kgv [Thu, 30 Jan 2014 10:19:28 +0000 (14:19 +0400)]
0024555: Visualization - the same text is rendered with shift at second time
Font_FTFont::loadGlyph() - use the same flags as RenderGlyph(), FT_LOAD_NO_HINTING has been missed.
Test cases for issue CR24555
ibs [Tue, 28 Jan 2014 15:17:50 +0000 (19:17 +0400)]
0024580: CMake doesn't unset becoming unused variables when 3rdparty's usage is switched off
unset becoming unused variables when freeimage, opencl, tbb and gl2ps are switched off
apn [Wed, 29 Jan 2014 12:08:13 +0000 (16:08 +0400)]
0002793: BinOcaf: low performance saving documents with large attributes
Testing case bugs/caf/bug2793 was created.
pkv [Tue, 28 Jan 2014 07:09:54 +0000 (11:09 +0400)]
0024157: Parallelization of assembly part of BO
I. New features:
I.1 class BOPAlgo_ShellSplitter
The new class BOPAlgo_ShellSplitter has been added.
Purpose: The class provides the splitting of the set of connected faces
on separate loops
II. Changes:
II.1. class BOPAlgo_BuilderSolid
- method:
void BOPAlgo_BuilderSolid::PerformLoops()
the changes that provide parallel run the ShellSplitter algorithm have been done.
- method:
void BOPAlgo_BuilderSolid::PerformAreas()
the classification the grows and holes has been done using
the algorithm of unbalanced binary tree of overlapped bounding boxes
apl [Fri, 24 Jan 2014 07:01:42 +0000 (11:01 +0400)]
0024564: Select3D_SensitiveFace gives inaccurate picking depth for AIS_Plane (interior selection)
1) Used more accurate Select3D_SensitiveTriangulation instead of Select3D_SensitiveFace for rectangular sensitives in AIS_Plane::ComputeSelection, AIS_Dimension::ComputeSelection
2) Test case for CR24564
jgv [Thu, 30 Jan 2014 09:37:12 +0000 (13:37 +0400)]
0024481: Test "Perform Infinite Point" provides wrong result for a solid
Test cases for issue CR24481
apl [Thu, 30 Jan 2014 09:03:48 +0000 (13:03 +0400)]
0024569: AIS_InteractiveContext::Update(...) does not updates selection when changing AIS_Plane
1) Allow AIS_InteractiveContext::Update to check, re-project and recompute selection structures even if presentations are not "to be updated".
2) Test case bugs vis bug24569.
Small correction of test case for issue CR24569
nbv [Mon, 20 Jan 2014 10:56:15 +0000 (14:56 +0400)]
0024203: Command "sameparameter" in DRAW on attached edge set tolerance equal to 116.
Main problem:
Algorithm of locale extrema, which is called by "sameparameter" command, cannot find extrema because extremal point is far from initial point. Therefore, reparametrization of edge's curve (for same-parameter) cannot be made properly.
Solve:
Using of global extrema (see Approx_SameParameter.cxx).
As the given edge contains two 2d-curves and the second from them is problem, for select needed curve, an interface of "mk2dcurve" DRAW-command is changed. Now there can be used an index of curve (by default, index = 1, as earlier), see help for more detail information.
Test "heal advanced Z3":
Now checkshape finds only two invalid subshapes. Earlier, it found four subshapes. I think it is not regression. Therefore, test case was changed.
Tolerance reducing.
test
Roman Lygin [Thu, 30 Jan 2014 08:58:31 +0000 (12:58 +0400)]
0023855: Old BOPs fail on Win7 64bit when using TBB
Minor code refactoring (readability)
Test case for issue CR23855
dbp [Thu, 30 Jan 2014 08:53:54 +0000 (12:53 +0400)]
0024503: TKOpenGl - Porting ray-tracing component on BVH package
Updated test case v3d/raytrace/bug24130. The new version checks correctness of shadows.
mkv [Fri, 24 Jan 2014 10:34:34 +0000 (14:34 +0400)]
Draw command and test case for testing issue CR24533
bugmaster [Fri, 24 Jan 2014 09:57:48 +0000 (13:57 +0400)]
Deleted TODO in unstable test case in Debug mode.
duv [Thu, 23 Jan 2014 10:44:31 +0000 (14:44 +0400)]
0024001: Stereographic rendering support
Deleted TODOs which were used when branch was built without OpenCL.
Modified test case bugs/vis/bug23747_2 (changed textured shape)
dln [Thu, 23 Jan 2014 09:50:42 +0000 (13:50 +0400)]
0024552: Convertation of the generic classes to the non-generic (BndLib).
Package "BndLib":
Functionality of the files "BndLib_Compute.gxx", "BndLib_Compute2d.cxx" and "BndLib_Compute3d.cxx" (methods Compute(...) for 2d and 3d cases) moved to BndLib.cxx (to the template method Compute(...)). For that had to edit work with points and coordinates a little i.e. method Compute(...) was updated and some methods where Compute(..) is called in "BndLib.cxx".
