occt.git
5 years ago0023948: Wrong intersection between a surface of revolution and a plane.
mkv [Thu, 28 Aug 2014 10:50:35 +0000]
0023948: Wrong intersection between a surface of revolution and a plane.

Adding testing cases

5 years ago0024581: BuildSweep fails to trim components of resulting shape at spine knuckles...
apv [Mon, 25 Aug 2014 13:21:43 +0000]
0024581: BuildSweep fails to trim components of resulting shape at spine knuckles when parameter -C is used
Test-case for issue #24581

5 years agoAdding test cases for issue 25167, 25168, 25169
bugmaster [Fri, 22 Aug 2014 10:15:41 +0000]
Adding test cases for issue 25167, 25168, 25169

5 years ago0024915: Wrong intersection curves between two cylinders
nbv [Fri, 15 Aug 2014 10:35:04 +0000]
0024915: Wrong intersection curves between two cylinders

Existing method of Cylinder-Cylinder intersection computing is based on finding the analytic line (as a function of one argument) and converting one into the walking-line with set of equidistant (along the line parameter) points.

The main advantage of applied method is using adaptively computed step. Necessary step is computed into every point of the obtained walking-line. At that we receive final walking-line directly (without preliminary analytic line) and we determine moments more precisely, when it should be split (see IntPatch_ImpImpIntersection_4.gxx).

The main disadvantages is bad working this method for non-trimmed cylinders (with infinite bounds), because step value is depend on the boundaries values.

More over, new method always returns walking-line, while intersection result can be an analytic curve (lines, circle, ellipse). That is NO good. Therefore, analytic curve is computed by existing method.

In conclusion, in spite of covering almost all more often meeting cases, new method has limited application. Then we should use the existing old method.

Additionally, method MinMax() is added (see Standard_Real.hxx file). It uses into new algorithm.

Some test cases is changed according to their new behavior.

Test case for issue CR24915 is added.

Into GeometryTest_APICommands.cxx only tabulations were chaged.

"Extending" of isolines (see Geom2dHatch_Hatcher.cxx).

Small correction of test case for issue CR24915.

5 years ago0022680: Empty result after STEP import
martinsiggel [Thu, 21 Aug 2014 10:37:04 +0000]
0022680: Empty result after STEP import

Fixed identical knots not correctly handled in STEP import

Test cases for issue CR22680

Correction test cases for CR22680

5 years ago0025169: STEP Reader - allow opened shells to be an outer for ManifoldSolidBrep
drazmyslovich [Tue, 19 Aug 2014 13:31:06 +0000]
0025169: STEP Reader - allow opened shells to be an outer for ManifoldSolidBrep

Allow opened shells to be an outer for ManifoldSolidBrep

5 years ago0025167: STEP Reader - allow NextAssemblyUsageOccurance to accept ProductDefinitionSh...
drazmyslovich [Tue, 19 Aug 2014 11:49:37 +0000]
0025167: STEP Reader - allow NextAssemblyUsageOccurance to accept ProductDefinitionShape as child instead of ProductDefinition

Workaround to allow NextAssemblyUsageOccurance accepting ProductDefinitionShape as child instead of ProductDefinition

5 years ago0025168: STEP Writer - empty AppliedGroupAssignment can cause exception in RWStepAP21...
drazmyslovich [Tue, 19 Aug 2014 12:28:48 +0000]
0025168: STEP Writer - empty AppliedGroupAssignment can cause exception in RWStepAP214_RWAppliedGroupAssignment class

Function WriteStep is fixed

5 years ago0025166: STEP Reader - allow GEOMETRIC_SET entity to accept non-geometric children
drazmyslovich [Thu, 21 Aug 2014 08:41:24 +0000]
0025166: STEP Reader - allow GEOMETRIC_SET entity to accept non-geometric children

Allow GEOMETRIC_SET entity to accept GeometricRepresentationItem children

Modification to avoid cyclic dependency between STEPControl and StepToTopoDS packages

Test cases for issue CR25166

5 years ago0025153: Retrieval of arguments of selection crashes the application
vro [Thu, 21 Aug 2014 08:33:57 +0000]
0025153: Retrieval of arguments of selection crashes the application

A check on NULL is added into TDF_Tool::OutReferences() static methods.

