1 // ModelingDoc.cpp : implementation of the CModelingDoc class
6 #include "ModelingDoc.h"
8 #include "ModelingApp.h"
9 #include "ResultDialog.h"
12 #include "ISession_Direction.h"
13 #include "..\res\resource.h"
15 #include <Adaptor3d_CurveOnSurface.hxx>
16 #include <AIS_ColoredShape.hxx>
17 #include <AIS_ListOfInteractive.hxx>
18 #include <AIS_ListIteratorOfListOfInteractive.hxx>
19 #include <TColStd_Array2OfReal.hxx>
20 #include <OCC_MainFrame.h>
21 #include <BRepPrimAPI_MakeCylinder.hxx>
22 #include <TopExp_Explorer.hxx>
23 #include <Geom_Plane.hxx>
24 #include <BRepTools.hxx>
26 static Handle(AIS_Shape) AIS1;
27 static TopoDS_Face THE_F1, THE_F2;
28 static TopoDS_Edge THE_E1, THE_E2;
30 /////////////////////////////////////////////////////////////////////////////
33 IMPLEMENT_DYNCREATE(CModelingDoc, CDocument)
35 BEGIN_MESSAGE_MAP(CModelingDoc, OCC_3dBaseDoc)
36 //{{AFX_MSG_MAP(CModelingDoc)
37 ON_COMMAND(ID_MIRROR, OnMirror)
38 ON_COMMAND(ID_MIRRORAXIS, OnMirroraxis)
39 ON_COMMAND(ID_ROTATE, OnRotate)
40 ON_COMMAND(ID_SCALE, OnScale)
41 ON_COMMAND(ID_TRANSLATION, OnTranslation)
42 ON_COMMAND(ID_DISPLACEMENT, OnDisplacement)
43 ON_COMMAND(ID_DEFORM, OnDeform)
44 ON_COMMAND(ID_BOX, OnBox)
45 ON_COMMAND(ID_Cylinder, OnCylinder)
46 ON_COMMAND(ID_CONE, OnCone)
47 ON_COMMAND(ID_SPHERE, OnSphere)
48 ON_COMMAND(ID_TORUS, OnTorus)
49 ON_COMMAND(ID_WEDGE, OnWedge)
50 ON_COMMAND(ID_PRISM, OnPrism)
51 ON_COMMAND(ID_REVOL, OnRevol)
52 ON_COMMAND(ID_PIPE, OnPipe)
53 ON_COMMAND(ID_THRU, OnThru)
54 ON_COMMAND(ID_EVOLVED, OnEvolved)
55 ON_COMMAND(ID_DRAFT, OnDraft)
56 ON_COMMAND(ID_CUT, OnCut)
57 ON_COMMAND(ID_FUSE, OnFuse)
58 ON_COMMAND(ID_SECTION, OnSection)
59 ON_COMMAND(ID_COMMON, OnCommon)
60 ON_COMMAND(ID_PSECTION, OnPsection)
61 ON_COMMAND(ID_BLEND, OnBlend)
62 ON_COMMAND(ID_CHAMF, OnChamf)
63 ON_COMMAND(ID_EVOLVEDBLEND, OnEvolvedblend)
64 ON_COMMAND(ID_PRISM_LOCAL, OnPrismLocal)
65 ON_COMMAND(ID_REVOL_LOCAL, OnRevolLocal)
66 ON_COMMAND(ID_GLUE_LOCAL, OnGlueLocal)
67 ON_COMMAND(ID_DPRISM_LOCAL, OnDprismLocal)
68 ON_COMMAND(ID_Pipe_LOCAL, OnPipeLocal)
69 ON_COMMAND(ID_LINEAR_LOCAL, OnLinearLocal)
70 ON_COMMAND(ID_SPLIT_LOCAL, OnSplitLocal)
71 ON_COMMAND(ID_THICK_LOCAL, OnThickLocal)
72 ON_COMMAND(ID_OFFSET_LOCAL, OnOffsetLocal)
73 ON_COMMAND(ID_VERTEX, OnVertex)
74 ON_COMMAND(ID_EDGE, OnEdge)
75 ON_COMMAND(ID_WIRE, OnWire)
76 ON_COMMAND(ID_FACE, OnFace)
77 ON_COMMAND(ID_SHELL, OnShell)
78 ON_COMMAND(ID_COMPOUND, OnCompound)
79 ON_COMMAND(ID_GEOMETRIE, OnGeometrie)
80 ON_COMMAND(ID_SEWING, OnSewing)
81 ON_COMMAND(ID_EXPLORER, OnExplorer)
82 ON_COMMAND(ID_BUILDER, OnBuilder)
83 ON_COMMAND(ID_VALID, OnValid)
84 ON_COMMAND(ID_LINEAR, OnLinear)
85 ON_COMMAND(ID_VOLUME, OnVolume)
86 ON_COMMAND(ID_SURFACE, OnSurface)
87 ON_COMMAND(ID_BUTTON_FILL, OnButtonFill)
88 ON_COMMAND(ID_STOP_STOP, OnStopStop)
89 ON_COMMAND(ID_FILLWITHTANG, OnFillwithtang)
93 /////////////////////////////////////////////////////////////////////////////
94 // CModelingDoc construction/destruction
96 CModelingDoc::CModelingDoc()
98 myAISContext->SetDisplayMode(AIS_Shaded,Standard_False);
101 CModelingDoc::~CModelingDoc()
105 void CModelingDoc::OnMirror()
107 AIS_ListOfInteractive aList;
108 myAISContext->DisplayedObjects(aList);
109 AIS_ListIteratorOfListOfInteractive aListIterator;
110 for(aListIterator.Initialize(aList);aListIterator.More();aListIterator.Next()){
111 myAISContext->Remove (aListIterator.Value(), Standard_False);
113 TopoDS_Shape S = BRepPrimAPI_MakeWedge (60.,100.,80.,20.).Shape();
114 Handle(AIS_Shape) ais1 = new AIS_Shape(S);
115 myAISContext->SetColor(ais1,Quantity_NOC_GREEN,Standard_False);
116 myAISContext->SetMaterial(ais1,Graphic3d_NOM_PLASTIC,Standard_False);
117 myAISContext->Display(ais1,Standard_False);
118 gp_Trsf theTransformation;
119 gp_Pnt PntCenterOfTheTransformation(110,60,60);
120 Handle(AIS_Point) aispnt = new AIS_Point(new Geom_CartesianPoint(PntCenterOfTheTransformation));
121 myAISContext->Display(aispnt,Standard_False);
122 theTransformation.SetMirror(PntCenterOfTheTransformation);
123 BRepBuilderAPI_Transform myBRepTransformation(S,theTransformation);
124 TopoDS_Shape S2 = myBRepTransformation.Shape();
125 Handle(AIS_Shape) ais2 = new AIS_Shape(S2);
126 myAISContext->SetColor(ais2,Quantity_NOC_BLUE1,Standard_False);
127 myAISContext->SetMaterial(ais2,Graphic3d_NOM_PLASTIC,Standard_False);
128 myAISContext->Display(ais2,Standard_False);
130 TCollection_AsciiString Message ("\
132 TopoDS_Shape S = BRepBuilderAPI_MakeWedge(60.,100.,80.,20.); \n\
133 gp_Trsf theTransformation; \n\
134 gp_Pnt PntCenterOfTheTransformation(110,60,60); \n\
135 theTransformation.SetMirror(PntCenterOfTheTransformation);\n\
136 BRepBuilderAPI_Transform myBRepTransformation(S,theTransformation);\n\
137 TopoDS_Shape TransformedShape = myBRepTransformation.Shape(); \n");
138 PocessTextInDialog("Transform a Shape with Mirror and One point.", Message);
142 void CModelingDoc::OnMirroraxis()
144 AIS_ListOfInteractive aList;
145 myAISContext->DisplayedObjects(aList);
146 AIS_ListIteratorOfListOfInteractive aListIterator;
147 for(aListIterator.Initialize(aList);aListIterator.More();aListIterator.Next()){
148 myAISContext->Remove (aListIterator.Value(), Standard_False);
150 TopoDS_Shape S = BRepPrimAPI_MakeWedge(60.,100.,80.,20.).Shape();
151 Handle(AIS_Shape) ais1 = new AIS_Shape(S);
152 myAISContext->SetColor(ais1,Quantity_NOC_GREEN,Standard_False);
153 myAISContext->SetMaterial(ais1,Graphic3d_NOM_PLASTIC,Standard_False);
154 myAISContext->Display(ais1,Standard_False);
155 gp_Trsf theTransformation;
156 gp_Ax1 axe = gp_Ax1(gp_Pnt(110,60,60),gp_Dir(0.,1.,0.));
157 Handle(Geom_Axis1Placement) Gax1 = new Geom_Axis1Placement(axe);
158 Handle (AIS_Axis) ax1 = new AIS_Axis(Gax1);
159 myAISContext->Display(ax1,Standard_False);
160 theTransformation.SetMirror(axe);
161 BRepBuilderAPI_Transform myBRepTransformation(S,theTransformation);
162 TopoDS_Shape S2 = myBRepTransformation.Shape();
163 Handle(AIS_Shape) ais2 = new AIS_Shape(S2);
164 myAISContext->SetColor(ais2,Quantity_NOC_BLUE1,Standard_False);
165 myAISContext->SetMaterial(ais2,Graphic3d_NOM_PLASTIC,Standard_False);
166 myAISContext->Display(ais2,Standard_False);
169 TCollection_AsciiString Message ("\
171 TopoDS_Shape S = BRepBuilderAPI_MakeWedge(60.,100.,80.,20.); \n\
172 gp_Trsf theTransformation; \n\
173 gp_Ax1 Axis = gp_Ax1(gp_Pnt(110,60,60),gp_Dir(0.,1.,0.)); \n\
174 theTransformation.SetMirror(Axis);\n\
175 BRepBuilderAPI_Transform myBRepTransformation(S,theTransformation);\n\
176 TopoDS_Shape TransformedShape = myBRepTransformation.Shape(); \n");
178 PocessTextInDialog("Transform a Shape with Mirror and One axis.", Message);
183 void CModelingDoc::OnRotate()
185 AIS_ListOfInteractive aList;
186 myAISContext->DisplayedObjects(aList);
187 AIS_ListIteratorOfListOfInteractive aListIterator;
188 for(aListIterator.Initialize(aList);aListIterator.More();aListIterator.Next()){
189 myAISContext->Remove (aListIterator.Value(), Standard_False);
191 TopoDS_Shape S = BRepPrimAPI_MakeWedge(60.,100.,80.,20.).Shape();
192 Handle(AIS_Shape) ais1 = new AIS_Shape(S);
193 myAISContext->SetColor(ais1,Quantity_NOC_GREEN,Standard_False);
194 myAISContext->SetMaterial(ais1,Graphic3d_NOM_PLASTIC,Standard_False);
195 myAISContext->Display(ais1,Standard_False);
196 gp_Trsf theTransformation;
197 gp_Ax1 axe = gp_Ax1(gp_Pnt(200,60,60),gp_Dir(0.,1.,0.));
198 Handle(Geom_Axis1Placement) Gax1 = new Geom_Axis1Placement(axe);
199 Handle (AIS_Axis) ax1 = new AIS_Axis(Gax1);
200 myAISContext->Display(ax1,Standard_False);
201 theTransformation.SetRotation(axe,30*M_PI/180);
202 BRepBuilderAPI_Transform myBRepTransformation(S,theTransformation);
203 TopoDS_Shape S2 = myBRepTransformation.Shape();
204 Handle(AIS_Shape) ais2 = new AIS_Shape(S2);
205 myAISContext->SetColor(ais2,Quantity_NOC_BLUE1,Standard_False);
206 myAISContext->SetMaterial(ais2,Graphic3d_NOM_PLASTIC,Standard_False);
207 myAISContext->Display(ais2,Standard_False);
210 TCollection_AsciiString Message ("\
212 TopoDS_Shape S = BRepBuilderAPI_MakeWedge(60.,100.,80.,20.); \n\
213 gp_Trsf theTransformation; \n\
214 gp_Ax1 Axis = gp_Ax1(gp_Pnt(200,60,60),gp_Dir(0.,1.,0.)); \n\
215 theTransformation.SetRotation(Axis,30*PI/180); // Rotation of 30 degrees \n\
216 BRepBuilderAPI_Transform myBRepTransformation(S,theTransformation);\n\
217 TopoDS_Shape TransformedShape = myBRepTransformation.Shape(); \n");
219 PocessTextInDialog("Transform a Shape with Rotation.", Message);
223 void CModelingDoc::OnScale()
225 AIS_ListOfInteractive aList;
226 myAISContext->DisplayedObjects(aList);
227 AIS_ListIteratorOfListOfInteractive aListIterator;
228 for(aListIterator.Initialize(aList);aListIterator.More();aListIterator.Next()){
229 myAISContext->Remove (aListIterator.Value(), Standard_False);
231 TopoDS_Shape S = BRepPrimAPI_MakeWedge(60.,100.,80.,20.).Shape();
232 Handle(AIS_Shape) ais1 = new AIS_Shape(S);
233 myAISContext->SetColor(ais1,Quantity_NOC_GREEN,Standard_False);
234 myAISContext->SetMaterial(ais1,Graphic3d_NOM_PLASTIC,Standard_False);
235 myAISContext->Display(ais1,Standard_False);
236 gp_Trsf theTransformation;
237 gp_Pnt theCenterOfScale(200,60,60);
238 Handle(AIS_Point) aispnt = new AIS_Point(new Geom_CartesianPoint(theCenterOfScale));
240 myAISContext->Display(aispnt,Standard_False);
241 theTransformation.SetScale(theCenterOfScale,0.5);
242 BRepBuilderAPI_Transform myBRepTransformation(S,theTransformation);
243 TopoDS_Shape S2 = myBRepTransformation.Shape();
245 Handle(AIS_Shape) ais2 = new AIS_Shape(S2);
246 myAISContext->SetColor(ais2,Quantity_NOC_BLUE1,Standard_False);
247 myAISContext->SetMaterial(ais2,Graphic3d_NOM_PLASTIC,Standard_False);
248 myAISContext->Display(ais2,Standard_False);
251 TCollection_AsciiString Message ("\
253 TopoDS_Shape S = BRepBuilderAPI_MakeWedge(60.,100.,80.,20.); \n\
254 gp_Trsf theTransformation; \n\
255 gp_Pnt theCenterOfScale(200,60,60); \n\
256 theTransformation.SetScale(theCenterOfScale,0.5); // Scale : value = 0.5 \n\
257 BRepBuilderAPI_Transform myBRepTransformation(S,theTransformation);\n\
258 TopoDS_Shape TransformedShape = myBRepTransformation.Shape(); \n");
260 PocessTextInDialog("Scale a Shape with One point.", Message);
267 void CModelingDoc::OnTranslation()
269 AIS_ListOfInteractive aList;
270 myAISContext->DisplayedObjects(aList);
271 AIS_ListIteratorOfListOfInteractive aListIterator;
272 for(aListIterator.Initialize(aList);aListIterator.More();aListIterator.Next()){
273 myAISContext->Remove (aListIterator.Value(), Standard_False);
275 TopoDS_Shape S = BRepPrimAPI_MakeWedge(6.,10.,8.,2.).Shape();
276 Handle(AIS_Shape) ais1 = new AIS_Shape(S);
277 myAISContext->SetColor(ais1,Quantity_NOC_GREEN,Standard_False);
278 myAISContext->SetMaterial(ais1,Graphic3d_NOM_PLASTIC,Standard_False);
279 myAISContext->Display(ais1,Standard_False);
280 gp_Trsf theTransformation;
281 gp_Vec theVectorOfTranslation(-6,-6,6);
283 Handle(ISession_Direction) aDirection1 = new ISession_Direction(gp_Pnt(0,0,0),theVectorOfTranslation);
284 myAISContext->Display(aDirection1,Standard_False);
286 theTransformation.SetTranslation(theVectorOfTranslation);
287 BRepBuilderAPI_Transform myBRepTransformation(S,theTransformation);
288 TopoDS_Shape S2 = myBRepTransformation.Shape();
290 Handle(AIS_Shape) ais2 = new AIS_Shape(S2);
291 myAISContext->SetColor(ais2,Quantity_NOC_BLUE1,Standard_False);
292 myAISContext->SetMaterial(ais2,Graphic3d_NOM_PLASTIC,Standard_False);
293 myAISContext->Display(ais2,Standard_False);
297 TCollection_AsciiString Message ("\
299 TopoDS_Shape S = BRepBuilderAPI_MakeWedge(6.,10.,8.,2.); \n\
300 gp_Trsf theTransformation; \n\
301 gp_Vec theVectorOfTranslation(6,6,6); \n\
302 theTransformation.SetTranslation(theVectorOfTranslation); \n\
303 BRepBuilderAPI_Transform myBRepTransformation(S,theTransformation);\n\
304 TopoDS_Shape TransformedShape = myBRepTransformation.Shape(); \n");
306 PocessTextInDialog("Translate a Shape with One vector.", Message);
310 void CModelingDoc::OnDisplacement()
312 AIS_ListOfInteractive aList;
313 myAISContext->DisplayedObjects(aList);
314 AIS_ListIteratorOfListOfInteractive aListIterator;
315 for(aListIterator.Initialize(aList);aListIterator.More();aListIterator.Next()){
316 myAISContext->Remove (aListIterator.Value(), Standard_False);
318 TopoDS_Shape S = BRepPrimAPI_MakeWedge(60., 100., 80., 20.).Shape();
319 Handle(AIS_Shape) ais1 = new AIS_Shape(S);
320 myAISContext->SetColor(ais1,Quantity_NOC_GREEN,Standard_False);
321 myAISContext->SetMaterial(ais1,Graphic3d_NOM_PLASTIC,Standard_False);
322 myAISContext->Display(ais1,Standard_False);
323 gp_Trsf theTransformation;
325 gp_Ax3 ax3_1(gp_Pnt(0,0,0),gp_Dir(0,0,1));
326 gp_Ax3 ax3_2(gp_Pnt(60,60,60),gp_Dir(1,1,1));
328 theTransformation.SetDisplacement(ax3_1,ax3_2);
329 BRepBuilderAPI_Transform myBRepTransformation(S,theTransformation);
330 TopoDS_Shape TransformedShape = myBRepTransformation.Shape();
331 Handle(AIS_Shape) ais2 = new AIS_Shape(TransformedShape);
332 myAISContext->SetColor(ais2,Quantity_NOC_BLUE1,Standard_False);
333 myAISContext->SetMaterial(ais2,Graphic3d_NOM_PLASTIC,Standard_False);
334 myAISContext->Display(ais2,Standard_False);
336 TCollection_AsciiString Message ("\
338 TopoDS_Shape S = BRepBuilderAPI_MakeWedge(60.,100.,80.,20.); \n\
339 gp_Trsf theTransformation; \n\
340 gp_Ax3 ax3_1(gp_Pnt(0,0,0),gp_Dir(0,0,1)); \n\
341 gp_Ax3 ax3_2(gp_Pnt(60,60,60),gp_Dir(1,1,1)); \n\
342 theTransformation.SetDisplacement(ax3_1,ax3_2); \n\
343 BRepBuilderAPI_Transform myBRepTransformation(S,theTransformation);\n\
344 TopoDS_Shape TransformedShape = myBRepTransformation.Shape(); \n");
346 PocessTextInDialog("Displace a Shape with Two coordinate systems.", Message);
352 void CModelingDoc::OnDeform()
354 AIS_ListOfInteractive aList;
355 myAISContext->DisplayedObjects(aList);
356 AIS_ListIteratorOfListOfInteractive aListIterator;
357 for(aListIterator.Initialize(aList);aListIterator.More();aListIterator.Next()){
358 myAISContext->Remove (aListIterator.Value(), Standard_False);
360 TopoDS_Shape S = BRepPrimAPI_MakeWedge(60., 100., 80., 20.).Shape();
361 Handle(AIS_Shape) ais1 = new AIS_Shape(S);
362 myAISContext->SetColor(ais1,Quantity_NOC_GREEN,Standard_False);
363 myAISContext->SetMaterial(ais1,Graphic3d_NOM_PLASTIC,Standard_False);
364 myAISContext->Display(ais1,Standard_False);
366 gp_GTrsf theTransformation;
367 gp_Mat rot(1, 0, 0, 0, 0.5, 0, 0, 0, 1.5);
368 theTransformation.SetVectorialPart(rot);
369 theTransformation.SetTranslationPart(gp_XYZ(5,5,5));
371 BRepBuilderAPI_GTransform myBRepTransformation(S,theTransformation);
372 TopoDS_Shape S2 = myBRepTransformation.Shape();
374 Handle(AIS_Shape) ais2 = new AIS_Shape(S2);
375 myAISContext->SetColor(ais2,Quantity_NOC_BLUE1,Standard_False);
376 myAISContext->SetMaterial(ais2,Graphic3d_NOM_PLASTIC,Standard_False);
377 myAISContext->Display(ais2,Standard_False);
379 TCollection_AsciiString Message ("\
381 TopoDS_Shape S = BRepBuilderAPI_MakeWedge(60.,100.,80.,20.); \n\
382 gp_GTrsf theTransformation; \n\
383 gp_Mat rot(1, 0, 0, 0, 0.5, 0, 0, 0, 1.5); // scaling : 100% on X ; 50% on Y ; 150% on Z . \n\
384 theTransformation.SetVectorialPart(rot); \n\
385 theTransformation.SetTranslationPart(gp_XYZ(5,5,5)); \n\
386 BRepBuilderAPI_GTransform myBRepGTransformation(S,theTransformation);\n\
387 TopoDS_Shape TransformedShape = myBRepGTransformation.Shape(); \n");
389 PocessTextInDialog("Deform a Shape with One matrix of deformation and One translation.", Message);
392 /* =================================================================================
393 ==================== P R I M I T I V E S ====================================
394 ================================================================================= */
396 void CModelingDoc::OnBox()
398 AIS_ListOfInteractive aList;
399 myAISContext->DisplayedObjects(aList);
400 AIS_ListIteratorOfListOfInteractive aListIterator;
401 for(aListIterator.Initialize(aList);aListIterator.More();aListIterator.Next()){
402 myAISContext->Remove (aListIterator.Value(), Standard_False);
404 TopoDS_Shape B1 = BRepPrimAPI_MakeBox(200., 150., 100.).Shape();
405 Handle(AIS_Shape) aBox1 = new AIS_Shape(B1);
406 myAISContext->SetMaterial(aBox1,Graphic3d_NOM_PLASTIC,Standard_False);
407 myAISContext->SetColor(aBox1,Quantity_NOC_GREEN,Standard_False);
408 myAISContext->Display(aBox1,Standard_False);
409 TopoDS_Shape B2 = BRepPrimAPI_MakeBox (gp_Ax2(gp_Pnt(-200.,-80.,-70.),
411 80., 90., 120.).Shape();
412 Handle(AIS_Shape) aBox2 = new AIS_Shape(B2);
413 myAISContext->SetMaterial(aBox2,Graphic3d_NOM_PLASTIC,Standard_False);
414 myAISContext->SetColor(aBox2,Quantity_NOC_RED,Standard_False);
415 myAISContext->Display(aBox2,Standard_False);
417 TCollection_AsciiString Message ("\
419 TopoDS_Shape B1 = BRepPrimAPI_MakeBox (200.,150.,100.); \n\
420 TopoDS_Shape B2 = BRepPrimAPI_MakeBox (gp_Ax2(gp_Pnt(-200.,-80.,-70.), \n\
421 gp_Dir(1.,2.,1.)), \n\
424 PocessTextInDialog("Make a topological box", Message);
427 void CModelingDoc::OnCylinder()
429 AIS_ListOfInteractive aList;
430 myAISContext->DisplayedObjects(aList);
431 AIS_ListIteratorOfListOfInteractive aListIterator;
432 for(aListIterator.Initialize(aList);aListIterator.More();aListIterator.Next()){
433 myAISContext->Remove (aListIterator.Value(), Standard_False);
436 TopoDS_Shape C1 = BRepPrimAPI_MakeCylinder(50., 200.).Shape();
437 Handle(AIS_Shape) aCyl1 = new AIS_Shape(C1);
438 myAISContext->SetMaterial(aCyl1,Graphic3d_NOM_PLASTIC,Standard_False);
439 myAISContext->SetColor(aCyl1,Quantity_NOC_RED,Standard_False);
440 myAISContext->Display(aCyl1,Standard_False);
441 TopoDS_Shape C2 = BRepPrimAPI_MakeCylinder (gp_Ax2(gp_Pnt(200.,200.,0.),
443 40., 110., 210.*M_PI / 180).Shape();
444 Handle(AIS_Shape) aCyl2 = new AIS_Shape(C2);
445 myAISContext->SetMaterial(aCyl2,Graphic3d_NOM_PLASTIC,Standard_False);
446 myAISContext->SetColor(aCyl2,Quantity_NOC_MATRABLUE,Standard_False);
447 myAISContext->Display(aCyl2,Standard_False);
450 TCollection_AsciiString Message ("\
452 TopoDS_Shape C1 = BRepPrimAPI_MakeCylinder (50.,200.); \n\
453 TopoDS_Shape C2 = BRepPrimAPI_MakeCylinder (gp_Ax2(gp_Pnt(200.,200.,0.), \n\
454 gp_Dir(0.,0.,1.)), \n\
455 40.,110.,210.*PI180.); \n\
457 PocessTextInDialog("Make a cylinder", Message);
461 void CModelingDoc::OnCone()
463 AIS_ListOfInteractive aList;
464 myAISContext->DisplayedObjects(aList);
465 AIS_ListIteratorOfListOfInteractive aListIterator;
466 for(aListIterator.Initialize(aList);aListIterator.More();aListIterator.Next()){
467 myAISContext->Remove (aListIterator.Value(), Standard_False);
469 TopoDS_Shape C1 = BRepPrimAPI_MakeCone(50., 25., 200.).Shape();
470 Handle(AIS_Shape) ais1 = new AIS_Shape(C1);
471 myAISContext->SetMaterial(ais1,Graphic3d_NOM_PLASTIC,Standard_False);
472 myAISContext->SetColor(ais1,Quantity_NOC_MATRABLUE,Standard_False);
473 myAISContext->Display(ais1,Standard_False);
474 TopoDS_Shape C2 = BRepPrimAPI_MakeCone(gp_Ax2(gp_Pnt(100.,100.,0.),
476 60., 0., 150., 210.*M_PI / 180).Shape();
477 Handle(AIS_Shape) ais2 = new AIS_Shape(C2);
478 myAISContext->SetMaterial(ais2,Graphic3d_NOM_PLASTIC,Standard_False);
479 myAISContext->SetColor(ais2,Quantity_NOC_GREEN,Standard_False);
480 myAISContext->Display(ais2,Standard_False);
483 TCollection_AsciiString Message ("\
485 TopoDS_Shape C1 = BRepPrimAPI_MakeCone (50.,25.,200.); \n\
486 TopoDS_Shape C2 = BRepPrimAPI_MakeCone(gp_Ax2(gp_Pnt(100.,100.,0.), \n\
487 gp_Dir(0.,0.,1.)), \n\
488 605.,0.,150.,210.*PI180); \n\
490 PocessTextInDialog("Make a cone", Message);
493 void CModelingDoc::OnSphere()
495 AIS_ListOfInteractive aList;
496 myAISContext->DisplayedObjects(aList);
497 AIS_ListIteratorOfListOfInteractive aListIterator;
498 for(aListIterator.Initialize(aList);aListIterator.More();aListIterator.Next()){
499 myAISContext->Remove (aListIterator.Value(), Standard_False);
502 TopoDS_Shape S1 = BRepPrimAPI_MakeSphere(gp_Pnt(-200., -250., 0.), 80.).Shape();
503 Handle(AIS_Shape) ais1 = new AIS_Shape(S1);
504 myAISContext->SetColor(ais1,Quantity_NOC_AZURE,Standard_False);
505 myAISContext->SetMaterial(ais1,Graphic3d_NOM_PLASTIC,Standard_False);
506 myAISContext->Display(ais1,Standard_False);
507 TopoDS_Shape S2 = BRepPrimAPI_MakeSphere(100., 120.*M_PI / 180).Shape();
508 Handle(AIS_Shape) ais2 = new AIS_Shape(S2);
509 myAISContext->SetColor(ais2,Quantity_NOC_GREEN,Standard_False);
510 myAISContext->SetMaterial(ais2,Graphic3d_NOM_PLASTIC,Standard_False);
511 myAISContext->Display(ais2,Standard_False);
512 TopoDS_Shape S3 = BRepPrimAPI_MakeSphere(gp_Pnt(200.,250.,0.),100.,
513 -60.*M_PI / 180, 60.*M_PI / 180).Shape();
514 Handle(AIS_Shape) ais3 = new AIS_Shape(S3);
515 myAISContext->SetColor(ais3,Quantity_NOC_RED,Standard_False);
516 myAISContext->SetMaterial(ais3,Graphic3d_NOM_PLASTIC,Standard_False);
517 myAISContext->Display(ais3,Standard_False);
518 TopoDS_Shape S4 = BRepPrimAPI_MakeSphere(gp_Pnt(0.,0.,-300.),150.,
519 -45.*M_PI / 180, 45.*M_PI / 180, 45.*M_PI / 180).Shape();
520 Handle(AIS_Shape) ais4 = new AIS_Shape(S4);
521 myAISContext->SetColor(ais4,Quantity_NOC_MATRABLUE,Standard_False);
522 myAISContext->SetMaterial(ais4,Graphic3d_NOM_PLASTIC,Standard_False);
523 myAISContext->Display(ais4,Standard_False);
526 TCollection_AsciiString Message ("\
528 TopoDS_Shape S1 = BRepPrimAPI_MakeSphere(gp_Pnt(-200.,-250.,0.),80.); \n\
529 TopoDS_Shape S2 = BRepPrimAPI_MakeSphere(100.,120.*PI180); \n\
530 TopoDS_Shape S3 = BRepPrimAPI_MakeSphere(gp_Pnt(200.,250.,0.),100., \n\
531 -60.*PI180, 60.*PI180); \n\
532 TopoDS_Shape S4 = BRepPrimAPI_MakeSphere(gp_Pnt(0.,0.,-300.),150., \n\
533 -45.*PI180, 45.*PI180, 45.*PI180); \n\
535 PocessTextInDialog("Make a sphere", Message);
538 void CModelingDoc::OnTorus()
540 AIS_ListOfInteractive aList;
541 myAISContext->DisplayedObjects(aList);
542 AIS_ListIteratorOfListOfInteractive aListIterator;
543 for(aListIterator.Initialize(aList);aListIterator.More();aListIterator.Next()){
544 myAISContext->Remove (aListIterator.Value(), Standard_False);
547 TopoDS_Shape S1 = BRepPrimAPI_MakeTorus(60., 20.).Shape();
548 Handle(AIS_Shape) ais1 = new AIS_Shape(S1);
549 myAISContext->SetColor(ais1,Quantity_NOC_AZURE,Standard_False);
550 myAISContext->SetMaterial(ais1,Graphic3d_NOM_PLASTIC,Standard_False);
551 myAISContext->Display(ais1,Standard_False);
552 TopoDS_Shape S2 = BRepPrimAPI_MakeTorus(gp_Ax2(gp_Pnt(100.,100.,0.),gp_Dir(1.,1.,1.)),
553 50., 20., 210.*M_PI / 180).Shape();
554 Handle(AIS_Shape) ais2 = new AIS_Shape(S2);
555 myAISContext->SetColor(ais2,Quantity_NOC_GREEN,Standard_False);
556 myAISContext->SetMaterial(ais2,Graphic3d_NOM_PLASTIC,Standard_False);
557 myAISContext->Display(ais2,Standard_False);
558 TopoDS_Shape S3 = BRepPrimAPI_MakeTorus(gp_Ax2(gp_Pnt(-200.,-150.,-100),gp_Dir(0.,1.,0.)),
559 60., 20., -45.*M_PI / 180, 45.*M_PI / 180, 90.*M_PI / 180).Shape();
560 Handle(AIS_Shape) ais3= new AIS_Shape(S3);
561 myAISContext->SetColor(ais3,Quantity_NOC_CORAL,Standard_False);
562 myAISContext->SetMaterial(ais3,Graphic3d_NOM_PLASTIC,Standard_False);
563 myAISContext->Display(ais3,Standard_False);
566 TCollection_AsciiString Message ("\
568 TopoDS_Shape S1 = BRepPrimAPI_MakeTorus(60.,20.); \n\
