7fd59977 |
1 | //:k8 abv 6 Jan 98: using parameter "step.group" for writing assemblies/shapes |
2 | #include <XSDRAWSTEP.ixx> |
3 | #include <STEPControl_Controller.hxx> |
4 | #include <STEPControl_ActorWrite.hxx> |
5 | #include <STEPControl_Reader.hxx> |
6 | #include <STEPControl_Writer.hxx> |
7 | #include <STEPControl_StepModelType.hxx> |
8 | #include <XSDRAW.hxx> |
9 | #include <StepSelect_Activator.hxx> |
10 | |
11 | #include <Draw_Appli.hxx> |
12 | #include <Draw_Interpretor.hxx> |
13 | #include <Draw_Printer.hxx> |
14 | #include <Message_Messenger.hxx> |
15 | |
16 | #include <DBRep.hxx> |
17 | |
18 | #include <TCollection_HAsciiString.hxx> |
19 | #include <Interface_Macros.hxx> |
20 | #include <Interface_InterfaceModel.hxx> |
21 | |
22 | // Pour le transfert (write) |
23 | // Pour NewModel et Write : definition de produit (temporaire ...) |
24 | #include <Transfer_FinderProcess.hxx> |
25 | #include <TransferBRep_ShapeMapper.hxx> |
26 | #include <StepShape_ShapeRepresentation.hxx> |
27 | #include <TColStd_HSequenceOfTransient.hxx> |
28 | |
29 | #include <XSControl_Controller.hxx> |
30 | #include <XSControl_WorkSession.hxx> |
31 | #include <StepData_StepModel.hxx> |
32 | |
33 | #include <TopoDS.hxx> |
34 | |
35 | // steptrans |
36 | #include <StepToTopoDS_MakeTransformed.hxx> |
37 | #include <StepGeom_Axis2Placement3d.hxx> |
38 | |
39 | #include <stdio.h> |
40 | #include <Interface_Static.hxx> |
41 | #include <IFSelect_SessionPilot.hxx> |
42 | #include <STEPSelections_Counter.hxx> |
43 | #include <STEPSelections_AssemblyExplorer.hxx> |
44 | |
45 | #include <Draw_ProgressIndicator.hxx> |
46 | #include <Transfer_TransientProcess.hxx> |
47 | |
48 | #include <TopExp_Explorer.hxx> |
49 | #include <XSControl_TransferWriter.hxx> |
50 | #include <Message_ProgressSentry.hxx> |
51 | |
52 | |
53 | extern "C" { |
54 | static void cleanpilot () |
55 | { |
56 | XSDRAW::Session()->ClearData(1); |
57 | } |
58 | } |
59 | |
60 | |
61 | //======================================================================= |
62 | //function : Init |
63 | //purpose : |
64 | //======================================================================= |
65 | |
66 | void XSDRAWSTEP::Init () |
67 | { |
68 | Handle(StepSelect_Activator) stepact = new StepSelect_Activator; |
69 | if (STEPControl_Controller::Init()) // XSDRAW::SetNorm("STEP AP-214"); trop tot |
70 | XSDRAW::SetController(XSControl_Controller::Recorded("STEP")); |
71 | |
72 | atexit (cleanpilot); |
73 | } |
74 | |
75 | // ######## COMMANDE stepread : teste le Reader ######### |
76 | |
77 | //======================================================================= |
78 | //function : stepread |
79 | //purpose : |
80 | //======================================================================= |
81 | |
82 | static Standard_Integer stepread (Draw_Interpretor& di/*theCommands*/, Standard_Integer argc, const char** argv) |
83 | { |
84 | // On admet le controller AP214 ou une variante |
85 | DeclareAndCast(STEPControl_Controller,ctl,XSDRAW::Controller()); |
