+++ /dev/null
-!LOADING PHASE
-! general messages have been factorised in XSTEP general file
-.9
-Beginning of the IGES file reading.
-!
-.10
-End of the IGES file reading.
-!
-.12
-Header and Content of IGES file are loaded.
-!
-.18
-Syntax error in the IGES file at line %d of the section %s.
-!
-.19
-Syntax error in the IGES file at line %d of the section %s (line number may be incorrect).
-!
-.20
-There is no Terminate Section, please check the end of the IGES file. The process continues.
-!
-.27
-Entity %s : Directory Entry : there is no parameter. The process continues.
-!
-.28
-Entity %s : Directory Entry : The parameter 1 (Type de l'entité) is incorrect.
-!
-.29
-Entity %s, Type %d : Directory Entry : The Field 4 (Line Font Pattern) is incorrect (Not null pointer or Integer between 0 and 5 is expected). incorrect (not null pointer or integer between 0 and 5 is expected).
-!
-.30
-Entity %s, Type %d : Directory Entry : The Field 5 (Level) is incorrect (Not null pointer or not null Integer is expected).
-!
-.31
-Entity %s, Type %d : Directory Entry : The Field 6 (View) is incorrect (Not null pointer or Integer Zero is expected).
-!
-.32
-Entity %s, Type %d : Directory Entry : The Field 7 (Transformation Matrix) is incorrect (Not null pointer or Integer Zero is expected).
-!
-.33
-Entity %s, Type %d : Directory Entry : The Field 8 (Label Display Associativity) is incorrect (Not null pointer or Integer Zero is expected).
-!
-.34
-Entity %s, Type %d : Directory Entry : The Field 13 (Color Number) is incorrect (Not null pointer or Integer between 0 and 8 is expected).
-!
-.35
-Null Entity %s.
-!
-.36
-Unknown Entity %s.
-!
-.37
-Entity %s, Type %d : The Associativity list is incorrect.
-!
-.38
-Entity %s, Type %d : The Property list is incorrect.
-! ANALYSIS PHASE
-.39
-Global Section : Incorrect number of parameters (%d or %d parameters are expected).
-!
-.40
-Global Section (Parameters 1 and 2) : Parameter Delimiter Character and Record Delimiter Character must be different.
-!
-.41
-Global Section (Parameter 2) : The Parameter Delimiter Character is incorrect. Default character Coma is taken.
-!
-.42
-Global Section (Parameter 2) : The Character Record Delimiter parameter is incorrect. Default character Semicolon is taken.
-!
-.43
-Global Section (Parameter 8) : The Single Precision Magnitude parameter is incorrect (Expected Positive Integer). Default value 38 is taken.
-!
-.44
-Global Section (Parameter 9) : The Single Precision Significance parameter is incorrect (Expected Positive Integer). Default value 6 is taken.
-!
-.45
-Global Section (Parameter 10) : The Double Precision Magnitude parameter is incorrect (Expected Positive Integer). Default value 308 is taken.
-!
-.46
-Global Section (Parameter 11) : The Double Precision Significance parameter is incorrect (Expected Positive Integer). Default value 15 is taken.
-!
-.47
-Global Section (Parameter 13) : the Model Space Scale parameter is incorrect (Expected Positive). Default value 1.0 is taken.
-!
-.48
-Global Section (Parameter 14) : The Unit Flag parameter is incorrect (Integer between 1 et 11 is expected). Default value 2 is taken : Millimeters.
-!
-.49
-Global Section (Parameter 15): The Unit Name parameter is not recognized. Default value 2 is taken : Millimeters.srl
-!
-.50
-Global Section (Parameter 15) : The Unit Name parameter is undefined, ignored
-!
-.51
-Global Section (Parameter 14 and 15) : The Unit Flag parameter doesn't correspond to the Unit Name parameter : Unit Name ignored.
-!
-.52
-Global Section (Parameter 19) : The (Expected Positive Real). Default value 0.0 is taken.
-!
