# Copyright (c) 1999-2014 OPEN CASCADE SAS
#
#Category: Demos
#Title: Displaying 3d viewer
#
# This file is part of Open CASCADE Technology software library.
#
# This library is free software; you can redistribute it and / or modify it
# under the terms of the GNU Lesser General Public version 2.1 as published
# by the Free Software Foundation, with special exception defined in the file
# OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
# distribution for complete text of the license and disclaimer of any warranty.
#
# Alternatively, this file may be used under the terms of Open CASCADE
# commercial license or contractual agreement.

# Command to log a message to both command-line and dialog window
proc sage { a} {
    if { ![winfo exists .h ] } {
        toplevel .h -bg azure3
        wm title .h "INFO TEST HARNESS"
        wm geometry .h +320+20
    } 
    if { [winfo exists .h.m ] } {
        set astring [.h.m cget  -text]
        set newstring "${astring} \n $a"
        .h.m configure -text $newstring 
        puts $a
    } else {
        message .h.m -justify left -bg azure2 -width 13c -relief ridge -bd 4 -text $a
        puts $a
    } 
    pack .h.m
    update
}

if { [winfo exists .h ] } {
    destroy .h
}

pload MODELING VISUALIZATION

sage " Creating the V3D Viewer"
sage "    vinit"
sage " " 
vinit
vclear
clear

sage " Creating the Topological Viewer"
sage "    smallview"
sage " " 
smallview
sage " Creating a box"
sage "    box  b -10 -10 -10 20 20 20"
sage " "
box b -10 -10 -10 20 20 20
fit
sage " Display the box in the V3D Viewer"
sage "    vdisplay b"
sage " "
vdisplay b
vfit
nexplode b f
erase b
sage " Draft of two lateral faces "
sage "    nexplode b f"
sage "    depouille r b  0 0  -1 b_6 -15 10 -10 10  0 0 -1 "
sage "    nexplode r f"
sage "    depouille rr r  0 0 -1   r_1 -15 -10 -10 10  0 0 -1 "
sage " "
depouille r b  0 0  -1 b_6 -15 10 -10 10  0 0 -1 
clear
nexplode r f
depouille rr r  0 0 -1   r_1 -15 -10 -10 10  0 0 -1 
clear
nexplode rr e
verase b
vdisplay rr
vfit
sage " Fillet on four lateral edges, then on the top and bottom edges  "
sage "    nexplode rr e"
sage "    blend result rr 3 rr_2 3 rr_3 3 rr_10 3 rr_11"
sage "    nexplode result e"
sage "    blend result result 2 result_11 3 result_12"
sage " "
blend result rr 3 rr_2 3 rr_3 3 rr_10 3 rr_11
erase rr
erase result
nexplode result e
blend result result 2 result_11 3 result_12 
clear
nexplode result f
verase rr
vdisplay result
vfit
sage " Creating a profile on the top face "
sage "    nexplode result f"
sage "    profile p  S result_16 F 10 4 D 1 0 C 2 90. Y 8 C 2 90. X -2 C 2 90. Y -8 C 2 90. X 2
"
sage " "
profile p  S result_16 F 10 4 D 1 0 C 2 90. Y 8 C 2 90. X -2 C 2 90. Y -8 C 2 90. X 2
sage " Creating a prism"
sage "    prism rr p 0 0 20"
sage " "
prism rr p 0 0 20
sage " Change some attributs : MATERIAL , TRANSPARENCY"
sage "    vsetmaterial rr PLASTIC"
sage "    vsetcolor rr RED"
sage "    vsettransparency result 0.5"
sage "    vsetdispmode 1"
sage " "
vdisplay rr
vsetmaterial rr PLASTIC
vsettransparency rr 0.5
vsetcolor rr RED
vsettransparency result 0.5
vsetdispmode 1
vfit
fit
sage " Fusion of this prism with the original part "
sage "    fuse result rr result"
sage " "
fuse result rr result
donl result
vdisplay result
vdonly result
vfit
nexplode result f
erase result
fit

sage " Opening the top face"
sage "    offsetshape r result -1 0.0001 result_17"
sage " "
nexplode result f

offsetshape r result -1 0.0001 result_17
vdisplay r
vdonly r
vfit
vsetcolor r MATRABLUE
vsettransparency r 0

sage " Creating a cylinder and positionning it"
sage "    pcylinder cyl 2 300"
sage "    trotate cyl cyl 0 0 0  1 0 0 45"
sage "    ttranslate cyl cyl 0 7.5 0"
sage " "
pcylinder cyl 2 30
vdisplay cyl 
vsetcolor cyl RED
vfit
trotate cyl cyl 0 0 0  1 0 0 45
ttranslate cyl cyl 0 7.5 0
vdisplay cyl 
vsetcolor cyl RED
vfit
vdisplay cyl 
vsetcolor cyl RED
vfit
sage "Demo completed"