| d5f74e42 |
1 | # Copyright (c) 2013-2014 OPEN CASCADE SAS |
| 40093367 |
2 | # |
| 973c2be1 |
3 | # This file is part of Open CASCADE Technology software library. |
| 40093367 |
4 | # |
| d5f74e42 |
5 | # This library is free software; you can redistribute it and/or modify it under |
| 6 | # the terms of the GNU Lesser General Public License version 2.1 as published |
| 973c2be1 |
7 | # by the Free Software Foundation, with special exception defined in the file |
| 8 | # OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT |
| 9 | # distribution for complete text of the license and disclaimer of any warranty. |
| 40093367 |
10 | # |
| 973c2be1 |
11 | # Alternatively, this file may be used under the terms of Open CASCADE |
| 12 | # commercial license or contractual agreement. |
| 40093367 |
13 | |
| 14 | ############################################################################ |
| 15 | # This file defines scripts for execution of OCCT tests. |
| 16 | # It should be loaded automatically when DRAW is started, and provides |
| 351bbcba |
17 | # top-level commands starting with 'test'. Type 'help test' to get their |
| 18 | # synopsys. |
| 40093367 |
19 | # See OCCT Tests User Guide for description of the test system. |
| 20 | # |
| 21 | # Note: procedures with names starting with underscore are for internal use |
| 22 | # inside the test system. |
| 23 | ############################################################################ |
| 24 | |
| 25 | # Default verbose level for command _run_test |
| 26 | set _tests_verbose 0 |
| 27 | |
| 28 | # regexp for parsing test case results in summary log |
| 29 | set _test_case_regexp {^CASE\s+([\w.-]+)\s+([\w.-]+)\s+([\w.-]+)\s*:\s*([\w]+)(.*)} |
| 30 | |
| 31 | # Basic command to run indicated test case in DRAW |
| b725d7c5 |
32 | help test { |
| 33 | Run specified test case |
| 433673e0 |
34 | Use: test group grid casename [options...] |
| 35 | Allowed options are: |
| 36 | -echo: all commands and results are echoed immediately, |
| 37 | but log is not saved and summary is not produced |
| 38 | It is also possible to use "1" instead of "-echo" |
| 39 | If echo is OFF, log is stored in memory and only summary |
| 40 | is output (the log can be obtained with command "dlog get") |
| 41 | -outfile filename: set log file (should be non-existing), |
| 42 | it is possible to save log file in text file or |
| 43 | in html file(with snapshot), for that "filename" |
| 44 | should have ".html" extension |
| 45 | -overwrite: force writing log in existing file |
| 46 | -beep: play sound signal at the end of the test |
| 5fd3308a |
47 | -errors: show all lines from the log report that are recognized as errors |
| 48 | This key will be ignored if the "-echo" key is already set. |
| b725d7c5 |
49 | } |
| 433673e0 |
50 | proc test {group grid casename {args {}}} { |
| 51 | # set default values of arguments |
| 52 | set echo 0 |
| 5fd3308a |
53 | set errors 0 |
| 433673e0 |
54 | set logfile "" |
| 55 | set overwrite 0 |
| 56 | set signal 0 |
| 57 | |
| 40093367 |
58 | # get test case paths (will raise error if input is invalid) |
| 59 | _get_test $group $grid $casename dir gridname casefile |
| 60 | |
| 433673e0 |
61 | # check arguments |
| 62 | for {set narg 0} {$narg < [llength $args]} {incr narg} { |
| 63 | set arg [lindex $args $narg] |
| 433673e0 |
64 | # if echo specified as "-echo", convert it to bool |
| 65 | if { $arg == "-echo" || $arg == "1" } { |
| 6d368502 |
66 | set echo t |
| 67 | continue |
| 433673e0 |
68 | } |
| 69 | |
| 70 | # output log file |
| 71 | if { $arg == "-outfile" } { |
| 6d368502 |
72 | incr narg |
| 73 | if { $narg < [llength $args] && ! [regexp {^-} [lindex $args $narg]] } { |
| 74 | set logfile [lindex $args $narg] |
| 75 | } else { |
| 76 | error "Option -outfile requires argument" |
| 77 | } |
| 78 | continue |
| 433673e0 |
79 | } |
| 80 | |
| 81 | # allow overwrite existing log |
| 82 | if { $arg == "-overwrite" } { |
| 6d368502 |
83 | set overwrite 1 |
| 84 | continue |
| 433673e0 |
85 | } |
| 86 | |
| 87 | # sound signal at the end of the test |
| 88 | if { $arg == "-beep" } { |
| 6d368502 |
89 | set signal t |
| 90 | continue |
| 433673e0 |
91 | } |
| 92 | |
| 5fd3308a |
93 | # if errors specified as "-errors", convert it to bool |
| 94 | if { $arg == "-errors" } { |
| 6d368502 |
95 | set errors t |
| 96 | continue |
| 5fd3308a |
97 | } |
| 98 | |
| 433673e0 |
99 | # unsupported option |
| 100 | error "Error: unsupported option \"$arg\"" |
| 101 | } |
| 40093367 |
102 | # run test |
| c97067ad |
103 | uplevel _run_test $dir $group $gridname $casefile $echo |
| 40093367 |
104 | |
| 105 | # check log |
| 433673e0 |
106 | if { !$echo } { |
| 5fd3308a |
107 | _check_log $dir $group $gridname $casename $errors [dlog get] summary html_log |
| 433673e0 |
108 | |
| 109 | # create log file |
| 110 | if { ! $overwrite && [file isfile $logfile] } { |
| 111 | error "Error: Specified log file \"$logfile\" exists; please remove it before running test or use -overwrite option" |
| 112 | } |
| 113 | if {$logfile != ""} { |
| 6d368502 |
114 | if {[file extension $logfile] == ".html"} { |
| 115 | if {[regexp {vdump ([^\s\n]+)} $html_log dump snapshot]} { |
| 116 | catch {file copy -force $snapshot [file rootname $logfile][file extension $snapshot]} |
| 117 | } |
| 118 | _log_html $logfile $html_log "Test $group $grid $casename" |
| 119 | } else { |
| 120 | _log_save $logfile "[dlog get]\n$summary" "Test $group $grid $casename" |
| 433673e0 |
121 | } |
| 433673e0 |
122 | } |
| 5df3a117 |
123 | } |
| 40093367 |
124 | |
| 433673e0 |
125 | # play sound signal at the end of test |
| 126 | if {$signal} { |
| 6d368502 |
127 | puts "\7\7\7\7" |
| 433673e0 |
128 | } |
| 40093367 |
129 | return |
| 130 | } |
| 131 | |
| 132 | # Basic command to run indicated test case in DRAW |
| b725d7c5 |
133 | help testgrid { |
| 134 | Run all tests, or specified group, or one grid |
| 87f42a3f |
135 | Use: testgrid [groupmask [gridmask [casemask]]] [options...] |
| b725d7c5 |
136 | Allowed options are: |
| 137 | -parallel N: run N parallel processes (default is number of CPUs, 0 to disable) |
| 9753e6de |
138 | -refresh N: save summary logs every N seconds (default 600, minimal 1, 0 to disable) |
| b725d7c5 |
139 | -outdir dirname: set log directory (should be empty or non-existing) |
| 140 | -overwrite: force writing logs in existing non-empty directory |
| 141 | -xml filename: write XML report for Jenkins (in JUnit-like format) |
| 433673e0 |
142 | -beep: play sound signal at the end of the tests |
| b502ddc1 |
143 | -regress dirname: re-run only a set of tests that have been detected as regressions on some previous run. |
| 144 | Here "dirname" is path to directory containing results of previous run. |
| 87f42a3f |
145 | Groups, grids, and test cases to be executed can be specified by list of file |
| 146 | masks, separated by spaces or comma; default is all (*). |
| 40093367 |
147 | } |
| b725d7c5 |
148 | proc testgrid {args} { |
| 40093367 |
149 | global env tcl_platform _tests_verbose |
| 150 | |
| 151 | ###################################################### |
| 152 | # check arguments |
| 153 | ###################################################### |
| 154 | |
| 155 | # check that environment variable defining paths to test scripts is defined |
| 156 | if { ! [info exists env(CSF_TestScriptsPath)] || |
| 6d368502 |
157 | [llength $env(CSF_TestScriptsPath)] <= 0 } { |
| 40093367 |
158 | error "Error: Environment variable CSF_TestScriptsPath is not defined" |
| 159 | } |
| 160 | |
| 161 | # treat options |
| b725d7c5 |
162 | set parallel [_get_nb_cpus] |
| 40093367 |
163 | set refresh 60 |
| b725d7c5 |
164 | set logdir "" |
| 40093367 |
165 | set overwrite 0 |
| 166 | set xmlfile "" |
| 433673e0 |
167 | set signal 0 |
| b502ddc1 |
168 | set regress 0 |
| 169 | set prev_logdir "" |
| 40093367 |
170 | for {set narg 0} {$narg < [llength $args]} {incr narg} { |
| 6d368502 |
171 | set arg [lindex $args $narg] |
| 172 | |
| 173 | # parallel execution |
| 174 | if { $arg == "-parallel" } { |
| 175 | incr narg |
| 176 | if { $narg < [llength $args] && ! [regexp {^-} [lindex $args $narg]] } { |
| 177 | set parallel [expr [lindex $args $narg]] |
| 178 | } else { |
| 179 | error "Option -parallel requires argument" |
| 180 | } |
| 181 | continue |
| 182 | } |
| 183 | |
| 184 | # refresh logs time |
| 185 | if { $arg == "-refresh" } { |
| 186 | incr narg |
| 187 | if { $narg < [llength $args] && ! [regexp {^-} [lindex $args $narg]] } { |
| 188 | set refresh [expr [lindex $args $narg]] |
| 189 | } else { |
| 190 | error "Option -refresh requires argument" |