-.53
-Global Section (Parameter 23) : The Version Flag parameter is incorrect (Integer between 1 et 11 is expected. Default value 3 is taken : Version 2.0.
-!
-.54
-Global Section (Parameter 24) : The Drafting Standard Flag parameter is incorrect (Integer beetween 0 et 7). Default value 3 is taken : No standard.Global Section (Parameter 25) : Last change Date parameter is undefined.
-!
-.55
-Global Section (Parameter 25) : Last change Date parameter is undefined.
-!
-.56
-Global Section (Parameter %d) : The Date parameter is undefined.
-!
-.57
-Global Section (Parameter %d) : Incorrect Date Format.
-!
-.58
-Entity %d : Directory Entry (Field 1) : The Entity Type Number field is incorrect (Expected Integer : %d).
-!
-.59
-Entity %d, Type %d : Directory Entry (Field 3) : The Structure field is undefined.
-!
-.60
-Entity %d, Type %d : Directory Entry (Field 4) : The Line Font Pattern field is incorrect (Pointer or Integer beteween 0 and 5 is expected). Default value 0 is taken.
-!
-.61
-Entity %d, Type %d : Directory Entry (Field 5) : The Level field is incorrect (Pointer or Integer are expected). Default value 0 is taken.
-!
-.62
-Entity %d, Type %d : Directory Entry (Field 6) : The View field is incorrect (Pointer or Zero are expected). Default value 0 is taken.
-!
-.63
-Entity %d, Type %d : Directory Entry (Field 7): The Transformation Matrix field is incorrect (Pointer or Zero are expected). Default value 0 is taken.
-!
-.64
-Entity %d, Type %d : Directory Entry (Field 8): The Label Display Entity field is incorrect (Pointer or Zero are expected). Default value 0 is taken.
-!
-.65
-Entity %d, Type %d : Directory Entry (Champ 9) : The Blank Status field is incorrect (Expected Integer : 0 or 1).
-!
-.66
-Entity %d, Type %d : Directory Entry (Field 9) : The Subordinate Entity Switch field is incorrect (Integer between 0 and 3 is expected).
-!
-.67
-Entity %d, Type %d : Directory Entry (Field 9) : The Entity Use Flag is incorrect (Integer between 0 and 6 is expected).
-!
-.68
-Entity %d, Type %d : Directory Entry (Field 9) : The Hierarchy field is Incorrect (Integer between 0 and 2 is expected).
-!
-.69
-Entity %d, Type %d : Directory Entry (Field 12) : The Line Weight Number is undefined.
-!
-.70
-Entity %d, Type %d : Directory Entry (Field 13) : The Color Number field is incorrect (Pointer or Integer between 0 and 8 is expected).
-!
-.71
-Entity %d, Type %d : Directory Entry (Field 15) : The Form Number field is incorrect.
-!
-.72
-Entity %d, Type %d : Directory Entry (Field 19): The Entity Subscript Number field is incorrect (Integer is expected).
-!Type 116
-.73
-Parameter Data : The parameter %d (Coordinate of Point) is incorrect (Expected Real).
-!Type 116
-.74
-Parameter Data : The parameter %d (Display Symbol) is incorrect (Subfigure Definition Entity, Type 308 is expected).
-!Type 100
-.75
-Parameter Data : The parameter 1 (ZT displacement of Arc) is incorrect (Expected Real).
-!Type 100
-.76
-Parameter Data : The parameter %d (Arc Center) is incorrect (Expected Real).
-!Type 100
-.77
-Parameter Data : The parameter %d (Start Point) is incorrect (Expected Real).
-!Type 100
-.78
-Parameter Data : The parameter %d (Terminate Point) is incorrect (Expected Real).
-!Type 102
-.79
-Parameter Data : The parameter 1 (Number of Entities) is incorrect : %d (Expected Positive Integer).
-!Type 102
-.80
-Parameter Data : Some pointers of the Entity list are null or negative : ignored (Point, Connect Point or Parameterized Curve Entities are expected).Entity %d, Type 104, Form %d : Parameter Data : The parameter %d (Conic Coefficient) is incorrect (Expected Real).
