| 1 | # Copyright (c) 2012 OPEN CASCADE SAS |
| 2 | # |
| 3 | # The content of this file is subject to the Open CASCADE Technology Public |
| 4 | # License Version 6.5 (the "License"). You may not use the content of this file |
| 5 | # except in compliance with the License. Please obtain a copy of the License |
| 6 | # at http://www.opencascade.org and read it completely before using this file. |
| 7 | # |
| 8 | # The Initial Developer of the Original Code is Open CASCADE S.A.S., having its |
| 9 | # main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France. |
| 10 | # |
| 11 | # The Original Code and all software distributed under the License is |
| 12 | # distributed on an "AS IS" basis, without warranty of any kind, and the |
| 13 | # Initial Developer hereby disclaims all such warranties, including without |
| 14 | # limitation, any warranties of merchantability, fitness for a particular |
| 15 | # purpose or non-infringement. Please see the License for the specific terms |
| 16 | # and conditions governing the rights and limitations under the License. |
| 17 | |
| 18 | ############################################################################ |
| 19 | # This file defines scripts for execution of OCCT tests. |
| 20 | # It should be loaded automatically when DRAW is started, and provides |
| 21 | # top-level commands starting with 'test'. Type 'help test' to get their |
| 22 | # synopsys. |
| 23 | # See OCCT Tests User Guide for description of the test system. |
| 24 | # |
| 25 | # Note: procedures with names starting with underscore are for internal use |
| 26 | # inside the test system. |
| 27 | ############################################################################ |
| 28 | |
| 29 | # Default verbose level for command _run_test |
| 30 | set _tests_verbose 0 |
| 31 | |
| 32 | # regexp for parsing test case results in summary log |
| 33 | set _test_case_regexp {^CASE\s+([\w.-]+)\s+([\w.-]+)\s+([\w.-]+)\s*:\s*([\w]+)(.*)} |
| 34 | |
| 35 | # Basic command to run indicated test case in DRAW |
| 36 | help test { |
| 37 | Run specified test case |
| 38 | Use: test group grid casename [echo=0] |
| 39 | - If echo is set to 0 (default), log is stored in memory and only summary |
| 40 | is output (the log can be obtained with command "dlog get") |
| 41 | - If echo is set to 1 or "-echo", all commands and results are echoed |
| 42 | immediately, but log is not saved and summary is not produced |
| 43 | } |
| 44 | proc test {group grid casename {echo 0}} { |
| 45 | # get test case paths (will raise error if input is invalid) |
| 46 | _get_test $group $grid $casename dir gridname casefile |
| 47 | |
| 48 | # if echo specified as "-echo", convert it to bool |
| 49 | if { "$echo" == "-echo" } { set echo t } |
| 50 | |
| 51 | # run test |
| 52 | uplevel _run_test $dir $group $gridname $casefile $echo |
| 53 | |
| 54 | # check log |
| 55 | if { ! $echo } { |
| 56 | _check_log $dir $group $gridname $casename [dlog get] |
| 57 | } |
| 58 | |
| 59 | return |
| 60 | } |
| 61 | |
| 62 | # Basic command to run indicated test case in DRAW |
| 63 | help testgrid { |
| 64 | Run all tests, or specified group, or one grid |
| 65 | Use: testgrid [group [grid]] [options...] |
| 66 | Allowed options are: |
| 67 | -parallel N: run N parallel processes (default is number of CPUs, 0 to disable) |
| 68 | -refresh N: save summary logs every N seconds (default 600, minimal 1, 0 to disable) |
| 69 | -outdir dirname: set log directory (should be empty or non-existing) |
| 70 | -overwrite: force writing logs in existing non-empty directory |
| 71 | -xml filename: write XML report for Jenkins (in JUnit-like format) |
| 72 | } |
| 73 | proc testgrid {args} { |
| 74 | global env tcl_platform _tests_verbose |
| 75 | |
| 76 | ###################################################### |
| 77 | # check arguments |
| 78 | ###################################################### |
| 79 | |
| 80 | # check that environment variable defining paths to test scripts is defined |
| 81 | if { ! [info exists env(CSF_TestScriptsPath)] || |
| 82 | [llength $env(CSF_TestScriptsPath)] <= 0 } { |
| 83 | error "Error: Environment variable CSF_TestScriptsPath is not defined" |
| 84 | } |
| 85 | |
| 86 | # treat options |
| 87 | set parallel [_get_nb_cpus] |
| 88 | set refresh 60 |
| 89 | set logdir "" |
| 90 | set overwrite 0 |
| 91 | set xmlfile "" |
| 92 | for {set narg 0} {$narg < [llength $args]} {incr narg} { |
| 93 | set arg [lindex $args $narg] |
| 94 | |
| 95 | # parallel execution |
| 96 | if { $arg == "-parallel" } { |
| 97 | incr narg |
| 98 | if { $narg < [llength $args] && ! [regexp {^-} [lindex $args $narg]] } { |
| 99 | set parallel [expr [lindex $args $narg]] |
| 100 | } else { |
| 101 | error "Option -parallel requires argument" |
| 102 | } |
| 103 | continue |
| 104 | } |
| 105 | |
| 106 | # refresh logs time |
| 107 | if { $arg == "-refresh" } { |
| 108 | incr narg |
| 109 | if { $narg < [llength $args] && ! [regexp {^-} [lindex $args $narg]] } { |
| 110 | set refresh [expr [lindex $args $narg]] |
| 111 | } else { |
| 112 | error "Option -refresh requires argument" |
| 113 | } |
| 114 | continue |
| 115 | } |
| 116 | |
| 117 | # output directory |
| 118 | if { $arg == "-outdir" } { |
| 119 | incr narg |
| 120 | if { $narg < [llength $args] && ! [regexp {^-} [lindex $args $narg]] } { |
| 121 | set logdir [lindex $args $narg] |
| 122 | } else { |
| 123 | error "Option -outdir requires argument" |
| 124 | } |
| 125 | continue |
| 126 | } |
| 127 | |
| 128 | # allow overwrite logs |
| 129 | if { $arg == "-overwrite" } { |
| 130 | set overwrite 1 |
| 131 | continue |
| 132 | } |
| 133 | |
| 134 | # refresh logs time |
| 135 | if { $arg == "-xml" } { |
| 136 | incr narg |
| 137 | if { $narg < [llength $args] && ! [regexp {^-} [lindex $args $narg]] } { |
| 138 | set xmlfile [lindex $args $narg] |
| 139 | } |
| 140 | if { $xmlfile == "" } { |
| 141 | set xmlfile TESTS-summary.xml |
| 142 | } |
| 143 | continue |
| 144 | } |
| 145 | |
| 146 | # unsupported option |
| 147 | if { [regexp {^-} $arg] } { |
| 148 | error "Error: unsupported option \"$arg\"" |
| 149 | } |
| 150 | |
| 151 | # treat arguments not recognized as options as group and grid names |
| 152 | if { ! [info exists groupname] } { |
| 153 | set groupname $arg |
| 154 | } elseif { ! [info exists gridname] } { |
| 155 | set gridname $arg |
| 156 | } else { |
| 157 | error "Error: cannot interpret argument $narg ($arg): both group and grid names are already defined by previous args!" |
| 158 | } |
| 159 | } |
| 160 | |
| 161 | # check that target log directory is empty or does not exist |
| 162 | set logdir [file normalize [string trim $logdir]] |
| 163 | if { $logdir == "" } { |
| 164 | # if specified logdir is empty string, generate unique name like |
| 165 | # results_<branch>_<timestamp> |
| 166 | set prefix "results" |
| 167 | if { ! [catch {exec git branch} gitout] && |
| 168 | [regexp {[*] ([\w]+)} $gitout res branch] } { |
| 169 | set prefix "${prefix}_$branch" |
| 170 | } |
| 171 | set logdir "${prefix}_[clock format [clock seconds] -format {%Y-%m-%dT%H%M}]" |
| 172 | set logdir [file normalize $logdir] |
| 173 | } |
| 174 | if { [file isdirectory $logdir] && ! $overwrite && ! [catch {glob -directory $logdir *}] } { |
| 175 | error "Error: Specified log directory \"$logdir\" is not empty; please clean it before running tests" |
| 176 | } |
| 177 | if { [catch {file mkdir $logdir}] || ! [file writable $logdir] } { |
| 178 | error "Error: Cannot create directory \"$logdir\", or it is not writable" |
| 179 | } |
| 180 | |
| 181 | ###################################################### |
| 182 | # prepare list of tests to be performed |
| 183 | ###################################################### |
| 184 | |
| 185 | # list of tests, each defined by a list of: |
| 186 | # test scripts directory |
| 187 | # group (subfolder) name |
| 188 | # grid (subfolder) name |
| 189 | # test case name |
| 190 | # path to test case file |
| 191 | set tests_list {} |
| 192 | |
| 193 | # iterate by all script paths |
| 194 | foreach dir [_split_path $env(CSF_TestScriptsPath)] { |
| 195 | # protection against empty paths |
| 196 | set dir [string trim $dir] |
| 197 | if { $dir == "" } { continue } |
| 198 | |
| 199 | if { $_tests_verbose > 0 } { _log_and_puts log "Examining tests directory $dir" } |
| 200 | |
| 201 | # check that directory exists |
| 202 | if { ! [file isdirectory $dir] } { |
| 203 | _log_and_puts log "Warning: directory $dir listed in CSF_TestScriptsPath does not exist, skipped" |
| 204 | continue |
| 205 | } |
| 206 | |
| 207 | # if test group is specified, check that directory with given name exists in this dir |
| 208 | # if not, continue to the next test dir |
| 209 | if { [info exists groupname] && $groupname != "" } { |
| 210 | if { [file isdirectory $dir/$groupname] } { |
| 211 | set groups $groupname |
| 212 | } else { |
| 213 | continue |
| 214 | } |
| 215 | } else { |
| 216 | # else search all directories in the current dir |
| 217 | if [catch {glob -directory $dir -tail -types d *} groups] { continue } |
| 218 | } |
| 219 | |
| 220 | # iterate by groups |
| 221 | if { $_tests_verbose > 0 } { _log_and_puts log "Groups to be executed: $groups" } |
| 222 | foreach group [lsort -dictionary $groups] { |
| 223 | if { $_tests_verbose > 0 } { _log_and_puts log "Examining group directory $group" } |
| 224 | |
| 225 | # file grids.list must exist: it defines sequence of grids in the group |
| 226 | if { ! [file exists $dir/$group/grids.list] } { |
| 227 | _log_and_puts log "Warning: directory $dir/$group does not contain file grids.list, skipped" |
| 228 | continue |
| 229 | } |
| 230 | |
| 231 | # read grids.list file and make a list of grids to be executed |
| 232 | set gridlist {} |
| 233 | set fd [open $dir/$group/grids.list] |
| 234 | set nline 0 |
| 235 | while { [gets $fd line] >= 0 } { |
| 236 | incr nline |
| 237 | |
| 238 | # skip comments and empty lines |
| 239 | if { [regexp "\[ \t\]*\#.*" $line] } { continue } |