Test cases for issue CR25153

5 years ago0024949: Segmentation Violation during pipe creation
jgv [Thu, 21 Aug 2014 08:28:08 +0000]
0024949: Segmentation Violation during pipe creation

Test cases for issue 0024949

Correction of test case for issue CR24949

5 years ago0017126: Vizualisation in 3d viewer in Draw hungs up
mkv [Mon, 18 Aug 2014 14:06:42 +0000]
0017126: Vizualisation in 3d viewer in Draw hungs up

Test cases added

5 years ago0025043: there is no possibility to know what exactly subshape of source shape has...
emv [Thu, 21 Aug 2014 08:17:36 +0000]
0025043: there is no possibility to know what exactly subshape of source shape has detected problems by BRepAlgoAPI_Check

Since there is a possibility to run the check on self-intersection (BOPAlgo_CheckerSI algorithm) in non-destructive mode (source shape will not be modified)
there is no need to make copies of the arguments of BRepAlgoAPI_Check.

Test case added

5 years ago0025163: Wrong result of common operation for faces.
pkv [Thu, 21 Aug 2014 08:14:53 +0000]
0025163: Wrong result of common operation for faces.

Changes:
class BOPAlgo_WireSplitter
static function:
Standard_Boolean RefineAngle2D(const TopoDS_Vertex& aV,
                               const TopoDS_Edge& aE,
                               const TopoDS_Face& myFace,
                               const Standard_Real aA1,
                               const Standard_Real aA2,
                               Standard_Real& aA)
The contents of Domain 2D for the straight line has been changed.

class BOPTools_AlgoTools2D
method:
void BOPTools_AlgoTools2D::AdjustPCurveOnFace
  (const TopoDS_Face& aF,
   const Standard_Real aFirst,
   const Standard_Real aLast,
   const Handle(Geom2d_Curve)& aC2D,
   Handle(Geom2d_Curve)& aC2DA)
The treatment of cylindrical surfaces has been changed taking into account
existing values of tolerances of the edges.

Test cases for issue CR25163

5 years ago0025086: Implementation PSO in package math
aml [Mon, 21 Jul 2014 08:52:15 +0000]
0025086: Implementation PSO in package math

Porting Particle Swarm Optimization (PSO) to math package.

5 years ago0025111: Incomplete section curve between Conical and Toroidal surfaces
jgv [Thu, 21 Aug 2014 08:04:56 +0000]
0025111: Incomplete section curve between Conical and Toroidal surfaces

Correction of test cases for CR25111

Test cases for issue CR25111

5 years ago0025106: Command "splitshape" does not split attached face by attached edge
jgv [Thu, 21 Aug 2014 07:49:58 +0000]
0025106: Command "splitshape" does not split attached face by attached edge

Test cases for issue CR25106

5 years ago0025161: Exception in draw trying pload ALL (espesially TOPTEST)
apn [Tue, 19 Aug 2014 06:11:04 +0000]
0025161: Exception in draw trying pload ALL (espesially TOPTEST)

Deleted following includes in src/SWDRAW/SWDRAW.cxx :
#include <XSAlgo/XSAlgo.hxx>
#include <XSAlgo/XSAlgo_AlgoContainer.hxx>

5 years ago0025158: Visualization, OpenGl_Context - support EGL as alternative to WGL and GLX
kgv [Mon, 18 Aug 2014 04:43:39 +0000]
0025158: Visualization, OpenGl_Context - support EGL as alternative to WGL and GLX

5 years ago0024610: Visualization, Visual3d_View::MinMaxValues() - skip erased objects while...
san [Thu, 21 Aug 2014 07:43:33 +0000]
0024610: Visualization, Visual3d_View::MinMaxValues() - skip erased objects while computing bounding box for Fit All operations

"vfit" takes into account erased objects

Visual3d_View::MinMaxValues() corrected to ignore hidden Graphic3d_Structure instances,
unused Graphic3d_StructureManager::MinMaxValues() removed.

Correction of test-case

5 years ago0025099: Visualization - Option to show vertices of a shape
san [Thu, 21 Aug 2014 07:29:57 +0000]
0025099: Visualization - Option to show vertices of a shape

Option to display all vertices of a shape by AIS_Shape implemented
in addition to the old behavior (when only isolated vertices were drawn).

