0022048: Visualization, AIS_InteractiveContext - single object selection should alway...
[occt.git] / src / XSMessage / XSMessage_XSTEP_us.pxx
CommitLineData
ee5befae 1// This file has been automatically generated from resource file src/XSMessage/XSTEP.us
2
3static const char XSMessage_XSTEP_us[] =
4 "!LOADING PHASE\n"
5 ".XSTEP_1\n"
6 "Beginning of IGES file memory loading.\n"
7 "!\n"
8 ".XSTEP_2\n"
9 "IGES file opening error.\n"
10 "!\n"
11 ".XSTEP_3\n"
12 "Reason : No such file or directory.\n"
13 "!\n"
14 ".XSTEP_4\n"
15 "Reason : Not enough space.\n"
16 "!\n"
17 ".XSTEP_5\n"
18 "Reason : Permission denied.\n"
19 "!\n"
20 ".XSTEP_6\n"
21 "Reason : Too many open files.\n"
22 "!\n"
23 ".XSTEP_7\n"
24 "Reason : No determined.\n"
25 "!\n"
26 ".XSTEP_8\n"
27 "End of loading IGES file to memory (Elapsed time : %s).\n"
28 "\n"
29 "!\n"
30 ".XSTEP_9\n"
31 "Beginning of IGES file reading.\n"
32 "!\n"
33 ".XSTEP_10\n"
34 "End of IGES file reading.\n"
35 "!\n"
36 ".XSTEP_11\n"
37 "Internal error during file header reading. Process continues.\n"
38 "!\n"
39 ".XSTEP_12\n"
40 "Header and content of IGES file are loaded.\n"
41 "!\n"
42 ".XSTEP_13\n"
43 "Internal error during reading of entity %d.\n"
44 "!\n"
45 ".XSTEP_14\n"
46 "Internal error during reading of entity %d (parameter %d).\n"
47 "!\n"
48 ".XSTEP_15\n"
49 "Total number of loaded entities %d.\n"
50 "!\n"
51 ".XSTEP_16\n"
52 "Beginning of model loading.\n"
53 "!\n"
54 ".XSTEP_17\n"
55 "End of model loading.\n"
56 "!\n"
57 ".XSTEP_18\n"
58 "Syntax error in IGES file at line %d in section %s.\n"
59 "!\n"
60 ".XSTEP_19\n"
61 "Syntax error in IGES file at line %d in section %s (line number may be incorrect).\n"
62 "!\n"
63 ".XSTEP_20\n"
64 "There is no Terminate Section, please check end of IGES file. Process continues.\n"
65 "!\n"
66 ".XSTEP_21\n"
67 "Number of ignored Null Entities : %d.\n"
68 "!\n"
69 ".XSTEP_22\n"
70 " Unknown entity %s.\n"
71 "!\n"
72 ".XSTEP_23\n"
73 " Recovered entity %s.\n"
74 "!\n"
75 ".XSTEP_24\n"
76 "Report : %d unknown entities.\n"
77 "!\n"
78 ".XSTEP_25\n"
79 "Number of fails in memory loading : %d.\n"
80 "!\n"
81 ".XSTEP_26\n"
82 "Number of warnings in memory loading : %d.\n"
83 "!\n"
84 ".XSTEP_27\n"
85 " Directory Entry : there is no parameter. Process continues.\n"
86 "!\n"
87 ".XSTEP_28\n"
88 " Directory Entry : parameter 1 (entity type) is incorrect.\n"
89 "!\n"
90 ".XSTEP_29\n"
91 " Directory Entry : Field 4 (Line Font Pattern) is incorrect (Non null pointer or Integer between 0 and 5 was expected).\n"
92 "!\n"
93 ".XSTEP_30\n"
94 " Directory Entry : Field 5 (Level) isincorrect (Not null pointer or not null Integer was expected).\n"
95 "!\n"
96 ".XSTEP_31\n"
97 " Directory Entry : Field 6 (View) is incorrect (Not null pointer or Integer Zero was expected).\n"
98 "!\n"
99 ".XSTEP_32\n"
100 " Directory Entry : Field 7 (Transformation Matrix) is incorrect (Not null pointer or Integer Zero was expected).\n"
101 "!\n"
102 ".XSTEP_33\n"
103 " Directory Entry : Field 8 (Label Display Associativity) is incorrect (Not null pointer or Integer Zero was expected).\n"
104 "!\n"
105 ".XSTEP_34\n"
106 " Directory Entry : Field 13 (Color Number) is incorrect (Not null pointer or Integer between 0 and 8 was expected).\n"
107 "!\n"
108 ".XSTEP_35\n"
109 " Null entity %s.\n"
110 "!\n"
111 ".XSTEP_36\n"
112 " Unknown entity %s.\n"
113 "!\n"
114 ".XSTEP_37\n"
115 " Associativity list is incorrect.\n"
116 "!\n"
117 ".XSTEP_38\n"
118 " Property list is incorrect.\n"
119 "! ANALYSIS PHASE\n"
120 ".XSTEP_39\n"
121 "Global Section : Incorrect number of parameters (%d or %d parameters were expected).\n"
122 "!\n"
123 ".XSTEP_40\n"
124 "Global Section (Parameters 1 and 2) : Parameter Delimiter Character and Record Delimiter Character must not have the same value.\n"
125 "!\n"
126 ".XSTEP_41\n"
127 "Global Section (Parameter 2) : Parameter Delimiter Character is incorrect. Default character comma taken.\n"
128 "!\n"
129 ".XSTEP_42\n"
130 "Global Section (Parameter 2) : Character Record Delimiter parameter is incorrect. Default character Semicolon taken.\n"
131 "!\n"
132 ".XSTEP_43\n"
133 "Global Section (Parameter 8) : Single Precision Magnitude parameter is incorrect (Expected positive Integer). Default value 38 taken.\n"
134 "!\n"
135 ".XSTEP_44\n"
136 "Global Section (Parameter 9) : Single Precision Significance parameter is incorrect (Expected positive Integer). Default value 6 taken.\n"
137 "!\n"
138 ".XSTEP_45\n"
139 "Global Section (Parameter 10) : Double Precision Magnitude parameter is incorrect (Expected positive Integer). Default value 308 taken.\n"
140 "!\n"
141 ".XSTEP_46\n"
142 "Global Section (Parameter 11) : Double Precision Significance parameter is incorrect (Expected positive Integer). Default value 15 taken.\n"
143 "!\n"
144 ".XSTEP_47\n"
