anAddrStr = ost.str();
TCollection_AsciiString aStr =
- TCollection_AsciiString("[").Cat( anAddrStr.c_str() ).Cat("]");
+ TCollection_AsciiString("[").Cat(anAddrStr.c_str()).Cat("]");
return aStr;
}
//purpose :
//=======================================================================
-STEPCAFControl_Reader::STEPCAFControl_Reader ():
- myColorMode( Standard_True ),
- myNameMode ( Standard_True ),
- myLayerMode( Standard_True ),
- myPropsMode( Standard_True ),
- mySHUOMode ( Standard_False ),
- myGDTMode ( Standard_True ),
- myMatMode(Standard_True),
- myViewMode(Standard_True)
+STEPCAFControl_Reader::STEPCAFControl_Reader() :
+ myColorMode(Standard_True),
+ myNameMode(Standard_True),
+ myLayerMode(Standard_True),
+ myPropsMode(Standard_True),
+ mySHUOMode(Standard_False),
+ myGDTMode(Standard_True),
+ myMatMode(Standard_True),
+ myViewMode(Standard_True)
{
STEPCAFControl_Controller::Init();
}
//purpose :
//=======================================================================
-STEPCAFControl_Reader::STEPCAFControl_Reader (const Handle(XSControl_WorkSession)& WS,
- const Standard_Boolean scratch) :
- myColorMode( Standard_True ),
- myNameMode ( Standard_True ),
- myLayerMode( Standard_True ),
- myPropsMode( Standard_True ),
- mySHUOMode ( Standard_False ),
- myGDTMode ( Standard_True ),
- myMatMode(Standard_True),
- myViewMode(Standard_True)
+STEPCAFControl_Reader::STEPCAFControl_Reader(const Handle(XSControl_WorkSession)& WS,
+ const Standard_Boolean scratch) :
+ myColorMode(Standard_True),
+ myNameMode(Standard_True),
+ myLayerMode(Standard_True),
+ myPropsMode(Standard_True),
+ mySHUOMode(Standard_False),
+ myGDTMode(Standard_True),
+ myMatMode(Standard_True),
+ myViewMode(Standard_True)
{
STEPCAFControl_Controller::Init();
- Init ( WS, scratch );
+ Init(WS, scratch);
}
//purpose :
//=======================================================================
-void STEPCAFControl_Reader::Init (const Handle(XSControl_WorkSession)& WS,
- const Standard_Boolean scratch)
+void STEPCAFControl_Reader::Init(const Handle(XSControl_WorkSession)& WS,
+ const Standard_Boolean scratch)
{
-// necessary only in Writer, to set good actor: WS->SelectNorm ( "STEP" );
- myReader.SetWS (WS,scratch);
+ // necessary only in Writer, to set good actor: WS->SelectNorm ( "STEP" );
+ myReader.SetWS(WS, scratch);
myFiles.Clear();
}
//purpose :
//=======================================================================
-IFSelect_ReturnStatus STEPCAFControl_Reader::ReadFile (const Standard_CString filename)
+IFSelect_ReturnStatus STEPCAFControl_Reader::ReadFile(const Standard_CString filename)
{
- return myReader.ReadFile ( filename );
+ return myReader.ReadFile(filename);
}
//purpose :
//=======================================================================
-Standard_Integer STEPCAFControl_Reader::NbRootsForTransfer ()
+Standard_Integer STEPCAFControl_Reader::NbRootsForTransfer()
{
return myReader.NbRootsForTransfer();
}
//purpose :
//=======================================================================
-Standard_Boolean STEPCAFControl_Reader::TransferOneRoot (const Standard_Integer num,
- Handle(TDocStd_Document) &doc)
+Standard_Boolean STEPCAFControl_Reader::TransferOneRoot(const Standard_Integer num,
+ Handle(TDocStd_Document) &doc)
{
TDF_LabelSequence Lseq;
- return Transfer ( myReader, num, doc, Lseq );
+ return Transfer(myReader, num, doc, Lseq);
}
//purpose :
//=======================================================================
-Standard_Boolean STEPCAFControl_Reader::Transfer (Handle(TDocStd_Document) &doc)
+Standard_Boolean STEPCAFControl_Reader::Transfer(Handle(TDocStd_Document) &doc)
{
TDF_LabelSequence Lseq;
- return Transfer ( myReader, 0, doc, Lseq );
+ return Transfer(myReader, 0, doc, Lseq);
}
//purpose :
//=======================================================================
-Standard_Boolean STEPCAFControl_Reader::Perform (const Standard_CString filename,
- Handle(TDocStd_Document) &doc)
+Standard_Boolean STEPCAFControl_Reader::Perform(const Standard_CString filename,
+ Handle(TDocStd_Document) &doc)
{
- if ( ReadFile ( filename ) != IFSelect_RetDone ) return Standard_False;
- return Transfer ( doc );
+ if (ReadFile(filename) != IFSelect_RetDone) return Standard_False;
+ return Transfer(doc);
}
-
+
//=======================================================================
//function : Perform
//purpose :
//=======================================================================
-Standard_Boolean STEPCAFControl_Reader::Perform (const TCollection_AsciiString &filename,
- Handle(TDocStd_Document) &doc)
+Standard_Boolean STEPCAFControl_Reader::Perform(const TCollection_AsciiString &filename,
+ Handle(TDocStd_Document) &doc)
{
- if ( ReadFile ( filename.ToCString() ) != IFSelect_RetDone ) return Standard_False;
- return Transfer ( doc );
+ if (ReadFile(filename.ToCString()) != IFSelect_RetDone) return Standard_False;
+ return Transfer(doc);
}
-
+
//=======================================================================
//function : ExternFiles
//purpose :
//=======================================================================
-const NCollection_DataMap<TCollection_AsciiString, Handle(STEPCAFControl_ExternFile)>& STEPCAFControl_Reader::ExternFiles () const
+const NCollection_DataMap<TCollection_AsciiString, Handle(STEPCAFControl_ExternFile)>& STEPCAFControl_Reader::ExternFiles() const
{
return myFiles;
}
-
+
//=======================================================================
//function : ExternFile
//purpose :
//=======================================================================
-Standard_Boolean STEPCAFControl_Reader::ExternFile (const Standard_CString name,
- Handle(STEPCAFControl_ExternFile) &ef) const
+Standard_Boolean STEPCAFControl_Reader::ExternFile(const Standard_CString name,
+ Handle(STEPCAFControl_ExternFile) &ef) const
{
ef.Nullify();
- if ( myFiles.IsEmpty() || !myFiles.IsBound ( name ) )
+ if (myFiles.IsEmpty() || !myFiles.IsBound(name))
return Standard_False;
- ef = myFiles.Find ( name );
+ ef = myFiles.Find(name);
return Standard_True;
}
//purpose :
//=======================================================================
-STEPControl_Reader &STEPCAFControl_Reader::ChangeReader ()
+STEPControl_Reader &STEPCAFControl_Reader::ChangeReader()
{
return myReader;
}
-
+
//=======================================================================
//function : Reader
//purpose :
//=======================================================================
-const STEPControl_Reader &STEPCAFControl_Reader::Reader () const
+const STEPControl_Reader &STEPCAFControl_Reader::Reader() const
{
return myReader;
}
-
+
//=======================================================================
//function : FillShapesMap
//purpose : auxiliary: fill a map by all compounds and their components
//=======================================================================
-static void FillShapesMap (const TopoDS_Shape &S, TopTools_MapOfShape &map)
+static void FillShapesMap(const TopoDS_Shape &S, TopTools_MapOfShape &map)
{
TopoDS_Shape S0 = S;
TopLoc_Location loc;
- S0.Location ( loc );
- map.Add ( S0 );
- if ( S.ShapeType() != TopAbs_COMPOUND ) return;
- for ( TopoDS_Iterator it(S); it.More(); it.Next() )
- FillShapesMap ( it.Value(), map );
+ S0.Location(loc);
+ map.Add(S0);
+ if (S.ShapeType() != TopAbs_COMPOUND) return;
+ for (TopoDS_Iterator it(S); it.More(); it.Next())
+ FillShapesMap(it.Value(), map);
}
//purpose : basic working method
//=======================================================================
-Standard_Boolean STEPCAFControl_Reader::Transfer (STEPControl_Reader &reader,
- const Standard_Integer nroot,
- Handle(TDocStd_Document) &doc,
- TDF_LabelSequence &Lseq,
- const Standard_Boolean asOne)
+Standard_Boolean STEPCAFControl_Reader::Transfer(STEPControl_Reader &reader,
+ const Standard_Integer nroot,
+ Handle(TDocStd_Document) &doc,
+ TDF_LabelSequence &Lseq,
+ const Standard_Boolean asOne)
{
reader.ClearShapes();
Standard_Integer i;
-
+
// Read all shapes
Standard_Integer num = reader.NbRootsForTransfer();
- if ( num <=0 ) return Standard_False;
- if ( nroot ) {
- if ( nroot > num ) return Standard_False;
- reader.TransferOneRoot ( nroot );
+ if (num <= 0) return Standard_False;
+ if (nroot) {
+ if (nroot > num) return Standard_False;
+ reader.TransferOneRoot(nroot);
}
else {
- for ( i=1; i <= num; i++ ) reader.TransferOneRoot ( i );
+ for (i = 1; i <= num; i++) reader.TransferOneRoot(i);
}
num = reader.NbShapes();
- if ( num <=0 ) return Standard_False;
+ if (num <= 0) return Standard_False;
// Fill a map of (top-level) shapes resulting from that transfer
// Only these shapes will be considered further
TopTools_MapOfShape ShapesMap, NewShapesMap;
- for ( i=1; i <= num; i++ ) FillShapesMap ( reader.Shape(i), ShapesMap );
-
+ for (i = 1; i <= num; i++) FillShapesMap(reader.Shape(i), ShapesMap);
+
// Collect information on shapes originating from SDRs
// this will be used to distinguish compounds representing assemblies
// from the ones representing hybrid models and shape sets
Handle(TColStd_HSequenceOfTransient) SeqPDS = new TColStd_HSequenceOfTransient;
- for (i = 1; i <= nb; i ++) {
+ for (i = 1; i <= nb; i++) {
Handle(Standard_Transient) enti = Model->Value(i);
- if(enti->IsKind(STANDARD_TYPE(StepRepr_ProductDefinitionShape))) {
+ if (enti->IsKind(STANDARD_TYPE(StepRepr_ProductDefinitionShape))) {
// sequence for acceleration ReadMaterials
SeqPDS->Append(enti);
}
- if ( enti->IsKind ( STANDARD_TYPE(StepBasic_ProductDefinition ) ) ) {
- Handle(StepBasic_ProductDefinition) PD =
+ if (enti->IsKind(STANDARD_TYPE(StepBasic_ProductDefinition))) {
+ Handle(StepBasic_ProductDefinition) PD =
Handle(StepBasic_ProductDefinition)::DownCast(enti);
Standard_Integer index = TP->MapIndex(PD);
- if ( index >0 ) {
- Handle(Transfer_Binder) binder = TP->MapItem (index);
+ if (index > 0) {
+ Handle(Transfer_Binder) binder = TP->MapItem(index);
TopoDS_Shape S = TransferBRep::ShapeResult(binder);
- if ( ! S.IsNull() && ShapesMap.Contains(S) ) {
+ if (!S.IsNull() && ShapesMap.Contains(S)) {
NewShapesMap.Add(S);
- ShapePDMap.Bind ( S, PD );
+ ShapePDMap.Bind(S, PD);
Handle(STEPCAFControl_ExternFile) EF;
- PDFileMap.Bind ( PD, EF );
+ PDFileMap.Bind(PD, EF);
}
}
}
- if ( enti->IsKind ( STANDARD_TYPE(StepShape_ShapeRepresentation) ) ) {
+ if (enti->IsKind(STANDARD_TYPE(StepShape_ShapeRepresentation))) {
Standard_Integer index = TP->MapIndex(enti);
- if ( index >0 ) {
- Handle(Transfer_Binder) binder = TP->MapItem (index);
+ if (index > 0) {
+ Handle(Transfer_Binder) binder = TP->MapItem(index);
TopoDS_Shape S = TransferBRep::ShapeResult(binder);
- if ( ! S.IsNull() && ShapesMap.Contains(S) )
+ if (!S.IsNull() && ShapesMap.Contains(S))
NewShapesMap.Add(S);
}
}
}
// get directory name of the main file
- OSD_Path mainfile ( reader.WS()->LoadedFile() );
- mainfile.SetName ( "" );
- mainfile.SetExtension ( "" );
+ OSD_Path mainfile(reader.WS()->LoadedFile());
+ mainfile.SetName("");
+ mainfile.SetExtension("");
TCollection_AsciiString dpath;
- mainfile.SystemName ( dpath );
+ mainfile.SystemName(dpath);
// Load external references (only for relevant SDRs)
// and fill map SDR -> extern file
- STEPConstruct_ExternRefs ExtRefs ( reader.WS() );
+ STEPConstruct_ExternRefs ExtRefs(reader.WS());
ExtRefs.LoadExternRefs();
- for ( i=1; i <= ExtRefs.NbExternRefs(); i++ ) {
+ for (i = 1; i <= ExtRefs.NbExternRefs(); i++) {
// check extern ref format
Handle(TCollection_HAsciiString) format = ExtRefs.Format(i);
- if ( ! format.IsNull() ) {
- static Handle(TCollection_HAsciiString) ap203 = new TCollection_HAsciiString ( "STEP AP203" );
- static Handle(TCollection_HAsciiString) ap214 = new TCollection_HAsciiString ( "STEP AP214" );
- if ( ! format->IsSameString ( ap203, Standard_False ) &&
- ! format->IsSameString ( ap214, Standard_False ) ) {
+ if (!format.IsNull()) {
+ static Handle(TCollection_HAsciiString) ap203 = new TCollection_HAsciiString("STEP AP203");
+ static Handle(TCollection_HAsciiString) ap214 = new TCollection_HAsciiString("STEP AP214");
+ if (!format->IsSameString(ap203, Standard_False) &&
+ !format->IsSameString(ap214, Standard_False)) {
#ifdef OCCT_DEBUG
- cout << "Warning: STEPCAFControl_Reader::Transfer: Extern document is neither STEP AP203 nor AP214" << endl;
+ cout << "Warning: STEPCAFControl_Reader::Transfer: Extern document is neither STEP AP203 nor AP214" << endl;
#else
- continue;
+ continue;
#endif
}
}
#ifdef OCCT_DEBUG
else cout << "Warning: STEPCAFControl_Reader::Transfer: Extern document format not defined" << endl;
#endif
-
+
// get and check filename of the current extern ref
const Standard_CString filename = ExtRefs.FileName(i);
#ifdef OCCT_DEBUG
- cout<<"filename="<<filename<<endl;
+ cout << "filename=" << filename << endl;
#endif
- if ( ! filename || ! filename[0] ) {
+ if (!filename || !filename[0]) {
#ifdef OCCT_DEBUG
cout << "Warning: STEPCAFControl_Reader::Transfer: Extern reference file name is empty" << endl;
#endif
}
// compute true path to the extern file
- TCollection_AsciiString fullname = OSD_Path::AbsolutePath ( dpath, filename );
- if ( fullname.Length() <= 0 ) fullname = filename;
-
-/*
- char fullname[1024];
- char *mainfile = reader.WS()->LoadedFile();
- if ( ! mainfile ) mainfile = "";
- Standard_Integer slash = 0;
- for ( Standard_Integer k=0; mainfile[k]; k++ )
- if ( mainfile[k] == '/' ) slash = k;
- strncpy ( fullname, mainfile, slash );
- sprintf ( &fullname[slash], "%s%s", ( mainfile[0] ? "/" : "" ), filename );
-*/
-
+ TCollection_AsciiString fullname = OSD_Path::AbsolutePath(dpath, filename);
+ if (fullname.Length() <= 0) fullname = filename;
+
+ /*
+ char fullname[1024];
+ char *mainfile = reader.WS()->LoadedFile();
+ if ( ! mainfile ) mainfile = "";
+ Standard_Integer slash = 0;
+ for ( Standard_Integer k=0; mainfile[k]; k++ )
+ if ( mainfile[k] == '/' ) slash = k;
+ strncpy ( fullname, mainfile, slash );
+ sprintf ( &fullname[slash], "%s%s", ( mainfile[0] ? "/" : "" ), filename );
+ */
+
// get and check PD associated with the current extern ref
Handle(StepBasic_ProductDefinition) PD = ExtRefs.ProdDef(i);
- if ( PD.IsNull() ) continue; // not a valid extern ref
- if ( ! PDFileMap.IsBound ( PD ) ) continue; // this PD is not concerned by current transfer
-
+ if (PD.IsNull()) continue; // not a valid extern ref
+ if (!PDFileMap.IsBound(PD)) continue; // this PD is not concerned by current transfer
+
// read extern file (or use existing data) and record its data
- Handle(STEPCAFControl_ExternFile) EF =
- ReadExternFile ( filename, fullname.ToCString(), doc );
- PDFileMap.Bind ( PD, EF );
+ Handle(STEPCAFControl_ExternFile) EF =
+ ReadExternFile(filename, fullname.ToCString(), doc);
+ PDFileMap.Bind(PD, EF);
}
-
+
// and insert them to the document
- Handle(XCAFDoc_ShapeTool) STool = XCAFDoc_DocumentTool::ShapeTool( doc->Main() );
- if ( STool.IsNull() ) return Standard_False;
+ Handle(XCAFDoc_ShapeTool) STool = XCAFDoc_DocumentTool::ShapeTool(doc->Main());
+ if (STool.IsNull()) return Standard_False;
XCAFDoc_DataMapOfShapeLabel map;
- if ( asOne )
- Lseq.Append ( AddShape ( reader.OneShape(), STool, NewShapesMap, ShapePDMap, PDFileMap, map ) );
+ if (asOne)
+ Lseq.Append(AddShape(reader.OneShape(), STool, NewShapesMap, ShapePDMap, PDFileMap, map));
else {
- for ( i=1; i <= num; i++ ) {
- Lseq.Append ( AddShape ( reader.Shape(i), STool, NewShapesMap, ShapePDMap, PDFileMap, map ) );
+ for (i = 1; i <= num; i++) {
+ Lseq.Append(AddShape(reader.Shape(i), STool, NewShapesMap, ShapePDMap, PDFileMap, map));
}
}
-
+
// read colors
- if ( GetColorMode() )
- ReadColors ( reader.WS(), doc, map );
-
+ if (GetColorMode())
+ ReadColors(reader.WS(), doc, map);
+
// read names
- if ( GetNameMode() )
- ReadNames ( reader.WS(), doc, PDFileMap, map );
+ if (GetNameMode())
+ ReadNames(reader.WS(), doc, PDFileMap, map);
// read validation props
- if ( GetPropsMode() )
- ReadValProps ( reader.WS(), doc, PDFileMap, map );
+ if (GetPropsMode())
+ ReadValProps(reader.WS(), doc, PDFileMap, map);
// read layers
- if ( GetLayerMode() )
- ReadLayers ( reader.WS(), doc );
-
+ if (GetLayerMode())
+ ReadLayers(reader.WS(), doc);
+
// read SHUO entities from STEP model
- if ( GetSHUOMode() )
- ReadSHUOs ( reader.WS(), doc, PDFileMap, map );
+ if (GetSHUOMode())
+ ReadSHUOs(reader.WS(), doc, PDFileMap, map);
// read GDT entities from STEP model
- if(GetGDTMode())
- ReadGDTs(reader.WS(),doc);
+ if (GetGDTMode())
+ ReadGDTs(reader.WS(), doc);
// read Material entities from STEP model
- if(GetMatMode())
- ReadMaterials(reader.WS(),doc,SeqPDS);
+ if (GetMatMode())
+ ReadMaterials(reader.WS(), doc, SeqPDS);
// read View entities from STEP model
if (GetViewMode())
//purpose :
//=======================================================================
-TDF_Label STEPCAFControl_Reader::AddShape (const TopoDS_Shape &S,
- const Handle(XCAFDoc_ShapeTool) &STool,
- const TopTools_MapOfShape &NewShapesMap,
- const STEPCAFControl_DataMapOfShapePD &ShapePDMap,
- const STEPCAFControl_DataMapOfPDExternFile &PDFileMap,
- XCAFDoc_DataMapOfShapeLabel &ShapeLabelMap) const
+TDF_Label STEPCAFControl_Reader::AddShape(const TopoDS_Shape &S,
+ const Handle(XCAFDoc_ShapeTool) &STool,
+ const TopTools_MapOfShape &NewShapesMap,
+ const STEPCAFControl_DataMapOfShapePD &ShapePDMap,
+ const STEPCAFControl_DataMapOfPDExternFile &PDFileMap,
+ XCAFDoc_DataMapOfShapeLabel &ShapeLabelMap) const
{
// if shape has already been mapped, just return corresponding label
- if ( ShapeLabelMap.IsBound ( S ) ) {
- return ShapeLabelMap.Find ( S );
+ if (ShapeLabelMap.IsBound(S)) {
+ return ShapeLabelMap.Find(S);
}
-
+
// if shape is located, create instance
- if ( ! S.Location().IsIdentity() ) {
+ if (!S.Location().IsIdentity()) {
TopoDS_Shape S0 = S;
TopLoc_Location loc;
- S0.Location ( loc );
- AddShape ( S0, STool, NewShapesMap, ShapePDMap, PDFileMap, ShapeLabelMap );
- TDF_Label L = STool->AddShape ( S, Standard_False ); // should create reference
- ShapeLabelMap.Bind ( S, L );
+ S0.Location(loc);
+ AddShape(S0, STool, NewShapesMap, ShapePDMap, PDFileMap, ShapeLabelMap);
+ TDF_Label L = STool->AddShape(S, Standard_False); // should create reference
+ ShapeLabelMap.Bind(S, L);
return L;
}
-
+
// if shape is not compound, simple add it
- if ( S.ShapeType() != TopAbs_COMPOUND ) {
- TDF_Label L = STool->AddShape ( S, Standard_False );
- ShapeLabelMap.Bind ( S, L );
+ if (S.ShapeType() != TopAbs_COMPOUND) {
+ TDF_Label L = STool->AddShape(S, Standard_False);
+ ShapeLabelMap.Bind(S, L);
return L;
}
-
+
// for compounds, compute number of subshapes and check whether this is assembly
Standard_Boolean isAssembly = Standard_False;
Standard_Integer nbComponents = 0;
TopoDS_Iterator it;
- for ( it.Initialize(S); it.More() && !isAssembly; it.Next(), nbComponents++ ) {
+ for (it.Initialize(S); it.More() && !isAssembly; it.Next(), nbComponents++) {
TopoDS_Shape Sub0 = it.Value();
TopLoc_Location loc;
- Sub0.Location ( loc );
- if ( NewShapesMap.Contains ( Sub0 ) ) isAssembly = Standard_True;
+ Sub0.Location(loc);
+ if (NewShapesMap.Contains(Sub0)) isAssembly = Standard_True;
}
-// if(nbComponents>0) isAssembly = Standard_True;
-
- // check whether it has associated external ref
+ // if(nbComponents>0) isAssembly = Standard_True;
+
+ // check whether it has associated external ref
TColStd_SequenceOfHAsciiString SHAS;
- if ( ShapePDMap.IsBound ( S ) && PDFileMap.IsBound ( ShapePDMap.Find(S) ) ) {
- Handle(STEPCAFControl_ExternFile) EF = PDFileMap.Find ( ShapePDMap.Find(S) );
- if ( ! EF.IsNull() ) {
+ if (ShapePDMap.IsBound(S) && PDFileMap.IsBound(ShapePDMap.Find(S))) {
+ Handle(STEPCAFControl_ExternFile) EF = PDFileMap.Find(ShapePDMap.Find(S));
+ if (!EF.IsNull()) {
// (store information on extern refs in the document)
SHAS.Append(EF->GetName());
// if yes, just return corresponding label
- if ( ! EF->GetLabel().IsNull() ) {
- // but if components >0, ignore extern ref!
- if ( nbComponents <=0 ) {
- ShapeLabelMap.Bind ( S, EF->GetLabel() );
- STool->SetExternRefs(EF->GetLabel(),SHAS);
- return EF->GetLabel();
- }
+ if (!EF->GetLabel().IsNull()) {
+ // but if components >0, ignore extern ref!