-!Type 104
-.81
-Parameter Data : The parameter %d (Conic Coefficient) is incorrect (Expected Real).
-!Type 104
-.82
-Parameter Data : The parameter 7 (Coordinate of Plane) is incorrect (Expected Real).
-!Type 104
-.83
-Parameter Data : The parameter %d (Starting Point) is incorrect (Expected Real).
-!Type 104
-.84
-Parameter Data : The parameter %d (Terminate Point) is incorrect (Expected Real).
-!Type 106
-.85
-Parameter Data : The parameter 1 (Interpretation Flag) is incorrect (Expected Integer : %d).
-!Type 106
-.86
-Parameter Data : The parameter 2 (Number of n-tuples) is incorrect (Expected Positive Integer).
-!Type 106
-.87
-Parameter Data : The parameter 3 (Common Z Displacement) is incorrect (Expected Real).
-!Type 106
-.88
-Parameter Data : All Data Point parameters are not of Real type.
-!Type 110
-.89
-Parameter Data : The parameter %d (Starting Point) is incorrect (Expected Real).
-!Type 110
-.90
-Parameter Data : The parameter %d (Terminate Point) is incorrect (Expected Real).
-!Type 112
-.91
-Parameter Data : The parameter 1 (Spline Type) is incorrect (Integer between 1 and 6 is expected).
-!Type 112
-.92
-Parameter Data (Parameter 2) : The parameter 2 (Degree of Continuity) is incorrect (Expected Integer).
-!Type 112
-.93
-Parameter Data : The parameter 3 (Number of Dimensions) is incorrect (Expected Integer : 2 or 3).
-!Type 112
-.94
-Parameter Data : The parameter 4 (Number of Segments) is incorrect (Expected Positive Integer).
-!Type 112
-.95
-Parameter Data : All Break Point parameters are not of Real type.
-!Type 112
-.96
-Parameter Data : The entity is planar but the parameters BZ, CZ. DZ are not null.
-!Type 126
-.97
-Parameter Data : The parameter %d (Upper Index of Sum) is incorrect (Expected Positive Integer).
-!Type 126
-.98
-Parameter Data : The parameter %d (Degree of Basis Functions) is incorrect (Expected Integer) : Default value 0 is taken.
-!Type 126
-.99
-Parameter Data : The parameter %d (Planar/Non Planar Flag) is incorrect (Expected Boolean).
-!Type 126
-.100
-Parameter Data : The parameter %d (Open/Closed Flag) is incorrect (Expected Boolean).
-!Type 126
-.101
-Parameter Data : The parameter %d (Rational/Polynomial Flag) is incorrect (Expected Boolean).
-!Type 126
-.102
-Parameter Data : The parameter %d (NonPeriodic/Periodic Flag) is incorrect (Expected Boolean).
-!Type 126
-.103
-Parameter Data : All Knot Sequence parameters are not of Real type.
-!Type 126
-.104
-Parameter Data : All Weight parameters are not of Positive Real type.
-!Type 126
-.105
-Parameter Data : The parameter %d (Control Point) is incorrect (Expected Real).
-!Type 126
-.106
-Parameter Data : The parameter %d (Starting Value) is incorrect (Expected Real).
-!Type 126
-.107
-Parameter Data : The parameter %d (Ending Value) is incorrect (Expected Real).
-!Type 126
-.108
-Parameter Data : The parameter %d (Unit Normal) is incorrect (Expected Real).
-!Type 126
-.109
-Parameter Data : The parameter %d (Unit Normal) is undefined for a planar curve.
-!Type 130
-.110
-Parameter Data : The parameter 1 (Curve Entity to be offset) is incorrect (Curve Entity is expected).
-!Type 130
-.111
-Parameter Data : The parameter 2 (Offset Distance Flag) is incorrect (Integer between 1 and 3 is expected).
