Commit | Line | Data |
---|---|---|
7fd59977 | 1 | // File: IntTools_FaceFace.cxx |
2 | // Created: Thu Nov 23 14:52:53 2000 | |
3 | // Author: Michael KLOKOV | |
4 | // Copyright: OPEN CASCADE 2000 | |
5 | ||
6 | ||
7 | #include <IntTools_FaceFace.ixx> | |
8 | ||
9 | #include <Precision.hxx> | |
10 | ||
11 | #include <TColStd_HArray1OfReal.hxx> | |
12 | #include <TColStd_Array1OfReal.hxx> | |
13 | #include <TColStd_Array1OfInteger.hxx> | |
14 | #include <TColStd_SequenceOfReal.hxx> | |
15 | #include <TColStd_ListOfInteger.hxx> | |
16 | #include <TColStd_ListIteratorOfListOfInteger.hxx> | |
17 | #include <TColStd_Array1OfListOfInteger.hxx> | |
18 | ||
19 | #include <gp_Lin2d.hxx> | |
20 | #include <gp_Ax22d.hxx> | |
21 | #include <gp_Circ2d.hxx> | |
22 | #include <gp_Torus.hxx> | |
23 | #include <gp_Cylinder.hxx> | |
24 | ||
25 | #include <Bnd_Box.hxx> | |
26 | ||
27 | #include <TColgp_HArray1OfPnt2d.hxx> | |
28 | #include <TColgp_SequenceOfPnt2d.hxx> | |
29 | #include <TColgp_Array1OfPnt.hxx> | |
30 | #include <TColgp_Array1OfPnt2d.hxx> | |
31 | ||
32 | #include <IntAna_QuadQuadGeo.hxx> | |
33 | ||
34 | #include <IntSurf_PntOn2S.hxx> | |
35 | #include <IntSurf_LineOn2S.hxx> | |
36 | #include <IntSurf_PntOn2S.hxx> | |
37 | #include <IntSurf_ListOfPntOn2S.hxx> | |
38 | #include <IntRes2d_Domain.hxx> | |
39 | #include <ProjLib_Plane.hxx> | |
40 | ||
41 | #include <IntPatch_GLine.hxx> | |
42 | #include <IntPatch_RLine.hxx> | |
43 | #include <IntPatch_WLine.hxx> | |
44 | #include <IntPatch_ALine.hxx> | |
45 | #include <IntPatch_ALineToWLine.hxx> | |
46 | ||
47 | #include <ElSLib.hxx> | |
48 | #include <ElCLib.hxx> | |
49 | ||
50 | #include <Extrema_ExtCC.hxx> | |
51 | #include <Extrema_POnCurv.hxx> | |
52 | #include <BndLib_AddSurface.hxx> | |
53 | ||
54 | #include <Adaptor3d_SurfacePtr.hxx> | |
55 | #include <Adaptor2d_HLine2d.hxx> | |
56 | ||
57 | #include <GeomAbs_SurfaceType.hxx> | |
58 | #include <GeomAbs_CurveType.hxx> | |
59 | ||
60 | #include <Geom_Surface.hxx> | |
61 | #include <Geom_Line.hxx> | |
62 | #include <Geom_Circle.hxx> | |
63 | #include <Geom_Ellipse.hxx> | |
64 | #include <Geom_Parabola.hxx> | |
65 | #include <Geom_Hyperbola.hxx> | |
66 | #include <Geom_TrimmedCurve.hxx> | |
67 | #include <Geom_BSplineCurve.hxx> | |
68 | #include <Geom_RectangularTrimmedSurface.hxx> | |
69 | #include <Geom_OffsetSurface.hxx> | |
70 | #include <Geom_Curve.hxx> | |
71 | #include <Geom_Conic.hxx> | |
72 | ||
73 | #include <Geom2d_TrimmedCurve.hxx> | |
74 | #include <Geom2d_BSplineCurve.hxx> | |
75 | #include <Geom2d_Line.hxx> | |
76 | #include <Geom2d_Curve.hxx> | |
77 | #include <Geom2d_Circle.hxx> | |
78 | ||
79 | #include <Geom2dAPI_InterCurveCurve.hxx> | |
80 | #include <Geom2dInt_GInter.hxx> | |
81 | #include <GeomAdaptor_Curve.hxx> | |
82 | #include <GeomAdaptor_HSurface.hxx> | |
83 | #include <GeomAdaptor_Surface.hxx> | |
84 | #include <GeomLib_CheckBSplineCurve.hxx> | |
85 | #include <GeomLib_Check2dBSplineCurve.hxx> | |
86 | ||
87 | #include <GeomInt_WLApprox.hxx> | |
88 | #include <GeomProjLib.hxx> | |
89 | #include <GeomAPI_ProjectPointOnSurf.hxx> | |
90 | #include <Geom2dAdaptor_Curve.hxx> | |
91 | // | |
92 | #include <TopoDS.hxx> | |
93 | #include <TopoDS_Edge.hxx> | |
94 | #include <TopExp_Explorer.hxx> | |
95 | ||
96 | #include <BRep_Tool.hxx> | |
97 | #include <BRepTools.hxx> | |
98 | #include <BRepAdaptor_Surface.hxx> | |
99 | ||
100 | #include <BOPTColStd_Dump.hxx> | |
101 | ||
102 | #include <IntTools_Curve.hxx> | |
103 | #include <IntTools_Tools.hxx> | |
104 | #include <IntTools_Tools.hxx> | |
105 | #include <IntTools_TopolTool.hxx> | |
106 | #include <IntTools_PntOnFace.hxx> | |
107 | #include <IntTools_PntOn2Faces.hxx> | |
108 | #include <IntTools_Context.hxx> | |
0fc4f2e2 P |
109 | #include <IntSurf_ListIteratorOfListOfPntOn2S.hxx> |
110 | ||
7fd59977 | 111 | // |
112 | static | |
113 | void TolR3d(const TopoDS_Face& , | |
114 | const TopoDS_Face& , | |
115 | Standard_Real& ); | |
116 | static | |
117 | Handle(Geom_Curve) MakeBSpline (const Handle(IntPatch_WLine)&, | |
118 | const Standard_Integer, | |
119 | const Standard_Integer); | |
120 | ||
121 | static | |
122 | void Parameters(const Handle(GeomAdaptor_HSurface)&, | |
123 | const Handle(GeomAdaptor_HSurface)&, | |
124 | const gp_Pnt&, | |
125 | Standard_Real&, | |
126 | Standard_Real&, | |
127 | Standard_Real&, | |
128 | Standard_Real&); | |
129 | ||
130 | static | |
131 | void BuildPCurves (Standard_Real f,Standard_Real l,Standard_Real& Tol, | |
132 | const Handle (Geom_Surface)& S, | |
133 | const Handle (Geom_Curve)& C, | |
134 | Handle (Geom2d_Curve)& C2d); | |
135 | ||
136 | static | |
137 | void CorrectSurfaceBoundaries(const TopoDS_Face& theFace, | |
138 | const Standard_Real theTolerance, | |
139 | Standard_Real& theumin, | |
140 | Standard_Real& theumax, | |
141 | Standard_Real& thevmin, | |
142 | Standard_Real& thevmax); | |
143 | static | |
144 | Standard_Boolean NotUseSurfacesForApprox | |
145 | (const TopoDS_Face& aF1, | |
146 | const TopoDS_Face& aF2, | |
147 | const Handle(IntPatch_WLine)& WL, | |
148 | const Standard_Integer ifprm, | |
149 | const Standard_Integer ilprm); | |
150 | ||
151 | static | |
152 | Handle(IntPatch_WLine) ComputePurgedWLine(const Handle(IntPatch_WLine)& theWLine); | |
153 | ||
154 | static | |
155 | Standard_Real AdjustPeriodic(const Standard_Real theParameter, | |
156 | const Standard_Real parmin, | |
157 | const Standard_Real parmax, | |
158 | const Standard_Real thePeriod, | |
159 | Standard_Real& theOffset); | |
160 | ||
161 | static | |
162 | Handle(Geom2d_BSplineCurve) MakeBSpline2d(const Handle(IntPatch_WLine)& theWLine, | |
163 | const Standard_Integer ideb, | |
164 | const Standard_Integer ifin, | |
165 | const Standard_Boolean onFirst); | |
166 | ||
167 | static | |
168 | Standard_Boolean DecompositionOfWLine(const Handle(IntPatch_WLine)& theWLine, | |
169 | const Handle(GeomAdaptor_HSurface)& theSurface1, | |
170 | const Handle(GeomAdaptor_HSurface)& theSurface2, | |
171 | const TopoDS_Face& theFace1, | |
172 | const TopoDS_Face& theFace2, | |
173 | const IntTools_LineConstructor& theLConstructor, | |
174 | const Standard_Boolean theAvoidLConstructor, | |
175 | IntPatch_SequenceOfLine& theNewLines, | |
176 | Standard_Real& theReachedTol3d); | |
177 | ||
178 | static | |
179 | Standard_Boolean ParameterOutOfBoundary(const Standard_Real theParameter, | |
180 | const Handle(Geom_Curve)& theCurve, | |
181 | const TopoDS_Face& theFace1, | |
182 | const TopoDS_Face& theFace2, | |
183 | const Standard_Real theOtherParameter, | |
184 | const Standard_Boolean bIncreasePar, | |
185 | Standard_Real& theNewParameter); | |
186 | ||
187 | static | |
188 | Standard_Boolean IsCurveValid(Handle(Geom2d_Curve)& thePCurve); | |
189 | ||
190 | static | |
191 | Standard_Boolean IsPointOnBoundary(const Standard_Real theParameter, | |
192 | const Standard_Real theFirstBoundary, | |
193 | const Standard_Real theSecondBoundary, | |
194 | const Standard_Real theResolution, | |
195 | Standard_Boolean& IsOnFirstBoundary); | |
196 | static | |
197 | Standard_Boolean FindPoint(const gp_Pnt2d& theFirstPoint, | |
198 | const gp_Pnt2d& theLastPoint, | |
199 | const Standard_Real theUmin, | |
200 | const Standard_Real theUmax, | |
201 | const Standard_Real theVmin, | |
202 | const Standard_Real theVmax, | |
203 | gp_Pnt2d& theNewPoint); | |
204 | ||
205 | ||
206 | static | |
207 | Standard_Integer ComputeTangentZones( const Handle(GeomAdaptor_HSurface)& theSurface1, | |
208 | const Handle(GeomAdaptor_HSurface)& theSurface2, | |
209 | const TopoDS_Face& theFace1, | |
210 | const TopoDS_Face& theFace2, | |
211 | Handle(TColgp_HArray1OfPnt2d)& theResultOnS1, | |
212 | Handle(TColgp_HArray1OfPnt2d)& theResultOnS2, | |
213 | Handle(TColStd_HArray1OfReal)& theResultRadius); | |
214 | ||
215 | static | |
216 | Standard_Boolean FindPoint(const gp_Pnt2d& theFirstPoint, | |
217 | const gp_Pnt2d& theLastPoint, | |
218 | const Standard_Real theUmin, | |
219 | const Standard_Real theUmax, | |
220 | const Standard_Real theVmin, | |
221 | const Standard_Real theVmax, | |
222 | const gp_Pnt2d& theTanZoneCenter, | |
223 | const Standard_Real theZoneRadius, | |
224 | Handle(GeomAdaptor_HSurface) theGASurface, | |
225 | gp_Pnt2d& theNewPoint); | |
226 | ||
227 | static | |
228 | Standard_Boolean IsInsideTanZone(const gp_Pnt2d& thePoint, | |
229 | const gp_Pnt2d& theTanZoneCenter, | |
230 | const Standard_Real theZoneRadius, | |
231 | Handle(GeomAdaptor_HSurface) theGASurface); | |
232 | ||
233 | static | |
234 | gp_Pnt2d AdjustByNeighbour(const gp_Pnt2d& theaNeighbourPoint, | |
235 | const gp_Pnt2d& theOriginalPoint, | |
236 | Handle(GeomAdaptor_HSurface) theGASurface); | |
237 | static | |
238 | Standard_Boolean ApproxWithPCurves(const gp_Cylinder& theCyl, | |
239 | const gp_Sphere& theSph); | |
240 | ||
241 | static void PerformPlanes(const Handle(GeomAdaptor_HSurface)& theS1, | |
242 | const Handle(GeomAdaptor_HSurface)& theS2, | |
243 | const Standard_Real TolAng, | |
244 | const Standard_Real TolTang, | |
245 | const Standard_Boolean theApprox1, | |
246 | const Standard_Boolean theApprox2, | |
247 | IntTools_SequenceOfCurves& theSeqOfCurve, | |
248 | Standard_Boolean& theTangentFaces); | |
249 | ||
250 | static Standard_Boolean ClassifyLin2d(const Handle(GeomAdaptor_HSurface)& theS, | |
251 | const gp_Lin2d& theLin2d, | |
252 | const Standard_Real theTol, | |
253 | Standard_Real& theP1, | |
254 | Standard_Real& theP2); | |
0fc4f2e2 | 255 | // |
7fd59977 | 256 | static |
257 | void ApproxParameters(const Handle(GeomAdaptor_HSurface)& aHS1, | |
258 | const Handle(GeomAdaptor_HSurface)& aHS2, | |
259 | Standard_Integer& iDegMin, | |
0fc4f2e2 | 260 | Standard_Integer& iDegMax); |
7fd59977 | 261 | |
0fc4f2e2 P |
262 | static |
263 | void Tolerances(const Handle(GeomAdaptor_HSurface)& aHS1, | |
264 | const Handle(GeomAdaptor_HSurface)& aHS2, | |
265 | Standard_Real& aTolArc, | |
266 | Standard_Real& aTolTang, | |
267 | Standard_Real& aUVMaxStep, | |
268 | Standard_Real& aDeflection); | |
269 | ||
270 | //modified by NIZNHY-PKV Tue Feb 15 10:16:05 2011f | |
271 | static | |
272 | Standard_Boolean SortTypes(const GeomAbs_SurfaceType aType1, | |
273 | const GeomAbs_SurfaceType aType2); | |
274 | static | |
275 | Standard_Integer IndexType(const GeomAbs_SurfaceType aType); | |
276 | //modified by NIZNHY-PKV Tue Feb 15 10:16:09 2011t | |
7fd59977 | 277 | // |
278 | //======================================================================= | |
279 | //function : | |
280 | //purpose : | |
281 | //======================================================================= | |
282 | IntTools_FaceFace::IntTools_FaceFace() | |
283 | { | |
284 | myTangentFaces=Standard_False; | |
285 | // | |
286 | myHS1 = new GeomAdaptor_HSurface (); | |
287 | myHS2 = new GeomAdaptor_HSurface (); | |
288 | myTolReached2d=0.; | |
289 | myTolReached3d=0.; | |
290 | SetParameters(Standard_True, Standard_True, Standard_True, 1.e-07); | |
291 | } | |
292 | //======================================================================= | |
293 | //function : Face1 | |
294 | //purpose : | |
295 | //======================================================================= | |
296 | const TopoDS_Face& IntTools_FaceFace::Face1() const | |
297 | { | |
298 | return myFace1; | |
299 | } | |
300 | ||
301 | //======================================================================= | |
302 | //function : Face2 | |
303 | //purpose : | |
304 | //======================================================================= | |
305 | const TopoDS_Face& IntTools_FaceFace::Face2() const | |
306 | { | |
307 | return myFace2; | |
308 | } | |
309 | ||
310 | //======================================================================= | |
311 | //function : TangentFaces | |
312 | //purpose : | |
313 | //======================================================================= | |
314 | Standard_Boolean IntTools_FaceFace::TangentFaces() const | |
315 | { | |
316 | return myTangentFaces; | |
317 | } | |
318 | //======================================================================= | |
319 | //function : Points | |
320 | //purpose : | |
321 | //======================================================================= | |
322 | const IntTools_SequenceOfPntOn2Faces& IntTools_FaceFace::Points() const | |
323 | { | |
324 | return myPnts; | |
325 | } | |
326 | //======================================================================= | |
327 | //function : IsDone | |
328 | //purpose : | |
329 | //======================================================================= | |
330 | Standard_Boolean IntTools_FaceFace::IsDone() const | |
331 | { | |
332 | return myIsDone; | |
333 | } | |
334 | //======================================================================= | |
335 | //function : TolReached3d | |
336 | //purpose : | |
337 | //======================================================================= | |
338 | Standard_Real IntTools_FaceFace::TolReached3d() const | |
339 | { | |
340 | return myTolReached3d; | |
341 | } | |
342 | //======================================================================= | |
343 | //function : Lines | |
344 | //purpose : return lines of intersection | |
345 | //======================================================================= | |
346 | const IntTools_SequenceOfCurves& IntTools_FaceFace::Lines() const | |
347 | { | |
348 | StdFail_NotDone_Raise_if(!myIsDone, | |
349 | "IntTools_FaceFace::Lines() => !myIntersector.IsDone()"); | |
350 | return mySeqOfCurve; | |
351 | } | |
352 | ||
353 | //======================================================================= | |
354 | //function : TolReached2d | |
355 | //purpose : | |
356 | //======================================================================= | |
357 | Standard_Real IntTools_FaceFace::TolReached2d() const | |
358 | { | |
359 | return myTolReached2d; | |
360 | } | |
361 | // ======================================================================= | |
362 | // function: SetParameters | |
363 | // | |
364 | // ======================================================================= | |
365 | void IntTools_FaceFace::SetParameters(const Standard_Boolean ToApproxC3d, | |
366 | const Standard_Boolean ToApproxC2dOnS1, | |
367 | const Standard_Boolean ToApproxC2dOnS2, | |
368 | const Standard_Real ApproximationTolerance) | |
369 | { | |
370 | myApprox = ToApproxC3d; | |
371 | myApprox1 = ToApproxC2dOnS1; | |
372 | myApprox2 = ToApproxC2dOnS2; | |
373 | myTolApprox = ApproximationTolerance; | |
374 | } | |
375 | //======================================================================= | |
376 | //function : SetList | |
377 | //purpose : | |
378 | //======================================================================= | |
379 | ||
380 | void IntTools_FaceFace::SetList(IntSurf_ListOfPntOn2S& aListOfPnts) | |
381 | { | |
382 | myListOfPnts = aListOfPnts; | |
383 | } | |
0fc4f2e2 | 384 | |
7fd59977 | 385 | //======================================================================= |
386 | //function : Perform | |
387 | //purpose : intersect surfaces of the faces | |
388 | //======================================================================= | |
0fc4f2e2 P |
389 | void IntTools_FaceFace::Perform(const TopoDS_Face& aF1, |
390 | const TopoDS_Face& aF2) | |
7fd59977 | 391 | { |
0fc4f2e2 P |
392 | Standard_Boolean hasCone, RestrictLine, bTwoPlanes, bReverse; |
393 | Standard_Integer aNbLin, aNbPnts, i, NbLinPP; | |
7fd59977 | 394 | Standard_Real TolArc, TolTang, Deflection, UVMaxStep; |
395 | Standard_Real umin, umax, vmin, vmax; | |
396 | Standard_Real aTolF1, aTolF2; | |
397 | GeomAbs_SurfaceType aType1, aType2; | |
398 | Handle(Geom_Surface) S1, S2; | |
399 | Handle(IntTools_TopolTool) dom1, dom2; | |
0fc4f2e2 | 400 | BRepAdaptor_Surface aBAS1, aBAS2; |
7fd59977 | 401 | // |
7fd59977 | 402 | mySeqOfCurve.Clear(); |
7fd59977 | 403 | myTolReached2d=0.; |
404 | myTolReached3d=0.; | |
7fd59977 | 405 | myIsDone = Standard_False; |
0fc4f2e2 P |
406 | myNbrestr=0;//? |
407 | hasCone = Standard_False; | |
408 | bTwoPlanes = Standard_False; | |
409 | // | |
410 | myFace1=aF1; | |
411 | myFace2=aF2; | |
412 | // | |
413 | aBAS1.Initialize(myFace1, Standard_False); | |
414 | aBAS2.Initialize(myFace2, Standard_False); | |
415 | aType1=aBAS1.GetType(); | |
416 | aType2=aBAS2.GetType(); | |
417 | // | |
418 | //modified by NIZNHY-PKV Tue Feb 15 10:34:39 2011f | |
419 | bReverse=SortTypes(aType1, aType2); | |
420 | if (bReverse) { | |
421 | myFace1=aF2; | |
422 | myFace2=aF1; | |
423 | aType1=aBAS2.GetType(); | |
424 | aType2=aBAS1.GetType(); | |
425 | // | |
426 | if (myListOfPnts.Extent()) { | |
427 | Standard_Real aU1,aV1,aU2,aV2; | |
428 | IntSurf_ListIteratorOfListOfPntOn2S aItP2S; | |
429 | // | |
430 | aItP2S.Initialize(myListOfPnts); | |
431 | for (; aItP2S.More(); aItP2S.Next()){ | |
432 | IntSurf_PntOn2S& aP2S=aItP2S.Value(); | |
433 | aP2S.Parameters(aU1,aV1,aU2,aV2); | |
434 | aP2S.SetValue(aU2,aV2,aU1,aV1); | |
435 | } | |
436 | } | |
437 | } | |
438 | //modified by NIZNHY-PKV Tue Feb 15 10:34:45 2011t | |
439 | // | |
440 | S1=BRep_Tool::Surface(myFace1); | |
441 | S2=BRep_Tool::Surface(myFace2); | |
7fd59977 | 442 | // |
0fc4f2e2 P |
443 | aTolF1=BRep_Tool::Tolerance(myFace1); |
444 | aTolF2=BRep_Tool::Tolerance(myFace2); | |
7fd59977 | 445 | // |
446 | TolArc= aTolF1 + aTolF2; | |
447 | TolTang = TolArc; | |
448 | // | |
0fc4f2e2 | 449 | NbLinPP = 0; |
7fd59977 | 450 | if(aType1==GeomAbs_Plane && aType2==GeomAbs_Plane){ |
451 | bTwoPlanes = Standard_True; | |
452 | ||
0fc4f2e2 | 453 | BRepTools::UVBounds(myFace1, umin, umax, vmin, vmax); |
7fd59977 | 454 | myHS1->ChangeSurface().Load(S1, umin, umax, vmin, vmax); |
455 | // | |
0fc4f2e2 | 456 | BRepTools::UVBounds(myFace2, umin, umax, vmin, vmax); |
7fd59977 | 457 | myHS2->ChangeSurface().Load(S2, umin, umax, vmin, vmax); |
458 | Standard_Real TolAng = 1.e-8; | |
0fc4f2e2 | 459 | PerformPlanes(myHS1, myHS2, TolAng, TolTang, myApprox1, myApprox2, |
7fd59977 | 460 | mySeqOfCurve, myTangentFaces); |
461 | ||
462 | myIsDone = Standard_True; | |
463 | ||
0fc4f2e2 P |
464 | if(myTangentFaces) { |
465 | return; | |
466 | } | |
467 | // | |
7fd59977 | 468 | NbLinPP = mySeqOfCurve.Length(); |
0fc4f2e2 P |
469 | if(NbLinPP == 0) { |
470 | return; | |
471 | } | |
7fd59977 | 472 | |
473 | Standard_Real aTolFMax; | |
474 | // | |
475 | myTolReached3d = 1.e-7; | |
476 | // | |
477 | aTolFMax=Max(aTolF1, aTolF2); | |
478 | // | |
479 | if (aTolFMax>myTolReached3d) { | |
480 | myTolReached3d=aTolFMax; | |
481 | } | |
482 | myTolReached2d = myTolReached3d; | |
0fc4f2e2 P |
483 | //modified by NIZNHY-PKV Tue Feb 15 10:33:42 2011f |
484 | if (bReverse) { | |
485 | Handle(Geom2d_Curve) aC2D1, aC2D2; | |
486 | // | |
487 | aNbLin=mySeqOfCurve.Length(); | |
488 | for (i=1; i<=aNbLin; ++i) { | |
489 | IntTools_Curve& aIC=mySeqOfCurve(i); | |
490 | aC2D1=aIC.FirstCurve2d(); | |
491 | aC2D2=aIC.SecondCurve2d(); | |
492 | // | |
493 | aIC.SetFirstCurve2d(aC2D2); | |
494 | aIC.SetSecondCurve2d(aC2D1); | |
495 | } | |
496 | } | |
497 | //modified by NIZNHY-PKV Tue Feb 15 10:33:46 2011t | |
7fd59977 | 498 | return; |
0fc4f2e2 | 499 | }//if(aType1==GeomAbs_Plane && aType2==GeomAbs_Plane){ |
7fd59977 | 500 | // |
501 | if (aType1==GeomAbs_Plane && | |
502 | (aType2==GeomAbs_Cylinder || | |
503 | aType2==GeomAbs_Cone || | |
504 | aType2==GeomAbs_Torus)) { | |
505 | Standard_Real dU, dV; | |
506 | // F1 | |
0fc4f2e2 | 507 | BRepTools::UVBounds(myFace1, umin, umax, vmin, vmax); |
7fd59977 | 508 | dU=0.1*(umax-umin); |
509 | dV=0.1*(vmax-vmin); | |
510 | umin=umin-dU; | |
511 | umax=umax+dU; | |
512 | vmin=vmin-dV; | |
513 | vmax=vmax+dV; | |
514 | myHS1->ChangeSurface().Load(S1, umin, umax, vmin, vmax); | |
515 | // F2 | |
0fc4f2e2 P |
516 | BRepTools::UVBounds(myFace2, umin, umax, vmin, vmax); |
517 | CorrectSurfaceBoundaries(myFace2, (aTolF1 + aTolF2) * 2., umin, umax, vmin, vmax); | |
7fd59977 | 518 | myHS2->ChangeSurface().Load(S2, umin, umax, vmin, vmax); |
519 | // | |
520 | if( aType2==GeomAbs_Cone ) { | |
521 | TolArc = 0.0001; | |
7fd59977 | 522 | hasCone = Standard_True; |
523 | } | |
524 | } | |
525 | // | |
526 | else if ((aType1==GeomAbs_Cylinder|| | |
527 | aType1==GeomAbs_Cone || | |
528 | aType1==GeomAbs_Torus) && | |
529 | aType2==GeomAbs_Plane) { | |
530 | Standard_Real dU, dV; | |
531 | //F1 | |
