0024135: Result of reading step file is invalid.
[occt.git] / src / XSDRAWSTEP / XSDRAWSTEP.cxx
CommitLineData
b311480e 1// Copyright (c) 1999-2012 OPEN CASCADE SAS
2//
3// The content of this file is subject to the Open CASCADE Technology Public
4// License Version 6.5 (the "License"). You may not use the content of this file
5// except in compliance with the License. Please obtain a copy of the License
6// at http://www.opencascade.org and read it completely before using this file.
7//
8// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
9// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
10//
11// The Original Code and all software distributed under the License is
12// distributed on an "AS IS" basis, without warranty of any kind, and the
13// Initial Developer hereby disclaims all such warranties, including without
14// limitation, any warranties of merchantability, fitness for a particular
15// purpose or non-infringement. Please see the License for the specific terms
16// and conditions governing the rights and limitations under the License.
17
7fd59977 18//:k8 abv 6 Jan 98: using parameter "step.group" for writing assemblies/shapes
19#include <XSDRAWSTEP.ixx>
20#include <STEPControl_Controller.hxx>
21#include <STEPControl_ActorWrite.hxx>
22#include <STEPControl_Reader.hxx>
23#include <STEPControl_Writer.hxx>
24#include <STEPControl_StepModelType.hxx>
25#include <XSDRAW.hxx>
26#include <StepSelect_Activator.hxx>
27
28#include <Draw_Appli.hxx>
29#include <Draw_Interpretor.hxx>
30#include <Draw_Printer.hxx>
31#include <Message_Messenger.hxx>
32
33#include <DBRep.hxx>
34
35#include <TCollection_HAsciiString.hxx>
36#include <Interface_Macros.hxx>
37#include <Interface_InterfaceModel.hxx>
38
39// Pour le transfert (write)
40// Pour NewModel et Write : definition de produit (temporaire ...)
41#include <Transfer_FinderProcess.hxx>
42#include <TransferBRep_ShapeMapper.hxx>
43#include <StepShape_ShapeRepresentation.hxx>
44#include <TColStd_HSequenceOfTransient.hxx>
45
46#include <XSControl_Controller.hxx>
47#include <XSControl_WorkSession.hxx>
48#include <StepData_StepModel.hxx>
49
50#include <TopoDS.hxx>
51
52// steptrans
53#include <StepToTopoDS_MakeTransformed.hxx>
54#include <StepGeom_Axis2Placement3d.hxx>
55
56#include <stdio.h>
57#include <Interface_Static.hxx>
58#include <IFSelect_SessionPilot.hxx>
59#include <STEPSelections_Counter.hxx>
60#include <STEPSelections_AssemblyExplorer.hxx>
61
62#include <Draw_ProgressIndicator.hxx>
63#include <Transfer_TransientProcess.hxx>
64
65#include <TopExp_Explorer.hxx>
66#include <XSControl_TransferWriter.hxx>
67#include <Message_ProgressSentry.hxx>
68
69
70extern "C" {
71static void cleanpilot ()
72{
73 XSDRAW::Session()->ClearData(1);
74}
75}
76
77
78//=======================================================================
79//function : Init
80//purpose :
81//=======================================================================
82
83void XSDRAWSTEP::Init ()
84{
85 Handle(StepSelect_Activator) stepact = new StepSelect_Activator;
86 if (STEPControl_Controller::Init()) // XSDRAW::SetNorm("STEP AP-214"); trop tot
87 XSDRAW::SetController(XSControl_Controller::Recorded("STEP"));
88
89 atexit (cleanpilot);
90}
91