569 TopoDS_Shape S2 = BRepPrimAPI_MakeTorus(gp_Ax2(gp_Pnt(100.,100.,0.),gp_Dir(1.,1.,1.)), \n\
570 50.,20.,210.*PI180); \n\
571 TopoDS_Shape S3 = BRepPrimAPI_MakeTorus(gp_Ax2(gp_Pnt(-200.,-150.,-100),gp_Dir(0.,1.,0.)), \n\
572 60.,20.,-45.*PI180,45.*PI180,90.*PI180); \n\
574 PocessTextInDialog("Make a torus", Message);
577 void CModelingDoc::OnWedge()
579 AIS_ListOfInteractive aList;
580 myAISContext->DisplayedObjects(aList);
581 AIS_ListIteratorOfListOfInteractive aListIterator;
582 for(aListIterator.Initialize(aList);aListIterator.More();aListIterator.Next()){
583 myAISContext->Remove (aListIterator.Value(), Standard_False);
586 TopoDS_Shape S1 = BRepPrimAPI_MakeWedge(60., 100., 80., 20.).Shape();
587 Handle(AIS_Shape) ais1 = new AIS_Shape(S1);
588 myAISContext->SetColor(ais1,Quantity_NOC_AZURE,Standard_False);
589 myAISContext->SetMaterial(ais1,Graphic3d_NOM_PLASTIC,Standard_False);
590 myAISContext->Display(ais1,Standard_False);
591 TopoDS_Shape S2 = BRepPrimAPI_MakeWedge(gp_Ax2(gp_Pnt(100.,100.,0.),gp_Dir(0.,0.,1.)),
592 60., 50., 80., 25., -10., 40., 70.).Shape();
593 Handle(AIS_Shape) ais2 = new AIS_Shape(S2);
594 myAISContext->SetColor(ais2,Quantity_NOC_CORAL2,Standard_False);
595 myAISContext->SetMaterial(ais2,Graphic3d_NOM_PLASTIC,Standard_False);
596 myAISContext->Display(ais2,Standard_False);
599 TCollection_AsciiString Message ("\
601 TopoDS_Shape S1 = BRepPrimAPI_MakeWedge(60.,100.,80.,20.); \n\
602 TopoDS_Shape S2 = BRepPrimAPI_MakeWedge(gp_Ax2(gp_Pnt(100.,100.,0.),gp_Dir(0.,0.,1.)), \n\
603 60.,50.,80.,25.,-10.,40.,70.); \n\
605 PocessTextInDialog("Make a wedge", Message);
608 void CModelingDoc::OnPrism()
610 AIS_ListOfInteractive aList;
611 myAISContext->DisplayedObjects(aList);
612 AIS_ListIteratorOfListOfInteractive aListIterator;
613 for(aListIterator.Initialize(aList);aListIterator.More();aListIterator.Next()){
614 myAISContext->Remove (aListIterator.Value(), Standard_False);
617 TopoDS_Vertex V1 = BRepBuilderAPI_MakeVertex(gp_Pnt(-200.,-200.,0.));
618 Handle(AIS_Shape) ais1 = new AIS_Shape(V1);
619 myAISContext->Display(ais1,Standard_False);
620 TopoDS_Shape S1 = BRepPrimAPI_MakePrism(V1,gp_Vec(0.,0.,100.));
621 Handle(AIS_Shape) ais2 = new AIS_Shape(S1);
622 myAISContext->Display(ais2,Standard_False);
624 TopoDS_Edge E = BRepBuilderAPI_MakeEdge(gp_Pnt(-150.,-150,0.), gp_Pnt(-50.,-50,0.));
625 Handle(AIS_Shape) ais3 = new AIS_Shape(E);
626 myAISContext->Display(ais3,Standard_False);
627 TopoDS_Shape S2 = BRepPrimAPI_MakePrism(E,gp_Vec(0.,0.,100.));
628 Handle(AIS_Shape) ais4 = new AIS_Shape(S2);
629 myAISContext->SetColor(ais4,Quantity_NOC_CORAL2,Standard_False);
630 myAISContext->SetMaterial(ais4,Graphic3d_NOM_PLASTIC,Standard_False);
631 myAISContext->Display(ais4,Standard_False);
633 TopoDS_Edge E1 = BRepBuilderAPI_MakeEdge(gp_Pnt(0.,0.,0.), gp_Pnt(50.,0.,0.));
634 TopoDS_Edge E2 = BRepBuilderAPI_MakeEdge(gp_Pnt(50.,0.,0.), gp_Pnt(50.,50.,0.));
635 TopoDS_Edge E3 = BRepBuilderAPI_MakeEdge(gp_Pnt(50.,50.,0.), gp_Pnt(0.,0.,0.));
636 TopoDS_Wire W = BRepBuilderAPI_MakeWire(E1,E2,E3);
637 TopoDS_Shape S3 = BRepPrimAPI_MakePrism(W,gp_Vec(0.,0.,100.));
638 Handle(AIS_Shape) ais5 = new AIS_Shape(W);
639 myAISContext->Display(ais5,Standard_False);
640 Handle(AIS_Shape) ais6 = new AIS_Shape(S3);
641 myAISContext->SetColor(ais6,Quantity_NOC_GREEN,Standard_False);
642 myAISContext->SetMaterial(ais6,Graphic3d_NOM_PLASTIC,Standard_False);
643 myAISContext->Display(ais6,Standard_False);
645 gp_Circ c = gp_Circ(gp_Ax2(gp_Pnt(200.,200.,0.),gp_Dir(0.,0.,1.)), 80.);
646 TopoDS_Edge Ec = BRepBuilderAPI_MakeEdge(c);
647 TopoDS_Wire Wc = BRepBuilderAPI_MakeWire(Ec);
648 TopoDS_Face F = BRepBuilderAPI_MakeFace(gp_Pln(gp::XOY()),Wc);
649 Handle(AIS_Shape) ais7 = new AIS_Shape(F);
650 myAISContext->Display(ais7,Standard_False);
651 TopoDS_Shape S4 = BRepPrimAPI_MakePrism(F,gp_Vec(0.,0.,100.));
652 Handle(AIS_Shape) ais8 = new AIS_Shape(S4);
653 myAISContext->SetColor(ais8,Quantity_NOC_MATRABLUE,Standard_False);
654 myAISContext->SetMaterial(ais8,Graphic3d_NOM_PLASTIC,Standard_False);
655 myAISContext->Display(ais8,Standard_False);
658 TCollection_AsciiString Message ("\
660 --- Prism a vertex -> result is an edge --- \n\
662 TopoDS_Vertex V1 = BRepBuilderAPI_MakeVertex(gp_Pnt(-200.,-200.,0.)); \n\
663 TopoDS_Shape S1 = BRepBuilderAPI_MakePrism(V1,gp_Vec(0.,0.,100.)); \n\
665 --- Prism an edge -> result is a face --- \n\
667 TopoDS_Edge E = BRepBuilderAPI_MakeEdge(gp_Pnt(-150.,-150,0.), gp_Pnt(-50.,-50,0.)); \n\
668 TopoDS_Shape S2 = BRepPrimAPI_MakePrism(E,gp_Vec(0.,0.,100.)); \n\
670 --- Prism an wire -> result is a shell --- \n\
672 TopoDS_Edge E1 = BREpBuilderAPI_MakeEdge(gp_Pnt(0.,0.,0.), gp_Pnt(50.,0.,0.)); \n\
673 TopoDS_Edge E2 = BREpBuilderAPI_MakeEdge(gp_Pnt(50.,0.,0.), gp_Pnt(50.,50.,0.)); \n\
674 TopoDS_Edge E3 = BREpBuilderAPI_MakeEdge(gp_Pnt(50.,50.,0.), gp_Pnt(0.,0.,0.)); \n\
675 TopoDS_Wire W = BRepBuilderAPI_MakeWire(E1,E2,E3); \n\
676 TopoDS_Shape S3 = BRepPrimAPI_MakePrism(W,gp_Vec(0.,0.,100.)); \n\
678 --- Prism a face or a shell -> result is a solid --- \n\
680 gp_Circ c = gp_Circ(gp_Ax2(gp_Pnt(200.,200.,0.gp_Dir(0.,0.,1.)), 80.); \n\
681 TopoDS_Edge Ec = BRepBuilderAPI_MakeEdge(c); \n\
682 TopoDS_Wire Wc = BRepBuilderAPI_MakeWire(Ec); \n\
683 TopoDS_Face F = BRepBuilderAPI_MakeFace(gp::XOY(),Wc); \n\
684 TopoDS_Shape S4 = BRepBuilderAPI_MakePrism(F,gp_Vec(0.,0.,100.)); \n\
686 PocessTextInDialog("Make a prism", Message);
689 void CModelingDoc::OnRevol()
691 AIS_ListOfInteractive aList;
692 myAISContext->DisplayedObjects(aList);
693 AIS_ListIteratorOfListOfInteractive aListIterator;
694 for(aListIterator.Initialize(aList);aListIterator.More();aListIterator.Next()){
695 myAISContext->Remove (aListIterator.Value(), Standard_False);
698 TopoDS_Vertex V1 = BRepBuilderAPI_MakeVertex(gp_Pnt(-200.,-200.,0.));
699 Handle(AIS_Shape) ais1 = new AIS_Shape(V1);
700 myAISContext->Display(ais1,Standard_False);
701 gp_Ax1 axe = gp_Ax1(gp_Pnt(-170.,-170.,0.),gp_Dir(0.,0.,1.));
702 Handle(Geom_Axis1Placement) Gax1 = new Geom_Axis1Placement(axe);
703 Handle (AIS_Axis) ax1 = new AIS_Axis(Gax1);
704 myAISContext->Display(ax1,Standard_False);
705 TopoDS_Shape S1 = BRepPrimAPI_MakeRevol(V1,axe);
706 Handle(AIS_Shape) ais2 = new AIS_Shape(S1);
707 myAISContext->Display(ais2,Standard_False);
709 TopoDS_Edge E = BRepBuilderAPI_MakeEdge(gp_Pnt(-120.,-120,0.), gp_Pnt(-120.,-120,100.));
710 Handle(AIS_Shape) ais3 = new AIS_Shape(E);
711 myAISContext->Display(ais3,Standard_False);
712 axe = gp_Ax1(gp_Pnt(-100.,-100.,0.),gp_Dir(0.,0.,1.));
713 Handle(Geom_Axis1Placement) Gax2 = new Geom_Axis1Placement(axe);
714 Handle (AIS_Axis) ax2 = new AIS_Axis(Gax2);
715 myAISContext->Display(ax2,Standard_False);
716 TopoDS_Shape S2 = BRepPrimAPI_MakeRevol(E,axe);
717 Handle(AIS_Shape) ais4 = new AIS_Shape(S2);
718 myAISContext->SetColor(ais4,Quantity_NOC_YELLOW,Standard_False);
719 myAISContext->SetMaterial(ais4,Graphic3d_NOM_PLASTIC,Standard_False);
720 myAISContext->Display(ais4,Standard_False);
722 TopoDS_Edge E1 = BRepBuilderAPI_MakeEdge(gp_Pnt(0.,0.,0.), gp_Pnt(50.,0.,0.));
723 TopoDS_Edge E2 = BRepBuilderAPI_MakeEdge(gp_Pnt(50.,0.,0.), gp_Pnt(50.,50.,0.));
724 TopoDS_Edge E3 = BRepBuilderAPI_MakeEdge(gp_Pnt(50.,50.,0.), gp_Pnt(0.,0.,0.));
725 TopoDS_Wire W = BRepBuilderAPI_MakeWire(E1,E2,E3);
726 axe = gp_Ax1(gp_Pnt(0.,0.,30.),gp_Dir(0.,1.,0.));
727 Handle(Geom_Axis1Placement) Gax3 = new Geom_Axis1Placement(axe);
728 Handle (AIS_Axis) ax3 = new AIS_Axis(Gax3);
729 myAISContext->Display(ax3,Standard_False);
730 TopoDS_Shape S3 = BRepPrimAPI_MakeRevol(W,axe, 210.*M_PI/180);
731 Handle(AIS_Shape) ais5 = new AIS_Shape(W);
732 myAISContext->Display(ais5,Standard_False);
733 Handle(AIS_Shape) ais6 = new AIS_Shape(S3);
734 myAISContext->SetColor(ais6,Quantity_NOC_GREEN,Standard_False);
735 myAISContext->SetMaterial(ais6,Graphic3d_NOM_PLASTIC,Standard_False);
736 myAISContext->Display(ais6,Standard_False);
738 gp_Circ c = gp_Circ(gp_Ax2(gp_Pnt(200.,200.,0.),gp_Dir(0.,0.,1.)), 80.);
739 TopoDS_Edge Ec = BRepBuilderAPI_MakeEdge(c);
740 TopoDS_Wire Wc = BRepBuilderAPI_MakeWire(Ec);
741 TopoDS_Face F = BRepBuilderAPI_MakeFace(gp_Pln(gp::XOY()),Wc);
742 axe = gp_Ax1(gp_Pnt(290,290.,0.),gp_Dir(0.,1,0.));
743 Handle(Geom_Axis1Placement) Gax4 = new Geom_Axis1Placement(axe);
744 Handle (AIS_Axis) ax4 = new AIS_Axis(Gax4);
745 myAISContext->Display(ax4,Standard_False);
746 TopoDS_Shape S4 = BRepPrimAPI_MakeRevol(F,axe, 90.*M_PI/180);
747 Handle(AIS_Shape) ais8 = new AIS_Shape(S4);
748 myAISContext->SetColor(ais8,Quantity_NOC_MATRABLUE,Standard_False);
749 myAISContext->SetMaterial(ais8,Graphic3d_NOM_PLASTIC,Standard_False);
750 myAISContext->Display(ais8,Standard_False);
753 TCollection_AsciiString Message ("\
755 --- Revol of a vertex -> result is an edge --- \n\
757 TopoDS_Vertex V1 = BRepBuilderAPI_MakeVertex(gp_Pnt(-200.,-200.,0.)); \n\
758 gp_Ax1 axe = gp_Ax1(gp_Pnt(-170.,-170.,0.),gp_Dir(0.,0.,1.)); \n\
759 TopoDS_Shape S1 = BRepPrimAPI_MakeRevol(V1,axe); \n\
761 --- Revol of an edge -> result is a face --- \n\
763 TopoDS_Edge E = BRepBuilderAPI_MakeEdge(gp_Pnt(-120.,-120,0.), gp_Pnt(-120.,-120,100.)); \n\
764 axe = gp_Ax1(gp_Pnt(-100.,-100.,0.),gp_Dir(0.,0.,1.)); \n\
765 TopoDS_Shape S2 = BRepPrimAPI_MakeRevol(E,axe); \n\
767 --- Revol of a wire -> result is a shell --- \n\
769 TopoDS_Edge E1 = BRepBuilderAPI_MakeEdge(gp_Pnt(0.,0.,0.), gp_Pnt(50.,0.,0.)); \n\
770 TopoDS_Edge E2 = BRepBuilderAPI_MakeEdge(gp_Pnt(50.,0.,0.), gp_Pnt(50.,50.,0.)); \n\
771 TopoDS_Edge E3 = BRepBuilderAPI_MakeEdge(gp_Pnt(50.,50.,0.), gp_Pnt(0.,0.,0.)); \n\
772 TopoDS_Wire W = BRepBuilderAPI_MakeWire(E1,E2,E3); \n\
773 axe = gp_Ax1(gp_Pnt(0.,0.,30.),gp_Dir(0.,1.,0.)); \n\
774 TopoDS_Shape S3 = BRepPrimAPI_MakeRevol(W,axe, 210.*PI180); \n\
776 --- Revol of a face -> result is a solid --- \n\
778 gp_Circ c = gp_Circ(gp_Ax2(gp_Pnt(200.,200.,0.),gp_Dir(0.,0.,1.)), 80.); \n\
779 TopoDS_Edge Ec = BRepBuilderAPI_MakeEdge(c); \n\
780 TopoDS_Wire Wc = BRepBuilderPI_MakeWire(Ec); \n\
781 TopoDS_Face F = BRepBuilderAPI_MakeFace(gp_Pln(gp::XOY()),Wc); \n\
782 axe = gp_Ax1(gp_Pnt(290,290.,0.),gp_Dir(0.,1,0.)); \n\
783 TopoDS_Shape S4 = BRepPrimAPI_MakeRevol(F,axe, 90.*PI180); \n\
785 PocessTextInDialog("Make a revol", Message);
788 void CModelingDoc::OnPipe()
790 AIS_ListOfInteractive aList;
791 myAISContext->DisplayedObjects(aList);
792 AIS_ListIteratorOfListOfInteractive aListIterator;
793 for(aListIterator.Initialize(aList);aListIterator.More();aListIterator.Next()){
794 myAISContext->Remove (aListIterator.Value(), Standard_False);
797 TColgp_Array1OfPnt CurvePoles(1,4);
798 gp_Pnt pt = gp_Pnt(0.,0.,0.);
800 pt = gp_Pnt(20.,50.,0.);
802 pt = gp_Pnt(60.,100.,0.);
804 pt = gp_Pnt(150.,0.,0.);
806 Handle(Geom_BezierCurve) curve = new Geom_BezierCurve(CurvePoles);
807 TopoDS_Edge E = BRepBuilderAPI_MakeEdge(curve);
808 TopoDS_Wire W = BRepBuilderAPI_MakeWire(E);
809 Handle(AIS_Shape) ais1 = new AIS_Shape(W);
810 myAISContext->Display(ais1,Standard_False);
813 gp_Circ c = gp_Circ(gp_Ax2(gp_Pnt(0.,0.,0.),gp_Dir(0.,1.,0.)),10.);
814 TopoDS_Edge Ec = BRepBuilderAPI_MakeEdge(c);
815 TopoDS_Wire Wc = BRepBuilderAPI_MakeWire(Ec);
816 Handle(AIS_Shape) ais3 = new AIS_Shape(Wc);
817 myAISContext->Display(ais3,Standard_False);
818 TopoDS_Face F = BRepBuilderAPI_MakeFace(gp_Pln(gp::ZOX()),Wc);
819 TopoDS_Shape S = BRepOffsetAPI_MakePipe(W,F);
820 Handle(AIS_Shape) ais2 = new AIS_Shape(S);
821 myAISContext->SetColor(ais2,Quantity_NOC_MATRABLUE,Standard_False);
822 myAISContext->SetMaterial(ais2,Graphic3d_NOM_PLASTIC,Standard_False);
823 myAISContext->Display(ais2,Standard_False);
826 TCollection_AsciiString Message ("\
828 TColgp_Array1OfPnt CurvePoles(1,6);\n\
829 gp_Pnt pt = gp_Pnt(0.,0.,0.);\n\
830 CurvePoles(1) = pt;\n\
831 pt = gp_Pnt(20.,50.,0.);\n\
832 CurvePoles(2) = pt;\n\
833 pt = gp_Pnt(60.,100.,0.);\n\
834 CurvePoles(3) = pt;\n\
835 pt = gp_Pnt(150.,0.,0.);\n\
836 CurvePoles(4) = pt;\n\
837 Handle(Geom_BezierCurve) curve = new Geom_BezierCurve(CurvePoles);\n\
838 TopoDS_Edge E = BRepBuilderAPI_MakeEdge(curve);\n\
839 TopoDS_Wire W = BRepBuilderAPI_MakeWire(E);\n\
840 gp_Circ c = gp_Circ(gp_Ax2(gp_Pnt(0.,0.,0.),gp_Dir(0.,1.,0.)),10.);\n\
841 TopoDS_Edge Ec = BRepBuilderAPI_MakeEdge(c);\n\
842 TopoDS_Wire Wc = BRepBuilderAPI_MakeWire(Ec);\n\
843 TopoDS_Face F = BRepBuilderAPI_MakeFace(gp_Pln(gp::ZOX()),Wc);\n\
844 TopoDS_Shape S = BRepBuilderAPI_MakePipe(W,F);\n\
846 PocessTextInDialog("Make a pipe", Message);
850 void CModelingDoc::OnThru()
852 AIS_ListOfInteractive aList;
853 myAISContext->DisplayedObjects(aList);
854 AIS_ListIteratorOfListOfInteractive aListIterator;
855 for(aListIterator.Initialize(aList);aListIterator.More();aListIterator.Next()){
856 myAISContext->Remove (aListIterator.Value(), Standard_False);
859 gp_Circ c1 = gp_Circ(gp_Ax2(gp_Pnt(-100.,0.,-100.),gp_Dir(0.,0.,1.)),40.);
860 TopoDS_Edge E1 = BRepBuilderAPI_MakeEdge(c1);
861 TopoDS_Wire W1 = BRepBuilderAPI_MakeWire(E1);
862 Handle(AIS_Shape) sec1 = new AIS_Shape(W1);
863 myAISContext->Display(sec1,Standard_False);
864 gp_Circ c2 = gp_Circ(gp_Ax2(gp_Pnt(-10.,0.,-0.),gp_Dir(0.,0.,1.)),40.);
865 TopoDS_Edge E2 = BRepBuilderAPI_MakeEdge(c2);
866 TopoDS_Wire W2 = BRepBuilderAPI_MakeWire(E2);
867 Handle(AIS_Shape) sec2 = new AIS_Shape(W2);
868 myAISContext->Display(sec2,Standard_False);
869 gp_Circ c3 = gp_Circ(gp_Ax2(gp_Pnt(-75.,0.,100.),gp_Dir(0.,0.,1.)),40.);
870 TopoDS_Edge E3 = BRepBuilderAPI_MakeEdge(c3);
871 TopoDS_Wire W3 = BRepBuilderAPI_MakeWire(E3);
872 Handle(AIS_Shape) sec3 = new AIS_Shape(W3);
873 myAISContext->Display(sec3,Standard_False);
874 gp_Circ c4= gp_Circ(gp_Ax2(gp_Pnt(0.,0.,200.),gp_Dir(0.,0.,1.)),40.);
875 TopoDS_Edge E4 = BRepBuilderAPI_MakeEdge(c4);
876 TopoDS_Wire W4 = BRepBuilderAPI_MakeWire(E4);
877 Handle(AIS_Shape) sec4 = new AIS_Shape(W4);
878 myAISContext->Display(sec4,Standard_False);
879 BRepOffsetAPI_ThruSections generator(Standard_False,Standard_True);
880 generator.AddWire(W1);
881 generator.AddWire(W2);
882 generator.AddWire(W3);
883 generator.AddWire(W4);
885 TopoDS_Shape S1 = generator.Shape();
886 Handle(AIS_Shape) ais1 = new AIS_Shape(S1);
887 myAISContext->SetColor(ais1,Quantity_NOC_MATRABLUE,Standard_False);
888 myAISContext->SetMaterial(ais1,Graphic3d_NOM_PLASTIC,Standard_False);
889 myAISContext->Display(ais1,Standard_False);
891 gp_Circ c1b = gp_Circ(gp_Ax2(gp_Pnt(100.,0.,-100.),gp_Dir(0.,0.,1.)),40.);
892 TopoDS_Edge E1b = BRepBuilderAPI_MakeEdge(c1b);
893 TopoDS_Wire W1b = BRepBuilderAPI_MakeWire(E1b);
894 Handle(AIS_Shape) sec1b = new AIS_Shape(W1b);
895 myAISContext->Display(sec1b,Standard_False);
896 gp_Circ c2b = gp_Circ(gp_Ax2(gp_Pnt(210.,0.,-0.),gp_Dir(0.,0.,1.)),40.);
897 TopoDS_Edge E2b = BRepBuilderAPI_MakeEdge(c2b);
898 TopoDS_Wire W2b = BRepBuilderAPI_MakeWire(E2b);
899 Handle(AIS_Shape) sec2b = new AIS_Shape(W2b);
900 myAISContext->Display(sec2b,Standard_False);
901 gp_Circ c3b = gp_Circ(gp_Ax2(gp_Pnt(275.,0.,100.),gp_Dir(0.,0.,1.)),40.);
902 TopoDS_Edge E3b = BRepBuilderAPI_MakeEdge(c3b);
903 TopoDS_Wire W3b = BRepBuilderAPI_MakeWire(E3b);
904 Handle(AIS_Shape) sec3b = new AIS_Shape(W3b);
905 myAISContext->Display(sec3b,Standard_False);
906 gp_Circ c4b= gp_Circ(gp_Ax2(gp_Pnt(200.,0.,200.),gp_Dir(0.,0.,1.)),40.);
907 TopoDS_Edge E4b = BRepBuilderAPI_MakeEdge(c4b);
908 TopoDS_Wire W4b = BRepBuilderAPI_MakeWire(E4b);
909 Handle(AIS_Shape) sec4b = new AIS_Shape(W4b);
910 myAISContext->Display(sec4b,Standard_False);
911 BRepOffsetAPI_ThruSections generatorb(Standard_True,Standard_False);
912 generatorb.AddWire(W1b);
913 generatorb.AddWire(W2b);
914 generatorb.AddWire(W3b);
915 generatorb.AddWire(W4b);
917 TopoDS_Shape S2 = generatorb.Shape();
918 Handle(AIS_Shape) ais2 = new AIS_Shape(S2);
919 myAISContext->SetColor(ais2,Quantity_NOC_ALICEBLUE,Standard_False);
920 myAISContext->SetMaterial(ais2,Graphic3d_NOM_PLASTIC,Standard_False);
921 myAISContext->Display(ais2,Standard_False);
924 TCollection_AsciiString Message ("\
926 ---------- ruled -------------- \n\
928 gp_Circ c1 = gp_Circ(gp_Ax2(gp_Pnt(-100.,0.,-100.),gp_Dir(0.,0.,1.)),40.);\n\
929 TopoDS_Edge E1 = BRepBuilderAPI_MakeEdge(c1);\n\
930 TopoDS_Wire W1 = BRepBuilderAPI_MakeWire(E1);\n\
931 gp_Circ c2 = gp_Circ(gp_Ax2(gp_Pnt(-10.,0.,-0.),gp_Dir(0.,0.,1.)),40.);\n\
932 TopoDS_Edge E2 = BRepBuilderAPI_MakeEdge(c2);\n\
933 TopoDS_Wire W2 = BRepBuilderAPI_MakeWire(E2);\n\
934 gp_Circ c3 = gp_Circ(gp_Ax2(gp_Pnt(-75.,0.,100.),gp_Dir(0.,0.,1.)),40.);\n\
935 TopoDS_Edge E3 = BRepBuilderAPI_MakeEdge(c3);\n\
936 TopoDS_Wire W3 = BRepBuilderAPI_MakeWire(E3);\n\
937 gp_Circ c4= gp_Circ(gp_Ax2(gp_Pnt(0.,0.,200.),gp_Dir(0.,0.,1.)),40.);\n\
938 TopoDS_Edge E4 = BRep>BuilderAPI_MakeEdge(c4);\n\
939 TopoDS_Edge E4 = BRepBuilderAPI_MakeEdge(c4);\n\
940 TopoDS_Edge E4 = BRepBuilderAPI_MakeEdge(c4);\n\
941 TopoDS_Wire W4 = BRepBuilderAPI_MakeWire(E4);\n\
942 BRepOffsetAPI_ThruSections generator(Standard_False,Standard_True);\n\
943 generator.AddWire(W1);\n\
944 generator.AddWire(W2);\n\
945 generator.AddWire(W3);\n\
946 generator.AddWire(W4);\n\
947 generator.Build();\n\
948 TopoDS_Shape S1 = generator.Shape();\n\
950 ---------- smooth -------------- \n\
952 gp_Circ c1b = gp_Circ(gp_Ax2(gp_Pnt(100.,0.,-100.),gp_Dir(0.,0.,1.)),40.); \n\
953 TopoDS_Edge E1b = BRepBuilderAPI_MakeEdge(c1b); \n\
954 TopoDS_Wire W1b = BRepBuilderAPI_MakeWire(E1b); \n\
955 gp_Circ c2b = gp_Circ(gp_Ax2(gp_Pnt(210.,0.,-0.),gp_Dir(0.,0.,1.)),40.); \n\
956 TopoDS_Edge E2b = BRepBuilderAPI_MakeEdge(c2b);\n\
957 TopoDS_Wire W2b = BRepBuilderAPI_MakeWire(E2b); \n\
958 gp_Circ c3b = gp_Circ(gp_Ax2(gp_Pnt(275.,0.,100.),gp_Dir(0.,0.,1.)),40.);\n\
959 TopoDS_Edge E3b = BRepBuilderAPI_MakeEdge(c3b);\n\
960 TopoDS_Wire W3b = BRepBuilderAPI_MakeWire(E3b);\n\
961 gp_Circ c4b= gp_Circ(gp_Ax2(gp_Pnt(200.,0.,200.),gp_Dir(0.,0.,1.)),40.);\n\
962 TopoDS_Edge E4b = BRepBuilderAPI_MakeEdge(c4b);\n\
963 TopoDS_Wire W4b = BRepBuilderAPI_MakeWire(E4b);\n\
964 BRepOffsetAPI_ThruSections generatorb(Standard_True,Standard_False);\n\
965 generatorb.AddWire(W1b);\n\
966 generatorb.AddWire(W2b);\n\
967 generatorb.AddWire(W3b);\n\
968 generatorb.AddWire(W4b);\n\
969 generatorb.Build();\n\
970 TopoDS_Shape S2 = generatorb.Shape();\n\
972 PocessTextInDialog("Make a Thru sections", Message);
976 void CModelingDoc::OnEvolved()
978 AIS_ListOfInteractive aList;
979 myAISContext->DisplayedObjects(aList);
980 AIS_ListIteratorOfListOfInteractive aListIterator;
981 for(aListIterator.Initialize(aList);aListIterator.More();aListIterator.Next()){
982 myAISContext->Remove (aListIterator.Value(), Standard_False);
985 BRepBuilderAPI_MakePolygon P;
986 P.Add(gp_Pnt(0.,0.,0.));
987 P.Add(gp_Pnt(200.,0.,0.));
988 P.Add(gp_Pnt(200.,200.,0.));
989 P.Add(gp_Pnt(0.,200.,0.));
990 P.Add(gp_Pnt(0.,0.,0.));
991 TopoDS_Wire W = P.Wire();
993 Handle(AIS_Shape) ais1 = new AIS_Shape(W);
994 myAISContext->Display(ais1,Standard_False);
996 TopoDS_Wire wprof = BRepBuilderAPI_MakePolygon(gp_Pnt(0.,0.,0.),gp_Pnt(-60.,-60.,-200.));
998 Handle(AIS_Shape) ais3 = new AIS_Shape(wprof);
999 myAISContext->Display(ais3,Standard_False);
1002 TopoDS_Shape S = BRepOffsetAPI_MakeEvolved(W,wprof,GeomAbs_Arc,Standard_True,Standard_False,Standard_True,0.0001);
1004 Handle(AIS_Shape) ais2 = new AIS_Shape(S);
1005 myAISContext->SetColor(ais2,Quantity_NOC_MATRABLUE,Standard_False);
1006 myAISContext->SetMaterial(ais2,Graphic3d_NOM_PLASTIC,Standard_False);
1007 myAISContext->Display(ais2,Standard_False);
1010 TCollection_AsciiString Message ("\
1012 ---------- Evolved shape -------------- \n\
1014 BRepBuilderAPI_MakePolygon P;\n\
1015 P.Add(gp_Pnt(0.,0.,0.));\n\
1016 P.Add(gp_Pnt(200.,0.,0.));\n\
1017 P.Add(gp_Pnt(200.,200.,0.));\n\
1018 P.Add(gp_Pnt(0.,200.,0.));\n\
1019 P.Add(gp_Pnt(0.,0.,0.));\n\
1020 TopoDS_Wire W = P.Wire();\n\
1021 TopoDS_Wire wprof = BRepBuilderAPI_MakePolygon(gp_Pnt(0.,0.,0.),gp_Pnt(-60.,-60.,-200.));\n\
1022 TopoDS_Shape S = BRepBuilderAPI_MakeEvolved(W,wprof,GeomAbs_Arc,Standard_True,Standard_False,Standard_True,0.0001);\n\
1024 PocessTextInDialog("Make an evolved shape", Message);
1028 void CModelingDoc::OnDraft()
1030 AIS_ListOfInteractive aList;
1031 myAISContext->DisplayedObjects(aList);
1032 AIS_ListIteratorOfListOfInteractive aListIterator;
1033 for(aListIterator.Initialize(aList);aListIterator.More();aListIterator.Next()){
1034 myAISContext->Remove (aListIterator.Value(), Standard_False);
1037 TopoDS_Shape S = BRepPrimAPI_MakeBox(200., 300., 150.).Shape();
1038 Handle(AIS_Shape) ais1 = new AIS_Shape(S);
1039 myAISContext->SetColor(ais1,Quantity_NOC_GREEN,Standard_False);
1040 myAISContext->SetMaterial(ais1,Graphic3d_NOM_PLASTIC,Standard_False);
1041 myAISContext->Display(ais1,Standard_False);
1044 BRepOffsetAPI_DraftAngle adraft(S);
1046 for (Ex.Init(S,TopAbs_FACE); Ex.More(); Ex.Next()) {
1047 TopoDS_Face F = TopoDS::Face(Ex.Current());
1048 Handle(Geom_Plane) surf = Handle(Geom_Plane)::DownCast(BRep_Tool::Surface(F));
1049 gp_Pln apln = surf->Pln();
1050 gp_Dir dirF = apln.Axis().Direction();
1051 if (dirF.IsNormal(gp_Dir(0.,0.,1.),Precision::Angular()))
1052 adraft.Add(F, gp_Dir(0.,0.,1.), 15.*M_PI/180, gp_Pln(gp::XOY()));
1054 ais1->Set(adraft.Shape());
1055 myAISContext->Redisplay(ais1,Standard_False);
1058 TCollection_AsciiString Message ("\
1060 ---------- Tapered shape -------------- \n\
1062 TopoDS_Shape S = BRepPrimAPI_MakeBox(200.,300.,150.);\n\
1063 BRepOffsetAPI_DraftAngle adraft(S);\n\
1064 TopExp_Explorer Ex;\n\
1065 for (Ex.Init(S,TopAbs_FACE); Ex.More(); Ex.Next()) {\n\
1066 TopoDS_Face F = TopoDS::Face(Ex.Current());\n\
1067 Handle(Geom_Plane) surf = Handle(Geom_Plane)::DownCast(BRep_Tool::Surface(F));\n\
1068 gp_Pln apln = surf->Pln();\n\
1069 gp_Dir dirF = apln.Axis().Direction();\n\
1070 if (dirF.IsNormal(gp_Dir(0.,0.,1.),Precision::Angular()))\n\
1071 adraft.Add(F, gp_Dir(0.,0.,1.), 15.*PI180, gp_Pln(gp::XOY()));\n\
1074 PocessTextInDialog("Make a tapered shape", Message);
1078 /* =================================================================================
1079 ==================== O P E R A T I O N S ====================================
1080 ================================================================================= */
1082 void CModelingDoc::OnCut()
1084 AIS_ListOfInteractive aList;
1085 myAISContext->DisplayedObjects(aList);
1086 AIS_ListIteratorOfListOfInteractive aListIterator;
1087 for(aListIterator.Initialize(aList);aListIterator.More();aListIterator.Next()){
1088 myAISContext->Remove (aListIterator.Value(), Standard_False);
1091 TopoDS_Shape theBox = BRepPrimAPI_MakeBox(200, 60, 60).Shape();
1093 Handle (AIS_Shape) ais1 = new AIS_Shape(theBox);
1094 myAISContext->SetDisplayMode(ais1,1,Standard_False);
1095 myAISContext->SetColor(ais1,Quantity_NOC_GREEN,Standard_False);
1096 myAISContext->SetMaterial(ais1,Graphic3d_NOM_PLASTIC,Standard_False);
1097 myAISContext->Display(ais1,Standard_False);
1098 const Handle(AIS_InteractiveObject)& anIO1 = ais1;
1099 myAISContext->SetSelected (anIO1, Standard_False);
1104 TopoDS_Shape theSphere = BRepPrimAPI_MakeSphere(gp_Pnt(100, 20, 20), 80).Shape();
1105 Handle (AIS_Shape) ais2 = new AIS_Shape(theSphere);