145 "Global Section (Parameter 13) : Model Space Scale parameter is incorrect (Expected positive Real). Default value 1.0 taken.\n"
146 "!\n"
147 ".XSTEP_48\n"
148 "Global Section (Parameter 14) : Unit Flag parameter is incorrect (Integer between 1 et 11 was expected). Default value 2 taken : Millimeters.\n"
149 "!\n"
150 ".XSTEP_49\n"
151 "Global Section (Parameter 15): Unit Name parameter is not recognized. Default value 2 taken : Millimeters.srl\n"
152 "!\n"
153 ".XSTEP_50\n"
154 "Global Section (Parameter 15) : Unit Name parameter is undefined : Unit Name ignored.\n"
155 "!\n"
156 ".XSTEP_51\n"
157 "Global Section (Parameter 14 and 15) : Unit Flag parameter does not correspond to Unit Name parameter : Unit Name ignored.\n"
158 "!\n"
159 ".XSTEP_52\n"
160 "Global Section (Parameter 19) : (Expected positive Real). Default value 0.0 taken.\n"
161 "!\n"
162 ".XSTEP_53\n"
163 "Global Section (Parameter 23) : Version Flag parameter is incorrect (Integer between 1 et 11 was expected. Default value 3 taken : Version 2.0.\n"
164 "!\n"
165 ".XSTEP_54\n"
166 "Global Section (Parameter 24) : Drafting Standard Flag parameter is incorrect (Integer between 0 et 7). Default value 3 taken : No standard.Global Section (Parameter 25) : Last change Date parameter was undefined.\n"
167 "!\n"
168 ".XSTEP_55\n"
169 "Global Section (Parameter 25) : Last Change Date parameter is undefined.\n"
170 "!\n"
171 ".XSTEP_56\n"
172 "Global Section (Parameter %d) : Date parameter is undefined.\n"
173 "!\n"
174 ".XSTEP_57\n"
175 "Global Section (Parameter %d) : Incorrect Date Format.\n"
176 "!\n"
177 ".XSTEP_58\n"
178 " Directory Entry (Field 1) : entity type number field is incorrect (Expected Integer : %d).\n"
179 "!\n"
180 ".XSTEP_59\n"
181 " Directory Entry (Field 3) : Structure field is undefined.\n"
182 "!\n"
183 ".XSTEP_60\n"
184 " Directory Entry (Field 4) : Line Font Pattern field is incorrect (Pointer or Integer between 0 and 5 was expected). Default value 0 taken.\n"
185 "!\n"
186 ".XSTEP_61\n"
187 " Directory Entry (Field 5) : Level field is incorrect (Pointer or Integer were expected). Default value 0 taken.\n"
188 "!\n"
189 ".XSTEP_62\n"
190 " Directory Entry (Field 6) : View field is incorrect (Pointer or Zero were expected). Default value 0 taken.\n"
191 "!\n"
192 ".XSTEP_63\n"
193 " Directory Entry (Field 7): Transformation Matrix field is incorrect (Pointer or Zero were expected). Default value 0 taken.\n"
194 "!\n"
195 ".XSTEP_64\n"
196 " Directory Entry (Field 8): Label Display entity field is incorrect (Pointer or Zero were expected). Default value 0 taken.\n"
197 "!\n"
198 ".XSTEP_65\n"
199 " Directory Entry (Field 9) : Blank Status field is incorrect (Expected Integer : 0 or 1). \n"
200 "!\n"
201 ".XSTEP_66\n"
202 " Directory Entry (Field 9) : Subordinate entity Switch field is incorrect (Integer between 0 and 3 was expected). \n"
203 "!\n"
204 ".XSTEP_67\n"
205 " Directory Entry (Field 9) : entity Use Flag is incorrect (Integer between 0 and 6 was expected). \n"
206 "!\n"
207 ".XSTEP_68\n"
208 " Directory Entry (Field 9) : Hierarchy field is incorrect (Integer between 0 and 2 was expected). \n"
209 "!\n"
210 ".XSTEP_69\n"
211 " Directory Entry (Field 12) : Line Weight Number is undefined.\n"
212 "!\n"
213 ".XSTEP_70\n"
214 " Directory Entry (Field 13) : Color Number field is incorrect (Pointer or Integer between 0 and 8 was expected).\n"
215 "!\n"
216 ".XSTEP_71\n"
217 " Directory Entry (Field 15) : Form Number field is incorrect.\n"
218 "!\n"
219 ".XSTEP_72\n"
220 " Directory Entry (Field 19): entity Subscript Number field is incorrect (Integer was expected).\n"
221 "!Type 116\n"
222 ".XSTEP_73\n"
223 "Parameter Data : parameter %d (Coordinate of Point) is incorrect (Real was expected).\n"
224 "!Type 116\n"
225 ".XSTEP_74\n"
226 "Parameter Data : parameter %d (Display Symbol) is incorrect (Subfigure Definition entity, Type 308 was expected).\n"
227 "!Type 100\n"
228 ".XSTEP_75\n"
229 "Parameter Data : parameter 1 (ZT displacement of Arc) is incorrect (Real was expected).\n"
230 "!Type 100\n"
231 ".XSTEP_76\n"
232 "Parameter Data : parameter %d (Arc Center) is incorrect (Real was expected).\n"
233 "!Type 100\n"
234 ".XSTEP_77\n"
235 "Parameter Data : parameter %d (Start Point) is incorrect (Real was expected).\n"
236 "!Type 100\n"
237 ".XSTEP_78\n"
238 "Parameter Data : parameter %d (Terminate Point) is incorrect (Real was expected).\n"
239 "!Type 102\n"
240 ".XSTEP_79\n"
241 "Parameter Data : parameter 1 (Number of Entities) is incorrect : %d (Expected positive Integer).\n"
242 "!Type 102\n"
243 ".XSTEP_80\n"
244 "Parameter Data : Some pointers in entity list are null or negative : ignored (Point, Connect Point or Parameterized Curve Entities were expected).\n"
245 "!Type 104\n"
246 ".XSTEP_81\n"
247 "Parameter Data : parameter %d (Conic Coefficient) is incorrect (Real was expected).\n"
248 "!Type 104\n"
