| b311480e |
1 | // Copyright (c) 1999-2012 OPEN CASCADE SAS |
| 2 | // |
| 3 | // The content of this file is subject to the Open CASCADE Technology Public |
| 4 | // License Version 6.5 (the "License"). You may not use the content of this file |
| 5 | // except in compliance with the License. Please obtain a copy of the License |
| 6 | // at http://www.opencascade.org and read it completely before using this file. |
| 7 | // |
| 8 | // The Initial Developer of the Original Code is Open CASCADE S.A.S., having its |
| 9 | // main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France. |
| 10 | // |
| 11 | // The Original Code and all software distributed under the License is |
| 12 | // distributed on an "AS IS" basis, without warranty of any kind, and the |
| 13 | // Initial Developer hereby disclaims all such warranties, including without |
| 14 | // limitation, any warranties of merchantability, fitness for a particular |
| 15 | // purpose or non-infringement. Please see the License for the specific terms |
| 16 | // and conditions governing the rights and limitations under the License. |
| 17 | |
| 7fd59977 |
18 | #include <IGESAppli_ReadWriteModule.ixx> |
| 19 | #include <Interface_Macros.hxx> |
| 20 | |
| 21 | #include <IGESAppli_DrilledHole.hxx> |
| 22 | #include <IGESAppli_ElementResults.hxx> |
| 23 | #include <IGESAppli_FiniteElement.hxx> |
| 24 | #include <IGESAppli_Flow.hxx> |
| 25 | #include <IGESAppli_FlowLineSpec.hxx> |
| 26 | #include <IGESAppli_LevelFunction.hxx> |
| 27 | #include <IGESAppli_LevelToPWBLayerMap.hxx> |
| 28 | #include <IGESAppli_LineWidening.hxx> |
| 29 | #include <IGESAppli_NodalConstraint.hxx> |
| 30 | #include <IGESAppli_NodalDisplAndRot.hxx> |
| 31 | #include <IGESAppli_NodalResults.hxx> |
| 32 | #include <IGESAppli_Node.hxx> |
| 33 | #include <IGESAppli_PWBArtworkStackup.hxx> |
| 34 | #include <IGESAppli_PWBDrilledHole.hxx> |
| 35 | #include <IGESAppli_PartNumber.hxx> |
| 36 | #include <IGESAppli_PinNumber.hxx> |
| 37 | #include <IGESAppli_PipingFlow.hxx> |
| 38 | #include <IGESAppli_ReferenceDesignator.hxx> |
| 39 | #include <IGESAppli_RegionRestriction.hxx> |
| 40 | |
| 41 | #include <IGESAppli_ToolDrilledHole.hxx> |
| 42 | #include <IGESAppli_ToolElementResults.hxx> |
| 43 | #include <IGESAppli_ToolFiniteElement.hxx> |
| 44 | #include <IGESAppli_ToolFlow.hxx> |
| 45 | #include <IGESAppli_ToolFlowLineSpec.hxx> |
| 46 | #include <IGESAppli_ToolLevelFunction.hxx> |
| 47 | #include <IGESAppli_ToolLevelToPWBLayerMap.hxx> |
| 48 | #include <IGESAppli_ToolLineWidening.hxx> |
| 49 | #include <IGESAppli_ToolNodalConstraint.hxx> |
| 50 | #include <IGESAppli_ToolNodalDisplAndRot.hxx> |
| 51 | #include <IGESAppli_ToolNodalResults.hxx> |
| 52 | #include <IGESAppli_ToolNode.hxx> |
| 53 | #include <IGESAppli_ToolPWBArtworkStackup.hxx> |
