0026855: Draw commands to debug Boolean Operations Algorithm
[occt.git] / tests / bugs / modalg_6 /
2015-11-05 jgv0026757: Wrong history of a fillet
2015-11-05 apn0026744: Boolean Cut builds incorrect result
2015-10-29 nbv0026699: Wrong section curves
2015-10-29 ifv0026426: Draft angle algorithm modifies input argument...
2015-10-29 apn0021107: The computed section is incomplete
2015-10-22 ifv0026470: BRepFill_Evolved: exception and invalid result
2015-10-22 aml0026775: Bad result of section algorithm
2015-10-15 aml0026443: Offset surface hangs up
2015-10-15 nbv0026746: Method gp_Torus::Coefficients(...) returns...
2015-10-15 jgv0026736: Errors in BRepOffsetAPI_MakeOffset: overlappin...
2015-10-15 abv0026622: Tests - Avoid using dlog and decho commands...
2015-10-08 ifv0026609: Wrong result obtained by solid classifier...
2015-10-08 ski0026742: Update test cases for using checknbshapes...
2015-10-08 isn0026396: Taper API result differs run-to-run for identi...
2015-10-08 jgv0026717: Error in IntPatch_PrmPrmIntersection: change...
2015-10-08 nbv0026750: Method IsNormal(...) for gp_Vec2d returns...
2015-10-01 emv0026565: Compsolid after cut becomes compound of solids
2015-10-01 emv0026718: Big tolerance value of the edge in the result...
2015-10-01 ifv0026607: Wrong value of area.
2015-09-28 apvAdjusting test cases for current state of occt
2015-09-24 aml0026525: Wrong result obtained by curve / surface inter...
2015-09-24 isn0026701: BOPAlgo_Builder::Perform crash.
2015-09-17 aml0026196: Wrong result obtained by projection algorithm.
2015-09-17 pkv0026616: Memory leak in IntTools_Context::Hatcher
2015-09-17 ifv0026588: SIGSEGV in BRepFeat_MakeDPrism::Perform()
2015-09-17 nbv0026674: Performance regression in BRepExtrema_DistShap...
2015-09-17 nbv0026687: SIGSEGV in BRepBuilderAPI_MakeFace
2015-09-17 nbv0026567: Exception in Boolean intersection command
2015-09-17 nbv0026640: ShapeFix_Edge::FixAddPCurve problem in OCC 6.8
2015-09-17 nbv0026099: Wrong result done by 2d intersection algorithm
2015-09-11 apvAdjusting test cases for current state of OCCT
2015-09-10 nbv0026621: Boolean Cut does not work on two solids
2015-09-10 mkv0026587: Infinite calculations of BRepOffset_MakeOffset
2015-09-10 mkv0026575: Normal projection of an edge to a face is...
2015-09-10 jgv0026636: BRepOffsetAPI_ThruSections algorithm crashes...
2015-09-10 abv0026627: [Regression] Shape Healing hangs as of OCC...
2015-09-10 abv0026647: BRepTools::UVBounds() computes zero range...
2015-09-10 isn0026288: Offset on faces with opposite orientation
2015-09-10 nbv0026313: Method BRepBuilderAPI_GTransform::ModifiedShap...
2015-09-10 jgv0026173: Wrong result of ChFi3d_ChBuilder algorithm...
2015-09-10 abv0024097: BRepAlgoAPI_Section returns wrong result
2015-09-04 aml0026556: Infinite calculations of BRepOffset_MakeOffset
2015-09-03 pkv0026582: Wrong result obtained by Common operator
2015-09-03 nbv0026251: Section curve cannot be found
2015-09-03 aml0026440: Invalid shape as a result of solid constructio...
2015-08-27 isn0026498: BRepOffsetAPI_MakeOffset causes segmentation...
2015-08-21 mkvAdjusting testing case
2015-08-20 dbv0026553: Out of range exception in BRepFill_Pipe::FindEdge
2015-08-20 jgv0026554: Error in IntPatch_PrmPrmIntersection: initial...
2015-08-13 jgv0026540: Errors in BRepOffsetAPI_MakeOffset: infinite...
