| 1 | // Created on: 2002-06-17 |
| 2 | // Created by: QA Admin |
| 3 | // Copyright (c) 2002-2012 OPEN CASCADE SAS |
| 4 | // |
| 5 | // The content of this file is subject to the Open CASCADE Technology Public |
| 6 | // License Version 6.5 (the "License"). You may not use the content of this file |
| 7 | // except in compliance with the License. Please obtain a copy of the License |
| 8 | // at http://www.opencascade.org and read it completely before using this file. |
| 9 | // |
| 10 | // The Initial Developer of the Original Code is Open CASCADE S.A.S., having its |
| 11 | // main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France. |
| 12 | // |
| 13 | // The Original Code and all software distributed under the License is |
| 14 | // distributed on an "AS IS" basis, without warranty of any kind, and the |
| 15 | // Initial Developer hereby disclaims all such warranties, including without |
| 16 | // limitation, any warranties of merchantability, fitness for a particular |
| 17 | // purpose or non-infringement. Please see the License for the specific terms |
| 18 | // and conditions governing the rights and limitations under the License. |
| 19 | |
| 20 | |
| 21 | #include <QABUC.hxx> |
| 22 | #ifdef HAVE_CONFIG_H |
| 23 | #include <config.h> |
| 24 | #endif |
| 25 | #include<Draw_Interpretor.hxx> |
| 26 | #include<TopLoc_Location.hxx> |
| 27 | #include<TopoDS_Face.hxx> |
| 28 | #include<TopoDS.hxx> |
| 29 | #include<DBRep.hxx> |
| 30 | #include<Geom_Surface.hxx> |
| 31 | #include<BRep_Tool.hxx> |
| 32 | #include<GeomInt_IntSS.hxx> |
| 33 | #include<BRepBuilderAPI_MakeEdge.hxx> |
| 34 | #include <Standard_ErrorHandler.hxx> |
| 35 | #include<tcl.h> |
| 36 | |
| 37 | static int BUC60623(Draw_Interpretor& di, Standard_Integer argc, const char ** a) |
| 38 | { |
| 39 | if(argc!=4) |
| 40 | { |
| 41 | di << "Usage : " << a[0] << " result Shape1 Shape2" << "\n"; |
| 42 | return -1; |
| 43 | } |
| 44 | |
| 45 | TopLoc_Location L1; |
| 46 | TopLoc_Location L2; |
| 47 | TopoDS_Face F1 = TopoDS::Face(DBRep::Get(a[2],TopAbs_FACE)); |
| 48 | TopoDS_Face F2 = TopoDS::Face(DBRep::Get(a[3],TopAbs_FACE)); |
| 49 | Handle(Geom_Surface) GSF1 = BRep_Tool::Surface(F1, L1); |
| 50 | Handle(Geom_Surface) GSF2 = BRep_Tool::Surface(F2, L2); |
| 51 | GeomInt_IntSS Inter; |
| 52 | Inter.Perform(GSF1,GSF2, BRep_Tool::Tolerance(F1)); |
| 53 | if (!Inter.IsDone()) { |
| 54 | di << "Intersection not done" << "\n"; |
| 55 | return 1; |
| 56 | } |
| 57 | Standard_Integer nbsol = Inter.NbLines(); |
| 58 | if(!nbsol) { |
| 59 | di << "The number of solutions is zero!" << "\n"; |
| 60 | return 0; |
| 61 | } |
| 62 | Handle(Geom_Curve) Sol = Inter.Line(1); |
| 63 | if(!Sol.IsNull()) { |
| 64 | DBRep::Set(a[1], BRepBuilderAPI_MakeEdge(Sol)); |
| 65 | return 0; |
| 66 | } else di << "The first solution is Null!" << "\n"; |
| 67 | |
| 68 | di << "fini" << "\n"; |
| 69 | return 0; |
| 70 | } |
| 71 | |
| 72 | #include<ViewerTest.hxx> |
| 73 | #include<AIS_InteractiveContext.hxx> |
| 74 | #include<AIS_Shape.hxx> |
| 75 | |
| 76 | static int BUC60569(Draw_Interpretor& di, Standard_Integer argc, const char ** argv) |
| 77 | { |
| 78 | if(argc!=2) |
| 79 | { |
| 80 | di << "Usage : " << argv[0] << " shape" << "\n"; |
| 81 | return -1; |
| 82 | } |
| 83 | |
| 84 | Handle(AIS_InteractiveContext) myAISContext = ViewerTest::GetAISContext(); |
| 85 | if(myAISContext.IsNull()) { |
| 86 | di << "use 'vinit' command before " << argv[0] << "\n"; |
| 87 | return -1; |
| 88 | } |
| 89 | |
| 90 | TopoDS_Shape theShape = DBRep::Get(argv[1]); |
| 91 | |
| 92 | Handle(AIS_Shape) anAISShape = new AIS_Shape( theShape ); |
| 93 | myAISContext->Display( anAISShape, Standard_True ); |
| 94 | myAISContext->OpenLocalContext(); |
| 95 | myAISContext->ActivateStandardMode(TopAbs_FACE); |
| 96 | return 0; |
| 97 | } |
| 98 | |
| 99 | static int BUC60614(Draw_Interpretor& di, Standard_Integer argc, const char ** argv) |
| 100 | { |
| 101 | if(argc!=2) |
| 102 | { |
| 103 | di << "Usage : "<< argv[0] << " shape" << "\n"; |
| 104 | return -1; |
| 105 | } |
| 106 | |
| 107 | // di.Eval("vinit"); |
| 108 | |
| 109 | TopoDS_Shape theShape = DBRep::Get(argv[1]); |
| 110 | |
| 111 | // ViewerTest::GetAISContext(); |
| 112 | Handle(AIS_InteractiveContext) myAISContext = ViewerTest::GetAISContext(); |
| 113 | if(myAISContext.IsNull()) { |
| 114 | di << "use 'vinit' command before " << argv[0] << "\n"; |
| 115 | return -1; |
| 116 | } |
| 117 | Handle(AIS_Shape) anAISShape = new AIS_Shape( theShape ); |
| 118 | myAISContext->Display( anAISShape, Standard_True ); |
| 119 | myAISContext->OpenLocalContext(); |
| 120 | myAISContext->ActivateStandardMode(TopAbs_COMPOUND); |
| 121 | // myAISContext->ActivateStandardMode(TopAbs_SOLID); |
| 122 | // di.Eval("vfit"); |
| 123 | // cout << "vfini" << endl; |
| 124 | return 0; |
| 125 | } |
| 126 | |
| 127 | #include<BRep_Builder.hxx> |
| 128 | #include<BRepTools_ShapeSet.hxx> |
| 129 | #include<BRepTools.hxx> |
| 130 | #include<BRepAdaptor_HSurface.hxx> |
| 131 | #include<TopOpeBRep_PointClassifier.hxx> |
| 132 | #include<Precision.hxx> |
| 133 | #ifdef WNT |
| 134 | #include<stdio.h> |
| 135 | #endif |
| 136 | |
| 137 | static int BUC60609(Draw_Interpretor& di, Standard_Integer argc, const char ** argv) { |
| 138 | // char file1[100]; |
| 139 | gp_Pnt2d uvSurf; |
| 140 | double U,V; |
| 141 | TopAbs_State state; |
| 142 | |
| 143 | if(argc < 2){ |
| 144 | printf("Usage: %s draw_format_face\n [name] [interactive (0|1)]",argv[0]); |
| 145 | return(-1); |
| 146 | } |
| 147 | |
| 148 | // MKV 30.03.05 |
| 149 | #if ((TCL_MAJOR_VERSION > 8) || ((TCL_MAJOR_VERSION == 8) && (TCL_MINOR_VERSION >= 4))) && !defined(USE_NON_CONST) |
| 150 | const Standard_Character *DD = Tcl_GetVar(di.Interp(),"Draw_DataDir",TCL_GLOBAL_ONLY); |
| 151 | #else |
| 152 | Standard_Character *DD = Tcl_GetVar(di.Interp(),"Draw_DataDir",TCL_GLOBAL_ONLY); |
| 153 | #endif |
| 154 | |
| 155 | Standard_Character *file1 = new Standard_Character [strlen(DD)+strlen(argv[1])+2]; |
| 156 | sprintf(file1,"%s/%s",DD,argv[1]); |
| 157 | |
| 158 | filebuf fic; |
| 159 | istream in(&fic); |
| 160 | if (!fic.open(file1,ios::in)) { |
| 161 | di << "Cannot open file for reading : " << file1 << "\n"; |
| 162 | delete file1; |
| 163 | return(-1); |
| 164 | } |
| 165 | |
| 166 | TopoDS_Shape theShape; |
| 167 | char typ[255]; |
| 168 | in >> typ; |
| 169 | if (!in.fail()) { |
| 170 | if( !strcmp(typ, "DBRep_DrawableShape") ){ |
| 171 | BRep_Builder B; |
| 172 | BRepTools_ShapeSet S(B); |
| 173 | S.Read(in); |
| 174 | S.Read(theShape,in); |
| 175 | }else{ |
| 176 | di << "Wrong entity type in " << file1 << "\n"; |
| 177 | delete file1; |
| 178 | return(-1); |
| 179 | } |
| 180 | } |
| 181 | |
| 182 | const TopoDS_Face &face = TopoDS::Face (theShape); |
| 183 | |
| 184 | if(argc > 2){ |
| 185 | DBRep::Set(argv[2],face); |
| 186 | } |
| 187 | |
| 188 | Standard_Boolean inter=Standard_False ; |
| 189 | |
| 190 | if(argc > 3){ |
| 191 | inter= (atof(argv[3]) == 0) ? Standard_False : Standard_True ; |
| 192 | } |
| 193 | |
| 194 | Standard_Real faceUMin,faceUMax,faceVMin,faceVMax; |
| 195 | |
| 196 | BRepTools::UVBounds (face, faceUMin,faceUMax,faceVMin,faceVMax); |
| 197 | |
| 198 | di << "The bounds of the trimmed face:" << "\n"; |
| 199 | di << faceUMin << " <= U <= " << faceUMax << "\n"; |
| 200 | di << faceVMin << " <= V <= " << faceVMax << "\n"; |
| 201 | |
| 202 | Handle(BRepAdaptor_HSurface) hsurfa = new BRepAdaptor_HSurface(face); |
| 203 | |
| 204 | TopOpeBRep_PointClassifier PClass; |
| 205 | |
| 206 | di << "Now test the point classifier by inputting U,V values" << "\n"; |
| 207 | di << "inside or outside the bounds displayed above" << "\n"; |
| 208 | di << "Type stop to exit" << "\n"; |
| 209 | |
| 210 | // Please register this: |
| 211 | // *********************************************** |
| 212 | // Note also that for periodic surfaces such as nimpod_1.topo, |
| 213 | // the U/V values may be +- 2pi compared to the actual face bounds |
| 214 | // (because U,V is probably coming from a Geom package routine). |
| 215 | // Hence IT WOULD BE USEFUL IF TopOpeBRep_PointClassifier COULD |
| 216 | // COPE WITH PERIODIC SURFACES, i.e. U,V +-Period giving same result. |
| 217 | // ************************************************* |
| 218 | if(inter && (argc != 6)) { |
| 219 | // while(cin){ |
| 220 | di << "Input U: " << "\n"; |
| 221 | // cin >> U; |
| 222 | // if(!cin) { |
| 223 | delete file1; |
| 224 | return(0); |
| 225 | // } |
| 226 | di << "Input V: " << "\n"; |
| 227 | // cin >> V; |
| 228 | // if(!cin) { |
| 229 | delete file1; |
| 230 | return(0); |
| 231 | // } |
| 232 | |
| 233 | uvSurf = gp_Pnt2d(U, V); |
| 234 | |
| 235 | //gp_Pnt2d uvSurf(0.14,5.1); // outside!!! |
| 236 | //gp_Pnt2d uvSurf2(1.28,5.1); // inside |
| 237 | |
| 238 | state = PClass.Classify(face,uvSurf,Precision::PConfusion()); |
| 239 | if(state == TopAbs_IN || state == TopAbs_ON){ |
| 240 | di << "U=" << U << " V=" << V << " classified INSIDE" << "\n"; |
| 241 | }else{ |
| 242 | di << "U=" << U << " V=" << V << " classified OUTSIDE" << "\n"; |
| 243 | } |
| 244 | // } |
| 245 | } else { |
| 246 | if(argc != 6) { |
| 247 | uvSurf = gp_Pnt2d(0.14,5.1); |
| 248 | state = PClass.Classify(face,uvSurf,Precision::PConfusion()); |
| 249 | if(state == TopAbs_IN || state == TopAbs_ON){ |
| 250 | di << "U=" << 0.14 << " V=" << 5.1 << " classified INSIDE" << "\n"; |
| 251 | }else{ |
| 252 | di << "U=" << 0.14 << " V=" << 5.1 << " classified OUTSIDE" << "\n"; |
| 253 | } |
| 254 | |
| 255 | uvSurf = gp_Pnt2d(1.28,5.1); |
| 256 | state = PClass.Classify(face,uvSurf,Precision::PConfusion()); |
| 257 | if(state == TopAbs_IN || state == TopAbs_ON){ |
| 258 | di << "U=" << 1.28 << " V=" << 5.1 << " classified INSIDE" << "\n"; |
| 259 | }else{ |
| 260 | di << "U=" << 1.28 << " V=" << 5.1 << " classified OUTSIDE" << "\n"; |
| 261 | } |
| 262 | } else { |
| 263 | uvSurf = gp_Pnt2d(atof(argv[4]),atof(argv[5])); |
| 264 | state = PClass.Classify(face,uvSurf,Precision::PConfusion()); |
| 265 | if(state == TopAbs_IN || state == TopAbs_ON){ |
| 266 | di << "U=" << atof(argv[4]) << " V=" << atof(argv[5]) << " classified INSIDE" << "\n"; |
| 267 | }else{ |
| 268 | di << "U=" << atof(argv[4]) << " V=" << atof(argv[5]) << " classified OUTSIDE" << "\n"; |
| 269 | } |
| 270 | } |
| 271 | } |
| 272 | return 0; |
| 273 | } |
| 274 | |
| 275 | #if ! defined(WNT) |
| 276 | void stringerror(int state) |
| 277 | { |
| 278 | printf("%s",((state&ios::eofbit) !=0)? " [eof]": ""); |
| 279 | printf("%s",((state&ios::failbit)!=0)? " [fail]":""); |
| 280 | printf("%s",((state&ios::badbit) !=0)? " [bad]": ""); |
| 281 | printf("%s\n",(state==ios::goodbit)? " [ok]": ""); |
| 282 | } |
| 283 | |
| 284 | |
| 285 | //#if defined(LIN) |
| 286 | //#include <strstream> |
| 287 | //#else |
| 288 | //#include <strstream.h> |
| 289 | //#endif |
| 290 | #ifdef HAVE_IOSTREAM |
| 291 | #include <iostream> |
| 292 | #include <sstream> |
| 293 | using namespace std; |
| 294 | #elif defined (HAVE_IOSTREAM_H) |
| 295 | #include <iostream.h> |
| 296 | #include <strstream.h> |
| 297 | #else |