92// ######## COMMANDE stepread : teste le Reader #########
93
94//=======================================================================
95//function : stepread
96//purpose :
97//=======================================================================
98
99static Standard_Integer stepread (Draw_Interpretor& di/*theCommands*/, Standard_Integer argc, const char** argv)
100{
bc650d41 101 // On admet le controller AP214 ou une variante
7fd59977 102 DeclareAndCast(STEPControl_Controller,ctl,XSDRAW::Controller());
103 if (ctl.IsNull()) XSDRAW::SetNorm("STEP");
104
bc650d41 105
7fd59977 106 // Progress indicator
107 Handle(Draw_ProgressIndicator) progress = new Draw_ProgressIndicator ( di, 1 );
108 progress->SetScale ( 0, 100, 1 );
109 progress->Show();
bc650d41 110
7fd59977 111 STEPControl_Reader sr (XSDRAW::Session(),Standard_False);
112 TCollection_AsciiString fnom,rnom;
113 Standard_Boolean modfic = XSDRAW::FileAndVar
114 (argv[1],argv[2],"STEP",fnom,rnom);
115 if (modfic) di<<" File STEP to read : "<<fnom.ToCString()<<"\n";
116 else di<<" Model taken from the session : "<<fnom.ToCString()<<"\n";
117 di<<" -- Names of variables BREP-DRAW prefixed by : "<<rnom.ToCString()<<"\n";
118 IFSelect_ReturnStatus readstat = IFSelect_RetVoid;
119
120 progress->NewScope ( 20, "Loading" ); // On average loading takes 20%
121 progress->Show();
122
bc650d41 123 Standard_Boolean fromtcl = Standard_False;
45521367 124 Standard_Boolean aFullMode = Standard_False;
bc650d41
G
125 Standard_Integer k = 3;
126 if(argc > k )
127 {
128 if(argv[k][0] == 'f' || argv[3][0] == 'F')
129 {
130 aFullMode = Standard_True;
131 k++;
132 }
133 else if(argv[k][0] == 'r' || argv[3][0] == 'R')
134 {
135 aFullMode = Standard_False;
136 k++;
137 }
138 else
139 fromtcl = Standard_True;
140
141 }
142 if(!fromtcl)
143 fromtcl = argc > k;
144 if(aFullMode)
145 cout<<"Full model for translation with additional info will be used \n"<<flush;
146 else
147 cout<<"Reduced model for translation without additional info will be used \n"<<flush;
148
149 sr.WS()->SetModeStat(aFullMode);
150
151
7fd59977 152 if (modfic) readstat = sr.ReadFile (fnom.ToCString());
153 else if (XSDRAW::Session()->NbStartingEntities() > 0) readstat = IFSelect_RetDone;
154
155 progress->EndScope();
156 progress->Show();
157
158 if (readstat != IFSelect_RetDone) {
159 if (modfic) di<<"Could not read file "<<fnom.ToCString()<<" , abandon"<<"\n";
160 else di<<"No model loaded"<<"\n";
161 return 1;
162 }
bc650d41 163
7fd59977 164
bc650d41 165 // nom = "." -> fichier deja lu
7fd59977 166 Standard_Integer i, num, nbs, modepri = 1;
167 if (fromtcl) modepri = 4;
168 Handle(Message_Messenger) aDIMessenger =
169 new Message_Messenger (new Draw_Printer(di));
170 while (modepri) {
171 num = sr.NbRootsForTransfer();
172 if (!fromtcl) {
173 di<<"NbRootsForTransfer="<<num<<" :\n";
174 for (i = 1; i <= num; i ++) {
bc650d41
G
175 di<<"Root."<<i<<", Ent. ";
176 sr.Model()->Print(sr.RootForTransfer(i),aDIMessenger);
177 di<<" Type:"<<sr.RootForTransfer(i)->DynamicType()->Name()<<"\n";
7fd59977 178 }
179
180 cout<<"Mode (0 End, 1 root n0 1, 2 one root/n0, 3 one entity/n0, 4 Selection) : "<<flush;
181 cin>>modepri;
182 }
183
184 if (modepri == 0) { di<<"End Reading STEP"<<"\n"; return 0; }
185 if (modepri <= 2) {