1106 myAISContext->SetDisplayMode(ais2,1,Standard_False);
1107 myAISContext->SetColor(ais2,Quantity_NOC_YELLOW,Standard_False);
1108 myAISContext->SetMaterial(ais2,Graphic3d_NOM_PLASTIC,Standard_False);
1109 myAISContext->Display(ais2,Standard_False);
1110 const Handle(AIS_InteractiveObject)& anIO2 = ais2;
1111 myAISContext->SetSelected (anIO2, Standard_False);
1115 TopoDS_Shape ShapeCut = BRepAlgoAPI_Cut(theSphere,theBox);
1117 myAISContext->Erase(ais1,Standard_False);
1118 myAISContext->Erase(ais2,Standard_False);
1120 Handle (AIS_Shape) aSection = new AIS_Shape(ShapeCut);
1121 myAISContext->SetDisplayMode(aSection,1,Standard_False);
1122 myAISContext->SetColor(aSection,Quantity_NOC_RED,Standard_False);
1123 myAISContext->SetMaterial(aSection,Graphic3d_NOM_PLASTIC,Standard_False);
1124 myAISContext->Display(aSection,Standard_False);
1125 const Handle(AIS_InteractiveObject)& anIOSection = aSection;
1126 myAISContext->SetSelected (anIOSection, Standard_False);
1129 TCollection_AsciiString Message ("\
1131 TopoDS_Shape theBox = BRepPrimAPI_MakeBox(200,40,40); \n\
1133 TopoDS_Shape theSphere = BRepPrimAPI_MakeSphere(gp_Pnt(100,20,20),80); \n\
1135 TopoDS_Shape ShapeCut = BRepAlgoAPI_Cut(theSphere,theBox); \n\
1137 PocessTextInDialog("Cut the sphere with a box", Message);
1151 void CModelingDoc::OnFuse()
1153 AIS_ListOfInteractive aList;
1154 myAISContext->DisplayedObjects(aList);
1155 AIS_ListIteratorOfListOfInteractive aListIterator;
1156 for(aListIterator.Initialize(aList);aListIterator.More();aListIterator.Next()){
1157 myAISContext->Remove (aListIterator.Value(), Standard_False);
1161 TopoDS_Shape theBox1 = BRepPrimAPI_MakeBox(60, 200, 70).Shape();
1162 Handle (AIS_Shape) ais1 = new AIS_Shape(theBox1);
1163 myAISContext->SetColor(ais1,Quantity_NOC_GREEN,Standard_False);
1164 myAISContext->SetMaterial(ais1,Graphic3d_NOM_PLASTIC,Standard_False);
1165 myAISContext->Display(ais1,Standard_False);
1166 const Handle(AIS_InteractiveObject)& anIO1 = ais1;
1167 myAISContext->SetSelected (anIO1, Standard_False);
1171 TopoDS_Shape theBox2 = BRepPrimAPI_MakeBox(P, 20, 150, 110).Shape();
1172 Handle (AIS_Shape) ais2 = new AIS_Shape(theBox2);
1173 myAISContext->SetColor(ais2,Quantity_NOC_YELLOW,Standard_False);
1174 myAISContext->SetMaterial(ais2,Graphic3d_NOM_PLASTIC,Standard_False);
1175 myAISContext->Display(ais2,Standard_False);
1176 const Handle(AIS_InteractiveObject)& anIO2 = ais2;
1177 myAISContext->SetSelected (anIO2, Standard_False);
1181 TopoDS_Shape FusedShape = BRepAlgoAPI_Fuse(theBox1,theBox2);
1183 myAISContext->Erase(ais1,false);
1184 myAISContext->Erase(ais2,false);
1186 Handle (AIS_Shape) aFusion = new AIS_Shape(FusedShape);
1187 myAISContext->SetDisplayMode(aFusion,1,Standard_False);
1188 myAISContext->SetColor(aFusion,Quantity_NOC_RED,Standard_False);
1189 myAISContext->SetMaterial(aFusion,Graphic3d_NOM_PLASTIC,Standard_False);
1190 myAISContext->Display(aFusion,Standard_False);
1191 const Handle(AIS_InteractiveObject)& anIOFusion = aFusion;
1192 myAISContext->SetSelected (anIOFusion, Standard_False);
1193 myAISContext->UpdateCurrentViewer();
1195 TCollection_AsciiString Message ("\
1197 TopoDS_Shape theBox1 = BRepPrimAPI_MakeBox(50,200,70); \n\
1199 TopoDS_Shape theBox2 = BRepPrimAPI_MakeBox(-30,150,70); \n\
1201 TopoDS_Shape FusedShape = BRepAlgoAPI_Fuse(theBox1,theBox2); \n");
1202 PocessTextInDialog("Fuse the boxes", Message);
1206 void CModelingDoc::OnCommon()
1208 AIS_ListOfInteractive aList;
1209 myAISContext->DisplayedObjects(aList);
1210 AIS_ListIteratorOfListOfInteractive aListIterator;
1211 for(aListIterator.Initialize(aList);aListIterator.More();aListIterator.Next()){
1212 myAISContext->Remove (aListIterator.Value(), Standard_False);
1215 gp_Ax2 axe(gp_Pnt(10,10,10),gp_Dir(1,2,1));
1216 TopoDS_Shape theBox = BRepPrimAPI_MakeBox(axe, 60, 80, 100).Shape();
1218 Handle(AIS_Shape) aboxshape=new AIS_Shape(theBox);
1219 myAISContext->SetColor(aboxshape,Quantity_NOC_YELLOW,Standard_False);
1220 myAISContext->SetMaterial(aboxshape,Graphic3d_NOM_PLASTIC,Standard_False);
1221 myAISContext->SetTransparency(aboxshape,0.2,Standard_False);
1222 myAISContext->Display(aboxshape, AIS_Shaded, 0, Standard_False);
1223 const Handle(AIS_InteractiveObject)& anIOBoxShape = aboxshape;
1224 myAISContext->SetSelected (anIOBoxShape, Standard_False);
1228 TopoDS_Shape theWedge = BRepPrimAPI_MakeWedge(60., 100., 80., 20.).Shape();
1230 Handle(AIS_Shape) awedge = new AIS_Shape(theWedge);
1231 myAISContext->SetColor(awedge,Quantity_NOC_RED,Standard_False);
1232 myAISContext->SetMaterial(awedge,Graphic3d_NOM_PLASTIC,Standard_False);
1233 myAISContext->SetTransparency(awedge,0.0,Standard_False);
1234 myAISContext->Display(awedge,Standard_False);
1235 const Handle(AIS_InteractiveObject)& anIOWedge = awedge;
1236 myAISContext->SetSelected (anIOWedge, Standard_False);
1237 myAISContext->UpdateCurrentViewer();
1240 TopoDS_Shape theCommonSurface = BRepAlgoAPI_Common(theBox,theWedge);
1242 myAISContext->Erase(aboxshape, false);
1243 myAISContext->Erase(awedge, false);
1245 Handle(AIS_Shape) acommon = new AIS_Shape(theCommonSurface);
1246 myAISContext->SetColor(acommon,Quantity_NOC_GREEN,Standard_False);
1247 myAISContext->SetMaterial(acommon,Graphic3d_NOM_PLASTIC,Standard_False);
1248 myAISContext->Display (acommon, AIS_Shaded, 0,Standard_False);
1249 const Handle(AIS_InteractiveObject)& anIOCommon = acommon;
1250 myAISContext->SetSelected (anIOCommon, Standard_False);
1251 myAISContext->UpdateCurrentViewer();
1253 TCollection_AsciiString Message ("\
1255 gp_Ax2 axe(gp_Pnt(10,10,10),gp_Dir(1,2,1)); \n\
1257 TopoDS_Shape theBox = BRepPrimAPI_MakeBox(axe,60,80,100); \n\
1259 TopoDS_Shape theWedge = BRepPrimAPI_MakeWedge(60.,100.,80.,20.); \n\
1261 TopoDS_Shape theCommonSurface = BRepAlgoAPI_Common(theBox,theWedge); \n\
1264 PocessTextInDialog("Compute the common surface ", Message);
1268 void CModelingDoc::OnSection()
1271 AIS_ListOfInteractive aList;
1272 myAISContext->DisplayedObjects(aList);
1273 AIS_ListIteratorOfListOfInteractive aListIterator;
1274 for(aListIterator.Initialize(aList);aListIterator.More();aListIterator.Next()){
1275 myAISContext->Remove (aListIterator.Value(), Standard_False);
1278 TopoDS_Shape atorus = BRepPrimAPI_MakeTorus(120, 20).Shape();
1280 Handle(AIS_Shape) ashape=new AIS_Shape(atorus);
1281 myAISContext->SetColor(ashape,Quantity_NOC_RED,Standard_False);
1282 myAISContext->SetMaterial(ashape,Graphic3d_NOM_PLASTIC,Standard_False);
1283 myAISContext->SetDisplayMode(ashape,1,Standard_False);
1284 myAISContext->SetTransparency(ashape,0.1,Standard_False);
1285 myAISContext->Display(ashape,Standard_False);
1288 Standard_Real radius = 120;
1289 Standard_Integer i=-3;
1292 TopoDS_Shape asphere = BRepPrimAPI_MakeSphere(gp_Pnt(26 * 3 * i, 0, 0), radius).Shape();
1294 Handle (AIS_Shape) theShape=new AIS_Shape (asphere);
1295 myAISContext->SetTransparency(theShape,0.1,Standard_False);
1296 myAISContext->SetColor(theShape,Quantity_NOC_WHITE,Standard_False);
1297 myAISContext->SetDisplayMode(theShape,1,Standard_False);
1298 myAISContext->Display(theShape,Standard_False);
1301 Standard_Boolean PerformNow=Standard_False;
1303 BRepAlgoAPI_Section section(atorus,asphere,PerformNow);
1304 section.ComputePCurveOn1(Standard_True);
1305 section.Approximation(TopOpeBRepTool_APPROX);
1308 Handle(AIS_Shape) asection=new AIS_Shape(section.Shape());
1309 myAISContext->SetDisplayMode (asection, 0, Standard_False);
1310 myAISContext->SetColor (asection, Quantity_NOC_WHITE, Standard_False);
1311 myAISContext->Display (asection, Standard_False);
1313 myAISContext->Remove (theShape, Standard_False);
1316 myAISContext->UpdateCurrentViewer();
1317 TCollection_AsciiString Message ("\
1319 TopoDS_Shape atorus = BRepPrimAPI_MakeTorus(120,20); \n\
1320 gp_Vec V1(1,1,1); \n\
1321 Standard_Real radius = 120; \n\
1322 Standard_Integer i=-3; \n\
1323 for(i;i<=3;i++) { \n\
1324 TopoDS_Shape asphere = BRepPrimAPI_MakeSphere(gp_Pnt(78*i,0,0),radius); \n\
1325 Standard_Boolean PerformNow=Standard_False; \n\
1326 BRepAlgoAPI_Section section(atorus,asphere,PerformNow); \n\
1327 section.ComputePCurveOn1(Standard_True); \n\
1328 section.Approximation(TopOpeBRepTool_APPROX); \n\
1329 section.Build(); \n\
1332 PocessTextInDialog("Compute the sections ", Message);
1336 void CModelingDoc::OnPsection()
1338 AIS_ListOfInteractive aList;
1339 myAISContext->DisplayedObjects(aList);
1340 AIS_ListIteratorOfListOfInteractive aListIterator;
1341 for(aListIterator.Initialize(aList);aListIterator.More();aListIterator.Next()){
1342 myAISContext->Remove (aListIterator.Value(), Standard_False);
1345 TopoDS_Shape theTorus = BRepPrimAPI_MakeTorus(35, 8).Shape();
1346 Handle(AIS_Shape) atorus = new AIS_Shape(theTorus);
1347 myAISContext->SetColor(atorus,Quantity_NOC_YELLOW,Standard_False);
1348 myAISContext->SetMaterial(atorus,Graphic3d_NOM_PLASTIC,Standard_False);
1349 myAISContext->SetTransparency(atorus,0.1,Standard_False);
1350 myAISContext->Display(atorus,Standard_False);
1351 const Handle(AIS_InteractiveObject)& anIOTorus = atorus;
1352 myAISContext->SetSelected (anIOTorus, Standard_False);
1356 gp_Pln aplane(1,0.25,3,4);
1357 Handle (Geom_Plane) thePlane = new Geom_Plane(aplane);
1358 Handle (AIS_Plane) ais1 = new AIS_Plane(thePlane);
1359 myAISContext->Display(ais1,Standard_False);
1360 const Handle(AIS_InteractiveObject)& anIO1 = ais1;
1361 myAISContext->SetSelected (anIO1, Standard_False);
1365 BRepAlgoAPI_Section section(theTorus,thePlane,Standard_False);
1366 section.ComputePCurveOn1(Standard_True);
1367 section.Approximation(TopOpeBRepTool_APPROX);
1370 Handle(AIS_Shape) asection=new AIS_Shape(section.Shape());
1371 myAISContext->SetDisplayMode(asection ,0,Standard_False);
1372 myAISContext->SetColor(asection,Quantity_NOC_WHITE,Standard_False);
1373 myAISContext->Display(asection,Standard_False);
1376 TCollection_AsciiString Message ("\
1378 TopoDS_Shape theTorus = BRepPrimAPI_MakeTorus(60.,20.); \n\
1380 gp_Pln P(1,2,1,-15); \n\
1382 TopoDS_Shape Psection = BRepAlgoAPI_Section(theTorus,P); \n\
1385 PocessTextInDialog("Compute the plane section ", Message);
1389 void CModelingDoc::OnBlend()
1391 AIS_ListOfInteractive aList;
1392 myAISContext->DisplayedObjects(aList);
1393 AIS_ListIteratorOfListOfInteractive aListIterator;
1394 for(aListIterator.Initialize(aList);aListIterator.More();aListIterator.Next()){
1395 myAISContext->Remove (aListIterator.Value(), Standard_False);
1398 TopoDS_Shape Box = BRepPrimAPI_MakeBox(gp_Pnt(-400,0,0),200,230,180).Shape();
1399 Handle(AIS_Shape) ais1 = new AIS_Shape(Box);
1400 myAISContext->SetColor(ais1,Quantity_NOC_YELLOW,Standard_False);
1401 myAISContext->SetMaterial(ais1,Graphic3d_NOM_PLASTIC,Standard_False);
1402 myAISContext->Display(ais1,Standard_False);
1403 const Handle(AIS_InteractiveObject)& anIO1 = ais1;
1404 myAISContext->SetSelected (anIO1, Standard_False);
1408 BRepFilletAPI_MakeFillet fillet(Box);
1410 for (TopExp_Explorer ex(Box,TopAbs_EDGE); ex.More(); ex.Next()) {
1411 TopoDS_Edge Edge =TopoDS::Edge(ex.Current());
1412 fillet.Add(20,Edge);
1415 myAISContext->Remove(ais1,Standard_False);
1417 TopoDS_Shape blendedBox = fillet.Shape();
1418 Handle(AIS_Shape) aBlendbox = new AIS_Shape(blendedBox);
1419 myAISContext->SetColor(aBlendbox,Quantity_NOC_YELLOW,Standard_False);
1420 myAISContext->SetMaterial(aBlendbox,Graphic3d_NOM_PLASTIC,Standard_False);
1421 myAISContext->Display(aBlendbox,Standard_False);
1422 const Handle(AIS_InteractiveObject)& anIOBlendBox = aBlendbox;
1423 myAISContext->SetSelected (anIOBlendBox, Standard_False);
1428 gp_Pnt P1(250,150,75);
1429 TopoDS_Shape S1 = BRepPrimAPI_MakeBox(300, 200, 200).Shape();
1430 TopoDS_Shape S2 = BRepPrimAPI_MakeBox(P1, 120, 180, 70).Shape();
1432 TopoDS_Shape fusedShape = BRepAlgoAPI_Fuse(S1,S2);
1433 Handle(AIS_Shape) ais2 = new AIS_Shape(fusedShape);
1434 myAISContext->SetColor(ais2,Quantity_NOC_RED,Standard_False);
1435 myAISContext->SetMaterial(ais2,Graphic3d_NOM_PLASTIC,Standard_False);
1436 myAISContext->Display(ais2,Standard_False);
1437 const Handle(AIS_InteractiveObject)& anIO2 = ais2;
1438 myAISContext->SetSelected (anIO2, Standard_False);
1441 BRepFilletAPI_MakeFillet fill(fusedShape);
1443 for (TopExp_Explorer ex1(fusedShape,TopAbs_EDGE); ex1.More(); ex1.Next()) {
1444 TopoDS_Edge E =TopoDS::Edge(ex1.Current());
1448 for (Standard_Integer i = 1;i<=fill.NbContours();i++) {
1449 Standard_Real longueur(fill.Length(i));
1450 Standard_Real Rad(0.15*longueur);
1451 fill.SetRadius(Rad,i, 1);
1454 TopoDS_Shape blendedFusedSolids = fill.Shape();
1456 Handle(AIS_Shape) aBlend = new AIS_Shape(blendedFusedSolids);
1457 myAISContext->SetColor(aBlend,Quantity_NOC_RED,Standard_False);
1458 myAISContext->SetMaterial(aBlend,Graphic3d_NOM_PLASTIC,Standard_False);
1459 myAISContext->Display(aBlend,Standard_False);
1461 myAISContext->Remove(ais2,Standard_False);
1465 TCollection_AsciiString Message ("\
1468 TopoDS_Shape Box = BRepPrimAPI_MakeBox(gp_Pnt(-400,0,0),200,230,180);\n\
1470 BRepPrimAPI_MakeFillet fillet(Box);\n\
1472 for (TopExp_Explorer ex(Box,TopAbs_EDGE); ex.More(); ex.Next()) {\n\
1473 TopoDS_Edge Edge =TopoDS::Edge(ex.Current());\n\
1474 fillet.Add(20,Edge);\n\
1476 TopoDS_Shape blendedBox = fillet.Shape();\n\
1478 ////////////////////////////////////////////////////////////////////////\n\
1482 //Warning : On the acute angles of the boxes a fillet is created. \n\
1483 On the angles of fusion a blend is created. \n\
1485 gp_Pnt P1(150,150,75);\n\
1486 TopoDS_Shape S1 = BRepPrimAPI_MakeBox(300,200,200);\n\
1487 TopoDS_Shape S2 = BRepPrimAPI_MakeBox(P1,100,200,70);\n\
1489 TopoDS_Shape fusedShape = BRepAlgoAPI_Fuse(S1,S2);\n\
1490 BRepPrimAPI_MakeFillet fill(fusedShape);\n\
1492 for (TopExp_Explorer ex1(fusedShape,TopAbs_EDGE); ex1.More(); ex1.Next()) {\n\
1493 TopoDS_Edge E =TopoDS::Edge(ex1.Current());\n\
1497 for (Standard_Integer i = 1;i<=fill.NbContours();i++) {\n\
1498 Standard_Real longueur(fill.Length(i));\n\
1499 Standard_Real Rad(0.2*longueur);\n\
1500 fill.SetRadius(Rad,i);\n\
1503 TopoDS_Shape blendedFusedSolids = fill.Shape(); \n");
1505 PocessTextInDialog("Compute the blend on the edges ", Message);
1508 void CModelingDoc::OnEvolvedblend()
1511 AIS_ListOfInteractive aList;
1512 myAISContext->DisplayedObjects(aList);
1513 AIS_ListIteratorOfListOfInteractive aListIterator;
1514 for(aListIterator.Initialize(aList);aListIterator.More();aListIterator.Next()){
1515 myAISContext->Remove (aListIterator.Value(), Standard_False);
1518 TopoDS_Shape theBox = BRepPrimAPI_MakeBox(200, 200, 200).Shape();
1519 Handle(AIS_Shape) ais1 = new AIS_Shape(theBox);
1520 myAISContext->SetColor(ais1,Quantity_NOC_BROWN,Standard_False);
1521 myAISContext->SetMaterial(ais1,Graphic3d_NOM_PLASTIC,Standard_False);
1522 myAISContext->Display(ais1,Standard_False);
1523 const Handle(AIS_InteractiveObject)& anIO1 = ais1;
1524 myAISContext->SetSelected (anIO1, Standard_False);
1528 BRepFilletAPI_MakeFillet Rake(theBox);
1530 TopExp_Explorer ex(theBox,TopAbs_EDGE);
1535 Rake.Add(8,50,TopoDS::Edge(ex.Current()));
1537 if (Rake.IsDone() ){
1538 TopoDS_Shape evolvedBox = Rake.Shape();
1539 ais1->Set(evolvedBox);
1540 myAISContext->Redisplay(ais1,Standard_False);
1541 myAISContext->SetSelected(anIO1, Standard_False);
1547 TopoDS_Shape theCylinder = BRepPrimAPI_MakeCylinder(gp_Ax2(gp_Pnt(-300, 0, 0), gp::DZ()), 100, 200).Shape();
1548 Handle(AIS_Shape) ais3 = new AIS_Shape(theCylinder);
1549 myAISContext->SetColor(ais3,Quantity_NOC_GREEN,Standard_False);
1550 myAISContext->SetMaterial(ais3,Graphic3d_NOM_PLASTIC,Standard_False);
1551 myAISContext->Display(ais3,Standard_False);
1552 const Handle(AIS_InteractiveObject)& anIO3 = ais3;
1553 myAISContext->SetSelected (anIO3, Standard_False);
1557 BRepFilletAPI_MakeFillet fillet(theCylinder);
1559 TColgp_Array1OfPnt2d TabPoint2(1,20);
1561 for (Standard_Integer i=0; i<=19; i++) {
1562 gp_Pnt2d Point2d(i*2*M_PI/19,60*cos(i*M_PI/19-M_PI/2)+10);
1563 TabPoint2.SetValue(i+1,Point2d);
1566 TopExp_Explorer exp2(theCylinder,TopAbs_EDGE);
1567 fillet.Add(TabPoint2,TopoDS::Edge(exp2.Current()));
1569 if (fillet.IsDone() ){
1570 TopoDS_Shape LawEvolvedCylinder = fillet.Shape();
1571 ais3->Set(LawEvolvedCylinder);
1572 myAISContext->Redisplay(ais3,Standard_False);
1573 myAISContext->SetSelected(anIO3,Standard_False);
1579 TopoDS_Shape theBox2 = BRepPrimAPI_MakeBox(P, 200, 200, 200).Shape();
1580 Handle(AIS_Shape) ais2 = new AIS_Shape(theBox2);
1581 myAISContext->SetColor(ais2,Quantity_NOC_RED,Standard_False);
1582 myAISContext->SetMaterial(ais2,Graphic3d_NOM_PLASTIC,Standard_False);
1583 myAISContext->Display(ais2,Standard_False);
1584 const Handle(AIS_InteractiveObject)& anIO2 = ais2;
1585 myAISContext->SetSelected (anIO2, Standard_False);
1590 BRepFilletAPI_MakeFillet afillet(theBox2);
1592 TColgp_Array1OfPnt2d TabPoint(1,6);
1595 gp_Pnt2d P2(0.2,16.);
1596 gp_Pnt2d P3(0.4,25.);
1597 gp_Pnt2d P4(0.6,55.);
1598 gp_Pnt2d P5(0.8,28.);
1599 gp_Pnt2d P6(1.,20.);
1600 TabPoint.SetValue(1,P1);
1601 TabPoint.SetValue(2,P2);
1602 TabPoint.SetValue(3,P3);
1603 TabPoint.SetValue(4,P4);
1604 TabPoint.SetValue(5,P5);
1605 TabPoint.SetValue(6,P6);
1607 TopExp_Explorer exp(theBox2,TopAbs_EDGE);
1613 afillet.Add(TabPoint, TopoDS::Edge(exp.Current()));
1616 if (afillet.IsDone() ){
1617 TopoDS_Shape LawevolvedBox = afillet.Shape();
1618 ais2->Set(LawevolvedBox);
1619 myAISContext->Redisplay(ais2,Standard_False);
1620 myAISContext->SetSelected(anIO2,Standard_False);
1625 TCollection_AsciiString Message ("\
1629 TopoDS_Shape theBox = BRepPrimAPI_MakeBox(200,200,200); \n\
1631 BRepPrimAPI_MakeFillet Rake(theBox); \n\
1632 ChFi3d_FilletShape FSh = ChFi3d_Rational; \n\
1633 Rake.SetFilletShape(FSh); \n\
1635 TopExp_Explorer ex(theBox,TopAbs_EDGE); \n\
1636 ex.Next(); //in order to recover the front edge \n\
1640 Rake.Add(8,50,TopoDS::Edge(ex.Current())); \n\
1643 if (Rake.IsDone() ) \n\
1644 TopoDS_Shape theBrownBox = Rake.Shape(); \n\
1646 ////////////////////////////////////////////////////////// \n\
1648 //THE GREEN CYLINDER \n\
1650 TopoDS_Shape theCylinder = BRepPrimAPI_MakeCylinder(gp_Ax2(gp_Pnt(-300,0,0),gp_Dir(0,0,1)),100,200); \n\
1652 BRepPrimAPI_MakeFillet fillet(theCylinder); \n\
1654 TColgp_Array1OfPnt2d TabPoint2(1,20); \n\
1656 for (Standard_Integer i=0; i<=19; i++) { \n\
1657 gp_Pnt2d Point2d(i*2*PI/19,60*cos(i*PI/19-PI/2)+10); \n\
1658 TabPoint2.SetValue(i+1,Point2d); \n\
1661 TopExp_Explorer exp2(theCylinder,TopAbs_EDGE); \n\
1662 fillet.Add(TabPoint2,TopoDS::Edge(exp2.Current())); \n\
1665 if (fillet.IsDone() ) \n\
1666 TopoDS_Shape LawEvolvedCylinder = fillet.Shape(); \n\
1668 //////////////////////////////////////////////////////////// \n\
1672 gp_Pnt P(350,0,0); \n\
1673 TopoDS_Shape theBox2 = BRepPrimAPI_MakeBox(P,200,200,200); \n\
1675 BRepPrimAPI_MakeFillet fill(theBox2); \n\
1677 TColgp_Array1OfPnt2d TabPoint(1,6); \n\
1678 gp_Pnt2d P1(0,8); \n\
1679 gp_Pnt2d P2(0.2,16); \n\
1680 gp_Pnt2d P3(0.4,25); \n\
1681 gp_Pnt2d P4(0.6,55); \n\
1682 gp_Pnt2d P5(0.8,28); \n\
1683 gp_Pnt2d P6(1,20); \n\
1684 TabPoint.SetValue(1,P1); \n\
1685 TabPoint.SetValue(2,P2); \n\
1686 TabPoint.SetValue(3,P3); \n\
1687 TabPoint.SetValue(4,P4); \n\
1688 TabPoint.SetValue(5,P5); \n\
1689 TabPoint.SetValue(6,P6); \n\
1691 TopExp_Explorer exp(theBox2,TopAbs_EDGE); \n\
1692 exp.Next(); //in order to trcover the front edge \n\
1696 fill.Add(TabPoint,TopoDS::Edge(exp.Current())); \n\
1699 if (fillet.IsDone() ) \n\
1700 TopoDS_Shape theRedBox = fill.Shape(); \n\
1703 PocessTextInDialog("Compute evolutiv blend on an edge ", Message);
1707 void CModelingDoc::OnChamf()
1709 AIS_ListOfInteractive aList;
1710 myAISContext->DisplayedObjects(aList);
1711 AIS_ListIteratorOfListOfInteractive aListIterator;
1712 for(aListIterator.Initialize(aList);aListIterator.More();aListIterator.Next()){
1713 myAISContext->Remove (aListIterator.Value(), Standard_False);
1716 TopoDS_Shape theBox = BRepPrimAPI_MakeBox(60,200,70).Shape();
1717 Handle(AIS_Shape) ais1 = new AIS_Shape(theBox);
1718 myAISContext->SetColor(ais1,Quantity_NOC_YELLOW,Standard_False);
1719 myAISContext->SetMaterial(ais1,Graphic3d_NOM_PLASTIC,Standard_False);
1720 myAISContext->Display(ais1,Standard_False);
1721 const Handle(AIS_InteractiveObject)& anIO1 = ais1;
1722 myAISContext->SetSelected (anIO1, Standard_False);
1726 BRepFilletAPI_MakeChamfer MC(theBox);
1727 // add all the edges to chamfer
1728 TopTools_IndexedDataMapOfShapeListOfShape M;
1729 TopExp::MapShapesAndAncestors(theBox,TopAbs_EDGE,TopAbs_FACE,M);
1730 for (Standard_Integer i = 1;i<=M.Extent();i++) {
1731 TopoDS_Edge E = TopoDS::Edge(M.FindKey(i));
1732 TopoDS_Face F = TopoDS::Face(M.FindFromIndex(i).First());
1736 TopoDS_Shape ChanfrenedBox = MC.Shape();
1737 Handle(AIS_Shape) aBlendedBox = new AIS_Shape(ChanfrenedBox);
1738 myAISContext->SetColor(aBlendedBox,Quantity_NOC_YELLOW,Standard_False);
1739 myAISContext->SetMaterial(aBlendedBox,Graphic3d_NOM_PLASTIC,Standard_False);
1740 myAISContext->Display(aBlendedBox,Standard_False);
1741 const Handle(AIS_InteractiveObject)& anIOBlendedBox = aBlendedBox;
1742 myAISContext->SetSelected (anIOBlendedBox, Standard_False);
1746 myAISContext->Erase(ais1,Standard_True);
1748 TCollection_AsciiString Message ("\
1750 TopoDS_Shape theBox = BRepPrimAPI_MakeBox(130,200,170); \n\
1751 BRepFilletAPI_MakeChamfer MC(theBox); \n\
1752 TopTools_IndexedDataMapOfShapeListOfShape M; \n\
1753 TopExp::MapShapesAndAncestors(theBox,TopAbs_EDGE,TopAbs_FACE,M); \n\
1754 for (Standar1d_Integer i;i<M.Extent();i++) { \n\
1755 TopoDS_Edge E = TopoDS::Edge(M.FindKey(i)); \n\
1756 TopoDS_Face F = TopoDS::Face(M.FindFromIndex(i).First()); \n\
1757 MC.Add(15,15,E,F); \n\
1759 TopoDS_Shape ChanfrenedBox = MC.Shape(); \n");
1761 PocessTextInDialog("Compute the chamfers on all the edges ", Message);
1764 /* =================================================================================
1765 ==================== L O C A L O P E R A T I O N S ========================
1766 ================================================================================= */
1768 void CModelingDoc::OnPrismLocal()
1770 AIS_ListOfInteractive aList;
1771 myAISContext->DisplayedObjects(aList);
1772 AIS_ListIteratorOfListOfInteractive aListIterator;
1773 for(aListIterator.Initialize(aList);aListIterator.More();aListIterator.Next()){
1774 myAISContext->Remove (aListIterator.Value(), Standard_False);
1776 TopoDS_Shape S = BRepPrimAPI_MakeBox(400., 250., 300.).Shape();
1777 Handle(AIS_Shape) ais1 = new AIS_Shape(S);
1779 myAISContext->SetColor(ais1,Quantity_NOC_GREEN,Standard_False);
1780 myAISContext->SetMaterial(ais1,Graphic3d_NOM_PLASTIC,Standard_False);
1781 myAISContext->Display(ais1,Standard_False);
1782 const Handle(AIS_InteractiveObject)& anIO1 = ais1;
1783 myAISContext->SetSelected (anIO1, Standard_False);
1788 Ex.Init(S,TopAbs_FACE);
1790 TopoDS_Face F = TopoDS::Face(Ex.Current());
1791 Handle(Geom_Surface) surf = BRep_Tool::Surface(F);
1792 Handle(Geom_Plane) Pl = Handle(Geom_Plane)::DownCast(surf);
1793 gp_Dir D = Pl->Pln().Axis().Direction();
1794 // new in 2.0 ..use the trigonometric orientation to make the extrusion.