249 ".XSTEP_82\n"
250 "Parameter Data : parameter 7 (Coordinate of Plane) is incorrect (Real was expected).\n"
251 "!Type 104\n"
252 ".XSTEP_83\n"
253 "Parameter Data : parameter %d (Starting Point) is incorrect (Real was expected).\n"
254 "!Type 104\n"
255 ".XSTEP_84\n"
256 "Parameter Data : parameter %d (Terminate Point) is incorrect (Real was expected).\n"
257 "!Type 106\n"
258 ".XSTEP_85\n"
259 "Parameter Data : parameter 1 (Interpretation Flag) is incorrect (Expected Integer : %d).\n"
260 "!Type 106\n"
261 ".XSTEP_86\n"
262 "Parameter Data : parameter 2 (Number of n-tuples) is incorrect (Expected positive Integer).\n"
263 "!Type 106\n"
264 ".XSTEP_87\n"
265 "Parameter Data : parameter 3 (Common Z Displacement) is incorrect (Real was expected).\n"
266 "!Type 106\n"
267 ".XSTEP_88\n"
268 "Parameter Data : not all Data Point parameters are of Real type.\n"
269 "!Type 110\n"
270 ".XSTEP_89\n"
271 "Parameter Data : parameter %d (Starting Point) is incorrect (Real was expected).\n"
272 "!Type 110\n"
273 ".XSTEP_90\n"
274 "Parameter Data : parameter %d (Terminate Point) is incorrect (Real was expected).\n"
275 "!Type 112\n"
276 ".XSTEP_91\n"
277 "Parameter Data : parameter 1 (Spline Type) is incorrect (Integer between 1 and 6 was expected).\n"
278 "!Type 112\n"
279 ".XSTEP_92\n"
280 "Parameter Data (Parameter 2) : parameter 2 (Degree of Continuity) is incorrect (Expected Integer).\n"
281 "!Type 112\n"
282 ".XSTEP_93\n"
283 "Parameter Data : parameter 3 (Number of Dimensions) is incorrect (Expected Integer : 2 or 3).\n"
284 "!Type 112\n"
285 ".XSTEP_94\n"
286 "Parameter Data : parameter 4 (Number of Segments) is incorrect (Expected positive Integer).\n"
287 "!Type 112\n"
288 ".XSTEP_95\n"
289 "Parameter Data : not all Break Point parameters are of Real type.\n"
290 "!Type 112\n"
291 ".XSTEP_96\n"
292 "Parameter Data : entity is planar but parameters BZ, CZ. DZ are not null.\n"
293 "!Type 126\n"
294 ".XSTEP_97\n"
295 "Parameter Data : parameter %d (Upper Index of Sum) is incorrect (Expected positive Integer).\n"
296 "!Type 126\n"
297 ".XSTEP_98\n"
298 "Parameter Data : parameter %d (Degree of Basis Functions) is incorrect (Expected Integer) : Default value 0 taken.\n"
299 "!Type 126\n"
300 ".XSTEP_99\n"
301 "Parameter Data : parameter %d (Planar/Non Planar Flag) is incorrect (Expected Boolean).\n"
302 "!Type 126\n"
303 ".XSTEP_100\n"
304 "Parameter Data : parameter %d (Open/Closed Flag) is incorrect (Expected Boolean).\n"
305 "!Type 126\n"
306 ".XSTEP_101\n"
307 "Parameter Data : parameter %d (Rational/Polynomial Flag) is incorrect (Expected Boolean).\n"
308 "!Type 126\n"
309 ".XSTEP_102\n"
310 "Parameter Data : parameter %d (NonPeriodic/Periodic Flag) is incorrect (Expected Boolean).\n"
311 "!Type 126\n"
312 ".XSTEP_103\n"
313 "Parameter Data : not all Knot Sequence parameters are of Real type.\n"
314 "!Type 126\n"
315 ".XSTEP_104\n"
316 "Parameter Data : not all Weight parameters are of positive Real type.\n"
317 "!Type 126\n"
318 ".XSTEP_105\n"
319 "Parameter Data : parameter %d (Control Point) is incorrect (Real was expected).\n"
320 "!Type 126\n"
321 ".XSTEP_106\n"
322 "Parameter Data : parameter %d (Starting Value) is incorrect (Real was expected).\n"
323 "!Type 126\n"
324 ".XSTEP_107\n"
325 "Parameter Data : parameter %d (Ending Value) is incorrect (Real was expected).\n"
326 "!Type 126\n"
327 ".XSTEP_108\n"
328 "Parameter Data : parameter %d (Unit Normal) is incorrect (Real was expected).\n"
329 "!Type 126\n"
330 ".XSTEP_109\n"
331 "Parameter Data : parameter %d (Unit Normal) is undefined for a planar curve.\n"
332 "!Type 130\n"
333 ".XSTEP_110\n"
334 "Parameter Data : parameter 1 (Curve entity to be offset) is incorrect (Curve entity was expected).\n"
335 "!Type 130\n"
336 ".XSTEP_111\n"
337 "Parameter Data : parameter 2 (Offset Distance Flag) is incorrect (Integer between 1 and 3 was expected).\n"
338 "!Type 130\n"
339 ".XSTEP_112\n"
340 "Parameter Data : parameter 3 (Curve entity whose coordinate describes offset) is incorrect (Curve entity was expected).\n"
341 "!Type 130\n"
342 ".XSTEP_113\n"
343 "Parameter Data : parameter 4 (Particular Coordinate) is incorrect (Expected Integer).\n"
344 "!Type 130\n"
345 ".XSTEP_114\n"
346 "Parameter Data : parameter 5 (Tapered Offset Type Flag) is incorrect (Expected Integer).\n"
347 "!Type 130\n"
348 ".XSTEP_115\n"
349 "Parameter Data : parameter 6 (First Offset distance) is incorrect (Real was expected).\n"
350 "!Type 130\n"
351 ".XSTEP_116\n"
352 "Parameter Data : parameter 7 (Arc Length of First Offset Distance) is incorrect (Real was expected).\n"
353 "!Type 130\n"
354 ".XSTEP_117\n"
355 "Parameter Data : parameter 8 (Second Offset Distance) is incorrect (Real was expected).\n"
356 "!Type 130\n"
357 ".XSTEP_118\n"
358 "Parameter Data : parameter 9 (Arc Length of Second Offset Distance) is incorrect (Real was expected).\n"