0fc4f2e2 P |
532 | BRepTools::UVBounds(myFace1, umin, umax, vmin, vmax); |
533 | CorrectSurfaceBoundaries(myFace1, (aTolF1 + aTolF2) * 2., umin, umax, vmin, vmax); | |
7fd59977 | 534 | myHS1->ChangeSurface().Load(S1, umin, umax, vmin, vmax); |
535 | // F2 | |
0fc4f2e2 | 536 | BRepTools::UVBounds(myFace2, umin, umax, vmin, vmax); |
7fd59977 | 537 | dU=0.1*(umax-umin); |
538 | dV=0.1*(vmax-vmin); | |
539 | umin=umin-dU; | |
540 | umax=umax+dU; | |
541 | vmin=vmin-dV; | |
542 | vmax=vmax+dV; | |
543 | myHS2->ChangeSurface().Load(S2, umin, umax, vmin, vmax); | |
544 | // | |
545 | if( aType1==GeomAbs_Cone ) { | |
546 | TolArc = 0.0001; | |
7fd59977 | 547 | hasCone = Standard_True; |
548 | } | |
549 | } | |
550 | ||
551 | // | |
552 | else { | |
0fc4f2e2 | 553 | BRepTools::UVBounds(myFace1, umin, umax, vmin, vmax); |
7fd59977 | 554 | // |
0fc4f2e2 | 555 | CorrectSurfaceBoundaries(myFace1, (aTolF1 + aTolF2) * 2., umin, umax, vmin, vmax); |
7fd59977 | 556 | // |
557 | myHS1->ChangeSurface().Load(S1, umin, umax, vmin, vmax); | |
558 | // | |
0fc4f2e2 | 559 | BRepTools::UVBounds(myFace2, umin, umax, vmin, vmax); |
7fd59977 | 560 | // |
0fc4f2e2 | 561 | CorrectSurfaceBoundaries(myFace2, (aTolF1 + aTolF2) * 2., umin, umax, vmin, vmax); |
7fd59977 | 562 | // |
563 | myHS2->ChangeSurface().Load(S2, umin, umax, vmin, vmax); | |
564 | } | |
565 | // | |
566 | dom1 = new IntTools_TopolTool(myHS1); | |
567 | dom2 = new IntTools_TopolTool(myHS2); | |
568 | // | |
569 | myLConstruct.Load(dom1, dom2, myHS1, myHS2); | |
570 | // | |
571 | Deflection = (hasCone) ? 0.085 : 0.1; | |
572 | UVMaxStep = 0.001; | |
573 | // | |
0fc4f2e2 P |
574 | Tolerances(myHS1, myHS2, TolArc, TolTang, UVMaxStep, Deflection); |
575 | // | |
576 | myIntersector.SetTolerances(TolArc, TolTang, UVMaxStep, Deflection); | |
7fd59977 | 577 | // |
578 | RestrictLine = Standard_False; | |
579 | // | |
580 | if((myHS1->IsUClosed() && !myHS1->IsUPeriodic()) || | |
581 | (myHS1->IsVClosed() && !myHS1->IsVPeriodic()) || | |
582 | (myHS2->IsUClosed() && !myHS2->IsUPeriodic()) || | |
583 | (myHS2->IsVClosed() && !myHS2->IsVPeriodic())) { | |
584 | RestrictLine = Standard_True; | |
585 | } | |
586 | // | |
587 | if(((aType1 != GeomAbs_BSplineSurface) && | |
588 | (aType1 != GeomAbs_BezierSurface) && | |
589 | (aType1 != GeomAbs_OtherSurface)) && | |
590 | ((aType2 != GeomAbs_BSplineSurface) && | |
591 | (aType2 != GeomAbs_BezierSurface) && | |
592 | (aType2 != GeomAbs_OtherSurface))) { | |
593 | RestrictLine = Standard_True; | |
594 | // | |
595 | if ((aType1 == GeomAbs_Torus) || | |
596 | (aType2 == GeomAbs_Torus) ) { | |
597 | myListOfPnts.Clear(); | |
598 | } | |
599 | } | |
600 | // | |
601 | if(!RestrictLine) { | |
602 | TopExp_Explorer aExp; | |
603 | // | |
604 | for(i = 0; (!RestrictLine) && (i < 2); i++) { | |
605 | const TopoDS_Face& aF=(!i) ? myFace1 : myFace2; | |
606 | aExp.Init(aF, TopAbs_EDGE); | |
607 | for(; aExp.More(); aExp.Next()) { | |
608 | const TopoDS_Edge& aE=TopoDS::Edge(aExp.Current()); | |
609 | // | |
610 | if(BRep_Tool::Degenerated(aE)) { | |
611 | RestrictLine = Standard_True; | |
612 | break; | |
613 | } | |
614 | } | |
615 | } | |
616 | } | |
617 | // | |
618 | myIntersector.Perform(myHS1, dom1, myHS2, dom2, | |
619 | TolArc, TolTang, | |
620 | myListOfPnts, RestrictLine); | |
621 | // | |
622 | myIsDone = myIntersector.IsDone(); | |
623 | if (myIsDone) { | |
624 | myTangentFaces=myIntersector.TangentFaces(); | |
625 | if (myTangentFaces) { | |
626 | return; | |
627 | } | |
628 | // | |
629 | if(RestrictLine) { | |
630 | myListOfPnts.Clear(); // to use LineConstructor | |
631 | } | |
632 | // | |
633 | aNbLin = myIntersector.NbLines(); | |
634 | for (i=1; i<=aNbLin; ++i) { | |
635 | MakeCurve(i, dom1, dom2); | |
636 | } | |
637 | // | |
638 | ComputeTolReached3d(); | |
639 | // | |
0fc4f2e2 P |
640 | //modified by NIZNHY-PKV Tue Feb 15 14:13:25 2011f |
641 | if (bReverse) { | |
642 | Handle(Geom2d_Curve) aC2D1, aC2D2; | |
643 | // | |
644 | aNbLin=mySeqOfCurve.Length(); | |
645 | for (i=1; i<=aNbLin; ++i) { | |
646 | IntTools_Curve& aIC=mySeqOfCurve(i); | |
647 | aC2D1=aIC.FirstCurve2d(); | |
648 | aC2D2=aIC.SecondCurve2d(); | |
649 | // | |
650 | aIC.SetFirstCurve2d(aC2D2); | |
651 | aIC.SetSecondCurve2d(aC2D1); | |
652 | } | |
653 | } | |
654 | //modified by NIZNHY-PKV Tue Feb 15 14:13:29 2011t | |
655 | // | |
656 | // Points | |
7fd59977 | 657 | Standard_Real U1,V1,U2,V2; |
658 | IntTools_PntOnFace aPntOnF1, aPntOnF2; | |
0fc4f2e2 | 659 | IntTools_PntOn2Faces aPntOn2Faces; |
7fd59977 | 660 | // |
661 | aNbPnts=myIntersector.NbPnts(); | |
662 | for (i=1; i<=aNbPnts; ++i) { | |
663 | const IntSurf_PntOn2S& aISPnt=myIntersector.Point(i).PntOn2S(); | |
664 | const gp_Pnt& aPnt=aISPnt.Value(); | |
665 | aISPnt.Parameters(U1,V1,U2,V2); | |
0fc4f2e2 P |
666 | aPntOnF1.Init(myFace1, aPnt, U1, V1); |
667 | aPntOnF2.Init(myFace2, aPnt, U2, V2); | |
668 | //modified by NIZNHY-PKV Tue Feb 15 10:34:10 2011f | |
669 | if (!bReverse) { | |
670 | aPntOn2Faces.SetP1(aPntOnF1); | |
671 | aPntOn2Faces.SetP2(aPntOnF2); | |
672 | } | |
673 | else { | |
674 | aPntOn2Faces.SetP2(aPntOnF1); | |
675 | aPntOn2Faces.SetP1(aPntOnF2); | |
676 | } | |
677 | //aPntOn2Faces.SetP1(aPntOnF1); | |
678 | //aPntOn2Faces.SetP2(aPntOnF2); | |
679 | //modified by NIZNHY-PKV Tue Feb 15 10:34:14 2011t | |
7fd59977 | 680 | myPnts.Append(aPntOn2Faces); |
681 | } | |
682 | // | |
683 | } | |
684 | } | |
685 | //======================================================================= | |
686 | //function :ComputeTolReached3d | |
687 | //purpose : | |
688 | //======================================================================= | |
689 | void IntTools_FaceFace::ComputeTolReached3d() | |
690 | { | |
691 | Standard_Integer aNbLin; | |
692 | GeomAbs_SurfaceType aType1, aType2; | |
693 | // | |
694 | aNbLin=myIntersector.NbLines(); | |
695 | // | |
696 | aType1=myHS1->Surface().GetType(); | |
697 | aType2=myHS2->Surface().GetType(); | |
698 | // | |
699 | if (aNbLin==2 && | |
700 | aType1==GeomAbs_Cylinder && | |
701 | aType2==GeomAbs_Cylinder) { | |
702 | Handle(IntPatch_Line) aIL1, aIL2; | |
703 | IntPatch_IType aTL1, aTL2; | |
704 | // | |
705 | aIL1=myIntersector.Line(1); | |
706 | aIL2=myIntersector.Line(2); | |
707 | aTL1=aIL1->ArcType(); | |
708 | aTL2=aIL2->ArcType(); | |
709 | if (aTL1==IntPatch_Lin && aTL2==IntPatch_Lin) { | |
710 | Standard_Real aD, aDTresh, dTol; | |
711 | gp_Lin aL1, aL2; | |
712 | // | |
713 | dTol=1.e-8; | |
714 | aDTresh=1.5e-6; | |
715 | // | |
716 | aL1=Handle(IntPatch_GLine)::DownCast(aIL1)->Line(); | |
717 | aL2=Handle(IntPatch_GLine)::DownCast(aIL2)->Line(); | |
718 | aD=aL1.Distance(aL2); | |
719 | aD=0.5*aD; | |
720 | if (aD<aDTresh) { | |
721 | myTolReached3d=aD+dTol; | |
722 | } | |
723 | } | |
724 | } | |
0fc4f2e2 | 725 | //904/G3 f |
7fd59977 | 726 | if (aType1==GeomAbs_Plane && |
727 | aType2==GeomAbs_Plane) { | |
728 | Standard_Real aTolF1, aTolF2, aTolFMax, aTolTresh; | |
729 | // | |
730 | aTolTresh=1.e-7; | |
731 | // | |
732 | aTolF1 = BRep_Tool::Tolerance(myFace1); | |
733 | aTolF2 = BRep_Tool::Tolerance(myFace2); | |
734 | aTolFMax=Max(aTolF1, aTolF2); | |
735 | // | |
736 | if (aTolFMax>aTolTresh) { | |
737 | myTolReached3d=aTolFMax; | |
738 | } | |
739 | } | |
0fc4f2e2 | 740 | //t |
7fd59977 | 741 | |
742 | //IFV Bug OCC20297 | |
743 | if((aType1 == GeomAbs_Cylinder && aType2 == GeomAbs_Plane) || | |
744 | (aType2 == GeomAbs_Cylinder && aType1 == GeomAbs_Plane)) { | |
745 | if(aNbLin == 1) { | |
746 | const Handle(IntPatch_Line)& aIL1 = myIntersector.Line(1); | |
747 | if(aIL1->ArcType() == IntPatch_Circle) { | |
748 | gp_Circ aCir = Handle(IntPatch_GLine)::DownCast(aIL1)->Circle(); | |
749 | gp_XYZ aCirDir = aCir.Axis().Direction().XYZ(); | |
750 | gp_XYZ aPlDir; | |
751 | gp_Pln aPln; | |
752 | if(aType1 == GeomAbs_Plane) { | |
753 | aPln = myHS1->Surface().Plane(); | |
754 | } | |
755 | else { | |
756 | aPln = myHS2->Surface().Plane(); | |
757 | } | |
758 | aPlDir = aPln.Axis().Direction().XYZ(); | |
759 | Standard_Real cs = aCirDir*aPlDir; | |
760 | if(cs < 0.) aPlDir.Reverse(); | |
761 | Standard_Real eps = 1.e-14; | |
762 | if(!aPlDir.IsEqual(aCirDir, eps)) { | |
763 | Standard_Integer aNbP = 11; | |
764 | Standard_Real dt = 2.*PI / (aNbP - 1), t; | |
765 | for(t = 0.; t < 2.*PI; t += dt) { | |
766 | Standard_Real d = aPln.Distance(ElCLib::Value(t, aCir)); | |
767 | if(myTolReached3d < d) myTolReached3d = d; | |
768 | } | |
769 | myTolReached3d *= 1.1; | |
770 | } | |
771 | } //aIL1->ArcType() == IntPatch_Circle | |
772 | } //aNbLin == 1 | |
773 | } // aType1 == GeomAbs_Cylinder && aType2 == GeomAbs_Plane) ... | |
774 | //End IFV Bug OCC20297 | |
0fc4f2e2 P |
775 | // |
776 | //modified by NIZNHY-PKV Mon Feb 14 12:02:46 2011f | |
777 | if ((aType1==GeomAbs_Plane && aType2==GeomAbs_Torus) || | |
778 | (aType2==GeomAbs_Plane && aType1==GeomAbs_Torus)) { | |
779 | aNbLin=mySeqOfCurve.Length(); | |
780 | if (aNbLin!=1) { | |
781 | return; | |
782 | } | |
783 | // | |
784 | Standard_Integer i, aNbP; | |
785 | Standard_Real aT, aT1, aT2, dT, aUT, aVT, aUP, aVP; | |
786 | Standard_Real aDP, aDT, aDmax; | |
787 | gp_Pln aPln; | |
788 | gp_Torus aTorus; | |
789 | gp_Pnt aP, aPP, aPT; | |
790 | // | |
791 | const IntTools_Curve& aIC=mySeqOfCurve(1); | |
792 | const Handle(Geom_Curve)& aC3D=aIC.Curve(); | |
793 | const Handle(Geom_BSplineCurve)& aBS=Handle(Geom_BSplineCurve)::DownCast(aC3D); | |
794 | if (aBS.IsNull()) { | |
795 | return; | |
796 | } | |
797 | // | |
798 | aT1=aBS->FirstParameter(); | |
799 | aT2=aBS->LastParameter(); | |
800 | // | |
801 | aPln =(aType1==GeomAbs_Plane) ? myHS1->Plane() : myHS2->Plane(); | |
802 | aTorus=(aType1==GeomAbs_Plane) ? myHS2->Torus() : myHS1->Torus(); | |
803 | // | |
804 | aDmax=-1.; | |
805 | aNbP=11; | |
806 | dT=(aT2-aT1)/(aNbP-1); | |
807 | for (i=0; i<aNbP; ++i) { | |
808 | aT=aT1+i*dT; | |
809 | if (i==aNbP-1) { | |
810 | aT=aT2; | |
811 | } | |
812 | // | |
813 | aC3D->D0(aT, aP); | |
814 | // | |
815 | ElSLib::Parameters(aPln, aP, aUP, aVP); | |
816 | aPP=ElSLib::Value(aUP, aVP, aPln); | |
817 | aDP=aP.SquareDistance(aPP); | |
818 | if (aDP>aDmax) { | |
819 | aDmax=aDP; | |
820 | } | |
821 | // | |
822 | ElSLib::Parameters(aTorus, aP, aUT, aVT); | |
823 | aPT=ElSLib::Value(aUT, aVT, aTorus); | |
824 | aDT=aP.SquareDistance(aPT); | |
825 | if (aDT>aDmax) { | |
826 | aDmax=aDT; | |
827 | } | |
828 | } | |
829 | // | |
830 | if (aDmax > myTolReached3d*myTolReached3d) { | |
831 | myTolReached3d=sqrt(aDmax); | |
832 | myTolReached3d=1.1*myTolReached3d; | |
833 | } | |
834 | }// if ((aType1==GeomAbs_Plane && aType2==GeomAbs_Torus) || | |
835 | //modified by NIZNHY-PKV Mon Feb 14 12:02:49 2011t | |
7fd59977 | 836 | } |
837 | //======================================================================= | |
838 | //function : MakeCurve | |
839 | //purpose : | |
840 | //======================================================================= | |
841 | void IntTools_FaceFace::MakeCurve(const Standard_Integer Index, | |
842 | const Handle(Adaptor3d_TopolTool)& dom1, | |
843 | const Handle(Adaptor3d_TopolTool)& dom2) | |
844 | { | |
845 | Standard_Boolean bDone, rejectSurface, reApprox, bAvoidLineConstructor; | |
846 | Standard_Boolean ok; | |
847 | Standard_Integer i, j, aNbParts; | |
848 | Standard_Real fprm, lprm; | |
849 | Standard_Real Tolpc; | |
850 | Handle(IntPatch_Line) L; | |
851 | IntPatch_IType typl; | |
852 | Handle(Geom_Curve) newc; | |
853 | // | |
854 | const Standard_Real TOLCHECK =0.0000001; | |
855 | const Standard_Real TOLANGCHECK=0.1; | |
856 | // | |
857 | rejectSurface = Standard_False; | |
858 | reApprox = Standard_False; | |
859 | ||
860 | reapprox:; | |
861 | ||
862 | Tolpc = myTolApprox; | |
863 | bAvoidLineConstructor = Standard_False; | |
864 | L = myIntersector.Line(Index); | |
865 | typl = L->ArcType(); | |
866 | // | |
867 | if(typl==IntPatch_Walking) { | |
868 | Handle(IntPatch_Line) anewL; | |
869 | // | |
870 | const Handle(IntPatch_WLine)& aWLine= | |
871 | Handle(IntPatch_WLine)::DownCast(L); | |
872 | // | |
873 | anewL = ComputePurgedWLine(aWLine); | |
874 | if(anewL.IsNull()) { | |
875 | return; | |
876 | } | |
877 | L = anewL; | |
878 | // | |
879 | if(!myListOfPnts.IsEmpty()) { | |
880 | bAvoidLineConstructor = Standard_True; | |
881 | } | |
882 | ||
883 | Standard_Integer nbp = aWLine->NbPnts(); | |
884 | const IntSurf_PntOn2S& p1 = aWLine->Point(1); | |
885 | const IntSurf_PntOn2S& p2 = aWLine->Point(nbp); | |
886 | ||
887 | const gp_Pnt& P1 = p1.Value(); | |
888 | const gp_Pnt& P2 = p2.Value(); | |
889 | ||
890 | if(P1.SquareDistance(P2) < 1.e-14) { | |
891 | bAvoidLineConstructor = Standard_False; | |
892 | } | |
893 | ||
894 | } | |
895 | // | |
896 | // Line Constructor | |
897 | if(!bAvoidLineConstructor) { | |
898 | myLConstruct.Perform(L); | |
899 | // | |
900 | bDone=myLConstruct.IsDone(); | |
901 | aNbParts=myLConstruct.NbParts(); | |
902 | if (!bDone|| !aNbParts) { | |
903 | return; | |
904 | } | |
905 | } | |
906 | // Do the Curve | |
907 | ||
908 | ||
909 | typl=L->ArcType(); | |
910 | switch (typl) { | |
911 | //######################################## | |
912 | // Line, Parabola, Hyperbola | |
913 | //######################################## | |
914 | case IntPatch_Lin: | |
915 | case IntPatch_Parabola: | |
916 | case IntPatch_Hyperbola: { | |
917 | if (typl == IntPatch_Lin) { | |
918 | newc = | |
919 | new Geom_Line (Handle(IntPatch_GLine)::DownCast(L)->Line()); | |
920 | } | |
921 | ||
922 | else if (typl == IntPatch_Parabola) { | |
923 | newc = | |
924 | new Geom_Parabola(Handle(IntPatch_GLine)::DownCast(L)->Parabola()); | |
925 | } | |
926 | ||
927 | else if (typl == IntPatch_Hyperbola) { | |
928 | newc = | |
929 | new Geom_Hyperbola (Handle(IntPatch_GLine)::DownCast(L)->Hyperbola()); | |
930 | } | |
931 | // | |
932 | // myTolReached3d | |
933 | if (typl == IntPatch_Lin) { | |
934 | TolR3d (myFace1, myFace2, myTolReached3d); | |
935 | } | |
936 | // | |
937 | aNbParts=myLConstruct.NbParts(); | |
938 | for (i=1; i<=aNbParts; i++) { | |
939 | myLConstruct.Part(i, fprm, lprm); | |
940 | ||
941 | if (!Precision::IsNegativeInfinite(fprm) && | |
942 | !Precision::IsPositiveInfinite(lprm)) { | |
943 | // | |
944 | IntTools_Curve aCurve; | |
945 | // | |
946 | Handle(Geom_TrimmedCurve) aCT3D=new Geom_TrimmedCurve(newc, fprm, lprm); | |
947 | aCurve.SetCurve(aCT3D); | |
948 | if (typl == IntPatch_Parabola) { | |
949 | Standard_Real aTolF1, aTolF2, aTolBase; | |
950 | ||
951 | aTolF1 = BRep_Tool::Tolerance(myFace1); | |
952 | aTolF2 = BRep_Tool::Tolerance(myFace2); | |
953 | aTolBase=aTolF1+aTolF2; | |
954 | myTolReached3d=IntTools_Tools::CurveTolerance(aCT3D, aTolBase); | |
955 | } | |
956 | // | |
957 | aCurve.SetCurve(new Geom_TrimmedCurve(newc, fprm, lprm)); | |
958 | if(myApprox1) { | |
959 | Handle (Geom2d_Curve) C2d; | |
960 | BuildPCurves(fprm, lprm, Tolpc, myHS1->ChangeSurface().Surface(), newc, C2d); | |
961 | if(Tolpc>myTolReached2d || myTolReached2d==0.) { | |
962 | myTolReached2d=Tolpc; | |
963 | } | |
964 | // | |
965 | aCurve.SetFirstCurve2d(new Geom2d_TrimmedCurve(C2d,fprm,lprm)); | |
966 | } | |
967 | else { | |
968 | Handle(Geom2d_BSplineCurve) H1; | |
969 | // | |
970 | aCurve.SetFirstCurve2d(H1); | |
971 | } | |
972 | ||
973 | if(myApprox2) { | |
974 | Handle (Geom2d_Curve) C2d; | |
975 | BuildPCurves(fprm,lprm,Tolpc,myHS2->ChangeSurface().Surface(),newc,C2d); | |
976 | if(Tolpc>myTolReached2d || myTolReached2d==0.) { | |
977 | myTolReached2d=Tolpc; | |
978 | } | |
979 | // | |
980 | aCurve.SetSecondCurve2d(new Geom2d_TrimmedCurve(C2d,fprm,lprm)); | |
981 | } | |
982 | else { | |
983 | Handle(Geom2d_BSplineCurve) H1; | |
984 | // | |
985 | aCurve.SetSecondCurve2d(H1); | |
986 | } | |
987 | mySeqOfCurve.Append(aCurve); | |
988 | } // end of if (!Precision::IsNegativeInfinite(fprm) && !Precision::IsPositiveInfinite(lprm)) | |
989 | ||
990 | else { | |
0fc4f2e2 | 991 | // on regarde si on garde |
7fd59977 | 992 | // |
993 | Standard_Boolean bFNIt, bLPIt; | |
994 | Standard_Real aTestPrm, dT=100.; | |
995 | ||
996 | bFNIt=Precision::IsNegativeInfinite(fprm); | |
997 | bLPIt=Precision::IsPositiveInfinite(lprm); | |
998 | ||
999 | aTestPrm=0.; | |
1000 | ||
1001 | if (bFNIt && !bLPIt) { | |
1002 | aTestPrm=lprm-dT; | |
1003 | } | |
1004 | else if (!bFNIt && bLPIt) { | |
1005 | aTestPrm=fprm+dT; | |
1006 | } | |
1007 | ||
1008 | gp_Pnt ptref(newc->Value(aTestPrm)); | |
1009 | // | |
1010 | ||
1011 | Standard_Real u1, v1, u2, v2, Tol; | |
1012 | ||
1013 | Tol = Precision::Confusion(); | |
1014 | Parameters(myHS1, myHS2, ptref, u1, v1, u2, v2); | |
1015 | ok = (dom1->Classify(gp_Pnt2d(u1, v1), Tol) != TopAbs_OUT); | |
1016 | if(ok) { | |
1017 | ok = (dom2->Classify(gp_Pnt2d(u2,v2),Tol) != TopAbs_OUT); | |
1018 | } | |
1019 | if (ok) { | |
1020 | Handle(Geom2d_BSplineCurve) H1; | |
1021 | mySeqOfCurve.Append(IntTools_Curve(newc, H1, H1)); | |
1022 | } | |
1023 | } | |
1024 | }// end of for (i=1; i<=myLConstruct.NbParts(); i++) | |
1025 | }// case IntPatch_Lin: case IntPatch_Parabola: case IntPatch_Hyperbola: | |
1026 | break; | |
1027 | ||
1028 | //######################################## | |
1029 | // Circle and Ellipse | |
1030 | //######################################## | |
1031 | case IntPatch_Circle: | |
1032 | case IntPatch_Ellipse: { | |
1033 | ||
1034 | if (typl == IntPatch_Circle) { | |
1035 | newc = new Geom_Circle | |
1036 | (Handle(IntPatch_GLine)::DownCast(L)->Circle()); | |
1037 | } | |
1038 | else { //IntPatch_Ellipse | |
1039 | newc = new Geom_Ellipse | |
1040 | (Handle(IntPatch_GLine)::DownCast(L)->Ellipse()); | |
1041 | } | |
1042 | // | |
1043 | // myTolReached3d | |
1044 | TolR3d (myFace1, myFace2, myTolReached3d); | |
1045 | // | |
1046 | aNbParts=myLConstruct.NbParts(); | |
1047 | // | |
1048 | Standard_Real aPeriod, aNul; | |
1049 | TColStd_SequenceOfReal aSeqFprm, aSeqLprm; | |
1050 | ||
1051 | aNul=0.; | |
1052 | aPeriod=PI+PI; | |
1053 | ||
1054 | for (i=1; i<=aNbParts; i++) { | |
1055 | myLConstruct.Part(i, fprm, lprm); | |
1056 | ||
1057 | if (fprm < aNul && lprm > aNul) { | |
1058 | // interval that goes through 0. is divided on two intervals; | |
1059 | while (fprm<aNul || fprm>aPeriod) fprm=fprm+aPeriod; | |
1060 | while (lprm<aNul || lprm>aPeriod) lprm=lprm+aPeriod; | |
1061 | // | |
1062 | if((aPeriod - fprm) > Tolpc) { | |
1063 | aSeqFprm.Append(fprm); | |
1064 | aSeqLprm.Append(aPeriod); | |
1065 | } | |
1066 | else { | |
1067 | gp_Pnt P1 = newc->Value(fprm); | |
1068 | gp_Pnt P2 = newc->Value(aPeriod); | |
1069 | Standard_Real aTolDist = BRep_Tool::Tolerance(myFace1) + BRep_Tool::Tolerance(myFace2); | |
1070 | aTolDist = (myTolReached3d > aTolDist) ? myTolReached3d : aTolDist; | |
1071 | ||
1072 | if(P1.Distance(P2) > aTolDist) { | |
1073 | Standard_Real anewpar = fprm; | |
1074 | ||
1075 | if(ParameterOutOfBoundary(fprm, newc, myFace1, myFace2, lprm, Standard_False, anewpar)) { | |
1076 | fprm = anewpar; | |
1077 | } | |
1078 | aSeqFprm.Append(fprm); | |
1079 | aSeqLprm.Append(aPeriod); | |
1080 | } | |
1081 | } | |
1082 | ||
1083 | // | |
1084 | if((lprm - aNul) > Tolpc) { | |
1085 | aSeqFprm.Append(aNul); | |
1086 | aSeqLprm.Append(lprm); | |
1087 | } | |
1088 | else { | |
1089 | gp_Pnt P1 = newc->Value(aNul); | |
1090 | gp_Pnt P2 = newc->Value(lprm); | |
1091 | Standard_Real aTolDist = BRep_Tool::Tolerance(myFace1) + BRep_Tool::Tolerance(myFace2); | |
1092 | aTolDist = (myTolReached3d > aTolDist) ? myTolReached3d : aTolDist; | |
1093 | ||
1094 | if(P1.Distance(P2) > aTolDist) { | |
1095 | Standard_Real anewpar = lprm; | |
1096 | ||
1097 | if(ParameterOutOfBoundary(lprm, newc, myFace1, myFace2, fprm, Standard_True, anewpar)) { | |
1098 | lprm = anewpar; | |
1099 | } | |
1100 | aSeqFprm.Append(aNul); | |
1101 | aSeqLprm.Append(lprm); | |
1102 | } | |
1103 | } | |
1104 | } | |
1105 | else { | |
1106 | // usual interval | |
1107 | aSeqFprm.Append(fprm); | |
1108 | aSeqLprm.Append(lprm); | |
1109 | } | |
1110 | } | |
1111 | ||
1112 | // | |
1113 | aNbParts=aSeqFprm.Length(); | |
1114 | for (i=1; i<=aNbParts; i++) { | |
1115 | fprm=aSeqFprm(i); | |
1116 | lprm=aSeqLprm(i); | |
1117 | // | |
1118 | Standard_Real aRealEpsilon=RealEpsilon(); | |
1119 | if (Abs(fprm) > aRealEpsilon || Abs(lprm-2.*PI) > aRealEpsilon) { | |
1120 | //============================================== | |