| 54 | #include <IGESAppli_ToolPWBDrilledHole.hxx> |
| 55 | #include <IGESAppli_ToolPartNumber.hxx> |
| 56 | #include <IGESAppli_ToolPinNumber.hxx> |
| 57 | #include <IGESAppli_ToolPipingFlow.hxx> |
| 58 | #include <IGESAppli_ToolReferenceDesignator.hxx> |
| 59 | #include <IGESAppli_ToolRegionRestriction.hxx> |
| 60 | |
| 61 | |
| 62 | |
| 63 | // Each Module is attached to a Protocol : it must interprete Case Numbers |
| 64 | // (arguments <CN> of various methods) in accordance to values returned by |
| 65 | // the method TypeNumber from this Protocol |
| 66 | |
| 67 | |
| b311480e |
68 | IGESAppli_ReadWriteModule::IGESAppli_ReadWriteModule () { } |
| 7fd59977 |
69 | |
| 70 | |
| 71 | Standard_Integer IGESAppli_ReadWriteModule::CaseIGES |
| 72 | (const Standard_Integer typenum, const Standard_Integer formnum) const |
| 73 | { |
| 74 | switch (typenum) { |
| 75 | case 134 : return 12; |
| 76 | case 136 : return 3; |
| 77 | case 138 : return 10; |
| 78 | case 146 : return 11; |
| 79 | case 148 : return 2; |
| 80 | case 402 : |
| 81 | switch (formnum) { |
| 82 | case 18 : return 4; |
| 83 | case 20 : return 17; |
| 84 | default : break; |
| 85 | } |
| 86 | break; |
| 87 | case 406 : |
| 88 | switch (formnum) { |
| 89 | case 2 : return 19; |
| 90 | case 3 : return 6; |
| 91 | case 5 : return 8; |
| 92 | case 6 : return 1; |
| 93 | case 7 : return 18; |
| 94 | case 8 : return 16; |
| 95 | case 9 : return 15; |
| 96 | case 14 : return 5; |
| 97 | case 24 : return 7; |
| 98 | case 25 : return 13; |
| 99 | case 26 : return 14; |
| 100 | default : break; |
| 101 | } |
| 102 | break; |
| 103 | case 418 : return 9; |
| 104 | default : break; |
| 105 | } |
| 106 | return 0; |
| 107 | } |
| 108 | |
| 109 | |
| 110 | void IGESAppli_ReadWriteModule::ReadOwnParams |
| 111 | (const Standard_Integer CN, const Handle(IGESData_IGESEntity)& ent, |
| 112 | const Handle(IGESData_IGESReaderData)& IR, IGESData_ParamReader& PR) const |
| 113 | { |
| 114 | switch (CN) { |
| 115 | case 1 : { |
| 116 | DeclareAndCast(IGESAppli_DrilledHole,anent,ent); |
| 117 | if (anent.IsNull()) return; |
| 118 | IGESAppli_ToolDrilledHole tool; |
| 119 | tool.ReadOwnParams(anent,IR,PR); |
| 120 | } |
| 121 | break; |
| 122 | case 2 : { |
| 123 | DeclareAndCast(IGESAppli_ElementResults,anent,ent); |
| 124 | if (anent.IsNull()) return; |
| 125 | IGESAppli_ToolElementResults tool; |
| 126 | tool.ReadOwnParams(anent,IR,PR); |
| 127 | } |
| 128 | break; |
| 129 | case 3 : { |
| 130 | DeclareAndCast(IGESAppli_FiniteElement,anent,ent); |
| 131 | if (anent.IsNull()) return; |
| 132 | IGESAppli_ToolFiniteElement tool; |
| 133 | tool.ReadOwnParams(anent,IR,PR); |
| 134 | } |
| 135 | break; |
| 136 | case 4 : { |
| 137 | DeclareAndCast(IGESAppli_Flow,anent,ent); |
| 138 | if (anent.IsNull()) return; |
| 139 | IGESAppli_ToolFlow tool; |
