Wire from TopoDS,
Shell from TopoDS,
Solid from TopoDS,
+ Curve from Geom,
+ Curve from Geom2d,
+ Surface from Geom,
--
BaseAllocator from BOPCol,
ListOfShape from BOPCol,
theRunParallel: Boolean from Standard=Standard_False);
---Purpose:
- --- Provides valid values of tolerances for the shape <theS>
- --- <theTolMax> is max value of the tolerance that can be
- --- accepted for correction. If real value of the tolerance
- --- will be greater than <aTolMax>, the correction does not
- --- perform.
- ---
+ -- Provides valid values of tolerances for the shape <theS>
+ -- <theTolMax> is max value of the tolerance that can be
+ -- accepted for correction. If real value of the tolerance
+ -- will be greater than <aTolMax>, the correction does not
+ -- perform.
+
CorrectCurveOnSurface (myclass;
theS: Shape from TopoDS;
theTolMax: Real from Standard =0.0001;
theRunParallel: Boolean from Standard=Standard_False);
---Purpose:
- --- Provides valid values of tolerances for the shape <theS>
- --- in terms of BRepCheck_InvalidCurveOnSurface.
- ---
+ -- Provides valid values of tolerances for the shape <theS>
+ -- in terms of BRepCheck_InvalidCurveOnSurface.
+
CorrectPointOnCurve (myclass;
theS: Shape from TopoDS;
theTolMax: Real from Standard =0.0001;
theRunParallel: Boolean from Standard=Standard_False);
---Purpose:
- --- Provides valid values of tolerances for the shape <theS>
- --- in terms of BRepCheck_InvalidPointOnCurve.
- ---
- --fields
+ -- Provides valid values of tolerances for the shape <theS>
+ -- in terms of BRepCheck_InvalidPointOnCurve.
- --copy from BOPTools_AlgoTools.cdl
MakeNewVertex (myclass;
aP1 : Pnt from gp;
aTol: Real from Standard;
aNewVertex:out Vertex from TopoDS);
---Purpose:
- --- Make a vertex using 3D-point <aP1> and 3D-tolerance value <aTol>
- ---
+ -- Make a vertex using 3D-point <aP1> and 3D-tolerance value <aTol>
+
MakeNewVertex (myclass;
aV1,aV2: Vertex from TopoDS;
aNewVertex:out Vertex from TopoDS);
---Purpose:
- --- Make a vertex using couple of vertices <aV1, aV2>
- ---
+ -- Make a vertex using couple of vertices <aV1, aV2>
+
MakeNewVertex (myclass;
aE1: Edge from TopoDS;
aP1: Real from Standard;
aP2: Real from Standard;
aNewVertex:out Vertex from TopoDS);
---Purpose:
- --- Make a vertex in place of intersection between two edges
- --- <aE1, aE2> with parameters <aP1, aP2>
- ---
+ -- Make a vertex in place of intersection between two edges
+ -- <aE1, aE2> with parameters <aP1, aP2>
+
MakeNewVertex (myclass;
aE1: Edge from TopoDS;
aP1: Real from Standard;
aF2: Face from TopoDS;
aNewVertex:out Vertex from TopoDS);
---Purpose:
- --- Make a vertex in place of intersection between the edge <aE1>
- --- with parameter <aP1> and the face <aF2>
- ---
+ -- Make a vertex in place of intersection between the edge <aE1>
+ -- with parameter <aP1> and the face <aF2>
+
PointOnEdge (myclass;
aEdge: Edge from TopoDS;
aPrm: Real from Standard;
aP:out Pnt from gp);
---Purpose:
- --- Compute a 3D-point on the edge <aEdge> at parameter <aPrm>
- ---
+ -- Compute a 3D-point on the edge <aEdge> at parameter <aPrm>
+
MakeSplitEdge (myclass;
aE1: Edge from TopoDS;
aV1: Vertex from TopoDS;
aP2: Real from Standard;
aNewEdge:out Edge from TopoDS);
---Purpose:
- --- Make the edge from base edge <aE1> and two vertices <aV1,aV2>
- --- at parameters <aP1,aP2>
- ---
+ -- Make the edge from base edge <aE1> and two vertices <aV1,aV2>
+ -- at parameters <aP1,aP2>
+
MakeSectEdge (myclass;
aIC: Curve from IntTools;
aV1: Vertex from TopoDS;
aP2: Real from Standard;
aNewEdge:out Edge from TopoDS);
---Purpose:
- --- Make the edge from 3D-Curve <aIC> and two vertices <aV1,aV2>
- --- at parameters <aP1,aP2>
- ---
+ -- Make the edge from 3D-Curve <aIC> and two vertices <aV1,aV2>
+ -- at parameters <aP1,aP2>
+
UpdateVertex (myclass;
aIC: Curve from IntTools;
