28a73c1f |
1 | // Created on: 2015-08-10 |
2 | // Created by: Irina KRYLOVA |
3 | // Copyright (c) 2015 OPEN CASCADE SAS |
4 | // |
5 | // This file is part of Open CASCADE Technology software library. |
6 | // |
7 | // This library is free software; you can redistribute it and/or modify it under |
8 | // the terms of the GNU Lesser General Public License version 2.1 as published |
9 | // by the Free Software Foundation, with special exception defined in the file |
10 | // OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT |
11 | // distribution for complete text of the license and disclaimer of any warranty. |
12 | // |
13 | // Alternatively, this file may be used under the terms of Open CASCADE |
14 | // commercial license or contractual agreement. |
15 | |
16 | |
17 | #include <Interface_Check.hxx> |
18 | #include <Interface_EntityIterator.hxx> |
19 | #include <RWStepDimTol_RWGeoTolAndGeoTolWthDatRefAndGeoTolWthMod.hxx> |
20 | #include <StepBasic_MeasureWithUnit.hxx> |
21 | #include <StepData_StepReaderData.hxx> |
22 | #include <StepData_StepWriter.hxx> |
23 | #include <StepDimTol_DatumReference.hxx> |
24 | #include <StepDimTol_GeometricToleranceTarget.hxx> |
25 | #include <StepDimTol_GeometricToleranceType.hxx> |
26 | #include <StepDimTol_GeometricToleranceWithDatumReference.hxx> |
27 | #include <StepDimTol_GeoTolAndGeoTolWthDatRefAndGeoTolWthMod.hxx> |
28 | #include <StepDimTol_HArray1OfDatumSystemOrReference.hxx> |
29 | #include <StepDimTol_GeometricToleranceWithModifiers.hxx> |
30 | |
31 | //======================================================================= |
32 | //function : RWStepDimTol_RWGeoTolAndGeoTolWthDatRefAndGeoTolWthMod |
33 | //purpose : |
34 | //======================================================================= |
35 | RWStepDimTol_RWGeoTolAndGeoTolWthDatRefAndGeoTolWthMod::RWStepDimTol_RWGeoTolAndGeoTolWthDatRefAndGeoTolWthMod() |
36 | { |
37 | } |
38 | |
39 | |
40 | //======================================================================= |
41 | //function : ReadStep |
42 | //purpose : |
43 | //======================================================================= |
44 | |
45 | void RWStepDimTol_RWGeoTolAndGeoTolWthDatRefAndGeoTolWthMod::ReadStep |
46 | (const Handle(StepData_StepReaderData)& data, |
47 | const Standard_Integer num0, Handle(Interface_Check)& ach, |
48 | const Handle(StepDimTol_GeoTolAndGeoTolWthDatRefAndGeoTolWthMod)& ent) const |
49 | { |
50 | Standard_Integer num = 0;//num0; |
a7197ef3 |
51 | data->NamedForComplex("GEOMETRIC_TOLERANCE","GMTTLR",num0,num,ach); |
28a73c1f |
52 | if (!data->CheckNbParams(num,4,ach,"geometric_tolerance")) return; |
53 | // Own fields of GeometricTolerance |
54 | Handle(TCollection_HAsciiString) aName; |
55 | data->ReadString (num, 1, "name", ach, aName); |
56 | Handle(TCollection_HAsciiString) aDescription; |
57 | data->ReadString (num, 2, "description", ach, aDescription); |
