//! Raised if FromK1 or ToK2 are out of the bounds
//! [FirstUKnotIndex, LastUKnotIndex]
//! Raised if FromK1 = ToK2
- Standard_EXPORT static Handle(Geom2d_BSplineCurve) SplitBSplineCurve (const Handle(Geom2d_BSplineCurve)& C, const Standard_Integer FromK1, const Standard_Integer ToK2, const Standard_Boolean SameOrientation = Standard_True);
+ Standard_EXPORT static Handle(Geom2d_BSplineCurve) SplitBSplineCurve (const Handle(Geom2d_BSplineCurve)& C,
+ const Standard_Integer FromK1,
+ const Standard_Integer ToK2,
+ const Standard_Boolean SameOrientation = Standard_True);
//! This function computes the segment of B-spline curve between the
//! curve (The tolerance criterion is ParametricTolerance).
//! Raised if Abs (FromU1 - ToU2) <= ParametricTolerance
//! Raised if ParametricTolerance < Resolution from gp.
- Standard_EXPORT static Handle(Geom2d_BSplineCurve) SplitBSplineCurve (const Handle(Geom2d_BSplineCurve)& C, const Standard_Real FromU1, const Standard_Real ToU2, const Standard_Real ParametricTolerance, const Standard_Boolean SameOrientation = Standard_True);
+ Standard_EXPORT static Handle(Geom2d_BSplineCurve) SplitBSplineCurve (const Handle(Geom2d_BSplineCurve)& C,
+ const Standard_Real FromU1,
+ const Standard_Real ToU2,
+ const Standard_Real ParametricTolerance,
+ const Standard_Boolean SameOrientation = Standard_True);
//! This function converts a non infinite curve from
//! Geom into a B-spline curve. C must be an ellipse or a
//! respectively the first and the last parameters of the
//! trimmed curve (this method of parameterization
//! cannot be used to convert a quasi-complete circle or ellipse).
- Standard_EXPORT static Handle(Geom2d_BSplineCurve) CurveToBSplineCurve (const Handle(Geom2d_Curve)& C, const Convert_ParameterisationType Parameterisation = Convert_TgtThetaOver2);
+ Standard_EXPORT static Handle(Geom2d_BSplineCurve) CurveToBSplineCurve (const Handle(Geom2d_Curve)& C,
+ const Convert_ParameterisationType Parameterisation = Convert_TgtThetaOver2);
//! This Method concatenates G1 the ArrayOfCurves as far
//! as it is possible.
//! ArrayOfToler contains the biggest tolerance of the two
//! points shared by two consecutives curves.
//! Its dimension: [0..N-2]
- //! ClosedTolerance indicates if the ArrayOfCurves is closed.
+ //! ClosedFlag indicates if the ArrayOfCurves is closed.
//! In this case ClosedTolerance contains the biggest tolerance
//! of the two points which are at the closure.
//! Otherwise its value is 0.0
- Standard_EXPORT static void ConcatG1 (TColGeom2d_Array1OfBSplineCurve& ArrayOfCurves, const TColStd_Array1OfReal& ArrayOfToler, Handle(TColGeom2d_HArray1OfBSplineCurve)& ArrayOfConcatenated, const Standard_Boolean ClosedFlag, const Standard_Real ClosedTolerance);
+ //! ClosedFlag becomes False on the output
+ //! if it is impossible to build closed curve.
+ Standard_EXPORT static void ConcatG1 (TColGeom2d_Array1OfBSplineCurve& ArrayOfCurves,
+ const TColStd_Array1OfReal& ArrayOfToler,
+ Handle(TColGeom2d_HArray1OfBSplineCurve)& ArrayOfConcatenated,
+ Standard_Boolean& ClosedFlag,
+ const Standard_Real ClosedTolerance);
//! This Method concatenates C1 the ArrayOfCurves as far
//! as it is possible.
//! ArrayOfToler contains the biggest tolerance of the two
//! points shared by two consecutives curves.
//! Its dimension: [0..N-2]
- //! ClosedTolerance indicates if the ArrayOfCurves is closed.
+ //! ClosedFlag indicates if the ArrayOfCurves is closed.
//! In this case ClosedTolerance contains the biggest tolerance
//! of the two points which are at the closure.
//! Otherwise its value is 0.0
- Standard_EXPORT static void ConcatC1 (TColGeom2d_Array1OfBSplineCurve& ArrayOfCurves, const TColStd_Array1OfReal& ArrayOfToler, Handle(TColStd_HArray1OfInteger)& ArrayOfIndices, Handle(TColGeom2d_HArray1OfBSplineCurve)& ArrayOfConcatenated, const Standard_Boolean ClosedFlag, const Standard_Real ClosedTolerance);
+ //! ClosedFlag becomes False on the output
+ //! if it is impossible to build closed curve.