Roman Lygin [Thu, 23 Jan 2014 09:37:50 +0000 (13:37 +0400)]
0024533: Use 0 to check null handle instead of UndefinedHandleAccess
Handle classes now use 0 as invalid value for pointer instead of custom (and platform-dependent) value like 0xfefd0000.
Compiler macros UndefinedHandleAddress and _OCC64 are eliminated.
gka [Thu, 23 Jan 2014 07:44:07 +0000 (11:44 +0400)]
0024517: Crash at StepToTopoDS_TranslateEdge::Init()
Fixed crash at StepToTopoDS_TranslateEdge::Init() for case when curve is absent)
Corrected error message for case of absence geom curve in edge curve
dln [Tue, 21 Jan 2014 11:59:23 +0000 (15:59 +0400)]
0024545: Convertation of the generic classes to the non-generic (XmlObjMgt).
In the package "XmlObjMgt" class "XmlObjMgt_Array1" was converted to the non-generic.
And some changes were made in "XmlNaming" package for correct compilation of the application.
kgv [Tue, 10 Dec 2013 13:19:39 +0000 (17:19 +0400)]
0024453: TKViewerTest - extend information provided by vstate command
abv [Thu, 16 Jan 2014 10:25:34 +0000 (14:25 +0400)]
0024536: GCC compiler warning on breakage of pointer aliasing rules in BRepFill_Evolved.cxx
Avoid storing result of call to TopoDS::Edge() as reference
dbp [Wed, 22 Jan 2014 15:07:53 +0000 (19:07 +0400)]
0024479: Ray Tracing mode does not work in Qt IE sample
Implementation of Ray Tracing mode in standard Qt sample
Fix compile warnings in Qt samples.
Fix tabs in Common-string.ts.
Update Code style.
0024415: Update QT samples
Code which was based on QT3 was removed. Some bugs and warnings has been also fixed.
Porting from QT4 to QT5 sample files.
mkv [Tue, 21 Jan 2014 07:15:51 +0000 (11:15 +0400)]
Update of testing case due to changes in issue 24370
bugmaster [Fri, 17 Jan 2014 11:27:10 +0000 (15:27 +0400)]
Correction for Fedora 18 64 bit issue 24473
bugmaster [Fri, 17 Jan 2014 08:35:12 +0000 (12:35 +0400)]
Correction of test cases for 24474 issue
dbp [Wed, 15 Jan 2014 13:21:18 +0000 (17:21 +0400)]
0024473: TKMath, BVH - introduce template-based package for Bounding volume hierarchy structures and tools
dbp [Tue, 14 Jan 2014 09:05:08 +0000 (13:05 +0400)]
0024320: TKOpenGl, Ray Tracing - OpenGL resources created for OpenCL interconnection should be managed in common way
kgv [Thu, 16 Jan 2014 17:09:20 +0000 (21:09 +0400)]
0024521: Visualization - automatic back face culling is not turned on for Solids packed into compound
StdPrs_ToolShadedShape::IsClosed():
- return true if shape is closed Solid (NOT just free closed Shell)
- accept compound of closed Solids as well
- ignore Solids with incomplete triangulation
TKOpenGl, automatically disable back face culling when:
- clipping/capping planes are in effect
- for translucent objects
Update bug23227 test case (now back faces are clipped).
OpenGl_Workspace::AspectFace() - disable culling in case of hatched style
abv [Wed, 15 Jan 2014 02:40:18 +0000 (06:40 +0400)]
0024252: GCC warnings on breakage of strict-aliasing rules
Fixed type casts in NCollection maps
Avoid invalid type cast in handling of LDOM text object
Use correct pointer type in callback function of Graphic3d_CGraduatedTrihedron class
Format of printf() simplified in IntPatch_Point.cxx
ysn [Thu, 16 Jan 2014 11:00:11 +0000 (15:00 +0400)]
0024526: Guide on Automatic Test System is obsolete
Update and revision of Testing System Guide
nbv [Wed, 15 Jan 2014 06:56:16 +0000 (10:56 +0400)]
0024427: Wrong section curves
Incorrect curve is got after Decompose method applying. This method's using should be restrict.
Decomposition is required if intersection curve contains some parts, where U-parameter on quadric surface changes too sharply.
Decompose method is called for Cone and Sphere only (it does not require for Cylinder).
Comments are changed by jgv.
Test case for issue CR24427
Added test case bugs/moddata_3/bug24427_2
Compiler warning is liquidated.
Test is corrected.
aba [Thu, 16 Jan 2014 10:09:05 +0000 (14:09 +0400)]
0024388: Option to enable visualization of hidden lines in DRAW
Added additional snapshot dumping to /tests/bugs/vis/bug24388_2. Corrected bug24388_1. Corrected vhlr command.
jgv [Thu, 16 Jan 2014 10:03:22 +0000 (14:03 +0400)]
0024532: BRepOffsetAPI_MakePipeShell raises an exception in a case with auxiliary guide
Test case for issue CR24532
szv [Thu, 12 Dec 2013 06:25:36 +0000 (10:25 +0400)]
0024458: Add commands for basic shape transformations
Added commands for basic transformations
gka [Thu, 16 Jan 2014 09:11:45 +0000 (13:11 +0400)]
0024370: [Regression] 6.7.0beta ShapeFix_EdgeProjAux breaks conventions on using IsDone flag.
