}
#include<BRepAlgoAPI_Cut.hxx>
-#include<BRepAlgo_Cut.hxx>
#include<BRepPrimAPI_MakeHalfSpace.hxx>
#include<Geom_CartesianPoint.hxx>
static Standard_Integer OCC297 (Draw_Interpretor& di,Standard_Integer /*argc*/, const char ** argv )
{
-
Handle(AIS_InteractiveContext) myAISContext = ViewerTest::GetAISContext();
- if(myAISContext.IsNull()) {
+ if (myAISContext.IsNull()) {
di << "use 'vinit' command before " << argv[0] << "\n";
return -1;
}
+
+ gp_Pnt pt1_(250., 250., 0.);
+ gp_Pnt pt2_(-250., 250., 0.);
+ gp_Pnt pt3_(-250., -250., 0.);
+ gp_Pnt pt4_(250., -250., 0.);
+ BRepBuilderAPI_MakeEdge edg1_(pt1_, pt2_);
+ BRepBuilderAPI_MakeEdge edg2_(pt2_, pt3_);
+ BRepBuilderAPI_MakeEdge edg3_(pt3_, pt4_);
+ BRepBuilderAPI_MakeEdge edg4_(pt4_, pt1_);
+
+ BRepBuilderAPI_MakeWire wire_(edg1_, edg2_, edg3_, edg4_);
+ BRepBuilderAPI_MakeFace face_(wire_);
+ TopoDS_Face sh_ = face_.Face();
+
+ int up = 1;
+
+ gp_Pnt g_pnt;
+ if (up)
+ g_pnt = gp_Pnt(0, 0, -100);
+ else
+ g_pnt = gp_Pnt(0, 0, 100);
+ myAISContext->EraseAll(Standard_False);
+ Handle(Geom_CartesianPoint) GEOMPoint = new Geom_CartesianPoint(g_pnt);
+ Handle(AIS_Point) AISPoint = new AIS_Point(GEOMPoint);
+ myAISContext->Display(AISPoint, Standard_True);
- gp_Pnt pt1_(250.,250.,0.);
- gp_Pnt pt2_(-250.,250.,0.);
- gp_Pnt pt3_(-250.,-250.,0.);
- gp_Pnt pt4_(250.,-250.,0.);
- BRepBuilderAPI_MakeEdge edg1_(pt1_, pt2_);
- BRepBuilderAPI_MakeEdge edg2_(pt2_, pt3_);
- BRepBuilderAPI_MakeEdge edg3_(pt3_, pt4_);
- BRepBuilderAPI_MakeEdge edg4_(pt4_, pt1_);
-
- BRepBuilderAPI_MakeWire wire_(edg1_, edg2_, edg3_, edg4_);
- BRepBuilderAPI_MakeFace face_(wire_);
- TopoDS_Face sh_ = face_.Face();
-
- int up = 1;
-
- gp_Pnt g_pnt;
- if(up)
- g_pnt = gp_Pnt(0,0,-100);
- else
- g_pnt = gp_Pnt(0,0,100);
-
- myAISContext->EraseAll(Standard_False);
- Handle(Geom_CartesianPoint) GEOMPoint = new Geom_CartesianPoint(g_pnt);
- Handle(AIS_Point) AISPoint = new AIS_Point(GEOMPoint);
- myAISContext->Display (AISPoint, Standard_True);
-
- BRepPrimAPI_MakeHalfSpace half_(sh_, g_pnt);
- TopoDS_Solid sol1_ = half_.Solid();
-// Handle(AIS_Shape) AISHalf = new AIS_Shape(sol1_);
-// AISHalf->SetColor(Quantity_NOC_GREEN);
-// myAISContext->Display(AISHalf);
-
- DBRep::Set("Face",sol1_);
-
- gp_Ax1 ax1_(gp_Pnt(0., 0., -100.), gp_Dir(0., 0., 1.));
+ BRepPrimAPI_MakeHalfSpace half_(sh_, g_pnt);
+ TopoDS_Solid sol1_ = half_.Solid();
- Standard_Real x=0., y=0., z=-80.;
+ DBRep::Set("Face", sol1_);
- BRepPrimAPI_MakeBox box(gp_Pnt(x,y,z),gp_Pnt(x+150,y+200,z+200));
-// Handle(AIS_Shape) AISBox = new AIS_Shape(box);
-// AISBox->SetColor(Quantity_NOC_BLUE1);
-// myAISContext->Display(AISBox);
+ gp_Ax1 ax1_(gp_Pnt(0., 0., -100.), gp_Dir(0., 0., 1.));