58 | Handle(StepBasic_MeasureWithUnit) aMagnitude; |
59 | data->ReadEntity (num, 3, "magnitude", ach, STANDARD_TYPE(StepBasic_MeasureWithUnit), aMagnitude); |
60 | StepDimTol_GeometricToleranceTarget aTolerancedShapeAspect; |
61 | data->ReadEntity (num, 4, "toleranced_shape_aspect", ach, aTolerancedShapeAspect); |
62 | |
a7197ef3 |
63 | data->NamedForComplex("GEOMETRIC_TOLERANCE_WITH_DATUM_REFERENCE","GTWDR",num0,num,ach); |
28a73c1f |
64 | // Own fields of GeometricToleranceWithDatumReference |
65 | Handle(StepDimTol_HArray1OfDatumSystemOrReference) aDatumSystem; |
66 | Standard_Integer sub5 = 0; |
67 | if ( data->ReadSubList (num, 1, "datum_system", ach, sub5) ) { |
68 | Standard_Integer nb0 = data->NbParams(sub5); |
69 | aDatumSystem = new StepDimTol_HArray1OfDatumSystemOrReference (1, nb0); |
70 | Standard_Integer num2 = sub5; |
71 | for ( Standard_Integer i0=1; i0 <= nb0; i0++ ) { |
72 | StepDimTol_DatumSystemOrReference anIt0; |
73 | data->ReadEntity (num2, i0, "datum_system_or_reference", ach, anIt0); |
74 | aDatumSystem->SetValue(i0, anIt0); |
75 | } |
76 | } |
77 | // Initialize entity |
78 | Handle(StepDimTol_GeometricToleranceWithDatumReference) aGTWDR = |
79 | new StepDimTol_GeometricToleranceWithDatumReference; |
80 | aGTWDR->SetDatumSystem(aDatumSystem); |
81 | |
82 | data->NamedForComplex("GEOMETRIC_TOLERANCE_WITH_MODIFIERS",num0,num,ach); |
83 | // Own fields of ModifiedGeometricTolerance |
84 | Handle(StepDimTol_HArray1OfGeometricToleranceModifier) aModifiers; |
85 | Standard_Integer sub = 0; |
86 | if ( data->ReadSubList (num, 1, "modifiers", ach, sub) ) { |
51663cb4 |
87 | Standard_Integer nb0 = data->NbParams(sub); |
28a73c1f |
88 | aModifiers = new StepDimTol_HArray1OfGeometricToleranceModifier (1, nb0); |
89 | Standard_Integer num2 = sub; |
90 | for ( Standard_Integer i0=1; i0 <= nb0; i0++ ) { |
91 | StepDimTol_GeometricToleranceModifier anIt0 = StepDimTol_GTMMaximumMaterialRequirement; |
92 | if (data->ParamType (num2, i0) == Interface_ParamEnum) { |
93 | Standard_CString text = data->ParamCValue(num2, i0); |
94 | if (strcmp(text, ".ANY_CROSS_SECTION.")==0) anIt0 = StepDimTol_GTMAnyCrossSection; |
95 | else if (strcmp(text, ".COMMON_ZONE.")==0) anIt0 = StepDimTol_GTMCommonZone; |
96 | else if (strcmp(text, ".EACH_RADIAL_ELEMENT.")==0) anIt0 = StepDimTol_GTMEachRadialElement; |
97 | else if (strcmp(text, ".FREE_STATE.")==0) anIt0 = StepDimTol_GTMFreeState; |
98 | else if (strcmp(text, ".LEAST_MATERIAL_REQUIREMENT.")==0) anIt0 = StepDimTol_GTMLeastMaterialRequirement; |
99 | else if (strcmp(text, ".LINE_ELEMENT.")==0) anIt0 = StepDimTol_GTMLineElement; |
100 | else if (strcmp(text, ".MAJOR_DIAMETER.")==0) anIt0 = StepDimTol_GTMMajorDiameter; |
101 | else if (strcmp(text, ".MAXIMUM_MATERIAL_REQUIREMENT.")==0) anIt0 = StepDimTol_GTMMaximumMaterialRequirement; |
102 | else if (strcmp(text, ".MINOR_DIAMETER.")==0) anIt0 = StepDimTol_GTMMinorDiameter; |