Projection of 3d points corresponding to range of edge on 2d curve considered as successful for all cases to except for cases when projection is not made.
Initialization initial values of flags
Modification initial values of flags setting status Done for first and last parameters
Adding new draw-command for issue CR24370
Test case for issue CR24370
abk [Tue, 17 Dec 2013 13:01:51 +0000 (17:01 +0400)]
0024474: GCPnts_AbscissaPoint calculates invalid point
DRAW command discrCurve was created to test GCPnts_UniformAbscissa by count of discretization point.
Two bugs in GCPnts_AbscissaPoint were fixed.
DRAW tests for the bug were created.
ibs [Thu, 16 Jan 2014 08:33:39 +0000 (12:33 +0400)]
0024485: Draw Harness - create subfolder in temporary directory for temporary test results
for each test execution a specific directory is created in a temp directory.
the format of the created directory is next: group-gridname-casename_<data>_<time with secs>
indentations in changes were realigned
Output of warning messages on use of temporary directory disabled
emv [Thu, 16 Jan 2014 08:29:12 +0000 (12:29 +0400)]
0024505: Wrong section curves between Cone and Cylinder with collinear axes.
The intersection between Cone and one of the following surfaces: Cylinder, Sphere, Cone and Torus
is treated as analytical when the axes of the surfaces are collinear.
Test case for issue CR24505
jgv [Thu, 16 Jan 2014 08:20:12 +0000 (12:20 +0400)]
0024204: The algorithm BRepOffsetAPI_MakePipeShell produces resulting shape with unwarrantably big tolerance
Added test case bugs/modalg_5/bug24204
Modified following test cases:
bugs modalg_3 bug605 - case with bad input data, command "settolerance w1 1.e-7" was added;
bugs modalg_4 bug629 - wrong case, now the algorithm can not build pipes on such profiles, test case was removed;
bugs modalg_4 bug13595_1, bug13595_1 - number of subshapes was has changed;
bugs modalg_5 bug23706_2 - square of resulting face was changed;
bugs modalg_5 bug23870_1, bug23870_2, bug23870_3, bug23870_4, bug23870_5 - the number of subshapes was changed.
omy [Thu, 16 Jan 2014 08:16:56 +0000 (12:16 +0400)]
0024088: Unsafe window handle management in Draw using GetWindowLong
Replaced Get-/SetWindowLong with Get-/SetWindowLongPtr in files of TKDraw.
Reverted the unrelated changes
pkv [Fri, 10 Jan 2014 04:29:02 +0000 (08:29 +0400)]
0024157: Parallelization of assembly part of BO
Patch 06
I.1. class Bnd_Box2d
- method:
inline Standard_Real Bnd_Box2d::SquareExtent() const
has been added.
Purpose : The method returns the squared diagonal of the bounding box.
I.3. class BOPCol_BoxBndTree
has been added.
Purpose : The class is the instantiation of the algorithm of unbalanced binary tree
of overlapped bounding boxes 3D.
I.4. class BOPCol_Box2DBndTree
has been added.
Purpose : The class is the instantiation of the algorithm of unbalanced binary tree
of overlapped bounding boxes 2D.
I.5. class BOPAlgo_Algo
- method:
void BOPAlgo_Algo::SetRunParallel(const Standard_Boolean theFlag)
has been added.
Purpose: Set the flag of parallel processing
if <theFlag> is true the parallel processing is switched on
if <theFlag> is false the parallel processing is switched off
- method:
Standard_Boolean BOPAlgo_Algo::RunParallel()const
has been added
Purpose: Returns the flag of parallel processing
II.1. class BOPAlgo_Builder
- method:
void BOPAlgo_Builder::SetRunParallel(const Standard_Boolean theFlag)
has been removed due to I.5.
- method:
Standard_Boolean BOPAlgo_Builder::RunParallel()const
has been removed due to I.5
II.2. class BOPDS_BoxBndTree
has been removed due to I.3
II.3. classes
BOPDS_Iterator,
BOPDS_IteratorSI,
BOPDS_SubIterator
BOPAlgo_PaveFiller,
BOPAlgo_Builder
the calls to BOPDS_BoxBndTree have been changed to
the calls to BOPCol_BoxBndTree
due to I.3
II.4. class BOPAlgo_BuilderFace
- method:
void BOPAlgo_BuilderFace::PerformLoops()
the changes that provide parallel run the WireSplitter algorithm have been done.