- DBRep::Set("Box",box.Shape());
+ Standard_Real x = 0., y = 0., z = -80.;
-// BRepAlgoAPI_Cut cut( sol1_, box.Shape() );
-// //BRepAlgoAPI_Cut cut( box.Shape(), sol1_ );
-// TopoDS_Shape sh1_ = cut.Shape();
-// Handle(AIS_Shape) AISCut = new AIS_Shape(sh1_);
-// AISCut->SetColor(Quantity_NOC_RED);
-// myAISContext->Display(AISCut);
+ BRepPrimAPI_MakeBox box(gp_Pnt(x, y, z), gp_Pnt(x + 150, y + 200, z + 200));
-// DBRep::Set("Cut",sh1_);
+ DBRep::Set("Box", box.Shape());
return 0;
}
+
#include<GProp_GProps.hxx>
#include<BRepGProp.hxx>
#include <BRepAlgoAPI_Fuse.hxx>
#include <BRepAlgoAPI_Common.hxx>
-#include <BRepAlgo_Fuse.hxx>
-#include <BRepAlgo_Common.hxx>
static Standard_Integer OCC277bug (Draw_Interpretor& di, Standard_Integer nb, const char ** a)
{
- //if (nb != 1) {
- // cout << "Usage: " << a[0] << endl;
- // return 1;
- //}
- if(nb < 1 || nb > 2) {
- di << "Usage : " << a[0] << " [BRepAlgoAPI/BRepAlgo = 1/0]\n";
+ if(nb != 1) {
+ di << "Usage : " << a[0] << "\n";
return 1;
}
- Standard_Boolean IsBRepAlgoAPI = Standard_True;
- if (nb == 2) {
- Standard_Integer IsB = Draw::Atoi(a[1]);
- if (IsB != 1) {
- IsBRepAlgoAPI = Standard_False;
- }
- }
BRepPrimAPI_MakeBox box1( 100, 100, 100 );
BRepPrimAPI_MakeBox box2( gp_Pnt( 50, 50,50 ), 200, 200, 200 );
TopoDS_Shape shape1 = box1.Shape();
TopoDS_Shape shape2 = box2.Shape();
-//#if ! defined(BRepAlgoAPI_def01)
-// TopoDS_Shape fuse = BRepAlgoAPI_Fuse( shape1, shape2 );
-// TopoDS_Shape comm = BRepAlgoAPI_Common( shape1, shape2 );
-//#else
-// TopoDS_Shape fuse = BRepAlgo_Fuse( shape1, shape2 );
-// TopoDS_Shape comm = BRepAlgo_Common( shape1, shape2 );
-//#endif
TopoDS_Shape fuse,comm;
- if (IsBRepAlgoAPI) {
- di << "fuse = BRepAlgoAPI_Fuse( shape1, shape2 )\n";
- di << "comm = BRepAlgoAPI_Common( shape1, shape2 )\n";
- fuse = BRepAlgoAPI_Fuse( shape1, shape2 );
- comm = BRepAlgoAPI_Common( shape1, shape2 );
- } else {
- di << "fuse = BRepAlgo_Fuse( shape1, shape2 )\n";
- fuse = BRepAlgo_Fuse( shape1, shape2 );
- di << "comm = BRepAlgo_Common( shape1, shape2 )\n";
- comm = BRepAlgo_Common( shape1, shape2 );
- }
+ di << "fuse = BRepAlgoAPI_Fuse( shape1, shape2 )\n";
+ di << "comm = BRepAlgoAPI_Common( shape1, shape2 )\n";
+ fuse = BRepAlgoAPI_Fuse(shape1, shape2).Shape();
+ comm = BRepAlgoAPI_Common(shape1, shape2).Shape();
return 0;
}
#include <gce_MakeTranslation.hxx>
#include <BRepBuilderAPI_Transform.hxx>
#include <BRepPrimAPI_MakeWedge.hxx>
-#include <BRepAlgoAPI_Fuse.hxx>
-#include <BRepAlgoAPI_Cut.hxx>
-#include <BRepAlgo_Fuse.hxx>
-#include <BRepAlgo_Cut.hxx>
//=======================================================================
//function : OCC578