86 | if (ctl.IsNull()) XSDRAW::SetNorm("STEP"); |
87 | |
88 | // Progress indicator |
89 | Handle(Draw_ProgressIndicator) progress = new Draw_ProgressIndicator ( di, 1 ); |
90 | progress->SetScale ( 0, 100, 1 ); |
91 | progress->Show(); |
92 | |
93 | STEPControl_Reader sr (XSDRAW::Session(),Standard_False); |
94 | TCollection_AsciiString fnom,rnom; |
95 | Standard_Boolean modfic = XSDRAW::FileAndVar |
96 | (argv[1],argv[2],"STEP",fnom,rnom); |
97 | if (modfic) di<<" File STEP to read : "<<fnom.ToCString()<<"\n"; |
98 | else di<<" Model taken from the session : "<<fnom.ToCString()<<"\n"; |
99 | di<<" -- Names of variables BREP-DRAW prefixed by : "<<rnom.ToCString()<<"\n"; |
100 | IFSelect_ReturnStatus readstat = IFSelect_RetVoid; |
101 | |
102 | progress->NewScope ( 20, "Loading" ); // On average loading takes 20% |
103 | progress->Show(); |
104 | |
105 | if (modfic) readstat = sr.ReadFile (fnom.ToCString()); |
106 | else if (XSDRAW::Session()->NbStartingEntities() > 0) readstat = IFSelect_RetDone; |
107 | |
108 | progress->EndScope(); |
109 | progress->Show(); |
110 | |
111 | if (readstat != IFSelect_RetDone) { |
112 | if (modfic) di<<"Could not read file "<<fnom.ToCString()<<" , abandon"<<"\n"; |
113 | else di<<"No model loaded"<<"\n"; |
114 | return 1; |
115 | } |
116 | |
117 | Standard_Boolean fromtcl = (argc > 3); |
118 | // nom = "." -> fichier deja lu |
119 | Standard_Integer i, num, nbs, modepri = 1; |
120 | if (fromtcl) modepri = 4; |
121 | Handle(Message_Messenger) aDIMessenger = |
122 | new Message_Messenger (new Draw_Printer(di)); |
123 | while (modepri) { |
124 | num = sr.NbRootsForTransfer(); |
125 | if (!fromtcl) { |
126 | di<<"NbRootsForTransfer="<<num<<" :\n"; |
127 | for (i = 1; i <= num; i ++) { |
128 | di<<"Root."<<i<<", Ent. "; |
129 | sr.Model()->Print(sr.RootForTransfer(i),aDIMessenger); |
130 | di<<" Type:"<<sr.RootForTransfer(i)->DynamicType()->Name()<<"\n"; |
131 | } |
132 | |
133 | cout<<"Mode (0 End, 1 root n0 1, 2 one root/n0, 3 one entity/n0, 4 Selection) : "<<flush; |
134 | cin>>modepri; |
135 | } |
136 | |
137 | if (modepri == 0) { di<<"End Reading STEP"<<"\n"; return 0; } |
138 | if (modepri <= 2) { |
139 | num = 1; |
140 | if (modepri == 2) { |
141 | cout<<"Root N0 : "<<flush; cin>>num; |
142 | } |
143 | |
144 | progress->NewScope ( 80, "Translation" ); |
145 | progress->Show(); |
146 | sr.WS()->MapReader()->SetProgress ( progress ); |
147 | |
148 | if (!sr.TransferRoot (num)) di<<"Transfer root n0 "<<num<<" : no result"<<"\n"; |
149 | else { |
150 | nbs = sr.NbShapes(); |
151 | char shname[30]; sprintf (shname,"%s_%d",rnom.ToCString(),nbs); |
152 | di<<"Transfer root n0 "<<num<<" OK -> DRAW Shape: "<<shname<<"\n"; |
153 | di<<"Now, "<<nbs<<" Shapes produced"<<"\n"; |
154 | TopoDS_Shape sh = sr.Shape(nbs); |
155 | DBRep::Set (shname,sh); |
156 | } |
157 | |
158 | sr.WS()->MapReader()->SetProgress ( 0 ); |
159 | progress->EndScope(); |
160 | progress->Show(); |
161 | } |
162 | else if (modepri == 3) { |
