0024002: Overall code and build procedure refactoring -- automatic

[occt.git] / src / GC / GC_MakeCylindricalSurface.cdl

diff --git a/src/GC/GC_MakeCylindricalSurface.cdl b/src/GC/GC_MakeCylindricalSurface.cdl
deleted file mode 100644 (file)
index c904422..0000000
--- a/src/GC/GC_MakeCylindricalSurface.cdl
+++ /dev/null
@@ -1,123 +0,0 @@
--- Created on: 1992-09-28
--- Created by: Remi GILET
--- Copyright (c) 1992-1999 Matra Datavision
--- Copyright (c) 1999-2014 OPEN CASCADE SAS
---
--- This file is part of Open CASCADE Technology software library.
---
--- This library is free software; you can redistribute it and/or modify it under
--- the terms of the GNU Lesser General Public License version 2.1 as published
--- by the Free Software Foundation, with special exception defined in the file
--- OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
--- distribution for complete text of the license and disclaimer of any warranty.
---
--- Alternatively, this file may be used under the terms of Open CASCADE
--- commercial license or contractual agreement.
-
-class MakeCylindricalSurface from GC inherits Root from GC
-
-    ---Purpose : This class implements the following algorithms used 
-    --           to create a CylindricalSurface from Geom.
-    --           * Create a CylindricalSurface parallel to another and 
-    --           passing through a point.
-    --           * Create a CylindricalSurface parallel to another at a 
-    --           distance
-    --             <Dist>.
-    --           * Create a CylindricalSurface passing through 3 points.
-    --           * Create a CylindricalSurface by its axis and radius.
-    --           * Create a cylindricalSurface by its circular base.
-    --  The local coordinate system of the CylindricalSurface is defined
-    --  with an axis placement (see class ElementarySurface).
-    --  
-    --  The "ZAxis" is the symmetry axis of the CylindricalSurface, 
-    --  it gives the direction of increasing parametric value V.
-    --  
-    --  The parametrization range is :
-    --       U [0, 2*PI],  V ]- infinite, + infinite[
-    --       
-    --  The "XAxis" and the "YAxis" define the placement plane of the 
-    --  surface (Z = 0, and parametric value V = 0)  perpendicular to 
-    --  the symmetry axis. The "XAxis" defines the origin of the 
-    --  parameter U = 0.  The trigonometric sense gives the positive 
-    --  orientation for the parameter U.
-
-uses Pnt                from gp,
-     Ax1                from gp,
-     Ax2                from gp,
-     Circ               from gp,
-     Cylinder           from gp,
-     CylindricalSurface from Geom,
-     Real               from Standard
-
-raises NotDone from StdFail
-
-is
-
-Create (A2 : Ax2; Radius : Real) returns MakeCylindricalSurface;
-    --- Purpose :
-    --  A2 defines the local coordinate system of the cylindrical surface.
-    --  The "ZDirection" of A2 defines the direction of the surface's
-    --  axis of symmetry.
-    --  At the creation the parametrization of the surface is defined
-    --  such that the normal Vector (N = D1U ^ D1V) is oriented towards
-    --  the "outside region" of the surface.
-    -- Warnings :
-    --  It is not forbidden to create a cylindrical surface with 
-    --  Radius = 0.0
-    --- Status is "NegativeRadius" if Radius < 0.0
-
-Create (C : Cylinder from gp)  returns MakeCylindricalSurface;
-    --- Purpose :
-    --  Creates a CylindricalSurface from a non persistent Cylinder
-    --  from package gp.
-
-Create(Cyl   : Cylinder from gp;
-       Point : Pnt      from gp) returns MakeCylindricalSurface;
-    ---Purpose : Make a CylindricalSurface from Geom <TheCylinder> 
-    --           parallel to another 
-    --           CylindricalSurface <Cylinder> and passing through a 
-    --           Pnt <Point>.
-
-Create(Cyl  : Cylinder  from gp      ;
-       Dist : Real      from Standard) returns MakeCylindricalSurface;
-    ---Purpose : Make a CylindricalSurface from Geom <TheCylinder> 
-    --           parallel to another 
-    --           CylindricalSurface <Cylinder> at the distance <Dist> 
-    --           which can be greater or lower than zero.
-    --           The radius of the result is the absolute value of the
-    --           radius of <Cyl> plus <Dist>
-
-Create(P1     :     Pnt from gp;
-       P2     :     Pnt from gp;
-       P3     :     Pnt from gp) returns MakeCylindricalSurface;
-    ---Purpose : Make a CylindricalSurface from Geom <TheCylinder> 
-    --           passing through 3 Pnt <P1>,<P2>,<P3>.
-    --           Its axis is <P1P2> and its radius is the distance 
-    --           between <P3> and <P1P2>
-
-Create(Axis   : Ax1  from gp      ;
-       Radius : Real from Standard) returns MakeCylindricalSurface;
-    ---Purpose: Make a CylindricalSurface by its axis <Axis> and radius 
-    --          <Radius>.
-
-Create(Circ   : Circ from gp) returns MakeCylindricalSurface;
-    ---Purpose: Make a CylindricalSurface by its circular base.
-
-Value(me) returns CylindricalSurface from Geom
-    raises NotDone
-    is static;
-    ---Purpose: Returns the constructed cylinder.
-    -- Exceptions StdFail_NotDone if no cylinder is constructed.
-    ---C++: return const&
-    ---C++: alias "operator const Handle(Geom_CylindricalSurface)& () const { return Value(); }"
-
-fields
-
-    TheCylinder : CylindricalSurface from Geom;
-    --The solution from Geom.
-    
-end MakeCylindricalSurface;
-
-
-
-