359 "!Type 130\n"
360 ".XSTEP_119\n"
361 "Parameter Data : parameter 13 (Offset Curve Starting Parameter Value) is incorrect (Real was expected).\n"
362 "!Type 130\n"
363 ".XSTEP_120\n"
364 "Parameter Data : parameter 14 (Offset Curve Ending Parameter Value) is incorrect (Real was expected).\n"
365 "!Type 130\n"
366 ".XSTEP_121\n"
367 "Parameter Data : parameter %d (Unit Vector Normal to plane) is incorrect (Real was expected).\n"
368 "!Type 141\n"
369 ".XSTEP_122\n"
370 "Parameter Data : parameter 1 (Type of Bounded Surface Representation) is incorrect (Expected Integer : 0 or 1).\n"
371 "!Type 141\n"
372 ".XSTEP_123\n"
373 "Parameter Data : parameter 2 (Trimming Curves Representation) is incorrect (Integer between 0 and 3 was expected).\n"
374 "!Type 141\n"
375 ".XSTEP_124\n"
376 "Parameter Data : parameter 3 (Untrimmed Surface) is incorrect (Untrimmed Surface entity was expected).\n"
377 "!Type 141\n"
378 ".XSTEP_125\n"
379 "Parameter Data : Not parametric Surface %d (parameter 3).\n"
380 "!Type 141\n"
381 ".XSTEP_126\n"
382 "Parameter Data : parameter 4 (Number of Curves) is incorrect (Expected positive).\n"
383 "!Type 141\n"
384 ".XSTEP_127\n"
385 "Parameter Data : parameter 5 (Model Space Curve) is incorrect (Curve entity was expected).\n"
386 "!Type 141\n"
387 ".XSTEP_128\n"
388 "Parameter Data (Parameter 6) : Orientation Flag parameter is incorrect (Expected Integer : 1 or 2).\n"
389 "!Type 141\n"
390 ".XSTEP_129\n"
391 "Parameter Data : parameter 7 (Number of Associated Parameter Space Curves) is incorrect (Expected Integer : 0).\n"
392 "!Type 141\n"
393 ".XSTEP_130\n"
394 "Parameter Data : Some pointers in Parameter Space Curve list are null or negative : ignored (Curve Entities were expected).\n"
395 "!Type 142\n"
396 ".XSTEP_131\n"
397 "Parameter Data : parameter 2 (Surface on which the curve lies) is incorrect (Surface entity was expected).\n"
398 "!Type 142\n"
399 ".XSTEP_132\n"
400 "Parameter Data : parameter 3 (Curve 2D) is incorrect (Curve entity was expected).\n"
401 "!Type 142\n"
402 ".XSTEP_133\n"
403 "Parameter Data : parameter 4 (Curve 3D) is incorrect (Curve entity was expected).\n"
404 "!Type 142\n"
405 ".XSTEP_134\n"
406 "Parameter Data : pointers of Curve 2D and 3D are null (parameter 3 and 4) (Curve Entities were expected).\n"
407 "!Type 108\n"
408 ".XSTEP_135\n"
409 "Parameter Data : parameter %d (Coefficient Of Plane) is incorrect (Real was expected).\n"
410 "!Type 108\n"
411 ".XSTEP_136\n"
412 "Parameter Data : parameter 5 (Closed Curve) is incorrect (Curve entity was expected).\n"
413 "!Type 108\n"
414 ".XSTEP_137\n"
415 "Parameter Data : parameter 5 (Null pointer in Form Number 0 was Expected).\n"
416 "!Type 108\n"
417 ".XSTEP_138\n"
418 "Parameter Data : parameter 9 (Display Symbol Size) is incorrect (Real was expected).\n"
419 "!Type 108\n"
420 ".XSTEP_139\n"
421 "Parameter Data : parameter %d (Coordinate of Display Symbol) is incorrect (Real was expected).\n"
422 "!Type 114\n"
423 ".XSTEP_140\n"
424 "Parameter Data : parameter 1 (Spline Boundary Type) is incorrect (Integer between 1 and 6 was expected).\n"
425 "!Type 114\n"
426 ".XSTEP_141\n"
427 "Parameter Data : parameter 3 (Number of U Segments) is incorrect (Expected positive Integer).\n"
428 "!Type 114\n"
429 ".XSTEP_142\n"
430 "Parameter Data : parameter 4 (Number of V Segments) is incorrect (Expected positive Integer).\n"
431 "!Type 114\n"
432 ".XSTEP_143\n"
433 "Parameter Data : not all Breakpoints in U parameters are of Real type.\n"
434 "!Type 114\n"
435 ".XSTEP_144\n"
436 "Parameter Data : not all Breakpoints in V parameters are of Real type.\n"
437 "!Type 114\n"
438 ".XSTEP_145\n"
439 "Parameter Data : not all %s Coefficient of Patch parameter(s) are of Real type.\n"
440 "!Type 114\n"
441 ".XSTEP_146\n"
442 "Parameter Data : parameter %d (Last Z Coefficient of Patch) is incorrect.\n"
443 "!Type 114\n"
444 ".XSTEP_147\n"
445 "Parameter Data : %s Coefficient of Patch parameters are incorrect (Expected Integer : 16).\n"
446 "!Type 118\n"
447 ".XSTEP_148\n"
448 "Parameter Data : parameter 1 (First Curve) is incorrect.\n"
449 "!Type 118\n"
450 ".XSTEP_149\n"
451 "EParameter Data : parameter 2 (Second Curve) is incorrect.\n"
452 "!Type 118\n"
453 ".XSTEP_150\n"
454 "Parameter Data : parameter 3 (Direction Flag) is incorrect (Integer 0 or 1 was expected).\n"
455 "!Type 118\n"
456 ".XSTEP_151\n"
457 "Parameter Data : parameter 4 (Developable Surface Flag) is incorrect (Integer 0 or 1 was expected).\n"
458 "!Type 120\n"
459 ".XSTEP_152\n"
460 "Parameter Data : parameter 1 (Axis of Revolution) is incorrect.\n"
461 "!Type 120\n"
462 ".XSTEP_153\n"
463 "Parameter Data : parameter 2 (Generatrix entity) is incorrect.\n"
464 "!Type 120\n"
465 ".XSTEP_154\n"
466 "Parameter Data : parameter 3 (Start Angle) is incorrect.\n"
467 "!Type 120\n"
468 ".XSTEP_155\n"