| 240 | if { [string trim $line] == "" } { continue } |
| 241 | |
| 242 | # get grid id and name |
| 243 | if { ! [regexp "^\(\[0-9\]+\)\[ \t\]*\(\[A-Za-z0-9_.-\]+\)\$" $line res gridid grid] } { |
| 244 | _log_and_puts log "Warning: cannot recognize line $nline in file $dir/$group/grids.list as \"gridid gridname\"; ignored" |
| 245 | continue |
| 246 | } |
| 247 | |
| 248 | # if specific grid is requested, check that it is present; otherwise make complete list |
| 249 | if { ! [info exists gridname] || $gridname == "" || $gridname == $gridid || $gridname == $grid } { |
| 250 | lappend gridlist $grid |
| 251 | } |
| 252 | } |
| 253 | close $fd |
| 254 | |
| 255 | # iterate by all grids |
| 256 | foreach grid $gridlist { |
| 257 | |
| 258 | # check if this grid is aliased to another one |
| 259 | set griddir $dir/$group/$grid |
| 260 | if { [file exists $griddir/cases.list] } { |
| 261 | set fd [open $griddir/cases.list] |
| 262 | if { [gets $fd line] >= 0 } { |
| 263 | set griddir [file normalize $dir/$group/$grid/[string trim $line]] |
| 264 | } |
| 265 | close $fd |
| 266 | } |
| 267 | |
| 268 | # check if grid directory actually exists |
| 269 | if { ! [file isdirectory $griddir] } { |
| 270 | _log_and_puts log "Error: tests directory for grid $grid ($griddir) is missing; skipped" |
| 271 | continue |
| 272 | } |
| 273 | |
| 274 | # create directory for logging test results |
| 275 | if { $logdir != "" } { file mkdir $logdir/$group/$grid } |
| 276 | |
| 277 | # iterate by all tests in the grid directory |
| 278 | if { [catch {glob -directory $griddir -type f *} testfiles] } { continue } |
| 279 | foreach casefile [lsort -dictionary $testfiles] { |
| 280 | # filter out begin and end files |
| 281 | set casename [file tail $casefile] |
| 282 | if { $casename == "begin" || $casename == "end" } { continue } |
| 283 | |
| 284 | lappend tests_list [list $dir $group $grid $casename $casefile] |
| 285 | } |
| 286 | } |
| 287 | } |
| 288 | } |
| 289 | if { [llength $tests_list] < 1 } { |
| 290 | error "Error: no tests are found, check you input arguments and variable CSF_TestScriptsPath!" |
| 291 | } |
| 292 | |
| 293 | ###################################################### |
| 294 | # run tests |
| 295 | ###################################################### |
| 296 | |
| 297 | # log command arguments and environment |
| 298 | lappend log "Command: testgrid $args" |
| 299 | lappend log "Host: [info hostname]" |
| 300 | lappend log "Started on: [clock format [clock seconds] -format {%Y-%m-%d %H:%M:%S}]" |
| 301 | catch {lappend log "DRAW build:\n[dversion]" } |
| 302 | lappend log "Environment:" |
| 303 | foreach envar [lsort [array names env]] { |
| 304 | lappend log "$envar=\"$env($envar)\"" |
| 305 | } |
| 306 | lappend log "" |
| 307 | |
| 308 | set refresh_timer [clock seconds] |
| 309 | uplevel dchrono _timer reset |
| 310 | uplevel dchrono _timer start |
| 311 | |
| 312 | # if parallel execution is requested, allocate thread pool |
| 313 | if { $parallel > 0 } { |
| 314 | if { ! [info exists tcl_platform(threaded)] || [catch {package require Thread}] } { |
| 315 | _log_and_puts log "Warning: Tcl package Thread is not available, running in sequential mode" |
| 316 | set parallel 0 |
| 317 | } else { |
| 318 | set worker [tpool::create -minworkers $parallel -maxworkers $parallel] |
| 319 | # suspend the pool until all jobs are posted, to prevent blocking of the process |
| 320 | # of starting / processing jobs by running threads |
| 321 | catch {tpool::suspend $worker} |
| 322 | if { $_tests_verbose > 0 } { _log_and_puts log "Executing tests in (up to) $parallel threads" } |
| 323 | # limit number of jobs in the queue by reasonable value |
| 324 | # to prevent slowdown due to unnecessary queue processing |
| 325 | set nbpooled 0 |
| 326 | set nbpooled_max [expr 10 * $parallel] |
| 327 | set nbpooled_ok [expr 5 * $parallel] |
| 328 | } |
| 329 | } |
| 330 | |
| 331 | # start test cases |
| 332 | set userbreak 0 |
| 333 | foreach test_def $tests_list { |
| 334 | # check for user break |
| 335 | if { $userbreak || "[info commands dbreak]" == "dbreak" && [catch dbreak] } { |
| 336 | set userbreak 1 |
| 337 | break |
| 338 | } |
| 339 | |
| 340 | set dir [lindex $test_def 0] |
| 341 | set group [lindex $test_def 1] |
| 342 | set grid [lindex $test_def 2] |
| 343 | set casename [lindex $test_def 3] |
| 344 | set casefile [lindex $test_def 4] |
| 345 | |
| 346 | # command to set tests for generation of image in results directory |
| 347 | set imgdir_cmd "" |
| 348 | if { $logdir != "" } { set imgdir_cmd "set imagedir $logdir/$group/$grid" } |
| 349 | |
| 350 | # prepare command file for running test case in separate instance of DRAW |
| 351 | set fd_cmd [open $logdir/$group/$grid/${casename}.tcl w] |
| 352 | puts $fd_cmd "$imgdir_cmd" |
| 353 | puts $fd_cmd "set test_image $casename" |
| 354 | puts $fd_cmd "_run_test $dir $group $grid $casefile t" |
| 355 | |
| 356 | # use dlog command to obtain complete output of the test when it is absent (i.e. since OCCT 6.6.0) |
| 357 | # note: this is not needed if echo is set to 1 in call to _run_test above |
| 358 | if { ! [catch {dlog get}] } { |
| 359 | puts $fd_cmd "puts \[dlog get\]" |
| 360 | } else { |
| 361 | # else try to use old-style QA_ variables to get more output... |
| 362 | set env(QA_DUMP) 1 |
| 363 | set env(QA_DUP) 1 |
| 364 | set env(QA_print_command) 1 |
| 365 | } |
| 366 | |
| 367 | # final 'exit' is needed when running on Linux under VirtualGl |
| 368 | puts $fd_cmd "exit" |
| 369 | close $fd_cmd |
| 370 | |
| 371 | # commant to run DRAW with a command file; |
| 372 | # note that empty string is passed as standard input to avoid possible |
| 373 | # hang-ups due to waiting for stdin of the launching process |
| 374 | set command "exec <<{} DRAWEXE -f $logdir/$group/$grid/${casename}.tcl" |
| 375 | |
| 376 | # alternative method to run without temporary file; disabled as it needs too many backslashes |
| 377 | # else { |
| 378 | # set command "exec <<\"\" DRAWEXE -c $imgdir_cmd\\\; set test_image $casename\\\; \ |
| 379 | # _run_test $dir $group $grid $casefile\\\; \ |
| 380 | # puts \\\[dlog get\\\]\\\; exit" |
| 381 | # } |
| 382 | |
| 383 | # run test case, either in parallel or sequentially |
| 384 | if { $parallel > 0 } { |
| 385 | # parallel execution |
| 386 | set job [tpool::post -nowait $worker "catch \"$command\" output; return \$output"] |
| 387 | set job_def($job) [list $logdir $dir $group $grid $casename] |
| 388 | incr nbpooled |
| 389 | if { $nbpooled > $nbpooled_max } { |
| 390 | _testgrid_process_jobs $worker $nbpooled_ok |
| 391 | } |
| 392 | } else { |
| 393 | # sequential execution |
| 394 | catch {eval $command} output |
| 395 | _log_test_case $output $logdir $dir $group $grid $casename log |
| 396 | |
| 397 | # update summary log with requested period |
| 398 | if { $logdir != "" && $refresh > 0 && [expr [clock seconds] - $refresh_timer > $refresh] } { |
| 399 | # update and dump summary |
| 400 | _log_summarize $logdir $log |
| 401 | set refresh_timer [clock seconds] |
| 402 | } |
| 403 | } |
| 404 | } |
| 405 | |
| 406 | # get results of started threads |
| 407 | if { $parallel > 0 } { |
| 408 | _testgrid_process_jobs $worker |
| 409 | # release thread pool |
| 410 | if { $nbpooled > 0 } { |
| 411 | tpool::cancel $worker [array names job_def] |
| 412 | } |
| 413 | catch {tpool::resume $worker} |
| 414 | tpool::release $worker |
| 415 | } |
| 416 | |
| 417 | uplevel dchrono _timer stop |
| 418 | set time [lindex [split [uplevel dchrono _timer show] "\n"] 0] |
| 419 | |
| 420 | if { $userbreak } { |
| 421 | _log_and_puts log "*********** Stopped by user break ***********" |
| 422 | set time "${time} \nNote: the process is not finished, stopped by user break!" |
| 423 | } |
| 424 | |
| 425 | ###################################################### |
| 426 | # output summary logs and exit |
| 427 | ###################################################### |
| 428 | |
| 429 | _log_summarize $logdir $log $time |
| 430 | if { $logdir != "" } { |
| 431 | puts "Detailed logs are saved in $logdir" |
| 432 | } |
| 433 | if { $logdir != "" && $xmlfile != "" } { |
| 434 | # XML output file is assumed relative to log dir unless it is absolute |
| 435 | if { [ file pathtype $xmlfile] == "relative" } { |
| 436 | set xmlfile [file normalize $logdir/$xmlfile] |
| 437 | } |
| 438 | _log_xml_summary $logdir $xmlfile $log 0 |
| 439 | puts "XML summary is saved to $xmlfile" |
| 440 | } |
| 441 | |
| 442 | return |
| 443 | } |
| 444 | |
| 445 | # Procedure to regenerate summary log from logs of test cases |
| 446 | help testsummarize { |
| 447 | Regenerate summary log in the test directory from logs of test cases. |
| 448 | This can be necessary if test grids are executed separately (e.g. on |
| 449 | different stations) or some grids have been re-executed. |
| 450 | Use: testsummarize dir |
| 451 | } |
| 452 | proc testsummarize {dir} { |
| 453 | global _test_case_regexp |
| 454 | |
| 455 | if { ! [file isdirectory $dir] } { |
| 456 | error "Error: \"$dir\" is not a directory" |
| 457 | } |
| 458 | |
| 459 | # get summary statements from all test cases in one log |
| 460 | set log {} |
| 461 | |
| 462 | # to avoid huge listing of logs, first find all subdirectories and iterate |
| 463 | # by them, parsing log files in each subdirectory independently |
| 464 | foreach grid [glob -directory $dir -types d -tails */*] { |
| 465 | foreach caselog [glob -nocomplain -directory [file join $dir $grid] -types f -tails *.log] { |
| 466 | set file [file join $dir $grid $caselog] |
| 467 | set nbfound 0 |
| 468 | set fd [open $file r] |
| 469 | while { [gets $fd line] >= 0 } { |
| 470 | if { [regexp $_test_case_regexp $line res grp grd cas status message] } { |
| 471 | if { "[file join $grid $caselog]" != "[file join $grp $grd ${cas}.log]" } { |
| 472 | puts "Error: $file contains status line for another test case ($line)" |
| 473 | } |
| 474 | lappend log $line |
| 475 | incr nbfound |
| 476 | } |