103 | else if (strcmp(text, ".NOT_CONVEX.")==0) anIt0 = StepDimTol_GTMNotConvex; |
104 | else if (strcmp(text, ".PITCH_DIAMETER.")==0) anIt0 = StepDimTol_GTMPitchDiameter; |
105 | else if (strcmp(text, ".RECIPROCITY_REQUIREMENT.")==0) anIt0 = StepDimTol_GTMReciprocityRequirement; |
106 | else if (strcmp(text, ".SEPARATE_REQUIREMENT.")==0) anIt0 = StepDimTol_GTMSeparateRequirement; |
107 | else if (strcmp(text, ".STATISTICAL_TOLERANCE.")==0) anIt0 = StepDimTol_GTMStatisticalTolerance; |
108 | else if (strcmp(text, ".TANGENT_PLANE.")==0) anIt0 = StepDimTol_GTMTangentPlane; |
109 | else ach->AddFail("Parameter #5 (modifiers) has not allowed value"); |
110 | } |
111 | else ach->AddFail("Parameter #5 (modifier) is not set of enumerations"); |
112 | aModifiers->SetValue(i0, anIt0); |
113 | } |
114 | } |
115 | Handle(StepDimTol_GeometricToleranceWithModifiers) aGTWM = new StepDimTol_GeometricToleranceWithModifiers; |
116 | aGTWM->SetModifiers(aModifiers); |
117 | |
118 | //Choose type of geometric tolerance |
119 | TColStd_SequenceOfAsciiString aTypes; |
120 | data->ComplexType(num0, aTypes); |
121 | Standard_CString aFirst = aTypes.First().ToCString(); |
122 | Standard_CString aLast = aTypes.Last().ToCString(); |
123 | StepDimTol_GeometricToleranceType aType = StepDimTol_GTTPositionTolerance; |
124 | if (strcmp(aFirst, "ANGULARITY_TOLERANCE") == 0) aType = StepDimTol_GTTAngularityTolerance; |
125 | else if (strcmp(aFirst, "CIRCULAR_RUNOUT_TOLERANCE") == 0) aType = StepDimTol_GTTCircularRunoutTolerance; |
126 | else if (strcmp(aFirst, "COAXIALITY_TOLERANCE") == 0) aType = StepDimTol_GTTCoaxialityTolerance; |
127 | else if (strcmp(aFirst, "CONCENTRICITY_TOLERANCE") == 0) aType = StepDimTol_GTTConcentricityTolerance; |
128 | else if (strcmp(aFirst, "CYLINDRICITY_TOLERANCE") == 0) aType = StepDimTol_GTTCylindricityTolerance; |
129 | else if (strcmp(aFirst, "FLATNESS_TOLERANCE") == 0) aType = StepDimTol_GTTFlatnessTolerance; |
130 | else if (strcmp(aLast, "LINE_PROFILE_TOLERANCE") == 0) aType = StepDimTol_GTTLineProfileTolerance; |
131 | else if (strcmp(aLast, "PARALLELISM_TOLERANCE") == 0) aType = StepDimTol_GTTParallelismTolerance; |
132 | else if (strcmp(aLast, "PERPENDICULARITY_TOLERANCE") == 0) aType = StepDimTol_GTTPerpendicularityTolerance; |
133 | else if (strcmp(aLast, "POSITION_TOLERANCE") == 0) aType = StepDimTol_GTTPositionTolerance; |
134 | else if (strcmp(aLast, "ROUNDNESS_TOLERANCE") == 0) aType = StepDimTol_GTTRoundnessTolerance; |
135 | else if (strcmp(aLast, "STRAIGHTNESS_TOLERANCE") == 0) aType = StepDimTol_GTTStraightnessTolerance; |
136 | else if (strcmp(aLast, "SURFACE_PROFILE_TOLERANCE") == 0) aType = StepDimTol_GTTSurfaceProfileTolerance; |
137 | else if (strcmp(aLast, "SYMMETRY_TOLERANCE") == 0) aType = StepDimTol_GTTSymmetryTolerance; |
