[occt.git] / dox / dev_guides / upgrade / upgrade.md

Upgrade from older OCCT versions  {#occt_dev_guides__upgrade}
================================

@tableofcontents

@section upgrade_intro Introduction

This document provides technical details on changes made in particular versions of OCCT. It can help to upgrade user applications based on previous versions of OCCT to newer ones.

@subsection upgrade_intro_precautions Precautions

Back-up your code before the upgrade.
We strongly recommend using version control system during the upgrade process and saving one or several commits at each step of upgrade, until the overall result is verified.
This will facilitate identification and correction of possible problems that can occur at the intermediate steps of upgrade.
It is advisable to document each step carefully to be able to repeat it if necessary.

@subsection upgrade_intro_disclaim Disclaimer

This document describes known issues that have been encountered during porting of OCCT and some applications and approaches that have helped to resolve these issues in known cases.
It does not pretend to cover all possible migration issues that can appear in your application.
Take this document with discretion; apply your expertise and knowledge of your application to ensure the correct result. 

The automatic upgrade tool is provided as is, without warranty of any kind, and we explicitly disclaim any liability for possible errors that may appear due to use of this tool. 
It is your responsibility to ensure that the changes you made in your code are correct. 
When you upgrade the code by an automatic script, make sure to carefully review the introduced changes at each step before committing them.


@section upgrade_65 Upgrade to OCCT 6.5.0

Porting of user applications from an earlier OCCT version to version 6.5 requires taking into account the following major changes:
* If you are not comfortable with dependence on Intel TBB, FreeImage, or Gl2Ps libraries, you will need to (re)build OCCT with these dependencies disabled.
* The low-level format version of OCAF binary and XML persistence has been incremented. Hence, the files saved by OCCT 6.5 to OCAF binary or XML format will not be readable by previous versions of OCCT.
* The *BRepMesh* triangulation algorithm has been seriously revised and now tries hard to fulfill the requested deflection and angular tolerance parameters. If you experience any problems with performance or triangulation quality (in particular, display of shapes in shading mode), consider revising the values of these parameters used in your application.
* If you were using method *ToPixMap()* of class *V3d_View* to get a buffer for passing to Windows API functions (e.g. *BitBlt*), this will not work anymore. You will need to use method *Image_PixMap::AccessBuffer()* to get the raw buffer data that can be further passed to WinAPI functions.
* As the processing of message gravity parameter in *Message* package has been improved, some application messages (especially the ones generated by IGES or STEP translators) can be suppressed or new messages appear in the application. Use relevant message level parameter to tune this behavior.

@section upgrade_651 Upgrade to OCCT 6.5.1

Porting of user applications from an earlier OCCT version to version 6.5.1 requires taking into account the following major changes:

*       Method *Graphic3d_Structure::Groups()* now returns *Graphic3d_SequenceOfGroup*. If this method has been used, the application code should be updated to iterate another collection type or, if *Graphic3d_HSetOfGroup* is required, to fill its own collection:
~~~~
const Graphic3d_SequenceOfGroup& aGroupsSeq = theStructure.Groups();
Handle(Graphic3d_HSetOfGroup) aGroupSet = new Graphic3d_HSetOfGroup();
Standard_Integer aLen = aGroupsSeq.Length();
for (Standard_Integer aGr = 1; aGr <= aLen; ++aGr)
{
 aGroupSet->Add (aGroupsSeq.Value (aGr));
}
~~~~

* All occurrences of *Select3D_Projector* in the application code (if any) should be replaced with *Handle(Select3D_Projector)*.
* The code of inheritors of *Select3D_SensitiveEntity* should be updated if they override <i>Matches()</i> (this is probable, if clipping planes are used).
* Constructor for *V3d_Plane* has been changed, so the extra argument should be removed if used in the application. It is necessary to add a new plane using method *V3d_Viewer::AddPlane()* if *V3d_Viewer* has been used to manage clipping planes list (this does not affect clipping planes representation). Please, have a look at the source code for new DRAWEXE *vclipplane* command in *ViewerTest_ObjectsCommands.cxx, VClipPlane* to see how clipping planes can be managed in the application.

@section upgrade_652 Upgrade to OCCT 6.5.2

Porting of user applications from an earlier OCCT version to version 6.5.2 requires taking into account the following major changes:
* Any code that has been generated by WOK from CDL generic classes *Tcollection_DataMap* and *Tcollection_IndexedDataMap* needs to be regenerated by WOK to take into account the change in the interface of these classes.
* The enumerations *CDF_StoreStatus* and *CDF_RetrievableStatus* have been replaced by the enumerations *PCDM_StoreStatus* and *PCDM_ReaderStatus*. Correspondingly, the methods *Open, Save* and *SaveAs* of the class *TDocStd_Application* have changed their return value. Any code, which uses these enumerations, needs to be updated.
* *BRepLib_MakeFace* has been modified to receive tolerance value for resolution of degenerated edges. This tolerance parameter has no default value to ensure that the client code takes care of passing a meaningful value, not just *Precision::Confusion*, so some porting overheads are expected. 
* If the callback mechanism in call_togl_redraw function was used in the application code, it is necessary to revise it to take into account the new callback execution and provide a check of reason value of Aspect_GraphicCallbackStruct in callback methods to confirm that the callback code is executed at the right moment. Now the callbacks are executed before redrawing the underlayer, before redrawing the overlayer and at the end of redrawing. The information about the moment when the callback is invoked is provided with the reason value in form of an additional bit flag <i>(OCC_PRE_REDRAW, OCC_PRE_OVERLAY)</i>. The state of OpenGl changed in callback methods will not be restored automatically, which might lead to unwanted behavior in redrawing procedure.
* The print method used in the application code might need to be revised to take into account the ability to choose between print algorithms: tile and stretch. The stretch algorithm will be selected by default during porting.
* It is recommended to *BRepMesh_DiscretFactory* users, to check *BRepMesh_DiscretFactory::SetDefault()* return value to determine plugin availability / validity. *BRepMesh_DiscretFactory::Discret()* method now returns handle instead of pointer. The code should be updated in the following manner:
~~~~
Handle(BRepMesh_DiscretRoot) aMeshAlgo = BRepMesh_DiscretFactory::Get().Discret (theShape, theDeflection, theAngularToler);
 if (!aMeshAlgo.IsNull())  {}
~~~~

* The default state of *BRepMesh* parallelization has been turned off. The user should switch this flag explicitly:
    *   by using methods *BRepMesh_IncrementalMesh::SetParallel(Standard_True)* for each *BRepMesh_IncrementalMesh* instance before <i>Perform()</i>;
    *   by calling *BRepMesh_IncrementalMesh::SetParallelDefault(Standard_True)* when *BRepMesh_DiscretFactory* is used to retrieve the meshing tool (this also affects auto-triangulation in *AIS*).

@section upgrade_653 Upgrade to OCCT 6.5.3

Porting of user applications from an earlier OCCT version to version 6.5.3 requires taking into account the following major changes:
* As a result of code clean-up and redesign of *TKOpenGl* driver, some obsolete functions and rendering primitives <i>(TriangleMesh, TriangleSet, Bezier, Polyline, Polygon, PolygonHoles, QuadrangleMesh</i> and *QuadrangleSet*) have been removed. Instead, the application developers should use primitive arrays that provide the same functionality but are hardware-accelerated. The details can be found in OCCT Visualization User's Guide, “Primitive Arrays” chapter.
* Applications should not call *AIS_InteractiveObject::SetPolygonOffsets()* method for an instance of *AIS_TexturedShape* class after it has been added to *AIS_InteractiveContext*. More generally, modification of *Graphic3d_AspectFillArea3d* parameters for the computed groups of any *AIS_InteractiveObject* subclass that uses texture mapping should be avoided, because this results in broken texture mapping (see issue 23118). It is still possible to apply non-default polygon offsets to *AIS_TexturedShape* by calling *SetPolygonOffsets()* before displaying the shape.
* The applications that might have used internal functions provided by *TKOpenGl* or removed primitives will need to be updated.
* In connection with the implementation of Z-layers it might be necessary to revise the application code or revise the custom direct descendant classes of *Graphic3d_GraphicDriver* and *Graphic3d_StructureManager* to use the Z-layer feature.
* Global variables *Standard_PI* and *PI* have been eliminated (use macro *M_PI* instead). 
* Method *HashCode()* has been removed from class *Standard_Transient*. It is advisable to use global function <i>HashCode()</i> for Handle objects instead. 
* Declaration of operators new/delete for classes has become consistent and is encapsulated in macros.
* Memory management has been changed to use standard heap <i>(MMGT_OPT=0)</i> and reentrant mode <i>(MMGT_REENTRANT=1)</i> by default.
* Map classes in *NCollection* package now receive one more argument defining a hash tool.

@section upgrade_654 Upgrade to OCCT 6.5.4

Porting of user applications from an earlier OCCT version to version 6.5.4 requires taking into account the following major changes:
* The code using obsolete classes *Aspect_PixMap, Xw_PixMap* and *WNT_PixMap* should be rewritten implementing class *Image_PixMap*, which is now retrieved by *ToPixMap* methods as argument. A sample code using *ToPixMap* is given below:
~~~~
#include <Image_AlienPixMap.hxx>
void dump (Handle(V3d_View)& theView3D)
{
  Standard_Integer aWndSizeX = 0;
  Standard_Integer aWndSizeY = 0;
  theView3D->Window()->Size (aWndSizeX, aWndSizeY);
  Image_AlienPixMap aPixMap;
  theView3D->ToPixMap (aPixMap, aWndSizeX, aWndSizeY);
  aPixMap.Save ("c:\\image.png");
}
~~~~
* Now OpenGL resources related to Interactive Objects are automatically freed when the last view (window) is removed from graphical driver. 
To avoid presentation data loss, the application should replace an old view with a new one in the proper order: first the new view is created and activated and only then the old one is detached and removed. 
* It is recommended to use *NCollection* containers with hasher parameter (introduced in 6.5.3) instead of global definition <i>IsEqual()/HashCode()</i> as well as to use explicit namespaces to avoid name collision.