+ if (nbComponents <= 0) {
+ ShapeLabelMap.Bind(S, EF->GetLabel());
+ STool->SetExternRefs(EF->GetLabel(), SHAS);
+ return EF->GetLabel();
+ }
}
#ifdef OCCT_DEBUG
- if ( ! EF->GetLabel().IsNull() )
+ if (!EF->GetLabel().IsNull())
cout << "Warning: STEPCAFControl_Reader::AddShape: Non-empty shape with external ref; ref is ignored" << endl;
- else if ( nbComponents <=0 )
- cout << "Warning: STEPCAFControl_Reader::AddShape: Result of reading extern ref is Null" << endl;
+ else if (nbComponents <= 0)
+ cout << "Warning: STEPCAFControl_Reader::AddShape: Result of reading extern ref is Null" << endl;
#endif
}
}
-
+
// add compound either as a whole,
- if ( ! isAssembly ) {
- TDF_Label L = STool->AddShape ( S, Standard_False );
- if ( SHAS.Length() >0 ) STool->SetExternRefs(L,SHAS);
- ShapeLabelMap.Bind ( S, L );
+ if (!isAssembly) {
+ TDF_Label L = STool->AddShape(S, Standard_False);
+ if (SHAS.Length() > 0) STool->SetExternRefs(L, SHAS);
+ ShapeLabelMap.Bind(S, L);
return L;
}
-
+
// or as assembly, component-by-component
TDF_Label L = STool->NewShape();
nbComponents = 0;
- for ( it.Initialize(S); it.More(); it.Next(), nbComponents++ ) {
+ for (it.Initialize(S); it.More(); it.Next(), nbComponents++) {
TopoDS_Shape Sub0 = it.Value();
TopLoc_Location loc;
- Sub0.Location ( loc );
- TDF_Label subL = AddShape ( Sub0, STool, NewShapesMap, ShapePDMap, PDFileMap, ShapeLabelMap );
- if ( ! subL.IsNull() ) {
- TDF_Label instL = STool->AddComponent ( L, subL, it.Value().Location() );
+ Sub0.Location(loc);
+ TDF_Label subL = AddShape(Sub0, STool, NewShapesMap, ShapePDMap, PDFileMap, ShapeLabelMap);
+ if (!subL.IsNull()) {
+ TDF_Label instL = STool->AddComponent(L, subL, it.Value().Location());
ShapeLabelMap.Bind(it.Value(), instL);
}
}
- if ( SHAS.Length() >0 ) STool->SetExternRefs(L,SHAS);
- ShapeLabelMap.Bind ( S, L );
+ if (SHAS.Length() > 0) STool->SetExternRefs(L, SHAS);
+ ShapeLabelMap.Bind(S, L);
//STool->SetShape ( L, S ); // it is necessary for assemblies OCC1747 // commemted by skl for OCC2941
return L;
//purpose :
//=======================================================================
-Handle(STEPCAFControl_ExternFile) STEPCAFControl_Reader::ReadExternFile (const Standard_CString file,
- const Standard_CString fullname,
- Handle(TDocStd_Document)& doc)
+Handle(STEPCAFControl_ExternFile) STEPCAFControl_Reader::ReadExternFile(const Standard_CString file,
+ const Standard_CString fullname,
+ Handle(TDocStd_Document)& doc)
{
// if the file is already read, associate it with SDR
- if ( myFiles.IsBound ( file ) ) {
- return myFiles.ChangeFind ( file );
+ if (myFiles.IsBound(file)) {
+ return myFiles.ChangeFind(file);
}
#ifdef OCCT_DEBUG
cout << "Reading extern file: " << fullname << endl;
#endif
-
+
// create new WorkSession and Reader
Handle(XSControl_WorkSession) newWS = new XSControl_WorkSession;
- newWS->SelectNorm ( "STEP" );
- STEPControl_Reader sr ( newWS, Standard_False );
-
+ newWS->SelectNorm("STEP");
+ STEPControl_Reader sr(newWS, Standard_False);
+
// start to fill the resulting ExternFile structure
Handle(STEPCAFControl_ExternFile) EF = new STEPCAFControl_ExternFile;
- EF->SetWS ( newWS );
- EF->SetName ( new TCollection_HAsciiString ( file ) );
-
+ EF->SetWS(newWS);
+ EF->SetName(new TCollection_HAsciiString(file));
+
// read file
- EF->SetLoadStatus ( sr.ReadFile ( fullname ) );
-
+ EF->SetLoadStatus(sr.ReadFile(fullname));
+
// transfer in single-result mode
- if ( EF->GetLoadStatus() == IFSelect_RetDone ) {
+ if (EF->GetLoadStatus() == IFSelect_RetDone) {
TDF_LabelSequence labels;
- EF->SetTransferStatus ( Transfer ( sr, 0, doc, labels, Standard_True ) );
- if ( labels.Length() >0 ) EF->SetLabel ( labels.Value(1) );
+ EF->SetTransferStatus(Transfer(sr, 0, doc, labels, Standard_True));
+ if (labels.Length() > 0) EF->SetLabel(labels.Value(1));
}
-
+
// add read file to dictionary
- myFiles.Bind( file, EF );
-
+ myFiles.Bind(file, EF);
+
return EF;
}
//function : findStyledSR
//purpose : auxilary
//=======================================================================
-static void findStyledSR (const Handle(StepVisual_StyledItem) &style,
- Handle(StepShape_ShapeRepresentation)& aSR)
+static void findStyledSR(const Handle(StepVisual_StyledItem) &style,
+ Handle(StepShape_ShapeRepresentation)& aSR)
{
// search Shape Represenatation for component styled item
- for ( Standard_Integer j=1; j <= style->NbStyles(); j++ ) {
- Handle(StepVisual_PresentationStyleByContext) PSA =
- Handle(StepVisual_PresentationStyleByContext)::DownCast(style->StylesValue ( j ));
- if ( PSA.IsNull() )
+ for (Standard_Integer j = 1; j <= style->NbStyles(); j++) {
+ Handle(StepVisual_PresentationStyleByContext) PSA =
+ Handle(StepVisual_PresentationStyleByContext)::DownCast(style->StylesValue(j));
+ if (PSA.IsNull())
continue;
StepVisual_StyleContextSelect aStyleCntxSlct = PSA->StyleContext();
- Handle(StepShape_ShapeRepresentation) aCurrentSR =
+ Handle(StepShape_ShapeRepresentation) aCurrentSR =
Handle(StepShape_ShapeRepresentation)::DownCast(aStyleCntxSlct.Representation());
- if ( aCurrentSR.IsNull() )
+ if (aCurrentSR.IsNull())
continue;
aSR = aCurrentSR;
- break;
+ break;
}
}
//purpose :
//=======================================================================
-Standard_Boolean STEPCAFControl_Reader::ReadColors (const Handle(XSControl_WorkSession) &WS,
- Handle(TDocStd_Document)& Doc,
- const XCAFDoc_DataMapOfShapeLabel &ShapeLabelMap) const
+Standard_Boolean STEPCAFControl_Reader::ReadColors(const Handle(XSControl_WorkSession) &WS,
+ Handle(TDocStd_Document)& Doc,
+ const XCAFDoc_DataMapOfShapeLabel &ShapeLabelMap) const
{
- STEPConstruct_Styles Styles ( WS );
- if ( ! Styles.LoadStyles() ) {
+ STEPConstruct_Styles Styles(WS);
+ if (!Styles.LoadStyles()) {
#ifdef OCCT_DEBUG
cout << "Warning: no styles are found in the model" << endl;
#endif
}
// searching for invisible items in the model
Handle(TColStd_HSequenceOfTransient) aHSeqOfInvisStyle = new TColStd_HSequenceOfTransient;
- Styles.LoadInvisStyles( aHSeqOfInvisStyle );
-
- Handle(XCAFDoc_ColorTool) CTool = XCAFDoc_DocumentTool::ColorTool( Doc->Main() );
- if ( CTool.IsNull() ) return Standard_False;
+ Styles.LoadInvisStyles(aHSeqOfInvisStyle);
+
+ Handle(XCAFDoc_ColorTool) CTool = XCAFDoc_DocumentTool::ColorTool(Doc->Main());
+ if (CTool.IsNull()) return Standard_False;
Handle(XCAFDoc_ShapeTool) STool = XCAFDoc_DocumentTool::ShapeTool(Doc->Main());
if (STool.IsNull()) return Standard_False;
// parse and search for color attributes
Standard_Integer nb = Styles.NbStyles();
- for ( Standard_Integer i=1; i <= nb; i++ ) {
- Handle(StepVisual_StyledItem) style = Styles.Style ( i );
- if ( style.IsNull() ) continue;
-
+ for (Standard_Integer i = 1; i <= nb; i++) {
+ Handle(StepVisual_StyledItem) style = Styles.Style(i);
+ if (style.IsNull()) continue;
+
Standard_Boolean IsVisible = Standard_True;
// check the visibility of styled item.
- for (Standard_Integer si = 1; si <= aHSeqOfInvisStyle->Length(); si++ ) {
- if ( style != aHSeqOfInvisStyle->Value( si ) )
+ for (Standard_Integer si = 1; si <= aHSeqOfInvisStyle->Length(); si++) {
+ if (style != aHSeqOfInvisStyle->Value(si))
continue;
// found that current style is invisible.
IsVisible = Standard_False;
Handle(StepVisual_Colour) SurfCol, BoundCol, CurveCol;
// check if it is component style
Standard_Boolean IsComponent = Standard_False;
- if ( ! Styles.GetColors ( style, SurfCol, BoundCol, CurveCol, IsComponent ) && IsVisible )
+ if (!Styles.GetColors(style, SurfCol, BoundCol, CurveCol, IsComponent) && IsVisible)
continue;
-
+
// find shape
NCollection_Vector<Handle(Standard_Transient)> anItems;
if (!style->Item().IsNull()) {
anItems.Append(style->Item());
}
- else if (!style->ItemAP242().Representation().IsNull()){
+ else if (!style->ItemAP242().Representation().IsNull()) {
//special case for AP242: item can be Reprsentation
Handle(StepRepr_Representation) aRepr = style->ItemAP242().Representation();
for (Standard_Integer j = 1; j <= aRepr->Items()->Length(); j++)
anItems.Append(aRepr->Items()->Value(j));
}
for (Standard_Integer itemIt = 0; itemIt < anItems.Length(); itemIt++) {
- TopoDS_Shape S = STEPConstruct::FindShape ( Styles.TransientProcess(),
- Handle(StepRepr_RepresentationItem)::DownCast(anItems.Value(itemIt)) );
+ TopoDS_Shape S = STEPConstruct::FindShape(Styles.TransientProcess(),
+ Handle(StepRepr_RepresentationItem)::DownCast(anItems.Value(itemIt)));
Standard_Boolean isSkipSHUOstyle = Standard_False;
// take shape with real location.
- while ( IsComponent ) {
+ while (IsComponent) {
// take SR of NAUO
Handle(StepShape_ShapeRepresentation) aSR;
- findStyledSR( style, aSR );
+ findStyledSR(style, aSR);
// search for SR along model
if (aSR.IsNull())
break;
- Interface_EntityIterator subs = WS->HGraph()->Graph().Sharings( aSR );
+ Interface_EntityIterator subs = WS->HGraph()->Graph().Sharings(aSR);
Handle(StepShape_ShapeDefinitionRepresentation) aSDR;
for (subs.Start(); subs.More(); subs.Next()) {
aSDR = Handle(StepShape_ShapeDefinitionRepresentation)::DownCast(subs.Value());
- if ( aSDR.IsNull() )
+ if (aSDR.IsNull())
continue;
StepRepr_RepresentedDefinition aPDSselect = aSDR->Definition();
- Handle(StepRepr_ProductDefinitionShape) PDS =
+ Handle(StepRepr_ProductDefinitionShape) PDS =
Handle(StepRepr_ProductDefinitionShape)::DownCast(aPDSselect.PropertyDefinition());
- if ( PDS.IsNull() )
+ if (PDS.IsNull())
continue;
StepRepr_CharacterizedDefinition aCharDef = PDS->Definition();
-
- Handle(StepRepr_AssemblyComponentUsage) ACU =
+
+ Handle(StepRepr_AssemblyComponentUsage) ACU =
Handle(StepRepr_AssemblyComponentUsage)::DownCast(aCharDef.ProductDefinitionRelationship());
if (ACU.IsNull())
continue;
}
Handle(StepRepr_NextAssemblyUsageOccurrence) NAUO =
Handle(StepRepr_NextAssemblyUsageOccurrence)::DownCast(ACU);
- if ( NAUO.IsNull() )
+ if (NAUO.IsNull())
continue;
-
+
TopoDS_Shape aSh;
// PTV 10.02.2003 to find component of assembly CORRECTLY
- STEPConstruct_Tool Tool( WS );
- TDF_Label aShLab = FindInstance ( NAUO, CTool->ShapeTool(), Tool, ShapeLabelMap );
+ STEPConstruct_Tool Tool(WS);
+ TDF_Label aShLab = FindInstance(NAUO, CTool->ShapeTool(), Tool, ShapeLabelMap);
aSh = CTool->ShapeTool()->GetShape(aShLab);
if (!aSh.IsNull()) {
S = aSh;
}
if (isSkipSHUOstyle)
continue; // skip styled item which refer to SHUO
-
- if ( S.IsNull() )
+
+ if (S.IsNull())
continue;
-
+
if (!SurfCol.IsNull() || !BoundCol.IsNull() || !CurveCol.IsNull() || !IsVisible)
{
TDF_Label aL;
//purpose :
//=======================================================================
-static TDF_Label GetLabelFromPD (const Handle(StepBasic_ProductDefinition) &PD,
- const Handle(XCAFDoc_ShapeTool) &STool,
- const Handle(Transfer_TransientProcess) &TP,
- const STEPCAFControl_DataMapOfPDExternFile &PDFileMap,
- const XCAFDoc_DataMapOfShapeLabel &ShapeLabelMap)
+static TDF_Label GetLabelFromPD(const Handle(StepBasic_ProductDefinition) &PD,
+ const Handle(XCAFDoc_ShapeTool) &STool,
+ const Handle(Transfer_TransientProcess) &TP,
+ const STEPCAFControl_DataMapOfPDExternFile &PDFileMap,
+ const XCAFDoc_DataMapOfShapeLabel &ShapeLabelMap)
{
TDF_Label L;
- if ( PDFileMap.IsBound ( PD ) ) {
- Handle(STEPCAFControl_ExternFile) EF = PDFileMap.Find ( PD );
- if ( ! EF.IsNull() ) {
+ if (PDFileMap.IsBound(PD)) {
+ Handle(STEPCAFControl_ExternFile) EF = PDFileMap.Find(PD);
+ if (!EF.IsNull()) {
L = EF->GetLabel();
- if ( ! L.IsNull() ) return L;
+ if (!L.IsNull()) return L;
}
}
TopoDS_Shape S;
Handle(Transfer_Binder) binder = TP->Find(PD);
- if ( binder.IsNull() || ! binder->HasResult() ) return L;
- S = TransferBRep::ShapeResult ( TP, binder );
- if ( S.IsNull() ) return L;
-
- if ( ShapeLabelMap.IsBound ( S ) )
- L = ShapeLabelMap.Find ( S );
- if ( L.IsNull() )
- STool->Search ( S, L, Standard_True, Standard_True, Standard_False );
+ if (binder.IsNull() || !binder->HasResult()) return L;
+ S = TransferBRep::ShapeResult(TP, binder);
+ if (S.IsNull()) return L;
+
+ if (ShapeLabelMap.IsBound(S))
+ L = ShapeLabelMap.Find(S);
+ if (L.IsNull())
+ STool->Search(S, L, Standard_True, Standard_True, Standard_False);
return L;
}
//purpose :
//=======================================================================
-TDF_Label STEPCAFControl_Reader::FindInstance (const Handle(StepRepr_NextAssemblyUsageOccurrence) &NAUO,
- const Handle(XCAFDoc_ShapeTool) &STool,
- const STEPConstruct_Tool &Tool,
- const XCAFDoc_DataMapOfShapeLabel &ShapeLabelMap)
+TDF_Label STEPCAFControl_Reader::FindInstance(const Handle(StepRepr_NextAssemblyUsageOccurrence) &NAUO,
+ const Handle(XCAFDoc_ShapeTool) &STool,
+ const STEPConstruct_Tool &Tool,
+ const XCAFDoc_DataMapOfShapeLabel &ShapeLabelMap)
{
TDF_Label L;
-
+
// get shape resulting from CDSR (in fact, only location is interesting)
Handle(Transfer_TransientProcess) TP = Tool.TransientProcess();
Handle(Transfer_Binder) binder = TP->Find(NAUO);
- if ( binder.IsNull() || ! binder->HasResult() ) {
+ if (binder.IsNull() || !binder->HasResult()) {
#ifdef OCCT_DEBUG
cout << "Error: STEPCAFControl_Reader::FindInstance: NAUO is not mapped to shape" << endl;
#endif
return L;
}
-
- TopoDS_Shape S = TransferBRep::ShapeResult ( TP, binder );
- if ( S.IsNull() ) {
+
+ TopoDS_Shape S = TransferBRep::ShapeResult(TP, binder);
+ if (S.IsNull()) {
#ifdef OCCT_DEBUG
cout << "Error: STEPCAFControl_Reader::FindInstance: NAUO is not mapped to shape" << endl;
#endif
//purpose :
//=======================================================================
-Standard_Boolean STEPCAFControl_Reader::ReadNames (const Handle(XSControl_WorkSession) &WS,
- Handle(TDocStd_Document)& Doc,
- const STEPCAFControl_DataMapOfPDExternFile &PDFileMap,
- const XCAFDoc_DataMapOfShapeLabel &ShapeLabelMap) const
+Standard_Boolean STEPCAFControl_Reader::ReadNames(const Handle(XSControl_WorkSession) &WS,
+ Handle(TDocStd_Document)& Doc,
+ const STEPCAFControl_DataMapOfPDExternFile &PDFileMap,
+ const XCAFDoc_DataMapOfShapeLabel &ShapeLabelMap) const
{
// get starting data
const Handle(Interface_InterfaceModel) &Model = WS->Model();
const Handle(XSControl_TransferReader) &TR = WS->TransferReader();
const Handle(Transfer_TransientProcess) &TP = TR->TransientProcess();
- Handle(XCAFDoc_ShapeTool) STool = XCAFDoc_DocumentTool::ShapeTool( Doc->Main() );
- if ( STool.IsNull() ) return Standard_False;
- STEPConstruct_Tool Tool ( WS );
+ Handle(XCAFDoc_ShapeTool) STool = XCAFDoc_DocumentTool::ShapeTool(Doc->Main());
+ if (STool.IsNull()) return Standard_False;
+ STEPConstruct_Tool Tool(WS);
// iterate on model to find all SDRs and CDSRs
Standard_Integer nb = Model->NbEntities();
Handle(Standard_Type) tNAUO = STANDARD_TYPE(StepRepr_NextAssemblyUsageOccurrence);
- Handle(Standard_Type) tPD = STANDARD_TYPE(StepBasic_ProductDefinition);
+ Handle(Standard_Type) tPD = STANDARD_TYPE(StepBasic_ProductDefinition);
Handle(TCollection_HAsciiString) name;
TDF_Label L;
for (Standard_Integer i = 1; i <= nb; i++) {
Handle(Standard_Transient) enti = Model->Value(i);
// get description of NAUO
- if ( enti->DynamicType() == tNAUO ) {
+ if (enti->DynamicType() == tNAUO) {
L.Nullify();
- Handle(StepRepr_NextAssemblyUsageOccurrence) NAUO =
+ Handle(StepRepr_NextAssemblyUsageOccurrence) NAUO =
Handle(StepRepr_NextAssemblyUsageOccurrence)::DownCast(enti);
- if(NAUO.IsNull()) continue;
+ if (NAUO.IsNull()) continue;
Interface_EntityIterator subs = WS->Graph().Sharings(NAUO);
for (subs.Start(); subs.More(); subs.Next()) {
- Handle(StepRepr_ProductDefinitionShape) PDS =
+ Handle(StepRepr_ProductDefinitionShape) PDS =
Handle(StepRepr_ProductDefinitionShape)::DownCast(subs.Value());
- if(PDS.IsNull()) continue;
+ if (PDS.IsNull()) continue;
Handle(StepBasic_ProductDefinitionRelationship) PDR = PDS->Definition().ProductDefinitionRelationship();
- if ( PDR.IsNull() ) continue;
- if ( PDR->HasDescription() &&
- PDR->Description()->UsefullLength() >0 ) name = PDR->Description();
- else if ( !PDR->Name().IsNull() && PDR->Name()->UsefullLength() >0 ) name = PDR->Name();
- else if ( !PDR->Id().IsNull()) name = PDR->Id();
+ if (PDR.IsNull()) continue;
+ if (PDR->HasDescription() &&
+ PDR->Description()->UsefullLength() > 0) name = PDR->Description();
+ else if (!PDR->Name().IsNull() && PDR->Name()->UsefullLength() > 0) name = PDR->Name();
+ else if (!PDR->Id().IsNull()) name = PDR->Id();
else name = new TCollection_HAsciiString;
}
// find proper label
- L = FindInstance ( NAUO, STool, Tool, ShapeLabelMap );
- if ( L.IsNull() ) continue;
- TCollection_ExtendedString str ( name->String() );
- TDataStd_Name::Set ( L, str );
+ L = FindInstance(NAUO, STool, Tool, ShapeLabelMap);
+ if (L.IsNull()) continue;
+ TCollection_ExtendedString str(name->String());
+ TDataStd_Name::Set(L, str);
}
// for PD get name of associated product
- if ( enti->DynamicType() == tPD ) {
+ if (enti->DynamicType() == tPD) {
L.Nullify();
- Handle(StepBasic_ProductDefinition) PD =
+ Handle(StepBasic_ProductDefinition) PD =
Handle(StepBasic_ProductDefinition)::DownCast(enti);
- if(PD.IsNull()) continue;
+ if (PD.IsNull()) continue;
Handle(StepBasic_Product) Prod = (!PD->Formation().IsNull() ? PD->Formation()->OfProduct() : NULL);
if (Prod.IsNull())
name = new TCollection_HAsciiString;
- else if (!Prod->Name().IsNull() && Prod->Name()->UsefullLength() > 0)
+ else if (!Prod->Name().IsNull() && Prod->Name()->UsefullLength() > 0)
name = Prod->Name();
- else if (!Prod->Id().IsNull())
+ else if (!Prod->Id().IsNull())
name = Prod->Id();
- else
+ else
name = new TCollection_HAsciiString;
- L = GetLabelFromPD ( PD, STool, TP, PDFileMap, ShapeLabelMap );
- if ( L.IsNull() ) continue;
- TCollection_ExtendedString str ( name->String() );
- TDataStd_Name::Set ( L, str );
+ L = GetLabelFromPD(PD, STool, TP, PDFileMap, ShapeLabelMap);
+ if (L.IsNull()) continue;
+ TCollection_ExtendedString str(name->String());
+ TDataStd_Name::Set(L, str);
}
// set a name to the document
//TCollection_ExtendedString str ( name->String() );
//purpose :
//=======================================================================
-static TDF_Label GetLabelFromPD (const Handle(StepBasic_ProductDefinition) &PD,
- const Handle(XCAFDoc_ShapeTool) &STool,
- const STEPConstruct_ValidationProps &Props,
- const STEPCAFControl_DataMapOfPDExternFile &PDFileMap,
- const XCAFDoc_DataMapOfShapeLabel &ShapeLabelMap)
+static TDF_Label GetLabelFromPD(const Handle(StepBasic_ProductDefinition) &PD,
+ const Handle(XCAFDoc_ShapeTool) &STool,
+ const STEPConstruct_ValidationProps &Props,
+ const STEPCAFControl_DataMapOfPDExternFile &PDFileMap,
+ const XCAFDoc_DataMapOfShapeLabel &ShapeLabelMap)
{
TDF_Label L;
- if ( PDFileMap.IsBound ( PD ) ) {
- Handle(STEPCAFControl_ExternFile) EF = PDFileMap.Find ( PD );
- if ( ! EF.IsNull() ) {
+ if (PDFileMap.IsBound(PD)) {
+ Handle(STEPCAFControl_ExternFile) EF = PDFileMap.Find(PD);
+ if (!EF.IsNull()) {
L = EF->GetLabel();
- if ( ! L.IsNull() ) return L;
+ if (!L.IsNull()) return L;
}
}
- TopoDS_Shape S = Props.GetPropShape ( PD );
- if ( S.IsNull() ) return L;
- if ( ShapeLabelMap.IsBound ( S ) )
- L = ShapeLabelMap.Find ( S );
- if ( L.IsNull() )
- STool->Search ( S, L, Standard_True, Standard_True, Standard_False );
+ TopoDS_Shape S = Props.GetPropShape(PD);
+ if (S.IsNull()) return L;
+ if (ShapeLabelMap.IsBound(S))
+ L = ShapeLabelMap.Find(S);
+ if (L.IsNull())
+ STool->Search(S, L, Standard_True, Standard_True, Standard_False);
return L;
}
//purpose :
//=======================================================================
