0030675: Visualization - remove redundant proxy classes in hierarchy of PrsMgr_Presen...

[occt.git] / src / XSMessage / XSMessage_XSTEP_us.pxx

// This file has been automatically generated from resource file src/XSMessage/XSTEP.us

static const char XSMessage_XSTEP_us[] =
  "!LOADING PHASE\n"
  ".XSTEP_1\n"
  "Beginning of IGES file memory loading.\n"
  "!\n"
  ".XSTEP_2\n"
  "IGES file opening error.\n"
  "!\n"
  ".XSTEP_3\n"
  "Reason : No such file or directory.\n"
  "!\n"
  ".XSTEP_4\n"
  "Reason : Not enough space.\n"
  "!\n"
  ".XSTEP_5\n"
  "Reason : Permission denied.\n"
  "!\n"
  ".XSTEP_6\n"
  "Reason : Too many open files.\n"
  "!\n"
  ".XSTEP_7\n"
  "Reason : No determined.\n"
  "!\n"
  ".XSTEP_8\n"
  "End of loading IGES file to memory (Elapsed time : %s).\n"
  "\n"
  "!\n"
  ".XSTEP_9\n"
  "Beginning of IGES file reading.\n"
  "!\n"
  ".XSTEP_10\n"
  "End of IGES file reading.\n"
  "!\n"
  ".XSTEP_11\n"
  "Internal error during file header reading. Process continues.\n"
  "!\n"
  ".XSTEP_12\n"
  "Header and content of IGES file are loaded.\n"
  "!\n"
  ".XSTEP_13\n"
  "Internal error during reading of entity %d.\n"
  "!\n"
  ".XSTEP_14\n"
  "Internal error during reading of entity %d (parameter %d).\n"
  "!\n"
  ".XSTEP_15\n"
  "Total number of loaded entities %d.\n"
  "!\n"
  ".XSTEP_16\n"
  "Beginning of model loading.\n"
  "!\n"
  ".XSTEP_17\n"
  "End of model loading.\n"
  "!\n"
  ".XSTEP_18\n"
  "Syntax error in IGES file at line %d in section %s.\n"
  "!\n"
  ".XSTEP_19\n"
  "Syntax error in IGES file at line %d in section %s (line number may be incorrect).\n"
  "!\n"
  ".XSTEP_20\n"
  "There is no Terminate Section, please check end of IGES file. Process continues.\n"
  "!\n"
  ".XSTEP_21\n"
  "Number of ignored Null Entities : %d.\n"
  "!\n"
  ".XSTEP_22\n"
  " Unknown entity %s.\n"
  "!\n"
  ".XSTEP_23\n"
  " Recovered entity %s.\n"
  "!\n"
  ".XSTEP_24\n"
  "Report : %d unknown entities.\n"
  "!\n"
  ".XSTEP_25\n"
  "Number of fails in memory loading : %d.\n"
  "!\n"
  ".XSTEP_26\n"
  "Number of warnings in memory loading : %d.\n"
  "!\n"
  ".XSTEP_27\n"
  " Directory Entry : there is no parameter. Process continues.\n"
  "!\n"
  ".XSTEP_28\n"
  " Directory Entry : parameter 1 (entity type) is incorrect.\n"
  "!\n"
  ".XSTEP_29\n"
  " Directory Entry : Field 4 (Line Font Pattern) is incorrect (Non null pointer or Integer between 0 and 5 was expected).\n"
  "!\n"
  ".XSTEP_30\n"
  " Directory Entry : Field 5 (Level) isincorrect (Not null pointer or not null Integer was expected).\n"
  "!\n"
  ".XSTEP_31\n"
  " Directory Entry : Field 6 (View) is incorrect (Not null pointer or Integer Zero was expected).\n"
  "!\n"
  ".XSTEP_32\n"
  " Directory Entry : Field 7 (Transformation Matrix) is incorrect (Not null pointer or Integer Zero was expected).\n"
  "!\n"
  ".XSTEP_33\n"
  " Directory Entry : Field 8 (Label Display Associativity) is incorrect (Not null pointer or Integer Zero was expected).\n"
  "!\n"
  ".XSTEP_34\n"
  " Directory Entry : Field 13 (Color Number) is incorrect (Not null pointer or Integer between 0 and 8 was expected).\n"
  "!\n"
  ".XSTEP_35\n"
  " Null entity %s.\n"
  "!\n"
  ".XSTEP_36\n"
  " Unknown entity %s.\n"
  "!\n"
  ".XSTEP_37\n"
  " Associativity list is incorrect.\n"
  "!\n"
  ".XSTEP_38\n"
  " Property list is incorrect.\n"
  "! ANALYSIS PHASE\n"
  ".XSTEP_39\n"
  "Global Section : Incorrect number of parameters (%d or %d parameters were expected).\n"
  "!\n"
  ".XSTEP_40\n"
  "Global Section (Parameters 1 and 2) : Parameter Delimiter Character and Record Delimiter Character must not have the same value.\n"
  "!\n"
  ".XSTEP_41\n"
  "Global Section (Parameter 2) : Parameter Delimiter Character is incorrect. Default character comma taken.\n"
  "!\n"
  ".XSTEP_42\n"
  "Global Section (Parameter 2) : Character Record Delimiter parameter is incorrect. Default character Semicolon taken.\n"
  "!\n"
  ".XSTEP_43\n"
  "Global Section (Parameter 8) : Single Precision Magnitude parameter is incorrect (Expected positive Integer). Default value 38 taken.\n"
  "!\n"
  ".XSTEP_44\n"
  "Global Section (Parameter 9) : Single Precision Significance parameter is incorrect (Expected positive Integer). Default value 6 taken.\n"
  "!\n"
  ".XSTEP_45\n"
  "Global Section (Parameter 10) : Double Precision Magnitude parameter is incorrect (Expected positive Integer). Default value 308 taken.\n"
  "!\n"
  ".XSTEP_46\n"
  "Global Section (Parameter 11) : Double Precision Significance parameter is incorrect (Expected positive Integer). Default value 15 taken.\n"
  "!\n"
  ".XSTEP_47\n"