163 | cout<<"Entity : "<<flush; num = XSDRAW::GetEntityNumber(); |
164 | if (!sr.TransferOne (num)) di<<"Transfer entity n0 "<<num<<" : no result"<<"\n"; |
165 | else { |
166 | nbs = sr.NbShapes(); |
167 | char shname[30]; sprintf (shname,"%s_%d",rnom.ToCString(),num); |
168 | di<<"Transfer entity n0 "<<num<<" OK -> DRAW Shape: "<<shname<<"\n"; |
169 | di<<"Now, "<<nbs<<" Shapes produced"<<"\n"; |
170 | TopoDS_Shape sh = sr.Shape(nbs); |
171 | DBRep::Set (shname,sh); |
172 | } |
173 | } |
174 | else if (modepri == 4) { |
175 | // char snm[100]; Standard_Integer answer = 1; |
176 | Handle(TColStd_HSequenceOfTransient) list; |
177 | |
178 | // Selection, nommee ou via tcl. tcl : raccourcis admis |
179 | // * donne xst-transferrable-roots |
180 | if (fromtcl) { |
181 | modepri = 0; // d ioffice une seule passe |
182 | if (argv[3][0] == '*' && argv[3][1] == '\0') { |
183 | di<<"Transferrable Roots : "; |
184 | list = XSDRAW::GetList("xst-transferrable-roots"); |
185 | //list = new TColStd_HSequenceOfTransient; |
186 | //for(Standard_Integer j=1; j<=num; j++) |
187 | // list->Append(sr.RootForTransfer(j)); |
188 | } |
189 | else { |
190 | di<<"List given by "<<argv[3]; |
191 | if (argc > 4) di<<" "<<argv[4]; |
192 | di<<" : "; |
193 | list = XSDRAW::GetList (argv[3], ( argc > 4 ? argv[4] : 0 ) ); |
194 | } |
195 | if (list.IsNull()) { di<<"No list defined. Give a selection name or * for all transferrable roots"<<"\n"; continue; } |
196 | } else { |
197 | cout<<"Name of Selection :"<<flush; |
198 | list = XSDRAW::GetList(); |
199 | if (list.IsNull()) { di<<"No list defined"<<"\n"; continue; } |
200 | } |
201 | |
202 | Standard_Integer ill, nbl = list->Length(); |
203 | di<<"Nb entities selected : "<<nbl<<"\n"; |
204 | if (nbl == 0) continue; |
205 | |
206 | progress->NewScope ( 80, "Translation" ); |
207 | progress->Show(); |
208 | sr.WS()->MapReader()->SetProgress ( progress ); |
209 | |
210 | Message_ProgressSentry PSentry ( progress, "Root", 0, nbl, 1 ); |
211 | for (ill = 1; ill <= nbl && PSentry.More(); ill ++, PSentry.Next()) { |
212 | num = sr.Model()->Number(list->Value(ill)); |
213 | if (num == 0) continue; |
214 | if (!sr.TransferOne(num)) di<<"Transfer entity n0 "<<num<<" : no result"<<"\n"; |
215 | else { |
216 | nbs = sr.NbShapes(); |
217 | char shname[30]; sprintf (shname,"%s_%d",rnom.ToCString(),nbs); |
218 | di<<"Transfer entity n0 "<<num<<" OK -> DRAW Shape: "<<shname<<"\n"; |
219 | di<<"Now, "<<nbs<<" Shapes produced"<<"\n"; |
220 | TopoDS_Shape sh = sr.Shape(nbs); |
221 | DBRep::Set (shname,sh); |
222 | } |
223 | } |
224 | sr.WS()->MapReader()->SetProgress ( 0 ); |
225 | progress->EndScope(); |
226 | progress->Show(); |
227 | } |
228 | else di<<"Unknown mode n0 "<<modepri<<"\n"; |
229 | } |
230 | return 0; |
231 | } |
232 | |
233 | //======================================================================= |
234 | //function : testreadstep |
235 | //purpose : |
236 | //======================================================================= |