-!Type 130
-.112
-Parameter Data : The parameter 3 (Curve Entity whose coordinate describes the offset) is incorrect (Curve Entity is expected).
-!Type 130
-.113
-Parameter Data : The parameter 4 (Particular Coordinate) is incorrect (Expected Integer).
-!Type 130
-.114
-Parameter Data : The parameter 5 (Tapered Offset Type Flag) is incorrect (Expected Integer).ppp
-!Type 130
-.115
-Parameter Data : The parameter 6 (First Offset distance) is incorrect (Expected Real).
-!Type 130
-.116
-Parameter Data : The parameter 7 (Arc Length of First Offset Distance) is incorrect (Expected Real).
-!Type 130
-.117
-Parameter Data : The parameter 8 (Second Offset Distance) is incorrect (Expected Real).
-!Type 130
-.118
-Parameter Data : The parameter 9 (Arc Length of Second Offset Distance) is incorrect (Expected Real).
-!Type 130
-.119
-Parameter Data : The parameter 13 (Offset Curve Starting Parameter Value) is incorrect (Expected Real).
-!Type 130
-.120
-Parameter Data : The parameter 14 (Offset Curve Ending Parameter Value) is incorrect (Expected Real).
-!Type 130
-.121
-Parameter Data : The parameter %d (Unit Vector Normal to plane) is incorrect (Expected Real).
-!Type 141
-.122
-Parameter Data : The parameter 1 (Type of Bounded Surface Representation) is incorrect (Expected Integer : 0 or 1).
-!Type 141
-.123
-Parameter Data : The parameter 2 (Trimming Curves Representation) is incorrect (Integer between 0 and 3 is expected).
-!Type 141
-.124
-Parameter Data : The parameter 3 (Untrimmed Surface) is incorrect (Untrimmed Surface Entity is expected).
-!Type 141
-.125
-Parameter Data : Not parametric Surface %d (parameter 3).
-!Type 141
-.126
-Parameter Data : The parameter 4 (Number of Curves) is incorrect (Expected positive).
-!Type 141
-.127
-Parameter Data : The parameter 5 (Model Space Curve) is incorrect (Curve Entity is expected).
-!Type 141
-.128
-Parameter Data (Parameter 6) : The Orientation Flag parameter is incorrect (Expected Integer : 1 or 2).
-!Type 141
-.129
-Parameter Data : The parameter 7 (Number of Associated Parameter Space Curves) is incorrect (Expected Integer : 0).
-!Type 141
-.130
-Parameter Data : Some pointers of the Parameter Space Curve list are null or negative : ignored (Curve Entities are expected).
-!Type 142
-.131
-Parameter Data : The parameter 2 (Surface on which the curve lies) is incorrect (Surface Entity is expected).
-!Type 142
-.132
-Parameter Data : Le parameter 3 (Curve 2D) is incorrect (Curve Entity is expected).
-!Type 142
-.133
-Parameter Data : Le parameter 4 (Curve 3D) is incorrect (Curve Entity is expected).
-!Type 142
-.134
-Parameter Data : The pointers of Curve 2D and 3D are null (parameter 3 and 4) (Curve Entities are expected).
-!Type 108
-.135
-Parameter Data : The parameter %d (Coefficient Of Plane) is incorrect (Expected Real).
-!Type 108
-.136
-Parameter Data : Le parameter 5 (Closed Curve) is incorrect (Curve Entity is expected).
-!Type 108
-.137
-Parameter Data : The parameter 5 (Expected Null pointer when the Form Number field is 0).
-!Type 108
-.138
-Parameter Data : The parameter 9 (Display Symbol Size) is incorrect (Expected Real).
-!Type 108
-.139
-Parameter Data : The parameter %d (Coordinate of Display Symbol) is incorrect (Expected Real).
-!Type 114
-.140
-Parameter Data : The parameter 1 (Spline Boundary Type) is incorrect (Integer between 1 and 6 is expected).
-!Type 114
-.141
-Parameter Data : The parameter 3 (Number of U Segments) is incorrect (Expected Positive Integer).