186 num = 1;
187 if (modepri == 2) {
bc650d41 188 cout<<"Root N0 : "<<flush; cin>>num;
7fd59977 189 }
190
191 progress->NewScope ( 80, "Translation" );
192 progress->Show();
193 sr.WS()->MapReader()->SetProgress ( progress );
194
195 if (!sr.TransferRoot (num)) di<<"Transfer root n0 "<<num<<" : no result"<<"\n";
196 else {
bc650d41 197 nbs = sr.NbShapes();
91322f44 198 char shname[30]; Sprintf (shname,"%s_%d",rnom.ToCString(),nbs);
bc650d41
G
199 di<<"Transfer root n0 "<<num<<" OK -> DRAW Shape: "<<shname<<"\n";
200 di<<"Now, "<<nbs<<" Shapes produced"<<"\n";
201 TopoDS_Shape sh = sr.Shape(nbs);
202 DBRep::Set (shname,sh);
7fd59977 203 }
204
205 sr.WS()->MapReader()->SetProgress ( 0 );
206 progress->EndScope();
207 progress->Show();
208 }
209 else if (modepri == 3) {
210 cout<<"Entity : "<<flush; num = XSDRAW::GetEntityNumber();
211 if (!sr.TransferOne (num)) di<<"Transfer entity n0 "<<num<<" : no result"<<"\n";
212 else {
bc650d41 213 nbs = sr.NbShapes();
91322f44 214 char shname[30]; Sprintf (shname,"%s_%d",rnom.ToCString(),num);
bc650d41
G
215 di<<"Transfer entity n0 "<<num<<" OK -> DRAW Shape: "<<shname<<"\n";
216 di<<"Now, "<<nbs<<" Shapes produced"<<"\n";
217 TopoDS_Shape sh = sr.Shape(nbs);
218 DBRep::Set (shname,sh);
7fd59977 219 }
220 }
221 else if (modepri == 4) {
bc650d41 222 // char snm[100]; Standard_Integer answer = 1;
7fd59977 223 Handle(TColStd_HSequenceOfTransient) list;
224
bc650d41
G
225 // Selection, nommee ou via tcl. tcl : raccourcis admis
226 // * donne xst-transferrable-roots
7fd59977 227 if (fromtcl) {
bc650d41
G
228 modepri = 0; // d ioffice une seule passe
229 if (argv[k][0] == '*' && argv[k][1] == '\0') {
230 di<<"Transferrable Roots : ";
231 list = XSDRAW::GetList("xst-transferrable-roots");
7fd59977 232 //list = new TColStd_HSequenceOfTransient;
233 //for(Standard_Integer j=1; j<=num; j++)
234 // list->Append(sr.RootForTransfer(j));
bc650d41 235 }
7fd59977 236 else {
bc650d41
G
237 di<<"List given by "<<argv[k];
238 if (argc > k+1) di<<" "<<argv[k+1];
239 di<<" : ";
240 list = XSDRAW::GetList (argv[k], ( argc > (k+1) ? argv[k+1] : 0 ) );
241 }
242 if (list.IsNull()) { di<<"No list defined. Give a selection name or * for all transferrable roots"<<"\n"; continue; }
7fd59977 243 } else {
bc650d41
G
244 cout<<"Name of Selection :"<<flush;
245 list = XSDRAW::GetList();
246 if (list.IsNull()) { di<<"No list defined"<<"\n"; continue; }
7fd59977 247 }
248
249 Standard_Integer ill, nbl = list->Length();
250 di<<"Nb entities selected : "<<nbl<<"\n";
251 if (nbl == 0) continue;
252
253 progress->NewScope ( 80, "Translation" );
254 progress->Show();
255 sr.WS()->MapReader()->SetProgress ( progress );
256
257 Message_ProgressSentry PSentry ( progress, "Root", 0, nbl, 1 );
258 for (ill = 1; ill <= nbl && PSentry.More(); ill ++, PSentry.Next()) {
bc650d41
G
259 num = sr.Model()->Number(list->Value(ill));
260 if (num == 0) continue;
261 if (!sr.TransferOne(num)) di<<"Transfer entity n0 "<<num<<" : no result"<<"\n";
262 else {
263 nbs = sr.NbShapes();
91322f44 264 char shname[30]; Sprintf (shname,"%s_%d",rnom.ToCString(),nbs);
bc650d41
G
265 di<<"Transfer entity n0 "<<num<<" OK -> DRAW Shape: "<<shname<<"\n";
266 di<<"Now, "<<nbs<<" Shapes produced"<<"\n";