| 191 | } |
| 192 | continue |
| 193 | } |
| 194 | |
| 195 | # output directory |
| 196 | if { $arg == "-outdir" } { |
| 197 | incr narg |
| 198 | if { $narg < [llength $args] && ! [regexp {^-} [lindex $args $narg]] } { |
| 199 | set logdir [lindex $args $narg] |
| 200 | } else { |
| 201 | error "Option -outdir requires argument" |
| 202 | } |
| 203 | continue |
| 204 | } |
| 205 | |
| 206 | # allow overwrite logs |
| 207 | if { $arg == "-overwrite" } { |
| 208 | set overwrite 1 |
| 209 | continue |
| 210 | } |
| 211 | |
| 212 | # refresh logs time |
| 213 | if { $arg == "-xml" } { |
| 214 | incr narg |
| 215 | if { $narg < [llength $args] && ! [regexp {^-} [lindex $args $narg]] } { |
| 216 | set xmlfile [lindex $args $narg] |
| 217 | } |
| 218 | if { $xmlfile == "" } { |
| 219 | set xmlfile TESTS-summary.xml |
| 220 | } |
| 221 | continue |
| 222 | } |
| 223 | |
| 224 | # sound signal at the end of the test |
| 225 | if { $arg == "-beep" } { |
| 226 | set signal t |
| 227 | continue |
| 228 | } |
| 229 | |
| b502ddc1 |
230 | # re-run only a set of tests that have been detected as regressions on some previous run |
| 231 | if { $arg == "-regress" } { |
| 232 | incr narg |
| 233 | if { $narg < [llength $args] && ! [regexp {^-} [lindex $args $narg]] } { |
| 234 | set prev_logdir [lindex $args $narg] |
| 235 | set regress 1 |
| 236 | } else { |
| 237 | error "Option -regress requires argument" |
| 238 | } |
| 239 | continue |
| 240 | } |
| 241 | |
| 6d368502 |
242 | # unsupported option |
| 243 | if { [regexp {^-} $arg] } { |
| 244 | error "Error: unsupported option \"$arg\"" |
| 245 | } |
| 246 | |
| 247 | # treat arguments not recognized as options as group and grid names |
| 248 | if { ! [info exists groupmask] } { |
| 249 | set groupmask [split $arg ,] |
| 250 | } elseif { ! [info exists gridmask] } { |
| 251 | set gridmask [split $arg ,] |
| 252 | } elseif { ! [info exists casemask] } { |
| 253 | set casemask [split $arg ,] |
| 254 | } else { |
| 255 | error "Error: cannot interpret argument $narg ($arg)" |
| 256 | } |
| 40093367 |
257 | } |
| 258 | |
| 259 | # check that target log directory is empty or does not exist |
| 260 | set logdir [file normalize [string trim $logdir]] |
| b502ddc1 |
261 | set prev_logdir [file normalize [string trim $prev_logdir]] |
| 40093367 |
262 | if { $logdir == "" } { |
| 6d368502 |
263 | # if specified logdir is empty string, generate unique name like |
| ffc26091 |
264 | # results/<branch>_<timestamp> |
| 265 | set prefix "" |
| b725d7c5 |
266 | if { ! [catch {exec git branch} gitout] && |
| b502ddc1 |
267 | [regexp {[*] ([\w-]+)} $gitout res branch] } { |
| ffc26091 |
268 | set prefix "${branch}_" |
| b725d7c5 |
269 | } |
| 6d368502 |
270 | set logdir "results/${prefix}[clock format [clock seconds] -format {%Y-%m-%dT%H%M}]" |
| 096ef695 |
271 | |
| 6d368502 |
272 | set logdir [file normalize $logdir] |
| 40093367 |
273 | } |
| 274 | if { [file isdirectory $logdir] && ! $overwrite && ! [catch {glob -directory $logdir *}] } { |
| 6d368502 |
275 | error "Error: Specified log directory \"$logdir\" is not empty; please clean it before running tests" |
| 40093367 |
276 | } |
| 277 | if { [catch {file mkdir $logdir}] || ! [file writable $logdir] } { |
| 6d368502 |
278 | error "Error: Cannot create directory \"$logdir\", or it is not writable" |
| 40093367 |
279 | } |
| 280 | |
| 87f42a3f |
281 | # masks for search of test groups, grids, and cases |
| 282 | if { ! [info exists groupmask] } { set groupmask * } |
| 283 | if { ! [info exists gridmask ] } { set gridmask * } |
| 284 | if { ! [info exists casemask ] } { set casemask * } |
| 285 | |
| b502ddc1 |
286 | # Find test cases with FAILED and IMPROVEMENT statuses in previous run |
| 287 | # if option "regress" is given |
| 288 | set rerun_group_grid_case {} |
| 289 | |
| 290 | if { ${regress} > 0 } { |
| 291 | if { "${groupmask}" != "*"} { |
| 292 | lappend rerun_group_grid_case [list $groupmask $gridmask $casemask] |
| 293 | } |
| 294 | } else { |
| 295 | lappend rerun_group_grid_case [list $groupmask $gridmask $casemask] |
| 296 | } |
| 297 | |
| 298 | if { ${regress} > 0 } { |
| 299 | if { [file exists ${prev_logdir}/tests.log] } { |
| 300 | set fd [open ${prev_logdir}/tests.log] |
| 301 | while { [gets $fd line] >= 0 } { |
| 302 | if {[regexp {CASE ([^\s]+) ([^\s]+) ([^\s]+): FAILED} $line dump group grid casename] || |
| 303 | [regexp {CASE ([^\s]+) ([^\s]+) ([^\s]+): IMPROVEMENT} $line dump group grid casename]} { |
| 304 | lappend rerun_group_grid_case [list $group $grid $casename] |
| 305 | } |
| 306 | } |
| 307 | close $fd |
| 308 | } else { |
| 309 | error "Error: file ${prev_logdir}/tests.log is not found, check your input arguments!" |
| 310 | } |
| 311 | } |
| 312 | |
| 40093367 |
313 | ###################################################### |
| 314 | # prepare list of tests to be performed |
| 315 | ###################################################### |
| 316 | |
| 317 | # list of tests, each defined by a list of: |
| 318 | # test scripts directory |
| 319 | # group (subfolder) name |
| 320 | # grid (subfolder) name |
| 321 | # test case name |
| 322 | # path to test case file |
| 323 | set tests_list {} |
| 324 | |
| b502ddc1 |
325 | foreach group_grid_case ${rerun_group_grid_case} { |
| 326 | set groupmask [lindex $group_grid_case 0] |
| 327 | set gridmask [lindex $group_grid_case 1] |
| 328 | set casemask [lindex $group_grid_case 2] |
| 40093367 |
329 | |
| b502ddc1 |
330 | # iterate by all script paths |
| 331 | foreach dir [lsort -unique [_split_path $env(CSF_TestScriptsPath)]] { |
| 332 | # protection against empty paths |
| 333 | set dir [string trim $dir] |
| 334 | if { $dir == "" } { continue } |
| 40093367 |
335 | |
| b502ddc1 |
336 | if { $_tests_verbose > 0 } { _log_and_puts log "Examining tests directory $dir" } |
| 40093367 |
337 | |
| b502ddc1 |
338 | # check that directory exists |
| 339 | if { ! [file isdirectory $dir] } { |
| 340 | _log_and_puts log "Warning: directory $dir listed in CSF_TestScriptsPath does not exist, skipped" |
| 6d368502 |
341 | continue |
| 342 | } |
| 343 | |
| b502ddc1 |
344 | # search all directories in the current dir with specified mask |
| 345 | if [catch {glob -directory $dir -tail -types d {*}$groupmask} groups] { continue } |
| 6d368502 |
346 | |
| b502ddc1 |
347 | # iterate by groups |
| 348 | if { $_tests_verbose > 0 } { _log_and_puts log "Groups to be executed: $groups" } |
| 349 | foreach group [lsort -dictionary $groups] { |
| 350 | if { $_tests_verbose > 0 } { _log_and_puts log "Examining group directory $group" } |
| 6d368502 |
351 | |
| b502ddc1 |
352 | # file grids.list must exist: it defines sequence of grids in the group |
| 353 | if { ! [file exists $dir/$group/grids.list] } { |
| 354 | _log_and_puts log "Warning: directory $dir/$group does not contain file grids.list, skipped" |
| 6d368502 |
355 | continue |
| 356 | } |
| 357 | |
| b502ddc1 |
358 | # read grids.list file and make a list of grids to be executed |
| 359 | set gridlist {} |
| 360 | set fd [open $dir/$group/grids.list] |
| 361 | set nline 0 |
| 362 | while { [gets $fd line] >= 0 } { |
| 363 | incr nline |
| 6d368502 |
364 | |
| b502ddc1 |
365 | # skip comments and empty lines |
| 366 | if { [regexp "\[ \t\]*\#.*" $line] } { continue } |
| 367 | if { [string trim $line] == "" } { continue } |
| 6d368502 |
368 | |
| b502ddc1 |
369 | # get grid id and name |
| 370 | if { ! [regexp "^\(\[0-9\]+\)\[ \t\]*\(\[A-Za-z0-9_.-\]+\)\$" $line res gridid grid] } { |
| 371 | _log_and_puts log "Warning: cannot recognize line $nline in file $dir/$group/grids.list as \"gridid gridname\"; ignored" |
| 372 | continue |
| 87f42a3f |
373 | } |
| 6d368502 |
374 | |
| b502ddc1 |
375 | # check that grid fits into the specified mask |
| 376 | foreach mask $gridmask { |
| 377 | if { $mask == $gridid || [string match $mask $grid] } { |
| 378 | lappend gridlist $grid |
| 379 | } |
| 380 | } |
| 6d368502 |
381 | } |
| b502ddc1 |
382 | close $fd |
| 383 | |
| 384 | # iterate by all grids |
| 385 | foreach grid $gridlist { |
| 386 | |
| 387 | # check if this grid is aliased to another one |
| 388 | set griddir $dir/$group/$grid |
| 389 | if { [file exists $griddir/cases.list] } { |
| 390 | set fd [open $griddir/cases.list] |
| 391 | if { [gets $fd line] >= 0 } { |
| 392 | set griddir [file normalize $dir/$group/$grid/[string trim $line]] |
| 393 | } |
| 394 | close $fd |
| 395 | } |
| 6d368502 |
396 | |
| b502ddc1 |
397 | # check if grid directory actually exists |
| 398 | if { ! [file isdirectory $griddir] } { |