-!Type 114
-.142
-Parameter Data : Le parameter 4 (Number of V Segments) is incorrect (Expected Positive Integer).
-!Type 114
-.143
-Parameter Data : All Breakpoint in U parameters are not of Real type.
-!Type 114
-.144
-Parameter Data : All Breakpoint in V parameters are not of Real type.
-!Type 114
-.145
-Parameter Data : All %s Coefficient of Patch parameter(s) are not of Real type.
-!Type 114
-.146
-Parameter Data : The parameter %d (Last Z Coefficient of Patch) is incorrect (Expected Real).
-!Type 114
-.147
-Parameter Data : The %s Coefficient of Patch parameters are incorrect (Expected Integer : 16).
-!Type 118
-.148
-Parameter Data : Le parameter 1 (First Curve) is incorrect (Curve Entity is expected).
-!Type 118
-.149
-EParameter Data : Le parameter 2 (Second Curve) is incorrect (Curve Entity is expected).
-!Type 118
-.150
-Parameter Data : The parameter 3 (Direction Flag) is incorrect (Integer 0 or 1 is expected).
-!Type 118
-.151
-Parameter Data : The parameter 4 (Developable Surface Flag) is incorrect (Integer 0 or 1 is expected).
-!Type 120
-.152
-Parameter Data : The parameter 1 (Axis of Revolution) is incorrect (Expected entity).
-!Type 120
-.153
-Parameter Data : The parameter 2 (Generatrix Entity) is incorrect (Expected Entity).
-!Type 120
-.154
-Parameter Data : The parameter 3 (Start Angle) is incorrect (Expected Real).
-!Type 120
-.155
-Parameter Data : The parameter 4 (Terminate Angle) is incorrect (Expected Real)
-!Type 122
-.156
-Parameter Data : The parameter 1 (Generatrix Entity) is incorrect (Expected Curve Entity).
-!Type 122
-.157
-Parameter Data : The parameter %d (Coordinate of the Terminate Point) is incorrect (Expected Real).
-!Type 128
-.158
-Parameter Data : Incorrect Additional value (Expected Real).
-!Type 128
-.159
-Parameter Data : Additional Real value : ignored.
-!Type 128
-.160
-Parameter Data : Invalid Number of First Knots sequence (Expected number : %d).
-!Type 128
-.161
-Parameter Data : Invalid Number of Second Knots sequence (Expected number : %d).
-!Type 140
-.162
-Parameter Data : The parameter %d (Coordinate of Offset Indicator) is incorrect (Expected Real).
-!Type 140
-.163
-Parameter Data : The parameter 4 (Offset Distance) is incorrect (Expected Real).
-!Type 140
-.164
-Parameter Data : The parameter 5 (Surface Entity to be offset) is incorrect (Expected Surface Entity).
-!Type 143
-.165
-Parameter Data : The parameter 1 (Bounded Surface Representation Type) is incorrect (Integer 0 or 1 is expected).
-!Type 143
-.166
-Parameter Data : Le parameter 2 (Surface Entity to be Bounded) is incorrect (Surfacey Entity is expected).
-!Type 143
-.167
-Parameter Data : The parameter 3 (Number of Boundary Entities) is incorrect (Expected Positive Integer).
-!Type 143
-.168
-Parameter Data : The parameter %d (Boudary Entity) is incorrect (Boundary Entity, Type 141 is expected).
-!Type 144
-.169
-Parameter Data : The parameter 1 (Surface to be trimmed) is incorrect (Surface Entity is expected).
-!Type 144
-.170
-Parameter Data : The parameter 2 (Outer Boundary Type) is incorrect (Integer 0 or 1 is expected).
-!Type 144
-.171
-Parameter Data : The parameter 3 (Number of Inner Boundary Closed Curves) is incorrect (Expected Positive Integer).
-!Type 144
-.172
-Parameter Data : The parameter 4 (Outer Boundary) is incorrect (Curve on a Parametric Surface Entity, Type 142 is expected).
