0026859: Export of GDT from XCAF to STEP
[occt.git] / src / RWStepDimTol / RWStepDimTol_RWGeoTolAndGeoTolWthDatRefAndGeoTolWthMaxTol.cxx
CommitLineData
6595eee7 1// Created on: 2015-11-13
2// Created by: Irina KRYLOVA
3// Copyright (c) 2015 OPEN CASCADE SAS
4//
5// This file is part of Open CASCADE Technology software library.
6//
7// This library is free software; you can redistribute it and/or modify it under
8// the terms of the GNU Lesser General Public License version 2.1 as published
9// by the Free Software Foundation, with special exception defined in the file
10// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
11// distribution for complete text of the license and disclaimer of any warranty.
12//
13// Alternatively, this file may be used under the terms of Open CASCADE
14// commercial license or contractual agreement.
15
16
17#include <Interface_Check.hxx>
18#include <Interface_EntityIterator.hxx>
19#include <RWStepDimTol_RWGeoTolAndGeoTolWthDatRefAndGeoTolWthMaxTol.hxx>
20#include <StepBasic_LengthMeasureWithUnit.hxx>
21#include <StepBasic_MeasureWithUnit.hxx>
22#include <StepData_StepReaderData.hxx>
23#include <StepData_StepWriter.hxx>
24#include <StepDimTol_DatumReference.hxx>
25#include <StepDimTol_GeometricToleranceTarget.hxx>
26#include <StepDimTol_GeometricToleranceType.hxx>
27#include <StepDimTol_GeometricToleranceWithDatumReference.hxx>
28#include <StepDimTol_GeoTolAndGeoTolWthDatRefAndGeoTolWthMaxTol.hxx>
29#include <StepDimTol_HArray1OfDatumSystemOrReference.hxx>
30#include <StepDimTol_GeometricToleranceWithModifiers.hxx>
31
32//=======================================================================
33//function : RWStepDimTol_RWGeoTolAndGeoTolWthDatRefAndGeoTolWthMaxTol
34//purpose :
35//=======================================================================
36RWStepDimTol_RWGeoTolAndGeoTolWthDatRefAndGeoTolWthMaxTol::RWStepDimTol_RWGeoTolAndGeoTolWthDatRefAndGeoTolWthMaxTol()
37{
38}
39
40
41//=======================================================================
42//function : ReadStep
43//purpose :
44//=======================================================================
45
46void RWStepDimTol_RWGeoTolAndGeoTolWthDatRefAndGeoTolWthMaxTol::ReadStep
47 (const Handle(StepData_StepReaderData)& data,
48 const Standard_Integer num0, Handle(Interface_Check)& ach,
49 const Handle(StepDimTol_GeoTolAndGeoTolWthDatRefAndGeoTolWthMaxTol)& ent) const
50{
51 Standard_Integer num = 0;//num0;
52 data->NamedForComplex("GEOMETRIC_TOLERANCE","GMTTLR",num0,num,ach);
53 if (!data->CheckNbParams(num,4,ach,"geometric_tolerance")) return;
54 // Own fields of GeometricTolerance
55 Handle(TCollection_HAsciiString) aName;
56 data->ReadString (num, 1, "name", ach, aName);
57 Handle(TCollection_HAsciiString) aDescription;
58 data->ReadString (num, 2, "description", ach, aDescription);
59 Handle(StepBasic_MeasureWithUnit) aMagnitude;
60 data->ReadEntity (num, 3, "magnitude", ach, STANDARD_TYPE(StepBasic_MeasureWithUnit), aMagnitude);
61 StepDimTol_GeometricToleranceTarget aTolerancedShapeAspect;
62 data->ReadEntity (num, 4, "toleranced_shape_aspect", ach, aTolerancedShapeAspect);
63
64 data->NamedForComplex("GEOMETRIC_TOLERANCE_WITH_DATUM_REFERENCE","GTWDR",num0,num,ach);
65 // Own fields of GeometricToleranceWithDatumReference
66 Handle(StepDimTol_HArray1OfDatumSystemOrReference) aDatumSystem;
67 Standard_Integer sub5 = 0;
68 if ( data->ReadSubList (num, 1, "datum_system", ach, sub5) ) {
69 Standard_Integer nb0 = data->NbParams(sub5);