| 399 | _log_and_puts log "Error: tests directory for grid $grid ($griddir) is missing; skipped" |
| 6d368502 |
400 | continue |
| 87f42a3f |
401 | } |
| 40093367 |
402 | |
| b502ddc1 |
403 | # create directory for logging test results |
| 404 | if { $logdir != "" } { file mkdir $logdir/$group/$grid } |
| 405 | |
| 406 | # iterate by all tests in the grid directory |
| 407 | if { [catch {glob -directory $griddir -type f {*}$casemask} testfiles] } { continue } |
| 408 | foreach casefile [lsort -dictionary $testfiles] { |
| 409 | # filter out files with reserved names |
| 410 | set casename [file tail $casefile] |
| 411 | if { $casename == "begin" || $casename == "end" || |
| 412 | $casename == "parse.rules" } { |
| 413 | continue |
| 414 | } |
| 415 | |
| 416 | lappend tests_list [list $dir $group $grid $casename $casefile] |
| 417 | } |
| 6d368502 |
418 | } |
| 419 | } |
| 420 | } |
| 40093367 |
421 | } |
| 422 | if { [llength $tests_list] < 1 } { |
| b502ddc1 |
423 | error "Error: no tests are found, check your input arguments and variable CSF_TestScriptsPath!" |
| 433673e0 |
424 | } else { |
| 6d368502 |
425 | puts "Running tests (total [llength $tests_list] test cases)..." |
| 40093367 |
426 | } |
| 427 | |
| 428 | ###################################################### |
| 429 | # run tests |
| 430 | ###################################################### |
| 431 | |
| 432 | # log command arguments and environment |
| 9753e6de |
433 | lappend log "Command: testgrid $args" |
| 434 | lappend log "Host: [info hostname]" |
| 435 | lappend log "Started on: [clock format [clock seconds] -format {%Y-%m-%d %H:%M:%S}]" |
| 436 | catch {lappend log "DRAW build:\n[dversion]" } |
| 437 | lappend log "Environment:" |
| 8a262fa1 |
438 | foreach envar [lsort [array names env]] { |
| 6d368502 |
439 | lappend log "$envar=\"$env($envar)\"" |
| 40093367 |
440 | } |
| 9753e6de |
441 | lappend log "" |
| 40093367 |
442 | |
| 443 | set refresh_timer [clock seconds] |
| 444 | uplevel dchrono _timer reset |
| 445 | uplevel dchrono _timer start |
| 446 | |
| 447 | # if parallel execution is requested, allocate thread pool |
| 448 | if { $parallel > 0 } { |
| 6d368502 |
449 | if { ! [info exists tcl_platform(threaded)] || [catch {package require Thread}] } { |
| 450 | _log_and_puts log "Warning: Tcl package Thread is not available, running in sequential mode" |
| 451 | set parallel 0 |
| 452 | } else { |
| 453 | set worker [tpool::create -minworkers $parallel -maxworkers $parallel] |
| 454 | # suspend the pool until all jobs are posted, to prevent blocking of the process |
| 455 | # of starting / processing jobs by running threads |
| 456 | catch {tpool::suspend $worker} |
| 457 | if { $_tests_verbose > 0 } { _log_and_puts log "Executing tests in (up to) $parallel threads" } |
| 9753e6de |
458 | # limit number of jobs in the queue by reasonable value |
| 459 | # to prevent slowdown due to unnecessary queue processing |
| 460 | set nbpooled 0 |
| 461 | set nbpooled_max [expr 10 * $parallel] |
| 462 | set nbpooled_ok [expr 5 * $parallel] |
| 6d368502 |
463 | } |
| 40093367 |
464 | } |
| 465 | |
| 466 | # start test cases |
| 8a262fa1 |
467 | set userbreak 0 |
| 40093367 |
468 | foreach test_def $tests_list { |
| 8a262fa1 |
469 | # check for user break |
| 9753e6de |
470 | if { $userbreak || "[info commands dbreak]" == "dbreak" && [catch dbreak] } { |
| 8a262fa1 |
471 | set userbreak 1 |
| 472 | break |
| 473 | } |
| 474 | |
| 6d368502 |
475 | set dir [lindex $test_def 0] |
| 476 | set group [lindex $test_def 1] |
| 477 | set grid [lindex $test_def 2] |
| 478 | set casename [lindex $test_def 3] |
| 479 | set casefile [lindex $test_def 4] |
| 480 | |
| 481 | # command to set tests for generation of image in results directory |
| 482 | set imgdir_cmd "" |
| 483 | if { $logdir != "" } { set imgdir_cmd "set imagedir $logdir/$group/$grid" } |
| 484 | |
| 485 | # prepare command file for running test case in separate instance of DRAW |
| 486 | set fd_cmd [open $logdir/$group/$grid/${casename}.tcl w] |
| 487 | puts $fd_cmd "$imgdir_cmd" |
| 488 | puts $fd_cmd "set test_image $casename" |
| 489 | puts $fd_cmd "_run_test $dir $group $grid $casefile t" |
| 490 | |
| 491 | # use dlog command to obtain complete output of the test when it is absent (i.e. since OCCT 6.6.0) |
| 492 | # note: this is not needed if echo is set to 1 in call to _run_test above |
| 493 | if { ! [catch {dlog get}] } { |
| 494 | puts $fd_cmd "puts \[dlog get\]" |
| 495 | } else { |
| 496 | # else try to use old-style QA_ variables to get more output... |
| 497 | set env(QA_DUMP) 1 |
| 498 | set env(QA_DUP) 1 |
| 499 | set env(QA_print_command) 1 |
| 500 | } |
| 501 | |
| 502 | # final 'exit' is needed when running on Linux under VirtualGl |
| 503 | puts $fd_cmd "exit" |
| 504 | close $fd_cmd |
| 8418c617 |
505 | |
| 506 | # commant to run DRAW with a command file; |
| 507 | # note that empty string is passed as standard input to avoid possible |
| 508 | # hang-ups due to waiting for stdin of the launching process |
| 6d368502 |
509 | set command "exec <<{} DRAWEXE -f $logdir/$group/$grid/${casename}.tcl" |
| 510 | |
| 511 | # alternative method to run without temporary file; disabled as it needs too many backslashes |
| 512 | # else { |
| 513 | # set command "exec <<\"\" DRAWEXE -c $imgdir_cmd\\\; set test_image $casename\\\; \ |
| 514 | # _run_test $dir $group $grid $casefile\\\; \ |
| 515 | # puts \\\[dlog get\\\]\\\; exit" |
| 516 | # } |
| 517 | |
| 518 | # run test case, either in parallel or sequentially |
| 519 | if { $parallel > 0 } { |
| 520 | # parallel execution |
| 521 | set job [tpool::post -nowait $worker "catch \"$command\" output; return \$output"] |
| 522 | set job_def($job) [list $logdir $dir $group $grid $casename] |
| 9753e6de |
523 | incr nbpooled |
| 524 | if { $nbpooled > $nbpooled_max } { |
| 525 | _testgrid_process_jobs $worker $nbpooled_ok |
| 526 | } |
| 6d368502 |
527 | } else { |
| 528 | # sequential execution |
| 529 | catch {eval $command} output |
| 530 | _log_test_case $output $logdir $dir $group $grid $casename log |
| 531 | |
| 532 | # update summary log with requested period |
| 533 | if { $logdir != "" && $refresh > 0 && [expr [clock seconds] - $refresh_timer > $refresh] } { |
| 534 | # update and dump summary |
| 535 | _log_summarize $logdir $log |
| 536 | set refresh_timer [clock seconds] |
| 537 | } |
| 538 | } |
| 40093367 |
539 | } |
| 540 | |
| 541 | # get results of started threads |
| 542 | if { $parallel > 0 } { |
| 9753e6de |
543 | _testgrid_process_jobs $worker |
| 6d368502 |
544 | # release thread pool |
| 9753e6de |
545 | if { $nbpooled > 0 } { |
| 6d368502 |
546 | tpool::cancel $worker [array names job_def] |
| 9753e6de |
547 | } |
| 548 | catch {tpool::resume $worker} |
| 6d368502 |
549 | tpool::release $worker |
| 40093367 |
550 | } |
| 551 | |
| 552 | uplevel dchrono _timer stop |
| 553 | set time [lindex [split [uplevel dchrono _timer show] "\n"] 0] |
| 554 | |
| 8a262fa1 |
555 | if { $userbreak } { |
| 9753e6de |
556 | _log_and_puts log "*********** Stopped by user break ***********" |
| 8a262fa1 |
557 | set time "${time} \nNote: the process is not finished, stopped by user break!" |
| 558 | } |
| 559 | |
| 40093367 |
560 | ###################################################### |
| 561 | # output summary logs and exit |
| 562 | ###################################################### |
| 563 | |
| 564 | _log_summarize $logdir $log $time |
| 565 | if { $logdir != "" } { |
| 6d368502 |
566 | puts "Detailed logs are saved in $logdir" |
| 40093367 |
567 | } |
| 568 | if { $logdir != "" && $xmlfile != "" } { |
| 6d368502 |
569 | # XML output file is assumed relative to log dir unless it is absolute |
| 570 | if { [ file pathtype $xmlfile] == "relative" } { |
| 571 | set xmlfile [file normalize $logdir/$xmlfile] |
| 572 | } |
| 573 | _log_xml_summary $logdir $xmlfile $log 0 |
| 574 | puts "XML summary is saved to $xmlfile" |
| 40093367 |
575 | } |
| 433673e0 |
576 | # play sound signal at the end of test |
| 577 | if {$signal} { |
| 6d368502 |
578 | puts "\7\7\7\7" |
| 433673e0 |
579 | } |
| 40093367 |
580 | return |
| 581 | } |
| 582 | |
| 22db40eb |
583 | # Procedure to regenerate summary log from logs of test cases |
| 584 | help testsummarize { |
| 585 | Regenerate summary log in the test directory from logs of test cases. |
| 586 | This can be necessary if test grids are executed separately (e.g. on |
| 587 | different stations) or some grids have been re-executed. |
| 588 | Use: testsummarize dir |
| 589 | } |
| 590 | proc testsummarize {dir} { |
| 591 | global _test_case_regexp |
| 592 | |
| 593 | if { ! [file isdirectory $dir] } { |