-Standard_Boolean STEPCAFControl_Reader::ReadValProps (const Handle(XSControl_WorkSession) &WS,
- Handle(TDocStd_Document)& Doc,
- const STEPCAFControl_DataMapOfPDExternFile &PDFileMap,
- const XCAFDoc_DataMapOfShapeLabel &ShapeLabelMap) const
+Standard_Boolean STEPCAFControl_Reader::ReadValProps(const Handle(XSControl_WorkSession) &WS,
+ Handle(TDocStd_Document)& Doc,
+ const STEPCAFControl_DataMapOfPDExternFile &PDFileMap,
+ const XCAFDoc_DataMapOfShapeLabel &ShapeLabelMap) const
{
// get starting data
const Handle(XSControl_TransferReader) &TR = WS->TransferReader();
const Handle(Transfer_TransientProcess) &TP = TR->TransientProcess();
- Handle(XCAFDoc_ShapeTool) STool = XCAFDoc_DocumentTool::ShapeTool( Doc->Main() );
- if ( STool.IsNull() ) return Standard_False;
+ Handle(XCAFDoc_ShapeTool) STool = XCAFDoc_DocumentTool::ShapeTool(Doc->Main());
+ if (STool.IsNull()) return Standard_False;
// load props from the STEP model
TColStd_SequenceOfTransient props;
- STEPConstruct_ValidationProps Props ( WS );
- if ( ! Props.LoadProps ( props ) ) {
+ STEPConstruct_ValidationProps Props(WS);
+ if (!Props.LoadProps(props)) {
#ifdef OCCT_DEBUG
cout << "Warning: no validation props found in the model" << endl;
#endif
}
// interpret props one by one
- for (Standard_Integer i = 1; i <= props.Length(); i ++) {
- Handle(StepRepr_PropertyDefinitionRepresentation) PDR =
- Handle(StepRepr_PropertyDefinitionRepresentation)::DownCast ( props.Value(i) );
- if ( PDR.IsNull() ) continue;
+ for (Standard_Integer i = 1; i <= props.Length(); i++) {
+ Handle(StepRepr_PropertyDefinitionRepresentation) PDR =
+ Handle(StepRepr_PropertyDefinitionRepresentation)::DownCast(props.Value(i));
+ if (PDR.IsNull()) continue;
TDF_Label L;
Handle(StepRepr_PropertyDefinition) PD = PDR->Definition().PropertyDefinition();
Interface_EntityIterator subs = Props.Graph().Shareds(PD);
for (subs.Start(); L.IsNull() && subs.More(); subs.Next()) {
- if ( subs.Value()->IsKind(STANDARD_TYPE(StepRepr_ProductDefinitionShape)) ) {
+ if (subs.Value()->IsKind(STANDARD_TYPE(StepRepr_ProductDefinitionShape))) {
Handle(StepRepr_ProductDefinitionShape) PDS = Handle(StepRepr_ProductDefinitionShape)::DownCast(subs.Value());
- if(PDS.IsNull()) continue;
+ if (PDS.IsNull()) continue;
// find corresponding NAUO
Handle(StepRepr_NextAssemblyUsageOccurrence) NAUO;
Interface_EntityIterator subs1 = Props.Graph().Shareds(PDS);
for (subs1.Start(); NAUO.IsNull() && subs1.More(); subs1.Next()) {
- if ( subs1.Value()->IsKind(STANDARD_TYPE(StepRepr_NextAssemblyUsageOccurrence)) )
+ if (subs1.Value()->IsKind(STANDARD_TYPE(StepRepr_NextAssemblyUsageOccurrence)))
NAUO = Handle(StepRepr_NextAssemblyUsageOccurrence)::DownCast(subs1.Value());
}
- if ( !NAUO.IsNull() ) {
- L = FindInstance ( NAUO, STool, WS, ShapeLabelMap );
- if ( L.IsNull() ) continue;
+ if (!NAUO.IsNull()) {
+ L = FindInstance(NAUO, STool, WS, ShapeLabelMap);
+ if (L.IsNull()) continue;
}
else {
// find corresponding ProductDefinition:
Handle(StepBasic_ProductDefinition) ProdDef;
Interface_EntityIterator subsPDS = Props.Graph().Shareds(PDS);
for (subsPDS.Start(); ProdDef.IsNull() && subsPDS.More(); subsPDS.Next()) {
- if ( subsPDS.Value()->IsKind(STANDARD_TYPE(StepBasic_ProductDefinition)) )
+ if (subsPDS.Value()->IsKind(STANDARD_TYPE(StepBasic_ProductDefinition)))
ProdDef = Handle(StepBasic_ProductDefinition)::DownCast(subsPDS.Value());
}
- if ( ProdDef.IsNull() ) continue;
- L = GetLabelFromPD ( ProdDef, STool, Props, PDFileMap, ShapeLabelMap );
+ if (ProdDef.IsNull()) continue;
+ L = GetLabelFromPD(ProdDef, STool, Props, PDFileMap, ShapeLabelMap);
}
}
- if ( subs.Value()->IsKind(STANDARD_TYPE(StepRepr_ShapeAspect)) ) {
+ if (subs.Value()->IsKind(STANDARD_TYPE(StepRepr_ShapeAspect))) {
Handle(StepRepr_ShapeAspect) SA = Handle(StepRepr_ShapeAspect)::DownCast(subs.Value());
- if(SA.IsNull()) continue;
+ if (SA.IsNull()) continue;
// find ShapeRepresentation
Handle(StepShape_ShapeRepresentation) SR;
Interface_EntityIterator subs1 = Props.Graph().Sharings(SA);
- for(subs1.Start(); subs1.More() && SR.IsNull(); subs1.Next()) {
- Handle(StepRepr_PropertyDefinition) PropD1 =
+ for (subs1.Start(); subs1.More() && SR.IsNull(); subs1.Next()) {
+ Handle(StepRepr_PropertyDefinition) PropD1 =
Handle(StepRepr_PropertyDefinition)::DownCast(subs1.Value());
- if(PropD1.IsNull()) continue;
+ if (PropD1.IsNull()) continue;
Interface_EntityIterator subs2 = Props.Graph().Sharings(PropD1);
- for(subs2.Start(); subs2.More() && SR.IsNull(); subs2.Next()) {
+ for (subs2.Start(); subs2.More() && SR.IsNull(); subs2.Next()) {
Handle(StepShape_ShapeDefinitionRepresentation) SDR =
Handle(StepShape_ShapeDefinitionRepresentation)::DownCast(subs2.Value());
- if(SDR.IsNull()) continue;
+ if (SDR.IsNull()) continue;
SR = Handle(StepShape_ShapeRepresentation)::DownCast(SDR->UsedRepresentation());
}
}
- if(SR.IsNull()) continue;
+ if (SR.IsNull()) continue;
Handle(Transfer_Binder) binder;
- for(Standard_Integer ir=1; ir<=SR->NbItems() && binder.IsNull(); ir++) {
- if(SR->ItemsValue(ir)->IsKind(STANDARD_TYPE(StepShape_SolidModel))) {
- Handle(StepShape_SolidModel) SM =
+ for (Standard_Integer ir = 1; ir <= SR->NbItems() && binder.IsNull(); ir++) {
+ if (SR->ItemsValue(ir)->IsKind(STANDARD_TYPE(StepShape_SolidModel))) {
+ Handle(StepShape_SolidModel) SM =
Handle(StepShape_SolidModel)::DownCast(SR->ItemsValue(ir));
binder = TP->Find(SM);
}
- else if(SR->ItemsValue(ir)->IsKind(STANDARD_TYPE(StepShape_ShellBasedSurfaceModel))) {
+ else if (SR->ItemsValue(ir)->IsKind(STANDARD_TYPE(StepShape_ShellBasedSurfaceModel))) {
Handle(StepShape_ShellBasedSurfaceModel) SBSM =
Handle(StepShape_ShellBasedSurfaceModel)::DownCast(SR->ItemsValue(ir));
binder = TP->Find(SBSM);
}
- else if(SR->ItemsValue(ir)->IsKind(STANDARD_TYPE(StepShape_GeometricSet))) {
+ else if (SR->ItemsValue(ir)->IsKind(STANDARD_TYPE(StepShape_GeometricSet))) {
Handle(StepShape_GeometricSet) GS =
Handle(StepShape_GeometricSet)::DownCast(SR->ItemsValue(ir));
binder = TP->Find(GS);
}
}
- if ( binder.IsNull() || ! binder->HasResult() ) continue;
+ if (binder.IsNull() || !binder->HasResult()) continue;
TopoDS_Shape S;
- S = TransferBRep::ShapeResult ( TP, binder );
- if(S.IsNull()) continue;
- if ( ShapeLabelMap.IsBound ( S ) )
- L = ShapeLabelMap.Find ( S );
- if ( L.IsNull() )
- STool->Search ( S, L, Standard_True, Standard_True, Standard_True );
+ S = TransferBRep::ShapeResult(TP, binder);
+ if (S.IsNull()) continue;
+ if (ShapeLabelMap.IsBound(S))
+ L = ShapeLabelMap.Find(S);
+ if (L.IsNull())
+ STool->Search(S, L, Standard_True, Standard_True, Standard_True);
}
}
- if(L.IsNull()) continue;
-
+ if (L.IsNull()) continue;
+
// decode validation properties
Handle(StepRepr_Representation) rep = PDR->UsedRepresentation();
- for ( Standard_Integer j=1; j <= rep->NbItems(); j++ ) {
+ for (Standard_Integer j = 1; j <= rep->NbItems(); j++) {
Handle(StepRepr_RepresentationItem) ent = rep->ItemsValue(j);
Standard_Boolean isArea;
Standard_Real val;
gp_Pnt pos;
- if ( Props.GetPropReal ( ent, val, isArea ) ) {
- if ( isArea ) XCAFDoc_Area::Set ( L, val );
- else XCAFDoc_Volume::Set ( L, val );
+ if (Props.GetPropReal(ent, val, isArea)) {
+ if (isArea) XCAFDoc_Area::Set(L, val);
+ else XCAFDoc_Volume::Set(L, val);
}
- else if ( Props.GetPropPnt ( ent, rep->ContextOfItems(), pos ) ) {
- XCAFDoc_Centroid::Set ( L, pos );
+ else if (Props.GetPropPnt(ent, rep->ContextOfItems(), pos)) {
+ XCAFDoc_Centroid::Set(L, pos);
}
}
}
//purpose :
//=======================================================================
-Standard_Boolean STEPCAFControl_Reader::ReadLayers (const Handle(XSControl_WorkSession) &WS,
- Handle(TDocStd_Document)& Doc) const
+Standard_Boolean STEPCAFControl_Reader::ReadLayers(const Handle(XSControl_WorkSession) &WS,
+ Handle(TDocStd_Document)& Doc) const
{
const Handle(Interface_InterfaceModel) &Model = WS->Model();
const Handle(XSControl_TransferReader) &TR = WS->TransferReader();
const Handle(Transfer_TransientProcess) &TP = TR->TransientProcess();
- Handle(XCAFDoc_ShapeTool) STool = XCAFDoc_DocumentTool::ShapeTool( Doc->Main() );
- if ( STool.IsNull() ) return Standard_False;
- Handle(XCAFDoc_LayerTool) LTool = XCAFDoc_DocumentTool::LayerTool( Doc->Main() );
- if ( LTool.IsNull() ) return Standard_False;
-
+ Handle(XCAFDoc_ShapeTool) STool = XCAFDoc_DocumentTool::ShapeTool(Doc->Main());
+ if (STool.IsNull()) return Standard_False;
+ Handle(XCAFDoc_LayerTool) LTool = XCAFDoc_DocumentTool::LayerTool(Doc->Main());
+ if (LTool.IsNull()) return Standard_False;
+
Handle(Standard_Type) tSVPLA = STANDARD_TYPE(StepVisual_PresentationLayerAssignment);
Standard_Integer nb = Model->NbEntities();
Handle(TCollection_HAsciiString) name;
-
- for (Standard_Integer i = 1; i <= nb; i ++) {
+
+ for (Standard_Integer i = 1; i <= nb; i++) {
Handle(Standard_Transient) enti = Model->Value(i);
- if ( ! enti->IsKind ( tSVPLA ) ) continue;
- Handle(StepVisual_PresentationLayerAssignment) SVPLA =
+ if (!enti->IsKind(tSVPLA)) continue;
+ Handle(StepVisual_PresentationLayerAssignment) SVPLA =
Handle(StepVisual_PresentationLayerAssignment)::DownCast(enti);
if (SVPLA->AssignedItems().IsNull())
continue;
-
+
Handle(TCollection_HAsciiString) descr = SVPLA->Description();
Handle(TCollection_HAsciiString) hName = SVPLA->Name();
- TCollection_ExtendedString aLayerName ( hName->String() );
-
+ TCollection_ExtendedString aLayerName(hName->String());
+
// find a target shape and its label in the document
- for (Standard_Integer j = 1; j <= SVPLA->NbAssignedItems(); j++ ) {
+ for (Standard_Integer j = 1; j <= SVPLA->NbAssignedItems(); j++) {
StepVisual_LayeredItem LI = SVPLA->AssignedItemsValue(j);
- Handle(Transfer_Binder) binder = TP->Find( LI.Value() );
- if ( binder.IsNull() || ! binder->HasResult() ) continue;
-
- TopoDS_Shape S = TransferBRep::ShapeResult ( TP, binder );
- if ( S.IsNull() ) continue;
-
+ Handle(Transfer_Binder) binder = TP->Find(LI.Value());
+ if (binder.IsNull() || !binder->HasResult()) continue;
+
+ TopoDS_Shape S = TransferBRep::ShapeResult(TP, binder);
+ if (S.IsNull()) continue;
+
TDF_Label shL;
- if ( ! STool->Search ( S, shL, Standard_True, Standard_True, Standard_True ) ) continue;
- LTool->SetLayer ( shL, aLayerName );
+ if (!STool->Search(S, shL, Standard_True, Standard_True, Standard_True)) continue;
+ LTool->SetLayer(shL, aLayerName);
}
-
+
// check invisibility
Interface_EntityIterator subs = WS->Graph().Sharings(SVPLA);
for (subs.Start(); subs.More(); subs.Next()) {
- if ( ! subs.Value()->IsKind(STANDARD_TYPE(StepVisual_Invisibility)) ) continue;
+ if (!subs.Value()->IsKind(STANDARD_TYPE(StepVisual_Invisibility))) continue;
#ifdef OCCT_DEBUG
- cout<< "\tLayer \"" << aLayerName << "\" is invisible"<<endl;
+ cout << "\tLayer \"" << aLayerName << "\" is invisible" << endl;
#endif
//TDF_Label InvLayerLab = LTool->FindLayer(aLayerName);
TDF_Label InvLayerLab = LTool->AddLayer(aLayerName); //skl for OCC3926
Handle(TDataStd_UAttribute) aUAttr;
- aUAttr->Set( InvLayerLab, XCAFDoc::InvisibleGUID() );
+ aUAttr->Set(InvLayerLab, XCAFDoc::InvisibleGUID());
}
}
return Standard_True;
//purpose :
//=======================================================================
-static Standard_Boolean findNextSHUOlevel (const Handle(XSControl_WorkSession) &WS,
- const Handle(StepRepr_SpecifiedHigherUsageOccurrence)& SHUO,
- const Handle(XCAFDoc_ShapeTool)& STool,
- const STEPCAFControl_DataMapOfPDExternFile &PDFileMap,
- const XCAFDoc_DataMapOfShapeLabel &ShapeLabelMap,
- TDF_LabelSequence& aLabels)
+static Standard_Boolean findNextSHUOlevel(const Handle(XSControl_WorkSession) &WS,
+ const Handle(StepRepr_SpecifiedHigherUsageOccurrence)& SHUO,
+ const Handle(XCAFDoc_ShapeTool)& STool,
+ const STEPCAFControl_DataMapOfPDExternFile &PDFileMap,
+ const XCAFDoc_DataMapOfShapeLabel &ShapeLabelMap,
+ TDF_LabelSequence& aLabels)
{
Interface_EntityIterator subs = WS->HGraph()->Graph().Sharings(SHUO);
Handle(StepRepr_SpecifiedHigherUsageOccurrence) subSHUO;
}
if (subSHUO.IsNull())
return Standard_False;
-
+
Handle(StepRepr_NextAssemblyUsageOccurrence) NUNAUO = subSHUO->NextUsage();
if (NUNAUO.IsNull())
return Standard_False;
-// Handle(Interface_InterfaceModel) Model = WS->Model();
-// Handle(XSControl_TransferReader) TR = WS->TransferReader();
-// Handle(Transfer_TransientProcess) TP = TR->TransientProcess();
-// Handle(Transfer_Binder) binder = TP->Find(NUNAUO);
-// if ( binder.IsNull() || ! binder->HasResult() )
-// return Standard_False;
-// TopoDS_Shape NUSh = TransferBRep::ShapeResult ( TP, binder );
- // get label of NAUO next level
+ // Handle(Interface_InterfaceModel) Model = WS->Model();
+ // Handle(XSControl_TransferReader) TR = WS->TransferReader();
+ // Handle(Transfer_TransientProcess) TP = TR->TransientProcess();
+ // Handle(Transfer_Binder) binder = TP->Find(NUNAUO);
+ // if ( binder.IsNull() || ! binder->HasResult() )
+ // return Standard_False;
+ // TopoDS_Shape NUSh = TransferBRep::ShapeResult ( TP, binder );
+ // get label of NAUO next level
TDF_Label NULab;
- STEPConstruct_Tool Tool( WS );
- NULab = STEPCAFControl_Reader::FindInstance ( NUNAUO, STool, Tool, ShapeLabelMap );
-// STool->Search(NUSh, NUlab);
+ STEPConstruct_Tool Tool(WS);
+ NULab = STEPCAFControl_Reader::FindInstance(NUNAUO, STool, Tool, ShapeLabelMap);
+ // STool->Search(NUSh, NUlab);
if (NULab.IsNull())
return Standard_False;
- aLabels.Append( NULab );
+ aLabels.Append(NULab);
// and check by recurse.
- findNextSHUOlevel( WS, subSHUO, STool, PDFileMap, ShapeLabelMap, aLabels );
+ findNextSHUOlevel(WS, subSHUO, STool, PDFileMap, ShapeLabelMap, aLabels);
return Standard_True;
}
//function : setSHUOintoDoc
//purpose : auxilary
//=======================================================================
-static TDF_Label setSHUOintoDoc (const Handle(XSControl_WorkSession) &WS,
- const Handle(StepRepr_SpecifiedHigherUsageOccurrence)& SHUO,
- const Handle(XCAFDoc_ShapeTool)& STool,
- const STEPCAFControl_DataMapOfPDExternFile &PDFileMap,
- const XCAFDoc_DataMapOfShapeLabel &ShapeLabelMap)
+static TDF_Label setSHUOintoDoc(const Handle(XSControl_WorkSession) &WS,
+ const Handle(StepRepr_SpecifiedHigherUsageOccurrence)& SHUO,
+ const Handle(XCAFDoc_ShapeTool)& STool,
+ const STEPCAFControl_DataMapOfPDExternFile &PDFileMap,
+ const XCAFDoc_DataMapOfShapeLabel &ShapeLabelMap)
{
TDF_Label aMainLabel;
// get upper usage NAUO from SHUO.
Handle(StepRepr_NextAssemblyUsageOccurrence) UUNAUO =
Handle(StepRepr_NextAssemblyUsageOccurrence)::DownCast(SHUO->UpperUsage());
Handle(StepRepr_NextAssemblyUsageOccurrence) NUNAUO = SHUO->NextUsage();
- if ( UUNAUO.IsNull() || NUNAUO.IsNull() ) {
+ if (UUNAUO.IsNull() || NUNAUO.IsNull()) {
#ifdef OCCT_DEBUG
- cout << "Warning: " << __FILE__ <<": Upper_usage or Next_usage of styled SHUO is null. Skip it" << endl;
+ cout << "Warning: " << __FILE__ << ": Upper_usage or Next_usage of styled SHUO is null. Skip it" << endl;
#endif
return aMainLabel;
}
-// Handle(Interface_InterfaceModel) Model = WS->Model();
-// Handle(XSControl_TransferReader) TR = WS->TransferReader();
-// Handle(Transfer_TransientProcess) TP = TR->TransientProcess();
-// TopoDS_Shape UUSh, NUSh;
-// Handle(Transfer_Binder) binder = TP->Find(UUNAUO);
-// if ( binder.IsNull() || ! binder->HasResult() )
-// return aMainLabel;
-// UUSh = TransferBRep::ShapeResult ( TP, binder );
-// binder = TP->Find(NUNAUO);
-// if ( binder.IsNull() || ! binder->HasResult() )
-// return aMainLabel;
-// NUSh = TransferBRep::ShapeResult ( TP, binder );
-
- // get first labels for first SHUO attribute
+ // Handle(Interface_InterfaceModel) Model = WS->Model();
+ // Handle(XSControl_TransferReader) TR = WS->TransferReader();
+ // Handle(Transfer_TransientProcess) TP = TR->TransientProcess();
+ // TopoDS_Shape UUSh, NUSh;
+ // Handle(Transfer_Binder) binder = TP->Find(UUNAUO);
+ // if ( binder.IsNull() || ! binder->HasResult() )
+ // return aMainLabel;
+ // UUSh = TransferBRep::ShapeResult ( TP, binder );
+ // binder = TP->Find(NUNAUO);
+ // if ( binder.IsNull() || ! binder->HasResult() )
+ // return aMainLabel;
+ // NUSh = TransferBRep::ShapeResult ( TP, binder );
+
+ // get first labels for first SHUO attribute
TDF_Label UULab, NULab;
- STEPConstruct_Tool Tool( WS );
- UULab = STEPCAFControl_Reader::FindInstance ( UUNAUO, STool, Tool, ShapeLabelMap );
- NULab = STEPCAFControl_Reader::FindInstance ( NUNAUO, STool, Tool, ShapeLabelMap );
-
-// STool->Search(UUSh, UULab);
-// STool->Search(NUSh, NULab);
+ STEPConstruct_Tool Tool(WS);
+ UULab = STEPCAFControl_Reader::FindInstance(UUNAUO, STool, Tool, ShapeLabelMap);
+ NULab = STEPCAFControl_Reader::FindInstance(NUNAUO, STool, Tool, ShapeLabelMap);
+
+ // STool->Search(UUSh, UULab);
+ // STool->Search(NUSh, NULab);
if (UULab.IsNull() || NULab.IsNull()) return aMainLabel;
//create sequence fo labels to set SHUO structure into the document
TDF_LabelSequence ShuoLabels;
- ShuoLabels.Append( UULab );
- ShuoLabels.Append( NULab );
+ ShuoLabels.Append(UULab);
+ ShuoLabels.Append(NULab);
// add all other labels of sub SHUO entities
- findNextSHUOlevel( WS, SHUO, STool, PDFileMap, ShapeLabelMap, ShuoLabels );
+ findNextSHUOlevel(WS, SHUO, STool, PDFileMap, ShapeLabelMap, ShuoLabels);
// last accord for SHUO
Handle(XCAFDoc_GraphNode) anSHUOAttr;
- if ( STool->SetSHUO( ShuoLabels, anSHUOAttr ) )
+ if (STool->SetSHUO(ShuoLabels, anSHUOAttr))
aMainLabel = anSHUOAttr->Label();
-
+
return aMainLabel;
}
//purpose :
//=======================================================================
-Standard_Boolean STEPCAFControl_Reader::ReadSHUOs (const Handle(XSControl_WorkSession) &WS,
- Handle(TDocStd_Document)& Doc,
- const STEPCAFControl_DataMapOfPDExternFile &PDFileMap,
- const XCAFDoc_DataMapOfShapeLabel &ShapeLabelMap) const
+Standard_Boolean STEPCAFControl_Reader::ReadSHUOs(const Handle(XSControl_WorkSession) &WS,
+ Handle(TDocStd_Document)& Doc,
+ const STEPCAFControl_DataMapOfPDExternFile &PDFileMap,
+ const XCAFDoc_DataMapOfShapeLabel &ShapeLabelMap) const
{
// the big part code duplication from ReadColors.
// It is possible to share this code functionality, just to decide how ???
- Handle(XCAFDoc_ColorTool) CTool = XCAFDoc_DocumentTool::ColorTool( Doc->Main() );
+ Handle(XCAFDoc_ColorTool) CTool = XCAFDoc_DocumentTool::ColorTool(Doc->Main());
Handle(XCAFDoc_ShapeTool) STool = CTool->ShapeTool();
-
- STEPConstruct_Styles Styles ( WS );
- if ( ! Styles.LoadStyles() ) {
+
+ STEPConstruct_Styles Styles(WS);
+ if (!Styles.LoadStyles()) {
#ifdef OCCT_DEBUG
cout << "Warning: no styles are found in the model" << endl;
#endif
}
// searching for invisible items in the model
Handle(TColStd_HSequenceOfTransient) aHSeqOfInvisStyle = new TColStd_HSequenceOfTransient;
- Styles.LoadInvisStyles( aHSeqOfInvisStyle );
+ Styles.LoadInvisStyles(aHSeqOfInvisStyle);
// parse and search for color attributes
Standard_Integer nb = Styles.NbStyles();
- for ( Standard_Integer i=1; i <= nb; i++ ) {
- Handle(StepVisual_StyledItem) style = Styles.Style ( i );
- if ( style.IsNull() ) continue;
-
+ for (Standard_Integer i = 1; i <= nb; i++) {
+ Handle(StepVisual_StyledItem) style = Styles.Style(i);
+ if (style.IsNull()) continue;
+
Standard_Boolean IsVisible = Standard_True;
// check the visibility of styled item.
- for (Standard_Integer si = 1; si <= aHSeqOfInvisStyle->Length(); si++ ) {
- if ( style != aHSeqOfInvisStyle->Value( si ) )
+ for (Standard_Integer si = 1; si <= aHSeqOfInvisStyle->Length(); si++) {
+ if (style != aHSeqOfInvisStyle->Value(si))
continue;
// found that current style is invisible.