1121 | //// | |
1122 | IntTools_Curve aCurve; | |
1123 | Handle(Geom_TrimmedCurve) aTC3D=new Geom_TrimmedCurve(newc,fprm,lprm); | |
1124 | aCurve.SetCurve(aTC3D); | |
1125 | fprm=aTC3D->FirstParameter(); | |
1126 | lprm=aTC3D->LastParameter (); | |
1127 | //// | |
1128 | if (typl == IntPatch_Circle || typl == IntPatch_Ellipse) {//// | |
1129 | if(myApprox1) { | |
1130 | Handle (Geom2d_Curve) C2d; | |
1131 | BuildPCurves(fprm,lprm,Tolpc,myHS1->ChangeSurface().Surface(),newc,C2d); | |
1132 | if(Tolpc>myTolReached2d || myTolReached2d==0) { | |
1133 | myTolReached2d=Tolpc; | |
1134 | } | |
1135 | // | |
1136 | aCurve.SetFirstCurve2d(C2d); | |
1137 | } | |
1138 | else { //// | |
1139 | Handle(Geom2d_BSplineCurve) H1; | |
1140 | aCurve.SetFirstCurve2d(H1); | |
1141 | } | |
1142 | ||
1143 | ||
1144 | if(myApprox2) { | |
1145 | Handle (Geom2d_Curve) C2d; | |
1146 | BuildPCurves(fprm,lprm,Tolpc,myHS2->ChangeSurface().Surface(),newc,C2d); | |
1147 | if(Tolpc>myTolReached2d || myTolReached2d==0) { | |
1148 | myTolReached2d=Tolpc; | |
1149 | } | |
1150 | // | |
1151 | aCurve.SetSecondCurve2d(C2d); | |
1152 | } | |
1153 | else { | |
1154 | Handle(Geom2d_BSplineCurve) H1; | |
1155 | aCurve.SetSecondCurve2d(H1); | |
1156 | } | |
1157 | } | |
1158 | ||
1159 | else { | |
1160 | Handle(Geom2d_BSplineCurve) H1; | |
1161 | aCurve.SetFirstCurve2d(H1); | |
1162 | aCurve.SetSecondCurve2d(H1); | |
1163 | } | |
1164 | mySeqOfCurve.Append(aCurve); | |
1165 | //============================================== | |
1166 | } //if (Abs(fprm) > RealEpsilon() || Abs(lprm-2.*PI) > RealEpsilon()) | |
1167 | ||
1168 | else { | |
1169 | // on regarde si on garde | |
1170 | // | |
1171 | if (aNbParts==1) { | |
1172 | // if (Abs(fprm) < RealEpsilon() && Abs(lprm-2.*PI) < RealEpsilon()) { | |
1173 | if (Abs(fprm) <= aRealEpsilon && Abs(lprm-2.*PI) <= aRealEpsilon) { | |
1174 | IntTools_Curve aCurve; | |
1175 | Handle(Geom_TrimmedCurve) aTC3D=new Geom_TrimmedCurve(newc,fprm,lprm); | |
1176 | aCurve.SetCurve(aTC3D); | |
1177 | fprm=aTC3D->FirstParameter(); | |
1178 | lprm=aTC3D->LastParameter (); | |
1179 | ||
1180 | if(myApprox1) { | |
1181 | Handle (Geom2d_Curve) C2d; | |
1182 | BuildPCurves(fprm,lprm,Tolpc,myHS1->ChangeSurface().Surface(),newc,C2d); | |
1183 | if(Tolpc>myTolReached2d || myTolReached2d==0) { | |
1184 | myTolReached2d=Tolpc; | |
1185 | } | |
1186 | // | |
1187 | aCurve.SetFirstCurve2d(C2d); | |
1188 | } | |
1189 | else { //// | |
1190 | Handle(Geom2d_BSplineCurve) H1; | |
1191 | aCurve.SetFirstCurve2d(H1); | |
1192 | } | |
1193 | ||
1194 | if(myApprox2) { | |
1195 | Handle (Geom2d_Curve) C2d; | |
1196 | BuildPCurves(fprm,lprm,Tolpc,myHS2->ChangeSurface().Surface(),newc,C2d); | |
1197 | if(Tolpc>myTolReached2d || myTolReached2d==0) { | |
1198 | myTolReached2d=Tolpc; | |
1199 | } | |
1200 | // | |
1201 | aCurve.SetSecondCurve2d(C2d); | |
1202 | } | |
1203 | else { | |
1204 | Handle(Geom2d_BSplineCurve) H1; | |
1205 | aCurve.SetSecondCurve2d(H1); | |
1206 | } | |
1207 | mySeqOfCurve.Append(aCurve); | |
1208 | break; | |
1209 | } | |
1210 | } | |
1211 | // | |
1212 | Standard_Real aTwoPIdiv17, u1, v1, u2, v2, Tol; | |
1213 | ||
1214 | aTwoPIdiv17=2.*PI/17.; | |
1215 | ||
1216 | for (j=0; j<=17; j++) { | |
1217 | gp_Pnt ptref (newc->Value (j*aTwoPIdiv17)); | |
1218 | Tol = Precision::Confusion(); | |
1219 | ||
1220 | Parameters(myHS1, myHS2, ptref, u1, v1, u2, v2); | |
1221 | ok = (dom1->Classify(gp_Pnt2d(u1,v1),Tol) != TopAbs_OUT); | |
1222 | if(ok) { | |
1223 | ok = (dom2->Classify(gp_Pnt2d(u2,v2),Tol) != TopAbs_OUT); | |
1224 | } | |
1225 | if (ok) { | |
1226 | IntTools_Curve aCurve; | |
1227 | aCurve.SetCurve(newc); | |
1228 | //============================================== | |
1229 | if (typl == IntPatch_Circle || typl == IntPatch_Ellipse) { | |
1230 | ||
1231 | if(myApprox1) { | |
1232 | Handle (Geom2d_Curve) C2d; | |
1233 | BuildPCurves(fprm, lprm, Tolpc, myHS1->ChangeSurface().Surface(), newc, C2d); | |
1234 | if(Tolpc>myTolReached2d || myTolReached2d==0) { | |
1235 | myTolReached2d=Tolpc; | |
1236 | } | |
1237 | // | |
1238 | aCurve.SetFirstCurve2d(C2d); | |
1239 | } | |
1240 | else { | |
1241 | Handle(Geom2d_BSplineCurve) H1; | |
1242 | aCurve.SetFirstCurve2d(H1); | |
1243 | } | |
1244 | ||
1245 | if(myApprox2) { | |
1246 | Handle (Geom2d_Curve) C2d; | |
1247 | BuildPCurves(fprm, lprm, Tolpc,myHS2->ChangeSurface().Surface(), newc, C2d); | |
1248 | if(Tolpc>myTolReached2d || myTolReached2d==0) { | |
1249 | myTolReached2d=Tolpc; | |
1250 | } | |
1251 | // | |
1252 | aCurve.SetSecondCurve2d(C2d); | |
1253 | } | |
1254 | ||
1255 | else { | |
1256 | Handle(Geom2d_BSplineCurve) H1; | |
1257 | aCurve.SetSecondCurve2d(H1); | |
1258 | } | |
1259 | }// end of if (typl == IntPatch_Circle || typl == IntPatch_Ellipse) | |
1260 | ||
1261 | else { | |
1262 | Handle(Geom2d_BSplineCurve) H1; | |
1263 | // | |
1264 | aCurve.SetFirstCurve2d(H1); | |
1265 | aCurve.SetSecondCurve2d(H1); | |
1266 | } | |
1267 | //============================================== | |
1268 | // | |
1269 | mySeqOfCurve.Append(aCurve); | |
1270 | break; | |
1271 | ||
1272 | }// end of if (ok) { | |
1273 | }// end of for (Standard_Integer j=0; j<=17; j++) | |
0fc4f2e2 | 1274 | }// end of else { on regarde si on garde |
7fd59977 | 1275 | }// for (i=1; i<=myLConstruct.NbParts(); i++) |
1276 | }// IntPatch_Circle: IntPatch_Ellipse: | |
1277 | break; | |
1278 | ||
1279 | case IntPatch_Analytic: { | |
1280 | IntSurf_Quadric quad1,quad2; | |
1281 | GeomAbs_SurfaceType typs = myHS1->Surface().GetType(); | |
1282 | ||
1283 | switch (typs) { | |
1284 | case GeomAbs_Plane: | |
1285 | quad1.SetValue(myHS1->Surface().Plane()); | |
1286 | break; | |
1287 | case GeomAbs_Cylinder: | |
1288 | quad1.SetValue(myHS1->Surface().Cylinder()); | |
1289 | break; | |
1290 | case GeomAbs_Cone: | |
1291 | quad1.SetValue(myHS1->Surface().Cone()); | |
1292 | break; | |
1293 | case GeomAbs_Sphere: | |
1294 | quad1.SetValue(myHS1->Surface().Sphere()); | |
1295 | break; | |
1296 | default: | |
1297 | Standard_ConstructionError::Raise("GeomInt_IntSS::MakeCurve 1"); | |
1298 | } | |
1299 | ||
1300 | typs = myHS2->Surface().GetType(); | |
1301 | ||
1302 | switch (typs) { | |
1303 | case GeomAbs_Plane: | |
1304 | quad2.SetValue(myHS2->Surface().Plane()); | |
1305 | break; | |
1306 | case GeomAbs_Cylinder: | |
1307 | quad2.SetValue(myHS2->Surface().Cylinder()); | |
1308 | break; | |
1309 | case GeomAbs_Cone: | |
1310 | quad2.SetValue(myHS2->Surface().Cone()); | |
1311 | break; | |
1312 | case GeomAbs_Sphere: | |
1313 | quad2.SetValue(myHS2->Surface().Sphere()); | |
1314 | break; | |
1315 | default: | |
1316 | Standard_ConstructionError::Raise("GeomInt_IntSS::MakeCurve 2"); | |
1317 | } | |
1318 | // | |
1319 | //========= | |
1320 | IntPatch_ALineToWLine convert (quad1, quad2); | |
1321 | ||
1322 | if (!myApprox) { | |
1323 | aNbParts=myLConstruct.NbParts(); | |
1324 | for (i=1; i<=aNbParts; i++) { | |
1325 | myLConstruct.Part(i, fprm, lprm); | |
1326 | Handle(IntPatch_WLine) WL = | |
1327 | convert.MakeWLine(Handle(IntPatch_ALine)::DownCast(L), fprm, lprm); | |
1328 | // | |
1329 | Handle(Geom2d_BSplineCurve) H1; | |
1330 | Handle(Geom2d_BSplineCurve) H2; | |
1331 | ||
1332 | if(myApprox1) { | |
1333 | H1 = MakeBSpline2d(WL, 1, WL->NbPnts(), Standard_True); | |
1334 | } | |
1335 | ||
1336 | if(myApprox2) { | |
1337 | H2 = MakeBSpline2d(WL, 1, WL->NbPnts(), Standard_False); | |
1338 | } | |
1339 | // | |
1340 | mySeqOfCurve.Append(IntTools_Curve(MakeBSpline(WL,1,WL->NbPnts()), H1, H2)); | |
1341 | } | |
1342 | } // if (!myApprox) | |
1343 | ||
1344 | else { // myApprox=TRUE | |
1345 | GeomInt_WLApprox theapp3d; | |
1346 | // | |
1347 | Standard_Real tol2d = myTolApprox; | |
1348 | // | |
1349 | theapp3d.SetParameters(myTolApprox, tol2d, 4, 8, 0, Standard_True); | |
1350 | ||
1351 | aNbParts=myLConstruct.NbParts(); | |
1352 | for (i=1; i<=aNbParts; i++) { | |
1353 | myLConstruct.Part(i, fprm, lprm); | |
1354 | Handle(IntPatch_WLine) WL = | |
1355 | convert.MakeWLine(Handle(IntPatch_ALine):: DownCast(L),fprm,lprm); | |
1356 | ||
1357 | theapp3d.Perform(myHS1,myHS2,WL,Standard_True,myApprox1,myApprox2, 1, WL->NbPnts()); | |
1358 | ||
1359 | if (!theapp3d.IsDone()) { | |
1360 | // | |
1361 | Handle(Geom2d_BSplineCurve) H1; | |
1362 | Handle(Geom2d_BSplineCurve) H2; | |
1363 | ||
1364 | if(myApprox1) { | |
1365 | H1 = MakeBSpline2d(WL, 1, WL->NbPnts(), Standard_True); | |
1366 | } | |
1367 | ||
1368 | if(myApprox2) { | |
1369 | H2 = MakeBSpline2d(WL, 1, WL->NbPnts(), Standard_False); | |
1370 | } | |
1371 | // | |
1372 | mySeqOfCurve.Append(IntTools_Curve(MakeBSpline(WL,1,WL->NbPnts()), H1, H2)); | |
1373 | } | |
1374 | ||
1375 | else { | |
1376 | if(myApprox1 || myApprox2) { | |
1377 | if( theapp3d.TolReached2d()>myTolReached2d || myTolReached2d==0) { | |
1378 | myTolReached2d = theapp3d.TolReached2d(); | |
1379 | } | |
1380 | } | |
1381 | ||
1382 | if( theapp3d.TolReached3d()>myTolReached3d || myTolReached3d==0) { | |
1383 | myTolReached3d = theapp3d.TolReached3d(); | |
1384 | } | |
1385 | ||
1386 | Standard_Integer aNbMultiCurves, nbpoles; | |
1387 | aNbMultiCurves=theapp3d.NbMultiCurves(); | |
1388 | for (j=1; j<=aNbMultiCurves; j++) { | |
1389 | const AppParCurves_MultiBSpCurve& mbspc = theapp3d.Value(j); | |
1390 | nbpoles = mbspc.NbPoles(); | |
1391 | ||
1392 | TColgp_Array1OfPnt tpoles(1, nbpoles); | |
1393 | mbspc.Curve(1, tpoles); | |
1394 | Handle(Geom_BSplineCurve) BS=new Geom_BSplineCurve(tpoles, | |
1395 | mbspc.Knots(), | |
1396 | mbspc.Multiplicities(), | |
1397 | mbspc.Degree()); | |
1398 | ||
1399 | GeomLib_CheckBSplineCurve Check(BS,TOLCHECK,TOLANGCHECK); | |
1400 | Check.FixTangent(Standard_True,Standard_True); | |
1401 | // | |
1402 | IntTools_Curve aCurve; | |
1403 | aCurve.SetCurve(BS); | |
1404 | ||
1405 | if(myApprox1) { | |
1406 | TColgp_Array1OfPnt2d tpoles2d(1,nbpoles); | |
1407 | mbspc.Curve(2,tpoles2d); | |
1408 | Handle(Geom2d_BSplineCurve) BS2=new Geom2d_BSplineCurve(tpoles2d, | |
1409 | mbspc.Knots(), | |
1410 | mbspc.Multiplicities(), | |
1411 | mbspc.Degree()); | |
1412 | ||
1413 | GeomLib_Check2dBSplineCurve newCheck(BS2,TOLCHECK,TOLANGCHECK); | |
1414 | newCheck.FixTangent(Standard_True,Standard_True); | |
1415 | // | |
1416 | aCurve.SetFirstCurve2d(BS2); | |
1417 | } | |
1418 | else { | |
1419 | Handle(Geom2d_BSplineCurve) H1; | |
1420 | aCurve.SetFirstCurve2d(H1); | |
1421 | } | |
1422 | ||
1423 | if(myApprox2) { | |
1424 | TColgp_Array1OfPnt2d tpoles2d(1, nbpoles); | |
1425 | Standard_Integer TwoOrThree; | |
1426 | TwoOrThree=myApprox1 ? 3 : 2; | |
1427 | mbspc.Curve(TwoOrThree, tpoles2d); | |
1428 | Handle(Geom2d_BSplineCurve) BS2 =new Geom2d_BSplineCurve(tpoles2d, | |
1429 | mbspc.Knots(), | |
1430 | mbspc.Multiplicities(), | |
1431 | mbspc.Degree()); | |
1432 | ||
1433 | GeomLib_Check2dBSplineCurve newCheck(BS2,TOLCHECK,TOLANGCHECK); | |
1434 | newCheck.FixTangent(Standard_True,Standard_True); | |
1435 | // | |
1436 | aCurve.SetSecondCurve2d(BS2); | |
1437 | } | |
1438 | else { | |
1439 | Handle(Geom2d_BSplineCurve) H2; | |
1440 | aCurve.SetSecondCurve2d(H2); | |
1441 | } | |
1442 | // | |
1443 | mySeqOfCurve.Append(aCurve); | |
1444 | ||
1445 | }// for (j=1; j<=aNbMultiCurves; j++) { | |
1446 | }// else from if (!theapp3d.IsDone()) | |
1447 | }// for (i=1; i<=aNbParts; i++) { | |
1448 | }// else { // myApprox=TRUE | |
1449 | }// case IntPatch_Analytic: | |
1450 | break; | |
1451 | ||
1452 | case IntPatch_Walking:{ | |
1453 | Handle(IntPatch_WLine) WL = | |
1454 | Handle(IntPatch_WLine)::DownCast(L); | |
1455 | // | |
1456 | Standard_Integer ifprm, ilprm; | |
1457 | // | |
1458 | if (!myApprox) { | |
1459 | aNbParts = 1; | |
1460 | if(!bAvoidLineConstructor){ | |
1461 | aNbParts=myLConstruct.NbParts(); | |
1462 | } | |
1463 | for (i=1; i<=aNbParts; ++i) { | |
1464 | Handle(Geom2d_BSplineCurve) H1, H2; | |
1465 | Handle(Geom_Curve) aBSp; | |
1466 | // | |
1467 | if(bAvoidLineConstructor) { | |
1468 | ifprm = 1; | |
1469 | ilprm = WL->NbPnts(); | |
1470 | } | |
1471 | else { | |
1472 | myLConstruct.Part(i, fprm, lprm); | |
1473 | ifprm=(Standard_Integer)fprm; | |
1474 | ilprm=(Standard_Integer)lprm; | |
1475 | } | |
1476 | // | |
1477 | if(myApprox1) { | |
1478 | H1 = MakeBSpline2d(WL, ifprm, ilprm, Standard_True); | |
1479 | } | |
1480 | // | |
1481 | if(myApprox2) { | |
1482 | H2 = MakeBSpline2d(WL, ifprm, ilprm, Standard_False); | |
1483 | } | |
1484 | // | |
1485 | aBSp=MakeBSpline(WL, ifprm, ilprm); | |
1486 | IntTools_Curve aIC(aBSp, H1, H2); | |
1487 | mySeqOfCurve.Append(aIC); | |
1488 | }// for (i=1; i<=aNbParts; ++i) { | |
1489 | }// if (!myApprox) { | |
1490 | // | |
1491 | else { // X | |
1492 | Standard_Boolean bIsDecomposited; | |
1493 | Standard_Integer nbiter, aNbSeqOfL; | |
1494 | Standard_Real tol2d; | |
1495 | IntPatch_SequenceOfLine aSeqOfL; | |
1496 | GeomInt_WLApprox theapp3d; | |
1497 | Approx_ParametrizationType aParType = Approx_ChordLength; | |
1498 | // | |
1499 | Standard_Boolean anApprox1 = myApprox1; | |
1500 | Standard_Boolean anApprox2 = myApprox2; | |
1501 | ||
1502 | tol2d = myTolApprox; | |
1503 | ||
1504 | GeomAbs_SurfaceType typs1, typs2; | |
1505 | typs1 = myHS1->Surface().GetType(); | |
1506 | typs2 = myHS2->Surface().GetType(); | |
1507 | Standard_Boolean anWithPC = Standard_True; | |
1508 | ||
1509 | if(typs1 == GeomAbs_Cylinder && typs2 == GeomAbs_Sphere) { | |
1510 | anWithPC = | |
1511 | ApproxWithPCurves(myHS1->Surface().Cylinder(), myHS2->Surface().Sphere()); | |
1512 | } | |
1513 | else if (typs1 == GeomAbs_Sphere && typs2 == GeomAbs_Cylinder) { | |
1514 | anWithPC = | |
1515 | ApproxWithPCurves(myHS2->Surface().Cylinder(), myHS1->Surface().Sphere()); | |
1516 | } | |
1517 | if(!anWithPC) { | |
1518 | //aParType = Approx_Centripetal; | |
1519 | myTolApprox = 1.e-5; | |
1520 | anApprox1 = Standard_False; | |
1521 | anApprox2 = Standard_False; | |
1522 | // | |
1523 | tol2d = myTolApprox; | |
1524 | } | |
1525 | ||
1526 | if(myHS1 == myHS2) { | |
1527 | // | |
1528 | theapp3d.SetParameters(myTolApprox, tol2d, 4, 8, 0, Standard_False, aParType); | |
1529 | rejectSurface = Standard_True; | |
1530 | } | |
1531 | else { | |
1532 | if(reApprox && !rejectSurface) | |
1533 | theapp3d.SetParameters(myTolApprox, tol2d, 4, 8, 0, Standard_False, aParType); | |
1534 | else { | |
0fc4f2e2 | 1535 | Standard_Integer iDegMax, iDegMin; |
7fd59977 | 1536 | // |
0fc4f2e2 P |
1537 | ApproxParameters(myHS1, myHS2, iDegMin, iDegMax); |
1538 | theapp3d.SetParameters(myTolApprox, tol2d, iDegMin, iDegMax, 0, Standard_True, aParType); | |
7fd59977 | 1539 | } |
1540 | } | |
1541 | // | |
1542 | Standard_Real aReachedTol = Precision::Confusion(); | |
1543 | bIsDecomposited=DecompositionOfWLine(WL, | |
1544 | myHS1, | |
1545 | myHS2, | |
1546 | myFace1, | |
1547 | myFace2, | |
1548 | myLConstruct, | |
1549 | bAvoidLineConstructor, | |
1550 | aSeqOfL, | |
1551 | aReachedTol); | |
1552 | if ( bIsDecomposited && ( myTolReached3d < aReachedTol ) ) | |
1553 | myTolReached3d = aReachedTol; | |
1554 | ||
1555 | // | |
1556 | aNbSeqOfL=aSeqOfL.Length(); | |
1557 | // | |
1558 | if (bIsDecomposited) { | |
1559 | nbiter=aNbSeqOfL; | |
1560 | } | |
1561 | else { | |
1562 | nbiter=1; | |
1563 | aNbParts=1; | |
1564 | if (!bAvoidLineConstructor) { | |
1565 | aNbParts=myLConstruct.NbParts(); | |
1566 | nbiter=aNbParts; | |
1567 | } | |
1568 | } | |
1569 | // | |
1570 | // nbiter=(bIsDecomposited) ? aSeqOfL.Length() : | |
1571 | // ((bAvoidLineConstructor) ? 1 :aNbParts); | |
1572 | // | |
1573 | for(i = 1; i <= nbiter; ++i) { | |
1574 | if(bIsDecomposited) { | |
1575 | WL = Handle(IntPatch_WLine)::DownCast(aSeqOfL.Value(i)); | |
1576 | ifprm = 1; | |
1577 | ilprm = WL->NbPnts(); | |
1578 | } | |
1579 | else { | |
1580 | if(bAvoidLineConstructor) { | |
1581 | ifprm = 1; | |
1582 | ilprm = WL->NbPnts(); | |
1583 | } | |
1584 | else { | |
1585 | myLConstruct.Part(i, fprm, lprm); | |
1586 | ifprm = (Standard_Integer)fprm; | |
1587 | ilprm = (Standard_Integer)lprm; | |
1588 | } | |
1589 | } | |
0fc4f2e2 P |
1590 | //-- lbr : |
1591 | //-- Si une des surfaces est un plan , on approxime en 2d | |
1592 | //-- sur cette surface et on remonte les points 2d en 3d. | |
7fd59977 | 1593 | if(typs1 == GeomAbs_Plane) { |
1594 | theapp3d.Perform(myHS1, myHS2, WL, Standard_False,Standard_True, myApprox2,ifprm,ilprm); | |
1595 | } | |
1596 | else if(typs2 == GeomAbs_Plane) { | |
1597 | theapp3d.Perform(myHS1,myHS2,WL,Standard_False,myApprox1,Standard_True,ifprm,ilprm); | |
1598 | } | |
1599 | else { | |
1600 | // | |
1601 | if (myHS1 != myHS2){ | |
1602 | if ((typs1==GeomAbs_BezierSurface || typs1==GeomAbs_BSplineSurface) && | |
1603 | (typs2==GeomAbs_BezierSurface || typs2==GeomAbs_BSplineSurface)) { | |
1604 | ||
1605 | theapp3d.SetParameters(myTolApprox, tol2d, 4, 8, 0, Standard_True, aParType); | |
1606 | ||
1607 | Standard_Boolean bUseSurfaces; | |
1608 | bUseSurfaces=NotUseSurfacesForApprox(myFace1, myFace2, WL, ifprm, ilprm); | |
1609 | if (bUseSurfaces) { | |
1610 | // ###### | |
1611 | rejectSurface = Standard_True; | |
1612 | // ###### | |
1613 | theapp3d.SetParameters(myTolApprox, tol2d, 4, 8, 0, Standard_False, aParType); | |
1614 | } | |
1615 | } | |
1616 | } | |
1617 | // | |
1618 | theapp3d.Perform(myHS1,myHS2,WL,Standard_True,anApprox1,anApprox2,ifprm,ilprm); | |
1619 | } | |
1620 | ||
1621 | if (!theapp3d.IsDone()) { | |
1622 | // | |
1623 | Handle(Geom2d_BSplineCurve) H1; | |
1624 | // | |
1625 | Handle(Geom_Curve) aBSp=MakeBSpline(WL,ifprm, ilprm); | |
1626 | Handle(Geom2d_BSplineCurve) H2; | |
1627 | ||
1628 | if(myApprox1) { | |
1629 | H1 = MakeBSpline2d(WL, ifprm, ilprm, Standard_True); | |
1630 | } | |
1631 | ||
1632 | if(myApprox2) { | |
1633 | H2 = MakeBSpline2d(WL, ifprm, ilprm, Standard_False); | |
1634 | } | |
1635 | // | |
1636 | IntTools_Curve aIC(aBSp, H1, H2); | |
1637 | mySeqOfCurve.Append(aIC); | |
1638 | } | |
1639 | ||
1640 | else { | |
1641 | if(myApprox1 || myApprox2 || (typs1==GeomAbs_Plane || typs2==GeomAbs_Plane)) { | |
1642 | if( theapp3d.TolReached2d()>myTolReached2d || myTolReached2d==0.) { | |
1643 | myTolReached2d = theapp3d.TolReached2d(); | |
1644 | } | |
1645 | } | |
1646 | if(typs1==GeomAbs_Plane || typs2==GeomAbs_Plane) { | |
1647 | myTolReached3d = myTolReached2d; | |
1648 | // | |
1649 | if (typs1==GeomAbs_Torus || typs2==GeomAbs_Torus) { | |
1650 | if (myTolReached3d<1.e-6) { | |
1651 | myTolReached3d = theapp3d.TolReached3d(); | |
1652 | myTolReached3d=1.e-6; | |
1653 | } | |
1654 | } | |
1655 | // | |
1656 | } | |
1657 | else if( theapp3d.TolReached3d()>myTolReached3d || myTolReached3d==0.) { | |
1658 | myTolReached3d = theapp3d.TolReached3d(); | |
1659 | } | |
1660 | ||
1661 | Standard_Integer aNbMultiCurves, nbpoles; | |
1662 | aNbMultiCurves=theapp3d.NbMultiCurves(); | |
1663 | for (j=1; j<=aNbMultiCurves; j++) { | |
1664 | if(typs1 == GeomAbs_Plane) { | |
1665 | const AppParCurves_MultiBSpCurve& mbspc = theapp3d.Value(j); | |
1666 | nbpoles = mbspc.NbPoles(); | |
1667 | ||
1668 | TColgp_Array1OfPnt2d tpoles2d(1,nbpoles); | |
1669 | TColgp_Array1OfPnt tpoles(1,nbpoles); | |
1670 | ||
1671 | mbspc.Curve(1,tpoles2d); | |
1672 | const gp_Pln& Pln = myHS1->Surface().Plane(); | |
1673 | // | |
1674 | Standard_Integer ik; | |
1675 | for(ik = 1; ik<= nbpoles; ik++) { | |
1676 | tpoles.SetValue(ik, | |
1677 | ElSLib::Value(tpoles2d.Value(ik).X(), | |
1678 | tpoles2d.Value(ik).Y(), | |
1679 | Pln)); | |
1680 | } | |
1681 | // | |
1682 | Handle(Geom_BSplineCurve) BS = | |
1683 | new Geom_BSplineCurve(tpoles, | |
1684 | mbspc.Knots(), | |
1685 | mbspc.Multiplicities(), | |
1686 | mbspc.Degree()); | |
1687 | GeomLib_CheckBSplineCurve Check(BS,TOLCHECK,TOLANGCHECK); | |
1688 | Check.FixTangent(Standard_True, Standard_True); | |
1689 | // | |
1690 | IntTools_Curve aCurve; | |
1691 | aCurve.SetCurve(BS); | |
1692 | ||
1693 | if(myApprox1) { | |
1694 | Handle(Geom2d_BSplineCurve) BS1 = | |
1695 | new Geom2d_BSplineCurve(tpoles2d, | |
1696 | mbspc.Knots(), | |
1697 | mbspc.Multiplicities(), | |
1698 | mbspc.Degree()); | |
1699 | GeomLib_Check2dBSplineCurve Check1(BS1,TOLCHECK,TOLANGCHECK); | |
1700 | Check1.FixTangent(Standard_True,Standard_True); | |
1701 | // | |
1702 | // ############################################ | |
1703 | if(!rejectSurface && !reApprox) { | |
1704 | Standard_Boolean isValid = IsCurveValid(BS1); | |