| 298 | #error "check config.h file or compilation options: either HAVE_IOSTREAM or HAVE_IOSTREAM_H should be defined" |
| 299 | #endif |
| 300 | static int UKI61075(Draw_Interpretor& /*di*/, Standard_Integer /*argc*/, const char ** /*argv*/) { |
| 301 | double da,db; |
| 302 | char buffer1[128]; |
| 303 | #ifndef USE_STL_STREAM |
| 304 | ostrstream stringout1(buffer1,sizeof(buffer1)); |
| 305 | istrstream stringin1(buffer1,sizeof(buffer1)); |
| 306 | #else |
| 307 | ostringstream stringout1(buffer1); |
| 308 | istringstream stringin1(buffer1); |
| 309 | #endif |
| 310 | char buffer2[128]; |
| 311 | #ifndef USE_STL_STREAM |
| 312 | ostrstream stringout2(buffer2,sizeof(buffer2)); |
| 313 | istrstream stringin2(buffer2,sizeof(buffer2)); |
| 314 | #else |
| 315 | ostringstream stringout2(buffer1); |
| 316 | istringstream stringin2(buffer1); |
| 317 | #endif |
| 318 | |
| 319 | stringout1.precision(17); |
| 320 | stringout2.precision(17); |
| 321 | |
| 322 | da=-(DBL_MAX); |
| 323 | db=DBL_MAX; |
| 324 | printf("Valeurs originales :\n\t%.17lg %.17lg\n",da,db); |
| 325 | |
| 326 | stringout1<<da<<' '<<db<<"\n"; |
| 327 | #ifndef USE_STL_STREAM |
| 328 | buffer1[stringout1.pcount()]='\0'; |
| 329 | #else |
| 330 | buffer1[stringout1.str().length()]= '\0' ; |
| 331 | #endif |
| 332 | |
| 333 | printf("Valeurs ecrites dans le fichier :\n\t%s",buffer1); |
| 334 | |
| 335 | da=db=0.; |
| 336 | stringin1>>da>>db; |
| 337 | printf("Valeurs relues :\n\t%.17lg %.17lg",da,db); |
| 338 | stringerror(stringin1.rdstate()); |
| 339 | |
| 340 | stringout2<<da<<' '<<db<<"\n"; |
| 341 | #ifndef USE_STL_STREAM |
| 342 | buffer2[stringout2.pcount()]='\0'; |
| 343 | #else |
| 344 | buffer2[stringout2.str().length()]='\0'; |
| 345 | #endif |
| 346 | |
| 347 | printf("Valeurs reecrites :\n\t%s",buffer2); |
| 348 | |
| 349 | da=db=0.; |
| 350 | stringin2>>da>>db; |
| 351 | printf("Valeurs relues a nouveau :\n\t%.17lg %.17lg",da,db); |
| 352 | stringerror(stringin2.rdstate()); |
| 353 | |
| 354 | return(0); |
| 355 | } |
| 356 | #endif |
| 357 | |
| 358 | #include<BRepAlgoAPI_Section.hxx> |
| 359 | #include<BRepAlgo_Section.hxx> |
| 360 | |
| 361 | #include<Geom_Plane.hxx> |
| 362 | #include<DrawTrSurf.hxx> |
| 363 | |
| 364 | //static Standard_CString St = " \"trimsphere\"/\"sphere\" [result] [name] [plane]"; |
| 365 | static Standard_CString St = " \"trimsphere\"/\"sphere\" [result] [name] [plane] [BRepAlgoAPI/BRepAlgo = 1/0]"; |
| 366 | |
| 367 | static int BUC60585(Draw_Interpretor& di, Standard_Integer argc, const char ** argv) { |
| 368 | |
| 369 | //if(argc<2) { |
| 370 | // cerr << "Usage : " << argv[0] << St << endl; |
| 371 | // return -1; |
| 372 | //} |
| 373 | if(argc < 2 || argc > 6) { |
| 374 | di << "Usage : " << argv[0] << " shape1 shape2 shape3 shape4 shape5 shape6 [BRepAlgoAPI/BRepAlgo = 1/0]" << "\n"; |
| 375 | return 1; |
| 376 | } |
| 377 | Standard_Boolean IsBRepAlgoAPI = Standard_True; |
| 378 | if (argc == 6) { |
| 379 | Standard_Integer IsB = atoi(argv[5]); |
| 380 | if (IsB != 1) { |
| 381 | IsBRepAlgoAPI = Standard_False; |
| 382 | #if ! defined(BRepAlgo_def04) |
| 383 | // di << "Error: There is not BRepAlgo_Section class" << "\n"; |
| 384 | // return 1; |
| 385 | #endif |
| 386 | } |
| 387 | } |
| 388 | |
| 389 | |
| 390 | gp_Dir N; |
| 391 | if(!strcmp(argv[1],"trimsphere")) { |
| 392 | ////////////////////////////////////////// |
| 393 | // Uncomment for trimmed sphere bug: |
| 394 | // filename = "trimsphere.topo"; |
| 395 | N=gp_Dir( 0.0, -1.0, 0.0 ); |
| 396 | ////////////////////////////////////////// |
| 397 | } else if(!strcmp(argv[1],"sphere")) { |
| 398 | |
| 399 | ////////////////////////////////////////// |
| 400 | // Uncomment for untrimmed sphere bug: |
| 401 | |
| 402 | // filename="sphere.topo"; |
| 403 | N=gp_Dir( 0.0, -0.75103523489975432, -0.66026212668838646 ); |
| 404 | |
| 405 | ////////////////////////////////////////// |
| 406 | } else { |
| 407 | di << "Usage : " << argv[0] << St << "\n"; |
| 408 | return -1; |
| 409 | } |
| 410 | |
| 411 | // MKV 30.03.05 |
| 412 | #if ((TCL_MAJOR_VERSION > 8) || ((TCL_MAJOR_VERSION == 8) && (TCL_MINOR_VERSION >= 4))) && !defined(USE_NON_CONST) |
| 413 | const Standard_Character *DD = Tcl_GetVar(di.Interp(),"Draw_DataDir",TCL_GLOBAL_ONLY); |
| 414 | #else |
| 415 | Standard_Character *DD = Tcl_GetVar(di.Interp(),"Draw_DataDir",TCL_GLOBAL_ONLY); |
| 416 | #endif |
| 417 | |
| 418 | Standard_Character *filename = new Standard_Character [strlen(DD)+17]; |
| 419 | sprintf(filename,"%s/%s.topo",DD,argv[1]); |
| 420 | |
| 421 | filebuf fic; |
| 422 | istream in(&fic); |
| 423 | if (!fic.open(filename,ios::in)) { |
| 424 | di << "Cannot open file for reading : " << filename << "\n"; |
| 425 | delete filename; |
| 426 | return -1; |
| 427 | } |
| 428 | |
| 429 | // Read in the shape |
| 430 | |
| 431 | BRep_Builder B; |
| 432 | BRepTools_ShapeSet S(B); |
| 433 | S.Read(in); |
| 434 | TopoDS_Shape theShape; |
| 435 | S.Read(theShape,in); |
| 436 | |
| 437 | // Create the plane |
| 438 | |
| 439 | gp_Pnt O( 2036.25, -97.5, -1460.499755859375 ); |
| 440 | gp_Dir A( 1.0, 0.0, 0.0 ); |
| 441 | |
| 442 | gp_Ax3 PLA( O, N, A ); |
| 443 | gp_Pln Pl(PLA); |
| 444 | |
| 445 | // Perform the section |
| 446 | |
| 447 | //#if ! defined(BRepAlgoAPI_def01) |
| 448 | // BRepAlgoAPI_Section Sec( theShape, Pl, Standard_False); |
| 449 | //#else |
| 450 | // BRepAlgo_Section Sec( theShape, Pl, Standard_False); |
| 451 | //#endif |
| 452 | |
| 453 | TopoDS_Shape res; |
| 454 | |
| 455 | try{ |
| 456 | OCC_CATCH_SIGNALS |
| 457 | // Sec.Approximation(Standard_True); |
| 458 | |
| 459 | //Sec.Build(); |
| 460 | //if(!Sec.IsDone()){ |
| 461 | // cout << "Error performing intersection: not done." << endl; |
| 462 | // delete filename; |
| 463 | // return -1; |
| 464 | //} |
| 465 | //res = Sec.Shape(); |
| 466 | |
| 467 | if (IsBRepAlgoAPI) { |
| 468 | di << "BRepAlgoAPI_Section Sec( theShape, Pl, Standard_False)" <<"\n"; |
| 469 | BRepAlgoAPI_Section Sec( theShape, Pl, Standard_False); |
| 470 | Sec.Build(); |
| 471 | if(!Sec.IsDone()){ |
| 472 | di << "Error performing intersection: not done." << "\n"; |
| 473 | delete filename; |
| 474 | return -1; |
| 475 | } |
| 476 | res = Sec.Shape(); |
| 477 | } else { |
| 478 | di << "BRepAlgo_Section Sec( theShape, Pl, Standard_False)" <<"\n"; |
| 479 | BRepAlgo_Section Sec( theShape, Pl, Standard_False); |
| 480 | Sec.Build(); |
| 481 | if(!Sec.IsDone()){ |
| 482 | di << "Error performing intersection: not done." << "\n"; |
| 483 | delete filename; |
| 484 | return -1; |
| 485 | } |
| 486 | res = Sec.Shape(); |
| 487 | } |
| 488 | |
| 489 | }catch(Standard_Failure){ |
| 490 | Handle(Standard_Failure) error = Standard_Failure::Caught(); |
| 491 | di << "Error performing intersection: not done." << "\n"; |
| 492 | delete filename; |
| 493 | return -1; |
| 494 | } |
| 495 | |
| 496 | if(argc>3) DBRep::Set(argv[3],theShape); |
| 497 | |
| 498 | if(argc>2) DBRep::Set(argv[2],res); |
| 499 | |
| 500 | if(argc>4) { |
| 501 | Handle(Geom_Geometry) result; |
| 502 | Handle(Geom_Plane) C = new Geom_Plane(Pl); |
| 503 | result=C; |
| 504 | DrawTrSurf::Set(argv[4],result); |
| 505 | } |
| 506 | |
| 507 | di << "Done" << "\n"; |
| 508 | |
| 509 | delete filename; |
| 510 | |
| 511 | return 0; |
| 512 | } |
| 513 | |
| 514 | #include<TopoDS_Compound.hxx> |
| 515 | |
| 516 | static int BUC60547(Draw_Interpretor& di, Standard_Integer argc, const char ** argv) { |
| 517 | if(argc!=2) { |
| 518 | di << "Usage : " << argv[0] << " name" << "\n"; |
| 519 | return -1; |
| 520 | } |
| 521 | |
| 522 | Handle(AIS_InteractiveContext) myAISContext = ViewerTest::GetAISContext(); |
| 523 | if(myAISContext.IsNull()) { |
| 524 | di << "use 'vinit' command before " << argv[0] << "\n"; |
| 525 | return -1; |
| 526 | } |
| 527 | |
| 528 | // MKV 30.03.05 |
| 529 | #if ((TCL_MAJOR_VERSION > 8) || ((TCL_MAJOR_VERSION == 8) && (TCL_MINOR_VERSION >= 4))) && !defined(USE_NON_CONST) |
| 530 | const Standard_Character *DD = Tcl_GetVar(di.Interp(),"Draw_DataDir",TCL_GLOBAL_ONLY); |
| 531 | #else |
| 532 | Standard_Character *DD = Tcl_GetVar(di.Interp(),"Draw_DataDir",TCL_GLOBAL_ONLY); |
| 533 | #endif |
| 534 | |
| 535 | Standard_Character *Ch = new Standard_Character[strlen(argv[1])+3]; |
| 536 | |
| 537 | Standard_Character *FileName = new Standard_Character[strlen(DD)+13]; |
| 538 | |
| 539 | TopoDS_Shape free_1,free_2,free_3,free_4; |
| 540 | BRep_Builder B; |
| 541 | sprintf(FileName,"%s/%s",DD,"buc60547a.brep"); |
| 542 | BRepTools::Read(free_1,FileName,B); |
| 543 | sprintf(FileName,"%s/%s",DD,"buc60547b.brep"); |
| 544 | BRepTools::Read(free_2,FileName,B); |
| 545 | sprintf(FileName,"%s/%s",DD,"buc60547c.brep"); |
| 546 | BRepTools::Read(free_3,FileName,B); |
| 547 | sprintf(FileName,"%s/%s",DD,"buc60547d.brep"); |
| 548 | BRepTools::Read(free_4,FileName,B); |
| 549 | sprintf(Ch,"%s_%i",argv[1],1); |
| 550 | DBRep::Set(Ch,free_1); |
| 551 | di << Ch << " "; |
| 552 | sprintf(Ch,"%s_%i",argv[1],2); |
| 553 | DBRep::Set(Ch,free_2); |
| 554 | di << Ch << " "; |
| 555 | sprintf(Ch,"%s_%i",argv[1],3); |
| 556 | DBRep::Set(Ch,free_3); |
| 557 | di << Ch << " "; |
| 558 | sprintf(Ch,"%s_%i",argv[1],4); |
| 559 | DBRep::Set(Ch,free_4); |
| 560 | di << Ch << " "; |
| 561 | |
| 562 | // Handle(AIS_Shape) S1 = new AIS_Shape(free_1); |
| 563 | // Handle(AIS_Shape) S2 = new AIS_Shape(free_2); |
| 564 | // Handle(AIS_Shape) S3 = new AIS_Shape(free_3); |
| 565 | // Handle(AIS_Shape) S4 = new AIS_Shape(free_4); |
| 566 | |
| 567 | // Handle(AIS_InteractiveContext) myAISContext = ViewerTest::GetAISContext(); |
| 568 | |
| 569 | // myAISContext->Display(S1); |
| 570 | // myAISContext->Display(S2); |
| 571 | // myAISContext->Display(S3); |
| 572 | // myAISContext->Display(S4); |
| 573 | |
| 574 | // di.Eval("vfit"); |
| 575 | |
| 576 | TopoDS_Compound Com; |
| 577 | BRep_Builder bui; |
| 578 | bui.MakeCompound(Com); |
| 579 | bui.Add(Com,free_1); |
| 580 | bui.Add(Com,free_2); |
| 581 | bui.Add(Com,free_3); |
| 582 | bui.Add(Com,free_4); |
| 583 | |
| 584 | sprintf(Ch,"%s_%c",argv[1],'c'); |
| 585 | DBRep::Set(Ch,Com); |
| 586 | di << Ch << " "; |
| 587 | |
| 588 | Handle(AIS_Shape) SC = new AIS_Shape(Com); |
| 589 | myAISContext->Display(SC); // nothing on the screen If I save the compound : |
| 590 | |
| 591 | sprintf(FileName,"%s/%s",DD,"free.brep"); |
| 592 | |
| 593 | BRepTools::Write(Com,FileName); |
| 594 | |
| 595 | delete Ch; |
| 596 | delete FileName; |
| 597 | |
| 598 | return 0; |
| 599 | } |
| 600 | |
| 601 | #include<BRepBuilderAPI_MakeVertex.hxx> |
| 602 | #include<TCollection_ExtendedString.hxx> |
| 603 | #include<AIS_LengthDimension.hxx> |
| 604 | |
| 605 | static Standard_Integer BUC60632(Draw_Interpretor& di, Standard_Integer /*n*/, const char ** a) |
| 606 | { |
| 607 | |
| 608 | Handle(AIS_InteractiveContext) myAIScontext = ViewerTest::GetAISContext(); |
| 609 | if(myAIScontext.IsNull()) { |
| 610 | di << "use 'vinit' command before " << a[0] << "\n"; |
| 611 | return -1; |
| 612 | } |
| 613 | myAIScontext->EraseAll(); |
| 614 | |
| 615 | TopoDS_Vertex V1 = BRepBuilderAPI_MakeVertex(gp_Pnt(0,0,0)); |
| 616 | TopoDS_Vertex V2 = BRepBuilderAPI_MakeVertex(gp_Pnt(10,10,0)); |