237 | static Standard_Integer testread (Draw_Interpretor& di, Standard_Integer argc, const char** argv) |
238 | { |
239 | if (argc != 3) |
240 | { |
241 | di << "ERROR in " << argv[0] << "Wrong Number of Arguments."<<"\n"; |
242 | di << " Usage : " << argv[0] <<" file_name shape_name"<< "\n"; |
243 | return 1; |
244 | } |
245 | STEPControl_Reader Reader; |
246 | Standard_CString filename = argv[1]; |
247 | IFSelect_ReturnStatus readstat = Reader.ReadFile(filename); |
248 | di<<"Status from reading STEP file "<<filename<<" : "; |
249 | switch(readstat) { |
250 | case IFSelect_RetVoid : { di<<"empty file"<<"\n"; return 1; } |
251 | case IFSelect_RetDone : { di<<"file read"<<"\n"; break; } |
252 | case IFSelect_RetError : { di<<"file not found"<<"\n"; return 1; } |
253 | case IFSelect_RetFail : { di<<"error during read"<<"\n"; return 1; } |
254 | default : { di<<"failure"<<"\n"; return 1; } |
255 | } |
256 | Reader.TransferRoots(); |
257 | TopoDS_Shape shape = Reader.OneShape(); |
258 | DBRep::Set(argv[2],shape); |
259 | di<<"Count of shapes produced : "<<Reader.NbShapes()<<"\n"; |
260 | return 0; |
261 | } |
262 | |
263 | //======================================================================= |
264 | //function : readstep |
265 | //purpose : |
266 | //======================================================================= |
267 | |
268 | static Standard_Integer readstep (Draw_Interpretor& di, Standard_Integer /*argc*/, const char** argv) |
269 | { |
270 | // On admet le controller AP214 ou une variante |
271 | |
272 | |
273 | STEPControl_Reader sr; |
274 | |
275 | IFSelect_ReturnStatus readstat = IFSelect_RetVoid; |
276 | |
277 | readstat = sr.ReadFile (argv[1]); |
278 | |
279 | if (readstat != IFSelect_RetDone) { |
280 | |
281 | di<<"No model loaded"<<"\n"; |
282 | return 1; |
283 | } |
284 | |
285 | |
286 | Standard_Integer num = sr.NbRootsForTransfer(); |
287 | Standard_Integer modepri; |
288 | di<<"NbRootsForTransfer="<<num<<" :\n"; |
289 | |
290 | cout<<"Mode (0 End, 1 root n0 1, 2 one root/n0, 3 one entity/n0, 4 Selection) : "<<flush; |
291 | cin>>modepri; |
292 | if (modepri == 0) { di<<"End Reading STEP"<<"\n"; return 0; } |
293 | |
294 | |
295 | if (!sr.TransferRoot (num)) di<<"Transfer root n0 "<<num<<" : no result"<<"\n"; |
296 | else { |
297 | TopoDS_Shape sh = sr.OneShape(); |
298 | DBRep::Set (argv[2],sh); |
299 | } |
300 | cin>>modepri; |
301 | return 0; |
302 | } |
303 | |
304 | // ######## COMMANDE steptrans : teste les transformations ######### |
305 | //======================================================================= |
306 | //function : steptrans |
307 | //purpose : |
308 | //======================================================================= |
309 | |
310 | static Standard_Integer steptrans (Draw_Interpretor& di, Standard_Integer argc, const char** argv) |
311 | { |
312 | if (argc < 5) { di<<"give shape-name new-shape + entity-n0 entity-n0: AXIS2"<<"\n"; |
313 | return 1; } |
314 | TopoDS_Shape shape = DBRep::Get(argv[1]); |