469 "Parameter Data : parameter 4 (Terminate Angle) is incorrect.\n"
470 "!Type 122\n"
471 ".XSTEP_156\n"
472 "Parameter Data : parameter 1 (Generatrix entity) is incorrect.\n"
473 "!Type 122\n"
474 ".XSTEP_157\n"
475 "Parameter Data : parameter %d (Coordinate of Terminate Point) is incorrect.\n"
476 "!Type 128\n"
477 ".XSTEP_158\n"
478 "Parameter Data : Incorrect Additional value.\n"
479 "!Type 128\n"
480 ".XSTEP_159\n"
481 "Parameter Data : Additional Real value : ignored.\n"
482 "!Type 128\n"
483 ".XSTEP_160\n"
484 "Parameter Data : Invalid Number in First Knots sequence.\n"
485 "!Type 128\n"
486 ".XSTEP_161\n"
487 "Parameter Data : Invalid Number in Second Knots sequence.\n"
488 "!Type 140\n"
489 ".XSTEP_162\n"
490 "Parameter Data : parameter %d (Coordinate of Offset Indicator) is incorrect.\n"
491 "!Type 140\n"
492 ".XSTEP_163\n"
493 "Parameter Data : parameter 4 (Offset Distance) is incorrect.\n"
494 "!Type 140\n"
495 ".XSTEP_164\n"
496 "Parameter Data : parameter 5 (Surface entity to be offset) is incorrect.\n"
497 "!Type 143\n"
498 ".XSTEP_165\n"
499 "Parameter Data : parameter 1 (Bounded Surface Representation type) is incorrect (Integer 0 or 1 was expected).\n"
500 "!Type 143\n"
501 ".XSTEP_166\n"
502 "Parameter Data : parameter 2 (Surface entity to be bounded) is incorrect.\n"
503 "!Type 143\n"
504 ".XSTEP_167\n"
505 "Parameter Data : parameter 3 (Number of Boundary entities) is incorrect.\n"
506 "!Type 143\n"
507 ".XSTEP_168\n"
508 "Parameter Data : parameter %d (Boudary entity) is incorrect.\n"
509 "!Type 144\n"
510 ".XSTEP_169\n"
511 "Parameter Data : parameter 1 (Surface to be trimmed) is incorrect.\n"
512 "!Type 144\n"
513 ".XSTEP_170\n"
514 "Parameter Data : parameter 2 (Outer Boundary type) is incorrect (Integer 0 or 1 was expected).\n"
515 "!Type 144\n"
516 ".XSTEP_171\n"
517 "Parameter Data : parameter 3 (Number of Inner Boundary Closed Curves) is incorrect (Expected positive Integer).\n"
518 "!Type 144\n"
519 ".XSTEP_172\n"
520 "Parameter Data : parameter 4 (Outer Boundary) is incorrect (Curve on a Parametric Surface entity, Type 142 was expected).\n"
521 "!Type 144\n"
522 ".XSTEP_173\n"
523 "Parameter Data : parameter %d (Inner Boundary) is incorrect (Curve on a Parametric Surface entity, Type 142 was expected).\n"
524 "!Type 190\n"
525 ".XSTEP_174\n"
526 "Parameter Data : parameter 1 (Point on Surface) is incorrect (Point entity, Type 116 was expected).\n"
527 "!Type 190\n"
528 ".XSTEP_175\n"
529 "Parameter Data : parameter 2 ( Surface Normal Direction) is incorrect (Direction entity was expected).\n"
530 "!Type 190\n"
531 ".XSTEP_176\n"
532 "Parameter Data : parameter 3 (Reference Direction) is incorrect (Direction entity was expected).\n"
533 "!Type 190\n"
534 ".XSTEP_177\n"
535 "Parameter Data : parameter 3 (Null pointer was expected when Form Number field is 1).\n"
536 "!Type 186\n"
537 ".XSTEP_178\n"
538 "Parameter Data : parameter 1 (Shell) is incorrect (Closed Shell entity, Type 514, Form 1 was expected).\n"
539 "!Type 186\n"
540 ".XSTEP_179\n"
541 "Parameter Data : parameter %d (Void Shell) is incorrect (Closed Shell entity, Type 514, Form 1 was expected).\n"
542 "!Type 186\n"
543 ".XSTEP_180\n"
544 "Parameter Data : parameter %d (Orientation Flag) is incorrect (Expected Boolean).\n"
545 "!Type 186\n"
546 ".XSTEP_181\n"
547 "Parameter Data : parameter 3 (Number of Void Shells) is incorrect (Expected positive Integer)\n"
548 "!Type 502\n"
549 ".XSTEP_182\n"
550 "Parameter Data : parameter 1 (Number of Vertex Tuples) is incorrect (Expected positive Integer).\n"
551 "!Type 502\n"
552 ".XSTEP_183\n"
553 "Parameter Data : parameter %d (Coordinate of Vertex) is incorrect (Real was expected).\n"
554 "!Type 504\n"
555 ".XSTEP_184\n"
556 "Parameter Data : parameter 1 (Number of Edge Tuples) is incorrect (Expected positive Integer).\n"
557 "!Type 504\n"
558 ".XSTEP_185\n"
559 "Parameter Data : parameter 2 (Model Space Curve) is incorrect (Curve entity was expected).\n"
560 "!Type 504\n"
561 ".XSTEP_186\n"
562 "Parameter Data : parameter %d (Start Vertex Index) is incorrect (Expected Integer).\n"
563 "!Type 504\n"
564 ".XSTEP_187\n"
565 "Parameter Data : parameter %d (Terminate Vertex Index) is incorrect (Expected Integer).\n"
566 "!Type 504\n"
567 ".XSTEP_188\n"
568 " Parameter Data : parameter %d (Start Vertex List entity) is incorrect (Vertex List entity, Type 502 was expected).\n"
569 "!Type 504\n"
570 ".XSTEP_189\n"
571 " Parameter Data : parameter %d (Terminate Vertex List entity) is incorrect (Vertex List entity, Type 502 was expected).\n"
572 "!Type 508\n"
573 ".XSTEP_190\n"
574 "Parameter Da ta : parameter %d (Edge Type) is incorrect (Integer 0 or 1 was expected).\n"
575 "!Type 508\n"
576 ".XSTEP_191\n"
577 "Parameter Data : parameter %d (List Index) is incorrect (Expected Integer).\n"
578 "!Type 508\n"
579 ".XSTEP_192\n"