| 617 | |
| 618 | Handle(AIS_Shape) Ve1 = new AIS_Shape(V1); |
| 619 | Handle(AIS_Shape) Ve2 = new AIS_Shape(V2); |
| 620 | |
| 621 | myAIScontext->Display(Ve1); |
| 622 | myAIScontext->Display(Ve2); |
| 623 | |
| 624 | Handle(Geom_Plane) Plane1 = new Geom_Plane(gp_Pnt(0,0,0),gp_Dir(0,0,1)); |
| 625 | TCollection_ExtendedString Ext1("Dim1"); |
| 626 | Handle(AIS_LengthDimension) Dim1 = new AIS_LengthDimension(V1,V2,Plane1,atof(a[2]),Ext1); |
| 627 | |
| 628 | myAIScontext->SetDisplayMode(Dim1, atof(a[1])); |
| 629 | myAIScontext->Display(Dim1); |
| 630 | return 0; |
| 631 | } |
| 632 | |
| 633 | #include<TopoDS_Wire.hxx> |
| 634 | |
| 635 | static Standard_Integer BUC60652(Draw_Interpretor& di, Standard_Integer argc, const char ** argv ) |
| 636 | { |
| 637 | if(argc!=2) { |
| 638 | di << "Usage : BUC60652 fase" << "\n"; |
| 639 | return 1; |
| 640 | } |
| 641 | TopoDS_Shape shape = DBRep::Get( argv[1] ); |
| 642 | TopoDS_Face face = TopoDS::Face( shape ); |
| 643 | TopoDS_Wire ow = BRepTools::OuterWire( face ); |
| 644 | DBRep::Set( "w", ow ); |
| 645 | return 0; |
| 646 | } |
| 647 | |
| 648 | #include <BRepAlgo_BooleanOperations.hxx> |
| 649 | |
| 650 | static Standard_Integer defNbPntMax = 30; |
| 651 | static Standard_Real defTol3d = 1.e-7; |
| 652 | static Standard_Real defTol2d = 1.e-7; |
| 653 | static Standard_Boolean defRelativeTol=Standard_True; |
| 654 | Standard_Integer NbPntMax = defNbPntMax; |
| 655 | Standard_Real Toler3d =defTol3d; |
| 656 | Standard_Real Toler2d = defTol2d; |
| 657 | Standard_Boolean RelativeTol= defRelativeTol; |
| 658 | // //== // ksection : operateur section appelant BRepAlgo_BooleanOperation |
| 659 | //== // ksection : operateur section appelant BRepAlgo_BooleanOperations |
| 660 | //======================================================================= |
| 661 | Standard_Integer ksection(Draw_Interpretor& di, Standard_Integer n, const char ** a) { |
| 662 | if (n < 8) { |
| 663 | di << "Usage : " << a[0] << " resultat shell1 shell2 NbPntMax Toler3d Toler2d RelativeTol" << "\n"; |
| 664 | return -1; |
| 665 | } |
| 666 | // a[1]= resultat |
| 667 | // a[2]= shell1 |
| 668 | // a[3]= shell2 |
| 669 | // a[4]= NbPntMax |
| 670 | // a[5]= Toler3d |
| 671 | // a[6]= Toler2d |
| 672 | // a[7]= RelativeTol |
| 673 | TopoDS_Shape s1 = DBRep::Get(a[2],TopAbs_SHELL); |
| 674 | TopoDS_Shape s2 = DBRep::Get(a[3],TopAbs_SHELL); |
| 675 | if (s1.IsNull() || s2.IsNull()) return 1; |
| 676 | NbPntMax=atoi(a[4]); |
| 677 | Toler3d=atof(a[5]); |
| 678 | Toler2d=atof(a[6]); |
| 679 | RelativeTol=atoi(a[7]); |
| 680 | |
| 681 | di << "BRepAlgo_BooleanOperations myalgo" << "\n"; |
| 682 | BRepAlgo_BooleanOperations myalgo; |
| 683 | |
| 684 | myalgo.Shapes(s1, s2); |
| 685 | myalgo.SetApproxParameters(NbPntMax,Toler3d,Toler2d,RelativeTol); |
| 686 | TopoDS_Shape res; res = myalgo.Section(); |
| 687 | DBRep::Set(a[1],res); |
| 688 | return 0; |
| 689 | } |
| 690 | |
| 691 | #include <Geom_Axis2Placement.hxx> |
| 692 | #include <AIS_Trihedron.hxx> |
| 693 | |
| 694 | static Standard_Integer BUC60574(Draw_Interpretor& di, Standard_Integer /*n*/, const char ** a) |
| 695 | { |
| 696 | |
| 697 | Handle(AIS_InteractiveContext) myAISContext = ViewerTest::GetAISContext(); |
| 698 | if(myAISContext.IsNull()) { |
| 699 | di << "use 'vinit' command before " << a[0] << "\n"; |
| 700 | return -1; |
| 701 | } |
| 702 | |
| 703 | Handle(Geom_Axis2Placement) atrihedronAxis = new Geom_Axis2Placement(gp::XOY()); |
| 704 | Handle(AIS_Trihedron) atri = new AIS_Trihedron(atrihedronAxis); |
| 705 | gp_Trsf aTrsf; |
| 706 | gp_Vec trans(5,5,5); |
| 707 | aTrsf.SetTranslation(trans); |
| 708 | TopLoc_Location aLoc(aTrsf); |
| 709 | myAISContext->SetLocation(atri,aLoc); |
| 710 | myAISContext->Display(atri,0,-1,Standard_True, Standard_True); |
| 711 | myAISContext->OpenLocalContext(Standard_False, |
| 712 | Standard_True,Standard_False,Standard_False); |
| 713 | myAISContext->Load(atri,3,Standard_True); |
| 714 | |
| 715 | return 0; |
| 716 | } |
| 717 | |
| 718 | #include <TopoDS_Solid.hxx> |
| 719 | #include <BRepPrimAPI_MakeBox.hxx> |
| 720 | #include <BRepPrimAPI_MakeSphere.hxx> |
| 721 | |
| 722 | #include <BRepAlgoAPI_Fuse.hxx> |
| 723 | #include <BRepAlgo_Fuse.hxx> |
| 724 | |
| 725 | #include <V3d_Plane.hxx> |
| 726 | #include <V3d_View.hxx> |
| 727 | #include <gce_MakePln.hxx> |
| 728 | |
| 729 | static Standard_Integer BUC60698(Draw_Interpretor& di, Standard_Integer argc, const char ** a) |
| 730 | { |
| 731 | if(argc > 2) { |
| 732 | di << "Usage : " << a[0] << " [BRepAlgoAPI/BRepAlgo = 1/0]" << "\n"; |
| 733 | return 1; |
| 734 | } |
| 735 | Standard_Boolean IsBRepAlgoAPI = Standard_True; |
| 736 | if (argc == 2) { |
| 737 | Standard_Integer IsB = atoi(a[1]); |
| 738 | if (IsB != 1) { |
| 739 | IsBRepAlgoAPI = Standard_False; |
| 740 | #if ! defined(BRepAlgo_def01) |
| 741 | // di << "Error: There is not BRepAlgo_Fuse class" << "\n"; |
| 742 | // return 1; |
| 743 | #endif |
| 744 | } |
| 745 | } |
| 746 | |
| 747 | Handle(AIS_InteractiveContext) myAISContext = ViewerTest::GetAISContext(); |
| 748 | if(myAISContext.IsNull()) { |
| 749 | di << "use 'vinit' command before " << a[0] << "\n"; |
| 750 | return -1; |
| 751 | } |
| 752 | TopoDS_Solid box = BRepPrimAPI_MakeBox(1,1,1).Solid(); |
| 753 | TopoDS_Shape sphere = BRepPrimAPI_MakeSphere(gp_Pnt(0.5,0.5,0.5),0.6).Shape(); |
| 754 | |
| 755 | //#if ! defined(BRepAlgoAPI_def01) |
| 756 | // TopoDS_Shape fuse = BRepAlgoAPI_Fuse(box,sphere).Shape(); |
| 757 | //#else |
| 758 | // TopoDS_Shape fuse = BRepAlgo_Fuse(box,sphere).Shape(); |
| 759 | //#endif |
| 760 | |
| 761 | TopoDS_Shape fuse; |
| 762 | if (IsBRepAlgoAPI) { |
| 763 | di << "fuse = BRepAlgoAPI_Fuse(box,sphere).Shape()" <<"\n"; |
| 764 | fuse = BRepAlgoAPI_Fuse(box,sphere).Shape(); |
| 765 | } else { |
| 766 | di << "fuse = BRepAlgo_Fuse(box,sphere).Shape()" <<"\n"; |
| 767 | fuse = BRepAlgo_Fuse(box,sphere).Shape(); |
| 768 | } |
| 769 | |
| 770 | Handle_AIS_Shape theAISShape = new AIS_Shape(fuse); |
| 771 | myAISContext->Display(theAISShape); |
| 772 | di.Eval("vfit"); |
| 773 | gp_Pln thegpPln = gce_MakePln(gp_Pnt(0.5,0.5,0.5),gp_Dir(0,0,1)); |
| 774 | Standard_Real A,B,C,D; |
| 775 | thegpPln.Coefficients(A,B,C,D); |
| 776 | Handle_V3d_Plane thePlane = new V3d_Plane(A,B,C,D); |
| 777 | myAISContext->CurrentViewer()->AddPlane (thePlane); // add to defined planes list |
| 778 | for (myAISContext->CurrentViewer()->InitActiveViews(); |
| 779 | myAISContext->CurrentViewer()->MoreActiveViews (); |
| 780 | myAISContext->CurrentViewer()->NextActiveViews ()) { |
| 781 | try { |
| 782 | OCC_CATCH_SIGNALS |
| 783 | myAISContext->CurrentViewer()->ActiveView()->SetPlaneOn(thePlane); |
| 784 | } |
| 785 | catch(Standard_Failure) { |
| 786 | di << "SetPlaneOn catched 1" << "\n"; |
| 787 | } |
| 788 | #ifdef WNT |
| 789 | catch(...) { |
| 790 | di << "SetPlaneOn catched 1" << "\n"; |
| 791 | } |
| 792 | #endif |
| 793 | }//ActiveView loop |
| 794 | for (myAISContext->CurrentViewer()->InitDefinedViews(); |
| 795 | myAISContext->CurrentViewer()->MoreDefinedViews (); |
| 796 | myAISContext->CurrentViewer()->NextDefinedViews ()) { |
| 797 | try { |
| 798 | OCC_CATCH_SIGNALS |
| 799 | myAISContext->CurrentViewer()->DefinedView()->SetPlaneOn(thePlane); |
| 800 | } |
| 801 | catch(Standard_Failure) { |
| 802 | di << "SetPlaneOn catched 1" << "\n"; |
| 803 | } |
| 804 | #ifdef WNT |
| 805 | catch(...) { |
| 806 | di << "SetPlaneOn catched 2" << "\n"; |
| 807 | } |
| 808 | #endif |
| 809 | }//DefinedView loop |
| 810 | myAISContext->UpdateCurrentViewer(); |
| 811 | myAISContext->OpenLocalContext(); |
| 812 | myAISContext->ActivateStandardMode(TopAbs_FACE); |
| 813 | return 0; |
| 814 | } |
| 815 | |
| 816 | static Standard_Integer BUC60699(Draw_Interpretor& di, Standard_Integer /*n*/, const char ** a) |
| 817 | { |
| 818 | |
| 819 | Handle(AIS_InteractiveContext) myAISContext = ViewerTest::GetAISContext(); |
| 820 | if(myAISContext.IsNull()) { |
| 821 | di << "use 'vinit' command before " << a[0] << "\n"; |
| 822 | return -1; |
| 823 | } |
| 824 | TopoDS_Solid B1 = BRepPrimAPI_MakeBox (1,1,1).Solid(); |
| 825 | TopAbs_ShapeEnum theType = B1.ShapeType(); |
| 826 | if ( theType == TopAbs_SOLID ) { |
| 827 | di << "It is a solid." << "\n"; |
| 828 | } else { |
| 829 | di << "It is not solid." << "\n"; |
| 830 | } |
| 831 | myAISContext->Display(new AIS_Shape(B1)); |
| 832 | myAISContext->OpenLocalContext(); |
| 833 | TopAbs_ShapeEnum amode = TopAbs_SOLID; |
| 834 | myAISContext->ActivateStandardMode(amode); |
| 835 | di.Eval("vfit"); |
| 836 | di.Eval("QAMoveTo 200 200"); |
| 837 | di.Eval("QASelect 200 200"); |
| 838 | myAISContext->InitSelected() ; |
| 839 | if ( myAISContext->MoreSelected() ) { |
| 840 | if (myAISContext->HasSelectedShape() ) { |
| 841 | di << "has selected shape : OK" << "\n"; |
| 842 | } else { |
| 843 | di << "has selected shape : bugged - Faulty " << "\n"; |
| 844 | } |
| 845 | } |
| 846 | return 0; |
| 847 | } |
| 848 | |
| 849 | static Standard_Integer GER61394(Draw_Interpretor& di, Standard_Integer argc, const char ** argv ) |
| 850 | { |
| 851 | if(argc > 2) { |
| 852 | di << "Usage : " << argv[0] << " [1/0]" << "\n"; |
| 853 | return -1; |
| 854 | } |
| 855 | |
| 856 | Handle(AIS_InteractiveContext) myAIScontext = ViewerTest::GetAISContext(); |
| 857 | if(myAIScontext.IsNull()) { |
| 858 | di << "use 'vinit' command before " << argv[0] << "\n"; |
| 859 | return -1; |
| 860 | } |
| 861 | Handle(V3d_View) myV3dView = ViewerTest::CurrentView(); |
| 862 | |
| 863 | if((argc == 2) && (atof(argv[1]) == 0)) |
| 864 | myV3dView->SetAntialiasingOff(); |
| 865 | else |
| 866 | myV3dView->SetAntialiasingOn(); |
| 867 | myV3dView->Update(); |
| 868 | return 0; |
| 869 | } |
| 870 | |
| 871 | |
| 872 | #define DEFAULT_COLOR Quantity_NOC_GOLDENROD |
| 873 | |
| 874 | //======================================================================= |
| 875 | //function : GetColorFromName |
| 876 | //purpose : get the Quantity_NameOfColor from a string |
| 877 | //======================================================================= |
| 878 | |
| 879 | static Quantity_NameOfColor GetColorFromName( const char *name ) |
| 880 | { |
| 881 | Quantity_NameOfColor ret = DEFAULT_COLOR; |
| 882 | |
| 883 | Standard_Boolean Found = Standard_False; |
| 884 | Standard_CString colstring; |
| 885 | for(Standard_Integer i=0;i<=514 && !Found;i++) |
| 886 | { |
| 887 | colstring = Quantity_Color::StringName(Quantity_NameOfColor(i)); |
| 888 | if (!strcasecmp(name,colstring)) { |
| 889 | ret = (Quantity_NameOfColor)i; |
| 890 | Found = Standard_True; |
| 891 | } |
| 892 | } |
| 893 | |
| 894 | return ret; |
| 895 | } |
| 896 | |
| 897 | static Standard_Integer setcolor (Draw_Interpretor& di,Standard_Integer argc, const char ** argv ) |
| 898 | { |
| 899 | |
| 900 | Handle(AIS_InteractiveContext) myAISContext = ViewerTest::GetAISContext(); |
| 901 | if(myAISContext.IsNull()) { |
| 902 | di << "use 'vinit' command before " << argv[0] << "\n"; |
| 903 | return -1; |
| 904 | } |
| 905 | |
| 906 | Handle(V3d_View) myV3dView = ViewerTest::CurrentView(); |
| 907 | |
| 908 | switch (argc){ |
| 909 | |