1797 Handle(Geom2d_Curve) aline;
1798 BRepBuilderAPI_MakeWire MW;
1799 p1 = gp_Pnt2d(200.,-100.);
1800 p2 = gp_Pnt2d(100.,-100.);
1801 aline = GCE2d_MakeLine(p1,p2).Value();
1802 MW.Add(BRepBuilderAPI_MakeEdge(aline,surf,0.,p1.Distance(p2)));
1804 p2 = gp_Pnt2d(100.,-200.);
1805 aline = GCE2d_MakeLine(p1,p2).Value();
1806 MW.Add(BRepBuilderAPI_MakeEdge(aline,surf,0.,p1.Distance(p2)));
1808 p2 = gp_Pnt2d(200.,-200.);
1809 aline = GCE2d_MakeLine(p1,p2).Value();
1810 MW.Add(BRepBuilderAPI_MakeEdge(aline,surf,0.,p1.Distance(p2)));
1812 p2 = gp_Pnt2d(200.,-100.);
1813 aline = GCE2d_MakeLine(p1,p2).Value();
1814 MW.Add(BRepBuilderAPI_MakeEdge(aline,surf,0.,p1.Distance(p2)));
1815 BRepBuilderAPI_MakeFace MKF;
1816 MKF.Init(surf,Standard_False, Precision::Confusion());
1818 TopoDS_Shape FP = MKF.Face();
1819 BRepLib::BuildCurves3d(FP);
1820 BRepFeat_MakePrism MKP(S,FP,F,D,0,Standard_True);
1822 TopoDS_Shape res1 = MKP.Shape();
1825 myAISContext->Redisplay(ais1,Standard_False);
1826 myAISContext->SetSelected(anIO1,Standard_False);
1831 TopoDS_Face F2 = TopoDS::Face(Ex.Current());
1832 surf = BRep_Tool::Surface(F2);
1833 Pl = Handle(Geom_Plane)::DownCast(surf);
1834 D = Pl->Pln().Axis().Direction();
1836 BRepBuilderAPI_MakeWire MW2;
1837 p1 = gp_Pnt2d(100.,100.);
1838 p2 = gp_Pnt2d(200.,100.);
1839 aline = GCE2d_MakeLine(p1,p2).Value();
1840 MW2.Add(BRepBuilderAPI_MakeEdge(aline,surf,0.,p1.Distance(p2)));
1842 p2 = gp_Pnt2d(150.,200.);
1843 aline = GCE2d_MakeLine(p1,p2).Value();
1844 MW2.Add(BRepBuilderAPI_MakeEdge(aline,surf,0.,p1.Distance(p2)));
1846 p2 = gp_Pnt2d(100.,100.);
1847 aline = GCE2d_MakeLine(p1,p2).Value();
1848 MW2.Add(BRepBuilderAPI_MakeEdge(aline,surf,0.,p1.Distance(p2)));
1849 BRepBuilderAPI_MakeFace MKF2;
1850 MKF2.Init(surf,Standard_False, Precision::Confusion());
1851 MKF2.Add(MW2.Wire());
1853 BRepLib::BuildCurves3d(FP);
1854 BRepFeat_MakePrism MKP2(res1,FP,F2,D,1,Standard_True);
1856 TopoDS_Shape res2 = MKP2.Shape();
1859 myAISContext->Redisplay (ais1, Standard_False);
1860 myAISContext->SetSelected (anIO1, Standard_False);
1863 TCollection_AsciiString Message ("\
1865 --- Extrusion ---\n\
1867 TopoDS_Shape S = BRepPrimAPI_MakeBox(400.,250.,300.);\n\
1868 TopExp_Explorer Ex;\n\
1869 Ex.Init(S,TopAbs_FACE);\n\
1871 TopoDS_Face F = TopoDS::Face(Ex.Current());\n\
1872 Handle(Geom_Surface) surf = BRep_Tool::Surface(F);\n\
1873 Handle(Geom_Plane) Pl = Handle(Geom_Plane)::DownCast(surf);\n\
1874 gp_Dir D = Pl->Pln().Axis().Direction();\n\
1877 Handle(Geom2d_Curve) aline;\n\
1878 BRepBuilderAPI_MakeWire MW;\n\
1879 p1 = gp_Pnt2d(200.,-100.);\n\
1880 p2 = gp_Pnt2d(100.,-100.);\n\
1881 aline = GCE2d_MakeLine(p1,p2).Value();\n\
1882 MW.Add(BRepBuilderAPI_MakeEdge(aline,surf,0.,p1.Distance(p2)));\n\
1884 p2 = gp_Pnt2d(100.,-200.);\n\
1885 aline = GCE2d_MakeLine(p1,p2).Value();\n\
1886 MW.Add(BRepBuilderAPI_MakeEdge(aline,surf,0.,p1.Distance(p2)));\n\
1888 p2 = gp_Pnt2d(200.,-200.);\n\
1889 aline = GCE2d_MakeLine(p1,p2).Value();\n\
1890 MW.Add(BRepBuilderAPI_MakeEdge(aline,surf,0.,p1.Distance(p2)));\n\
1892 p2 = gp_Pnt2d(200.,-100.);\n\
1893 aline = GCE2d_MakeLine(p1,p2).Value();\n\
1894 MW.Add(BRepBuilderAPI_MakeEdge(aline,surf,0.,p1.Distance(p2)));\n\
1895 BRepBuilderAPI_MakeFace MKF;\n\
1896 MKF.Init(surf,Standard_False);\n\
1897 MKF.Add(MW.Wire());\n\
1898 TopoDS_Shape FP = MKF.Face();\n\
1899 BRepLib::BuildCurves3d(FP);\n\
1900 BRepFeat_MakePrism MKP(S,FP,F,D,0,Standard_True);\n\
1901 MKP.Perform(200);\n\
1902 TopoDS_Shape res1 = MKP.Shape();\n\
1905 --- Protrusion --- \n\
1908 TopoDS_Face F2 = TopoDS::Face(Ex.Current());\n\
1909 surf = BRep_Tool::Surface(F2);\n\
1910 Pl = Handle(Geom_Plane)::DownCast(surf);\n\
1911 D = Pl->Pln().Axis().Direction();\n\
1913 BRepBuilderAPI_MakeWire MW2;\n\
1914 p1 = gp_Pnt2d(100.,100.);\n\
1915 p2 = gp_Pnt2d(200.,100.);\n\
1916 aline = GCE2d_MakeLine(p1,p2).Value();\n\
1917 MW2.Add(BRepBuilderAPI_MakeEdge(aline,surf,0.,p1.Distance(p2)));\n\
1919 p2 = gp_Pnt2d(150.,200.);\n\
1920 aline = GCE2d_MakeLine(p1,p2).Value();\n\
1921 MW2.Add(BRepBuilderAPI_MakeEdge(aline,surf,0.,p1.Distance(p2)));\n\
1923 p2 = gp_Pnt2d(100.,100.);\n\
1924 aline = GCE2d_MakeLine(p1,p2).Value();\n\
1925 MW2.Add(BRepBuilderAPI_MakeEdge(aline,surf,0.,p1.Distance(p2)));\n\
1926 BRepBuilderAPI_MakeFace MKF2;\n\
1927 MKF2.Init(surf,Standard_False);\n\
1928 MKF2.Add(MW2.Wire());\n\
1929 FP = MKF2.Face();\n\
1930 BRepLib::BuildCurves3d(FP);\n\
1931 BRepFeat_MakePrism MKP2(res1,FP,F2,D,1,Standard_True);\n\
1932 MKP2.Perform(100.);\n\
1933 TopoDS_Shape res2 = MKP2.Shape();\n\
1935 PocessTextInDialog("Make an extrusion or a protrusion", Message);
1939 // BRepFeat_MakeDPrism
1941 void CModelingDoc::OnDprismLocal()
1943 AIS_ListOfInteractive aList;
1944 myAISContext->DisplayedObjects(aList);
1945 AIS_ListIteratorOfListOfInteractive aListIterator;
1946 for(aListIterator.Initialize(aList);aListIterator.More();aListIterator.Next()){
1947 myAISContext->Remove (aListIterator.Value(), Standard_False);
1950 TopoDS_Shape S = BRepPrimAPI_MakeBox(400., 250., 300.).Shape();
1951 Handle(AIS_Shape) ais1 = new AIS_Shape(S);
1953 myAISContext->SetColor(ais1,Quantity_NOC_RED,Standard_False);
1954 myAISContext->SetMaterial(ais1,Graphic3d_NOM_PLASTIC,Standard_False);
1957 Ex.Init(S,TopAbs_FACE);
1963 TopoDS_Face F = TopoDS::Face(Ex.Current());
1964 Handle(Geom_Surface) surf = BRep_Tool::Surface(F);
1965 gp_Circ2d c(gp_Ax2d(gp_Pnt2d(200.,130.),gp_Dir2d(1.,0.)),50.);
1966 BRepBuilderAPI_MakeWire MW;
1967 Handle(Geom2d_Curve) aline = new Geom2d_Circle(c);
1968 MW.Add(BRepBuilderAPI_MakeEdge(aline,surf,0.,M_PI));
1969 MW.Add(BRepBuilderAPI_MakeEdge(aline,surf,M_PI,2.*M_PI));
1970 BRepBuilderAPI_MakeFace MKF;
1971 MKF.Init(surf,Standard_False, Precision::Confusion());
1973 TopoDS_Face FP = MKF.Face();
1974 BRepLib::BuildCurves3d(FP);
1975 BRepFeat_MakeDPrism MKDP(S,FP,F,10*M_PI/180,1,Standard_True);
1977 TopoDS_Shape res1 = MKDP.Shape();
1979 myAISContext->Display(ais1,Standard_False);
1980 const Handle(AIS_InteractiveObject)& anIO1 = ais1;
1981 myAISContext->SetSelected (anIO1, Standard_False);
1987 myAISContext->Redisplay(ais1,Standard_False);
1988 myAISContext->SetSelected(anIO1,Standard_False);
1992 TCollection_AsciiString Message ("\
1994 --- Protrusion with draft angle --- \n\
1996 TopoDS_Shape S = BRepPrimAPI_MakeBox(400.,250.,300.);\n\
1997 TopExp_Explorer Ex;\n\
1998 Ex.Init(S,TopAbs_FACE);\n\
2004 TopoDS_Face F = TopoDS::Face(Ex.Current());\n\
2005 Handle(Geom_Surface) surf = BRep_Tool::Surface(F);\n\
2006 gp_Circ2d c(gp_Ax2d(gp_Pnt2d(200.,130.),gp_Dir2d(1.,0.)),50.);\n\
2007 BRepBuilderAPI_MakeWire MW;\n\
2008 Handle(Geom2d_Curve) aline = new Geom2d_Circle(c);\n\
2009 MW.Add(BRepBuilderAPI_MakeEdge(aline,surf,0.,PI));\n\
2010 MW.Add(BRepBuilderAPI_MakeEdge(aline,surf,PI,2.*PI));\n\
2011 BRepBuilderAPI_MakeFace MKF;\n\
2012 MKF.Init(surf,Standard_False);\n\
2013 MKF.Add(MW.Wire());\n\
2014 TopoDS_Face FP = MKF.Face();\n\
2015 BRepLib::BuildCurves3d(FP);\n\
2016 BRepFeat_MakeDPrism MKDP(S,FP,F,10*PI180,1,Standard_True);\n\
2017 MKDP.Perform(200);\n\
2018 TopoDS_Shape res1 = MKDP.Shape();\n\
2020 PocessTextInDialog("Make an extrusion or a protrusion with a draft angle", Message);
2023 void CModelingDoc::OnRevolLocal()
2025 AIS_ListOfInteractive aList;
2026 myAISContext->DisplayedObjects(aList);
2027 AIS_ListIteratorOfListOfInteractive aListIterator;
2028 for(aListIterator.Initialize(aList);aListIterator.More();aListIterator.Next()){
2029 myAISContext->Remove (aListIterator.Value(), Standard_False);
2031 TopoDS_Shape S = BRepPrimAPI_MakeBox(400., 250., 300.).Shape();
2033 Handle(AIS_Shape) ais1 = new AIS_Shape(S);
2035 myAISContext->SetColor(ais1,Quantity_NOC_CORAL,Standard_False);
2036 myAISContext->SetMaterial(ais1,Graphic3d_NOM_PLASTIC,Standard_False);
2037 myAISContext->Display(ais1,Standard_False);
2038 const Handle(AIS_InteractiveObject)& anIO1 = ais1;
2039 myAISContext->SetSelected (anIO1, Standard_False);
2044 Ex.Init(S,TopAbs_FACE);
2047 TopoDS_Face F1 = TopoDS::Face(Ex.Current());
2048 Handle(Geom_Surface) surf = BRep_Tool::Surface(F1);
2049 Handle (Geom_Plane) Pl = Handle(Geom_Plane)::DownCast(surf);
2050 gp_Ax1 D = gp::OX();
2051 BRepBuilderAPI_MakeWire MW1;
2053 p1 = gp_Pnt2d(100.,100.);
2054 p2 = gp_Pnt2d(200.,100.);
2055 Handle(Geom2d_Line) aline = GCE2d_MakeLine(p1,p2).Value();
2056 MW1.Add(BRepBuilderAPI_MakeEdge(aline,surf,0.,p1.Distance(p2)));
2058 p2 = gp_Pnt2d(150.,200.);
2059 aline = GCE2d_MakeLine(p1,p2).Value();
2060 MW1.Add(BRepBuilderAPI_MakeEdge(aline,surf,0.,p1.Distance(p2)));
2062 p2 = gp_Pnt2d(100.,100.);
2063 aline = GCE2d_MakeLine(p1,p2).Value();
2064 MW1.Add(BRepBuilderAPI_MakeEdge(aline,surf,0.,p1.Distance(p2)));
2065 BRepBuilderAPI_MakeFace MKF1;
2066 MKF1.Init(surf,Standard_False, Precision::Confusion());
2067 MKF1.Add(MW1.Wire());
2068 TopoDS_Face FP = MKF1.Face();
2069 BRepLib::BuildCurves3d(FP);
2070 BRepFeat_MakeRevol MKrev(S,FP,F1,D,1,Standard_True);
2073 TopoDS_Face F2 = TopoDS::Face(Ex.Current());
2075 TopoDS_Shape res1 = MKrev.Shape();
2078 myAISContext->Remove (ais1, Standard_False);
2079 Handle(AIS_Shape) ais2 = new AIS_Shape(res1);
2080 myAISContext->Display(ais2,Standard_False);
2081 const Handle(AIS_InteractiveObject)& anIO2 = ais2;
2082 myAISContext->SetSelected (anIO2, Standard_False);
2085 TCollection_AsciiString Message ("\
2087 TopoDS_Shape S = BRepPrimAPI_MakeBox(400.,250.,300.);\n\
2088 TopExp_Explorer Ex;\n\
2089 Ex.Init(S,TopAbs_FACE);\n\
2092 TopoDS_Face F1 = TopoDS::Face(Ex.Current());\n\
2093 Handle(Geom_Surface) surf = BRep_Tool::Surface(F1);\n\
2094 Handle (Geom_Plane) Pl = Handle(Geom_Plane)::DownCast(surf);\n\
2095 gp_Ax1 D = gp::OX();\n\
2096 BRepBuilderAPI_MakeWire MW1;\n\
2098 p1 = gp_Pnt2d(100.,100.);\n\
2099 p2 = gp_Pnt2d(200.,100.);\n\
2100 Handle(Geom2d_Line) aline = GCE2d_MakeLine(p1,p2).Value();\n\
2101 MW1.Add(BRepBuilderAPI_MakeEdge(aline,surf,0.,p1.Distance(p2)));\n\
2103 p2 = gp_Pnt2d(150.,200.);\n\
2104 aline = GCE2d_MakeLine(p1,p2).Value();\n\
2105 MW1.Add(BRepBuilderAPI_MakeEdge(aline,surf,0.,p1.Distance(p2)));\n\
2107 p2 = gp_Pnt2d(100.,100.);\n\
2108 aline = GCE2d_MakeLine(p1,p2).Value();\n\
2109 MW1.Add(BRepBuilderAPI_MakeEdge(aline,surf,0.,p1.Distance(p2)));\n\
2110 BRepBuilderAPI_MakeFace MKF1;\n\
2111 MKF1.Init(surf,Standard_False);\n\
2112 MKF1.Add(MW1.Wire());\n\
2113 TopoDS_Face FP = MKF1.Face();\n\
2114 BRepLib::BuildCurves3d(FP);\n\
2115 BRepFeat_MakeRevol MKrev(S,FP,F1,D,1,Standard_True);\n\
2117 TopoDS_Face F2 = TopoDS::Face(Ex.Current());\n\
2118 MKrev.Perform(F2);\n\
2119 TopoDS_Shape res1 = MKrev.Shape();\n\
2121 PocessTextInDialog("Make a local revolution", Message);
2124 void CModelingDoc::OnGlueLocal()
2126 AIS_ListOfInteractive aList;
2127 myAISContext->DisplayedObjects(aList);
2128 AIS_ListIteratorOfListOfInteractive aListIterator;
2129 for(aListIterator.Initialize(aList);aListIterator.More();aListIterator.Next()){
2130 myAISContext->Remove (aListIterator.Value(), Standard_False);
2132 TopoDS_Shape S1 = BRepPrimAPI_MakeBox(gp_Pnt(-500., -500., 0.), gp_Pnt(-100., -250., 300.)).Shape();
2134 Handle(AIS_Shape) ais1 = new AIS_Shape(S1);
2135 myAISContext->SetColor(ais1,Quantity_NOC_ORANGE,Standard_False);
2136 myAISContext->SetMaterial(ais1,Graphic3d_NOM_PLASTIC,Standard_False);
2137 myAISContext->Display(ais1,Standard_False);
2138 const Handle(AIS_InteractiveObject)& anIO1 = ais1;
2139 myAISContext->SetSelected (anIO1, Standard_False);
2143 TopExp_Explorer Ex1;
2144 Ex1.Init(S1,TopAbs_FACE);
2150 TopoDS_Face F1 = TopoDS::Face(Ex1.Current());
2151 TopoDS_Shape S2 = BRepPrimAPI_MakeBox(gp_Pnt(-400., -400., 300.), gp_Pnt(-200., -300., 500.)).Shape();
2152 Handle(AIS_Shape) ais2 = new AIS_Shape(S2);
2154 myAISContext->SetColor(ais2,Quantity_NOC_AZURE,Standard_False);
2155 myAISContext->SetMaterial(ais2,Graphic3d_NOM_PLASTIC,Standard_False);
2156 myAISContext->Display(ais2,Standard_False);
2157 const Handle(AIS_InteractiveObject)& anIO2 = ais2;
2158 myAISContext->SetSelected (anIO2, Standard_False);
2162 TopExp_Explorer Ex2;
2163 Ex2.Init(S2,TopAbs_FACE);
2168 TopoDS_Face F2 = TopoDS::Face(Ex2.Current());
2169 BRepFeat_Gluer glue(S2,S1);
2171 TopoDS_Shape res1 = glue.Shape();
2172 myAISContext->Erase(ais2,Standard_False);
2176 myAISContext->Redisplay (ais1, Standard_False);
2177 myAISContext->SetSelected(anIO1,Standard_False);
2181 TopoDS_Shape S3 = BRepPrimAPI_MakeBox(500., 400., 300.).Shape();
2183 Handle(AIS_Shape) ais3 = new AIS_Shape(S3);
2184 myAISContext->SetColor(ais3,Quantity_NOC_ORANGE,Standard_False);
2185 myAISContext->SetMaterial(ais3,Graphic3d_NOM_PLASTIC,Standard_False);
2186 myAISContext->Display(ais3,Standard_False);
2187 const Handle(AIS_InteractiveObject)& anIO3 = ais3;
2188 myAISContext->SetSelected (anIO3, Standard_False);
2192 TopExp_Explorer Ex3;
2193 Ex3.Init(S3,TopAbs_FACE);
2199 TopoDS_Face F3 = TopoDS::Face(Ex3.Current());
2200 TopoDS_Shape S4 = BRepPrimAPI_MakeBox(gp_Pnt(0., 0., 300.), gp_Pnt(200., 200., 500.)).Shape();
2202 Handle(AIS_Shape) ais4 = new AIS_Shape(S4);
2203 myAISContext->SetColor(ais4,Quantity_NOC_AZURE,Standard_False);
2204 myAISContext->SetMaterial(ais4,Graphic3d_NOM_PLASTIC,Standard_False);
2205 myAISContext->Display(ais4,Standard_False);
2206 const Handle(AIS_InteractiveObject)& anIO4 = ais4;
2207 myAISContext->SetSelected (anIO4, Standard_False);
2211 TopExp_Explorer Ex4;
2212 Ex4.Init(S4,TopAbs_FACE);
2217 TopoDS_Face F4 = TopoDS::Face(Ex4.Current());
2218 BRepFeat_Gluer glue2(S4,S3);
2220 LocOpe_FindEdges CommonEdges(F4,F3);
2221 for (CommonEdges.InitIterator(); CommonEdges.More(); CommonEdges.Next())
2222 glue2.Bind(CommonEdges.EdgeFrom(),CommonEdges.EdgeTo());
2223 TopoDS_Shape res2 = glue2.Shape();
2224 myAISContext->Erase(ais3,Standard_False);
2228 myAISContext->Redisplay(ais4,Standard_False);
2229 myAISContext->SetSelected(anIO4,Standard_False);
2233 TCollection_AsciiString Message ("\
2235 --- Without common edges ---\n\
2237 TopoDS_Shape S1 = BRepPrimAPI_MakeBox(gp_Pnt(-500.,-500.,0.),gp_Pnt(-100.,-250.,300.));\n\
2238 TopExp_Explorer Ex1;\n\
2239 Ex1.Init(S1,TopAbs_FACE);\n\
2245 TopoDS_Face F1 = TopoDS::Face(Ex1.Current());\n\
2246 TopoDS_Shape S2 = BRepPrimAPI_MakeBox(gp_Pnt(-400.,-400.,300.),gp_Pnt(-200.,-300.,500.));\n\
2247 TopExp_Explorer Ex2;\n\
2248 Ex2.Init(S2,TopAbs_FACE);\n\
2253 TopoDS_Face F2 = TopoDS::Face(Ex2.Current());\n\
2254 BRepFeat_Gluer glue(S2,S1);\n\
2255 glue.Bind(F2,F1);\n\
2256 TopoDS_Shape res1 = glue.Shape();\n\
2258 --- With common edges ---\n\
2260 TopoDS_Shape S3 = BRepPrimAPI_MakeBox(500.,400.,300.);\n\
2261 TopExp_Explorer Ex3;\n\
2262 Ex3.Init(S3,TopAbs_FACE);\n\
2268 TopoDS_Face F3 = TopoDS::Face(Ex3.Current());\n\
2269 TopoDS_Shape S4 = BRepPrimAPI_MakeBox(gp_Pnt(0.,0.,300.),gp_Pnt(200.,200.,500.));\n\
2270 TopExp_Explorer Ex4;\n\
2271 Ex4.Init(S4,TopAbs_FACE);\n\
2276 TopoDS_Face F4 = TopoDS::Face(Ex4.Current());\n\
2277 BRepFeat_Gluer glue2(S4,S3);\n\
2278 glue2.Bind(F4,F3);\n\
2279 LocOpe_FindEdges CommonEdges(F4,F3);\n\
2280 for (CommonEdges.InitIterator(); CommonEdges.More(); CommonEdges.Next()) \n\
2281 glue2.Bind(CommonEdges.EdgeFrom(),CommonEdges.EdgeTo());\n\
2282 TopoDS_Shape res2 = glue2.Shape();\n\
2284 PocessTextInDialog("Glue two solids", Message);
2288 void CModelingDoc::OnPipeLocal()
2290 AIS_ListOfInteractive aList;
2291 myAISContext->DisplayedObjects(aList);
2292 AIS_ListIteratorOfListOfInteractive aListIterator;
2293 for(aListIterator.Initialize(aList);aListIterator.More();aListIterator.Next()){
2294 myAISContext->Remove (aListIterator.Value(), Standard_False);
2296 TopoDS_Shape S = BRepPrimAPI_MakeBox(400., 250., 300.).Shape();
2297 Handle(AIS_Shape) ais1 = new AIS_Shape(S);
2299 myAISContext->SetColor(ais1,Quantity_NOC_CORAL,Standard_False);
2300 myAISContext->SetMaterial(ais1,Graphic3d_NOM_PLASTIC,Standard_False);
2301 myAISContext->Display(ais1,Standard_False);
2302 const Handle(AIS_InteractiveObject)& anIO1 = ais1;
2303 myAISContext->SetSelected (anIO1, Standard_False);
2308 Ex.Init(S,TopAbs_FACE);
2311 TopoDS_Face F1 = TopoDS::Face(Ex.Current());
2312 Handle(Geom_Surface) surf = BRep_Tool::Surface(F1);
2313 BRepBuilderAPI_MakeWire MW1;
2315 p1 = gp_Pnt2d(100.,100.);
2316 p2 = gp_Pnt2d(200.,100.);
2317 Handle(Geom2d_Line) aline = GCE2d_MakeLine(p1,p2).Value();
2318 MW1.Add(BRepBuilderAPI_MakeEdge(aline,surf,0.,p1.Distance(p2)));
2320 p2 = gp_Pnt2d(150.,200.);
2321 aline = GCE2d_MakeLine(p1,p2).Value();
2322 MW1.Add(BRepBuilderAPI_MakeEdge(aline,surf,0.,p1.Distance(p2)));
2324 p2 = gp_Pnt2d(100.,100.);
2325 aline = GCE2d_MakeLine(p1,p2).Value();
2326 MW1.Add(BRepBuilderAPI_MakeEdge(aline,surf,0.,p1.Distance(p2)));
2327 BRepBuilderAPI_MakeFace MKF1;
2328 MKF1.Init(surf,Standard_False, Precision::Confusion());
2329 MKF1.Add(MW1.Wire());
2330 TopoDS_Face FP = MKF1.Face();
2331 BRepLib::BuildCurves3d(FP);
2332 TColgp_Array1OfPnt CurvePoles(1,3);
2333 gp_Pnt pt = gp_Pnt(150.,0.,150.);
2335 pt = gp_Pnt(200.,-100.,150.);
2337 pt = gp_Pnt(150.,-200.,150.);
2339 Handle(Geom_BezierCurve) curve = new Geom_BezierCurve(CurvePoles);
2340 TopoDS_Edge E = BRepBuilderAPI_MakeEdge(curve);
2341 TopoDS_Wire W = BRepBuilderAPI_MakeWire(E);
2342 BRepFeat_MakePipe MKPipe(S,FP,F1,W,1,Standard_True);
2344 TopoDS_Shape res1 = MKPipe.Shape();
2347 myAISContext->Redisplay(ais1,Standard_False);
2348 myAISContext->SetSelected(anIO1,Standard_False);
2351 TCollection_AsciiString Message ("\
2353 TopoDS_Shape S = BRepPrimAPI_MakeBox(400.,250.,300.);\n\
2354 TopExp_Explorer Ex;\n\
2355 Ex.Init(S,TopAbs_FACE);\n\
2358 TopoDS_Face F1 = TopoDS::Face(Ex.Current());\n\
2359 Handle(Geom_Surface) surf = BRep_Tool::Surface(F1);\n\
2360 BRepBuilderAPI_MakeWire MW1;\n\
2362 p1 = gp_Pnt2d(100.,100.);\n\
2363 p2 = gp_Pnt2d(200.,100.);\n\
2364 Handle(Geom2d_Line) aline = GCE2d_MakeLine(p1,p2).Value();\n\
2365 MW1.Add(BRepBuilderAPI_MakeEdge(aline,surf,0.,p1.Distance(p2)));\n\