Eliminate new compiler warning

5 years ago0024444: Compilation issues on some not fully POSIX compliant Unix systems
apl [Thu, 14 Aug 2014 09:42:50 +0000]
0024444: Compilation issues on some not fully POSIX compliant Unix systems

- Standard package.
- OSD package.
- Aspect package.
- Xw package.

5 years ago0025137: The methods "Convert" point defined in the reference frame of the view into...
osa [Mon, 11 Aug 2014 07:02:30 +0000]
0025137: The methods "Convert" point defined in the reference frame of the view into the projected point and backwards are not consistent

5 years ago0023649: Visualization, AIS_LocalContext - make highlighting of already selected...
aba [Thu, 14 Aug 2014 08:20:09 +0000]
0023649: Visualization, AIS_LocalContext - make highlighting of already selected objects consistent with and without Shift modifier

1) Add SelectMgr_EntityOwner::IsSelected() and  SelectMgr_EntityOwner::SetSelected() methods to determine if corresponding  entity is selected.
    They replace functionality of SelectMgr_EntityOwner::State() methods that are deprecated now.
2) AIS_InteractiveContext::ToHilightSelected() and AIS_InteractiveContext::SetToHilightSelected() is to be used to enable highlighting of selected objects.
3) By default selected objects are highlighted (new behavior)
4) Add ViewerTest_ViewerCommands: vhighlightselected command to enable/disable 'highlight selected objects' mode.
5) AIS_LocalContext, AIS_InteractiveContext : style changes in Select and ShiftSelect methods.
6) Add test cases /bugs/vis bug23649_1 and  /bugs/vis bug23649_2 to test highlighting of selected objects in local context.
7) Add test cases /bugs/vis bug23649_3 and  /bugs/vis bug23649_4  to test highlighting of selected objects in neutral point.

Updated test case

5 years ago0025127: Wrong result done by General Fuse algorithm
emv [Thu, 14 Aug 2014 08:01:59 +0000]
0025127: Wrong result done by General Fuse algorithm

class BOPTools_AlgoTools
method
  Standard_Boolean BOPTools_AlgoTools::IsSplitToReverse
    (const TopoDS_Face& theFSp,
     const TopoDS_Face& theFSr,
     Handle(IntTools_Context)& theContext)

Reverse normal direction for REVERSED faces.

Test case for issue CR25127

5 years ago0025128: Memory leak in BOPDS_DS::Paves()
emv [Thu, 7 Aug 2014 06:09:12 +0000]
0025128: Memory leak in BOPDS_DS::Paves()

class BOPDS_DS
 method
   void BOPDS_DS::Paves(const Standard_Integer theEdge,
                        BOPDS_ListOfPave& theLP)
class BOPDS_PaveBlock
 method
   void BOPDS_PaveBlock::Update(BOPDS_ListOfPaveBlock& theLPB,
                                const Standard_Boolean theFlag)

Using NCollection_Array1 class to ensure proper allocation and deallocation of memory.

5 years ago0024834: Allocation of memory for exception message must not throw another exception
apv [Wed, 13 Aug 2014 13:44:46 +0000]
0024834: Allocation of memory for exception message must not throw another exception

Removing warnings

5 years ago0024863: CLang warnings -Wint-to-void-pointer-cast
ski [Thu, 7 Aug 2014 10:31:10 +0000]
0024863: CLang warnings -Wint-to-void-pointer-cast

Warning was fixed.

Remarks were applied.

- class VMap in Draw was removed
- NCollection_DataMap is used to store objects
- name of object is used to associate Tcl variable with the object
- creation and changing of objects are correclty handled

Redundant casts were removed.

Initial value is restored if variable is protected.
Tests for bug #24863 were added.

Some test cases and tcl command "save" were improved.

Useless using of upvar was removed.

5 years ago0024908: Make OSD_MallocHook working under MSVS 2012
msv [Thu, 8 May 2014 12:09:06 +0000]
0024908: Make OSD_MallocHook working under MSVS 2012

Additionally, insert a code in the inline method place_for_breakpoint in order to have any instruction in object code for placement of a break point.