| 477 | } |
| 478 | close $fd |
| 479 | |
| 480 | if { $nbfound != 1 } { |
| 481 | puts "Error: $file contains $nbfound status lines, expected 1" |
| 482 | } |
| 483 | } |
| 484 | } |
| 485 | |
| 486 | _log_summarize $dir $log "Summary regenerated from logs at [clock format [clock seconds]]" |
| 487 | return |
| 488 | } |
| 489 | |
| 490 | # Procedure to compare results of two runs of test cases |
| 491 | help testdiff { |
| 492 | Compare results of two executions of tests (CPU times, ...) |
| 493 | Use: testdiff dir1 dir2 [groupname [gridname]] [options...] |
| 494 | Where dir1 and dir2 are directories containing logs of two test runs. |
| 495 | Allowed options are: |
| 496 | -save filename: save resulting log in specified file (default name is |
| 497 | <dir1>/diff-<dir2>.log); HTML log is saved with same name |
| 498 | and extension .html |
| 499 | -status {same|ok|all}: filter cases for comparing by their status: |
| 500 | same - only cases with same status are compared (default) |
| 501 | ok - only cases with OK status in both logs are compared |
| 502 | all - results are compared regardless of status |
| 503 | -verbose level: |
| 504 | 1 - output only differences |
| 505 | 2 - output also list of logs and directories present in one of dirs only |
| 506 | 3 - (default) output also progress messages |
| 507 | } |
| 508 | proc testdiff {dir1 dir2 args} { |
| 509 | if { "$dir1" == "$dir2" } { |
| 510 | error "Input directories are the same" |
| 511 | } |
| 512 | |
| 513 | ###################################################### |
| 514 | # check arguments |
| 515 | ###################################################### |
| 516 | |
| 517 | # treat options |
| 518 | set logfile [file join $dir1 "diff-[file tail $dir2].log"] |
| 519 | set basename "" |
| 520 | set status "same" |
| 521 | set verbose 3 |
| 522 | for {set narg 0} {$narg < [llength $args]} {incr narg} { |
| 523 | set arg [lindex $args $narg] |
| 524 | |
| 525 | # log file name |
| 526 | if { $arg == "-save" } { |
| 527 | incr narg |
| 528 | if { $narg < [llength $args] && ! [regexp {^-} [lindex $args $narg]] } { |
| 529 | set logfile [lindex $args $narg] |
| 530 | } else { |
| 531 | error "Error: Option -save must be followed by log file name" |
| 532 | } |
| 533 | continue |
| 534 | } |
| 535 | |
| 536 | # status filter |
| 537 | if { $arg == "-status" } { |
| 538 | incr narg |
| 539 | if { $narg < [llength $args] && ! [regexp {^-} [lindex $args $narg]] } { |
| 540 | set status [lindex $args $narg] |
| 541 | } else { set status "" } |
| 542 | if { "$status" != "same" && "$status" != "all" && "$status" != "ok" } { |
| 543 | error "Error: Option -status must be followed by one of \"same\", \"all\", or \"ok\"" |
| 544 | } |
| 545 | continue |
| 546 | } |
| 547 | |
| 548 | # verbose level |
| 549 | if { $arg == "-verbose" } { |
| 550 | incr narg |
| 551 | if { $narg < [llength $args] && ! [regexp {^-} [lindex $args $narg]] } { |
| 552 | set verbose [expr [lindex $args $narg]] |
| 553 | } else { |
| 554 | error "Error: Option -verbose must be followed by integer verbose level" |
| 555 | } |
| 556 | continue |
| 557 | } |
| 558 | |
| 559 | if { [regexp {^-} $arg] } { |
| 560 | error "Error: unsupported option \"$arg\"" |
| 561 | } |
| 562 | |
| 563 | # non-option arguments form a subdirectory path |
| 564 | set basename [file join $basename $arg] |
| 565 | } |
| 566 | |
| 567 | # run diff procedure (recursive) |
| 568 | _test_diff $dir1 $dir2 $basename $status $verbose log |
| 569 | |
| 570 | # save result to log file |
| 571 | if { "$logfile" != "" } { |
| 572 | _log_save $logfile [join $log "\n"] |
| 573 | _log_html_diff "[file rootname $logfile].html" $log $dir1 $dir2 |
| 574 | puts "Log is saved to $logfile (and .html)" |
| 575 | } |
| 576 | |
| 577 | return |
| 578 | } |
| 579 | |
| 580 | # Procedure to check data file before adding it to repository |
| 581 | help testfile { |
| 582 | Check data file and prepare it for putting to test data files repository. |
| 583 | Use: testfile [filelist] |
| 584 | |
| 585 | Will report if: |
| 586 | - data file (non-binary) is in DOS encoding (CR/LF) |
| 587 | - same data file (with same or another name) already exists in the repository |
| 588 | - another file with the same name already exists |
| 589 | Note that names are assumed to be case-insensitive (for Windows). |
| 590 | |
| 591 | Unless the file is already in the repository, tries to load it, reports |
| 592 | the recognized file format, file size, number of faces and edges in the |
| 593 | loaded shape (if any), and makes snapshot (in the temporary directory). |
| 594 | Finally it advises whether the file should be put to public section of the |
| 595 | repository. |
| 596 | } |
| 597 | proc testfile {filelist} { |
| 598 | global env |
| 599 | |
| 600 | # check that CSF_TestDataPath is defined |
| 601 | if { ! [info exists env(CSF_TestDataPath)] } { |
| 602 | error "Environment variable CSF_TestDataPath must be defined!" |
| 603 | } |
| 604 | |
| 605 | # build registry of existing data files (name -> path) and (size -> path) |
| 606 | puts "Checking available test data files..." |
| 607 | foreach dir [_split_path $env(CSF_TestDataPath)] { |
| 608 | while {[llength $dir] != 0} { |
| 609 | set curr [lindex $dir 0] |
| 610 | set dir [lrange $dir 1 end] |
| 611 | eval lappend dir [glob -nocomplain -directory $curr -type d *] |
| 612 | foreach file [glob -nocomplain -directory $curr -type f *] { |
| 613 | set name [file tail $file] |
| 614 | set name_lower [string tolower $name] |
| 615 | |
| 616 | # check that the file is not in DOS encoding |
| 617 | if { [_check_dos_encoding $file] } { |
| 618 | puts "Warning: file $file is in DOS encoding; was this intended?" |
| 619 | } |
| 620 | _check_file_format $file |
| 621 | |
| 622 | # check if file with the same name is present twice or more |
| 623 | if { [info exists names($name_lower)] } { |
| 624 | puts "Error: more than one file with name $name is present in the repository:" |
| 625 | if { [_diff_files $file $names($name_lower)] } { |
| 626 | puts "(files are different by content)" |
| 627 | } else { |
| 628 | puts "(files are same by content)" |
| 629 | } |
| 630 | puts "--> $file" |
| 631 | puts "--> $names($name_lower)" |
| 632 | continue |
| 633 | } |
| 634 | |
| 635 | # check if file with the same content exists |
| 636 | set size [file size $file] |
| 637 | if { [info exists sizes($size)] } { |
| 638 | foreach other $sizes($size) { |
| 639 | if { ! [_diff_files $file $other] } { |
| 640 | puts "Warning: two files with the same content found:" |
| 641 | puts "--> $file" |
| 642 | puts "--> $other" |
| 643 | } |
| 644 | } |
| 645 | } |
| 646 | |
| 647 | # add the file to the registry |
| 648 | set names($name_lower) $file |
| 649 | lappend sizes($size) $file |
| 650 | } |
| 651 | } |
| 652 | } |
| 653 | if { [llength $filelist] <= 0 } { return } |
| 654 | |
| 655 | # check the new files |
| 656 | set has_images f |
| 657 | puts "Checking new file(s)..." |
| 658 | foreach file $filelist { |
| 659 | # check for DOS encoding |
| 660 | if { [_check_dos_encoding $file] } { |
| 661 | puts "$file: Warning: DOS encoding detected" |
| 662 | } |
| 663 | |
| 664 | set name [file tail $file] |
| 665 | set name_lower [string tolower $name] |
| 666 | |
| 667 | # check for presence of the file with same name |
| 668 | if { [info exists names($name_lower)] } { |
| 669 | if { [_diff_files $file $names($name_lower)] } { |
| 670 | puts "$file: Error: name is already used by existing file\n--> $names($name_lower)" |
| 671 | } else { |
| 672 | puts "$file: OK: already in the repository \n--> $names($name_lower)" |
| 673 | continue |
| 674 | } |
| 675 | } |
| 676 | |
| 677 | # check if file with the same content exists |
| 678 | set size [file size $file] |
| 679 | if { [info exists sizes($size)] } { |
| 680 | set found f |
| 681 | foreach other $sizes($size) { |
| 682 | if { ! [_diff_files $file $other] } { |
| 683 | puts "$file: OK: the same file is already present under name [file tail $other]\n--> $other" |
| 684 | set found t |
| 685 | break |
| 686 | } |
| 687 | } |
| 688 | if { $found } { continue } |
| 689 | } |
| 690 | |
| 691 | # try to read the file |
| 692 | set format [_check_file_format $file] |
| 693 | if { [catch {uplevel load_data_file $file $format a}] } { |
| 694 | puts "$file: Error: Cannot read as $format file" |
| 695 | continue |
| 696 | } |
| 697 | |
| 698 | # get number of faces and edges |
| 699 | set edges 0 |
| 700 | set faces 0 |
| 701 | set nbs [uplevel nbshapes a] |
| 702 | regexp {EDGE[ \t:]*([0-9]+)} $nbs res edges |
| 703 | regexp {FACE[ \t:]*([0-9]+)} $nbs res faces |
| 704 | |
| 705 | # classify; first check file size and number of faces and edges |
| 706 | if { $size < 95000 && $faces < 20 && $edges < 100 } { |
| 707 | set dir public |
| 708 | } else { |
| 709 | set dir private |
| 710 | # check if one of names of that file corresponds to typical name for |
| 711 | # MDTV bugs or has extension .rle, this should be old model |
| 712 | if { [regexp -nocase {.*(cts|ats|pro|buc|ger|fra|usa|uki)[0-9]+.*} $name] || |
| 713 | [regexp -nocase {[.]rle\y} $name] } { |
| 714 | set dir old |
| 715 | } |
| 716 | } |
| 717 | |
| 718 | # add stats |
| 719 | puts "$file: $format size=[expr $size / 1024] KiB, nbfaces=$faces, nbedges=$edges -> $dir" |
| 720 | |
| 721 | set tmpdir [_get_temp_dir] |
| 722 | file mkdir $tmpdir/$dir |
| 723 | |
| 724 | # make snapshot |
| 725 | pload AISV |
| 726 | uplevel vdisplay a |
| 727 | uplevel vfit |
| 728 | uplevel vzfit |
| 729 | uplevel vdump $tmpdir/$dir/[file rootname [file tail $file]].png |
| 730 | set has_images t |
| 731 | } |
| 732 | if { $has_images } { |
| 733 | puts "Snapshots are saved in subdirectory [_get_temp_dir]" |
| 734 | } |
| 735 | } |
| 736 | |
| 737 | # Procedure to locate data file for test given its name. |
| 738 | # The search is performed assuming that the function is called |
| 739 | # from the test case script; the search order is: |
| 740 | # - subdirectory "data" of the test script (grid) folder |