@section upgrade_660 Upgrade to OCCT 6.6.0

Porting of user applications from an earlier OCCT version to version 6.6.0 requires taking into account the following major changes:
* Due to the changes in the implementation of Boolean Operations, the order of sub-shapes resulting from the same operation performed with OCCT 6.5.x and OCCT 6.6.0 can be different. 
It is necessary to introduce the corresponding changes in the applications for which the order of sub-shapes resulting from a Boolean operation is important. It is strongly recommended to use identification methods not relying on the order of sub-shapes (e.g. OCAF naming).
* If you need to use OCCT on Mac OS X with X11 (without Cocoa), build OCCT with defined pre-processor macro *CSF_MAC_USE_GLX11*. XLib front-end (previously the only way for unofficial OCCT builds on Mac OS X) is now disabled by default on this platform. If your application has no support for Cocoa framework you may build OCCT with XLib front-end adding *MACOSX_USE_GLX* macro to compiler options (you may check the appropriate option in WOK configuration GUI and in CMake configuration). Notice that XQuartz (XLib implementation for Mac OS X) now is an optional component and does not provide a sufficient level of integrity with native (Cocoa-based) applications in the system. It is not possible to build OCCT with both XLib and Cocoa at the same time due to symbols conflict in OpenGL functions. 
* Animation mode and degeneration presentation mode (simplified presentation for animation) and associated methods have been removed from 3D viewer functionality.
Correspondingly, the code using methods *SetAnimationModeOn(), SetAnimationModeOff(), AnimationModeIsOn(), AnimationMode(), Tumble(), SetDegenerateModeOn(), SetDegenerateModeOff()* and *DegenerateModeIsOn()* of classes *V3d_View* and *Visual3d_View* will need to be removed or redesigned. Please, notice that Hidden Line Removal presentation was not affected; however, the old code that used methods *V3d_View::SetDegenerateModeOn* or *V3d_View::SetDegenerateModeOff* to control HLR presentation should be updated to use *V3d_View::SetComputedMode* method instead.
* Calls of *Graphic3d_Group::BeginPrimitives()* and *Graphic3d_Group::EndPrimitives()* should be removed from the application code.
* Application functionality for drawing 2D graphics that was formerly based on *TKV2d* API should be migrated to *TKV3d* API. The following changes are recommended for this migration:
   * A 2D view can be implemented as a *V3d_View* instance belonging to *V3d_Viewer* managed by *AIS_InteractiveContext* instance. To turn *V3d_View* into a 2D view, the necessary view orientation should be set up at the view initialization stage using *V3d_View::SetProj()* method, and view rotation methods simply should not be called.
   * Any 2D graphic entity (formerly represented with *AIS2D_InteractiveObject*) should become a class derived from *AIS_InteractiveObject* base. These entities should be manipulated in a view using *AIS_InteractiveContext* class API.
   * All drawing code should be put into *Compute()* virtual method of a custom interactive object class and use API of *Graphic3d* package. In particular, all geometry should be drawn using class hierarchy derived from *Graphic3d_ArrayOfPrimitives*. Normally, the Z coordinate for 2D geometry should be constant, unless the application implements some advanced 2D drawing techniques like e.g. multiple "Z layers" of drawings.
   * Interactive selection of 2D presentations should be set up inside *ComputeSelection()* virtual method of a custom interactive object class, using standard sensitive entities from *Select3D* package and standard or custom entity owners derived from *SelectMgr_EntityOwner* base.
Please refer to the Visualization User's Guide for further details concerning OCCT 3D visualization and selection classes. See also *Viewer2D* OCCT sample application, which shows how 2D drawing can be implemented using TKV3d API.
* Run-time graphic driver library loading mechanism based on *CSF_GraphicShr* environment variable usage has been replaced by explicit linking against *TKOpenGl* library. The code sample below shows how the graphic driver should be created and initialized in the application code: 
~~~~
// initialize a new viewer with OpenGl graphic driver
Handle(Graphic3d_GraphicDriver) aGraphicDriver = 
new OpenGl_GraphicDriver ("TKOpenGl");
  aGraphicDriver->Begin (new Aspect_DisplayConnection());
  TCollection_ExtendedString aNameOfViewer ("Visu3D");
  Handle(V3d_Viewer) aViewer 
= new V3d_Viewer (aGraphicDriver, aNameOfViewer.ToExtString());
  aViewer->Init();

// create a new window or a wrapper over the existing window, 
// provided by a 3rd-party framework (Qt, MFC, C# or Cocoa)
#if defined(_WIN32) || defined(__WIN32__)
  Aspect_Handle aWindowHandle = (Aspect_Handle )winId();
  Handle(WNT_Window) aWindow = new WNT_Window (winId());
#elif defined(__APPLE__) && !defined(MACOSX_USE_GLX)
  NSView* aViewHandle = (NSView* )winId();
  Handle(Cocoa_Window) aWindow = new Cocoa_Window (aViewHandle);
#else
 Aspect_Handle aWindowHandle = (Aspect_Handle )winId();
  Handle(Xw_Window) aWindow = 
     new Xw_Window (aGraphicDriver->GetDisplayConnection(), aWindowHandle);
#endif // WNT

// setup the window for a new view
  Handle(V3d_View) aView = aViewer->CreateView();
  aView->SetWindow (aWindow);
~~~~

* The following changes should be made in the application-specific implementations of texture aspect:
    * *Graphic3d_TextureRoot* inheritors now should return texture image by overloading of *Graphic3d_TextureRoot::GetImage()* method instead of the old logic.
    * Now you can decide if the application should store the image copy as a field of property or reload it dynamically each time (to optimize the memory usage). The default implementation (which loads the image content from the provided file path) does not hold an extra copy since it will be uploaded to the graphic memory when first used.
    * Notice that the image itself should be created within *Image_PixMap* class from *AlienImage* package, while *Image_Image* class is no more supported and will be removed in the next OCCT release.
        
@section upgrade_670 Upgrade to OCCT 6.7.0

Porting of user applications from an earlier OCCT version to version 6.7.0 requires taking into account the following major changes.

@subsection upgrade_670_clipping Object-level clipping and capping algorithm. 

* It might be necessary to revise and port code related to management of view-level clipping to use *Graphic3d_ClipPlane* instead of *V3d_Plane* instances. Please note that *V3d_Plane* class has been preserved -- as previously, it can be used as plane representation. Another approach to represent *Graphic3d_ClipPlane* in a view is to use custom presentable object.
* The list of arguments of *Select3D_SensitiveEntity::Matches()* method for picking detection has changed. Since now, for correct selection clipping, the implementations should perform a depth clipping check and return (as output argument) minimum depth value found at the detected part of sensitive. Please refer to CDL / Doxygen documentation to find descriptive hints and snippets.
* *Select3D_SensitiveEntity::ComputeDepth()* abstract method has been removed. Custom implementations should provide depth checks by method *Matches()* instead -- all data required for it is available within a scope of single method.
* It might be necessary to revise the code of custom sensitive entities and port *Matches()* and *ComputeDepth()* methods to ensure proper selection clipping. Please note that obsolete signature of *Matches* is not used anymore by the selector. If your class inheriting *Select3D_SensitiveEntity* redefines the method with old signature the code should not compile as the return type has been changed. This is done to prevent override of removed methods.

@subsection upgrade_670_markers Redesign of markers presentation

* Due to the redesign of *Graphic3d_AspectMarker3d* class the code of custom markers initialization should be updated. Notice that you can reuse old markers definition code as *TColStd_HArray1OfByte*; however, *Image_PixMap* is now the preferred way (and supports full-color images on modern hardware).
* Logics and arguments of methods *AIS_InteractiveContext::Erase()* and *AIS_InteractiveContext::EraseAll()* have been changed. Now these methods do not remove resources from *Graphic3d_Structure*; they simply change the visibility flag in it. Therefore, the code that deletes and reсomputes resources should be revised.
* *Graphic3d_Group::MarkerSet()* has been removed. *Graphic3d_Group::AddPrimitiveArray()* should be used instead to specify marker(s) array.

@subsection upgrade_670_views Default views are not created automatically 

As the obsolete methods *Init(), DefaultOrthographicView()* and *DefaultPerspectiveView()* have been removed from *V3d_Viewer* class, the two default views are no longer created automatically. It is obligatory to create *V3d_View* instances explicitly, either directly by operator new or by calling *V3d_Viewer::CreateView()*. 

The call *V3d_Viewer::SetDefaultLights()* should also be done explicitly at the application level, if the application prefers to use the default light source configuration. Otherwise, the application itself should set up the light sources to obtain a correct 3D scene.

@subsection upgrade_670_dimensions Improved dimensions implementation

* It might be necessary to revise and port code related to management of *AIS_LengthDimension, AIS_AngleDimension* and *AIS_DiameterDimension* presentations. There is no more need to compute value of dimension and pass it as string to constructor argument. The value is computed internally. The custom value can be set with *SetCustomValue()* method.
* The definition of units and general aspect properties is now provided by *Prs3d_DimensionUnits* and *Prs3d_DimensionApsect* classes.
* It might be also necessary to revise code of your application related to usage of *AIS_DimensionDisplayMode enumeration*. If it used for specifying the selection mode, then it should be replaced by a more appropriate enumeration *AIS_DimensionSelectionMode*.

@subsection upgrade_670_list_collection NCollection_Set replaced by List collection 

It might be necessary to revise your application code, which uses non-ordered *Graphic3d_SetOfHClipPlane* collection type and replace its occurrences by ordered *Graphic3d_SequenceOfHClipPlane* collection type.


@section upgrade_680 Upgrade to OCCT 6.8.0

Porting of user applications from an earlier OCCT version to version 6.8.0 requires taking into account the following major changes.

@subsection upgrade_680_ncollection Changes in NCollection classes

Method *Assign()* in *NCollection* classes does not allow any more copying between different collection types. Such copying should be done manually.

List and map classes in *NCollection* package now require that their items be copy-constructible, but do not require items to have default constructor. Thus the code using *NCollection* classes for non-copy-constructible objects needs be updated. One option is to provide copy constructor; another possibility is to use Handle or other smart pointer.

@subsection upgrade_680_view_camera 3D View Camera

If *ViewMapping* and *ViewOrientation* were used directly, this functionality has to be ported to the new camera model. The following methods should be considered as an alternative to the obsolete *Visual3d* services (all points and directions are supposed to be in world coordinates):
* *Graphic3d_Camera::ViewDimensions()* or *V3d_View::Size()/ZSize()* -- returns view width, height and depth (or "Z size"). Since the view is symmetric now, you can easily compute top, bottom, left and right limits. *Graphic3d_Camera::ZNear()/ZFar()* can be used to obtain the near and far clipping distances with respect to the eye.
* *Graphic3d_Camera::Up()* or *V3d_View::Up()* -- returns Y direction of the view.
* *Graphic3d_Camera::Direction()* returns the reverse view normal directed from the eye, *V3d_View::Proj()* returns the old-style view normal.
* *Graphic3d_Camera::Eye()* or *V3d_View::Eye()* -- returns the camera position (same as projection reference point in old implementation).
* *Graphic3d_Camera::Center()* or *V3d_View::At()* -- returns the point the camera looks at (or view reference point according to old terminology).

The current perspective model is not fully backward compatible, so the old perspective-related functionality needs to be reviewed.

Please revise application-specific custom presentations to provide proper bounding box. Otherwise object might become erroneously clipped by automatic *ZFit* or frustum culling algorithms enabled by default.

@subsection upgrade_680_connected_objects Redesign of Connected Interactive Objects

The new implementation of connected Interactive Objects makes it necessary to take the following steps if you use connected Interactive Objects in your application.
* Use new *PrsMgr_PresentableObject* transformation API.
* Call *RemoveChild()* from the original object after connect if you need the original object and *AIS_ConnectedInteractive* to move independently.
* Access instances of objects connected to *AIS_MultiplyConnectedInteractive* with *Children()* method.
* For *PrsMgr_PresentableObject* transformation:
   * *SetLocation (TopLoc_Location) -> SetLocalTransformation (gp_Trsf)*
   * *Location -> LocalTransformation*
   * *HasLocation -> HasTransformation*
   * *ResetLocation -> ResetTransformation*
   
@subsection upgrade_680_unicode Support of UNICODE Characters 

Support of UNICODE characters introduced in OCCT breaks backward compatibility with applications, which currently use filenames in extended ASCII encoding bound to the current locale. Such applications should be updated to convert such strings to UTF-8 format.

The conversion from UTF-8 to wchar_t is made using little-endian approach. Thus, this code will not work correctly on big-endian platforms. It is needed to complete this in the way similar as it is done for binary persistence (see the macro *DO_INVERSE* in *FSD_FileHeader.hxx).*

@subsection upgrade_680_projection_shift Elimination of Projection Shift Concept

It might be necessary to revise the application code, which deals with *Center()* method of *V3d_View*. 

This method was used to pan a *V3d* view by virtually moving the screen center with respect to the projection ray passed through Eye and At points. There is no more need to derive the panning from the Center parameter to get a camera-like eye position and look at the coordinates. *Eye()* and *At()* now return these coordinates directly. When porting code dealing with *Center()*, the parameters *Eye()* and *At()* can be adjusted instead. Also *V3d_View::SetCenter(Xpix, Ypix)* method can be used instead of *V3d_View::Center(X, Y)* to center the view at the given point. However, if the center coordinates X and Y come from older OCCT releases, calling *V3d_View::Panning(-X, -Y)* can be recommended to compensate missing projection shift effect.