  "Global Section (Parameter 13) : Model Space Scale parameter is incorrect (Expected positive Real). Default value 1.0 taken.\n"
  "!\n"
  ".XSTEP_48\n"
  "Global Section (Parameter 14) : Unit Flag parameter is incorrect  (Integer between 1 et 11 was expected). Default value 2 taken : Millimeters.\n"
  "!\n"
  ".XSTEP_49\n"
  "Global Section (Parameter 15): Unit Name parameter is not recognized. Default value 2 taken : Millimeters.srl\n"
  "!\n"
  ".XSTEP_50\n"
  "Global Section (Parameter 15) : Unit Name parameter is undefined : Unit Name ignored.\n"
  "!\n"
  ".XSTEP_51\n"
  "Global Section (Parameter 14 and 15) : Unit Flag parameter does not correspond to Unit Name parameter : Unit Name ignored.\n"
  "!\n"
  ".XSTEP_52\n"
  "Global Section (Parameter 19) :   (Expected positive Real). Default value 0.0 taken.\n"
  "!\n"
  ".XSTEP_53\n"
  "Global Section (Parameter 23) : Version Flag parameter is incorrect (Integer between 1 et 11 was expected. Default value 3 taken : Version 2.0.\n"
  "!\n"
  ".XSTEP_54\n"
  "Global Section (Parameter 24) : Drafting Standard Flag parameter is incorrect (Integer between 0 et 7). Default value 3 taken : No standard.Global Section (Parameter 25) : Last change Date parameter was undefined.\n"
  "!\n"
  ".XSTEP_55\n"
  "Global Section (Parameter 25) : Last Change Date parameter is undefined.\n"
  "!\n"
  ".XSTEP_56\n"
  "Global Section (Parameter %d) : Date parameter is undefined.\n"
  "!\n"
  ".XSTEP_57\n"
  "Global Section (Parameter %d) : Incorrect Date Format.\n"
  "!\n"
  ".XSTEP_58\n"
  " Directory Entry (Field 1) : entity type number field is incorrect (Expected Integer : %d).\n"
  "!\n"
  ".XSTEP_59\n"
  " Directory Entry (Field 3) : Structure field is undefined.\n"
  "!\n"
  ".XSTEP_60\n"
  " Directory Entry (Field 4) : Line Font Pattern field is incorrect (Pointer or Integer between 0 and 5 was expected). Default value 0 taken.\n"
  "!\n"
  ".XSTEP_61\n"
  " Directory Entry (Field 5) : Level field is incorrect (Pointer or Integer were expected). Default value 0 taken.\n"
  "!\n"
  ".XSTEP_62\n"
  " Directory Entry (Field 6) : View field is incorrect (Pointer or Zero were expected). Default value 0 taken.\n"
  "!\n"
  ".XSTEP_63\n"
  " Directory Entry (Field 7): Transformation Matrix field is incorrect (Pointer or Zero were expected). Default value 0 taken.\n"
  "!\n"
  ".XSTEP_64\n"
  " Directory Entry (Field 8): Label Display entity  field is incorrect (Pointer or Zero were expected). Default value 0 taken.\n"
  "!\n"
  ".XSTEP_65\n"
  " Directory Entry (Field 9) : Blank Status field is incorrect (Expected Integer : 0 or 1). \n"
  "!\n"
  ".XSTEP_66\n"
  " Directory Entry (Field 9) : Subordinate entity Switch field is incorrect (Integer between 0 and 3 was expected). \n"
  "!\n"
  ".XSTEP_67\n"
  " Directory Entry (Field 9) : entity Use Flag is incorrect  (Integer between 0 and 6 was expected). \n"
  "!\n"
  ".XSTEP_68\n"
  " Directory Entry (Field 9) : Hierarchy field is incorrect (Integer between 0 and 2 was expected). \n"
  "!\n"
  ".XSTEP_69\n"
  " Directory Entry (Field 12) : Line Weight Number is undefined.\n"
  "!\n"
  ".XSTEP_70\n"
  " Directory Entry (Field 13) : Color Number field is incorrect (Pointer or Integer between 0 and 8 was expected).\n"
  "!\n"
  ".XSTEP_71\n"
  " Directory Entry (Field 15) : Form Number field is incorrect.\n"
  "!\n"
  ".XSTEP_72\n"
  " Directory Entry (Field 19): entity Subscript Number field is incorrect (Integer was expected).\n"
  "!Type 116\n"
  ".XSTEP_73\n"
  "Parameter Data  : parameter %d (Coordinate of Point) is incorrect (Real was expected).\n"
  "!Type 116\n"
  ".XSTEP_74\n"
  "Parameter Data  : parameter %d (Display Symbol) is incorrect (Subfigure Definition entity, Type 308 was expected).\n"
  "!Type 100\n"
  ".XSTEP_75\n"
  "Parameter Data  : parameter 1 (ZT displacement of Arc) is incorrect (Real was expected).\n"
  "!Type 100\n"
  ".XSTEP_76\n"
  "Parameter Data  : parameter %d (Arc Center) is incorrect (Real was expected).\n"
  "!Type 100\n"
  ".XSTEP_77\n"
  "Parameter Data  : parameter %d (Start Point) is incorrect (Real was expected).\n"
  "!Type 100\n"
  ".XSTEP_78\n"
  "Parameter Data  : parameter %d (Terminate Point) is incorrect (Real was expected).\n"
  "!Type 102\n"
  ".XSTEP_79\n"
  "Parameter Data : parameter 1 (Number of Entities) is incorrect : %d (Expected positive Integer).\n"
  "!Type 102\n"
  ".XSTEP_80\n"
  "Parameter Data : Some pointers in entity list are null or negative : ignored (Point, Connect Point or Parameterized Curve Entities were expected).\n"
  "!Type 104\n"
  ".XSTEP_81\n"