| 140 | tool.ReadOwnParams(anent,IR,PR); |
| 141 | } |
| 142 | break; |
| 143 | case 5 : { |
| 144 | DeclareAndCast(IGESAppli_FlowLineSpec,anent,ent); |
| 145 | if (anent.IsNull()) return; |
| 146 | IGESAppli_ToolFlowLineSpec tool; |
| 147 | tool.ReadOwnParams(anent,IR,PR); |
| 148 | } |
| 149 | break; |
| 150 | case 6 : { |
| 151 | DeclareAndCast(IGESAppli_LevelFunction,anent,ent); |
| 152 | if (anent.IsNull()) return; |
| 153 | IGESAppli_ToolLevelFunction tool; |
| 154 | tool.ReadOwnParams(anent,IR,PR); |
| 155 | } |
| 156 | break; |
| 157 | case 7 : { |
| 158 | DeclareAndCast(IGESAppli_LevelToPWBLayerMap,anent,ent); |
| 159 | if (anent.IsNull()) return; |
| 160 | IGESAppli_ToolLevelToPWBLayerMap tool; |
| 161 | tool.ReadOwnParams(anent,IR,PR); |
| 162 | } |
| 163 | break; |
| 164 | case 8 : { |
| 165 | DeclareAndCast(IGESAppli_LineWidening,anent,ent); |
| 166 | if (anent.IsNull()) return; |
| 167 | IGESAppli_ToolLineWidening tool; |
| 168 | tool.ReadOwnParams(anent,IR,PR); |
| 169 | } |
| 170 | break; |
| 171 | case 9 : { |
| 172 | DeclareAndCast(IGESAppli_NodalConstraint,anent,ent); |
| 173 | if (anent.IsNull()) return; |
| 174 | IGESAppli_ToolNodalConstraint tool; |
| 175 | tool.ReadOwnParams(anent,IR,PR); |
| 176 | } |
| 177 | break; |
| 178 | case 10 : { |
| 179 | DeclareAndCast(IGESAppli_NodalDisplAndRot,anent,ent); |
| 180 | if (anent.IsNull()) return; |
| 181 | IGESAppli_ToolNodalDisplAndRot tool; |
| 182 | tool.ReadOwnParams(anent,IR,PR); |
| 183 | } |
| 184 | break; |
| 185 | case 11 : { |
| 186 | DeclareAndCast(IGESAppli_NodalResults,anent,ent); |
| 187 | if (anent.IsNull()) return; |
| 188 | IGESAppli_ToolNodalResults tool; |
| 189 | tool.ReadOwnParams(anent,IR,PR); |
| 190 | } |
| 191 | break; |
| 192 | case 12 : { |
| 193 | DeclareAndCast(IGESAppli_Node,anent,ent); |
| 194 | if (anent.IsNull()) return; |
| 195 | IGESAppli_ToolNode tool; |
| 196 | tool.ReadOwnParams(anent,IR,PR); |
| 197 | } |
| 198 | break; |
| 199 | case 13 : { |
| 200 | DeclareAndCast(IGESAppli_PWBArtworkStackup,anent,ent); |
| 201 | if (anent.IsNull()) return; |
| 202 | IGESAppli_ToolPWBArtworkStackup tool; |
| 203 | tool.ReadOwnParams(anent,IR,PR); |
| 204 | } |
| 205 | break; |
| 206 | case 14 : { |
| 207 | DeclareAndCast(IGESAppli_PWBDrilledHole,anent,ent); |
| 208 | if (anent.IsNull()) return; |
| 209 | IGESAppli_ToolPWBDrilledHole tool; |
| 210 | tool.ReadOwnParams(anent,IR,PR); |
| 211 | } |
| 212 | break; |
| 213 | case 15 : { |
| 214 | DeclareAndCast(IGESAppli_PartNumber,anent,ent); |
| 215 | if (anent.IsNull()) return; |
| 216 | IGESAppli_ToolPartNumber tool; |
| 217 | tool.ReadOwnParams(anent,IR,PR); |
| 218 | } |
| 219 | break; |
| 220 | case 16 : { |
| 221 | DeclareAndCast(IGESAppli_PinNumber,anent,ent); |
| 222 | if (anent.IsNull()) return; |