2015-08-13 aml0021564: Intersection of two planar faces produces...
2015-08-06 aml0026493: BRepProj_Projection failed to project a wire...
2015-08-06 pkv0026243: Boolean operations failed on shapes with fillets
2015-08-06 mkv0026442: Access violation in BRepOffset_MakeOffset
2015-07-30 apn0026447: Performance degradation intersecting cylindric...
2015-07-30 apv0026496: Error in use the BRepCheck_Analyzer
2015-07-29 aml026464: BRepOffset_MakeOffset does not provide valid...
2015-07-29 jgv0026481: Incorrect result of BRepOffsetAPI_MakeOffset...
2015-07-29 nbv0026484: BRepExtrema_DistShapeShape hangs
2015-07-29 aml0026473: Offset API fails to create offset shape
2015-07-29 emv0026420: BOPAlgo_Builder resets "Closed" flag in the...
2015-07-29 emv0026444: Boolean operation "bcut" gives invalid result...
2015-07-28 isn0026466: UnifySameDomain creates invalid result shape...
2015-07-28 emv0026393: Add draw commands to evaluate history of modif...
2015-07-22 nbv0026310: Very slow boolean cut operations on cylinders
2015-07-21 aml0026418: Unjustified limitation on tolerance of a input...
2015-07-20 nbv0026308: Segmentation fault in BSplCLib::LocateParameter
2015-07-20 ifv0026406: BRepPrimAPI_MakeRevol crash when rotating...
2015-07-20 ifv0026387: BRepPrimAPI_MakePrism crash when extruding...
2015-07-09 emv0026379: Wrong result produced by the volume maker...
2015-07-09 aml0026356: Wrong result done by projection algorithm
2015-07-03 nbv0025613: Wrong distance found by xdistef command for...
2015-07-02 mkv0026352: Wrong intersection points found
2015-07-02 jgv0026332: BRepOffsetAPI_ThruSections algorithm fails...
2015-07-02 jgv0026296: Errors in BRepOffsetAPI_MakeOffset: failure...
2015-06-25 ifv0026330: BRepOffsetAPI_ThruSections creates invalid...
2015-06-25 emv0026316: Infinite modification of the shapes in General...
2015-06-18 ika0026241: Sewing algorithm computes tolerance of joint...
2015-06-18 ifv0026305: BRepFeat_MakePrism returns inconsistent result...
2015-06-18 nbv0025820: No Intersection Curves between surface of...
2015-06-10 nbv0026151: Wrong result obtained by intersection algorithm.
2015-06-04 msv0026206: BRepClass_FaceClassifier returns TopAbs_OUT...
2015-06-04 gka0024357: BRepBuilderAPI_Sewing returns result with...
2015-06-04 aml0026075: Make Extrema_GenExtCC return IsParallel flag...
2015-06-04 nbv0026193: Incomplete intersection curve
2015-06-04 nbv0026281: BRepCheck_Edge::Tolerance() raises exception...
2015-06-04 ifv0026233: BRepOffset_MakeOffset makes incorrect result
2015-05-28 jgv0026185: BRepOffsetAPI_MakeOffset: regressions on some...
2015-05-28 pkv0026253: Wrong result obtained by General Fuse operator.
2015-05-28 azv0024682: Move out B-spline cache from curves and surfac...
2015-05-28 aml0026063: GeomAPI_ExtremaCurveSurface have inexact API
2015-05-28 dbp0026180: Modeling Algorithms - Provide shape self-inter...
2015-05-21 jgv0026201: Wrong processing of dissymetric chamfer: order...
2015-05-21 nbv0026197: Incomplete intersection curve
2015-05-21 pkv0026224: Wrong result obtained by Common operator.
2015-05-21 emv0026218: Wrong result done by General Fuse algorithm
2015-05-14 jgv0026202: Wrong result of chamfer on cylindrical surface...
2015-05-08 mkv0025271: Wrong result obtained by solid classifier...
2015-05-08 nbv0025890: Intersection algorithm produces curves overlaped
2015-05-06 mkv0026010: [OCCT 6.8.0 regression] BRepFeat_SplitShape...
next