#ifdef OCCT_DEBUG
Handle(StepVisual_Colour) SurfCol, BoundCol, CurveCol;
// check if it is component style
Standard_Boolean IsComponent = Standard_False;
- if ( ! Styles.GetColors ( style, SurfCol, BoundCol, CurveCol, IsComponent ) && IsVisible )
+ if (!Styles.GetColors(style, SurfCol, BoundCol, CurveCol, IsComponent) && IsVisible)
continue;
if (!IsComponent)
continue;
Handle(StepShape_ShapeRepresentation) aSR;
- findStyledSR( style, aSR );
+ findStyledSR(style, aSR);
// search for SR along model
- if ( aSR.IsNull() )
+ if (aSR.IsNull())
continue;
- Interface_EntityIterator subs = WS->HGraph()->Graph().Sharings( aSR );
+ Interface_EntityIterator subs = WS->HGraph()->Graph().Sharings(aSR);
Handle(StepShape_ShapeDefinitionRepresentation) aSDR;
for (subs.Start(); subs.More(); subs.Next()) {
aSDR = Handle(StepShape_ShapeDefinitionRepresentation)::DownCast(subs.Value());
- if ( aSDR.IsNull() )
+ if (aSDR.IsNull())
continue;
StepRepr_RepresentedDefinition aPDSselect = aSDR->Definition();
- Handle(StepRepr_ProductDefinitionShape) PDS =
+ Handle(StepRepr_ProductDefinitionShape) PDS =
Handle(StepRepr_ProductDefinitionShape)::DownCast(aPDSselect.PropertyDefinition());
- if ( PDS.IsNull() )
+ if (PDS.IsNull())
continue;
StepRepr_CharacterizedDefinition aCharDef = PDS->Definition();
Handle(StepRepr_SpecifiedHigherUsageOccurrence) SHUO =
Handle(StepRepr_SpecifiedHigherUsageOccurrence)::DownCast(aCharDef.ProductDefinitionRelationship());
- if ( SHUO.IsNull() )
+ if (SHUO.IsNull())
continue;
-
+
// set the SHUO structure to the document
- TDF_Label aLabelForStyle = setSHUOintoDoc( WS, SHUO, STool, PDFileMap, ShapeLabelMap );
- if ( aLabelForStyle.IsNull() ) {
+ TDF_Label aLabelForStyle = setSHUOintoDoc(WS, SHUO, STool, PDFileMap, ShapeLabelMap);
+ if (aLabelForStyle.IsNull()) {
#ifdef OCCT_DEBUG
- cout << "Warning: " << __FILE__ <<": coudnot create SHUO structure in the document" << endl;
+ cout << "Warning: " << __FILE__ << ": coudnot create SHUO structure in the document" << endl;
#endif
continue;
}
// now set the style to the SHUO main label.
- if ( ! SurfCol.IsNull() ) {
+ if (!SurfCol.IsNull()) {
Quantity_Color col;
- Styles.DecodeColor ( SurfCol, col );
- CTool->SetColor ( aLabelForStyle, col, XCAFDoc_ColorSurf );
+ Styles.DecodeColor(SurfCol, col);
+ CTool->SetColor(aLabelForStyle, col, XCAFDoc_ColorSurf);
}
- if ( ! BoundCol.IsNull() ) {
+ if (!BoundCol.IsNull()) {
Quantity_Color col;
- Styles.DecodeColor ( BoundCol, col );
- CTool->SetColor ( aLabelForStyle, col, XCAFDoc_ColorCurv );
+ Styles.DecodeColor(BoundCol, col);
+ CTool->SetColor(aLabelForStyle, col, XCAFDoc_ColorCurv);
}
- if ( ! CurveCol.IsNull() ) {
+ if (!CurveCol.IsNull()) {
Quantity_Color col;
- Styles.DecodeColor ( CurveCol, col );
- CTool->SetColor ( aLabelForStyle, col, XCAFDoc_ColorCurv );
+ Styles.DecodeColor(CurveCol, col);
+ CTool->SetColor(aLabelForStyle, col, XCAFDoc_ColorCurv);
}
- if ( !IsVisible )
+ if (!IsVisible)
// sets the invisibility for shape.
- CTool->SetVisibility( aLabelForStyle, Standard_False );
-
+ CTool->SetVisibility(aLabelForStyle, Standard_False);
+
} // end search SHUO by SDR
} // end iterates on styles
-
+
return Standard_True;
}
//purpose :
//=======================================================================
static Standard_Boolean GetMassConversionFactor(Handle(StepBasic_NamedUnit)& NU,
- Standard_Real& afact)
+ Standard_Real& afact)
{
- afact=1.;
- if( !NU->IsKind(STANDARD_TYPE(StepBasic_ConversionBasedUnitAndMassUnit)) ) return Standard_False;
+ afact = 1.;
+ if (!NU->IsKind(STANDARD_TYPE(StepBasic_ConversionBasedUnitAndMassUnit))) return Standard_False;
Handle(StepBasic_ConversionBasedUnitAndMassUnit) CBUMU =
Handle(StepBasic_ConversionBasedUnitAndMassUnit)::DownCast(NU);
Handle(StepBasic_MeasureWithUnit) MWUCBU = CBUMU->ConversionFactor();
afact = MWUCBU->ValueComponent();
StepBasic_Unit anUnit2 = MWUCBU->UnitComponent();
- if(anUnit2.CaseNum(anUnit2.Value())==1) {
+ if (anUnit2.CaseNum(anUnit2.Value()) == 1) {
Handle(StepBasic_NamedUnit) NU2 = anUnit2.NamedUnit();
- if(NU2->IsKind(STANDARD_TYPE(StepBasic_SiUnit))) {
+ if (NU2->IsKind(STANDARD_TYPE(StepBasic_SiUnit))) {
Handle(StepBasic_SiUnit) SU = Handle(StepBasic_SiUnit)::DownCast(NU2);
- if(SU->Name()==StepBasic_sunGram) {
- if(SU->HasPrefix())
- afact *= STEPConstruct_UnitContext::ConvertSiPrefix (SU->Prefix());
+ if (SU->Name() == StepBasic_sunGram) {
+ if (SU->HasPrefix())
+ afact *= STEPConstruct_UnitContext::ConvertSiPrefix(SU->Prefix());
}
}
}
// (Annotation_Curve_Occurrence or Draughting_Callout)
//=======================================================================
Standard_Boolean readPMIPresentation(const Handle(Standard_Transient)& thePresentEntity,
- const Handle(XSControl_TransferReader)& theTR,
- const Standard_Real theFact,
- TopoDS_Shape& thePresentation,
- Handle(TCollection_HAsciiString)& thePresentName,
- Bnd_Box& theBox)
+ const Handle(XSControl_TransferReader)& theTR,
+ const Standard_Real theFact,
+ TopoDS_Shape& thePresentation,
+ Handle(TCollection_HAsciiString)& thePresentName,
+ Bnd_Box& theBox)
{
if (thePresentEntity.IsNull())
return Standard_False;
//purpose : read annotation plane
//=======================================================================
Standard_Boolean readAnnotationPlane(const Handle(StepVisual_AnnotationPlane) theAnnotationPlane,
- gp_Ax2& thePlane)
+ gp_Ax2& thePlane)
{
if (theAnnotationPlane.IsNull())
return Standard_False;
//purpose : read annotation plane and position for given GDT
// (Dimension, Geometric_Tolerance, Datum_Feature or Placed_Datum_Target_Feature)
//=======================================================================
-void readAnnotation(const Handle(XSControl_TransferReader)& theTR,
+void readAnnotation(const Handle(XSControl_TransferReader)& theTR,
const Handle(Standard_Transient)& theGDT,
const Handle(Standard_Transient)& theDimObject)
{
return;
// calculate units
- Handle(StepVisual_DraughtingModel) aDModel =
+ Handle(StepVisual_DraughtingModel) aDModel =
Handle(StepVisual_DraughtingModel)::DownCast(aDMIA->UsedRepresentation());
XSAlgo::AlgoContainer()->PrepareForTransfer();
STEPControl_ActorRead anActor;
// set plane axes to XCAF
if (isHasPlane) {
if (theDimObject->IsKind(STANDARD_TYPE(XCAFDimTolObjects_DimensionObject))) {
- Handle(XCAFDimTolObjects_DimensionObject) anObj =
+ Handle(XCAFDimTolObjects_DimensionObject) anObj =
Handle(XCAFDimTolObjects_DimensionObject)::DownCast(theDimObject);
Handle(TColgp_HArray1OfPnt) aPnts = new TColgp_HArray1OfPnt(1, 1);
anObj->SetPlane(aPlaneAxes);
return;
gp_Pnt aPtext(0., 0., 0.);
// if Annotation plane location inside bounding box set it to text position
- // else set the center of bounding box to text position
+ // else set the center of bounding box to text position 0027372
if (!aBox.IsVoid())
{
Standard_Real aXmin, aYmin, aZmin, aXmax, aYmax, aZmax;
// set point to XCAF
if (theDimObject->IsKind(STANDARD_TYPE(XCAFDimTolObjects_DimensionObject))) {
- Handle(XCAFDimTolObjects_DimensionObject) anObj =
+ Handle(XCAFDimTolObjects_DimensionObject) anObj =
Handle(XCAFDimTolObjects_DimensionObject)::DownCast(theDimObject);
anObj->SetPointTextAttach(aPtext);
anObj->SetPresentation(aResAnnotation, aPresentName);
else if (theDimObject->IsKind(STANDARD_TYPE(XCAFDimTolObjects_DatumObject))) {
Handle(XCAFDimTolObjects_DatumObject) anObj =
Handle(XCAFDimTolObjects_DatumObject)::DownCast(theDimObject);
- anObj->SetPointTextAttach(aPtext);
- anObj->SetPresentation(aResAnnotation, aPresentName);
+ anObj->SetPointTextAttach(aPtext);
+ anObj->SetPresentation(aResAnnotation, aPresentName);
}
else if (theDimObject->IsKind(STANDARD_TYPE(XCAFDimTolObjects_GeomToleranceObject))) {
Handle(XCAFDimTolObjects_GeomToleranceObject) anObj =
//function : readConnectionPoints
//purpose : read connection points for given dimension
//=======================================================================
-void readConnectionPoints(const Handle(XSControl_TransferReader)& theTR,
+void readConnectionPoints(const Handle(XSControl_TransferReader)& theTR,
const Handle(Standard_Transient) theGDT,
const Handle(XCAFDimTolObjects_DimensionObject)& theDimObject)
{
Handle(Transfer_TransientProcess) aTP = theTR->TransientProcess();
const Interface_Graph& aGraph = aTP->Graph();
- //calculate units
+
+ Standard_Real aFact = 1.;
+
Handle(StepShape_ShapeDimensionRepresentation) aSDR = NULL;
for (Interface_EntityIterator anIt = aGraph.Sharings(theGDT); aSDR.IsNull() && anIt.More(); anIt.Next()) {
- aSDR = Handle(StepShape_ShapeDimensionRepresentation)::DownCast(anIt.Value());
+ Handle(Standard_Transient) anEnt = anIt.Value();
+ Handle(StepShape_DimensionalCharacteristicRepresentation) aDCR =
+ Handle(StepShape_DimensionalCharacteristicRepresentation)::DownCast(anEnt);
+ if (!aDCR.IsNull())
+ aSDR = !aDCR.IsNull() ? aDCR->Representation() : Handle(StepShape_ShapeDimensionRepresentation)::DownCast(anEnt);
}
- XSAlgo::AlgoContainer()->PrepareForTransfer();
- STEPControl_ActorRead anActor;
- anActor.PrepareUnits(aSDR, aTP);
- Standard_Real aFact = UnitsMethods::LengthFactor();
-
+ if (!aSDR.IsNull())
+ {
+ XSAlgo::AlgoContainer()->PrepareForTransfer();
+ STEPControl_ActorRead anActor;
+ anActor.PrepareUnits(aSDR, aTP);
+ aFact = UnitsMethods::LengthFactor();
+ }
+
if (theGDT->IsKind(STANDARD_TYPE(StepShape_DimensionalSize))) {
// retrieve derived geometry
Handle(StepShape_DimensionalSize) aDim = Handle(StepShape_DimensionalSize)::DownCast(theGDT);
return;
aPoint = anA2P3D->Location();
}
-
+
// set connection point to object
gp_Pnt aPnt(aPoint->CoordinatesValue(1) * aFact, aPoint->CoordinatesValue(2) * aFact, aPoint->CoordinatesValue(3) * aFact);
theDimObject->SetPoint(aPnt);
//purpose : auxilary
//=======================================================================
static Standard_Boolean ReadDatums(const Handle(XCAFDoc_ShapeTool) &STool,
- const Handle(XCAFDoc_DimTolTool) &DGTTool,
- const Interface_Graph &graph,
- const Handle(Transfer_TransientProcess) &TP,
- const TDF_Label TolerL,
- const Handle(StepDimTol_GeometricToleranceWithDatumReference) GTWDR)
+ const Handle(XCAFDoc_DimTolTool) &DGTTool,
+ const Interface_Graph &graph,
+ const Handle(Transfer_TransientProcess) &TP,
+ const TDF_Label TolerL,
+ const Handle(StepDimTol_GeometricToleranceWithDatumReference) GTWDR)
{
- if(GTWDR.IsNull()) return Standard_False;
+ if (GTWDR.IsNull()) return Standard_False;
Handle(StepDimTol_HArray1OfDatumReference) HADR = GTWDR->DatumSystem();
- if(HADR.IsNull()) return Standard_False;
- for(Standard_Integer idr=1; idr<=HADR->Length(); idr++) {
+ if (HADR.IsNull()) return Standard_False;
+ for (Standard_Integer idr = 1; idr <= HADR->Length(); idr++) {
Handle(StepDimTol_DatumReference) DR = HADR->Value(idr);
Handle(StepDimTol_Datum) aDatum = DR->ReferencedDatum();
- if(aDatum.IsNull()) continue;
+ if (aDatum.IsNull()) continue;
Interface_EntityIterator subs4 = graph.Sharings(aDatum);
- for(subs4.Start(); subs4.More(); subs4.Next()) {
- Handle(StepRepr_ShapeAspectRelationship) SAR =
+ for (subs4.Start(); subs4.More(); subs4.Next()) {
+ Handle(StepRepr_ShapeAspectRelationship) SAR =
Handle(StepRepr_ShapeAspectRelationship)::DownCast(subs4.Value());
- if(SAR.IsNull()) continue;
- Handle(StepDimTol_DatumFeature) DF =
+ if (SAR.IsNull()) continue;
+ Handle(StepDimTol_DatumFeature) DF =
Handle(StepDimTol_DatumFeature)::DownCast(SAR->RelatingShapeAspect());
- if(DF.IsNull()) continue;
+ if (DF.IsNull()) continue;
Interface_EntityIterator subs5 = graph.Sharings(DF);
Handle(StepRepr_PropertyDefinition) PropDef;
- for(subs5.Start(); subs5.More() && PropDef.IsNull(); subs5.Next()) {
+ for (subs5.Start(); subs5.More() && PropDef.IsNull(); subs5.Next()) {
PropDef = Handle(StepRepr_PropertyDefinition)::DownCast(subs5.Value());
}
- if(PropDef.IsNull()) continue;
+ if (PropDef.IsNull()) continue;
Handle(StepShape_AdvancedFace) AF;
subs5 = graph.Sharings(PropDef);
- for(subs5.Start(); subs5.More(); subs5.Next()) {
- Handle(StepShape_ShapeDefinitionRepresentation) SDR =
+ for (subs5.Start(); subs5.More(); subs5.Next()) {
+ Handle(StepShape_ShapeDefinitionRepresentation) SDR =
Handle(StepShape_ShapeDefinitionRepresentation)::DownCast(subs5.Value());
- if(!SDR.IsNull()) {
+ if (!SDR.IsNull()) {
Handle(StepRepr_Representation) Repr = SDR->UsedRepresentation();
- if( !Repr.IsNull() && Repr->NbItems()>0 ) {
+ if (!Repr.IsNull() && Repr->NbItems() > 0) {
Handle(StepRepr_RepresentationItem) RI = Repr->ItemsValue(1);
AF = Handle(StepShape_AdvancedFace)::DownCast(RI);
}
}
}
- if(AF.IsNull()) return Standard_False;
+ if (AF.IsNull()) return Standard_False;
Standard_Integer index = TP->MapIndex(AF);
TopoDS_Shape aSh;
- if(index >0) {
+ if (index > 0) {
Handle(Transfer_Binder) binder = TP->MapItem(index);
aSh = TransferBRep::ShapeResult(binder);
}
- if(aSh.IsNull()) continue;
+ if (aSh.IsNull()) continue;
TDF_Label shL;
- if( !STool->Search(aSh, shL, Standard_True, Standard_True, Standard_True) ) continue;
- DGTTool->SetDatum(shL,TolerL,PropDef->Name(),PropDef->Description(),aDatum->Identification());
+ if (!STool->Search(aSh, shL, Standard_True, Standard_True, Standard_True)) continue;
+ DGTTool->SetDatum(shL, TolerL, PropDef->Name(), PropDef->Description(), aDatum->Identification());
}
}
return Standard_True;
//purpose :
//=======================================================================
static void collectShapeAspect(const Handle(StepRepr_ShapeAspect)& theSA,
- const Handle(XSControl_WorkSession)& theWS,
- NCollection_Sequence<Handle(StepRepr_ShapeAspect)>& theSAs)
+ const Handle(XSControl_WorkSession)& theWS,
+ NCollection_Sequence<Handle(StepRepr_ShapeAspect)>& theSAs)
{
if (theSA.IsNull())
return;
Interface_EntityIterator anIter = aGraph.Sharings(theSA);
for (; anIter.More(); anIter.Next()) {
if (anIter.Value()->IsKind(STANDARD_TYPE(StepRepr_ShapeAspectRelationship)) &&
- !anIter.Value()->IsKind(STANDARD_TYPE(StepShape_DimensionalLocation))) {
+ !anIter.Value()->IsKind(STANDARD_TYPE(StepShape_DimensionalLocation))) {
Handle(StepRepr_ShapeAspectRelationship) aSAR =
Handle(StepRepr_ShapeAspectRelationship)::DownCast(anIter.Value());
if (aSAR->RelatingShapeAspect() == theSA && !aSAR->RelatedShapeAspect().IsNull()
- && !aSAR->RelatedShapeAspect()->IsKind(STANDARD_TYPE(StepDimTol_Datum))) {
+ && !aSAR->RelatedShapeAspect()->IsKind(STANDARD_TYPE(StepDimTol_Datum))) {
collectShapeAspect(aSAR->RelatedShapeAspect(), theWS, theSAs);
isSimple = Standard_False;
}
//=======================================================================
static TDF_Label getShapeLabel(const Handle(StepRepr_RepresentationItem)& theItem,
- const Handle(XSControl_WorkSession)& theWS,
- const Handle(XCAFDoc_ShapeTool)& theShapeTool)
+ const Handle(XSControl_WorkSession)& theWS,
+ const Handle(XCAFDoc_ShapeTool)& theShapeTool)
{
TDF_Label aShapeL;
const Handle(Transfer_TransientProcess) &aTP = theWS->TransferReader()->TransientProcess();
//=======================================================================
Standard_Boolean STEPCAFControl_Reader::setDatumToXCAF(const Handle(StepDimTol_Datum)& theDat,
- const TDF_Label theGDTL,
- const Standard_Integer thePositionCounter,
- const XCAFDimTolObjects_DatumModifiersSequence& theXCAFModifiers,
- const XCAFDimTolObjects_DatumModifWithValue theXCAFModifWithVal,
- const Standard_Real theModifValue,
- const Handle(TDocStd_Document)& theDoc,
- const Handle(XSControl_WorkSession)& theWS)
+ const TDF_Label theGDTL,
+ const Standard_Integer thePositionCounter,
+ const XCAFDimTolObjects_DatumModifiersSequence& theXCAFModifiers,
+ const XCAFDimTolObjects_DatumModifWithValue theXCAFModifWithVal,
+ const Standard_Real theModifValue,
+ const Handle(TDocStd_Document)& theDoc,
+ const Handle(XSControl_WorkSession)& theWS)
{
Handle(XCAFDoc_ShapeTool) aSTool = XCAFDoc_DocumentTool::ShapeTool(theDoc->Main());
Handle(XCAFDoc_DimTolTool) aDGTTool = XCAFDoc_DocumentTool::DimTolTool(theDoc->Main());
//purpose : auxilary
//=======================================================================
Standard_Boolean STEPCAFControl_Reader::readDatumsAP242(const Handle(Standard_Transient)& theEnt,
- const TDF_Label theGDTL,
- const Handle(TDocStd_Document)& theDoc,
- const Handle(XSControl_WorkSession)& theWS)
+ const TDF_Label theGDTL,
+ const Handle(TDocStd_Document)& theDoc,
+ const Handle(XSControl_WorkSession)& theWS)
{
const Handle(XSControl_TransferReader) &aTR = theWS->TransferReader();
const Handle(Transfer_TransientProcess) &aTP = aTR->TransientProcess();
const Interface_Graph& aGraph = aTP->Graph();
Interface_EntityIterator anIter = aGraph.Shareds(theEnt);
- for(anIter.Start(); anIter.More(); anIter.Next()) {
+ for (anIter.Start(); anIter.More(); anIter.Next()) {
Handle(Standard_Transient) anAtr = anIter.Value();
- if(anAtr->IsKind(STANDARD_TYPE(StepDimTol_DatumSystem)))
+ if (anAtr->IsKind(STANDARD_TYPE(StepDimTol_DatumSystem)))
{
Standard_Integer aPositionCounter = 0;//position on frame
Handle(StepDimTol_DatumSystem) aDS = Handle(StepDimTol_DatumSystem)::DownCast(anAtr);
Interface_EntityIterator anIterDS = aGraph.Sharings(aDS);
- for(anIterDS.Start(); anIterDS.More(); anIterDS.Next()) {
+ for (anIterDS.Start(); anIterDS.More(); anIterDS.Next()) {
Handle(Standard_Transient) anAtrDS = anIterDS.Value();
- if(anAtrDS->IsKind(STANDARD_TYPE(StepAP242_GeometricItemSpecificUsage)))
+ if (anAtrDS->IsKind(STANDARD_TYPE(StepAP242_GeometricItemSpecificUsage)))
{
//get axis
Handle(StepAP242_GeometricItemSpecificUsage)aAxGISUI
Handle(StepGeom_Axis2Placement3d) anAx
= Handle(StepGeom_Axis2Placement3d)::DownCast(aAxGISUI->IdentifiedItemValue(1));
Handle(XCAFDoc_GeomTolerance) aTol;
- if(theGDTL.FindAttribute(XCAFDoc_GeomTolerance::GetID(), aTol))
+ if (theGDTL.FindAttribute(XCAFDoc_GeomTolerance::GetID(), aTol))
{
Handle(XCAFDimTolObjects_GeomToleranceObject) anObj = aTol->GetObject();
Handle(TColStd_HArray1OfReal) aDirArr = anAx->Axis()->DirectionRatios();
gp_Dir aDir;
gp_Dir aDirR;
gp_Pnt aPnt;
- if(!aDirArr.IsNull() && aDirArr->Length() > 2 &&
- !aDirRArr.IsNull() && aDirRArr->Length() > 2 &&
+ if (!aDirArr.IsNull() && aDirArr->Length() > 2 &&
+ !aDirRArr.IsNull() && aDirRArr->Length() > 2 &&
!aLocArr.IsNull() && aLocArr->Length() > 2)
{
- aDir.SetCoord(aDirArr->Lower(), aDirArr->Lower()+1, aDirArr->Lower()+2);
- aDirR.SetCoord(aDirRArr->Lower(), aDirRArr->Lower()+1, aDirRArr->Lower()+2);
- aPnt.SetCoord(aLocArr->Lower(), aLocArr->Lower()+1, aLocArr->Lower()+2);
+ aDir.SetCoord(aDirArr->Lower(), aDirArr->Lower() + 1, aDirArr->Lower() + 2);
+ aDirR.SetCoord(aDirRArr->Lower(), aDirRArr->Lower() + 1, aDirRArr->Lower() + 2);
+ aPnt.SetCoord(aLocArr->Lower(), aLocArr->Lower() + 1, aLocArr->Lower() + 2);
gp_Ax2 anA(aPnt, aDir, aDirR);
anObj->SetAxis(anA);
aTol->SetObject(anObj);
{
//get datum feature and datum target from datum system
Handle(StepDimTol_HArray1OfDatumReferenceCompartment) aDRCA = aDS->Constituents();
- if(!aDRCA.IsNull())
+ if (!aDRCA.IsNull())
{
- for(Standard_Integer i = aDRCA->Lower(); i <= aDRCA->Upper(); i++)
+ for (Standard_Integer i = aDRCA->Lower(); i <= aDRCA->Upper(); i++)
{
Handle(StepDimTol_DatumReferenceCompartment) aDRC = aDRCA->Value(i);
//gete modifiers
XCAFDimTolObjects_DatumModifiersSequence aXCAFModifiers;
XCAFDimTolObjects_DatumModifWithValue aXCAFModifWithVal = XCAFDimTolObjects_DatumModifWithValue_None;
Standard_Real aModifValue = 0;
- if(!aModif.IsNull())
+ if (!aModif.IsNull())
{
- for(Standard_Integer m = aModif->Lower(); m <= aModif->Upper(); m++)
+ for (Standard_Integer m = aModif->Lower(); m <= aModif->Upper(); m++)
{
- if(aModif->Value(m).CaseNumber() == 2)
+ if (aModif->Value(m).CaseNumber() == 2)
aXCAFModifiers.Append(
(XCAFDimTolObjects_DatumSingleModif)aModif->Value(m).