1705 | if(!isValid) { | |
1706 | reApprox = Standard_True; | |
1707 | goto reapprox; | |
1708 | } | |
1709 | } | |
1710 | // ############################################ | |
1711 | aCurve.SetFirstCurve2d(BS1); | |
1712 | } | |
1713 | else { | |
1714 | Handle(Geom2d_BSplineCurve) H1; | |
1715 | aCurve.SetFirstCurve2d(H1); | |
1716 | } | |
1717 | ||
1718 | if(myApprox2) { | |
1719 | mbspc.Curve(2, tpoles2d); | |
1720 | ||
1721 | Handle(Geom2d_BSplineCurve) BS2 = new Geom2d_BSplineCurve(tpoles2d, | |
1722 | mbspc.Knots(), | |
1723 | mbspc.Multiplicities(), | |
1724 | mbspc.Degree()); | |
1725 | GeomLib_Check2dBSplineCurve newCheck(BS2,TOLCHECK,TOLANGCHECK); | |
1726 | newCheck.FixTangent(Standard_True,Standard_True); | |
1727 | ||
1728 | // ########################################### | |
1729 | if(!rejectSurface && !reApprox) { | |
1730 | Standard_Boolean isValid = IsCurveValid(BS2); | |
1731 | if(!isValid) { | |
1732 | reApprox = Standard_True; | |
1733 | goto reapprox; | |
1734 | } | |
1735 | } | |
1736 | // ########################################### | |
1737 | // | |
1738 | aCurve.SetSecondCurve2d(BS2); | |
1739 | } | |
1740 | else { | |
1741 | Handle(Geom2d_BSplineCurve) H2; | |
1742 | // | |
1743 | aCurve.SetSecondCurve2d(H2); | |
1744 | } | |
1745 | // | |
1746 | mySeqOfCurve.Append(aCurve); | |
1747 | } | |
1748 | ||
1749 | else if(typs2 == GeomAbs_Plane) { | |
1750 | const AppParCurves_MultiBSpCurve& mbspc = theapp3d.Value(j); | |
1751 | nbpoles = mbspc.NbPoles(); | |
1752 | ||
1753 | TColgp_Array1OfPnt2d tpoles2d(1,nbpoles); | |
1754 | TColgp_Array1OfPnt tpoles(1,nbpoles); | |
1755 | mbspc.Curve((myApprox1==Standard_True)? 2 : 1,tpoles2d); | |
1756 | const gp_Pln& Pln = myHS2->Surface().Plane(); | |
1757 | // | |
1758 | Standard_Integer ik; | |
1759 | for(ik = 1; ik<= nbpoles; ik++) { | |
1760 | tpoles.SetValue(ik, | |
1761 | ElSLib::Value(tpoles2d.Value(ik).X(), | |
1762 | tpoles2d.Value(ik).Y(), | |
1763 | Pln)); | |
1764 | ||
1765 | } | |
1766 | // | |
1767 | Handle(Geom_BSplineCurve) BS=new Geom_BSplineCurve(tpoles, | |
1768 | mbspc.Knots(), | |
1769 | mbspc.Multiplicities(), | |
1770 | mbspc.Degree()); | |
1771 | GeomLib_CheckBSplineCurve Check(BS,TOLCHECK,TOLANGCHECK); | |
1772 | Check.FixTangent(Standard_True,Standard_True); | |
1773 | // | |
1774 | IntTools_Curve aCurve; | |
1775 | aCurve.SetCurve(BS); | |
1776 | ||
1777 | if(myApprox2) { | |
1778 | Handle(Geom2d_BSplineCurve) BS1=new Geom2d_BSplineCurve(tpoles2d, | |
1779 | mbspc.Knots(), | |
1780 | mbspc.Multiplicities(), | |
1781 | mbspc.Degree()); | |
1782 | GeomLib_Check2dBSplineCurve Check1(BS1,TOLCHECK,TOLANGCHECK); | |
1783 | Check1.FixTangent(Standard_True,Standard_True); | |
1784 | // | |
1785 | // ########################################### | |
1786 | if(!rejectSurface && !reApprox) { | |
1787 | Standard_Boolean isValid = IsCurveValid(BS1); | |
1788 | if(!isValid) { | |
1789 | reApprox = Standard_True; | |
1790 | goto reapprox; | |
1791 | } | |
1792 | } | |
1793 | // ########################################### | |
1794 | aCurve.SetSecondCurve2d(BS1); | |
1795 | } | |
1796 | else { | |
1797 | Handle(Geom2d_BSplineCurve) H2; | |
1798 | aCurve.SetSecondCurve2d(H2); | |
1799 | } | |
1800 | ||
1801 | if(myApprox1) { | |
1802 | mbspc.Curve(1,tpoles2d); | |
1803 | Handle(Geom2d_BSplineCurve) BS2=new Geom2d_BSplineCurve(tpoles2d, | |
1804 | mbspc.Knots(), | |
1805 | mbspc.Multiplicities(), | |
1806 | mbspc.Degree()); | |
1807 | GeomLib_Check2dBSplineCurve Check2(BS2,TOLCHECK,TOLANGCHECK); | |
1808 | Check2.FixTangent(Standard_True,Standard_True); | |
1809 | // | |
1810 | // ########################################### | |
1811 | if(!rejectSurface && !reApprox) { | |
1812 | Standard_Boolean isValid = IsCurveValid(BS2); | |
1813 | if(!isValid) { | |
1814 | reApprox = Standard_True; | |
1815 | goto reapprox; | |
1816 | } | |
1817 | } | |
1818 | // ########################################### | |
1819 | aCurve.SetFirstCurve2d(BS2); | |
1820 | } | |
1821 | else { | |
1822 | Handle(Geom2d_BSplineCurve) H1; | |
1823 | // | |
1824 | aCurve.SetFirstCurve2d(H1); | |
1825 | } | |
1826 | // | |
1827 | mySeqOfCurve.Append(aCurve); | |
1828 | } | |
1829 | else { | |
1830 | const AppParCurves_MultiBSpCurve& mbspc = theapp3d.Value(j); | |
1831 | nbpoles = mbspc.NbPoles(); | |
1832 | TColgp_Array1OfPnt tpoles(1,nbpoles); | |
1833 | mbspc.Curve(1,tpoles); | |
1834 | Handle(Geom_BSplineCurve) BS=new Geom_BSplineCurve(tpoles, | |
1835 | mbspc.Knots(), | |
1836 | mbspc.Multiplicities(), | |
1837 | mbspc.Degree()); | |
1838 | GeomLib_CheckBSplineCurve Check(BS,TOLCHECK,TOLANGCHECK); | |
1839 | Check.FixTangent(Standard_True,Standard_True); | |
1840 | // | |
1841 | IntTools_Curve aCurve; | |
1842 | aCurve.SetCurve(BS); | |
1843 | ||
1844 | if(myApprox1) { | |
1845 | if(anApprox1) { | |
1846 | TColgp_Array1OfPnt2d tpoles2d(1,nbpoles); | |
1847 | mbspc.Curve(2,tpoles2d); | |
1848 | Handle(Geom2d_BSplineCurve) BS1=new Geom2d_BSplineCurve(tpoles2d, | |
1849 | mbspc.Knots(), | |
1850 | mbspc.Multiplicities(), | |
1851 | mbspc.Degree()); | |
1852 | GeomLib_Check2dBSplineCurve newCheck(BS1,TOLCHECK,TOLANGCHECK); | |
1853 | newCheck.FixTangent(Standard_True,Standard_True); | |
1854 | // | |
1855 | aCurve.SetFirstCurve2d(BS1); | |
1856 | } | |
1857 | else { | |
1858 | Handle(Geom2d_BSplineCurve) BS1; | |
1859 | fprm = BS->FirstParameter(); | |
1860 | lprm = BS->LastParameter(); | |
1861 | ||
1862 | Handle(Geom2d_Curve) C2d; | |
1863 | Standard_Real aTol = myTolApprox; | |
1864 | BuildPCurves(fprm, lprm, aTol, myHS1->ChangeSurface().Surface(), BS, C2d); | |
1865 | BS1 = Handle(Geom2d_BSplineCurve)::DownCast(C2d); | |
1866 | aCurve.SetFirstCurve2d(BS1); | |
1867 | } | |
1868 | ||
1869 | } | |
1870 | else { | |
1871 | Handle(Geom2d_BSplineCurve) H1; | |
1872 | // | |
1873 | aCurve.SetFirstCurve2d(H1); | |
1874 | } | |
1875 | if(myApprox2) { | |
1876 | if(anApprox2) { | |
1877 | TColgp_Array1OfPnt2d tpoles2d(1,nbpoles); | |
1878 | mbspc.Curve((myApprox1==Standard_True)? 3 : 2,tpoles2d); | |
1879 | Handle(Geom2d_BSplineCurve) BS2=new Geom2d_BSplineCurve(tpoles2d, | |
1880 | mbspc.Knots(), | |
1881 | mbspc.Multiplicities(), | |
1882 | mbspc.Degree()); | |
1883 | GeomLib_Check2dBSplineCurve newCheck(BS2,TOLCHECK,TOLANGCHECK); | |
1884 | newCheck.FixTangent(Standard_True,Standard_True); | |
1885 | // | |
1886 | aCurve.SetSecondCurve2d(BS2); | |
1887 | } | |
1888 | else { | |
1889 | Handle(Geom2d_BSplineCurve) BS2; | |
1890 | fprm = BS->FirstParameter(); | |
1891 | lprm = BS->LastParameter(); | |
1892 | ||
1893 | Handle(Geom2d_Curve) C2d; | |
1894 | Standard_Real aTol = myTolApprox; | |
1895 | BuildPCurves(fprm, lprm, aTol, myHS2->ChangeSurface().Surface(), BS, C2d); | |
1896 | BS2 = Handle(Geom2d_BSplineCurve)::DownCast(C2d); | |
1897 | aCurve.SetSecondCurve2d(BS2); | |
1898 | } | |
1899 | ||
1900 | } | |
1901 | else { | |
1902 | Handle(Geom2d_BSplineCurve) H2; | |
1903 | // | |
1904 | aCurve.SetSecondCurve2d(H2); | |
1905 | } | |
1906 | // | |
1907 | mySeqOfCurve.Append(aCurve); | |
1908 | } | |
1909 | } | |
1910 | } | |
1911 | } | |
1912 | }// else { // X | |
1913 | }// case IntPatch_Walking:{ | |
1914 | break; | |
1915 | ||
1916 | case IntPatch_Restriction: | |
1917 | break; | |
1918 | ||
1919 | } | |
1920 | } | |
1921 | ||
1922 | //======================================================================= | |
1923 | //function : BuildPCurves | |
1924 | //purpose : | |
1925 | //======================================================================= | |
1926 | void BuildPCurves (Standard_Real f, | |
1927 | Standard_Real l, | |
1928 | Standard_Real& Tol, | |
1929 | const Handle (Geom_Surface)& S, | |
1930 | const Handle (Geom_Curve)& C, | |
1931 | Handle (Geom2d_Curve)& C2d) | |
1932 | { | |
1933 | ||
1934 | Standard_Real umin,umax,vmin,vmax; | |
1935 | // | |
1936 | ||
1937 | if (C2d.IsNull()) { | |
1938 | ||
1939 | // in class ProjLib_Function the range of parameters is shrank by 1.e-09 | |
1940 | if((l - f) > 2.e-09) { | |
1941 | C2d = GeomProjLib::Curve2d(C,f,l,S,Tol); | |
1942 | // | |
1943 | if (C2d.IsNull()) { | |
1944 | // proj. a circle that goes through the pole on a sphere to the sphere | |
1945 | Tol=Tol+1.e-7; | |
1946 | C2d = GeomProjLib::Curve2d(C,f,l,S,Tol); | |
1947 | } | |
1948 | } | |
1949 | else { | |
1950 | if((l - f) > Epsilon(Abs(f))) { | |
1951 | GeomAPI_ProjectPointOnSurf aProjector1, aProjector2; | |
1952 | gp_Pnt P1 = C->Value(f); | |
1953 | gp_Pnt P2 = C->Value(l); | |
1954 | aProjector1.Init(P1, S); | |
1955 | aProjector2.Init(P2, S); | |
1956 | ||
1957 | if(aProjector1.IsDone() && aProjector2.IsDone()) { | |
1958 | Standard_Real U=0., V=0.; | |
1959 | aProjector1.LowerDistanceParameters(U, V); | |
1960 | gp_Pnt2d p1(U, V); | |
1961 | ||
1962 | aProjector2.LowerDistanceParameters(U, V); | |
1963 | gp_Pnt2d p2(U, V); | |
1964 | ||
1965 | if(p1.Distance(p2) > gp::Resolution()) { | |
1966 | TColgp_Array1OfPnt2d poles(1,2); | |
1967 | TColStd_Array1OfReal knots(1,2); | |
1968 | TColStd_Array1OfInteger mults(1,2); | |
1969 | poles(1) = p1; | |
1970 | poles(2) = p2; | |
1971 | knots(1) = f; | |
1972 | knots(2) = l; | |
1973 | mults(1) = mults(2) = 2; | |
1974 | ||
1975 | C2d = new Geom2d_BSplineCurve(poles,knots,mults,1); | |
1976 | ||
1977 | // compute reached tolerance.begin | |
1978 | gp_Pnt PMid = C->Value((f + l) * 0.5); | |
1979 | aProjector1.Perform(PMid); | |
1980 | ||
1981 | if(aProjector1.IsDone()) { | |
1982 | aProjector1.LowerDistanceParameters(U, V); | |
1983 | gp_Pnt2d pmidproj(U, V); | |
1984 | gp_Pnt2d pmidcurve2d = C2d->Value((f + l) * 0.5); | |
1985 | Standard_Real adist = pmidcurve2d.Distance(pmidproj); | |
1986 | Tol = (adist > Tol) ? adist : Tol; | |
1987 | } | |
1988 | // compute reached tolerance.end | |
1989 | } | |
1990 | } | |
1991 | } | |
1992 | } | |
1993 | // | |
1994 | S->Bounds(umin, umax, vmin, vmax); | |
1995 | ||
1996 | if (S->IsUPeriodic() && !C2d.IsNull()) { | |
0fc4f2e2 | 1997 | // Recadre dans le domaine UV de la face |
7fd59977 | 1998 | Standard_Real period, U0, du, aEps; |
1999 | ||
2000 | du =0.0; | |
2001 | aEps=Precision::PConfusion(); | |
2002 | period = S->UPeriod(); | |
2003 | gp_Pnt2d Pf = C2d->Value(f); | |
2004 | U0=Pf.X(); | |
2005 | // | |
2006 | gp_Pnt2d Pl = C2d->Value(l); | |
2007 | ||
2008 | U0 = Min(Pl.X(), U0); | |
2009 | // while(U0-umin<aEps) { | |
2010 | while(U0-umin<-aEps) { | |
2011 | U0+=period; | |
2012 | du+=period; | |
2013 | } | |
2014 | // | |
2015 | while(U0-umax>aEps) { | |
2016 | U0-=period; | |
2017 | du-=period; | |
2018 | } | |
2019 | if (du != 0) { | |
2020 | gp_Vec2d T1(du,0.); | |
2021 | C2d->Translate(T1); | |
2022 | } | |
2023 | } | |
2024 | } | |
2025 | if (C2d.IsNull()) { | |
2026 | BOPTColStd_Dump::PrintMessage("BuildPCurves()=> Echec ProjLib\n"); | |
2027 | } | |
2028 | } | |
2029 | ||
2030 | //======================================================================= | |
2031 | //function : Parameters | |
2032 | //purpose : | |
2033 | //======================================================================= | |
2034 | void Parameters(const Handle(GeomAdaptor_HSurface)& HS1, | |
2035 | const Handle(GeomAdaptor_HSurface)& HS2, | |
2036 | const gp_Pnt& Ptref, | |
2037 | Standard_Real& U1, | |
2038 | Standard_Real& V1, | |
2039 | Standard_Real& U2, | |
2040 | Standard_Real& V2) | |
2041 | { | |
2042 | ||
2043 | IntSurf_Quadric quad1,quad2; | |
2044 | GeomAbs_SurfaceType typs = HS1->Surface().GetType(); | |
2045 | ||
2046 | switch (typs) { | |
2047 | case GeomAbs_Plane: | |
2048 | quad1.SetValue(HS1->Surface().Plane()); | |
2049 | break; | |
2050 | case GeomAbs_Cylinder: | |
2051 | quad1.SetValue(HS1->Surface().Cylinder()); | |
2052 | break; | |
2053 | case GeomAbs_Cone: | |
2054 | quad1.SetValue(HS1->Surface().Cone()); | |
2055 | break; | |
2056 | case GeomAbs_Sphere: | |
2057 | quad1.SetValue(HS1->Surface().Sphere()); | |
2058 | break; | |
2059 | default: | |
2060 | Standard_ConstructionError::Raise("GeomInt_IntSS::MakeCurve"); | |
2061 | } | |
2062 | ||
2063 | typs = HS2->Surface().GetType(); | |
2064 | switch (typs) { | |
2065 | case GeomAbs_Plane: | |
2066 | quad2.SetValue(HS2->Surface().Plane()); | |
2067 | break; | |
2068 | case GeomAbs_Cylinder: | |
2069 | quad2.SetValue(HS2->Surface().Cylinder()); | |
2070 | break; | |
2071 | case GeomAbs_Cone: | |
2072 | quad2.SetValue(HS2->Surface().Cone()); | |
2073 | break; | |
2074 | case GeomAbs_Sphere: | |
2075 | quad2.SetValue(HS2->Surface().Sphere()); | |
2076 | break; | |
2077 | default: | |
2078 | Standard_ConstructionError::Raise("GeomInt_IntSS::MakeCurve"); | |
2079 | } | |
2080 | ||
2081 | quad1.Parameters(Ptref,U1,V1); | |
2082 | quad2.Parameters(Ptref,U2,V2); | |
2083 | } | |
2084 | ||
2085 | //======================================================================= | |
2086 | //function : MakeBSpline | |
2087 | //purpose : | |
2088 | //======================================================================= | |
2089 | Handle(Geom_Curve) MakeBSpline (const Handle(IntPatch_WLine)& WL, | |
2090 | const Standard_Integer ideb, | |
2091 | const Standard_Integer ifin) | |
2092 | { | |
2093 | Standard_Integer i,nbpnt = ifin-ideb+1; | |
2094 | TColgp_Array1OfPnt poles(1,nbpnt); | |
2095 | TColStd_Array1OfReal knots(1,nbpnt); | |
2096 | TColStd_Array1OfInteger mults(1,nbpnt); | |
2097 | Standard_Integer ipidebm1; | |
2098 | for(i=1,ipidebm1=i+ideb-1; i<=nbpnt;ipidebm1++, i++) { | |
2099 | poles(i) = WL->Point(ipidebm1).Value(); | |
2100 | mults(i) = 1; | |
2101 | knots(i) = i-1; | |
2102 | } | |
2103 | mults(1) = mults(nbpnt) = 2; | |
2104 | return | |
2105 | new Geom_BSplineCurve(poles,knots,mults,1); | |
2106 | } | |
2107 | // | |
2108 | ||
2109 | //======================================================================= | |
2110 | //function : MakeBSpline2d | |
2111 | //purpose : | |
2112 | //======================================================================= | |
2113 | Handle(Geom2d_BSplineCurve) MakeBSpline2d(const Handle(IntPatch_WLine)& theWLine, | |
2114 | const Standard_Integer ideb, | |
2115 | const Standard_Integer ifin, | |
2116 | const Standard_Boolean onFirst) | |
2117 | { | |
2118 | Standard_Integer i, nbpnt = ifin-ideb+1; | |
2119 | TColgp_Array1OfPnt2d poles(1,nbpnt); | |
2120 | TColStd_Array1OfReal knots(1,nbpnt); | |
2121 | TColStd_Array1OfInteger mults(1,nbpnt); | |
2122 | Standard_Integer ipidebm1; | |
2123 | ||
2124 | for(i = 1, ipidebm1 = i+ideb-1; i <= nbpnt; ipidebm1++, i++) { | |
2125 | Standard_Real U, V; | |
2126 | if(onFirst) | |
2127 | theWLine->Point(ipidebm1).ParametersOnS1(U, V); | |
2128 | else | |
2129 | theWLine->Point(ipidebm1).ParametersOnS2(U, V); | |
2130 | poles(i).SetCoord(U, V); | |
2131 | mults(i) = 1; | |
2132 | knots(i) = i-1; | |
2133 | } | |
2134 | mults(1) = mults(nbpnt) = 2; | |
2135 | ||
2136 | return new Geom2d_BSplineCurve(poles,knots,mults,1); | |
2137 | } | |
2138 | //======================================================================= | |
2139 | //function : PrepareLines3D | |
2140 | //purpose : | |
2141 | //======================================================================= | |
2142 | void IntTools_FaceFace::PrepareLines3D() | |
2143 | { | |
2144 | Standard_Integer i, aNbCurves, j, aNbNewCurves; | |
2145 | IntTools_SequenceOfCurves aNewCvs; | |
2146 | ||
2147 | // | |
0fc4f2e2 | 2148 | // 1. Treatment of periodic and closed curves |
7fd59977 | 2149 | aNbCurves=mySeqOfCurve.Length(); |
2150 | for (i=1; i<=aNbCurves; i++) { | |
2151 | const IntTools_Curve& aIC=mySeqOfCurve(i); | |
2152 | // DEBUG | |
2153 | // const Handle(Geom_Curve)& aC3D =aIC.Curve(); | |
2154 | // const Handle(Geom2d_Curve)& aC2D1=aIC.FirstCurve2d(); | |
2155 | // const Handle(Geom2d_Curve)& aC2D2=aIC.SecondCurve2d(); | |
2156 | // | |
2157 | IntTools_SequenceOfCurves aSeqCvs; | |
2158 | aNbNewCurves=IntTools_Tools::SplitCurve(aIC, aSeqCvs); | |
2159 | ||
2160 | if (aNbNewCurves) { | |
2161 | for (j=1; j<=aNbNewCurves; j++) { | |
2162 | const IntTools_Curve& aICNew=aSeqCvs(j); | |
2163 | aNewCvs.Append(aICNew); | |
2164 | } | |
2165 | } | |
2166 | // | |
2167 | else { | |
2168 | aNewCvs.Append(aIC); | |
2169 | } | |
2170 | } | |
2171 | // | |
2172 | // 2. Plane\Cone intersection when we had 4 curves | |
2173 | GeomAbs_SurfaceType aType1, aType2; | |
2174 | BRepAdaptor_Surface aBS1, aBS2; | |
2175 | ||
2176 | aBS1.Initialize(myFace1); | |
2177 | aType1=aBS1.GetType(); | |
2178 | ||
2179 | aBS2.Initialize(myFace2); | |
2180 | aType2=aBS2.GetType(); | |
2181 | ||
2182 | if ((aType1==GeomAbs_Plane && aType2==GeomAbs_Cone) || | |
2183 | (aType2==GeomAbs_Plane && aType1==GeomAbs_Cone)) { | |
2184 | aNbCurves=aNewCvs.Length(); | |
2185 | if (aNbCurves==4) { | |
2186 | GeomAbs_CurveType aCType1=aNewCvs(1).Type(); | |
2187 | if (aCType1==GeomAbs_Line) { | |
2188 | IntTools_SequenceOfCurves aSeqIn, aSeqOut; | |
2189 | // | |
2190 | for (i=1; i<=aNbCurves; i++) { | |
2191 | const IntTools_Curve& aIC=aNewCvs(i); | |
2192 | aSeqIn.Append(aIC); | |
2193 | } | |
2194 | // | |
2195 | IntTools_Tools::RejectLines(aSeqIn, aSeqOut); | |
2196 | // | |
2197 | aNewCvs.Clear(); | |
2198 | aNbCurves=aSeqOut.Length(); | |
2199 | for (i=1; i<=aNbCurves; i++) { | |
2200 | const IntTools_Curve& aIC=aSeqOut(i); | |
2201 | aNewCvs.Append(aIC); | |
2202 | } | |
2203 | // | |
2204 | } | |
2205 | } | |
2206 | }// end of if ((aType1==GeomAbs_Plane && ... | |
2207 | // | |
2208 | // 3. Fill mySeqOfCurve | |
2209 | mySeqOfCurve.Clear(); | |
2210 | aNbCurves=aNewCvs.Length(); | |
2211 | for (i=1; i<=aNbCurves; i++) { | |
2212 | const IntTools_Curve& aIC=aNewCvs(i); | |
2213 | mySeqOfCurve.Append(aIC); | |
2214 | } | |
2215 | ||
2216 | } | |
2217 | ||
2218 | ||
2219 | //======================================================================= | |
2220 | //function : CorrectSurfaceBoundaries | |
2221 | //purpose : | |
2222 | //======================================================================= | |
2223 | void CorrectSurfaceBoundaries(const TopoDS_Face& theFace, | |
2224 | const Standard_Real theTolerance, | |
2225 | Standard_Real& theumin, | |
2226 | Standard_Real& theumax, | |
2227 | Standard_Real& thevmin, | |
2228 | Standard_Real& thevmax) | |
2229 | { | |
2230 | Standard_Boolean enlarge, isuperiodic, isvperiodic; | |
2231 | Standard_Real uinf, usup, vinf, vsup, delta; | |
2232 | GeomAbs_SurfaceType aType; | |
2233 | Handle(Geom_Surface) aSurface; | |
2234 | // | |
2235 | aSurface = BRep_Tool::Surface(theFace); | |
2236 | aSurface->Bounds(uinf, usup, vinf, vsup); | |
2237 | delta = theTolerance; | |
2238 | enlarge = Standard_False; | |
2239 | // | |
2240 | GeomAdaptor_Surface anAdaptorSurface(aSurface); | |
2241 | // | |
2242 | if(aSurface->IsKind(STANDARD_TYPE(Geom_RectangularTrimmedSurface))) { | |
2243 | Handle(Geom_Surface) aBasisSurface = | |
2244 | (Handle(Geom_RectangularTrimmedSurface)::DownCast(aSurface))->BasisSurface(); | |
2245 | ||
2246 | if(aBasisSurface->IsKind(STANDARD_TYPE(Geom_RectangularTrimmedSurface)) || | |
2247 | aBasisSurface->IsKind(STANDARD_TYPE(Geom_OffsetSurface))) { | |
2248 | return; | |
2249 | } | |
2250 | } | |
2251 | // | |
2252 | if(aSurface->IsKind(STANDARD_TYPE(Geom_OffsetSurface))) { | |
2253 | Handle(Geom_Surface) aBasisSurface = | |
2254 | (Handle(Geom_OffsetSurface)::DownCast(aSurface))->BasisSurface(); | |
2255 | ||
2256 | if(aBasisSurface->IsKind(STANDARD_TYPE(Geom_RectangularTrimmedSurface)) || | |
2257 | aBasisSurface->IsKind(STANDARD_TYPE(Geom_OffsetSurface))) { | |
2258 | return; | |
2259 | } | |
2260 | } | |
2261 | // | |
2262 | isuperiodic = anAdaptorSurface.IsUPeriodic(); | |
2263 | isvperiodic = anAdaptorSurface.IsVPeriodic(); | |
2264 | // | |
2265 | aType=anAdaptorSurface.GetType(); | |
2266 | if((aType==GeomAbs_BezierSurface) || | |
2267 | (aType==GeomAbs_BSplineSurface) || | |
2268 | (aType==GeomAbs_SurfaceOfExtrusion) || | |
2269 | (aType==GeomAbs_SurfaceOfRevolution)) { | |
2270 | enlarge=Standard_True; | |
2271 | } | |
2272 | // | |
2273 | if(!isuperiodic && enlarge) { | |
2274 | ||
2275 | if((theumin - uinf) > delta ) | |
2276 | theumin -= delta; | |
2277 | else { | |
2278 | theumin = uinf; | |
2279 | } | |
2280 | ||
2281 | if((usup - theumax) > delta ) | |
2282 | theumax += delta; | |
2283 | else | |
2284 | theumax = usup; | |
2285 | } | |
2286 | // | |
2287 | if(!isvperiodic && enlarge) { | |
2288 | if((thevmin - vinf) > delta ) { | |
2289 | thevmin -= delta; | |