70 aDatumSystem = new StepDimTol_HArray1OfDatumSystemOrReference (1, nb0);
71 Standard_Integer num2 = sub5;
72 for ( Standard_Integer i0=1; i0 <= nb0; i0++ ) {
73 StepDimTol_DatumSystemOrReference anIt0;
74 data->ReadEntity (num2, i0, "datum_system_or_reference", ach, anIt0);
75 aDatumSystem->SetValue(i0, anIt0);
76 }
77 }
78 // Initialize entity
79 Handle(StepDimTol_GeometricToleranceWithDatumReference) aGTWDR =
80 new StepDimTol_GeometricToleranceWithDatumReference;
81 aGTWDR->SetDatumSystem(aDatumSystem);
82
83 data->NamedForComplex("GEOMETRIC_TOLERANCE_WITH_MAXIMUM_TOLERANCE",num0,num,ach);
84 Handle(StepBasic_LengthMeasureWithUnit) aMaxTol;
85 data->ReadEntity (num, 1, "maximum_upper_tolerance", ach, STANDARD_TYPE(StepBasic_LengthMeasureWithUnit), aMaxTol);
86
87 data->NamedForComplex("GEOMETRIC_TOLERANCE_WITH_MODIFIERS",num0,num,ach);
88 // Own fields of ModifiedGeometricTolerance
89 Handle(StepDimTol_HArray1OfGeometricToleranceModifier) aModifiers;
90 Standard_Integer sub = 0;
91 if ( data->ReadSubList (num, 1, "modifiers", ach, sub) ) {
92 Standard_Integer nb0 = data->NbParams(sub5);
93 aModifiers = new StepDimTol_HArray1OfGeometricToleranceModifier (1, nb0);
94 Standard_Integer num2 = sub;
95 for ( Standard_Integer i0=1; i0 <= nb0; i0++ ) {
96 StepDimTol_GeometricToleranceModifier anIt0 = StepDimTol_GTMMaximumMaterialRequirement;
97 if (data->ParamType (num2, i0) == Interface_ParamEnum) {
98 Standard_CString text = data->ParamCValue(num2, i0);
99 if (strcmp(text, ".ANY_CROSS_SECTION.")==0) anIt0 = StepDimTol_GTMAnyCrossSection;
100 else if (strcmp(text, ".COMMON_ZONE.")==0) anIt0 = StepDimTol_GTMCommonZone;
101 else if (strcmp(text, ".EACH_RADIAL_ELEMENT.")==0) anIt0 = StepDimTol_GTMEachRadialElement;
102 else if (strcmp(text, ".FREE_STATE.")==0) anIt0 = StepDimTol_GTMFreeState;
103 else if (strcmp(text, ".LEAST_MATERIAL_REQUIREMENT.")==0) anIt0 = StepDimTol_GTMLeastMaterialRequirement;
104 else if (strcmp(text, ".LINE_ELEMENT.")==0) anIt0 = StepDimTol_GTMLineElement;
105 else if (strcmp(text, ".MAJOR_DIAMETER.")==0) anIt0 = StepDimTol_GTMMajorDiameter;
106 else if (strcmp(text, ".MAXIMUM_MATERIAL_REQUIREMENT.")==0) anIt0 = StepDimTol_GTMMaximumMaterialRequirement;
107 else if (strcmp(text, ".MINOR_DIAMETER.")==0) anIt0 = StepDimTol_GTMMinorDiameter;
108 else if (strcmp(text, ".NOT_CONVEX.")==0) anIt0 = StepDimTol_GTMNotConvex;
109 else if (strcmp(text, ".PITCH_DIAMETER.")==0) anIt0 = StepDimTol_GTMPitchDiameter;
110 else if (strcmp(text, ".RECIPROCITY_REQUIREMENT.")==0) anIt0 = StepDimTol_GTMReciprocityRequirement;
111 else if (strcmp(text, ".SEPARATE_REQUIREMENT.")==0) anIt0 = StepDimTol_GTMSeparateRequirement;
112 else if (strcmp(text, ".STATISTICAL_TOLERANCE.")==0) anIt0 = StepDimTol_GTMStatisticalTolerance;
113 else if (strcmp(text, ".TANGENT_PLANE.")==0) anIt0 = StepDimTol_GTMTangentPlane;
114 else ach->AddFail("Parameter #5 (modifiers) has not allowed value");
115 }
116 else ach->AddFail("Parameter #5 (modifier) is not set of enumerations");
117 aModifiers->SetValue(i0, anIt0);
118 }
119 }
120 Handle(StepDimTol_GeometricToleranceWithModifiers) aGTWM = new StepDimTol_GeometricToleranceWithModifiers;
121 aGTWM->SetModifiers(aModifiers);
122
123 //Choose type of geometric tolerance
124 TColStd_SequenceOfAsciiString aTypes;
125 data->ComplexType(num0, aTypes);
126 Standard_CString aFirst = aTypes.First().ToCString();
127 Standard_CString aLast = aTypes.Last().ToCString();