- method:
void BOPAlgo_BuilderFace::PerformAreas()
the classification the grows and holes has been done using
the algorithm of unbalanced binary tree of overlapped bounding boxes
II.5. class BOPAlgo_WireSplitter
- method:
void BOPAlgo_WireSplitter::SplitBlock(const TopoDS_Face& myFace,
BOPTools_ConnexityBlock& aCB)
the method is transferred to the static, the signature of the method have been changed
- method:
void BOPAlgo_WireSplitter::MakeWires()
the changes to provide parallel run the SplitBlock algorithm have been done
kgv [Thu, 16 Jan 2014 07:55:43 +0000 (11:55 +0400)]
0024438: Message_Algorithm - allow customized status descriptions
kgv [Wed, 8 Jan 2014 08:21:29 +0000 (12:21 +0400)]
0024497: TKOpenGl, OpenGl_Context - Add getter for window field
omy [Tue, 24 Dec 2013 06:13:13 +0000 (10:13 +0400)]
0024209: Cppcheck errors "unusedScopedObject"
Fixed bug with temporary objects.
Denis Barbier [Thu, 9 Jan 2014 08:20:06 +0000 (12:20 +0400)]
0024510: Remove unused local variables
When warnings are enabled, compilers report lots of occurrences
of unused local variables, which makes it harder to find other
meaningful warnings.
This commit does not fix all unused local variables.
Fix new type conversion warning
Code cleaned to avoid MSVC compiler warnings on unused function arguments.
Several useless pieces of code are removed.
Changes in IntTools_EdgeFace.cxx, Blend_Walking_1.gxx, Bnd_BoundSortBox.cxx, ProjLib_ProjectedCurve.cxx are reverted (separated to specific issue for more in-depth analysis).
Denis Barbier [Thu, 9 Jan 2014 08:14:05 +0000 (12:14 +0400)]
0024511: Remove obsolete Image_PixelAddress.cxx
Image_PixelAddress.cxx had been removed from src/Image/FILES in CR23486 (commit
2361d7e), but the file had not been deleted.
Correction of inconsistent file and units lists (units DebugTools and OpenCL are removed from UDLIST; files EXTERNLIB and SCAN.tcl added to FILES list in Cocoa and DrawResources units)
Denis Barbier [Thu, 2 Jan 2014 21:54:45 +0000 (22:54 +0100)]
0024512: clang++ compiler complains about extra semicolon
Clang++ compiler emits warnings like these ones when parsing superfluous semicolons:
.../src/OSD/OSD_MAllocHook.cxx:49:2: warning: extra ';' outside of a function is a C++11 extension [-Wc++11-extra-semi]
.../src/ProjLib/ProjLib_ComputeApproxOnPolarSurface.cxx:317:30: warning: extra ';' after member function definition [-Wextra-semi]
bugmaster [Wed, 8 Jan 2014 10:47:11 +0000 (14:47 +0400)]
0024516: Copyright information has been corrupted within some headers
Update incorrectly modified header files
emv [Thu, 9 Jan 2014 08:01:01 +0000 (12:01 +0400)]
0024470: Wrong result done by General Fuse algorithm.
Modifications:
1. The validity of the intersection point between edge and face is checked with sum of the tolerance values of the edge and face.
2. The intersection between toroidal surface and one of the following surfaces: Plane, Cylinder, Sphere, Cone or Torus
is treated as analytical in the following cases:
1) Torus and Plane: a. Axes of the surfaces are parallel;
b. Axes of the surfaces are perpendicular and location of the torus is lying on the plane;
2) Torus and Sphere: The location of the sphere is lying on the line made from toruses axis;
3) Torus and Cone, Cylinder or Torus: The axis of the surfaces are collinear.
In all cases the intersection line(s) is(are) circle(s).
Added test cases bugs/modalg_5/bug24470
The intersection between torus with minor radius more than (or equal to) the major radius and any other surface is considered as parametric.
abv [Thu, 9 Jan 2014 07:56:20 +0000 (11:56 +0400)]
0024489: Avoid type casts in call to Standard::Free()
Method Standard::Free() is converted to template, so that pointer is nullified using its proper type.
Unnecessary type cases in calls to Standard::Free(), Standard::Reallocate(), and NCollection_BaseAllocator::Free() eliminated throughout OCCT code.
emv [Wed, 25 Dec 2013 12:24:57 +0000 (16:24 +0400)]
0024491: Partition algorithm history bug (faces).
Modifications in history:
1. All splits of the shape are returned as Modified from that shape.
2. For SECTION operation section edges are returned as Generated from the face.
emv [Wed, 25 Dec 2013 11:14:54 +0000 (15:14 +0400)]
0024495: Crash during performeng boolean operation on attached shape for Windows VC2010 64 bit
Recursion in the method Path in BOPAlgo_WireSplitter has been replaced with cycle.
kgv [Thu, 19 Dec 2013 04:53:37 +0000 (08:53 +0400)]
0024483: Visualization - drop unused class StdSelect_BRepHilighter
pkv [Thu, 26 Dec 2013 11:47:44 +0000 (15:47 +0400)]
0024463: BRepAlgo_Section::Build hangs
Added test case bugs/modalg_5/bug24463
pkv [Thu, 26 Dec 2013 11:43:44 +0000 (15:43 +0400)]
0024492: The command bopargcheck produces wrong results for cases.