315 | if (shape.IsNull()) { di<<"Not a shape : "<<argv[1]<<"\n"; return 1; } |
316 | Handle(StepGeom_Axis2Placement3d) ax1,ax2; |
317 | Standard_Integer n1 = 0, n2 = 0; |
318 | n1 = XSDRAW::GetEntityNumber(argv[3]); |
319 | if (argc > 4) n2 = XSDRAW::GetEntityNumber(argv[4]); |
320 | if (n1 > 0) ax1 = Handle(StepGeom_Axis2Placement3d)::DownCast |
321 | (XSDRAW::Entity(n1)); |
322 | if (n2 > 0) ax2 = Handle(StepGeom_Axis2Placement3d)::DownCast |
323 | (XSDRAW::Entity(n2)); |
324 | StepToTopoDS_MakeTransformed mktrans; |
325 | if (mktrans.Compute (ax1,ax2)) { |
326 | TopLoc_Location loc (mktrans.Transformation()); |
327 | shape.Move (loc); |
328 | // mktrans.Transform (shape); |
329 | DBRep::Set (argv[2],shape); |
330 | di<<"Transformed Shape as "<<argv[2]<<"\n"; |
331 | } |
332 | else di<<"No transformation computed"<<"\n"; |
333 | return 0; |
334 | } |
335 | |
336 | // ######## COMMANDE stepwrite : teste le Writer ######### |
337 | |
338 | //======================================================================= |
339 | //function : stepwrite |
340 | //purpose : |
341 | //======================================================================= |
342 | |
343 | static Standard_Integer stepwrite (Draw_Interpretor& di, Standard_Integer argc, const char** argv) |
344 | { |
345 | // On admet le controller AP214 ou une variante |
346 | DeclareAndCast(STEPControl_Controller,ctl,XSDRAW::Controller()); |
347 | if (ctl.IsNull()) { |
348 | XSDRAW::SetNorm("STEP"); |
349 | //sln 14.01.2002 OCC51: assign new value to ctl in order to avoid exception during using one in the function |
350 | ctl = Handle(STEPControl_Controller)::DownCast(XSDRAW::Controller()); |
351 | } |
352 | |
353 | if (argc < 3) { |
354 | di<<"Give mode[1-4] and Shape name + optional file. Mode possible"<<"\n"; |
355 | di<<"f ou 1 : FacettedBRep s ou 2 : ShellBasedSurfaceModel\n" |
356 | <<"m ou 3 : ManifoldSolidBrep w ou 4 : GeometricCurveSet/WireFrame"<<"\n"; |
357 | return 1; } |
358 | char modeshape = argv[1][0]; |
359 | STEPControl_StepModelType mode; |
360 | switch (modeshape) { |
361 | case 'a' : |
362 | case '0' : mode = STEPControl_AsIs; break; |
363 | case 'f' : |
364 | case '1' : mode = STEPControl_FacetedBrep; break; |
365 | case 's' : |
366 | case '2' : mode = STEPControl_ShellBasedSurfaceModel; break; |
367 | case 'm' : |
368 | case '3' : mode = STEPControl_ManifoldSolidBrep; break; |
369 | case 'w' : |
370 | case '4' : mode = STEPControl_GeometricCurveSet; break; |
371 | default : di<<"1st arg = mode, incorrect [give fsmw]"<<"\n"; return 1; |
372 | } |
373 | |
374 | //:k8 abv 6 Jan 98: using parameter for writing mode (assemblies/shapes) |
375 | Handle(STEPControl_ActorWrite) ActWrite = |
376 | Handle(STEPControl_ActorWrite)::DownCast ( ctl->ActorWrite() ); |
377 | if ( ! ActWrite.IsNull() ) |
378 | ActWrite->SetGroupMode (Interface_Static::IVal("write.step.assembly")); |
379 | |
380 | TopoDS_Shape shape = DBRep::Get(argv[2]); |