2367 p2 = gp_Pnt2d(150.,200.);\n\
2368 aline = GCE2d_MakeLine(p1,p2).Value();\n\
2369 MW1.Add(BRepBuilderAPI_MakeEdge(aline,surf,0.,p1.Distance(p2)));\n\
2371 p2 = gp_Pnt2d(100.,100.);\n\
2372 aline = GCE2d_MakeLine(p1,p2).Value();\n\
2373 MW1.Add(BRepBuilderAPI_MakeEdge(aline,surf,0.,p1.Distance(p2)));\n\
2374 BRepBuilderAPI_MakeFace MKF1;\n\
2375 MKF1.Init(surf,Standard_False);\n\
2376 TopoDS_Face FP = MKF1.Face();\n\
2377 BRepLib::BuildCurves3d(FP);\n\
2378 TColgp_Array1OfPnt CurvePoles(1,3);\n\
2379 gp_Pnt pt = gp_Pnt(150.,0.,150.);\n\
2380 CurvePoles(1) = pt;\n\
2381 pt = gp_Pnt(200.,-100.,150.);\n\
2382 CurvePoles(2) = pt;\n\
2383 pt = gp_Pnt(150.,-200.,150.);\n\
2384 CurvePoles(3) = pt;\n\
2385 Handle(Geom_BezierCurve) curve = new Geom_BezierCurve(CurvePoles);\n\
2386 TopoDS_Edge E = BRepBuilderAPI_MakeEdge(curve);\n\
2387 TopoDS_Wire W = BRepBuilderAPI_MakeWire(E);\n\
2388 BRepFeat_MakePipe MKPipe(S,FP,F1,W,1,Standard_True);\n\
2389 MKPipe.Perform();\n\
2390 TopoDS_Shape res1 = MKPipe.Shape();\n\
2392 PocessTextInDialog("Make a local pipe", Message);
2396 void CModelingDoc::OnLinearLocal()
2398 AIS_ListOfInteractive aList;
2399 myAISContext->DisplayedObjects(aList);
2400 AIS_ListIteratorOfListOfInteractive aListIterator;
2401 for(aListIterator.Initialize(aList);aListIterator.More();aListIterator.Next()){
2402 myAISContext->Remove (aListIterator.Value(), Standard_False);
2404 BRepBuilderAPI_MakeWire mkw;
2405 gp_Pnt p1 = gp_Pnt(0.,0.,0.);
2406 gp_Pnt p2 = gp_Pnt(200.,0.,0.);
2407 mkw.Add(BRepBuilderAPI_MakeEdge(p1,p2));
2409 p2 = gp_Pnt(200.,0.,50.);
2410 mkw.Add(BRepBuilderAPI_MakeEdge(p1,p2));
2412 p2 = gp_Pnt(50.,0.,50.);
2413 mkw.Add(BRepBuilderAPI_MakeEdge(p1,p2));
2415 p2 = gp_Pnt(50.,0.,200.);
2416 mkw.Add(BRepBuilderAPI_MakeEdge(p1,p2));
2418 p2 = gp_Pnt(0.,0.,200.);
2419 mkw.Add(BRepBuilderAPI_MakeEdge(p1,p2));
2421 mkw.Add(BRepBuilderAPI_MakeEdge(p2,gp_Pnt(0.,0.,0.)));
2423 TopoDS_Shape S = BRepPrimAPI_MakePrism(BRepBuilderAPI_MakeFace(mkw.Wire()),
2424 gp_Vec(gp_Pnt(0.,0.,0.),gp_Pnt(0.,100.,0.)));
2426 Handle(AIS_Shape) ais1 = new AIS_Shape(S);
2427 myAISContext->SetColor(ais1,Quantity_NOC_CYAN2,Standard_False);
2428 myAISContext->SetMaterial(ais1,Graphic3d_NOM_PLASTIC,Standard_False);
2429 myAISContext->Display(ais1,Standard_False);
2430 const Handle(AIS_InteractiveObject)& anIO1 = ais1;
2431 myAISContext->SetSelected (anIO1, Standard_False);
2435 TopoDS_Wire W = BRepBuilderAPI_MakeWire(BRepBuilderAPI_MakeEdge(gp_Pnt(50.,45.,100.),
2436 gp_Pnt(100.,45.,50.)));
2437 Handle(Geom_Plane) aplane = new Geom_Plane(0.,1.,0.,-45.);
2438 BRepFeat_MakeLinearForm aform(S, W, aplane, gp_Vec(0.,10.,0.), gp_Vec(0.,0.,0.),
2440 aform.Perform(/*10.*/); // new in 2.0
2442 TopoDS_Shape res = aform.Shape();
2444 myAISContext->Redisplay(ais1,Standard_False);
2445 myAISContext->SetSelected (anIO1, Standard_False);
2448 TCollection_AsciiString Message ("\
2450 BRepBuilderAPI_MakeWire mkw;\n\
2451 gp_Pnt p1 = gp_Pnt(0.,0.,0.);\n\
2452 gp_Pnt p2 = gp_Pnt(200.,0.,0.);\n\
2453 mkw.Add(BRepBuilderAPI_MakeEdge(p1,p2));\n\
2455 p2 = gp_Pnt(200.,0.,50.);\n\
2456 mkw.Add(BRepBuilderAPI_MakeEdge(p1,p2));\n\
2458 p2 = gp_Pnt(50.,0.,50.);\n\
2459 mkw.Add(BRepBuilderAPI_MakeEdge(p1,p2));\n\
2461 p2 = gp_Pnt(50.,0.,200.);\n\
2462 mkw.Add(BRepBuilderAPI_MakeEdge(p1,p2));\n\
2464 p2 = gp_Pnt(0.,0.,200.);\n\
2465 mkw.Add(BRepBuilderAPI_MakeEdge(p1,p2));\n\
2467 mkw.Add(BRepBuilderAPI_MakeEdge(p2,gp_Pnt(0.,0.,0.)));\n\
2468 TopoDS_Shape S = BRepPrimAPI_MakePrism(BRepBuilderAPI_MakeFace(mkw.Wire()), \n\
2469 gp_Vec(gp_Pnt(0.,0.,0.),gp_Pnt(0.,100.,0.)));\n\
2470 TopoDS_Wire W = BRepBuilderAPI_MakeWire(BRepBuilderAPI_MakeEdge(gp_Pnt(50.,45.,100.),\n\
2471 gp_Pnt(100.,45.,50.)));\n\
2472 Handle(Geom_Plane) aplane = new Geom_Plane(0.,1.,0.,-45.);\n\
2473 BRepFeat_MakeLinearForm aform(S, W, aplane, gp_Dir(0.,10.,0.), gp_Dir(0.,0.,0.),\n\
2474 1, Standard_True);\n\
2475 aform.Perform(10.);\n\
2476 TopoDS_Shape res = aform.Shape();\n\
2478 PocessTextInDialog("Make a rib", Message);
2482 void CModelingDoc::OnSplitLocal()
2484 AIS_ListOfInteractive aList;
2485 myAISContext->DisplayedObjects(aList);
2486 AIS_ListIteratorOfListOfInteractive aListIterator;
2487 for(aListIterator.Initialize(aList);aListIterator.More();aListIterator.Next()){
2488 myAISContext->Remove (aListIterator.Value(), Standard_False);
2491 TopoDS_Shape S = BRepPrimAPI_MakeBox(gp_Pnt(-100, -60, -80), 150, 200, 170).Shape();
2493 Handle(AIS_Shape) ais1 = new AIS_Shape(S);
2494 myAISContext->SetColor(ais1,Quantity_NOC_RED,Standard_False);
2495 myAISContext->SetMaterial(ais1,Graphic3d_NOM_PLASTIC,Standard_False);
2496 myAISContext->Display(ais1,Standard_False);
2497 const Handle(AIS_InteractiveObject)& anIO1 = ais1;
2498 myAISContext->SetSelected (anIO1, Standard_False);
2502 BRepAlgoAPI_Section asect(S, gp_Pln(1,2,1,-15),Standard_False);
2503 asect.ComputePCurveOn1(Standard_True);
2504 asect.Approximation(Standard_True);
2506 TopoDS_Shape R = asect.Shape();
2508 BRepFeat_SplitShape asplit(S);
2510 for (TopExp_Explorer Ex(R,TopAbs_EDGE); Ex.More(); Ex.Next()) {
2511 TopoDS_Shape anEdge = Ex.Current();
2513 if (asect.HasAncestorFaceOn1(anEdge,aFace)) {
2514 TopoDS_Face F = TopoDS::Face(aFace);
2515 TopoDS_Edge E = TopoDS::Edge(anEdge);
2523 myAISContext->Erase(ais1,Standard_False);
2526 TopoDS_Shape Result = asplit.Shape();
2528 Handle(AIS_Shape) ais2 = new AIS_Shape(Result);
2530 myAISContext->SetColor(ais2,Quantity_NOC_RED,Standard_False);
2531 myAISContext->SetMaterial(ais2,Graphic3d_NOM_PLASTIC,Standard_False);
2532 myAISContext->SetDisplayMode(ais2,1,Standard_False);
2533 myAISContext->Display(ais2,Standard_False);
2534 const Handle(AIS_InteractiveObject)& anIO2 = ais2;
2535 myAISContext->SetSelected (anIO2, Standard_False);
2537 TCollection_AsciiString Message ("\
2539 TopoDS_Shape S = BRepPrimAPI_MakeBox(gp_Pnt(-100,-60,-80),150,200,170); \n\
2541 BRepBuilderAPI_Section asect(S, gp_Pln(1,2,1,-15),Standard_False); \n\
2542 asect.ComputePCurveOn1(Standard_True); \n\
2543 asect.Approximation(Standard_True); \n\
2545 TopoDS_Shape R = asect.Shape(); \n\
2547 BRepFeat_SplitShape asplit(S); \n\
2549 for (TopExp_Explorer Ex(R,TopAbs_EDGE); Ex.More(); Ex.Next()) { \n\
2550 TopoDS_Shape anEdge = Ex.Current(); \n\
2551 TopoDS_Shape aFace; \n\
2552 if (asect.HasAncestorFaceOn1(anEdge,aFace)) { \n\
2553 TopoDS_Face F = TopoDS::Face(aFace); \n\
2554 TopoDS_Edge E = TopoDS::Edge(anEdge); \n\
2555 asplit.Add(E,F); \n\
2561 TopoDS_Shape Result = asplit.Shape(); \n\
2565 PocessTextInDialog("Split a shape", Message);
2570 void CModelingDoc::OnThickLocal()
2572 AIS_ListOfInteractive L;
2573 myAISContext->DisplayedObjects(L);
2574 AIS_ListIteratorOfListOfInteractive aListIterator;
2575 for(aListIterator.Initialize(L);aListIterator.More();aListIterator.Next()){
2576 myAISContext->Remove (aListIterator.Value(), Standard_False);
2579 TopoDS_Shape S1 = BRepPrimAPI_MakeBox(150, 200, 110).Shape();
2581 Handle(AIS_Shape) abox1 = new AIS_Shape(S1);
2582 myAISContext->SetColor (abox1, Quantity_NOC_WHITE, Standard_False);
2583 myAISContext->SetMaterial(abox1,Graphic3d_NOM_PLASTIC,Standard_False);
2584 myAISContext->Display(abox1,Standard_False);
2585 const Handle(AIS_InteractiveObject)& anIOBox1 = abox1;
2586 myAISContext->SetSelected (anIOBox1, Standard_False);
2590 TopTools_ListOfShape aList;
2591 TopExp_Explorer Ex(S1,TopAbs_FACE);
2592 Ex.Next(); //this is the front face
2593 TopoDS_Shape aFace = Ex.Current();
2594 aList.Append(aFace);
2596 BRepOffsetAPI_MakeThickSolid aSolidMaker;
2597 aSolidMaker.MakeThickSolidByJoin(S1,aList,10,0.01);
2598 TopoDS_Shape aThickSolid = aSolidMaker.Shape();
2600 Handle(AIS_Shape) ais1 = new AIS_Shape(aThickSolid);
2601 myAISContext->SetColor(ais1,Quantity_NOC_RED,Standard_False);
2602 myAISContext->SetMaterial(ais1,Graphic3d_NOM_PLASTIC,Standard_False);
2603 myAISContext->Display(ais1,Standard_False);
2604 const Handle(AIS_InteractiveObject)& anIO1 = ais1;
2605 myAISContext->SetSelected (anIO1, Standard_False);
2609 myAISContext->Erase(abox1,Standard_True);
2613 TCollection_AsciiString Message ("\
2615 TopoDS_Shape S = BRepPrimAPI_MakeBox(150,200,110); \n\
2617 TopTools_ListOfShape aList; \n\
2618 TopExp_Explorer Ex(S,TopAbs_FACE); \n\
2619 Ex.Next(); //in order to recover the front face \n\
2620 TopoDS_Shape aFace = Ex.Current(); \n\
2621 aList.Append(aFace); \n\
2623 TopoDS_Shape aThickSolid = BRepPrimAPI_MakeThickSolid(S,aList,15,0.01); \n\
2626 PocessTextInDialog("Make a thick solid", Message);
2629 void CModelingDoc::OnOffsetLocal()
2631 AIS_ListOfInteractive aList;
2632 myAISContext->DisplayedObjects(aList);
2633 AIS_ListIteratorOfListOfInteractive aListIterator;
2634 for(aListIterator.Initialize(aList);aListIterator.More();aListIterator.Next()){
2635 myAISContext->Remove (aListIterator.Value(), Standard_False);
2638 TopoDS_Shape S1 = BRepPrimAPI_MakeBox(150, 200, 110).Shape();
2640 Handle(AIS_Shape) aisBox1 = new AIS_Shape(S1);
2641 myAISContext->SetColor(aisBox1,Quantity_NOC_BROWN,Standard_False);
2642 myAISContext->SetMaterial(aisBox1,Graphic3d_NOM_GOLD,Standard_False);
2643 myAISContext->Display(aisBox1,Standard_False);
2647 BRepOffsetAPI_MakeOffsetShape aShapeMaker1;
2648 aShapeMaker1.PerformByJoin(S1,60,0.01);
2649 TopoDS_Shape anOffsetShape1 = aShapeMaker1.Shape();
2651 Handle(AIS_Shape) ais1 = new AIS_Shape(anOffsetShape1);
2652 myAISContext->SetColor(ais1,Quantity_NOC_MATRABLUE,Standard_False);
2653 myAISContext->SetMaterial(ais1,Graphic3d_NOM_GOLD,Standard_False);
2654 myAISContext->SetTransparency(ais1,0.5,Standard_False);
2655 myAISContext->Display(ais1,Standard_False);
2659 TopoDS_Shape S2 = BRepPrimAPI_MakeBox(gp_Pnt(500, 0, 0), 220, 140, 180).Shape();
2661 Handle(AIS_Shape) aisBox2 = new AIS_Shape(S2);
2662 myAISContext->SetColor(aisBox2,Quantity_NOC_WHITE,Standard_False);
2663 myAISContext->SetMaterial(aisBox2,Graphic3d_NOM_GOLD,Standard_False);
2664 myAISContext->SetTransparency(aisBox2,0.5,Standard_False);
2665 myAISContext->Display(aisBox2,Standard_False);
2669 BRepOffsetAPI_MakeOffsetShape aShapeMaker2;
2670 aShapeMaker2.PerformByJoin(S2,-40,0.01,
2671 BRepOffset_Skin,Standard_False,Standard_False,GeomAbs_Arc);
2672 TopoDS_Shape anOffsetShape2 = aShapeMaker2.Shape();
2674 Handle(AIS_Shape) ais2 = new AIS_Shape(anOffsetShape2);
2675 myAISContext->SetColor (ais2, Quantity_NOC_MATRABLUE, Standard_False);
2676 myAISContext->SetMaterial(ais2,Graphic3d_NOM_GOLD,Standard_False);
2677 myAISContext->Display (ais2, Standard_False);
2680 TCollection_AsciiString Message ("\
2683 TopoDS_Shape S1 = BRepPrimAPI_MakeBox(150,200,110); \n\
2685 TopoDS_Shape anOffsetShape1 = BRepPrimAPI_MakeOffsetShape(S1,60,0.01); \n\
2689 TopoDS_Shape S2 = BRepPrimAPI_MakeBox(gp_Pnt(300,0,0),220,140,180); \n\
2691 TopoDS_Shape anOffsetShape2 = BRepPrimAPI_MakeOffsetShape(S2,-20,0.01, \n\
2692 BRepOffset_Skin,Standard_False,Standard_False,GeomAbs_Arc); \n\
2696 PocessTextInDialog("Make an offset shape", Message);
2700 /* =================================================================================
2701 ==================== B U I L D I N G ========================================
2702 ================================================================================= */
2705 void CModelingDoc::OnVertex()
2707 AIS_ListOfInteractive aList;
2708 myAISContext->DisplayedObjects(aList);
2709 AIS_ListIteratorOfListOfInteractive aListIterator;
2710 for(aListIterator.Initialize(aList);aListIterator.More();aListIterator.Next()){
2711 myAISContext->Remove (aListIterator.Value(), Standard_False);
2714 TopoDS_Vertex V1,V2,V3;
2716 V1 = BRepBuilderAPI_MakeVertex(gp_Pnt(0,0,0));
2717 V2 = BRepBuilderAPI_MakeVertex(gp_Pnt(10,7,25));
2720 BRepBuilderAPI_MakeVertex MV(P);
2723 Handle(AIS_Shape) Point1 = new AIS_Shape(V1);
2724 myAISContext->Display(Point1,Standard_False);
2725 Handle(AIS_Shape) Point2 = new AIS_Shape(V2);
2726 myAISContext->Display(Point2,Standard_False);
2727 Handle(AIS_Shape) Point3 = new AIS_Shape(V3);
2728 myAISContext->Display(Point3,Standard_False);
2732 TCollection_AsciiString Message ("\
2734 TopoDS_Vertex V1,V2,V3; \n\
2736 V1 = BRepBuilderAPI_MakeVertex(gp_Pnt(0,0,0)); \n\
2738 V2 = BRepBuilderAPI_MakeVertex(gp_Pnt(10,7,25)); \n\
2740 gp_Pnt P(-12,8,-4); \n\
2741 BRepBuilderAPI_MakeVertex MV(P); \n\
2742 V3 = MV.Vertex(); \n\
2746 PocessTextInDialog("Make vertex from point ", Message);
2750 void CModelingDoc::OnEdge()
2753 AIS_ListOfInteractive aList;
2754 myAISContext->DisplayedObjects(aList);
2755 AIS_ListIteratorOfListOfInteractive aListIterator;
2756 for(aListIterator.Initialize(aList);aListIterator.More();aListIterator.Next()){
2757 myAISContext->Remove (aListIterator.Value(), Standard_False);
2761 TopoDS_Edge BlueEdge,YellowEdge,WhiteEdge,RedEdge,GreenEdge;
2762 TopoDS_Vertex V1,V2,V3,V4;
2764 /////////////The blue edge
2766 BlueEdge = BRepBuilderAPI_MakeEdge(gp_Pnt(-80,-50,-20),gp_Pnt(-30,-60,-60));
2768 /////////////The yellow edge
2770 V1 = BRepBuilderAPI_MakeVertex(gp_Pnt(-20,10,-30));
2771 V2 = BRepBuilderAPI_MakeVertex(gp_Pnt(10,7,-25));
2772 YellowEdge = BRepBuilderAPI_MakeEdge(V1,V2);
2774 /////////////The white edge
2776 gp_Lin line(gp_Ax1(gp_Pnt(10,10,10),gp_Dir(1,0,0)));
2777 WhiteEdge = BRepBuilderAPI_MakeEdge(line,-20,10);
2779 //////////////The red edge
2781 gp_Elips Elips(gp_Ax2(gp_Pnt(10,0,0),gp_Dir(1,1,1)),60,30);
2782 RedEdge = BRepBuilderAPI_MakeEdge(Elips,0,M_PI/2);
2784 /////////////The green edge and the both extreme vertex
2786 gp_Pnt P1(-15,200,10);
2788 gp_Pnt P3(15,200,0);
2789 gp_Pnt P4(-15,20,15);
2792 gp_Pnt P7(24,120,0);
2793 gp_Pnt P8(-24,120,12.5);
2794 TColgp_Array1OfPnt array(1,8);
2795 array.SetValue(1,P1);
2796 array.SetValue(2,P2);
2797 array.SetValue(3,P3);
2798 array.SetValue(4,P4);
2799 array.SetValue(5,P5);
2800 array.SetValue(6,P6);
2801 array.SetValue(7,P7);
2802 array.SetValue(8,P8);
2803 Handle (Geom_BezierCurve) curve = new Geom_BezierCurve(array);
2805 BRepBuilderAPI_MakeEdge ME (curve);
2810 //////////////Display
2811 Handle(AIS_Shape) blue = new AIS_Shape(BlueEdge);
2812 myAISContext->SetColor(blue,Quantity_NOC_MATRABLUE,Standard_False);
2813 myAISContext->Display(blue,Standard_False);
2815 Handle(AIS_Shape) yellow = new AIS_Shape(YellowEdge);
2816 myAISContext->SetColor(yellow,Quantity_NOC_YELLOW,Standard_False);
2817 myAISContext->Display(yellow,Standard_False);
2819 Handle(AIS_Shape) white = new AIS_Shape(WhiteEdge);
2820 myAISContext->SetColor(white,Quantity_NOC_WHITE,Standard_False);
2821 myAISContext->Display(white,Standard_False);
2823 Handle(AIS_Shape) red = new AIS_Shape(RedEdge);
2824 myAISContext->SetColor(red,Quantity_NOC_RED,Standard_False);
2825 myAISContext->Display(red,Standard_False);
2827 Handle(AIS_Shape) green = new AIS_Shape(GreenEdge);
2828 myAISContext->SetColor(green,Quantity_NOC_GREEN,Standard_False);
2829 myAISContext->Display(green,Standard_False);
2831 Handle(AIS_Shape) Point1 = new AIS_Shape(V3);
2832 myAISContext->Display(Point1,Standard_False);
2833 Handle(AIS_Shape) Point2 = new AIS_Shape(V4);
2834 myAISContext->Display(Point2,Standard_False);
2838 TCollection_AsciiString Message ("\
2840 TopoDS_Edge BlueEdge, YellowEdge, WhiteEdge, RedEdge, GreenEdge; \n\
2841 TopoDS_Vertex V1,V2,V3,V4; \n\
2843 /////////////The blue edge \n\
2845 BlueEdge = BRepBuilderAPI_MakeEdge(gp_Pnt(-80,-50,-20),gp_Pnt(-30,-60,-60)); \n\
2847 /////////////The yellow edge \n\
2849 V1 = BRepBuilderAPI_MakeVertex(gp_Pnt(-20,10,-30)); \n\
2850 V2 = BRepBuilderAPI_MakeVertex(gp_Pnt(10,7,-25)); \n\
2851 YellowEdge = BRepBuilderAPI_MakeEdge(V1,V2); \n\
2853 /////////////The white edge \n\
2855 gp_Lin line(gp_Ax1(gp_Pnt(10,10,10),gp_Dir(1,0,0))); \n\
2856 WhiteEdge = BRepBuilderAPI_MakeEdge(line,-20,10); \n\
2858 //////////////The red edge \n\
2860 gp_Elips Elips(gp_Ax2(gp_Pnt(10,0,0),gp_Dir(1,1,1)),60,30); \n\
2861 RedEdge = BRepBuilderAPI_MakeEdge(Elips,0,PI/2); \n\
2863 /////////////The green edge and the both extreme vertex \n\
2865 gp_Pnt P1(-15,200,10); \n\
2866 gp_Pnt P2(5,204,0); \n\
2867 gp_Pnt P3(15,200,0); \n\
2868 gp_Pnt P4(-15,20,15); \n\
2869 gp_Pnt P5(-5,20,0); \n\
2870 gp_Pnt P6(15,20,0); \n\
2871 gp_Pnt P7(24,120,0); \n\
2872 gp_Pnt P8(-24,120,12.5); \n\
2873 TColgp_Array1OfPnt array(1,8); \n\
2874 array.SetValue(1,P1); \n\
2875 array.SetValue(2,P2); \n\
2876 array.SetValue(3,P3); \n\
2877 array.SetValue(4,P4); \n\
2878 array.SetValue(5,P5); \n\
2879 array.SetValue(6,P6); \n\
2880 array.SetValue(7,P7); \n\
2881 array.SetValue(8,P8); \n\
2882 Handle (Geom_BezierCurve) curve = new Geom_BezierCurve(array); \n\
2884 BRepBuilderAPI_MakeEdge ME (curve); \n\
2886 V3 = ME.Vertex1(); \n\
2887 V4 = ME.Vertex2(); \n\
2891 PocessTextInDialog("Make edge", Message);
2895 void CModelingDoc::OnWire()
2897 AIS_ListOfInteractive aList;
2898 myAISContext->DisplayedObjects(aList);
2899 AIS_ListIteratorOfListOfInteractive aListIterator;
2900 for(aListIterator.Initialize(aList);aListIterator.More();aListIterator.Next()){
2901 myAISContext->Remove (aListIterator.Value(), Standard_False);
2904 TopoDS_Wire RedWire,YellowWire,WhiteWire,
2905 ExistingWire, ExistingWire2;
2907 TopoDS_Edge Edge1,Edge2,Edge3,Edge4,Edge5,Edge6,Edge7,LastEdge;
2908 TopoDS_Vertex LastVertex;
2910 ////////////The red wire is build from a single edge
2912 gp_Elips Elips(gp_Ax2(gp_Pnt(250,0,0),gp_Dir(1,1,1)),160,90);
2913 Edge1 = BRepBuilderAPI_MakeEdge(Elips,0,M_PI/2);
2915 RedWire = BRepBuilderAPI_MakeWire(Edge1);
2917 ///////////the yellow wire is build from an existing wire and an edge
2919 gp_Circ circle(gp_Ax2(gp_Pnt(-300,0,0),gp_Dir(1,0,0)),80);
2920 Edge2 = BRepBuilderAPI_MakeEdge(circle,0,M_PI);
2922 ExistingWire = BRepBuilderAPI_MakeWire(Edge2);
2924 Edge3 = BRepBuilderAPI_MakeEdge(gp_Pnt(-300,0,-80),gp_Pnt(-90,20,-30));
2926 BRepBuilderAPI_MakeWire MW1(ExistingWire,Edge3);
2932 //////////the white wire is built with an existing wire and 3 edges.