| 910 | case 2: |
| 911 | { |
| 912 | di <<"case 2 : This command will change the background color to " << argv[1]<< "\n"; |
| 913 | // setcolor <name> |
| 914 | // Change the background color of the view with a predefined name Graphic3d_NOC_<name> |
| 915 | |
| 916 | myV3dView -> SetBackgroundColor(GetColorFromName(argv[1])); |
| 917 | myV3dView -> Redraw(); |
| 918 | break; |
| 919 | } |
| 920 | |
| 921 | case 3: |
| 922 | { |
| 923 | di <<"case 3 : This command will change the color of the objects to "<< argv[2]<< "\n"; |
| 924 | // setcolor <object> <name> |
| 925 | // Change the object color with a predefined name |
| 926 | |
| 927 | TopoDS_Shape aShape = DBRep::Get(argv[1]); |
| 928 | Handle(AIS_InteractiveObject) myShape = new AIS_Shape (aShape); |
| 929 | myAISContext->SetColor(myShape,GetColorFromName(argv[2]),Standard_True); |
| 930 | myAISContext->Display(myShape,Standard_True); |
| 931 | myAISContext->UpdateCurrentViewer(); |
| 932 | // return 0; |
| 933 | break; |
| 934 | } |
| 935 | case 4: |
| 936 | { |
| 937 | di <<"case 4 : This command will change the background color to <r> <g> <b> :"<< argv[1] << argv[2] << argv[3] << "\n"; |
| 938 | |
| 939 | // setcolor <r> <g> <b> |
| 940 | // Change the background color of the view with the color values <r>,<g>,<b> |
| 941 | // A color value must be defined in the space [0.,1.] |
| 942 | |
| 943 | Standard_Real QuantityOfRed = atoi(argv[1]); |
| 944 | Standard_Real QuantityOfGreen = atoi(argv[2]); |
| 945 | Standard_Real QuantityOfBlue = atoi(argv[3]); |
| 946 | myV3dView->SetBackgroundColor(Quantity_TOC_RGB,QuantityOfRed,QuantityOfGreen,QuantityOfBlue); |
| 947 | myV3dView->Redraw(); |
| 948 | break; |
| 949 | } |
| 950 | |
| 951 | case 5: |
| 952 | { |
| 953 | di <<"case 5 : This command will change the color of the objects to <r> <g> <b> : "<<argv[2]<< argv[3]<< argv[4]<< "\n"; |
| 954 | |
| 955 | // setcolor <object> <r> <g> <b> |
| 956 | // change the object color with RGB values. |
| 957 | |
| 958 | |
| 959 | Standard_Real QuantityOfRed = atof(argv[2]); |
| 960 | Standard_Real QuantityOfGreen = atof(argv[3]); |
| 961 | Standard_Real QuantityOfBlue = atof(argv[4]); |
| 962 | |
| 963 | TopoDS_Shape aShape = DBRep::Get(argv[1]); |
| 964 | Handle(AIS_InteractiveObject) myShape = new AIS_Shape (aShape); |
| 965 | myAISContext->SetColor(myShape,Quantity_Color(QuantityOfRed,QuantityOfGreen,QuantityOfBlue,Quantity_TOC_RGB),Standard_True); |
| 966 | myAISContext->Display(myShape,Standard_True); |
| 967 | myAISContext->UpdateCurrentViewer(); |
| 968 | // myShape->SetColor(Quantity_Color(QuantityOfRed,QuantityOfGreen,QuantityOfBlue,Quantity_TOC_RGB)); |
| 969 | // myShape->Redisplay(); |
| 970 | break; |
| 971 | } |
| 972 | } |
| 973 | return 0; |
| 974 | } |
| 975 | |
| 976 | static Standard_Integer BUC60726 (Draw_Interpretor& di,Standard_Integer argc, const char ** argv ) |
| 977 | { |
| 978 | Handle(AIS_InteractiveContext) myAISContext = ViewerTest::GetAISContext(); |
| 979 | if(myAISContext.IsNull()) { |
| 980 | di << "use 'vinit' command before " << argv[0] << "\n"; |
| 981 | return -1; |
| 982 | } |
| 983 | |
| 984 | if(argc != 2) { |
| 985 | di << "Usage : " << argv[0] << " 0/1" << "\n"; |
| 986 | } |
| 987 | |
| 988 | if(atoi(argv[1]) == 0) { |
| 989 | myAISContext->CloseAllContexts(); |
| 990 | BRepPrimAPI_MakeBox B(gp_Pnt(-400.,-400.,-100.),200.,150.,100.); |
| 991 | Handle(AIS_Shape) aBox = new AIS_Shape(B.Shape()); |
| 992 | myAISContext->Display(aBox); |
| 993 | } else if(atoi(argv[1]) == 1) { |
| 994 | myAISContext->CloseAllContexts(); |
| 995 | myAISContext->OpenLocalContext(); |
| 996 | myAISContext->ActivateStandardMode(TopAbs_EDGE); |
| 997 | } else if(atoi(argv[1]) == 2) { |
| 998 | myAISContext->CloseAllContexts(); |
| 999 | myAISContext->OpenLocalContext(); |
| 1000 | myAISContext->ActivateStandardMode(TopAbs_FACE); |
| 1001 | } else { |
| 1002 | di << "Usage : " << argv[0] << " 0/1" << "\n"; |
| 1003 | return -1; |
| 1004 | } |
| 1005 | |
| 1006 | return 0; |
| 1007 | } |
| 1008 | |
| 1009 | #include <BRepBndLib.hxx> |
| 1010 | #include <Bnd_HArray1OfBox.hxx> |
| 1011 | |
| 1012 | static Standard_Integer BUC60729 (Draw_Interpretor& di,Standard_Integer /*argc*/, const char ** /*argv*/ ) |
| 1013 | { |
| 1014 | Bnd_Box aMainBox; |
| 1015 | TopoDS_Shape aShape = BRepPrimAPI_MakeBox(1,1,1).Solid(); |
| 1016 | |
| 1017 | BRepBndLib::Add(aShape , aMainBox ); |
| 1018 | |
| 1019 | Standard_Integer siMaxNbrBox = 6; |
| 1020 | Bnd_BoundSortBox m_BoundSortBox; |
| 1021 | m_BoundSortBox.Initialize( aMainBox, siMaxNbrBox ); |
| 1022 | TopExp_Explorer aExplorer(aShape,TopAbs_FACE); |
| 1023 | Standard_Integer i; |
| 1024 | |
| 1025 | |
| 1026 | // Bnd_Box __emptyBox; // Box is void ! |
| 1027 | // Handle_Bnd_HArray1OfBox __aSetOfBox = new Bnd_HArray1OfBox( 1, siMaxNbrBox, __emptyBox ); |
| 1028 | |
| 1029 | for (i=1,aExplorer.ReInit(); aExplorer.More(); aExplorer.Next(),i++ ) |
| 1030 | { |
| 1031 | const TopoDS_Shape& aFace = aExplorer.Current(); |
| 1032 | Bnd_Box aBox; |
| 1033 | BRepBndLib::Add( aFace, aBox ); |
| 1034 | m_BoundSortBox.Add( aBox, i ); |
| 1035 | // __aSetOfBox->SetValue( i, aBox ); |
| 1036 | } |
| 1037 | // m_BoundSortBox.Initialize( aMainBox, siMaxNbrBox ); |
| 1038 | |
| 1039 | return 0; |
| 1040 | } |
| 1041 | |
| 1042 | static Standard_Integer BUC60724(Draw_Interpretor& di, Standard_Integer /*argc*/, const char ** /*argv*/ ) |
| 1043 | { |
| 1044 | TCollection_AsciiString as1(""); |
| 1045 | TCollection_AsciiString as2('\0'); |
| 1046 | if((as1.ToCString()!=NULL) || (as1.ToCString() != "")) |
| 1047 | di << "Faulty : the first string is not zero string : " << as1.ToCString() << "\n"; |
| 1048 | |
| 1049 | if((as2.ToCString()!=NULL) || (as2.ToCString() != "")) |
| 1050 | di << "Faulty : the second string is not zero string : " << as2.ToCString() << "\n"; |
| 1051 | |
| 1052 | return 0; |
| 1053 | } |
| 1054 | |
| 1055 | #include <UnitsAPI.hxx> |
| 1056 | |
| 1057 | static Standard_Integer BUC60727(Draw_Interpretor& di, Standard_Integer /*argc*/, const char ** /*argv*/ ) |
| 1058 | { |
| 1059 | di <<"Program Test" << "\n"; |
| 1060 | UnitsAPI::SetLocalSystem(UnitsAPI_MDTV); //length is mm |
| 1061 | di <<"AnyToLS (3,mm) = " << UnitsAPI::AnyToLS(3.,"mm") << "\n"; // result was WRONG. |
| 1062 | |
| 1063 | return 0; |
| 1064 | } |
| 1065 | |
| 1066 | #include <gp_Circ.hxx> |
| 1067 | #include <Geom_Circle.hxx> |
| 1068 | #include <GeomAPI.hxx> |
| 1069 | #include <Geom2d_CartesianPoint.hxx> |
| 1070 | #include <Geom2dGcc_QualifiedCurve.hxx> |
| 1071 | #include <Geom2dGcc_Circ2d2TanRad.hxx> |
| 1072 | #include <Geom2d_Circle.hxx> |
| 1073 | #include <ProjLib.hxx> |
| 1074 | |
| 1075 | static Standard_Integer BUC60792(Draw_Interpretor& di, Standard_Integer /*argc*/, const char ** argv ) |
| 1076 | { |
| 1077 | Handle(AIS_InteractiveContext) aContext = ViewerTest::GetAISContext(); |
| 1078 | if(aContext.IsNull()) { |
| 1079 | di << "use 'vinit' command before " << argv[0] << "\n"; |
| 1080 | return -1; |
| 1081 | } |
| 1082 | |
| 1083 | gp_Pnt pt3d(0, 20, 150); |
| 1084 | gp_Ax2 anAx2(gp_Pnt(0, 0, 0), gp_Dir(1, 0, 0), gp_Dir(0, 0, 1)); |
| 1085 | gp_Circ circ(anAx2, 50.0); |
| 1086 | Handle_Geom_Circle gcir = new Geom_Circle(circ); |
| 1087 | Handle_Geom_Plane pln = new Geom_Plane(gp_Ax3(gp_Pnt(0, 0, 0), gp_Dir(1, 0, 0))); |
| 1088 | Handle_Geom2d_Curve gcir1 = GeomAPI::To2d(gcir, pln->Pln()); |
| 1089 | TopoDS_Shape sh1 = BRepBuilderAPI_MakeEdge(gcir1, pln).Shape(); |
| 1090 | Handle_AIS_Shape ais1 = new AIS_Shape(sh1); |
| 1091 | aContext->SetColor(ais1, Quantity_NOC_INDIANRED); |
| 1092 | aContext->Display(ais1); |
| 1093 | DBRep::Set("sh0",sh1); |
| 1094 | gp_Pnt2d thepoint; |
| 1095 | // local_get_2Dpointfrom3Dpoint(pt3d, pln->Pln(), thepoint); |
| 1096 | thepoint = ProjLib::Project(pln->Pln(),pt3d); |
| 1097 | Handle_Geom2d_CartesianPoint ThePoint = new Geom2d_CartesianPoint(thepoint); |
| 1098 | Geom2dAdaptor_Curve acur1(gcir1) ; |
| 1099 | Geom2dGcc_QualifiedCurve qcur1(acur1, GccEnt_outside) ; |
| 1100 | Geom2dGcc_Circ2d2TanRad cirtanrad(qcur1, ThePoint, 200.0, 0.0001); |
| 1101 | printf("\n No. of solutions = %d\n", cirtanrad.NbSolutions()); |
| 1102 | Handle_Geom2d_Circle gccc; |
| 1103 | if( cirtanrad.NbSolutions() ) { |
| 1104 | for( int i = 1; i<=cirtanrad.NbSolutions(); i++) { |
| 1105 | gp_Circ2d ccc = cirtanrad.ThisSolution(i); |
| 1106 | gccc = new Geom2d_Circle(ccc); |
| 1107 | TopoDS_Shape sh = BRepBuilderAPI_MakeEdge(gccc, pln).Shape(); |
| 1108 | Standard_Character aStr[5]; |
| 1109 | sprintf(aStr,"sh%d",i); |
| 1110 | DBRep::Set(aStr,sh); |
| 1111 | Handle_AIS_Shape ais = new AIS_Shape(sh); |
| 1112 | if( i ==1 ) |
| 1113 | aContext->SetColor(ais, Quantity_NOC_GREEN); |
| 1114 | if( i == 2) |
| 1115 | aContext->SetColor(ais, Quantity_NOC_HOTPINK); |
| 1116 | aContext->Display(ais); |
| 1117 | Standard_Real ParSol1, ParSol2, ParArg1, ParArg2; |
| 1118 | gp_Pnt2d PntSol1, PntSol2; |
| 1119 | cirtanrad.Tangency1(i, ParSol1, ParArg1, PntSol1); |
| 1120 | printf("%f\t%f\t\t%f\t%f\n",ParSol1, ParArg1,PntSol1.X(),PntSol1.Y()); |
| 1121 | cirtanrad.Tangency2(i, ParSol2, ParArg2, PntSol2); |
| 1122 | printf("%f\t%f\t\t%f\t%f\n",ParSol2, ParArg2,PntSol2.X(),PntSol2.Y()); |
| 1123 | } |
| 1124 | } |
| 1125 | return 0; |
| 1126 | } |
| 1127 | |
| 1128 | #include <TColgp_Array2OfPnt.hxx> |
| 1129 | #include <Geom_BezierSurface.hxx> |
| 1130 | #include <BRepBuilderAPI_MakeFace.hxx> |
| 1131 | #include <BRepBuilderAPI_MakeWire.hxx> |
| 1132 | #include <Geom_OffsetSurface.hxx> |
| 1133 | #include <BRepFilletAPI_MakeFillet2d.hxx> |
| 1134 | #include <GeomProjLib.hxx> |
| 1135 | #include <Geom_TrimmedCurve.hxx> |
| 1136 | |
| 1137 | static Standard_Integer BUC60811(Draw_Interpretor& di, Standard_Integer argc, const char ** argv ) |
| 1138 | { |
| 1139 | if(argc == 4) { |
| 1140 | TopLoc_Location L1; |
| 1141 | TopoDS_Edge aEdge = TopoDS::Edge(DBRep::Get(argv[2],TopAbs_EDGE)); |
| 1142 | TopoDS_Face aFace = TopoDS::Face(DBRep::Get(argv[3],TopAbs_FACE)); |
| 1143 | Standard_Real f = 0.0, l = 0.0; |
| 1144 | Handle(Geom_Curve) GC = BRep_Tool::Curve(aEdge,f,l); |
| 1145 | Handle(Geom_Surface) GS = BRep_Tool::Surface(aFace, L1); |
| 1146 | GC = new Geom_TrimmedCurve(GC, f, l); |
| 1147 | Handle(Geom_Curve) projCurve = GeomProjLib::Project(GC,GS); |
| 1148 | BRepBuilderAPI_MakeWire *myWire; |
| 1149 | myWire = new BRepBuilderAPI_MakeWire(); |
| 1150 | myWire->Add((BRepBuilderAPI_MakeEdge(projCurve)).Edge()); |
| 1151 | DBRep::Set(argv[1],myWire->Wire()); |
| 1152 | return 0; |
| 1153 | } |
| 1154 | |
| 1155 | Handle(AIS_InteractiveContext) aContext = ViewerTest::GetAISContext(); |
| 1156 | if(aContext.IsNull()) { |
| 1157 | di << "use 'vinit' command before " << argv[0] << "\n"; |
| 1158 | return -1; |
| 1159 | } |
| 1160 | |
| 1161 | //step 1. creating a Bezier Surface and a patch |
| 1162 | TopoDS_Face FP; |
| 1163 | TopoDS_Shape FP1; |
| 1164 | TopoDS_Solid solid; |
| 1165 | Handle(AIS_Shape) ais1; |
| 1166 | Handle_AIS_Shape ais2; |
| 1167 | Handle(Geom_BezierSurface) BZ1; |
| 1168 | TColgp_Array2OfPnt array1(1,3,1,3); |
| 1169 | array1.SetValue(1,1,gp_Pnt(0,100,0)); |