- SimpleDatumReferenceModifierMember()->Value());
+ SimpleDatumReferenceModifierMember()->Value());
else if (aModif->Value(m).CaseNumber() == 1)
{
aXCAFModifWithVal = (XCAFDimTolObjects_DatumModifWithValue)(aModif->Value(m).DatumReferenceModifierWithValue()->ModifierType() + 1);
Standard_Real aVal = aModif->Value(m).DatumReferenceModifierWithValue()->ModifierValue()->ValueComponent();
StepBasic_Unit anUnit = aModif->Value(m).DatumReferenceModifierWithValue()->ModifierValue()->UnitComponent();
- if(anUnit.IsNull()) continue;
- if( !(anUnit.CaseNum(anUnit.Value())==1) ) continue;
+ if (anUnit.IsNull()) continue;
+ if (!(anUnit.CaseNum(anUnit.Value()) == 1)) continue;
Handle(StepBasic_NamedUnit) NU = anUnit.NamedUnit();
STEPConstruct_UnitContext anUnitCtx;
anUnitCtx.ComputeFactors(NU);
}
aPositionCounter++;
Interface_EntityIterator anIterDRC = aGraph.Shareds(aDRC);
- for(anIterDRC.Start(); anIterDRC.More(); anIterDRC.Next()) {
-
- if(anIterDRC.Value()->IsKind(STANDARD_TYPE(StepDimTol_Datum)))
+ for (anIterDRC.Start(); anIterDRC.More(); anIterDRC.Next()) {
+
+ if (anIterDRC.Value()->IsKind(STANDARD_TYPE(StepDimTol_Datum)))
{
Handle(StepDimTol_Datum) aD = Handle(StepDimTol_Datum)::DownCast(anIterDRC.Value());
- setDatumToXCAF(aD, theGDTL, aPositionCounter, aXCAFModifiers, aXCAFModifWithVal, aModifValue,theDoc, theWS);
+ setDatumToXCAF(aD, theGDTL, aPositionCounter, aXCAFModifiers, aXCAFModifWithVal, aModifValue, theDoc, theWS);
}
- else if(anIterDRC.Value()->IsKind(STANDARD_TYPE(StepDimTol_DatumReferenceElement)))
+ else if (anIterDRC.Value()->IsKind(STANDARD_TYPE(StepDimTol_DatumReferenceElement)))
{
- Handle(StepDimTol_DatumReferenceElement) aDRE
+ Handle(StepDimTol_DatumReferenceElement) aDRE
= Handle(StepDimTol_DatumReferenceElement)::DownCast(anIterDRC.Value());
//get modifiers from group of datums
Handle(StepDimTol_HArray1OfDatumReferenceModifier) aModifE = aDRE->Modifiers();
- if(!aModifE.IsNull())
+ if (!aModifE.IsNull())
{
- for(Standard_Integer k = aModifE->Lower(); k <= aModifE->Upper(); k++)
+ for (Standard_Integer k = aModifE->Lower(); k <= aModifE->Upper(); k++)
{
- if(aModifE->Value(k).CaseNumber() == 2)
+ if (aModifE->Value(k).CaseNumber() == 2)
aXCAFModifiers.Append(
(XCAFDimTolObjects_DatumSingleModif)aModifE->Value(k).
- SimpleDatumReferenceModifierMember()->Value());
+ SimpleDatumReferenceModifierMember()->Value());
else if (aModifE->Value(k).CaseNumber() == 1)
{
aXCAFModifWithVal = (XCAFDimTolObjects_DatumModifWithValue)(aModifE->Value(k).DatumReferenceModifierWithValue()->ModifierType() + 1);
Standard_Real aVal = aModifE->Value(k).DatumReferenceModifierWithValue()->ModifierValue()->ValueComponent();
StepBasic_Unit anUnit = aModifE->Value(k).DatumReferenceModifierWithValue()->ModifierValue()->UnitComponent();
- if(anUnit.IsNull()) continue;
- if( !(anUnit.CaseNum(anUnit.Value())==1) ) continue;
+ if (anUnit.IsNull()) continue;
+ if (!(anUnit.CaseNum(anUnit.Value()) == 1)) continue;
Handle(StepBasic_NamedUnit) NU = anUnit.NamedUnit();
STEPConstruct_UnitContext anUnitCtx;
anUnitCtx.ComputeFactors(NU);
}
}
Interface_EntityIterator anIterDRE = aGraph.Shareds(aDRE);
- for(anIterDRE.Start(); anIterDRE.More(); anIterDRE.Next()) {
- if(anIterDRE.Value()->IsKind(STANDARD_TYPE(StepDimTol_Datum)))
+ for (anIterDRE.Start(); anIterDRE.More(); anIterDRE.Next()) {
+ if (anIterDRE.Value()->IsKind(STANDARD_TYPE(StepDimTol_Datum)))
{
Handle(StepDimTol_Datum) aD = Handle(StepDimTol_Datum)::DownCast(anIterDRE.Value());
- setDatumToXCAF(aD, theGDTL, aPositionCounter, aXCAFModifiers, aXCAFModifWithVal, aModifValue,theDoc, theWS);
+ setDatumToXCAF(aD, theGDTL, aPositionCounter, aXCAFModifiers, aXCAFModifWithVal, aModifValue, theDoc, theWS);
}
}
}
//purpose :
//=======================================================================
TDF_Label STEPCAFControl_Reader::createGDTObjectInXCAF(const Handle(Standard_Transient)& theEnt,
- const Handle(TDocStd_Document)& theDoc,
- const Handle(XSControl_WorkSession)& theWS)
+ const Handle(TDocStd_Document)& theDoc,
+ const Handle(XSControl_WorkSession)& theWS)
{
TDF_Label aGDTL;
- if(!theEnt->IsKind(STANDARD_TYPE(StepShape_DimensionalSize)) &&
- !theEnt->IsKind(STANDARD_TYPE(StepShape_DimensionalLocation)) &&
- !theEnt->IsKind(STANDARD_TYPE(StepDimTol_GeometricTolerance)))
+ if (!theEnt->IsKind(STANDARD_TYPE(StepShape_DimensionalSize)) &&
+ !theEnt->IsKind(STANDARD_TYPE(StepShape_DimensionalLocation)) &&
+ !theEnt->IsKind(STANDARD_TYPE(StepDimTol_GeometricTolerance)))
{
return aGDTL;
}
aSemanticName = aDim->Name();
}
- Handle(XCAFDoc_ShapeTool) aSTool = XCAFDoc_DocumentTool::ShapeTool( theDoc->Main() );
- Handle(XCAFDoc_DimTolTool) aDGTTool = XCAFDoc_DocumentTool::DimTolTool( theDoc->Main() );
+ Handle(XCAFDoc_ShapeTool) aSTool = XCAFDoc_DocumentTool::ShapeTool(theDoc->Main());
+ Handle(XCAFDoc_DimTolTool) aDGTTool = XCAFDoc_DocumentTool::DimTolTool(theDoc->Main());
const Handle(XSControl_TransferReader) &aTR = theWS->TransferReader();
const Handle(Transfer_TransientProcess) &aTP = aTR->TransientProcess();
const Interface_Graph& aGraph = aTP->Graph();
Standard_Boolean isAllAround = Standard_False;
Standard_Boolean isAllOver = Standard_False;
-
+
// find RepresentationItem for current Ent
NCollection_Sequence<Handle(Standard_Transient)> aSeqRI1, aSeqRI2;
// Collect all Shape_Aspect entities
Interface_EntityIterator anIter = aGraph.Shareds(theEnt);
- for(anIter.Start(); anIter.More(); anIter.Next()) {
+ for (anIter.Start(); anIter.More(); anIter.Next()) {
Handle(Standard_Transient) anAtr = anIter.Value();
NCollection_Sequence<Handle(StepRepr_ShapeAspect)> aSAs;
- if(anAtr->IsKind(STANDARD_TYPE(StepRepr_ProductDefinitionShape)))
+ if (anAtr->IsKind(STANDARD_TYPE(StepRepr_ProductDefinitionShape)))
{
//if associating tolerances with part (All-Over)
Interface_EntityIterator anIterSDR = aGraph.Sharings(anAtr);
- for(anIterSDR.Start(); anIterSDR.More(); anIterSDR.Next())
+ for (anIterSDR.Start(); anIterSDR.More(); anIterSDR.Next())
{
Handle(Standard_Transient) anAtrSDR = anIterSDR.Value();
- if(anAtrSDR->IsKind(STANDARD_TYPE(StepShape_ShapeDefinitionRepresentation)))
+ if (anAtrSDR->IsKind(STANDARD_TYPE(StepShape_ShapeDefinitionRepresentation)))
{
isAllOver = Standard_True;
Interface_EntityIterator anIterABSR = aGraph.Shareds(anAtrSDR);
- for(anIterABSR.Start(); anIterABSR.More(); anIterABSR.Next())
+ for (anIterABSR.Start(); anIterABSR.More(); anIterABSR.Next())
{
Handle(Standard_Transient) anAtrABSR = anIterABSR.Value();
- if(anAtrABSR->IsKind(STANDARD_TYPE(StepShape_AdvancedBrepShapeRepresentation)))
+ if (anAtrABSR->IsKind(STANDARD_TYPE(StepShape_AdvancedBrepShapeRepresentation)))
{
aSeqRI1.Append(anAtrABSR);
}
}
}
}
- else if(anAtr->IsKind(STANDARD_TYPE(StepShape_DimensionalLocation)) ||
+ else if (anAtr->IsKind(STANDARD_TYPE(StepShape_DimensionalLocation)) ||
anAtr->IsKind(STANDARD_TYPE(StepShape_DimensionalSize)))
{
//if tolerance attached to dimension
Interface_EntityIterator anIterDim = aGraph.Shareds(anAtr);
- for(anIterDim.Start(); anIterDim.More(); anIterDim.Next())
+ for (anIterDim.Start(); anIterDim.More(); anIterDim.Next())
{
Handle(StepRepr_ShapeAspect) aSA = Handle(StepRepr_ShapeAspect)::DownCast(anIterDim.Value());
- if(!aSA.IsNull()) {
+ if (!aSA.IsNull()) {
collectShapeAspect(aSA, theWS, aSAs);
}
}
}
- else if(anAtr->IsKind(STANDARD_TYPE(StepRepr_ShapeAspect)))
+ else if (anAtr->IsKind(STANDARD_TYPE(StepRepr_ShapeAspect)))
{
- if(anAtr->IsKind(STANDARD_TYPE(StepRepr_AllAroundShapeAspect)))
+ if (anAtr->IsKind(STANDARD_TYPE(StepRepr_AllAroundShapeAspect)))
{
// if applyed AllAround Modifier
isAllAround = Standard_True;
}
// dimensions and default tolerances
Handle(StepRepr_ShapeAspect) aSA = Handle(StepRepr_ShapeAspect)::DownCast(anAtr);
- if(!aSA.IsNull()) {
+ if (!aSA.IsNull()) {
collectShapeAspect(aSA, theWS, aSAs);
}
}
// Collect all representation items
- if(!aSAs.IsEmpty())
+ if (!aSAs.IsEmpty())
{
//get representation items
NCollection_Sequence<Handle(Standard_Transient)> aSeqRI;
- for(Standard_Integer i = aSAs.Lower(); i <= aSAs.Upper(); i++)
+ for (Standard_Integer i = aSAs.Lower(); i <= aSAs.Upper(); i++)
{
Interface_EntityIterator anIterSA = aGraph.Sharings(aSAs.Value(i));
Handle(StepAP242_GeometricItemSpecificUsage) aGISU;
Handle(StepRepr_PropertyDefinition) PropD;
- for(anIterSA.Start(); anIterSA.More() && aGISU.IsNull() && PropD.IsNull(); anIterSA.Next()) {
+ for (anIterSA.Start(); anIterSA.More() && aGISU.IsNull() && PropD.IsNull(); anIterSA.Next()) {
aGISU = Handle(StepAP242_GeometricItemSpecificUsage)::DownCast(anIterSA.Value());
PropD = Handle(StepRepr_PropertyDefinition)::DownCast(anIterSA.Value());
}
- if(!PropD.IsNull())//for old version
+ if (!PropD.IsNull())//for old version
{
Handle(StepRepr_RepresentationItem) RI;
Interface_EntityIterator subs4 = aGraph.Sharings(PropD);
- for(subs4.Start(); subs4.More(); subs4.Next()) {
- Handle(StepShape_ShapeDefinitionRepresentation) SDR =
+ for (subs4.Start(); subs4.More(); subs4.Next()) {
+ Handle(StepShape_ShapeDefinitionRepresentation) SDR =
Handle(StepShape_ShapeDefinitionRepresentation)::DownCast(subs4.Value());
- if(!SDR.IsNull()) {
+ if (!SDR.IsNull()) {
Handle(StepRepr_Representation) Repr = SDR->UsedRepresentation();
- if( !Repr.IsNull() && Repr->NbItems()>0 ) {
+ if (!Repr.IsNull() && Repr->NbItems() > 0) {
RI = Repr->ItemsValue(1);
}
}
}
- if(RI.IsNull()) continue;
+ if (RI.IsNull()) continue;
- if(theEnt->IsKind(STANDARD_TYPE(StepShape_DimensionalSize))) {
+ if (theEnt->IsKind(STANDARD_TYPE(StepShape_DimensionalSize))) {
// read dimensions
Handle(StepShape_EdgeCurve) EC = Handle(StepShape_EdgeCurve)::DownCast(RI);
- if(EC.IsNull()) continue;
+ if (EC.IsNull()) continue;
Handle(TCollection_HAsciiString) aName;
- Handle(StepShape_DimensionalSize) DimSize =
+ Handle(StepShape_DimensionalSize) DimSize =
Handle(StepShape_DimensionalSize)::DownCast(theEnt);
- Standard_Real dim1=-1.,dim2=-1.;
+ Standard_Real dim1 = -1., dim2 = -1.;
subs4 = aGraph.Sharings(DimSize);
- for(subs4.Start(); subs4.More(); subs4.Next()) {
- Handle(StepShape_DimensionalCharacteristicRepresentation) DimCharR =
+ for (subs4.Start(); subs4.More(); subs4.Next()) {
+ Handle(StepShape_DimensionalCharacteristicRepresentation) DimCharR =
Handle(StepShape_DimensionalCharacteristicRepresentation)::DownCast(subs4.Value());
- if(!DimCharR.IsNull()) {
+ if (!DimCharR.IsNull()) {
Handle(StepShape_ShapeDimensionRepresentation) SDimR = DimCharR->Representation();
- if(!SDimR.IsNull() && SDimR->NbItems()>0) {
+ if (!SDimR.IsNull() && SDimR->NbItems() > 0) {
Handle(StepRepr_RepresentationItem) anItem = SDimR->ItemsValue(1);
Handle(StepRepr_ValueRange) VR = Handle(StepRepr_ValueRange)::DownCast(anItem);
- if(!VR.IsNull()) {
+ if (!VR.IsNull()) {
aName = VR->Name();
//StepRepr_CompoundItemDefinition CID = VR->ItemElement();
//if(CID.IsNull()) continue;
//if(CID.CaseMem(CIDM)==2)
// HARI = CID.SetRepresentationItem();
Handle(StepRepr_HArray1OfRepresentationItem) HARI = VR->ItemElement();
- if(HARI.IsNull()) continue;
- if(HARI->Length()>0) {
+ if (HARI.IsNull()) continue;
+ if (HARI->Length() > 0) {
Handle(StepRepr_RepresentationItem) RI1 = HARI->Value(1);
- if(RI1.IsNull()) continue;
- if(RI1->IsKind(STANDARD_TYPE(StepRepr_ReprItemAndLengthMeasureWithUnit))) {
+ if (RI1.IsNull()) continue;
+ if (RI1->IsKind(STANDARD_TYPE(StepRepr_ReprItemAndLengthMeasureWithUnit))) {
Handle(StepRepr_ReprItemAndLengthMeasureWithUnit) RILMWU =
Handle(StepRepr_ReprItemAndLengthMeasureWithUnit)::DownCast(RI1);
dim1 = RILMWU->GetMeasureWithUnit()->ValueComponent();
StepBasic_Unit anUnit = RILMWU->GetMeasureWithUnit()->UnitComponent();
- if(anUnit.IsNull()) continue;
- if( !(anUnit.CaseNum(anUnit.Value())==1) ) continue;
+ if (anUnit.IsNull()) continue;
+ if (!(anUnit.CaseNum(anUnit.Value()) == 1)) continue;
Handle(StepBasic_NamedUnit) NU = anUnit.NamedUnit();
STEPConstruct_UnitContext anUnitCtx;
anUnitCtx.ComputeFactors(NU);
dim1 = dim1 * anUnitCtx.LengthFactor();
}
}
- if(HARI->Length()>1) {
+ if (HARI->Length() > 1) {
Handle(StepRepr_RepresentationItem) RI2 = HARI->Value(2);
- if(RI2.IsNull()) continue;
- if(RI2->IsKind(STANDARD_TYPE(StepRepr_ReprItemAndLengthMeasureWithUnit))) {
+ if (RI2.IsNull()) continue;
+ if (RI2->IsKind(STANDARD_TYPE(StepRepr_ReprItemAndLengthMeasureWithUnit))) {
Handle(StepRepr_ReprItemAndLengthMeasureWithUnit) RILMWU =
Handle(StepRepr_ReprItemAndLengthMeasureWithUnit)::DownCast(RI2);
dim2 = RILMWU->GetMeasureWithUnit()->ValueComponent();
StepBasic_Unit anUnit = RILMWU->GetMeasureWithUnit()->UnitComponent();
- if(anUnit.IsNull()) continue;
- if( !(anUnit.CaseNum(anUnit.Value())==1) ) continue;
+ if (anUnit.IsNull()) continue;
+ if (!(anUnit.CaseNum(anUnit.Value()) == 1)) continue;
Handle(StepBasic_NamedUnit) NU = anUnit.NamedUnit();
STEPConstruct_UnitContext anUnitCtx;
anUnitCtx.ComputeFactors(NU);
}
}
}
- if(dim1<0) continue;
- if(dim2<0) dim2=dim1;
+ if (dim1 < 0) continue;
+ if (dim2 < 0) dim2 = dim1;
//cout<<"DimensionalSize: dim1="<<dim1<<" dim2="<<dim2<<endl;
// now we know edge_curve and value range therefore
// we can create corresponding D> labels
Standard_Integer index = aTP->MapIndex(EC);
TopoDS_Shape aSh;
- if(index >0) {
+ if (index > 0) {
Handle(Transfer_Binder) binder = aTP->MapItem(index);
aSh = TransferBRep::ShapeResult(binder);
}
- if(aSh.IsNull()) continue;
+ if (aSh.IsNull()) continue;
TDF_Label shL;
- if( !aSTool->Search(aSh, shL, Standard_True, Standard_True, Standard_True) ) continue;
- Handle(TColStd_HArray1OfReal) arr = new TColStd_HArray1OfReal(1,2);
- arr->SetValue(1,dim1);
- arr->SetValue(2,dim2);
- aDGTTool->SetDimTol(shL,1,arr,aName,DimSize->Name());
+ if (!aSTool->Search(aSh, shL, Standard_True, Standard_True, Standard_True)) continue;
+ Handle(TColStd_HArray1OfReal) arr = new TColStd_HArray1OfReal(1, 2);
+ arr->SetValue(1, dim1);
+ arr->SetValue(2, dim2);
+ aDGTTool->SetDimTol(shL, 1, arr, aName, DimSize->Name());
}
// read tolerances and datums
- else if(theEnt->IsKind(STANDARD_TYPE(StepDimTol_GeometricTolerance))) {
+ else if (theEnt->IsKind(STANDARD_TYPE(StepDimTol_GeometricTolerance))) {
Handle(StepDimTol_GeometricTolerance) GT =
Handle(StepDimTol_GeometricTolerance)::DownCast(theEnt);
// read common data for tolerance
//Standard_Real dim = GT->Magnitude()->ValueComponent();
- Handle (StepBasic_MeasureWithUnit) dim3 = GT->Magnitude();
- if(dim3.IsNull()) continue;
+ Handle(StepBasic_MeasureWithUnit) dim3 = GT->Magnitude();
+ if (dim3.IsNull()) continue;
Standard_Real dim = dim3->ValueComponent();
StepBasic_Unit anUnit = GT->Magnitude()->UnitComponent();
- if(anUnit.IsNull()) continue;
- if( !(anUnit.CaseNum(anUnit.Value())==1) ) continue;
+ if (anUnit.IsNull()) continue;
+ if (!(anUnit.CaseNum(anUnit.Value()) == 1)) continue;
Handle(StepBasic_NamedUnit) NU = anUnit.NamedUnit();
STEPConstruct_UnitContext anUnitCtx;
anUnitCtx.ComputeFactors(NU);
dim = dim * anUnitCtx.LengthFactor();
//cout<<"GeometricTolerance: Magnitude = "<<dim<<endl;
- Handle(TColStd_HArray1OfReal) arr = new TColStd_HArray1OfReal(1,1);
- arr->SetValue(1,dim);
+ Handle(TColStd_HArray1OfReal) arr = new TColStd_HArray1OfReal(1, 1);
+ arr->SetValue(1, dim);
Handle(TCollection_HAsciiString) aName = GT->Name();
Handle(TCollection_HAsciiString) aDescription = GT->Description();
Handle(StepShape_AdvancedFace) AF = Handle(StepShape_AdvancedFace)::DownCast(RI);
- if(AF.IsNull()) continue;
+ if (AF.IsNull()) continue;
Standard_Integer index = aTP->MapIndex(AF);
TopoDS_Shape aSh;
- if(index >0) {
+ if (index > 0) {
Handle(Transfer_Binder) binder = aTP->MapItem(index);
aSh = TransferBRep::ShapeResult(binder);
}
- if(aSh.IsNull()) continue;
+ if (aSh.IsNull()) continue;
TDF_Label shL;
- if( !aSTool->Search(aSh, shL, Standard_True, Standard_True, Standard_True) ) continue;
+ if (!aSTool->Search(aSh, shL, Standard_True, Standard_True, Standard_True)) continue;
// read specific data for tolerance
- if(GT->IsKind(STANDARD_TYPE(StepDimTol_GeoTolAndGeoTolWthDatRefAndModGeoTolAndPosTol))) {
+ if (GT->IsKind(STANDARD_TYPE(StepDimTol_GeoTolAndGeoTolWthDatRefAndModGeoTolAndPosTol))) {
Handle(StepDimTol_GeoTolAndGeoTolWthDatRefAndModGeoTolAndPosTol) GTComplex =
Handle(StepDimTol_GeoTolAndGeoTolWthDatRefAndModGeoTolAndPosTol)::DownCast(theEnt);
- Standard_Integer kind=20;
- Handle(StepDimTol_ModifiedGeometricTolerance) MGT =
+ Standard_Integer kind = 20;
+ Handle(StepDimTol_ModifiedGeometricTolerance) MGT =
GTComplex->GetModifiedGeometricTolerance();
- if(!MGT.IsNull()) {
- kind = kind + MGT->Modifier()+1;
+ if (!MGT.IsNull()) {
+ kind = kind + MGT->Modifier() + 1;
}
- TDF_Label TolerL = aDGTTool->SetDimTol(shL,kind,arr,aName,aDescription);
+ TDF_Label TolerL = aDGTTool->SetDimTol(shL, kind, arr, aName, aDescription);
// translate datums connected with this tolerance
Handle(StepDimTol_GeometricToleranceWithDatumReference) GTWDR =
GTComplex->GetGeometricToleranceWithDatumReference();
- if(!GTWDR.IsNull()) {
- ReadDatums(aSTool,aDGTTool,aGraph,aTP,TolerL,GTWDR);
+ if (!GTWDR.IsNull()) {
+ ReadDatums(aSTool, aDGTTool, aGraph, aTP, TolerL, GTWDR);
}
}
- else if(GT->IsKind(STANDARD_TYPE(StepDimTol_GeometricToleranceWithDatumReference))) {
+ else if (GT->IsKind(STANDARD_TYPE(StepDimTol_GeometricToleranceWithDatumReference))) {
Handle(StepDimTol_GeometricToleranceWithDatumReference) GTWDR =
Handle(StepDimTol_GeometricToleranceWithDatumReference)::DownCast(theEnt);
- if(GTWDR.IsNull()) continue;
+ if (GTWDR.IsNull()) continue;
Standard_Integer kind = 0;
- if (GTWDR->IsKind(STANDARD_TYPE(StepDimTol_AngularityTolerance))) kind = 24;
- else if(GTWDR->IsKind(STANDARD_TYPE(StepDimTol_CircularRunoutTolerance))) kind = 25;
- else if(GTWDR->IsKind(STANDARD_TYPE(StepDimTol_CoaxialityTolerance))) kind = 26;
- else if(GTWDR->IsKind(STANDARD_TYPE(StepDimTol_ConcentricityTolerance))) kind = 27;
- else if(GTWDR->IsKind(STANDARD_TYPE(StepDimTol_ParallelismTolerance))) kind = 28;
- else if(GTWDR->IsKind(STANDARD_TYPE(StepDimTol_PerpendicularityTolerance))) kind = 29;
- else if(GTWDR->IsKind(STANDARD_TYPE(StepDimTol_SymmetryTolerance))) kind = 30;
- else if(GTWDR->IsKind(STANDARD_TYPE(StepDimTol_TotalRunoutTolerance))) kind = 31;
+ if (GTWDR->IsKind(STANDARD_TYPE(StepDimTol_AngularityTolerance))) kind = 24;