2290 | } | |
2291 | else { | |
2292 | thevmin = vinf; | |
2293 | } | |
2294 | if((vsup - thevmax) > delta ) { | |
2295 | thevmax += delta; | |
2296 | } | |
2297 | else { | |
2298 | thevmax = vsup; | |
2299 | } | |
2300 | } | |
2301 | // | |
2302 | { | |
2303 | Standard_Integer aNbP; | |
2304 | Standard_Real aXP, dXfact, aXmid, aX1, aX2, aTolPA; | |
2305 | // | |
2306 | aTolPA=Precision::Angular(); | |
2307 | // U | |
2308 | if (isuperiodic) { | |
2309 | aXP=anAdaptorSurface.UPeriod(); | |
2310 | dXfact=theumax-theumin; | |
2311 | if (dXfact-aTolPA>aXP) { | |
2312 | aXmid=0.5*(theumax+theumin); | |
2313 | aNbP=RealToInt(aXmid/aXP); | |
2314 | if (aXmid<0.) { | |
2315 | aNbP=aNbP-1; | |
2316 | } | |
2317 | aX1=aNbP*aXP; | |
0fc4f2e2 P |
2318 | if (theumin>aTolPA) { |
2319 | aX1=theumin+aNbP*aXP; | |
2320 | } | |
7fd59977 | 2321 | aX2=aX1+aXP; |
2322 | if (theumin<aX1) { | |
2323 | theumin=aX1; | |
2324 | } | |
2325 | if (theumax>aX2) { | |
2326 | theumax=aX2; | |
2327 | } | |
2328 | } | |
2329 | } | |
2330 | // V | |
2331 | if (isvperiodic) { | |
2332 | aXP=anAdaptorSurface.VPeriod(); | |
2333 | dXfact=thevmax-thevmin; | |
2334 | if (dXfact-aTolPA>aXP) { | |
2335 | aXmid=0.5*(thevmax+thevmin); | |
2336 | aNbP=RealToInt(aXmid/aXP); | |
2337 | if (aXmid<0.) { | |
2338 | aNbP=aNbP-1; | |
2339 | } | |
2340 | aX1=aNbP*aXP; | |
0fc4f2e2 P |
2341 | if (thevmin>aTolPA) { |
2342 | aX1=thevmin+aNbP*aXP; | |
2343 | } | |
7fd59977 | 2344 | aX2=aX1+aXP; |
2345 | if (thevmin<aX1) { | |
2346 | thevmin=aX1; | |
2347 | } | |
2348 | if (thevmax>aX2) { | |
2349 | thevmax=aX2; | |
2350 | } | |
2351 | } | |
2352 | } | |
2353 | } | |
2354 | // | |
2355 | if(isuperiodic || isvperiodic) { | |
2356 | Standard_Boolean correct = Standard_False; | |
2357 | Standard_Boolean correctU = Standard_False; | |
2358 | Standard_Boolean correctV = Standard_False; | |
2359 | Bnd_Box2d aBox; | |
2360 | TopExp_Explorer anExp; | |
2361 | ||
2362 | for(anExp.Init(theFace, TopAbs_EDGE); anExp.More(); anExp.Next()) { | |
2363 | if(BRep_Tool::IsClosed(TopoDS::Edge(anExp.Current()), theFace)) { | |
2364 | correct = Standard_True; | |
2365 | Standard_Real f, l; | |
2366 | TopoDS_Edge anEdge = TopoDS::Edge(anExp.Current()); | |
2367 | ||
2368 | for(Standard_Integer i = 0; i < 2; i++) { | |
2369 | if(i==0) { | |
2370 | anEdge.Orientation(TopAbs_FORWARD); | |
2371 | } | |
2372 | else { | |
2373 | anEdge.Orientation(TopAbs_REVERSED); | |
2374 | } | |
2375 | Handle(Geom2d_Curve) aCurve = BRep_Tool::CurveOnSurface(anEdge, theFace, f, l); | |
2376 | ||
2377 | if(aCurve.IsNull()) { | |
2378 | correct = Standard_False; | |
2379 | break; | |
2380 | } | |
2381 | Handle(Geom2d_Line) aLine = Handle(Geom2d_Line)::DownCast(aCurve); | |
2382 | ||
2383 | if(aLine.IsNull()) { | |
2384 | correct = Standard_False; | |
2385 | break; | |
2386 | } | |
2387 | gp_Dir2d anUDir(1., 0.); | |
2388 | gp_Dir2d aVDir(0., 1.); | |
2389 | Standard_Real anAngularTolerance = Precision::Angular(); | |
2390 | ||
2391 | correctU = correctU || aLine->Position().Direction().IsParallel(aVDir, anAngularTolerance); | |
2392 | correctV = correctV || aLine->Position().Direction().IsParallel(anUDir, anAngularTolerance); | |
2393 | ||
2394 | gp_Pnt2d pp1 = aCurve->Value(f); | |
2395 | aBox.Add(pp1); | |
2396 | gp_Pnt2d pp2 = aCurve->Value(l); | |
2397 | aBox.Add(pp2); | |
2398 | } | |
2399 | if(!correct) | |
2400 | break; | |
2401 | } | |
2402 | } | |
2403 | ||
2404 | if(correct) { | |
2405 | Standard_Real umin, vmin, umax, vmax; | |
2406 | aBox.Get(umin, vmin, umax, vmax); | |
2407 | ||
2408 | if(isuperiodic && correctU) { | |
2409 | ||
2410 | if(theumin < umin) | |
2411 | theumin = umin; | |
2412 | ||
2413 | if(theumax > umax) { | |
2414 | theumax = umax; | |
2415 | } | |
2416 | } | |
2417 | if(isvperiodic && correctV) { | |
2418 | ||
2419 | if(thevmin < vmin) | |
2420 | thevmin = vmin; | |
2421 | if(thevmax > vmax) | |
2422 | thevmax = vmax; | |
2423 | } | |
2424 | } | |
2425 | } | |
2426 | } | |
2427 | // | |
2428 | // | |
2429 | // The block is dedicated to determine whether WLine [ifprm, ilprm] | |
2430 | // crosses the degenerated zone on each given surface or not. | |
2431 | // If Yes -> We will not use info about surfaces during approximation | |
2432 | // because inside degenerated zone of the surface the approx. alogo. | |
2433 | // uses wrong values of normal, etc., and resulting curve will have | |
2434 | // oscillations that we would not like to have. | |
2435 | // PKV Tue Feb 12 2002 | |
2436 | ||
2437 | ||
2438 | static | |
2439 | Standard_Boolean IsDegeneratedZone(const gp_Pnt2d& aP2d, | |
2440 | const Handle(Geom_Surface)& aS, | |
2441 | const Standard_Integer iDir); | |
2442 | static | |
2443 | Standard_Boolean IsPointInDegeneratedZone(const IntSurf_PntOn2S& aP2S, | |
2444 | const TopoDS_Face& aF1, | |
2445 | const TopoDS_Face& aF2); | |
2446 | //======================================================================= | |
2447 | //function : NotUseSurfacesForApprox | |
2448 | //purpose : | |
2449 | //======================================================================= | |
2450 | Standard_Boolean NotUseSurfacesForApprox(const TopoDS_Face& aF1, | |
2451 | const TopoDS_Face& aF2, | |
2452 | const Handle(IntPatch_WLine)& WL, | |
2453 | const Standard_Integer ifprm, | |
2454 | const Standard_Integer ilprm) | |
2455 | { | |
2456 | Standard_Boolean bPInDZ; | |
2457 | ||
2458 | Handle(IntSurf_LineOn2S) aLineOn2S=WL->Curve(); | |
2459 | ||
2460 | const IntSurf_PntOn2S& aP2Sfprm=aLineOn2S->Value(ifprm); | |
2461 | bPInDZ=IsPointInDegeneratedZone(aP2Sfprm, aF1, aF2); | |
2462 | if (bPInDZ) { | |
2463 | return bPInDZ; | |
2464 | } | |
2465 | ||
2466 | const IntSurf_PntOn2S& aP2Slprm=aLineOn2S->Value(ilprm); | |
2467 | bPInDZ=IsPointInDegeneratedZone(aP2Slprm, aF1, aF2); | |
2468 | ||
2469 | return bPInDZ; | |
2470 | } | |
2471 | //======================================================================= | |
2472 | //function : IsPointInDegeneratedZone | |
2473 | //purpose : | |
2474 | //======================================================================= | |
2475 | Standard_Boolean IsPointInDegeneratedZone(const IntSurf_PntOn2S& aP2S, | |
2476 | const TopoDS_Face& aF1, | |
2477 | const TopoDS_Face& aF2) | |
2478 | ||
2479 | { | |
2480 | Standard_Boolean bFlag=Standard_True; | |
2481 | Standard_Real US11, US12, VS11, VS12, US21, US22, VS21, VS22; | |
2482 | Standard_Real U1, V1, U2, V2, aDelta, aD; | |
2483 | gp_Pnt2d aP2d; | |
2484 | ||
2485 | Handle(Geom_Surface)aS1 = BRep_Tool::Surface(aF1); | |
2486 | aS1->Bounds(US11, US12, VS11, VS12); | |
2487 | GeomAdaptor_Surface aGAS1(aS1); | |
2488 | ||
2489 | Handle(Geom_Surface)aS2 = BRep_Tool::Surface(aF2); | |
2490 | aS1->Bounds(US21, US22, VS21, VS22); | |
2491 | GeomAdaptor_Surface aGAS2(aS2); | |
2492 | // | |
2493 | //const gp_Pnt& aP=aP2S.Value(); | |
2494 | aP2S.Parameters(U1, V1, U2, V2); | |
2495 | // | |
2496 | aDelta=1.e-7; | |
2497 | // Check on Surf 1 | |
2498 | aD=aGAS1.UResolution(aDelta); | |
2499 | aP2d.SetCoord(U1, V1); | |
2500 | if (fabs(U1-US11) < aD) { | |
2501 | bFlag=IsDegeneratedZone(aP2d, aS1, 1); | |
2502 | if (bFlag) { | |
2503 | return bFlag; | |
2504 | } | |
2505 | } | |
2506 | if (fabs(U1-US12) < aD) { | |
2507 | bFlag=IsDegeneratedZone(aP2d, aS1, 1); | |
2508 | if (bFlag) { | |
2509 | return bFlag; | |
2510 | } | |
2511 | } | |
2512 | aD=aGAS1.VResolution(aDelta); | |
2513 | if (fabs(V1-VS11) < aDelta) { | |
2514 | bFlag=IsDegeneratedZone(aP2d, aS1, 2); | |
2515 | if (bFlag) { | |
2516 | return bFlag; | |
2517 | } | |
2518 | } | |
2519 | if (fabs(V1-VS12) < aDelta) { | |
2520 | bFlag=IsDegeneratedZone(aP2d, aS1, 2); | |
2521 | if (bFlag) { | |
2522 | return bFlag; | |
2523 | } | |
2524 | } | |
2525 | // Check on Surf 2 | |
2526 | aD=aGAS2.UResolution(aDelta); | |
2527 | aP2d.SetCoord(U2, V2); | |
2528 | if (fabs(U2-US21) < aDelta) { | |
2529 | bFlag=IsDegeneratedZone(aP2d, aS2, 1); | |
2530 | if (bFlag) { | |
2531 | return bFlag; | |
2532 | } | |
2533 | } | |
2534 | if (fabs(U2-US22) < aDelta) { | |
2535 | bFlag=IsDegeneratedZone(aP2d, aS2, 1); | |
2536 | if (bFlag) { | |
2537 | return bFlag; | |
2538 | } | |
2539 | } | |
2540 | aD=aGAS2.VResolution(aDelta); | |
2541 | if (fabs(V2-VS21) < aDelta) { | |
2542 | bFlag=IsDegeneratedZone(aP2d, aS2, 2); | |
2543 | if (bFlag) { | |
2544 | return bFlag; | |
2545 | } | |
2546 | } | |
2547 | if (fabs(V2-VS22) < aDelta) { | |
2548 | bFlag=IsDegeneratedZone(aP2d, aS2, 2); | |
2549 | if (bFlag) { | |
2550 | return bFlag; | |
2551 | } | |
2552 | } | |
2553 | return !bFlag; | |
2554 | } | |
2555 | ||
2556 | //======================================================================= | |
2557 | //function : IsDegeneratedZone | |
2558 | //purpose : | |
2559 | //======================================================================= | |
2560 | Standard_Boolean IsDegeneratedZone(const gp_Pnt2d& aP2d, | |
2561 | const Handle(Geom_Surface)& aS, | |
2562 | const Standard_Integer iDir) | |
2563 | { | |
2564 | Standard_Boolean bFlag=Standard_True; | |
2565 | Standard_Real US1, US2, VS1, VS2, dY, dX, d1, d2, dD; | |
2566 | Standard_Real aXm, aYm, aXb, aYb, aXe, aYe; | |
2567 | aS->Bounds(US1, US2, VS1, VS2); | |
2568 | ||
2569 | gp_Pnt aPm, aPb, aPe; | |
2570 | ||
2571 | aXm=aP2d.X(); | |
2572 | aYm=aP2d.Y(); | |
2573 | ||
2574 | aS->D0(aXm, aYm, aPm); | |
2575 | ||
2576 | dX=1.e-5; | |
2577 | dY=1.e-5; | |
2578 | dD=1.e-12; | |
2579 | ||
2580 | if (iDir==1) { | |
2581 | aXb=aXm; | |
2582 | aXe=aXm; | |
2583 | aYb=aYm-dY; | |
2584 | if (aYb < VS1) { | |
2585 | aYb=VS1; | |
2586 | } | |
2587 | aYe=aYm+dY; | |
2588 | if (aYe > VS2) { | |
2589 | aYe=VS2; | |
2590 | } | |
2591 | aS->D0(aXb, aYb, aPb); | |
2592 | aS->D0(aXe, aYe, aPe); | |
2593 | ||
2594 | d1=aPm.Distance(aPb); | |
2595 | d2=aPm.Distance(aPe); | |
2596 | if (d1 < dD && d2 < dD) { | |
2597 | return bFlag; | |
2598 | } | |
2599 | return !bFlag; | |
2600 | } | |
2601 | // | |
2602 | else if (iDir==2) { | |
2603 | aYb=aYm; | |
2604 | aYe=aYm; | |
2605 | aXb=aXm-dX; | |
2606 | if (aXb < US1) { | |
2607 | aXb=US1; | |
2608 | } | |
2609 | aXe=aXm+dX; | |
2610 | if (aXe > US2) { | |
2611 | aXe=US2; | |
2612 | } | |
2613 | aS->D0(aXb, aYb, aPb); | |
2614 | aS->D0(aXe, aYe, aPe); | |
2615 | ||
2616 | d1=aPm.Distance(aPb); | |
2617 | d2=aPm.Distance(aPe); | |
2618 | if (d1 < dD && d2 < dD) { | |
2619 | return bFlag; | |
2620 | } | |
2621 | return !bFlag; | |
2622 | } | |
2623 | return !bFlag; | |
2624 | } | |
2625 | ||
2626 | //========================================================================= | |
2627 | // static function : ComputePurgedWLine | |
2628 | // purpose : Removes equal points (leave one of equal points) from theWLine | |
2629 | // and recompute vertex parameters. | |
2630 | // Returns new WLine or null WLine if the number | |
2631 | // of the points is less than 2. | |
2632 | //========================================================================= | |
2633 | Handle(IntPatch_WLine) ComputePurgedWLine(const Handle(IntPatch_WLine)& theWLine) { | |
2634 | Handle(IntPatch_WLine) aResult; | |
2635 | Handle(IntPatch_WLine) aLocalWLine; | |
2636 | Handle(IntPatch_WLine) aTmpWLine = theWLine; | |
2637 | ||
2638 | Handle(IntSurf_LineOn2S) aLineOn2S = new IntSurf_LineOn2S(); | |
2639 | aLocalWLine = new IntPatch_WLine(aLineOn2S, Standard_False); | |
2640 | Standard_Integer i, k, v, nb, nbvtx; | |
2641 | nbvtx = theWLine->NbVertex(); | |
2642 | nb = theWLine->NbPnts(); | |
2643 | ||
2644 | for(i = 1; i <= nb; i++) { | |
2645 | aLineOn2S->Add(theWLine->Point(i)); | |
2646 | } | |
2647 | ||
2648 | for(v = 1; v <= nbvtx; v++) { | |
2649 | aLocalWLine->AddVertex(theWLine->Vertex(v)); | |
2650 | } | |
2651 | ||
2652 | for(i = 1; i <= aLineOn2S->NbPoints(); i++) { | |
2653 | Standard_Integer aStartIndex = i + 1; | |
2654 | Standard_Integer anEndIndex = i + 5; | |
2655 | nb = aLineOn2S->NbPoints(); | |
2656 | anEndIndex = (anEndIndex > nb) ? nb : anEndIndex; | |
2657 | ||
2658 | if((aStartIndex >= nb) || (anEndIndex <= 1)) { | |
2659 | continue; | |
2660 | } | |
2661 | k = aStartIndex; | |
2662 | ||
2663 | while(k <= anEndIndex) { | |
2664 | ||
2665 | if(i != k) { | |
2666 | IntSurf_PntOn2S p1 = aLineOn2S->Value(i); | |
2667 | IntSurf_PntOn2S p2 = aLineOn2S->Value(k); | |
2668 | ||
2669 | if(p1.Value().IsEqual(p2.Value(), gp::Resolution())) { | |
2670 | aTmpWLine = aLocalWLine; | |
2671 | aLocalWLine = new IntPatch_WLine(aLineOn2S, Standard_False); | |
2672 | ||
2673 | for(v = 1; v <= aTmpWLine->NbVertex(); v++) { | |
2674 | IntPatch_Point aVertex = aTmpWLine->Vertex(v); | |
2675 | Standard_Integer avertexindex = (Standard_Integer)aVertex.ParameterOnLine(); | |
2676 | ||
2677 | if(avertexindex >= k) { | |
2678 | aVertex.SetParameter(aVertex.ParameterOnLine() - 1.); | |
2679 | } | |
2680 | aLocalWLine->AddVertex(aVertex); | |
2681 | } | |
2682 | aLineOn2S->RemovePoint(k); | |
2683 | anEndIndex--; | |
2684 | continue; | |
2685 | } | |
2686 | } | |
2687 | k++; | |
2688 | } | |
2689 | } | |
2690 | ||
2691 | if(aLineOn2S->NbPoints() > 1) { | |
2692 | aResult = aLocalWLine; | |
2693 | } | |
2694 | return aResult; | |
2695 | } | |
2696 | ||
2697 | //======================================================================= | |
2698 | //function : TolR3d | |
2699 | //purpose : | |
2700 | //======================================================================= | |
2701 | void TolR3d(const TopoDS_Face& aF1, | |
2702 | const TopoDS_Face& aF2, | |
2703 | Standard_Real& myTolReached3d) | |
2704 | { | |
2705 | Standard_Real aTolF1, aTolF2, aTolFMax, aTolTresh; | |
2706 | ||
2707 | aTolTresh=2.999999e-3; | |
2708 | aTolF1 = BRep_Tool::Tolerance(aF1); | |
2709 | aTolF2 = BRep_Tool::Tolerance(aF2); | |
2710 | aTolFMax=Max(aTolF1, aTolF2); | |
2711 | ||
2712 | if (aTolFMax>aTolTresh) { | |
2713 | myTolReached3d=aTolFMax; | |
2714 | } | |
2715 | } | |
2716 | //======================================================================= | |
2717 | //function : AdjustPeriodic | |
2718 | //purpose : | |
2719 | //======================================================================= | |
2720 | Standard_Real AdjustPeriodic(const Standard_Real theParameter, | |
2721 | const Standard_Real parmin, | |
2722 | const Standard_Real parmax, | |
2723 | const Standard_Real thePeriod, | |
2724 | Standard_Real& theOffset) | |
2725 | { | |
2726 | Standard_Real aresult; | |
2727 | // | |
2728 | theOffset = 0.; | |
2729 | aresult = theParameter; | |
2730 | while(aresult < parmin) { | |
2731 | aresult += thePeriod; | |
2732 | theOffset += thePeriod; | |
2733 | } | |
2734 | ||
2735 | while(aresult > parmax) { | |
2736 | aresult -= thePeriod; | |
2737 | theOffset -= thePeriod; | |
2738 | } | |
2739 | return aresult; | |
2740 | } | |
2741 | //======================================================================= | |
2742 | //function : IsPointOnBoundary | |
2743 | //purpose : | |
2744 | //======================================================================= | |
2745 | Standard_Boolean IsPointOnBoundary(const Standard_Real theParameter, | |
2746 | const Standard_Real theFirstBoundary, | |
2747 | const Standard_Real theSecondBoundary, | |
2748 | const Standard_Real theResolution, | |
2749 | Standard_Boolean& IsOnFirstBoundary) | |
2750 | { | |
2751 | Standard_Boolean bRet; | |
2752 | Standard_Integer i; | |
2753 | Standard_Real adist; | |
2754 | // | |
2755 | bRet=Standard_False; | |
2756 | for(i = 0; i < 2; ++i) { | |
2757 | IsOnFirstBoundary = (i == 0); | |
2758 | if (IsOnFirstBoundary) { | |
2759 | adist = fabs(theParameter - theFirstBoundary); | |
2760 | } | |
2761 | else { | |
2762 | adist = fabs(theParameter - theSecondBoundary); | |
2763 | } | |
2764 | if(adist < theResolution) { | |
2765 | return !bRet; | |
2766 | } | |
2767 | } | |
2768 | return bRet; | |
2769 | } | |
2770 | // ------------------------------------------------------------------------------------------------ | |
2771 | // static function: FindPoint | |
2772 | // purpose: | |
2773 | // ------------------------------------------------------------------------------------------------ | |
2774 | Standard_Boolean FindPoint(const gp_Pnt2d& theFirstPoint, | |
2775 | const gp_Pnt2d& theLastPoint, | |
2776 | const Standard_Real theUmin, | |
2777 | const Standard_Real theUmax, | |
2778 | const Standard_Real theVmin, | |
2779 | const Standard_Real theVmax, | |
2780 | gp_Pnt2d& theNewPoint) { | |
2781 | ||
2782 | gp_Vec2d aVec(theFirstPoint, theLastPoint); | |
2783 | Standard_Integer i = 0, j = 0; | |
2784 | ||
2785 | for(i = 0; i < 4; i++) { | |
2786 | gp_Vec2d anOtherVec; | |
2787 | gp_Vec2d anOtherVecNormal; | |
2788 | gp_Pnt2d aprojpoint = theLastPoint; | |
2789 | ||
2790 | if((i % 2) == 0) { | |
2791 | anOtherVec.SetX(0.); | |
2792 | anOtherVec.SetY(1.); | |
2793 | anOtherVecNormal.SetX(1.); | |
2794 | anOtherVecNormal.SetY(0.); | |
2795 | ||
2796 | if(i < 2) | |
2797 | aprojpoint.SetX(theUmin); | |
2798 | else | |
2799 | aprojpoint.SetX(theUmax); | |
2800 | } | |
2801 | else { | |
2802 | anOtherVec.SetX(1.); | |
2803 | anOtherVec.SetY(0.); | |
2804 | anOtherVecNormal.SetX(0.); | |
2805 | anOtherVecNormal.SetY(1.); | |
2806 | ||
2807 | if(i < 2) | |
2808 | aprojpoint.SetY(theVmin); | |
2809 | else | |
2810 | aprojpoint.SetY(theVmax); | |
2811 | } | |
2812 | gp_Vec2d anormvec = aVec; | |
2813 | anormvec.Normalize(); | |
2814 | Standard_Real adot1 = anormvec.Dot(anOtherVecNormal); | |
2815 | ||
2816 | if(fabs(adot1) < Precision::Angular()) | |
2817 | continue; | |
2818 | Standard_Real adist = 0.; | |
2819 | Standard_Boolean bIsOut = Standard_False; | |
2820 | ||
2821 | if((i % 2) == 0) { | |
2822 | adist = (i < 2) ? fabs(theLastPoint.X() - theUmin) : fabs(theLastPoint.X() - theUmax); | |
2823 | bIsOut = (i < 2) ? (theLastPoint.X() < theUmin) : (theLastPoint.X() > theUmax); | |
2824 | } | |
2825 | else { | |
2826 | adist = (i < 2) ? fabs(theLastPoint.Y() - theVmin) : fabs(theLastPoint.Y() - theVmax); | |
2827 | bIsOut = (i < 2) ? (theLastPoint.Y() < theVmin) : (theLastPoint.Y() > theVmax); | |
2828 | } | |
2829 | Standard_Real anoffset = adist * anOtherVec.Dot(anormvec) / adot1; | |
2830 | ||
2831 | for(j = 0; j < 2; j++) { | |
2832 | anoffset = (j == 0) ? anoffset : -anoffset; | |
2833 | gp_Pnt2d acurpoint(aprojpoint.XY() + (anOtherVec.XY()*anoffset)); | |
2834 | gp_Vec2d acurvec(theLastPoint, acurpoint); | |
2835 | if ( bIsOut ) | |
2836 | acurvec.Reverse(); | |
2837 | ||
9e9df9d9 P |
2838 | Standard_Real aDotX, anAngleX; |
2839 | // | |
2840 | aDotX = aVec.Dot(acurvec); | |
2841 | anAngleX = aVec.Angle(acurvec); | |
2842 | // | |
2843 | if(aDotX > 0. && fabs(anAngleX) < Precision::PConfusion()) { | |
7fd59977 | 2844 | if((i % 2) == 0) { |
2845 | if((acurpoint.Y() >= theVmin) && | |
2846 | (acurpoint.Y() <= theVmax)) { | |
2847 | theNewPoint = acurpoint; | |
2848 | return Standard_True; | |
2849 | } | |
2850 | } | |
2851 | else { | |
2852 | if((acurpoint.X() >= theUmin) && | |
2853 | (acurpoint.X() <= theUmax)) { | |
2854 | theNewPoint = acurpoint; | |
2855 | return Standard_True; | |
2856 | } | |
2857 | } | |
2858 | } | |
2859 | } | |
2860 | } | |
2861 | return Standard_False; | |
2862 | } | |
2863 | ||
2864 | ||
2865 | // ------------------------------------------------------------------------------------------------ | |
2866 | // static function: FindPoint | |
2867 | // purpose: Find point on the boundary of radial tangent zone | |
2868 | // ------------------------------------------------------------------------------------------------ | |
2869 | Standard_Boolean FindPoint(const gp_Pnt2d& theFirstPoint, | |
2870 | const gp_Pnt2d& theLastPoint, | |
2871 | const Standard_Real theUmin, | |
2872 | const Standard_Real theUmax, | |
2873 | const Standard_Real theVmin, | |
2874 | const Standard_Real theVmax, | |
2875 | const gp_Pnt2d& theTanZoneCenter, | |
2876 | const Standard_Real theZoneRadius, | |
2877 | Handle(GeomAdaptor_HSurface) theGASurface, | |
2878 | gp_Pnt2d& theNewPoint) { | |
2879 | theNewPoint = theLastPoint; | |
2880 | ||
2881 | if ( !IsInsideTanZone( theLastPoint, theTanZoneCenter, theZoneRadius, theGASurface) ) | |
2882 | return Standard_False; | |
2883 | ||
2884 | Standard_Real aUResolution = theGASurface->UResolution( theZoneRadius ); | |
2885 | Standard_Real aVResolution = theGASurface->VResolution( theZoneRadius ); | |
2886 | ||
2887 | Standard_Real aRadius = ( aUResolution < aVResolution ) ? aUResolution : aVResolution; | |
