0027126: Create command checktrinfo to verify meshes
[occt.git] / tests /
2016-02-05 ski0027126: Create command checktrinfo to verify meshes
2016-02-05 ifv0027063: BRepGProps raises exception on edge with no...
2016-02-05 ski0026833: Create command checkview containing all viewer...
2016-02-04 ifv0027110: Regression: Draw command "parameters" can...
2016-02-04 isk0026726: Draw Harness, ViewerTest - AIS_InteractiveCont...
2016-01-28 apn0027094: Create command checkdump for parsing dumps...
2016-01-28 apn0027109: Modifiy test cases using procedure checklength
2016-01-28 vpa0027083: Visualization, Ray Tracing - shape with visibl...
2016-01-28 azv0027048: BSpline cache is always wrong outside of surface
2016-01-28 akz0025574: gp_YawPitchRoll Euler Angle computation gives...
2016-01-21 nbv0026132: Invalid result of boolean operation
2016-01-21 isn0027085: ShapeUpgrade_UnifySameDomain very large perfor...
2016-01-21 ika0027078: Exception in ShapeFixIntersectionTool::UnionVe...
2016-01-21 ski0021875: Section of face by plane produces invalid...
2016-01-21 abv0024836: Stack overflow when raising exception in low...
2016-01-15 isn0027045: firsthole & holend commands work incorrectly
2016-01-14 ika0026989: [Regression in 6.9.0] Export of a reversed...
2016-01-13 aml0027059: Point->Curve Projection/Extrema fails [OCCT...
2016-01-13 msv0027032: [Regression to 6.9.1] Result of bcut has the...
2016-01-13 ika0026931: [Regression in 6.9.0] Exporting a face throws...
2016-01-13 ski0026684: Big tolerance values of the intersection curves
2016-01-13 emv27002: Test cases for Set-42
2016-01-13 apv0026513: Offset API not returning result (seems to...
2016-01-13 apv0021670: BOP section produces bad result
2016-01-13 pdn0027021: TopExp::Vertices performance optimization
2016-01-13 apv0026923: Operation CUT leads to faulty shape
2016-01-11 abv0027058: AIS_ColorScale defines methods SetColor and...
2015-12-25 bugmasterFinal updates before release
2015-12-25 apv0026354: Invalid result of General Fuse on wire and...
2015-12-25 apv0026580: BRepProj_Projection does not provide any results
2015-12-25 apv0026535: Boolean Cut does not work on shell and solids
2015-12-24 nbv0027029: Possible regression in test de iges_1 L6 becau...
2015-12-23 mkv0026837: SameParameter algorithm throws an exception
2015-12-23 abv0027026: Modeling -- Improve AppCont_LeastSquare::AppCo...
2015-12-23 vpa0026960: Visualization, TKOpenGl - update transformatio...
2015-12-23 msv0026619: Tolerances of operands are modified using bop
2015-12-22 ifv0026837: SameParameter algorithm throws an exception
2015-12-22 akz0027000: Invalid result of ShapeUpgrade_UnifySameDomain
2015-12-22 ifv0027010: Wrong classification of the point relatively...
2015-12-20 bugmasterAdding checks in test cases
2015-12-18 bugmasterCorrection of test case
2015-12-17 vpa0026973: Visualization - selection of entities hidden...
2015-12-17 ibs0026229: Add the possibility in OCAF to open/save a...
2015-12-17 nbv0026576: Wrong result obtained by intersection algorithm.
2015-12-17 gka0024595: STEP import missing surfaces
2015-12-17 vpa0026959: Visualization - cannot select edge of the...
2015-12-17 nbv0026841: Boolean operation "bsection" produce invalid...
2015-12-17 gka0026708: Fix shape did not fix attached shape. Seam...
2015-12-17 vro0023465: Weird InsertBefore, InsertAfter and Remove...
2015-12-17 vpa0026945: Visualization - selection does not work after...
2015-12-17 mkv0023666: Wrong section curve between attached faces
2015-12-17 mkv0026523: Wrong result of section algorithm
2015-12-17 isk0026975: Visualization, TKOpenGl - handle triangle...
2015-12-17 mkv0025342: [Regression] BRepAlgoAPI_Section returns wrong...
2015-12-17 mkv0026334: BRepOffsetAPI_MakePipeShell returns the wrong...
2015-12-17 mkv0026188: Incorrect PCurve creation
2015-12-17 mkv0026327: Performance degradation from version 6.8.0...
2015-12-17 nbv0026896: Wrong result of bsection algorithm
2015-12-17 nbv0026848: Result of BO depends on arguments order
2015-12-17 mkv0026427: Draft angle algorithm produces wrong shape
2015-12-11 skiModification of test cases in accordance with changes...
2015-12-10 ski0025945: Make stable checking of shape global propertie...
2015-12-10 nbv0024417: BRepAlgoAPI_Section fails on attached shapes
2015-12-10 emv0026955: Invalid result of General Fuse operation
2015-12-10 szy0026290: It is neccessary to separate visualization...
2015-12-10 emv0026971: Test cases for Set-45
2015-12-10 emv0026954: Test cases for Set-44
2015-12-10 emv0026952: Test cases for Set-41
2015-12-10 emv0026953: Test cases for Set-43
2015-12-04 ika0026859: Export of GDT from XCAF to STEP
2015-12-04 nbv0026431: Can't cut a sphere from a cylinder
2015-12-04 mgn0026922: Huge performance issue writing data to the...
2015-12-04 kgv0026940: Visualization, TKOpenGl - capping plane should...
2015-11-27 apl0026658: Unexpected selection in the context using...
2015-11-27 apl0026792: Visualization, Graphic3d - Z-fit support for...
2015-11-27 azv0026914: [Regression 7.0alpha] Hang in surface approxim...
2015-11-27 azv0026897: BRepBuilderAPI_Copy does not copy polygons
2015-11-27 azv0026871: [Regression in 6.9.0] Projecting a curve hangs...
2015-11-26 nbv0026884: Cylinder/Cylinder intersection algorithm throw...
2015-11-26 aba0025549: Visualization - do not crash on attempt to...
2015-11-19 abv0000670: Problem with the Print method.
2015-11-19 emv0025926: 3D offset in mode "Complete" with Join type...
2015-11-19 pdn0026664: Triangulating a very small polygon fails
2015-11-19 azv0026252: GeomAdaptor_Surface should use inner adaptor...
2015-11-19 vpa0026870: Visualization - deactivated selections are...
2015-11-19 isk0026790: Visualization, TKOpenGl - apply view resolutio...
2015-11-19 jgv0026681: BRepPrimAPI_MakeRevol creates faulty shape
2015-11-19 ifv0024890: Result of uniform scaling is invalid
2015-11-12 aba0026056: AIS_LengthDimension can not build dimension...
2015-11-12 emv0026855: Draw commands to debug Boolean Operations...
2015-11-12 emv0026798: Boolean operations: keep desired cells and...
2015-11-05 jgv0026757: Wrong history of a fillet
2015-11-05 apn0026744: Boolean Cut builds incorrect result
2015-11-05 ink0026689: Necessary to improve STEPCAFControl_Reader...
2015-10-29 nbv0026699: Wrong section curves
2015-10-29 aml0024658: fixshape changes source shape
2015-10-29 ifv0026426: Draft angle algorithm modifies input argument...
2015-10-29 kgv0026711: Visualization, TKOpenGl - support creation...
2015-10-29 apn0021107: The computed section is incomplete
2015-10-22 ifv0026470: BRepFill_Evolved: exception and invalid result
next