381 | STEPControl_Writer sw (XSDRAW::Session(),Standard_False); |
382 | Handle(Interface_InterfaceModel) stepmodel = sw.Model(); |
383 | Standard_Integer nbavant = (stepmodel.IsNull() ? 0 : stepmodel->NbEntities()); |
384 | |
385 | Handle(Draw_ProgressIndicator) progress = new Draw_ProgressIndicator ( di, 1 ); |
386 | progress->NewScope(90,"Translating"); |
387 | progress->Show(); |
388 | sw.WS()->TransferWriter()->FinderProcess()->SetProgress(progress); |
389 | |
390 | Standard_Integer stat = sw.Transfer (shape,mode); |
391 | di<<"execution status : "<<stat<<"\n"; |
392 | |
393 | sw.WS()->TransferWriter()->FinderProcess()->SetProgress(0); |
394 | progress->EndScope(); |
395 | progress->Show(); |
396 | progress->NewScope(10,"Writing"); |
397 | progress->Show(); |
398 | |
399 | // Que s est-il passe |
400 | stepmodel = sw.Model(); |
401 | Standard_Integer nbapres = (stepmodel.IsNull() ? 0 : stepmodel->NbEntities()); |
402 | if (nbavant > 0) di<<"Beware : Model not empty before transferring"<<"\n"; |
403 | if (nbapres <= nbavant) di<<"Beware : No data produced by this transfer"<<"\n"; |
404 | if (nbapres == 0) { di<<"No data to write"<<"\n"; return 0; } |
405 | |
406 | char nomfic[150] ; |
407 | Standard_Integer modepri = 1; |
408 | |
409 | if (argc <= 3) { |
410 | cout<<" Mode (0 end, 1 file) :"<<flush; |
411 | cin >> modepri; di << "Output mode " << modepri << "\n"; |
412 | } |
413 | else modepri = 2; |
414 | |
415 | if (modepri == 0) return 0; |
416 | else if (modepri == 1) { |
417 | cout << " Output file name :" << flush; cin >> nomfic; |
418 | } |
419 | else if (modepri == 2) strcpy (nomfic,argv[3]); |
420 | |
421 | di << " Output on file : " << nomfic << "\n"; |
422 | stat = sw.Write(nomfic); |
423 | switch (stat) { |
424 | case IFSelect_RetVoid : di<<"No file written"<<"\n"; break; |
425 | case IFSelect_RetDone : di<<"File "<<nomfic<<" written"<<"\n"; break; |
426 | default : di<<"Error on writing file"<<"\n"; break; |
427 | } |
428 | |
429 | progress->EndScope(); |
430 | progress->Show(); |
431 | |
432 | return 0; |
433 | } |
434 | //======================================================================= |
435 | //function : testwritestep |
436 | //purpose : |
437 | //======================================================================= |
438 | static Standard_Integer testwrite (Draw_Interpretor& di, Standard_Integer argc, const char** argv) |
439 | { |
440 | if (argc != 3) |
441 | { |
442 | di << "ERROR in " << argv[0] << "Wrong Number of Arguments."<<"\n"; |
443 | di << " Usage : " << argv[0] <<" file_name shape_name "<< "\n"; |
444 | return 1; |
445 | } |
446 | STEPControl_Writer Writer; |
447 | Standard_CString filename = argv[1]; |
448 | TopoDS_Shape shape = DBRep::Get(argv[2]); |
449 | IFSelect_ReturnStatus stat = Writer.Transfer(shape,STEPControl_AsIs); |
450 | stat = Writer.Write(filename); |
451 | if(stat != IFSelect_RetDone){ |
452 | di<<"Error on writing file"<<"\n"; |
453 | return 1; |
454 | } |
455 | di<<"File Is Written"<<"\n"; |
456 | return 0; |
457 | } |