| 741 | # - subdirectories in environment variable CSF_TestDataPath |
| 742 | # - subdirectory set by datadir command |
| 743 | # If file is not found, raises Tcl error. |
| 744 | proc locate_data_file {filename} { |
| 745 | global env groupname gridname casename |
| 746 | |
| 747 | # check if the file is located in the subdirectory data of the script dir |
| 748 | set scriptfile [info script] |
| 749 | if { $scriptfile != "" } { |
| 750 | set path [file join [file dirname $scriptfile] data $filename] |
| 751 | if { [file exists $path] } { |
| 752 | return [file normalize $path] |
| 753 | } |
| 754 | } |
| 755 | |
| 756 | # check sub-directories in paths indicated by CSF_TestDataPath |
| 757 | if { [info exists env(CSF_TestDataPath)] } { |
| 758 | foreach dir [_split_path $env(CSF_TestDataPath)] { |
| 759 | while {[llength $dir] != 0} { |
| 760 | set name [lindex $dir 0] |
| 761 | set dir [lrange $dir 1 end] |
| 762 | # skip directories starting with dot |
| 763 | if { [regexp {^[.]} $name] } { continue } |
| 764 | if { [file exists $name/$filename] } { |
| 765 | return [file normalize $name/$filename] |
| 766 | } |
| 767 | eval lappend dir [glob -nocomplain -directory $name -type d *] |
| 768 | } |
| 769 | } |
| 770 | } |
| 771 | |
| 772 | # check current datadir |
| 773 | if { [file exists [uplevel datadir]/$filename] } { |
| 774 | return [file normalize [uplevel datadir]/$filename] |
| 775 | } |
| 776 | |
| 777 | # raise error |
| 778 | error [join [list "File $filename could not be found" \ |
| 779 | "(should be in paths indicated by CSF_TestDataPath environment variable, " \ |
| 780 | "or in subfolder data in the script directory)"] "\n"] |
| 781 | } |
| 782 | |
| 783 | # Internal procedure to find test case indicated by group, grid, and test case names; |
| 784 | # returns: |
| 785 | # - dir: path to the base directory of the tests group |
| 786 | # - gridname: actual name of the grid |
| 787 | # - casefile: path to the test case script |
| 788 | # if no such test is found, raises error with appropriate message |
| 789 | proc _get_test {group grid casename _dir _gridname _casefile} { |
| 790 | upvar $_dir dir |
| 791 | upvar $_gridname gridname |
| 792 | upvar $_casefile casefile |
| 793 | |
| 794 | global env |
| 795 | |
| 796 | # check that environment variable defining paths to test scripts is defined |
| 797 | if { ! [info exists env(CSF_TestScriptsPath)] || |
| 798 | [llength $env(CSF_TestScriptsPath)] <= 0 } { |
| 799 | error "Error: Environment variable CSF_TestScriptsPath is not defined" |
| 800 | } |
| 801 | |
| 802 | # iterate by all script paths |
| 803 | foreach dir [_split_path $env(CSF_TestScriptsPath)] { |
| 804 | # protection against empty paths |
| 805 | set dir [string trim $dir] |
| 806 | if { $dir == "" } { continue } |
| 807 | |
| 808 | # check that directory exists |
| 809 | if { ! [file isdirectory $dir] } { |
| 810 | puts "Warning: directory $dir listed in CSF_TestScriptsPath does not exist, skipped" |
| 811 | continue |
| 812 | } |
| 813 | |
| 814 | # check if test group with given name exists in this dir |
| 815 | # if not, continue to the next test dir |
| 816 | if { ! [file isdirectory $dir/$group] } { continue } |
| 817 | |
| 818 | # check that grid with given name (possibly alias) exists; stop otherwise |
| 819 | set gridname $grid |
| 820 | if { ! [file isdirectory $dir/$group/$gridname] } { |
| 821 | # check if grid is named by alias rather than by actual name |
| 822 | if { [file exists $dir/$group/grids.list] } { |
| 823 | set fd [open $dir/$group/grids.list] |
| 824 | while { [gets $fd line] >= 0 } { |
| 825 | if { [regexp "\[ \t\]*\#.*" $line] } { continue } |
| 826 | if { [regexp "^$grid\[ \t\]*\(\[A-Za-z0-9_.-\]+\)\$" $line res gridname] } { |
| 827 | break |
| 828 | } |
| 829 | } |
| 830 | close $fd |
| 831 | } |
| 832 | } |
| 833 | if { ! [file isdirectory $dir/$group/$gridname] } { continue } |
| 834 | |
| 835 | # get actual file name of the script; stop if it cannot be found |
| 836 | set casefile $dir/$group/$gridname/$casename |
| 837 | if { ! [file exists $casefile] } { |
| 838 | # check if this grid is aliased to another one |
| 839 | if { [file exists $dir/$group/$gridname/cases.list] } { |
| 840 | set fd [open $dir/$group/$gridname/cases.list] |
| 841 | if { [gets $fd line] >= 0 } { |
| 842 | set casefile [file normalize $dir/$group/$gridname/[string trim $line]/$casename] |
| 843 | } |
| 844 | close $fd |
| 845 | } |
| 846 | } |
| 847 | if { [file exists $casefile] } { |
| 848 | # normal return |
| 849 | return |
| 850 | } |
| 851 | } |
| 852 | |
| 853 | # coming here means specified test is not found; report error |
| 854 | error [join [list "Error: test case $group / $grid / $casename is not found in paths listed in variable" \ |
| 855 | "CSF_TestScriptsPath (current value is \"$env(CSF_TestScriptsPath)\")"] "\n"] |
| 856 | } |
| 857 | |
| 858 | # Internal procedure to run test case indicated by base directory, |
| 859 | # grid and grid names, and test case file path. |
| 860 | # The log can be obtained by command "dlog get". |
| 861 | proc _run_test {scriptsdir group gridname casefile echo} { |
| 862 | global env |
| 863 | |
| 864 | # start timer |
| 865 | uplevel dchrono _timer reset |
| 866 | uplevel dchrono _timer start |
| 867 | catch {uplevel meminfo w} membase |
| 868 | |
| 869 | # enable commands logging; switch to old-style mode if dlog command is not present |
| 870 | set dlog_exists 1 |
| 871 | if { [catch {dlog reset}] } { |
| 872 | set dlog_exists 0 |
| 873 | } elseif { $echo } { |
| 874 | decho on |
| 875 | } else { |
| 876 | dlog reset |
| 877 | dlog on |
| 878 | rename puts puts-saved |
| 879 | proc puts args { |
| 880 | global _tests_verbose |
| 881 | |
| 882 | # log only output to stdout and stderr, not to file! |
| 883 | if {[llength $args] > 1} { |
| 884 | set optarg [lindex $args end-1] |
| 885 | if { $optarg == "stdout" || $optarg == "stderr" || $optarg == "-newline" } { |
| 886 | dlog add [lindex $args end] |
| 887 | } else { |
| 888 | eval puts-saved $args |
| 889 | } |
| 890 | } else { |
| 891 | dlog add [lindex $args end] |
| 892 | } |
| 893 | } |
| 894 | } |
| 895 | |
| 896 | # evaluate test case |
| 897 | if [catch { |
| 898 | # set variables identifying test case |
| 899 | uplevel set casename [file tail $casefile] |
| 900 | uplevel set groupname $group |
| 901 | uplevel set gridname $gridname |
| 902 | uplevel set dirname $scriptsdir |
| 903 | |
| 904 | # set variables for saving of images if not yet set |
| 905 | if { ! [uplevel info exists imagedir] } { |
| 906 | uplevel set imagedir [_get_temp_dir] |
| 907 | uplevel set test_image \$casename |
| 908 | } |
| 909 | |
| 910 | # execute test scripts |
| 911 | if { [file exists $scriptsdir/$group/begin] } { |
| 912 | puts "Executing $scriptsdir/$group/begin..."; flush stdout |
| 913 | uplevel source $scriptsdir/$group/begin |
| 914 | } |
| 915 | if { [file exists $scriptsdir/$group/$gridname/begin] } { |
| 916 | puts "Executing $scriptsdir/$group/$gridname/begin..."; flush stdout |
| 917 | uplevel source $scriptsdir/$group/$gridname/begin |
| 918 | } |
| 919 | |
| 920 | puts "Executing $casefile..."; flush stdout |
| 921 | uplevel source $casefile |
| 922 | |
| 923 | if { [file exists $scriptsdir/$group/$gridname/end] } { |
| 924 | puts "Executing $scriptsdir/$group/$gridname/end..."; flush stdout |
| 925 | uplevel source $scriptsdir/$group/$gridname/end |
| 926 | } |
| 927 | if { [file exists $scriptsdir/$group/end] } { |
| 928 | puts "Executing $scriptsdir/$group/end..."; flush stdout |
| 929 | uplevel source $scriptsdir/$group/end |
| 930 | } |
| 931 | } res] { |
| 932 | puts "Tcl Exception: $res" |
| 933 | } |
| 934 | |
| 935 | # stop logging |
| 936 | if { $dlog_exists } { |
| 937 | if { $echo } { |
| 938 | decho off |
| 939 | } else { |
| 940 | rename puts {} |
| 941 | rename puts-saved puts |
| 942 | dlog off |
| 943 | } |
| 944 | } |
| 945 | |
| 946 | # stop cpulimit killer if armed by the test |
| 947 | cpulimit |
| 948 | |
| 949 | # add memory and timing info |
| 950 | set stats "" |
| 951 | if { ! [catch {uplevel meminfo w} memuse] } { |
| 952 | set stats "MEMORY DELTA: [expr ($memuse - $membase) / 1024] KiB\n" |
| 953 | } |
| 954 | uplevel dchrono _timer stop |
| 955 | set time [uplevel dchrono _timer show] |
| 956 | if [regexp -nocase {CPU user time:[ \t]*([0-9.e-]+)} $time res cpu] { |
| 957 | set stats "${stats}TOTAL CPU TIME: $cpu sec\n" |
| 958 | } |
| 959 | if { $dlog_exists && ! $echo } { |
| 960 | dlog add $stats |
| 961 | } else { |
| 962 | puts $stats |
| 963 | } |
| 964 | } |
| 965 | |
| 966 | # Internal procedure to check log of test execution and decide if it passed or failed |
| 967 | proc _check_log {dir group gridname casename log {_summary {}} {_html_log {}}} { |
| 968 | global env |
| 969 | if { $_summary != "" } { upvar $_summary summary } |
| 970 | if { $_html_log != "" } { upvar $_html_log html_log } |
| 971 | set summary {} |
| 972 | set html_log {} |
| 973 | |
| 974 | if [catch { |
| 975 | |
| 976 | # load definition of 'bad words' indicating test failure |
| 977 | # note that rules are loaded in the order of decreasing priority (grid - group - common), |
| 978 | # thus grid rules will override group ones |
| 979 | set badwords {} |
| 980 | foreach rulesfile [list $dir/$group/$gridname/parse.rules $dir/$group/parse.rules $dir/parse.rules] { |
| 981 | if [catch {set fd [open $rulesfile r]}] { continue } |
| 982 | while { [gets $fd line] >= 0 } { |
| 983 | # skip comments and empty lines |
| 984 | if { [regexp "\[ \t\]*\#.*" $line] } { continue } |
| 985 | if { [string trim $line] == "" } { continue } |
| 986 | # extract regexp |
| 987 | if { ! [regexp {^([^/]*)/([^/]*)/(.*)$} $line res status rexp comment] } { |
| 988 | puts "Warning: cannot recognize parsing rule \"$line\" in file $rulesfile" |
| 989 | continue |
| 990 | } |
| 991 | set status [string trim $status] |
| 992 | if { $comment != "" } { set status "$status ([string trim $comment])" } |