//purpose :
//=======================================================================
static Standard_Integer OCC578 (Draw_Interpretor& di, Standard_Integer argc, const char ** argv)
{
- //if (argc!=4) {
- // di<<"Usage : " << argv[0] << " shape1 shape2 shape3\n";
- // return 1;
- //}
- if(argc < 4 || argc > 5) {
- di << "Usage : " << argv[0] << " shape1 shape2 shape3 [BRepAlgoAPI/BRepAlgo = 1/0]\n";
+ if(argc != 4) {
+ di << "Usage : " << argv[0] << " shape1 shape2 shape3\n";
return 1;
}
- Standard_Boolean IsBRepAlgoAPI = Standard_True;
- if (argc == 5) {
- Standard_Integer IsB = Draw::Atoi(argv[4]);
- if (IsB != 1) {
- IsBRepAlgoAPI = Standard_False;
-// di << "Error: There is not BRepAlgo_Fuse class\n";
-// return 1;
-// di << "Error: There is not BRepAlgo_Cut class\n";
-// return 1;
- }
- }
gp_Pnt P0(0,0,0.0);
double xperiod = 1.0;
// combine wedges
-//#if ! defined(BRepAlgoAPI_def01)
-// TopoDS_Shape wedge_common = BRepAlgoAPI_Fuse(wedge1a , wedge2a);
-//#else
-// TopoDS_Shape wedge_common = BRepAlgo_Fuse(wedge1a , wedge2a);
-//#endif
- TopoDS_Shape wedge_common;
- if (IsBRepAlgoAPI) {
- di << "wedge_common = BRepAlgoAPI_Fuse(wedge1a , wedge2a)\n";
- wedge_common = BRepAlgoAPI_Fuse(wedge1a , wedge2a);
- } else {
- di << "wedge_common = BRepAlgo_Fuse(wedge1a , wedge2a)\n";
- wedge_common = BRepAlgo_Fuse(wedge1a , wedge2a);
- }
-
- // remove wedge area from substrate
-//#if ! defined(BRepAlgoAPI_def01)
-// TopoDS_Shape sub_etch1 = BRepAlgoAPI_Cut(substrate, wedge_common);
-//#else
-// TopoDS_Shape sub_etch1 = BRepAlgo_Cut(substrate, wedge_common);
-//#endif
- TopoDS_Shape sub_etch1;
- if (IsBRepAlgoAPI) {
- di << "sub_etch1 = BRepAlgoAPI_Cut(substrate, wedge_common)\n";
- sub_etch1 = BRepAlgoAPI_Cut(substrate, wedge_common);
- } else {
- di << "sub_etch1 = BRepAlgo_Cut(substrate, wedge_common)\n";
- sub_etch1 = BRepAlgo_Cut(substrate, wedge_common);
- }
+ di << "wedge_common = BRepAlgoAPI_Fuse(wedge1a , wedge2a)\n";
+ TopoDS_Shape wedge_common = BRepAlgoAPI_Fuse(wedge1a , wedge2a).Shape();
+ di << "sub_etch1 = BRepAlgoAPI_Cut(substrate, wedge_common)\n";
+ TopoDS_Shape sub_etch1 = BRepAlgoAPI_Cut(substrate, wedge_common).Shape();
+
if (sub_etch1.IsNull()) {
di<<" Null shape3 is not allowed\n";
return 1;
return 1;
}
-#include<BRepAlgoAPI_Cut.hxx>
-#include<BRepAlgo_Cut.hxx>
//=======================================================================
//function : OCC1487
//purpose :
//=======================================================================
static Standard_Integer OCC1487 (Draw_Interpretor& di, Standard_Integer argc, const char ** argv)
{
- //if(argc != 5) {
- // cerr << "Usage : " << argv[0] << " CylinderVariant(=1/2) cylinder1 cylinder2 cutshape" << endl;
