoTools2D
method:
void BOPTools_AlgoTools2D::MakePCurveOnFace
(const TopoDS_Face& aF,
const Handle(Geom_Curve)& aC3D,
const Standard_Real aFirst,
const Standard_Real aLast,
Handle(Geom2d_Curve)& aC2D,
Standard_Real& TolReached2d)
has been modified to provide the conformity with the location of the surface
Test case for issue CR24973
pkv [Mon, 2 Jun 2014 08:09:10 +0000 (12:09 +0400)]
0024952: Possibility to break Boolean operations algorithm by user request
class: BOPAlgo_Algo
method:
void BOPAlgo_Algo::SetProgressIndicator
(const Handle(Message_ProgressIndicator)& theObj)
Purpose: Set the Progress Indicator object <theObj>.
method:
void BOPAlgo_Algo::UserBreak() const
Purpose: Breaks the execution if the break signal is indicated.
ski [Thu, 5 Jun 2014 10:18:09 +0000 (14:18 +0400)]
0024972: Problem of the influence of the includes order during compilation
All necessary files were included.
Unused files from package PColStd were removed.
oan [Thu, 5 Jun 2014 10:16:48 +0000 (14:16 +0400)]
0024945: Extrema_ExtPElC::Perform does not consider angular tolerance when calculates angle between two vectors
Consider angular tolerance during calculation of angle between two vectors for protection against deviations that are significantly less than tolerance.
Simplified code to reduce number of comparison
Added QA command OCC24945 and test case bugs/moddata_3/bug24945
abv [Thu, 5 Jun 2014 10:14:14 +0000 (14:14 +0400)]
0024955: Misuse of DownCast
Code where DownCast was applied to Handle of the type being not a base class of the target one is revised and (hopefully) corrected.
Code corrected following review remarks
GeomConvert::CurveToBSplineCurve() is called even for b-spline curves to ensure that result is non-periodic
Check for conic is corrected
abv [Mon, 12 May 2014 12:08:36 +0000 (16:08 +0400)]
0024240: Separation of header files for QANCollection into hxx and cxx
Files in QANCollection tests reorganized to avoid placing code in header files
abv [Thu, 8 May 2014 05:13:00 +0000 (09:13 +0400)]
0024911: Avoid using virtual functions in NCollection classes
NCollection_BaseCollection class, relevant header files, and macro DEFINE_BASECOLLECTION removed.
Hence methods Assign() from other compatible (via inheritance of BaseCollection) collections are not available any more, as well as base Iterator class.
All methods of Iterator classes are made non-virtual, allowing their inline expansion for better performance.
OCCT-specific operators new and delete added to collection classes and removed from iterator classes.
bugmaster [Mon, 2 Jun 2014 10:32:23 +0000 (14:32 +0400)]
Update of CMakeLists.txt for Microsoft Visual Studio 2013
abv [Thu, 29 May 2014 12:39:13 +0000 (16:39 +0400)]
0024974: GCC compiler warnings 'backslash inside comment'
Backslash at the end of the line within comment escaped by dot to avoid GCC warning
dbp [Fri, 23 May 2014 13:23:16 +0000 (17:23 +0400)]
0024951: Qt samples - fix compilation after changes in Raytracing API
Compilation errors in qt samples were fixed.
ika [Thu, 29 May 2014 12:43:38 +0000 (16:43 +0400)]
0024055: Reading a STEP file produces invalid shape
Add checks for cone-like surfaces during seam fixing
Delete check for missing degenerated edge for cones in FixMissingSeam() function, because this check is exist in FixPeriodicDegenerated(). Check for uniqueness of wire is unnecessary after this.
Update of test-cases
nbv [Thu, 29 May 2014 12:38:47 +0000 (16:38 +0400)]
0024889: Geom2dAPI_InterCurveCurve produces result with parameter outside the curve limits
1. DRAW-command for testing was created (see QABugs_19.cxx)
2. Alignments were changed in other files.
Main Changes are into IntCurve_IntConicConic_1.cxx file (variable isOutOfRange was added).
If found intersection point is out of range, minimal distance between corresponding ends of interval is taken. If this distance is less than tolerance, this point replaces found intersection point. Otherwise, found intersection point is ignored.
Modified QA command OCC24889 and added test case bugs/modalg_5/bug24889
gka [Wed, 28 May 2014 12:11:04 +0000 (16:11 +0400)]
0024960: Value of result tolerance after "fixshape" is bigger than value of set "Maximal tolerance".
Description of using "Maximal tolerance" and "Minimal tolerance" values in class ShapeFix_Shape was updated.
aml [Wed, 28 May 2014 05:39:02 +0000 (09:39 +0400)]
0024937: New compile warning in Extrema_GenExtCC.gxx on MacOS
Compilation warning eliminated.
nbv [Wed, 28 May 2014 07:18:27 +0000 (11:18 +0400)]
0024953: Draw crashed after execution of test case bugs/modalg_5/bug24764
Reason of exception was liquidated.
aml [Thu, 29 May 2014 12:21:56 +0000 (16:21 +0400)]
0024946: Wrong result obtained by Extrema Curve/Curve
Fixes in Extrema Curve/Curve algorithm and in corresponding testcase.
Added test case bugs/modalg_5/bug24946