There are several changes introduced to *Graphic3d_Camera*. The internal data structure of the camera is based on *Standard_Real* data types to avoid redundant application-level conversions and precision errors. The transformation matrices now can be evaluated both for *Standard_Real* and *Standard_ShortReal* value types. *ZNear* and *ZFar* planes can be either negative or positive for orthographic camera projection, providing a trade-off between the camera distance and the range of *ZNear* or *ZFar* to reduce difference of exponents of values composing the orientation matrix - to avoid calculation errors. The negative values can be specified to avoid Z-clipping if the reference system of camera goes inside of the model when decreasing camera distance.

The auto z fit mode, since now, has a parameter defining Z-range margin (the one which is usually passed as argument to *ZFitAll()* method). The methods *SetAutoZFitMode(), AutoZFitScaleFactor()* and *ZFitAll()* from class *V3d_View* deal with the new parameter.

The class *Select3D_Projector* now supports both orientation and projection transformation matrices, which can be naturally set for the projector. The definition of projector was revised in *StdSelect_ViewerSelector3d*: perspective and orthographic projection parameters are handled properly. Orthographic projector is based only on direction of projection - no more *Center* property. This makes it possible to avoid unnecessary re-projection of sensitive while panning, zooming or moving along the projection ray of the view. These operations do not affect the orthographic projection.


@section upgrade_690 Upgrade to OCCT 6.9.0

Porting of user applications from an earlier OCCT version to version 6.9.0 requires taking into account the following major changes.

@subsection upgrade_690_shaders 3D Viewer initialization

3D Viewer now uses GLSL programs for managing frame buffer and stereoscopic output.
For proper initialization, application should configure **CSF_ShadersDirectory** environment variable pointing to a folder with GLSL resources - files from folder **CASROOT**/src/Shaders.
*Note that **CSF_ShadersDirectory** become optional since OCCT 7.1.0 release*.

@subsection upgrade_690_selection Changes in Selection

Selection mechanism of 3D Viewer has been redesigned to use 3-level BVH tree traverse directly in 3D space instead of projection onto 2D screen space (updated on each rotation). This architectural redesign may require appropriate changes at application level in case if custom Interactive Objects are used.

#### Standard selection
Usage of standard OCCT selection entities would require only minor updates.

Custom Interactive Objects should implement new virtual method *SelectMgr_SelectableObject::BoundingBox().*

Now the method *SelectMgr_Selection::Sensitive()* does not return *SelectBasics_SensitiveEntity*. It returns an instance of *SelectMgr_SensitiveEntity*, which belongs to a different class hierarchy (thus *DownCast()* will fail). To access base sensitive it is necessary to use method *SelectMgr_SensitiveEntity::BaseSensitive()*. For example:

~~~~
Handle(SelectMgr_Selection) aSelection = anInteractiveObject->Selection (aMode);
for (aSelection->Init(); aSelection->More(); aSelection->Next())
{
   Handle(SelectBasics_SensitiveEntity) anEntity = aSelection->Sensitive()->BaseSensitive();
}
~~~~

#### Custom sensitive entities

Custom sensitive entities require more complex changes, since the selection algorithm has been redesigned and requires different output from the entities. 

The method *SelectBasics_SensitiveEntity::Matches()* of the base class should be overridden following the new signature:

*Standard_Boolean Matches (SelectBasics_SelectingVolumeManager& theMgr, SelectBasics_PickResult& thePickResult)*, where *theMgr* contains information about the currently selected frustum or set of frustums (see *SelectMgr_RectangularFrustum, SelectMgr_TrangularFrustum, SelectMgr_TriangularFrustumSet)* and *SelectBasics_PickResult* is an output parameter, containing information about the depth of the detected entity and distance to its center of geometry.

In the overridden method it is necessary to implement an algorithm of overlap and inclusion detection (the active mode is returned by *theMgr.IsOverlapAllowed()*) with triangular and rectangular frustums.

The depth and distance to the center of geometry must be calculated for the 3D projection of user-picked screen point in the world space. You may use already implemented overlap and inclusion detection methods for different primitives from *SelectMgr_RectangularFrustum* and *SelectMgr_TriangularFrustum*, including triangle, point, axis-aligned box, line segment and planar polygon. 

Here is an example of overlap/inclusion test for a box:

~~~~
if (!theMgr.IsOverlapAllowed()) // check for inclusion
{
  Standard_Boolean isInside = Standard_True;
  return theMgr.Overlaps (myBox.CornerMin(), myBox.CornerMax(), &isInside) && isInside;
}

Standard_Real aDepth;
if (!theMgr.Overlaps (myBox, aDepth)) // check for overlap
{
  return Standard_False;
}

thePickResult =
SelectBasics_PickResult (aDepth, theMgr.DistToGeometryCenter (myCenter3d));
~~~~

The interface of *SelectBasics_SensitiveEntity* now contains four new pure virtual functions that should be implemented by each custom sensitive:
* <i>BoundingBox()</i> – returns a bounding box of the entity;
* <i>Clear()</i> – clears up all the resources and memory allocated for complex sensitive entities;
* <i>BVH()</i> – builds a BVH tree for complex sensitive entities, if it is needed;
* <i>NbSubElements()</i> – returns atomic sub-entities of a complex sensitive entity, which will be used as primitives for BVH building. If the entity is simple and no BVH is required, this method returns 1.

Each sensitive entity now has its own tolerance, which can be overridden by method *SelectBasics_SensitiveEntity::SetSensitivityFactor()* called from constructor.


@subsection upgrade_690_adaptor3d-curve Changes in Adaptor3d_Curve class

All classes inheriting *Adaptor3d_Curve* (directly or indirectly) must be updated in application code to use new signature of methods *Intervals()* and *NbIntervals()*. Note that no compiler warning will be generated if this is not done.

@subsection upgrade_690_v3d_view Changes in V3d_View class

The methods *V3d_View::Convert* and *V3d_View::ConvertWithProj()* have ceased to return point on the active grid. It might be necessary to revise the code of your application so that *V3d_View::ConvertToGrid()* was called explicitly for the values returned by *V3d_View::Convert* to get analogous coordinates on the grid. The methods *V3d_View::Convert* and *V3d_View::ConvertWithProj* convert point into reference plane of the view corresponding to the intersection with the projection plane of the eye/view point vector.

@section upgrade_700 Upgrade to OCCT 7.0.0

Porting of user applications from an earlier OCCT version to version 7.0.0 requires taking into account the following major changes.

@subsection upgrade_700_persist Removal of legacy persistence

Legacy persistence for shapes and OCAF data based on *Storage_Schema* (toolkits *TKPShape*, *TKPLCAF*, *TKPCAF*, *TKShapeShcema, TLStdLSchema, TKStdSchema*, and *TKXCAFSchema*) has been removed in OCCT 7.0.0.
The applications that used these data persistence tools need to be updated to use other persistence mechanisms.

@note For compatibility with previous versions, the possibility to read standard OCAF data (*TKLCAF* and *TKCAF*) from  files stored in the old format is preserved (toolkits *TKStdL* and *TKStd*).

The existing data files in standard formats can be converted using OCCT 6.9.1 or a previous version, as follows.

@note Reading / writing custom files capability from OCCT 6.9.1 is restored in OCCT 7.2.0. See details in @ref upgrade_720_persistence section.

#### CSFDB files

Files in *CSFDB* format (usually with extension .csfdb) contain OCCT shape data that can be converted to BRep format. 
The easiest way to do that is to use ImportExport sample provided with OCCT 6.9.0 (or earlier):

- Start ImportExport sample;
- Select File / New;
- Select File / Import / CSFDB... and specify the file to be converted;
- Drag the mouse with the right button pressed across the view to select all shapes by the rectangle;
- Select File / Export / BREP... and specify the location and name for the resulting file

#### OCAF and XCAF documents

Files containing OCAF data saved in the old format usually have extensions <i>.std, .sgd</i> or <i>.dxc</i> (XDE documents).
These files can be converted to XML or binary OCAF formats using DRAW Test Harness commands.
Note that if the file contains only attributes defined in *TKLCAF* and *TKCAF*, this action can be performed in OCCT 7.0; otherwise OCCT 6.9.1 or earlier should be used.

For that, start *DRAWEXE* and perform the following commands: 

  * To convert <i>*.std</i> and <i>*.sgd</i> file formats to binary format <i>*.cbf</i> (The created document should be in *BinOcaf* format instead of *MDTV-Standard*):

  @code
  Draw[]> pload ALL
  Draw[]> Open [path to *.std or *.sgd file] Doc
  Draw[]> Format Doc BinOcaf
  Draw[]> SaveAs Doc [path to the new file]
  @endcode

  * To convert <i>*.dxc</i> file format to binary format <i>*.xbf</i> (The created document should be in *BinXCAF* format instead of *MDTV-XCAF*):

  @code
  Draw[]> pload ALL
  Draw[]> XOpen [path to *.dxc file] Doc
  Draw[]> Format Doc BinXCAF
  Draw[]> XSave Doc [path to the new file]
  @endcode

On Windows, it is necessary to replace back slashes in the file path by  direct slashes or pairs of back slashes.

Use *XmlOcaf* or *XmlXCAF* instead of *BinOcaf* and *BinXCAF*, respectively, to save in XML format instead of binary one.

@subsection upgrade_occt700_cdl Removal of CDL and WOK

OCCT code has been completely refactored in version 7.0 to get rid of obsolete technologies used since its inception: CDL (Cas.Cade Definition Language) and WOK (Workshop Organization Kit).

C++ code previously generated by WOK from CDL declarations is now included directly in OCCT sources.

This modification did not change names, API, and behavior of existing OCCT classes, thus in general the code based on OCCT 6.x should compile and work fine with OCCT 7.0.
However, due to redesign of basic mechanisms (CDL generic classes, Handles and RTTI) using C++ templates, some changes may be necessary in the code when porting to OCCT 7.0, as described below.

WOK is not necessary anymore for building OCCT from sources, though it still can be used in a traditional way -- auxiliary files required for that are preserved.
The recommended method for building OCCT 7.x is CMake, see @ref occt_dev_guides__building_cmake.
The alternative solution is to use project files generated by OCCT legacy tool **genproj**, see @ref occt_dev_guides__building_msvc, @ref occt_dev_guides__building_code_blocks, and @ref occt_dev_guides__building_xcode.

@subsubsection upgrade_occt700_cdl_auto Automatic upgrade

Most of typical changes required for upgrading code for OCCT 7.0 can be done automatically using the *upgrade* tool included in OCCT 7.0.
This tool is a Tcl script, thus Tcl should be available on your workstation to run it.

Example:
~~~~~
 $ tclsh
 % source <path_to_occt>/adm/upgrade.tcl
 % upgrade -recurse -all -src=<path_to_your_sources>
~~~~~

On Windows, the helper batch script *upgrade.bat* can be used, provided that Tcl is either available in *PATH*, or configured via *custom.bat* script (for instance, if you use OCCT installed from Windows installer package). Start it from the command prompt:

~~~~~
cmd> <path_to_occt>\upgrade.bat -recurse -all -inc=<path_to_occt>\inc -src=<path_to_your_sources> [options]
~~~~~

Run the upgrade tool without arguments to see the list of available options.

The upgrade tool performs the following changes in the code.

1. Replaces macro *DEFINE_STANDARD_RTTI* by *DEFINE_STANDARD_RTTIEXT*, with second argument indicating base class for the main argument class (if inheritance is recognized by the script):
~~~~~
DEFINE_STANDARD_RTTI(Class) -> DEFINE_STANDARD_RTTIEXT(Class, Base)
~~~~~

   @note If macro *DEFINE_STANDARD_RTTI* with two arguments (used in intermediate development versions of OCCT 7.0) is found, the script will convert it to either *DEFINE_STANDARD_RTTIEXT* or *DEFINE_STANDARD_RTTI_INLINE*. 
   The former case is used if current file is header and source file with the same name is found in the same folder. 
   In this case, macro *IMPLEMENT_STANDARD_RTTI* is injected in the corresponding source file.
   The latter variant defines all methods for RTTI as inline, and does not require *IMPLEMENT_STANDARD_RTTIEXT* macro. 