5 years ago0025112: Undo of modification of the attribute TDataStd_IntPackedMap works wrong
msv [Thu, 7 Aug 2014 10:21:52 +0000]
0025112: Undo of modification of the attribute TDataStd_IntPackedMap works wrong

Test case for issue #25112

5 years ago0025122: Expose internal static function ComputeDeviation from ShapeAnalysis_Edge.cxx
Roman Lygin [Mon, 4 Aug 2014 04:52:42 +0000]
0025122: Expose internal static function ComputeDeviation from ShapeAnalysis_Edge.cxx

5 years ago0025121: Visualization, OpenGl_Text - correct scaling factor for fixed-size text...
kgv [Thu, 7 Aug 2014 10:11:28 +0000]
0025121: Visualization, OpenGl_Text - correct scaling factor for fixed-size text at 3D point

Test case for issue #25121

5 years ago0025116: BRepTools - do not force Message_ProgressIndicator updates on each minor...
kgv [Thu, 31 Jul 2014 12:12:45 +0000]
0025116: BRepTools - do not force Message_ProgressIndicator updates on each minor iteration

5 years ago0024834: Allocation of memory for exception message must not throw another exception
apv [Thu, 7 Aug 2014 09:56:19 +0000]
0024834: Allocation of memory for exception message must not throw another exception

Update of test case to eliminate 64-bit architecture from testing

5 years agoUpdate for problem of warning with Exception
bugmaster [Fri, 1 Aug 2014 13:06:45 +0000]
Update for problem of warning with Exception

5 years ago0024943: Port MFC samples to UNICODE for compatibility with VS2013
kgv [Thu, 31 Jul 2014 09:52:43 +0000]
0024943: Port MFC samples to UNICODE for compatibility with VS2013

Add vc12 project files for MFC samples.

CMake - add Unicode option for MFC samples

CMake - do not set MFC option globally

Update description of Cmake building procedure for MFC sample

Correction of cmake.md and automake.md

0024943: Port MFC sample to UNICODE for compatibility with VS2013
The formatting of developer guides about OCCT building with various build systems has been improved.

automake article clean up

5 years ago0025105: Remove TColgp_DataMapOfIntegerCirc2d
abv [Fri, 25 Jul 2014 16:50:18 +0000]
0025105: Remove TColgp_DataMapOfIntegerCirc2d

5 years ago0025067: Change default location of test results
abv [Thu, 10 Jul 2014 07:40:05 +0000]
0025067: Change default location of test results

Generation of default path for test results corrected to have "results" as subdirectory and not prefix.

Parsing images in test results restricted to take only files with name of the test case without suffix or with suffix separated by underscore or dash, to avoid fetching images from different test case if its name starts like current test case.

5 years ago0024992: missing implementation for GeomConvert_CompCurveToBSplineCurve::Clear()
abv [Fri, 6 Jun 2014 03:19:19 +0000]
0024992: missing implementation for GeomConvert_CompCurveToBSplineCurve::Clear()

Method GeomConvert_CompCurveToBSplineCurve::Clear() implemented

5 years ago0002845: Regression of work of selections for STEP translator.
apv [Thu, 31 Jul 2014 09:28:27 +0000]
0002845: Regression of work of selections for STEP translator.

Adding test case

5 years ago0023010: Error with a .stp model during transfer from STEPCAFControl_Reader to document
apv [Thu, 31 Jul 2014 09:26:42 +0000]
0023010: Error with a .stp model during transfer from STEPCAFControl_Reader to document

Adding test case

5 years ago0023969: It's impossible to display shape in 3dviewer. Wrong displaying in axo.
apv [Thu, 31 Jul 2014 09:20:05 +0000]
0023969: It's impossible to display shape in 3dviewer. Wrong displaying in axo.
Adding test case

5 years ago0022470: Crash during IGES import
apv [Thu, 31 Jul 2014 09:15:26 +0000]
0022470: Crash during IGES import
Adding test case

5 years agoUpdate standard CSharp projects up to VC++ 2010
bugmaster [Wed, 30 Jul 2014 14:18:24 +0000]
Update standard CSharp projects up to VC++ 2010

5 years ago0025021: New option of BRepOffsetAPI_MakeOffset algorithm: open result for open wire
jgv [Thu, 24 Jul 2014 09:57:02 +0000]
0025021: New option of BRepOffsetAPI_MakeOffset algorithm: open result for open wire

Test cases for issue CR25021

5 years ago0023950: Names and visibility of points not saved when writing XCAF Document into...
ika [Thu, 24 Jul 2014 09:49:25 +0000]
0023950: Names and visibility of points not saved when writing XCAF Document into STEP

Add new mode of writing vertices and parameter to switch on this mode.