267 TopoDS_Shape sh = sr.Shape(nbs);
268 DBRep::Set (shname,sh);
269 }
7fd59977 270 }
271 sr.WS()->MapReader()->SetProgress ( 0 );
272 progress->EndScope();
273 progress->Show();
274 }
275 else di<<"Unknown mode n0 "<<modepri<<"\n";
276 }
277 return 0;
278}
279
280//=======================================================================
281//function : testreadstep
282//purpose :
283//=======================================================================
284static Standard_Integer testread (Draw_Interpretor& di, Standard_Integer argc, const char** argv)
285{
286 if (argc != 3)
287 {
288 di << "ERROR in " << argv[0] << "Wrong Number of Arguments."<<"\n";
289 di << " Usage : " << argv[0] <<" file_name shape_name"<< "\n";
290 return 1;
291 }
292 STEPControl_Reader Reader;
293 Standard_CString filename = argv[1];
294 IFSelect_ReturnStatus readstat = Reader.ReadFile(filename);
295 di<<"Status from reading STEP file "<<filename<<" : ";
296 switch(readstat) {
297 case IFSelect_RetVoid : { di<<"empty file"<<"\n"; return 1; }
298 case IFSelect_RetDone : { di<<"file read"<<"\n"; break; }
299 case IFSelect_RetError : { di<<"file not found"<<"\n"; return 1; }
300 case IFSelect_RetFail : { di<<"error during read"<<"\n"; return 1; }
301 default : { di<<"failure"<<"\n"; return 1; }
302 }
303 Reader.TransferRoots();
304 TopoDS_Shape shape = Reader.OneShape();
305 DBRep::Set(argv[2],shape);
306 di<<"Count of shapes produced : "<<Reader.NbShapes()<<"\n";
307 return 0;
308}
309
310//=======================================================================
311//function : readstep
312//purpose :
313//=======================================================================
314
315static Standard_Integer readstep (Draw_Interpretor& di, Standard_Integer /*argc*/, const char** argv)
316{
317// On admet le controller AP214 ou une variante
318
319
320 STEPControl_Reader sr;
321
322 IFSelect_ReturnStatus readstat = IFSelect_RetVoid;
323
324 readstat = sr.ReadFile (argv[1]);
325
326 if (readstat != IFSelect_RetDone) {
327
328 di<<"No model loaded"<<"\n";
329 return 1;
330 }
331
332
333 Standard_Integer num = sr.NbRootsForTransfer();
334 Standard_Integer modepri;
335 di<<"NbRootsForTransfer="<<num<<" :\n";
336
337 cout<<"Mode (0 End, 1 root n0 1, 2 one root/n0, 3 one entity/n0, 4 Selection) : "<<flush;
338 cin>>modepri;
339 if (modepri == 0) { di<<"End Reading STEP"<<"\n"; return 0; }
340
341
342 if (!sr.TransferRoot (num)) di<<"Transfer root n0 "<<num<<" : no result"<<"\n";
343 else {
344 TopoDS_Shape sh = sr.OneShape();
345 DBRep::Set (argv[2],sh);
346 }
347 cin>>modepri;
348 return 0;
349}
350
351// ######## COMMANDE steptrans : teste les transformations #########
352//=======================================================================
353//function : steptrans
354//purpose :
355//=======================================================================
356
357static Standard_Integer steptrans (Draw_Interpretor& di, Standard_Integer argc, const char** argv)
358{
359 if (argc < 5) { di<<"give shape-name new-shape + entity-n0 entity-n0: AXIS2"<<"\n";
360 return 1; }
361 TopoDS_Shape shape = DBRep::Get(argv[1]);
362 if (shape.IsNull()) { di<<"Not a shape : "<<argv[1]<<"\n"; return 1; }
363 Handle(StepGeom_Axis2Placement3d) ax1,ax2;