  "Parameter Data : parameter %d (Conic Coefficient)  is incorrect (Real was expected).\n"
  "!Type 104\n"
  ".XSTEP_82\n"
  "Parameter Data : parameter 7 (Coordinate of Plane) is incorrect (Real was expected).\n"
  "!Type 104\n"
  ".XSTEP_83\n"
  "Parameter Data : parameter %d (Starting Point) is incorrect (Real was expected).\n"
  "!Type 104\n"
  ".XSTEP_84\n"
  "Parameter Data : parameter %d (Terminate Point) is incorrect (Real was expected).\n"
  "!Type 106\n"
  ".XSTEP_85\n"
  "Parameter Data : parameter 1 (Interpretation Flag) is incorrect (Expected Integer : %d).\n"
  "!Type 106\n"
  ".XSTEP_86\n"
  "Parameter Data : parameter 2 (Number of n-tuples) is incorrect (Expected positive Integer).\n"
  "!Type 106\n"
  ".XSTEP_87\n"
  "Parameter Data : parameter 3 (Common Z Displacement) is incorrect (Real was expected).\n"
  "!Type 106\n"
  ".XSTEP_88\n"
  "Parameter Data : not all Data Point parameters are of Real type.\n"
  "!Type 110\n"
  ".XSTEP_89\n"
  "Parameter Data  : parameter %d (Starting Point) is incorrect (Real was expected).\n"
  "!Type 110\n"
  ".XSTEP_90\n"
  "Parameter Data  : parameter %d (Terminate Point) is incorrect (Real was expected).\n"
  "!Type 112\n"
  ".XSTEP_91\n"
  "Parameter Data : parameter 1 (Spline Type) is incorrect (Integer between 1 and 6 was expected).\n"
  "!Type 112\n"
  ".XSTEP_92\n"
  "Parameter Data (Parameter 2) : parameter 2 (Degree of Continuity) is incorrect (Expected Integer).\n"
  "!Type 112\n"
  ".XSTEP_93\n"
  "Parameter Data : parameter 3 (Number of Dimensions) is incorrect (Expected Integer : 2 or 3).\n"
  "!Type 112\n"
  ".XSTEP_94\n"
  "Parameter Data : parameter 4 (Number of Segments) is incorrect (Expected positive Integer).\n"
  "!Type 112\n"
  ".XSTEP_95\n"
  "Parameter Data : not all Break Point parameters are of Real type.\n"
  "!Type 112\n"
  ".XSTEP_96\n"
  "Parameter Data : entity is planar but parameters BZ, CZ. DZ are not null.\n"
  "!Type 126\n"
  ".XSTEP_97\n"
  "Parameter Data : parameter %d (Upper Index of Sum) is incorrect (Expected positive Integer).\n"
  "!Type 126\n"
  ".XSTEP_98\n"
  "Parameter Data : parameter %d (Degree of Basis Functions) is incorrect (Expected Integer) : Default value 0 taken.\n"
  "!Type 126\n"
  ".XSTEP_99\n"
  "Parameter Data : parameter %d (Planar/Non Planar Flag) is incorrect (Expected Boolean).\n"
  "!Type 126\n"
  ".XSTEP_100\n"
  "Parameter Data : parameter %d (Open/Closed Flag) is incorrect (Expected Boolean).\n"
  "!Type 126\n"
  ".XSTEP_101\n"
  "Parameter Data : parameter %d (Rational/Polynomial Flag) is incorrect (Expected Boolean).\n"
  "!Type 126\n"
  ".XSTEP_102\n"
  "Parameter Data : parameter %d (NonPeriodic/Periodic Flag) is incorrect (Expected Boolean).\n"
  "!Type 126\n"
  ".XSTEP_103\n"
  "Parameter Data : not all Knot Sequence parameters are of Real type.\n"
  "!Type 126\n"
  ".XSTEP_104\n"
  "Parameter Data : not all Weight parameters are of positive Real type.\n"
  "!Type 126\n"
  ".XSTEP_105\n"
  "Parameter Data  : parameter %d (Control Point) is incorrect (Real was expected).\n"
  "!Type 126\n"
  ".XSTEP_106\n"
  "Parameter Data : parameter %d (Starting Value) is incorrect (Real was expected).\n"
  "!Type 126\n"
  ".XSTEP_107\n"
  "Parameter Data : parameter %d (Ending Value) is incorrect (Real was expected).\n"
  "!Type 126\n"
  ".XSTEP_108\n"
  "Parameter Data : parameter %d (Unit Normal) is incorrect (Real was expected).\n"
  "!Type 126\n"
  ".XSTEP_109\n"
  "Parameter Data : parameter %d (Unit Normal) is undefined for a planar curve.\n"
  "!Type 130\n"
  ".XSTEP_110\n"
  "Parameter Data : parameter 1 (Curve entity to be offset) is incorrect (Curve entity was expected).\n"
  "!Type 130\n"
  ".XSTEP_111\n"
  "Parameter Data : parameter 2 (Offset Distance Flag) is incorrect (Integer between 1 and 3 was expected).\n"
  "!Type 130\n"
  ".XSTEP_112\n"
  "Parameter Data : parameter 3 (Curve entity whose coordinate describes offset) is incorrect (Curve entity was expected).\n"
  "!Type 130\n"
  ".XSTEP_113\n"
  "Parameter Data : parameter 4 (Particular Coordinate) is incorrect (Expected Integer).\n"
  "!Type 130\n"
  ".XSTEP_114\n"
  "Parameter Data : parameter 5 (Tapered Offset Type Flag) is incorrect (Expected Integer).\n"
  "!Type 130\n"
  ".XSTEP_115\n"
  "Parameter Data : parameter 6 (First Offset distance) is incorrect (Real was expected).\n"
  "!Type 130\n"
  ".XSTEP_116\n"
  "Parameter Data : parameter 7 (Arc Length of First Offset Distance) is incorrect (Real was expected).\n"
  "!Type 130\n"
  ".XSTEP_117\n"
  "Parameter Data : parameter 8 (Second Offset Distance) is incorrect (Real was expected).\n"
  "!Type 130\n"