2. Replaces forward declarations of collection classes previously generated from CDL generics (defined in *TCollection* package) by inclusion of the corresponding header:
~~~~~
class TColStd_Array1OfReal; -> #include <TColStd_Array1OfReal.hxx>
~~~~~

3. Replaces underscored names of *Handle* classes by usage of a macro:
~~~~~
Handle_Class -> Handle(Class)
~~~~~
  This change is not applied if the source or header file is recognized as containing the definition of Qt class with signals or slots, to avoid possible compilation errors of MOC files caused by inability of MOC to recognize macros (see http://doc.qt.io/qt-4.8/signalsandslots.html).
  The file is considered as defining a Qt object if it contains strings *Q_OBJECT* and either *slots:* or *signals:*. 

4. Removes forward declarations of classes with names <i>Handle(C)</i> or *Handle_C*, replacing them either by forward declaration of its argument class, or (for files defining Qt objects) <i>\#include</i> statement for a header with the name of the argument class and extension .hxx:
~~~~~
class Handle(TColStd_HArray1OfReal); -> #include <TColStd_HArray1OfReal.hxx>
~~~~~

5. Removes <i> \#includes </i> of files <i>Handle_...hxx</i> that have disappeared in OCCT 7.0:
~~~~~
#include <Handle_Geom_Curve.hxx> ->
~~~~~

6. Removes *typedef* statements that use *Handle* macro to generate the name:
~~~~~
typedef NCollection_Handle<Message_Msg> Handle(Message_Msg); ->
~~~~~

7. Converts C-style casts applied to Handles into calls to <i>DownCast()</i> method:
~~~~~
    ((Handle(A)&)b)     -> Handle(A)::DownCast(b)
    (Handle(A)&)b       -> Handle(A)::DownCast(b)
    (*((Handle(A)*)&b)) -> Handle(A)::DownCast(b)
    *((Handle(A)*)&b)   -> Handle(A)::DownCast(b)
    (*(Handle(A)*)&b)   -> Handle(A)::DownCast(b)
~~~~~

8. Moves <i>Handle()</i> macro out of namespace scope:
~~~~~
Namespace::Handle(Class) -> Handle(Namespace::Class)
~~~~~

9. Converts local variables of reference type, which are initialized by a temporary object returned by call to <i>DownCast()</i>, to the variables of non-reference type (to avoid using references to destroyed memory):
~~~~~
    const Handle(A)& a = Handle(B)::DownCast (b); -> Handle(A) a (Handle(B)::DownCast (b));
~~~~~

10. Adds  <i>\#include</i> for all classes used as argument to macro <i>STANDARD_TYPE()</i>, except for already included ones;

11. Removes uses of obsolete macros *IMPLEMENT_DOWNCAST* and *IMPLEMENT_STANDARD_*..., except *IMPLEMENT_STANDARD_RTTIEXT*.

    @note If you plan to keep compatibility of your code with older versions of OCCT, add option <i>-compat</i> to avoid this change. See also @ref upgrade_occt700_cdl_compat.

.

As long as the upgrade routine runs, some information messages are sent to the standard output. 
In some cases the warnings or errors like the following may appear:

~~~~~
  Error in {HEADER_FILE}: Macro DEFINE_STANDARD_RTTI used for class {CLASS_NAME} whose declaration is not found in this file, cannot fix
~~~~~

Be sure to check carefully all reported errors and warnings, as the corresponding code will likely require manual corrections.
In some cases these messages may help you to detect errors in your code, for instance, cases where *DEFINE_STANDARD_RTTI* macro is used with incorrect class name as an argument.

@subsubsection upgrade_occt700_cdl_compiler Possible compiler errors

Some situations requiring upgrade cannot be detected and / or handled by the automatic procedure.
If you get compiler errors or warnings when trying to build the upgraded code, you will need to fix them manually. 
The following paragraphs list known situations of this kind.

#### Missing header files

The use of handle objects (construction, comparison using operators == or !=, use of function <i>STANDRAD_TYPE()</i> and method <i>DownCast()</i>) now requires the type of the object pointed by Handle to be completely known at compile time. Thus it may be necessary to include header of the corresponding class to make the code compilable.

For example, the following lines will fail to compile if *Geom_Line.hxx* is not included:

~~~~~
Handle(Geom_Line) aLine = 0;
if (aLine != aCurve) {...} 
if (aCurve->IsKind(STANDARD_TYPE(Geom_Line)) {...}
aLine = Handle(Geom_Line)::DownCast (aCurve);
~~~~~

Note that it is not necessary to include header of the class to declare Handle to it.
However, if you define a class *B* that uses Handle(*A*) in its fields, or contains a method returning Handle(*A*), it is advisable to have header defining *A* included in the header of *B*.
This will eliminate the need to include the header *A* in each source file where class *B* is used.

#### Ambiguity of calls to overloaded functions

This issue appears in the compilers that do not support default arguments in template functions (known cases are Visual C++ 10 and 11): the compiler reports an ambiguity error if a handle is used in the argument of a call to the function that has two or more overloaded versions, receiving handles to different types. 
The problem is that operator  <i> const handle<T2>& </i> is defined for any type *T2*, thus the compiler cannot make the right choice.

Example:
~~~~~
void func (const Handle(Geom_Curve)&);
void func (const Handle(Geom_Surface)&);

Handle(Geom_TrimmedCurve) aCurve = new Geom_TrimmedCurve (...);
func (aCurve); // ambiguity error in VC++ 10
~~~~~

Note that this problem can be avoided in many cases if macro *OCCT_HANDLE_NOCAST* is used, see @ref upgrade_occt700_cdl_nocast "below".

To resolve this ambiguity, change your code so that argument type should correspond exactly to the function signature. 
In some cases this can be done by using the relevant type for the corresponding variable, like in the example above:

~~~~~
Handle(Geom_Curve) aCurve = new Geom_TrimmedCurve (...);  
~~~~~

Other variants consist in assigning the argument to a local variable of the correct type and using the direct cast or constructor:

~~~~~
const Handle(Geom_Curve)& aGCurve (aTrimmedCurve);
func (aGCurve); // OK - argument has exact type
func (static_cast(aCurve)); // OK - direct cast 
func (Handle(Geom_Curve)(aCurve)); // OK - temporary handle is constructed
~~~~~

Another possibility consists in defining additional template variant of the overloaded function causing ambiguity, and using *SFINAE* to resolve the ambiguity.
This technique can be illustrated by the definition of the template variant of method <i>IGESData_IGESWriter::Send()</i>.

#### Lack of implicit cast to base type

As the cast of a handle to the reference to another handle to the base type has become a user-defined operation, the conversions that require this cast together with another user-defined cast will not be resolved automatically by the compiler.

For example:

~~~~~
Handle(Geom_Geometry) aC = GC_MakeLine (p, v); // compiler error
~~~~~

The problem is that the class *GC_MakeLine* has a user-defined conversion to <i>const Handle(Geom_TrimmedCurve)&,</i> which is not the same as the type of the local variable *aC*.

To resolve this, use method <i>Value()</i>:

~~~~~
Handle(Geom_Geometry) aC = GC_MakeLine (p, v).Value(); // ok
~~~~~

or use variable of the appropriate type:

~~~~~
Handle(Geom_TrimmedCurve) aC = GC_MakeLine (p, v); // ok
~~~~~

A similar problem appears with GCC compiler, when *const* handle to derived type is used to construct handle to base type via assignment (and in some cases in return statement), for instance:

~~~~~
  const Handle(Geom_Line) aLine;
  Handle(Geom_Curve) c1 = aLine; // GCC error 
  Handle(Geom_Curve) c2 (aLine); // ok
~~~~~

This problem is specific to GCC and it does not appear if macro *OCCT_HANDLE_NOCAST* is used, see @ref upgrade_occt700_cdl_nocast "below".

#### Incorrect use of STANDARD_TYPE and Handle macros

You might need to clean your code from incorrect use of macros *STANDARD_TYPE*() and *Handle*().

1. Explicit definitions of static functions with names generated by macro *STANDARD_TYPE()*, which are artifacts of old implementation of RTTI, should be removed.
   
   Example:
~~~~~
const Handle(Standard_Type)& STANDARD_TYPE(math_GlobOptMin)
{
  static Handle(Standard_Type) _atype = new Standard_Type ("math_GlobOptMin", sizeof (math_GlobOptMin));
  return _atype;
}
~~~~~

2. Incorrect location of closing parenthesis of *Handle()* macro that was not detectable in OCCT 6.x will cause a compiler error and must be corrected.

   Example (note misplaced closing parenthesis):
~~~~~
aBSpline = Handle( Geom2d_BSplineCurve::DownCast(BS->Copy()) );
~~~~~

#### Use of class Standard_AncestorIterator

Class *Standard_AncestorIterator* has been removed; use method *Parent()* of *Standard_Type* class to parse the inheritance chain.

#### Absence of cast to Standard_Transient*

Handles in OCCT 7.0 do not have the operator of conversion to <i>Standard_Transient*,</i> which was present in earlier versions.
This is done to prevent possible unintended errors like this:

~~~~~
Handle(Geom_Line) aLine = ...;
Handle(Geom_Surface) aSurf = ...;
...
if (aLine == aSurf) {...} // will cause a compiler error in OCCT 7.0, but not OCCT 6.x
~~~~~

The places where this implicit cast has been used should be corrected manually.
The typical situation is when Handle is passed to stream:

~~~~~
Handle(Geom_Line) aLine = ...;
os << aLine; // in OCCT 6.9.0, resolves to operator << (void*) 
~~~~~

Call method <i>get()</i> explicitly to output the address of the Handle.

#### Method DownCast for non-base types

Method *DownCast()* in OCCT 7.0 is made templated; if its argument is not a base class, "deprecated" compiler warning is generated.
This is done to prevent possible unintended errors like this:

~~~~~
Handle(Geom_Surface) aSurf = ;
Handle(Geom_Line) aLine = 
  Handle(Geom_Line)::DownCast (aSurf); // will cause a compiler warning in OCCT 7.0, but not OCCT 6.x
~~~~~

The places where this cast has been used should be corrected manually.

If down casting is used in a template context where the argument can have the same or unrelated type so that *DownCast()* may be not available in all cases, use C++ *dynamic_cast<>* instead, e.g.: 

~~~~~
template <class T>
bool CheckLine (const Handle(T) theArg)
{
  Handle(Geom_Line) aLine = dynamic_cast<Geom_Line> (theArg.get());
  ...
}
~~~~~

@subsubsection upgrade_occt700_cdl_runtime Possible runtime problems

Here is the list of known possible problems at run time after the upgrade to OCCT 7.0.

#### References to temporary objects

In previous versions, the compiler was able to detect the situation when a local variable of a "reference to a Handle" type is initialized by temporary object, and ensured that lifetime of that object is longer than that of the variable. 
In OCCT 7.0 with default options, it will not work if types of the temporary object and variable are different (due to involvement of user-defined type cast), thus such temporary object will be destroyed immediately.

This problem does not appear if macro *OCCT_HANDLE_NOCAST* is used during compilation, see below.

Example:

~~~~~
// note that DownCast() returns new temporary object!
const Handle(Geom_BoundedCurve)& aBC =
Handle(Geom_TrimmedCurve)::DownCast(aCurve);
aBC->Transform (T); // access violation in OCCT 7.0
~~~~~

@subsubsection upgrade_occt700_cdl_nocast Option to avoid cast of handle to reference to base type

In OCCT 6.x and earlier versions the handle classes formed a hierarchy echoing the hierarchy of the corresponding object classes .
This automatically enabled the possibility to use the handle to a derived class in all contexts where the handle to a base class was needed, e.g. to pass it in a function by reference without copying:

~~~~
Standard_Boolean GetCurve (Handle(Geom_Curve)& theCurve);
....
Handle(Geom_Line) aLine;
if (GetCurve (aLine)) {
  // use aLine, unsafe
}
~~~~

This feature was used in multiple places in OCCT and dependent projects.
However it is potentially unsafe: in the above example no checks are done at compile time or at run time to ensure that the type assigned to the argument handle is compatible with the type of the handle passed as argument. 
If an object of incompatible type (e.g. Geom_Circle) is assigned to *theCurve*, the behavior will be unpredictable. 