2888 | gp_Ax22d anAxis( theTanZoneCenter, gp_Dir2d(1, 0), gp_Dir2d(0, 1) ); | |
2889 | gp_Circ2d aCircle( anAxis, aRadius ); | |
2890 | ||
2891 | // | |
2892 | gp_Vec2d aDir( theLastPoint.XY() - theFirstPoint.XY() ); | |
2893 | Standard_Real aLength = aDir.Magnitude(); | |
2894 | if ( aLength <= gp::Resolution() ) | |
2895 | return Standard_False; | |
2896 | gp_Lin2d aLine( theFirstPoint, aDir ); | |
2897 | ||
2898 | // | |
2899 | Handle(Geom2d_Line) aCLine = new Geom2d_Line( aLine ); | |
2900 | Handle(Geom2d_TrimmedCurve) aC1 = new Geom2d_TrimmedCurve( aCLine, 0, aLength ); | |
2901 | Handle(Geom2d_Circle) aC2 = new Geom2d_Circle( aCircle ); | |
2902 | ||
2903 | Standard_Real aTol = aRadius * 0.001; | |
2904 | aTol = ( aTol < Precision::PConfusion() ) ? Precision::PConfusion() : aTol; | |
2905 | ||
2906 | Geom2dAPI_InterCurveCurve anIntersector; | |
2907 | anIntersector.Init( aC1, aC2, aTol ); | |
2908 | ||
2909 | if ( anIntersector.NbPoints() == 0 ) | |
2910 | return Standard_False; | |
2911 | ||
2912 | Standard_Boolean aFound = Standard_False; | |
2913 | Standard_Real aMinDist = aLength * aLength; | |
2914 | Standard_Integer i = 0; | |
2915 | for ( i = 1; i <= anIntersector.NbPoints(); i++ ) { | |
2916 | gp_Pnt2d aPInt = anIntersector.Point( i ); | |
2917 | if ( aPInt.SquareDistance( theFirstPoint ) < aMinDist ) { | |
2918 | if ( ( aPInt.X() >= theUmin ) && ( aPInt.X() <= theUmax ) && | |
2919 | ( aPInt.Y() >= theVmin ) && ( aPInt.Y() <= theVmax ) ) { | |
2920 | theNewPoint = aPInt; | |
2921 | aFound = Standard_True; | |
2922 | } | |
2923 | } | |
2924 | } | |
2925 | ||
2926 | return aFound; | |
2927 | } | |
2928 | ||
2929 | // ------------------------------------------------------------------------------------------------ | |
2930 | // static function: IsInsideTanZone | |
2931 | // purpose: Check if point is inside a radial tangent zone | |
2932 | // ------------------------------------------------------------------------------------------------ | |
2933 | Standard_Boolean IsInsideTanZone(const gp_Pnt2d& thePoint, | |
2934 | const gp_Pnt2d& theTanZoneCenter, | |
2935 | const Standard_Real theZoneRadius, | |
2936 | Handle(GeomAdaptor_HSurface) theGASurface) { | |
2937 | ||
2938 | Standard_Real aUResolution = theGASurface->UResolution( theZoneRadius ); | |
2939 | Standard_Real aVResolution = theGASurface->VResolution( theZoneRadius ); | |
2940 | Standard_Real aRadiusSQR = ( aUResolution < aVResolution ) ? aUResolution : aVResolution; | |
2941 | aRadiusSQR *= aRadiusSQR; | |
2942 | if ( thePoint.SquareDistance( theTanZoneCenter ) <= aRadiusSQR ) | |
2943 | return Standard_True; | |
2944 | return Standard_False; | |
2945 | } | |
2946 | ||
2947 | // ------------------------------------------------------------------------------------------------ | |
2948 | // static function: CheckTangentZonesExist | |
2949 | // purpose: Check if tangent zone exists | |
2950 | // ------------------------------------------------------------------------------------------------ | |
2951 | Standard_Boolean CheckTangentZonesExist( const Handle(GeomAdaptor_HSurface)& theSurface1, | |
2952 | const Handle(GeomAdaptor_HSurface)& theSurface2 ) | |
2953 | { | |
2954 | if ( ( theSurface1->GetType() != GeomAbs_Torus ) || | |
2955 | ( theSurface2->GetType() != GeomAbs_Torus ) ) | |
2956 | return Standard_False; | |
2957 | ||
2958 | IntTools_Context aContext; | |
2959 | ||
2960 | gp_Torus aTor1 = theSurface1->Torus(); | |
2961 | gp_Torus aTor2 = theSurface2->Torus(); | |
2962 | ||
2963 | if ( aTor1.Location().Distance( aTor2.Location() ) > Precision::Confusion() ) | |
2964 | return Standard_False; | |
2965 | ||
2966 | if ( ( fabs( aTor1.MajorRadius() - aTor2.MajorRadius() ) > Precision::Confusion() ) || | |
2967 | ( fabs( aTor1.MinorRadius() - aTor2.MinorRadius() ) > Precision::Confusion() ) ) | |
2968 | return Standard_False; | |
2969 | ||
2970 | if ( ( aTor1.MajorRadius() < aTor1.MinorRadius() ) || | |
2971 | ( aTor2.MajorRadius() < aTor2.MinorRadius() ) ) | |
2972 | return Standard_False; | |
2973 | return Standard_True; | |
2974 | } | |
2975 | ||
2976 | // ------------------------------------------------------------------------------------------------ | |
2977 | // static function: ComputeTangentZones | |
2978 | // purpose: | |
2979 | // ------------------------------------------------------------------------------------------------ | |
2980 | Standard_Integer ComputeTangentZones( const Handle(GeomAdaptor_HSurface)& theSurface1, | |
2981 | const Handle(GeomAdaptor_HSurface)& theSurface2, | |
2982 | const TopoDS_Face& theFace1, | |
2983 | const TopoDS_Face& theFace2, | |
2984 | Handle(TColgp_HArray1OfPnt2d)& theResultOnS1, | |
2985 | Handle(TColgp_HArray1OfPnt2d)& theResultOnS2, | |
2986 | Handle(TColStd_HArray1OfReal)& theResultRadius) { | |
2987 | Standard_Integer aResult = 0; | |
2988 | if ( !CheckTangentZonesExist( theSurface1, theSurface2 ) ) | |
2989 | return aResult; | |
2990 | ||
2991 | IntTools_Context aContext; | |
2992 | ||
2993 | TColgp_SequenceOfPnt2d aSeqResultS1, aSeqResultS2; | |
2994 | TColStd_SequenceOfReal aSeqResultRad; | |
2995 | ||
2996 | gp_Torus aTor1 = theSurface1->Torus(); | |
2997 | gp_Torus aTor2 = theSurface2->Torus(); | |
2998 | ||
2999 | gp_Ax2 anax1( aTor1.Location(), aTor1.Axis().Direction() ); | |
3000 | gp_Ax2 anax2( aTor2.Location(), aTor2.Axis().Direction() ); | |
3001 | Standard_Integer j = 0; | |
3002 | ||
3003 | for ( j = 0; j < 2; j++ ) { | |
3004 | Standard_Real aCoef = ( j == 0 ) ? -1 : 1; | |
3005 | Standard_Real aRadius1 = fabs(aTor1.MajorRadius() + aCoef * aTor1.MinorRadius()); | |
3006 | Standard_Real aRadius2 = fabs(aTor2.MajorRadius() + aCoef * aTor2.MinorRadius()); | |
3007 | ||
3008 | gp_Circ aCircle1( anax1, aRadius1 ); | |
3009 | gp_Circ aCircle2( anax2, aRadius2 ); | |
3010 | ||
3011 | // roughly compute radius of tangent zone for perpendicular case | |
3012 | Standard_Real aCriteria = Precision::Confusion() * 0.5; | |
3013 | ||
3014 | Standard_Real aT1 = aCriteria; | |
3015 | Standard_Real aT2 = aCriteria; | |
3016 | if ( j == 0 ) { | |
3017 | // internal tangency | |
3018 | Standard_Real aR = ( aRadius1 > aTor2.MinorRadius() ) ? aRadius1 : aTor2.MinorRadius(); | |
3019 | //aT1 = aCriteria * aCriteria + aR * aR - ( aR - aCriteria ) * ( aR - aCriteria ); | |
3020 | aT1 = 2. * aR * aCriteria; | |
3021 | aT2 = aT1; | |
3022 | } | |
3023 | else { | |
3024 | // external tangency | |
3025 | Standard_Real aRb = ( aRadius1 > aTor2.MinorRadius() ) ? aRadius1 : aTor2.MinorRadius(); | |
3026 | Standard_Real aRm = ( aRadius1 < aTor2.MinorRadius() ) ? aRadius1 : aTor2.MinorRadius(); | |
3027 | Standard_Real aDelta = aRb - aCriteria; | |
3028 | aDelta *= aDelta; | |
3029 | aDelta -= aRm * aRm; | |
3030 | aDelta /= 2. * (aRb - aRm); | |
3031 | aDelta -= 0.5 * (aRb - aRm); | |
3032 | ||
3033 | aT1 = 2. * aRm * (aRm - aDelta); | |
3034 | aT2 = aT1; | |
3035 | } | |
3036 | aCriteria = ( aT1 > aT2) ? aT1 : aT2; | |
3037 | if ( aCriteria > 0 ) | |
3038 | aCriteria = sqrt( aCriteria ); | |
3039 | ||
3040 | if ( aCriteria > 0.5 * aTor1.MinorRadius() ) { | |
3041 | // too big zone -> drop to minimum | |
3042 | aCriteria = Precision::Confusion(); | |
3043 | } | |
3044 | ||
3045 | GeomAdaptor_Curve aC1( new Geom_Circle(aCircle1) ); | |
3046 | GeomAdaptor_Curve aC2( new Geom_Circle(aCircle2) ); | |
3047 | Extrema_ExtCC anExtrema(aC1, aC2, 0, 2.*Standard_PI, 0, 2.*Standard_PI, | |
3048 | Precision::PConfusion(), Precision::PConfusion()); | |
3049 | ||
3050 | if ( anExtrema.IsDone() ) { | |
3051 | ||
3052 | Standard_Integer i = 0; | |
3053 | for ( i = 1; i <= anExtrema.NbExt(); i++ ) { | |
3054 | if ( anExtrema.SquareDistance(i) > aCriteria * aCriteria ) | |
3055 | continue; | |
3056 | ||
3057 | Extrema_POnCurv P1, P2; | |
3058 | anExtrema.Points( i, P1, P2 ); | |
3059 | ||
3060 | Standard_Boolean bFoundResult = Standard_True; | |
3061 | gp_Pnt2d pr1, pr2; | |
3062 | ||
3063 | Standard_Integer surfit = 0; | |
3064 | for ( surfit = 0; surfit < 2; surfit++ ) { | |
3065 | GeomAPI_ProjectPointOnSurf& aProjector = (surfit == 0) ? aContext.ProjPS(theFace1) : aContext.ProjPS(theFace2); | |
3066 | ||
3067 | gp_Pnt aP3d = (surfit == 0) ? P1.Value() : P2.Value(); | |
3068 | aProjector.Perform(aP3d); | |
3069 | ||
3070 | if(!aProjector.IsDone()) | |
3071 | bFoundResult = Standard_False; | |
3072 | else { | |
3073 | if(aProjector.LowerDistance() > aCriteria) { | |
3074 | bFoundResult = Standard_False; | |
3075 | } | |
3076 | else { | |
3077 | Standard_Real foundU = 0, foundV = 0; | |
3078 | aProjector.LowerDistanceParameters(foundU, foundV); | |
3079 | if ( surfit == 0 ) | |
3080 | pr1 = gp_Pnt2d( foundU, foundV ); | |
3081 | else | |
3082 | pr2 = gp_Pnt2d( foundU, foundV ); | |
3083 | } | |
3084 | } | |
3085 | } | |
3086 | if ( bFoundResult ) { | |
3087 | aSeqResultS1.Append( pr1 ); | |
3088 | aSeqResultS2.Append( pr2 ); | |
3089 | aSeqResultRad.Append( aCriteria ); | |
3090 | ||
3091 | // torus is u and v periodic | |
3092 | const Standard_Real twoPI = Standard_PI + Standard_PI; | |
3093 | Standard_Real arr1tmp[2] = {pr1.X(), pr1.Y()}; | |
3094 | Standard_Real arr2tmp[2] = {pr2.X(), pr2.Y()}; | |
3095 | ||
3096 | // iteration on period bounds | |
3097 | for ( Standard_Integer k1 = 0; k1 < 2; k1++ ) { | |
3098 | Standard_Real aBound = ( k1 == 0 ) ? 0 : twoPI; | |
3099 | Standard_Real aShift = ( k1 == 0 ) ? twoPI : -twoPI; | |
3100 | ||
3101 | // iteration on surfaces | |
3102 | for ( Standard_Integer k2 = 0; k2 < 2; k2++ ) { | |
3103 | Standard_Real* arr1 = ( k2 == 0 ) ? arr1tmp : arr2tmp; | |
3104 | Standard_Real* arr2 = ( k2 != 0 ) ? arr1tmp : arr2tmp; | |
3105 | TColgp_SequenceOfPnt2d& aSeqS1 = ( k2 == 0 ) ? aSeqResultS1 : aSeqResultS2; | |
3106 | TColgp_SequenceOfPnt2d& aSeqS2 = ( k2 != 0 ) ? aSeqResultS1 : aSeqResultS2; | |
3107 | ||
3108 | if (fabs(arr1[0] - aBound) < Precision::PConfusion()) { | |
3109 | aSeqS1.Append( gp_Pnt2d( arr1[0] + aShift, arr1[1] ) ); | |
3110 | aSeqS2.Append( gp_Pnt2d( arr2[0], arr2[1] ) ); | |
3111 | aSeqResultRad.Append( aCriteria ); | |
3112 | } | |
3113 | if (fabs(arr1[1] - aBound) < Precision::PConfusion()) { | |
3114 | aSeqS1.Append( gp_Pnt2d( arr1[0], arr1[1] + aShift) ); | |
3115 | aSeqS2.Append( gp_Pnt2d( arr2[0], arr2[1] ) ); | |
3116 | aSeqResultRad.Append( aCriteria ); | |
3117 | } | |
3118 | } | |
3119 | } // | |
3120 | } | |
3121 | } | |
3122 | } | |
3123 | } | |
3124 | aResult = aSeqResultRad.Length(); | |
3125 | ||
3126 | if ( aResult > 0 ) { | |
3127 | theResultOnS1 = new TColgp_HArray1OfPnt2d( 1, aResult ); | |
3128 | theResultOnS2 = new TColgp_HArray1OfPnt2d( 1, aResult ); | |
3129 | theResultRadius = new TColStd_HArray1OfReal( 1, aResult ); | |
3130 | ||
3131 | for ( Standard_Integer i = 1 ; i <= aResult; i++ ) { | |
3132 | theResultOnS1->SetValue( i, aSeqResultS1.Value(i) ); | |
3133 | theResultOnS2->SetValue( i, aSeqResultS2.Value(i) ); | |
3134 | theResultRadius->SetValue( i, aSeqResultRad.Value(i) ); | |
3135 | } | |
3136 | } | |
3137 | return aResult; | |
3138 | } | |
3139 | ||
3140 | // ------------------------------------------------------------------------------------------------ | |
3141 | // static function: AdjustByNeighbour | |
3142 | // purpose: | |
3143 | // ------------------------------------------------------------------------------------------------ | |
3144 | gp_Pnt2d AdjustByNeighbour(const gp_Pnt2d& theaNeighbourPoint, | |
3145 | const gp_Pnt2d& theOriginalPoint, | |
3146 | Handle(GeomAdaptor_HSurface) theGASurface) { | |
3147 | ||
3148 | gp_Pnt2d ap1 = theaNeighbourPoint; | |
3149 | gp_Pnt2d ap2 = theOriginalPoint; | |
3150 | ||
3151 | if ( theGASurface->IsUPeriodic() ) { | |
3152 | Standard_Real aPeriod = theGASurface->UPeriod(); | |
3153 | gp_Pnt2d aPTest = ap2; | |
3154 | Standard_Real aSqDistMin = 1.e+100; | |
3155 | ||
3156 | for ( Standard_Integer pIt = -1; pIt <= 1; pIt++) { | |
3157 | aPTest.SetX( theOriginalPoint.X() + aPeriod * pIt ); | |
3158 | Standard_Real dd = ap1.SquareDistance( aPTest ); | |
3159 | ||
3160 | if ( dd < aSqDistMin ) { | |
3161 | ap2 = aPTest; | |
3162 | aSqDistMin = dd; | |
3163 | } | |
3164 | } | |
3165 | } | |
3166 | if ( theGASurface->IsVPeriodic() ) { | |
3167 | Standard_Real aPeriod = theGASurface->VPeriod(); | |
3168 | gp_Pnt2d aPTest = ap2; | |
3169 | Standard_Real aSqDistMin = 1.e+100; | |
3170 | ||
3171 | for ( Standard_Integer pIt = -1; pIt <= 1; pIt++) { | |
3172 | aPTest.SetY( theOriginalPoint.Y() + aPeriod * pIt ); | |
3173 | Standard_Real dd = ap1.SquareDistance( aPTest ); | |
3174 | ||
3175 | if ( dd < aSqDistMin ) { | |
3176 | ap2 = aPTest; | |
3177 | aSqDistMin = dd; | |
3178 | } | |
3179 | } | |
3180 | } | |
3181 | return ap2; | |
3182 | } | |
3183 | ||
3184 | // ------------------------------------------------------------------------------------------------ | |
3185 | //function: DecompositionOfWLine | |
3186 | // purpose: | |
3187 | // ------------------------------------------------------------------------------------------------ | |
3188 | Standard_Boolean DecompositionOfWLine(const Handle(IntPatch_WLine)& theWLine, | |
3189 | const Handle(GeomAdaptor_HSurface)& theSurface1, | |
3190 | const Handle(GeomAdaptor_HSurface)& theSurface2, | |
3191 | const TopoDS_Face& theFace1, | |
3192 | const TopoDS_Face& theFace2, | |
3193 | const IntTools_LineConstructor& theLConstructor, | |
3194 | const Standard_Boolean theAvoidLConstructor, | |
3195 | IntPatch_SequenceOfLine& theNewLines, | |
3196 | Standard_Real& theReachedTol3d) { | |
3197 | ||
3198 | Standard_Boolean bRet, bAvoidLineConstructor; | |
3199 | Standard_Integer aNbPnts, aNbParts; | |
3200 | // | |
3201 | bRet=Standard_False; | |
3202 | aNbPnts=theWLine->NbPnts(); | |
3203 | bAvoidLineConstructor=theAvoidLConstructor; | |
3204 | // | |
3205 | if(!aNbPnts){ | |
3206 | return bRet; | |
3207 | } | |
3208 | if (!bAvoidLineConstructor) { | |
3209 | aNbParts=theLConstructor.NbParts(); | |
3210 | if (!aNbParts) { | |
3211 | return bRet; | |
3212 | } | |
3213 | } | |
3214 | // | |
3215 | Standard_Boolean bIsPrevPointOnBoundary, bIsPointOnBoundary, bIsCurrentPointOnBoundary; | |
3216 | Standard_Integer nblines, pit, i, j; | |
3217 | Standard_Real aTol; | |
3218 | TColStd_Array1OfListOfInteger anArrayOfLines(1, aNbPnts); | |
3219 | TColStd_Array1OfInteger anArrayOfLineType(1, aNbPnts); | |
3220 | TColStd_ListOfInteger aListOfPointIndex; | |
3221 | IntTools_Context aContext; | |
3222 | ||
3223 | Handle(TColgp_HArray1OfPnt2d) aTanZoneS1; | |
3224 | Handle(TColgp_HArray1OfPnt2d) aTanZoneS2; | |
3225 | Handle(TColStd_HArray1OfReal) aTanZoneRadius; | |
3226 | Standard_Integer aNbZone = ComputeTangentZones( theSurface1, theSurface2, theFace1, theFace2, | |
3227 | aTanZoneS1, aTanZoneS2, aTanZoneRadius ); | |
3228 | ||
3229 | // | |
3230 | nblines=0; | |
3231 | aTol=Precision::Confusion(); | |
3232 | aTol=0.5*aTol; | |
3233 | bIsPrevPointOnBoundary=Standard_False; | |
3234 | bIsPointOnBoundary=Standard_False; | |
3235 | // | |
3236 | // 1. ... | |
3237 | // | |
3238 | // Points | |
3239 | for(pit = 1; pit <= aNbPnts; ++pit) { | |
3240 | Standard_Boolean bIsOnFirstBoundary, isperiodic; | |
3241 | Standard_Real aResolution, aPeriod, alowerboundary, aupperboundary, U, V; | |
3242 | Standard_Real aParameter, anoffset, anAdjustPar; | |
3243 | Standard_Real umin, umax, vmin, vmax; | |
3244 | // | |
3245 | bIsCurrentPointOnBoundary = Standard_False; | |
3246 | const IntSurf_PntOn2S& aPoint = theWLine->Point(pit); | |
3247 | // | |
3248 | // Surface | |
3249 | for(i = 0; i < 2; ++i) { | |
3250 | Handle(GeomAdaptor_HSurface) aGASurface = (!i) ? theSurface1 : theSurface2; | |
3251 | aGASurface->ChangeSurface().Surface()->Bounds(umin, umax, vmin, vmax); | |
3252 | if(!i) { | |
3253 | aPoint.ParametersOnS1(U, V); | |
3254 | } | |
3255 | else { | |
3256 | aPoint.ParametersOnS2(U, V); | |
3257 | } | |
3258 | // U, V | |
3259 | for(j = 0; j < 2; j++) { | |
3260 | isperiodic = (!j) ? aGASurface->IsUPeriodic() : aGASurface->IsVPeriodic(); | |
3261 | if(!isperiodic){ | |
3262 | continue; | |
3263 | } | |
3264 | // | |
3265 | if (!j) { | |
3266 | aResolution=aGASurface->UResolution(aTol); | |
3267 | aPeriod=aGASurface->UPeriod(); | |
3268 | alowerboundary=umin; | |
3269 | aupperboundary=umax; | |
3270 | aParameter=U; | |
3271 | } | |
3272 | else { | |
3273 | aResolution=aGASurface->VResolution(aTol); | |
3274 | aPeriod=aGASurface->VPeriod(); | |
3275 | alowerboundary=vmin; | |
3276 | aupperboundary=vmax; | |
3277 | aParameter=V; | |
3278 | } | |
3279 | ||
3280 | anoffset = 0.; | |
3281 | anAdjustPar = AdjustPeriodic(aParameter, | |
3282 | alowerboundary, | |
3283 | aupperboundary, | |
3284 | aPeriod, | |
3285 | anoffset); | |
3286 | // | |
3287 | bIsOnFirstBoundary = Standard_True;// ? | |
3288 | bIsPointOnBoundary= | |
3289 | IsPointOnBoundary(anAdjustPar, | |
3290 | alowerboundary, | |
3291 | aupperboundary, | |
3292 | aResolution, | |
3293 | bIsOnFirstBoundary); | |
3294 | // | |
3295 | if(bIsPointOnBoundary) { | |
3296 | bIsCurrentPointOnBoundary = Standard_True; | |
3297 | break; | |
3298 | } | |
3299 | else { | |
3300 | // check if a point belong to a tangent zone. Begin | |
3301 | Standard_Integer zIt = 0; | |
3302 | for ( zIt = 1; zIt <= aNbZone; zIt++ ) { | |
3303 | gp_Pnt2d aPZone = (i == 0) ? aTanZoneS1->Value(zIt) : aTanZoneS2->Value(zIt); | |
3304 | Standard_Real aZoneRadius = aTanZoneRadius->Value(zIt); | |
3305 | ||
3306 | if ( IsInsideTanZone(gp_Pnt2d( U, V ), aPZone, aZoneRadius, aGASurface ) ) { | |
3307 | // set boundary flag to split the curve by a tangent zone | |
3308 | bIsPointOnBoundary = Standard_True; | |
3309 | bIsCurrentPointOnBoundary = Standard_True; | |
3310 | if ( theReachedTol3d < aZoneRadius ) { | |
3311 | theReachedTol3d = aZoneRadius; | |
3312 | } | |
3313 | break; | |
3314 | } | |
3315 | } | |
3316 | } | |
3317 | }//for(j = 0; j < 2; j++) { | |
3318 | ||
3319 | if(bIsCurrentPointOnBoundary){ | |
3320 | break; | |
3321 | } | |
3322 | }//for(i = 0; i < 2; ++i) { | |
3323 | // | |
3324 | if((bIsCurrentPointOnBoundary != bIsPrevPointOnBoundary)) { | |
3325 | if(!aListOfPointIndex.IsEmpty()) { | |
3326 | nblines++; | |
3327 | anArrayOfLines.SetValue(nblines, aListOfPointIndex); | |
3328 | anArrayOfLineType.SetValue(nblines, bIsPrevPointOnBoundary); | |
3329 | aListOfPointIndex.Clear(); | |
3330 | } | |
3331 | bIsPrevPointOnBoundary = bIsCurrentPointOnBoundary; | |
3332 | } | |
3333 | aListOfPointIndex.Append(pit); | |
3334 | } //for(pit = 1; pit <= aNbPnts; ++pit) { | |
3335 | // | |
3336 | if(!aListOfPointIndex.IsEmpty()) { | |
3337 | nblines++; | |
3338 | anArrayOfLines.SetValue(nblines, aListOfPointIndex); | |
3339 | anArrayOfLineType.SetValue(nblines, bIsPrevPointOnBoundary); | |
3340 | aListOfPointIndex.Clear(); | |
3341 | } | |
3342 | // | |
3343 | if(nblines<=1) { | |
3344 | return bRet; //Standard_False; | |
3345 | } | |
3346 | // | |
3347 | // | |
3348 | // 2. Correct wlines.begin | |
3349 | TColStd_Array1OfListOfInteger anArrayOfLineEnds(1, nblines); | |
3350 | Handle(IntSurf_LineOn2S) aSeqOfPntOn2S = new IntSurf_LineOn2S(); | |
3351 | // | |
3352 | for(i = 1; i <= nblines; i++) { | |
3353 | if(anArrayOfLineType.Value(i) != 0) { | |
3354 | continue; | |
3355 | } | |
3356 | const TColStd_ListOfInteger& aListOfIndex = anArrayOfLines.Value(i); | |
3357 | if(aListOfIndex.Extent() < 2) { | |
3358 | continue; | |
3359 | } | |
3360 | TColStd_ListOfInteger aListOfFLIndex; | |
3361 | ||
3362 | for(j = 0; j < 2; j++) { | |
3363 | Standard_Integer aneighbourindex = (j == 0) ? (i - 1) : (i + 1); | |
3364 | ||
3365 | if((aneighbourindex < 1) || (aneighbourindex > nblines)) | |
3366 | continue; | |
3367 | ||
3368 | if(anArrayOfLineType.Value(aneighbourindex) == 0) | |
3369 | continue; | |
3370 | const TColStd_ListOfInteger& aNeighbour = anArrayOfLines.Value(aneighbourindex); | |
3371 | Standard_Integer anIndex = (j == 0) ? aNeighbour.Last() : aNeighbour.First(); | |
3372 | const IntSurf_PntOn2S& aPoint = theWLine->Point(anIndex); | |
3373 | ||
3374 | IntSurf_PntOn2S aNewP = aPoint; | |
3375 | ||
3376 | for(Standard_Integer surfit = 0; surfit < 2; surfit++) { | |
3377 | ||
3378 | Handle(GeomAdaptor_HSurface) aGASurface = (surfit == 0) ? theSurface1 : theSurface2; | |
3379 | Standard_Real umin=0., umax=0., vmin=0., vmax=0.; | |
3380 | aGASurface->ChangeSurface().Surface()->Bounds(umin, umax, vmin, vmax); | |