| 993 | set rexp [regsub -all {\\b} $rexp {\\y}] ;# convert regexp from Perl to Tcl style |
| 994 | lappend badwords [list $status $rexp] |
| 995 | } |
| 996 | close $fd |
| 997 | } |
| 998 | if { [llength $badwords] <= 0 } { |
| 999 | puts "Warning: no definition of error indicators found (check files parse.rules)" |
| 1000 | } |
| 1001 | |
| 1002 | # analyse log line-by-line |
| 1003 | set todos {} |
| 1004 | set status "" |
| 1005 | foreach line [split $log "\n"] { |
| 1006 | # check if line defines specific treatment of some messages |
| 1007 | if [regexp -nocase {^[ \t]*TODO ([^:]*):(.*)$} $line res platforms pattern] { |
| 1008 | if { ! [regexp -nocase {\mAll\M} $platforms] && |
| 1009 | ! [regexp -nocase "\\m$env(os_type)\\M" $platforms] } { |
| 1010 | lappend html_log $line |
| 1011 | continue ;# TODO statement is for another platform |
| 1012 | } |
| 1013 | |
| 1014 | # record TODOs that mark unstable cases |
| 1015 | if { [regexp {[\?]} $platforms] } { |
| 1016 | set todos_unstable([llength $todos]) 1 |
| 1017 | } |
| 1018 | |
| 1019 | lappend todos [regsub -all {\\b} [string trim $pattern] {\\y}] ;# convert regexp from Perl to Tcl style |
| 1020 | lappend html_log [_html_highlight BAD $line] |
| 1021 | continue |
| 1022 | } |
| 1023 | |
| 1024 | # check for presence of messages indicating test result |
| 1025 | set ismarked 0 |
| 1026 | foreach bw $badwords { |
| 1027 | if { [regexp [lindex $bw 1] $line] } { |
| 1028 | # check if this is known bad case |
| 1029 | set is_known 0 |
| 1030 | for {set i 0} {$i < [llength $todos]} {incr i} { |
| 1031 | if { [regexp [lindex $todos $i] $line] } { |
| 1032 | set is_known 1 |
| 1033 | incr todo_count($i) |
| 1034 | lappend html_log [_html_highlight BAD $line] |
| 1035 | break |
| 1036 | } |
| 1037 | } |
| 1038 | |
| 1039 | # if it is not in todo, define status |
| 1040 | if { ! $is_known } { |
| 1041 | set stat [lindex $bw 0 0] |
| 1042 | lappend html_log [_html_highlight $stat $line] |
| 1043 | if { $status == "" && $stat != "OK" && ! [regexp -nocase {^IGNOR} $stat] } { |
| 1044 | set status [lindex $bw 0] |
| 1045 | } |
| 1046 | } |
| 1047 | set ismarked 1 |
| 1048 | break |
| 1049 | } |
| 1050 | } |
| 1051 | if { ! $ismarked } { |
| 1052 | lappend html_log $line |
| 1053 | } |
| 1054 | } |
| 1055 | |
| 1056 | # check for presence of TEST COMPLETED statement |
| 1057 | if { $status == "" && ! [regexp {TEST COMPLETED} $log] } { |
| 1058 | # check whether absence of TEST COMPLETED is known problem |
| 1059 | set i [lsearch $todos "TEST INCOMPLETE"] |
| 1060 | if { $i >= 0 } { |
| 1061 | incr todo_count($i) |
| 1062 | } else { |
| 1063 | set status "FAILED (no final message is found)" |
| 1064 | } |
| 1065 | } |
| 1066 | |
| 1067 | # check declared bad cases and diagnose possible improvement |
| 1068 | # (bad case declared but not detected). |
| 1069 | # Note that absence of the problem marked by TODO with question mark |
| 1070 | # (unstable) is not reported as improvement. |
| 1071 | if { $status == "" } { |
| 1072 | for {set i 0} {$i < [llength $todos]} {incr i} { |
| 1073 | if { ! [info exists todos_unstable($i)] && |
| 1074 | (! [info exists todo_count($i)] || $todo_count($i) <= 0) } { |
| 1075 | set status "IMPROVEMENT (expected problem TODO no. [expr $i + 1] is not detected)" |
| 1076 | break; |
| 1077 | } |
| 1078 | } |
| 1079 | } |
| 1080 | |
| 1081 | # report test as known bad if at least one of expected problems is found |
| 1082 | if { $status == "" && [llength [array names todo_count]] > 0 } { |
| 1083 | set status "BAD (known problem)" |
| 1084 | } |
| 1085 | |
| 1086 | # report normal OK |
| 1087 | if { $status == "" } {set status "OK" } |
| 1088 | |
| 1089 | } res] { |
| 1090 | set status "FAILED ($res)" |
| 1091 | } |
| 1092 | |
| 1093 | # put final message |
| 1094 | _log_and_puts summary "CASE $group $gridname $casename: $status" |
| 1095 | set summary [join $summary "\n"] |
| 1096 | set html_log "[_html_highlight [lindex $status 0] $summary]\n[join $html_log \n]" |
| 1097 | } |
| 1098 | |
| 1099 | # Auxiliary procedure putting message to both cout and log variable (list) |
| 1100 | proc _log_and_puts {logvar message} { |
| 1101 | if { $logvar != "" } { |
| 1102 | upvar $logvar log |
| 1103 | lappend log $message |
| 1104 | } |
| 1105 | puts $message |
| 1106 | } |
| 1107 | |
| 1108 | # Auxiliary procedure to log result on single test case |
| 1109 | proc _log_test_case {output logdir dir group grid casename logvar} { |
| 1110 | upvar $logvar log |
| 1111 | |
| 1112 | # check result and make HTML log |
| 1113 | _check_log $dir $group $grid $casename $output summary html_log |
| 1114 | lappend log $summary |
| 1115 | |
| 1116 | # save log to file |
| 1117 | if { $logdir != "" } { |
| 1118 | _log_html $logdir/$group/$grid/$casename.html $html_log "Test $group $grid $casename" |
| 1119 | _log_save $logdir/$group/$grid/$casename.log "$output\n$summary" "Test $group $grid $casename" |
| 1120 | } |
| 1121 | } |
| 1122 | |
| 1123 | # Auxiliary procedure to save log to file |
| 1124 | proc _log_save {file log {title {}}} { |
| 1125 | # create missing directories as needed |
| 1126 | catch {file mkdir [file dirname $file]} |
| 1127 | |
| 1128 | # try to open a file |
| 1129 | if [catch {set fd [open $file w]} res] { |
| 1130 | error "Error saving log file $file: $res" |
| 1131 | } |
| 1132 | |
| 1133 | # dump log and close |
| 1134 | puts $fd "$title\n" |
| 1135 | puts $fd $log |
| 1136 | close $fd |
| 1137 | return |
| 1138 | } |
| 1139 | |
| 1140 | # Auxiliary procedure to make a (relative if possible) URL to a file for |
| 1141 | # inclusion a reference in HTML log |
| 1142 | proc _make_url {htmldir file} { |
| 1143 | set htmlpath [file split [file normalize $htmldir]] |
| 1144 | set filepath [file split [file normalize $file]] |
| 1145 | for {set i 0} {$i < [llength $htmlpath]} {incr i} { |
| 1146 | if { "[lindex $htmlpath $i]" != "[lindex $filepath $i]" } { |
| 1147 | if { $i == 0 } { break } |
| 1148 | return "[string repeat "../" [expr [llength $htmlpath] - $i - 1]][eval file join [lrange $filepath $i end]]" |
| 1149 | } |
| 1150 | } |
| 1151 | |
| 1152 | # if relative path could not be made, return full file URL |
| 1153 | return "file://[file normalize $file]" |
| 1154 | } |
| 1155 | |
| 1156 | # Auxiliary procedure to save log to file |
| 1157 | proc _log_html {file log {title {}}} { |
| 1158 | # create missing directories as needed |
| 1159 | catch {file mkdir [file dirname $file]} |
| 1160 | |
| 1161 | # try to open a file |
| 1162 | if [catch {set fd [open $file w]} res] { |
| 1163 | error "Error saving log file $file: $res" |
| 1164 | } |
| 1165 | |
| 1166 | # print header |
| 1167 | puts $fd "<html><head><title>$title</title></head><body><h1>$title</h1>" |
| 1168 | |
| 1169 | # add images if present |
| 1170 | set imgbasename [file rootname [file tail $file]] |
| 1171 | foreach img [lsort [glob -nocomplain -directory [file dirname $file] -tails ${imgbasename}*.gif ${imgbasename}*.png ${imgbasename}*.jpg]] { |
| 1172 | puts $fd "<p>[file tail $img]<br><img src=\"$img\"/><p>" |
| 1173 | } |
| 1174 | |
| 1175 | # print log body, trying to add HTML links to script files on lines like |
| 1176 | # "Executing <filename>..." |
| 1177 | puts $fd "<pre>" |
| 1178 | foreach line [split $log "\n"] { |
| 1179 | if { [regexp {Executing[ \t]+([a-zA-Z0-9._/:-]+[^.])} $line res script] && |
| 1180 | [file exists $script] } { |
| 1181 | set line [regsub $script $line "<a href=\"[_make_url $file $script]\">$script</a>"] |
| 1182 | } |
| 1183 | puts $fd $line |
| 1184 | } |
| 1185 | puts $fd "</pre></body></html>" |
| 1186 | |
| 1187 | close $fd |
| 1188 | return |
| 1189 | } |
| 1190 | |
| 1191 | # Auxiliary method to make text with HTML highlighting according to status |
| 1192 | proc _html_color {status} { |
| 1193 | # choose a color for the cell according to result |
| 1194 | if { $status == "OK" } { |
| 1195 | return lightgreen |
| 1196 | } elseif { [regexp -nocase {^FAIL} $status] } { |
| 1197 | return red |
| 1198 | } elseif { [regexp -nocase {^BAD} $status] } { |
| 1199 | return yellow |
| 1200 | } elseif { [regexp -nocase {^IMP} $status] } { |
| 1201 | return orange |
| 1202 | } elseif { [regexp -nocase {^SKIP} $status] } { |
| 1203 | return gray |
| 1204 | } elseif { [regexp -nocase {^IGNOR} $status] } { |
| 1205 | return gray |
| 1206 | } else { |
| 1207 | puts "Warning: no color defined for status $status, using red as if FAILED" |
| 1208 | return red |
| 1209 | } |
| 1210 | } |
| 1211 | |
| 1212 | # Format text line in HTML to be colored according to the status |
| 1213 | proc _html_highlight {status line} { |
| 1214 | return "<table><tr><td bgcolor=\"[_html_color $status]\">$line</td></tr></table>" |
| 1215 | } |
| 1216 | |
| 1217 | # Internal procedure to generate HTML page presenting log of the tests |
| 1218 | # execution in tabular form, with links to reports on individual cases |
| 1219 | proc _log_html_summary {logdir log totals regressions improvements total_time} { |
| 1220 | global _test_case_regexp |
| 1221 | |
| 1222 | # create missing directories as needed |
| 1223 | file mkdir $logdir |
| 1224 | |
| 1225 | # try to open a file and start HTML |
| 1226 | if [catch {set fd [open $logdir/summary.html w]} res] { |
| 1227 | error "Error creating log file: $res" |
| 1228 | } |
| 1229 | |
| 1230 | # write HRML header, including command to refresh log if still in progress |
| 1231 | puts $fd "<html><head>" |
| 1232 | puts $fd "<title>Tests summary</title>" |
| 1233 | if { $total_time == "" } { |
| 1234 | puts $fd "<meta http-equiv=\"refresh\" content=\"10\">" |
| 1235 | } |
| 1236 | puts $fd "<meta http-equiv=\"pragma\" content=\"NO-CACHE\">" |
| 1237 | puts $fd "</head><body>" |
| 1238 | |
| 1239 | # put summary |
| 1240 | set legend(OK) "Test passed OK" |
| 1241 | set legend(FAILED) "Test failed (regression)" |
| 1242 | set legend(BAD) "Known problem" |
| 1243 | set legend(IMPROVEMENT) "Possible improvement (expected problem not detected)" |