  ".XSTEP_118\n"
  "Parameter Data : parameter 9 (Arc Length of Second Offset Distance) is incorrect (Real was expected).\n"
  "!Type 130\n"
  ".XSTEP_119\n"
  "Parameter Data : parameter 13 (Offset Curve Starting Parameter Value) is incorrect (Real was expected).\n"
  "!Type 130\n"
  ".XSTEP_120\n"
  "Parameter Data : parameter 14 (Offset Curve Ending Parameter Value) is incorrect (Real was expected).\n"
  "!Type 130\n"
  ".XSTEP_121\n"
  "Parameter Data  : parameter %d (Unit Vector Normal to plane) is incorrect (Real was expected).\n"
  "!Type 141\n"
  ".XSTEP_122\n"
  "Parameter Data : parameter 1 (Type of Bounded Surface Representation) is incorrect (Expected Integer : 0 or 1).\n"
  "!Type 141\n"
  ".XSTEP_123\n"
  "Parameter Data : parameter 2 (Trimming Curves Representation) is incorrect (Integer between 0 and 3 was expected).\n"
  "!Type 141\n"
  ".XSTEP_124\n"
  "Parameter Data : parameter 3 (Untrimmed Surface) is incorrect (Untrimmed Surface entity was expected).\n"
  "!Type 141\n"
  ".XSTEP_125\n"
  "Parameter Data : Not parametric Surface %d (parameter 3).\n"
  "!Type 141\n"
  ".XSTEP_126\n"
  "Parameter Data :  parameter 4 (Number of Curves) is incorrect (Expected positive).\n"
  "!Type 141\n"
  ".XSTEP_127\n"
  "Parameter Data : parameter 5 (Model Space Curve) is incorrect (Curve entity was expected).\n"
  "!Type 141\n"
  ".XSTEP_128\n"
  "Parameter Data (Parameter 6) : Orientation Flag parameter is incorrect (Expected Integer : 1 or 2).\n"
  "!Type 141\n"
  ".XSTEP_129\n"
  "Parameter Data : parameter 7 (Number of Associated Parameter Space Curves) is incorrect (Expected Integer : 0).\n"
  "!Type 141\n"
  ".XSTEP_130\n"
  "Parameter Data : Some pointers in Parameter Space Curve list are null or negative : ignored (Curve Entities were expected).\n"
  "!Type 142\n"
  ".XSTEP_131\n"
  "Parameter Data : parameter 2 (Surface on which the curve lies) is incorrect (Surface entity was expected).\n"
  "!Type 142\n"
  ".XSTEP_132\n"
  "Parameter Data : parameter 3 (Curve 2D) is incorrect (Curve entity was expected).\n"
  "!Type 142\n"
  ".XSTEP_133\n"
  "Parameter Data : parameter 4 (Curve 3D) is incorrect (Curve entity was expected).\n"
  "!Type 142\n"
  ".XSTEP_134\n"
  "Parameter Data : pointers of Curve 2D and 3D are null (parameter 3 and 4) (Curve Entities were expected).\n"
  "!Type 108\n"
  ".XSTEP_135\n"
  "Parameter Data : parameter %d (Coefficient Of Plane) is incorrect (Real was expected).\n"
  "!Type 108\n"
  ".XSTEP_136\n"
  "Parameter Data : parameter 5 (Closed Curve) is incorrect (Curve entity was expected).\n"
  "!Type 108\n"
  ".XSTEP_137\n"
  "Parameter Data  : parameter 5 (Null pointer in Form Number 0 was Expected).\n"
  "!Type 108\n"
  ".XSTEP_138\n"
  "Parameter Data : parameter 9 (Display Symbol Size) is incorrect (Real was expected).\n"
  "!Type 108\n"
  ".XSTEP_139\n"
  "Parameter Data  : parameter %d (Coordinate of Display Symbol) is incorrect (Real was expected).\n"
  "!Type 114\n"
  ".XSTEP_140\n"
  "Parameter Data : parameter 1 (Spline Boundary Type) is incorrect  (Integer between 1 and 6 was expected).\n"
  "!Type 114\n"
  ".XSTEP_141\n"
  "Parameter Data : parameter 3 (Number of U Segments) is incorrect (Expected positive Integer).\n"
  "!Type 114\n"
  ".XSTEP_142\n"
  "Parameter Data : parameter 4 (Number of V Segments) is incorrect (Expected positive Integer).\n"
  "!Type 114\n"
  ".XSTEP_143\n"
  "Parameter Data : not all Breakpoints in U parameters are of Real type.\n"
  "!Type 114\n"
  ".XSTEP_144\n"
  "Parameter Data : not all Breakpoints in V parameters are of Real type.\n"
  "!Type 114\n"
  ".XSTEP_145\n"
  "Parameter Data : not all %s Coefficient of Patch parameter(s) are of Real type.\n"
  "!Type 114\n"
  ".XSTEP_146\n"
  "Parameter Data : parameter %d (Last Z Coefficient of Patch) is  incorrect.\n"
  "!Type 114\n"
  ".XSTEP_147\n"
  "Parameter Data : %s Coefficient of Patch parameters are incorrect (Expected Integer : 16).\n"
  "!Type 118\n"
  ".XSTEP_148\n"
  "Parameter Data : parameter 1 (First Curve) is incorrect.\n"
  "!Type 118\n"
  ".XSTEP_149\n"
  "EParameter Data : parameter 2 (Second Curve) is incorrect.\n"
  "!Type 118\n"
  ".XSTEP_150\n"
  "Parameter Data : parameter 3 (Direction Flag) is incorrect (Integer 0 or 1 was expected).\n"
  "!Type 118\n"
  ".XSTEP_151\n"
  "Parameter Data : parameter 4 (Developable Surface Flag) is incorrect (Integer 0 or 1 was expected).\n"
  "!Type 120\n"
  ".XSTEP_152\n"
  "Parameter Data : parameter 1 (Axis of Revolution) is incorrect.\n"
  "!Type 120\n"
  ".XSTEP_153\n"
  "Parameter Data : parameter 2 (Generatrix entity) is incorrect.\n"