2933 //////////we use the methods Add, Edge and Vertex from BRepBuilderAPI_MakeWire.
2935 gp_Circ circle2(gp_Ax2(gp_Pnt(0,0,0),gp_Dir(0,1,0)),200);
2936 Edge4 = BRepBuilderAPI_MakeEdge(circle2,0,M_PI);
2938 ExistingWire2 = BRepBuilderAPI_MakeWire(Edge4);
2940 gp_Pnt P1(0,0,-200);
2942 Edge5 = BRepBuilderAPI_MakeEdge(P1,P2);
2944 gp_Pnt P3(-15,20,15);
2945 Edge6 = BRepBuilderAPI_MakeEdge(P2,P3);
2947 Edge7 = BRepBuilderAPI_MakeEdge(P3,P4);
2949 BRepBuilderAPI_MakeWire MW;
2950 MW.Add(ExistingWire2);
2956 WhiteWire = MW.Wire();
2957 LastEdge = MW.Edge();
2958 LastVertex = MW.Vertex();
2962 Handle(AIS_Shape) red = new AIS_Shape(RedWire);
2963 myAISContext->SetColor(red,Quantity_NOC_RED,Standard_False);
2964 myAISContext->Display(red,Standard_False);
2966 Handle(AIS_Shape) yellow = new AIS_Shape(YellowWire);
2967 myAISContext->SetColor(yellow,Quantity_NOC_YELLOW,Standard_False);
2968 myAISContext->Display(yellow,Standard_False);
2970 Handle(AIS_Shape) white = new AIS_Shape(WhiteWire);
2971 myAISContext->SetColor(white,Quantity_NOC_WHITE,Standard_False);
2972 myAISContext->Display(white,Standard_False);
2974 Handle(AIS_Shape) lastE = new AIS_Shape(LastEdge);
2975 myAISContext->SetWidth(lastE,3,Standard_False);
2976 myAISContext->SetColor(lastE,Quantity_NOC_RED,Standard_False);
2977 myAISContext->Display(lastE,Standard_False);
2979 Handle(AIS_Shape) lastV = new AIS_Shape(LastVertex);
2980 myAISContext->Display(lastV,Standard_False);
2984 TCollection_AsciiString Message ("\
2986 TopoDS_Wire RedWire,YellowWire,WhiteWire, \n\
2987 ExistingWire, ExistingWire2; \n\
2989 TopoDS_Edge Edge1,Edge2,Edge3,Edge4,Edge5,Edge6,Edge7,LastEdge; \n\
2990 TopoDS_Vertex LastVertex; \n\
2992 ////////////The red wire is build from a single edge \n\
2994 gp_Elips Elips(gp_Ax2(gp_Pnt(10,0,0),gp_Dir(1,1,1)),160,90); \n\
2995 Edge1 = BRepBuilderAPI_MakeEdge(Elips,0,PI/2); \n\
2997 RedWire = BRepBuilderAPI_MakeWire(Edge1); \n\
2999 ///////////the yellow wire is build from an existing wire and an edge \n\
3001 gp_Circ circle(gp_Ax2(gp_Pnt(0,0,0),gp_Dir(1,0,0)),80); \n\
3002 Edge2 = BRepBuilderAPI_MakeEdge(circle,0,PI); \n\
3004 ExistingWire = BRepBuilderAPI_MakeWire(Edge2); \n\
3006 Edge3 = BRepBuilderAPI_MakeEdge(gp_Pnt(0,0,-80),gp_Pnt(90,20,30)); \n\
3008 BRepBuilderAPI_MakeWire MW1(ExistingWire,Edge3); \n\
3009 if (MW1.IsDone()) { \n\
3010 YellowWire = MW1; \n\
3013 ///the white wire is built with an existing wire and 3 edges. \n\
3014 ///we use the methods Add, Edge and Vertex from BRepBuilderAPI_MakeWire \n\
3015 ///in order to display the last edge and the last vertices we \n\
3016 ///add to the wire. \n\
3018 gp_Circ circle2(gp_Ax2(gp_Pnt(0,0,0),gp_Dir(0,1,0)),200); \n\
3019 Edge4 = BRepBuilderAPI_MakeEdge(circle2,0,PI); \n\
3021 ExistingWire2 = BRepBuilderAPI_MakeWire(Edge4); \n\
3023 gp_Pnt P1(0,0,-200); \n\
3024 gp_Pnt P2(5,204,0); \n\
3025 Edge5 = BRepBuilderAPI_MakeEdge(P1,P2); \n\
3027 gp_Pnt P3(-15,20,15); \n\
3028 Edge6 = BRepBuilderAPI_MakeEdge(P2,P3); \n\
3029 gp_Pnt P4(15,20,0); \n\
3030 Edge7 = BRepBuilderAPI_MakeEdge(P3,P4); \n\
3032 BRepBuilderAPI_MakeWire MW; \n\
3033 MW.Add(ExistingWire2); \n\
3038 if (MW.IsDone()) { \n\
3039 WhiteWire = MW.Wire(); \n\
3040 LastEdge = MW.Edge(); \n\
3041 LastVertex = MW.Vertex(); \n\
3046 PocessTextInDialog("Make wire ", Message);
3049 void CModelingDoc::OnFace()
3051 AIS_ListOfInteractive aList;
3052 myAISContext->DisplayedObjects(aList);
3053 AIS_ListIteratorOfListOfInteractive aListIterator;
3054 for(aListIterator.Initialize(aList);aListIterator.More();aListIterator.Next()){
3055 myAISContext->Remove (aListIterator.Value(), Standard_False);
3060 TopoDS_Face WhiteFace, BrownFace, RedFace, PinkFace;
3061 TopoDS_Edge Edge1, Edge2, Edge3, Edge4, Edge5, Edge6, Edge7;
3063 gp_Pnt P1, P2, P3, P4, P5, P6, P7;
3065 gp_Sphere sphere (gp_Ax3(gp_Pnt(0,0,0),gp_Dir(1,0,0)),150);
3067 WhiteFace = BRepBuilderAPI_MakeFace(sphere,0.1,0.7,0.2,0.9);
3069 //////////////////////////////////
3071 P1.SetCoord(-15,200,10);
3072 P2.SetCoord(5,204,0);
3073 P3.SetCoord(15,200,0);
3074 P4.SetCoord(-15,20,15);
3075 P5.SetCoord(-5,20,0);
3076 P6.SetCoord(15,20,35);
3077 TColgp_Array2OfPnt array(1,3,1,2);
3078 array.SetValue(1,1,P1);
3079 array.SetValue(2,1,P2);
3080 array.SetValue(3,1,P3);
3081 array.SetValue(1,2,P4);
3082 array.SetValue(2,2,P5);
3083 array.SetValue(3,2,P6);
3084 Handle (Geom_BSplineSurface) curve = GeomAPI_PointsToBSplineSurface(array,3,8,GeomAbs_C2,0.001);
3086 RedFace = BRepBuilderAPI_MakeFace(curve, Precision::Confusion());
3088 ////////////////////
3090 gp_Circ circle(gp_Ax2(gp_Pnt(0,0,0),gp_Dir(1,0,0)),80);
3091 Edge1 = BRepBuilderAPI_MakeEdge(circle,0,M_PI);
3093 Edge2 = BRepBuilderAPI_MakeEdge(gp_Pnt(0,0,-80),gp_Pnt(0,-10,40));
3094 Edge3 = BRepBuilderAPI_MakeEdge(gp_Pnt(0,-10,40),gp_Pnt(0,0,80));
3096 TopoDS_Wire YellowWire;
3097 BRepBuilderAPI_MakeWire MW1(Edge1,Edge2,Edge3);
3102 BrownFace = BRepBuilderAPI_MakeFace(YellowWire);
3107 P1.SetCoord(35,-200,40);
3108 P2.SetCoord(50,-204,30);
3109 P3.SetCoord(65,-200,30);
3110 P4.SetCoord(35,-20,45);
3111 P5.SetCoord(45,-20,30);
3112 P6.SetCoord(65,-20,65);
3113 TColgp_Array2OfPnt array2(1,3,1,2);
3114 array2.SetValue(1,1,P1);
3115 array2.SetValue(2,1,P2);
3116 array2.SetValue(3,1,P3);
3117 array2.SetValue(1,2,P4);
3118 array2.SetValue(2,2,P5);
3119 array2.SetValue(3,2,P6);
3121 Handle (Geom_BSplineSurface) BSplineSurf = GeomAPI_PointsToBSplineSurface(array2,3,8,GeomAbs_C2,0.001);
3123 TopoDS_Face aFace = BRepBuilderAPI_MakeFace(BSplineSurf, Precision::Confusion());
3126 gp_Pnt2d P12d(0.9,0.1);
3127 gp_Pnt2d P22d(0.2,0.7);
3128 gp_Pnt2d P32d(0.02,0.1);
3130 Handle (Geom2d_Line) line1 = new Geom2d_Line(P12d,gp_Dir2d((0.2-0.9),(0.7-0.1)));
3131 Handle (Geom2d_Line) line2 = new Geom2d_Line(P22d,gp_Dir2d((0.02-0.2),(0.1-0.7)));
3132 Handle (Geom2d_Line) line3 = new Geom2d_Line(P32d,gp_Dir2d((0.9-0.02),(0.1-0.1)));
3135 //Edges are on the BSpline surface
3136 Edge1 = BRepBuilderAPI_MakeEdge(line1,BSplineSurf,0,P12d.Distance(P22d));
3137 Edge2 = BRepBuilderAPI_MakeEdge(line2,BSplineSurf,0,P22d.Distance(P32d));
3138 Edge3 = BRepBuilderAPI_MakeEdge(line3,BSplineSurf,0,P32d.Distance(P12d));
3140 Wire1 = BRepBuilderAPI_MakeWire(Edge1,Edge2,Edge3);
3142 PinkFace = BRepBuilderAPI_MakeFace(aFace,Wire1);
3143 BRepLib::BuildCurves3d(PinkFace);
3145 /////////////Display
3146 Handle(AIS_Shape) white = new AIS_Shape(WhiteFace);
3147 myAISContext->SetColor(white,Quantity_NOC_WHITE,Standard_False);
3148 myAISContext->SetMaterial(white,Graphic3d_NOM_PLASTIC,Standard_False);
3149 myAISContext->Display(white,Standard_False);
3151 Handle(AIS_Shape) red = new AIS_Shape(RedFace);
3152 myAISContext->SetColor(red,Quantity_NOC_RED,Standard_False);
3153 myAISContext->SetMaterial(red,Graphic3d_NOM_PLASTIC,Standard_False);
3154 myAISContext->Display(red,Standard_False);
3156 Handle(AIS_Shape) brown = new AIS_Shape(BrownFace);
3157 myAISContext->SetColor(brown,Quantity_NOC_BROWN,Standard_False);
3158 myAISContext->SetMaterial(brown,Graphic3d_NOM_PLASTIC,Standard_False);
3159 myAISContext->Display(brown,Standard_False);
3161 Handle(AIS_Shape) pink = new AIS_Shape(PinkFace);
3162 myAISContext->SetColor(pink,Quantity_NOC_HOTPINK,Standard_False);
3163 myAISContext->SetMaterial(pink,Graphic3d_NOM_PLASTIC,Standard_False);
3164 myAISContext->Display(pink,Standard_False);
3169 TCollection_AsciiString Message ("\
3171 TopoDS_Face WhiteFace, BrownFace, RedFace, PinkFace; \n\
3172 TopoDS_Edge Edge1, Edge2, Edge3, Edge4, Edge5, Edge6, Edge7; \n\
3173 TopoDS_Wire Wire1; \n\
3174 gp_Pnt P1, P2, P3, P4, P5, P6, P7; \n\
3176 ////////The white Face \n\
3178 gp_Sphere sphere (gp_Ax3(gp_Pnt(0,0,0),gp_Dir(1,0,0)),150); \n\
3180 WhiteFace = BRepBuilderAPI_MakeFace(sphere,0.1,0.7,0.2,0.9); \n\
3182 ////////The red face \n\
3184 P1.SetCoord(-15,200,10); \n\
3185 P2.SetCoord(5,204,0); \n\
3186 P3.SetCoord(15,200,0); \n\
3187 P4.SetCoord(-15,20,15); \n\
3188 P5.SetCoord(-5,20,0); \n\
3189 P6.SetCoord(15,20,35); \n\
3190 TColgp_Array2OfPnt array(1,3,1,2); \n\
3191 array.SetValue(1,1,P1); \n\
3192 array.SetValue(2,1,P2); \n\
3193 array.SetValue(3,1,P3); \n\
3194 array.SetValue(1,2,P4); \n\
3195 array.SetValue(2,2,P5); \n\
3196 array.SetValue(3,2,P6); \n\
3197 Handle (Geom_BSplineSurface) curve = GeomAPI_PointsToBSplineSurface(array,3,8,GeomAbs_C2,0.001); \n\
3199 RedFace = BRepBuilderAPI_MakeFace(curve); \n\
3201 ////////The brown face \n\
3203 gp_Circ circle(gp_Ax2(gp_Pnt(0,0,0),gp_Dir(1,0,0)),80); \n\
3204 Edge1 = BRepBuilderAPI_MakeEdge(circle,0,PI); \n\
3206 Edge2 = BRepBuilderAPI_MakeEdge(gp_Pnt(0,0,-80),gp_Pnt(0,-10,40)); \n\
3207 Edge3 = BRepBuilderAPI_MakeEdge(gp_Pnt(0,-10,40),gp_Pnt(0,0,80)); \n\
3209 TopoDS_Wire YellowWire; \n\
3210 BRepBuilderAPI_MakeWire MW1(Edge1,Edge2,Edge3); \n\
3211 if (MW1.IsDone()) { \n\
3212 YellowWire = MW1; \n\
3215 BrownFace = BRepBuilderAPI_MakeFace(YellowWire); \n\
3218 ////////The pink face \n\
3220 P1.SetCoord(35,-200,40); \n\
3221 P2.SetCoord(50,-204,30); \n\
3222 P3.SetCoord(65,-200,30); \n\
3223 P4.SetCoord(35,-20,45); \n\
3224 P5.SetCoord(45,-20,30); \n\
3225 P6.SetCoord(65,-20,65); \n\
3226 TColgp_Array2OfPnt array2(1,3,1,2); \n\
3227 array2.SetValue(1,1,P1); \n\
3228 array2.SetValue(2,1,P2); \n\
3229 array2.SetValue(3,1,P3); \n\
3230 array2.SetValue(1,2,P4); \n\
3231 array2.SetValue(2,2,P5); \n\
3232 array2.SetValue(3,2,P6); \n\
3234 Handle (Geom_BSplineSurface) BSplineSurf = GeomAPI_PointsToBSplineSurface(array2,3,8,GeomAbs_C2,0.001); \n\
3236 TopoDS_Face aFace = BRepBuilderAPI_MakeFace(BSplineSurf); \n\
3239 gp_Pnt2d P12d(0.9,0.1); \n\
3240 gp_Pnt2d P22d(0.2,0.7); \n\
3241 gp_Pnt2d P32d(0.02,0.1); \n\
3243 Handle (Geom2d_Line) line1= \n\
3244 new Geom2d_Line(P12d,gp_Dir2d((0.2-0.9),(0.7-0.1))); \n\
3245 Handle (Geom2d_Line) line2= \n\
3246 new Geom2d_Line(P22d,gp_Dir2d((0.02-0.2),(0.1-0.7))); \n\
3247 Handle (Geom2d_Line) line3= \n\
3248 new Geom2d_Line(P32d,gp_Dir2d((0.9-0.02),(0.1-0.1))); \n\
3250 //Edges are on the BSpline surface \n\
3251 Edge1 = BRepBuilderAPI_MakeEdge(line1,BSplineSurf,0,P12d.Distance(P22d)); \n\
3252 Edge2 = BRepBuilderAPI_MakeEdge(line2,BSplineSurf,0,P22d.Distance(P32d)); \n\
3253 Edge3 = BRepBuilderAPI_MakeEdge(line3,BSplineSurf,0,P32d.Distance(P12d)); \n\
3255 Wire1 = BRepBuilderAPI_MakeWire(Edge1,Edge2,Edge3); \n\
3256 Wire1.Reverse(); \n\
3257 PinkFace = BRepBuilderAPI_MakeFace(aFace,Wire1); \n\
3258 BRepLib::BuildCurves3d(PinkFace); \n\
3262 PocessTextInDialog("Make face ", Message);
3265 void CModelingDoc::OnShell()
3267 AIS_ListOfInteractive aList;
3268 myAISContext->DisplayedObjects(aList);
3269 AIS_ListIteratorOfListOfInteractive aListIterator;
3270 for(aListIterator.Initialize(aList);aListIterator.More();aListIterator.Next()){
3271 myAISContext->Remove (aListIterator.Value(), Standard_False);
3274 TColgp_Array2OfPnt Poles(1,2,1,4);
3275 Poles.SetValue(1,1,gp_Pnt(0,0,0));
3276 Poles.SetValue(1,2,gp_Pnt(0,10,2));
3277 Poles.SetValue(1,3,gp_Pnt(0,20,10));
3278 Poles.SetValue(1,4,gp_Pnt(0,30,0));
3279 Poles.SetValue(2,1,gp_Pnt(10,0,5));
3280 Poles.SetValue(2,2,gp_Pnt(10,10,3));
3281 Poles.SetValue(2,3,gp_Pnt(10,20,20));
3282 Poles.SetValue(2,4,gp_Pnt(10,30,0));
3284 TColStd_Array1OfReal UKnots(1,2);
3285 UKnots.SetValue(1,0);
3286 UKnots.SetValue(2,1);
3288 TColStd_Array1OfInteger UMults(1,2);
3289 UMults.SetValue(1,2);
3290 UMults.SetValue(2,2);
3292 TColStd_Array1OfReal VKnots(1,3);
3293 VKnots.SetValue(1,0);
3294 VKnots.SetValue(2,1);
3295 VKnots.SetValue(3,2);
3297 TColStd_Array1OfInteger VMults(1,3);
3298 VMults.SetValue(1,3);
3299 VMults.SetValue(2,1);
3300 VMults.SetValue(3,3);
3302 Standard_Integer UDegree(1);
3303 Standard_Integer VDegree(2);
3305 Handle (Geom_BSplineSurface) BSpline = new Geom_BSplineSurface(Poles,UKnots,VKnots,UMults,VMults,UDegree,VDegree);
3307 TopoDS_Face WhiteFace = BRepBuilderAPI_MakeFace(BSpline, Precision::Confusion());
3310 Handle(AIS_Shape) white = new AIS_Shape(WhiteFace);
3311 myAISContext->SetColor (white, Quantity_NOC_WHITE, Standard_False);
3312 myAISContext->SetMaterial(white,Graphic3d_NOM_PLASTIC,Standard_False);
3313 myAISContext->SetTransparency (white, 0.7, Standard_False);
3314 myAISContext->Display(white,Standard_False);
3317 TopoDS_Shell aShell = BRepBuilderAPI_MakeShell(BSpline);
3318 Handle(AIS_Shape) anAISShell = new AIS_Shape(aShell);
3319 myAISContext->SetDisplayMode (anAISShell, 0, Standard_False);
3320 myAISContext->Display(anAISShell,Standard_False);
3321 //myAISContext->SetSelected(anAISShell);
3325 TCollection_AsciiString Message ("\
3327 TColgp_Array2OfPnt Poles(1,2,1,4); \n\
3328 Poles.SetValue(1,1,gp_Pnt(0,0,0)); \n\
3329 Poles.SetValue(1,2,gp_Pnt(0,10,2)); \n\
3330 Poles.SetValue(1,3,gp_Pnt(0,20,10)); \n\
3331 Poles.SetValue(1,4,gp_Pnt(0,30,0)); \n\
3332 Poles.SetValue(2,1,gp_Pnt(10,0,5)); \n\
3333 Poles.SetValue(2,2,gp_Pnt(10,10,3)); \n\
3334 Poles.SetValue(2,3,gp_Pnt(10,20,20)); \n\
3335 Poles.SetValue(2,4,gp_Pnt(10,30,0)); \n\
3337 TColStd_Array1OfReal UKnots(1,2); \n\
3338 UKnots.SetValue(1,0); \n\
3339 UKnots.SetValue(2,1); \n\
3341 TColStd_Array1OfInteger UMults(1,2); \n\
3342 UMults.SetValue(1,2); \n\
3343 UMults.SetValue(2,2); \n\
3345 TColStd_Array1OfReal VKnots(1,3); \n\
3346 VKnots.SetValue(1,0); \n\
3347 VKnots.SetValue(2,1); \n\
3348 VKnots.SetValue(3,2); \n\
3350 TColStd_Array1OfInteger VMults(1,3); \n\
3351 VMults.SetValue(1,3); \n\
3352 VMults.SetValue(2,1); \n\
3353 VMults.SetValue(3,3); \n\
3355 Standard_Integer UDegree(1); \n\
3356 Standard_Integer VDegree(2); \n\
3358 Handle (Geom_BSplineSurface) BSpline = new Geom_BSplineSurface(Poles,UKnots,VKnots,UMults,VMults,UDegree,VDegree); \n\
3360 TopoDS_Shell aShell = BRepBuilderAPI_MakeShell(BSpline); \n\
3364 PocessTextInDialog("Make shell", Message);
3368 void CModelingDoc::OnCompound()
3370 AIS_ListOfInteractive aList;
3371 myAISContext->DisplayedObjects(aList);
3372 AIS_ListIteratorOfListOfInteractive aListIterator;
3373 for(aListIterator.Initialize(aList);aListIterator.More();aListIterator.Next()){
3374 myAISContext->Remove (aListIterator.Value(), Standard_False);
3377 BRep_Builder builder;
3378 TopoDS_Compound Comp;
3379 builder.MakeCompound(Comp);
3381 TopoDS_Vertex aVertex = BRepBuilderAPI_MakeVertex(gp_Pnt(-20,10,-30));
3382 builder.Add(Comp,aVertex);
3384 gp_Lin line(gp_Ax1(gp_Pnt(10,10,10),gp_Dir(1,0,0)));
3385 TopoDS_Edge anEdge = BRepBuilderAPI_MakeEdge(line,-20,10);
3386 builder.Add(Comp,anEdge);
3388 gp_Sphere sphere (gp_Ax3(gp_Pnt(-80,0,0),gp_Dir(1,0,0)),150);
3389 TopoDS_Face aFace = BRepBuilderAPI_MakeFace(sphere,0.1,0.7,0.2,0.9);
3390 builder.Add(Comp,aFace);
3392 TopoDS_Shape aBox = BRepPrimAPI_MakeBox(gp_Pnt(-60, 0, 0), 30, 60, 40).Shape();
3393 builder.Add(Comp,aBox);
3395 Handle(AIS_Shape) white = new AIS_Shape(Comp);
3396 myAISContext->SetDisplayMode (white, 0, Standard_False);
3397 myAISContext->Display(white,Standard_False);
3402 TCollection_AsciiString Message ("\
3404 BRep_Builder builder; \n\
3405 TopoDS_Compound Comp; \n\
3406 builder.MakeCompound(Comp); \n\
3408 TopoDS_Vertex aVertex = BRepBuilderAPI_MakeVertex(gp_Pnt(-20,10,-30)); \n\
3409 builder.Add(Comp,aVertex); \n\
3411 gp_Lin line(gp_Ax1(gp_Pnt(10,10,10),gp_Dir(1,0,0))); \n\
3412 TopoDS_Edge anEdge = BRepBuilderAPI_MakeEdge(line,-20,10); \n\
3413 builder.Add(Comp,anEdge); \n\
3415 gp_Sphere sphere (gp_Ax3(gp_Pnt(-80,0,0),gp_Dir(1,0,0)),150); \n\
3416 TopoDS_Face aFace = BRepBuilderAPI_MakeFace(sphere,0.1,0.7,0.2,0.9); \n\
3417 builder.Add(Comp,aFace); \n\
3419 TopoDS_Shape aBox = BRepPrimAPI_MakeBox(gp_Pnt(-60,0,0),30,60,40); \n\
3420 builder.Add(Comp,aBox); \n\
3424 PocessTextInDialog("Make compound ", Message);
3432 void CModelingDoc::OnSewing()
3434 AIS_ListOfInteractive aList;
3435 myAISContext->DisplayedObjects(aList);
3436 AIS_ListIteratorOfListOfInteractive aListIterator;
3437 for(aListIterator.Initialize(aList);aListIterator.More();aListIterator.Next()){
3438 myAISContext->Remove (aListIterator.Value(), Standard_False);
3443 Handle(Geom_Plane) Pi=new Geom_Plane(P,V);
3444 Handle(Geom_RectangularTrimmedSurface) GeometricSurface=new Geom_RectangularTrimmedSurface(Pi,0.,100.,0.,100.);
3445 TopoDS_Shape FirstShape = BRepBuilderAPI_MakeFace(GeometricSurface, Precision::Confusion());
3447 Handle(AIS_Shape) white1 = new AIS_Shape(FirstShape);
3449 myAISContext->SetColor(white1,Quantity_NOC_RED,Standard_False);
3450 myAISContext->SetMaterial(white1,Graphic3d_NOM_PLASTIC,Standard_False);
3451 myAISContext->SetTransparency(white1,0.4,Standard_False);
3452 myAISContext->Display(white1,Standard_False);
3458 gp_Pnt P4(25,12,85);
3459 gp_Pnt P5(100,0,80);
3460 gp_Pnt P6(135,-12,85);
3462 TColgp_Array2OfPnt Array(1,3,1,2);
3463 Array.SetValue(1,1,P1);
3464 Array.SetValue(2,1,P2);
3465 Array.SetValue(3,1,P3);
3466 Array.SetValue(1,2,P4);
3467 Array.SetValue(2,2,P5);
3468 Array.SetValue(3,2,P6);
3470 Handle (Geom_BSplineSurface) aSurf = GeomAPI_PointsToBSplineSurface(Array,3,8,GeomAbs_C2,0.00001);
3471 TopoDS_Shape SecondShape = BRepBuilderAPI_MakeFace(aSurf, Precision::Confusion());
3473 Handle(AIS_Shape) white2 = new AIS_Shape(SecondShape);
3475 myAISContext->SetColor(white2,Quantity_NOC_YELLOW,Standard_False);
3476 myAISContext->SetMaterial(white2,Graphic3d_NOM_PLASTIC,Standard_False);
3477 myAISContext->SetTransparency(white2,0.4,Standard_False);
3478 myAISContext->Display(white2,Standard_False);
3482 BRepOffsetAPI_Sewing aMethod;
3483 aMethod.Add(FirstShape);
3484 aMethod.Add(SecondShape);
3488 TopoDS_Shape sewedShape = aMethod.SewedShape();
3490 Handle(AIS_Shape) result = new AIS_Shape(sewedShape);
3491 myAISContext->SetDisplayMode(result,0,Standard_False);
3492 myAISContext->Display(result,Standard_False);
3496 TCollection_AsciiString Message ("\
3498 ///////The first shape \n\
3500 gp_Pnt P(0,0,0); \n\
3501 gp_Vec V(0,0,1); \n\
3502 Handle(Geom_Plane) Pi=new Geom_Plane(P,V); \n\
3503 Handle(Geom_RectangularTrimmedSurface) GeometricSurface=new Geom_RectangularTrimmedSurface(Pi,0.,100.,0.,100.); \n\
3504 TopoDS_Shape FirstShape = BRepBuilderAPI_MakeFace(GeometricSurface); \n\
3506 ///////The second shape \n\
3508 gp_Pnt P1(0,0,0); \n\
3509 gp_Pnt P2(50,0,0); \n\
3510 gp_Pnt P3(100,0,0); \n\
3511 gp_Pnt P4(25,12,85); \n\
3512 gp_Pnt P5(100,0,80); \n\
3513 gp_Pnt P6(135,-12,85); \n\
3515 TColgp_Array2OfPnt Array(1,3,1,2); \n\
3516 Array.SetValue(1,1,P1); \n\
3517 Array.SetValue(2,1,P2); \n\
3518 Array.SetValue(3,1,P3); \n\
3519 Array.SetValue(1,2,P4); \n\
3520 Array.SetValue(2,2,P5); \n\
3521 Array.SetValue(3,2,P6); \n\
3523 Handle (Geom_BSplineSurface) aSurf = GeomAPI_PointsToBSplineSurface(Array,3,8,GeomAbs_C2,0.00001); \n\
3524 TopoDS_Shape SecondShape = BRepBuilderAPI_MakeFace(aSurf); \n\
3526 BRepOffsetAPI_Sewing aMethod; \n\
3527 aMethod.Add(FirstShape); \n\
3528 aMethod.Add(SecondShape); \n\
3530 aMethod.Perform(); \n\
3532 TopoDS_Shape sewedShape = aMethod.SewedShape(); \n\
3536 PocessTextInDialog("Sew faces ", Message);
3546 void CModelingDoc::OnBuilder()
3548 AIS_ListOfInteractive aList;
3549 myAISContext->DisplayedObjects(aList);
3550 AIS_ListIteratorOfListOfInteractive aListIterator;
3551 for(aListIterator.Initialize(aList);aListIterator.More();aListIterator.Next()){
3552 myAISContext->Remove (aListIterator.Value(), Standard_False);
3555 //The tolerance is the tolerance of confusion
3556 Standard_Real precision = Precision::Confusion();
3561 //Build the vertices
3562 TopoDS_Vertex V000, V001, V010, V011, V100, V101, V110, V111;
3563 B.MakeVertex(V000,gp_Pnt(0,0,0),precision);
3564 B.MakeVertex(V001,gp_Pnt(0,0,100),precision);
3565 B.MakeVertex(V010,gp_Pnt(0,150,0),precision);
3566 B.MakeVertex(V011,gp_Pnt(0,150,100),precision);
3567 B.MakeVertex(V100,gp_Pnt(200,0,0),precision);
3568 B.MakeVertex(V101,gp_Pnt(200,0,100),precision);
3569 B.MakeVertex(V110,gp_Pnt(200,150,0),precision);
3570 B.MakeVertex(V111,gp_Pnt(200,150,100),precision);
3573 //the edges are oriented as the axis X,Y,Z
3574 TopoDS_Edge EX00, EX01, EX10, EX11;
3575 TopoDS_Edge EY00, EY01, EY10, EY11;
3576 TopoDS_Edge EZ00, EZ01, EZ10, EZ11;
3577 Handle (Geom_Line) L;
3580 L = new Geom_Line(gp_Pnt(0,0,0),gp_Dir(1,0,0));
3581 B.MakeEdge(EX00,L,precision);
3582 V000.Orientation(TopAbs_FORWARD);
3583 V100.Orientation(TopAbs_REVERSED);
3587 B.UpdateVertex(V000,0,EX00,precision);
3588 B.UpdateVertex(V100,200,EX00,precision);
3591 L = new Geom_Line(gp_Pnt(0,150,0),gp_Dir(1,0,0));
3592 B.MakeEdge(EX10,L,precision);
3593 V010.Orientation(TopAbs_FORWARD);
3594 V110.Orientation(TopAbs_REVERSED);
3598 B.UpdateVertex(V010,0,EX10,precision);
3599 B.UpdateVertex(V110,200,EX10,precision);
3602 L = new Geom_Line(gp_Pnt(0,0,0),gp_Dir(0,1,0));
3603 B.MakeEdge(EY00,L,precision);
3604 V000.Orientation(TopAbs_FORWARD);
3605 V010.Orientation(TopAbs_REVERSED);
3609 B.UpdateVertex(V000,0,EY00,precision);
3610 B.UpdateVertex(V010,150,EY00,precision);
3613 L = new Geom_Line(gp_Pnt(200,0,0),gp_Dir(0,1,0));