3381 | Standard_Real U=0., V=0.; | |
3382 | ||
3383 | if(surfit == 0) | |
3384 | aNewP.ParametersOnS1(U, V); | |
3385 | else | |
3386 | aNewP.ParametersOnS2(U, V); | |
3387 | Standard_Integer nbboundaries = 0; | |
3388 | ||
3389 | Standard_Boolean bIsNearBoundary = Standard_False; | |
3390 | Standard_Integer aZoneIndex = 0; | |
3391 | Standard_Integer bIsUBoundary = Standard_False; // use if nbboundaries == 1 | |
3392 | Standard_Integer bIsFirstBoundary = Standard_False; // use if nbboundaries == 1 | |
3393 | ||
3394 | ||
3395 | for(Standard_Integer parit = 0; parit < 2; parit++) { | |
3396 | Standard_Boolean isperiodic = (parit == 0) ? aGASurface->IsUPeriodic() : aGASurface->IsVPeriodic(); | |
3397 | ||
3398 | Standard_Real aResolution = (parit == 0) ? aGASurface->UResolution(aTol) : aGASurface->VResolution(aTol); | |
3399 | Standard_Real alowerboundary = (parit == 0) ? umin : vmin; | |
3400 | Standard_Real aupperboundary = (parit == 0) ? umax : vmax; | |
3401 | ||
3402 | Standard_Real aParameter = (parit == 0) ? U : V; | |
3403 | Standard_Boolean bIsOnFirstBoundary = Standard_True; | |
3404 | ||
3405 | if(!isperiodic) { | |
3406 | bIsPointOnBoundary= | |
3407 | IsPointOnBoundary(aParameter, alowerboundary, aupperboundary, aResolution, bIsOnFirstBoundary); | |
3408 | if(bIsPointOnBoundary) { | |
3409 | bIsUBoundary = (parit == 0); | |
3410 | bIsFirstBoundary = bIsOnFirstBoundary; | |
3411 | nbboundaries++; | |
3412 | } | |
3413 | } | |
3414 | else { | |
3415 | Standard_Real aPeriod = (parit == 0) ? aGASurface->UPeriod() : aGASurface->VPeriod(); | |
3416 | Standard_Real anoffset = 0.; | |
3417 | Standard_Real anAdjustPar = AdjustPeriodic(aParameter, alowerboundary, aupperboundary, aPeriod, anoffset); | |
3418 | ||
3419 | bIsPointOnBoundary= | |
3420 | IsPointOnBoundary(anAdjustPar, alowerboundary, aupperboundary, aResolution, bIsOnFirstBoundary); | |
3421 | if(bIsPointOnBoundary) { | |
3422 | bIsUBoundary = (parit == 0); | |
3423 | bIsFirstBoundary = bIsOnFirstBoundary; | |
3424 | nbboundaries++; | |
3425 | } | |
3426 | else { | |
3427 | //check neighbourhood of boundary | |
3428 | Standard_Real anEpsilon = aResolution * 100.; | |
3429 | Standard_Real aPart = ( aupperboundary - alowerboundary ) * 0.1; | |
3430 | anEpsilon = ( anEpsilon > aPart ) ? aPart : anEpsilon; | |
3431 | ||
3432 | bIsNearBoundary = IsPointOnBoundary(anAdjustPar, alowerboundary, aupperboundary, | |
3433 | anEpsilon, bIsOnFirstBoundary); | |
3434 | ||
3435 | } | |
3436 | } | |
3437 | } | |
3438 | ||
3439 | // check if a point belong to a tangent zone. Begin | |
3440 | for ( Standard_Integer zIt = 1; zIt <= aNbZone; zIt++ ) { | |
3441 | gp_Pnt2d aPZone = (surfit == 0) ? aTanZoneS1->Value(zIt) : aTanZoneS2->Value(zIt); | |
3442 | Standard_Real aZoneRadius = aTanZoneRadius->Value(zIt); | |
3443 | ||
3444 | Standard_Integer aneighbourpointindex1 = (j == 0) ? aListOfIndex.First() : aListOfIndex.Last(); | |
3445 | const IntSurf_PntOn2S& aNeighbourPoint = theWLine->Point(aneighbourpointindex1); | |
3446 | Standard_Real nU1, nV1; | |
3447 | ||
3448 | if(surfit == 0) | |
3449 | aNeighbourPoint.ParametersOnS1(nU1, nV1); | |
3450 | else | |
3451 | aNeighbourPoint.ParametersOnS2(nU1, nV1); | |
3452 | gp_Pnt2d ap1(nU1, nV1); | |
3453 | gp_Pnt2d ap2 = AdjustByNeighbour( ap1, gp_Pnt2d( U, V ), aGASurface ); | |
3454 | ||
3455 | ||
3456 | if ( IsInsideTanZone( ap2, aPZone, aZoneRadius, aGASurface ) ) { | |
3457 | aZoneIndex = zIt; | |
3458 | bIsNearBoundary = Standard_True; | |
3459 | if ( theReachedTol3d < aZoneRadius ) { | |
3460 | theReachedTol3d = aZoneRadius; | |
3461 | } | |
3462 | } | |
3463 | } | |
3464 | // check if a point belong to a tangent zone. End | |
3465 | Standard_Boolean bComputeLineEnd = Standard_False; | |
3466 | ||
3467 | if(nbboundaries == 2) { | |
3468 | //xf | |
9e9df9d9 | 3469 | bComputeLineEnd = Standard_True; |
7fd59977 | 3470 | //xt |
3471 | } | |
3472 | else if(nbboundaries == 1) { | |
3473 | Standard_Boolean isperiodic = (bIsUBoundary) ? aGASurface->IsUPeriodic() : aGASurface->IsVPeriodic(); | |
3474 | ||
3475 | if(isperiodic) { | |
3476 | Standard_Real alowerboundary = (bIsUBoundary) ? umin : vmin; | |
3477 | Standard_Real aupperboundary = (bIsUBoundary) ? umax : vmax; | |
3478 | Standard_Real aPeriod = (bIsUBoundary) ? aGASurface->UPeriod() : aGASurface->VPeriod(); | |
3479 | Standard_Real aParameter = (bIsUBoundary) ? U : V; | |
3480 | Standard_Real anoffset = 0.; | |
3481 | Standard_Real anAdjustPar = AdjustPeriodic(aParameter, alowerboundary, aupperboundary, aPeriod, anoffset); | |
3482 | ||
3483 | Standard_Real adist = (bIsFirstBoundary) ? fabs(anAdjustPar - alowerboundary) : fabs(anAdjustPar - aupperboundary); | |
3484 | Standard_Real anotherPar = (bIsFirstBoundary) ? (aupperboundary - adist) : (alowerboundary + adist); | |
3485 | anotherPar += anoffset; | |
3486 | Standard_Integer aneighbourpointindex = (j == 0) ? aListOfIndex.First() : aListOfIndex.Last(); | |
3487 | const IntSurf_PntOn2S& aNeighbourPoint = theWLine->Point(aneighbourpointindex); | |
3488 | Standard_Real nU1, nV1; | |
3489 | ||
3490 | if(surfit == 0) | |
3491 | aNeighbourPoint.ParametersOnS1(nU1, nV1); | |
3492 | else | |
3493 | aNeighbourPoint.ParametersOnS2(nU1, nV1); | |
3494 | ||
3495 | Standard_Real adist1 = (bIsUBoundary) ? fabs(nU1 - U) : fabs(nV1 - V); | |
3496 | Standard_Real adist2 = (bIsUBoundary) ? fabs(nU1 - anotherPar) : fabs(nV1 - anotherPar); | |
3497 | bComputeLineEnd = Standard_True; | |
3498 | Standard_Boolean bCheckAngle1 = Standard_False; | |
3499 | Standard_Boolean bCheckAngle2 = Standard_False; | |
3500 | gp_Vec2d aNewVec; | |
3501 | Standard_Real anewU = (bIsUBoundary) ? anotherPar : U; | |
3502 | Standard_Real anewV = (bIsUBoundary) ? V : anotherPar; | |
3503 | ||
3504 | if(((adist1 - adist2) > Precision::PConfusion()) && | |
3505 | (adist2 < (aPeriod / 4.))) { | |
3506 | bCheckAngle1 = Standard_True; | |
3507 | aNewVec = gp_Vec2d(gp_Pnt2d(nU1, nV1), gp_Pnt2d(anewU, anewV)); | |
3508 | ||
3509 | if(aNewVec.SquareMagnitude() < (gp::Resolution() * gp::Resolution())) { | |
3510 | aNewP.SetValue((surfit == 0), anewU, anewV); | |
3511 | bCheckAngle1 = Standard_False; | |
3512 | } | |
3513 | } | |
3514 | else if(adist1 < (aPeriod / 4.)) { | |
3515 | bCheckAngle2 = Standard_True; | |
3516 | aNewVec = gp_Vec2d(gp_Pnt2d(nU1, nV1), gp_Pnt2d(U, V)); | |
3517 | ||
3518 | if(aNewVec.SquareMagnitude() < (gp::Resolution() * gp::Resolution())) { | |
3519 | bCheckAngle2 = Standard_False; | |
3520 | } | |
3521 | } | |
3522 | ||
3523 | if(bCheckAngle1 || bCheckAngle2) { | |
3524 | // assume there are at least two points in line (see "if" above) | |
3525 | Standard_Integer anindexother = aneighbourpointindex; | |
3526 | ||
3527 | while((anindexother <= aListOfIndex.Last()) && (anindexother >= aListOfIndex.First())) { | |
3528 | anindexother = (j == 0) ? (anindexother + 1) : (anindexother - 1); | |
3529 | const IntSurf_PntOn2S& aPrevNeighbourPoint = theWLine->Point(anindexother); | |
3530 | Standard_Real nU2, nV2; | |
3531 | ||
3532 | if(surfit == 0) | |
3533 | aPrevNeighbourPoint.ParametersOnS1(nU2, nV2); | |
3534 | else | |
3535 | aPrevNeighbourPoint.ParametersOnS2(nU2, nV2); | |
3536 | gp_Vec2d aVecOld(gp_Pnt2d(nU2, nV2), gp_Pnt2d(nU1, nV1)); | |
3537 | ||
3538 | if(aVecOld.SquareMagnitude() <= (gp::Resolution() * gp::Resolution())) { | |
3539 | continue; | |
3540 | } | |
3541 | else { | |
3542 | Standard_Real anAngle = aNewVec.Angle(aVecOld); | |
3543 | ||
3544 | if((fabs(anAngle) < (Standard_PI * 0.25)) && (aNewVec.Dot(aVecOld) > 0.)) { | |
3545 | ||
3546 | if(bCheckAngle1) { | |
3547 | Standard_Real U1, U2, V1, V2; | |
3548 | IntSurf_PntOn2S atmppoint = aNewP; | |
3549 | atmppoint.SetValue((surfit == 0), anewU, anewV); | |
3550 | atmppoint.Parameters(U1, V1, U2, V2); | |
3551 | gp_Pnt P1 = theSurface1->Value(U1, V1); | |
3552 | gp_Pnt P2 = theSurface2->Value(U2, V2); | |
3553 | gp_Pnt P0 = aPoint.Value(); | |
3554 | ||
3555 | if(P0.IsEqual(P1, aTol) && | |
3556 | P0.IsEqual(P2, aTol) && | |
3557 | P1.IsEqual(P2, aTol)) { | |
3558 | bComputeLineEnd = Standard_False; | |
3559 | aNewP.SetValue((surfit == 0), anewU, anewV); | |
3560 | } | |
3561 | } | |
3562 | ||
3563 | if(bCheckAngle2) { | |
3564 | bComputeLineEnd = Standard_False; | |
3565 | } | |
3566 | } | |
3567 | break; | |
3568 | } | |
3569 | } // end while(anindexother...) | |
3570 | } | |
3571 | } | |
3572 | } | |
3573 | else if ( bIsNearBoundary ) { | |
3574 | bComputeLineEnd = Standard_True; | |
3575 | } | |
3576 | ||
3577 | if(bComputeLineEnd) { | |
3578 | ||
3579 | gp_Pnt2d anewpoint; | |
3580 | Standard_Boolean found = Standard_False; | |
3581 | ||
3582 | if ( bIsNearBoundary ) { | |
3583 | // re-compute point near natural boundary or near tangent zone | |
3584 | Standard_Real u1, v1, u2, v2; | |
3585 | aNewP.Parameters( u1, v1, u2, v2 ); | |
3586 | if(surfit == 0) | |
3587 | anewpoint = gp_Pnt2d( u1, v1 ); | |
3588 | else | |
3589 | anewpoint = gp_Pnt2d( u2, v2 ); | |
3590 | ||
3591 | Standard_Integer aneighbourpointindex1 = (j == 0) ? aListOfIndex.First() : aListOfIndex.Last(); | |
3592 | const IntSurf_PntOn2S& aNeighbourPoint = theWLine->Point(aneighbourpointindex1); | |
3593 | Standard_Real nU1, nV1; | |
3594 | ||
3595 | if(surfit == 0) | |
3596 | aNeighbourPoint.ParametersOnS1(nU1, nV1); | |
3597 | else | |
3598 | aNeighbourPoint.ParametersOnS2(nU1, nV1); | |
3599 | gp_Pnt2d ap1(nU1, nV1); | |
3600 | gp_Pnt2d ap2; | |
3601 | ||
3602 | ||
3603 | if ( aZoneIndex ) { | |
3604 | // exclude point from a tangent zone | |
3605 | anewpoint = AdjustByNeighbour( ap1, anewpoint, aGASurface ); | |
3606 | gp_Pnt2d aPZone = (surfit == 0) ? aTanZoneS1->Value(aZoneIndex) : aTanZoneS2->Value(aZoneIndex); | |
3607 | Standard_Real aZoneRadius = aTanZoneRadius->Value(aZoneIndex); | |
3608 | ||
3609 | if ( FindPoint(ap1, anewpoint, umin, umax, vmin, vmax, | |
3610 | aPZone, aZoneRadius, aGASurface, ap2) ) { | |
3611 | anewpoint = ap2; | |
3612 | found = Standard_True; | |
3613 | } | |
3614 | } | |
3615 | else if ( aGASurface->IsUPeriodic() || aGASurface->IsVPeriodic() ) { | |
3616 | // re-compute point near boundary if shifted on a period | |
3617 | ap2 = AdjustByNeighbour( ap1, anewpoint, aGASurface ); | |
3618 | ||
3619 | if ( ( ap2.X() < umin ) || ( ap2.X() > umax ) || | |
3620 | ( ap2.Y() < vmin ) || ( ap2.Y() > vmax ) ) { | |
3621 | found = FindPoint(ap1, ap2, umin, umax, vmin, vmax, anewpoint); | |
3622 | } | |
3623 | else { | |
3624 | anewpoint = ap2; | |
3625 | aNewP.SetValue( (surfit == 0), anewpoint.X(), anewpoint.Y() ); | |
3626 | } | |
3627 | } | |
3628 | } | |
3629 | else { | |
3630 | ||
3631 | Standard_Integer aneighbourpointindex1 = (j == 0) ? aListOfIndex.First() : aListOfIndex.Last(); | |
3632 | const IntSurf_PntOn2S& aNeighbourPoint = theWLine->Point(aneighbourpointindex1); | |
3633 | Standard_Real nU1, nV1; | |
3634 | ||
3635 | if(surfit == 0) | |
3636 | aNeighbourPoint.ParametersOnS1(nU1, nV1); | |
3637 | else | |
3638 | aNeighbourPoint.ParametersOnS2(nU1, nV1); | |
3639 | gp_Pnt2d ap1(nU1, nV1); | |
3640 | gp_Pnt2d ap2(nU1, nV1); | |
3641 | Standard_Integer aneighbourpointindex2 = aneighbourpointindex1; | |
3642 | ||
3643 | while((aneighbourpointindex2 <= aListOfIndex.Last()) && (aneighbourpointindex2 >= aListOfIndex.First())) { | |
3644 | aneighbourpointindex2 = (j == 0) ? (aneighbourpointindex2 + 1) : (aneighbourpointindex2 - 1); | |
3645 | const IntSurf_PntOn2S& aPrevNeighbourPoint = theWLine->Point(aneighbourpointindex2); | |
3646 | Standard_Real nU2, nV2; | |
3647 | ||
3648 | if(surfit == 0) | |
3649 | aPrevNeighbourPoint.ParametersOnS1(nU2, nV2); | |
3650 | else | |
3651 | aPrevNeighbourPoint.ParametersOnS2(nU2, nV2); | |
3652 | ap2.SetX(nU2); | |
3653 | ap2.SetY(nV2); | |
3654 | ||
3655 | if(ap1.SquareDistance(ap2) > (gp::Resolution() * gp::Resolution())) { | |
3656 | break; | |
3657 | } | |
3658 | } | |
3659 | found = FindPoint(ap2, ap1, umin, umax, vmin, vmax, anewpoint); | |
3660 | } | |
3661 | ||
3662 | if(found) { | |
3663 | // check point | |
3664 | Standard_Real aCriteria = BRep_Tool::Tolerance(theFace1) + BRep_Tool::Tolerance(theFace2); | |
3665 | GeomAPI_ProjectPointOnSurf& aProjector = (surfit == 0) ? aContext.ProjPS(theFace2) : aContext.ProjPS(theFace1); | |
3666 | Handle(GeomAdaptor_HSurface) aSurface = (surfit == 0) ? theSurface1 : theSurface2; | |
3667 | ||
3668 | Handle(GeomAdaptor_HSurface) aSurfaceOther = (surfit == 0) ? theSurface2 : theSurface1; | |
3669 | ||
3670 | gp_Pnt aP3d = aSurface->Value(anewpoint.X(), anewpoint.Y()); | |
3671 | aProjector.Perform(aP3d); | |
3672 | ||
3673 | if(aProjector.IsDone()) { | |
3674 | if(aProjector.LowerDistance() < aCriteria) { | |
3675 | Standard_Real foundU = U, foundV = V; | |
3676 | aProjector.LowerDistanceParameters(foundU, foundV); | |
3677 | ||
3678 | //Correction of projected coordinates. Begin | |
3679 | //Note, it may be shifted on a period | |
3680 | Standard_Integer aneindex1 = (j == 0) ? aListOfIndex.First() : aListOfIndex.Last(); | |
3681 | const IntSurf_PntOn2S& aNeighbourPoint = theWLine->Point(aneindex1); | |
3682 | Standard_Real nUn, nVn; | |
3683 | ||
3684 | if(surfit == 0) | |
3685 | aNeighbourPoint.ParametersOnS2(nUn, nVn); | |
3686 | else | |
3687 | aNeighbourPoint.ParametersOnS1(nUn, nVn); | |
3688 | gp_Pnt2d aNeighbour2d(nUn, nVn); | |
3689 | gp_Pnt2d anAdjustedPoint = AdjustByNeighbour( aNeighbour2d, gp_Pnt2d(foundU, foundV), aSurfaceOther ); | |
3690 | foundU = anAdjustedPoint.X(); | |
3691 | foundV = anAdjustedPoint.Y(); | |
3692 | ||
3693 | if ( ( anAdjustedPoint.X() < umin ) && ( anAdjustedPoint.X() > umax ) && | |
3694 | ( anAdjustedPoint.Y() < vmin ) && ( anAdjustedPoint.Y() > vmax ) ) { | |
3695 | // attempt to roughly re-compute point | |
3696 | foundU = ( foundU < umin ) ? umin : foundU; | |
3697 | foundU = ( foundU > umax ) ? umax : foundU; | |
3698 | foundV = ( foundV < vmin ) ? vmin : foundV; | |
3699 | foundV = ( foundV > vmax ) ? vmax : foundV; | |
3700 | ||
3701 | GeomAPI_ProjectPointOnSurf& aProjector2 = (surfit == 0) ? aContext.ProjPS(theFace1) : aContext.ProjPS(theFace2); | |
3702 | ||
3703 | aP3d = aSurfaceOther->Value(foundU, foundV); | |
3704 | aProjector2.Perform(aP3d); | |
3705 | ||
3706 | if(aProjector2.IsDone()) { | |
3707 | if(aProjector2.LowerDistance() < aCriteria) { | |
3708 | Standard_Real foundU2 = anewpoint.X(), foundV2 = anewpoint.Y(); | |
3709 | aProjector2.LowerDistanceParameters(foundU2, foundV2); | |
3710 | anewpoint.SetX(foundU2); | |
3711 | anewpoint.SetY(foundV2); | |
3712 | } | |
3713 | } | |
3714 | } | |
3715 | //Correction of projected coordinates. End | |
3716 | ||
3717 | if(surfit == 0) | |
3718 | aNewP.SetValue(aP3d, anewpoint.X(), anewpoint.Y(), foundU, foundV); | |
3719 | else | |
3720 | aNewP.SetValue(aP3d, foundU, foundV, anewpoint.X(), anewpoint.Y()); | |
3721 | } | |
3722 | } | |
3723 | } | |
3724 | } | |
3725 | } | |
3726 | aSeqOfPntOn2S->Add(aNewP); | |
3727 | aListOfFLIndex.Append(aSeqOfPntOn2S->NbPoints()); | |
3728 | } | |
3729 | anArrayOfLineEnds.SetValue(i, aListOfFLIndex); | |
3730 | } | |
3731 | // Correct wlines.end | |
3732 | ||
3733 | // Split wlines.begin | |
3734 | Standard_Integer nbiter; | |
3735 | // | |
3736 | nbiter=1; | |
3737 | if (!bAvoidLineConstructor) { | |
3738 | nbiter=theLConstructor.NbParts(); | |
3739 | } | |
3740 | // | |
3741 | for(j = 1; j <= nbiter; ++j) { | |
3742 | Standard_Real fprm, lprm; | |
3743 | Standard_Integer ifprm, ilprm; | |
3744 | // | |
3745 | if(bAvoidLineConstructor) { | |
3746 | ifprm = 1; | |
3747 | ilprm = theWLine->NbPnts(); | |
3748 | } | |
3749 | else { | |
3750 | theLConstructor.Part(j, fprm, lprm); | |
3751 | ifprm = (Standard_Integer)fprm; | |
3752 | ilprm = (Standard_Integer)lprm; | |
3753 | } | |
3754 | ||
3755 | Handle(IntSurf_LineOn2S) aLineOn2S = new IntSurf_LineOn2S(); | |
3756 | // | |
3757 | for(i = 1; i <= nblines; i++) { | |
3758 | if(anArrayOfLineType.Value(i) != 0) { | |
3759 | continue; | |
3760 | } | |
3761 | const TColStd_ListOfInteger& aListOfIndex = anArrayOfLines.Value(i); | |
3762 | ||
3763 | if(aListOfIndex.Extent() < 2) { | |
3764 | continue; | |
3765 | } | |
3766 | const TColStd_ListOfInteger& aListOfFLIndex = anArrayOfLineEnds.Value(i); | |
3767 | Standard_Boolean bhasfirstpoint = (aListOfFLIndex.Extent() == 2); | |
3768 | Standard_Boolean bhaslastpoint = (aListOfFLIndex.Extent() == 2); | |
3769 | ||
3770 | if(!bhasfirstpoint && !aListOfFLIndex.IsEmpty()) { | |
3771 | bhasfirstpoint = (i != 1); | |
3772 | } | |
3773 | ||
3774 | if(!bhaslastpoint && !aListOfFLIndex.IsEmpty()) { | |
3775 | bhaslastpoint = (i != nblines); | |
3776 | } | |
3777 | Standard_Boolean bIsFirstInside = ((ifprm >= aListOfIndex.First()) && (ifprm <= aListOfIndex.Last())); | |
3778 | Standard_Boolean bIsLastInside = ((ilprm >= aListOfIndex.First()) && (ilprm <= aListOfIndex.Last())); | |
3779 | ||
3780 | if(!bIsFirstInside && !bIsLastInside) { | |
3781 | if((ifprm < aListOfIndex.First()) && (ilprm > aListOfIndex.Last())) { | |
3782 | // append whole line, and boundaries if neccesary | |
3783 | if(bhasfirstpoint) { | |
3784 | const IntSurf_PntOn2S& aP = aSeqOfPntOn2S->Value(aListOfFLIndex.First()); | |
3785 | aLineOn2S->Add(aP); | |
3786 | } | |
3787 | TColStd_ListIteratorOfListOfInteger anIt(aListOfIndex); | |
3788 | ||
3789 | for(; anIt.More(); anIt.Next()) { | |
3790 | const IntSurf_PntOn2S& aP = theWLine->Point(anIt.Value()); | |
3791 | aLineOn2S->Add(aP); | |
3792 | } | |
3793 | ||
3794 | if(bhaslastpoint) { | |
3795 | const IntSurf_PntOn2S& aP = aSeqOfPntOn2S->Value(aListOfFLIndex.Last()); | |
3796 | aLineOn2S->Add(aP); | |
3797 | } | |
3798 | ||
3799 | // check end of split line (end is almost always) | |
3800 | Standard_Integer aneighbour = i + 1; | |
3801 | Standard_Boolean bIsEndOfLine = Standard_True; | |
3802 | ||
3803 | if(aneighbour <= nblines) { | |
3804 | const TColStd_ListOfInteger& aListOfNeighbourIndex = anArrayOfLines.Value(aneighbour); | |
3805 | ||
3806 | if((anArrayOfLineType.Value(aneighbour) != 0) && | |
3807 | (aListOfNeighbourIndex.IsEmpty())) { | |
3808 | bIsEndOfLine = Standard_False; | |
3809 | } | |
3810 | } | |
3811 | ||
3812 | if(bIsEndOfLine) { | |
3813 | if(aLineOn2S->NbPoints() > 1) { | |
3814 | Handle(IntPatch_WLine) aNewWLine = | |
3815 | new IntPatch_WLine(aLineOn2S, Standard_False); | |
3816 | theNewLines.Append(aNewWLine); | |
3817 | } | |
3818 | aLineOn2S = new IntSurf_LineOn2S(); | |
3819 | } | |
3820 | } | |
3821 | continue; | |
3822 | } | |
3823 | // end if(!bIsFirstInside && !bIsLastInside) | |
3824 | ||
3825 | if(bIsFirstInside && bIsLastInside) { | |
3826 | // append inside points between ifprm and ilprm | |
3827 | TColStd_ListIteratorOfListOfInteger anIt(aListOfIndex); | |
3828 | ||
3829 | for(; anIt.More(); anIt.Next()) { | |
3830 | if((anIt.Value() < ifprm) || (anIt.Value() > ilprm)) | |
3831 | continue; | |
3832 | const IntSurf_PntOn2S& aP = theWLine->Point(anIt.Value()); | |
3833 | aLineOn2S->Add(aP); | |
3834 | } | |
3835 | } | |
3836 | else { | |
3837 | ||
3838 | if(bIsFirstInside) { | |
3839 | // append points from ifprm to last point + boundary point | |
3840 | TColStd_ListIteratorOfListOfInteger anIt(aListOfIndex); | |
3841 | ||
3842 | for(; anIt.More(); anIt.Next()) { | |
3843 | if(anIt.Value() < ifprm) | |
3844 | continue; | |
3845 | const IntSurf_PntOn2S& aP = theWLine->Point(anIt.Value()); | |
3846 | aLineOn2S->Add(aP); | |
3847 | } | |
3848 | ||
3849 | if(bhaslastpoint) { | |
3850 | const IntSurf_PntOn2S& aP = aSeqOfPntOn2S->Value(aListOfFLIndex.Last()); | |
3851 | aLineOn2S->Add(aP); | |
3852 | } | |
3853 | // check end of split line (end is almost always) | |
3854 | Standard_Integer aneighbour = i + 1; | |
3855 | Standard_Boolean bIsEndOfLine = Standard_True; | |
3856 | ||
3857 | if(aneighbour <= nblines) { | |
3858 | const TColStd_ListOfInteger& aListOfNeighbourIndex = anArrayOfLines.Value(aneighbour); | |
3859 | ||
3860 | if((anArrayOfLineType.Value(aneighbour) != 0) && | |
3861 | (aListOfNeighbourIndex.IsEmpty())) { | |
3862 | bIsEndOfLine = Standard_False; | |
3863 | } | |
3864 | } | |
3865 | ||
3866 | if(bIsEndOfLine) { | |
3867 | if(aLineOn2S->NbPoints() > 1) { | |
3868 | Handle(IntPatch_WLine) aNewWLine = | |
3869 | new IntPatch_WLine(aLineOn2S, Standard_False); | |
3870 | theNewLines.Append(aNewWLine); | |
3871 | } | |
3872 | aLineOn2S = new IntSurf_LineOn2S(); | |
3873 | } | |