364 Standard_Integer n1 = 0, n2 = 0;
365 n1 = XSDRAW::GetEntityNumber(argv[3]);
366 if (argc > 4) n2 = XSDRAW::GetEntityNumber(argv[4]);
367 if (n1 > 0) ax1 = Handle(StepGeom_Axis2Placement3d)::DownCast
368 (XSDRAW::Entity(n1));
369 if (n2 > 0) ax2 = Handle(StepGeom_Axis2Placement3d)::DownCast
370 (XSDRAW::Entity(n2));
371 StepToTopoDS_MakeTransformed mktrans;
372 if (mktrans.Compute (ax1,ax2)) {
373 TopLoc_Location loc (mktrans.Transformation());
374 shape.Move (loc);
375// mktrans.Transform (shape);
376 DBRep::Set (argv[2],shape);
377 di<<"Transformed Shape as "<<argv[2]<<"\n";
378 }
379 else di<<"No transformation computed"<<"\n";
380 return 0;
381}
382
383// ######## COMMANDE stepwrite : teste le Writer #########
384
385//=======================================================================
386//function : stepwrite
387//purpose :
388//=======================================================================
389
390static Standard_Integer stepwrite (Draw_Interpretor& di, Standard_Integer argc, const char** argv)
391{
392// On admet le controller AP214 ou une variante
393 DeclareAndCast(STEPControl_Controller,ctl,XSDRAW::Controller());
394 if (ctl.IsNull()) {
395 XSDRAW::SetNorm("STEP");
396 //sln 14.01.2002 OCC51: assign new value to ctl in order to avoid exception during using one in the function
397 ctl = Handle(STEPControl_Controller)::DownCast(XSDRAW::Controller());
398 }
399
400 if (argc < 3) {
401 di<<"Give mode[1-4] and Shape name + optional file. Mode possible"<<"\n";
402 di<<"f ou 1 : FacettedBRep s ou 2 : ShellBasedSurfaceModel\n"
403 <<"m ou 3 : ManifoldSolidBrep w ou 4 : GeometricCurveSet/WireFrame"<<"\n";
404 return 1; }
405 char modeshape = argv[1][0];
406 STEPControl_StepModelType mode;
407 switch (modeshape) {
408 case 'a' :
409 case '0' : mode = STEPControl_AsIs; break;
410 case 'f' :
411 case '1' : mode = STEPControl_FacetedBrep; break;
412 case 's' :
413 case '2' : mode = STEPControl_ShellBasedSurfaceModel; break;
414 case 'm' :
415 case '3' : mode = STEPControl_ManifoldSolidBrep; break;
416 case 'w' :
417 case '4' : mode = STEPControl_GeometricCurveSet; break;
418 default : di<<"1st arg = mode, incorrect [give fsmw]"<<"\n"; return 1;
419 }
420
421 //:k8 abv 6 Jan 98: using parameter for writing mode (assemblies/shapes)
422 Handle(STEPControl_ActorWrite) ActWrite =
423 Handle(STEPControl_ActorWrite)::DownCast ( ctl->ActorWrite() );
424 if ( ! ActWrite.IsNull() )
425 ActWrite->SetGroupMode (Interface_Static::IVal("write.step.assembly"));
426
427 TopoDS_Shape shape = DBRep::Get(argv[2]);
428 STEPControl_Writer sw (XSDRAW::Session(),Standard_False);
429 Handle(Interface_InterfaceModel) stepmodel = sw.Model();
430 Standard_Integer nbavant = (stepmodel.IsNull() ? 0 : stepmodel->NbEntities());
431
432 Handle(Draw_ProgressIndicator) progress = new Draw_ProgressIndicator ( di, 1 );
433 progress->NewScope(90,"Translating");
434 progress->Show();
435 sw.WS()->TransferWriter()->FinderProcess()->SetProgress(progress);
436
437 Standard_Integer stat = sw.Transfer (shape,mode);
2857a8ac 438 if (stat == IFSelect_RetDone)
439 {
440 di << "Translation: OK\n";
441 }
442 else
443 {
444 di << "Error: translation failed, status = " << stat << "\n";
445 }
7fd59977 446