458 | |
459 | //======================================================================= |
460 | //function : countexpected |
461 | //purpose : |
462 | //======================================================================= |
463 | |
464 | static Standard_Integer countexpected |
465 | (Draw_Interpretor& di, Standard_Integer /*argc*/, const char** /*argv*/) |
466 | { |
467 | Handle(IFSelect_SessionPilot) pilot = XSDRAW::Pilot(); |
468 | Handle(IFSelect_WorkSession) WS = pilot->Session(); |
469 | const Interface_Graph& graph = WS->Graph(); |
470 | |
471 | Handle(TColStd_HSequenceOfTransient) roots = WS->GiveList("xst-transferrable-roots", ""); |
472 | STEPSelections_Counter cnt; |
473 | |
474 | for (Standard_Integer i =1 ; i <= roots->Length(); i++) { |
475 | cnt.Count(graph,roots->Value(i)); |
476 | } |
477 | |
478 | di<< "Instances of Faces \t: "<<cnt.NbInstancesOfFaces()<<"\n"; |
479 | di<< "Instances of Shells\t: "<<cnt.NbInstancesOfShells()<<"\n"; |
480 | di<< "Instances of Solids\t: "<<cnt.NbInstancesOfSolids()<<"\n"; |
481 | di<< "Instances of Wires in GS\t: "<<cnt.NbInstancesOfWires()<<"\n"; |
482 | di<< "Instances of Edges in GS\t: "<<cnt.NbInstancesOfEdges()<<"\n"; |
483 | |
484 | di<< "Source Faces \t: "<<cnt.NbSourceFaces()<<"\n"; |
485 | di<< "Source Shells\t: "<<cnt.NbSourceShells()<<"\n"; |
486 | di<< "Source Solids\t: "<<cnt.NbSourceSolids()<<"\n"; |
487 | di<< "Source Wires in GS\t: "<<cnt.NbSourceWires()<<"\n"; |
488 | di<< "Source Edges in GS\t: "<<cnt.NbSourceEdges()<<"\n"; |
489 | |
490 | return 1; |
491 | } |
492 | |
493 | static Standard_Integer dumpassembly |
494 | (Draw_Interpretor& /*di*/, Standard_Integer /*argc*/, const char** /*argv*/) |
495 | { |
496 | Handle(IFSelect_SessionPilot) pilot = XSDRAW::Pilot(); |
497 | Handle(IFSelect_WorkSession) WS = pilot->Session(); |
498 | const Interface_Graph& graph = WS->Graph(); |
499 | |
500 | STEPSelections_AssemblyExplorer exp(graph); |
501 | exp.Dump(cout); |
502 | return 0; |
503 | } |
504 | |
505 | // ######## COMMANDE stepwrite : teste le Writer ######### |
506 | |
507 | void XSDRAWSTEP::InitCommands (Draw_Interpretor& theCommands) |
508 | { |
509 | const char* g = "DE: STEP"; // Step transfer file commands |
510 | XSDRAWSTEP::Init(); |
511 | XSDRAW::LoadDraw(theCommands); |
512 | theCommands.Add("stepwrite" , "stepwrite mode[0-4 afsmw] shape", __FILE__, stepwrite, g); |
513 | theCommands.Add("testwritestep", "testwritestep filename.stp shape", __FILE__, testwrite, g); |
514 | theCommands.Add("stepread", "stepread [file]", __FILE__, stepread, g); |
515 | theCommands.Add("testreadstep", "testreadstep [file] [name DRAW]", __FILE__, testread, g); |
516 | theCommands.Add("steptrans", "steptrans shape stepax1 stepax2", __FILE__, steptrans, g); |
517 | theCommands.Add("countexpected","TEST", __FILE__, countexpected, g); |
518 | theCommands.Add("dumpassembly", "TEST", __FILE__, dumpassembly, g); |
519 | theCommands.Add("readstep", "readstep [file]", __FILE__, readstep, g); |
520 | } |