0026715: Problems in reading STEP short names in complex entities
[occt.git] / src / RWStepDimTol / RWStepDimTol_RWGeoTolAndGeoTolWthDatRefAndUneqDisGeoTol.cxx
CommitLineData
28a73c1f 1// Created on: 2015-08-11
2// Created by: Irina KRYLOVA
3// Copyright (c) 2015 OPEN CASCADE SAS
4//
5// This file is part of Open CASCADE Technology software library.
6//
7// This library is free software; you can redistribute it and/or modify it under
8// the terms of the GNU Lesser General Public License version 2.1 as published
9// by the Free Software Foundation, with special exception defined in the file
10// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
11// distribution for complete text of the license and disclaimer of any warranty.
12//
13// Alternatively, this file may be used under the terms of Open CASCADE
14// commercial license or contractual agreement.
15
16
17#include <Interface_Check.hxx>
18#include <Interface_EntityIterator.hxx>
19#include <RWStepDimTol_RWGeoTolAndGeoTolWthDatRefAndUneqDisGeoTol.hxx>
20#include <StepBasic_LengthMeasureWithUnit.hxx>
21#include <StepBasic_MeasureWithUnit.hxx>
22#include <StepData_StepReaderData.hxx>
23#include <StepData_StepWriter.hxx>
24#include <StepDimTol_DatumReference.hxx>
25#include <StepDimTol_GeometricToleranceTarget.hxx>
26#include <StepDimTol_GeometricToleranceType.hxx>
27#include <StepDimTol_GeometricToleranceWithDatumReference.hxx>
28#include <StepDimTol_GeoTolAndGeoTolWthDatRefAndUneqDisGeoTol.hxx>
29#include <StepDimTol_HArray1OfDatumSystemOrReference.hxx>
30#include <StepDimTol_UnequallyDisposedGeometricTolerance.hxx>
31
32//=======================================================================
33//function : RWStepDimTol_RWGeoTolAndGeoTolWthDatRefAndUneqDisGeoTol
34//purpose :
35//=======================================================================
36RWStepDimTol_RWGeoTolAndGeoTolWthDatRefAndUneqDisGeoTol::RWStepDimTol_RWGeoTolAndGeoTolWthDatRefAndUneqDisGeoTol()
37{
38}
39
40
41//=======================================================================
42//function : ReadStep
43//purpose :
44//=======================================================================
45
46void RWStepDimTol_RWGeoTolAndGeoTolWthDatRefAndUneqDisGeoTol::ReadStep
47 (const Handle(StepData_StepReaderData)& data,
48 const Standard_Integer num0, Handle(Interface_Check)& ach,
49 const Handle(StepDimTol_GeoTolAndGeoTolWthDatRefAndUneqDisGeoTol)& ent) const
50{
51 Standard_Integer num = 0;//num0;
a7197ef3 52 data->NamedForComplex("GEOMETRIC_TOLERANCE","GMTTLR",num0,num,ach);
28a73c1f 53 if (!data->CheckNbParams(num,4,ach,"geometric_tolerance")) return;
54 // Own fields of GeometricTolerance
55 Handle(TCollection_HAsciiString) aName;
56 data->ReadString (num, 1, "name", ach, aName);
57 Handle(TCollection_HAsciiString) aDescription;
58 data->ReadString (num, 2, "description", ach, aDescription);
59 Handle(StepBasic_MeasureWithUnit) aMagnitude;
60 data->ReadEntity (num, 3, "magnitude", ach, STANDARD_TYPE(StepBasic_MeasureWithUnit), aMagnitude);
61 StepDimTol_GeometricToleranceTarget aTolerancedShapeAspect;
62 data->ReadEntity (num, 4, "toleranced_shape_aspect", ach, aTolerancedShapeAspect);
63
a7197ef3 64 data->NamedForComplex("GEOMETRIC_TOLERANCE_WITH_DATUM_REFERENCE","GTWDR",num0,num,ach);
28a73c1f 65 // Own fields of GeometricToleranceWithDatumReference
66 Handle(StepDimTol_HArray1OfDatumSystemOrReference) aDatumSystem;