| 1170 | array1.SetValue(1,2,gp_Pnt(200,100,0)); |
| 1171 | array1.SetValue(1,3,gp_Pnt(400,100,0)); |
| 1172 | array1.SetValue(2,1,gp_Pnt(0,200,100)); |
| 1173 | array1.SetValue(2,2,gp_Pnt(200,200,100)); |
| 1174 | array1.SetValue(2,3,gp_Pnt(400,200,100)); |
| 1175 | array1.SetValue(3,1,gp_Pnt(0,300,0)); |
| 1176 | array1.SetValue(3,2,gp_Pnt(200,300,0)); |
| 1177 | array1.SetValue(3,3,gp_Pnt(400,300,0)); |
| 1178 | BZ1 = new Geom_BezierSurface(array1); |
| 1179 | BRepBuilderAPI_MakeFace bzf1( BZ1, Precision::Confusion() ); |
| 1180 | TopoDS_Face F1= bzf1.Face(); |
| 1181 | ais1 = new AIS_Shape(F1); |
| 1182 | DBRep::Set("F1",F1); |
| 1183 | aContext->SetMaterial(ais1,Graphic3d_NOM_ALUMINIUM,Standard_False); |
| 1184 | aContext->Display(ais1); |
| 1185 | BRep_Builder B; |
| 1186 | TopoDS_Shell shell; |
| 1187 | B.MakeShell(shell); |
| 1188 | B.Add(shell, bzf1); |
| 1189 | B.MakeSolid(solid); |
| 1190 | B.Add(solid,shell); |
| 1191 | gp_Dir D(0, 0, 1.0f); |
| 1192 | BRepBuilderAPI_MakeWire mkw; |
| 1193 | gp_Pnt p1 = gp_Pnt(150., 150.0, 260.); |
| 1194 | gp_Pnt p2 = gp_Pnt(350., 150., 260.); |
| 1195 | BRepBuilderAPI_MakeEdge* E1 = new BRepBuilderAPI_MakeEdge(p1,p2); |
| 1196 | mkw.Add(*E1); |
| 1197 | p1 = gp_Pnt(350., 150., 260.); |
| 1198 | p2 = gp_Pnt(350., 250., 260.); |
| 1199 | BRepBuilderAPI_MakeEdge* E2 = new BRepBuilderAPI_MakeEdge(p1,p2); |
| 1200 | mkw.Add(*E2); |
| 1201 | p1 = gp_Pnt(350., 250., 260.); |
| 1202 | p2 = gp_Pnt(300., 250.0, 260.); |
| 1203 | BRepBuilderAPI_MakeEdge* E3 = new BRepBuilderAPI_MakeEdge(p1,p2); |
| 1204 | mkw.Add(*E3); |
| 1205 | p1 = gp_Pnt(300., 250.0, 260.); |
| 1206 | p2 = gp_Pnt(200., 200.0, 260.); |
| 1207 | BRepBuilderAPI_MakeEdge* E4 = new BRepBuilderAPI_MakeEdge(p1,p2); |
| 1208 | mkw.Add(*E4); |
| 1209 | p1 = gp_Pnt(200., 200.0, 260.); |
| 1210 | p2 = gp_Pnt(150., 200.0, 260.); |
| 1211 | BRepBuilderAPI_MakeEdge* E5 = new BRepBuilderAPI_MakeEdge(p1,p2); |
| 1212 | mkw.Add(*E5); |
| 1213 | p1 = gp_Pnt(150., 200.0, 260.); |
| 1214 | p2 = gp_Pnt(150., 150.0, 260.); |
| 1215 | BRepBuilderAPI_MakeEdge* E6 = new BRepBuilderAPI_MakeEdge(p1,p2); |
| 1216 | mkw.Add(*E6); |
| 1217 | FP = BRepBuilderAPI_MakeFace(mkw.Wire()); |
| 1218 | ais2 = new AIS_Shape( FP ); |
| 1219 | aContext->SetMaterial(ais2,Graphic3d_NOM_ALUMINIUM,Standard_False); |
| 1220 | aContext->Display( ais2 ); |
| 1221 | |
| 1222 | DBRep::Set("FP",FP); |
| 1223 | |
| 1224 | //step 2. offseting the surface. |
| 1225 | Handle_Geom_OffsetSurface offsurf; |
| 1226 | offsurf = new Geom_OffsetSurface(BZ1, -100); |
| 1227 | BRepBuilderAPI_MakeFace bzf2( offsurf, Precision::Confusion() ); |
| 1228 | TopoDS_Face F2= bzf2.Face(); |
| 1229 | Handle_AIS_Shape ais22 = new AIS_Shape(F2); |
| 1230 | aContext->Display(ais22); |
| 1231 | DBRep::Set("F2",F2); |
| 1232 | |
| 1233 | //step 3. filleting the patch. |
| 1234 | //( I want to project wire of this patch on offseted surface above) |
| 1235 | BRepFilletAPI_MakeFillet2d fillet( FP ); |
| 1236 | TopExp_Explorer Ex; |
| 1237 | Ex.Init(FP, TopAbs_VERTEX); |
| 1238 | TopoDS_Vertex v1 = TopoDS::Vertex(Ex.Current()); |
| 1239 | fillet.AddFillet(v1, 20); |
| 1240 | printf("\nError is %d ", fillet.Status()); |
| 1241 | Ex.Next(); |
| 1242 | TopoDS_Vertex V2 = TopoDS::Vertex(Ex.Current()); |
| 1243 | fillet.AddFillet(V2, 20); |
| 1244 | printf("\nError is %d ", fillet.Status()); |
| 1245 | fillet.Build(); |
| 1246 | FP1 = fillet.Shape(); |
| 1247 | ais2 = new AIS_Shape( FP1 ); |
| 1248 | aContext->SetMaterial(ais2,Graphic3d_NOM_ALUMINIUM,Standard_False); |
| 1249 | aContext->Display( ais2 ); |
| 1250 | |
| 1251 | DBRep::Set("FP1",FP1); |
| 1252 | |
| 1253 | //step 4. Projecting the wire of this patch on offsetted surface. |
| 1254 | // TopExp_Explorer Ex; |
| 1255 | BRepBuilderAPI_MakeWire *myWire; |
| 1256 | myWire = new BRepBuilderAPI_MakeWire(); |
| 1257 | for (Ex.Init( FP1, TopAbs_EDGE); Ex.More(); Ex.Next()) |
| 1258 | { |
| 1259 | TopoDS_Edge e1 = TopoDS::Edge(Ex.Current()); |
| 1260 | Standard_Real f = 0.0, l = 0.0; |
| 1261 | Handle_Geom_Curve newBSplin = BRep_Tool::Curve(e1, f, l); |
| 1262 | newBSplin = new Geom_TrimmedCurve(newBSplin, f, l); |
| 1263 | Handle(Geom_Curve) projCurve = GeomProjLib::Project(newBSplin,offsurf); |
| 1264 | myWire->Add((BRepBuilderAPI_MakeEdge(projCurve)).Edge()); |
| 1265 | } |
| 1266 | Handle_AIS_Shape ais33 = new AIS_Shape( myWire->Wire() ); |
| 1267 | aContext->Display(ais33); |
| 1268 | |
| 1269 | DBRep::Set("Wire",myWire->Wire()); |
| 1270 | |
| 1271 | return 0; |
| 1272 | } |
| 1273 | |
| 1274 | #include<GeomAPI_ExtremaCurveCurve.hxx> |
| 1275 | |
| 1276 | static int BUC60825(Draw_Interpretor& di, Standard_Integer argc, const char ** argv) |
| 1277 | |
| 1278 | { |
| 1279 | if(argc < 3){ |
| 1280 | printf("Usage: %s edge1 edge2",argv[0]); |
| 1281 | return(-1); |
| 1282 | } |
| 1283 | |
| 1284 | TopoDS_Edge E1 = TopoDS::Edge(DBRep::Get(argv[1])), |
| 1285 | E2 = TopoDS::Edge(DBRep::Get(argv[2])); |
| 1286 | |
| 1287 | Standard_Real fp , lp; |
| 1288 | |
| 1289 | Handle(Geom_Curve) C1 = BRep_Tool::Curve(E1 , fp , lp), |
| 1290 | C2 = BRep_Tool::Curve(E2 , fp , lp); |
| 1291 | |
| 1292 | GeomAPI_ExtremaCurveCurve aExt(C1 , C2); |
| 1293 | |
| 1294 | di << "NB RESULTS : " << aExt.NbExtrema() << "\n"; |
| 1295 | |
| 1296 | return 0; |
| 1297 | } |
| 1298 | |
| 1299 | #include <BRepBuilderAPI_MakePolygon.hxx> |
| 1300 | #include <BRepOffsetAPI_ThruSections.hxx> |
| 1301 | |
| 1302 | static int OCC10006(Draw_Interpretor& di, Standard_Integer argc, const char ** argv) |
| 1303 | { |
| 1304 | if(argc > 2) { |
| 1305 | di << "Usage : " << argv[0] << " [BRepAlgoAPI/BRepAlgo = 1/0]" << "\n"; |
| 1306 | return 1; |
| 1307 | } |
| 1308 | Standard_Boolean IsBRepAlgoAPI = Standard_True; |
| 1309 | if (argc == 2) { |
| 1310 | Standard_Integer IsB = atoi(argv[1]); |
| 1311 | if (IsB != 1) { |
| 1312 | IsBRepAlgoAPI = Standard_False; |
| 1313 | #if ! defined(BRepAlgo_def01) |
| 1314 | // di << "Error: There is not BRepAlgo_Fuse class" << "\n"; |
| 1315 | // return 1; |
| 1316 | #endif |
| 1317 | } |
| 1318 | } |
| 1319 | |
| 1320 | double bottompoints1[12] = { 10, -10, 0, 100, -10, 0, 100, -100, 0, 10, -100, 0}; |
| 1321 | double toppoints1[12] = { 0, 0, 10, 100, 0, 10, 100, -100, 10, 0, -100, 10}; |
| 1322 | double bottompoints2[12] = { 0, 0, 10.00, 100, 0, 10.00, 100, -100, 10.00, 0, -100, 10.00}; |
| 1323 | double toppoints2[12] = { 0, 0, 250, 100, 0, 250, 100, -100, 250, 0, -100, 250}; |
| 1324 | BRepBuilderAPI_MakePolygon bottompolygon1, toppolygon1, bottompolygon2, toppolygon2; |
| 1325 | gp_Pnt tmppnt; |
| 1326 | for (int i=0;i<4;i++) { |
| 1327 | tmppnt.SetCoord(bottompoints1[3*i], bottompoints1[3*i+1], bottompoints1[3*i+2]); |
| 1328 | bottompolygon1.Add(tmppnt); |
| 1329 | tmppnt.SetCoord(toppoints1[3*i], toppoints1[3*i+1], toppoints1[3*i+2]); |
| 1330 | toppolygon1.Add(tmppnt); |
| 1331 | tmppnt.SetCoord(bottompoints2[3*i], bottompoints2[3*i+1], bottompoints2[3*i+2]); |
| 1332 | bottompolygon2.Add(tmppnt); |
| 1333 | tmppnt.SetCoord(toppoints2[3*i], toppoints2[3*i+1], toppoints2[3*i+2]); |
| 1334 | toppolygon2.Add(tmppnt); |
| 1335 | } |
| 1336 | bottompolygon1.Close(); |
| 1337 | DBRep::Set("B1",bottompolygon1.Shape()); |
| 1338 | toppolygon1.Close(); |
| 1339 | DBRep::Set("T1",toppolygon1.Shape()); |
| 1340 | bottompolygon2.Close(); |
| 1341 | DBRep::Set("B2",bottompolygon2.Shape()); |
| 1342 | toppolygon2.Close(); |
| 1343 | DBRep::Set("T2",toppolygon2.Shape()); |
| 1344 | BRepOffsetAPI_ThruSections loft1(Standard_True, Standard_True); |
| 1345 | loft1.AddWire(bottompolygon1.Wire()); |
| 1346 | loft1.AddWire(toppolygon1.Wire()); |
| 1347 | loft1.Build(); |
| 1348 | BRepOffsetAPI_ThruSections loft2(Standard_True, Standard_True); |
| 1349 | loft2.AddWire(bottompolygon2.Wire()); |
| 1350 | loft2.AddWire(toppolygon2.Wire()); |
| 1351 | loft2.Build(); |
| 1352 | if (loft1.Shape().IsNull() || loft2.Shape().IsNull()) |
| 1353 | return 1; |
| 1354 | DBRep::Set("TS1",loft1.Shape()); |
| 1355 | DBRep::Set("TS2",loft2.Shape()); |
| 1356 | |
| 1357 | //#if ! defined(BRepAlgoAPI_def01) |
| 1358 | // BRepAlgoAPI_Fuse result(loft1.Shape(), loft2.Shape()); |
| 1359 | //#else |
| 1360 | // BRepAlgo_Fuse result(loft1.Shape(), loft2.Shape()); |
| 1361 | //#endif |
| 1362 | if (IsBRepAlgoAPI) { |
| 1363 | di << "BRepAlgoAPI_Fuse result(loft1.Shape(), loft2.Shape())" <<"\n"; |
| 1364 | BRepAlgoAPI_Fuse result(loft1.Shape(), loft2.Shape()); |
| 1365 | DBRep::Set("F",result.Shape()); |
| 1366 | } else { |
| 1367 | di << "BRepAlgo_Fuse result(loft1.Shape(), loft2.Shape())" <<"\n"; |
| 1368 | BRepAlgo_Fuse result(loft1.Shape(), loft2.Shape()); |
| 1369 | DBRep::Set("F",result.Shape()); |
| 1370 | } |
| 1371 | |
| 1372 | // DBRep::Set("F",result.Shape()); |
| 1373 | return 0; |
| 1374 | } |
| 1375 | |
| 1376 | #include <Geom_RectangularTrimmedSurface.hxx> |
| 1377 | #include <GC_MakeTrimmedCone.hxx> |
| 1378 | |
| 1379 | static Standard_Integer BUC60856(Draw_Interpretor& di, Standard_Integer /*argc*/, const char ** argv ) |
| 1380 | { |
| 1381 | Handle(AIS_InteractiveContext) aContext = ViewerTest::GetAISContext(); |
| 1382 | if(aContext.IsNull()) { |
| 1383 | di << "use 'vinit' command before " << argv[0] << "\n"; |
| 1384 | return -1; |
| 1385 | } |
| 1386 | |
| 1387 | gp_Ax2 Cone_Ax; |
| 1388 | double R1=8, R2=16, H1=20, H2=40, angle; |
| 1389 | gp_Pnt P0(0,0,0), |
| 1390 | P1(0,0,20), P2(0,0,45); |
| 1391 | angle = 2*M_PI; |
| 1392 | Handle(Geom_RectangularTrimmedSurface) S = GC_MakeTrimmedCone (P1, P2, R1, R2).Value(); |
| 1393 | TopoDS_Shape myshape = BRepBuilderAPI_MakeFace(S, Precision::Confusion()).Shape(); |
| 1394 | Handle(AIS_Shape) ais1 = new AIS_Shape(myshape); |
| 1395 | aContext->Display(ais1); |
| 1396 | aContext->SetColor(ais1, Quantity_NOC_BLUE1); |
| 1397 | |
| 1398 | Handle(Geom_RectangularTrimmedSurface) S2 = GC_MakeTrimmedCone (P1, P2,R1, 0).Value(); |
| 1399 | TopoDS_Shape myshape2 = BRepBuilderAPI_MakeFace(S2, Precision::Confusion()).Shape(); |
| 1400 | Handle(AIS_Shape) ais2 = new AIS_Shape(myshape2); |
| 1401 | aContext->Display(ais2); |
| 1402 | aContext->SetColor(ais2, Quantity_NOC_RED); |
| 1403 | return 0; |
| 1404 | } |
| 1405 | |
| 1406 | #if ! defined(WNT) |
| 1407 | //#include <fstream.h> |
| 1408 | #ifdef HAVE_FSTREAM |
| 1409 | # include <fstream> |
| 1410 | #elif defined (HAVE_FSTREAM_H) |
| 1411 | # include <fstream.h> |
| 1412 | #endif |
| 1413 | //#include <Standard_Stream.hxx> |
| 1414 | //========================================================================== |
| 1415 | //function : CoordLoad |
| 1416 | // chargement d une face dans l explorer. |
| 1417 | //========================================================================== |
| 1418 | static Standard_Integer coordload (Draw_Interpretor& di, Standard_Integer argc, const char ** argv) |
| 1419 | { |
| 1420 | char line[256]; |
| 1421 | char X[30], Y[30]; |
| 1422 | int fr; |
| 1423 | TopoDS_Vertex V1,V2; |
| 1424 | TopoDS_Edge Edge; |
| 1425 | TopoDS_Wire Wire; |
| 1426 | TopoDS_Face Face; |
| 1427 | |
| 1428 | if (argc < 3) return 1; |
| 1429 | |
| 1430 | ifstream file(argv[2], ios::in); |
| 1431 | if(!file) |
| 1432 | { |