128 StepDimTol_GeometricToleranceType aType = StepDimTol_GTTPositionTolerance;
129 if (strcmp(aFirst, "ANGULARITY_TOLERANCE") == 0) aType = StepDimTol_GTTAngularityTolerance;
130 else if (strcmp(aFirst, "CIRCULAR_RUNOUT_TOLERANCE") == 0) aType = StepDimTol_GTTCircularRunoutTolerance;
131 else if (strcmp(aFirst, "COAXIALITY_TOLERANCE") == 0) aType = StepDimTol_GTTCoaxialityTolerance;
132 else if (strcmp(aFirst, "CONCENTRICITY_TOLERANCE") == 0) aType = StepDimTol_GTTConcentricityTolerance;
133 else if (strcmp(aFirst, "CYLINDRICITY_TOLERANCE") == 0) aType = StepDimTol_GTTCylindricityTolerance;
134 else if (strcmp(aFirst, "FLATNESS_TOLERANCE") == 0) aType = StepDimTol_GTTFlatnessTolerance;
135 else if (strcmp(aLast, "LINE_PROFILE_TOLERANCE") == 0) aType = StepDimTol_GTTLineProfileTolerance;
136 else if (strcmp(aLast, "PARALLELISM_TOLERANCE") == 0) aType = StepDimTol_GTTParallelismTolerance;
137 else if (strcmp(aLast, "PERPENDICULARITY_TOLERANCE") == 0) aType = StepDimTol_GTTPerpendicularityTolerance;
138 else if (strcmp(aLast, "POSITION_TOLERANCE") == 0) aType = StepDimTol_GTTPositionTolerance;
139 else if (strcmp(aLast, "ROUNDNESS_TOLERANCE") == 0) aType = StepDimTol_GTTRoundnessTolerance;
140 else if (strcmp(aLast, "STRAIGHTNESS_TOLERANCE") == 0) aType = StepDimTol_GTTStraightnessTolerance;
141 else if (strcmp(aLast, "SURFACE_PROFILE_TOLERANCE") == 0) aType = StepDimTol_GTTSurfaceProfileTolerance;
142 else if (strcmp(aLast, "SYMMETRY_TOLERANCE") == 0) aType = StepDimTol_GTTSymmetryTolerance;
143 else if (strcmp(aLast, "TOTAL_RUNOUT_TOLERANCE") == 0) aType = StepDimTol_GTTTotalRunoutTolerance;
144 else ach->AddFail("The type of geometric tolerance is not supported");
145
146 // Initialize entity
147 ent->Init(aName, aDescription, aMagnitude, aTolerancedShapeAspect, aGTWDR, aGTWM, aMaxTol, aType);
148
149}
150
151
152//=======================================================================
153//function : WriteStep
154//purpose :
155//=======================================================================
156
157void RWStepDimTol_RWGeoTolAndGeoTolWthDatRefAndGeoTolWthMaxTol::WriteStep
158 (StepData_StepWriter& SW,
159 const Handle(StepDimTol_GeoTolAndGeoTolWthDatRefAndGeoTolWthMaxTol)& ent) const
160{
161 StepDimTol_GeometricToleranceType aType = ent->GetToleranceType();
162 if (aType == StepDimTol_GTTAngularityTolerance)
163 SW.StartEntity("ANGULARITY_TOLERANCE");
164 else if (aType == StepDimTol_GTTCircularRunoutTolerance)
165 SW.StartEntity("CIRCULAR_RUNOUT_TOLERANCE");
166 else if (aType == StepDimTol_GTTCoaxialityTolerance)
167 SW.StartEntity("COAXIALITY_TOLERANCE");
168 else if (aType == StepDimTol_GTTConcentricityTolerance)
169 SW.StartEntity("CONCENTRICITY_TOLERANCE");
170 else if (aType == StepDimTol_GTTCylindricityTolerance)
171 SW.StartEntity("CYLINDRICITY_TOLERANCE");
172 else if (aType == StepDimTol_GTTFlatnessTolerance)
173 SW.StartEntity("FLATNESS_TOLERANCE");
174
175 SW.StartEntity("GEOMETRIC_TOLERANCE");
176 SW.Send(ent->Name());
177 SW.Send(ent->Description());
178 SW.Send(ent->Magnitude());
179 SW.Send(ent->TolerancedShapeAspect().Value());
180 SW.StartEntity("GEOMETRIC_TOLERANCE_WITH_MAXIMUM_TOLERANCE");
181 SW.Send(ent->GetMaxTolerance());
182 SW.StartEntity("GEOMETRIC_TOLERANCE_WITH_DATUM_REFERENCE");
183 SW.OpenSub();
184 for(Standard_Integer i4=1; i4<=ent->GetGeometricToleranceWithDatumReference()->DatumSystemAP242()->Length(); i4++) {
185 StepDimTol_DatumSystemOrReference Var0 =
186 ent->GetGeometricToleranceWithDatumReference()->DatumSystemAP242()->Value(i4);
