Update of tests database
Test for
0028167: Fillet has strange form at its end
Test for
0028168: Exception is raised during Boolean operation
Test for
0028194: BRepMesh - Standard_OutOfRange exception on valid shape
Test for
0028200: Invalid topology of the general fuse result
Test for
0028216: Intersection of a face and a solid is broken up leading to empty result of Boolean common operation
Test for
0028245: Result of Cells Builder algorithm becomes invalid after removal of internal boundaries on faces
Test for
0028247: Effect of minSize parameter of BRepMesh_IncrementalMesh seems to be too strong
Test for
0028274: BOPAlgo_MakerVolume fails to create solid
Test for
0028279: Greater oscillations and higher degree of resulting B-Spline in cylinder-cylinder intersections in 7.1.0
Test for
0028354: Filleting destroys shape if the filleted edge touches a seam edge
Test for
0028366: BOP Common fails with solid and planar face
Test for
0028379: BRepMesh produces mangled mesh for a cone
Test for
0028388: Boolean common of simple face and solid results in empty compound
Test for
0028393: Boolean cut produce wrong result.
Test for
0028402: Modeling - calculation of properties of complex compounds is slow
Test for
0028406: High tolerances after boolean operation on OCCT 6.9.1
Test for
0028694: IGES reader produces too small edge covered by its vertices
Test for
0028719: Mesh - Display issue for special model
Test for
0028108: Sweep fails in "Right Corner" mode
Test for
0028696: Offset 2D algorithm produces micro edges
Test for
0028700: BRepBuilderAPI_Sewing produces too small edge covered by its vertices
Test for
0028722: Conversion of a spherical face to a spline produces an invalid shape
Test for
0028739: Draft on face fails
Test for
0028662: Data Exchange - Exception during reading large STEP file.
Test for
0028768: ShapeFix slighly corrupts the source face
Test for
0028485: Fuse of two shapes using gluing and non-destructive options gives invalid result
Test for
0028500: Artifact in shaded view of the shape
Test for
0028523: Fixshape reverses the orientation of the face
Test for
0028544: Big tolerance value is returned by Implicit-parametric algorithm
Test for
0028571: BRepOffsetAPI_MakeOffset build invalid wire
Test for
0028572: Wrong result of the mkface command
Test for
0028595: Shifting 2d curves for non-periodic surfaces leads to incorrect result.
Test for
0028596: Erroneous fillet
Test for
0028640: BRepBuilderAPI_Transform build invalid shape
Test for
0028656: 3d offset modifies the input shape
Test for
0000077: BUC60866. The BRepFill_Pipe fails.
Test for
0000078: BUC60875. Pipe is created incorrectly on two wires.
Test for
0000082: BUC60908. Incomplete section of shell by plane.
Test for
0000083: BUC60912. Section of simple BSpline surfaces is performed too slow.
Test for
0000862: GeomAPI_ExtremaCurveCurve fails on given curves
Test for
0002442: Error in BRepClass3d_SolidClassifier
Test for
0003936: Face on a surface of extrusion is extended after import to IGES
Test for
0005081: BRepOffset_MakeOffsetShape algorithm does not return valid result.
Test for
0005145: Wrong result of projection of a circle on a sphere.
Test for
0014846: ShapeFix_Wireframe::FixWireGaps() works wrong on a shape with seam edge
Test for
0016424: Exception in reading of attached IGES file
Test for
0010377: Incorrect fuse result when objects tangent by planar face
Test for
0013565: Incorrect result of Common operation
Test for
0013566: Incorrect result of Extrema between a large circle and a line
Test for
0024632: Artifacts during Boolean cut operation on neighboring parts
Test for
0005582: Impossible to make offset on the shape with degenerated edge