| 6d368502 |
594 | error "Error: \"$dir\" is not a directory" |
| 22db40eb |
595 | } |
| 596 | |
| 597 | # get summary statements from all test cases in one log |
| 9753e6de |
598 | set log {} |
| 22db40eb |
599 | |
| 600 | # to avoid huge listing of logs, first find all subdirectories and iterate |
| 601 | # by them, parsing log files in each subdirectory independently |
| 602 | foreach grid [glob -directory $dir -types d -tails */*] { |
| 603 | foreach caselog [glob -nocomplain -directory [file join $dir $grid] -types f -tails *.log] { |
| 604 | set file [file join $dir $grid $caselog] |
| 605 | set nbfound 0 |
| 606 | set fd [open $file r] |
| 6d368502 |
607 | while { [gets $fd line] >= 0 } { |
| 608 | if { [regexp $_test_case_regexp $line res grp grd cas status message] } { |
| 22db40eb |
609 | if { "[file join $grid $caselog]" != "[file join $grp $grd ${cas}.log]" } { |
| 610 | puts "Error: $file contains status line for another test case ($line)" |
| 611 | } |
| 6d368502 |
612 | lappend log $line |
| 613 | incr nbfound |
| 614 | } |
| 615 | } |
| 22db40eb |
616 | close $fd |
| 617 | |
| 618 | if { $nbfound != 1 } { |
| 619 | puts "Error: $file contains $nbfound status lines, expected 1" |
| 620 | } |
| 621 | } |
| 622 | } |
| 623 | |
| 624 | _log_summarize $dir $log "Summary regenerated from logs at [clock format [clock seconds]]" |
| 625 | return |
| 626 | } |
| 627 | |
| cc6a292d |
628 | # Procedure to compare results of two runs of test cases |
| b725d7c5 |
629 | help testdiff { |
| 630 | Compare results of two executions of tests (CPU times, ...) |
| 22db40eb |
631 | Use: testdiff dir1 dir2 [groupname [gridname]] [options...] |
| b725d7c5 |
632 | Where dir1 and dir2 are directories containing logs of two test runs. |
| 633 | Allowed options are: |
| 28cab376 |
634 | -image [filename]: compare only images and save its in specified file (default |
| 635 | name is <dir1>/diffimage-<dir2>.log) |
| 636 | -cpu [filename]: compare only CPU and save it in specified file (default |
| 637 | name is <dir1>/diffcpu-<dir2>.log) |
| 638 | -memory [filename]: compare only memory and save it in specified file (default |
| 639 | name is <dir1>/diffmemory-<dir2>.log) |
| 22db40eb |
640 | -save filename: save resulting log in specified file (default name is |
| 60874ff8 |
641 | <dir1>/diff-<dir2>.log); HTML log is saved with same name |
| 22db40eb |
642 | and extension .html |
| b725d7c5 |
643 | -status {same|ok|all}: filter cases for comparing by their status: |
| 644 | same - only cases with same status are compared (default) |
| 645 | ok - only cases with OK status in both logs are compared |
| 646 | all - results are compared regardless of status |
| 647 | -verbose level: |
| 648 | 1 - output only differences |
| 22db40eb |
649 | 2 - output also list of logs and directories present in one of dirs only |
| 650 | 3 - (default) output also progress messages |
| d5f061b6 |
651 | -highlight_percent value: highlight considerable (>value in %) deviations |
| 652 | of CPU and memory (default value is 5%) |
| cc6a292d |
653 | } |
| 654 | proc testdiff {dir1 dir2 args} { |
| 655 | if { "$dir1" == "$dir2" } { |
| 6d368502 |
656 | error "Input directories are the same" |
| cc6a292d |
657 | } |
| 658 | |
| 659 | ###################################################### |
| 660 | # check arguments |
| 661 | ###################################################### |
| 662 | |
| 663 | # treat options |
| 22db40eb |
664 | set logfile [file join $dir1 "diff-[file tail $dir2].log"] |
| 28cab376 |
665 | set logfile_image "" |
| 666 | set logfile_cpu "" |
| 667 | set logfile_memory "" |
| 668 | set image false |
| 669 | set cpu false |
| 670 | set memory false |
| cc6a292d |
671 | set basename "" |
| 28cab376 |
672 | set save false |
| cc6a292d |
673 | set status "same" |
| 674 | set verbose 3 |
| 6d368502 |
675 | set highlight_percent 5 |
| cc6a292d |
676 | for {set narg 0} {$narg < [llength $args]} {incr narg} { |
| 6d368502 |
677 | set arg [lindex $args $narg] |
| 6d368502 |
678 | # log file name |
| 679 | if { $arg == "-save" } { |
| 680 | incr narg |
| 681 | if { $narg < [llength $args] && ! [regexp {^-} [lindex $args $narg]] } { |
| 682 | set logfile [lindex $args $narg] |
| 683 | } else { |
| 684 | error "Error: Option -save must be followed by log file name" |
| 685 | } |
| 28cab376 |
686 | set save true |
| 6d368502 |
687 | continue |
| 688 | } |
| 28cab376 |
689 | |
| 690 | # image compared log |
| 691 | if { $arg == "-image" } { |
| 692 | incr narg |
| 693 | if { $narg < [llength $args] && ! [regexp {^-} [lindex $args $narg]] } { |
| 694 | set logfile_image [lindex $args $narg] |
| 695 | } else { |
| 696 | set logfile_image [file join $dir1 "diffimage-[file tail $dir2].log"] |
| 697 | incr narg -1 |
| 698 | } |
| 699 | set image true |
| 700 | continue |
| 701 | } |
| 702 | |
| 703 | # CPU compared log |
| 704 | if { $arg == "-cpu" } { |
| 705 | incr narg |
| 706 | if { $narg < [llength $args] && ! [regexp {^-} [lindex $args $narg]] } { |
| 707 | set logfile_cpu [lindex $args $narg] |
| 708 | } else { |
| 709 | set logfile_cpu [file join $dir1 "diffcpu-[file tail $dir2].log"] |
| 710 | incr narg -1 |
| 711 | } |
| 712 | set cpu true |
| 713 | continue |
| 714 | } |
| 715 | |
| 716 | # memory compared log |
| 717 | if { $arg == "-memory" } { |
| 718 | incr narg |
| 719 | if { $narg < [llength $args] && ! [regexp {^-} [lindex $args $narg]] } { |
| 720 | set logfile_memory [lindex $args $narg] |
| 721 | } else { |
| 722 | set logfile_memory [file join $dir1 "diffmemory-[file tail $dir2].log"] |
| 723 | incr narg -1 |
| 724 | } |
| 725 | set memory true |
| 726 | continue |
| 727 | } |
| 728 | |
| 6d368502 |
729 | # status filter |
| 730 | if { $arg == "-status" } { |
| 731 | incr narg |
| 732 | if { $narg < [llength $args] && ! [regexp {^-} [lindex $args $narg]] } { |
| 733 | set status [lindex $args $narg] |
| 734 | } else { |
| 735 | set status "" |
| 736 | } |
| 737 | if { "$status" != "same" && "$status" != "all" && "$status" != "ok" } { |
| 738 | error "Error: Option -status must be followed by one of \"same\", \"all\", or \"ok\"" |
| 739 | } |
| 740 | continue |
| 741 | } |
| 742 | |
| 743 | # verbose level |
| 744 | if { $arg == "-verbose" } { |
| 745 | incr narg |
| 746 | if { $narg < [llength $args] && ! [regexp {^-} [lindex $args $narg]] } { |
| 747 | set verbose [expr [lindex $args $narg]] |
| 748 | } else { |
| 749 | error "Error: Option -verbose must be followed by integer verbose level" |
| 750 | } |
| 751 | continue |
| 752 | } |
| 753 | |
| 754 | # highlight_percent |
| 755 | if { $arg == "-highlight_percent" } { |
| 756 | incr narg |
| 757 | if { $narg < [llength $args] && ! [regexp {^-} [lindex $args $narg]] } { |
| 758 | set highlight_percent [expr [lindex $args $narg]] |
| 759 | } else { |
| 760 | error "Error: Option -highlight_percent must be followed by integer value" |
| 761 | } |
| 762 | continue |
| 763 | } |
| 764 | |
| 765 | if { [regexp {^-} $arg] } { |
| 766 | error "Error: unsupported option \"$arg\"" |
| 767 | } |
| 22db40eb |
768 | |
| 769 | # non-option arguments form a subdirectory path |
| 6d368502 |
770 | set basename [file join $basename $arg] |
| cc6a292d |
771 | } |
| 28cab376 |
772 | |
| 773 | if {$image != false || $cpu != false || $memory != false} { |
| 774 | if {$save != false} { |
| 775 | error "Error: Option -save can not be used with image/cpu/memory options" |
| 776 | } |
| 777 | } |
| cc6a292d |
778 | |
| 779 | # run diff procedure (recursive) |
| 28cab376 |
780 | _test_diff $dir1 $dir2 $basename $image $cpu $memory $status $verbose log log_image log_cpu log_memory |
| 781 | |
| cc6a292d |
782 | # save result to log file |
| 28cab376 |
783 | if {$image == false && $cpu == false && $memory == false} { |
| 784 | if { "$logfile" != "" } { |
| 785 | _log_save $logfile [join $log "\n"] |
| 786 | _log_html_diff "[file rootname $logfile].html" $log $dir1 $dir2 ${highlight_percent} |
| 787 | puts "Log is saved to $logfile (and .html)" |
| 788 | } |
| 789 | } else { |
| 790 | foreach mode {image cpu memory} { |
| 791 | if {"[set logfile_${mode}]" != ""} { |
| 792 | _log_save "[set logfile_${mode}]" [join "[set log_${mode}]" "\n"] |
| 793 | _log_html_diff "[file rootname [set logfile_${mode}]].html" "[set log_${mode}]" $dir1 $dir2 ${highlight_percent} |
| 794 | puts "Log (${mode}) is saved to [set logfile_${mode}] (and .html)" |
| 795 | } |
| 796 | } |
| cc6a292d |
797 | } |
| cc6a292d |
798 | return |
| 799 | } |
| 800 | |
| 351bbcba |
801 | # Procedure to check data file before adding it to repository |
| 802 | help testfile { |