Add description of new parameter (write.step.vertex.mode) into documentation.

Small correction of draw-command and test case for issue CR25095

test case correction

Small correction of test case for issue CR23950

5 years ago0025095: Wrong result obtained by projection algorithm
ifv [Thu, 24 Jul 2014 09:31:21 +0000]
0025095: Wrong result obtained by projection algorithm

Test cases for issue CR25095

5 years ago0025094: Visualization, Visual3d_View - code clean up
kgv [Sun, 20 Jul 2014 11:04:13 +0000]
0025094: Visualization, Visual3d_View - code clean up

Remove debug and obsolete code. Apply coding rules.

5 years ago0024926: MeshVS - improve generation of primitive arrays
dbp [Thu, 24 Jul 2014 09:21:54 +0000]
0024926: MeshVS - improve generation of primitive arrays

Remove redundant code.

Fix GCC compilation warnings.

Bug fix in MeshVS_ElementalColorPrsBuilder.

5 years ago0025088: Revert or change API of BRepMesh_IncrementalMesh to prevent possible errors...
oan [Thu, 17 Jul 2014 10:45:16 +0000]
0025088: Revert or change API of BRepMesh_IncrementalMesh to prevent possible errors occurred due to changed order of parameters

Revert old constructor

5 years ago0025092: COMPSOLIDs are not exported to STEP
ika [Thu, 24 Jul 2014 09:06:30 +0000]
0025092: COMPSOLIDs are not exported to STEP

Now COMPSOLID is translated like a set of SOLIDs.

Test cases for issue CR25092

5 years ago0025090: Visualization - drop Graphic3d_Group::MyIsEmpty flag
kgv [Thu, 24 Jul 2014 09:01:40 +0000]
0025090: Visualization - drop Graphic3d_Group::MyIsEmpty flag

Small correction for issue CR25090

5 years ago0024872: Support of emission color in Phong shader and ray-tracing
duv [Thu, 24 Jul 2014 08:56:42 +0000]
0024872: Support of emission color in Phong shader and ray-tracing

Test cases for issue CR24872

5 years ago0023191: Visualization - small objects displayed with visual artifacts
mkv [Wed, 16 Jul 2014 11:08:44 +0000]
0023191: Visualization - small objects displayed with visual artifacts

Test case for issue CR23191

5 years agoUpdate mfc sample after integration issue 0025071
bugmaster [Fri, 18 Jul 2014 09:35:24 +0000]
Update mfc sample after integration issue 0025071

5 years agoAdjusting testing case for debug mode
bugmaster [Fri, 18 Jul 2014 08:36:39 +0000]
Adjusting testing case for debug mode

5 years agoCorrection of testing cases for issue CR24979
mkv [Thu, 17 Jul 2014 08:23:20 +0000]
Correction of testing cases for issue CR24979

5 years ago0025074: Intf_Polygon2d - add virtual destructor
kgv [Sat, 12 Jul 2014 09:31:17 +0000]
0025074: Intf_Polygon2d - add virtual destructor

5 years ago0025057: Message_Algorithm fails to find messages defined for base class
abv [Tue, 8 Jul 2014 12:11:16 +0000]
0025057: Message_Algorithm fails to find messages defined for base class

New method HasMsg() is added in Message_MsgFile class to check if message with given key is registered.
That method is used in Message_Algorithm to check if message is defined on given level of class hierarchy.

Generation of error message in Message_MsgFile::Msg() is revised: now it includes a message key and gets added to the registry, to avoid re-generation in case of multiple requests.
Access to message registry maintained by the Message_MsgFile class is protected from concurrent access by mutex.

5 years ago0025080: [Regression] Problem of meshing narrow face
mkv [Thu, 17 Jul 2014 09:37:15 +0000]
0025080: [Regression] Problem of meshing narrow face

Test case for issue CR25080

5 years ago0024979: Optimize Extrema_GenExtCS
dbp [Tue, 15 Jul 2014 08:11:24 +0000]
0024979: Optimize Extrema_GenExtCS

The patch changes the algorithm of choosing the initial approximation for Newton's method. Instead of searching for a point on the fine shifted grid, the algorithm performs initial search for candidate points in the original coarse grid (which is cached in new version). After that particle swarm optimization (PSO) is used to localize the global minimum. This algorithm optimizes a problem by having a population of candidate solutions ("particles"), and moving these particles around in the search-space according to simple mathematical formula over the particle's position and velocity. Each particle's movement is influenced by its local best known position but, is also guided toward the best known positions in the search-space, which are updated as better positions are found by other particles. This strategy has reported good results in solving complex global optimization problems.