138 | else if (strcmp(aLast, "TOTAL_RUNOUT_TOLERANCE") == 0) aType = StepDimTol_GTTTotalRunoutTolerance; |
139 | else ach->AddFail("The type of geometric tolerance is not supported"); |
140 | |
141 | // Initialize entity |
142 | ent->Init(aName, aDescription, aMagnitude, aTolerancedShapeAspect, aGTWDR, aGTWM, aType); |
143 | |
144 | } |
145 | |
146 | |
147 | //======================================================================= |
148 | //function : WriteStep |
149 | //purpose : |
150 | //======================================================================= |
151 | |
152 | void RWStepDimTol_RWGeoTolAndGeoTolWthDatRefAndGeoTolWthMod::WriteStep |
153 | (StepData_StepWriter& SW, |
154 | const Handle(StepDimTol_GeoTolAndGeoTolWthDatRefAndGeoTolWthMod)& ent) const |
155 | { |
156 | StepDimTol_GeometricToleranceType aType = ent->GetToleranceType(); |
157 | if (aType == StepDimTol_GTTAngularityTolerance) |
158 | SW.StartEntity("ANGULARITY_TOLERANCE"); |
159 | else if (aType == StepDimTol_GTTCircularRunoutTolerance) |
160 | SW.StartEntity("CIRCULAR_RUNOUT_TOLERANCE"); |
161 | else if (aType == StepDimTol_GTTCoaxialityTolerance) |
162 | SW.StartEntity("COAXIALITY_TOLERANCE"); |
163 | else if (aType == StepDimTol_GTTConcentricityTolerance) |
164 | SW.StartEntity("CONCENTRICITY_TOLERANCE"); |
165 | else if (aType == StepDimTol_GTTCylindricityTolerance) |
166 | SW.StartEntity("CYLINDRICITY_TOLERANCE"); |
167 | else if (aType == StepDimTol_GTTFlatnessTolerance) |
168 | SW.StartEntity("FLATNESS_TOLERANCE"); |
169 | |
170 | SW.StartEntity("GEOMETRIC_TOLERANCE"); |
171 | SW.Send(ent->Name()); |
172 | SW.Send(ent->Description()); |
173 | SW.Send(ent->Magnitude()); |
174 | SW.Send(ent->TolerancedShapeAspect().Value()); |
175 | SW.StartEntity("GEOMETRIC_TOLERANCE_WITH_DATUM_REFERENCE"); |
176 | SW.OpenSub(); |
177 | for(Standard_Integer i4=1; i4<=ent->GetGeometricToleranceWithDatumReference()->DatumSystemAP242()->Length(); i4++) { |
178 | StepDimTol_DatumSystemOrReference Var0 = |
179 | ent->GetGeometricToleranceWithDatumReference()->DatumSystemAP242()->Value(i4); |
180 | SW.Send(Var0.Value()); |
181 | } |
182 | SW.CloseSub(); |
183 | |
6595eee7 |
184 | SW.StartEntity("GEOMETRIC_TOLERANCE_WITH_MODIFIERS"); |
185 | SW.OpenSub(); |
186 | Handle(StepDimTol_GeometricToleranceWithModifiers) aGTWM = ent->GetGeometricToleranceWithModifiers(); |
187 | for (Standard_Integer i = 1; i <= aGTWM->NbModifiers(); i++) { |
188 | switch (aGTWM->ModifierValue(i)) { |
189 | case StepDimTol_GTMAnyCrossSection: SW.SendEnum (".ANY_CROSS_SECTION."); break; |
190 | case StepDimTol_GTMCommonZone: SW.SendEnum (".COMMON_ZONE."); break; |
191 | case StepDimTol_GTMEachRadialElement: SW.SendEnum (".EACH_RADIAL_ELEMENT."); break; |
192 | case StepDimTol_GTMFreeState: SW.SendEnum (".FREE_STATE."); break; |
193 | case StepDimTol_GTMLeastMaterialRequirement: SW.SendEnum (".LEAST_MATERIAL_REQUIREMENT."); break; |