| 223 | IGESAppli_ToolPinNumber tool; |
| 224 | tool.ReadOwnParams(anent,IR,PR); |
| 225 | } |
| 226 | break; |
| 227 | case 17 : { |
| 228 | DeclareAndCast(IGESAppli_PipingFlow,anent,ent); |
| 229 | if (anent.IsNull()) return; |
| 230 | IGESAppli_ToolPipingFlow tool; |
| 231 | tool.ReadOwnParams(anent,IR,PR); |
| 232 | } |
| 233 | break; |
| 234 | case 18 : { |
| 235 | DeclareAndCast(IGESAppli_ReferenceDesignator,anent,ent); |
| 236 | if (anent.IsNull()) return; |
| 237 | IGESAppli_ToolReferenceDesignator tool; |
| 238 | tool.ReadOwnParams(anent,IR,PR); |
| 239 | } |
| 240 | break; |
| 241 | case 19 : { |
| 242 | DeclareAndCast(IGESAppli_RegionRestriction,anent,ent); |
| 243 | if (anent.IsNull()) return; |
| 244 | IGESAppli_ToolRegionRestriction tool; |
| 245 | tool.ReadOwnParams(anent,IR,PR); |
| 246 | } |
| 247 | break; |
| 248 | default : break; |
| 249 | } |
| 250 | } |
| 251 | |
| 252 | |
| 253 | void IGESAppli_ReadWriteModule::WriteOwnParams |
| 254 | (const Standard_Integer CN, const Handle(IGESData_IGESEntity)& ent, |
| 255 | IGESData_IGESWriter& IW) const |
| 256 | { |
| 257 | switch (CN) { |
| 258 | case 1 : { |
| 259 | DeclareAndCast(IGESAppli_DrilledHole,anent,ent); |
| 260 | if (anent.IsNull()) return; |
| 261 | IGESAppli_ToolDrilledHole tool; |
| 262 | tool.WriteOwnParams(anent,IW); |
| 263 | } |
| 264 | break; |
| 265 | case 2 : { |
| 266 | DeclareAndCast(IGESAppli_ElementResults,anent,ent); |
| 267 | if (anent.IsNull()) return; |
| 268 | IGESAppli_ToolElementResults tool; |
| 269 | tool.WriteOwnParams(anent,IW); |
| 270 | } |
| 271 | break; |
| 272 | case 3 : { |
| 273 | DeclareAndCast(IGESAppli_FiniteElement,anent,ent); |
| 274 | if (anent.IsNull()) return; |
| 275 | IGESAppli_ToolFiniteElement tool; |
| 276 | tool.WriteOwnParams(anent,IW); |
| 277 | } |
| 278 | break; |
| 279 | case 4 : { |
| 280 | DeclareAndCast(IGESAppli_Flow,anent,ent); |
| 281 | if (anent.IsNull()) return; |
| 282 | IGESAppli_ToolFlow tool; |
| 283 | tool.WriteOwnParams(anent,IW); |
| 284 | } |
| 285 | break; |
| 286 | case 5 : { |
| 287 | DeclareAndCast(IGESAppli_FlowLineSpec,anent,ent); |
| 288 | if (anent.IsNull()) return; |
| 289 | IGESAppli_ToolFlowLineSpec tool; |
| 290 | tool.WriteOwnParams(anent,IW); |
| 291 | } |
| 292 | break; |
| 293 | case 6 : { |
| 294 | DeclareAndCast(IGESAppli_LevelFunction,anent,ent); |
| 295 | if (anent.IsNull()) return; |
| 296 | IGESAppli_ToolLevelFunction tool; |
| 297 | tool.WriteOwnParams(anent,IW); |
| 298 | } |
| 299 | break; |
| 300 | case 7 : { |
| 301 | DeclareAndCast(IGESAppli_LevelToPWBLayerMap,anent,ent); |
| 302 | if (anent.IsNull()) return; |
| 303 | IGESAppli_ToolLevelToPWBLayerMap tool; |
| 304 | tool.WriteOwnParams(anent,IW); |
| 305 | } |
| 306 | break; |
| 307 | case 8 : { |
| 308 | DeclareAndCast(IGESAppli_LineWidening,anent,ent); |