For compatibility with the existing code, OCCT 7.0 keeps this possibility by default, providing operators of type cast to the handle to a base type. However, this feature is unsafe and in specific situations it may cause compile-time or run-time errors as described above.

To provide a safer behavior, this feature can be disabled by a compile-time macro *OCCT_HANDLE_NOCAST*.
When it is used, constructors and assignment operators are defined (instead of type cast operators) to convert handles to a derived type into handles to a base type.
This implies creation of temporary objects and hence may be more expensive at run time in some circumstances, however this way is more standard, safer, and in general recommended.

The code that relies on the possibility of casting to base should be amended to always use the handle of argument type in function call and to use *DownCast()* to safely convert the result to the desired type.
For instance, the code from the example below can be changed as follows:

~~~~~
Handle(Geom_Line) aLine;
Handle(Geom_Curve) aCurve;
if (GetCurve (aCure) && !(aLine = Handle(Geom_Line)::DownCast (aCurve)).IsNull()) {
  // use aLine safely
}
~~~~~

@subsubsection upgrade_occt700_cdl_compat Preserving compatibility with OCCT 6.x

If you like to preserve the compatibility of your application code with OCCT versions 6.x even after the upgrade to 7.0, consider the following suggestions:

1. If your code used sequences of macros *IMPLEMENT_STANDARD_*... generated by WOK, replace them by single macro *IMPLEMENT_STANDARD_RTTIEXT*

2. When running automatic upgrade tool, add option <i>-compat</i>.

3. Define macros *DEFINE_STANDARD_RTTIEXT* and *DEFINE_STANDARD_RTTI_INLINE* when building with previous versions of OCCT, resolving to *DEFINE_STANDARD_RTTI* with single argument 

   Example:
~~~~~   
#if OCC_VERSION_HEX < 0x070000
  #define DEFINE_STANDARD_RTTIEXT(C1,C2) DEFINE_STANDARD_RTTI(C1)
  #define DEFINE_STANDARD_RTTI_INLINE(C1,C2) DEFINE_STANDARD_RTTI(C1)
#endif
~~~~~

@subsubsection upgrade_occt700_cdl_wok Applications based on CDL and WOK

If your application is essentially based on CDL, and you need to upgrade it to OCCT 7.0, you will very likely need to convert your application code to non-CDL form.
This is a non-trivial effort; the required actions would depend strongly on the structure of the code and used CDL features.

The upgrade script and sources of a specialized WOK version used for OCCT code upgrade can be found in WOK Git repository in branch [CR0_700_2](http://git.dev.opencascade.org/gitweb/?p=occt-wok.git;a=log;h=refs/heads/CR0_700_2).

[Contact us](http://www.opencascade.com/contact/) if you need more help.

@subsection upgrade_occt700_bspline Separation of BSpline cache

Implementation of NURBS curves and surfaces has been revised: the cache of polynomial coefficients, which is used to accelerate the calculation of values of a B-spline, has been separated from data objects *Geom2d_BSplineCurve, Geom_BSplineCurve* and *Geom_BSplineSurface* into the dedicated classes *BSplCLib_Cache* and *BSplSLib_Cache*. 

The benefits of this change are:
* Reduced memory footprint of OCCT shapes (up to 20% on some cases)
* Possibility to evaluate the same B-Spline concurrently in parallel threads without data races and mutex locks 

The drawback is that direct evaluation of B-Splines using methods of curves and surfaces becomes slower due to the absence of cache. The slow-down can be avoided by using adaptor classes *Geom2dAdaptor_Curve, GeomAdaptor_Curve* and *GeomAdaptor_Surface*, which now use cache when the curve or surface is a B-spline.

OCCT algorithms have been changed to use adaptors for B-spline calculations instead of direct methods for  curves and surfaces.
The same changes (use of adaptors instead of direct call to curve and surface methods) should be implemented in relevant places in the applications based on OCCT to get the maximum performance.

@subsection upgrade_occt700_booleanresult Structural result of Boolean operations

The result of Boolean operations became structured according to the structure of the input shapes. Therefore it may impact old applications that always iterate on direct children of the result compound assuming to obtain solids as iteration items, regardless of the structure of the input shapes. In order to get always solids as iteration items it is recommended to use TopExp_Explorer instead of TopoDS_Iterator.

@subsection upgrade_occt700_brepextrema BRepExtrema_ExtCC finds one solution only

Extrema computation between non-analytical curves in shape-shape distance calculation algorithm has been changed in order to return only one solution. So, if e.g. two edges are created on parallel b-spline curves the algorithm BRepExtrema_DistShapeShape will return only one solution instead of enormous number of solutions. There is no way to get algorithm working in old manner.

@subsection upgrade_occt700_sorttools Removal of SortTools package

Package *SortTools* has been removed. 
The code that used the tools provided by that package should be corrected manually.
The recommended approach is to use sorting algorithms provided by STL.

For instance:
~~~~~
#include <SortTools_StraightInsertionSortOfReal.hxx>
#include <SortTools_ShellSortOfReal.hxx>
#include <TCollection_CompareOfReal.hxx>
...
TCollection_Array1OfReal aValues = ...;
...
TCollection_CompareOfReal aCompReal;
SortTools_StraightInsertionSortOfReal::Sort(aValues, aCompReal);
~~~~~
can be replaced by:
~~~~~
#include <algorithm>
...
TCollection_Array1OfReal aValues = ...;
...
std::stable_sort (aValues.begin(), aValues.end());
~~~~~

@subsection upgrade_occt700_2dlayers On-screen objects and ColorScale

The old mechanism for rendering Underlay and Overlay on-screen 2D objects based on *Visual3d_Layer* and immediate drawing model (uncached and thus slow) has been removed.
Classes *Aspect_Clayer2d, OpenGl_GraphicDriver_Layer, Visual3d_Layer, Visual3d_LayerItem, V3d_LayerMgr* and *V3d_LayerMgrPointer* have been deleted.

General AIS interactive objects with transformation persistence flag *Graphic3d_TMF_2d* can be used as a replacement of *Visual3d_LayerItem*.
The anchor point specified for transformation persistence defines the window corner of  (or center in case of (0, 0) point).
To keep on-screen 2D objects on top of the main screen, they can be assigned to the appropriate Z-layer.
Predefined Z-layers *Graphic3d_ZLayerId_TopOSD* and *Graphic3d_ZLayerId_BotOSD* are intended to replace Underlay and Overlay layers within the old API.

*ColorScale* object previously implemented using *Visual3d_LayerItem* has been moved to a new class *AIS_ColorScale*, with width and height specified explicitly.
The property of *V3d_View* storing the global *ColorScale* object has been removed with associated methods *V3d_View::ColorScaleDisplay(), V3d_View::ColorScaleErase(), V3d_View::ColorScaleIsDisplayed()* and *V3d_View::ColorScale()* as well as the classes *V3d_ColorScale, V3d_ColorScaleLayerItem* and *Aspect_ColorScale*.
Here is an example of creating *ColorScale* using the updated API:

~~~~~
Handle(AIS_ColorScale) aCS = new AIS_ColorScale();
// configuring
Standard_Integer aWidth, aHeight;
aView->Window()->Size (aWidth, aHeight);
aCS->SetSize              (aWidth, aHeight);
aCS->SetRange             (0.0, 10.0);
aCS->SetNumberOfIntervals (10);
// displaying
aCS->SetZLayer (Graphic3d_ZLayerId_TopOSD);
aCS->SetTransformPersistence (Graphic3d_TMF_2d, gp_Pnt (-1,-1,0));
aCS->SetToUpdate();
theContextAIS->Display (aCS);
~~~~~

To see how 2d objects are implemented in OCCT you can call Draw commands *vcolorscale, vlayerline* or *vdrawtext* (with <i>-2d</i> option).
Draw command *vcolorscale* now requires the name of *ColorScale* object as argument.
To display this object use command *vdisplay*. For example:

~~~~~
pload VISUALIZATION
vinit
vcolorscale cs -demo
pload MODELING
box b 100 100 100
vdisplay b
vsetdispmode 1
vfit
vlayerline 0 300 300 300 10
vdrawtext t "2D-TEXT" -2d -pos 0 150 0 -color red
~~~~~

Here is a small example in C++ illustrating how to display a custom AIS object in 2d:
~~~~~
Handle(AIS_InteractiveContext) aContext = ...;
Handle(AIS_InteractiveObject) anObj =...; // create an AIS object
anObj->SetZLayer(Graphic3d_ZLayerId_TopOSD); // display object in overlay
anObj->SetTransformPersistence (Graphic3d_TMF_2d, gp_Pnt (-1,-1,0)); // set 2d flag, coordinate origin is set to down-left corner
aContext->Display (anObj); // display the object
~~~~~

@subsection upgrade_occt700_userdraw UserDraw and Visual3d

#### Visual3d package

Package *Visual3d* implementing the intermediate layer between high-level *V3d* classes
and low-level OpenGl classes for views and graphic structures management has been dropped.

The *OpenGl_View* inherits from the new class *Graphic3d_CView*.
*Graphic3d_CView* is an interface class that declares abstract methods for managing displayed structures,
display properties and a base layer code that implements computation
and management of HLR (or more broadly speaking view-depended) structures.

In the new implementation it takes place of the eliminated *Visual3d_View*.
As before the instance of *Graphic3d_CView* is still completely managed by *V3d_View* classes.
It can be accessed through *V3d_View* interface but normally it should not be required as all its methods are completely wrapped.

In more details, a concrete specialization of *Graphic3d_CView* is created and returned by the graphical driver on request.
Right after the creation the views are directly used for setting rendering properties and adding graphical structures to be displayed.

The rendering of graphics is possible after mapping a window and activating the view.
The direct setting of properties obsoletes the use of intermediate structures with display parameter
like *Visual3d_ContextView*, etc. This means that the whole package *Visual3d* becomes redundant.

The functionality previously provided by *Visual3d* package has been redesigned in the following way :
- The management of display of structures has been moved from *Visual3d_ViewManager* into *Graphic3d_StructureManager*.
- The class *Visual3d_View* has been removed. The management of computed structures has been moved into the base layer of *Graphi3d_CView*.
- All intermediate structures for storing view parameters, e.g. *Visual3d_ContextView*, have been removed.
  The settings are now kept by instances of *Graphic3d_CView*.
- The intermediate class *Visual3d_Light* has been removed. All light properties are stored in *Graphic3d_CLight* structure, which is directly accessed by instances of *V3d_Light* classes.
- All necessary enumerations have been moved into *Graphic3d* package.

