42cf5bc1 |
1 | // Created on: 1993-06-14 |
2 | // Created by: Jean Yves LEBEY |
3 | // Copyright (c) 1993-1999 Matra Datavision |
4 | // Copyright (c) 1999-2014 OPEN CASCADE SAS |
5 | // |
6 | // This file is part of Open CASCADE Technology software library. |
7 | // |
8 | // This library is free software; you can redistribute it and/or modify it under |
9 | // the terms of the GNU Lesser General Public License version 2.1 as published |
10 | // by the Free Software Foundation, with special exception defined in the file |
11 | // OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT |
12 | // distribution for complete text of the license and disclaimer of any warranty. |
13 | // |
14 | // Alternatively, this file may be used under the terms of Open CASCADE |
15 | // commercial license or contractual agreement. |
16 | |
17 | #ifndef _TopOpeBRepBuild_Builder_HeaderFile |
18 | #define _TopOpeBRepBuild_Builder_HeaderFile |
19 | |
20 | #include <Standard.hxx> |
21 | #include <Standard_DefineAlloc.hxx> |
22 | #include <Standard_Handle.hxx> |
23 | |
24 | #include <TopAbs_State.hxx> |
25 | #include <TopoDS_Shape.hxx> |
26 | #include <TopOpeBRepDS_BuildTool.hxx> |
27 | #include <TopTools_HArray1OfShape.hxx> |
28 | #include <TopTools_DataMapOfIntegerListOfShape.hxx> |
29 | #include <TopTools_HArray1OfListOfShape.hxx> |
30 | #include <TopOpeBRepDS_DataMapOfShapeListOfShapeOn1State.hxx> |
31 | #include <TopTools_ListOfShape.hxx> |
32 | #include <TopTools_DataMapOfShapeListOfShape.hxx> |
33 | #include <Standard_Boolean.hxx> |
34 | #include <TopoDS_Solid.hxx> |
35 | #include <TopoDS_Face.hxx> |
36 | #include <TopoDS_Edge.hxx> |
37 | #include <TopTools_IndexedMapOfShape.hxx> |
38 | #include <Standard_Integer.hxx> |
39 | #include <TopOpeBRepTool_ShapeClassifier.hxx> |
40 | #include <TopTools_MapOfShape.hxx> |
41 | #include <TCollection_AsciiString.hxx> |
42 | #include <TopTools_IndexedDataMapOfShapeShape.hxx> |
43 | #include <TopTools_IndexedMapOfOrientedShape.hxx> |
44 | #include <TopTools_DataMapOfShapeShape.hxx> |
45 | #include <TopAbs_ShapeEnum.hxx> |
46 | #include <TopAbs_Orientation.hxx> |
47 | #include <TopTools_DataMapOfIntegerShape.hxx> |
48 | #include <TopOpeBRepDS_Config.hxx> |
49 | #include <Standard_Real.hxx> |
50 | #include <TopTools_DataMapOfShapeInteger.hxx> |
51 | #include <Standard_Address.hxx> |
52 | class TopOpeBRepDS_HDataStructure; |
53 | class Standard_NoSuchObject; |
54 | class TopOpeBRepBuild_HBuilder; |
55 | class TopOpeBRepDS_BuildTool; |
56 | class TopoDS_Shape; |
57 | class TopOpeBRepTool_ShapeExplorer; |
58 | class TopOpeBRepBuild_ShapeSet; |
59 | class TopOpeBRepBuild_EdgeBuilder; |
60 | class TopOpeBRepBuild_FaceBuilder; |
61 | class TopOpeBRepBuild_SolidBuilder; |
62 | class TopOpeBRepBuild_WireEdgeSet; |
63 | class TopOpeBRepDS_PointIterator; |
64 | class TopOpeBRepBuild_PaveSet; |
65 | class TopOpeBRepBuild_GTopo; |
66 | class TopOpeBRepBuild_ShellFaceSet; |
67 | class TopOpeBRepDS_SurfaceIterator; |
68 | class TopOpeBRepDS_CurveIterator; |
69 | class TopoDS_Vertex; |
70 | class TopoDS_Edge; |
71 | class gp_Pnt; |
72 | class TopoDS_Face; |
73 | class TCollection_AsciiString; |
74 | |
75 | |
76 | //! The Builder algorithm constructs topological |
77 | //! objects from an existing topology and new |
78 | //! geometries attached to the topology. It is used to |
79 | //! construct the result of a topological operation; |
80 | //! the existing topologies are the parts involved in |
81 | //! the topological operation and the new geometries |
82 | //! are the intersection lines and points. |
83 | class TopOpeBRepBuild_Builder |
84 | { |
85 | public: |
86 | |
87 | DEFINE_STANDARD_ALLOC |
88 | |
89 | |
90 | Standard_EXPORT TopOpeBRepBuild_Builder(const TopOpeBRepDS_BuildTool& BT); |
91 | |
92 | Standard_EXPORT virtual void Destroy(); |
93 | Standard_EXPORT virtual ~TopOpeBRepBuild_Builder() { Destroy() ; } |
94 | |
95 | Standard_EXPORT TopOpeBRepDS_BuildTool& ChangeBuildTool(); |
96 | |
97 | Standard_EXPORT const TopOpeBRepDS_BuildTool& BuildTool() const; |
98 | |
99 | //! Stores the data structure <HDS>, |
100 | //! Create shapes from the new geometries. |
101 | Standard_EXPORT virtual void Perform (const Handle(TopOpeBRepDS_HDataStructure)& HDS); |
102 | |
103 | //! Stores the data structure <HDS>, |
104 | //! Create shapes from the new geometries, |
105 | //! Evaluates if an operation performed on shapes S1,S2 |
106 | //! is a particular case. |
107 | Standard_EXPORT virtual void Perform (const Handle(TopOpeBRepDS_HDataStructure)& HDS, const TopoDS_Shape& S1, const TopoDS_Shape& S2); |
108 | |
