| 1 | // Created on: 2015-08-11 |
| 2 | // Created by: Irina KRYLOVA |
| 3 | // Copyright (c) 2015 OPEN CASCADE SAS |
| 4 | // |
| 5 | // This file is part of Open CASCADE Technology software library. |
| 6 | // |
| 7 | // This library is free software; you can redistribute it and/or modify it under |
| 8 | // the terms of the GNU Lesser General Public License version 2.1 as published |
| 9 | // by the Free Software Foundation, with special exception defined in the file |
| 10 | // OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT |
| 11 | // distribution for complete text of the license and disclaimer of any warranty. |
| 12 | // |
| 13 | // Alternatively, this file may be used under the terms of Open CASCADE |
| 14 | // commercial license or contractual agreement. |
| 15 | |
| 16 | |
| 17 | #include <Interface_Check.hxx> |
| 18 | #include <Interface_EntityIterator.hxx> |
| 19 | #include <RWStepDimTol_RWGeoTolAndGeoTolWthDatRefAndUneqDisGeoTol.hxx> |
| 20 | #include <StepBasic_LengthMeasureWithUnit.hxx> |
| 21 | #include <StepBasic_MeasureWithUnit.hxx> |
| 22 | #include <StepData_StepReaderData.hxx> |
| 23 | #include <StepData_StepWriter.hxx> |
| 24 | #include <StepDimTol_DatumReference.hxx> |
| 25 | #include <StepDimTol_GeometricToleranceTarget.hxx> |
| 26 | #include <StepDimTol_GeometricToleranceType.hxx> |
| 27 | #include <StepDimTol_GeometricToleranceWithDatumReference.hxx> |
| 28 | #include <StepDimTol_GeoTolAndGeoTolWthDatRefAndUneqDisGeoTol.hxx> |
| 29 | #include <StepDimTol_HArray1OfDatumSystemOrReference.hxx> |
| 30 | #include <StepDimTol_UnequallyDisposedGeometricTolerance.hxx> |
| 31 | |
| 32 | //======================================================================= |
| 33 | //function : RWStepDimTol_RWGeoTolAndGeoTolWthDatRefAndUneqDisGeoTol |
| 34 | //purpose : |
| 35 | //======================================================================= |
| 36 | RWStepDimTol_RWGeoTolAndGeoTolWthDatRefAndUneqDisGeoTol::RWStepDimTol_RWGeoTolAndGeoTolWthDatRefAndUneqDisGeoTol() |
| 37 | { |
| 38 | } |
| 39 | |
| 40 | |
| 41 | //======================================================================= |
| 42 | //function : ReadStep |
| 43 | //purpose : |
| 44 | //======================================================================= |
| 45 | |
| 46 | void RWStepDimTol_RWGeoTolAndGeoTolWthDatRefAndUneqDisGeoTol::ReadStep |
| 47 | (const Handle(StepData_StepReaderData)& data, |
| 48 | const Standard_Integer num0, Handle(Interface_Check)& ach, |
| 49 | const Handle(StepDimTol_GeoTolAndGeoTolWthDatRefAndUneqDisGeoTol)& ent) const |
| 50 | { |
| 51 | Standard_Integer num = 0;//num0; |
| 52 | data->NamedForComplex("GEOMETRIC_TOLERANCE","GMTTLR",num0,num,ach); |
| 53 | if (!data->CheckNbParams(num,4,ach,"geometric_tolerance")) return; |
| 54 | // Own fields of GeometricTolerance |
| 55 | Handle(TCollection_HAsciiString) aName; |
| 56 | data->ReadString (num, 1, "name", ach, aName); |
| 57 | Handle(TCollection_HAsciiString) aDescription; |
| 58 | data->ReadString (num, 2, "description", ach, aDescription); |
| 59 | Handle(StepBasic_MeasureWithUnit) aMagnitude; |
| 60 | data->ReadEntity (num, 3, "magnitude", ach, STANDARD_TYPE(StepBasic_MeasureWithUnit), aMagnitude); |
| 61 | StepDimTol_GeometricToleranceTarget aTolerancedShapeAspect; |
| 62 | data->ReadEntity (num, 4, "toleranced_shape_aspect", ach, aTolerancedShapeAspect); |
| 63 | |
| 64 | data->NamedForComplex("GEOMETRIC_TOLERANCE_WITH_DATUM_REFERENCE","GTWDR",num0,num,ach); |
| 65 | // Own fields of GeometricToleranceWithDatumReference |
| 66 | Handle(StepDimTol_HArray1OfDatumSystemOrReference) aDatumSystem; |
| 67 | Standard_Integer sub5 = 0; |
| 68 | if ( data->ReadSubList (num, 1, "datum_system", ach, sub5) ) { |