#### Custom OpenGL rendering and UserDraw

Old APIs based on global callback functions for creating *UserDraw* objects and for performing custom OpenGL rendering within the view have been dropped.
*UserDraw* callbacks are no more required since *OpenGl_Group* now inherits *Graphic3d_Group* and thus can be accessed directly from *AIS_InteractiveObject*:

~~~~~
//! Class implementing custom OpenGL element.
class UserDrawElement : public OpenGl_Element {};

//! Implementation of virtual method AIS_InteractiveObject::Compute().
void UserDrawObject::Compute (const Handle(PrsMgr_PresentationManager3d)& thePrsMgr,
                              const Handle(Prs3d_Presentation)& thePrs,
                              const Standard_Integer theMode)
{
  Graphic3d_Vec4 aBndMin (myCoords[0], myCoords[1], myCoords[2], 1.0f);
  Graphic3d_Vec4 aBndMax (myCoords[3], myCoords[4], myCoords[5], 1.0f);

  // casting to OpenGl_Group should be always true as far as application uses OpenGl_GraphicDriver for rendering
  Handle(OpenGl_Group) aGroup = Handle(OpenGl_Group)::DownCast (thePrs->NewGroup());
  aGroup->SetMinMaxValues (aBndMin.x(), aBndMin.y(), aBndMin.z(),
                           aBndMax.x(), aBndMax.y(), aBndMax.z());
  UserDrawElement* anElem = new UserDrawElement (this);
  aGroup->AddElement(anElem);

  // invalidate bounding box of the scene
  thePrsMgr->StructureManager()->Update();
}
~~~~~

To perform a custom OpenGL code within the view, it is necessary to inherit from class *OpenGl_View*.
See the following code sample:

~~~~~
//! Custom view.
class UserView : public OpenGl_View
{
public:
  //! Override rendering into the view.
  virtual void render (Graphic3d_Camera::Projection theProjection,
                       OpenGl_FrameBuffer*          theReadDrawFbo,
                       const Standard_Boolean       theToDrawImmediate)
  {
    OpenGl_View::render (theProjection, theReadDrawFbo, theToDrawImmediate);
    if (theToDrawImmediate)
    {
      return;
    }

    // perform custom drawing
    const Handle(OpenGl_Context)& aCtx = myWorkspace->GetGlContext();
    GLfloat aVerts[3] = { 0.0f, 0,0f, 0,0f };
    aCtx->core20->glEnableClientState(GL_VERTEX_ARRAY);
    aCtx->core20->glVertexPointer(3, GL_FLOAT, 0, aVerts);
    aCtx->core20->glDrawArrays(GL_POINTS, 0, 1);
    aCtx->core20->glDisableClientState(GL_VERTEX_ARRAY);
  }

};

//! Custom driver for creating UserView.
class UserDriver : public OpenGl_GraphicDriver
{
public:
  //! Create instance of own view.
  virtual Handle(Graphic3d_CView) CreateView (const Handle(Graphic3d_StructureManager)& theMgr) Standard_OVERRIDE
  {
    Handle(UserView) aView = new UserView (theMgr, this, myCaps, myDeviceLostFlag, &myStateCounter);
    myMapOfView.Add (aView);
    for (TColStd_SequenceOfInteger::Iterator aLayerIt (myLayerSeq); aLayerIt.More(); aLayerIt.Next())
    {
      const Graphic3d_ZLayerId        aLayerID  = aLayerIt.Value();
      const Graphic3d_ZLayerSettings& aSettings = myMapOfZLayerSettings.Find (aLayerID);
      aView->AddZLayer         (aLayerID);
      aView->SetZLayerSettings (aLayerID, aSettings);
    }
    return aView;
  }
};

~~~~~

@subsection upgrade_occt700_localcontext Deprecation of Local Context

The conception of Local Context has been deprecated.
The related classes, e.g. *AIS_LocalContext*, and methods ( <i>AIS_InteractiveContext::OpenLocalContext()</i> and others) will be removed in a future OCCT release.

The main functionality provided by Local Context - selection of object subparts - can be now used within Neutral Point without opening any Local Context.

The property *SelectionMode()* has been removed from the class *AIS_InteractiveObject*.
This property contradicts to selection logic, since it is allowed to activate several Selection modes at once.
Therefore keeping one selection mode as object field makes no sense.
Applications that used this method should implement selection mode caching at application level, if it is necessary for some reason.

@subsection upgrade_occt700_separate_caf_visualisation Separation of visualization part from TKCAF

Visualization CAF attributes have been moved into a new toolkit *TKVCAF*. 
If your application uses the classes from *TPrsStd* package then add link to *TKVCAF* library.

Version numbers of *BinOCAF* and *XmlOCAF* formats are incremented; new files cannot be read by earlier versions of OCCT.

Before loading the OCAF files saved by previous versions and containing *TPrsStd_AISPresentation* attribute it is necessary to define the environment variable *CSF_MIGRATION_TYPES*, pointing to file *src/StdResources/MigrationSheet.txt*.
When using documents loaded from a file, make sure to call method *TPrsStd_AISViewer::New()* prior to accessing *TPrsStd_AISPresentation* attributes in this document as that method creates them.

@subsection upgrade_euler_angles Correction of interpretation of Euler angles in gp_Quaternion

Conversion of *gp_Quaternion* to and from intrinsic Tait-Bryan angles (including *gp_YawPitchRoll*) is fixed.

Before that fix the sequence of rotation axes was opposite to the intended; e.g. *gp_YawPitchRoll* (equivalent to *gp_Intrinsic_ZYX*) actually  defined intrinsic rotations around X, then Y, then Z. Now the rotations are made in the correct order.

The applications that use *gp_Quaternion* to convert Yaw-Pitch-Roll angles (or other intrinsic Tait-Bryan sequences) may need to be updated to take this change into account.

@subsection upgrade_zoom_persistent_selection Zoom Persistent Selection

Zoom persistent selection introduces a new structure *Graphic3d_TransformPers* to transform persistence methods and parameters and a new class *Graphic3d_WorldViewProjState* to refer to the camera transformation state. You might need to update your code to deal with the new classes if you were using the related features. Please, keep in mind the following: 
* *Graphic3d_Camera::ModelViewState* has been renamed to *Graphic3d_Camera::WorldViewState*.
* Transformation matrix utilities from *OpenGl_Utils* namespace have been moved to *Graphic3d_TransformUtils* and *Graphic3d_TransformUtils.hxx* header respectively.
* Matrix stack utilities from *OpenGl_Utils* namespace have been moved to *OpenGl_MatrixStack* class and *OpenGl_MatrixStack.hxx* header respectively.
* *OpenGl_View* methods *Begin/EndTransformPersistence* have been removed. Please, use *Graphic3d_TransformPers::Apply()* instead to apply persistence to perspective and world-view projection matrices.

@subsection upgrade_occt700_correction_of_texture Texture mapping of objects

Textured objects now have the priority over the environment mapping.

Redundant enumerations *V3d_TypeOfSurface* and *Graphic3d_TypeOfSurface*, class *OpenGl_SurfaceDetailState*, the corresponding methods from *Graphic3d_CView, OpenGl_ShaderManager, OpenGl_View, V3d_View* and *V3d_Viewer* have been deleted.
Draw command *VSetTextureMode* has been deleted.

@subsection upgrade_occt700_wfshape Shape presentation builders

Presentation tools for building Wireframe presentation have been refactored to eliminate duplicated code and interfaces.
Therefore, the following classes have been modified:
* *StdPrs_WFDeflectionShape* and *Prs3d_WFShape* have been removed. *StdPrs_WFShape* should be used instead.
* *StdPrs_ToolShadedShape* has been renamed to *StdPrs_ToolTriangulatedShape*.

@section upgrade_occt710 Upgrade to OCCT 7.1.0

@subsection upgrade_710_aspects Presentation attributes

This section should be considered if application defines custom presentations, i.e. inherited from *AIS_InteractiveObject*.
The previous versions of OCCT have three levels for defining presentation properties (e.g. colors, materials, etc.):

1. For the entire structure - *Graphic3d_Structure* / *Prs3d_Presentation*.
2. For a specific group of primitives - *Graphic3d_Group::SetGroupPrimitivesAspect()* overriding structure aspects.
3. For a specific primitive array within the graphic group - *Graphic3d_Group::SetPrimitivesAspect()*.

The structure level has de facto not been used for a long time since OCCT presentations always define aspects at the graphic group level (overriding any structure aspects).
Within this OCCT release, structure level of aspects has been completely removed. In most cases the application code should just remove missing methods. In those rare cases, when this functionality was intentionally used, the application should explicitly define aspects to the  appropriate graphic groups.

Note that defining several different aspects within the same graphic group should also be avoided in the application code since it is a deprecated functionality which can be removed in further releases.
*Graphic3d_Group::SetGroupPrimitivesAspect()* should be the main method defining presentation attributes.

The implementation of *Graphic3d_Group::SetGroupPrimitivesAspect()* has been changed from copying aspect values to keeping the passed object.
Although it was not documented, previously it was possible to modify a single aspect instance, like *Graphic3d_AspectFillArea3d* and set it to multiple groups.
Now such code would produce an unexpected result and therefore should be updated to create the dedicated aspect instance.

@subsection upgrade_710_types Typedefs

The following type definitions in OCCT has been modified to use C++11 types:
- *Standard_Boolean* is now *bool* (previously *unsigned int*).
- *Standard_ExtCharacter* is now *char16_t* (previously *short*).
- *Standard_ExtString;* is now *const char16_t* (previously *const short*).
- *Standard_Utf16Char* is now *char16_t* (previously *uint16_t* for compatibility with old compilers).
- *Standard_Utf32Char* is now *char32_t* (previously *uint32_t* for compatibility with old compilers).

For most applications this change should be transparent on the level of source code. Binary compatibility is not maintained, as *bool* has a different size in comparison with *unsigned int*.

@subsection upgrade_710_ffp Programmable Pipeline

Fixed-function pipeline has been already deprecated since OCCT 7.0.0.
Release 7.1.0 disables this functionality by default in favor of Programmable Pipeline (based on GLSL programs).

Method *V3d_View::Export()*, based on *gl2ps* library, requires fixed pipeline and will return error if used with default settings.
Applications should explicitly enable fixed pipeline by setting *OpenGl_Caps::ffpEnable* flag to TRUE within *OpenGl_GraphicDriver::ChangeOptions()* before creating the viewer to use *V3d_View::Export()*.
This method is declared as deprecated and will be removed in one of the the next OCCT releases.
The recommended way to generate a vector image of a 3D model or scene is to use an application-level solution independent from OpenGL.

@subsection upgrade_710_trsfpers Transformation persistence

The behavior of transformation persistence flags *Graphic3d_TMF_ZoomPers* and *Graphic3d_TMF_TriedronPers* has been changed for consistency with a textured fixed-size 2D text.
An object with these flags is considered as defined in pixel units, and the presentation is no more scaled depending on the view height.
The applications that need to scale such objects depending on viewport size should update them manually.

Flags *Graphic3d_TMF_PanPers* and *Graphic3d_TMF_FullPers* have been removed.
*Graphic3d_TMF_TriedronPers* or *Graphic3d_TMF_2d* can be used instead depending on the context.

*Graphic3d_TransModeFlags* is not an integer bitmask anymore - enumeration values should be specified instead.
Several transformation persistence methods in *PrsMgr_PresentableObject* have been marked deprecated.
Transformation persistence should be defined using  *Graphic3d_TransformPers* constructor directly and passed by a handle, not value.

@subsection upgrade_710_selprops Dynamic highlight and selection properties

Release 7.1.0 introduces *Graphic3d_HighlightStyle* - an entity that allows flexible customization of highlighting parameters (such as highlighting method, color, and transparency). Therefore, the signatures of the following methods related to highlighting:
- *AIS_InteractiveContext::Hilight()*;
- *AIS_InteractiveContext::HilightWithColor()*;
- *PrsMgr_PresentationManager::Color()*;
- *SelectMgr_EntityOwner::HilightWithColor()*;
have been changed to receive *Graphic3d_HighlightStyle* instead of *Quantity_Color*.

Method *AIS_InteractiveContext::Hilight* is now deprecated and highlights the interactive object with selection style.

A group of methods *AIS_InteractiveContext::IsHilighted* has changed its behavior - now they only check highlight flags of the object or the owner in the global status. If the highlight color is required on the application level, it is necessary to use overloaded methods *AIS_InteractiveContext::HighlightStyle* for the owner and the object.

The following methods have been replaced in *AIS_InteractiveContext* class:
- *HilightColor* and *SetHilightColor* by *HighlightStyle* and *SetHighlightStyle*;
- *SelectionColor* setter and getter by *SelectionStyle* and *SetSelectionStyle*.