109 | //! returns the DS handled by this builder |
110 | Standard_EXPORT Handle(TopOpeBRepDS_HDataStructure) DataStructure() const; |
111 | |
112 | //! Removes all splits and merges already performed. |
113 | //! Does NOT clear the handled DS. |
114 | Standard_EXPORT virtual void Clear(); |
115 | |
116 | //! Merges the two edges <S1> and <S2> keeping the |
117 | //! parts in each edge of states <TB1> and <TB2>. |
118 | //! Booleans onA, onB, onAB indicate wheter parts of edges |
119 | //! found as state ON respectively on first, second, and both |
120 | //! shapes must be (or not) built. |
121 | Standard_EXPORT void MergeEdges (const TopTools_ListOfShape& L1, const TopAbs_State TB1, const TopTools_ListOfShape& L2, const TopAbs_State TB2, const Standard_Boolean onA = Standard_False, const Standard_Boolean onB = Standard_False, const Standard_Boolean onAB = Standard_False); |
122 | |
123 | //! Merges the two faces <S1> and <S2> keeping the |
124 | //! parts in each face of states <TB1> and <TB2>. |
125 | Standard_EXPORT void MergeFaces (const TopTools_ListOfShape& S1, const TopAbs_State TB1, const TopTools_ListOfShape& S2, const TopAbs_State TB2, const Standard_Boolean onA = Standard_False, const Standard_Boolean onB = Standard_False, const Standard_Boolean onAB = Standard_False); |
126 | |
127 | //! Merges the two solids <S1> and <S2> keeping the |
128 | //! parts in each solid of states <TB1> and <TB2>. |
129 | Standard_EXPORT void MergeSolids (const TopoDS_Shape& S1, const TopAbs_State TB1, const TopoDS_Shape& S2, const TopAbs_State TB2); |
130 | |
131 | //! Merges the two shapes <S1> and <S2> keeping the |
132 | //! parts of states <TB1>,<TB2> in <S1>,<S2>. |
133 | Standard_EXPORT void MergeShapes (const TopoDS_Shape& S1, const TopAbs_State TB1, const TopoDS_Shape& S2, const TopAbs_State TB2); |
134 | |
135 | Standard_EXPORT void End(); |
136 | |
137 | Standard_EXPORT Standard_Boolean Classify() const; |
138 | |
139 | Standard_EXPORT void ChangeClassify (const Standard_Boolean B); |
140 | |
141 | //! Merges the solid <S> keeping the |
142 | //! parts of state <TB>. |
143 | Standard_EXPORT void MergeSolid (const TopoDS_Shape& S, const TopAbs_State TB); |
144 | |
145 | //! Returns the vertex created on point <I>. |
146 | Standard_EXPORT const TopoDS_Shape& NewVertex (const Standard_Integer I) const; |
147 | |
148 | //! Returns the edges created on curve <I>. |
149 | Standard_EXPORT const TopTools_ListOfShape& NewEdges (const Standard_Integer I) const; |
150 | |
151 | //! Returns the faces created on surface <I>. |
152 | Standard_EXPORT const TopTools_ListOfShape& NewFaces (const Standard_Integer I) const; |
153 | |
154 | //! Returns True if the shape <S> has been split. |
155 | Standard_EXPORT Standard_Boolean IsSplit (const TopoDS_Shape& S, const TopAbs_State TB) const; |
156 | |
157 | //! Returns the split parts <TB> of shape <S>. |
158 | Standard_EXPORT const TopTools_ListOfShape& Splits (const TopoDS_Shape& S, const TopAbs_State TB) const; |
159 | |
160 | //! Returns True if the shape <S> has been merged. |
161 | Standard_EXPORT Standard_Boolean IsMerged (const TopoDS_Shape& S, const TopAbs_State TB) const; |
162 | |
163 | //! Returns the merged parts <TB> of shape <S>. |
164 | Standard_EXPORT const TopTools_ListOfShape& Merged (const TopoDS_Shape& S, const TopAbs_State TB) const; |
165 | |
166 | Standard_EXPORT void InitSection(); |
167 | |
168 | //! create parts ON solid of section edges |
169 | Standard_EXPORT void SplitSectionEdges(); |
170 | |
171 | //! create parts ON solid of section edges |
172 | Standard_EXPORT virtual void SplitSectionEdge (const TopoDS_Shape& E); |
173 | |
174 | //! return the section edges built on new curves. |
175 | Standard_EXPORT void SectionCurves (TopTools_ListOfShape& L); |
176 | |
177 | //! return the parts of edges found ON the boundary |
178 | //! of the two arguments S1,S2 of Perform() |
179 | Standard_EXPORT void SectionEdges (TopTools_ListOfShape& L); |
180 | |
181 | //! Fills anAncMap with pairs (edge,ancestor edge) for each |
182 | //! split from the map aMapON for the shape object identified |
183 | //! by ShapeRank |
184 | Standard_EXPORT void FillSecEdgeAncestorMap (const Standard_Integer aShapeRank, const TopTools_MapOfShape& aMapON, TopTools_DataMapOfShapeShape& anAncMap) const; |
185 | |
186 | //! return all section edges. |
187 | Standard_EXPORT void Section (TopTools_ListOfShape& L); |
188 | |
189 | Standard_EXPORT const TopTools_ListOfShape& Section(); |
190 | |
191 | //! update the DS by creating new geometries. |
192 | //! create vertices on DS points. |