| 1244 | set legend(SKIPPED) "Test skipped due to lack of data file" |
| 1245 | puts $fd "<h1>Summary</h1><table>" |
| 1246 | foreach nbstat $totals { |
| 1247 | set status [lindex $nbstat 1] |
| 1248 | if { [info exists legend($status)] } { |
| 1249 | set comment $legend($status) |
| 1250 | } else { |
| 1251 | set comment "User-defined status" |
| 1252 | } |
| 1253 | puts $fd "<tr><td align=\"right\">[lindex $nbstat 0]</td><td bgcolor=\"[_html_color $status]\">$status</td><td>$comment</td></tr>" |
| 1254 | } |
| 1255 | puts $fd "</table>" |
| 1256 | |
| 1257 | # time stamp and elapsed time info |
| 1258 | if { $total_time != "" } { |
| 1259 | puts $fd "<p>Generated on [clock format [clock seconds] -format {%Y-%m-%d %H:%M:%S}] on [info hostname]\n<p>" |
| 1260 | puts $fd [join [split $total_time "\n"] "<p>"] |
| 1261 | } else { |
| 1262 | puts $fd "<p>NOTE: This is intermediate summary; the tests are still running! This page will refresh automatically until tests are finished." |
| 1263 | } |
| 1264 | |
| 1265 | # print regressions and improvements |
| 1266 | foreach featured [list $regressions $improvements] { |
| 1267 | if { [llength $featured] <= 1 } { continue } |
| 1268 | set status [string trim [lindex $featured 0] { :}] |
| 1269 | puts $fd "<h2>$status</h2>" |
| 1270 | puts $fd "<table>" |
| 1271 | set groupgrid "" |
| 1272 | foreach test [lrange $featured 1 end] { |
| 1273 | if { ! [regexp {^(.*)\s+([\w.]+)$} $test res gg name] } { |
| 1274 | set gg UNKNOWN |
| 1275 | set name "Error building short list; check details" |
| 1276 | } |
| 1277 | if { $gg != $groupgrid } { |
| 1278 | if { $groupgrid != "" } { puts $fd "</tr>" } |
| 1279 | set groupgrid $gg |
| 1280 | puts $fd "<tr><td>$gg</td>" |
| 1281 | } |
| 1282 | puts $fd "<td bgcolor=\"[_html_color $status]\"><a href=\"[regsub -all { } $gg /]/${name}.html\">$name</a></td>" |
| 1283 | } |
| 1284 | if { $groupgrid != "" } { puts $fd "</tr>" } |
| 1285 | puts $fd "</table>" |
| 1286 | } |
| 1287 | |
| 1288 | # put detailed log with TOC |
| 1289 | puts $fd "<hr><h1>Details</h1>" |
| 1290 | puts $fd "<div style=\"float:right; padding: 10px; border-style: solid; border-color: blue; border-width: 2px;\">" |
| 1291 | |
| 1292 | # process log line-by-line |
| 1293 | set group {} |
| 1294 | set letter {} |
| 1295 | set body {} |
| 1296 | foreach line [lsort -dictionary $log] { |
| 1297 | # check that the line is case report in the form "CASE group grid name: result (explanation)" |
| 1298 | if { ! [regexp $_test_case_regexp $line res grp grd casename result message] } { |
| 1299 | continue |
| 1300 | } |
| 1301 | |
| 1302 | # start new group |
| 1303 | if { $grp != $group } { |
| 1304 | if { $letter != "" } { lappend body "</tr></table>" } |
| 1305 | set letter {} |
| 1306 | set group $grp |
| 1307 | set grid {} |
| 1308 | puts $fd "<a href=\"#$group\">$group</a><br>" |
| 1309 | lappend body "<h2><a name=\"$group\">Group $group</a></h2>" |
| 1310 | } |
| 1311 | |
| 1312 | # start new grid |
| 1313 | if { $grd != $grid } { |
| 1314 | if { $letter != "" } { lappend body "</tr></table>" } |
| 1315 | set letter {} |
| 1316 | set grid $grd |
| 1317 | puts $fd " <a href=\"#$group-$grid\">$grid</a><br>" |
| 1318 | lappend body "<h2><a name=\"$group-$grid\">Grid $group $grid</a></h2>" |
| 1319 | } |
| 1320 | |
| 1321 | # check if test case name is <letter><digit>; |
| 1322 | # if not, set alnum to period "." to recognize non-standard test name |
| 1323 | if { ! [regexp {\A([A-Za-z]{1,2})([0-9]{1,2})\Z} $casename res alnum number] && |
| 1324 | ! [regexp {\A([A-Za-z0-9]+)_([0-9]+)\Z} $casename res alnum number] } { |
| 1325 | set alnum $casename |
| 1326 | } |
| 1327 | |
| 1328 | # start new row when letter changes or for non-standard names |
| 1329 | if { $alnum != $letter || $alnum == "." } { |
| 1330 | if { $letter != "" } { |
| 1331 | lappend body "</tr><tr>" |
| 1332 | } else { |
| 1333 | lappend body "<table><tr>" |
| 1334 | } |
| 1335 | set letter $alnum |
| 1336 | } |
| 1337 | |
| 1338 | lappend body "<td bgcolor=\"[_html_color $result]\"><a href=\"$group/$grid/${casename}.html\">$casename</a></td>" |
| 1339 | } |
| 1340 | puts $fd "</div>\n[join $body "\n"]</tr></table>" |
| 1341 | |
| 1342 | # add remaining lines of log as plain text |
| 1343 | puts $fd "<h2>Plain text messages</h2>\n<pre>" |
| 1344 | foreach line $log { |
| 1345 | if { ! [regexp $_test_case_regexp $line] } { |
| 1346 | puts $fd "$line" |
| 1347 | } |
| 1348 | } |
| 1349 | puts $fd "</pre>" |
| 1350 | |
| 1351 | # close file and exit |
| 1352 | puts $fd "</body>" |
| 1353 | close $fd |
| 1354 | return |
| 1355 | } |
| 1356 | |
| 1357 | # Procedure to dump summary logs of tests |
| 1358 | proc _log_summarize {logdir log {total_time {}}} { |
| 1359 | |
| 1360 | # sort log records alphabetically to have the same behavior on Linux and Windows |
| 1361 | # (also needed if tests are run in parallel) |
| 1362 | set loglist [lsort -dictionary $log] |
| 1363 | |
| 1364 | # classify test cases by status |
| 1365 | foreach line $loglist { |
| 1366 | if { [regexp {^CASE ([^:]*): ([[:alnum:]]+).*$} $line res caseid status] } { |
| 1367 | lappend stat($status) $caseid |
| 1368 | } |
| 1369 | } |
| 1370 | set totals {} |
| 1371 | set improvements {Improvements:} |
| 1372 | set regressions {Failed:} |
| 1373 | if { [info exists stat] } { |
| 1374 | foreach status [lsort [array names stat]] { |
| 1375 | lappend totals [list [llength $stat($status)] $status] |
| 1376 | |
| 1377 | # separately count improvements (status starting with IMP) and regressions (all except IMP, OK, BAD, and SKIP) |
| 1378 | if { [regexp -nocase {^IMP} $status] } { |
| 1379 | eval lappend improvements $stat($status) |
| 1380 | } elseif { $status != "OK" && ! [regexp -nocase {^BAD} $status] && ! [regexp -nocase {^SKIP} $status] } { |
| 1381 | eval lappend regressions $stat($status) |
| 1382 | } |
| 1383 | } |
| 1384 | } |
| 1385 | |
| 1386 | # if time is specified, add totals |
| 1387 | if { $total_time != "" } { |
| 1388 | if { [llength $improvements] > 1 } { |
| 1389 | _log_and_puts log [join $improvements "\n "] |
| 1390 | } |
| 1391 | if { [llength $regressions] > 1 } { |
| 1392 | _log_and_puts log [join $regressions "\n "] |
| 1393 | } |
| 1394 | if { [llength $improvements] == 1 && [llength $regressions] == 1 } { |
| 1395 | _log_and_puts log "No regressions" |
| 1396 | } |
| 1397 | _log_and_puts log "Total cases: [join $totals {, }]" |
| 1398 | _log_and_puts log $total_time |
| 1399 | } |
| 1400 | |
| 1401 | # save log to files |
| 1402 | if { $logdir != "" } { |
| 1403 | _log_html_summary $logdir $log $totals $regressions $improvements $total_time |
| 1404 | _log_save $logdir/tests.log [join $log "\n"] "Tests summary" |
| 1405 | } |
| 1406 | |
| 1407 | return |
| 1408 | } |
| 1409 | |
| 1410 | # Internal procedure to generate XML log in JUnit style, for further |
| 1411 | # consumption by Jenkins or similar systems. |
| 1412 | # |
| 1413 | # The output is intended to conform to XML schema supported by Jenkins found at |
| 1414 | # https://svn.jenkins-ci.org/trunk/hudson/dtkit/dtkit-format/dtkit-junit-model/src/main/resources/com/thalesgroup/dtkit/junit/model/xsd/junit-4.xsd |
| 1415 | # |
| 1416 | # The mapping of the fields is inspired by annotated schema of Apache Ant JUnit XML format found at |
| 1417 | # http://windyroad.org/dl/Open%20Source/JUnit.xsd |
| 1418 | proc _log_xml_summary {logdir filename log include_cout} { |
| 1419 | global _test_case_regexp |
| 1420 | |
| 1421 | catch {file mkdir [file dirname $filename]} |
| 1422 | |
| 1423 | # try to open a file and start XML |
| 1424 | if [catch {set fd [open $filename w]} res] { |
| 1425 | error "Error creating XML summary file $filename: $res" |
| 1426 | } |
| 1427 | puts $fd "<?xml version='1.0' encoding='utf-8'?>" |
| 1428 | puts $fd "<testsuites>" |
| 1429 | |
| 1430 | # prototype for command to generate test suite tag |
| 1431 | set time_and_host "timestamp=\"[clock format [clock seconds] -format {%Y-%m-%dT%H:%M:%S}]\" hostname=\"[info hostname]\"" |
| 1432 | set cmd_testsuite {puts $fd "<testsuite name=\"$group $grid\" tests=\"$nbtests\" failures=\"$nbfail\" errors=\"$nberr\" time=\"$time\" skipped=\"$nbskip\" $time_and_host>\n$testcases\n</testsuite>\n"} |
| 1433 | |
| 1434 | # sort log and process it line-by-line |
| 1435 | set group {} |
| 1436 | foreach line [lsort -dictionary $log] { |
| 1437 | # check that the line is case report in the form "CASE group grid name: result (explanation)" |
| 1438 | if { ! [regexp $_test_case_regexp $line res grp grd casename result message] } { |
| 1439 | continue |
| 1440 | } |
| 1441 | set message [string trim $message " \t\r\n()"] |
| 1442 | |
| 1443 | # start new testsuite for each grid |
| 1444 | if { $grp != $group || $grd != $grid } { |
| 1445 | |
| 1446 | # write previous test suite |
| 1447 | if [info exists testcases] { eval $cmd_testsuite } |
| 1448 | |
| 1449 | set testcases {} |
| 1450 | set nbtests 0 |
| 1451 | set nberr 0 |
| 1452 | set nbfail 0 |
| 1453 | set nbskip 0 |
| 1454 | set time 0. |
| 1455 | |
| 1456 | set group $grp |
| 1457 | set grid $grd |
| 1458 | } |
| 1459 | |
| 1460 | incr nbtests |
| 1461 | |
| 1462 | # parse test log and get its CPU time |
| 1463 | set testout {} |
| 1464 | set add_cpu {} |
| 1465 | if { [catch {set fdlog [open $logdir/$group/$grid/${casename}.log r]} ret] } { |
| 1466 | puts "Error: cannot open $logdir/$group/$grid/${casename}.log: $ret" |
| 1467 | } else { |
| 1468 | while { [gets $fdlog logline] >= 0 } { |
| 1469 | if { $include_cout } { |
| 1470 | set testout "$testout$logline\n" |
| 1471 | } |
| 1472 | if [regexp -nocase {TOTAL CPU TIME:\s*([\d.]+)\s*sec} $logline res cpu] { |
| 1473 | set add_cpu " time=\"$cpu\"" |
| 1474 | set time [expr $time + $cpu] |
| 1475 | } |
| 1476 | } |
| 1477 | close $fdlog |
| 1478 | } |
| 1479 | if { ! $include_cout } { |
| 1480 | set testout "$line\n" |
| 1481 | } |
| 1482 | |
| 1483 | # record test case with its output and status |
| 1484 | # Mapping is: SKIPPED, BAD, and OK to OK, all other to failure |