187 SW.Send(Var0.Value());
188 }
189 SW.CloseSub();
190
191 SW.StartEntity("GEOMETRIC_TOLERANCE_WITH_MODIFIERS");
192 SW.OpenSub();
193 Handle(StepDimTol_GeometricToleranceWithModifiers) aGTWM = ent->GetGeometricToleranceWithModifiers();
194 for (Standard_Integer i = 1; i <= aGTWM->NbModifiers(); i++) {
195 switch (aGTWM->ModifierValue(i)) {
196 case StepDimTol_GTMAnyCrossSection: SW.SendEnum (".ANY_CROSS_SECTION."); break;
197 case StepDimTol_GTMCommonZone: SW.SendEnum (".COMMON_ZONE."); break;
198 case StepDimTol_GTMEachRadialElement: SW.SendEnum (".EACH_RADIAL_ELEMENT."); break;
199 case StepDimTol_GTMFreeState: SW.SendEnum (".FREE_STATE."); break;
200 case StepDimTol_GTMLeastMaterialRequirement: SW.SendEnum (".LEAST_MATERIAL_REQUIREMENT."); break;
201 case StepDimTol_GTMLineElement: SW.SendEnum (".LINE_ELEMENT."); break;
202 case StepDimTol_GTMMajorDiameter: SW.SendEnum (".MAJOR_DIAMETER."); break;
203 case StepDimTol_GTMMaximumMaterialRequirement: SW.SendEnum (".MAXIMUM_MATERIAL_REQUIREMENT."); break;
204 case StepDimTol_GTMMinorDiameter: SW.SendEnum (".MINOR_DIAMETER."); break;
205 case StepDimTol_GTMNotConvex: SW.SendEnum (".NOT_CONVEX."); break;
206 case StepDimTol_GTMPitchDiameter: SW.SendEnum (".PITCH_DIAMETER."); break;
207 case StepDimTol_GTMReciprocityRequirement: SW.SendEnum (".RECIPROCITY_REQUIREMENT."); break;
208 case StepDimTol_GTMSeparateRequirement: SW.SendEnum (".SEPARATE_REQUIREMENT."); break;
209 case StepDimTol_GTMStatisticalTolerance: SW.SendEnum (".STATISTICAL_TOLERANCE."); break;
210 case StepDimTol_GTMTangentPlane: SW.SendEnum (".TANGENT_PLANE."); break;
211 }
212 }
213 SW.CloseSub();
214
215 if (aType == StepDimTol_GTTLineProfileTolerance)
216 SW.StartEntity("LINE_PROFILE_TOLERANCE");
217 else if (aType == StepDimTol_GTTParallelismTolerance)
218 SW.StartEntity("PARALLELISM_TOLERANCE");
219 else if (aType == StepDimTol_GTTPerpendicularityTolerance)
220 SW.StartEntity("PERPENDICULARITY_TOLERANCE");
221 else if (aType == StepDimTol_GTTPositionTolerance)
222 SW.StartEntity("POSITION_TOLERANCE");
223 else if (aType == StepDimTol_GTTRoundnessTolerance)
224 SW.StartEntity("ROUNDNESS_TOLERANCE");
225 else if (aType == StepDimTol_GTTStraightnessTolerance)
226 SW.StartEntity("STRAIGHTNESS_TOLERANCE");
227 else if (aType == StepDimTol_GTTSurfaceProfileTolerance)
228 SW.StartEntity("SURFACE_PROFILE_TOLERANCE");
229 else if (aType == StepDimTol_GTTSymmetryTolerance)
230 SW.StartEntity("SYMMETRY_TOLERANCE");
231 else if (aType == StepDimTol_GTTTotalRunoutTolerance)
232 SW.StartEntity("TOTAL_RUNOUT_TOLERANCE");
233}
234
235
236//=======================================================================
237//function : Share
238//purpose :
239//=======================================================================
240
241void RWStepDimTol_RWGeoTolAndGeoTolWthDatRefAndGeoTolWthMaxTol::Share
242 (const Handle(StepDimTol_GeoTolAndGeoTolWthDatRefAndGeoTolWthMaxTol)& ent,
243 Interface_EntityIterator& iter) const
244{
245 // Own fields of GeometricTolerance
246 iter.AddItem (ent->Magnitude());
247 iter.AddItem (ent->TolerancedShapeAspect().Value());
248 // Own fields of GeometricToleranceWithDatumReference
249 for (Standard_Integer i3=1; i3<=ent->GetGeometricToleranceWithDatumReference()->DatumSystemAP242()->Length(); i3++ ) {
250 StepDimTol_DatumSystemOrReference Var0 = ent->GetGeometricToleranceWithDatumReference()->DatumSystemAP242()->Value(i3);
251 iter.AddItem (Var0.Value());
252 }
253}