| 69 | Standard_Integer nb0 = data->NbParams(sub5); |
| 70 | aDatumSystem = new StepDimTol_HArray1OfDatumSystemOrReference (1, nb0); |
| 71 | Standard_Integer num2 = sub5; |
| 72 | for ( Standard_Integer i0=1; i0 <= nb0; i0++ ) { |
| 73 | StepDimTol_DatumSystemOrReference anIt0; |
| 74 | data->ReadEntity (num2, i0, "datum_system_or_reference", ach, anIt0); |
| 75 | aDatumSystem->SetValue(i0, anIt0); |
| 76 | } |
| 77 | } |
| 78 | // Initialize entity |
| 79 | Handle(StepDimTol_GeometricToleranceWithDatumReference) aGTWDR = |
| 80 | new StepDimTol_GeometricToleranceWithDatumReference; |
| 81 | aGTWDR->SetDatumSystem(aDatumSystem); |
| 82 | |
| 83 | data->NamedForComplex("UNEQUALLY_DISPOSED_GEOMETRIC_TOLERANCE", num0, num, ach); |
| 84 | Handle (StepBasic_LengthMeasureWithUnit) aDisplacement; |
| 85 | data->ReadEntity(num, 1, "displacement", ach, STANDARD_TYPE(StepBasic_LengthMeasureWithUnit), aDisplacement); |
| 86 | //Initialize entity |
| 87 | Handle(StepDimTol_UnequallyDisposedGeometricTolerance) anUDGT = new |
| 88 | StepDimTol_UnequallyDisposedGeometricTolerance; |
| 89 | anUDGT->SetDisplacement(aDisplacement); |
| 90 | |
| 91 | //Choose type of geometric tolerance |
| 92 | TColStd_SequenceOfAsciiString aTypes; |
| 93 | data->ComplexType(num0, aTypes); |
| 94 | Standard_CString aFirst = aTypes.First().ToCString(); |
| 95 | Standard_CString aLast = aTypes.Value(3).ToCString(); |
| 96 | StepDimTol_GeometricToleranceType aType = StepDimTol_GTTPositionTolerance; |
| 97 | if (strcmp(aFirst, "ANGULARITY_TOLERANCE") == 0) aType = StepDimTol_GTTAngularityTolerance; |
| 98 | else if (strcmp(aFirst, "CIRCULAR_RUNOUT_TOLERANCE") == 0) aType = StepDimTol_GTTCircularRunoutTolerance; |
| 99 | else if (strcmp(aFirst, "COAXIALITY_TOLERANCE") == 0) aType = StepDimTol_GTTCoaxialityTolerance; |
| 100 | else if (strcmp(aFirst, "CONCENTRICITY_TOLERANCE") == 0) aType = StepDimTol_GTTConcentricityTolerance; |
| 101 | else if (strcmp(aFirst, "CYLINDRICITY_TOLERANCE") == 0) aType = StepDimTol_GTTCylindricityTolerance; |
| 102 | else if (strcmp(aFirst, "FLATNESS_TOLERANCE") == 0) aType = StepDimTol_GTTFlatnessTolerance; |
| 103 | else if (strcmp(aLast, "LINE_PROFILE_TOLERANCE") == 0) aType = StepDimTol_GTTLineProfileTolerance; |
| 104 | else if (strcmp(aLast, "PARALLELISM_TOLERANCE") == 0) aType = StepDimTol_GTTParallelismTolerance; |
| 105 | else if (strcmp(aLast, "PERPENDICULARITY_TOLERANCE") == 0) aType = StepDimTol_GTTPerpendicularityTolerance; |
| 106 | else if (strcmp(aLast, "POSITION_TOLERANCE") == 0) aType = StepDimTol_GTTPositionTolerance; |
| 107 | else if (strcmp(aLast, "ROUNDNESS_TOLERANCE") == 0) aType = StepDimTol_GTTRoundnessTolerance; |
| 108 | else if (strcmp(aLast, "STRAIGHTNESS_TOLERANCE") == 0) aType = StepDimTol_GTTStraightnessTolerance; |
| 109 | else if (strcmp(aLast, "SURFACE_PROFILE_TOLERANCE") == 0) aType = StepDimTol_GTTSurfaceProfileTolerance; |
| 110 | else if (strcmp(aLast, "SYMMETRY_TOLERANCE") == 0) aType = StepDimTol_GTTSymmetryTolerance; |
| 111 | else if (strcmp(aLast, "TOTAL_RUNOUT_TOLERANCE") == 0) aType = StepDimTol_GTTTotalRunoutTolerance; |
| 112 | else ach->AddFail("The type of geometric tolerance is not supported"); |
| 113 | |
| 114 | // Initialize entity |
| 115 | ent->Init(aName, aDescription, aMagnitude, aTolerancedShapeAspect, aGTWDR, aType, anUDGT); |
| 116 | } |
| 117 | |
| 118 | |
| 119 | //======================================================================= |
| 120 | //function : WriteStep |
| 121 | //purpose : |
| 122 | //======================================================================= |
| 123 | |
| 124 | void RWStepDimTol_RWGeoTolAndGeoTolWthDatRefAndUneqDisGeoTol::WriteStep |
| 125 | (StepData_StepWriter& SW, |