Current patch implements initial version of PSO for using in Extrema_GenExtCS class. Typically new approach allows to reduce the number of evaluations by 5-10 times. There are only few cases there the numbers of evaluations are comparable.

5 years ago0025003: Selection of a face fails if sensitive triangulation is computed with interi...
vro [Wed, 11 Jun 2014 08:19:44 +0000]
0025003: Selection of a face fails if sensitive triangulation is computed with interior flag = false

A check on length is added to avoid manipulation with a vector of null length.

5 years ago0025058: Regression of performance of BRepExtrema_ExtCC (1000 times slower)
aml [Thu, 17 Jul 2014 09:50:51 +0000]
0025058: Regression of performance of BRepExtrema_ExtCC (1000 times slower)

Added initial values approximation to improve performance.
Local optimization start coefficient fixed.

Test case for issue CR25058

5 years ago0024996: Visualization - newly displayed objects are clipped until first
duv [Thu, 17 Jul 2014 09:46:53 +0000]
0024996: Visualization - newly displayed objects are clipped until first
camera movement

AutoZFit operation now may be applied on Visual3d_View level.
Visual3d_View tracks Graphic3d_Structure updates and call AutoZFit within
Visual3d_View::Redraw if necessary.
In order to get AutoZFit functionality on Visual3d_View level ZfitAll
method moved from V3d_View into Graphic3d_Camera. AutoZFit method and
AutoZFitMode flag now part of Visual3d_View.

Test case for issue CR24996

5 years ago0025071: Visualization - Inconsistent deflection values used by AIS_Shape
san [Thu, 17 Jul 2014 09:39:22 +0000]
0025071: Visualization - Inconsistent deflection values used by AIS_Shape

Fix misprint

Small correction for issue CR25071

5 years ago0025075: BRepMesh - eliminate new x86_64 compiler warnings
kgv [Thu, 17 Jul 2014 09:34:05 +0000]
0025075: BRepMesh - eliminate new x86_64 compiler warnings

BRepMesh - fix compilation without TBB support

Code style

5 years ago0024901: Visualization - Incorrect area filled with capping color
mkv [Wed, 16 Jul 2014 11:06:12 +0000]
0024901: Visualization - Incorrect area filled with capping color

Test case for issue CR24901

5 years ago024539: Visualization (new camera) - small objects displayed with visual artifacts
mkv [Wed, 16 Jul 2014 11:11:41 +0000]
024539: Visualization (new camera) - small objects displayed with visual artifacts

Test case for issue CR24539

5 years ago0025064: TCollection modification for Salome porting
skv [Wed, 9 Jul 2014 10:53:35 +0000]
0025064: TCollection modification for Salome porting

5 years ago0025066: Visualization - fit all is malfunction when bounding box is set through...
kgv [Thu, 10 Jul 2014 05:25:59 +0000]
0025066: Visualization - fit all is malfunction when bounding box is set through Graphic3d_Group::SetMinMaxValues()

Ensure bounding box is marked as valid.

5 years ago0025008: wrong PPM generated in mage_AlienPixMap::savePPM
san [Mon, 14 Jul 2014 08:10:06 +0000]
0025008: wrong PPM generated in mage_AlienPixMap::savePPM

5 years ago0025017: Visualization - materials in Raytracing are messed up
duv [Fri, 11 Jul 2014 12:39:29 +0000]
0025017: Visualization - materials in Raytracing are messed up

5 years ago0025063: Visualization - 2D objects are not displayed at some camera positions
duv [Thu, 17 Jul 2014 07:31:29 +0000]
0025063: Visualization - 2D objects are not displayed at some camera positions

Minimum thresolds introduced to zfit operation and to camera SetDistance() method.

Test case for issue CR25063

5 years ago0025028: BRepAlgo::ConcatenateWire raises an exception
ifv [Thu, 17 Jul 2014 07:26:23 +0000]
0025028: BRepAlgo::ConcatenateWire raises an exception

Test case for issue CR25028

5 years ago0025060: Capping breaks highlighting of shaded AIS_Shape with displayed edges
apl [Thu, 10 Jul 2014 09:06:13 +0000]
0025060: Capping breaks highlighting of shaded AIS_Shape with displayed edges

Capping algorithm - remember and restore depth function mode.