-!Type 144
-.173
-Parameter Data : The parameter %d (Inner Boundary) is incorrect (Curve on a Parametric Surface Entity, Type 142 is expected).
-!Type 190
-.174
-Parameter Data : The parameter 1 (Point on the Surface) is incorrect (Point Entity, Type 116 is expected).
-!Type 190
-.175
-Parameter Data : The parameter 2 ( Surface Normal Direction) is incorrect (Direction Entity is expected).
-!Type 190
-.176
-Parameter Data : The parameter 3 (Reference Direction) is incorrect (Direction Entity is expected).
-!Type 190
-.177
-Parameter Data : The parameter 3 (Null pointer is expected when the Form Number field is 1).
-!Type 186
-.178
-Parameter Data : The parameter 1 (Shell) is incorrect (Closed Shell Entity, Type 514, Form 1 is expected).
-!Type 186
-.179
-Parameter Data : The parameter %d (Void Shell) is incorrect (Closed Shell Entity, Type 514, Form 1 is expected).
-!Type 186
-.180
-Parameter Data : The parameter %d (Orientation Flag) is incorrect (Expected Boolean).
-!Type 186
-.181
-Parameter Data : The parameter 3 (Number of Void Shells) is incorrect (Expected Positive Integer)
-!Type 502
-.182
-Parameter Data : The parameter 1 (Number of Vertex Tuples) is incorrect (Expected Positive Integer).
-!Type 502
-.183
-Parameter Data : The parameter %d (Coordinate of Vertex) is incorrect (Expected Real).
-!Type 504
-.184
-Parameter Data : The parameter 1 (Number of Edge Tuples) is incorrect (Expected Positive Integer).
-!Type 504
-.185
-Parameter Data : The parameter 2 (Model Space Curve) is incorrect (Curve Entity is expected).
-!Type 504
-.186
-Parameter Data : The parameter %d (Start Vertex Index) is incorrect (Expected Integer).
-!Type 504
-.187
-Parameter Data : The parameter %d (Terminate Vertex Index) is incorrect (Expected Integer).
-!Type 504
-.188
-Entity %d, Type 504 : Parameter Data : The parameter %d (Start Vertex List Entity) is incorrect (Vertex List Entity, Type 502 is expected).
-!Type 504
-.189
-Entity %d, Type 504 : Parameter Data : The parameter %d (Terminate Vertex List Entity) is incorrect (Vertex List Entity, Type 502 is expected).
-!Type 508
-.190
-Parameter Da ta : The parameter %d (Edge Type) is incorrect (Integer 0 or 1 is expected).
-!Type 508
-.191
-Parameter Data : The parameter %d (List Index) is incorrect (Expected Integer).
-!Type 508
-.192
-Parameter Data : The parameter %d (Number of Parameter Curves) is incorrect (Expected Positive Integer).
-!Type 508
-.193
-Parameter Data : The parameter %d (Vertex or Edge List Entity) is incorrect (Vertex List or Edge List Entity, Type 502 or 504 is expected).
-!Type 508
-.194
-Parameter Data : The parameter %d (Parameter Space Curve) is incorrect (Curve Entity is expected).
-!Type 508
-.195
-Parameter Data : The parameter %d (Isoparametric Flag) is incorrect (Expected Boolean).
-!Type 510
-.196
-Parameter Data : The parameter 1 (Surface) is incorrect (Surface Entity is expected).
-!Type 510
-.197
-Parameter Data : The parameter 2 (Number of Loops) is incorrect (Expected Positive Integer).
-!Type 510
-.198
-Parameter Data : The parameter 3 (Outer Loop flag) is incorrect (Expected Boolean).
-!Type 510
-.199
-Parameter Data : The parameter %d (Loop of the Face) is incorrect (Loop Entity, Type 508 is expected).
-!Type 514
-.200
-Parameter Data : The parameter 1 (Number of Faces) is incorrect (Expected Positive Integer).