3614 B.MakeEdge(EY10,L,precision);
3615 V100.Orientation(TopAbs_FORWARD);
3616 V110.Orientation(TopAbs_REVERSED);
3620 B.UpdateVertex(V100,0,EY10,precision);
3621 B.UpdateVertex(V110,150,EY10,precision);
3624 L = new Geom_Line(gp_Pnt(0,0,100),gp_Dir(0,1,0));
3625 B.MakeEdge(EY01,L,precision);
3626 V001.Orientation(TopAbs_FORWARD);
3627 V011.Orientation(TopAbs_REVERSED);
3631 B.UpdateVertex(V001,0,EY01,precision);
3632 B.UpdateVertex(V011,150,EY01,precision);
3635 L = new Geom_Line(gp_Pnt(200,0,100),gp_Dir(0,1,0));
3636 B.MakeEdge(EY11,L,precision);
3637 V101.Orientation(TopAbs_FORWARD);
3638 V111.Orientation(TopAbs_REVERSED);
3642 B.UpdateVertex(V101,0,EY11,precision);
3643 B.UpdateVertex(V111,150,EY11,precision);
3646 L = new Geom_Line(gp_Pnt(0,0,0),gp_Dir(0,0,1));
3647 B.MakeEdge(EZ00,L,precision);
3648 V000.Orientation(TopAbs_FORWARD);
3649 V001.Orientation(TopAbs_REVERSED);
3653 B.UpdateVertex(V000,0,EZ00,precision);
3654 B.UpdateVertex(V001,100,EZ00,precision);
3657 L = new Geom_Line(gp_Pnt(0,150,0),gp_Dir(0,0,1));
3658 B.MakeEdge(EZ01,L,precision);
3659 V010.Orientation(TopAbs_FORWARD);
3660 V011.Orientation(TopAbs_REVERSED);
3664 B.UpdateVertex(V010,0,EZ01,precision);
3665 B.UpdateVertex(V011,100,EZ01,precision);
3668 L = new Geom_Line(gp_Pnt(200,0,0),gp_Dir(0,0,1));
3669 B.MakeEdge(EZ10,L,precision);
3670 V100.Orientation(TopAbs_FORWARD);
3671 V101.Orientation(TopAbs_REVERSED);
3675 B.UpdateVertex(V100,0,EZ10,precision);
3676 B.UpdateVertex(V101,100,EZ10,precision);
3679 L = new Geom_Line(gp_Pnt(200,150,0),gp_Dir(0,0,1));
3680 B.MakeEdge(EZ11,L,precision);
3681 V110.Orientation(TopAbs_FORWARD);
3682 V111.Orientation(TopAbs_REVERSED);
3686 B.UpdateVertex(V110,0,EZ11,precision);
3687 B.UpdateVertex(V111,100,EZ11,precision);
3691 Handle (Geom_Circle) C;
3692 //Standard_Real R = 100;
3695 C = new Geom_Circle(gp_Ax2(gp_Pnt(100,0,100),gp_Dir(0,1,0),gp_Dir(-1,0,0)),100);
3696 B.MakeEdge(EX01,C,precision);
3697 V001.Orientation(TopAbs_FORWARD);
3698 V101.Orientation(TopAbs_REVERSED);
3702 B.UpdateVertex(V001,0,EX01,precision);
3703 B.UpdateVertex(V101,M_PI,EX01,precision);
3706 C = new Geom_Circle(gp_Ax2(gp_Pnt(100,150,100),gp_Dir(0,1,0),gp_Dir(-1,0,0)),100);
3707 B.MakeEdge(EX11,C,precision);
3708 V011.Orientation(TopAbs_FORWARD);
3709 V111.Orientation(TopAbs_REVERSED);
3713 B.UpdateVertex(V011,0,EX11,precision);
3714 B.UpdateVertex(V111,M_PI,EX11,precision);
3716 //Build wire and faces
3717 //Faces normals are along the axis X,Y,Z
3718 TopoDS_Face FXMIN, FXMAX, FYMIN, FYMAX, FZMIN, FZMAX;
3720 Handle (Geom_Plane) P;
3721 Handle (Geom2d_Line) L2d;
3722 Handle (Geom2d_Circle) C2d;
3723 Handle (Geom_CylindricalSurface) S;
3726 P = new Geom_Plane(gp_Ax2(gp_Pnt(200,0,0),gp_Dir(1,0,0),gp_Dir(0,1,0)));
3727 B.MakeFace(FXMAX,P,precision);
3728 //the wire and the edges
3731 EY10.Orientation(TopAbs_FORWARD);
3734 L2d = new Geom2d_Line(gp_Pnt2d(0,0),gp_Dir2d(1,0));
3735 B.UpdateEdge(EY10,L2d,FXMAX,precision);
3737 EZ11.Orientation(TopAbs_FORWARD);
3740 L2d = new Geom2d_Line(gp_Pnt2d(150,0),gp_Dir2d(0,1));
3741 B.UpdateEdge(EZ11,L2d,FXMAX,precision);
3743 EY11.Orientation(TopAbs_REVERSED);
3746 L2d = new Geom2d_Line(gp_Pnt2d(0,100),gp_Dir2d(1,0));
3747 B.UpdateEdge(EY11,L2d,FXMAX,precision);
3749 EZ10.Orientation(TopAbs_REVERSED);
3752 L2d = new Geom2d_Line(gp_Pnt2d(0,0),gp_Dir2d(0,1));
3753 B.UpdateEdge(EZ10,L2d,FXMAX,precision);
3758 P = new Geom_Plane(gp_Ax2(gp_Pnt(0,0,0),gp_Dir(-1,0,0),gp_Dir(0,0,1)));
3759 B.MakeFace(FXMIN,P,precision);
3760 //the wire and the edges
3763 EZ00.Orientation(TopAbs_FORWARD);
3766 L2d = new Geom2d_Line(gp_Pnt2d(0,0),gp_Dir2d(1,0));
3767 B.UpdateEdge(EZ00,L2d,FXMIN,precision);
3769 EY01.Orientation(TopAbs_FORWARD);
3772 L2d = new Geom2d_Line(gp_Pnt2d(100,0),gp_Dir2d(0,1));
3773 B.UpdateEdge(EY01,L2d,FXMIN,precision);
3775 EZ01.Orientation(TopAbs_REVERSED);
3778 L2d = new Geom2d_Line(gp_Pnt2d(0,150),gp_Dir2d(1,0));
3779 B.UpdateEdge(EZ01,L2d,FXMIN,precision);
3781 EY00.Orientation(TopAbs_REVERSED);
3784 L2d = new Geom2d_Line(gp_Pnt2d(0,0),gp_Dir2d(0,1));
3785 B.UpdateEdge(EY00,L2d,FXMIN,precision);
3792 P = new Geom_Plane(gp_Ax2(gp_Pnt(0,0,0),gp_Dir(0,1,0),gp_Dir(0,0,1)));
3793 B.MakeFace(FYMAX,P,precision);
3794 //the wire and the edges
3797 EZ00.Orientation(TopAbs_FORWARD);
3800 L2d = new Geom2d_Line(gp_Pnt2d(0,0),gp_Dir2d(1,0));
3801 B.UpdateEdge(EZ00,L2d,FYMAX,precision);
3803 EX01.Orientation(TopAbs_FORWARD);
3806 C2d = new Geom2d_Circle(gp_Ax2d(gp_Pnt2d(100,100),gp_Dir2d(0,-1)),100);
3807 B.UpdateEdge(EX01,C2d,FYMAX,precision);
3808 B.UpdateVertex(V001,0,EX01,FYMAX,precision);
3809 B.UpdateVertex(V101,M_PI,EX01,FYMAX,precision);
3811 EZ10.Orientation(TopAbs_REVERSED);
3814 L2d = new Geom2d_Line(gp_Pnt2d(0,200),gp_Dir2d(1,0));
3815 B.UpdateEdge(EZ10,L2d,FYMAX,precision);
3817 EX00.Orientation(TopAbs_REVERSED);
3820 L2d = new Geom2d_Line(gp_Pnt2d(0,0),gp_Dir2d(0,1));
3821 B.UpdateEdge(EX00,L2d,FYMAX,precision);
3829 P = new Geom_Plane(gp_Ax2(gp_Pnt(0,150,0),gp_Dir(0,1,0),gp_Dir(0,0,1)));
3830 B.MakeFace(FYMIN,P,precision);
3831 //the wire and the edges
3834 EZ01.Orientation(TopAbs_FORWARD);
3837 L2d = new Geom2d_Line(gp_Pnt2d(0,0),gp_Dir2d(1,0));
3838 B.UpdateEdge(EZ01,L2d,FYMIN,precision);
3840 EX11.Orientation(TopAbs_FORWARD);
3843 C2d = new Geom2d_Circle(gp_Ax2d(gp_Pnt2d(100,100),gp_Dir2d(0,-1)),100);
3844 B.UpdateEdge(EX11,C2d,FYMIN,precision);
3845 B.UpdateVertex(V011,0,EX11,FYMIN,precision);
3846 B.UpdateVertex(V111,M_PI,EX11,FYMIN,precision);
3848 EZ11.Orientation(TopAbs_REVERSED);
3851 L2d = new Geom2d_Line(gp_Pnt2d(0,200),gp_Dir2d(1,0));
3852 B.UpdateEdge(EZ11,L2d,FYMIN,precision);
3854 EX10.Orientation(TopAbs_REVERSED);
3857 L2d = new Geom2d_Line(gp_Pnt2d(0,0),gp_Dir2d(0,1));
3858 B.UpdateEdge(EX10,L2d,FYMIN,precision);
3863 P = new Geom_Plane(gp_Ax2(gp_Pnt(0,0,0),gp_Dir(0,0,-1),gp_Dir(0,1,0)));
3864 B.MakeFace(FZMAX,P,precision);
3865 //the wire and the edges
3868 EY00.Orientation(TopAbs_FORWARD);
3871 L2d = new Geom2d_Line(gp_Pnt2d(0,0),gp_Dir2d(1,0));
3872 B.UpdateEdge(EY00,L2d,FZMAX,precision);
3874 EX10.Orientation(TopAbs_FORWARD);
3877 L2d = new Geom2d_Line(gp_Pnt2d(150,0),gp_Dir2d(0,1));
3878 B.UpdateEdge(EX10,L2d,FZMAX,precision);
3880 EY10.Orientation(TopAbs_REVERSED);
3883 L2d = new Geom2d_Line(gp_Pnt2d(0,200),gp_Dir2d(1,0));
3884 B.UpdateEdge(EY10,L2d,FZMAX,precision);
3886 EX00.Orientation(TopAbs_REVERSED);
3889 L2d = new Geom2d_Line(gp_Pnt2d(0,0),gp_Dir2d(0,1));
3890 B.UpdateEdge(EX00,L2d,FZMAX,precision);
3896 S = new Geom_CylindricalSurface(gp_Ax3(gp_Pnt(100,0,100),gp_Dir(0,1,0),gp_Dir(-1,0,0)),100);
3897 B.MakeFace(FZMIN,S,precision);
3899 //the wire and the edges
3902 EX01.Orientation(TopAbs_FORWARD);
3905 L2d = new Geom2d_Line(gp_Ax2d(gp_Pnt2d(0,0),gp_Dir2d(1,0)));
3906 B.UpdateEdge(EX01,L2d,FZMIN,precision);
3907 B.UpdateVertex(V001,0,EX01,FZMIN,precision);
3908 B.UpdateVertex(V101,M_PI,EX01,FZMIN,precision);
3910 EY11.Orientation(TopAbs_FORWARD);
3913 L2d = new Geom2d_Line(gp_Pnt2d(M_PI,0),gp_Dir2d(0,1));
3914 B.UpdateEdge(EY11,L2d,FZMIN,precision);
3916 EX11.Orientation(TopAbs_REVERSED);
3919 L2d = new Geom2d_Line(gp_Ax2d(gp_Pnt2d(0,150),gp_Dir2d(1,0)));
3920 B.UpdateEdge(EX11,L2d,FZMIN,precision);
3921 B.UpdateVertex(V111,M_PI,EX11,FZMIN,precision);
3922 B.UpdateVertex(V011,0,EX11,FZMIN,precision);
3924 EY01.Orientation(TopAbs_REVERSED);
3927 L2d = new Geom2d_Line(gp_Pnt2d(0,0),gp_Dir2d(0,1));
3928 B.UpdateEdge(EY01,L2d,FZMIN,precision);
3932 FYMAX.Orientation(TopAbs_REVERSED);
3949 Handle(AIS_Shape) borne = new AIS_Shape(Sol);
3950 myAISContext->SetDisplayMode (borne, 1, Standard_False);
3951 myAISContext->SetColor (borne, Quantity_NOC_RED, Standard_False);
3952 myAISContext->SetMaterial(borne,Graphic3d_NOM_PLASTIC,Standard_False);
3953 myAISContext->Display(borne,Standard_False);
3957 TCollection_AsciiString Message ("\
3959 //The tolerance is 0.01 \n\
3960 Standard_Real precision(0.01); \n\
3965 //Build the vertices \n\
3966 TopoDS_Vertex V000, V001, V010, V011, V100, V101, V110, V111; \n\
3967 B.MakeVertex(V000,gp_Pnt(0,0,0),precision); \n\
3968 B.MakeVertex(V001,gp_Pnt(0,0,100),precision); \n\
3969 B.MakeVertex(V010,gp_Pnt(0,150,0),precision); \n\
3970 B.MakeVertex(V011,gp_Pnt(0,150,100),precision); \n\
3971 B.MakeVertex(V100,gp_Pnt(200,0,0),precision); \n\
3972 B.MakeVertex(V101,gp_Pnt(200,0,100),precision); \n\
3973 B.MakeVertex(V110,gp_Pnt(200,150,0),precision); \n\
3974 B.MakeVertex(V111,gp_Pnt(200,150,100),precision); \n\
3976 //Build the edges \n\
3977 //the edges are oriented as the axis X,Y,Z \n\
3978 TopoDS_Edge EX00, EX01, EX10, EX11; \n\
3979 TopoDS_Edge EY00, EY01, EY10, EY11; \n\
3980 TopoDS_Edge EZ00, EZ01, EZ10, EZ11; \n\
3981 Handle (Geom_Line) L; \n\
3984 L = new Geom_Line(gp_Pnt(0,0,0),gp_Dir(1,0,0)); \n\
3985 B.MakeEdge(EX00,L,precision); \n\
3986 V000.Orientation(TopAbs_FORWARD); \n\
3987 V100.Orientation(TopAbs_REVERSED); \n\
3988 B.Add(EX00,V000); \n\
3989 B.Add(EX00,V100); \n\
3991 B.UpdateVertex(V000,0,EX00,precision); \n\
3992 B.UpdateVertex(V100,200,EX00,precision); \n\
3994 //Idem for all the linear edges... \n\
3996 //Circular Edges \n\
3997 Handle (Geom_Circle) C; \n\
3998 Standard_Real R = 100; \n\
4001 C = new Geom_Circle(gp_Ax2(gp_Pnt(100,0,100),gp_Dir(0,1,0),gp_Dir(-1,0,0)),100); \n\
4002 B.MakeEdge(EX01,C,precision); \n\
4003 V001.Orientation(TopAbs_FORWARD); \n\
4004 V101.Orientation(TopAbs_REVERSED); \n\
4005 B.Add(EX01,V001); \n\
4006 B.Add(EX01,V101); \n\
4008 B.UpdateVertex(V001,0,EX01,precision); \n\
4009 B.UpdateVertex(V101,PI,EX01,precision); \n\
4013 //Build wire and faces \n\
4014 //Faces normals are along the axis X,Y,Z \n\
4015 TopoDS_Face FXMIN, FXMAX, FYMIN, FYMAX, FZMIN, FZMAX; \n\
4017 Handle (Geom_Plane) P; \n\
4018 Handle (Geom2d_Line) L2d; \n\
4019 Handle (Geom2d_Circle) C2d; \n\
4020 Handle (Geom_CylindricalSurface) S; \n\
4023 P = new Geom_Plane(gp_Ax2(gp_Pnt(200,0,0),gp_Dir(1,0,0),gp_Dir(0,1,0))); \n\
4024 B.MakeFace(FXMAX,P,precision); \n\
4025 //the wire and the edges \n\
4026 B.MakeWire (W); \n");
4029 EY10.Orientation(TopAbs_FORWARD); \n\
4032 L2d = new Geom2d_Line(gp_Pnt2d(0,0),gp_Dir2d(1,0)); \n\
4033 B.UpdateEdge(EY10,L2d,FXMAX,precision); \n\
4035 EZ11.Orientation(TopAbs_FORWARD); \n\
4038 L2d = new Geom2d_Line(gp_Pnt2d(150,0),gp_Dir2d(0,1)); \n\
4039 B.UpdateEdge(EZ11,L2d,FXMAX,precision); \n\
4041 EY11.Orientation(TopAbs_REVERSED); \n\
4044 L2d = new Geom2d_Line(gp_Pnt2d(0,100),gp_Dir2d(1,0)); \n\
4045 B.UpdateEdge(EY11,L2d,FXMAX,precision); \n\
4047 EZ10.Orientation(TopAbs_REVERSED); \n\
4050 L2d = new Geom2d_Line(gp_Pnt2d(0,0),gp_Dir2d(0,1)); \n\
4051 B.UpdateEdge(EZ10,L2d,FXMAX,precision); \n\
4055 //Idem for other faces... \n\
4058 TopoDS_Shell Sh; \n\
4059 B.MakeShell(Sh); \n\
4060 B.Add(Sh,FXMAX); \n\
4061 B.Add(Sh,FXMIN); \n\
4062 B.Add(Sh,FYMAX); \n\
4063 B.Add(Sh,FYMIN); \n\
4064 B.Add(Sh,FZMAX); \n\
4065 B.Add(Sh,FZMIN); \n\
4068 TopoDS_Solid Sol; \n\
4069 B.MakeSolid(Sol); \n\
4074 PocessTextInDialog("Make a shape with a builder", Message);
4078 void CModelingDoc::OnGeometrie()
4080 AIS_ListOfInteractive aList;
4081 myAISContext->DisplayedObjects(aList);
4082 AIS_ListIteratorOfListOfInteractive aListIterator;
4083 for(aListIterator.Initialize(aList);aListIterator.More();aListIterator.Next()){
4084 myAISContext->Remove (aListIterator.Value(), Standard_False);
4087 //geometry of a vertex
4088 TopoDS_Vertex aVertex = BRepBuilderAPI_MakeVertex(gp_Pnt(0,120,70));
4089 gp_Pnt GeometricPoint = BRep_Tool::Pnt(aVertex);
4091 Handle(AIS_Shape) vert = new AIS_Shape(aVertex);
4092 myAISContext->Display(vert,Standard_False);
4096 //geometry of an edge
4097 TopoDS_Edge anEdge = BRepBuilderAPI_MakeEdge(gp_Pnt(100,50,250),gp_Pnt(-30,-100,-50));
4098 Handle(AIS_Shape) yellow = new AIS_Shape(anEdge);
4099 myAISContext->SetWidth(yellow,2,Standard_False);
4100 myAISContext->Display(yellow,Standard_False);
4104 TopLoc_Location location;
4105 Standard_Real first, last;
4106 Handle (Geom_Curve) aCurve = BRep_Tool::Curve(anEdge,location,first,last);
4107 TopoDS_Edge anEdgeDS = BRepBuilderAPI_MakeEdge(aCurve);
4109 Handle (Geom_Line) aLine = Handle (Geom_Line)::DownCast(aCurve);
4110 if (!aLine.IsNull()) {
4111 Handle (AIS_Line) DispLine = new AIS_Line(aLine);
4112 myAISContext->Display(DispLine,Standard_False);
4117 //geometry of a face
4118 gp_Pnt P(-20,-20,-20);
4120 Handle(Geom_Plane) Pi=new Geom_Plane(P,V);
4121 Handle(Geom_RectangularTrimmedSurface) Surface=new Geom_RectangularTrimmedSurface(Pi,0.,100.,0.,100.);
4122 TopoDS_Face RedFace = BRepBuilderAPI_MakeFace(Surface, Precision::Confusion());
4124 Handle(AIS_Shape) red = new AIS_Shape(RedFace);
4125 myAISContext->SetColor(red,Quantity_NOC_RED,Standard_False);
4126 myAISContext->SetMaterial(red,Graphic3d_NOM_PLASTIC,Standard_False);
4127 myAISContext->Display(red,Standard_False);
4131 TopLoc_Location location2;
4132 Handle (Geom_Surface) aGeometricSurface = BRep_Tool::Surface(RedFace,location2);
4134 Handle (Geom_Plane) aPlane = Handle (Geom_Plane)::DownCast(aGeometricSurface);
4135 if (!aPlane.IsNull()) {
4136 Handle (AIS_Plane) DispPlane = new AIS_Plane(aPlane);
4137 myAISContext->Display(DispPlane,Standard_False);
4146 TCollection_AsciiString Message ("\
4148 ///////geometry of a vertex \n\
4149 TopoDS_Vertex aVertex = BRepBuilderAPI_MakeVertex(gp_Pnt(0,120,70)); \n\
4150 gp_Pnt GeometricPoint = BRep_Tool::Pnt(aVertex); \n\
4152 ///////geometry of an edge \n\
4153 TopoDS_Edge anEdge = BRepBuilderAPI_MakeEdge(gp_Pnt(100,50,250),gp_Pnt(-30,-100,-50)); \n\
4155 TopLoc_Location location; \n\
4156 Standard_Real first, last; \n\
4157 Handle (Geom_Curve) aCurve = BRep_Tool::Curve(anEdge,location,first,last); \n\
4158 TopoDS_Edge anEdgeDS = BRepBuilderAPI_MakeEdge(aCurve); \n\
4160 Handle (Geom_Line) aLine = Handle (Geom_Line)::DownCast(aCurve); \n\
4161 if (!aLine.IsNull()) { \n\
4162 Handle (AIS_Line) DispLine = new AIS_Line(aLine); \n\
4165 ///////geometry of a face \n\
4166 gp_Pnt P(-20,-20,-20); \n\
4167 gp_Vec V(0,0,1); \n\
4168 Handle(Geom_Plane) Pi=new Geom_Plane(P,V); \n\
4169 Handle(Geom_RectangularTrimmedSurface) Surface=new Geom_RectangularTrimmedSurface(Pi,0.,100.,0.,100.); \n\
4170 TopoDS_Face RedFace = BRepBuilderAPI_MakeFace(Surface); \n\
4172 TopLoc_Location location2; \n\
4173 Handle (Geom_Surface) aGeometricSurface = BRep_Tool::Surface(RedFace,location2); \n\
4175 Handle (Geom_Plane) aPlane = Handle (Geom_Plane)::DownCast(aGeometricSurface); \n\
4176 if (!aPlane.IsNull()) { \n\
4177 Handle (AIS_Plane) DispPlane = new AIS_Plane(aPlane); \n\
4182 PocessTextInDialog("Recover the geometry of vertex, edge and face ", Message);
4187 void CModelingDoc::OnExplorer()
4189 myAISContext->RemoveAll (false);
4191 TopoDS_Shape aBox = BRepPrimAPI_MakeBox(100, 100, 100).Shape();
4192 Standard_Integer j(8);
4193 Handle(AIS_ColoredShape) theBox = new AIS_ColoredShape(aBox);
4194 myAISContext->SetColor(theBox,Quantity_NOC_RED,Standard_False);
4195 myAISContext->SetMaterial(theBox,Graphic3d_NOM_PLASTIC,Standard_False);
4196 myAISContext->Display(theBox, AIS_Shaded, 0,Standard_False);
4200 for (TopExp_Explorer exp (aBox,TopAbs_FACE);exp.More();exp.Next())
4202 TopoDS_Face aCurrentFace = TopoDS::Face(exp.Current());
4204 Handle(AIS_ColoredDrawer) aSubFaceAspects = theBox->CustomAspects (aCurrentFace);
4205 aSubFaceAspects->SetShadingAspect (new Prs3d_ShadingAspect());
4206 *aSubFaceAspects->ShadingAspect()->Aspect() = *theBox->Attributes()->ShadingAspect()->Aspect();
4207 aSubFaceAspects->ShadingAspect()->Aspect()->ChangeFrontMaterial().SetTransparency (0.8f);
4208 myAISContext->Redisplay (theBox, false);
4211 //test the orientation of the current face
4212 TopAbs_Orientation orient = aCurrentFace.Orientation();
4214 //Recover the geometric plane
4215 TopLoc_Location location;
4216 Handle (Geom_Surface) aGeometricSurface = BRep_Tool::Surface(aCurrentFace,location);
4218 Handle (Geom_Plane) aPlane = Handle (Geom_Plane)::DownCast(aGeometricSurface);
4220 //Build an AIS_Shape with a new color
4221 Handle(AIS_Shape) theMovingFace = new AIS_Shape(aCurrentFace);
4222 Quantity_NameOfColor aCurrentColor = (Quantity_NameOfColor)j;
4223 myAISContext->SetColor(theMovingFace,aCurrentColor,Standard_False);
4224 myAISContext->SetMaterial(theMovingFace,Graphic3d_NOM_PLASTIC,Standard_False);
4225 //Find the normal vector of each face
4226 gp_Pln agpPlane = aPlane->Pln();
4227 gp_Ax1 norm = agpPlane.Axis();
4228 gp_Dir dir = norm.Direction();
4231 TopLoc_Location aLocation;
4232 Handle (AIS_ConnectedInteractive) theTransformedDisplay = new AIS_ConnectedInteractive();
4233 theTransformedDisplay->Connect(theMovingFace, aLocation);
4235 Handle (Geom_Transformation) theMove = new Geom_Transformation(aLocation.Transformation());
4236 myAISContext->Display(theTransformedDisplay,Standard_False);
4237 myAISContext->UpdateCurrentViewer();
4240 for (Standard_Integer i=1;i<=30;i++)
4242 theMove->SetTranslation(move*i);
4243 if (orient==TopAbs_FORWARD) myAISContext->SetLocation(theTransformedDisplay,TopLoc_Location(theMove->Trsf()));
4244 else myAISContext->SetLocation(theTransformedDisplay,TopLoc_Location(theMove->Inverted()->Trsf()));
4246 myAISContext->Redisplay(theTransformedDisplay,true);
4251 myAISContext->UpdateCurrentViewer();
4254 TCollection_AsciiString Message ("\
4256 TopoDS_Shape aBox = BRepPrimAPI_MakeBox(100,100,100); \n\
4258 for (TopExp_Explorer exp (aBox,TopAbs_FACE);exp.More();exp.Next()) { \n\
4259 TopoDS_Face aCurrentFace = TopoDS::Face(exp.Current()); \n\
4261 //Recover the geometric plane \n\
4262 TopLoc_Location location; \n\
4263 Handle (Geom_Surface) aGeometricSurface = BRep_Tool::Surface(aCurrentFace,location); \n\
4265 Handle (Geom_Plane) aPlane = Handle (Geom_Plane)::DownCast(aGeometricSurface); \n\
4268 PocessTextInDialog("Explode a shape in faces ", Message);
4272 /* =================================================================================
4273 ==================== A N A L Y S I S ========================================
4274 ================================================================================= */
4276 void CModelingDoc::OnValid()
4278 AIS_ListOfInteractive aList;
4279 myAISContext->DisplayedObjects(aList);
4280 AIS_ListIteratorOfListOfInteractive aListIterator;
4281 for(aListIterator.Initialize(aList);aListIterator.More();aListIterator.Next()){
4282 myAISContext->Remove (aListIterator.Value(), Standard_False);
4285 TopoDS_Shape S = BRepPrimAPI_MakeBox(200., 300., 150.).Shape();
4286 Handle(AIS_Shape) ais1 = new AIS_Shape(S);
4287 myAISContext->SetColor(ais1,Quantity_NOC_GREEN,Standard_False);
4288 myAISContext->SetMaterial(ais1,Graphic3d_NOM_PLASTIC,Standard_False);
4289 myAISContext->Display(ais1,Standard_False);
4292 TCollection_AsciiString Message ("\
4294 TopoDS_Shape S = BRepPrimI_MakeBox(200.,300.,150.);\n\
4295 Standard_Boolean theShapeIsValid = BRepAlgo::IsValid(S);\n\
4296 if ( theShapeIsValid )\n\
4298 MessageBox(\"The Shape Is Valid !! \",\"Checking Shape\");\n\
4302 MessageBox(\"The Shape Is NOT Valid !! \",\"Checking Shape\");\n\
4305 PocessTextInDialog("Check a shape", Message);
4307 Standard_Boolean theShapeIsValid = BRepAlgo::IsValid(S);
4308 MessageBoxW (AfxGetApp()->m_pMainWnd->m_hWnd, theShapeIsValid ? L"The Shape Is Valid !! " : L"The Shape Is NOT Valid !! ", L"Checking Shape", MB_OK);
4312 void CModelingDoc::OnLinear()
4314 AIS_ListOfInteractive aList;
4315 myAISContext->DisplayedObjects(aList);
4316 AIS_ListIteratorOfListOfInteractive aListIterator;
4317 for(aListIterator.Initialize(aList);aListIterator.More();aListIterator.Next()){
4318 myAISContext->Remove (aListIterator.Value(), Standard_False);
4322 TColgp_Array1OfPnt Points1(1,4);
4323 Points1.SetValue(1,gp_Pnt(0,0,0));
4324 Points1.SetValue(2,gp_Pnt(2,1,0));
4325 Points1.SetValue(3,gp_Pnt(4,0,0));
4326 Points1.SetValue(4,gp_Pnt(6,2,0));
4327 GeomAPI_PointsToBSpline PTBS1(Points1);
4328 Handle(Geom_BSplineCurve) BSC1 = PTBS1.Curve();
4329 TopoDS_Edge S = BRepBuilderAPI_MakeEdge(BSC1).Edge();
4331 Handle(AIS_Shape) ais1 = new AIS_Shape(S);
4332 myAISContext->SetColor(ais1,Quantity_NOC_GREEN,Standard_False);
4333 myAISContext->SetMaterial(ais1,Graphic3d_NOM_PLASTIC,Standard_False);
4334 myAISContext->Display(ais1,Standard_False);
4338 GProp_GProps System;
4339 BRepGProp::LinearProperties(S,System);
4340 gp_Pnt G = System.CentreOfMass ();
4341 Standard_Real Length = System.Mass();
4342 gp_Mat I = System.MatrixOfInertia();
4344 TCollection_ExtendedString string("Length Of all the Edges =");
4345 TCollection_ExtendedString string1(Length);
4348 string += "\nCenterOfMass : \n X=";
4359 string += "Matrix of Inertia :\n ";
4388 TCollection_AsciiString Message ("\
4390 TColgp_Array1OfPnt Points1(1,4);\n\
4391 Points1.SetValue(1,gp_Pnt(0,0,0));\n\
4392 Points1.SetValue(2,gp_Pnt(2,1,0));\n\
4393 Points1.SetValue(3,gp_Pnt(4,0,0));\n\