447 sw.WS()->TransferWriter()->FinderProcess()->SetProgress(0);
448 progress->EndScope();
449 progress->Show();
450 progress->NewScope(10,"Writing");
451 progress->Show();
452
453// Que s est-il passe
454 stepmodel = sw.Model();
455 Standard_Integer nbapres = (stepmodel.IsNull() ? 0 : stepmodel->NbEntities());
456 if (nbavant > 0) di<<"Beware : Model not empty before transferring"<<"\n";
457 if (nbapres <= nbavant) di<<"Beware : No data produced by this transfer"<<"\n";
458 if (nbapres == 0) { di<<"No data to write"<<"\n"; return 0; }
459
7fd59977 460 if (argc <= 3) {
2857a8ac 461 di<<" Now, to write a file, command : writeall filename"<<"\n";
462 return 0;
7fd59977 463 }
7fd59977 464
2857a8ac 465 const char *nomfic = argv[3];
7fd59977 466 stat = sw.Write(nomfic);
467 switch (stat) {
2857a8ac 468 case IFSelect_RetVoid : di<<"Error: No file written"<<"\n"; break;
7fd59977 469 case IFSelect_RetDone : di<<"File "<<nomfic<<" written"<<"\n"; break;
12bf87c5 470 case IFSelect_RetStop : di<<"Error on writing file: no space on disk or destination is write protected"<<"\n"; break;
2857a8ac 471 default : di<<"Error: File "<<nomfic<<" written with fail messages"<<"\n"; break;
7fd59977 472 }
473
474 progress->EndScope();
475 progress->Show();
476
477 return 0;
478}
479//=======================================================================
480//function : testwritestep
481//purpose :
482//=======================================================================
483static Standard_Integer testwrite (Draw_Interpretor& di, Standard_Integer argc, const char** argv)
484{
485 if (argc != 3)
486 {
487 di << "ERROR in " << argv[0] << "Wrong Number of Arguments."<<"\n";
488 di << " Usage : " << argv[0] <<" file_name shape_name "<< "\n";
489 return 1;
490 }
491 STEPControl_Writer Writer;
492 Standard_CString filename = argv[1];
493 TopoDS_Shape shape = DBRep::Get(argv[2]);
494 IFSelect_ReturnStatus stat = Writer.Transfer(shape,STEPControl_AsIs);
495 stat = Writer.Write(filename);
496 if(stat != IFSelect_RetDone){
497 di<<"Error on writing file"<<"\n";
498 return 1;
499 }
500 di<<"File Is Written"<<"\n";
501 return 0;
502}
503
504//=======================================================================
505//function : countexpected
506//purpose :
507//=======================================================================
508
509static Standard_Integer countexpected
510 (Draw_Interpretor& di, Standard_Integer /*argc*/, const char** /*argv*/)
511{
512 Handle(IFSelect_SessionPilot) pilot = XSDRAW::Pilot();
513 Handle(IFSelect_WorkSession) WS = pilot->Session();
514 const Interface_Graph& graph = WS->Graph();
515
516 Handle(TColStd_HSequenceOfTransient) roots = WS->GiveList("xst-transferrable-roots", "");
517 STEPSelections_Counter cnt;
518
519 for (Standard_Integer i =1 ; i <= roots->Length(); i++) {
520 cnt.Count(graph,roots->Value(i));
521 }
522
523 di<< "Instances of Faces \t: "<<cnt.NbInstancesOfFaces()<<"\n";
524 di<< "Instances of Shells\t: "<<cnt.NbInstancesOfShells()<<"\n";
525 di<< "Instances of Solids\t: "<<cnt.NbInstancesOfSolids()<<"\n";
526 di<< "Instances of Wires in GS\t: "<<cnt.NbInstancesOfWires()<<"\n";
527 di<< "Instances of Edges in GS\t: "<<cnt.NbInstancesOfEdges()<<"\n";
528
