// Created by: Peter KURNEV
// Copyright (c) 2010-2014 OPEN CASCADE SAS
// Copyright (c) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE
// Copyright (c) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, CEDRAT,
//                         EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
//
// This file is part of Open CASCADE Technology software library.
//
// This library is free software; you can redistribute it and/or modify it under
// the terms of the GNU Lesser General Public License version 2.1 as published
// by the Free Software Foundation, with special exception defined in the file
// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
// distribution for complete text of the license and disclaimer of any warranty.
//
// Alternatively, this file may be used under the terms of Open CASCADE
// commercial license or contractual agreement.

#ifndef _BOPAlgo_BuilderSolid_HeaderFile
#define _BOPAlgo_BuilderSolid_HeaderFile

#include <Standard.hxx>
#include <Standard_DefineAlloc.hxx>
#include <Standard_Handle.hxx>

#include <BOPAlgo_BuilderArea.hxx>
#include <NCollection_BaseAllocator.hxx>
#include <TopTools_DataMapOfShapeBox.hxx>


//! Solid Builder is the algorithm for building solids from set of faces.
//! The given faces should be non-intersecting, i.e. all coinciding parts
//! of the faces should be shared among them.
//!
//! The algorithm performs the following steps to build the solids:
//! 1. Find:
//!    - faces orientated INTERNAL;
//!    - alone faces given twice with different orientation;
//! 2. Build all possible closed shells from the rest of the faces
//!    (*BOPAlgo_ShellSplitter* is used for that);
//! 3. Classify the obtained shells on the Holes and Growths;
//! 4. Build solids from the Growth shells, put Hole shells into closest Growth solids;
//! 5. Classify all unused faces relatively created solids and put them as internal
//!    shells into the closest solids;
//! 6. Find all unclassified faces, i.e. faces outside of all created solids,
//!    make internal shells from them and put these shells into a warning.
//!
//! It is possible to avoid all internal shells in the resulting solids.
//! For that it is necessary to use the method SetAvoidInternalShapes(true)
//! of the base class. In this case the steps 5 and 6 will not be performed at all.
//!
//! The algorithm may return the following warnings:
//! - *BOPAlgo_AlertShellSplitterFailed* in case the ShellSplitter algorithm has failed;
//! - *BOPAlgo_AlertSolidBuilderUnusedFaces* in case there are some faces outside of
//!   created solids left.
//!
//! Example of usage of the algorithm:
//! ~~~~
//! const TopTools_ListOfShape& aFaces = ...;     // Faces to build the solids
//! Standard_Boolean isAvoidInternals = ...;      // Flag which defines whether to create the internal shells or not
//! BOPAlgo_BuilderSolid aBS;                     // Solid Builder tool
//! aBS.SetShapes(aFaces);                        // Set the faces
//! aBS.SetAvoidInternalShapes(isAvoidInternals); // Set the AvoidInternalShapesFlag
//! aBS.Perform();                                // Perform the operation
//! if (!aBS.IsDone())                            // Check for the errors
//! {
//!   // error treatment
//!   Standard_SStream aSStream;
//!   aBS.DumpErrors(aSStream);
//!   return;
//! }
//! if (aBS.HasWarnings())                        // Check for the warnings
//! {
//!   // warnings treatment
//!   Standard_SStream aSStream;
//!   aBS.DumpWarnings(aSStream);
//! }
//!
//! const TopTools_ListOfShape& aSolids = aBS.Areas(); // Obtaining the result solids
//! ~~~~
//!
class BOPAlgo_BuilderSolid  : public BOPAlgo_BuilderArea
{
public:

  DEFINE_STANDARD_ALLOC

public: //! @name Constructors

  //! Empty constructor
  Standard_EXPORT BOPAlgo_BuilderSolid();
  Standard_EXPORT virtual ~BOPAlgo_BuilderSolid();

  //! Constructor with allocator
  Standard_EXPORT BOPAlgo_BuilderSolid(const Handle(NCollection_BaseAllocator)& theAllocator);

public: //! @name Performing the operation

  //! Performs the construction of the solids from the given faces
  Standard_EXPORT virtual void Perform() Standard_OVERRIDE;

public: //! @name Getting the bounding boxes of the created solids

  //! For classification purposes the algorithm builds the bounding boxes
  //! for all created solids. This method returns the data map of solid - box pairs.
  const TopTools_DataMapOfShapeBox& GetBoxesMap() const
  {
    return myBoxes;
  }

protected: //! @name Protected methods performing the operation

  //! Collect the faces:
  //! - with INTERNAL orientation;
  //! - that are alone but given twice with different orientation.
  //! These faces will be put into the map *myShapesToAvoid* and will be
  //! avoided in shells construction, but will be classified later on.
  Standard_EXPORT virtual void PerformShapesToAvoid() Standard_OVERRIDE;

  //! Build all possible closed shells from the given faces.
  //! The method fills the following maps:
  //! - myLoops - Created closed shells;
  //! - myLoopsInternal - The shells created from unused faces.
  Standard_EXPORT virtual void PerformLoops() Standard_OVERRIDE;

  //! Classifies the created shells on the Holes and Growths.
  //! Creates the solids from the Growths shells.
  //! Puts the Hole shells into the closest Growths solids.
  Standard_EXPORT virtual void PerformAreas() Standard_OVERRIDE;

  //! Classifies the unused faces relatively the created solids.
  //! Puts the classified faces into the closest solids as internal shells.
  //! Warns the user about unclassified faces if any.
  Standard_EXPORT virtual void PerformInternalShapes() Standard_OVERRIDE;

private:

  TopTools_DataMapOfShapeBox myBoxes; // Boxes of the produced solids

};

#endif // _BOPAlgo_BuilderSolid_HeaderFile