New features:
- class BOPDS_InterfVZ has been added.
Purpose: The class BOPDS_InterfVZ is is to store the information about
the interference of the type vertex/solid.
- class BOPDS_InterfEZ has been added.
Purpose: The class BOPDS_InterfEZ is is to store the information about
the interference of the type edge/solid.
- class BOPDS_InterfFZ has been added.
Purpose: The class BOPDS_InterfFZ is is to store the information about
the interference of the type face/solid.
- class BOPDS_InterfFZ has been added.
Purpose: The class BOPDS_InterfZZ is is to store the information about
the interference of the type solid/solid.
- class BOPDS_DS
-methods
inline BOPDS_VectorOfInterfVZ& BOPDS_DS::InterfVZ()
Purpose: Returns the collection of interferences Vertex/Solid
inline BOPDS_VectorOfInterfEZ& BOPDS_DS::InterfEZ()
Purpose: Returns the collection of interferences Edge/Solid
inline BOPDS_VectorOfInterfFZ& BOPDS_DS::InterfFZ()
Purpose: Returns the collection of interferences Face/Solid
inline BOPDS_VectorOfInterfZZ& BOPDS_DS::InterfZZ()
Purpose: Returns the collection of interferences Solid/Solid
inline Standard_Integer BOPDS_DS::NbInterfTypes()
Purpose: Returns the number of types of the interferences
have been added.
- class BOPDS_Tools
-method
inline Standard_Boolean BOPDS_Tools::IsInterfering
(const TopAbs_ShapeEnum theT)
has been added.
Purpose: Returns true if the type <theT> can be participant of an interference
- class BOPDS_ShapeInfo
-method
inline Standard_Boolean BOPDS_ShapeInfo::IsInterfering()const
has been added.
Purpose: Returns true if the object can be participant of an interference
- class BOPDS_ShapeInfo
-methods
void BOPAlgo_CheckerSI::PerformVZ()
Purpose: Computes Vertex/Solid interferences
void BOPAlgo_CheckerSI::PerformEZ()
Purpose: Computes Edge/Solid interferences
void BOPAlgo_CheckerSI::PerformFZ()
Purpose: Computes Face/Solid interferences
void BOPAlgo_CheckerSI::PerformZZ()
Purpose: Computes Solid/Solid interferences
have been added
Changes:
- class BOPDS_DS
- method:
Standard_Boolean BOPDS_DS::HasInterfShapeSubShapes
(const Standard_Integer theI1,
const Standard_Integer theI2,
const Standard_Boolean theFlag)const
has been modified.
Purpose:
Returns true if the shape with index theI1 is interfered with
- at least one sub-shape of the shape with index theI2 (theFlag=true)
--all sub-shapes of the shape with index theI2 (theFlag=false)
- class BOPDS_Tools
- method:
inline Standard_Integer BOPDS_Tools::TypeToInteger
(const TopAbs_ShapeEnum aType1,
const TopAbs_ShapeEnum aType2)
The method has been extended to treat */Solid interfertences.
- class BOPDS_Iterator
- constructors:
BOPDS_Iterator::BOPDS_Iterator();
BOPDS_Iterator::BOPDS_Iterator
(const Handle(NCollection_BaseAllocator)& theAllocator);
- method:
void BOPDS_Iterator::Prepare();
The constant number of types of the interferences has been changed by
the call: BOPDS_DS::NbInterfTypes();
- class BOPDS_IteratorSI
- method:
void BOPDS_IteratorSI::UpdateByLevelOfCheck(const Standard_Integer theLevel)
The constant number of types of the interferences has been changed by
the call: BOPDS_DS::NbInterfTypes();
- method:
void BOPDS_IteratorSI::Intersect()
The method has been extended to treat */Solid interfertences.
- class BOPAlgo_CheckerSI
- constructor:
BOPAlgo_CheckerSI::BOPAlgo_CheckerSI()
The constant number of types of the interferences has been changed by
the call: BOPDS_DS::NbInterfTypes();
- method:
void BOPAlgo_CheckerSI::SetLevelOfCheck(const Standard_Integer theLevel)
The constant number of types of the interferences has been changed by
the call: BOPDS_DS::NbInterfTypes();
- methods:
void BOPAlgo_CheckerSI::Perform()
void BOPAlgo_CheckerSI::PostTreat()
The methods have been extended to treat */Solid interfertences.
- class BOPAlgo_ArgumentAnalyzer
- method:
void BOPAlgo_ArgumentAnalyzer::TestSelfInterferences()
The method has been extended to treat */Solid interfertences.