The API of *Prs3d_Drawer* has been extended to allow setting up styles for both dynamic selection and highlighting. Therefore, it is possible to change the highlight style of a particular object on the application level via *SelectMgr_SelectableObject::HilightAttributes()* and process it in the entity owner.

@subsection upgrade_occt710_correction_of_TObj_Model Correction in TObj_Model class

Methods *TObj_Model::SaveAs* and *TObj_Model::Load* now receive *TCollection_ExtendedString* filename arguments instead of char*. UTF-16 encoding can be used to pass file names containing Unicode symbols.

@subsection upgrade_710_env Redundant environment variables

The following environment variables have become redundant:

* *CSF_UnitsLexicon* and *CSF_UnitsDefinition* are no more used.  Units definition (*UnitsAPI/Lexi_Expr.dat* and *UnitsAPI/Units.dat*) is now embedded into source code.
* *CSF_XSMessage* and *CSF_XHMessage* are now optional.
  English messages (XSMessage/*XSTEP.us* and SHMessage/*SHAPE.us*) are now embedded into source code
  and automatically loaded when environment variables are not set.
* *CSF_ShadersDirectory* is not required any more, though it still can be used to load custom shaders.
  Mandatory GLSL resources are now embedded into source code.
* *CSF_PluginDefaults* and other variables pointing to OCAF plugin resources (*CSF_StandardDefaults*, *CSF_XCAFDefaults*, *CSF_StandardLiteDefaults* and *CSF_XmlOcafResource*) are not necessary if method *TDocStd_Application::DefineFormat()* is used to enable persistence of OCAF documents.

Other environment variables still can be used to customize behavior of relevant algorithms but are not necessary any more (all required resources are embedded).

@subsection upgrade_710_removed Removed features

The following obsolete features have been removed:
* Anti-aliasing API *V3d_View::SetAntialiasingOn()*. This method was intended to activate deprecated OpenGL functionality *GL_POLYGON_SMOOTH, GL_LINE_SMOOTH* and *GL_POINT_SMOOTH*.
  Instead of the old API, the application should request MSAA buffers for anti-aliasing by assigning *Graphic3d_RenderingParams::NbMsaaSamples* property of the structure returned by *V3d_View::ChangeRenderingParams()*.
* *Prs3d_Drawer::ShadingAspectGlobal()* flag has been removed as not used. The corresponding calls can be removed safely from the application code.
* The methods managing ZClipping planes and ZCueing: *V3d_View::SetZClippingType()*, *V3d_View::SetZCueingOn()*, etc. have been removed.  ZClipping planes can be replaced by general-purpose clipping planes (the application should update plane definition manually).
* The 3D viewer printing API *V3d_View::Print()* has been removed. This functionality was available on Windows platforms only. The applications should use the general image dump API *V3d_View::ToPixMap()* and manage printing using a platform-specific API at the application level.
  Text resolution can be managed by rendering parameter *Graphic3d_RenderingParams::Resolution*, returned by *V3d_View::ChangeRenderingParams()*.
* Methods *PrsMgr_PresentationManager::BoundBox*, *PrsMgr_PresentationManager::Hilight* and *SelectMgr_EntityOwner::Hilight* have been removed as not used. The corresponding method in custom implementations of *SelectMgr_EntityOwner* can be removed safely. *PrsMgr_PresentationManager::Color* with the corresponding style must be used instead.
* Class *NCollection_QuickSort* has been removed. The code that used the tools provided by that class should be corrected manually. The recommended approach is to use sorting algorithms provided by STL (std::sort). See also @ref upgrade_occt700_sorttools above.

* Package *Dico*. The code that used the tools provided by that package should be corrected manually.  The recommended approach is to use *NCollection_DataMap* and *NCollection_IndexedDataMap* classes.

@subsection upgrade_710_changed_methods Other changes

The following classes have been changed:

* *BVH_Sorter* class has become abstract. The list of arguments of both  *Perform* methods has been changed and the methods became pure virtual.
* *Extrema_FuncExtPS* has been renamed to *Extrema_FuncPSNorm*.
* The default constructor and the constructor taking a point and a surface have been removed from class *Extrema_GenLocateExtPS*. Now the only constructor takes the surface and optional tolerances in U and V directions. The new method *Perform* takes the point with the start solution and processes it. The class has become not assignable and not copy-constructable.
* Constructors with arguments *(const gp_Ax22d& D, const gp_Pnt2d& F)* have been removed from *GCE2d_MakeParabola*, *gce_MakeParab2d* and *gp_Parab2d*.  The objects created with some constructors of class *gp_Parab2d*  may differ from the previous version (see the comments in *gp_Parab2d.hxx*). The result returned by *gp_Parab2d::Directrix()* method has an opposite direction in comparison with the previous OCCT versions.
* *BRepTools_Modifier* class now has two modes of work. They are defined by the boolean parameter *MutableInput*, which is turned off by default. This means that the algorithm always makes a copy of a sub-shape (e.g. vertex) if its tolerance is to be increased in the output shape. The old mode corresponds to *MutableInput* turned on. This change may impact an application if it implements a class derived from *BRepTools_Modifier*.
* The second parameter *theIsOuterWire* of method *ShapeAnalysis_Wire::CheckSmallArea* has been removed.
* In class *GeomPlate_CurveConstraint*, two constructors taking boundary curves of different types have been replaced with one constructor taking the curve of an abstract type.
*  The last optional argument *RemoveInvalidFaces* has been removed from the constructor of class  *BRepOffset_MakeOffset* and method *Initialize*.
* The public method *BOPDS_DS::VerticesOnIn* has been renamed into *SubShapesOnIn* and the new output parameter *theCommonPB* has been added.

@section upgrade_occt720 Upgrade to OCCT 7.2.0

@subsection upgrade_720_removed Removed features

The following obsolete features have been removed:
* *AIS_InteractiveContext::PreSelectionColor()*, *DefaultColor()*, *WasCurrentTouched()*, *ZDetection()*.
  These properties were unused, and therefore application should remove occurrences of these methods.
* *AIS_InteractiveObject::SelectionPriority()*.
  These property was not implemented.
* The class *LocOpe_HBuilder* has been removed as obsolete.
* The package *TestTopOpe* has been removed;
* The package *TestTopOpeDraw* has been removed;
* The package *TestTopOpeTools* has been removed.
* The packages *QANewModTopOpe*, *QANewBRepNaming* and *QANewDBRepNaming* have been removed as containing obsolete features.
* The following methods of the *IntPolyh_Triangle* class have been removed as unused:
  - *CheckCommonEdge*
  - *SetEdgeandOrientation*
  - *MultipleMiddleRefinement2*.
* The method *IntPolyh_Triangle::TriangleDeflection* has been renamed to *IntPolyh_Triangle::ComputeDeflection*.
* The following methods of the *IntPolyh_MaillageAffinage* class have been removed as unused:
  - *LinkEdges2Triangles*;
  - *TriangleEdgeContact2*;
  - *StartingPointsResearch2*;
  - *NextStartingPointsResearch2*;
  - *TriangleComparePSP*;
  - *StartPointsCalcul*.
* The method PerformAdvanced of the *ShapeConstruct_ProjectCurveOnSurface* class has been removed as unused.
* The method Perform of the *ShapeConstruct_ProjectCurveOnSurface* class is modified:
  - input arguments *continuity*, *maxdeg*, *nbinterval* have been removed as unused;
  - input arguments *TolFirst*, *TolLast* have been added at the end of arguments' list.
* The functionality to process shapes different only in orientation by different ways was removed from types *BRepTools_ReShape* and *ShapeBuild_ReShape*.

@subsection upgrade_occt720_correction_of_Offset_API Corrections in BRepOffset API

Class *BRepOffsetAPI_MakeOffsetShape*:
* *BRepOffsetAPI_MakeOffsetShape::BRepOffsetAPI_MakeOffsetShape()* - constructor with parameters has been deleted.
* *BRepOffsetAPI_MakeOffsetShape::PerformByJoin()* - method has been added. This method is old algorithm behaviour. 

The code below shows new calling procedure:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~{.cpp}
    BRepOffsetAPI_MakeOffsetShape OffsetMaker;
    OffsetMaker.PerformByJoin(Shape, OffsetValue, Tolerance);
    NewShape = OffsetMaker.Shape();
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Class *BRepOffsetAPI_MakeThickSolid*:
* *BRepOffsetAPI_MakeThickSolid::BRepOffsetAPI_MakeThickSolid()* - constructor with parameters has been deleted.
* *BRepOffsetAPI_MakeThickSolid::MakeThickSolidByJoin()* - method has been added. This method is old algorithm behaviour. 

The code below shows new calling procedure:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~{.cpp}
    BRepOffsetAPI_MakeThickSolid BodyMaker;
    BodyMaker.MakeThickSolidByJoin(myBody, facesToRemove, -myThickness / 50, 1.e-3);
    myBody = BodyMaker.Shape();
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

@subsection upgrade_720_highlight Highlight style

Management of highlight attributes has been revised and might require modifications from application side:
* New class *Graphic3d_PresentationAttributes* defining basic presentation attributes has been introduced.
  It's definition includes properties previously defined by class Graphic3d_HighlightStyle (*Color*, *Transparency*),
  and new properties (*Display mode*, *ZLayer*, optional *FillArea aspect*).
* Class *Prs3d_Drawer* now inherits class *Graphic3d_PresentationAttributes*.
  So that overall presentation attributes are now split into two parts - Basic attributes and Detailed attributes.
* Class *Graphic3d_HighlightStyle* has been dropped.
  It is now defined as a typedef to *Prs3d_Drawer*.
  Therefore, highlight style now also includes not only Basic presentation attributes, but also Detailed attributes
  which can be used by custom presentation builders.
* Highlighting style defined by class *Graphic3d_PresentationAttributes* now provides more options:
  - *Graphic3d_PresentationAttributes::BasicFillAreaAspect()* property providing complete Material definition.
    This option, when defined, can be used instead of the pair Object Material + Highlight Color.
  - *Graphic3d_PresentationAttributes::ZLayer()* property specifying the Layer where highlighted presentation should be shown.
    This property can be set to Graphic3d_ZLayerId_UNKNOWN, which means that ZLayer of main presentation should be used instead.
  - *Graphic3d_PresentationAttributes::DisplayMode()* property specifying Display Mode for highlight presentation.
* Since Highlight and Selection styles within *AIS_InteractiveContext* are now defined by *Prs3d_Drawer* inheriting from *Graphic3d_PresentationAttributes*,
  it is now possible to customize default highlight attributes like *Display Mode* and *ZLayer*, which previously could be defined only on Object level.
* Properties *Prs3d_Drawer::HighlightStyle()* and *Prs3d_Drawer::SelectionStyle()* have been removed.
  Instead, *AIS_InteractiveObject* now defines *DynamicHilightAttributes()* for dynamic highlighting in addition to *HilightAttributes()* used for highlighting in selected state.
* The following protected fields have been removed from class *AIS_InteractiveObject*:
  - *myOwnColor*, replaced by *myDrawer->Color()*
  - *myTransparency*, replaced by *myDrawer->Transparency()*
  - *myZLayer*, replaced by *myDrawer->ZLayer()*
* The method *PrsMgr_PresentationManager::Unhighlight()* taking Display Mode as an argument has been marked deprecated.
  Implementation now performs unhighlighting of all highlighted presentation mode.

@subsection upgrade_720_implicit_viewer_update Elimination of implicit 3D Viewer updates

Most AIS_InteractiveContext methods are defined with a flag to update viewer immediatly or not.
Within previous version of OCCT, this argument had default value TRUE.
While immediate viewer updates are useful for beginners (the result is displayed as soon as possible),
this approach is inefficent for batch viewer updates, and having default value as TRUE
leaded to non-intended accidential updates which are difficult to find.