193 | Standard_EXPORT void BuildVertices (const Handle(TopOpeBRepDS_HDataStructure)& DS); |
194 | |
195 | //! update the DS by creating new geometries. |
196 | //! create shapes from the new geometries. |
197 | Standard_EXPORT void BuildEdges (const Handle(TopOpeBRepDS_HDataStructure)& DS); |
198 | |
199 | Standard_EXPORT const TopOpeBRepDS_DataMapOfShapeListOfShapeOn1State& MSplit (const TopAbs_State s) const; |
200 | |
201 | Standard_EXPORT TopOpeBRepDS_DataMapOfShapeListOfShapeOn1State& ChangeMSplit (const TopAbs_State s); |
202 | |
203 | Standard_EXPORT void MakeEdges (const TopoDS_Shape& E, TopOpeBRepBuild_EdgeBuilder& B, TopTools_ListOfShape& L); |
204 | |
205 | Standard_EXPORT void MakeFaces (const TopoDS_Shape& F, TopOpeBRepBuild_FaceBuilder& B, TopTools_ListOfShape& L); |
206 | |
207 | Standard_EXPORT void MakeSolids (TopOpeBRepBuild_SolidBuilder& B, TopTools_ListOfShape& L); |
208 | |
209 | Standard_EXPORT void MakeShells (TopOpeBRepBuild_SolidBuilder& B, TopTools_ListOfShape& L); |
210 | |
211 | //! Returns a ref.on the list of shapes connected to <S> as |
212 | //! <TB> split parts of <S>. |
213 | //! Mark <S> as split in <TB> parts. |
214 | Standard_EXPORT TopTools_ListOfShape& ChangeSplit (const TopoDS_Shape& S, const TopAbs_State TB); |
215 | |
216 | Standard_EXPORT Standard_Boolean Opec12() const; |
217 | |
218 | Standard_EXPORT Standard_Boolean Opec21() const; |
219 | |
220 | Standard_EXPORT Standard_Boolean Opecom() const; |
221 | |
222 | Standard_EXPORT Standard_Boolean Opefus() const; |
223 | |
224 | Standard_EXPORT TopAbs_State ShapePosition (const TopoDS_Shape& S, const TopTools_ListOfShape& LS); |
225 | |
226 | Standard_EXPORT Standard_Boolean KeepShape (const TopoDS_Shape& S, const TopTools_ListOfShape& LS, const TopAbs_State T); |
227 | |
228 | Standard_EXPORT static TopAbs_ShapeEnum TopType (const TopoDS_Shape& S); |
229 | |
230 | Standard_EXPORT static Standard_Boolean Reverse (const TopAbs_State T1, const TopAbs_State T2); |
231 | |
232 | Standard_EXPORT static TopAbs_Orientation Orient (const TopAbs_Orientation O, const Standard_Boolean R); |
233 | |
234 | Standard_EXPORT void FindSameDomain (TopTools_ListOfShape& L1, TopTools_ListOfShape& L2) const; |
235 | |
236 | Standard_EXPORT void FindSameDomainSameOrientation (TopTools_ListOfShape& LSO, TopTools_ListOfShape& LDO) const; |
237 | |
238 | Standard_EXPORT void MapShapes (const TopoDS_Shape& S1, const TopoDS_Shape& S2); |
239 | |
240 | Standard_EXPORT void ClearMaps(); |
241 | |
242 | Standard_EXPORT void FindSameRank (const TopTools_ListOfShape& L1, const Standard_Integer R, TopTools_ListOfShape& L2) const; |
243 | |
244 | Standard_EXPORT Standard_Integer ShapeRank (const TopoDS_Shape& S) const; |
245 | |
246 | Standard_EXPORT Standard_Boolean IsShapeOf (const TopoDS_Shape& S, const Standard_Integer I12) const; |
247 | |
248 | Standard_EXPORT static Standard_Boolean Contains (const TopoDS_Shape& S, const TopTools_ListOfShape& L); |
249 | |
250 | Standard_EXPORT Standard_Integer FindIsKPart(); |
251 | |
252 | Standard_EXPORT Standard_Integer IsKPart() const; |
253 | |
254 | Standard_EXPORT virtual void MergeKPart(); |
255 | |
256 | Standard_EXPORT virtual void MergeKPart (const TopAbs_State TB1, const TopAbs_State TB2); |
257 | |
258 | Standard_EXPORT void MergeKPartiskole(); |
259 | |
260 | Standard_EXPORT void MergeKPartiskoletge(); |
261 | |
262 | Standard_EXPORT void MergeKPartisdisj(); |
263 | |
264 | Standard_EXPORT void MergeKPartisfafa(); |
265 | |
266 | Standard_EXPORT void MergeKPartissoso(); |
267 | |
268 | Standard_EXPORT Standard_Integer KPiskole(); |
269 | |
270 | Standard_EXPORT Standard_Integer KPiskoletge(); |
271 | |
272 | Standard_EXPORT Standard_Integer KPisdisj(); |
273 | |
274 | Standard_EXPORT Standard_Integer KPisfafa(); |
275 | |
276 | Standard_EXPORT Standard_Integer KPissoso(); |
277 | |
278 | Standard_EXPORT void KPClearMaps(); |
279 | |
280 | Standard_EXPORT Standard_Integer KPlhg (const TopoDS_Shape& S, const TopAbs_ShapeEnum T, TopTools_ListOfShape& L) const; |
281 | |
282 | Standard_EXPORT Standard_Integer KPlhg (const TopoDS_Shape& S, const TopAbs_ShapeEnum T) const; |
283 | |
284 | Standard_EXPORT Standard_Integer KPlhsd (const TopoDS_Shape& S, const TopAbs_ShapeEnum T, TopTools_ListOfShape& L) const; |
285 | |
286 | Standard_EXPORT Standard_Integer KPlhsd (const TopoDS_Shape& S, const TopAbs_ShapeEnum T) const; |
287 | |
288 | Standard_EXPORT TopAbs_State KPclasSS (const TopoDS_Shape& S1, const TopTools_ListOfShape& exceptLS1, const TopoDS_Shape& S2); |
289 | |
290 | Standard_EXPORT TopAbs_State KPclasSS (const TopoDS_Shape& S1, const TopoDS_Shape& exceptS1, const TopoDS_Shape& S2); |