+ Standard_EXPORT static void ConcatC1 (TColGeom2d_Array1OfBSplineCurve& ArrayOfCurves,
+ const TColStd_Array1OfReal& ArrayOfToler,
+ Handle(TColStd_HArray1OfInteger)& ArrayOfIndices,
+ Handle(TColGeom2d_HArray1OfBSplineCurve)& ArrayOfConcatenated,
+ Standard_Boolean& ClosedFlag,
+ const Standard_Real ClosedTolerance);
//! This Method concatenates C1 the ArrayOfCurves as far
//! as it is possible.
//! ArrayOfToler contains the biggest tolerance of the two
//! points shared by two consecutives curves.
//! Its dimension: [0..N-2]
- //! ClosedTolerance indicates if the ArrayOfCurves is closed.
+ //! ClosedFlag indicates if the ArrayOfCurves is closed.
//! In this case ClosedTolerance contains the biggest tolerance
//! of the two points which are at the closure.
//! Otherwise its value is 0.0
- Standard_EXPORT static void ConcatC1 (TColGeom2d_Array1OfBSplineCurve& ArrayOfCurves, const TColStd_Array1OfReal& ArrayOfToler, Handle(TColStd_HArray1OfInteger)& ArrayOfIndices, Handle(TColGeom2d_HArray1OfBSplineCurve)& ArrayOfConcatenated, const Standard_Boolean ClosedFlag, const Standard_Real ClosedTolerance, const Standard_Real AngularTolerance);
+ //! ClosedFlag becomes False on the output
+ //! if it is impossible to build closed curve.
+ Standard_EXPORT static void ConcatC1 (TColGeom2d_Array1OfBSplineCurve& ArrayOfCurves,
+ const TColStd_Array1OfReal& ArrayOfToler,
+ Handle(TColStd_HArray1OfInteger)& ArrayOfIndices,
+ Handle(TColGeom2d_HArray1OfBSplineCurve)& ArrayOfConcatenated,
+ Standard_Boolean& ClosedFlag,
+ const Standard_Real ClosedTolerance,
+ const Standard_Real AngularTolerance);
//! This Method reduces as far as it is possible the
//! multiplicities of the knots of the BSpline BS.(keeping the geometry).
//! It returns a new BSpline which could still be C0.
//! tolerance is a geometrical tolerance
- Standard_EXPORT static void C0BSplineToC1BSplineCurve (Handle(Geom2d_BSplineCurve)& BS, const Standard_Real Tolerance);
+ Standard_EXPORT static void C0BSplineToC1BSplineCurve (Handle(Geom2d_BSplineCurve)& BS,
+ const Standard_Real Tolerance);
//! This Method reduces as far as it is possible the
//! multiplicities of the knots of the BSpline BS.(keeping the geometry).
//! It returns an array of BSpline C1.
//! Tolerance is a geometrical tolerance
- Standard_EXPORT static void C0BSplineToArrayOfC1BSplineCurve (const Handle(Geom2d_BSplineCurve)& BS, Handle(TColGeom2d_HArray1OfBSplineCurve)& tabBS, const Standard_Real Tolerance);
+ Standard_EXPORT static void C0BSplineToArrayOfC1BSplineCurve (const Handle(Geom2d_BSplineCurve)& BS,
+ Handle(TColGeom2d_HArray1OfBSplineCurve)& tabBS,
+ const Standard_Real Tolerance);
//! This Method reduces as far as it is possible the
//! multiplicities of the knots of the BSpline BS.(keeping the geometry).
//! It returns an array of BSpline C1.
//! tolerance is a geometrical tolerance
- Standard_EXPORT static void C0BSplineToArrayOfC1BSplineCurve (const Handle(Geom2d_BSplineCurve)& BS, Handle(TColGeom2d_HArray1OfBSplineCurve)& tabBS, const Standard_Real AngularTolerance, const Standard_Real Tolerance);
+ Standard_EXPORT static void C0BSplineToArrayOfC1BSplineCurve (const Handle(Geom2d_BSplineCurve)& BS,
+ Handle(TColGeom2d_HArray1OfBSplineCurve)& tabBS,
+ const Standard_Real AngularTolerance,
+ const Standard_Real Tolerance);
projects / occt.git / blobdiff