  "!Type 120\n"
  ".XSTEP_154\n"
  "Parameter Data : parameter 3 (Start Angle) is incorrect.\n"
  "!Type 120\n"
  ".XSTEP_155\n"
  "Parameter Data : parameter 4 (Terminate Angle) is incorrect.\n"
  "!Type 122\n"
  ".XSTEP_156\n"
  "Parameter Data : parameter 1 (Generatrix entity) is incorrect.\n"
  "!Type 122\n"
  ".XSTEP_157\n"
  "Parameter Data  : parameter %d (Coordinate of Terminate Point) is incorrect.\n"
  "!Type 128\n"
  ".XSTEP_158\n"
  "Parameter Data : Incorrect Additional value.\n"
  "!Type 128\n"
  ".XSTEP_159\n"
  "Parameter Data : Additional Real value :  ignored.\n"
  "!Type 128\n"
  ".XSTEP_160\n"
  "Parameter Data : Invalid Number in First Knots sequence.\n"
  "!Type 128\n"
  ".XSTEP_161\n"
  "Parameter Data : Invalid Number in Second Knots sequence.\n"
  "!Type 140\n"
  ".XSTEP_162\n"
  "Parameter Data  : parameter %d (Coordinate of Offset Indicator) is incorrect.\n"
  "!Type 140\n"
  ".XSTEP_163\n"
  "Parameter Data : parameter 4 (Offset Distance) is incorrect.\n"
  "!Type 140\n"
  ".XSTEP_164\n"
  "Parameter Data : parameter 5 (Surface entity to be offset) is incorrect.\n"
  "!Type 143\n"
  ".XSTEP_165\n"
  "Parameter Data : parameter 1 (Bounded Surface Representation type) is incorrect (Integer 0 or 1 was expected).\n"
  "!Type 143\n"
  ".XSTEP_166\n"
  "Parameter Data : parameter 2 (Surface entity to be bounded) is incorrect.\n"
  "!Type 143\n"
  ".XSTEP_167\n"
  "Parameter Data : parameter 3 (Number of Boundary entities) is incorrect.\n"
  "!Type 143\n"
  ".XSTEP_168\n"
  "Parameter Data : parameter %d (Boudary entity)  is incorrect.\n"
  "!Type 144\n"
  ".XSTEP_169\n"
  "Parameter Data : parameter 1 (Surface to be trimmed)  is incorrect.\n"
  "!Type 144\n"
  ".XSTEP_170\n"
  "Parameter Data : parameter 2 (Outer Boundary type) is incorrect (Integer 0 or 1 was expected).\n"
  "!Type 144\n"
  ".XSTEP_171\n"
  "Parameter Data : parameter 3 (Number of Inner Boundary Closed Curves) is incorrect (Expected positive Integer).\n"
  "!Type 144\n"
  ".XSTEP_172\n"
  "Parameter Data : parameter 4 (Outer Boundary)  is incorrect (Curve on a Parametric Surface entity, Type 142 was expected).\n"
  "!Type 144\n"
  ".XSTEP_173\n"
  "Parameter Data : parameter %d (Inner Boundary) is incorrect (Curve on a Parametric Surface entity, Type 142 was expected).\n"
  "!Type 190\n"
  ".XSTEP_174\n"
  "Parameter Data : parameter 1 (Point on Surface) is incorrect (Point entity, Type 116 was expected).\n"
  "!Type 190\n"
  ".XSTEP_175\n"
  "Parameter Data : parameter 2 ( Surface Normal Direction) is incorrect (Direction entity was expected).\n"
  "!Type 190\n"
  ".XSTEP_176\n"
  "Parameter Data : parameter 3  (Reference Direction) is incorrect (Direction entity was expected).\n"
  "!Type 190\n"
  ".XSTEP_177\n"
  "Parameter Data : parameter 3 (Null pointer was expected when Form Number field is 1).\n"
  "!Type 186\n"
  ".XSTEP_178\n"
  "Parameter Data : parameter 1 (Shell) is incorrect (Closed Shell entity, Type 514, Form 1 was expected).\n"
  "!Type 186\n"
  ".XSTEP_179\n"
  "Parameter Data : parameter %d (Void Shell) is incorrect (Closed Shell entity, Type 514, Form 1 was expected).\n"
  "!Type 186\n"
  ".XSTEP_180\n"
  "Parameter Data : parameter %d (Orientation Flag) is incorrect (Expected Boolean).\n"
  "!Type 186\n"
  ".XSTEP_181\n"
  "Parameter Data : parameter 3 (Number of Void Shells) is incorrect (Expected positive Integer)\n"
  "!Type 502\n"
  ".XSTEP_182\n"
  "Parameter Data : parameter 1 (Number of Vertex Tuples) is incorrect (Expected positive Integer).\n"
  "!Type 502\n"
  ".XSTEP_183\n"
  "Parameter Data  : parameter %d (Coordinate of Vertex) is incorrect (Real was expected).\n"
  "!Type 504\n"
  ".XSTEP_184\n"
  "Parameter Data : parameter 1 (Number of Edge Tuples) is incorrect (Expected positive Integer).\n"
  "!Type 504\n"
  ".XSTEP_185\n"
  "Parameter Data : parameter 2 (Model Space Curve) is incorrect (Curve entity was expected).\n"
  "!Type 504\n"
  ".XSTEP_186\n"
  "Parameter Data : parameter %d (Start Vertex Index) is incorrect (Expected Integer).\n"
  "!Type 504\n"
  ".XSTEP_187\n"
  "Parameter Data : parameter %d (Terminate Vertex Index) is incorrect (Expected Integer).\n"
  "!Type 504\n"
  ".XSTEP_188\n"
  " Parameter Data : parameter %d (Start Vertex List entity) is incorrect (Vertex List entity, Type 502 was expected).\n"
  "!Type 504\n"
  ".XSTEP_189\n"
  " Parameter Data : parameter %d (Terminate Vertex List entity) is incorrect (Vertex List entity, Type 502 was expected).\n"
  "!Type 508\n"
  ".XSTEP_190\n"
  "Parameter Da ta : parameter %d (Edge Type) is incorrect (Integer 0 or 1 was expected).\n"