| 1485 | set testcases "$testcases\n <testcase name=\"$casename\"$add_cpu status=\"$result\">\n" |
| 1486 | set testcases "$testcases\n <system-out>\n$testout </system-out>" |
| 1487 | if { $result != "OK" } { |
| 1488 | if { [regexp -nocase {^SKIP} $result] } { |
| 1489 | incr nberr |
| 1490 | set testcases "$testcases\n <error name=\"$result\" message=\"$message\"/>" |
| 1491 | } elseif { [regexp -nocase {^BAD} $result] } { |
| 1492 | incr nbskip |
| 1493 | set testcases "$testcases\n <skipped>$message</skipped>" |
| 1494 | } else { |
| 1495 | incr nbfail |
| 1496 | set testcases "$testcases\n <failure name=\"$result\" message=\"$message\"/>" |
| 1497 | } |
| 1498 | } |
| 1499 | set testcases "$testcases\n </testcase>" |
| 1500 | } |
| 1501 | |
| 1502 | # write last test suite |
| 1503 | if [info exists testcases] { eval $cmd_testsuite } |
| 1504 | |
| 1505 | # the end |
| 1506 | puts $fd "</testsuites>" |
| 1507 | close $fd |
| 1508 | return |
| 1509 | } |
| 1510 | |
| 1511 | # define custom platform name |
| 1512 | proc _tests_platform_def {} { |
| 1513 | global env tcl_platform |
| 1514 | |
| 1515 | if [info exists env(os_type)] { return } |
| 1516 | |
| 1517 | set env(os_type) $tcl_platform(platform) |
| 1518 | |
| 1519 | # use detailed mapping for various versions of Lunix |
| 1520 | # (note that mapping is rather non-uniform, for historical reasons) |
| 1521 | if { $tcl_platform(os) == "Linux" && ! [catch {exec cat /etc/issue} issue] } { |
| 1522 | if { [regexp {Mandriva[ \tA-Za-z]+([0-9]+)} $issue res num] } { |
| 1523 | set env(os_type) Mandriva$num |
| 1524 | } elseif { [regexp {Red Hat[ \tA-Za-z]+([0-9]+)} $issue res num] } { |
| 1525 | set env(os_type) RedHat$num |
| 1526 | } elseif { [regexp {Debian[ \tA-Za-z/]+([0-9]+)[.]([0-9]+)} $issue res num subnum] } { |
| 1527 | set env(os_type) Debian$num$subnum |
| 1528 | } elseif { [regexp {CentOS[ \tA-Za-z]+([0-9]+)[.]([0-9]+)} $issue res num subnum] } { |
| 1529 | set env(os_type) CentOS$num$subnum |
| 1530 | } elseif { [regexp {Scientific[ \tA-Za-z]+([0-9]+)[.]([0-9]+)} $issue res num subnum] } { |
| 1531 | set env(os_type) SL$num$subnum |
| 1532 | } elseif { [regexp {Fedora Core[ \tA-Za-z]+([0-9]+)} $issue res num] } { |
| 1533 | set env(os_type) FedoraCore$num |
| 1534 | } |
| 1535 | if { [exec uname -m] == "x86_64" } { |
| 1536 | set env(os_type) "$env(os_type)-64" |
| 1537 | } |
| 1538 | } elseif { $tcl_platform(os) == "Darwin" } { |
| 1539 | set env(os_type) MacOS |
| 1540 | } |
| 1541 | } |
| 1542 | _tests_platform_def |
| 1543 | |
| 1544 | # Auxiliary procedure to split path specification (usually defined by |
| 1545 | # environment variable) into list of directories or files |
| 1546 | proc _split_path {pathspec} { |
| 1547 | global tcl_platform |
| 1548 | |
| 1549 | # first replace all \ (which might occur on Windows) by / |
| 1550 | regsub -all "\\\\" $pathspec "/" pathspec |
| 1551 | |
| 1552 | # split path by platform-specific separator |
| 1553 | return [split $pathspec [_path_separator]] |
| 1554 | } |
| 1555 | |
| 1556 | # Auxiliary procedure to define platform-specific separator for directories in |
| 1557 | # path specification |
| 1558 | proc _path_separator {} { |
| 1559 | global tcl_platform |
| 1560 | |
| 1561 | # split path by platform-specific separator |
| 1562 | if { $tcl_platform(platform) == "windows" } { |
| 1563 | return ";" |
| 1564 | } else { |
| 1565 | return ":" |
| 1566 | } |
| 1567 | } |
| 1568 | |
| 1569 | # Procedure to make a diff and common of two lists |
| 1570 | proc _list_diff {list1 list2 _in1 _in2 _common} { |
| 1571 | upvar $_in1 in1 |
| 1572 | upvar $_in2 in2 |
| 1573 | upvar $_common common |
| 1574 | |
| 1575 | set in1 {} |
| 1576 | set in2 {} |
| 1577 | set common {} |
| 1578 | foreach item $list1 { |
| 1579 | if { [lsearch -exact $list2 $item] >= 0 } { |
| 1580 | lappend common $item |
| 1581 | } else { |
| 1582 | lappend in1 $item |
| 1583 | } |
| 1584 | } |
| 1585 | foreach item $list2 { |
| 1586 | if { [lsearch -exact $common $item] < 0 } { |
| 1587 | lappend in2 $item |
| 1588 | } |
| 1589 | } |
| 1590 | return |
| 1591 | } |
| 1592 | |
| 1593 | # procedure to load a file to Tcl string |
| 1594 | proc _read_file {filename} { |
| 1595 | set fd [open $filename r] |
| 1596 | set result [read -nonewline $fd] |
| 1597 | close $fd |
| 1598 | return $result |
| 1599 | } |
| 1600 | |
| 1601 | # procedure to construct name for the mage diff file |
| 1602 | proc _diff_img_name {dir1 dir2 casepath imgfile} { |
| 1603 | return [file join $dir1 $casepath "diff-[file tail $dir2]-$imgfile"] |
| 1604 | } |
| 1605 | |
| 1606 | # Procedure to compare results of two runs of test cases |
| 1607 | proc _test_diff {dir1 dir2 basename status verbose _logvar {_statvar ""}} { |
| 1608 | upvar $_logvar log |
| 1609 | |
| 1610 | # make sure to load diffimage command |
| 1611 | uplevel pload VISUALIZATION |
| 1612 | |
| 1613 | # prepare variable (array) for collecting statistics |
| 1614 | if { "$_statvar" != "" } { |
| 1615 | upvar $_statvar stat |
| 1616 | } else { |
| 1617 | set stat(cpu1) 0 |
| 1618 | set stat(cpu2) 0 |
| 1619 | set stat(mem1) 0 |
| 1620 | set stat(mem2) 0 |
| 1621 | set log {} |
| 1622 | } |
| 1623 | |
| 1624 | # first check subdirectories |
| 1625 | set path1 [file join $dir1 $basename] |
| 1626 | set path2 [file join $dir2 $basename] |
| 1627 | set list1 [glob -directory $path1 -types d -tails -nocomplain *] |
| 1628 | set list2 [glob -directory $path2 -types d -tails -nocomplain *] |
| 1629 | if { [llength $list1] >0 || [llength $list2] > 0 } { |
| 1630 | _list_diff $list1 $list2 in1 in2 common |
| 1631 | if { "$verbose" > 1 } { |
| 1632 | if { [llength $in1] > 0 } { _log_and_puts log "Only in $path1: $in1" } |
| 1633 | if { [llength $in2] > 0 } { _log_and_puts log "Only in $path2: $in2" } |
| 1634 | } |
| 1635 | foreach subdir $common { |
| 1636 | if { "$verbose" > 2 } { |
| 1637 | _log_and_puts log "Checking [file join $basename $subdir]" |
| 1638 | } |
| 1639 | _test_diff $dir1 $dir2 [file join $basename $subdir] $status $verbose log stat |
| 1640 | } |
| 1641 | } else { |
| 1642 | # check log files (only if directory has no subdirs) |
| 1643 | set list1 [glob -directory $path1 -types f -tails -nocomplain *.log] |
| 1644 | set list2 [glob -directory $path2 -types f -tails -nocomplain *.log] |
| 1645 | _list_diff $list1 $list2 in1 in2 common |
| 1646 | if { "$verbose" > 1 } { |
| 1647 | if { [llength $in1] > 0 } { _log_and_puts log "Only in $path1: $in1" } |
| 1648 | if { [llength $in2] > 0 } { _log_and_puts log "Only in $path2: $in2" } |
| 1649 | } |
| 1650 | foreach logfile $common { |
| 1651 | # load two logs |
| 1652 | set log1 [_read_file [file join $dir1 $basename $logfile]] |
| 1653 | set log2 [_read_file [file join $dir2 $basename $logfile]] |
| 1654 | set casename [file rootname $logfile] |
| 1655 | |
| 1656 | # check execution statuses |
| 1657 | set status1 UNDEFINED |
| 1658 | set status2 UNDEFINED |
| 1659 | if { ! [regexp {CASE [^:]*:\s*([\w]+)} $log1 res1 status1] || |
| 1660 | ! [regexp {CASE [^:]*:\s*([\w]+)} $log2 res2 status2] || |
| 1661 | "$status1" != "$status2" } { |
| 1662 | _log_and_puts log "STATUS [split $basename /] $casename: $status1 / $status2" |
| 1663 | |
| 1664 | # if test statuses are different, further comparison makes |
| 1665 | # no sense unless explicitly requested |
| 1666 | if { "$status" != "all" } { |
| 1667 | continue |
| 1668 | } |
| 1669 | } |
| 1670 | if { "$status" == "ok" && "$status1" != "OK" } { |
| 1671 | continue |
| 1672 | } |
| 1673 | |
| 1674 | # check CPU times |
| 1675 | set cpu1 UNDEFINED |
| 1676 | set cpu2 UNDEFINED |
| 1677 | if { [regexp {TOTAL CPU TIME:\s*([\d.]+)} $log1 res1 cpu1] && |
| 1678 | [regexp {TOTAL CPU TIME:\s*([\d.]+)} $log2 res1 cpu2] } { |
| 1679 | set stat(cpu1) [expr $stat(cpu1) + $cpu1] |
| 1680 | set stat(cpu2) [expr $stat(cpu2) + $cpu2] |
| 1681 | |
| 1682 | # compare CPU times with 10% precision (but not less 0.5 sec) |
| 1683 | if { [expr abs ($cpu1 - $cpu2) > 0.5 + 0.05 * abs ($cpu1 + $cpu2)] } { |
| 1684 | _log_and_puts log "CPU [split $basename /] $casename: $cpu1 / $cpu2" |
| 1685 | } |
| 1686 | } |
| 1687 | |
| 1688 | # check memory delta |
| 1689 | set mem1 UNDEFINED |
| 1690 | set mem2 UNDEFINED |
| 1691 | if { [regexp {MEMORY DELTA:\s*([\d.]+)} $log1 res1 mem1] && |
| 1692 | [regexp {MEMORY DELTA:\s*([\d.]+)} $log2 res1 mem2] } { |
| 1693 | set stat(mem1) [expr $stat(mem1) + $mem1] |
| 1694 | set stat(mem2) [expr $stat(mem2) + $mem2] |
| 1695 | |
| 1696 | # compare memory usage with 10% precision (but not less 16 KiB) |
| 1697 | if { [expr abs ($mem1 - $mem2) > 16 + 0.05 * abs ($mem1 + $mem2)] } { |
| 1698 | _log_and_puts log "MEMORY [split $basename /] $casename: $mem1 / $mem2" |
| 1699 | } |
| 1700 | } |
| 1701 | |
| 1702 | # check images |
| 1703 | set imglist1 [glob -directory $path1 -types f -tails -nocomplain $casename*.{png,gif}] |
| 1704 | set imglist2 [glob -directory $path2 -types f -tails -nocomplain $casename*.{png,gif}] |
| 1705 | _list_diff $imglist1 $imglist2 imgin1 imgin2 imgcommon |
| 1706 | if { "$verbose" > 1 } { |
| 1707 | if { [llength $imgin1] > 0 } { _log_and_puts log "Only in $path1: $imgin1" } |
| 1708 | if { [llength $imgin2] > 0 } { _log_and_puts log "Only in $path2: $imgin2" } |
| 1709 | } |
| 1710 | foreach imgfile $imgcommon { |
| 1711 | # if { $verbose > 1 } { _log_and_puts log "Checking [split basename /] $casename: $imgfile" } |
| 1712 | set diffile [_diff_img_name $dir1 $dir2 $basename $imgfile] |
| 1713 | if { [catch {diffimage [file join $dir1 $basename $imgfile] \ |
| 1714 | [file join $dir2 $basename $imgfile] \ |
| 1715 | 0 0 0 $diffile} diff] } { |
| 1716 | _log_and_puts log "IMAGE [split $basename /] $casename: $imgfile cannot be compared" |
| 1717 | file delete -force $diffile ;# clean possible previous result of diffimage |
| 1718 | } elseif { $diff != 0 } { |
| 1719 | _log_and_puts log "IMAGE [split $basename /] $casename: $imgfile differs" |
| 1720 | } else { |