| 803 | Check data file and prepare it for putting to test data files repository. |
| 804 | Use: testfile [filelist] |
| 805 | |
| 806 | Will report if: |
| 807 | - data file (non-binary) is in DOS encoding (CR/LF) |
| 808 | - same data file (with same or another name) already exists in the repository |
| 809 | - another file with the same name already exists |
| 810 | Note that names are assumed to be case-insensitive (for Windows). |
| 811 | |
| 812 | Unless the file is already in the repository, tries to load it, reports |
| 813 | the recognized file format, file size, number of faces and edges in the |
| 60874ff8 |
814 | loaded shape (if any), and makes snapshot (in the temporary directory). |
| 351bbcba |
815 | Finally it advises whether the file should be put to public section of the |
| 816 | repository. |
| 817 | } |
| 818 | proc testfile {filelist} { |
| 819 | global env |
| 820 | |
| 821 | # check that CSF_TestDataPath is defined |
| 822 | if { ! [info exists env(CSF_TestDataPath)] } { |
| 823 | error "Environment variable CSF_TestDataPath must be defined!" |
| 824 | } |
| 825 | |
| 826 | # build registry of existing data files (name -> path) and (size -> path) |
| 827 | puts "Checking available test data files..." |
| 828 | foreach dir [_split_path $env(CSF_TestDataPath)] { |
| 829 | while {[llength $dir] != 0} { |
| 830 | set curr [lindex $dir 0] |
| 831 | set dir [lrange $dir 1 end] |
| 832 | eval lappend dir [glob -nocomplain -directory $curr -type d *] |
| 833 | foreach file [glob -nocomplain -directory $curr -type f *] { |
| 834 | set name [file tail $file] |
| 835 | set name_lower [string tolower $name] |
| 836 | |
| 837 | # check that the file is not in DOS encoding |
| 838 | if { [_check_dos_encoding $file] } { |
| 839 | puts "Warning: file $file is in DOS encoding; was this intended?" |
| 840 | } |
| 841 | _check_file_format $file |
| 842 | |
| 843 | # check if file with the same name is present twice or more |
| 844 | if { [info exists names($name_lower)] } { |
| 845 | puts "Error: more than one file with name $name is present in the repository:" |
| 846 | if { [_diff_files $file $names($name_lower)] } { |
| 847 | puts "(files are different by content)" |
| 848 | } else { |
| 849 | puts "(files are same by content)" |
| 850 | } |
| 851 | puts "--> $file" |
| 852 | puts "--> $names($name_lower)" |
| 853 | continue |
| 854 | } |
| 855 | |
| 856 | # check if file with the same content exists |
| 857 | set size [file size $file] |
| 858 | if { [info exists sizes($size)] } { |
| 859 | foreach other $sizes($size) { |
| 860 | if { ! [_diff_files $file $other] } { |
| 861 | puts "Warning: two files with the same content found:" |
| 862 | puts "--> $file" |
| 863 | puts "--> $other" |
| 864 | } |
| 865 | } |
| 866 | } |
| 867 | |
| 868 | # add the file to the registry |
| 869 | set names($name_lower) $file |
| 870 | lappend sizes($size) $file |
| 6d368502 |
871 | } |
| 872 | } |
| 351bbcba |
873 | } |
| 874 | if { [llength $filelist] <= 0 } { return } |
| 875 | |
| 876 | # check the new files |
| 877 | set has_images f |
| 878 | puts "Checking new file(s)..." |
| 879 | foreach file $filelist { |
| 880 | # check for DOS encoding |
| 881 | if { [_check_dos_encoding $file] } { |
| 882 | puts "$file: Warning: DOS encoding detected" |
| 883 | } |
| 884 | |
| 885 | set name [file tail $file] |
| 886 | set name_lower [string tolower $name] |
| 887 | |
| 888 | # check for presence of the file with same name |
| 889 | if { [info exists names($name_lower)] } { |
| 890 | if { [_diff_files $file $names($name_lower)] } { |
| 891 | puts "$file: Error: name is already used by existing file\n--> $names($name_lower)" |
| 892 | } else { |
| 893 | puts "$file: OK: already in the repository \n--> $names($name_lower)" |
| 894 | continue |
| 895 | } |
| 896 | } |
| 897 | |
| 898 | # check if file with the same content exists |
| 899 | set size [file size $file] |
| 900 | if { [info exists sizes($size)] } { |
| 901 | set found f |
| 902 | foreach other $sizes($size) { |
| 903 | if { ! [_diff_files $file $other] } { |
| 6d368502 |
904 | puts "$file: OK: the same file is already present under name [file tail $other]\n--> $other" |
| 905 | set found t |
| 906 | break |
| 351bbcba |
907 | } |
| 908 | } |
| 909 | if { $found } { continue } |
| 910 | } |
| 911 | |
| 912 | # try to read the file |
| 913 | set format [_check_file_format $file] |
| 914 | if { [catch {uplevel load_data_file $file $format a}] } { |
| 915 | puts "$file: Error: Cannot read as $format file" |
| 916 | continue |
| 917 | } |
| 918 | |
| 919 | # get number of faces and edges |
| 920 | set edges 0 |
| 921 | set faces 0 |
| 922 | set nbs [uplevel nbshapes a] |
| 923 | regexp {EDGE[ \t:]*([0-9]+)} $nbs res edges |
| 924 | regexp {FACE[ \t:]*([0-9]+)} $nbs res faces |
| 925 | |
| 926 | # classify; first check file size and number of faces and edges |
| 927 | if { $size < 95000 && $faces < 20 && $edges < 100 } { |
| 928 | set dir public |
| 929 | } else { |
| 930 | set dir private |
| 931 | # check if one of names of that file corresponds to typical name for |
| 932 | # MDTV bugs or has extension .rle, this should be old model |
| 933 | if { [regexp -nocase {.*(cts|ats|pro|buc|ger|fra|usa|uki)[0-9]+.*} $name] || |
| 934 | [regexp -nocase {[.]rle\y} $name] } { |
| 935 | set dir old |
| 936 | } |
| 937 | } |
| 938 | |
| 939 | # add stats |
| 940 | puts "$file: $format size=[expr $size / 1024] KiB, nbfaces=$faces, nbedges=$edges -> $dir" |
| 941 | |
| 60874ff8 |
942 | set tmpdir [_get_temp_dir] |
| 943 | file mkdir $tmpdir/$dir |
| 351bbcba |
944 | |
| 945 | # make snapshot |
| 946 | pload AISV |
| 947 | uplevel vdisplay a |
| 948 | uplevel vfit |
| 949 | uplevel vzfit |
| 60874ff8 |
950 | uplevel vdump $tmpdir/$dir/[file rootname [file tail $file]].png |
| 351bbcba |
951 | set has_images t |
| 952 | } |
| 953 | if { $has_images } { |
| 60874ff8 |
954 | puts "Snapshots are saved in subdirectory [_get_temp_dir]" |
| 351bbcba |
955 | } |
| 956 | } |
| 957 | |
| 22db40eb |
958 | # Procedure to locate data file for test given its name. |
| 959 | # The search is performed assuming that the function is called |
| 960 | # from the test case script; the search order is: |
| 961 | # - subdirectory "data" of the test script (grid) folder |
| 962 | # - subdirectories in environment variable CSF_TestDataPath |
| 963 | # - subdirectory set by datadir command |
| 964 | # If file is not found, raises Tcl error. |
| 965 | proc locate_data_file {filename} { |
| 966 | global env groupname gridname casename |
| 967 | |
| 968 | # check if the file is located in the subdirectory data of the script dir |
| 969 | set scriptfile [info script] |
| 970 | if { $scriptfile != "" } { |
| 971 | set path [file join [file dirname $scriptfile] data $filename] |
| 6d368502 |
972 | if { [file exists $path] } { |
| 973 | return [file normalize $path] |
| 974 | } |
| 22db40eb |
975 | } |
| 976 | |
| 977 | # check sub-directories in paths indicated by CSF_TestDataPath |
| 978 | if { [info exists env(CSF_TestDataPath)] } { |
| 6d368502 |
979 | foreach dir [_split_path $env(CSF_TestDataPath)] { |
| 980 | while {[llength $dir] != 0} { |
| 981 | set name [lindex $dir 0] |
| 982 | set dir [lrange $dir 1 end] |
| 80482e01 |
983 | # skip directories starting with dot |
| 984 | if { [regexp {^[.]} $name] } { continue } |
| 6d368502 |
985 | if { [file exists $name/$filename] } { |
| 986 | return [file normalize $name/$filename] |
| 987 | } |
| 988 | eval lappend dir [glob -nocomplain -directory $name -type d *] |
| 989 | } |
| 990 | } |
| 22db40eb |
991 | } |
| 992 | |
| 993 | # check current datadir |
| 994 | if { [file exists [uplevel datadir]/$filename] } { |
| 6d368502 |
995 | return [file normalize [uplevel datadir]/$filename] |
| 22db40eb |
996 | } |
| 997 | |
| 998 | # raise error |
| c97067ad |
999 | error [join [list "File $filename could not be found" \ |
| 6d368502 |
1000 | "(should be in paths indicated by CSF_TestDataPath environment variable, " \ |
| 22db40eb |
1001 | "or in subfolder data in the script directory)"] "\n"] |
| 1002 | } |
| 1003 | |
| 40093367 |
1004 | # Internal procedure to find test case indicated by group, grid, and test case names; |
| 1005 | # returns: |
| 1006 | # - dir: path to the base directory of the tests group |
| 1007 | # - gridname: actual name of the grid |
| 1008 | # - casefile: path to the test case script |
| 1009 | # if no such test is found, raises error with appropriate message |
| 1010 | proc _get_test {group grid casename _dir _gridname _casefile} { |
| 1011 | upvar $_dir dir |
| 1012 | upvar $_gridname gridname |