580 "Parameter Data : parameter %d (Number of Parameter Curves) is incorrect (Expected positive Integer).\n"
581 "!Type 508\n"
582 ".XSTEP_193\n"
583 "Parameter Data : parameter %d (Vertex or Edge List entity) is incorrect (Vertex List or Edge List entity, Type 502 or 504 was expected).\n"
584 "!Type 508\n"
585 ".XSTEP_194\n"
586 "Parameter Data : parameter %d (Parameter Space Curve) is incorrect (Curve entity was expected).\n"
587 "!Type 508\n"
588 ".XSTEP_195\n"
589 "Parameter Data : parameter %d (Isoparametric Flag) is incorrect (Expected Boolean).\n"
590 "!Type 510\n"
591 ".XSTEP_196\n"
592 "Parameter Data : parameter 1 (Surface) is incorrect.\n"
593 "!Type 510\n"
594 ".XSTEP_197\n"
595 "Parameter Data : parameter 2 (Number of Loops) is incorrect (Expected positive Integer).\n"
596 "!Type 510\n"
597 ".XSTEP_198\n"
598 "Parameter Data : parameter 3 (Outer Loop flag) is incorrect (Expected Boolean).\n"
599 "!Type 510\n"
600 ".XSTEP_199\n"
601 "Parameter Data : parameter %d (Loop of the Face) is incorrect (Loop entity, Type 508 was expected).\n"
602 "!Type 514\n"
603 ".XSTEP_200\n"
604 "Parameter Data : parameter 1 (Number of Faces) is incorrect (Expected positive Integer).\n"
605 "!Type 514\n"
606 ".XSTEP_201\n"
607 "Parameter Data : parameter 2 (Face) is incorrect (Face entity, Type 510 was expected).\n"
608 "!Type 402, Form 1 or 7\n"
609 ".XSTEP_202\n"
610 "Form %d : Parameter Data : parameter 1 (Number of Entries) is incorrect (expected positive integer).\n"
611 "!Type 402, Form 1 or 7\n"
612 ".XSTEP_203\n"
613 "Form %d : Parameter Data : some pointers of entity list are null or negative : ignored (Entities were expected).\n"
614 "!Type 402\n"
615 ".XSTEP_204\n"
616 "Form 9 : Parameter Data : parameter 1 (Number of Parent entity) is incorrect (Expected Integer : 1).\n"
617 "!Type 402\n"
618 ".XSTEP_205\n"
619 "Form 9 : Parameter Data : parameter 2 (Number of Children) is incorrect (expected positive integer).\n"
620 "!Type 402\n"
621 ".XSTEP_206\n"
622 "Form 9 : Parameter Data : parameter 3 (Parent entity) is incorrect (entity expected).\n"
623 "!Type 402\n"
624 ".XSTEP_207\n"
625 "Form 9 : Parameter Data : some pointers in Child Entity List are null or negative : ignored (Entities were expected).\n"
626 "!Type 308\n"
627 ".XSTEP_208\n"
628 "Parameter Data : parameter 1 (Depth of Subfigure) is incorrect (Expected Integer).\n"
629 "!Type 308\n"
630 ".XSTEP_209\n"
631 "Parameter Data : parameter 2 (Subfigure Name) is incorrect : %s (Expected String in hollerith Form).\n"
632 "!Type 308\n"
633 ".XSTEP_210\n"
634 "Parameter Data : parameter 3 (Number of Entities) is incorrect (Expected positive Integer).\n"
635 "!Type 308\n"
636 ".XSTEP_211\n"
637 "Parameter Data : Some pointers of Associated entity List are null or negative : ignored (Entities were expected).\n"
638 "!Type 408\n"
639 ".XSTEP_212\n"
640 "Parameter Data : parameter 1 (Subfigure definition entity) is incorrect (Subfigure definition entity, Type 308 expected).\n"
641 "!Type 408\n"
642 ".XSTEP_213\n"
643 "Parameter Data : parameter %d (Translation data) is incorrect (Real was expected).\n"
644 "!Type 408\n"
645 ".XSTEP_214\n"
646 "Parameter Data : parameter 5 (Scale Factor) is incorrect (Real was expected). Default value 1.0 taken.\n"
647 "!Type 124\n"
648 ".XSTEP_215\n"
649 "Parameter Data : not all parameters are of Real type.\n"
650 "!\n"
651 "!ADDED MESSAGES\n"
652 ".XSTEP_246\n"
653 " Parameter Data : parameter 4 (Number of segments) is less than 1.\n"
654 "!\n"
655 "!\n"
656 "! DCE 6/11/98 Add in Load phase\n"
657 "!\n"
658 ".XSTEP_276\n"
659 "Parameter Data : Parameter 1 (Curve creation mode) is invalid (integer expected).\n"
660 "!\n"
661 ".XSTEP_277\n"
662 "Parameter Data : Parameter 5 (Representation preference) is invalid (integer expected).\n"
663 "!\n"
664 ".XSTEP_278\n"
665 "Exception during loading entity %s\n"
666 "!\n"
667 "!\n"
668 "!\n"
669 "! ===================================================================\n"
670 "!\n"
671 "!\n"
672 "!\n"
673 "! New translation messages ( S3767 )\n"
674 "!\n"
675 ".IGES_1000\n"
676 " Entity %s has not been loaded into memory\n"
677 "!\n"
678 ".IGES_1001\n"
679 " Form %d : Not an implemented entity type : cannot transfer.\n"
680 "!\n"
681 ".IGES_1005\n"
682 " Software error : impossible entity transfer.\n"
683 "!\n"
684 "!.IGES_1006 same as 1015\n"
685 "! exception raising during transfer.\n"
686 "!\n"
687 ".IGES_1010\n"
688 " Resulting TopoDS_Shape has not same 2D and 3D parametrization.\n"
689 "!\n"
690 ".IGES_1015\n"
691 " Software error : transfer interrupted !\n"
692 "\n"
693 ".IGES_1020\n"
694 " Parameter data : pointer %d in associated entity list is null or negative and ignored.\n"
695 "!\n"
696 ".IGES_1025\n"
697 " Transfer error on IGES entity %d : entity skipped.\n"
698 "!\n"
699 ".IGES_1030\n"
