-- Created on: 1996-09-03 -- Created by: Olga PILLOT -- Copyright (c) 1996-1999 Matra Datavision -- Copyright (c) 1999-2012 OPEN CASCADE SAS -- -- The content of this file is subject to the Open CASCADE Technology Public -- License Version 6.5 (the "License"). You may not use the content of this file -- except in compliance with the License. Please obtain a copy of the License -- at http://www.opencascade.org and read it completely before using this file. -- -- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its -- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France. -- -- The Original Code and all software distributed under the License is -- distributed on an "AS IS" basis, without warranty of any kind, and the -- Initial Developer hereby disclaims all such warranties, including without -- limitation, any warranties of merchantability, fitness for a particular -- purpose or non-infringement. Please see the License for the specific terms -- and conditions governing the rights and limitations under the License. class MakeDPrism from BRepFeat inherits Form from BRepFeat ---Purpose: Describes functions to build draft -- prism topologies from basis shape surfaces. These can be depressions or protrusions. -- The semantics of draft prism feature creation is based on the -- construction of shapes: -- - along a length -- - up to a limiting face -- - from a limiting face to a height. -- The shape defining construction of the draft prism feature can be -- either the supporting edge or the concerned area of a face. -- In case of the supporting edge, this contour can be attached to a -- face of the basis shape by binding. When the contour is bound to this -- face, the information that the contour will slide on the face -- becomes available to the relevant class methods. -- In case of the concerned area of a face, you could, for example, cut -- it out and move it to a different height which will define the -- limiting face of a protrusion or depression. uses Shape from TopoDS, Face from TopoDS, Wire from TopoDS, Edge from TopoDS, DataMapOfShapeListOfShape from TopTools, DataMapOfShapeShape from TopTools, SequenceOfCurve from TColGeom, Curve from Geom, ListOfShape from TopTools, StatusError from BRepFeat raises ConstructionError from Standard is Create(Sbase : Shape from TopoDS; Pbase : Face from TopoDS; Skface : Face from TopoDS; Angle : Real from Standard; Fuse : Integer from Standard; Modify : Boolean from Standard) ---Purpose: A face Pbase is selected in the shape -- Sbase to serve as the basis for the draft prism. The -- draft will be defined by the angle Angle and Fuse offers a choice between: -- - removing matter with a Boolean cut using the setting 0 -- - adding matter with Boolean fusion using the setting 1. -- The sketch face Skface serves to determine the type of -- operation. If it is inside the basis shape, a local -- operation such as glueing can be performed. ---C++: inline returns MakeDPrism from BRepFeat; Create ---Purpose: Initializes the draft prism class ---C++: inline returns MakeDPrism from BRepFeat; Init(me: in out; Sbase : Shape from TopoDS; Pbase : Face from TopoDS; Skface : Face from TopoDS; Angle : Real from Standard; Fuse : Integer from Standard; Modify : Boolean from Standard) is static; ---Purpose: Initializes this algorithm for building draft prisms along surfaces. -- A face Pbase is selected in the basis shape Sbase to -- serve as the basis from the draft prism. The draft will be -- defined by the angle Angle and Fuse offers a choice between: -- - removing matter with a Boolean cut using the setting 0 -- - adding matter with Boolean fusion using the setting 1. -- The sketch face Skface serves to determine the type of -- operation. If it is inside the basis shape, a local -- operation such as glueing can be performed. Add(me: in out; E: Edge from TopoDS; OnFace: Face from TopoDS) ---Purpose: Indicates that the edge will slide on the face -- . -- Raises ConstructionError if the face does not belong to the -- basis shape, or the edge to the prismed shape. raises ConstructionError from Standard is static; Perform(me: in out; Height: Real from Standard) is static; Perform(me: in out; Until: Shape from TopoDS) is static; Perform(me: in out; From : Shape from TopoDS; Until: Shape from TopoDS) is static; ---Purpose: Assigns one of the following semantics -- - to a height Height -- - to a face Until -- - from a face From to a height Until. -- Reconstructs the feature topologically according to the semantic option chosen. PerformUntilEnd(me: in out) ---Purpose: Realizes a semi-infinite prism, limited by the position of the prism base. is static; PerformFromEnd(me: in out; FUntil: Shape from TopoDS) ---Purpose: Realizes a semi-infinite prism, limited by the face Funtil. is static; PerformThruAll(me: in out) ---Purpose: Builds an infinite prism. The infinite descendants will not be kept in the result. is static; PerformUntilHeight(me: in out; Until : Shape from TopoDS; Height: Real from Standard) ---Purpose: Assigns both a limiting shape, Until from -- TopoDS_Shape, and a height, Height at which to stop -- generation of the prism feature. is static; Curves(me: in out; S : in out SequenceOfCurve from TColGeom); BarycCurve(me: in out) returns Curve from Geom; BossEdges(me: in out; sig: Integer from Standard) ---Purpose: Determination of TopEdges and LatEdges. -- sig = 1 -> TopEdges = FirstShape of the DPrism -- sig = 2 -> TOpEdges = LastShape of the DPrism is static; TopEdges(me: in out) ---Purpose: Returns the list of TopoDS Edges of the top of the boss. returns ListOfShape from TopTools ---C++: return const& is static; LatEdges(me: in out) ---Purpose: Returns the list of TopoDS Edges of the bottom of the boss. returns ListOfShape from TopTools ---C++: return const& is static; fields myPbase : Face from TopoDS; mySlface : DataMapOfShapeListOfShape from TopTools; myAngle : Real from Standard; myCurves : SequenceOfCurve from TColGeom; myBCurve : Curve from Geom; myTopEdges : ListOfShape from TopTools; myLatEdges : ListOfShape from TopTools; myStatusError : StatusError from BRepFeat; end MakeDPrism;