Added test case bugs/modalg_5/bug24492
kgv [Wed, 18 Dec 2013 13:44:24 +0000 (17:44 +0400)]
0024482: Documentation - provide descipriprion of CSF_ShadersDirectory variable in the Overview
skv [Thu, 26 Dec 2013 11:29:45 +0000 (15:29 +0400)]
0024484: sprops gives incorrect matrix of inertia and moments
Added test case bugs/modalg_5/bug24484
abv [Tue, 24 Dec 2013 07:14:43 +0000 (11:14 +0400)]
0024494: Value of OCC_VERSION_DEVELOPMENT is not accounted in generated overview documentation
Parser of OCCT version corrected to include development macro in complete version number.
jgv [Tue, 17 Dec 2013 13:01:52 +0000 (17:01 +0400)]
0024475: Regression on OCCT6.6.0 relative to OCCT6.5.3: wrong result of ThruSections algorithm on two customer's wires
omy [Thu, 19 Dec 2013 10:17:33 +0000 (14:17 +0400)]
0024456: Graphic3d_MaterialAspect - use static assert instead of runtime exception
Graphic3d_MaterialAspect::NumberOfMaterials() : Standard_ASSERT_RAISE instead of run-time check is now used.
Replaced with Standard_STATIC_ASSERT
pkv [Tue, 10 Dec 2013 05:08:44 +0000 (09:08 +0400)]
0024157: Parallelization of assembly part of BO
New features
class BOPAlgo_BuilderSolid
-method:
void BOPAlgo_BuilderSolid::SetSolid(const TopoDS_Solid& theSolid) has been added.
Purpose: Sets the source solid <theSolid>
class BOPAlgo_BuilderSolid
-method:
const TopoDS_Solid& BOPAlgo_BuilderSolid::Solid()const
has been added.
Purpose: Returns the source solid
Auxiliary classes
BOPAlgo_BuilderSolidFunctor
BOPAlgo_BuilderSolidCnt
have been added.
Purpose: The classes provide the interface and implementation of the parallel computations.
class BOPTools_AlgoTools
-method:
Standard_Boolean BOPTools_AlgoTools::IsOpenShell(const TopoDS_Shell& theShell) has been added.
Purpose: Returns true if the shell <theShell> is open
class BOPTools_AlgoTools
-method:
Standard_Boolean BOPTools_AlgoTools::IsInvertedSolid(const TopoDS_Solid& theSolid) has been added.
Purpose: Returns true if the solid <theSolid> is inverted
class BOPDS_DS
-protected method:
void BOPDS_DS::BuildBndBoxSolid(const Standard_Integer theIndex, Bnd_Box& theBoxS) has been added.
The method computes bouding box <theBoxS> for the solid with DS-index <theIndex>
Changes
class BOPDS_DS
- method:
void BOPDS_DS::Init()
The block to compute bouding box for the solids has been added.
class BOPAlgo_Builder
- method:
void BOPAlgo_Builder::FillIn3DParts
(BOPCol_DataMapOfShapeListOfShape& theInParts,
BOPCol_DataMapOfShapeShape& theDraftSolids,
const BOPCol_BaseAllocator& theAllocator)
The order of treatment of the unbalanced binary tree of overlapped bounding boxes has been changed
class BOPAlgo_Builder
- method:
void BOPAlgo_Builder::BuildSplitSolids
(BOPCol_DataMapOfShapeListOfShape& theInParts,
BOPCol_DataMapOfShapeShape& theDraftSolids,
const BOPCol_BaseAllocator& theAllocator)
The algorithm has been adapted to provide the parallel computations
bugmaster [Thu, 19 Dec 2013 09:26:32 +0000 (13:26 +0400)]
Changing OCCT version to 6.7.1 and define OCC_VERSION_DEVELOPMENT to "dev"
abv [Fri, 13 Dec 2013 12:50:27 +0000 (16:50 +0400)]
0024428: Implementation of LGPL license
OCCT documentation updated to refer to LGPL as applicable license
bugmster [Wed, 4 Dec 2013 17:18:05 +0000 (21:18 +0400)]
0024428: Implementation of LGPL license
Update of OCCT samples source code due to moving to LGPL license
bugmster [Wed, 4 Dec 2013 17:05:36 +0000 (21:05 +0400)]
0024428: Implementation of LGPL license
The copying permission statements at the beginning of source files updated to refer to LGPL.
Copyright dates extended till 2014 in advance.
vro [Tue, 17 Dec 2013 08:27:29 +0000 (12:27 +0400)]
0024166: Unable to create file with "Save" menu of voxeldemo Qt sample
Turning on the light to display the shapes of the sample.
ibs [Tue, 17 Dec 2013 06:17:09 +0000 (10:17 +0400)]
0024469: cmake mfcsample project skippes ParamsFacesPage
add ParamsFacesPage.cpp and ParamsFacesPage.h in mfcsample cmake project
Unrelated changes: common samples include paths have lower priority than specific ones
Unrelated changes: debug tbb cmake seeks with _debug postfix
ibs [Mon, 16 Dec 2013 14:05:20 +0000 (18:05 +0400)]
0024426: CMake ignores 3rd party options; env.sh does not set "CASROOT" environment variable
unrelative changes: #!/bin/bash line was added to env.sh.in
CMake: debug environment was removed for the time being; env.sh and env.bat templates were refactored
possibility of using of redundant command line parameters were removed from env.sh & env.bat scripts
tcl installation corrected;
Removed "echo off" from shell script
aba [Mon, 16 Dec 2013 14:10:58 +0000 (18:10 +0400)]
0024471: Erasing of the shape in HLR sample leads to sample crash.