| 1013 | upvar $_casefile casefile |
| 1014 | |
| 1015 | global env |
| 1016 | |
| 1017 | # check that environment variable defining paths to test scripts is defined |
| 1018 | if { ! [info exists env(CSF_TestScriptsPath)] || |
| 1019 | [llength $env(CSF_TestScriptsPath)] <= 0 } { |
| 1020 | error "Error: Environment variable CSF_TestScriptsPath is not defined" |
| 1021 | } |
| 1022 | |
| 1023 | # iterate by all script paths |
| 1024 | foreach dir [_split_path $env(CSF_TestScriptsPath)] { |
| 6d368502 |
1025 | # protection against empty paths |
| 1026 | set dir [string trim $dir] |
| 1027 | if { $dir == "" } { continue } |
| 40093367 |
1028 | |
| 1029 | # check that directory exists |
| 1030 | if { ! [file isdirectory $dir] } { |
| 1031 | puts "Warning: directory $dir listed in CSF_TestScriptsPath does not exist, skipped" |
| 6d368502 |
1032 | continue |
| 40093367 |
1033 | } |
| 1034 | |
| 1035 | # check if test group with given name exists in this dir |
| 1036 | # if not, continue to the next test dir |
| 1037 | if { ! [file isdirectory $dir/$group] } { continue } |
| 1038 | |
| 1039 | # check that grid with given name (possibly alias) exists; stop otherwise |
| 1040 | set gridname $grid |
| 1041 | if { ! [file isdirectory $dir/$group/$gridname] } { |
| 1042 | # check if grid is named by alias rather than by actual name |
| 1043 | if { [file exists $dir/$group/grids.list] } { |
| 1044 | set fd [open $dir/$group/grids.list] |
| 1045 | while { [gets $fd line] >= 0 } { |
| 1046 | if { [regexp "\[ \t\]*\#.*" $line] } { continue } |
| 1047 | if { [regexp "^$grid\[ \t\]*\(\[A-Za-z0-9_.-\]+\)\$" $line res gridname] } { |
| 1048 | break |
| 1049 | } |
| 1050 | } |
| 1051 | close $fd |
| 6d368502 |
1052 | } |
| 1053 | } |
| 40093367 |
1054 | if { ! [file isdirectory $dir/$group/$gridname] } { continue } |
| 1055 | |
| 1056 | # get actual file name of the script; stop if it cannot be found |
| 1057 | set casefile $dir/$group/$gridname/$casename |
| 1058 | if { ! [file exists $casefile] } { |
| 1059 | # check if this grid is aliased to another one |
| 1060 | if { [file exists $dir/$group/$gridname/cases.list] } { |
| 1061 | set fd [open $dir/$group/$gridname/cases.list] |
| 1062 | if { [gets $fd line] >= 0 } { |
| 1063 | set casefile [file normalize $dir/$group/$gridname/[string trim $line]/$casename] |
| 1064 | } |
| 6d368502 |
1065 | close $fd |
| 1066 | } |
| 40093367 |
1067 | } |
| 1068 | if { [file exists $casefile] } { |
| 1069 | # normal return |
| 1070 | return |
| 1071 | } |
| 1072 | } |
| 1073 | |
| 1074 | # coming here means specified test is not found; report error |
| 1075 | error [join [list "Error: test case $group / $grid / $casename is not found in paths listed in variable" \ |
| 6d368502 |
1076 | "CSF_TestScriptsPath (current value is \"$env(CSF_TestScriptsPath)\")"] "\n"] |
| 40093367 |
1077 | } |
| 1078 | |
| 1079 | # Internal procedure to run test case indicated by base directory, |
| 1080 | # grid and grid names, and test case file path. |
| 1081 | # The log can be obtained by command "dlog get". |
| 5df3a117 |
1082 | proc _run_test {scriptsdir group gridname casefile echo} { |
| 40093367 |
1083 | global env |
| 1084 | |
| 1085 | # start timer |
| 1086 | uplevel dchrono _timer reset |
| 1087 | uplevel dchrono _timer start |
| 433673e0 |
1088 | catch {uplevel meminfo h} membase |
| 40093367 |
1089 | |
| 1090 | # enable commands logging; switch to old-style mode if dlog command is not present |
| 1091 | set dlog_exists 1 |
| 1092 | if { [catch {dlog reset}] } { |
| 6d368502 |
1093 | set dlog_exists 0 |
| 5df3a117 |
1094 | } elseif { $echo } { |
| 1095 | decho on |
| 40093367 |
1096 | } else { |
| 6d368502 |
1097 | dlog reset |
| 1098 | dlog on |
| 1099 | rename puts puts-saved |
| 1100 | proc puts args { |
| 1101 | global _tests_verbose |
| 1102 | |
| 1103 | # log only output to stdout and stderr, not to file! |
| 1104 | if {[llength $args] > 1} { |
| 1105 | set optarg [lindex $args end-1] |
| 1106 | if { $optarg == "stdout" || $optarg == "stderr" || $optarg == "-newline" } { |
| 1107 | dlog add [lindex $args end] |
| 1108 | } else { |
| 1109 | eval puts-saved $args |
| 1110 | } |
| 1111 | } else { |
| 1112 | dlog add [lindex $args end] |
| 1113 | } |
| 1114 | } |
| 40093367 |
1115 | } |
| 1116 | |
| 40093367 |
1117 | # evaluate test case |
| 936f43da |
1118 | set tmp_imagedir 0 |
| 40093367 |
1119 | if [catch { |
| 60874ff8 |
1120 | # set variables identifying test case |
| 6d368502 |
1121 | uplevel set casename [file tail $casefile] |
| 1122 | uplevel set groupname $group |
| 1123 | uplevel set gridname $gridname |
| 1124 | uplevel set dirname $scriptsdir |
| 40093367 |
1125 | |
| 6d368502 |
1126 | # set path for saving of log and images (if not yet set) to temp dir |
| 1127 | if { ! [uplevel info exists imagedir] } { |
| 1128 | uplevel set test_image \$casename |
| a3ef6605 |
1129 | |
| 1130 | # create subdirectory in temp named after group and grid with timestamp |
| 1131 | set rootlogdir [_get_temp_dir] |
| 1132 | |
| 1133 | set imagedir "${group}-${gridname}-${::casename}-[clock format [clock seconds] -format {%Y-%m-%dT%Hh%Mm%Ss}]" |
| 1134 | set imagedir [file normalize ${rootlogdir}/$imagedir] |
| 1135 | |
| 1136 | if { [catch {file mkdir $imagedir}] || ! [file writable $imagedir] || |
| 1137 | ! [catch {glob -directory $imagedir *}] } { |
| 6d368502 |
1138 | # puts "Warning: Cannot create directory \"$imagedir\", or it is not empty; \"${rootlogdir}\" is used" |
| a3ef6605 |
1139 | set imagedir $rootlogdir |
| 1140 | } |
| 1141 | |
| d16b64f1 |
1142 | uplevel set imagedir \"$imagedir\" |
| 936f43da |
1143 | set tmp_imagedir 1 |
| 6d368502 |
1144 | } |
| 60874ff8 |
1145 | |
| 6d368502 |
1146 | # execute test scripts |
| 40093367 |
1147 | if { [file exists $scriptsdir/$group/begin] } { |
| 6d368502 |
1148 | puts "Executing $scriptsdir/$group/begin..."; flush stdout |
| 1149 | uplevel source $scriptsdir/$group/begin |
| 1150 | } |
| 1151 | if { [file exists $scriptsdir/$group/$gridname/begin] } { |
| 1152 | puts "Executing $scriptsdir/$group/$gridname/begin..."; flush stdout |
| 1153 | uplevel source $scriptsdir/$group/$gridname/begin |
| 1154 | } |
| 1155 | |
| 1156 | puts "Executing $casefile..."; flush stdout |
| 1157 | uplevel source $casefile |
| 1158 | |
| 1159 | if { [file exists $scriptsdir/$group/$gridname/end] } { |
| 1160 | puts "Executing $scriptsdir/$group/$gridname/end..."; flush stdout |
| 1161 | uplevel source $scriptsdir/$group/$gridname/end |
| 1162 | } |
| 1163 | if { [file exists $scriptsdir/$group/end] } { |
| 1164 | puts "Executing $scriptsdir/$group/end..."; flush stdout |
| 1165 | uplevel source $scriptsdir/$group/end |
| 1166 | } |
| 40093367 |
1167 | } res] { |
| 6d368502 |
1168 | puts "Tcl Exception: $res" |
| 40093367 |
1169 | } |
| 1170 | |
| 40093367 |
1171 | # stop logging |
| 1172 | if { $dlog_exists } { |
| 5df3a117 |
1173 | if { $echo } { |
| 6d368502 |
1174 | decho off |
| 5df3a117 |
1175 | } else { |
| 1176 | rename puts {} |
| 6d368502 |
1177 | rename puts-saved puts |
| 1178 | dlog off |
| 1179 | } |
| 40093367 |
1180 | } |
| 1181 | |
| 8418c617 |
1182 | # stop cpulimit killer if armed by the test |
| 1183 | cpulimit |
| 1184 | |
| 22db40eb |
1185 | # add memory and timing info |
| 1186 | set stats "" |
| 433673e0 |
1187 | if { ! [catch {uplevel meminfo h} memuse] } { |
| 936f43da |
1188 | append stats "MEMORY DELTA: [expr ($memuse - $membase) / 1024] KiB\n" |
| 22db40eb |
1189 | } |
| 40093367 |
1190 | uplevel dchrono _timer stop |
| 1191 | set time [uplevel dchrono _timer show] |
| 936f43da |
1192 | if { [regexp -nocase {CPU user time:[ \t]*([0-9.e-]+)} $time res cpu_usr] } { |
| 6d368502 |
1193 | append stats "TOTAL CPU TIME: $cpu_usr sec\n" |
| 22db40eb |
1194 | } |
| 1195 | if { $dlog_exists && ! $echo } { |
| 6d368502 |
1196 | dlog add $stats |
| 22db40eb |
1197 | } else { |
| 6d368502 |
1198 | puts $stats |
| 40093367 |
1199 | } |
| 936f43da |
1200 | |
| 1201 | # unset global vars |
| 1202 | uplevel unset casename groupname gridname dirname |
| 1203 | if { $tmp_imagedir } { uplevel unset imagedir test_image } |
| 40093367 |
1204 | } |
| 1205 | |
| 1206 | # Internal procedure to check log of test execution and decide if it passed or failed |
| 5fd3308a |
1207 | proc _check_log {dir group gridname casename errors log {_summary {}} {_html_log {}}} { |
| 40093367 |
1208 | global env |
| 1209 | if { $_summary != "" } { upvar $_summary summary } |
| 1210 | if { $_html_log != "" } { upvar $_html_log html_log } |
| 9753e6de |
1211 | set summary {} |
| 1212 | set html_log {} |
| 5fd3308a |
1213 | set errors_log {} |