  "!Type 508\n"
  ".XSTEP_191\n"
  "Parameter Data : parameter %d (List Index) is incorrect (Expected Integer).\n"
  "!Type 508\n"
  ".XSTEP_192\n"
  "Parameter Data : parameter %d (Number of Parameter Curves) is incorrect (Expected positive Integer).\n"
  "!Type 508\n"
  ".XSTEP_193\n"
  "Parameter Data : parameter %d (Vertex or Edge List entity) is incorrect (Vertex List  or Edge List entity, Type 502 or 504 was expected).\n"
  "!Type 508\n"
  ".XSTEP_194\n"
  "Parameter Data : parameter %d (Parameter Space Curve) is incorrect (Curve entity was expected).\n"
  "!Type 508\n"
  ".XSTEP_195\n"
  "Parameter Data : parameter %d (Isoparametric Flag) is incorrect (Expected Boolean).\n"
  "!Type 510\n"
  ".XSTEP_196\n"
  "Parameter Data : parameter 1 (Surface) is incorrect.\n"
  "!Type 510\n"
  ".XSTEP_197\n"
  "Parameter Data : parameter 2 (Number of Loops) is incorrect (Expected positive Integer).\n"
  "!Type 510\n"
  ".XSTEP_198\n"
  "Parameter Data : parameter 3 (Outer Loop flag) is incorrect (Expected Boolean).\n"
  "!Type 510\n"
  ".XSTEP_199\n"
  "Parameter Data : parameter %d (Loop of the Face) is incorrect (Loop entity, Type 508 was expected).\n"
  "!Type 514\n"
  ".XSTEP_200\n"
  "Parameter Data : parameter 1 (Number of Faces) is incorrect (Expected positive Integer).\n"
  "!Type 514\n"
  ".XSTEP_201\n"
  "Parameter Data : parameter 2 (Face) is incorrect (Face entity, Type 510 was expected).\n"
  "!Type 402, Form 1 or 7\n"
  ".XSTEP_202\n"
  "Form %d : Parameter Data : parameter 1 (Number of Entries) is incorrect (expected positive integer).\n"
  "!Type 402, Form 1 or 7\n"
  ".XSTEP_203\n"
  "Form %d : Parameter Data : some pointers of entity list are null or negative : ignored (Entities were expected).\n"
  "!Type 402\n"
  ".XSTEP_204\n"
  "Form 9 : Parameter Data : parameter 1 (Number of Parent entity) is incorrect  (Expected Integer : 1).\n"
  "!Type 402\n"
  ".XSTEP_205\n"
  "Form 9 : Parameter Data : parameter 2 (Number of Children) is incorrect  (expected positive integer).\n"
  "!Type 402\n"
  ".XSTEP_206\n"
  "Form 9 : Parameter Data : parameter 3 (Parent entity) is incorrect (entity expected).\n"
  "!Type 402\n"
  ".XSTEP_207\n"
  "Form 9 : Parameter Data : some pointers in Child Entity List are null or negative : ignored (Entities were expected).\n"
  "!Type 308\n"
  ".XSTEP_208\n"
  "Parameter Data : parameter 1 (Depth of Subfigure) is incorrect  (Expected Integer).\n"
  "!Type 308\n"
  ".XSTEP_209\n"
  "Parameter Data : parameter 2 (Subfigure Name) is incorrect : %s (Expected String in hollerith Form).\n"
  "!Type 308\n"
  ".XSTEP_210\n"
  "Parameter Data : parameter 3 (Number of Entities) is incorrect  (Expected positive Integer).\n"
  "!Type 308\n"
  ".XSTEP_211\n"
  "Parameter Data : Some pointers of Associated entity List are null or negative : ignored (Entities were expected).\n"
  "!Type 408\n"
  ".XSTEP_212\n"
  "Parameter Data : parameter 1 (Subfigure definition entity) is incorrect (Subfigure definition entity, Type 308 expected).\n"
  "!Type 408\n"
  ".XSTEP_213\n"
  "Parameter Data  : parameter %d (Translation data) is incorrect (Real was expected).\n"
  "!Type 408\n"
  ".XSTEP_214\n"
  "Parameter Data  : parameter 5 (Scale Factor) is incorrect (Real was expected). Default value 1.0 taken.\n"
  "!Type 124\n"
  ".XSTEP_215\n"
  "Parameter Data  : not all parameters are of Real type.\n"
  "!\n"
  "!ADDED MESSAGES\n"
  ".XSTEP_246\n"
  " Parameter Data : parameter 4 (Number of segments) is less than 1.\n"
  "!\n"
  "!\n"
  "! DCE 6/11/98 Add in Load phase\n"
  "!\n"
  ".XSTEP_276\n"
  "Parameter Data : Parameter 1 (Curve creation mode) is invalid (integer expected).\n"
  "!\n"
  ".XSTEP_277\n"
  "Parameter Data : Parameter 5 (Representation preference) is invalid (integer expected).\n"
  "!\n"
  ".XSTEP_278\n"
  "Exception during loading entity %s\n"
  "!\n"
  "!\n"
  "!\n"
  "! ===================================================================\n"
  "!\n"
  "!\n"
  "!\n"
  "! New translation messages ( S3767 )\n"
  "!\n"
  ".IGES_1000\n"
  " Entity %s has not been loaded into memory\n"
  "!\n"
  ".IGES_1001\n"
  " Form %d : Not an implemented entity type : cannot transfer.\n"
  "!\n"
  ".IGES_1005\n"
  " Software error : impossible entity transfer.\n"
  "!\n"
  "!.IGES_1006 same as 1015\n"
  "! exception raising during transfer.\n"
  "!\n"
  ".IGES_1010\n"
  " Resulting TopoDS_Shape has not same 2D and 3D parametrization.\n"
  "!\n"
  ".IGES_1015\n"
  " Software error : transfer interrupted !\n"
  "\n"
  ".IGES_1020\n"
  " Parameter data : pointer %d in associated entity list is null or negative and ignored.\n"