67 Standard_Integer sub5 = 0;
68 if ( data->ReadSubList (num, 1, "datum_system", ach, sub5) ) {
69 Standard_Integer nb0 = data->NbParams(sub5);
70 aDatumSystem = new StepDimTol_HArray1OfDatumSystemOrReference (1, nb0);
71 Standard_Integer num2 = sub5;
72 for ( Standard_Integer i0=1; i0 <= nb0; i0++ ) {
73 StepDimTol_DatumSystemOrReference anIt0;
74 data->ReadEntity (num2, i0, "datum_system_or_reference", ach, anIt0);
75 aDatumSystem->SetValue(i0, anIt0);
76 }
77 }
78 // Initialize entity
79 Handle(StepDimTol_GeometricToleranceWithDatumReference) aGTWDR =
80 new StepDimTol_GeometricToleranceWithDatumReference;
81 aGTWDR->SetDatumSystem(aDatumSystem);
82
83 data->NamedForComplex("UNEQUALLY_DISPOSED_GEOMETRIC_TOLERANCE", num0, num, ach);
84 Handle (StepBasic_LengthMeasureWithUnit) aDisplacement;
85 data->ReadEntity(num, 1, "displacement", ach, STANDARD_TYPE(StepBasic_LengthMeasureWithUnit), aDisplacement);
86 //Initialize entity
87 Handle(StepDimTol_UnequallyDisposedGeometricTolerance) anUDGT = new
88 StepDimTol_UnequallyDisposedGeometricTolerance;
89 anUDGT->SetDisplacement(aDisplacement);
90
91 //Choose type of geometric tolerance
92 TColStd_SequenceOfAsciiString aTypes;
93 data->ComplexType(num0, aTypes);
94 Standard_CString aFirst = aTypes.First().ToCString();
95 Standard_CString aLast = aTypes.Value(3).ToCString();
96 StepDimTol_GeometricToleranceType aType = StepDimTol_GTTPositionTolerance;
97 if (strcmp(aFirst, "ANGULARITY_TOLERANCE") == 0) aType = StepDimTol_GTTAngularityTolerance;
98 else if (strcmp(aFirst, "CIRCULAR_RUNOUT_TOLERANCE") == 0) aType = StepDimTol_GTTCircularRunoutTolerance;
99 else if (strcmp(aFirst, "COAXIALITY_TOLERANCE") == 0) aType = StepDimTol_GTTCoaxialityTolerance;
100 else if (strcmp(aFirst, "CONCENTRICITY_TOLERANCE") == 0) aType = StepDimTol_GTTConcentricityTolerance;
101 else if (strcmp(aFirst, "CYLINDRICITY_TOLERANCE") == 0) aType = StepDimTol_GTTCylindricityTolerance;
102 else if (strcmp(aFirst, "FLATNESS_TOLERANCE") == 0) aType = StepDimTol_GTTFlatnessTolerance;
103 else if (strcmp(aLast, "LINE_PROFILE_TOLERANCE") == 0) aType = StepDimTol_GTTLineProfileTolerance;
104 else if (strcmp(aLast, "PARALLELISM_TOLERANCE") == 0) aType = StepDimTol_GTTParallelismTolerance;
105 else if (strcmp(aLast, "PERPENDICULARITY_TOLERANCE") == 0) aType = StepDimTol_GTTPerpendicularityTolerance;
106 else if (strcmp(aLast, "POSITION_TOLERANCE") == 0) aType = StepDimTol_GTTPositionTolerance;
107 else if (strcmp(aLast, "ROUNDNESS_TOLERANCE") == 0) aType = StepDimTol_GTTRoundnessTolerance;
108 else if (strcmp(aLast, "STRAIGHTNESS_TOLERANCE") == 0) aType = StepDimTol_GTTStraightnessTolerance;
109 else if (strcmp(aLast, "SURFACE_PROFILE_TOLERANCE") == 0) aType = StepDimTol_GTTSurfaceProfileTolerance;
110 else if (strcmp(aLast, "SYMMETRY_TOLERANCE") == 0) aType = StepDimTol_GTTSymmetryTolerance;
111 else if (strcmp(aLast, "TOTAL_RUNOUT_TOLERANCE") == 0) aType = StepDimTol_GTTTotalRunoutTolerance;
112 else ach->AddFail("The type of geometric tolerance is not supported");
113
114 // Initialize entity
115 ent->Init(aName, aDescription, aMagnitude, aTolerancedShapeAspect, aGTWDR, aType, anUDGT);
116}
117
118
119//=======================================================================
120//function : WriteStep
121//purpose :
122//=======================================================================
123