700 " Form %d: problems during translation some items in the group.\n"
701 "!\n"
702 ".IGES_1035\n"
703 " Transformation matrix is invalid : not applied.\n"
704 "!\n"
705 ".IGES_1036\n"
706 " Software error : entity skipped.\n"
707 "!\n"
708 ".IGES_1040\n"
709 " Parameter data : pointer %d in entity list is null or has an invalid type and ignored.\n"
710 "!\n"
711 ".IGES_1045\n"
712 " Two consecutives entities are identical (rank %d): only one is transferred.\n"
713 "!\n"
714 ".IGES_1050\n"
715 " %dD curve of rank %d was reversed.\n"
716 "!\n"
717 ".IGES_1051\n"
718 " All %dD curves before rank %d were reversed.\n"
719 "!\n"
720 ".IGES_1055\n"
721 " %dD curves of rank %d were slightly disconnected : repaired.\n"
722 "!\n"
723 ".IGES_1060\n"
724 " %dD curves of rank %d were too disconnected : entity skipped.\n"
725 "!\n"
726 ".IGES_1061\n"
727 " Surface is translated to TopoDS_Shell : entity skipped.\n"
728 "!\n"
729 ".IGES_1062\n"
730 " CurveOnSurface on Composite Surface case not implemented : 3D representation returned.\n"
731 "!\n"
732 ".IGES_1066\n"
733 " Transfer error on surface where curve lies.\n"
734 "!\n"
735 ".IGES_1070\n"
736 " Representations in file are inconsistent : recomputated from %dD.\n"
737 "!\n"
738 ".IGES_1090\n"
739 " Curve was slightly self-intersecting : repaired.\n"
740 "!\n"
741 ".IGES_1095\n"
742 " 3D and 2D curve representations are invalid : entity skipped.\n"
743 "!\n"
744 ".IGES_1100\n"
745 " Parameter data : value of parameter 2 (Offset Distance Flag) is not 1 : case not implemented.\n"
746 "!\n"
747 ".IGES_1105\n"
748 " Ending parameter is beyond end of curve : entity skipped.\n"
749 "!\n"
750 ".IGES_1110\n"
751 " Transfer error on basic curve : entity skipped.\n"
752 "!\n"
753 ".IGES_1115\n"
754 " With C0 continuity can not be splitted into Geom_BSplineCurve C1 lower than Precision::Confusion().\n"
755 "!\n"
756 ".IGES_1120\n"
757 " With C0 continuity was splitted into C1 continuity Geom_BSplineCurve.\n"
758 "!\n"
759 ".IGES_1125\n"
760 " Parameter data : parameter 1 (Type of Bounded Surface Representation = 0) : case not implemented. \n"
761 "!\n"
762 ".IGES_1130\n"
763 " Boundary on Composite Surface : case not implemented.\n"
764 "!\n"
765 ".IGES_1135\n"
766 " %dD curve representation is not defined : computed from %dD curve representation.\n"
767 "! 2D curve representation is not defined : computed from 3D curve representation.\n"
768 "!\n"
769 ".IGES_1140\n"
770 " Error during 3D curve transfer : recomputed from 2D.\n"
771 "!\n"
772 ".IGES_1145\n"
773 " Error during %dD curve transfer : recomputed from %dD.\n"
774 "! error during 2D curve transfer : recomputed from 3D.\n"
775 "!\n"
776 ".IGES_1150\n"
777 " %s too disconnected :recomputed from %dD.\n"
778 "! 2D TopoDS_Wire too disconnected :recomputed from 3D.\n"
779 "!\n"
780 ".IGES_1155\n"
781 " Parameter data : (parameter 1 to 6) coefficients do not satisfy a conic equation.\n"
782 "!\n"
783 ".IGES_1156\n"
784 " %s %s transfer failed : entity skipped.\n"
785 "! (type IGES) (DE:Number) transfer failed : entity skipped.\n"
786 "!\n"
787 ".IGES_1160\n"
788 " Parameter data (Parameters 8 to 11) : start and terminate coordinates of arc are the same : entity not trimmed.\n"
789 "!\n"
790 ".IGES_1165 \n"
791 " Transformation is not planar : not applied.\n"
792 "!\n"
793 ".IGES_1170\n"
794 " Polynomial equation is incorrect.\n"
795 "!\n"
796 ".IGES_1175\n"
797 " Error during creation of control points.\n"
798 "!\n"
799 ".IGES_1180\n"
800 " Parameter data : parameter 1 (Spline Type >3) : case not implemented.\n"
801 "!\n"
802 ".IGES_1190\n"
803 " Parameter data : parameter 2 (Degree of basis functions) is lower than 0 or greater than max degree : transfer interrupted.\n"
804 "!\n"
805 ".IGES_1195\n"
806 " Parameter data : incorrect number of control points (2 or more are required).\n"
807 "!\n"
808 ".IGES_1200\n"
809 " %s multiplicity > degree %s (or degree %s + 1 at end) : corrected.\n"
810 "!\n"
811 ".IGES_1201\n"
812 " %s multiplicity > degree %s (or degree %s + 1 at end) : corrected.\n"
813 "!\n"
814 ".IGES_1210\n"
815 " Sum of %s multiplicities is not equal to sum (number of poles + %s degree +1).\n"
816 "!\n"
817 ".IGES_1215\n"
818 " Parameter data : some weight parameters are not of positive real type : entity skipped.\n"
819 "!\n"
820 ".IGES_1220\n"
821 " Rational BSpline %s is in fact polynomial.\n"
822 "!\n"
823 ".IGES_1221\n"
824 " Surface is made periodic.\n"
825 "!\n"
826 ".IGES_1225\n"
827 " Start and terminate points are the same.\n"
828 "!\n"
829 "! 1230 is the same as 1195\n"
830 "!\n"
831 ".IGES_1235\n"
832 " Curve is too small to be transferred : entity skipped.\n"
833 "!\n"
834 ".IGES_1240\n"
835 " Vector is not for this form : ignored. \n"
836 "!\n"
837 ".IGES_1250\n"
838 " Resulting Geom_Surface is C0-continuous.\n"
839 "!\n"
840 ".IGES_1255\n"
841 " Ruling failed : entity skipped.\n"