To avoid such issues, the interface has been modified and default value has been removed.
Therefore, old application code should be updated to set the flag theToUpdateViewer explicitly
to desired value (TRUE to preserve old previous behavior), if it was not already set.

The follow AIS_InteractiveContext methods have been changed:
  Display, Erase, EraseAll, DisplayAll, EraseSelected, DisplaySelected, ClearPrs, Remove, RemoveAll, Hilight,
  HilightWithColor, Unhilight, Redisplay, RecomputePrsOnly, Update, SetDisplayMode, UnsetDisplayMode, SetColor,
  UnsetColor, SetWidth, UnsetWidth, SetMaterial, UnsetMaterial, SetTransparency, UnsetTransparency,
  SetLocalAttributes, UnsetLocalAttributes, SetPolygonOffsets, SetTrihedronSize, SetPlaneSize, SetPlaneSize,
  SetDeviationCoefficient, SetDeviationAngle, SetAngleAndDeviation, SetHLRDeviationCoefficient,
  SetHLRDeviationAngle, SetHLRAngleAndDeviation, SetSelectedAspect, MoveTo, Select, ShiftSelect, SetSelected,
  UpdateSelected, AddOrRemoveSelected, HilightSelected, UnhilightSelected, ClearSelected, ResetOriginalState,
  SubIntensityOn, SubIntensityOff, FitSelected, EraseGlobal, ClearGlobal, ClearGlobalPrs.

In addition, the API for immediate viewer update has been removed from V3d_View and Graphic3d_StructureManager classes
(enumerations *Aspect_TypeOfUpdate* and *V3d_TypeOfUpdate*):
  V3d::SetUpdateMode(), V3d::UpdateMode(), Graphic3d_StructureManager::SetUpdateMode(), Graphic3d_StructureManager::UpdateMode().

The argument theUpdateMode has been removed from methods Graphic3d_CView::Display(), Erase(), Update().
Method Graphic3d_CView::Update() does not redraw the view and does not re-compute structures anymore.

The following Grid management methods within class V3d_Viewer do not implicitly redraw the viewer:
  ActivateGrid, DeactivateGrid, SetRectangularGridValues, SetCircularGridValues,
  RectangularGridGraphicValues, CircularGridGraphicValues, SetPrivilegedPlane, DisplayPrivilegedPlane.

@subsection upgrade_720_v3d_colorname Elimination of Quantity_NameOfColor from TKV3d interface classes

The duplicating interface methods accepting *Quantity_NameOfColor* (in addition to methods accepting *Quantity_Color*) of TKV3d toolkit have been removed.
In most cases this change should be transparent, however applications implementing such interface methods should also remove them
(compiler will automatically highlight this issue for methods marked with Standard_OVERRIDE keyword).

@subsection upgrade_720_Result_Of_BOP_On_Containers Result of Boolean operations on containers

* The result of Boolean operations on arguments of collection types (WIRE/SHELL/COMPSOLID) is now filtered from duplicating containers.

@subsection upgrade_720_changes_methods Other changes

* Class GeomPlate_BuildPlateSurface accepts base class Adaptor3d_HCurve (instead of inherited Adaptor3d_HCurveOnSurface accepted earlier).
* Types GeomPlate_Array1OfHCurveOnSurface and GeomPlate_HArray1OfHCurveOnSurface have been replaced with GeomPlate_Array1OfHCurve and GeomPlate_HArray1OfHCurve correspondingly (accept base class Adaptor3d_HCurve instead of Adaptor3d_HCurveOnSurface).
* Enumeration *Image_PixMap::ImgFormat*, previously declared as nested enumeration within class *Image_PixMap*, has been moved to global namespace as *Image_Format* following OCCT coding rules.
  The enumeration values have suffix Image_Format_ and preserve previous name scheme for easy renaming of old values - e.g. Image_PixMap::ImgGray become Image_Format_Gray.
  Old definitions are preserved as depreacated aliases to the new ones;
* The method BOPAlgo_Builder::Origins() returns BOPCol_DataMapOfShapeListOfShape instead of BOPCol_DataMapOfShapeShape.
* The methods BOPDS_DS::IsToSort(const Handle(BOPDS_CommonBlock)&, Standard_Integer&) and BOPDS_DS::SortPaveBlocks(const Handle(BOPDS_CommonBlock)&) have been removed. The sorting is now performed during the addition of the Pave Blocks into Common Block.
* The methods BOPAlgo_Tools::MakeBlocks() and BOPAlgo_Tools::MakeBlocksCnx() have been replaced with the single template method BOPAlgo_Tools::MakeBlocks(). The chains of connected elements are now stored into the list of list instead of data map.
* The methods BOPAlgo_Tools::FillMap() have been replaced with the single template method BOPAlgo_Tools::FillMap().
* Package BVH now uses opencascade::handle instead of NCollection_Handle (for classes BVH_Properties, BVH_Builder, BVH_Tree, BVH_Object).
  Application code using BVH package directly should be updated accordingly.

@subsection upgrade_720_BOP_DataStructure BOP - Pairs of interfering indices

* The classes *BOPDS_PassKey* and *BOPDS_PassKeyBoolean* are too excessive and not used any more in Boolean Operations. To replace them the new *BOPDS_Pair* class has been implemented. Thus:
  - The method *BOPDS_DS::Interferences()* now returns the *BOPDS_MapOfPair*;
  - The method *BOPDS_Iterator::Value()* takes now only two parameters - the indices of interfering sub-shapes.

@subsection upgrade_720_Removal_Of_Old_Boolean_Operations_Draw Removal of the Draw commands based on old Boolean operations

* The commands *fubl* and *cubl* have been removed. The alternative for these commands are the commands *bfuseblend* and *bcutblend* respectively.
* The command *ksection* has been removed. The alternative for this command is the command *bsection*.

@subsection upgrade_720_Change_Of_FaceFace_Intersection Change of Face/Face intersection in Boolean operations

* Previously, the intersection tolerance for all section curves between pair of faces has been calculated as the maximal tolerance among all curves.
  Now, each curve has its own valid tolerance calculated as the maximal deviation of the 3D curve from its 2D curves or surfaces in case there are no 2D curves.
* The methods *IntTools_FaceFace::TolReached3d()*, *IntTools_FaceFace::TolReal()* and *IntTools_FaceFace::TolReached2d()* have been removed.
* Intersection tolerances of the curve can be obtained from the curve itself:
  - *IntTools_Curve::Tolerance()* - returns the valid tolerance for the curve;
  - *IntTools_Curve::TangentialTolerance()* - returns the tangential tolerance, which reflects the size of the common between faces.
* 2d tolerance (*IntTools_FaceFace::TolReached2d()*) has been completely removed from the algorithm as unused.


@subsection upgrade_720_persistence Restore OCCT 6.9.1 persistence
  
The capability of reading / writing files in old format using *Storage_ShapeSchema* functionality from OCCT 6.9.1 has been restored in OCCT 7.2.0. 

One can use this functionality in two ways:
- invoke DRAW Test Harness commands *fsdread / fsdwrite* for shapes;
- call *StdStorage* class *Read / Write* functions in custom code.

The code example below demonstrates how to read shapes from a storage driver using *StdStorage* class. 

~~~~
// aDriver should be created and opened for reading
Handle(StdStorage_Data) aData;

// Read data from the driver
// StdStorage::Read creates aData instance automatically if it is null
Storage_Error anError = StdStorage::Read(*aDriver, aData);
if (anError != Storage_VSOk)
{
  // Error processing
}

// Get root objects
Handle(StdStorage_RootData) aRootData = aData->RootData();
Handle(StdStorage_HSequenceOfRoots) aRoots = aRootData->Roots();
if (!aRoots.IsNull())
{
  // Iterator over the sequence of root objects
  for (StdStorage_HSequenceOfRoots::Iterator anIt(*aRoots); anIt.More(); anIt.Next())
  {
    Handle(StdStorage_Root)& aRoot = anIt.ChangeValue();
        // Get a persistent root's object
    Handle(StdObjMgt_Persistent) aPObject = aRoot->Object();
    if (!aPObject.IsNull())
    {
      Handle(ShapePersistent_TopoDS::HShape) aHShape = Handle(ShapePersistent_TopoDS::HShape)::DownCast(aPObject);
      if (aHShape) // Downcast to an expected type to import transient data
      {
        TopoDS_Shape aShape = aHShape->Import();
        shapes.Append(aShape);
      }
    }
  }
}
~~~~

The following code demonstrates how to write shapes in OCCT 7.2.0 using *StdStorage* class.

~~~~
// Create a file driver
NCollection_Handle<Storage_BaseDriver> aFileDriver(new FSD_File());

// Try to open the file driver for writing
try
{
  OCC_CATCH_SIGNALS
  PCDM_ReadWriter::Open(*aFileDriver, TCollection_ExtendedString(CStringA(filename).GetBuffer()), Storage_VSWrite);
}
catch (Standard_Failure& e)
{
  // Error processing
}

// Create a storage data instance
Handle(StdStorage_Data) aData = new StdStorage_Data;
// Set an axiliary application name (optional)
aData->HeaderData()->SetApplicationName(TCollection_ExtendedString("Application"));

// Provide a map to track sharing
StdObjMgt_TransientPersistentMap aMap;
// Iterator over a collection of shapes
for (Standard_Integer i = 1; i <= shapes.Length(); ++i)
{
  TopoDS_Shape aShape = shapes.Value(i);
  // Translate a shape to a persistent object
  Handle(ShapePersistent_TopoDS::HShape) aPShape =
    ShapePersistent_TopoDS::Translate(aShape, aMap, ShapePersistent_WithTriangle);
  if (aPShape.IsNull())
  {
    // Error processing
  }

  // Construct a root name
  TCollection_AsciiString aName = "Shape_";
  aName += i;

  // Add a root to storage data
  Handle(StdStorage_Root) aRoot = new StdStorage_Root(aName, aPShape);
  aData->RootData()->AddRoot(aRoot);
}

// Write storage data to the driver
Storage_Error anError = StdStorage::Write(*aFileDriver, aData);
if (anError != Storage_VSOk)
{
  // Error processing
}
~~~~

@subsection upgrade_720_Change_In_BRepLib_MakeFace_Algo Change in BRepLib_MakeFace algorithm

  Previously, *BRepLib_MakeFace* algorithm changed orientation of the source wire in order to avoid creation of face as a hole (i.e. it is impossible to create the entire face as a hole; the hole can be created in context of another face only). New algorithm does not reverse the wire if it is open. Material of the face for the open wire will be located on the left side from the source wire.

@subsection upgrade_720_Change_In_BRepFill_OffsetWire Change in BRepFill_OffsetWire algorithm

  From now on, the offset  will always be directed to the outer region in case of positive offset value and to the inner region in case of negative offset value.
  Inner/Outer region for an open wire is defined by the following rule:
    when we go along the wire (taking into account edges orientation) the outer region will be on the right side, the inner region will be on the left side.
  In case of a closed wire, the inner region will always be inside the wire (at that, the edges orientation is not taken into account).
  
@subsection upgrade_720_Change_In_GeomAdaptor_Curve Change in Geom(2d)Adaptor_Curve::IsPeriodic
  
Since 7.2.0 version, method *IsPeriodic()* returns the corresponding status of periodicity of the basis curve regardless of closure status of the adaptor curve (see method *IsClosed()*).
Method *IsClosed()* for adaptor can return false even on periodic curve, in the case if its parametric range is not full period, e.g. for adaptor on circle in range [0, @f$ \pi @f$].
In previous versions, *IsPeriodic()* always returned false if *IsClosed()* returned false.

@subsection upgrade_720_persistence Change in algorithm ShapeUpgrade_UnifySameDomain

The history of the changing of the initial shape was corrected:
* all shapes created by the algorithm are considered as modified shapes instead of generated ones;
* method Generated was removed and its calls should be replaced by calls of method History()->Modified.