5 years ago0023814: Drop plugin interface for Graphic3d_GraphicDriver instantiation
kgv [Thu, 3 Jul 2014 06:47:42 +0000]
0023814: Drop plugin interface for Graphic3d_GraphicDriver instantiation

Drop Graphic3d_GraphicDriver::Begin() and ::End() methods.
Initialization is performed within driver constructor.

Drop dummy argument for Graphic3d_GraphicDriver constructor with library name.
Display connection now should be set instead

Drop Graphic3d::InitGraphicDriver() function and Graphic3d.hxx header.
Application code should explicitly link against TKOpenGl toolkit and instantiate OpenGl_GraphicDriver class.

Drop MetaGraphicDriverFactory implementation within TKOpenGl.

5 years ago0025059: Visualization - mutable transformed structure still invalidates BVH tree...
kgv [Tue, 8 Jul 2014 15:23:47 +0000]
0025059: Visualization - mutable transformed structure still invalidates BVH tree for culling

Take into account IsMutable flag within Visual3d_View::ReCompute() method.

5 years agocorrection of misprints
bugmaster [Fri, 11 Jul 2014 09:42:53 +0000]
correction of misprints

5 years agoModified cpulimits in test cases in Debug mode.
apn [Fri, 11 Jul 2014 08:29:19 +0000]
Modified cpulimits in test cases in Debug mode.
Modified test case mesh/data/standard/V4 for issue 24968.

5 years agoFix compilation errors for mfc samples.
oan [Fri, 11 Jul 2014 07:02:27 +0000]
Fix compilation errors for mfc samples.

5 years ago0024990: StepWrite fails on the attached shape
ika [Thu, 10 Jul 2014 10:54:56 +0000]
0024990: StepWrite fails on the attached shape

Add check to avoid exception
Test cases for issue CR24990

5 years ago0024335: Draw Harness - support grids list in testgrid command
abv [Tue, 8 Jul 2014 11:08:46 +0000]
0024335: Draw Harness - support grids list in testgrid command

Arguments of command testgrid specifying test group and grid to be executed now can be a list of file masks (space or comma separated).
One more optional argument added allowing to specify masks for test cases to be run.

5 years ago0022978: Shading for a pipe shape is wrong
mkv [Mon, 7 Jul 2014 12:06:00 +0000]
0022978: Shading for a pipe shape is wrong

Test case for issue CR22978

5 years ago0025039: Improvement of code structure of general and supporting tools implemented...
oan [Thu, 10 Jul 2014 10:51:15 +0000]
0025039: Improvement of code structure of general and supporting tools implemented in BRepMesh

Removed CDL declarations; Data collections are replaced by NCollections; Small code refactoring.
Remove definition of BRepMesh class. Code refactoring of BRepMesh_IncrementalMesh.
Function BRepMesh_Write storing BRepMesh_DataStructureOfDelaun to BRep file is added for debug needs.
Static method BRepMesh_GeomTool::IntLinLin has been added to eliminate code duplications in BRepMesh_Dealun and BRepMesh_CircleTool.
BRepMesh_CircleTool simplified method to find circumcircle.

Fix merging conflicts
Remove redundant function
Fix compilation warning on MacOS
Revert changes occurred during rebase
Resolved merging conflicts
Use parallel flag with BRepMesh_FastDiscret

Test cases for issue CR25039_2

5 years ago0024925: Enabling OCAF persistence without setting environment variables
Roman Lygin [Thu, 10 Jul 2014 10:47:20 +0000]
0024925: Enabling OCAF persistence without setting environment variables

Add test case bugs/caf/bug24925
Merging with current master IR-2014-07-03

5 years ago0025052: Visualization - activation of all Clipping Planes within driver limit leads...
kgv [Thu, 10 Jul 2014 10:45:21 +0000]
0025052: Visualization - activation of all Clipping Planes within driver limit leads to broken planes management

Aspect_GenId::Available(), include size of the queue with recently freed identifiers
Aspect_GenId.cxx - remove tabulation symbols
Test cases for issue CR25052