| 1433 | di<<"unable to open "<<argv[2]<<" for input"<<"\n"; |
| 1434 | return 2; |
| 1435 | } |
| 1436 | BRepBuilderAPI_MakeWire WB; |
| 1437 | |
| 1438 | file.getline(line,80); |
| 1439 | for(int i=0;i<30;i++) X[i]=Y[i]=0; |
| 1440 | fr = sscanf(line,"%20c%20c",&X,&Y); |
| 1441 | V1 = BRepBuilderAPI_MakeVertex(gp_Pnt(atof(X),atof(Y),0.0)); |
| 1442 | |
| 1443 | for(;;) |
| 1444 | { |
| 1445 | file.getline(line,80); |
| 1446 | if (!file) break; |
| 1447 | for(int i=0;i<30;i++) X[i]=Y[i]=0; |
| 1448 | fr = sscanf(line,"%20c%20c",&X,&Y); |
| 1449 | V2 = BRepBuilderAPI_MakeVertex(gp_Pnt(atof(X),atof(Y),0.0)); |
| 1450 | Edge = BRepBuilderAPI_MakeEdge(V1,V2); |
| 1451 | WB.Add(Edge); |
| 1452 | V1=V2; |
| 1453 | } |
| 1454 | |
| 1455 | file.close(); |
| 1456 | if (WB.IsDone()) Wire = WB.Wire(); |
| 1457 | Face = BRepBuilderAPI_MakeFace(Wire); |
| 1458 | |
| 1459 | DBRep::Set (argv[1],Face); |
| 1460 | return 0; |
| 1461 | } |
| 1462 | #endif |
| 1463 | |
| 1464 | static Standard_Integer TestMem (Draw_Interpretor& /*di*/, |
| 1465 | Standard_Integer /*nb*/, |
| 1466 | const char ** /*arg*/) |
| 1467 | { |
| 1468 | TCollection_ExtendedString aString(1024*1024, 'A'); |
| 1469 | return 0; |
| 1470 | } |
| 1471 | |
| 1472 | static Standard_Integer BUC60876_ (Draw_Interpretor& di, |
| 1473 | Standard_Integer argc, |
| 1474 | const char ** argv) |
| 1475 | { |
| 1476 | Handle(AIS_InteractiveContext) aContext = ViewerTest::GetAISContext(); |
| 1477 | if(aContext.IsNull()) { |
| 1478 | di << "use 'vinit' command before " << argv[0] << "\n"; |
| 1479 | return -1; |
| 1480 | } |
| 1481 | if((argc != 2) && (argc != 3)) { |
| 1482 | di<< "usage : " << argv[0] << " shape [mode==1]" << "\n"; |
| 1483 | return -1; |
| 1484 | } |
| 1485 | TopoDS_Shape aShape = DBRep::Get(argv[1]); |
| 1486 | Handle(AIS_InteractiveObject) anIO = new AIS_Shape(aShape); |
| 1487 | // Handle(AIS_InteractiveObject) anIOa = ViewerTest::GetAISShapeFromName(argv[1]); |
| 1488 | anIO->SetHilightMode((argc == 3) ? atoi(argv[2]) : 1); |
| 1489 | aContext->Display(anIO); |
| 1490 | return 0; |
| 1491 | } |
| 1492 | |
| 1493 | //======================================================================= |
| 1494 | //function : buc60773 |
| 1495 | //purpose : |
| 1496 | //======================================================================= |
| 1497 | |
| 1498 | #include<TCollection_HAsciiString.hxx> |
| 1499 | |
| 1500 | static Standard_Integer BUC60773 (Draw_Interpretor& /*di*/, Standard_Integer /*n*/, const char ** /*a*/) |
| 1501 | { |
| 1502 | Handle(TCollection_HAsciiString) hAscii = new TCollection_HAsciiString(); |
| 1503 | Standard_CString aStr = hAscii->ToCString(); |
| 1504 | TCollection_AsciiString aAscii(aStr); |
| 1505 | |
| 1506 | return 0; |
| 1507 | } |
| 1508 | |
| 1509 | #include<BRepPrimAPI_MakeCylinder.hxx> |
| 1510 | #include<BRepPrimAPI_MakeCone.hxx> |
| 1511 | |
| 1512 | static int TestCMD(Draw_Interpretor& di, Standard_Integer argc, const char ** argv) |
| 1513 | |
| 1514 | { |
| 1515 | if(argc > 2) { |
| 1516 | di << "Usage : " << argv[0] << " [BRepAlgoAPI/BRepAlgo = 1/0]" << "\n"; |
| 1517 | return 1; |
| 1518 | } |
| 1519 | Standard_Boolean IsBRepAlgoAPI = Standard_True; |
| 1520 | if (argc == 2) { |
| 1521 | Standard_Integer IsB = atoi(argv[1]); |
| 1522 | if (IsB != 1) { |
| 1523 | IsBRepAlgoAPI = Standard_False; |
| 1524 | #if ! defined(BRepAlgo_def01) |
| 1525 | // di << "Error: There is not BRepAlgo_Fuse class" << "\n"; |
| 1526 | // return 1; |
| 1527 | #endif |
| 1528 | } |
| 1529 | } |
| 1530 | |
| 1531 | //Cylindre 36.085182 20.0 8.431413 88.04671 20.0 38.931416 10.0 |
| 1532 | |
| 1533 | Standard_Real x11 = 36.085182; |
| 1534 | Standard_Real y11 = 20.0; |
| 1535 | Standard_Real z11 = 8.431413; |
| 1536 | Standard_Real x12 = 88.04671; |
| 1537 | Standard_Real y12 = 20.0; |
| 1538 | Standard_Real z12 = 38.931416; |
| 1539 | Standard_Real radius = 10.0; |
| 1540 | |
| 1541 | gp_Pnt base1(x11, y11, z11); |
| 1542 | gp_Dir vect1(x12-x11, y12-y11, z12-z11); |
| 1543 | gp_Ax2 axis1(base1, vect1); |
| 1544 | Standard_Real height1 = sqrt( ((x12-x11)*(x12-x11)) + ((y12-y11)*(y12-y11)) + ((z12-z11)*(z12-z11)) ); |
| 1545 | BRepPrimAPI_MakeCylinder cylinder(axis1, radius, height1); |
| 1546 | |
| 1547 | TopoDS_Shape SCyl = cylinder.Shape(); |
| 1548 | DBRep::Set("cyl", SCyl); |
| 1549 | |
| 1550 | |
| 1551 | //Cone 70.7262 20.0 28.431412 105.36722 20.0 48.431416 6.0 3.0 |
| 1552 | Standard_Real x21 = 70.7262; |
| 1553 | Standard_Real y21 = 20.0; |
| 1554 | Standard_Real z21 = 28.431412; |
| 1555 | Standard_Real x22 = 105.36722; |
| 1556 | Standard_Real y22 = 20.0; |
| 1557 | Standard_Real z22 = 48.431416; |
| 1558 | Standard_Real radius1 = 6.0; |
| 1559 | Standard_Real radius2 = 3.0; |
| 1560 | |
| 1561 | gp_Pnt base2(x21, y21, z21); |
| 1562 | gp_Dir vect2(x22-x21, y22-y21, z22-z21); |
| 1563 | gp_Ax2 axis2(base2, vect2); |
| 1564 | Standard_Real height2 = sqrt( ((x22-x21)*(x22-x21)) + ((y22-y21)*(y22-y21)) + ((z22-z21)*(z22-z21)) ); |
| 1565 | BRepPrimAPI_MakeCone cone(axis2, radius1, radius2, height2); |
| 1566 | |
| 1567 | TopoDS_Shape SCon = cone.Shape(); |
| 1568 | DBRep::Set("con", SCon); |
| 1569 | |
| 1570 | //#if ! defined(BRepAlgoAPI_def01) |
| 1571 | // BRepAlgoAPI_Fuse SFuse(SCyl, SCon); |
| 1572 | //#else |
| 1573 | // BRepAlgo_Fuse SFuse(SCyl, SCon); |
| 1574 | //#endif |
| 1575 | // |
| 1576 | // if(! SFuse.IsDone() ) |
| 1577 | // cout<<"Error: Boolean fuse operation failed !"<<endl; |
| 1578 | // |
| 1579 | // TopoDS_Shape fuse = SFuse.Shape(); |
| 1580 | |
| 1581 | TopoDS_Shape fuse; |
| 1582 | if (IsBRepAlgoAPI) { |
| 1583 | di << "BRepAlgoAPI_Fuse SFuse(SCyl, SCon)" <<"\n"; |
| 1584 | BRepAlgoAPI_Fuse SFuse(SCyl, SCon); |
| 1585 | if(! SFuse.IsDone() ) |
| 1586 | di<<"Error: Boolean fuse operation failed !"<<"\n"; |
| 1587 | fuse = SFuse.Shape(); |
| 1588 | } else { |
| 1589 | di << "BRepAlgo_Fuse SFuse(SCyl, SCon)" <<"\n"; |
| 1590 | BRepAlgo_Fuse SFuse(SCyl, SCon); |
| 1591 | if(! SFuse.IsDone() ) |
| 1592 | di<<"Error: Boolean fuse operation failed !"<<"\n"; |
| 1593 | fuse = SFuse.Shape(); |
| 1594 | } |
| 1595 | |
| 1596 | DBRep::Set("fus", fuse); |
| 1597 | |
| 1598 | return 0; |
| 1599 | } |
| 1600 | |
| 1601 | #include <Dico_DictionaryOfInteger.hxx> |
| 1602 | #include <TColStd_HSequenceOfAsciiString.hxx> |
| 1603 | #include <TopExp.hxx> |
| 1604 | #include <TopoDS_Iterator.hxx> |
| 1605 | |
| 1606 | //--------------------------------------------------------------------------------------- |
| 1607 | |
| 1608 | static Standard_Integer statface (Draw_Interpretor& di,Standard_Integer /*argc*/, const char ** argv ) |
| 1609 | |
| 1610 | { |
| 1611 | TopoDS_Shape aShape = DBRep::Get(argv[1]); |
| 1612 | if(aShape.IsNull()) |
| 1613 | { |
| 1614 | di<<"Invalid input shape"<<"\n"; |
| 1615 | return 1; |
| 1616 | } |
| 1617 | Handle(Dico_DictionaryOfInteger) aDico = new Dico_DictionaryOfInteger(); |
| 1618 | Handle(TColStd_HSequenceOfAsciiString) aSequence = new TColStd_HSequenceOfAsciiString; |
| 1619 | Standard_CString aString; |
| 1620 | Standard_Integer i=1,j=1,k=1,l=1,aa=1; |
| 1621 | TopExp_Explorer expl; |
| 1622 | Standard_Real f3d,l3d; |
| 1623 | for(expl.Init(aShape,TopAbs_FACE);expl.More();expl.Next()) |
| 1624 | { |
| 1625 | // SURFACES |
| 1626 | TopoDS_Face aFace = TopoDS::Face (expl.Current()); |
| 1627 | Handle(Geom_Surface) aSurface = BRep_Tool::Surface(aFace); |
| 1628 | aString = aSurface->DynamicType()->Name(); |
| 1629 | |
| 1630 | if(aDico->GetItem(aString,aa) != 0) |
| 1631 | { |
| 1632 | aDico->GetItem(aString,aa); |
| 1633 | aDico->SetItem(aString,aa+1); |
| 1634 | } else { |
| 1635 | aDico->SetItem(aString,1); |
| 1636 | aSequence->Append(aString); |
| 1637 | aa=1; |
| 1638 | i++; |
| 1639 | } |
| 1640 | } |
| 1641 | // PCURVES |
| 1642 | for(expl.Init(aShape,TopAbs_FACE);expl.More();expl.Next()) |
| 1643 | { |
| 1644 | TopoDS_Face aFace = TopoDS::Face (expl.Current()); |
| 1645 | TopoDS_Iterator anIt(aFace); |
| 1646 | TopoDS_Wire aWire = TopoDS::Wire (anIt.Value()); |
| 1647 | TopoDS_Iterator it (aWire); |
| 1648 | for (; it.More(); it.Next()) { |
| 1649 | TopoDS_Edge Edge = TopoDS::Edge (it.Value()); |
| 1650 | Handle(Geom2d_Curve) aCurve2d = BRep_Tool::CurveOnSurface(Edge,aFace,f3d,l3d); |
| 1651 | aString = aCurve2d->DynamicType()->Name(); |
| 1652 | if(aDico->GetItem(aString,aa) != 0) |
| 1653 | { |
| 1654 | aDico->GetItem(aString,aa); |
| 1655 | aDico->SetItem(aString,aa+1); |
| 1656 | } else { |
| 1657 | aDico->SetItem(aString,1); |
| 1658 | aSequence->Append(aString); |
| 1659 | i++; |
| 1660 | aa=1; |
| 1661 | } |
| 1662 | } |
| 1663 | } |
| 1664 | // 3d CURVES |
| 1665 | TopExp_Explorer exp; |
| 1666 | for (exp.Init(aShape,TopAbs_EDGE); exp.More(); exp.Next()) |
| 1667 | { |
| 1668 | TopoDS_Edge Edge = TopoDS::Edge (exp.Current()); |
| 1669 | Handle(Geom_Curve) aCurve3d = BRep_Tool::Curve (Edge,f3d,l3d); |
| 1670 | if(aCurve3d.IsNull()) |
| 1671 | { |
| 1672 | l++; |
| 1673 | goto aLabel; |
| 1674 | } |
| 1675 | aString = aCurve3d->DynamicType()->Name(); |
| 1676 | if(aDico->GetItem(aString,aa) != 0) |
| 1677 | { |
| 1678 | aDico->GetItem(aString,aa); |
| 1679 | aDico->SetItem(aString,aa+1); |
| 1680 | } else { |
| 1681 | aDico->SetItem(aString,1); |
| 1682 | aSequence->Append(aString); |
| 1683 | i++; |
| 1684 | aa=1; |
| 1685 | } |
| 1686 | aLabel:; |
| 1687 | } |
| 1688 | // Output |
| 1689 | di<<"\n"; |
| 1690 | for(j=1;j<i;j++) |
| 1691 | { |
| 1692 | aDico->GetItem(aSequence->Value(j),aa); |
| 1693 | di<<aa<<" -- "<<aSequence->Value(j).ToCString()<<"\n"; |
| 1694 | } |
| 1695 | |
| 1696 | di<<"\n"; |
| 1697 | di<<"Degenerated edges :"<<"\n"; |
| 1698 | di<<l<<" -- "<<"Degenerated edges "<<"\n"; |
| 1699 | |
| 1700 | return 0; |
| 1701 | |
| 1702 | } |
| 1703 | |
| 1704 | #include <BRepBuilderAPI_Transform.hxx> |
| 1705 | |
| 1706 | static Standard_Integer BUC60841(Draw_Interpretor& di, Standard_Integer argc, const char ** argv ) |
| 1707 | { |
| 1708 | if(argc > 2) { |
| 1709 | di << "Usage : " << argv[0] << " [BRepAlgoAPI/BRepAlgo = 1/0]" << "\n"; |
| 1710 | return 1; |
| 1711 | } |
| 1712 | Standard_Boolean IsBRepAlgoAPI = Standard_True; |
| 1713 | if (argc == 2) { |
| 1714 | Standard_Integer IsB = atoi(argv[1]); |
| 1715 | if (IsB != 1) { |
| 1716 | IsBRepAlgoAPI = Standard_False; |
| 1717 | #if ! defined(BRepAlgo_def01) |
| 1718 | // di << "Error: There is not BRepAlgo_Fuse class" << "\n"; |
| 1719 | // return 1; |
| 1720 | #endif |
| 1721 | } |
| 1722 | } |
| 1723 | |
| 1724 | gp_Ax2 Ax2 = gp_Ax2(gp_Pnt(0, 621, 78), gp_Dir(0, 1,0)); |
| 1725 | BRepPrimAPI_MakeCylinder cyl(Ax2, 260, 150); |
| 1726 | //BRepPrimAPI_MakeCylinder cyl(gp_Ax2(gp_Pnt(0, 621, 78), gp_Dir(0, 1,0)), 260, 150); |
| 1727 | |
| 1728 | TopoDS_Shape sh1 = cyl.Shape(); |
| 1729 | DBRep::Set("sh1",sh1); |
| 1730 | gp_Trsf trsf1, trsf2; |
| 1731 | trsf1.SetTranslation(gp_Pnt(0.000000,700.000000,-170.000000), |
| 1732 | gp_Pnt(0.000000,700.000000,-95.000000)); |
| 1733 | trsf2.SetRotation(gp_Ax1(gp_Pnt(0.000000,700.000000,-170.000000), |
| 1734 | gp_Dir(0.000000,0.000000,1.000000)), 0.436111); |
| 1735 | BRepBuilderAPI_Transform trans1(sh1, trsf1); |
| 1736 | TopoDS_Shape sh2 = trans1.Shape(); |