abv [Fri, 13 Dec 2013 11:23:40 +0000 (15:23 +0400)]
Preparation for OCCT 6.7.0 release: 'beta' removed from OCCT version
kgv [Sun, 15 Dec 2013 12:25:16 +0000 (16:25 +0400)]
0024466: Visualization - PrsMgr_Presentation3d::Erase() now leads to incomplete destruction of Graphic3d_Structure
szv [Thu, 12 Dec 2013 08:32:51 +0000 (12:32 +0400)]
0024440: Regressions in products test group sat/doc_1
Check for closed shell is corrected
aba [Wed, 11 Dec 2013 15:16:07 +0000 (19:16 +0400)]
0024425: Improve usage ergonomics of new dimension presentations
- Added format for value string.
- Construction and validness.
- Revise modification of properties and update of presentations.
- Units moved to Drawer; code revisions.
- Length and angle initialization was changed. Type of geometry filed was added to AIS_Dimension.
- Method for test case bugs/vis/buc60915 was corrected. Description of the dimension classes was corrected.
- Fixed initialization of angle and length.
Pawel [Mon, 9 Dec 2013 16:15:39 +0000 (17:15 +0100)]
0024448: Possible copy-paste bug in IGESGeom_SplineCurve.cxx
Replaced 'allXPolynomials' with 'allYPolynomials' to avoid redundancy.
Pawel [Tue, 10 Dec 2013 09:26:10 +0000 (10:26 +0100)]
0024451: Logical conjunction always evaluates to false
As the variable gets casted on Standard_Byte it is checked to be within the range <0; 255>
kgv [Wed, 11 Dec 2013 05:31:04 +0000 (09:31 +0400)]
0024455: Graphic3d_Group - restore Marker() method to simplify porting
gka [Wed, 4 Dec 2013 06:47:40 +0000 (10:47 +0400)]
0024283: STEP read failes to read unbound advanced_face
Fix to avoid exception if sphere is written without bounds.
Pawel [Tue, 10 Dec 2013 10:05:08 +0000 (14:05 +0400)]
0024452: TKOpenGl - Memory leak in OpenGl_ShaderManager
kgv [Tue, 10 Dec 2013 08:44:10 +0000 (12:44 +0400)]
0024450: TKOpenGl - Fixed pipeline materials update optimization does not distinguish front/back faces
ibs [Wed, 27 Nov 2013 13:11:25 +0000 (17:11 +0400)]
0024403: BRepBuilderAPI_Sewing should have get/set Context methods
Methods to get/set context introduced
emv [Mon, 9 Dec 2013 07:01:49 +0000 (11:01 +0400)]
0024434: The result of Boolean FUSE operation is not correct
Small correction in splitting SEAM edge on face.
apl [Sat, 7 Dec 2013 10:07:41 +0000 (14:07 +0400)]
0024389: Invalid hilight of AIS dimension line in local selection
- Fixed invalid presentation of dimension highlight.
- Fixed bug on switching between selection modes. Individual sensitive entities generated for each selection mode.
- Revised selection: AIS_DimensionSelectionMode enumeration added, redundant AIS_DimensionDisplayMode is removed.
- Revised entity owner usage: used standard SelectMgr_EntityOwner for neutral selection, AIS_DimensionOwner for "line", "text" selection modes.
- Made arrows selectable.
- Got rid of predefined arrow angle. The arrow angle is now taken from dimension aspect.
- The 3D text is now centered by bounding box for better alignment.
nbv [Wed, 4 Dec 2013 11:07:25 +0000 (15:07 +0400)]
0024422: Wrong result done by FaceClassifier algorithm
Control of out of boundaries by finding circle-point extrema.
dbp [Thu, 12 Dec 2013 15:22:02 +0000 (19:22 +0400)]
0024459: Exception during clearing object in test case v3d/raytrace/connected in DEBUG mode
aba [Thu, 28 Nov 2013 15:50:58 +0000 (19:50 +0400)]
0024391: Erased AIS object can not be displayed in AIS_InteractiveContext after AIS_InteractiveContext::Remove(): added presentations removing after presentable object is removed from context.
vremove command was corrected. Test case was corrected.