842 "!\n"
843 ".IGES_1265\n"
844 " Basis surface is not C0-continuous : offset surface construction impossible.\n"
845 "!\n"
846 ".IGES_1266\n"
847 " Basis surface is C0-continuous and cannot be corrected to C1-continuous.\n"
848 "!\n"
849 ".IGES_1267\n"
850 " Basis surface is C0-continuous but was corrected to C1-continuous.\n"
851 "!\n"
852 ".IGES_1270\n"
853 " Basis surface is C0-continuous and is transferred into a TopoDS_Shell. Only first face was offseted.\n"
854 "!\n"
855 ".IGES_1275\n"
856 " Model Space Representation 0 case not implemented : result is a basis surface.\n"
857 "!\n"
858 ".IGES_1280\n"
859 " Invalid direction : entity skipped.constituent\n"
860 "!\n"
861 ".IGES_1285\n"
862 " Parameter data : pointer %d of child entity list is null or negative : skipped.\n"
863 "!\n"
864 ".IGES_1295\n"
865 " Hole %d and plane are not coplanar.\n"
866 "!\n"
867 ".IGES_1300\n"
868 " Bounding curve is invalid : plane is not trimmed.\n"
869 "!\n"
870 ".IGES_1305\n"
871 " Parameter data : parameter 3 or 4 (number of segments) is less than one.\n"
872 "!\n"
873 ".IGES_1306\n"
874 " Improper type for underlying curve number %d.\n"
875 " \n"
876 ".IGES_1310\n"
877 " Parameter data : parameter 3 or 4 (degree of basis function) is less than one or greater than maximum degree.\n"
878 "!\n"
879 ".IGES_1325\n"
880 " Resulting geometry not C0-continuous : TopoDS_Edge %d cannot be constructed.\n"
881 "!\n"
882 ".IGES_1345\n"
883 " Parameter data : parameter %d (parameter space curve) is incorrect.\n"
884 "!\n"
885 ".IGES_1360\n"
886 " TopoDS_Shell is not closed.\n"
887 "!\n"
888 ".IGES_1365\n"
889 " Incorrect edge number %d.\n"
890 "!\n"
891 ".IGES_1370\n"
892 " Missing seam-edge was added\n"
893 "!\n"
894 ".IGES_1371\n"
895 " TopoDS_Face was created with natural bounds\n"
896 "!\n"
897 ".IGES_1372\n"
898 " One or more TopoDS_Wire(s) on TopoDS_Face was reversed\n"
899 "!\n"
900 ".IGES_1373\n"
901 " Knots are not in ascending order\n"
902 "!\n"
903 ".IGES_1374\n"
904 " Difference between weights is too big.\n"
905 "!\n"
906 "!\n"
907 "!\n"
908 "!\n"
909 "! Trace File messages \n"
910 ".IGES_2000\n"
911 "Diagnostics for IGES file read : %s\n"
912 "!\n"
913 ".IGES_2005\n"
914 "Trace level : %d\n"
915 "\n"
916 "!\n"
917 ".IGES_2010\n"
918 "Beginning of IGES file check.\n"
919 "!\n"
920 ".IGES_2015\n"
921 "Number of warnings in check : %d.\n"
922 "!\n"
923 ".IGES_2020\n"
924 "Number of fails in check : %d\n"
925 "!\n"
926 ".IGES_2025\n"
927 "End of file check(Elapsed time : %s).\n"
928 "!\n"
929 ".IGES_2030\n"
930 "Beginning of IGES data translation.\n"
931 "!\n"
932 ".IGES_2031\n"
933 "File has not been loaded.\n"
934 "\n"
935 "!\n"
936 ".IGES_2032\n"
937 "IGES entity %d does not exist.\n"
938 "\n"
939 "!\n"
940 ".IGES_2035\n"
941 "read.precision.mode : %d\n"
942 "!\n"
943 ".IGES_2040\n"
944 "read.precision.val : %f\n"
945 "!\n"
946 ".IGES_2045\n"
947 "read.iges.bspline.continuity : %d\n"
948 "!\n"
949 ".IGES_2050\n"
950 "read.surfacecurve.mode : %d\n"
951 "\n"
952 "!\n"
953 ".IGES_2055\n"
954 "Number of warnings in transfer : %d.\n"
955 "!\n"
956 ".IGES_2060\n"
957 "Number of fails in transfer : %d\n"
958 "!\n"
959 ".IGES_2065\n"
960 "End of IGES data translation (Elapsed time : %s).\n"
961 "!\n"
962 ".IGES_2070\n"
963 "Translating IGES entity DE:%d Type:%d\n"
964 "!\n"
965 ".IGES_2075\n"
966 "\n"
967 "%s produced.\n"
968 "!\n"
969 ".IGES_2076\n"
970 "No TopoDS_Shape produced.\n"
971 "\n"
972 "!Messages for TPSTAT.\n"
973 ".IGES_3000\n"
974 "********************************************************************************\n"
975 ".IGES_3005\n"
976 "General statistics for transfer :\n"
977 "!\n"
978 ".IGES_3010\n"
979 " Number of selected IGES entities : %d\n"
980 "!\n"
981 ".IGES_3011\n"
982 " Number of roots IGES entities : %d\n"
983 "!\n"
984 ".IGES_3015\n"
985 " Number of CasCade resulting Shapes : %d\n"
986 "!\n"
987 ".IGES_3020\n"
988 " Number of warnings : %d\n"
989 "!\n"
990 ".IGES_3025\n"
991 " Number of fails : %d\n"
992 "!\n"
993 ".IGES_3030\n"
994 "Count W/F Type Form Message on IGES entity\n"
995 "----- --- ---- ---- ----------------------\n"
996 "!\n"
997 ".IGES_3035\n"
998 "On IGES entities (DE) :\n"
999 "!\n"
1000 ".IGES_3040\n"
1001 "Count of CasCade resulting shapes\n"
1002 "\n"
1003 "!\n"
1004 ".IGES_3045\n"
1005 "\n"
1006 "Count CasCade Shapes\n"
1007 "----- --------------\n"
1008 "!\n"
1009 ".IGES_3050\n"
1010 "Mapping of all IGES entities\n"
1011 ".IGES_3055\n"
1012 "\n"
1013 "Type Form Count CasCade Shapes\n"
1014 "---- ---- ----- --------------\n"
1015 "!\n"
1016 "! Debug messages\n"
1017 ".IGES_10005\n"
1018 " Small edge removed\n"
1019 ".IGES_10010\n"
1020 " Degenerated edge detected\n"
1021 ".IGES_10015\n"
1022 " Lacking edge inserted\n"
1023 "!\n"
1024 "!\n"
1025 ".IGES_10020\n"
1026 " Null area wire was detected, wire skipped.\n";