3874 | } | |
3875 | // end if(bIsFirstInside) | |
3876 | ||
3877 | if(bIsLastInside) { | |
3878 | // append points from first boundary point to ilprm | |
3879 | if(bhasfirstpoint) { | |
3880 | const IntSurf_PntOn2S& aP = aSeqOfPntOn2S->Value(aListOfFLIndex.First()); | |
3881 | aLineOn2S->Add(aP); | |
3882 | } | |
3883 | TColStd_ListIteratorOfListOfInteger anIt(aListOfIndex); | |
3884 | ||
3885 | for(; anIt.More(); anIt.Next()) { | |
3886 | if(anIt.Value() > ilprm) | |
3887 | continue; | |
3888 | const IntSurf_PntOn2S& aP = theWLine->Point(anIt.Value()); | |
3889 | aLineOn2S->Add(aP); | |
3890 | } | |
3891 | } | |
3892 | //end if(bIsLastInside) | |
3893 | } | |
3894 | } | |
3895 | ||
3896 | if(aLineOn2S->NbPoints() > 1) { | |
3897 | Handle(IntPatch_WLine) aNewWLine = | |
3898 | new IntPatch_WLine(aLineOn2S, Standard_False); | |
3899 | theNewLines.Append(aNewWLine); | |
3900 | } | |
3901 | } | |
3902 | // Split wlines.end | |
3903 | ||
3904 | return Standard_True; | |
3905 | } | |
3906 | ||
3907 | // ------------------------------------------------------------------------------------------------ | |
3908 | // static function: ParameterOutOfBoundary | |
3909 | // purpose: Computes a new parameter for given curve. The corresponding 2d points | |
0fc4f2e2 | 3910 | // does not lay on any boundary of given faces |
7fd59977 | 3911 | // ------------------------------------------------------------------------------------------------ |
3912 | Standard_Boolean ParameterOutOfBoundary(const Standard_Real theParameter, | |
3913 | const Handle(Geom_Curve)& theCurve, | |
3914 | const TopoDS_Face& theFace1, | |
3915 | const TopoDS_Face& theFace2, | |
3916 | const Standard_Real theOtherParameter, | |
3917 | const Standard_Boolean bIncreasePar, | |
3918 | Standard_Real& theNewParameter) { | |
3919 | Standard_Boolean bIsComputed = Standard_False; | |
3920 | theNewParameter = theParameter; | |
3921 | ||
3922 | IntTools_Context aContext; | |
3923 | Standard_Real acurpar = theParameter; | |
3924 | TopAbs_State aState = TopAbs_ON; | |
3925 | Standard_Integer iter = 0; | |
3926 | Standard_Real asumtol = BRep_Tool::Tolerance(theFace1) + BRep_Tool::Tolerance(theFace2); | |
3927 | Standard_Real adelta = asumtol * 0.1; | |
3928 | adelta = (adelta < Precision::Confusion()) ? Precision::Confusion() : adelta; | |
3929 | Handle(Geom_Surface) aSurf1 = BRep_Tool::Surface(theFace1); | |
3930 | Handle(Geom_Surface) aSurf2 = BRep_Tool::Surface(theFace2); | |
3931 | ||
3932 | Standard_Real u1, u2, v1, v2; | |
3933 | ||
3934 | GeomAPI_ProjectPointOnSurf aPrj1; | |
3935 | aSurf1->Bounds(u1, u2, v1, v2); | |
3936 | aPrj1.Init(aSurf1, u1, u2, v1, v2); | |
3937 | ||
3938 | GeomAPI_ProjectPointOnSurf aPrj2; | |
3939 | aSurf2->Bounds(u1, u2, v1, v2); | |
3940 | aPrj2.Init(aSurf2, u1, u2, v1, v2); | |
3941 | ||
3942 | while(aState == TopAbs_ON) { | |
3943 | if(bIncreasePar) | |
3944 | acurpar += adelta; | |
3945 | else | |
3946 | acurpar -= adelta; | |
3947 | gp_Pnt aPCurrent = theCurve->Value(acurpar); | |
3948 | aPrj1.Perform(aPCurrent); | |
3949 | Standard_Real U=0., V=0.; | |
3950 | ||
3951 | if(aPrj1.IsDone()) { | |
3952 | aPrj1.LowerDistanceParameters(U, V); | |
3953 | aState = aContext.StatePointFace(theFace1, gp_Pnt2d(U, V)); | |
3954 | } | |
3955 | ||
3956 | if(aState != TopAbs_ON) { | |
3957 | aPrj2.Perform(aPCurrent); | |
3958 | ||
3959 | if(aPrj2.IsDone()) { | |
3960 | aPrj2.LowerDistanceParameters(U, V); | |
3961 | aState = aContext.StatePointFace(theFace2, gp_Pnt2d(U, V)); | |
3962 | } | |
3963 | } | |
3964 | ||
3965 | if(iter > 11) { | |
3966 | break; | |
3967 | } | |
3968 | iter++; | |
3969 | } | |
3970 | ||
3971 | if(iter <= 11) { | |
3972 | theNewParameter = acurpar; | |
3973 | bIsComputed = Standard_True; | |
3974 | ||
3975 | if(bIncreasePar) { | |
3976 | if(acurpar >= theOtherParameter) | |
3977 | theNewParameter = theOtherParameter; | |
3978 | } | |
3979 | else { | |
3980 | if(acurpar <= theOtherParameter) | |
3981 | theNewParameter = theOtherParameter; | |
3982 | } | |
3983 | } | |
3984 | return bIsComputed; | |
3985 | } | |
3986 | ||
0fc4f2e2 P |
3987 | //======================================================================= |
3988 | //function : IsCurveValid | |
3989 | //purpose : | |
3990 | //======================================================================= | |
7fd59977 | 3991 | Standard_Boolean IsCurveValid(Handle(Geom2d_Curve)& thePCurve) |
3992 | { | |
3993 | if(thePCurve.IsNull()) | |
3994 | return Standard_False; | |
3995 | ||
3996 | Standard_Real tolint = 1.e-10; | |
3997 | Geom2dAdaptor_Curve PCA; | |
3998 | IntRes2d_Domain PCD; | |
3999 | Geom2dInt_GInter PCI; | |
4000 | ||
4001 | Standard_Real pf = 0., pl = 0.; | |
4002 | gp_Pnt2d pntf, pntl; | |
4003 | ||
4004 | if(!thePCurve->IsClosed() && !thePCurve->IsPeriodic()) { | |
4005 | pf = thePCurve->FirstParameter(); | |
4006 | pl = thePCurve->LastParameter(); | |
4007 | pntf = thePCurve->Value(pf); | |
4008 | pntl = thePCurve->Value(pl); | |
4009 | PCA.Load(thePCurve); | |
4010 | if(!PCA.IsPeriodic()) { | |
4011 | if(PCA.FirstParameter() > pf) pf = PCA.FirstParameter(); | |
4012 | if(PCA.LastParameter() < pl) pl = PCA.LastParameter(); | |
4013 | } | |
4014 | PCD.SetValues(pntf,pf,tolint,pntl,pl,tolint); | |
4015 | PCI.Perform(PCA,PCD,tolint,tolint); | |
4016 | if(PCI.IsDone()) | |
4017 | if(PCI.NbPoints() > 0) { | |
4018 | return Standard_False; | |
4019 | } | |
4020 | } | |
4021 | ||
4022 | return Standard_True; | |
4023 | } | |
4024 | ||
4025 | //======================================================================= | |
4026 | //static function : ApproxWithPCurves | |
4027 | //purpose : for bug 20964 only | |
4028 | //======================================================================= | |
7fd59977 | 4029 | Standard_Boolean ApproxWithPCurves(const gp_Cylinder& theCyl, |
4030 | const gp_Sphere& theSph) | |
4031 | { | |
4032 | Standard_Boolean bRes = Standard_True; | |
4033 | Standard_Real R1 = theCyl.Radius(), R2 = theSph.Radius(); | |
4034 | ||
4035 | if(R1 < 2.*R2) return bRes; | |
4036 | ||
4037 | gp_Lin anCylAx(theCyl.Axis()); | |
4038 | ||
4039 | Standard_Real aDist = anCylAx.Distance(theSph.Location()); | |
4040 | Standard_Real aDRel = Abs(aDist - R1)/R2; | |
4041 | ||
4042 | if(aDRel > .2) return bRes; | |
4043 | ||
4044 | Standard_Real par = ElCLib::Parameter(anCylAx, theSph.Location()); | |
4045 | gp_Pnt aP = ElCLib::Value(par, anCylAx); | |
4046 | gp_Vec aV(aP, theSph.Location()); | |
4047 | ||
4048 | Standard_Real dd = aV.Dot(theSph.Position().XDirection()); | |
4049 | ||
4050 | if(aDist < R1 && dd > 0.) return Standard_False; | |
4051 | if(aDist > R1 && dd < 0.) return Standard_False; | |
4052 | ||
4053 | ||
4054 | return bRes; | |
4055 | } | |
7fd59977 | 4056 | //======================================================================= |
4057 | //function : PerformPlanes | |
4058 | //purpose : | |
4059 | //======================================================================= | |
7fd59977 | 4060 | void PerformPlanes(const Handle(GeomAdaptor_HSurface)& theS1, |
4061 | const Handle(GeomAdaptor_HSurface)& theS2, | |
4062 | const Standard_Real TolAng, | |
4063 | const Standard_Real TolTang, | |
4064 | const Standard_Boolean theApprox1, | |
4065 | const Standard_Boolean theApprox2, | |
4066 | IntTools_SequenceOfCurves& theSeqOfCurve, | |
4067 | Standard_Boolean& theTangentFaces) | |
4068 | { | |
4069 | ||
4070 | gp_Pln aPln1 = theS1->Surface().Plane(); | |
4071 | gp_Pln aPln2 = theS2->Surface().Plane(); | |
4072 | ||
4073 | IntAna_QuadQuadGeo aPlnInter(aPln1, aPln2, TolAng, TolTang); | |
4074 | ||
4075 | if(!aPlnInter.IsDone()) { | |
4076 | theTangentFaces = Standard_False; | |
4077 | return; | |
4078 | } | |
4079 | ||
4080 | IntAna_ResultType aResType = aPlnInter.TypeInter(); | |
4081 | ||
4082 | if(aResType == IntAna_Same) { | |
4083 | theTangentFaces = Standard_True; | |
4084 | return; | |
4085 | } | |
4086 | ||
4087 | theTangentFaces = Standard_False; | |
4088 | ||
4089 | if(aResType == IntAna_Empty) { | |
4090 | return; | |
4091 | } | |
4092 | ||
4093 | gp_Lin aLin = aPlnInter.Line(1); | |
4094 | ||
4095 | ProjLib_Plane aProj; | |
4096 | ||
4097 | aProj.Init(aPln1); | |
4098 | aProj.Project(aLin); | |
4099 | gp_Lin2d aLin2d1 = aProj.Line(); | |
4100 | // | |
4101 | aProj.Init(aPln2); | |
4102 | aProj.Project(aLin); | |
4103 | gp_Lin2d aLin2d2 = aProj.Line(); | |
4104 | // | |
4105 | //classify line2d1 relatively first plane | |
4106 | Standard_Real P11, P12; | |
4107 | Standard_Boolean IsCrossed = ClassifyLin2d(theS1, aLin2d1, TolTang, P11, P12); | |
4108 | if(!IsCrossed) return; | |
4109 | //classify line2d2 relatively second plane | |
4110 | Standard_Real P21, P22; | |
4111 | IsCrossed = ClassifyLin2d(theS2, aLin2d2, TolTang, P21, P22); | |
4112 | if(!IsCrossed) return; | |
4113 | ||
4114 | //Analysis of parametric intervals: must have common part | |
4115 | ||
4116 | if(P21 >= P12) return; | |
4117 | if(P22 <= P11) return; | |
4118 | ||
4119 | Standard_Real pmin, pmax; | |
4120 | pmin = Max(P11, P21); | |
4121 | pmax = Min(P12, P22); | |
4122 | ||
4123 | if(pmax - pmin <= TolTang) return; | |
4124 | ||
4125 | Handle(Geom_Line) aGLin = new Geom_Line(aLin); | |
4126 | ||
4127 | IntTools_Curve aCurve; | |
4128 | Handle(Geom_TrimmedCurve) aGTLin = new Geom_TrimmedCurve(aGLin, pmin, pmax); | |
4129 | ||
4130 | aCurve.SetCurve(aGTLin); | |
4131 | ||
4132 | if(theApprox1) { | |
4133 | Handle(Geom2d_Line) C2d = new Geom2d_Line(aLin2d1); | |
4134 | aCurve.SetFirstCurve2d(new Geom2d_TrimmedCurve(C2d, pmin, pmax)); | |
4135 | } | |
4136 | else { | |
4137 | Handle(Geom2d_Curve) H1; | |
4138 | aCurve.SetFirstCurve2d(H1); | |
4139 | } | |
4140 | if(theApprox2) { | |
4141 | Handle(Geom2d_Line) C2d = new Geom2d_Line(aLin2d2); | |
4142 | aCurve.SetSecondCurve2d(new Geom2d_TrimmedCurve(C2d, pmin, pmax)); | |
4143 | } | |
4144 | else { | |
4145 | Handle(Geom2d_Curve) H1; | |
4146 | aCurve.SetFirstCurve2d(H1); | |
4147 | } | |
4148 | ||
4149 | theSeqOfCurve.Append(aCurve); | |
4150 | ||
4151 | } | |
4152 | ||
4153 | //======================================================================= | |
4154 | //function : ClassifyLin2d | |
4155 | //purpose : | |
4156 | //======================================================================= | |
4157 | static inline Standard_Boolean INTER(const Standard_Real d1, | |
4158 | const Standard_Real d2, | |
4159 | const Standard_Real tol) | |
4160 | { | |
4161 | return (d1 > tol && d2 < -tol) || | |
4162 | (d1 < -tol && d2 > tol) || | |
4163 | ((d1 <= tol && d1 >= -tol) && (d2 > tol || d2 < -tol)) || | |
4164 | ((d2 <= tol && d2 >= -tol) && (d1 > tol || d1 < -tol)); | |
4165 | } | |
4166 | static inline Standard_Boolean COINC(const Standard_Real d1, | |
4167 | const Standard_Real d2, | |
4168 | const Standard_Real tol) | |
4169 | { | |
4170 | return (d1 <= tol && d1 >= -tol) && (d2 <= tol && d2 >= -tol); | |
4171 | } | |
4172 | Standard_Boolean ClassifyLin2d(const Handle(GeomAdaptor_HSurface)& theS, | |
4173 | const gp_Lin2d& theLin2d, | |
4174 | const Standard_Real theTol, | |
4175 | Standard_Real& theP1, | |
4176 | Standard_Real& theP2) | |
4177 | ||
4178 | { | |
4179 | Standard_Real xmin, xmax, ymin, ymax, d1, d2, A, B, C; | |
4180 | Standard_Real par[2]; | |
4181 | Standard_Integer nbi = 0; | |
4182 | ||
4183 | xmin = theS->Surface().FirstUParameter(); | |
4184 | xmax = theS->Surface().LastUParameter(); | |
4185 | ymin = theS->Surface().FirstVParameter(); | |
4186 | ymax = theS->Surface().LastVParameter(); | |
4187 | ||
4188 | theLin2d.Coefficients(A, B, C); | |
4189 | ||
4190 | //xmin, ymin <-> xmin, ymax | |
4191 | d1 = A*xmin + B*ymin + C; | |
4192 | d2 = A*xmin + B*ymax + C; | |
4193 | ||
4194 | if(INTER(d1, d2, theTol)) { | |
4195 | //Intersection with boundary | |
4196 | Standard_Real y = -(C + A*xmin)/B; | |
4197 | par[nbi] = ElCLib::Parameter(theLin2d, gp_Pnt2d(xmin, y)); | |
4198 | nbi++; | |
4199 | } | |
4200 | else if (COINC(d1, d2, theTol)) { | |
4201 | //Coincidence with boundary | |
4202 | par[0] = ElCLib::Parameter(theLin2d, gp_Pnt2d(xmin, ymin)); | |
4203 | par[1] = ElCLib::Parameter(theLin2d, gp_Pnt2d(xmin, ymax)); | |
4204 | nbi = 2; | |
4205 | } | |
4206 | ||
4207 | if(nbi == 2) { | |
4208 | ||
4209 | if(fabs(par[0]-par[1]) > theTol) { | |
4210 | theP1 = Min(par[0], par[1]); | |
4211 | theP2 = Max(par[0], par[1]); | |
4212 | return Standard_True; | |
4213 | } | |
4214 | else return Standard_False; | |
4215 | ||
4216 | } | |
4217 | ||
4218 | //xmin, ymax <-> xmax, ymax | |
4219 | d1 = d2; | |
4220 | d2 = A*xmax + B*ymax + C; | |
4221 | ||
4222 | if(d1 > theTol || d1 < -theTol) {//to avoid checking of | |
4223 | //coincidence with the same point | |
4224 | if(INTER(d1, d2, theTol)) { | |
4225 | Standard_Real x = -(C + B*ymax)/A; | |
4226 | par[nbi] = ElCLib::Parameter(theLin2d, gp_Pnt2d(x, ymax)); | |
4227 | nbi++; | |
4228 | } | |
4229 | else if (COINC(d1, d2, theTol)) { | |
4230 | par[0] = ElCLib::Parameter(theLin2d, gp_Pnt2d(xmin, ymax)); | |
4231 | par[1] = ElCLib::Parameter(theLin2d, gp_Pnt2d(xmax, ymax)); | |
4232 | nbi = 2; | |
4233 | } | |
4234 | } | |
4235 | ||
4236 | if(nbi == 2) { | |
4237 | ||
4238 | if(fabs(par[0]-par[1]) > theTol) { | |
4239 | theP1 = Min(par[0], par[1]); | |
4240 | theP2 = Max(par[0], par[1]); | |
4241 | return Standard_True; | |
4242 | } | |
4243 | else return Standard_False; | |
4244 | ||
4245 | } | |
4246 | ||
4247 | //xmax, ymax <-> xmax, ymin | |
4248 | d1 = d2; | |
4249 | d2 = A*xmax + B*ymin + C; | |
4250 | ||
4251 | if(d1 > theTol || d1 < -theTol) { | |
4252 | if(INTER(d1, d2, theTol)) { | |
4253 | Standard_Real y = -(C + A*xmax)/B; | |
4254 | par[nbi] = ElCLib::Parameter(theLin2d, gp_Pnt2d(xmax, y)); | |
4255 | nbi++; | |
4256 | } | |
4257 | else if (COINC(d1, d2, theTol)) { | |
4258 | par[0] = ElCLib::Parameter(theLin2d, gp_Pnt2d(xmax, ymax)); | |
4259 | par[1] = ElCLib::Parameter(theLin2d, gp_Pnt2d(xmax, ymin)); | |
4260 | nbi = 2; | |
4261 | } | |
4262 | } | |
4263 | ||
4264 | if(nbi == 2) { | |
4265 | if(fabs(par[0]-par[1]) > theTol) { | |
4266 | theP1 = Min(par[0], par[1]); | |
4267 | theP2 = Max(par[0], par[1]); | |
4268 | return Standard_True; | |
4269 | } | |
4270 | else return Standard_False; | |
4271 | } | |
4272 | ||
4273 | //xmax, ymin <-> xmin, ymin | |
4274 | d1 = d2; | |
4275 | d2 = A*xmin + B*ymin + C; | |
4276 | ||
4277 | if(d1 > theTol || d1 < -theTol) { | |
4278 | if(INTER(d1, d2, theTol)) { | |
4279 | Standard_Real x = -(C + B*ymin)/A; | |
4280 | par[nbi] = ElCLib::Parameter(theLin2d, gp_Pnt2d(x, ymin)); | |
4281 | nbi++; | |
4282 | } | |
4283 | else if (COINC(d1, d2, theTol)) { | |
4284 | par[0] = ElCLib::Parameter(theLin2d, gp_Pnt2d(xmax, ymin)); | |
4285 | par[1] = ElCLib::Parameter(theLin2d, gp_Pnt2d(xmin, ymin)); | |
4286 | nbi = 2; | |
4287 | } | |
4288 | } | |
4289 | ||
4290 | if(nbi == 2) { | |
4291 | if(fabs(par[0]-par[1]) > theTol) { | |
4292 | theP1 = Min(par[0], par[1]); | |
4293 | theP2 = Max(par[0], par[1]); | |
4294 | return Standard_True; | |
4295 | } | |
4296 | else return Standard_False; | |
4297 | } | |
4298 | ||
4299 | return Standard_False; | |
4300 | ||
4301 | } | |
4302 | // | |
7fd59977 | 4303 | //======================================================================= |
4304 | //function : ApproxParameters | |
4305 | //purpose : | |
4306 | //======================================================================= | |
4307 | void ApproxParameters(const Handle(GeomAdaptor_HSurface)& aHS1, | |
4308 | const Handle(GeomAdaptor_HSurface)& aHS2, | |
4309 | Standard_Integer& iDegMin, | |
0fc4f2e2 | 4310 | Standard_Integer& iDegMax) |
7fd59977 | 4311 | { |
4312 | GeomAbs_SurfaceType aTS1, aTS2; | |
0fc4f2e2 | 4313 | |
7fd59977 | 4314 | // |
4315 | iDegMin=4; | |
4316 | iDegMax=8; | |
7fd59977 | 4317 | // |
4318 | aTS1=aHS1->Surface().GetType(); | |
4319 | aTS2=aHS2->Surface().GetType(); | |
4320 | // | |
4321 | // Cylinder/Torus | |
4322 | if ((aTS1==GeomAbs_Cylinder && aTS2==GeomAbs_Torus) || | |
4323 | (aTS2==GeomAbs_Cylinder && aTS1==GeomAbs_Torus)) { | |
0fc4f2e2 | 4324 | Standard_Real aRC, aRT, dR, aPC; |
7fd59977 | 4325 | gp_Cylinder aCylinder; |
4326 | gp_Torus aTorus; | |
4327 | // | |
4328 | aPC=Precision::Confusion(); | |
4329 | // | |
0fc4f2e2 P |
4330 | aCylinder=(aTS1==GeomAbs_Cylinder)? aHS1->Surface().Cylinder() : aHS2->Surface().Cylinder(); |
4331 | aTorus=(aTS1==GeomAbs_Torus)? aHS1->Surface().Torus() : aHS2->Surface().Torus(); | |
7fd59977 | 4332 | // |
4333 | aRC=aCylinder.Radius(); | |
4334 | aRT=aTorus.MinorRadius(); | |
4335 | dR=aRC-aRT; | |
4336 | if (dR<0.) { | |
4337 | dR=-dR; | |
4338 | } | |
4339 | // | |
4340 | if (dR<aPC) { | |
0fc4f2e2 P |
4341 | iDegMax=6; |
4342 | } | |
4343 | } | |
4344 | } | |
4345 | //======================================================================= | |
4346 | //function : Tolerances | |
4347 | //purpose : | |
4348 | //======================================================================= | |
4349 | void Tolerances(const Handle(GeomAdaptor_HSurface)& aHS1, | |
4350 | const Handle(GeomAdaptor_HSurface)& aHS2, | |
4351 | Standard_Real& ,//aTolArc, | |
4352 | Standard_Real& aTolTang, | |
4353 | Standard_Real& ,//aUVMaxStep, | |
4354 | Standard_Real& )//aDeflection) | |
4355 | { | |
4356 | GeomAbs_SurfaceType aTS1, aTS2; | |
4357 | // | |
4358 | aTS1=aHS1->Surface().GetType(); | |
4359 | aTS2=aHS2->Surface().GetType(); | |
4360 | // | |
4361 | // Cylinder/Torus | |
4362 | if ((aTS1==GeomAbs_Cylinder && aTS2==GeomAbs_Torus) || | |
4363 | (aTS2==GeomAbs_Cylinder && aTS1==GeomAbs_Torus)) { | |
4364 | Standard_Real aRC, aRT, dR, aPC; | |
4365 | gp_Cylinder aCylinder; | |
4366 | gp_Torus aTorus; | |
4367 | // | |
4368 | aPC=Precision::Confusion(); | |
4369 | // | |
4370 | aCylinder=(aTS1==GeomAbs_Cylinder)? aHS1->Surface().Cylinder() : aHS2->Surface().Cylinder(); | |
4371 | aTorus=(aTS1==GeomAbs_Torus)? aHS1->Surface().Torus() : aHS2->Surface().Torus(); | |
4372 | // | |
4373 | aRC=aCylinder.Radius(); | |
4374 | aRT=aTorus.MinorRadius(); | |
4375 | dR=aRC-aRT; | |
4376 | if (dR<0.) { | |
4377 | dR=-dR; | |
7fd59977 | 4378 | } |
0fc4f2e2 P |
4379 | // |
4380 | if (dR<aPC) { | |
4381 | aTolTang=0.1*aTolTang; | |
4382 | } | |
4383 | } | |
4384 | } | |
4385 | //modified by NIZNHY-PKV Tue Feb 15 10:15:31 2011f | |
4386 | //======================================================================= | |
4387 | //function : SortTypes | |
4388 | //purpose : | |
4389 | //======================================================================= | |
4390 | Standard_Boolean SortTypes(const GeomAbs_SurfaceType aType1, | |
4391 | const GeomAbs_SurfaceType aType2) | |
4392 | { | |
4393 | Standard_Boolean bRet; | |
4394 | Standard_Integer aI1, aI2; | |
4395 | // | |
4396 | bRet=Standard_False; | |
4397 | // | |
4398 | aI1=IndexType(aType1); | |
4399 | aI2=IndexType(aType2); | |
4400 | if (aI1<aI2){ | |
4401 | bRet=!bRet; | |
4402 | } | |
4403 | return bRet; | |
4404 | } | |
4405 | //======================================================================= | |
4406 | //function : IndexType | |
4407 | //purpose : | |
4408 | //======================================================================= | |
4409 | Standard_Integer IndexType(const GeomAbs_SurfaceType aType) | |
4410 | { | |
4411 | Standard_Integer aIndex; | |
4412 | // | |
4413 | aIndex=11; | |
4414 | // | |
4415 | if (aType==GeomAbs_Plane) { | |
4416 | aIndex=0; | |
7fd59977 | 4417 | } |
0fc4f2e2 P |
4418 | else if (aType==GeomAbs_Cylinder) { |
4419 | aIndex=1; | |
4420 | } | |
4421 | else if (aType==GeomAbs_Cone) { | |
4422 | aIndex=2; | |
4423 | } | |
4424 | else if (aType==GeomAbs_Sphere) { | |
4425 | aIndex=3; | |
4426 | } | |
4427 | else if (aType==GeomAbs_Torus) { | |
4428 | aIndex=4; | |
4429 | } | |
4430 | else if (aType==GeomAbs_BezierSurface) { | |
4431 | aIndex=5; | |
4432 | } | |
4433 | else if (aType==GeomAbs_BSplineSurface) { | |
4434 | aIndex=6; | |
4435 | } | |
4436 | else if (aType==GeomAbs_SurfaceOfRevolution) { | |
4437 | aIndex=7; | |
4438 | } | |
4439 | else if (aType==GeomAbs_SurfaceOfExtrusion) { | |
4440 | aIndex=8; | |
4441 | } | |
4442 | else if (aType==GeomAbs_OffsetSurface) { | |
4443 | aIndex=9; | |
4444 | } | |
4445 | else if (aType==GeomAbs_OtherSurface) { | |
4446 | aIndex=10; | |
4447 | } | |
4448 | return aIndex; | |
7fd59977 | 4449 | } |
0fc4f2e2 | 4450 | //modified by NIZNHY-PKV Tue Feb 15 10:15:39 2011t |