| 309 | if (anent.IsNull()) return; |
| 310 | IGESAppli_ToolLineWidening tool; |
| 311 | tool.WriteOwnParams(anent,IW); |
| 312 | } |
| 313 | break; |
| 314 | case 9 : { |
| 315 | DeclareAndCast(IGESAppli_NodalConstraint,anent,ent); |
| 316 | if (anent.IsNull()) return; |
| 317 | IGESAppli_ToolNodalConstraint tool; |
| 318 | tool.WriteOwnParams(anent,IW); |
| 319 | } |
| 320 | break; |
| 321 | case 10 : { |
| 322 | DeclareAndCast(IGESAppli_NodalDisplAndRot,anent,ent); |
| 323 | if (anent.IsNull()) return; |
| 324 | IGESAppli_ToolNodalDisplAndRot tool; |
| 325 | tool.WriteOwnParams(anent,IW); |
| 326 | } |
| 327 | break; |
| 328 | case 11 : { |
| 329 | DeclareAndCast(IGESAppli_NodalResults,anent,ent); |
| 330 | if (anent.IsNull()) return; |
| 331 | IGESAppli_ToolNodalResults tool; |
| 332 | tool.WriteOwnParams(anent,IW); |
| 333 | } |
| 334 | break; |
| 335 | case 12 : { |
| 336 | DeclareAndCast(IGESAppli_Node,anent,ent); |
| 337 | if (anent.IsNull()) return; |
| 338 | IGESAppli_ToolNode tool; |
| 339 | tool.WriteOwnParams(anent,IW); |
| 340 | } |
| 341 | break; |
| 342 | case 13 : { |
| 343 | DeclareAndCast(IGESAppli_PWBArtworkStackup,anent,ent); |
| 344 | if (anent.IsNull()) return; |
| 345 | IGESAppli_ToolPWBArtworkStackup tool; |
| 346 | tool.WriteOwnParams(anent,IW); |
| 347 | } |
| 348 | break; |
| 349 | case 14 : { |
| 350 | DeclareAndCast(IGESAppli_PWBDrilledHole,anent,ent); |
| 351 | if (anent.IsNull()) return; |
| 352 | IGESAppli_ToolPWBDrilledHole tool; |
| 353 | tool.WriteOwnParams(anent,IW); |
| 354 | } |
| 355 | break; |
| 356 | case 15 : { |
| 357 | DeclareAndCast(IGESAppli_PartNumber,anent,ent); |
| 358 | if (anent.IsNull()) return; |
| 359 | IGESAppli_ToolPartNumber tool; |
| 360 | tool.WriteOwnParams(anent,IW); |
| 361 | } |
| 362 | break; |
| 363 | case 16 : { |
| 364 | DeclareAndCast(IGESAppli_PinNumber,anent,ent); |
| 365 | if (anent.IsNull()) return; |
| 366 | IGESAppli_ToolPinNumber tool; |
| 367 | tool.WriteOwnParams(anent,IW); |
| 368 | } |
| 369 | break; |
| 370 | case 17 : { |
| 371 | DeclareAndCast(IGESAppli_PipingFlow,anent,ent); |
| 372 | if (anent.IsNull()) return; |
| 373 | IGESAppli_ToolPipingFlow tool; |
| 374 | tool.WriteOwnParams(anent,IW); |
| 375 | } |
| 376 | break; |
| 377 | case 18 : { |
| 378 | DeclareAndCast(IGESAppli_ReferenceDesignator,anent,ent); |
| 379 | if (anent.IsNull()) return; |
| 380 | IGESAppli_ToolReferenceDesignator tool; |
| 381 | tool.WriteOwnParams(anent,IW); |
| 382 | } |
| 383 | break; |
| 384 | case 19 : { |
| 385 | DeclareAndCast(IGESAppli_RegionRestriction,anent,ent); |
| 386 | if (anent.IsNull()) return; |
| 387 | IGESAppli_ToolRegionRestriction tool; |
| 388 | tool.WriteOwnParams(anent,IW); |
| 389 | } |
| 390 | break; |
| 391 | default : break; |
| 392 | } |
| 393 | } |
projects / occt.git / blame