+ else if (GTWDR->IsKind(STANDARD_TYPE(StepDimTol_CircularRunoutTolerance))) kind = 25;
+ else if (GTWDR->IsKind(STANDARD_TYPE(StepDimTol_CoaxialityTolerance))) kind = 26;
+ else if (GTWDR->IsKind(STANDARD_TYPE(StepDimTol_ConcentricityTolerance))) kind = 27;
+ else if (GTWDR->IsKind(STANDARD_TYPE(StepDimTol_ParallelismTolerance))) kind = 28;
+ else if (GTWDR->IsKind(STANDARD_TYPE(StepDimTol_PerpendicularityTolerance))) kind = 29;
+ else if (GTWDR->IsKind(STANDARD_TYPE(StepDimTol_SymmetryTolerance))) kind = 30;
+ else if (GTWDR->IsKind(STANDARD_TYPE(StepDimTol_TotalRunoutTolerance))) kind = 31;
//cout<<"GTWDR: kind="<<kind<<endl;
- TDF_Label TolerL = aDGTTool->SetDimTol(shL,kind,arr,aName,aDescription);
- ReadDatums(aSTool,aDGTTool,aGraph,aTP,TolerL,GTWDR);
+ TDF_Label TolerL = aDGTTool->SetDimTol(shL, kind, arr, aName, aDescription);
+ ReadDatums(aSTool, aDGTTool, aGraph, aTP, TolerL, GTWDR);
}
- else if(GT->IsKind(STANDARD_TYPE(StepDimTol_ModifiedGeometricTolerance))) {
+ else if (GT->IsKind(STANDARD_TYPE(StepDimTol_ModifiedGeometricTolerance))) {
Handle(StepDimTol_ModifiedGeometricTolerance) MGT =
Handle(StepDimTol_ModifiedGeometricTolerance)::DownCast(theEnt);
Standard_Integer kind = 35 + MGT->Modifier();
- aDGTTool->SetDimTol(shL,kind,arr,aName,aDescription);
+ aDGTTool->SetDimTol(shL, kind, arr, aName, aDescription);
}
- else if(GT->IsKind(STANDARD_TYPE(StepDimTol_CylindricityTolerance))) {
- aDGTTool->SetDimTol(shL,38,arr,aName,aDescription);
+ else if (GT->IsKind(STANDARD_TYPE(StepDimTol_CylindricityTolerance))) {
+ aDGTTool->SetDimTol(shL, 38, arr, aName, aDescription);
}
- else if(GT->IsKind(STANDARD_TYPE(StepDimTol_FlatnessTolerance))) {
- aDGTTool->SetDimTol(shL,39,arr,aName,aDescription);
+ else if (GT->IsKind(STANDARD_TYPE(StepDimTol_FlatnessTolerance))) {
+ aDGTTool->SetDimTol(shL, 39, arr, aName, aDescription);
}
- else if(GT->IsKind(STANDARD_TYPE(StepDimTol_LineProfileTolerance))) {
- aDGTTool->SetDimTol(shL,40,arr,aName,aDescription);
+ else if (GT->IsKind(STANDARD_TYPE(StepDimTol_LineProfileTolerance))) {
+ aDGTTool->SetDimTol(shL, 40, arr, aName, aDescription);
}
- else if(GT->IsKind(STANDARD_TYPE(StepDimTol_PositionTolerance))) {
- aDGTTool->SetDimTol(shL,41,arr,aName,aDescription);
+ else if (GT->IsKind(STANDARD_TYPE(StepDimTol_PositionTolerance))) {
+ aDGTTool->SetDimTol(shL, 41, arr, aName, aDescription);
}
- else if(GT->IsKind(STANDARD_TYPE(StepDimTol_RoundnessTolerance))) {
- aDGTTool->SetDimTol(shL,42,arr,aName,aDescription);
+ else if (GT->IsKind(STANDARD_TYPE(StepDimTol_RoundnessTolerance))) {
+ aDGTTool->SetDimTol(shL, 42, arr, aName, aDescription);
}
- else if(GT->IsKind(STANDARD_TYPE(StepDimTol_StraightnessTolerance))) {
- aDGTTool->SetDimTol(shL,43,arr,aName,aDescription);
+ else if (GT->IsKind(STANDARD_TYPE(StepDimTol_StraightnessTolerance))) {
+ aDGTTool->SetDimTol(shL, 43, arr, aName, aDescription);
}
- else if(GT->IsKind(STANDARD_TYPE(StepDimTol_SurfaceProfileTolerance))) {
- aDGTTool->SetDimTol(shL,44,arr,aName,aDescription);
+ else if (GT->IsKind(STANDARD_TYPE(StepDimTol_SurfaceProfileTolerance))) {
+ aDGTTool->SetDimTol(shL, 44, arr, aName, aDescription);
}
}
}
else
{
- if(aGISU.IsNull()) continue;
- Standard_Integer j =1;
- for ( ; j <= aGISU->NbIdentifiedItem(); j++) {
+ if (aGISU.IsNull()) continue;
+ Standard_Integer j = 1;
+ for (; j <= aGISU->NbIdentifiedItem(); j++) {
aSeqRI.Append(aGISU->IdentifiedItemValue(j));
}
}
}
- if(!aSeqRI.IsEmpty())
+ if (!aSeqRI.IsEmpty())
{
- if(aSeqRI1.IsEmpty())
+ if (aSeqRI1.IsEmpty())
aSeqRI1 = aSeqRI;
- else
+ else
aSeqRI2 = aSeqRI;
}
}
}
- if(aSeqRI1.IsEmpty())
+ if (aSeqRI1.IsEmpty())
return aGDTL;
TDF_LabelSequence aShLS1, aShLS2;
// Collect shapes
- for(Standard_Integer i = aSeqRI1.Lower(); i <= aSeqRI1.Upper() ;i++)
+ for (Standard_Integer i = aSeqRI1.Lower(); i <= aSeqRI1.Upper();i++)
{
Standard_Integer anIndex = FindShapeIndexForDGT(aSeqRI1.Value(i), theWS);
TopoDS_Shape aSh;
- if(anIndex > 0) {
+ if (anIndex > 0) {
Handle(Transfer_Binder) aBinder = aTP->MapItem(anIndex);
aSh = TransferBRep::ShapeResult(aBinder);
}
- if(!aSh.IsNull())
+ if (!aSh.IsNull())
{
TDF_Label aShL;
aSTool->Search(aSh, aShL, Standard_True, Standard_True, Standard_True);
if (!aSeqRI2.IsEmpty())
{
//for dimensional location
- for(Standard_Integer i = aSeqRI2.Lower(); i <= aSeqRI2.Upper() ;i++)
+ for (Standard_Integer i = aSeqRI2.Lower(); i <= aSeqRI2.Upper();i++)
{
Standard_Integer anIndex = FindShapeIndexForDGT(aSeqRI2.Value(i), theWS);
TopoDS_Shape aSh;
- if(anIndex >0) {
+ if (anIndex > 0) {
Handle(Transfer_Binder) aBinder = aTP->MapItem(anIndex);
aSh = TransferBRep::ShapeResult(aBinder);
}
- if(!aSh.IsNull())
+ if (!aSh.IsNull())
{
TDF_Label aShL;
aSTool->Search(aSh, aShL, Standard_True, Standard_True, Standard_True);
}
}
- if(!aShLS1.IsEmpty())
+ if (!aShLS1.IsEmpty())
{
// add to XCAF
- if(!theEnt->IsKind(STANDARD_TYPE(StepDimTol_GeometricTolerance)))
+ if (!theEnt->IsKind(STANDARD_TYPE(StepDimTol_GeometricTolerance)))
{
aGDTL = aDGTTool->AddDimension();
myGDTMap.Bind(theEnt, aGDTL);
aDGTTool->Lock(aGDTL);
Handle(XCAFDoc_Dimension) aDim = XCAFDoc_Dimension::Set(aGDTL);
TCollection_AsciiString aStr("DGT:Dimensional_");
- if(theEnt->IsKind(STANDARD_TYPE(StepShape_DimensionalSize)))
+ if (theEnt->IsKind(STANDARD_TYPE(StepShape_DimensionalSize)))
{
aStr.AssignCat("Size");
}
- else if(theEnt->IsKind(STANDARD_TYPE(StepShape_DimensionalLocation)))
+ else if (theEnt->IsKind(STANDARD_TYPE(StepShape_DimensionalLocation)))
{
aStr.AssignCat("Location");
}
TDataStd_Name::Set(aGDTL, aStr);
- if(!aShLS2.IsEmpty())
+ if (!aShLS2.IsEmpty())
{
aDGTTool->SetDimension(aShLS1, aShLS2, aGDTL);
}
TDataStd_Name::Set(aGDTL, aStr);
aDGTTool->SetGeomTolerance(aShLS1, aGDTL);
Handle(XCAFDimTolObjects_GeomToleranceObject) anObj = aGTol->GetObject();
- if(isAllAround)
+ if (isAllAround)
anObj->AddModifier(XCAFDimTolObjects_GeomToleranceModif_All_Around);
- else if(isAllOver)
+ else if (isAllOver)
anObj->AddModifier(XCAFDimTolObjects_GeomToleranceModif_All_Over);
aGTol->SetObject(anObj);
}
//purpose :
//=======================================================================
static void setDimObjectToXCAF(const Handle(Standard_Transient)& theEnt,
- const TDF_Label& aDimL,
- const Handle(TDocStd_Document)& theDoc,
- const Handle(XSControl_WorkSession)& theWS)
+ const TDF_Label& aDimL,
+ const Handle(TDocStd_Document)& theDoc,
+ const Handle(XSControl_WorkSession)& theWS)
{
- Handle(XCAFDoc_ShapeTool) aSTool = XCAFDoc_DocumentTool::ShapeTool( theDoc->Main() );
- Handle(XCAFDoc_DimTolTool) aDGTTool = XCAFDoc_DocumentTool::DimTolTool( theDoc->Main() );
+ Handle(XCAFDoc_ShapeTool) aSTool = XCAFDoc_DocumentTool::ShapeTool(theDoc->Main());
+ Handle(XCAFDoc_DimTolTool) aDGTTool = XCAFDoc_DocumentTool::DimTolTool(theDoc->Main());
const Handle(XSControl_TransferReader) &aTR = theWS->TransferReader();
const Handle(Transfer_TransientProcess) &aTP = aTR->TransientProcess();
const Interface_Graph& aGraph = aTP->Graph();
Handle(XCAFDimTolObjects_DimensionObject) aDimObj;
- if(!theEnt->IsKind(STANDARD_TYPE(StepShape_DimensionalSize)) &&
- !theEnt->IsKind(STANDARD_TYPE(StepShape_DimensionalLocation)))
+ if (!theEnt->IsKind(STANDARD_TYPE(StepShape_DimensionalSize)) &&
+ !theEnt->IsKind(STANDARD_TYPE(StepShape_DimensionalLocation)))
return;
- Handle(StepShape_DimensionalSize) aDimSize =
+ Handle(StepShape_DimensionalSize) aDimSize =
Handle(StepShape_DimensionalSize)::DownCast(theEnt);
- Handle(StepShape_DimensionalLocation) aDimLocation =
+ Handle(StepShape_DimensionalLocation) aDimLocation =
Handle(StepShape_DimensionalLocation)::DownCast(theEnt);
aDimObj = new XCAFDimTolObjects_DimensionObject();
- Standard_Real aDim1=-1.,aDim2=-1.,aDim3=-1.;
+ Standard_Real aDim1 = -1., aDim2 = -1., aDim3 = -1.;
Standard_Boolean isPlusMinusTolerance = Standard_False;
Handle(StepShape_TypeQualifier) aTQ;
Handle(StepShape_ValueFormatTypeQualifier) aVFTQ;
Handle(StepGeom_Axis2Placement3d) anAP;
Interface_EntityIterator anIterDim;
- if(!aDimSize.IsNull())
+ if (!aDimSize.IsNull())
{
anIterDim = aGraph.Sharings(aDimSize);
}
{
anIterDim = aGraph.Sharings(aDimLocation);
}
- for(anIterDim.Start(); anIterDim.More(); anIterDim.Next()) {
- Handle(StepShape_DimensionalCharacteristicRepresentation) aDCR =
+ for (anIterDim.Start(); anIterDim.More(); anIterDim.Next()) {
+ Handle(StepShape_DimensionalCharacteristicRepresentation) aDCR =
Handle(StepShape_DimensionalCharacteristicRepresentation)::DownCast(anIterDim.Value());
- Handle(StepShape_PlusMinusTolerance) aPMT =
+ Handle(StepShape_PlusMinusTolerance) aPMT =
Handle(StepShape_PlusMinusTolerance)::DownCast(anIterDim.Value());
- if(!aDCR.IsNull()) {
+ if (!aDCR.IsNull()) {
Handle(StepShape_ShapeDimensionRepresentation) aSDR = aDCR->Representation();
- if(!aSDR.IsNull()) {
+ if (!aSDR.IsNull()) {
Handle(StepRepr_HArray1OfRepresentationItem) aHARI = aSDR->Items();
- if(!aHARI.IsNull())
+ if (!aHARI.IsNull())
{
- for(Standard_Integer nr = aHARI->Lower(); nr <= aHARI->Upper(); nr++)
+ for (Standard_Integer nr = aHARI->Lower(); nr <= aHARI->Upper(); nr++)
{
Handle(StepRepr_RepresentationItem) aDRI = aHARI->Value(nr);
- if(aDRI.IsNull()) continue;
+ if (aDRI.IsNull()) continue;
if (aDRI->IsKind(STANDARD_TYPE(StepRepr_ReprItemAndMeasureWithUnit))) {
// simple value / range
Handle(StepRepr_ReprItemAndMeasureWithUnit)::DownCast(aDRI);
Standard_Real aVal = aMWU->GetMeasureWithUnit()->ValueComponent();
StepBasic_Unit anUnit = aMWU->GetMeasureWithUnit()->UnitComponent();
- if (anUnit.IsNull())
+ if (anUnit.IsNull())
continue;
- if (!(anUnit.CaseNum(anUnit.Value()) == 1))
+ if (!(anUnit.CaseNum(anUnit.Value()) == 1))
continue;
Handle(StepBasic_NamedUnit) NU = anUnit.NamedUnit();
STEPConstruct_UnitContext anUnitCtx;
anUnitCtx.ComputeFactors(NU);
if (aMWU->IsKind(STANDARD_TYPE(StepRepr_ReprItemAndLengthMeasureWithUnit))) {
aVal = aVal * anUnitCtx.LengthFactor();
+
}
else
if (aMWU->IsKind(STANDARD_TYPE(StepRepr_ReprItemAndPlaneAngleMeasureWithUnit))) {
Handle(StepRepr_ReprItemAndMeasureWithUnitAndQRI)::DownCast(aDRI);
Standard_Real aVal = aMWU->GetMeasureWithUnit()->ValueComponent();
StepBasic_Unit anUnit = aMWU->GetMeasureWithUnit()->UnitComponent();
- if(anUnit.IsNull())
+ if (anUnit.IsNull())
continue;
- if( !(anUnit.CaseNum(anUnit.Value()) == 1) )
+ if (!(anUnit.CaseNum(anUnit.Value()) == 1))
continue;
Handle(StepBasic_NamedUnit) NU = anUnit.NamedUnit();
STEPConstruct_UnitContext anUnitCtx;
aDim3 = aVal;
else aDim1 = aVal;
}
- else if(aDRI->IsKind(STANDARD_TYPE(StepShape_QualifiedRepresentationItem))) {
+ else if (aDRI->IsKind(STANDARD_TYPE(StepShape_QualifiedRepresentationItem))) {
//get qualifier
Handle(StepShape_QualifiedRepresentationItem) aQRI =
Handle(StepShape_QualifiedRepresentationItem)::DownCast(aDRI);
- for(Standard_Integer l = 1; l <= aQRI->NbQualifiers(); l++)
+ for (Standard_Integer l = 1; l <= aQRI->NbQualifiers(); l++)
{
aTQ = aQRI->Qualifiers()->Value(l).TypeQualifier();
aVFTQ = aQRI->Qualifiers()->Value(l).ValueFormatTypeQualifier();
Handle(StepRepr_DescriptiveRepresentationItem)::DownCast(aDRI);
aDimObj->AddDescription(aDescription->Description(), aDescription->Name());
}
- else if(aDRI->IsKind(STANDARD_TYPE(StepRepr_CompoundRepresentationItem))) {
+ else if (aDRI->IsKind(STANDARD_TYPE(StepRepr_CompoundRepresentationItem))) {
aCRI = Handle(StepRepr_CompoundRepresentationItem)::DownCast(aDRI);
}
- else if(aDRI->IsKind(STANDARD_TYPE(StepGeom_Axis2Placement3d)))
+ else if (aDRI->IsKind(STANDARD_TYPE(StepGeom_Axis2Placement3d)))
{
anAP = Handle(StepGeom_Axis2Placement3d)::DownCast(aDRI);
}
{
isPlusMinusTolerance = Standard_True;
StepShape_ToleranceMethodDefinition aTMD = aPMT->Range();
- if(aPMT.IsNull()) continue;
- if(aTMD.CaseNumber() == 1)
+ if (aPMT.IsNull()) continue;
+ if (aTMD.CaseNumber() == 1)
//! 1 -> ToleranceValue from StepShape
//! 2 -> LimitsAndFits from StepShape
{
Handle(StepBasic_MeasureWithUnit) aMWU = aTV->UpperBound();
Standard_Real aVal = aTV->UpperBound()->ValueComponent();
StepBasic_Unit anUnit = aTV->UpperBound()->UnitComponent();
- if(anUnit.IsNull()) continue;
- if( !(anUnit.CaseNum(anUnit.Value())==1) ) continue;
+ if (anUnit.IsNull()) continue;
+ if (!(anUnit.CaseNum(anUnit.Value()) == 1)) continue;
Handle(StepBasic_NamedUnit) NU = anUnit.NamedUnit();
STEPConstruct_UnitContext anUnitCtx;
anUnitCtx.ComputeFactors(NU);
aMWU = aTV->LowerBound();
aVal = aTV->LowerBound()->ValueComponent();
anUnit = aTV->LowerBound()->UnitComponent();
- if(anUnit.IsNull()) continue;
- if( !(anUnit.CaseNum(anUnit.Value())==1) ) continue;
+ if (anUnit.IsNull()) continue;
+ if (!(anUnit.CaseNum(anUnit.Value()) == 1)) continue;
NU = anUnit.NamedUnit();
anUnitCtx.ComputeFactors(NU);
if (aMWU->IsKind(STANDARD_TYPE(StepBasic_LengthMeasureWithUnit)) ||
}
}
- if(aDim1<0) return;
+ if (aDim1 < 0) return;
- if(aDim2 < 0)
+ if (aDim2 < 0)
aDimObj->SetValue(aDim1);
else if (aDim3 < 0)
{
- Handle(TColStd_HArray1OfReal) anArr = new TColStd_HArray1OfReal(1,2);
- anArr->SetValue(1,aDim1);
- anArr->SetValue(2,aDim2);
+ Handle(TColStd_HArray1OfReal) anArr = new TColStd_HArray1OfReal(1, 2);
+ anArr->SetValue(1, aDim1);
+ anArr->SetValue(2, aDim2);
aDimObj->SetValues(anArr);
}
else
{
- Handle(TColStd_HArray1OfReal) anArr = new TColStd_HArray1OfReal(1,3);
+ Handle(TColStd_HArray1OfReal) anArr = new TColStd_HArray1OfReal(1, 3);
if (!isPlusMinusTolerance)
{
aDim2 = aDim1 - aDim2;
aDim3 = aDim3 - aDim1;
}
- anArr->SetValue(1,aDim1);
- anArr->SetValue(2,aDim2);
- anArr->SetValue(3,aDim3);
+ anArr->SetValue(1, aDim1);
+ anArr->SetValue(2, aDim2);
+ anArr->SetValue(3, aDim3);
aDimObj->SetValues(anArr);
}
- if(!aTQ.IsNull())
+ if (!aTQ.IsNull())
{
XCAFDimTolObjects_DimensionQualifier aQ;
if (STEPCAFControl_GDTProperty::GetDimQualifierType(aTQ->Name(), aQ))
{
- aDimObj->SetQualifier(aQ);
+ aDimObj->SetQualifier(aQ);
}
}
{
//A typical value would be 'NR2 2.2'
TCollection_HAsciiString aFormat = aVFTQ->FormatType();
- Standard_Integer i = aFormat.Location(1,' ',1,aFormat.Length());
- aFormat.SubString(i+1,i+1)->IntegerValue();
- aDimObj->SetNbOfDecimalPlaces(aFormat.SubString(i+1,i+1)->IntegerValue(),
- aFormat.SubString(i+3,i+3)->IntegerValue());
+ Standard_Integer i = aFormat.Location(1, ' ', 1, aFormat.Length());
+ aFormat.SubString(i + 1, i + 1)->IntegerValue();
+ aDimObj->SetNbOfDecimalPlaces(aFormat.SubString(i + 1, i + 1)->IntegerValue(),
+ aFormat.SubString(i + 3, i + 3)->IntegerValue());
}
if (!aLAF.IsNull())
- {
+ {
//get class of tolerance
Standard_Boolean aHolle = Standard_False;
XCAFDimTolObjects_DimensionFormVariance aFV = XCAFDimTolObjects_DimensionFormVariance_None;
//get modifiers
XCAFDimTolObjects_DimensionModifiersSequence aModifiers;
STEPCAFControl_GDTProperty::GetDimModifiers(aCRI, aModifiers);
- if(aModifiers.Length() > 0)
+ if (aModifiers.Length() > 0)
aDimObj->SetModifiers(aModifiers);
}
Handle(TCollection_HAsciiString) aName;
- if(!aDimSize.IsNull())
+ if (!aDimSize.IsNull())
{
aName = aDimSize->Name();
}
XCAFDimTolObjects_DimensionType aType = XCAFDimTolObjects_DimensionType_Location_None;
if (!STEPCAFControl_GDTProperty::GetDimType(aName, aType))
{
- if(!aDimSize.IsNull())
+ if (!aDimSize.IsNull())
{
- Handle(StepShape_AngularSize) anAngSize=
+ Handle(StepShape_AngularSize) anAngSize =
Handle(StepShape_AngularSize)::DownCast(aDimSize);
- if(!anAngSize.IsNull())
+ if (!anAngSize.IsNull())
{
//get qualifier for angular value
aType = XCAFDimTolObjects_DimensionType_Size_Angular;
- if(anAngSize->AngleSelection() == StepShape_Equal)
+ if (anAngSize->AngleSelection() == StepShape_Equal)
aDimObj->SetQualifier(XCAFDimTolObjects_DimensionQualifier_Avg);
else if (anAngSize->AngleSelection() == StepShape_Large)
aDimObj->SetQualifier(XCAFDimTolObjects_DimensionQualifier_Max);
}
else
{
- Handle(StepShape_AngularLocation) anAngLoc=
+ Handle(StepShape_AngularLocation) anAngLoc =
Handle(StepShape_AngularLocation)::DownCast(aDimLocation);
- if(!anAngLoc.IsNull())
+ if (!anAngLoc.IsNull())
{
//get qualifier for angular value
aType = XCAFDimTolObjects_DimensionType_Location_Angular;
- if(anAngLoc->AngleSelection() == StepShape_Equal)
+ if (anAngLoc->AngleSelection() == StepShape_Equal)
aDimObj->SetQualifier(XCAFDimTolObjects_DimensionQualifier_Avg);
else if (anAngLoc->AngleSelection() == StepShape_Large)
aDimObj->SetQualifier(XCAFDimTolObjects_DimensionQualifier_Max);
aDimObj->SetQualifier(XCAFDimTolObjects_DimensionQualifier_Min);
}
}
- if(aType == XCAFDimTolObjects_DimensionType_Location_None)
+ if (aType == XCAFDimTolObjects_DimensionType_Location_None)
{
Handle(StepRepr_ShapeAspect) aPSA;
- if(!aDimSize.IsNull())
+ if (!aDimSize.IsNull())
{
- Handle(StepShape_DimensionalSizeWithPath) aDimSizeWithPath=
+ Handle(StepShape_DimensionalSizeWithPath) aDimSizeWithPath =
Handle(StepShape_DimensionalSizeWithPath)::DownCast(aDimSize);
if (!aDimSizeWithPath.IsNull())
{
}
else
{
- Handle(StepShape_DimensionalLocationWithPath) aDimLocWithPath=
+ Handle(StepShape_DimensionalLocationWithPath) aDimLocWithPath =
Handle(StepShape_DimensionalLocationWithPath)::DownCast(aDimLocation);
if (!aDimLocWithPath.IsNull())
{
}
}
- if(!aPSA.IsNull())
+ if (!aPSA.IsNull())
{
//for DimensionalLocationWithPath
Handle(StepGeom_GeometricRepresentationItem) aGRI;
Handle(StepAP242_GeometricItemSpecificUsage) aPGISU;
Interface_EntityIterator anIterDSWP = aGraph.Sharings(aPSA);
- for(anIterDSWP.Start(); anIterDSWP.More() && aPGISU.IsNull(); anIterDSWP.Next()) {
+ for (anIterDSWP.Start(); anIterDSWP.More() && aPGISU.IsNull(); anIterDSWP.Next()) {
aPGISU = Handle(StepAP242_GeometricItemSpecificUsage)::DownCast(anIterDSWP.Value());
}
- if(aPGISU.IsNull()) return;
- if(aPGISU->NbIdentifiedItem() > 0) {
+ if (aPGISU.IsNull()) return;
+ if (aPGISU->NbIdentifiedItem() > 0) {
aGRI = Handle(StepGeom_GeometricRepresentationItem)::DownCast(aPGISU->IdentifiedItemValue(1));
}
- if(aGRI.IsNull()) return;
+ if (aGRI.IsNull()) return;
Handle(StepRepr_RepresentationItem) aPRI;
Interface_EntityIterator anIterGRI = aGraph.Sharings(aGRI);
- for(anIterGRI.Start(); anIterGRI.More() && aPGISU.IsNull(); anIterGRI.Next()) {
+ for (anIterGRI.Start(); anIterGRI.More() && aPGISU.IsNull(); anIterGRI.Next()) {
aPRI = Handle(StepRepr_RepresentationItem)::DownCast(anIterGRI.Value());
}
Standard_Integer anIndex = FindShapeIndexForDGT(aPRI, theWS);