291 | |
292 | Standard_EXPORT TopAbs_State KPclasSS (const TopoDS_Shape& S1, const TopoDS_Shape& S2); |
293 | |
294 | Standard_EXPORT Standard_Boolean KPiskolesh (const TopoDS_Shape& S, TopTools_ListOfShape& LS, TopTools_ListOfShape& LF) const; |
295 | |
296 | Standard_EXPORT Standard_Boolean KPiskoletgesh (const TopoDS_Shape& S, TopTools_ListOfShape& LS, TopTools_ListOfShape& LF) const; |
297 | |
298 | Standard_EXPORT void KPSameDomain (TopTools_ListOfShape& L1, TopTools_ListOfShape& L2) const; |
299 | |
300 | Standard_EXPORT Standard_Integer KPisdisjsh (const TopoDS_Shape& S) const; |
301 | |
302 | Standard_EXPORT Standard_Integer KPisfafash (const TopoDS_Shape& S) const; |
303 | |
304 | Standard_EXPORT Standard_Integer KPissososh (const TopoDS_Shape& S) const; |
305 | |
306 | Standard_EXPORT void KPiskoleanalyse (const TopAbs_State FT1, const TopAbs_State FT2, const TopAbs_State ST1, const TopAbs_State ST2, Standard_Integer& I, Standard_Integer& I1, Standard_Integer& I2) const; |
307 | |
308 | Standard_EXPORT void KPiskoletgeanalyse (const TopOpeBRepDS_Config Conf, const TopAbs_State ST1, const TopAbs_State ST2, Standard_Integer& I) const; |
309 | |
310 | Standard_EXPORT void KPisdisjanalyse (const TopAbs_State ST1, const TopAbs_State ST2, Standard_Integer& I, Standard_Integer& IC1, Standard_Integer& IC2) const; |
311 | |
312 | Standard_EXPORT static Standard_Integer KPls (const TopoDS_Shape& S, const TopAbs_ShapeEnum T, TopTools_ListOfShape& L); |
313 | |
314 | Standard_EXPORT static Standard_Integer KPls (const TopoDS_Shape& S, const TopAbs_ShapeEnum T); |
315 | |
316 | Standard_EXPORT TopAbs_State KPclassF (const TopoDS_Shape& F1, const TopoDS_Shape& F2); |
317 | |
318 | Standard_EXPORT void KPclassFF (const TopoDS_Shape& F1, const TopoDS_Shape& F2, TopAbs_State& T1, TopAbs_State& T2); |
319 | |
320 | Standard_EXPORT Standard_Boolean KPiskoleFF (const TopoDS_Shape& F1, const TopoDS_Shape& F2, TopAbs_State& T1, TopAbs_State& T2); |
321 | |
322 | Standard_EXPORT static Standard_Boolean KPContains (const TopoDS_Shape& S, const TopTools_ListOfShape& L); |
323 | |
324 | Standard_EXPORT TopoDS_Shape KPmakeface (const TopoDS_Shape& F1, const TopTools_ListOfShape& LF2, const TopAbs_State T1, const TopAbs_State T2, const Standard_Boolean R1, const Standard_Boolean R2); |
325 | |
326 | Standard_EXPORT static Standard_Integer KPreturn (const Standard_Integer KP); |
327 | |
328 | Standard_EXPORT void SplitEvisoONperiodicF(); |
329 | |
330 | Standard_EXPORT void GMergeSolids (const TopTools_ListOfShape& LSO1, const TopTools_ListOfShape& LSO2, const TopOpeBRepBuild_GTopo& G); |
331 | |
332 | Standard_EXPORT void GFillSolidsSFS (const TopTools_ListOfShape& LSO1, const TopTools_ListOfShape& LSO2, const TopOpeBRepBuild_GTopo& G, TopOpeBRepBuild_ShellFaceSet& SFS); |
333 | |
334 | Standard_EXPORT virtual void GFillSolidSFS (const TopoDS_Shape& SO1, const TopTools_ListOfShape& LSO2, const TopOpeBRepBuild_GTopo& G, TopOpeBRepBuild_ShellFaceSet& SFS); |
335 | |
336 | Standard_EXPORT void GFillSurfaceTopologySFS (const TopoDS_Shape& SO1, const TopOpeBRepBuild_GTopo& G, TopOpeBRepBuild_ShellFaceSet& SFS); |
337 | |
338 | Standard_EXPORT void GFillSurfaceTopologySFS (const TopOpeBRepDS_SurfaceIterator& IT, const TopOpeBRepBuild_GTopo& G, TopOpeBRepBuild_ShellFaceSet& SFS) const; |
339 | |
340 | Standard_EXPORT virtual void GFillShellSFS (const TopoDS_Shape& SH1, const TopTools_ListOfShape& LSO2, const TopOpeBRepBuild_GTopo& G, TopOpeBRepBuild_ShellFaceSet& SFS); |
341 | |
342 | Standard_EXPORT void GFillFaceSFS (const TopoDS_Shape& F1, const TopTools_ListOfShape& LSO2, const TopOpeBRepBuild_GTopo& G, TopOpeBRepBuild_ShellFaceSet& SFS); |
343 | |
344 | Standard_EXPORT void GSplitFaceSFS (const TopoDS_Shape& F1, const TopTools_ListOfShape& LSclass, const TopOpeBRepBuild_GTopo& G, TopOpeBRepBuild_ShellFaceSet& SFS); |
345 | |
346 | Standard_EXPORT void GMergeFaceSFS (const TopoDS_Shape& F, const TopOpeBRepBuild_GTopo& G, TopOpeBRepBuild_ShellFaceSet& SFS); |
347 | |
348 | Standard_EXPORT void GSplitFace (const TopoDS_Shape& F, const TopOpeBRepBuild_GTopo& G, const TopTools_ListOfShape& LSclass); |
349 | |
350 | Standard_EXPORT void AddONPatchesSFS (const TopOpeBRepBuild_GTopo& G, TopOpeBRepBuild_ShellFaceSet& SFS); |
351 | |
352 | Standard_EXPORT void FillOnPatches (const TopTools_ListOfShape& anEdgesON, const TopoDS_Shape& aBaseFace, const TopTools_IndexedMapOfOrientedShape& avoidMap); |
353 | |
354 | Standard_EXPORT void FindFacesTouchingEdge (const TopoDS_Shape& aFace, const TopoDS_Shape& anEdge, const Standard_Integer aShRank, TopTools_ListOfShape& aFaces) const; |