194 | case StepDimTol_GTMLineElement: SW.SendEnum (".LINE_ELEMENT."); break; |
195 | case StepDimTol_GTMMajorDiameter: SW.SendEnum (".MAJOR_DIAMETER."); break; |
196 | case StepDimTol_GTMMaximumMaterialRequirement: SW.SendEnum (".MAXIMUM_MATERIAL_REQUIREMENT."); break; |
197 | case StepDimTol_GTMMinorDiameter: SW.SendEnum (".MINOR_DIAMETER."); break; |
198 | case StepDimTol_GTMNotConvex: SW.SendEnum (".NOT_CONVEX."); break; |
199 | case StepDimTol_GTMPitchDiameter: SW.SendEnum (".PITCH_DIAMETER."); break; |
200 | case StepDimTol_GTMReciprocityRequirement: SW.SendEnum (".RECIPROCITY_REQUIREMENT."); break; |
201 | case StepDimTol_GTMSeparateRequirement: SW.SendEnum (".SEPARATE_REQUIREMENT."); break; |
202 | case StepDimTol_GTMStatisticalTolerance: SW.SendEnum (".STATISTICAL_TOLERANCE."); break; |
203 | case StepDimTol_GTMTangentPlane: SW.SendEnum (".TANGENT_PLANE."); break; |
204 | } |
205 | } |
206 | SW.CloseSub(); |
207 | |
28a73c1f |
208 | if (aType == StepDimTol_GTTLineProfileTolerance) |
209 | SW.StartEntity("LINE_PROFILE_TOLERANCE"); |
210 | else if (aType == StepDimTol_GTTParallelismTolerance) |
211 | SW.StartEntity("PARALLELISM_TOLERANCE"); |
212 | else if (aType == StepDimTol_GTTPerpendicularityTolerance) |
213 | SW.StartEntity("PERPENDICULARITY_TOLERANCE"); |
214 | else if (aType == StepDimTol_GTTPositionTolerance) |
215 | SW.StartEntity("POSITION_TOLERANCE"); |
216 | else if (aType == StepDimTol_GTTRoundnessTolerance) |
217 | SW.StartEntity("ROUNDNESS_TOLERANCE"); |
218 | else if (aType == StepDimTol_GTTStraightnessTolerance) |
219 | SW.StartEntity("STRAIGHTNESS_TOLERANCE"); |
220 | else if (aType == StepDimTol_GTTSurfaceProfileTolerance) |
221 | SW.StartEntity("SURFACE_PROFILE_TOLERANCE"); |
222 | else if (aType == StepDimTol_GTTSymmetryTolerance) |
223 | SW.StartEntity("SYMMETRY_TOLERANCE"); |
224 | else if (aType == StepDimTol_GTTTotalRunoutTolerance) |
225 | SW.StartEntity("TOTAL_RUNOUT_TOLERANCE"); |
226 | } |
227 | |
228 | |
229 | //======================================================================= |
230 | //function : Share |
231 | //purpose : |
232 | //======================================================================= |
233 | |
234 | void RWStepDimTol_RWGeoTolAndGeoTolWthDatRefAndGeoTolWthMod::Share |
235 | (const Handle(StepDimTol_GeoTolAndGeoTolWthDatRefAndGeoTolWthMod)& ent, |
236 | Interface_EntityIterator& iter) const |
237 | { |
238 | // Own fields of GeometricTolerance |
239 | iter.AddItem (ent->Magnitude()); |
240 | iter.AddItem (ent->TolerancedShapeAspect().Value()); |
241 | // Own fields of GeometricToleranceWithDatumReference |
242 | for (Standard_Integer i3=1; i3<=ent->GetGeometricToleranceWithDatumReference()->DatumSystemAP242()->Length(); i3++ ) { |
243 | StepDimTol_DatumSystemOrReference Var0 = ent->GetGeometricToleranceWithDatumReference()->DatumSystemAP242()->Value(i3); |
244 | iter.AddItem (Var0.Value()); |
245 | } |
246 | } |