- // return -1;
- //}
- if(argc < 5 || argc > 6) {
- di << "Usage : " << argv[0] << " CylinderVariant(=1/2) cylinder1 cylinder2 cutshape [BRepAlgoAPI/BRepAlgo = 1/0]\n";
+ if(argc != 5) {
+ di << "Usage : " << argv[0] << " CylinderVariant(=1/2) cylinder1 cylinder2 cutshape\n";
return 1;
}
- Standard_Boolean IsBRepAlgoAPI = Standard_True;
- if (argc == 6) {
- Standard_Integer IsB = Draw::Atoi(argv[5]);
- if (IsB != 1) {
- IsBRepAlgoAPI = Standard_False;
-// di << "Error: There is not BRepAlgo_Cut class\n";
-// return 1;
- }
- }
Standard_Integer CaseNumber = Draw::Atoi(argv[1]);
BRepPrimAPI_MakeCylinder o_mc2 (myAx2_mc2, 5, 150);
cyl2 = o_mc2.Shape();
-//#if ! defined(BRepAlgoAPI_def01)
-// o_cut_shape = BRepAlgoAPI_Cut (o_mc1.Solid (), o_mc2.Solid ());
-//#else
-// o_cut_shape = BRepAlgo_Cut (o_mc1.Solid (), o_mc2.Solid ());
-//#endif
- if (IsBRepAlgoAPI) {
- di << "o_cut_shape = BRepAlgoAPI_Cut (o_mc1.Solid (), o_mc2.Solid ())\n";
- o_cut_shape = BRepAlgoAPI_Cut (o_mc1.Solid (), o_mc2.Solid ());
- } else {
- di << "o_cut_shape = BRepAlgo_Cut (o_mc1.Solid (), o_mc2.Solid ())\n";
- o_cut_shape = BRepAlgo_Cut (o_mc1.Solid (), o_mc2.Solid ());
- }
+ di << "o_cut_shape = BRepAlgoAPI_Cut (o_mc1.Solid (), o_mc2.Solid ())\n";
+ o_cut_shape = BRepAlgoAPI_Cut (o_mc1.Solid (), o_mc2.Solid ()).Shape();
} else {
//BRepPrimAPI_MakeCylinder o_mc2 (gp_Ax2 (gp_Pnt(978.34936, -50.0, 127.5),gp_Dir(sin(M_PI/3), 0.0, 0.5)), 5, 150);
gp_Dir myDir_mc2(sin(M_PI/3), 0.0, 0.5);
BRepPrimAPI_MakeCylinder o_mc2 (myAx2_mc2, 5, 150);
cyl2 = o_mc2.Shape();
-//#if ! defined(BRepAlgoAPI_def01)
-// o_cut_shape = BRepAlgoAPI_Cut (o_mc1.Solid (), o_mc2.Solid ());
-//#else
-// o_cut_shape = BRepAlgo_Cut (o_mc1.Solid (), o_mc2.Solid ());
-//#endif
- if (IsBRepAlgoAPI) {
- di << "o_cut_shape = BRepAlgoAPI_Cut (o_mc1.Solid (), o_mc2.Solid ())\n";
- o_cut_shape = BRepAlgoAPI_Cut (o_mc1.Solid (), o_mc2.Solid ());
- } else {
- di << "o_cut_shape = BRepAlgo_Cut (o_mc1.Solid (), o_mc2.Solid ())\n";
- o_cut_shape = BRepAlgo_Cut (o_mc1.Solid (), o_mc2.Solid ());
- }
+ di << "o_cut_shape = BRepAlgoAPI_Cut (o_mc1.Solid (), o_mc2.Solid ())\n";
+ o_cut_shape = BRepAlgoAPI_Cut (o_mc1.Solid (), o_mc2.Solid ()).Shape();
}
DBRep::Set(argv[2],cyl1);
TopoDS_Shape ShapeCut = aBoolenaOperation.Shape();
-//#ifdef OCC40
-// Handle(TopOpeBRepBuild_HBuilder) build = aBoolenaOperation.Builder();
-//#endif
TopTools_ListIteratorOfListOfShape its;
TopoDS_Compound result;
BRepFilletAPI_MakeFillet fill(cutsol);
fill.SetParams(ta, t3d, t2d, t3d, t2d, fl);
fill.SetContinuity(blend_cont, tapp_angle);
-//#ifdef OCC40
-// its = build->Section();
-//#else //OCC40DEV