-!Type 514
-.201
-Parameter Data : The parameter 2 (Face) is incorrect (Face Entity, Type 510 is expected).
-!Type 402, Form 1 or 7
-.202
-Form %d : Parameter Data : The parameter 1 (Number of Entries) is incorrect (Expected Integer).
-!Type 402, Form 1 or 7
-.203
-Form %d : Parameter Data : Some pointers of the Entity list are nul or negative : ignored (Entities are expected).
-!Type 402
-.204
-Form 9 : Parameter Data : The parameter 1 (Number of Parent Entity) is incorrect (Expected Integer : 1).
-!Type 402
-.205
-Form 9 : Parameter Data : The parameter 2 (Number of Children) is incorrect (Expected Positive Integer).
-!Type 402
-.206
-Form 9 : Parameter Data : The parameter 3 (Parent Entity) is incorrect (Entity expected).
-!Type 402
-.207
-Form 9 : Parameter Data : Some pointers of the Child Entity List are null or negative : ignored (Entities are expected).
-!Type 308
-.208
-Parameter Data : The parameter 1 (Depth of Subfigure) is incorrect (Expected Integer).
-!Type 308
-.209
-Parameter Data : The parameter 2 (Subfigure Name) is incorrect : %s (Expected String in hollerith Form).
-!Type 308
-.210
-Parameter Data : The parameter 3 (Number of Entities) is incorrect (Expected Positive Integer).
-!Type 308
-.211
-Parameter Data : Some pointers of the Associated Entity List are null or negative : ignored (Entities are expected).
-!Type 408
-.212
-Parameter Data : The parameter 1 (Subfigure definition entity) is incorrect (Subfigure definition entity, Type 308 expected).
-!Type 408
-.213
-Parameter Data : The parameter %d (Translation data) is incorrect (Expected Real).
-!Type 408
-.214
-Parameter Data : The parameter 5 (Scale Factor) is incorrect (Expected Real). Default value 1.0 is taken.
-!Type 124
-.215
-Parameter Data : All parameters are not of Real type.
-!
-.216
-Null reference.
-!
-.217
-Null entity.
-!
-.218
-Incorrect Type.
-!
-.219
-Negative pointer.
-!ADDED MESSAGES
-.220
-Number of associativities is incorrect (Expected integer).
-!
-.221
-Number of properties is incorrect (Expected integer).
-
-!TRANSLATION PHASE
-.222
-Entity %s, Type %d : The entity points to an invalid object : Halt of the entity translation.
-!
-.223
-Entity %s, Type %d : The resulting edge is not Same Parameter.
-!
-.224
-Entity %s, Type %d : Software error : Halt of the translation entity.
-!
-.225
-Entity %s, Type %d : Entity is empty.
-!
-.226
-Entity %s, Type %d : Directory Entry (Parameter 7) : Transformation Matrix entity points to an invalid object.
-!
-.227
-Entity %s, Type %d : Entities Type 116 or 132 cannot appear consecutively in the Entity Type 102.
-!
-.228
-Entity %s, Type %d : Reference to illegal entity type %d.
-!
-.229
-Entity %s, Type %d : The curve has been reversed.
-!
-.230
-Entity %s, Type %d : The curve was lightly disconnected : repaired.
-!
-.231
-Entity %s, Type %d : The curve was too much disconnected : impossible reparation.
-!
-.232
-Entity %s, Type %d : The Entity is not closed
-!
-.233
-Entity %s, Type %d : Software error : Invalid 2D curve, recomputed from 3D curve.
-!
-.234
-Entity %s, Type %d : Software error : Invalid 3D curve, recomputed from 2D curve.
-!
-.235
-Entity %s, Type %d : Software error : Invalid 2D and 3D curves.
-!
-.236
-Entity %s, Type %d : The entity was self-intersecting, repaired.
-!
-.237
-Entity %s, Type %d : Parameter Data : The parameter 2 (Offset distance flag) different from 1 is not implemented.
-!
-.238
-Entity %s, Type %d : Incorrect curve length with regard to parameter 14 (Offset curve ending) of the entity %s Type %d.