529 di<< "Source Faces \t: "<<cnt.NbSourceFaces()<<"\n";
530 di<< "Source Shells\t: "<<cnt.NbSourceShells()<<"\n";
531 di<< "Source Solids\t: "<<cnt.NbSourceSolids()<<"\n";
532 di<< "Source Wires in GS\t: "<<cnt.NbSourceWires()<<"\n";
533 di<< "Source Edges in GS\t: "<<cnt.NbSourceEdges()<<"\n";
534
535 return 1;
536}
537
538static Standard_Integer dumpassembly
539 (Draw_Interpretor& /*di*/, Standard_Integer /*argc*/, const char** /*argv*/)
540{
541 Handle(IFSelect_SessionPilot) pilot = XSDRAW::Pilot();
542 Handle(IFSelect_WorkSession) WS = pilot->Session();
543 const Interface_Graph& graph = WS->Graph();
544
545 STEPSelections_AssemblyExplorer exp(graph);
546 exp.Dump(cout);
547 return 0;
548}
549
d402d481 550static Standard_Integer stepfileunits (Draw_Interpretor& di, Standard_Integer argc, const char** argv)
551{
552
553 if( argc < 2)
554 {
555 cout<<"Error: Invalid number of parameters. Should be: getfileunits name_file"<<endl;
556 return 1;
557 }
558 STEPControl_Reader aStepReader;
559
560 IFSelect_ReturnStatus readstat = IFSelect_RetVoid;
561 readstat = aStepReader.ReadFile (argv[1]);
562
563 if (readstat != IFSelect_RetDone) {
564
565 di<<"No model loaded"<<"\n";
566 return 1;
567 }
568
569 TColStd_SequenceOfAsciiString anUnitLengthNames;
570 TColStd_SequenceOfAsciiString anUnitAngleNames;
571 TColStd_SequenceOfAsciiString anUnitSolidAngleNames;
572 aStepReader.FileUnits( anUnitLengthNames,anUnitAngleNames,anUnitSolidAngleNames);
573
302f96fb 574 Standard_Integer i =1;
d402d481 575 di<<"=====================================================\n";
576 di<<"LENTH Unit"<<"\n";
577 for( ; i <= anUnitLengthNames.Length() ; i++)
578 di<<anUnitLengthNames(i).ToCString()<<"\n";
579
580 di<<"=====================================================\n";
581 di<<"Angle Unit"<<"\n";
582 for( i =1 ; i <= anUnitAngleNames.Length() ; i++)
583 di<<anUnitAngleNames(i).ToCString()<<"\n";
584
585 di<<"=====================================================\n";
586 di<<"Solid Angle Unit"<<"\n";
587 for( i =1 ; i <= anUnitSolidAngleNames.Length() ; i++)
588 di<<anUnitSolidAngleNames(i).ToCString()<<"\n";
589
590 return 0;
591}
7fd59977 592// ######## COMMANDE stepwrite : teste le Writer #########
593
594void XSDRAWSTEP::InitCommands (Draw_Interpretor& theCommands)
595{
596 const char* g = "DE: STEP"; // Step transfer file commands
597 XSDRAWSTEP::Init();
598 XSDRAW::LoadDraw(theCommands);
599 theCommands.Add("stepwrite" , "stepwrite mode[0-4 afsmw] shape", __FILE__, stepwrite, g);
600 theCommands.Add("testwritestep", "testwritestep filename.stp shape", __FILE__, testwrite, g);
bc650d41 601 theCommands.Add("stepread", "stepread [file] [f or r (type of model full or reduced)]",__FILE__, stepread, g);
7fd59977 602 theCommands.Add("testreadstep", "testreadstep [file] [name DRAW]", __FILE__, testread, g);
603 theCommands.Add("steptrans", "steptrans shape stepax1 stepax2", __FILE__, steptrans, g);
604 theCommands.Add("countexpected","TEST", __FILE__, countexpected, g);
605 theCommands.Add("dumpassembly", "TEST", __FILE__, dumpassembly, g);
606 theCommands.Add("readstep", "readstep [file]", __FILE__, readstep, g);
d402d481 607 theCommands.Add("stepfileunits" , "stepfileunits name_file", __FILE__, stepfileunits, g);
7fd59977 608}