4394 Points1.SetValue(4,gp_Pnt(6,2,0));\n\
4395 GeomAPI_PointsToBSpline PTBS1(Points1);\n\
4396 Handle(Geom_BSplineCurve) BSC1 = PTBS1.Curve();\n\
4397 TopoDS_Shape S = BRepBuilderAPI_MakeEdge(BSC1).Edge();\n\
4398 GProp_GProps System;\n\
4399 BRepGProp::LinearProperties(S,System);\n\
4400 gp_Pnt G = System.CentreOfMass ();\n\
4401 Standard_Real Length = System.Mass();\n\
4402 gp_Mat I = System.MatrixOfInertia();\n\
4404 PocessTextInDialog("Linear Properties", Message);
4405 MessageBoxW (AfxGetApp()->m_pMainWnd->m_hWnd, string.ToWideString(), L"Linear Properties", MB_OK);
4408 void CModelingDoc::OnSurface()
4410 AIS_ListOfInteractive aList;
4411 myAISContext->DisplayedObjects(aList);
4412 AIS_ListIteratorOfListOfInteractive aListIterator;
4413 for(aListIterator.Initialize(aList);aListIterator.More();aListIterator.Next()){
4414 myAISContext->Remove (aListIterator.Value(), Standard_False);
4417 TColgp_Array1OfPnt Pnts1(1,3);
4418 TColgp_Array1OfPnt Pnts2(1,3);
4419 TColgp_Array1OfPnt Pnts3(1,3);
4420 TColgp_Array1OfPnt Pnts4(1,3);
4422 Pnts1(1) = gp_Pnt(0,0,0);
4423 Pnts1(2) = gp_Pnt(5,0,0);
4424 Pnts1(3) = gp_Pnt(10,10,0);
4426 Pnts2(1) = gp_Pnt(10,10,0);
4427 Pnts2(2) = gp_Pnt(5,12,4);
4428 Pnts2(3) = gp_Pnt(0,15,10);
4430 Pnts3(1) = gp_Pnt(0,15,10);
4431 Pnts3(2) = gp_Pnt(-12,10,11);
4432 Pnts3(3) = gp_Pnt(-10,5,13);
4434 Pnts4(1) = gp_Pnt(-10,5,13);
4435 Pnts4(2) = gp_Pnt(-2,-2,2);
4436 Pnts4(3) = gp_Pnt(0,0,0);
4438 GeomAPI_PointsToBSpline PTBS1(Pnts1);
4439 GeomAPI_PointsToBSpline PTBS2(Pnts2);
4440 GeomAPI_PointsToBSpline PTBS3(Pnts3);
4441 GeomAPI_PointsToBSpline PTBS4(Pnts4);
4442 Handle(Geom_BSplineCurve) C1 = PTBS1.Curve();
4443 Handle(Geom_BSplineCurve) C2 = PTBS2.Curve();
4444 Handle(Geom_BSplineCurve) C3 = PTBS3.Curve();
4445 Handle(Geom_BSplineCurve) C4 = PTBS4.Curve();
4447 GeomFill_BSplineCurves fill;
4448 fill.Init(C1,C2,C3,C4,GeomFill_CoonsStyle);
4449 Handle(Geom_BSplineSurface) BSS = fill.Surface();
4451 TopoDS_Shape S = BRepBuilderAPI_MakeFace(BSS, Precision::Confusion()).Face();
4453 Handle(AIS_Shape) ais1 = new AIS_Shape(S);
4454 myAISContext->SetColor(ais1,Quantity_NOC_GREEN,Standard_False);
4455 myAISContext->SetMaterial(ais1,Graphic3d_NOM_PLASTIC,Standard_False);
4456 myAISContext->Display(ais1,Standard_False);
4460 GProp_GProps System;
4461 BRepGProp::SurfaceProperties(S,System);
4462 gp_Pnt G = System.CentreOfMass ();
4463 Standard_Real Area = System.Mass();
4464 gp_Mat I = System.MatrixOfInertia();
4466 TCollection_ExtendedString string("Area Of the Face =");
4467 TCollection_ExtendedString string1(Area);
4470 string += "\nCenterOfMass : \n X=";
4481 string += "Matrix of Inertia :\n ";
4510 TCollection_AsciiString Message ("\
4512 TopoDS_Shape S = BRepBuilderAPI_MakeFace(BSplineSurf).Face();\n\
4513 GProp_GProps System;\n\
4514 BRepGProp::SurfaceProperties(S,System);\n\
4515 gp_Pnt G = System.CentreOfMass ();\n\
4516 Standard_Real Area = System.Mass();\n\
4517 gp_Mat I = System.MatrixOfInertia();\n\
4519 PocessTextInDialog("Surface Properties", Message);
4520 MessageBoxW (AfxGetApp()->m_pMainWnd->m_hWnd, string.ToWideString(), L"Surface Properties", MB_OK);
4524 void CModelingDoc::OnVolume()
4526 AIS_ListOfInteractive aList;
4527 myAISContext->DisplayedObjects(aList);
4528 AIS_ListIteratorOfListOfInteractive aListIterator;
4529 for(aListIterator.Initialize(aList);aListIterator.More();aListIterator.Next()){
4530 myAISContext->Remove (aListIterator.Value(), Standard_False);
4534 TopoDS_Shape S = BRepPrimAPI_MakeWedge(60.,100.,80.,20.).Shape();
4535 Handle(AIS_Shape) ais1 = new AIS_Shape(S);
4536 myAISContext->SetColor(ais1,Quantity_NOC_GREEN,Standard_False);
4537 myAISContext->SetMaterial(ais1,Graphic3d_NOM_PLASTIC,Standard_False);
4538 myAISContext->Display(ais1,Standard_False);
4542 GProp_GProps System;
4543 BRepGProp::VolumeProperties(S,System);
4544 gp_Pnt G = System.CentreOfMass ();
4545 Standard_Real Volume = System.Mass();
4546 gp_Mat I = System.MatrixOfInertia();
4548 TCollection_ExtendedString string("Volume Of all the Shape =");
4549 TCollection_ExtendedString string1(Volume);
4552 string += "\nCenterOfMass : \n X=";
4563 string += "Matrix of Inertia :\n ";
4592 TCollection_AsciiString Message ("\
4594 TopoDS_Shape S = BRepBuilderAPI_MakeWedge(60.,100.,80.,20.);;\n\
4595 GProp_GProps System;\n\
4596 BRepGProp::VolumeProperties(S,System);\n\
4597 gp_Pnt G = System.CentreOfMass ();\n\
4598 Standard_Real Volume = System.Mass();\n\
4599 gp_Mat I = System.MatrixOfInertia();\n\
4601 PocessTextInDialog("Volume Properties", Message);
4602 MessageBoxW (AfxGetApp()->m_pMainWnd->m_hWnd, string.ToWideString(), L"Volume Properties", MB_OK);
4606 void CModelingDoc::OnButtonFill()
4608 // TODO: Add your command handler code here
4609 myAISContext->InitSelected();
4610 if (myAISContext->MoreSelected()) {
4611 AIS1 = Handle(AIS_Shape)::DownCast(myAISContext->SelectedInteractive());
4612 myAISContext->Unhilight (AIS1, Standard_True);
4613 myAISContext->Activate(AIS1,2);
4614 myState = SELECT_EDGE_PLATE;
4615 ((OCC_MainFrame*)AfxGetMainWnd())->SetStatusMessage("Select hole contour edges and then press right mouse button"); }
4617 AIS_ListOfInteractive LI;
4618 myAISContext->DisplayedObjects(LI);
4620 if(OnFileImportBrep_WithInitDir (L"HoleFilling") == 1)
4622 myAISContext->DisplayedObjects(LI);
4623 myAISContext->SetSelected(LI.First(), Standard_True);
4627 AfxMessageBox (L"Select a shape before!");
4631 void CModelingDoc::OnStopStop()
4633 // TODO: Add your command handler code here
4635 if (myState == SELECT_EDGE_PLATE ) {
4636 Standard_Integer nbedges = 0;
4637 for (myAISContext->InitSelected(); myAISContext->MoreSelected();
4638 myAISContext->NextSelected()) {
4642 Handle(GeomPlate_HArray1OfHCurve) Fronts =
4643 new GeomPlate_HArray1OfHCurve(1, nbedges);
4644 Handle(TColStd_HArray1OfInteger) Tang =
4645 new TColStd_HArray1OfInteger(1,nbedges);
4646 Handle(TColStd_HArray1OfInteger) NbPtsCur =
4647 new TColStd_HArray1OfInteger(1,nbedges);
4648 Standard_Integer i = 0;
4649 TopoDS_Shape S1 = AIS1->Shape();
4650 TopTools_IndexedDataMapOfShapeListOfShape M;
4651 TopExp::MapShapesAndAncestors(S1, TopAbs_EDGE, TopAbs_FACE, M);
4653 for (myAISContext->InitSelected(); myAISContext->MoreSelected();myAISContext->NextSelected()) {
4655 Tang->SetValue(i,1);
4656 NbPtsCur->SetValue(i,10);
4657 TopoDS_Edge E = TopoDS::Edge(myAISContext->SelectedShape());
4658 TopoDS_Face F = TopoDS::Face(M.FindFromKey(E).First());
4660 BRepAdaptor_Surface S(F);
4661 GeomAdaptor_Surface aGAS = S.Surface();
4662 Handle(GeomAdaptor_Surface) aHGAS = new GeomAdaptor_Surface(aGAS);
4664 Handle(BRepAdaptor_Curve2d) C = new BRepAdaptor_Curve2d();
4667 Adaptor3d_CurveOnSurface ConS(C,aHGAS);
4669 Handle (Adaptor3d_CurveOnSurface) HConS = new Adaptor3d_CurveOnSurface(ConS);
4670 Fronts->SetValue(i,HConS);
4672 GeomPlate_BuildPlateSurface abuildplate(NbPtsCur,Fronts,Tang,3);
4673 abuildplate.Perform();
4674 if (!abuildplate.IsDone()){ // New in 2.0
4675 MessageBoxW (AfxGetApp()->m_pMainWnd->m_hWnd, L"Error : Build plate not valid!", L"CasCade Error", MB_ICONERROR);
4678 Handle(GeomPlate_Surface) aplate = abuildplate.Surface();
4680 GeomPlate_MakeApprox aMKS(aplate, Precision::Approximation(), 4, 7, 0.001, 1);
4681 Handle(Geom_BSplineSurface) support = aMKS.Surface();
4682 BRepBuilderAPI_MakeWire MW;
4683 TopTools_Array1OfShape tab(1,nbedges);
4684 for (i=1 ; i<=nbedges ; i++) {
4685 if (abuildplate.Sense()->Value(abuildplate.Order()->Value(i))==1) {
4686 BRepBuilderAPI_MakeEdge ME(abuildplate.Curves2d()->Value(abuildplate.Order()->Value(i)),
4688 Fronts->Value(abuildplate.Order()->Value(i))->LastParameter(),
4689 Fronts->Value(abuildplate.Order()->Value(i))->FirstParameter());
4690 TopoDS_Edge E = ME.Edge();
4691 BRepLib::BuildCurves3d(E);
4692 tab(abuildplate.Order()->Value(i)) = E;
4696 BRepBuilderAPI_MakeEdge ME(abuildplate.Curves2d()->Value(abuildplate.Order()->Value(i)),
4698 Fronts->Value(abuildplate.Order()->Value(i))->FirstParameter(),
4699 Fronts->Value(abuildplate.Order()->Value(i))->LastParameter());
4700 TopoDS_Edge E = ME.Edge();
4701 BRepLib::BuildCurves3d(E);
4702 tab(abuildplate.Order()->Value(i)) = E;
4705 for (i=1 ; i<=nbedges ; i++)
4706 MW.Add(TopoDS::Edge(tab(i)));
4712 catch(StdFail_NotDone)
4714 AfxMessageBox (L"Can't build wire!");
4719 AfxMessageBox (L"Wire is not closed!");
4721 //throw Standard_Failure("Wire is not closed");
4724 BRepBuilderAPI_MakeFace MF(support,W,Standard_True);
4727 BRepTopAdaptor_FClass2d clas2d(aface,Precision::Confusion());
4728 if (clas2d.PerformInfinitePoint() == TopAbs_IN) {
4730 BRepBuilderAPI_MakeFace MF1(support,W,Standard_True);
4733 if (!BRepAlgo::IsValid(aface))
4734 MessageBoxW (AfxGetApp()->m_pMainWnd->m_hWnd, L"Error : The plate face is not valid!", L"CasCade Error", MB_ICONERROR);
4736 Handle(AIS_Shape) anAISShape = new AIS_Shape(aface);
4737 myAISContext->SetColor (anAISShape,Quantity_NOC_AZURE, Standard_False);
4738 myAISContext->SetMaterial (anAISShape, Graphic3d_NOM_SILVER, Standard_False);
4739 myAISContext->SetDisplayMode (anAISShape, 1, Standard_False);
4740 myAISContext->Display (anAISShape, Standard_True);
4744 void CModelingDoc::OnFillwithtang()
4746 static BOOL flag = 0;
4749 Handle(AIS_InteractiveObject) aObject;
4750 myAISContext ->InitSelected();
4751 if(myAISContext->MoreSelected())
4752 aObject = myAISContext->SelectedInteractive();
4753 ((OCC_MainFrame*)AfxGetMainWnd())->SetStatusMessage("Select a file with second face");
4754 if(OnFileImportBrep_WithInitDir (L"TangentSurface") == 1){
4755 ((OCC_MainFrame*)AfxGetMainWnd())->SetStatusMessage("");
4756 AIS_ListOfInteractive aList;
4757 myAISContext->DisplayedObjects(aList);
4758 AIS_ListIteratorOfListOfInteractive aListIterator;
4759 for(aListIterator.Initialize(aList);aListIterator.More();aListIterator.Next()){
4760 myAISContext->Remove (aListIterator.Value(), Standard_False);
4762 myAISContext->UpdateCurrentViewer();
4765 myAISContext->SetSelected(aObject, Standard_True);
4768 myAISContext->InitSelected();
4769 if (myAISContext->MoreSelected()) {
4770 Handle(AIS_Shape) ashape = Handle(AIS_Shape)::DownCast(myAISContext->SelectedInteractive());
4772 THE_F1 = TopoDS::Face(ashape->Shape());
4774 catch(Standard_Failure){}
4775 if (THE_F1.IsNull())
4777 AfxMessageBox (L"Current object is not a face!\n\
4778 Please, select a face to continue\nthe creation of a tangent surface.");
4781 myAISContext->Activate(ashape,2);
4782 myState = SELECT_EDGE_PLATE_TGTES_1;
4784 ((OCC_MainFrame*)AfxGetMainWnd())->SetStatusMessage("Select an edge on the first face");
4787 AIS_ListOfInteractive LI;
4788 myAISContext->DisplayedObjects(LI);
4790 ((OCC_MainFrame*)AfxGetMainWnd())->SetStatusMessage("Select a file with first face");
4791 if(OnFileImportBrep_WithInitDir (L"TangentSurface") == 1){
4792 ((OCC_MainFrame*)AfxGetMainWnd())->SetStatusMessage("");
4793 AIS_ListOfInteractive aList;
4794 myAISContext->DisplayedObjects(aList);
4795 AIS_ListIteratorOfListOfInteractive aListIterator;
4796 for(aListIterator.Initialize(aList);aListIterator.More();aListIterator.Next()){
4797 myAISContext->Remove(aListIterator.Value(), Standard_False);
4799 myAISContext->UpdateCurrentViewer();
4802 ((OCC_MainFrame*)AfxGetMainWnd())->SetStatusMessage("");
4803 myAISContext->DisplayedObjects(LI);
4804 myAISContext->SetSelected (LI.First(), Standard_True);
4810 AfxMessageBox (L"Select a face before");
4814 void CModelingDoc::InputEvent(const Standard_Integer /*x*/,
4815 const Standard_Integer /*y*/,
4816 const Handle(V3d_View)& /*aView*/)
4818 myAISContext->SelectDetected();
4819 myAISContext->UpdateCurrentViewer();
4821 if (myState == SELECT_EDGE_PLATE_TGTES_1) {
4822 myAISContext->InitSelected();
4823 if (myAISContext->MoreSelected()) {
4824 THE_E1 = TopoDS::Edge(myAISContext->SelectedShape());
4825 myState = SELECT_EDGE_PLATE_TGTES_2;
4827 AIS_ListOfInteractive aLI;
4828 myAISContext->DisplayedObjects(aLI);
4829 if(aLI.Extent() == 2){
4830 myState = SELECT_EDGE_PLATE_TGTES_2;
4831 if (myAISContext->IsSelected(aLI.First()))
4832 myAISContext->SetSelected (aLI.Last(), Standard_True);
4834 myAISContext->SetSelected (aLI.First(), Standard_True);
4835 myAISContext->InitSelected();
4836 Handle(AIS_Shape) ashape = Handle(AIS_Shape)::DownCast(myAISContext->SelectedInteractive());
4837 THE_F2 = TopoDS::Face(ashape->Shape());
4838 myAISContext->Activate(ashape,2);
4839 myState = SELECT_EDGE_PLATE_TGTES_3;
4840 ((OCC_MainFrame*)AfxGetMainWnd())->SetStatusMessage("Select an edge on the second face");
4844 ((OCC_MainFrame*)AfxGetMainWnd())->SetStatusMessage("Select second face");
4845 AIS_ListOfInteractive LI;
4846 myAISContext->DisplayedObjects(LI);
4847 if(LI.Extent() == 1){
4848 if(OnFileImportBrep_WithInitDir (L"TangentSurface") == 1)
4853 AfxMessageBox (L"Select an edge on the face!");
4856 else if (myState == SELECT_EDGE_PLATE_TGTES_2) {
4857 myAISContext->InitSelected();
4858 if (myAISContext->MoreSelected()) {
4859 Handle(AIS_Shape) ashape = Handle(AIS_Shape)::DownCast(myAISContext->SelectedInteractive());
4860 THE_F2 = TopoDS::Face(ashape->Shape());
4861 myAISContext->Activate(ashape,2);
4862 myState = SELECT_EDGE_PLATE_TGTES_3;
4863 ((OCC_MainFrame*)AfxGetMainWnd())->SetStatusMessage("Select an edge on the second face");
4866 AfxMessageBox (L"Select the second face!");
4868 else if (myState == SELECT_EDGE_PLATE_TGTES_3) {
4869 myAISContext->InitSelected();
4870 if (myAISContext->MoreSelected()) {
4871 THE_E2 = TopoDS::Edge(myAISContext->SelectedShape());
4873 Standard_Integer i, nbPntsOnFaces=10;
4874 Standard_Real u,First, Last, Delta, Tol=0.001, TolProj;
4880 //get the pcurve, curve and surface
4881 BRepAdaptor_Curve Curve3d1(THE_E1), Curve3d2(THE_E2);
4882 BRepAdaptor_Curve2d Curve2d1(THE_E1,THE_F1), Curve2d2(THE_E2,THE_F2);
4883 BRepAdaptor_Surface Surf1(THE_F1), Surf2(THE_F2);
4885 //compute the average plane : initial surface
4886 Handle(TColgp_HArray1OfPnt) theTanPoints = new
4887 TColgp_HArray1OfPnt (1,2*nbPntsOnFaces );
4889 Delta = (Curve3d1.LastParameter()-Curve3d1.FirstParameter())/(nbPntsOnFaces-1);
4890 for (u=Curve3d1.FirstParameter(),i=1;i<=nbPntsOnFaces; i++,u+=Delta)
4891 theTanPoints->SetValue(i,Curve3d1.Value(u));
4893 Delta = (Curve3d2.LastParameter()-Curve3d2.FirstParameter())/(nbPntsOnFaces-1);
4894 for (u=Curve3d2.FirstParameter(),i=1;i<=nbPntsOnFaces; i++,u+=Delta)
4895 theTanPoints->SetValue(nbPntsOnFaces+i,Curve3d2.Value(u));
4897 //Building an initial plane
4898 GeomPlate_BuildAveragePlane aMkPlane (theTanPoints,int(Tol),1,1,1);
4899 Handle(Geom_Plane) aPlane = aMkPlane.Plane();
4900 gp_Pln aPln = aPlane->Pln();
4901 gp_XYZ aNormale = aPln.Axis().Direction().XYZ();
4902 gp_Trsf aTrsf; // to compute the U and V of the points
4903 aTrsf.SetTransformation(aPln.Position());
4905 aPlane->D1(0,0,P,W1,W2); // extract plane DU & DV
4907 // 1st surface tangencies constraints
4908 Delta = (Curve3d1.LastParameter()-Curve3d1.FirstParameter())/(nbPntsOnFaces-1);
4909 for (u=Curve3d1.FirstParameter(),i=1; i<=nbPntsOnFaces; i++,u+=Delta) {
4910 P = Curve3d1.Value(u).Transformed(aTrsf);
4911 gp_XY UV(P.X(),P.Y());
4912 aPlate.Load(Plate_PinpointConstraint(UV,aNormale*P.Z()));
4914 Surf1.D1(P2d.X(),P2d.Y(),P,V1,V2); // extract surface UV of the point
4915 aPlate.Load(Plate_GtoCConstraint(UV,
4916 Plate_D1(W1.XYZ(),W2.XYZ()),
4917 Plate_D1(V1.XYZ(),V2.XYZ())));
4920 Delta = (Curve3d2.LastParameter()-Curve3d2.FirstParameter())/(nbPntsOnFaces-1);
4921 for (u=Curve3d2.FirstParameter(),i=1; i<=nbPntsOnFaces; i++,u+=Delta) {
4922 P = Curve3d2.Value(u).Transformed(aTrsf);
4923 gp_XY UV(P.X(),P.Y());
4924 aPlate.Load(Plate_PinpointConstraint(UV,aNormale*P.Z()));
4927 Surf2.D1(P2d.X(),P2d.Y(),P,V1,V2);
4928 aPlate.Load(Plate_GtoCConstraint(UV,
4929 Plate_D1(W1.XYZ(),W2.XYZ()),
4930 Plate_D1(V1.XYZ()*-1,V2.XYZ()*-1)));
4933 ((OCC_MainFrame*)AfxGetMainWnd())->SetStatusMessage("Select a file with passing points");
4934 //Some passing points
4935 CFileDialog dlg(TRUE,
4938 OFN_HIDEREADONLY | OFN_OVERWRITEPROMPT,
4939 L"Points Files (*.pass)|*.pass; |All Files (*.*)|*.*||",
4943 initdir.GetEnvironmentVariable (L"CSF_OCCTDataPath");
4944 initdir += L"\\occ";
4946 dlg.m_ofn.lpstrInitialDir = initdir;
4948 if (dlg.DoModal() == IDOK)
4950 ((OCC_MainFrame*)AfxGetMainWnd())->SetStatusMessage("Building the tangent surface...");
4951 SetCursor(AfxGetApp()->LoadStandardCursor(IDC_WAIT));
4952 CString filename = dlg.GetPathName();
4954 std::istream in(&fic);
4955 if (!fic.open(filename, std::ios::in))
4956 MessageBoxW (AfxGetApp()->m_pMainWnd->m_hWnd, L"Error : Unable to open file", L"CasCade Error", MB_ICONERROR);
4957 Standard_Real x,y,z;
4961 while (!in.fail()|| !in.eof()){
4962 if (in >> x && in >> y && in >> z){
4963 PP = gp_Pnt(x, y, z);
4964 P = PP.Transformed(aTrsf);
4965 aPlate.Load(Plate_PinpointConstraint(gp_XY(P.X(),P.Y()),
4967 BRepBuilderAPI_MakeVertex V(PP);
4968 B.Add(C,V.Vertex());
4972 Handle(AIS_Shape) anAISCompound = new AIS_Shape(C);
4973 myAISContext->Display(anAISCompound, Standard_False);
4977 SetCursor(AfxGetApp()->LoadStandardCursor(IDC_WAIT));
4978 ((OCC_MainFrame*)AfxGetMainWnd())->SetStatusMessage("Building the tangent surface...");
4980 Standard_Integer Order = 3; // constraints continuity + 2
4981 aPlate.SolveTI(Order,1.);
4982 if (!aPlate.IsDone()){
4983 MessageBoxW (AfxGetApp()->m_pMainWnd->m_hWnd, L"Error : Build plate not valid!", L"CasCade Error", MB_ICONERROR);
4986 //Plate Surface creation
4987 Handle(GeomPlate_Surface) aPlateSurface = new GeomPlate_Surface(aPlane,aPlate);
4988 //BSplineSurface approximation
4989 GeomPlate_MakeApprox aMkSurf(aPlateSurface,Tol,1,8,0.1,1);
4990 Handle(Geom_Surface) theSurface =aMkSurf.Surface();
4992 // Face building ...
4993 Handle(Geom2d_Curve)C1,C2,C3,C4;
4994 Handle(Geom_Curve)C;
4995 C = BRep_Tool::Curve(THE_E1,First,Last);
4997 C1 = GeomProjLib::Curve2d(C,First,Last,theSurface,TolProj);
4998 TopoDS_Edge Ed1 = BRepBuilderAPI_MakeEdge(C1,theSurface).Edge();
5000 C = BRep_Tool::Curve(THE_E2,First,Last);
5002 C3 = GeomProjLib::Curve2d(C,First,Last,theSurface,TolProj);
5003 TopoDS_Edge Ed3 = BRepBuilderAPI_MakeEdge(C3,theSurface).Edge();
5005 C2 = GCE2d_MakeSegment(C1->Value(C1->FirstParameter()),
5006 C3->Value(C3->FirstParameter())).Value();
5007 TopoDS_Edge Ed2 = BRepBuilderAPI_MakeEdge(C2,theSurface).Edge();
5008 C4 = GCE2d_MakeSegment(C1->Value(C1->LastParameter()),
5009 C3->Value(C3->LastParameter())).Value();
5010 TopoDS_Edge Ed4 = BRepBuilderAPI_MakeEdge(C4,theSurface).Edge();
5013 TopoDS_Wire theWire = BRepBuilderAPI_MakeWire(Ed1,Ed2,Ed3,Ed4);
5014 TopoDS_Face theFace = BRepBuilderAPI_MakeFace(theWire);
5015 BRepLib::BuildCurves3d(theFace);
5016 if (!BRepAlgo::IsValid(theFace)){
5017 C2 = GCE2d_MakeSegment(C1->Value(C1->LastParameter()),
5018 C3->Value(C3->FirstParameter())).Value();
5019 Ed2 = BRepBuilderAPI_MakeEdge(C2,theSurface).Edge();
5020 C4 = GCE2d_MakeSegment(C3->Value(C3->LastParameter()),
5021 C1->Value(C1->FirstParameter())).Value();
5022 Ed4 = BRepBuilderAPI_MakeEdge(C4,theSurface).Edge();
5024 theWire = BRepBuilderAPI_MakeWire(Ed1,Ed2,Ed3,Ed4);
5025 theFace = BRepBuilderAPI_MakeFace(theWire);
5026 BRepLib::BuildCurves3d(theFace);
5027 if (!BRepAlgo::IsValid(theFace))
5028 MessageBoxW (AfxGetApp()->m_pMainWnd->m_hWnd, L"Error : The plate surface is not valid!!!", L"CasCade Error", MB_ICONERROR);
5031 Handle(AIS_Shape) anAISShape=new AIS_Shape(theFace);
5032 myAISContext->SetColor (anAISShape, Quantity_NOC_BLUE1, Standard_False);
5033 myAISContext->SetMaterial (anAISShape, Graphic3d_NOM_SILVER, Standard_False);
5034 myAISContext->SetDisplayMode (anAISShape, 1, Standard_False);
5035 myAISContext->Display (anAISShape, Standard_False);
5039 AfxMessageBox (L"Select an edge on the second face!");
5040 ((OCC_MainFrame*)AfxGetMainWnd())->SetStatusMessage("");
5045 void CModelingDoc::Popup(const Standard_Integer x,
5046 const Standard_Integer y ,
5047 const Handle(V3d_View)& aView)
5049 Standard_Integer PopupMenuNumber=0;
5050 myAISContext->InitSelected();
5051 if (myState == SELECT_EDGE_PLATE)
5053 else if (myAISContext->MoreSelected())
5057 VERIFY(menu.LoadMenu(IDR_Popup3D));
5058 CMenu* pPopup = menu.GetSubMenu(PopupMenuNumber);
5059 ASSERT(pPopup != NULL);
5061 if (PopupMenuNumber == 1) // more than 1 object.
5063 bool OneOrMoreInShading = false;
5064 for (myAISContext->InitSelected();myAISContext->MoreSelected ();myAISContext->NextSelected ())
5065 if (myAISContext->IsDisplayed(myAISContext->SelectedInteractive(),1)) OneOrMoreInShading=true;
5066 if(!OneOrMoreInShading)
5067 pPopup->EnableMenuItem(5, MF_BYPOSITION | MF_DISABLED | MF_GRAYED);
5071 POINT winCoord = { x , y };
5072 Handle(WNT_Window) aWNTWindow=
5073 Handle(WNT_Window)::DownCast(aView->Window());
5074 ClientToScreen ( (HWND)(aWNTWindow->HWindow()),&winCoord);
5075 pPopup->TrackPopupMenu(TPM_LEFTALIGN | TPM_RIGHTBUTTON , winCoord.x, winCoord.y ,