-!
-.239
-Entity %s, Type %d : B-Spline curve of continuity C0 cannot be splitted into C1 curves. Result is null.!
-!
-.240
-Entity %s, Type %d : B-Spline curve of continuity C0 was splitted into C1 curves.
-!
-.241
-Entity %s, Type %d : Parameter Data : The parameter 1 (Type of bounded surface representation = 0) is not implemented.
-!
-.242
-Entity %s, Type %d : Not implemented entity.
-!
-.243
-Entity %s, Type %d :Parameter Data : (Parametesr 1 to 6) The coefficients don't satisfy the conic equation.
-!
-.244
-Entity %s, Type %d : Parameter Data (Parameters 8 to 11) : Start and terminate coordinates of the arc are the same.
-!
-.245
-Entity %s, Type %d : Transformation will not be applied to 2D object.
-!
-.246
-Entity %s, Type %d : Parameter Data : The parameter 4 (Number of segments) is less than 1.
-!
-.247
-Entity %s, Type %d : Polynomial equation is not correct.
-!
-.248
-Entity %s, Type %d : Error during creation of control points.
-!
-.249
-Entity %s, Type %s : Parameter Data : The parameter 1 (Spline type > 3) is not implemented.
-!
-.250
-Entity %s, Type %d : The result is not guaranteed to be C0.
-!
-.251
-Entity %s, Type %d : Parameter Data : The parameter 2 (Degree of basis functions) is less than 0 or greater than maximum degree.
-!
-.252
-Entity %s, Type %d : Parameter Data : Incorrect number of points (2 or more are expected).
-!
-.253
-Entity %s, Type %d : Translation error : %sStarting multiplicity > %s degree + 1.
-!
-.254
-Entity %s, Type %d : Translation error : %s Ending multiplicity > %s degree + 1.
-!
-.255
-Entity %s, Type %d : %sMultiplicity of knot %d > %s degree, repaired
-!
-.256
-Entity %s, Type %d : Sum of %smultiplicities is not equal to the sum (number of poles + %sdegree + 1).
-!
-.257
-Entity %s, Type %d : All weights are not positive.
-!
-.258
-Entity %s, Type %d : The entity is polynomial.
-!
-.259
-Entity %s, Type %d : Start point and Terminate point of the %sline are the same.
-!
-.260
-Entity %s, Type %d, Form %d : The vector is ignored.
-!
-.261
-Entity %s, Type %d : Resulting surface is C0-continuous.
-!
-.262
-Entity %s, Type %d : Basis surface is C0 continious and is translated to the shell. Only the first face in the shell is offset.
-!
-.263
-Entity %s, Type %d : The entity points to an invalid object, ignored.
-!
-.264
-Entity %s, Type %d : The entity could not be translated, ignored.
-!
-.265
-Entity %s, Type %d : The entity is not coplanar to the entity %s, Type %d.
-!
-.266
-Entity %s, Type %d : Parameter Data : The parameter 3 or 4 (Number of U or V segments) is less than 1.
-!
-.267
-Entity %s, Type %d : Parameter Data : The parameter 3 or 4 (Degree of first or second basis functions) is less than 0 or greater than maximum degree.
-!
-.268
-Entity %s, Type %d : Parameter Data : Number of XYZ coordinates of control points (%s direction) is less than 2.
-!
-.269
-Entity %s, Type %d : Control points construction error. Result is null.
-!
-.270
-Entity %s, Type %d : Software error during translation of the Vertex number %d.
-!
-.271
-Entity %s, Type %d : Translation result of the entity is not implemented.
-!
-.272
-Beginning of the "Analysis" phase of the IGES file %s.
-!
-.273
-End of the "Analysis" phase of the IGES file %s (Elapsed time : %s)..
-!
-.274
-Beginning of the "Translation" phase of the IGES file %s.
-!
-.275
-End of the "Translation" phase of the IGES file %s (Elapsed time : %s)..
projects / occt.git / blobdiff