TopoDS_Edge aSh;
- if(anIndex >0) {
+ if (anIndex > 0) {
Handle(Transfer_Binder) aBinder = aTP->MapItem(anIndex);
aSh = TopoDS::Edge(TransferBRep::ShapeResult(aBinder));
}
- if(aSh.IsNull()) return;
+ if (aSh.IsNull()) return;
aDimObj->SetPath(aSh);
}
- else if(!anAP.IsNull())
+ else if (!anAP.IsNull())
{
- if(anAP->Name()->String().IsEqual("orientation") && !anAP->Axis().IsNull())
+ if (anAP->Name()->String().IsEqual("orientation") && !anAP->Axis().IsNull())
{
//for Oriented Dimensional Location
Handle(TColStd_HArray1OfReal) aDirArr = anAP->RefDirection()->DirectionRatios();
gp_Dir aDir;
- if(!aDirArr.IsNull() && aDirArr->Length() > 2)
+ if (!aDirArr.IsNull() && aDirArr->Length() > 2)
{
- aDir.SetCoord(aDirArr->Lower(), aDirArr->Lower()+1, aDirArr->Lower()+2);
+ aDir.SetCoord(aDirArr->Lower(), aDirArr->Lower() + 1, aDirArr->Lower() + 2);
aDimObj->SetDirection(aDir);
}
- else if(aDirArr->Length() > 1)
+ else if (aDirArr->Length() > 1)
{
- aDir.SetCoord(aDirArr->Lower(), aDirArr->Lower()+1, 0);
+ aDir.SetCoord(aDirArr->Lower(), aDirArr->Lower() + 1, 0);
aDimObj->SetDirection(aDir);
}
}
}
aDimObj->SetType(aType);
-
- if(!aDimObj.IsNull())
+
+ if (!aDimObj.IsNull())
{
Handle(XCAFDoc_Dimension) aDim;
- if(aDimL.FindAttribute(XCAFDoc_Dimension::GetID(),aDim))
+ if (aDimL.FindAttribute(XCAFDoc_Dimension::GetID(), aDim))
{
readAnnotation(aTR, theEnt, aDimObj);
readConnectionPoints(aTR, theEnt, aDimObj);
//purpose :
//=======================================================================
static Standard_Boolean getTolType(const Handle(Standard_Transient)& theEnt,
- XCAFDimTolObjects_GeomToleranceType& theType)
+ XCAFDimTolObjects_GeomToleranceType& theType)
{
- if(theEnt.IsNull() || !theEnt->IsKind(STANDARD_TYPE(StepDimTol_GeometricTolerance)))
+ if (theEnt.IsNull() || !theEnt->IsKind(STANDARD_TYPE(StepDimTol_GeometricTolerance)))
return Standard_False;
theType = XCAFDimTolObjects_GeomToleranceType_None;
if (theEnt->IsKind(STANDARD_TYPE(StepDimTol_GeoTolAndGeoTolWthDatRef)))
}
else if (theEnt->IsKind(STANDARD_TYPE(StepDimTol_GeoTolAndGeoTolWthDatRefAndGeoTolWthMaxTol)))
{
- Handle(StepDimTol_GeoTolAndGeoTolWthDatRefAndGeoTolWthMaxTol) anE =
+ Handle(StepDimTol_GeoTolAndGeoTolWthDatRefAndGeoTolWthMaxTol) anE =
Handle(StepDimTol_GeoTolAndGeoTolWthDatRefAndGeoTolWthMaxTol)::DownCast(theEnt);
theType = STEPCAFControl_GDTProperty::GetGeomToleranceType(anE->GetToleranceType());
}
else if (theEnt->IsKind(STANDARD_TYPE(StepDimTol_GeoTolAndGeoTolWthDatRefAndGeoTolWthMod)))
{
- Handle(StepDimTol_GeoTolAndGeoTolWthDatRefAndGeoTolWthMod) anE =
+ Handle(StepDimTol_GeoTolAndGeoTolWthDatRefAndGeoTolWthMod) anE =
Handle(StepDimTol_GeoTolAndGeoTolWthDatRefAndGeoTolWthMod)::DownCast(theEnt);
theType = STEPCAFControl_GDTProperty::GetGeomToleranceType(anE->GetToleranceType());
}
else if (theEnt->IsKind(STANDARD_TYPE(StepDimTol_GeoTolAndGeoTolWthMaxTol)))
{
- Handle(StepDimTol_GeoTolAndGeoTolWthMaxTol) anE =
+ Handle(StepDimTol_GeoTolAndGeoTolWthMaxTol) anE =
Handle(StepDimTol_GeoTolAndGeoTolWthMaxTol)::DownCast(theEnt);
theType = STEPCAFControl_GDTProperty::GetGeomToleranceType(anE->GetToleranceType());
}
else if (theEnt->IsKind(STANDARD_TYPE(StepDimTol_GeoTolAndGeoTolWthMod)))
{
- Handle(StepDimTol_GeoTolAndGeoTolWthMod) anE =
+ Handle(StepDimTol_GeoTolAndGeoTolWthMod) anE =
Handle(StepDimTol_GeoTolAndGeoTolWthMod)::DownCast(theEnt);
theType = STEPCAFControl_GDTProperty::GetGeomToleranceType(anE->GetToleranceType());
}
else if (theEnt->IsKind(STANDARD_TYPE(StepDimTol_GeoTolAndGeoTolWthDatRefAndUneqDisGeoTol)))
{
- Handle(StepDimTol_GeoTolAndGeoTolWthDatRefAndUneqDisGeoTol) anE =
+ Handle(StepDimTol_GeoTolAndGeoTolWthDatRefAndUneqDisGeoTol) anE =
Handle(StepDimTol_GeoTolAndGeoTolWthDatRefAndUneqDisGeoTol)::DownCast(theEnt);
theType = STEPCAFControl_GDTProperty::GetGeomToleranceType(anE->GetToleranceType());
}
- else if(theEnt->IsKind(STANDARD_TYPE(StepDimTol_AngularityTolerance)))
+ else if (theEnt->IsKind(STANDARD_TYPE(StepDimTol_AngularityTolerance)))
{
theType = XCAFDimTolObjects_GeomToleranceType_Angularity;
}
- else if(theEnt->IsKind(STANDARD_TYPE(StepDimTol_CircularRunoutTolerance)))
+ else if (theEnt->IsKind(STANDARD_TYPE(StepDimTol_CircularRunoutTolerance)))
{
theType = XCAFDimTolObjects_GeomToleranceType_CircularRunout;
}
- else if(theEnt->IsKind(STANDARD_TYPE(StepDimTol_RoundnessTolerance)))
+ else if (theEnt->IsKind(STANDARD_TYPE(StepDimTol_RoundnessTolerance)))
{
theType = XCAFDimTolObjects_GeomToleranceType_CircularityOrRoundness;
}
- else if(theEnt->IsKind(STANDARD_TYPE(StepDimTol_CoaxialityTolerance)))
+ else if (theEnt->IsKind(STANDARD_TYPE(StepDimTol_CoaxialityTolerance)))
{
theType = XCAFDimTolObjects_GeomToleranceType_Coaxiality;
}
- else if(theEnt->IsKind(STANDARD_TYPE(StepDimTol_ConcentricityTolerance)))
+ else if (theEnt->IsKind(STANDARD_TYPE(StepDimTol_ConcentricityTolerance)))
{
theType = XCAFDimTolObjects_GeomToleranceType_Concentricity;
}
- else if(theEnt->IsKind(STANDARD_TYPE(StepDimTol_CylindricityTolerance)))
+ else if (theEnt->IsKind(STANDARD_TYPE(StepDimTol_CylindricityTolerance)))
{
theType = XCAFDimTolObjects_GeomToleranceType_Cylindricity;
}
- else if(theEnt->IsKind(STANDARD_TYPE(StepDimTol_FlatnessTolerance)))
+ else if (theEnt->IsKind(STANDARD_TYPE(StepDimTol_FlatnessTolerance)))
{
theType = XCAFDimTolObjects_GeomToleranceType_Flatness;
}
- else if(theEnt->IsKind(STANDARD_TYPE(StepDimTol_ParallelismTolerance)))
+ else if (theEnt->IsKind(STANDARD_TYPE(StepDimTol_ParallelismTolerance)))
{
theType = XCAFDimTolObjects_GeomToleranceType_Parallelism;
}
- else if(theEnt->IsKind(STANDARD_TYPE(StepDimTol_PerpendicularityTolerance)))
+ else if (theEnt->IsKind(STANDARD_TYPE(StepDimTol_PerpendicularityTolerance)))
{
theType = XCAFDimTolObjects_GeomToleranceType_Perpendicularity;
}
- else if(theEnt->IsKind(STANDARD_TYPE(StepDimTol_PositionTolerance)) ||
- theEnt->IsKind(STANDARD_TYPE(StepDimTol_GeoTolAndGeoTolWthDatRefAndModGeoTolAndPosTol)))
+ else if (theEnt->IsKind(STANDARD_TYPE(StepDimTol_PositionTolerance)) ||
+ theEnt->IsKind(STANDARD_TYPE(StepDimTol_GeoTolAndGeoTolWthDatRefAndModGeoTolAndPosTol)))
{
theType = XCAFDimTolObjects_GeomToleranceType_Position;
}
- else if(theEnt->IsKind(STANDARD_TYPE(StepDimTol_LineProfileTolerance)))
+ else if (theEnt->IsKind(STANDARD_TYPE(StepDimTol_LineProfileTolerance)))
{
theType = XCAFDimTolObjects_GeomToleranceType_ProfileOfLine;
}
- else if(theEnt->IsKind(STANDARD_TYPE(StepDimTol_SurfaceProfileTolerance)))
+ else if (theEnt->IsKind(STANDARD_TYPE(StepDimTol_SurfaceProfileTolerance)))
{
theType = XCAFDimTolObjects_GeomToleranceType_ProfileOfSurface;
}
- else if(theEnt->IsKind(STANDARD_TYPE(StepDimTol_StraightnessTolerance)))
+ else if (theEnt->IsKind(STANDARD_TYPE(StepDimTol_StraightnessTolerance)))
{
theType = XCAFDimTolObjects_GeomToleranceType_Straightness;
}
- else if(theEnt->IsKind(STANDARD_TYPE(StepDimTol_SymmetryTolerance)))
+ else if (theEnt->IsKind(STANDARD_TYPE(StepDimTol_SymmetryTolerance)))
{
theType = XCAFDimTolObjects_GeomToleranceType_Symmetry;
}
- else if(theEnt->IsKind(STANDARD_TYPE(StepDimTol_TotalRunoutTolerance)))
+ else if (theEnt->IsKind(STANDARD_TYPE(StepDimTol_TotalRunoutTolerance)))
{
theType = XCAFDimTolObjects_GeomToleranceType_TotalRunout;
}
//purpose :
//=======================================================================
static void setGeomTolObjectToXCAF(const Handle(Standard_Transient)& theEnt,
- const TDF_Label& theTolL,
- const Handle(TDocStd_Document)& theDoc,
- const Handle(XSControl_WorkSession)& theWS)
+ const TDF_Label& theTolL,
+ const Handle(TDocStd_Document)& theDoc,
+ const Handle(XSControl_WorkSession)& theWS)
{
- Handle(XCAFDoc_ShapeTool) aSTool = XCAFDoc_DocumentTool::ShapeTool( theDoc->Main() );
- Handle(XCAFDoc_DimTolTool) aDGTTool = XCAFDoc_DocumentTool::DimTolTool( theDoc->Main() );
+ Handle(XCAFDoc_ShapeTool) aSTool = XCAFDoc_DocumentTool::ShapeTool(theDoc->Main());
+ Handle(XCAFDoc_DimTolTool) aDGTTool = XCAFDoc_DocumentTool::DimTolTool(theDoc->Main());
const Handle(XSControl_TransferReader) &aTR = theWS->TransferReader();
const Handle(Transfer_TransientProcess) &aTP = aTR->TransientProcess();
const Interface_Graph& aGraph = aTP->Graph();
Handle(XCAFDoc_GeomTolerance) aGTol;
- if(!theTolL.FindAttribute(XCAFDoc_GeomTolerance::GetID(), aGTol))
+ if (!theTolL.FindAttribute(XCAFDoc_GeomTolerance::GetID(), aGTol))
{
return;
}
XCAFDimTolObjects_GeomToleranceType aType = XCAFDimTolObjects_GeomToleranceType_None;
getTolType(theEnt, aType);
aTolObj->SetType(aType);
- if(!aTolEnt->Magnitude().IsNull()){
+ if (!aTolEnt->Magnitude().IsNull()) {
//get value
Standard_Real aVal = aTolEnt->Magnitude()->ValueComponent();
StepBasic_Unit anUnit = aTolEnt->Magnitude()->UnitComponent();
- if(anUnit.IsNull()) return;
- if( !(anUnit.CaseNum(anUnit.Value())==1) ) return;
+ if (anUnit.IsNull()) return;
+ if (!(anUnit.CaseNum(anUnit.Value()) == 1)) return;
Handle(StepBasic_NamedUnit) NU = anUnit.NamedUnit();
STEPConstruct_UnitContext anUnitCtx;
anUnitCtx.ComputeFactors(NU);
//get modifiers
XCAFDimTolObjects_GeomToleranceTypeValue aTypeV = XCAFDimTolObjects_GeomToleranceTypeValue_None;
Interface_EntityIterator anIter = aGraph.Sharings(aTolEnt);
- for(anIter.Start(); anIter.More(); anIter.Next()) {
- if(anIter.Value()->IsKind(STANDARD_TYPE(StepDimTol_ToleranceZone))){
- Handle(StepDimTol_ToleranceZoneForm) aForm
- = Handle(StepDimTol_ToleranceZone)::DownCast(anIter.Value())->Form();
+ for (anIter.Start(); anIter.More(); anIter.Next()) {
+ if (anIter.Value()->IsKind(STANDARD_TYPE(StepDimTol_ToleranceZone))) {
+ Handle(StepDimTol_ToleranceZoneForm) aForm
+ = Handle(StepDimTol_ToleranceZone)::DownCast(anIter.Value())->Form();
STEPCAFControl_GDTProperty::GetTolValueType(aForm->Name(), aTypeV);
Interface_EntityIterator anIt = aGraph.Sharings(anIter.Value());
- for(anIt.Start(); anIt.More(); anIt.Next()) {
- if(anIt.Value()->IsKind(STANDARD_TYPE(StepDimTol_ProjectedZoneDefinition))){
+ for (anIt.Start(); anIt.More(); anIt.Next()) {
+ if (anIt.Value()->IsKind(STANDARD_TYPE(StepDimTol_ProjectedZoneDefinition))) {
Handle(StepDimTol_ProjectedZoneDefinition) aPZone
- = Handle(StepDimTol_ProjectedZoneDefinition)::DownCast(anIt.Value());
- if(!aPZone->ProjectionLength().IsNull())
+ = Handle(StepDimTol_ProjectedZoneDefinition)::DownCast(anIt.Value());
+ if (!aPZone->ProjectionLength().IsNull())
{
Standard_Real aVal = aPZone->ProjectionLength()->ValueComponent();
StepBasic_Unit anUnit = aPZone->ProjectionLength()->UnitComponent();
- if(anUnit.IsNull()) return;
- if( !(anUnit.CaseNum(anUnit.Value())==1) ) return;
+ if (anUnit.IsNull()) return;
+ if (!(anUnit.CaseNum(anUnit.Value()) == 1)) return;
Handle(StepBasic_NamedUnit) NU = anUnit.NamedUnit();
STEPConstruct_UnitContext anUnitCtx;
anUnitCtx.ComputeFactors(NU);
else if (anIt.Value()->IsKind(STANDARD_TYPE(StepDimTol_RunoutZoneDefinition)))
{
Handle(StepDimTol_RunoutZoneDefinition) aRZone
- = Handle(StepDimTol_RunoutZoneDefinition)::DownCast(anIt.Value());
- if(!aRZone->Orientation().IsNull())
+ = Handle(StepDimTol_RunoutZoneDefinition)::DownCast(anIt.Value());
+ if (!aRZone->Orientation().IsNull())
{
Standard_Real aVal = aRZone->Orientation()->Angle()->ValueComponent();
StepBasic_Unit anUnit = aRZone->Orientation()->Angle()->UnitComponent();
- if(anUnit.IsNull()) continue;
- if( !(anUnit.CaseNum(anUnit.Value())==1) ) continue;
+ if (anUnit.IsNull()) continue;
+ if (!(anUnit.CaseNum(anUnit.Value()) == 1)) continue;
Handle(StepBasic_NamedUnit) NU = anUnit.NamedUnit();
STEPConstruct_UnitContext anUnitCtx;
anUnitCtx.ComputeFactors(NU);
else if (aTolEnt->IsKind(STANDARD_TYPE(StepDimTol_GeoTolAndGeoTolWthDatRefAndGeoTolWthMod)))
{
aModifiers = Handle(StepDimTol_GeoTolAndGeoTolWthDatRefAndGeoTolWthMod)
- ::DownCast(aTolEnt)->GetGeometricToleranceWithModifiers()->Modifiers();
+ ::DownCast(aTolEnt)->GetGeometricToleranceWithModifiers()->Modifiers();
}
else if (aTolEnt->IsKind(STANDARD_TYPE(StepDimTol_GeoTolAndGeoTolWthMod)))
{
aModifiers = Handle(StepDimTol_GeoTolAndGeoTolWthMod)
- ::DownCast(aTolEnt)->GetGeometricToleranceWithModifiers()->Modifiers();
+ ::DownCast(aTolEnt)->GetGeometricToleranceWithModifiers()->Modifiers();
}
else if (aTolEnt->IsKind(STANDARD_TYPE(StepDimTol_GeoTolAndGeoTolWthMaxTol)))
{
aModifiers = Handle(StepDimTol_GeoTolAndGeoTolWthMaxTol)
- ::DownCast(aTolEnt)->GetGeometricToleranceWithModifiers()->Modifiers();
+ ::DownCast(aTolEnt)->GetGeometricToleranceWithModifiers()->Modifiers();
}
else if (aTolEnt->IsKind(STANDARD_TYPE(StepDimTol_GeoTolAndGeoTolWthDatRefAndGeoTolWthMaxTol)))
{
aModifiers = Handle(StepDimTol_GeoTolAndGeoTolWthDatRefAndGeoTolWthMaxTol)
- ::DownCast(aTolEnt)->GetGeometricToleranceWithModifiers()->Modifiers();
+ ::DownCast(aTolEnt)->GetGeometricToleranceWithModifiers()->Modifiers();
}
- if(!aModifiers.IsNull())
+ if (!aModifiers.IsNull())
{
- for(Standard_Integer i = aModifiers->Lower(); i <= aModifiers->Upper(); i++)
+ for (Standard_Integer i = aModifiers->Lower(); i <= aModifiers->Upper(); i++)
{
- if(aModifiers->Value(i) == StepDimTol_GTMLeastMaterialRequirement)
+ if (aModifiers->Value(i) == StepDimTol_GTMLeastMaterialRequirement)
aTolObj->SetMaterialRequirementModifier(XCAFDimTolObjects_GeomToleranceMatReqModif_L);
else if (aModifiers->Value(i) == StepDimTol_GTMMaximumMaterialRequirement)
aTolObj->SetMaterialRequirementModifier(XCAFDimTolObjects_GeomToleranceMatReqModif_M);
}
else if (aTolEnt->IsKind(STANDARD_TYPE(StepDimTol_GeoTolAndGeoTolWthMaxTol)))
{
- Handle(StepDimTol_GeoTolAndGeoTolWthMaxTol) aMax =
+ Handle(StepDimTol_GeoTolAndGeoTolWthMaxTol) aMax =
Handle(StepDimTol_GeoTolAndGeoTolWthMaxTol)::DownCast(aTolEnt);
aVal = aMax->GetMaxTolerance()->ValueComponent();
anUnit = aMax->GetMaxTolerance()->UnitComponent();
}
else if (aTolEnt->IsKind(STANDARD_TYPE(StepDimTol_GeoTolAndGeoTolWthDatRefAndGeoTolWthMaxTol)))
{
- Handle(StepDimTol_GeoTolAndGeoTolWthDatRefAndGeoTolWthMaxTol) aMax =
+ Handle(StepDimTol_GeoTolAndGeoTolWthDatRefAndGeoTolWthMaxTol) aMax =
Handle(StepDimTol_GeoTolAndGeoTolWthDatRefAndGeoTolWthMaxTol)::DownCast(aTolEnt);
aVal = aMax->GetMaxTolerance()->ValueComponent();
anUnit = aMax->GetMaxTolerance()->UnitComponent();
convertAngleValue(anUnitCtx, aVal);
aTolObj->SetMaxValueModifier(aVal);
}
-
+
readAnnotation(aTR, theEnt, aTolObj);
aGTol->SetObject(aTolObj);
}
//=======================================================================
Standard_Boolean STEPCAFControl_Reader::ReadGDTs(const Handle(XSControl_WorkSession)& theWS,
- Handle(TDocStd_Document)& theDoc)
+ Handle(TDocStd_Document)& theDoc)
{
const Handle(Interface_InterfaceModel) &aModel = theWS->Model();
const Interface_Graph& aGraph = theWS->Graph();
Handle(StepData_StepModel) aSM = Handle(StepData_StepModel)::DownCast(aModel);
Interface_EntityIterator anI = aSM->Header();
Handle(HeaderSection_FileSchema) aH;
- for(anI.Start(); anI.More() && aH.IsNull();anI.Next())
+ for (anI.Start(); anI.More() && aH.IsNull();anI.Next())
aH = Handle(HeaderSection_FileSchema)::DownCast(anI.Value());
- Handle(XCAFDoc_ShapeTool) aSTool = XCAFDoc_DocumentTool::ShapeTool( theDoc->Main() );
- Handle(XCAFDoc_DimTolTool) aDGTTool = XCAFDoc_DocumentTool::DimTolTool( theDoc->Main() );
- if ( aDGTTool.IsNull() ) return Standard_False;
+ Handle(XCAFDoc_ShapeTool) aSTool = XCAFDoc_DocumentTool::ShapeTool(theDoc->Main());
+ Handle(XCAFDoc_DimTolTool) aDGTTool = XCAFDoc_DocumentTool::DimTolTool(theDoc->Main());
+ if (aDGTTool.IsNull()) return Standard_False;
Standard_Integer nb = aModel->NbEntities();
- for(Standard_Integer i=1; i<=nb; i++) {
+ for (Standard_Integer i = 1; i <= nb; i++) {
Handle(Standard_Transient) anEnt = aModel->Value(i);
- if(anEnt->IsKind(STANDARD_TYPE(StepShape_DimensionalSize)) ||
- anEnt->IsKind(STANDARD_TYPE(StepShape_DimensionalLocation)) ||
- anEnt->IsKind(STANDARD_TYPE(StepDimTol_GeometricTolerance))) {
- TDF_Label aGDTL = createGDTObjectInXCAF(anEnt,theDoc,theWS);
- if(!aGDTL.IsNull()){
- if(anEnt->IsKind(STANDARD_TYPE(StepDimTol_GeometricTolerance))){
- setGeomTolObjectToXCAF(anEnt, aGDTL,theDoc,theWS);
+ if (anEnt->IsKind(STANDARD_TYPE(StepShape_DimensionalSize)) ||
+ anEnt->IsKind(STANDARD_TYPE(StepShape_DimensionalLocation)) ||
+ anEnt->IsKind(STANDARD_TYPE(StepDimTol_GeometricTolerance))) {
+ TDF_Label aGDTL = createGDTObjectInXCAF(anEnt, theDoc, theWS);
+ if (!aGDTL.IsNull()) {
+ if (anEnt->IsKind(STANDARD_TYPE(StepDimTol_GeometricTolerance))) {
+ setGeomTolObjectToXCAF(anEnt, aGDTL, theDoc, theWS);
}
else {
- setDimObjectToXCAF(anEnt, aGDTL,theDoc,theWS);
+ setDimObjectToXCAF(anEnt, aGDTL, theDoc, theWS);
}
}
}
Handle(StepVisual_AnnotationPlane) anAnPlane;
for (Interface_EntityIterator anIter = aGraph.Sharings(anEnt); anIter.More() && anAnPlane.IsNull(); anIter.Next())
anAnPlane = Handle(StepVisual_AnnotationPlane)::DownCast(anIter.Value());
-
+
// Set object to XCAF
TDF_Label aGDTL = aDGTTool->AddDimension();
myGDTMap.Bind(anEnt, aGDTL);
//=======================================================================
static Handle(StepShape_SolidModel) FindSolidForPDS(const Handle(StepRepr_ProductDefinitionShape) &PDS,
- const Interface_Graph &graph)
+ const Interface_Graph &graph)
{
Handle(StepShape_SolidModel) SM;
Interface_EntityIterator subs = graph.Sharings(PDS);
Handle(StepShape_ShapeRepresentation) SR;
- for(subs.Start(); subs.More() && SM.IsNull(); subs.Next()) {
+ for (subs.Start(); subs.More() && SM.IsNull(); subs.Next()) {
Handle(StepShape_ShapeDefinitionRepresentation) SDR =
Handle(StepShape_ShapeDefinitionRepresentation)::DownCast(subs.Value());
- if(SDR.IsNull()) continue;
+ if (SDR.IsNull()) continue;
SR = Handle(StepShape_ShapeRepresentation)::DownCast(SDR->UsedRepresentation());
- if(SR.IsNull()) continue;
- for(Standard_Integer i=1; i<=SR->NbItems() && SM.IsNull(); i++) {
+ if (SR.IsNull()) continue;
+ for (Standard_Integer i = 1; i <= SR->NbItems() && SM.IsNull(); i++) {
SM = Handle(StepShape_SolidModel)::DownCast(SR->ItemsValue(i));
}
- if(SM.IsNull()) {
+ if (SM.IsNull()) {
Interface_EntityIterator subs1 = graph.Sharings(SR);
- for(subs1.Start(); subs1.More() && SM.IsNull(); subs1.Next()) {
+ for (subs1.Start(); subs1.More() && SM.IsNull(); subs1.Next()) {
Handle(StepRepr_RepresentationRelationship) RR =