| 126 | const Handle(StepDimTol_GeoTolAndGeoTolWthDatRefAndUneqDisGeoTol)& ent) const |
| 127 | { |
| 128 | StepDimTol_GeometricToleranceType aType = ent->GetToleranceType(); |
| 129 | if (aType == StepDimTol_GTTAngularityTolerance) |
| 130 | SW.StartEntity("ANGULARITY_TOLERANCE"); |
| 131 | else if (aType == StepDimTol_GTTCircularRunoutTolerance) |
| 132 | SW.StartEntity("CIRCULAR_RUNOUT_TOLERANCE"); |
| 133 | else if (aType == StepDimTol_GTTCoaxialityTolerance) |
| 134 | SW.StartEntity("COAXIALITY_TOLERANCE"); |
| 135 | else if (aType == StepDimTol_GTTConcentricityTolerance) |
| 136 | SW.StartEntity("CONCENTRICITY_TOLERANCE"); |
| 137 | else if (aType == StepDimTol_GTTCylindricityTolerance) |
| 138 | SW.StartEntity("CYLINDRICITY_TOLERANCE"); |
| 139 | else if (aType == StepDimTol_GTTFlatnessTolerance) |
| 140 | SW.StartEntity("FLATNESS_TOLERANCE"); |
| 141 | |
| 142 | SW.StartEntity("GEOMETRIC_TOLERANCE"); |
| 143 | SW.Send(ent->Name()); |
| 144 | SW.Send(ent->Description()); |
| 145 | SW.Send(ent->Magnitude()); |
| 146 | SW.Send(ent->TolerancedShapeAspect().Value()); |
| 147 | SW.StartEntity("GEOMETRIC_TOLERANCE_WITH_DATUM_REFERENCE"); |
| 148 | SW.OpenSub(); |
| 149 | for(Standard_Integer i4=1; i4<=ent->GetGeometricToleranceWithDatumReference()->DatumSystemAP242()->Length(); i4++) { |
| 150 | StepDimTol_DatumSystemOrReference Var0 = |
| 151 | ent->GetGeometricToleranceWithDatumReference()->DatumSystemAP242()->Value(i4); |
| 152 | SW.Send(Var0.Value()); |
| 153 | } |
| 154 | SW.CloseSub(); |
| 155 | |
| 156 | if (aType == StepDimTol_GTTLineProfileTolerance) |
| 157 | SW.StartEntity("LINE_PROFILE_TOLERANCE"); |
| 158 | else if (aType == StepDimTol_GTTParallelismTolerance) |
| 159 | SW.StartEntity("PARALLELISM_TOLERANCE"); |
| 160 | else if (aType == StepDimTol_GTTPerpendicularityTolerance) |
| 161 | SW.StartEntity("PERPENDICULARITY_TOLERANCE"); |
| 162 | else if (aType == StepDimTol_GTTPositionTolerance) |
| 163 | SW.StartEntity("POSITION_TOLERANCE"); |
| 164 | else if (aType == StepDimTol_GTTRoundnessTolerance) |
| 165 | SW.StartEntity("ROUNDNESS_TOLERANCE"); |
| 166 | else if (aType == StepDimTol_GTTStraightnessTolerance) |
| 167 | SW.StartEntity("STRAIGHTNESS_TOLERANCE"); |
| 168 | else if (aType == StepDimTol_GTTSurfaceProfileTolerance) |
| 169 | SW.StartEntity("SURFACE_PROFILE_TOLERANCE"); |
| 170 | else if (aType == StepDimTol_GTTSymmetryTolerance) |
| 171 | SW.StartEntity("SYMMETRY_TOLERANCE"); |
| 172 | else if (aType == StepDimTol_GTTTotalRunoutTolerance) |
| 173 | SW.StartEntity("TOTAL_RUNOUT_TOLERANCE"); |
| 174 | |
| 175 | SW.StartEntity("UNEQUALLY_DISPOSED_GEOMETRIC_TOLRANCE"); |
| 176 | SW.Send(ent->GetUnequallyDisposedGeometricTolerance()->Displacement()); |
| 177 | } |
| 178 | |
| 179 | |
| 180 | //======================================================================= |
| 181 | //function : Share |
| 182 | //purpose : |
| 183 | //======================================================================= |
| 184 | |
| 185 | void RWStepDimTol_RWGeoTolAndGeoTolWthDatRefAndUneqDisGeoTol::Share |
| 186 | (const Handle(StepDimTol_GeoTolAndGeoTolWthDatRefAndUneqDisGeoTol)& ent, |
| 187 | Interface_EntityIterator& iter) const |
| 188 | { |
| 189 | // Own fields of GeometricTolerance |
| 190 | iter.AddItem (ent->Magnitude()); |
| 191 | iter.AddItem (ent->TolerancedShapeAspect().Value()); |
| 192 | // Own fields of GeometricToleranceWithDatumReference |
| 193 | for (Standard_Integer i3=1; i3<=ent->GetGeometricToleranceWithDatumReference()->DatumSystemAP242()->Length(); i3++ ) { |
| 194 | StepDimTol_DatumSystemOrReference Var0 = ent->GetGeometricToleranceWithDatumReference()->DatumSystemAP242()->Value(i3); |
| 195 | iter.AddItem (Var0.Value()); |
| 196 | } |
| 197 | } |