124void RWStepDimTol_RWGeoTolAndGeoTolWthDatRefAndUneqDisGeoTol::WriteStep
125 (StepData_StepWriter& SW,
126 const Handle(StepDimTol_GeoTolAndGeoTolWthDatRefAndUneqDisGeoTol)& ent) const
127{
128 StepDimTol_GeometricToleranceType aType = ent->GetToleranceType();
129 if (aType == StepDimTol_GTTAngularityTolerance)
130 SW.StartEntity("ANGULARITY_TOLERANCE");
131 else if (aType == StepDimTol_GTTCircularRunoutTolerance)
132 SW.StartEntity("CIRCULAR_RUNOUT_TOLERANCE");
133 else if (aType == StepDimTol_GTTCoaxialityTolerance)
134 SW.StartEntity("COAXIALITY_TOLERANCE");
135 else if (aType == StepDimTol_GTTConcentricityTolerance)
136 SW.StartEntity("CONCENTRICITY_TOLERANCE");
137 else if (aType == StepDimTol_GTTCylindricityTolerance)
138 SW.StartEntity("CYLINDRICITY_TOLERANCE");
139 else if (aType == StepDimTol_GTTFlatnessTolerance)
140 SW.StartEntity("FLATNESS_TOLERANCE");
141
142 SW.StartEntity("GEOMETRIC_TOLERANCE");
143 SW.Send(ent->Name());
144 SW.Send(ent->Description());
145 SW.Send(ent->Magnitude());
146 SW.Send(ent->TolerancedShapeAspect().Value());
147 SW.StartEntity("GEOMETRIC_TOLERANCE_WITH_DATUM_REFERENCE");
148 SW.OpenSub();
149 for(Standard_Integer i4=1; i4<=ent->GetGeometricToleranceWithDatumReference()->DatumSystemAP242()->Length(); i4++) {
150 StepDimTol_DatumSystemOrReference Var0 =
151 ent->GetGeometricToleranceWithDatumReference()->DatumSystemAP242()->Value(i4);
152 SW.Send(Var0.Value());
153 }
154 SW.CloseSub();
155
156 if (aType == StepDimTol_GTTLineProfileTolerance)
157 SW.StartEntity("LINE_PROFILE_TOLERANCE");
158 else if (aType == StepDimTol_GTTParallelismTolerance)
159 SW.StartEntity("PARALLELISM_TOLERANCE");
160 else if (aType == StepDimTol_GTTPerpendicularityTolerance)
161 SW.StartEntity("PERPENDICULARITY_TOLERANCE");
162 else if (aType == StepDimTol_GTTPositionTolerance)
163 SW.StartEntity("POSITION_TOLERANCE");
164 else if (aType == StepDimTol_GTTRoundnessTolerance)
165 SW.StartEntity("ROUNDNESS_TOLERANCE");
166 else if (aType == StepDimTol_GTTStraightnessTolerance)
167 SW.StartEntity("STRAIGHTNESS_TOLERANCE");
168 else if (aType == StepDimTol_GTTSurfaceProfileTolerance)
169 SW.StartEntity("SURFACE_PROFILE_TOLERANCE");
170 else if (aType == StepDimTol_GTTSymmetryTolerance)
171 SW.StartEntity("SYMMETRY_TOLERANCE");
172 else if (aType == StepDimTol_GTTTotalRunoutTolerance)
173 SW.StartEntity("TOTAL_RUNOUT_TOLERANCE");
174
175 SW.StartEntity("UNEQUALLY_DISPOSED_GEOMETRIC_TOLRANCE");
176 SW.Send(ent->GetUnequallyDisposedGeometricTolerance()->Displacement());
177}
178
179
180//=======================================================================
181//function : Share
182//purpose :
183//=======================================================================
184
185void RWStepDimTol_RWGeoTolAndGeoTolWthDatRefAndUneqDisGeoTol::Share
186 (const Handle(StepDimTol_GeoTolAndGeoTolWthDatRefAndUneqDisGeoTol)& ent,
187 Interface_EntityIterator& iter) const
188{
189 // Own fields of GeometricTolerance
190 iter.AddItem (ent->Magnitude());
191 iter.AddItem (ent->TolerancedShapeAspect().Value());
192 // Own fields of GeometricToleranceWithDatumReference
193 for (Standard_Integer i3=1; i3<=ent->GetGeometricToleranceWithDatumReference()->DatumSystemAP242()->Length(); i3++ ) {
194 StepDimTol_DatumSystemOrReference Var0 = ent->GetGeometricToleranceWithDatumReference()->DatumSystemAP242()->Value(i3);
195 iter.AddItem (Var0.Value());
196 }
197}