| 40093367 |
1214 | |
| 6d368502 |
1215 | if [catch { |
| 1216 | |
| 1217 | # load definition of 'bad words' indicating test failure |
| 1218 | # note that rules are loaded in the order of decreasing priority (grid - group - common), |
| 1219 | # thus grid rules will override group ones |
| 1220 | set badwords {} |
| 1221 | foreach rulesfile [list $dir/$group/$gridname/parse.rules $dir/$group/parse.rules $dir/parse.rules] { |
| 1222 | if [catch {set fd [open $rulesfile r]}] { continue } |
| 1223 | while { [gets $fd line] >= 0 } { |
| 1224 | # skip comments and empty lines |
| 1225 | if { [regexp "\[ \t\]*\#.*" $line] } { continue } |
| 1226 | if { [string trim $line] == "" } { continue } |
| 1227 | # extract regexp |
| 1228 | if { ! [regexp {^([^/]*)/([^/]*)/(.*)$} $line res status rexp comment] } { |
| 1229 | puts "Warning: cannot recognize parsing rule \"$line\" in file $rulesfile" |
| 1230 | continue |
| 1231 | } |
| 1232 | set status [string trim $status] |
| 1233 | if { $comment != "" } { append status " ([string trim $comment])" } |
| 1234 | set rexp [regsub -all {\\b} $rexp {\\y}] ;# convert regexp from Perl to Tcl style |
| 1235 | lappend badwords [list $status $rexp] |
| 1236 | } |
| 1237 | close $fd |
| 1238 | } |
| 1239 | if { [llength $badwords] <= 0 } { |
| 1240 | puts "Warning: no definition of error indicators found (check files parse.rules)" |
| 1241 | } |
| 1242 | |
| 1243 | # analyse log line-by-line |
| 1244 | set todos {} ;# TODO statements |
| 1245 | set requs {} ;# REQUIRED statements |
| 1246 | set todo_incomplete -1 |
| 1247 | set status "" |
| 1248 | foreach line [split $log "\n"] { |
| 1249 | # check if line defines specific treatment of some messages |
| 1250 | if [regexp -nocase {^[ \s]*TODO ([^:]*):(.*)$} $line res platforms pattern] { |
| 1251 | if { ! [regexp -nocase {\mAll\M} $platforms] && |
| 863f782a |
1252 | ! [regexp -nocase "\\m[checkplatform]\\M" $platforms] } { |
| 6d368502 |
1253 | lappend html_log [_html_highlight IGNORE $line] |
| 1254 | continue ;# TODO statement is for another platform |
| 1255 | } |
| 1256 | |
| 1257 | # record TODOs that mark unstable cases |
| 1258 | if { [regexp {[\?]} $platforms] } { |
| 1259 | set todos_unstable([llength $todos]) 1 |
| 1260 | } |
| 1261 | |
| 1262 | # convert legacy regexps from Perl to Tcl style |
| 1263 | set pattern [regsub -all {\\b} [string trim $pattern] {\\y}] |
| 1264 | |
| 1265 | # special case: TODO TEST INCOMPLETE |
| 1266 | if { [string trim $pattern] == "TEST INCOMPLETE" } { |
| 1267 | set todo_incomplete [llength $todos] |
| 1268 | } |
| 1269 | |
| 1270 | lappend todos [list $pattern [llength $html_log] $line] |
| 1271 | lappend html_log [_html_highlight BAD $line] |
| 1272 | continue |
| 1273 | } |
| 1274 | if [regexp -nocase {^[ \s]*REQUIRED ([^:]*):[ \s]*(.*)$} $line res platforms pattern] { |
| 1275 | if { ! [regexp -nocase {\mAll\M} $platforms] && |
| 863f782a |
1276 | ! [regexp -nocase "\\m[checkplatform]\\M" $platforms] } { |
| 6d368502 |
1277 | lappend html_log [_html_highlight IGNORE $line] |
| 1278 | continue ;# REQUIRED statement is for another platform |
| 1279 | } |
| 1280 | lappend requs [list $pattern [llength $html_log] $line] |
| 1281 | lappend html_log [_html_highlight OK $line] |
| 1282 | continue |
| 1283 | } |
| 1284 | |
| 1285 | # check for presence of required messages |
| 1286 | set ismarked 0 |
| 1287 | for {set i 0} {$i < [llength $requs]} {incr i} { |
| 1288 | set pattern [lindex $requs $i 0] |
| 1289 | if { [regexp $pattern $line] } { |
| 1290 | incr required_count($i) |
| 1291 | lappend html_log [_html_highlight OK $line] |
| 1292 | set ismarked 1 |
| 1293 | continue |
| 1294 | } |
| 1295 | } |
| 1296 | if { $ismarked } { |
| 1297 | continue |
| 1298 | } |
| 1299 | |
| 1300 | # check for presence of messages indicating test result |
| 1301 | foreach bw $badwords { |
| 1302 | if { [regexp [lindex $bw 1] $line] } { |
| 1303 | # check if this is known bad case |
| 1304 | set is_known 0 |
| 1305 | for {set i 0} {$i < [llength $todos]} {incr i} { |
| 1306 | set pattern [lindex $todos $i 0] |
| 1307 | if { [regexp $pattern $line] } { |
| 1308 | set is_known 1 |
| 1309 | incr todo_count($i) |
| 1310 | lappend html_log [_html_highlight BAD $line] |
| 1311 | break |
| 1312 | } |
| 1313 | } |
| 1314 | |
| 1315 | # if it is not in todo, define status |
| 1316 | if { ! $is_known } { |
| 1317 | set stat [lindex $bw 0 0] |
| 1318 | if {$errors} { |
| 1319 | lappend errors_log $line |
| 1320 | } |
| 1321 | lappend html_log [_html_highlight $stat $line] |
| 1322 | if { $status == "" && $stat != "OK" && ! [regexp -nocase {^IGNOR} $stat] } { |
| 1323 | set status [lindex $bw 0] |
| 1324 | } |
| 1325 | } |
| 1326 | set ismarked 1 |
| 1327 | break |
| 1328 | } |
| 1329 | } |
| 1330 | if { ! $ismarked } { |
| 1331 | lappend html_log $line |
| 1332 | } |
| 1333 | } |
| 1334 | |
| 1335 | # check for presence of TEST COMPLETED statement |
| 1336 | if { $status == "" && ! [regexp {TEST COMPLETED} $log] } { |
| 1337 | # check whether absence of TEST COMPLETED is known problem |
| 1338 | if { $todo_incomplete >= 0 } { |
| 1339 | incr todo_count($todo_incomplete) |
| 1340 | } else { |
| 1341 | set status "FAILED (no final message is found)" |
| 1342 | } |
| 1343 | } |
| 1344 | |
| 1345 | # report test as failed if it doesn't contain required pattern |
| 1346 | if { $status == "" } { |
| 1347 | for {set i 0} {$i < [llength $requs]} {incr i} { |
| 1348 | if { ! [info exists required_count($i)] } { |
| 1349 | set linenum [lindex $requs $i 1] |
| 1350 | set html_log [lreplace $html_log $linenum $linenum [_html_highlight FAILED [lindex $requs $i 2]]] |
| 1351 | set status "FAILED (REQUIRED statement no. [expr $i + 1] is not found)" |
| 1352 | } |
| 1353 | } |
| 1354 | } |
| 1355 | |
| 1356 | # check declared bad cases and diagnose possible improvement |
| 1357 | # (bad case declared but not detected). |
| 1358 | # Note that absence of the problem marked by TODO with question mark |
| 1359 | # (unstable) is not reported as improvement. |
| 1360 | if { $status == "" } { |
| 1361 | for {set i 0} {$i < [llength $todos]} {incr i} { |
| 1362 | if { ! [info exists todos_unstable($i)] && |
| 1363 | (! [info exists todo_count($i)] || $todo_count($i) <= 0) } { |
| 1364 | set linenum [lindex $todos $i 1] |
| 1365 | set html_log [lreplace $html_log $linenum $linenum [_html_highlight IMPROVEMENT [lindex $todos $i 2]]] |
| 1366 | set status "IMPROVEMENT (expected problem TODO no. [expr $i + 1] is not detected)" |
| 1367 | break; |
| 1368 | } |
| 1369 | } |
| 1370 | } |
| 1371 | |
| 1372 | # report test as known bad if at least one of expected problems is found |
| 1373 | if { $status == "" && [llength [array names todo_count]] > 0 } { |
| 1374 | set status "BAD (known problem)" |
| 1375 | } |
| 1376 | |
| 1377 | # report normal OK |
| 1378 | if { $status == "" } {set status "OK" } |
| 1379 | |
| 1380 | } res] { |
| 1381 | set status "FAILED ($res)" |
| 1382 | } |
| 40093367 |
1383 | |
| 1384 | # put final message |
| 1385 | _log_and_puts summary "CASE $group $gridname $casename: $status" |
| 9753e6de |
1386 | set summary [join $summary "\n"] |
| 5fd3308a |
1387 | if {$errors} { |
| 6d368502 |
1388 | foreach error $errors_log { |
| 1389 | _log_and_puts summary " $error" |
| 1390 | } |
| 5fd3308a |
1391 | } |
| 9753e6de |
1392 | set html_log "[_html_highlight [lindex $status 0] $summary]\n[join $html_log \n]" |
| 40093367 |
1393 | } |
| 1394 | |
| 1395 | # Auxiliary procedure putting message to both cout and log variable (list) |
| 1396 | proc _log_and_puts {logvar message} { |
| 1397 | if { $logvar != "" } { |
| 6d368502 |
1398 | upvar $logvar log |
| 1399 | lappend log $message |
| 40093367 |
1400 | } |
| 1401 | puts $message |
| 1402 | } |
| 1403 | |
| 1404 | # Auxiliary procedure to log result on single test case |
| 1405 | proc _log_test_case {output logdir dir group grid casename logvar} { |
| 1406 | upvar $logvar log |
| 5fd3308a |
1407 | set show_errors 0 |
| 40093367 |
1408 | # check result and make HTML log |
| 5fd3308a |
1409 | _check_log $dir $group $grid $casename $show_errors $output summary html_log |
| 9753e6de |
1410 | lappend log $summary |
| 40093367 |
1411 | |
| 1412 | # save log to file |
| 1413 | if { $logdir != "" } { |
| 6d368502 |
1414 | _log_html $logdir/$group/$grid/$casename.html $html_log "Test $group $grid $casename" |
| 1415 | _log_save $logdir/$group/$grid/$casename.log "$output\n$summary" "Test $group $grid $casename" |
| 40093367 |
1416 | } |
| 1417 | } |
| 1418 | |
| 1419 | # Auxiliary procedure to save log to file |