| 1737 | DBRep::Set("sh2",sh2); |
| 1738 | |
| 1739 | //#if ! defined(BRepAlgoAPI_def01) |
| 1740 | // BRepAlgoAPI_Fuse fuse1(sh1, sh2); |
| 1741 | //#else |
| 1742 | // BRepAlgo_Fuse fuse1(sh1, sh2); |
| 1743 | //#endif |
| 1744 | // |
| 1745 | // TopoDS_Shape fsh1 = fuse1.Shape(); |
| 1746 | |
| 1747 | TopoDS_Shape fsh1; |
| 1748 | if (IsBRepAlgoAPI) { |
| 1749 | di << "BRepAlgoAPI_Fuse fuse1(sh1, sh2)" <<"\n"; |
| 1750 | BRepAlgoAPI_Fuse fuse1(sh1, sh2); |
| 1751 | fsh1 = fuse1.Shape(); |
| 1752 | } else { |
| 1753 | di << "BRepAlgo_Fuse fuse1(sh1, sh2)" <<"\n"; |
| 1754 | BRepAlgo_Fuse fuse1(sh1, sh2); |
| 1755 | fsh1 = fuse1.Shape(); |
| 1756 | } |
| 1757 | |
| 1758 | DBRep::Set("fsh1",fsh1); |
| 1759 | BRepBuilderAPI_Transform trans2(fsh1, trsf2); |
| 1760 | TopoDS_Shape sh3 = trans2.Shape(); |
| 1761 | DBRep::Set("sh3",sh3); |
| 1762 | |
| 1763 | //#if ! defined(BRepAlgoAPI_def01) |
| 1764 | // BRepAlgoAPI_Fuse fuse2(fsh1,sh3); |
| 1765 | //#else |
| 1766 | // BRepAlgo_Fuse fuse2(fsh1,sh3); |
| 1767 | //#endif |
| 1768 | // |
| 1769 | // TopoDS_Shape fsh2 = fuse2.Shape(); |
| 1770 | |
| 1771 | TopoDS_Shape fsh2; |
| 1772 | if (IsBRepAlgoAPI) { |
| 1773 | di << "BRepAlgoAPI_Fuse fuse2(fsh1,sh3)" <<"\n"; |
| 1774 | BRepAlgoAPI_Fuse fuse2(fsh1,sh3); |
| 1775 | fsh2 = fuse2.Shape(); |
| 1776 | } else { |
| 1777 | di << "BRepAlgo_Fuse fuse2(fsh1,sh3)" <<"\n"; |
| 1778 | BRepAlgo_Fuse fuse2(fsh1,sh3); |
| 1779 | fsh2 = fuse2.Shape(); |
| 1780 | } |
| 1781 | |
| 1782 | DBRep::Set("fsh2",fsh2); |
| 1783 | Handle_AIS_Shape aisp1 = new AIS_Shape(fsh2); |
| 1784 | // aContext->Display(aisp1); |
| 1785 | return 0; |
| 1786 | } |
| 1787 | |
| 1788 | #include <ShapeBuild_Edge.hxx> |
| 1789 | |
| 1790 | static Standard_Integer BUC60874(Draw_Interpretor& /*di*/, Standard_Integer /*argc*/, const char ** argv ) |
| 1791 | { |
| 1792 | TopoDS_Edge e = TopoDS::Edge(DBRep::Get(argv[1],TopAbs_EDGE)); |
| 1793 | ShapeBuild_Edge().BuildCurve3d(e); |
| 1794 | DBRep::Set("ED",e); |
| 1795 | return 0; |
| 1796 | } |
| 1797 | |
| 1798 | |
| 1799 | #include<TDF_Label.hxx> |
| 1800 | #include<TDataStd_TreeNode.hxx> |
| 1801 | |
| 1802 | #include<DDocStd.hxx> |
| 1803 | |
| 1804 | #include<DDF.hxx> |
| 1805 | |
| 1806 | #include<TDocStd_Modified.hxx> |
| 1807 | #include<TDF_ListIteratorOfDeltaList.hxx> |
| 1808 | #include<TDocStd_Document.hxx> |
| 1809 | #include<TDocStd_Application.hxx> |
| 1810 | #include<TDF_Delta.hxx> |
| 1811 | #include<TDataXtd_Constraint.hxx> |
| 1812 | #include<TPrsStd_AISPresentation.hxx> |
| 1813 | #include<TPrsStd_AISViewer.hxx> |
| 1814 | #include<TNaming_Builder.hxx> |
| 1815 | #include<TNaming_Naming.hxx> |
| 1816 | #include<TNaming_NamedShape.hxx> |
| 1817 | |
| 1818 | static int BUC60817(Draw_Interpretor& di, Standard_Integer argc, const char ** argv) { |
| 1819 | if(argc!=2) { |
| 1820 | di << "Usage : " << argv[0] << " D" << "\n"; |
| 1821 | di<<1; |
| 1822 | return 0; |
| 1823 | } |
| 1824 | |
| 1825 | Handle(TDF_Data) DF; |
| 1826 | if (!DDF::GetDF(argv[1],DF)) {di<<2;return 0;} |
| 1827 | |
| 1828 | TDF_Label L1,L2; |
| 1829 | Handle(TDataStd_TreeNode) TN1,TN2; |
| 1830 | |
| 1831 | DDF::AddLabel(DF,"0:2",L1); |
| 1832 | TN1 = TDataStd_TreeNode::Set(L1); |
| 1833 | |
| 1834 | DDF::AddLabel(DF,"0:3",L2); |
| 1835 | TN2 = TDataStd_TreeNode::Set(L2); |
| 1836 | |
| 1837 | TN1->Append(TN2); |
| 1838 | if(!(TN2->IsDescendant(TN1))) {di<<3;return 0;} |
| 1839 | if((TN1->IsDescendant(TN2))) {di<<4;return 0;} |
| 1840 | |
| 1841 | di<<0; |
| 1842 | return 0; |
| 1843 | } |
| 1844 | |
| 1845 | static int BUC60831_1(Draw_Interpretor& di, Standard_Integer argc, const char ** argv) { |
| 1846 | if(argc!=2) { |
| 1847 | di << "Usage : " << argv[0] << " D" << "\n"; |
| 1848 | di<<-1; |
| 1849 | return 0; |
| 1850 | } |
| 1851 | |
| 1852 | Handle(TDF_Data) DF; |
| 1853 | if (!DDF::GetDF(argv[1],DF)) {di<<-2;return 0;} |
| 1854 | |
| 1855 | TDF_Label L; |
| 1856 | DDF::FindLabel(DF,"0:1",L,Standard_False); |
| 1857 | Handle(TDocStd_Modified) MDF; |
| 1858 | if (!L.Root().FindAttribute (TDocStd_Modified::GetID(), MDF)) { |
| 1859 | MDF = new TDocStd_Modified(); |
| 1860 | L.Root().AddAttribute(MDF); |
| 1861 | } |
| 1862 | |
| 1863 | di<<!MDF->IsEmpty(); |
| 1864 | return 0; |
| 1865 | } |
| 1866 | |
| 1867 | static int BUC60831_2(Draw_Interpretor& di, Standard_Integer argc, const char ** argv) { |
| 1868 | if(argc!=3) { |
| 1869 | di << "Usage : " << argv[0] << " D Label" << "\n"; |
| 1870 | di<<1; |
| 1871 | return 0; |
| 1872 | } |
| 1873 | |
| 1874 | Handle(TDF_Data) DF; |
| 1875 | if (!DDF::GetDF(argv[1],DF)) {di<<2;return 0;} |
| 1876 | |
| 1877 | TDF_Label L; |
| 1878 | DDF::FindLabel(DF,argv[2],L,Standard_False); |
| 1879 | |
| 1880 | TDocStd_Modified::Add(L); |
| 1881 | |
| 1882 | di<<0; |
| 1883 | return 0; |
| 1884 | } |
| 1885 | |
| 1886 | static int BUC60836(Draw_Interpretor& di, Standard_Integer argc, const char ** argv) { |
| 1887 | if(argc!=2) { |
| 1888 | di << "Usage : " << argv[0] << " D" << "\n"; |
| 1889 | di<<1; |
| 1890 | return 0; |
| 1891 | } |
| 1892 | |
| 1893 | |
| 1894 | Handle(TDF_Data) aDF; |
| 1895 | if (!DDF::GetDF(argv[1],aDF)) {di<<2;return 0;} |
| 1896 | |
| 1897 | Handle(TDocStd_Document) aDocument; |
| 1898 | if (!DDocStd::GetDocument(argv[1], aDocument)) {di<<3;return 0;} |
| 1899 | |
| 1900 | TDF_Label L; |
| 1901 | Handle(TDataStd_TreeNode) TN; |
| 1902 | |
| 1903 | aDocument->NewCommand(); |
| 1904 | DDF::AddLabel(aDF,"0:2",L); |
| 1905 | TN = TDataStd_TreeNode::Set(L); |
| 1906 | |
| 1907 | aDocument->NewCommand(); |
| 1908 | DDF::AddLabel(aDF,"0:3",L); |
| 1909 | TN = TDataStd_TreeNode::Set(L); |
| 1910 | |
| 1911 | aDocument->NewCommand(); |
| 1912 | DDF::AddLabel(aDF,"0:4",L); |
| 1913 | TN = TDataStd_TreeNode::Set(L); |
| 1914 | aDocument->NewCommand(); |
| 1915 | |
| 1916 | TDF_DeltaList Us,Rs; |
| 1917 | Us = aDocument->GetUndos(); |
| 1918 | Rs = aDocument->GetUndos(); |
| 1919 | |
| 1920 | Standard_Integer i; |
| 1921 | char Names[10][5]={"n1","n2","n3","n4","n5","n6","n7","n8","n9","n10"}; |
| 1922 | |
| 1923 | TDF_ListIteratorOfDeltaList IDL; |
| 1924 | for(IDL.Initialize(Us),i=1;IDL.More();IDL.Next(),i++){ |
| 1925 | Handle(TDF_Delta) D = IDL.Value(); |
| 1926 | TCollection_ExtendedString S(Names[i-1]); |
| 1927 | D->SetName(S); |
| 1928 | // cout<<" U"<<i<<"="<<D->Name()<<endl; |
| 1929 | } |
| 1930 | |
| 1931 | aDocument->Undo(); |
| 1932 | aDocument->Undo(); |
| 1933 | |
| 1934 | Us = aDocument->GetUndos(); |
| 1935 | Rs = aDocument->GetRedos(); |
| 1936 | |
| 1937 | for(IDL.Initialize(Us),i=1;IDL.More();IDL.Next(),i++){ |
| 1938 | Handle(TDF_Delta) D = IDL.Value(); |
| 1939 | // cout<<" U"<<i<<"="<<D->Name()<<endl; |
| 1940 | } |
| 1941 | |
| 1942 | TCollection_ExtendedString n2name ("n2"); |
| 1943 | for(IDL.Initialize(Rs),i=1;IDL.More();IDL.Next(),i++){ |
| 1944 | Handle(TDF_Delta) D = IDL.Value(); |
| 1945 | if ( i == 1 && ! D->Name().IsEqual (n2name) ) |
| 1946 | { |
| 1947 | di << 4; |
| 1948 | return 0; |
| 1949 | } |
| 1950 | } |
| 1951 | |
| 1952 | di<<0; |
| 1953 | return 0; |
| 1954 | } |
| 1955 | |
| 1956 | static int BUC60847(Draw_Interpretor& di, Standard_Integer argc, const char ** argv) { |
| 1957 | if(argc!=3) { |
| 1958 | di << "Usage : " << argv[0] << " D Shape" << "\n"; |
| 1959 | di<<1; |
| 1960 | return 0; |
| 1961 | } |
| 1962 | |
| 1963 | Handle(TDF_Data) aDF; |
| 1964 | if (!DDF::GetDF(argv[1],aDF)) {di<<2;return 0;} |
| 1965 | |
| 1966 | TopoDS_Shape s = DBRep::Get(argv[2]); |
| 1967 | if (s.IsNull()) { di <<"shape not found"<< "\n"; di<<3;return 0;} |
| 1968 | TDF_Label L; |
| 1969 | DDF::AddLabel(aDF, "0:2", L); |
| 1970 | TNaming_Builder SI (L); |
| 1971 | SI.Generated(s); |
| 1972 | |
| 1973 | Handle(TNaming_NamedShape) NS = new TNaming_NamedShape; |
| 1974 | |
| 1975 | TNaming_Naming aNN; |
| 1976 | NS=aNN.Name(L,s,s); |
| 1977 | // if (!NS->IsEmpty()) {di<<3;return 0;} |
| 1978 | if (NS->IsEmpty()) {di<<4;return 0;} |
| 1979 | di<<0; |
| 1980 | return 0; |
| 1981 | } |
| 1982 | |
| 1983 | static int BUC60862(Draw_Interpretor& di, Standard_Integer argc, const char ** argv) { |
| 1984 | if(argc!=3) { |
| 1985 | di << "Usage : " << argv[0] << " D Shape" << "\n"; |
| 1986 | di<<1; |
| 1987 | return 0; |
| 1988 | } |
| 1989 | |
| 1990 | Handle(TDF_Data) aDF; |
| 1991 | if (!DDF::GetDF(argv[1],aDF)) {di<<2;return 0;} |
| 1992 | |
| 1993 | TopoDS_Shape s = DBRep::Get(argv[2]); |
| 1994 | if (s.IsNull()) { di <<"shape not found"<< "\n"; di<<3;return 0;} |
| 1995 | TDF_Label L; |
| 1996 | DDF::AddLabel(aDF, "0:2", L); |
| 1997 | TNaming_Builder SI (L); |
| 1998 | SI.Generated(s); |
| 1999 | |
| 2000 | Handle(TNaming_NamedShape) NS = new TNaming_NamedShape; |
| 2001 | |
| 2002 | TNaming_Naming aNN; |
| 2003 | NS=aNN.Name(L,s,s); |
| 2004 | if (NS->IsEmpty()) {di<<4;return 0;} |
| 2005 | di<<0; |
| 2006 | return 0; |
| 2007 | } |
| 2008 | |
| 2009 | static int BUC60867(Draw_Interpretor& di, Standard_Integer argc, const char ** argv) { |
| 2010 | if (argc == 2) { |
| 2011 | TCollection_ExtendedString path (argv[1]); |
| 2012 | Handle(TDocStd_Application) A; |
| 2013 | if (!DDocStd::Find(A)) {di<<1;return 0;} |
| 2014 | Handle(TDocStd_Document) D; |
| 2015 | Standard_Integer insession = A->IsInSession(path); |
| 2016 | if (insession > 0) { |
| 2017 | di <<"document " << insession << " is already in session" << "\n"; |
| 2018 | di<<2; |
| 2019 | return 0; |
| 2020 | } |
| 2021 | PCDM_ReaderStatus Result = A->Open(path,D); |
| 2022 | if(Result==PCDM_RS_OK){ |
| 2023 | di<<0; |
| 2024 | return 0; |
| 2025 | } |
| 2026 | } |
| 2027 | di<<3; |
| 2028 | return 0; |
| 2029 | } |
| 2030 | |
| 2031 | static int BUC60910(Draw_Interpretor& di, Standard_Integer argc, const char ** argv) { |
| 2032 | if(argc!=2) { |
| 2033 | di << "Usage : " << argv[0] << " D" << "\n"; |
| 2034 | di<<1; |
| 2035 | return 0; |
| 2036 | } |
| 2037 | |
| 2038 | Handle(TDF_Data) aDF; |
| 2039 | if (!DDF::GetDF(argv[1],aDF)) {di<<2;return 0;} |
| 2040 | |
| 2041 | TDF_Label L; |
| 2042 | DDF::AddLabel(aDF, "0:2", L); |
| 2043 | |
| 2044 | Handle(TPrsStd_AISPresentation) AISP = new TPrsStd_AISPresentation; |
| 2045 | |
| 2046 | AISP->Set(L,TDataXtd_Constraint::GetID()); |
| 2047 | |
| 2048 | if (AISP->HasOwnMode()) {di<<3;return 0;} |
| 2049 | AISP->SetMode(3); |
| 2050 | Standard_Integer Mode = AISP->Mode(); |
| 2051 | if (Mode!=3) {di<<4;return 0;} |
| 2052 | if (!AISP->HasOwnMode()) {di<<5;return 0;} |
| 2053 | AISP->UnsetMode(); |
| 2054 | if (AISP->HasOwnMode()) {di<<6;return 0;} |
| 2055 | di<<0; |
| 2056 | return 0; |
| 2057 | } |
| 2058 | |
| 2059 | static int BUC60925(Draw_Interpretor& di, Standard_Integer argc, const char ** argv) { |
| 2060 | if(argc!=2) { |
| 2061 | di << "Usage : " << argv[0] << " D" << "\n"; |
| 2062 | di<<1; |
| 2063 | return 0; |
| 2064 | } |
| 2065 | |
| 2066 | Handle(TDF_Data) aDF; |
| 2067 | if (!DDF::GetDF(argv[1],aDF)) {di<<2;return 0;} |
| 2068 | |
| 2069 | TDF_Label L; |
| 2070 | DDF::AddLabel(aDF, "0:2", L); |
| 2071 | TDF_LabelMap LM; |
| 2072 | LM.Add(L); |
| 2073 | |
| 2074 | Handle(TNaming_NamedShape) NS = new TNaming_NamedShape; |
| 2075 | // Handle(TNaming_Name) NN = new TNaming_Name; |