| 1721 | file delete -force $diffile ;# clean useless artifact of diffimage |
| 1722 | } |
| 1723 | } |
| 1724 | } |
| 1725 | } |
| 1726 | |
| 1727 | if { "$_statvar" == "" } { |
| 1728 | _log_and_puts log "Total MEMORY difference: $stat(mem1) / $stat(mem2)" |
| 1729 | _log_and_puts log "Total CPU difference: $stat(cpu1) / $stat(cpu2)" |
| 1730 | } |
| 1731 | } |
| 1732 | |
| 1733 | # Auxiliary procedure to save log of results comparison to file |
| 1734 | proc _log_html_diff {file log dir1 dir2} { |
| 1735 | # create missing directories as needed |
| 1736 | catch {file mkdir [file dirname $file]} |
| 1737 | |
| 1738 | # try to open a file |
| 1739 | if [catch {set fd [open $file w]} res] { |
| 1740 | error "Error saving log file $file: $res" |
| 1741 | } |
| 1742 | |
| 1743 | # print header |
| 1744 | puts $fd "<html><head><title>Diff $dir1 vs. $dir2</title></head><body>" |
| 1745 | puts $fd "<h1>Comparison of test results: $dir1 vs. $dir2</h1>" |
| 1746 | |
| 1747 | # print log body, trying to add HTML links to script files on lines like |
| 1748 | # "Executing <filename>..." |
| 1749 | puts $fd "<pre>" |
| 1750 | set logpath [file split [file normalize $file]] |
| 1751 | foreach line $log { |
| 1752 | puts $fd $line |
| 1753 | |
| 1754 | if { [regexp {IMAGE[ \t]+([^:]+):[ \t]+([A-Za-z0-9_.-]+)} $line res case img] } { |
| 1755 | if { [catch {eval file join "" [lrange $case 0 end-1]} gridpath] } { |
| 1756 | # note: special handler for the case if test grid directoried are compared directly |
| 1757 | set gridpath "" |
| 1758 | } |
| 1759 | set img1 "<img src=\"[_make_url $file [file join $dir1 $gridpath $img]]\">" |
| 1760 | set img2 "<img src=\"[_make_url $file [file join $dir2 $gridpath $img]]\">" |
| 1761 | |
| 1762 | set difffile [_diff_img_name $dir1 $dir2 $gridpath $img] |
| 1763 | if { [file exists $difffile] } { |
| 1764 | set imgd "<img src=\"[_make_url $file $difffile]\">" |
| 1765 | } else { |
| 1766 | set imgd "N/A" |
| 1767 | } |
| 1768 | |
| 1769 | puts $fd "<table><tr><th>[file tail $dir1]</th><th>[file tail $dir2]</th><th>Different pixels</th></tr>" |
| 1770 | puts $fd "<tr><td>$img1</td><td>$img2</td><td>$imgd</td></tr></table>" |
| 1771 | } |
| 1772 | } |
| 1773 | puts $fd "</pre></body></html>" |
| 1774 | |
| 1775 | close $fd |
| 1776 | return |
| 1777 | } |
| 1778 | |
| 1779 | # get number of CPUs on the system |
| 1780 | proc _get_nb_cpus {} { |
| 1781 | global tcl_platform env |
| 1782 | |
| 1783 | if { "$tcl_platform(platform)" == "windows" } { |
| 1784 | # on Windows, take the value of the environment variable |
| 1785 | if { [info exists env(NUMBER_OF_PROCESSORS)] && |
| 1786 | ! [catch {expr $env(NUMBER_OF_PROCESSORS) > 0} res] && $res >= 0 } { |
| 1787 | return $env(NUMBER_OF_PROCESSORS) |
| 1788 | } |
| 1789 | } elseif { "$tcl_platform(os)" == "Linux" } { |
| 1790 | # on Linux, take number of logical processors listed in /proc/cpuinfo |
| 1791 | if { [catch {open "/proc/cpuinfo" r} fd] } { |
| 1792 | return 0 ;# should never happen, but... |
| 1793 | } |
| 1794 | set nb 0 |
| 1795 | while { [gets $fd line] >= 0 } { |
| 1796 | if { [regexp {^processor[ \t]*:} $line] } { |
| 1797 | incr nb |
| 1798 | } |
| 1799 | } |
| 1800 | close $fd |
| 1801 | return $nb |
| 1802 | } elseif { "$tcl_platform(os)" == "Darwin" } { |
| 1803 | # on MacOS X, call sysctl command |
| 1804 | if { ! [catch {exec sysctl hw.ncpu} ret] && |
| 1805 | [regexp {^hw[.]ncpu[ \t]*:[ \t]*([0-9]+)} $ret res nb] } { |
| 1806 | return $nb |
| 1807 | } |
| 1808 | } |
| 1809 | |
| 1810 | # if cannot get good value, return 0 as default |
| 1811 | return 0 |
| 1812 | } |
| 1813 | |
| 1814 | # check two files for difference |
| 1815 | proc _diff_files {file1 file2} { |
| 1816 | set fd1 [open $file1 "r"] |
| 1817 | set fd2 [open $file2 "r"] |
| 1818 | |
| 1819 | set differ f |
| 1820 | while {! $differ} { |
| 1821 | set nb1 [gets $fd1 line1] |
| 1822 | set nb2 [gets $fd2 line2] |
| 1823 | if { $nb1 != $nb2 } { set differ t; break } |
| 1824 | if { $nb1 < 0 } { break } |
| 1825 | if { [string compare $line1 $line2] } { |
| 1826 | set differ t |
| 1827 | } |
| 1828 | } |
| 1829 | |
| 1830 | close $fd1 |
| 1831 | close $fd2 |
| 1832 | |
| 1833 | return $differ |
| 1834 | } |
| 1835 | |
| 1836 | # Check if file is in DOS encoding. |
| 1837 | # This check is done by presence of \r\n combination at the end of the first |
| 1838 | # line (i.e. prior to any other \n symbol). |
| 1839 | # Note that presence of non-ascii symbols typically used for recognition |
| 1840 | # of binary files is not suitable since some IGES and STEP files contain |
| 1841 | # non-ascii symbols. |
| 1842 | # Special check is added for PNG files which contain \r\n in the beginning. |
| 1843 | proc _check_dos_encoding {file} { |
| 1844 | set fd [open $file rb] |
| 1845 | set isdos f |
| 1846 | if { [gets $fd line] && [regexp {.*\r$} $line] && |
| 1847 | ! [regexp {^.PNG} $line] } { |
| 1848 | set isdos t |
| 1849 | } |
| 1850 | close $fd |
| 1851 | return $isdos |
| 1852 | } |
| 1853 | |
| 1854 | # procedure to recognize format of a data file by its first symbols (for OCCT |
| 1855 | # BREP and geometry DRAW formats, IGES, and STEP) and extension (all others) |
| 1856 | proc _check_file_format {file} { |
| 1857 | set fd [open $file rb] |
| 1858 | set line [read $fd 1024] |
| 1859 | close $fd |
| 1860 | |
| 1861 | set warn f |
| 1862 | set ext [file extension $file] |
| 1863 | set format unknown |
| 1864 | if { [regexp {^DBRep_DrawableShape} $line] } { |
| 1865 | set format BREP |
| 1866 | if { "$ext" != ".brep" && "$ext" != ".rle" && |
| 1867 | "$ext" != ".draw" && "$ext" != "" } { |
| 1868 | set warn t |
| 1869 | } |
| 1870 | } elseif { [regexp {^DrawTrSurf_} $line] } { |
| 1871 | set format DRAW |
| 1872 | if { "$ext" != ".rle" && |
| 1873 | "$ext" != ".draw" && "$ext" != "" } { |
| 1874 | set warn t |
| 1875 | } |
| 1876 | } elseif { [regexp {^[ \t]*ISO-10303-21} $line] } { |
| 1877 | set format STEP |
| 1878 | if { "$ext" != ".step" && "$ext" != ".stp" } { |
| 1879 | set warn t |
| 1880 | } |
| 1881 | } elseif { [regexp {^.\{72\}S[0 ]\{6\}1} $line] } { |
| 1882 | set format IGES |
| 1883 | if { "$ext" != ".iges" && "$ext" != ".igs" } { |
| 1884 | set warn t |
| 1885 | } |
| 1886 | } elseif { "$ext" == ".igs" } { |
| 1887 | set format IGES |
| 1888 | } elseif { "$ext" == ".stp" } { |
| 1889 | set format STEP |
| 1890 | } else { |
| 1891 | set format [string toupper [string range $ext 1 end]] |
| 1892 | } |
| 1893 | |
| 1894 | if { $warn } { |
| 1895 | puts "$file: Warning: extension ($ext) does not match format ($format)" |
| 1896 | } |
| 1897 | |
| 1898 | return $format |
| 1899 | } |
| 1900 | |
| 1901 | # procedure to load file knowing its format |
| 1902 | proc load_data_file {file format shape} { |
| 1903 | switch $format { |
| 1904 | BREP { uplevel restore $file $shape } |
| 1905 | DRAW { uplevel restore $file $shape } |
| 1906 | IGES { pload XSDRAW; uplevel igesbrep $file $shape * } |
| 1907 | STEP { pload XSDRAW; uplevel stepread $file __a *; uplevel renamevar __a_1 $shape } |
| 1908 | STL { pload XSDRAW; uplevel readstl $shape $file } |
| 1909 | default { error "Cannot read $format file $file" } |
| 1910 | } |
| 1911 | } |
| 1912 | |
| 1913 | # procedure to get name of temporary directory, |
| 1914 | # ensuring it is existing and writeable |
| 1915 | proc _get_temp_dir {} { |
| 1916 | global env tcl_platform |
| 1917 | |
| 1918 | # check typical environment variables |
| 1919 | foreach var {TempDir Temp Tmp} { |
| 1920 | # check different case |
| 1921 | foreach name [list [string toupper $var] $var [string tolower $var]] { |
| 1922 | if { [info exists env($name)] && [file isdirectory $env($name)] && |
| 1923 | [file writable $env($name)] } { |
| 1924 | return [regsub -all {\\} $env($name) /] |
| 1925 | } |
| 1926 | } |
| 1927 | } |
| 1928 | |
| 1929 | # check platform-specific locations |
| 1930 | set fallback tmp |
| 1931 | if { "$tcl_platform(platform)" == "windows" } { |
| 1932 | set paths "c:/TEMP c:/TMP /TEMP /TMP" |
| 1933 | if { [info exists env(HOMEDRIVE)] && [info exists env(HOMEPATH)] } { |
| 1934 | set fallback [regsub -all {\\} "$env(HOMEDRIVE)$(HOMEPATH)/tmp" /] |
| 1935 | } |
| 1936 | } else { |
| 1937 | set paths "/tmp /var/tmp /usr/tmp" |
| 1938 | if { [info exists env(HOME)] } { |
| 1939 | set fallback "$env(HOME)/tmp" |
| 1940 | } |
| 1941 | } |
| 1942 | foreach dir $paths { |
| 1943 | if { [file isdirectory $dir] && [file writable $dir] } { |
| 1944 | return $dir |
| 1945 | } |
| 1946 | } |
| 1947 | |
| 1948 | # fallback case: use subdir /tmp of home or current dir |
| 1949 | file mkdir $fallback |
| 1950 | return $fallback |
| 1951 | } |
| 1952 | |
| 1953 | # extract of code from testgrid command used to process jobs running in |
| 1954 | # parallel until number of jobs in the queue becomes equal or less than |
| 1955 | # specified value |
| 1956 | proc _testgrid_process_jobs {worker {nb_ok 0}} { |
| 1957 | # bind local vars to variables of the caller procedure |
| 1958 | upvar log log |
| 1959 | upvar logdir logdir |
| 1960 | upvar job_def job_def |
| 1961 | upvar nbpooled nbpooled |
| 1962 | upvar userbreak userbreak |
| 1963 | upvar refresh refresh |
| 1964 | upvar refresh_timer refresh_timer |
| 1965 | |
| 1966 | catch {tpool::resume $worker} |
| 1967 | while { ! $userbreak && $nbpooled > $nb_ok } { |
| 1968 | foreach job [tpool::wait $worker [array names job_def]] { |
| 1969 | eval _log_test_case \[tpool::get $worker $job\] $job_def($job) log |
| 1970 | unset job_def($job) |
| 1971 | incr nbpooled -1 |
| 1972 | } |
| 1973 | |
| 1974 | # check for user break |
| 1975 | if { "[info commands dbreak]" == "dbreak" && [catch dbreak] } { |
| 1976 | set userbreak 1 |
| 1977 | } |
| 1978 | |
| 1979 | # update summary log with requested period |
| 1980 | if { $logdir != "" && $refresh > 0 && [clock seconds] > $refresh_timer + $refresh } { |
| 1981 | _log_summarize $logdir $log |
| 1982 | set refresh_timer [clock seconds] |
| 1983 | } |
| 1984 | } |
| 1985 | catch {tpool::suspend $worker} |
| 1986 | } |