5 years ago0025010: Use AIS_ColoredShape for display of XCAF documents
dbv [Thu, 10 Jul 2014 10:43:56 +0000]
0025010: Use AIS_ColoredShape for display of XCAF documents

Added methods HasUIsoAspect and HasVIsoAspect to AIS_Drawer
XCAFPrs_AISObject has been converted to non-cdl class
XCAFPrs_AISObject now inherits from AIS_ColoredShape
XCAFPrs_AISObject::Compute method has been rewritten in accordance with the new inheritance.
Regression fix

5 years ago0024876: Add protection of shapes against modification of geometry
ink [Thu, 10 Jul 2014 10:42:12 +0000]
0024876: Add protection of shapes against modification of geometry

Added flag "locked" for protection of geometric data in the shapes (including tolerances).
Modification test case to avoid regression.

5 years ago0024968: Impove BRepMesh_Classifier to cope with intersection of huge number of wires
oan [Thu, 10 Jul 2014 10:40:36 +0000]
0024968: Impove BRepMesh_Classifier to cope with intersection of huge number of wires

BRepMesh_Classifier: Two-pass approach for intersection check with possibility to run it in parallel mode.
First pass - bounding boxes of segments are checked for overlapping;
Second pass - intersection point is calculated in case if overlapping is detected.

Make NCollection_UBTree::ChangeLastNode() exported due to compilation error on Linux platform.
Reason: method does not depend on template parameters, so it should be available.

Revert previous change and try to use another trick for Linux

Fix compilation warning on MacOS: remove redundant constant
Fix regressions: do not consider insignificant loops in case of self intersections on the same wire.
More sugar solution for compilation errors on NCollection_EBTree on Linux

Test cases for issue CR24968

5 years ago0025051: Compilation issues on OS X 10.6.8
dbv [Fri, 4 Jul 2014 09:14:32 +0000]
0025051: Compilation issues on OS X 10.6.8

Added define to prevent inclusion of system glext.h on Mac OS X 10.6.8

5 years ago0025047: Visualization - public methods of OpenGl_AspectFace, OpenGl_AspectLine and...
kgv [Thu, 3 Jul 2014 07:09:48 +0000]
0025047: Visualization - public methods of OpenGl_AspectFace, OpenGl_AspectLine and OpenGl_AspectMarker classes are not exported

5 years agoIncrement version of OCCT up to 6.7.3
bugmaster [Wed, 9 Jul 2014 07:05:23 +0000]
Increment version of OCCT up to 6.7.3

5 years agoAdding solution and project for VC++ 2010
bugmaster [Fri, 4 Jul 2014 09:33:20 +0000]
Adding solution and project for VC++ 2010

5 years agoModified test cases in de group according to new behavior in issues 24983 and 24958
apn [Fri, 4 Jul 2014 08:42:15 +0000]
Modified test cases in de group according to new behavior in issues 24983 and 24958

5 years agoDo not include removed headers from package Aspect in samples (0025038)
kgv [Fri, 4 Jul 2014 06:29:09 +0000]
Do not include removed headers from package Aspect in samples (0025038)

5 years agoUpdate of header of files in context of License text
apn [Thu, 3 Jul 2014 13:23:56 +0000]
Update of header of files in context of License text

5 years ago0024983: For the incorrect seam edge in STEP file no fix is provided
razmyslovich [Thu, 3 Jul 2014 13:16:07 +0000]
0024983: For the incorrect seam edge in STEP file no fix is provided

fix the notched edges twice per face - before checking for missing seam and after
Test case correction for issue CR24983
Add check for invalid Surface of linear extrusion (with basis curve - line and extrusion direction parallel to this line) during converting STEP surface
Small corrections of test cases for issue CR24983

5 years ago0024958: Numerous ShapeFix_IntersectionTool code fixes
razmyslovich [Thu, 3 Jul 2014 13:13:17 +0000]
0024958: Numerous ShapeFix_IntersectionTool code fixes

Optimize periodic normalization.
not needed split edge, if one of parts is too small
Small corrections of test cases for issue CR24958_2

5 years agoModified test case for issue 23753
apn [Thu, 3 Jul 2014 12:09:39 +0000]
Modified test case for issue 23753

5 years agoModified test case for issue 23698
apv [Thu, 3 Jul 2014 12:07:28 +0000]
Modified test case for issue 23698