| 2076 | TNaming_Name NN; |
| 2077 | |
| 2078 | NN.Type(TNaming_IDENTITY); |
| 2079 | NN.Append(NS); |
| 2080 | Standard_Boolean Res = NN.Solve(L,LM); |
| 2081 | |
| 2082 | if (Res!=Standard_False) {di<<3;return 0;} |
| 2083 | di<<0; |
| 2084 | return 0; |
| 2085 | } |
| 2086 | |
| 2087 | static int BUC60932(Draw_Interpretor& di, Standard_Integer argc, const char ** argv) { |
| 2088 | if(argc!=2) { |
| 2089 | di << "Usage : " << argv[0] << " D" << "\n"; |
| 2090 | di<<1; |
| 2091 | return 0; |
| 2092 | } |
| 2093 | |
| 2094 | |
| 2095 | Handle(TDocStd_Document) aDocument; |
| 2096 | if (!DDocStd::GetDocument(argv[1], aDocument)) {di<<2;return 0;} |
| 2097 | |
| 2098 | if(!aDocument->InitDeltaCompaction()) {di<<3;return 0;} |
| 2099 | if(!aDocument->PerformDeltaCompaction()) {di<<4;return 0;} |
| 2100 | |
| 2101 | di<<0; |
| 2102 | return 0; |
| 2103 | } |
| 2104 | |
| 2105 | //======================================================================= |
| 2106 | //function : AISWidth |
| 2107 | //purpose : AISWidth (DOC,entry,[width]) |
| 2108 | // abv: testing command for checking bug BUC60917 in TPrsStd_AISPresentation |
| 2109 | //======================================================================= |
| 2110 | |
| 2111 | static int AISWidth(Draw_Interpretor& di, Standard_Integer argc, const char ** argv) { |
| 2112 | |
| 2113 | if (argc >= 3) { |
| 2114 | Handle(TDocStd_Document) D; |
| 2115 | if (!DDocStd::GetDocument(argv[1],D)) {di<<(-1);return 0;} |
| 2116 | TDF_Label L; |
| 2117 | if (!DDF::FindLabel(D->GetData(),argv[2],L)) {di<<(-2);return 0;} |
| 2118 | |
| 2119 | Handle(TPrsStd_AISViewer) viewer; |
| 2120 | if( !TPrsStd_AISViewer::Find(L, viewer) ) {di<<(-3);return 0;} |
| 2121 | |
| 2122 | Handle(TPrsStd_AISPresentation) prs; |
| 2123 | if(L.FindAttribute( TPrsStd_AISPresentation::GetID(), prs) ) { |
| 2124 | if( argc == 4 ) { |
| 2125 | prs->SetWidth(atof(argv[3])); |
| 2126 | TPrsStd_AISViewer::Update(L); |
| 2127 | } |
| 2128 | else { |
| 2129 | if (prs->HasOwnWidth()){ |
| 2130 | // cout << "Width = " << prs->Width() << endl; |
| 2131 | di<<prs->Width(); |
| 2132 | } |
| 2133 | else{ |
| 2134 | di << "AISWidth: Warning : Width wasn't set" << "\n"; |
| 2135 | di<<(-4); |
| 2136 | } |
| 2137 | } |
| 2138 | return 0; |
| 2139 | } |
| 2140 | } |
| 2141 | di << "AISWidth : Error" << "\n"; |
| 2142 | di<<(-5); |
| 2143 | return 0; |
| 2144 | } |
| 2145 | |
| 2146 | //======================================================================= |
| 2147 | //function : BUC60921 ( & BUC60954 ) |
| 2148 | //purpose : Test memory allocation of OCAF in Undo/Redo operations |
| 2149 | //======================================================================= |
| 2150 | |
| 2151 | static Standard_Integer BUC60921 (Draw_Interpretor& di, |
| 2152 | Standard_Integer nb, |
| 2153 | const char ** arg) |
| 2154 | { |
| 2155 | if (nb >= 4) { |
| 2156 | Handle(TDocStd_Document) D; |
| 2157 | if (!DDocStd::GetDocument(arg[1],D)) {di<<1;return 0;} |
| 2158 | TDF_Label L; |
| 2159 | DDF::AddLabel(D->GetData(),arg[2],L); |
| 2160 | |
| 2161 | BRep_Builder B; |
| 2162 | TopoDS_Shape S; |
| 2163 | BRepTools::Read ( S, arg[3], B ); |
| 2164 | |
| 2165 | TNaming_Builder tnBuild(L); |
| 2166 | tnBuild.Generated(S); |
| 2167 | // di << "File " << arg[3] << " added"; |
| 2168 | di<<0; |
| 2169 | return 0; |
| 2170 | } |
| 2171 | di << "BUC60921 Doc label brep_file: directly read brep file and put shape to the label" << "\n"; |
| 2172 | di<<2; |
| 2173 | return 0; |
| 2174 | } |
| 2175 | |
| 2176 | #include<IGESControl_Reader.hxx> |
| 2177 | #include<BRepPrimAPI_MakeHalfSpace.hxx> |
| 2178 | |
| 2179 | static Standard_Integer BUC60951_(Draw_Interpretor& di, Standard_Integer argc, const char ** a) |
| 2180 | { |
| 2181 | //if(argc!=2) |
| 2182 | // { |
| 2183 | // cerr << "Usage : " << a[0] << " file.igs" << endl; |
| 2184 | // return -1; |
| 2185 | // } |
| 2186 | if(argc < 2 || argc > 3) { |
| 2187 | di << "Usage : " << a[0] << " [BRepAlgoAPI/BRepAlgo = 1/0]" << "\n"; |
| 2188 | return 1; |
| 2189 | } |
| 2190 | Standard_Boolean IsBRepAlgoAPI = Standard_True; |
| 2191 | if (argc == 3) { |
| 2192 | Standard_Integer IsB = atoi(a[2]); |
| 2193 | if (IsB != 1) { |
| 2194 | IsBRepAlgoAPI = Standard_False; |
| 2195 | #if ! defined(BRepAlgo_def01) |
| 2196 | // di << "Error: There is not BRepAlgo_Fuse class" << "\n"; |
| 2197 | // return 1; |
| 2198 | #endif |
| 2199 | } |
| 2200 | } |
| 2201 | |
| 2202 | Handle(AIS_InteractiveContext) myContext = ViewerTest::GetAISContext(); |
| 2203 | |
| 2204 | if(myContext.IsNull()) { |
| 2205 | di << "use 'vinit' command before " << a[0] << "\n"; |
| 2206 | return -1; |
| 2207 | } |
| 2208 | |
| 2209 | // IGESControlStd_Reader reader; |
| 2210 | IGESControl_Reader reader; |
| 2211 | reader.ReadFile(a[1]); |
| 2212 | reader.TransferRoots(); |
| 2213 | TopoDS_Shape shape = reader.OneShape(); |
| 2214 | printf("\n iges1 shape type = %d", shape.ShapeType() ); |
| 2215 | TopTools_IndexedMapOfShape list; |
| 2216 | TopExp::MapShapes(shape, TopAbs_FACE, list); |
| 2217 | printf("\n No. of faces = %d", list.Extent()); |
| 2218 | |
| 2219 | TopoDS_Shell shell; |
| 2220 | BRep_Builder builder; |
| 2221 | builder.MakeShell(shell); |
| 2222 | for(int i=1;i<=list.Extent(); i++) { |
| 2223 | TopoDS_Face face = TopoDS::Face(list.FindKey(i)); |
| 2224 | builder.Add(shell, face); |
| 2225 | } |
| 2226 | |
| 2227 | BRepPrimAPI_MakeHalfSpace half(shell, gp_Pnt(0, 0, 20)); |
| 2228 | TopoDS_Solid sol = half.Solid(); |
| 2229 | gp_Ax2 anAx2(gp_Pnt(-800.0, 0.0, 0), gp_Dir(0, 0, -1)); |
| 2230 | BRepPrimAPI_MakeCylinder cyl(anAx2, 50, 300); |
| 2231 | TopoDS_Shape sh = cyl.Shape(); |
| 2232 | |
| 2233 | //#if ! defined(BRepAlgoAPI_def01) |
| 2234 | // BRepAlgoAPI_Fuse fuse(sol, sh); |
| 2235 | //#else |
| 2236 | // BRepAlgo_Fuse fuse(sol, sh); |
| 2237 | //#endif |
| 2238 | // |
| 2239 | // sh = fuse.Shape(); |
| 2240 | |
| 2241 | if (IsBRepAlgoAPI) { |
| 2242 | di << "BRepAlgoAPI_Fuse fuse(sol, sh)" <<"\n"; |
| 2243 | BRepAlgoAPI_Fuse fuse(sol, sh); |
| 2244 | sh = fuse.Shape(); |
| 2245 | } else { |
| 2246 | di << "BRepAlgo_Fuse fuse(sol, sh)" <<"\n"; |
| 2247 | BRepAlgo_Fuse fuse(sol, sh); |
| 2248 | sh = fuse.Shape(); |
| 2249 | } |
| 2250 | |
| 2251 | Handle(AIS_Shape) res = new AIS_Shape(sh); |
| 2252 | myContext->Display( res ); |
| 2253 | return 0; |
| 2254 | } |
| 2255 | |
| 2256 | void QABUC::Commands(Draw_Interpretor& theCommands) { |
| 2257 | const char *group = "QABUC"; |
| 2258 | |
| 2259 | theCommands.Add("BUC60623","BUC60623 result Shape1 Shape2",__FILE__,BUC60623,group); |
| 2260 | theCommands.Add("BUC60569","BUC60569 shape",__FILE__,BUC60569,group); |
| 2261 | theCommands.Add("BUC60614","BUC60614 shape",__FILE__,BUC60614,group); |
| 2262 | theCommands.Add("BUC60609","BUC60609 shape [name] [interactive (0|1)]",__FILE__,BUC60609,group); |
| 2263 | #if ! defined(WNT) |
| 2264 | theCommands.Add("UKI61075","UKI61075",__FILE__,UKI61075,group); |
| 2265 | #endif |
| 2266 | theCommands.Add("BUC60585",St,__FILE__,BUC60585,group); |
| 2267 | theCommands.Add("BUC60547","BUC60547 name",__FILE__,BUC60547,group); |
| 2268 | theCommands.Add("BUC60632","BUC60632 mode length",__FILE__,BUC60632,group); |
| 2269 | theCommands.Add("BUC60652","BUC60652 face",__FILE__,BUC60652,group); |
| 2270 | theCommands.Add("ksection","ksection resultat shell1 shell2 NbPntMax Toler3d Toler2d RelativeTol",__FILE__,ksection,group); |
| 2271 | theCommands.Add("BUC60682","ksection resultat shell1 shell2 NbPntMax Toler3d Toler2d RelativeTol",__FILE__,ksection,group); |
| 2272 | theCommands.Add("BUC60669","ksection resultat shell1 shell2 NbPntMax Toler3d Toler2d RelativeTol",__FILE__,ksection,group); |
| 2273 | theCommands.Add("PRO19626","ksection resultat shell1 shell2 NbPntMax Toler3d Toler2d RelativeTol",__FILE__,ksection,group); |
| 2274 | theCommands.Add("BUC60574","BUC60574 ",__FILE__,BUC60574,group); |
| 2275 | |
| 2276 | theCommands.Add("BUC60698","BUC60698 [BRepAlgoAPI/BRepAlgo = 1/0]",__FILE__,BUC60698,group); |
| 2277 | |
| 2278 | theCommands.Add("BUC60699","BUC60699 ",__FILE__,BUC60699,group); |
| 2279 | theCommands.Add("GER61394","GER61394 [1/0]",__FILE__,GER61394,group); |
| 2280 | theCommands.Add("GER61351","GER61351 name/object name/r g b/object r g b",__FILE__,setcolor,group); |
| 2281 | theCommands.Add("setcolor","setcolor name/object name/r g b/object r g b",__FILE__,setcolor,group); |
| 2282 | |
| 2283 | theCommands.Add("BUC60726","BUC60726 0/1",__FILE__,BUC60726,group); |
| 2284 | theCommands.Add("BUC60729","BUC60729",__FILE__,BUC60729,group); |
| 2285 | theCommands.Add("BUC60724","BUC60724",__FILE__,BUC60724,group); |
| 2286 | theCommands.Add("BUC60727","BUC60727",__FILE__,BUC60727,group); |
| 2287 | theCommands.Add("BUC60792","BUC60792",__FILE__,BUC60792,group); |
| 2288 | theCommands.Add("BUC60811","BUC60811",__FILE__,BUC60811,group); |
| 2289 | |
| 2290 | theCommands.Add("BUC60825","BUC60825",__FILE__,BUC60825,group); |
| 2291 | |
| 2292 | theCommands.Add("OCC10006","OCC10006 [BRepAlgoAPI/BRepAlgo = 1/0]",__FILE__,OCC10006,group); |
| 2293 | |
| 2294 | theCommands.Add("BUC60856","BUC60856",__FILE__,BUC60856,group); |
| 2295 | |
| 2296 | #if ! defined(WNT) |
| 2297 | theCommands.Add("coordload","load coord from file",__FILE__,coordload); |
| 2298 | #endif |
| 2299 | |
| 2300 | theCommands.Add("TestMem","TestMem",__FILE__,TestMem,group); |
| 2301 | theCommands.Add("BUC60945","BUC60945",__FILE__,TestMem,group); |
| 2302 | theCommands.Add("BUC60876","BUC60876 shape",__FILE__,BUC60876_,group); |
| 2303 | theCommands.Add("BUC60773","BUC60773",__FILE__,BUC60773,group); |
| 2304 | |
| 2305 | theCommands.Add("TestCMD","TestCMD [BRepAlgoAPI/BRepAlgo = 1/0]",__FILE__,TestCMD,group); |
| 2306 | |
| 2307 | theCommands.Add("statface","statface face",__FILE__,statface,group); |
| 2308 | |
| 2309 | theCommands.Add("BUC60841","BUC60841 [BRepAlgoAPI/BRepAlgo = 1/0]",__FILE__,BUC60841,group); |
| 2310 | |
| 2311 | theCommands.Add("BUC60874","BUC60874",__FILE__,BUC60874,group); |
| 2312 | |
| 2313 | theCommands.Add("BUC60817","BUC60817 D",__FILE__,BUC60817,group); |
| 2314 | theCommands.Add("BUC60831_1","BUC60831_1 D",__FILE__,BUC60831_1,group); |
| 2315 | theCommands.Add("BUC60831_2","BUC60831_2 D Label",__FILE__,BUC60831_2,group); |
| 2316 | theCommands.Add("BUC60836","BUC60836 D",__FILE__,BUC60836,group); |
| 2317 | theCommands.Add("BUC60847","BUC60847 D Shape",__FILE__,BUC60847,group); |
| 2318 | theCommands.Add("BUC60862","BUC60862 D Shape",__FILE__,BUC60862,group); |
| 2319 | theCommands.Add("BUC60867","BUC60867",__FILE__,BUC60867,group); |
| 2320 | theCommands.Add("BUC60910","BUC60910 D",__FILE__,BUC60910,group); |
| 2321 | theCommands.Add("BUC60925","BUC60925 D",__FILE__,BUC60925,group); |
| 2322 | theCommands.Add("BUC60932","BUC60932 D",__FILE__,BUC60932,group); |
| 2323 | theCommands.Add("AISWidth","AISWidth (DOC,entry,[width])",__FILE__,AISWidth,group); |
| 2324 | theCommands.Add("BUC60921","BUC60921 Doc label brep_file",__FILE__,BUC60921,group); |
| 2325 | |
| 2326 | theCommands.Add("BUC60951","BUC60951 file.igs [BRepAlgoAPI/BRepAlgo = 1/0]",__FILE__,BUC60951_, group ); |
| 2327 | |
| 2328 | } |