355 | |
356 | Standard_EXPORT void GMergeFaces (const TopTools_ListOfShape& LF1, const TopTools_ListOfShape& LF2, const TopOpeBRepBuild_GTopo& G); |
357 | |
358 | Standard_EXPORT void GFillFacesWES (const TopTools_ListOfShape& LF1, const TopTools_ListOfShape& LF2, const TopOpeBRepBuild_GTopo& G, TopOpeBRepBuild_WireEdgeSet& WES); |
359 | |
360 | Standard_EXPORT void GFillFacesWESK (const TopTools_ListOfShape& LF1, const TopTools_ListOfShape& LF2, const TopOpeBRepBuild_GTopo& G, TopOpeBRepBuild_WireEdgeSet& WES, const Standard_Integer K); |
361 | |
362 | Standard_EXPORT void GFillFacesWESMakeFaces (const TopTools_ListOfShape& LF1, const TopTools_ListOfShape& LF2, const TopTools_ListOfShape& LSO, const TopOpeBRepBuild_GTopo& G); |
363 | |
364 | Standard_EXPORT void GFillFaceWES (const TopoDS_Shape& F, const TopTools_ListOfShape& LF2, const TopOpeBRepBuild_GTopo& G, TopOpeBRepBuild_WireEdgeSet& WES); |
365 | |
366 | Standard_EXPORT void GFillCurveTopologyWES (const TopoDS_Shape& F, const TopOpeBRepBuild_GTopo& G, TopOpeBRepBuild_WireEdgeSet& WES); |
367 | |
368 | Standard_EXPORT void GFillCurveTopologyWES (const TopOpeBRepDS_CurveIterator& IT, const TopOpeBRepBuild_GTopo& G, TopOpeBRepBuild_WireEdgeSet& WES) const; |
369 | |
370 | Standard_EXPORT void GFillONPartsWES (const TopoDS_Shape& F, const TopOpeBRepBuild_GTopo& G, const TopTools_ListOfShape& LSclass, TopOpeBRepBuild_WireEdgeSet& WES); |
371 | |
372 | Standard_EXPORT void GFillWireWES (const TopoDS_Shape& W, const TopTools_ListOfShape& LF2, const TopOpeBRepBuild_GTopo& G, TopOpeBRepBuild_WireEdgeSet& WES); |
373 | |
374 | Standard_EXPORT void GFillEdgeWES (const TopoDS_Shape& E, const TopTools_ListOfShape& LF2, const TopOpeBRepBuild_GTopo& G, TopOpeBRepBuild_WireEdgeSet& WES); |
375 | |
376 | Standard_EXPORT void GSplitEdgeWES (const TopoDS_Shape& E, const TopTools_ListOfShape& LF2, const TopOpeBRepBuild_GTopo& G, TopOpeBRepBuild_WireEdgeSet& WES); |
377 | |
378 | Standard_EXPORT void GMergeEdgeWES (const TopoDS_Shape& E, const TopOpeBRepBuild_GTopo& G, TopOpeBRepBuild_WireEdgeSet& WES); |
379 | |
380 | Standard_EXPORT void GSplitEdge (const TopoDS_Shape& E, const TopOpeBRepBuild_GTopo& G, const TopTools_ListOfShape& LSclass); |
381 | |
382 | Standard_EXPORT void GMergeEdges (const TopTools_ListOfShape& LE1, const TopTools_ListOfShape& LE2, const TopOpeBRepBuild_GTopo& G); |
383 | |
384 | Standard_EXPORT void GFillEdgesPVS (const TopTools_ListOfShape& LE1, const TopTools_ListOfShape& LE2, const TopOpeBRepBuild_GTopo& G, TopOpeBRepBuild_PaveSet& PVS); |
385 | |
386 | Standard_EXPORT void GFillEdgePVS (const TopoDS_Shape& E, const TopTools_ListOfShape& LE2, const TopOpeBRepBuild_GTopo& G, TopOpeBRepBuild_PaveSet& PVS); |
387 | |
388 | Standard_EXPORT void GFillPointTopologyPVS (const TopoDS_Shape& E, const TopOpeBRepBuild_GTopo& G, TopOpeBRepBuild_PaveSet& PVS); |
389 | |
390 | Standard_EXPORT void GFillPointTopologyPVS (const TopoDS_Shape& E, const TopOpeBRepDS_PointIterator& IT, const TopOpeBRepBuild_GTopo& G, TopOpeBRepBuild_PaveSet& PVS) const; |
391 | |
392 | Standard_EXPORT Standard_Boolean GParamOnReference (const TopoDS_Vertex& V, const TopoDS_Edge& E, Standard_Real& P) const; |
393 | |
394 | Standard_EXPORT Standard_Boolean GKeepShape (const TopoDS_Shape& S, const TopTools_ListOfShape& Lref, const TopAbs_State T); |
395 | |
396 | //! return True if S is classified <T> / Lref shapes |
397 | Standard_EXPORT Standard_Boolean GKeepShape1 (const TopoDS_Shape& S, const TopTools_ListOfShape& Lref, const TopAbs_State T, TopAbs_State& pos); |
398 | |
399 | //! add to Lou the shapes of Lin classified <T> / Lref shapes. |
400 | //! Lou is not cleared. (S is a dummy trace argument) |
401 | Standard_EXPORT void GKeepShapes (const TopoDS_Shape& S, const TopTools_ListOfShape& Lref, const TopAbs_State T, const TopTools_ListOfShape& Lin, TopTools_ListOfShape& Lou); |
402 | |
403 | Standard_EXPORT void GSFSMakeSolids (const TopoDS_Shape& SOF, TopOpeBRepBuild_ShellFaceSet& SFS, TopTools_ListOfShape& LOSO); |
404 | |
405 | Standard_EXPORT void GSOBUMakeSolids (const TopoDS_Shape& SOF, TopOpeBRepBuild_SolidBuilder& SOBU, TopTools_ListOfShape& LOSO); |
406 | |
407 | Standard_EXPORT virtual void GWESMakeFaces (const TopoDS_Shape& FF, TopOpeBRepBuild_WireEdgeSet& WES, TopTools_ListOfShape& LOF); |
408 | |
409 | Standard_EXPORT void GFABUMakeFaces (const TopoDS_Shape& FF, TopOpeBRepBuild_FaceBuilder& FABU, TopTools_ListOfShape& LOF, TopTools_DataMapOfShapeInteger& MWisOld); |
410 | |