its = aBoolenaOperation.SectionEdges();
-//#endif
while (its.More())
{
TopoDS_Edge E = TopoDS::Edge(its.Value());
static Standard_Integer OCC7141 (Draw_Interpretor& di, Standard_Integer argc, const char ** argv)
{
- int nCount = 10;
-
- if (argc > 3)
- {
- di << "Usage : " << argv[0] << " [nCount] path\n";
- return 1;
- }
+ if (argc != 2 && argc != 3)
+ {
+ std::cout << "Usage : " << argv[0] << " [nCount] path\n";
+ return 1;
+ }
- if (argc > 2)
- nCount = Draw::Atoi(argv[1]);
- TCollection_AsciiString aFilePath = argv[2];
+ int nCount = (argc > 2 ? Draw::Atoi(argv[1]) : 10);
+ TCollection_AsciiString aFilePath (argv[argc > 2 ? 2 : 1]);
STEPCAFControl_Writer writer;
Handle(TDocStd_Document) document;
document = new TDocStd_Document("Pace Test-StepExporter-");
theCommands.Add("OCC310","OCC310", __FILE__, OCC310bug, group);
//theCommands.Add("OCC277","OCC277", __FILE__, OCC277bug, group);
- theCommands.Add("OCC277","OCC277 [BRepAlgoAPI/BRepAlgo = 1/0]", __FILE__, OCC277bug, group);
+ theCommands.Add("OCC277","OCC277", __FILE__, OCC277bug, group);
theCommands.Add("OCC333","OCC333 edge1 edge2 [toler domaindist]; Check overlapping edges", __FILE__, OCC333bug, group);
theCommands.Add("OCC524", "OCC524 LowerVector UpperVector InitialValueVector LowerRowMatrix UpperRowMatrix LowerColMatrix UpperColMatrix InitialValueMatrix", __FILE__, OCC524, group);
theCommands.Add("OCC525", "OCC525", __FILE__, OCC525, group);
//theCommands.Add("OCC578", "OCC578 shape1 shape2 shape3", __FILE__, OCC578, group);
- theCommands.Add("OCC578", "OCC578 shape1 shape2 shape3 [BRepAlgoAPI/BRepAlgo = 1/0]", __FILE__, OCC578, group);
+ theCommands.Add("OCC578", "OCC578 shape1 shape2 shape3", __FILE__, OCC578, group);
theCommands.Add("OCC669", "OCC669 GUID", __FILE__, OCC669, group);
theCommands.Add("OCC738_ShapeRef", "OCC738_ShapeRef", __FILE__, OCC738_ShapeRef, group);
theCommands.Add("OCC738_Assembly", "OCC738_Assembly", __FILE__, OCC738_Assembly, group);
theCommands.Add ("OCC1034_AISSelectionMode", "OCC1034_AISSelectionMode (DOC, entry, [selectionmode])", __FILE__, OCC1034_AISSelectionMode, group);
//theCommands.Add("OCC1487", "OCC1487 CylinderVariant(=1/2) cylinder1 cylinder2 cutshape", __FILE__, OCC1487, group);
- theCommands.Add("OCC1487", "OCC1487 CylinderVariant(=1/2) cylinder1 cylinder2 cutshape [BRepAlgoAPI/BRepAlgo = 1/0]", __FILE__, OCC1487, group);
+ theCommands.Add("OCC1487", "OCC1487 CylinderVariant(=1/2) cylinder1 cylinder2 cutshape", __FILE__, OCC1487, group);
theCommands.Add("OCC1077", "OCC1077 result", __FILE__, OCC1077, group);
theCommands.Add("OCC5739", "OCC5739 name shape step", __FILE__, OCC5739_UniAbs, group);
projects / occt.git / blobdiff