  "!\n"
  ".IGES_1025\n"
  " Transfer error on IGES entity %d : entity skipped.\n"
  "!\n"
  ".IGES_1030\n"
  " Form %d: problems during translation some items in the group.\n"
  "!\n"
  ".IGES_1035\n"
  " Transformation matrix is invalid : not applied.\n"
  "!\n"
  ".IGES_1036\n"
  " Software error : entity skipped.\n"
  "!\n"
  ".IGES_1040\n"
  " Parameter data : pointer %d in entity list is null or has an invalid type and ignored.\n"
  "!\n"
  ".IGES_1045\n"
  " Two consecutives entities are identical (rank %d): only one is transferred.\n"
  "!\n"
  ".IGES_1050\n"
  " %dD curve of rank %d was reversed.\n"
  "!\n"
  ".IGES_1051\n"
  " All %dD curves before rank %d were reversed.\n"
  "!\n"
  ".IGES_1055\n"
  " %dD curves of rank %d were slightly disconnected : repaired.\n"
  "!\n"
  ".IGES_1060\n"
  " %dD curves of rank %d were too disconnected : entity skipped.\n"
  "!\n"
  ".IGES_1061\n"
  " Surface is translated to TopoDS_Shell : entity skipped.\n"
  "!\n"
  ".IGES_1062\n"
  " CurveOnSurface on Composite Surface case not implemented : 3D representation returned.\n"
  "!\n"
  ".IGES_1066\n"
  " Transfer error on surface where curve lies.\n"
  "!\n"
  ".IGES_1070\n"
  " Representations in file are inconsistent : recomputated from %dD.\n"
  "!\n"
  ".IGES_1090\n"
  " Curve was slightly self-intersecting : repaired.\n"
  "!\n"
  ".IGES_1095\n"
  " 3D and 2D curve representations are invalid : entity skipped.\n"
  "!\n"
  ".IGES_1100\n"
  " Parameter data : value of parameter 2 (Offset Distance Flag) is not 1 : case not implemented.\n"
  "!\n"
  ".IGES_1105\n"
  " Ending parameter is beyond end of curve : entity skipped.\n"
  "!\n"
  ".IGES_1110\n"
  " Transfer error on basic curve : entity skipped.\n"
  "!\n"
  ".IGES_1115\n"
  " With C0 continuity can not be splitted into Geom_BSplineCurve C1 lower than Precision::Confusion().\n"
  "!\n"
  ".IGES_1120\n"
  " With C0 continuity was splitted into C1 continuity Geom_BSplineCurve.\n"
  "!\n"
  ".IGES_1125\n"
  " Parameter data : parameter 1 (Type of Bounded Surface Representation = 0) : case not implemented. \n"
  "!\n"
  ".IGES_1130\n"
  " Boundary on Composite Surface : case not implemented.\n"
  "!\n"
  ".IGES_1135\n"
  " %dD curve representation is not defined : computed from %dD curve representation.\n"
  "! 2D curve representation is not defined : computed from 3D curve representation.\n"
  "!\n"
  ".IGES_1140\n"
  " Error during 3D curve transfer : recomputed from 2D.\n"
  "!\n"
  ".IGES_1145\n"
  " Error during %dD curve transfer : recomputed from %dD.\n"
  "! error during 2D curve transfer : recomputed from 3D.\n"
  "!\n"
  ".IGES_1150\n"
  " %s too disconnected :recomputed from %dD.\n"
  "! 2D TopoDS_Wire too disconnected :recomputed from 3D.\n"
  "!\n"
  ".IGES_1155\n"
  " Parameter data : (parameter 1 to 6) coefficients do not satisfy a conic equation.\n"
  "!\n"
  ".IGES_1156\n"
  " %s %s transfer failed : entity skipped.\n"
  "! (type IGES) (DE:Number) transfer failed : entity skipped.\n"
  "!\n"
  ".IGES_1160\n"
  " Parameter data (Parameters 8 to 11) : start and terminate coordinates of arc are the same : entity not trimmed.\n"
  "!\n"
  ".IGES_1165 \n"
  " Transformation is not planar : not applied.\n"
  "!\n"
  ".IGES_1170\n"
  " Polynomial equation is incorrect.\n"
  "!\n"
  ".IGES_1175\n"
  " Error during creation of control points.\n"
  "!\n"
  ".IGES_1180\n"
  " Parameter data : parameter 1 (Spline Type >3) : case not implemented.\n"
  "!\n"
  ".IGES_1190\n"
  " Parameter data : parameter 2 (Degree of basis functions) is lower than 0 or greater than max degree : transfer interrupted.\n"
  "!\n"
  ".IGES_1195\n"
  " Parameter data : incorrect number of control points (2 or more are required).\n"
  "!\n"
  ".IGES_1200\n"
  " %s multiplicity > degree %s (or degree %s + 1 at end) : corrected.\n"
  "!\n"
  ".IGES_1201\n"
  " %s multiplicity > degree %s (or degree %s + 1 at end) : corrected.\n"
  "!\n"
  ".IGES_1210\n"
  " Sum of %s multiplicities is not equal to sum (number of poles + %s degree +1).\n"
  "!\n"
  ".IGES_1215\n"
  " Parameter data : some weight parameters are not of positive real type : entity skipped.\n"
  "!\n"
  ".IGES_1220\n"
  " Rational BSpline %s is in fact polynomial.\n"
  "!\n"
  ".IGES_1221\n"
  " Surface is made periodic.\n"
  "!\n"
  ".IGES_1225\n"
  " Start and terminate points are the same.\n"
  "!\n"
  "! 1230 is the same as 1195\n"
  "!\n"
  ".IGES_1235\n"
  " Curve is too small to be transferred : entity skipped.\n"
  "!\n"
  ".IGES_1240\n"
  " Vector is not for this form : ignored. \n"