411 | Standard_EXPORT void RegularizeFaces (const TopoDS_Shape& FF, const TopTools_ListOfShape& lnewFace, TopTools_ListOfShape& LOF); |
412 | |
413 | Standard_EXPORT void RegularizeFace (const TopoDS_Shape& FF, const TopoDS_Shape& newFace, TopTools_ListOfShape& LOF); |
414 | |
415 | Standard_EXPORT void RegularizeSolids (const TopoDS_Shape& SS, const TopTools_ListOfShape& lnewSolid, TopTools_ListOfShape& LOS); |
416 | |
417 | Standard_EXPORT void RegularizeSolid (const TopoDS_Shape& SS, const TopoDS_Shape& newSolid, TopTools_ListOfShape& LOS); |
418 | |
419 | Standard_EXPORT void GPVSMakeEdges (const TopoDS_Shape& EF, TopOpeBRepBuild_PaveSet& PVS, TopTools_ListOfShape& LOE) const; |
420 | |
421 | Standard_EXPORT void GEDBUMakeEdges (const TopoDS_Shape& EF, TopOpeBRepBuild_EdgeBuilder& EDBU, TopTools_ListOfShape& LOE) const; |
422 | |
423 | Standard_EXPORT Standard_Boolean GToSplit (const TopoDS_Shape& S, const TopAbs_State TB) const; |
424 | |
425 | Standard_EXPORT Standard_Boolean GToMerge (const TopoDS_Shape& S) const; |
426 | |
427 | Standard_EXPORT static Standard_Boolean GTakeCommonOfSame (const TopOpeBRepBuild_GTopo& G); |
428 | |
429 | Standard_EXPORT static Standard_Boolean GTakeCommonOfDiff (const TopOpeBRepBuild_GTopo& G); |
430 | |
431 | Standard_EXPORT void GFindSamDom (const TopoDS_Shape& S, TopTools_ListOfShape& L1, TopTools_ListOfShape& L2) const; |
432 | |
433 | Standard_EXPORT void GFindSamDom (TopTools_ListOfShape& L1, TopTools_ListOfShape& L2) const; |
434 | |
435 | Standard_EXPORT void GFindSamDomSODO (const TopoDS_Shape& S, TopTools_ListOfShape& LSO, TopTools_ListOfShape& LDO) const; |
436 | |
437 | Standard_EXPORT void GFindSamDomSODO (TopTools_ListOfShape& LSO, TopTools_ListOfShape& LDO) const; |
438 | |
439 | Standard_EXPORT void GMapShapes (const TopoDS_Shape& S1, const TopoDS_Shape& S2); |
440 | |
441 | Standard_EXPORT void GClearMaps(); |
442 | |
443 | Standard_EXPORT void GFindSameRank (const TopTools_ListOfShape& L1, const Standard_Integer R, TopTools_ListOfShape& L2) const; |
444 | |
445 | Standard_EXPORT Standard_Integer GShapeRank (const TopoDS_Shape& S) const; |
446 | |
447 | Standard_EXPORT Standard_Boolean GIsShapeOf (const TopoDS_Shape& S, const Standard_Integer I12) const; |
448 | |
449 | Standard_EXPORT static Standard_Boolean GContains (const TopoDS_Shape& S, const TopTools_ListOfShape& L); |
450 | |
451 | Standard_EXPORT static void GCopyList (const TopTools_ListOfShape& Lin, const Standard_Integer i1, const Standard_Integer i2, TopTools_ListOfShape& Lou); |
452 | |
453 | Standard_EXPORT static void GCopyList (const TopTools_ListOfShape& Lin, TopTools_ListOfShape& Lou); |
454 | |
455 | Standard_EXPORT void GdumpLS (const TopTools_ListOfShape& L) const; |
456 | |
457 | Standard_EXPORT static void GdumpPNT (const gp_Pnt& P); |
458 | |
459 | Standard_EXPORT static void GdumpORIPARPNT (const TopAbs_Orientation o, const Standard_Real p, const gp_Pnt& Pnt); |
460 | |
461 | Standard_EXPORT void GdumpSHA (const TopoDS_Shape& S, const Standard_Address str = NULL) const; |
462 | |
463 | Standard_EXPORT void GdumpSHAORI (const TopoDS_Shape& S, const Standard_Address str = NULL) const; |
464 | |
465 | Standard_EXPORT void GdumpSHAORIGEO (const TopoDS_Shape& S, const Standard_Address str = NULL) const; |
466 | |
467 | Standard_EXPORT void GdumpSHASTA (const Standard_Integer iS, const TopAbs_State T, const TCollection_AsciiString& a = "", const TCollection_AsciiString& b = "") const; |
468 | |
469 | Standard_EXPORT void GdumpSHASTA (const TopoDS_Shape& S, const TopAbs_State T, const TCollection_AsciiString& a = "", const TCollection_AsciiString& b = "") const; |
470 | |
471 | Standard_EXPORT void GdumpSHASTA (const Standard_Integer iS, const TopAbs_State T, const TopOpeBRepBuild_ShapeSet& SS, const TCollection_AsciiString& a = "", const TCollection_AsciiString& b = "", const TCollection_AsciiString& c = "\n") const; |
472 | |
473 | Standard_EXPORT void GdumpEDG (const TopoDS_Shape& S, const Standard_Address str = NULL) const; |
474 | |
475 | Standard_EXPORT void GdumpEDGVER (const TopoDS_Shape& E, const TopoDS_Shape& V, const Standard_Address str = NULL) const; |
476 | |
477 | Standard_EXPORT void GdumpSAMDOM (const TopTools_ListOfShape& L, const Standard_Address str = NULL) const; |
478 | |
479 | Standard_EXPORT void GdumpEXP (const TopOpeBRepTool_ShapeExplorer& E) const; |
480 | |
481 | Standard_EXPORT void GdumpSOBU (TopOpeBRepBuild_SolidBuilder& SB) const; |
482 | |
483 | Standard_EXPORT void GdumpFABU (TopOpeBRepBuild_FaceBuilder& FB) const; |
484 | |
485 | Standard_EXPORT void GdumpEDBU (TopOpeBRepBuild_EdgeBuilder& EB) const; |