Handle(StepRepr_RepresentationRelationship)::DownCast(subs1.Value());
- if(RR.IsNull()) continue;
+ if (RR.IsNull()) continue;
Handle(StepShape_ShapeRepresentation) SR2;
- if(RR->Rep1()==SR) SR2 = Handle(StepShape_ShapeRepresentation)::DownCast(RR->Rep2());
+ if (RR->Rep1() == SR) SR2 = Handle(StepShape_ShapeRepresentation)::DownCast(RR->Rep2());
else SR2 = Handle(StepShape_ShapeRepresentation)::DownCast(RR->Rep1());
- if(SR2.IsNull()) continue;
- for(Standard_Integer i2=1; i2<=SR2->NbItems() && SM.IsNull(); i2++) {
+ if (SR2.IsNull()) continue;
+ for (Standard_Integer i2 = 1; i2 <= SR2->NbItems() && SM.IsNull(); i2++) {
SM = Handle(StepShape_SolidModel)::DownCast(SR2->ItemsValue(i2));
}
}
//=======================================================================
Standard_Boolean STEPCAFControl_Reader::ReadMaterials(const Handle(XSControl_WorkSession) &WS,
- Handle(TDocStd_Document)& Doc,
- const Handle(TColStd_HSequenceOfTransient) &SeqPDS) const
+ Handle(TDocStd_Document)& Doc,
+ const Handle(TColStd_HSequenceOfTransient) &SeqPDS) const
{
const Handle(XSControl_TransferReader) &TR = WS->TransferReader();
const Handle(Transfer_TransientProcess) &TP = TR->TransientProcess();
- Handle(XCAFDoc_ShapeTool) STool = XCAFDoc_DocumentTool::ShapeTool( Doc->Main() );
- Handle(XCAFDoc_MaterialTool) MatTool = XCAFDoc_DocumentTool::MaterialTool( Doc->Main() );
- if(MatTool.IsNull()) return Standard_False;
-
+ Handle(XCAFDoc_ShapeTool) STool = XCAFDoc_DocumentTool::ShapeTool(Doc->Main());
+ Handle(XCAFDoc_MaterialTool) MatTool = XCAFDoc_DocumentTool::MaterialTool(Doc->Main());
+ if (MatTool.IsNull()) return Standard_False;
+
const Interface_Graph& graph = TP->Graph();
- for(Standard_Integer i=1; i<=SeqPDS->Length(); i++) {
+ for (Standard_Integer i = 1; i <= SeqPDS->Length(); i++) {
Handle(StepRepr_ProductDefinitionShape) PDS =
Handle(StepRepr_ProductDefinitionShape)::DownCast(SeqPDS->Value(i));
- if(PDS.IsNull())
+ if (PDS.IsNull())
continue;
Handle(StepBasic_ProductDefinition) aProdDef = PDS->Definition().ProductDefinition();
- if(aProdDef.IsNull())
+ if (aProdDef.IsNull())
continue;
Handle(TCollection_HAsciiString) aName = new TCollection_HAsciiString("");
Handle(TCollection_HAsciiString) aDescription = new TCollection_HAsciiString("");
Handle(TCollection_HAsciiString) aDensName = new TCollection_HAsciiString("");
Handle(TCollection_HAsciiString) aDensValType = new TCollection_HAsciiString("");
- Standard_Real aDensity=0;
- Interface_EntityIterator subs = graph.Sharings( aProdDef);
- for(subs.Start(); subs.More(); subs.Next()) {
+ Standard_Real aDensity = 0;
+ Interface_EntityIterator subs = graph.Sharings(aProdDef);
+ for (subs.Start(); subs.More(); subs.Next()) {
Handle(StepRepr_PropertyDefinition) PropD =
Handle(StepRepr_PropertyDefinition)::DownCast(subs.Value());
- if(PropD.IsNull()) continue;
+ if (PropD.IsNull()) continue;
Interface_EntityIterator subs1 = graph.Sharings(PropD);
- for(subs1.Start(); subs1.More(); subs1.Next()) {
+ for (subs1.Start(); subs1.More(); subs1.Next()) {
Handle(StepRepr_PropertyDefinitionRepresentation) PDR =
Handle(StepRepr_PropertyDefinitionRepresentation)::DownCast(subs1.Value());
- if(PDR.IsNull()) continue;
+ if (PDR.IsNull()) continue;
Handle(StepRepr_Representation) Repr = PDR->UsedRepresentation();
- if(Repr.IsNull()) continue;
+ if (Repr.IsNull()) continue;
Standard_Integer ir;
- for(ir=1; ir<=Repr->NbItems(); ir++) {
+ for (ir = 1; ir <= Repr->NbItems(); ir++) {
Handle(StepRepr_RepresentationItem) RI = Repr->ItemsValue(ir);
- if(RI.IsNull()) continue;
- if(RI->IsKind(STANDARD_TYPE(StepRepr_DescriptiveRepresentationItem))) {
+ if (RI.IsNull()) continue;
+ if (RI->IsKind(STANDARD_TYPE(StepRepr_DescriptiveRepresentationItem))) {
// find name and description for material
Handle(StepRepr_DescriptiveRepresentationItem) DRI =
Handle(StepRepr_DescriptiveRepresentationItem)::DownCast(RI);
aName = DRI->Name();
-
+
aDescription = DRI->Description();
- if(aName.IsNull())
+ if (aName.IsNull())
aName = aDescription;
}
- if(RI->IsKind(STANDARD_TYPE(StepRepr_MeasureRepresentationItem))) {
+ if (RI->IsKind(STANDARD_TYPE(StepRepr_MeasureRepresentationItem))) {
// try to find density for material
Handle(StepRepr_MeasureRepresentationItem) MRI =
Handle(StepRepr_MeasureRepresentationItem)::DownCast(RI);
aDensName = MRI->Name();
aDensValType = new TCollection_HAsciiString(MRI->Measure()->ValueComponentMember()->Name());
StepBasic_Unit aUnit = MRI->Measure()->UnitComponent();
- if(!aUnit.IsNull()) {
+ if (!aUnit.IsNull()) {
Handle(StepBasic_DerivedUnit) DU = aUnit.DerivedUnit();
- if(DU.IsNull()) continue;
- for(Standard_Integer idu=1; idu<=DU->NbElements(); idu++) {
+ if (DU.IsNull()) continue;
+ for (Standard_Integer idu = 1; idu <= DU->NbElements(); idu++) {
Handle(StepBasic_DerivedUnitElement) DUE = DU->ElementsValue(idu);
Handle(StepBasic_NamedUnit) NU = DUE->Unit();
- if(NU->IsKind(STANDARD_TYPE(StepBasic_ConversionBasedUnitAndLengthUnit)) ||
- NU->IsKind(STANDARD_TYPE(StepBasic_SiUnitAndLengthUnit)))
+ if (NU->IsKind(STANDARD_TYPE(StepBasic_ConversionBasedUnitAndLengthUnit)) ||
+ NU->IsKind(STANDARD_TYPE(StepBasic_SiUnitAndLengthUnit)))
{
STEPConstruct_UnitContext anUnitCtx;
anUnitCtx.ComputeFactors(NU);
aDensity = aDensity*1000. / (UnitsMethods::GetCasCadeLengthUnit()
* UnitsMethods::GetCasCadeLengthUnit() * UnitsMethods::GetCasCadeLengthUnit());
}
- if(NU->IsKind(STANDARD_TYPE(StepBasic_ConversionBasedUnitAndMassUnit))) {
+ if (NU->IsKind(STANDARD_TYPE(StepBasic_ConversionBasedUnitAndMassUnit))) {
Standard_Real afact = 1.;
if (GetMassConversionFactor(NU, afact))
{
}
}
}
-
- if( aName.IsNull() || aName->Length()==0 )
+
+ if (aName.IsNull() || aName->Length() == 0)
continue;
// find shape label amd create Material link
TopoDS_Shape aSh;
- Handle(StepShape_SolidModel) SM = FindSolidForPDS(PDS,graph);
- if(!SM.IsNull()) {
+ Handle(StepShape_SolidModel) SM = FindSolidForPDS(PDS, graph);
+ if (!SM.IsNull()) {
Standard_Integer index = TP->MapIndex(SM);
- if(index >0) {
+ if (index > 0) {
Handle(Transfer_Binder) binder = TP->MapItem(index);
- if(!binder.IsNull())
+ if (!binder.IsNull())
aSh = TransferBRep::ShapeResult(binder);
}
}
- if(aSh.IsNull()) continue;
+ if (aSh.IsNull()) continue;
TDF_Label shL;
- if( !STool->Search(aSh, shL, Standard_True, Standard_True, Standard_True) ) continue;
- MatTool->SetMaterial(shL,aName,aDescription,aDensity,aDensName,aDensValType);
+ if (!STool->Search(aSh, shL, Standard_True, Standard_True, Standard_True)) continue;
+ MatTool->SetMaterial(shL, aName, aDescription, aDensity, aDensName, aDensValType);
}
return Standard_True;
//=======================================================================
TDF_Label STEPCAFControl_Reader::SettleShapeData(const Handle(StepRepr_RepresentationItem)& theItem,
- const TDF_Label& theLab,
- const Handle(XCAFDoc_ShapeTool)& theShapeTool,
- const Handle(Transfer_TransientProcess)& TP) const
+ const TDF_Label& theLab,
+ const Handle(XCAFDoc_ShapeTool)& theShapeTool,
+ const Handle(Transfer_TransientProcess)& TP) const
{
TDF_Label aResult = theLab;
Handle(TCollection_HAsciiString) hName = theItem->Name();
- if ( hName.IsNull() || hName->IsEmpty() )
+ if (hName.IsNull() || hName->IsEmpty())
return aResult;
Handle(Transfer_Binder) aBinder = TP->Find(theItem);
- if ( aBinder.IsNull() )
+ if (aBinder.IsNull())
return aResult;
TopoDS_Shape aShape = TransferBRep::ShapeResult(aBinder);
- if ( aShape.IsNull() )
+ if (aShape.IsNull())
return aResult;
// Allocate sub-Label
//=======================================================================
void collectRepresentationItems(const Interface_Graph& theGraph,
- const Handle(StepShape_ShapeRepresentation)& theRepresentation,
- NCollection_Sequence<Handle(StepRepr_RepresentationItem)>& theItems)
+ const Handle(StepShape_ShapeRepresentation)& theRepresentation,
+ NCollection_Sequence<Handle(StepRepr_RepresentationItem)>& theItems)
{
Handle(StepRepr_HArray1OfRepresentationItem) aReprItems = theRepresentation->Items();
for (Standard_Integer itemIt = aReprItems->Lower(); itemIt <= aReprItems->Upper(); itemIt++)
//=======================================================================
void STEPCAFControl_Reader::ExpandSubShapes(const Handle(XCAFDoc_ShapeTool)& ShapeTool,
- const XCAFDoc_DataMapOfShapeLabel& ShapeLabelMap,
- const STEPCAFControl_DataMapOfShapePD& ShapePDMap) const
+ const XCAFDoc_DataMapOfShapeLabel& ShapeLabelMap,
+ const STEPCAFControl_DataMapOfShapePD& ShapePDMap) const
{
const Handle(Transfer_TransientProcess)& TP = Reader().WS()->TransferReader()->TransientProcess();
NCollection_DataMap<TopoDS_Shape, Handle(TCollection_HAsciiString)> ShapeNameMap;
// Read translation control variables
Standard_Boolean doReadSNames = (Interface_Static::IVal("read.stepcaf.subshapes.name") > 0);
- if ( !doReadSNames )
+ if (!doReadSNames)
return;
const Interface_Graph& Graph = Reader().WS()->Graph();
- for ( STEPCAFControl_DataMapIteratorOfDataMapOfShapePD it(ShapePDMap); it.More(); it.Next() )
+ for (STEPCAFControl_DataMapIteratorOfDataMapOfShapePD it(ShapePDMap); it.More(); it.Next())
{
const TopoDS_Shape& aRootShape = it.Key();
const Handle(StepBasic_ProductDefinition)& aPDef = it.Value();
- if ( aPDef.IsNull() )
+ if (aPDef.IsNull())
continue;
// Find SDR by Product
Handle(StepShape_ShapeDefinitionRepresentation) aSDR;
- Interface_EntityIterator entIt = Graph.TypedSharings( aPDef, STANDARD_TYPE(StepShape_ShapeDefinitionRepresentation) );
- for ( entIt.Start(); entIt.More(); entIt.Next() )
+ Interface_EntityIterator entIt = Graph.TypedSharings(aPDef, STANDARD_TYPE(StepShape_ShapeDefinitionRepresentation));
+ for (entIt.Start(); entIt.More(); entIt.Next())
{
const Handle(Standard_Transient)& aReferer = entIt.Value();
aSDR = Handle(StepShape_ShapeDefinitionRepresentation)::DownCast(aReferer);
- if ( !aSDR.IsNull() )
+ if (!aSDR.IsNull())
break;
}
- if ( aSDR.IsNull() )
+ if (aSDR.IsNull())
continue;
// Access shape representation
Handle(StepShape_ShapeRepresentation)
- aShapeRepr = Handle(StepShape_ShapeRepresentation)::DownCast( aSDR->UsedRepresentation() );
+ aShapeRepr = Handle(StepShape_ShapeRepresentation)::DownCast(aSDR->UsedRepresentation());
- if ( aShapeRepr.IsNull() )
+ if (aShapeRepr.IsNull())
continue;
// Access representation items
if (aReprItems.Length() == 0)
continue;
- if ( !ShapeLabelMap.IsBound(aRootShape) )
+ if (!ShapeLabelMap.IsBound(aRootShape))
continue;
TDF_Label aRootLab = ShapeLabelMap.Find(aRootShape);
for (Standard_Integer i = 1; i <= aReprItems.Length(); ++i)
{
Handle(StepRepr_RepresentationItem) aTRepr = aReprItems.Value(i);
- if ( aTRepr->IsKind( STANDARD_TYPE(StepShape_ManifoldSolidBrep) ) )
+ if (aTRepr->IsKind(STANDARD_TYPE(StepShape_ManifoldSolidBrep)))
aMSBSeq.Append(aTRepr);
- else if ( aTRepr->IsKind( STANDARD_TYPE(StepShape_ShellBasedSurfaceModel) ) )
+ else if (aTRepr->IsKind(STANDARD_TYPE(StepShape_ShellBasedSurfaceModel)))
aSBSMSeq.Append(aTRepr);
}
Standard_Boolean doInsertSolidLab = (aMSBSeq.Length() > 1);
// Expand Manifold Solid BReps
- for ( Standard_Integer i = 1; i <= aMSBSeq.Length(); ++i )
+ for (Standard_Integer i = 1; i <= aMSBSeq.Length(); ++i)
{
// Put additional Label for SOLID
if (doInsertSolidLab)
}
// Expand Shell-Based Surface Models
- for ( Standard_Integer i = 1; i <= aSBSMSeq.Length(); ++i )
+ for (Standard_Integer i = 1; i <= aSBSMSeq.Length(); ++i)
ExpandSBSM(aRootLab, aSBSMSeq.Value(i), TP, ShapeTool);
}
}
//=======================================================================
void STEPCAFControl_Reader::ExpandManifoldSolidBrep(TDF_Label& ShapeLab,
- const Handle(StepRepr_RepresentationItem)& Repr,
- const Handle(Transfer_TransientProcess)& TP,
- const Handle(XCAFDoc_ShapeTool)& ShapeTool) const
+ const Handle(StepRepr_RepresentationItem)& Repr,
+ const Handle(Transfer_TransientProcess)& TP,
+ const Handle(XCAFDoc_ShapeTool)& ShapeTool) const
{
// Access outer shell
Handle(StepShape_ManifoldSolidBrep) aMSB = Handle(StepShape_ManifoldSolidBrep)::DownCast(Repr);
//=======================================================================
void STEPCAFControl_Reader::ExpandSBSM(TDF_Label& ShapeLab,
- const Handle(StepRepr_RepresentationItem)& Repr,
- const Handle(Transfer_TransientProcess)& TP,
- const Handle(XCAFDoc_ShapeTool)& ShapeTool) const
+ const Handle(StepRepr_RepresentationItem)& Repr,
+ const Handle(Transfer_TransientProcess)& TP,
+ const Handle(XCAFDoc_ShapeTool)& ShapeTool) const
{
Handle(StepShape_ShellBasedSurfaceModel) aSBSM = Handle(StepShape_ShellBasedSurfaceModel)::DownCast(Repr);
// Access boundary shells
Handle(StepShape_HArray1OfShell) aShells = aSBSM->SbsmBoundary();
- for ( Standard_Integer s = aShells->Lower(); s <= aShells->Upper(); ++s )
+ for (Standard_Integer s = aShells->Lower(); s <= aShells->Upper(); ++s)
{
const StepShape_Shell& aShell = aShells->Value(s);
Handle(StepShape_ConnectedFaceSet) aCFS;
Handle(StepShape_OpenShell) anOpenShell = aShell.OpenShell();
Handle(StepShape_ClosedShell) aClosedShell = aShell.ClosedShell();
- if ( !anOpenShell.IsNull() )
+ if (!anOpenShell.IsNull())
aCFS = anOpenShell;
else
aCFS = aClosedShell;
//=======================================================================
void STEPCAFControl_Reader::ExpandShell(const Handle(StepShape_ConnectedFaceSet)& Shell,
- TDF_Label& RootLab,
- const Handle(Transfer_TransientProcess)& TP,
- const Handle(XCAFDoc_ShapeTool)& ShapeTool) const
+ TDF_Label& RootLab,
+ const Handle(Transfer_TransientProcess)& TP,
+ const Handle(XCAFDoc_ShapeTool)& ShapeTool) const
{
// Record CAF data
SettleShapeData(Shell, RootLab, ShapeTool, TP);
// Access faces
Handle(StepShape_HArray1OfFace) aFaces = Shell->CfsFaces();
- for ( Standard_Integer f = aFaces->Lower(); f <= aFaces->Upper(); ++f )
+ for (Standard_Integer f = aFaces->Lower(); f <= aFaces->Upper(); ++f)
{
const Handle(StepShape_Face)& aFace = aFaces->Value(f);
if (aFace.IsNull())
// Access face bounds
Handle(StepShape_HArray1OfFaceBound) aWires = aFace->Bounds();
- for ( Standard_Integer w = aWires->Lower(); w <= aWires->Upper(); ++w )
+ for (Standard_Integer w = aWires->Lower(); w <= aWires->Upper(); ++w)
{
const Handle(StepShape_Loop)& aWire = aWires->Value(w)->Bound();
// Access wire edges
// Currently only EDGE LOOPs are considered (!)
- if ( !aWire->IsInstance( STANDARD_TYPE(StepShape_EdgeLoop) ) )
+ if (!aWire->IsInstance(STANDARD_TYPE(StepShape_EdgeLoop)))
continue;
// Access edges
Handle(StepShape_EdgeLoop) anEdgeLoop = Handle(StepShape_EdgeLoop)::DownCast(aWire);
Handle(StepShape_HArray1OfOrientedEdge) anEdges = anEdgeLoop->EdgeList();
- for ( Standard_Integer e = anEdges->Lower(); e <= anEdges->Upper(); ++e )
+ for (Standard_Integer e = anEdges->Lower(); e <= anEdges->Upper(); ++e)
{
Handle(StepShape_Edge) anEdge = anEdges->Value(e)->EdgeElement();
//purpose :
//=======================================================================
-void STEPCAFControl_Reader::SetColorMode (const Standard_Boolean colormode)
+void STEPCAFControl_Reader::SetColorMode(const Standard_Boolean colormode)
{
myColorMode = colormode;
}
//purpose :
//=======================================================================
-Standard_Boolean STEPCAFControl_Reader::GetColorMode () const
+Standard_Boolean STEPCAFControl_Reader::GetColorMode() const
{
return myColorMode;
}
//purpose :
//=======================================================================
-void STEPCAFControl_Reader::SetNameMode (const Standard_Boolean namemode)
+void STEPCAFControl_Reader::SetNameMode(const Standard_Boolean namemode)
{
myNameMode = namemode;
}
//purpose :
//=======================================================================
-Standard_Boolean STEPCAFControl_Reader::GetNameMode () const
+Standard_Boolean STEPCAFControl_Reader::GetNameMode() const
{
return myNameMode;
}
//purpose :
//=======================================================================
-void STEPCAFControl_Reader::SetLayerMode (const Standard_Boolean layermode)
+void STEPCAFControl_Reader::SetLayerMode(const Standard_Boolean layermode)
{
myLayerMode = layermode;
}
//purpose :
//=======================================================================
-Standard_Boolean STEPCAFControl_Reader::GetLayerMode () const
+Standard_Boolean STEPCAFControl_Reader::GetLayerMode() const
{
return myLayerMode;
}
//purpose :
//=======================================================================
-void STEPCAFControl_Reader::SetPropsMode (const Standard_Boolean propsmode)
+void STEPCAFControl_Reader::SetPropsMode(const Standard_Boolean propsmode)
{
myPropsMode = propsmode;
}
//purpose :
//=======================================================================
-Standard_Boolean STEPCAFControl_Reader::GetPropsMode () const
+Standard_Boolean STEPCAFControl_Reader::GetPropsMode() const
{
return myPropsMode;
}
//purpose :
//=======================================================================
-void STEPCAFControl_Reader::SetSHUOMode (const Standard_Boolean mode)
+void STEPCAFControl_Reader::SetSHUOMode(const Standard_Boolean mode)
{
mySHUOMode = mode;
}
//purpose :
//=======================================================================
-Standard_Boolean STEPCAFControl_Reader::GetSHUOMode () const
+Standard_Boolean STEPCAFControl_Reader::GetSHUOMode() const
{
return mySHUOMode;
}
//purpose :
//=======================================================================
-void STEPCAFControl_Reader::SetGDTMode (const Standard_Boolean gdtmode)
+void STEPCAFControl_Reader::SetGDTMode(const Standard_Boolean gdtmode)
{
myGDTMode = gdtmode;
}
//purpose :
//=======================================================================
-Standard_Boolean STEPCAFControl_Reader::GetGDTMode () const
+Standard_Boolean STEPCAFControl_Reader::GetGDTMode() const
{
return myGDTMode;
}
//purpose :
//=======================================================================
-void STEPCAFControl_Reader::SetMatMode (const Standard_Boolean matmode)
+void STEPCAFControl_Reader::SetMatMode(const Standard_Boolean matmode)
{
myMatMode = matmode;
}
//purpose :
//=======================================================================
-Standard_Boolean STEPCAFControl_Reader::GetMatMode () const
+Standard_Boolean STEPCAFControl_Reader::GetMatMode() const
{
return myMatMode;
}
projects / occt.git / commitdiff