  "!\n"
  ".IGES_1250\n"
  " Resulting Geom_Surface is C0-continuous.\n"
  "!\n"
  ".IGES_1255\n"
  " Ruling failed : entity skipped.\n"
  "!\n"
  ".IGES_1265\n"
  " Basis surface is not C0-continuous : offset surface construction impossible.\n"
  "!\n"
  ".IGES_1266\n"
  " Basis surface is C0-continuous and cannot be corrected to C1-continuous.\n"
  "!\n"
  ".IGES_1267\n"
  " Basis surface is C0-continuous but was corrected to C1-continuous.\n"
  "!\n"
  ".IGES_1270\n"
  " Basis surface is C0-continuous and is transferred into a TopoDS_Shell. Only first face was offseted.\n"
  "!\n"
  ".IGES_1275\n"
  " Model Space Representation 0 case not implemented : result is a basis surface.\n"
  "!\n"
  ".IGES_1280\n"
  " Invalid direction : entity skipped.constituent\n"
  "!\n"
  ".IGES_1285\n"
  " Parameter data : pointer %d of child entity list is null or negative : skipped.\n"
  "!\n"
  ".IGES_1295\n"
  " Hole %d and plane are not coplanar.\n"
  "!\n"
  ".IGES_1300\n"
  " Bounding curve is invalid : plane is not trimmed.\n"
  "!\n"
  ".IGES_1305\n"
  " Parameter data : parameter 3 or 4 (number of segments) is less than one.\n"
  "!\n"
  ".IGES_1306\n"
  " Improper type for underlying curve number %d.\n"
  " \n"
  ".IGES_1310\n"
  " Parameter data : parameter 3 or 4 (degree of basis function) is less than one or greater than maximum degree.\n"
  "!\n"
  ".IGES_1325\n"
  " Item %d of EdgeList cannot be represented by single edge (non-continuous or composite curve).\n"
  "!\n"
  ".IGES_1345\n"
  " Parameter data : parameter %d (parameter space curve) is incorrect.\n"
  "!\n"
  ".IGES_1360\n"
  " TopoDS_Shell is not closed.\n"
  "!\n"
  ".IGES_1365\n"
  " Incorrect edge number %d.\n"
  "!\n"
  ".IGES_1370\n"
  " Missing seam-edge was added\n"
  "!\n"
  ".IGES_1371\n"
  " TopoDS_Face was created with natural bounds\n"
  "!\n"
  ".IGES_1372\n"
  " One or more TopoDS_Wire(s) on TopoDS_Face was reversed\n"
  "!\n"
  ".IGES_1373\n"
  " Knots are not in ascending order\n"
  "!\n"
  ".IGES_1374\n"
  " Difference between weights is too big.\n"
  "!\n"
  "!\n"
  "!\n"
  "!\n"
  "! Trace File messages \n"
  ".IGES_2000\n"
  "Diagnostics for IGES file read : %s\n"
  "!\n"
  ".IGES_2005\n"
  "Trace level : %d\n"
  "\n"
  "!\n"
  ".IGES_2010\n"
  "Beginning of IGES file check.\n"
  "!\n"
  ".IGES_2015\n"
  "Number of warnings in check : %d.\n"
  "!\n"
  ".IGES_2020\n"
  "Number of fails in check : %d\n"
  "!\n"
  ".IGES_2025\n"
  "End of file check(Elapsed time : %s).\n"
  "!\n"
  ".IGES_2030\n"
  "Beginning of IGES data translation.\n"
  "!\n"
  ".IGES_2031\n"
  "File has not been loaded.\n"
  "\n"
  "!\n"
  ".IGES_2032\n"
  "IGES entity %d does not exist.\n"
  "\n"
  "!\n"
  ".IGES_2035\n"
  "read.precision.mode : %d\n"
  "!\n"
  ".IGES_2040\n"
  "read.precision.val : %f\n"
  "!\n"
  ".IGES_2045\n"
  "read.iges.bspline.continuity : %d\n"
  "!\n"
  ".IGES_2050\n"
  "read.surfacecurve.mode : %d\n"
  "\n"
  "!\n"
  ".IGES_2055\n"
  "Number of warnings in transfer : %d.\n"
  "!\n"
  ".IGES_2060\n"
  "Number of fails in transfer : %d\n"
  "!\n"
  ".IGES_2065\n"
  "End of IGES data translation (Elapsed time : %s).\n"
  "!\n"
  ".IGES_2070\n"
  "Translating IGES entity DE:%d Type:%d\n"
  "!\n"
  ".IGES_2075\n"
  "\n"
  "%s produced.\n"
  "!\n"
  ".IGES_2076\n"
  "No TopoDS_Shape produced.\n"
  "\n"
  "!Messages for TPSTAT.\n"
  ".IGES_3000\n"
  "********************************************************************************\n"
  ".IGES_3005\n"
  "General statistics for transfer :\n"
  "!\n"
  ".IGES_3010\n"
  "	Number of selected IGES entities  	: %d\n"
  "!\n"
  ".IGES_3011\n"
  "	Number of roots IGES entities  		: %d\n"
  "!\n"
  ".IGES_3015\n"
  "	Number of CasCade resulting Shapes 	: %d\n"
  "!\n"
  ".IGES_3020\n"
  "	Number of warnings		 	: %d\n"
  "!\n"
  ".IGES_3025\n"
  "	Number of fails 		 	: %d\n"
  "!\n"
  ".IGES_3030\n"
  "Count	W/F	Type	Form	Message on IGES entity\n"
  "-----	---	----	----	----------------------\n"
  "!\n"
  ".IGES_3035\n"
  "On IGES entities (DE) :\n"
  "!\n"
  ".IGES_3040\n"
  "Count of CasCade resulting shapes\n"
  "\n"
  "!\n"
  ".IGES_3045\n"
  "\n"
  "Count	CasCade Shapes\n"
  "-----	--------------\n"
  "!\n"
  ".IGES_3050\n"
  "Mapping of all IGES entities\n"
  ".IGES_3055\n"
  "\n"
  "Type	Form	Count	CasCade Shapes\n"
  "----	----	-----	--------------\n"
  "!\n"
  "! Debug messages\n"
  ".IGES_10005\n"
  " Small edge removed\n"
  ".IGES_10010\n"
  " Degenerated edge detected\n"
  ".IGES_10015\n"
  " Lacking edge inserted\n"
  "!\n"
  "!\n"
  ".IGES_10020\n"
  " Null area wire was detected, wire skipped.\n";