486 | |
487 | Standard_EXPORT Standard_Boolean GtraceSPS (const Standard_Integer iS) const; |
488 | |
489 | Standard_EXPORT Standard_Boolean GtraceSPS (const Standard_Integer iS, const Standard_Integer jS) const; |
490 | |
491 | Standard_EXPORT Standard_Boolean GtraceSPS (const TopoDS_Shape& S) const; |
492 | |
493 | Standard_EXPORT Standard_Boolean GtraceSPS (const TopoDS_Shape& S, Standard_Integer& IS) const; |
494 | |
495 | Standard_EXPORT void GdumpSHASETreset(); |
496 | |
497 | Standard_EXPORT Standard_Integer GdumpSHASETindex(); |
498 | |
499 | Standard_EXPORT static void PrintGeo (const TopoDS_Shape& S); |
500 | |
501 | Standard_EXPORT static void PrintSur (const TopoDS_Face& F); |
502 | |
503 | Standard_EXPORT static void PrintCur (const TopoDS_Edge& E); |
504 | |
505 | Standard_EXPORT static void PrintPnt (const TopoDS_Vertex& V); |
506 | |
507 | Standard_EXPORT static void PrintOri (const TopoDS_Shape& S); |
508 | |
509 | Standard_EXPORT static TCollection_AsciiString StringState (const TopAbs_State S); |
510 | |
511 | Standard_EXPORT static Standard_Boolean GcheckNBOUNDS (const TopoDS_Shape& E); |
512 | |
513 | |
514 | friend class TopOpeBRepBuild_HBuilder; |
515 | |
516 | |
517 | protected: |
518 | |
519 | |
520 | //! update the DS by creating new geometries. |
521 | //! create edges on the new curve <Icurv>. |
522 | Standard_EXPORT void BuildEdges (const Standard_Integer iC, const Handle(TopOpeBRepDS_HDataStructure)& DS); |
523 | |
524 | //! update the DS by creating new geometries. |
525 | //! create faces on the new surface <ISurf>. |
526 | Standard_EXPORT void BuildFaces (const Standard_Integer iS, const Handle(TopOpeBRepDS_HDataStructure)& DS); |
527 | |
528 | //! update the DS by creating new geometries. |
529 | //! create shapes from the new geometries. |
530 | Standard_EXPORT void BuildFaces (const Handle(TopOpeBRepDS_HDataStructure)& DS); |
531 | |
532 | //! Split <E1> keeping the parts of state <TB1>. |
533 | Standard_EXPORT void SplitEdge (const TopoDS_Shape& E1, const TopAbs_State TB1, const TopAbs_State TB2); |
534 | |
535 | //! Split <E1> keeping the parts of state <TB1>. |
536 | Standard_EXPORT void SplitEdge1 (const TopoDS_Shape& E1, const TopAbs_State TB1, const TopAbs_State TB2); |
537 | |
538 | //! Split <E1> keeping the parts of state <TB1>. |
539 | Standard_EXPORT void SplitEdge2 (const TopoDS_Shape& E1, const TopAbs_State TB1, const TopAbs_State TB2); |
540 | |
541 | //! Split <F1> keeping the parts of state <TB1>. |
542 | //! Merge faces with same domain, keeping parts of |
543 | //! state <TB2>. |
544 | Standard_EXPORT void SplitFace (const TopoDS_Shape& F1, const TopAbs_State TB1, const TopAbs_State TB2); |
545 | |
546 | Standard_EXPORT void SplitFace1 (const TopoDS_Shape& F1, const TopAbs_State TB1, const TopAbs_State TB2); |
547 | |
548 | Standard_EXPORT void SplitFace2 (const TopoDS_Shape& F1, const TopAbs_State TB1, const TopAbs_State TB2); |
549 | |
550 | //! Split <S1> keeping the parts of state <TB1>. |
551 | Standard_EXPORT void SplitSolid (const TopoDS_Shape& S1, const TopAbs_State TB1, const TopAbs_State TB2); |
552 | |
553 | //! Explore shapes of given by explorer <Ex> to split them. |
554 | //! Store new shapes in the set <SS>. |
555 | //! According to RevOri, reverse or not their orientation. |
556 | Standard_EXPORT void SplitShapes (TopOpeBRepTool_ShapeExplorer& Ex, const TopAbs_State TB1, const TopAbs_State TB2, TopOpeBRepBuild_ShapeSet& SS, const Standard_Boolean RevOri); |
557 | |
558 | //! Split edges of <F1> and store wires and edges in |
559 | //! the set <WES>. According to RevOri, reverse (or not) orientation. |
560 | Standard_EXPORT void FillFace (const TopoDS_Shape& F1, const TopAbs_State TB1, const TopTools_ListOfShape& LF2, const TopAbs_State TB2, TopOpeBRepBuild_WireEdgeSet& WES, const Standard_Boolean RevOri); |
561 | |
562 | //! Split faces of <S1> and store shells and faces in |
563 | //! the set <SS>. According to RevOri, reverse (or not) orientation. |
564 | Standard_EXPORT void FillSolid (const TopoDS_Shape& S1, const TopAbs_State TB1, const TopTools_ListOfShape& LS2, const TopAbs_State TB2, TopOpeBRepBuild_ShapeSet& SS, const Standard_Boolean RevOri); |
565 | |
566 | //! Split subshapes of <S1> and store subshapes in |
567 | //! the set <SS>. According to RevOri, reverse (or not) orientation. |
568 | Standard_EXPORT void FillShape (const TopoDS_Shape& S1, const TopAbs_State TB1, const TopTools_ListOfShape& LS2, const TopAbs_State TB2, TopOpeBRepBuild_ShapeSet& SS, const Standard_Boolean RevOri); |
569 | |
570 | //! fills the vertex set PVS with the point iterator IT. |