aT : Real from Standard;
aV : Vertex from TopoDS);
---Purpose:
- --- Update the tolerance value for vertex <aV>
- --- taking into account the fact that <aV> lays on
- --- the curve <aIC>
- ---
+ -- Update the tolerance value for vertex <aV>
+ -- taking into account the fact that <aV> lays on
+ -- the curve <aIC>
+
UpdateVertex (myclass;
aE : Edge from TopoDS;
aT : Real from Standard;
aV : Vertex from TopoDS);
---Purpose:
- --- Update the tolerance value for vertex <aV>
- --- taking into account the fact that <aV> lays on
- --- the edge <aE>
- ---
+ -- Update the tolerance value for vertex <aV>
+ -- taking into account the fact that <aV> lays on
+ -- the edge <aE>
+
UpdateVertex (myclass;
aVF : Vertex from TopoDS;
aVN : Vertex from TopoDS);
---Purpose:
- --- Update the tolerance value for vertex <aVN>
- --- taking into account the fact that <aVN> should
- --- cover tolerance zone of <aVF>
- ---
+ -- Update the tolerance value for vertex <aVN>
+ -- taking into account the fact that <aVN> should
+ -- cover tolerance zone of <aVF>
CorrectRange (myclass;
aE1: Edge from TopoDS;
aSR: Range from IntTools;
aNewSR:out Range from IntTools);
---Purpose:
- --- Correct shrunk range <aSR> taking into account 3D-curve
- --- resolution and corresp. tolerances' values of <aE1>, <aE2>
- ---
+ -- Correct shrunk range <aSR> taking into account 3D-curve
+ -- resolution and corresp. tolerances' values of <aE1>, <aE2>
+
CorrectRange (myclass;
aE: Edge from TopoDS;
aF: Face from TopoDS;
aSR: Range from IntTools;
aNewSR:out Range from IntTools);
---Purpose:
- --- Correct shrunk range <aSR> taking into account 3D-curve
- --- resolution and corresp. tolerances' values of <aE>, <aF>
- ---
+ -- Correct shrunk range <aSR> taking into account 3D-curve
+ -- resolution and corresp. tolerances' values of <aE>, <aF>
IsBlockInOnFace(myclass;
aShR : Range from IntTools;
aContext:out Context from IntTools)
returns Boolean from Standard;
---Purpose:
- --- Returns TRUE if PaveBlock <aPB> lays on the face <aF>, i.e
- --- the <PB> is IN or ON in 2D of <aF>
+ -- Returns TRUE if PaveBlock <aPB> lays on the face <aF>, i.e
+ -- the <PB> is IN or ON in 2D of <aF>
IsMicroEdge(myclass;
theEdge : Edge from TopoDS;
theContext : Context from IntTools)
returns Boolean from Standard;
---Purpose:
- --- Checks if it is possible to compute shrunk range for the edge <aE>.
- ---
+ -- Checks if it is possible to compute shrunk range for the edge <aE>.
+ --
CorrectShapeTolerances (myclass;
theS: Shape from TopoDS;
theRunParallel: Boolean from Standard=Standard_False);
---Purpose:
- --- Corrects tolerance values of the sub-shapes of the shape <theS> if needed.
- ---
+ -- Corrects tolerance values of the sub-shapes of the shape <theS> if needed.
Dimension(myclass;
theS:Shape from TopoDS)
returns Integer from Standard;
---Purpose:
- --- Retutns dimension of the shape <theS>.
+ -- Retutns dimension of the shape <theS>.
IsOpenShell(myclass;
theShell:Shell from TopoDS)
IsInvertedSolid(myclass;
theSolid:Solid from TopoDS)
returns Boolean from Standard;
- ---Purpose: Returns true if the solid <theSolid> is inverted
+ ---Purpose: Returns true if the solid <theSolid> is inverted
+ ComputeTolerance(myclass;
+ theCurve3D : Curve from Geom;
+ theCurve2D : Curve from Geom2d;
+ theSurf : Surface from Geom;
+ theMaxDist : out Real from Standard;
+ theMaxPar : out Real from Standard)
+ returns Boolean from Standard;
+ ---Purpose:
+ -- Computes the max distance between points
+ -- taken from 3D and 2D curves by the same parameter
+
+ ComputeTolerance(myclass;
+ theFace : Face from TopoDS;
+ theEdge : Edge from TopoDS;
+ theMaxDist : out Real from Standard;
+ theMaxPar : out Real from Standard)
+ returns Boolean from Standard;
+ ---Purpose:
+ -- Computes the necessary value of the tolerance for the edge
+
end AlgoTools;