few mistakes corrected
bugmaster [Fri, 6 Dec 2013 11:41:07 +0000 (15:41 +0400)]
Adjusting test cases for current state of OCCT
1. Modified test cases to improve using of Japanese characters
bugs vis bug22149
bugs vis bug22796_2
2. Modified test case bugs vis bug23813 to avoid regression caused by using vdump command with non-default parameters on remote PCs
bugs vis bug23813
3. Behavior change of test case de iges_2 B1 in DEBUG mode on Linux and Windows platforms (OCC24442)
de iges_2 B1
gka [Wed, 4 Dec 2013 06:37:41 +0000 (10:37 +0400)]
0024279: bug in Standard_Boolean STEPCAFControl_Reader::Transfer
dbv [Thu, 5 Dec 2013 11:43:48 +0000 (15:43 +0400)]
0024420: Add methods to switch the type of sensitivity in AIS_Circle and AIS_Plane
Added methods to AIS_Circle and AIS_Plane for switching type of sensitivity
By default AIS_Circle and AIS_Plane have boundary sensitivity
aba [Thu, 5 Dec 2013 11:39:48 +0000 (15:39 +0400)]
0024372: HLR Sample: erased objects are shown in HLR
Compilation errors were corrected.
Removed .aps files
Sample paths fields were updated to read help file from sample folder.
ifv [Thu, 5 Dec 2013 11:36:22 +0000 (15:36 +0400)]
0024359: Crash on BRepAlgoAPI_Fuse
Test case for issue CR24359
gka [Thu, 5 Dec 2013 11:26:01 +0000 (15:26 +0400)]
0023921: IGES reader cannot map subshapes colors inside nested assemblies
Modification to avoid creation of redundant labels in XCAF for any shapes belonging compound even if colors are not defined for them.
Fix to avoid compiler warning.
Fix for regression for test case de iges_2 A6
Test case for issue CR23921
ifv [Thu, 5 Dec 2013 11:16:11 +0000 (15:16 +0400)]
0024313: BRepAlgoAPI_Section and IntTools_FaceFace aren't written to handle Geom_SurfaceOfLinearExtrusion
Test case for issue CR24313
aba [Thu, 5 Dec 2013 11:03:53 +0000 (15:03 +0400)]
0023931: Incorrect image export code in MFC sample: Added OCC_BaseDoc::ExportView() method to unify image export procedure in all MFC samples.
Compilation errors were corrected.
ski [Thu, 28 Nov 2013 14:10:25 +0000 (18:10 +0400)]
0024304: Eliminate GCC compiler warning about exceeding maximum value for type in case label
Methods OSD::Handler(), OSD::SegvHandler(), OSD::WntHandler() were made static
Type cast were removed when pointer on signal handler function is used
Enumeration OSD_Signal removed
mkv [Fri, 29 Nov 2013 07:56:12 +0000 (11:56 +0400)]
Deleting MSVC compiler warning in BRepBuilderAPI_Sewing.cxx(920) caused integration of fix for 24390
kgv [Thu, 28 Nov 2013 09:55:52 +0000 (13:55 +0400)]
0023813: TKOpenGl, OpenGl_Texture ignores stride image property
Added test case tests/bugs/vis/bug23813
ysn [Thu, 28 Nov 2013 08:17:08 +0000 (12:17 +0400)]
0024336: Content of OCCT documentation should be updated. Iter 2
Minor corrections in documentation (dev guides)
Finalized brep_wp guide (by DLN); entirely removed non-PNG images to provide smooth PDF generation; Restored cross-guide links in Technical overview; small improvements and editing in GIT guide.
Resized some images to better fit on PDF pages.
gka [Thu, 28 Nov 2013 08:13:15 +0000 (12:13 +0400)]
0024008: ShapeAnalysis_Surface causes exception in Geom_OffsetSurface
Refactoring on current master fix for bug
0024008: ShapeAnalysis_Surface causes exception in Geom_OffsetSurface.
And modified test scripts in order to avoid report regressions
Test cases for issue CR24008
ski [Tue, 26 Nov 2013 14:17:10 +0000 (18:17 +0400)]
0024399: ICC warnings 3280 "declaration hides..."
Renamed local variables to avoid ICC compiler warnings about repeated names
apl [Thu, 28 Nov 2013 07:32:53 +0000 (11:32 +0400)]
0024396: "vselmode" - disable auto loading of objects into Local Context
Corrected DRAWEXE "vselmode" command.
Added test case.
corrected test cases
- 24293 failed due to initialization view without "name".
- 24374 adjusted, the test case was initially incorrect.
Modified test cases bugs/vis/bug24293 and bugs/vis/bug24374
aml [Thu, 28 Nov 2013 07:25:41 +0000 (11:25 +0400)]
0024398: Output of extrema draw-command has various format on optimise and debug modes
Fixed creation of extrema curve in debug mode.
Deleted space between ";" and "V" in debug output to make "llength" DRAW funcion work correctly in debug mode.
Deleted TODOs in tests/bugs/modalg_5/bug24327
Deleted TODOs in test cases with improvement in extrema output. Increased cpulimit in de, boolean and perf.
gka [Thu, 28 Nov 2013 07:19:34 +0000 (11:19 +0400)]
0024383: Access violation during STEP file import
Protection for null magnitude of vector written in file was added.
Test cases for issue CR24383