571 | //! IT accesses a list of interferences which geometry is a point or a vertex. |
572 | //! TB indicates the orientation to give to the geometries |
573 | //! found in interference list accessed by IT. |
574 | Standard_EXPORT void FillVertexSet (TopOpeBRepDS_PointIterator& IT, const TopAbs_State TB, TopOpeBRepBuild_PaveSet& PVS) const; |
575 | |
576 | //! fills vertex set PVS with the current value of IT. |
577 | //! I geometry is a point or a vertex. |
578 | //! TB indicates the orientation to give to geometries found I |
579 | Standard_EXPORT void FillVertexSetOnValue (const TopOpeBRepDS_PointIterator& IT, const TopAbs_State TB, TopOpeBRepBuild_PaveSet& PVS) const; |
580 | |
581 | //! Returns True if the shape <S> has not already been split |
582 | Standard_EXPORT Standard_Boolean ToSplit (const TopoDS_Shape& S, const TopAbs_State TB) const; |
583 | |
584 | //! add the shape <S> to the map of split shapes. |
585 | //! mark <S> as split/not split on <state>, according to B value. |
586 | Standard_EXPORT void MarkSplit (const TopoDS_Shape& S, const TopAbs_State TB, const Standard_Boolean B = Standard_True); |
587 | |
588 | //! Returns a ref. on the list of shapes connected to <S> as |
589 | //! <TB> merged parts of <S>. |
590 | Standard_EXPORT TopTools_ListOfShape& ChangeMerged (const TopoDS_Shape& S, const TopAbs_State TB); |
591 | |
592 | //! Returns a ref. on the vertex created on point <I>. |
593 | Standard_EXPORT TopoDS_Shape& ChangeNewVertex (const Standard_Integer I); |
594 | |
595 | //! Returns a ref. on the list of edges created on curve <I>. |
596 | Standard_EXPORT TopTools_ListOfShape& ChangeNewEdges (const Standard_Integer I); |
597 | |
598 | //! Returns a ref. on the list of faces created on surface <I>. |
599 | Standard_EXPORT TopTools_ListOfShape& ChangeNewFaces (const Standard_Integer I); |
600 | |
601 | Standard_EXPORT void AddIntersectionEdges (TopoDS_Shape& F, const TopAbs_State TB, const Standard_Boolean RevOri, TopOpeBRepBuild_ShapeSet& ES) const; |
602 | |
603 | Standard_EXPORT void UpdateSplitAndMerged (const TopTools_DataMapOfIntegerListOfShape& mle, const TopTools_DataMapOfIntegerShape& mre, const TopTools_DataMapOfShapeShape& mlf, const TopAbs_State state); |
604 | |
605 | |
606 | TopAbs_State myState1; |
607 | TopAbs_State myState2; |
608 | TopoDS_Shape myShape1; |
609 | TopoDS_Shape myShape2; |
610 | Handle(TopOpeBRepDS_HDataStructure) myDataStructure; |
611 | TopOpeBRepDS_BuildTool myBuildTool; |
612 | Handle(TopTools_HArray1OfShape) myNewVertices; |
613 | TopTools_DataMapOfIntegerListOfShape myNewEdges; |
614 | Handle(TopTools_HArray1OfListOfShape) myNewFaces; |
615 | TopOpeBRepDS_DataMapOfShapeListOfShapeOn1State mySplitIN; |
616 | TopOpeBRepDS_DataMapOfShapeListOfShapeOn1State mySplitON; |
617 | TopOpeBRepDS_DataMapOfShapeListOfShapeOn1State mySplitOUT; |
618 | TopOpeBRepDS_DataMapOfShapeListOfShapeOn1State myMergedIN; |
619 | TopOpeBRepDS_DataMapOfShapeListOfShapeOn1State myMergedON; |
620 | TopOpeBRepDS_DataMapOfShapeListOfShapeOn1State myMergedOUT; |
621 | TopTools_ListOfShape myEmptyShapeList; |
622 | TopTools_ListOfShape myListOfSolid; |
623 | TopTools_ListOfShape myListOfFace; |
624 | TopTools_ListOfShape myListOfEdge; |
625 | TopTools_DataMapOfShapeListOfShape myFSplits; |
626 | TopTools_DataMapOfShapeListOfShape myESplits; |
627 | Standard_Boolean mySectionDone; |
628 | Standard_Boolean mySplitSectionEdgesDone; |
629 | TopTools_ListOfShape mySection; |
630 | TopoDS_Solid mySolidReference; |
631 | TopoDS_Solid mySolidToFill; |
632 | TopTools_ListOfShape myFaceAvoid; |
633 | TopoDS_Face myFaceReference; |
634 | TopoDS_Face myFaceToFill; |
635 | TopTools_ListOfShape myEdgeAvoid; |
636 | TopoDS_Edge myEdgeReference; |
637 | TopoDS_Edge myEdgeToFill; |
638 | TopTools_ListOfShape myVertexAvoid; |
639 | TopTools_IndexedMapOfShape myMAP1; |
640 | TopTools_IndexedMapOfShape myMAP2; |
641 | Standard_Integer myIsKPart; |
642 | TopTools_DataMapOfShapeListOfShape myKPMAPf1f2; |
643 | Standard_Integer mySHASETindex; |
644 | Standard_Boolean myClassifyDef; |
645 | Standard_Boolean myClassifyVal; |
646 | TopOpeBRepTool_ShapeClassifier myShapeClassifier; |
647 | TopTools_MapOfShape myMemoSplit; |
648 | TCollection_AsciiString myEmptyAS; |
649 | Standard_Boolean myProcessON; |
650 | TopTools_IndexedDataMapOfShapeShape myONFacesMap; |
651 | TopTools_IndexedMapOfOrientedShape myONElemMap; |
652 | |
653 | |
654 | private: |
655 | |
656 | |
657 | |
658 | |
659 | |
660 | }; |
661 | |
662 | |
663 | |
664 | |
665 | |
666 | |
667 | |
668 | #endif // _TopOpeBRepBuild_Builder_HeaderFile |