| 1420 | proc _log_save {file log {title {}}} { |
| 1421 | # create missing directories as needed |
| 1422 | catch {file mkdir [file dirname $file]} |
| 1423 | |
| 1424 | # try to open a file |
| 1425 | if [catch {set fd [open $file w]} res] { |
| 6d368502 |
1426 | error "Error saving log file $file: $res" |
| 40093367 |
1427 | } |
| 1428 | |
| 1429 | # dump log and close |
| 1430 | puts $fd "$title\n" |
| 1431 | puts $fd $log |
| 1432 | close $fd |
| 1433 | return |
| 1434 | } |
| 1435 | |
| 22db40eb |
1436 | # Auxiliary procedure to make a (relative if possible) URL to a file for |
| 1437 | # inclusion a reference in HTML log |
| 1438 | proc _make_url {htmldir file} { |
| 1439 | set htmlpath [file split [file normalize $htmldir]] |
| 1440 | set filepath [file split [file normalize $file]] |
| 1441 | for {set i 0} {$i < [llength $htmlpath]} {incr i} { |
| 1442 | if { "[lindex $htmlpath $i]" != "[lindex $filepath $i]" } { |
| 1443 | if { $i == 0 } { break } |
| 1444 | return "[string repeat "../" [expr [llength $htmlpath] - $i - 1]][eval file join [lrange $filepath $i end]]" |
| 1445 | } |
| 1446 | } |
| 1447 | |
| 1448 | # if relative path could not be made, return full file URL |
| 1449 | return "file://[file normalize $file]" |
| 1450 | } |
| 1451 | |
| 40093367 |
1452 | # Auxiliary procedure to save log to file |
| 1453 | proc _log_html {file log {title {}}} { |
| 1454 | # create missing directories as needed |
| 1455 | catch {file mkdir [file dirname $file]} |
| 1456 | |
| 1457 | # try to open a file |
| 1458 | if [catch {set fd [open $file w]} res] { |
| 6d368502 |
1459 | error "Error saving log file $file: $res" |
| 40093367 |
1460 | } |
| 1461 | |
| 1462 | # print header |
| 22db40eb |
1463 | puts $fd "<html><head><title>$title</title></head><body><h1>$title</h1>" |
| 40093367 |
1464 | |
| ffc26091 |
1465 | # add images if present; these should have either PNG, GIF, or JPG extension, |
| 1466 | # and start with name of the test script, with optional suffix separated |
| 1467 | # by underscore or dash |
| 40093367 |
1468 | set imgbasename [file rootname [file tail $file]] |
| ffc26091 |
1469 | foreach img [lsort [glob -nocomplain -directory [file dirname $file] -tails \ |
| 1470 | ${imgbasename}.gif ${imgbasename}.png ${imgbasename}.jpg \ |
| 1471 | ${imgbasename}_*.gif ${imgbasename}_*.png ${imgbasename}_*.jpg \ |
| 1472 | ${imgbasename}-*.gif ${imgbasename}-*.png ${imgbasename}-*.jpg]] { |
| 6d368502 |
1473 | puts $fd "<p>[file tail $img]<br><img src=\"$img\"/><p>" |
| 40093367 |
1474 | } |
| 1475 | |
| b725d7c5 |
1476 | # print log body, trying to add HTML links to script files on lines like |
| 1477 | # "Executing <filename>..." |
| 40093367 |
1478 | puts $fd "<pre>" |
| b725d7c5 |
1479 | foreach line [split $log "\n"] { |
| 1480 | if { [regexp {Executing[ \t]+([a-zA-Z0-9._/:-]+[^.])} $line res script] && |
| 1481 | [file exists $script] } { |
| 22db40eb |
1482 | set line [regsub $script $line "<a href=\"[_make_url $file $script]\">$script</a>"] |
| b725d7c5 |
1483 | } |
| 1484 | puts $fd $line |
| 1485 | } |
| 40093367 |
1486 | puts $fd "</pre></body></html>" |
| 1487 | |
| 1488 | close $fd |
| 1489 | return |
| 1490 | } |
| 1491 | |
| 1492 | # Auxiliary method to make text with HTML highlighting according to status |
| 1493 | proc _html_color {status} { |
| 1494 | # choose a color for the cell according to result |
| 1495 | if { $status == "OK" } { |
| 6d368502 |
1496 | return lightgreen |
| 40093367 |
1497 | } elseif { [regexp -nocase {^FAIL} $status] } { |
| 77887d30 |
1498 | return ff8080 |
| 40093367 |
1499 | } elseif { [regexp -nocase {^BAD} $status] } { |
| 6d368502 |
1500 | return yellow |
| 40093367 |
1501 | } elseif { [regexp -nocase {^IMP} $status] } { |
| 6d368502 |
1502 | return orange |
| 40093367 |
1503 | } elseif { [regexp -nocase {^SKIP} $status] } { |
| 6d368502 |
1504 | return gray |
| 40093367 |
1505 | } elseif { [regexp -nocase {^IGNOR} $status] } { |
| 6d368502 |
1506 | return gray |
| 40093367 |
1507 | } else { |
| 6d368502 |
1508 | puts "Warning: no color defined for status $status, using red as if FAILED" |
| 1509 | return red |
| 40093367 |
1510 | } |
| 1511 | } |
| 1512 | |
| 1513 | # Format text line in HTML to be colored according to the status |
| 1514 | proc _html_highlight {status line} { |
| 1515 | return "<table><tr><td bgcolor=\"[_html_color $status]\">$line</td></tr></table>" |
| 1516 | } |
| 1517 | |
| 1518 | # Internal procedure to generate HTML page presenting log of the tests |
| 1519 | # execution in tabular form, with links to reports on individual cases |
| 1520 | proc _log_html_summary {logdir log totals regressions improvements total_time} { |
| 1521 | global _test_case_regexp |
| 1522 | |
| 9753e6de |
1523 | # create missing directories as needed |
| 1524 | file mkdir $logdir |
| 40093367 |
1525 | |
| 1526 | # try to open a file and start HTML |
| 1527 | if [catch {set fd [open $logdir/summary.html w]} res] { |
| 6d368502 |
1528 | error "Error creating log file: $res" |
| 40093367 |
1529 | } |
| 1530 | |
| 1531 | # write HRML header, including command to refresh log if still in progress |
| 1532 | puts $fd "<html><head>" |
| 1533 | puts $fd "<title>Tests summary</title>" |
| 1534 | if { $total_time == "" } { |
| 6d368502 |
1535 | puts $fd "<meta http-equiv=\"refresh\" content=\"10\">" |
| 40093367 |
1536 | } |
| 1537 | puts $fd "<meta http-equiv=\"pragma\" content=\"NO-CACHE\">" |
| 1538 | puts $fd "</head><body>" |
| 1539 | |
| 1540 | # put summary |
| 1541 | set legend(OK) "Test passed OK" |
| 1542 | set legend(FAILED) "Test failed (regression)" |
| 1543 | set legend(BAD) "Known problem" |
| 1544 | set legend(IMPROVEMENT) "Possible improvement (expected problem not detected)" |
| 1545 | set legend(SKIPPED) "Test skipped due to lack of data file" |
| 1546 | puts $fd "<h1>Summary</h1><table>" |
| 1547 | foreach nbstat $totals { |
| 6d368502 |
1548 | set status [lindex $nbstat 1] |
| 1549 | if { [info exists legend($status)] } { |
| 1550 | set comment $legend($status) |
| 1551 | } else { |
| 1552 | set comment "User-defined status" |
| 1553 | } |
| 1554 | puts $fd "<tr><td align=\"right\">[lindex $nbstat 0]</td><td bgcolor=\"[_html_color $status]\">$status</td><td>$comment</td></tr>" |
| 40093367 |
1555 | } |
| 1556 | puts $fd "</table>" |
| 1557 | |
| 1558 | # time stamp and elapsed time info |
| 1559 | if { $total_time != "" } { |
| 6d368502 |
1560 | puts $fd "<p>Generated on [clock format [clock seconds] -format {%Y-%m-%d %H:%M:%S}] on [info hostname]\n<p>" |
| 8a262fa1 |
1561 | puts $fd [join [split $total_time "\n"] "<p>"] |
| 40093367 |
1562 | } else { |
| 6d368502 |
1563 | puts $fd "<p>NOTE: This is intermediate summary; the tests are still running! This page will refresh automatically until tests are finished." |
| 40093367 |
1564 | } |
| 1565 | |
| 1566 | # print regressions and improvements |
| 1567 | foreach featured [list $regressions $improvements] { |
| 6d368502 |
1568 | if { [llength $featured] <= 1 } { continue } |
| 1569 | set status [string trim [lindex $featured 0] { :}] |
| 1570 | puts $fd "<h2>$status</h2>" |
| 1571 | puts $fd "<table>" |
| 1572 | set groupgrid "" |
| 1573 | foreach test [lrange $featured 1 end] { |
| 1574 | if { ! [regexp {^(.*)\s+([\w.]+)$} $test res gg name] } { |
| 1575 | set gg UNKNOWN |
| 1576 | set name "Error building short list; check details" |
| 1577 | } |
| 1578 | if { $gg != $groupgrid } { |
| 1579 | if { $groupgrid != "" } { puts $fd "</tr>" } |
| 1580 | set groupgrid $gg |
| 1581 | puts $fd "<tr><td>$gg</td>" |
| 1582 | } |
| 1583 | puts $fd "<td bgcolor=\"[_html_color $status]\"><a href=\"[regsub -all { } $gg /]/${name}.html\">$name</a></td>" |
| 1584 | } |
| 1585 | if { $groupgrid != "" } { puts $fd "</tr>" } |
| 1586 | puts $fd "</table>" |
| 40093367 |
1587 | } |
| 1588 | |
| 9753e6de |
1589 | # put detailed log with TOC |
| 1590 | puts $fd "<hr><h1>Details</h1>" |
| 1591 | puts $fd "<div style=\"float:right; padding: 10px; border-style: solid; border-color: blue; border-width: 2px;\">" |
| 40093367 |
1592 | |
| 1593 | # process log line-by-line |
| 1594 | set group {} |
| 1595 | set letter {} |
| 9753e6de |
1596 | set body {} |
| 1597 | foreach line [lsort -dictionary $log] { |
| 6d368502 |
1598 | # check that the line is case report in the form "CASE group grid name: result (explanation)" |
| 1599 | if { ! [regexp $_test_case_regexp $line res grp grd casename result message] } { |
| 1600 | continue |
| 1601 | } |
| 1602 | |
| 1603 | # start new group |
| 1604 | if { $grp != $group } { |
| 1605 | if { $letter != "" } { lappend body "</tr></table>" } |
| 1606 | set letter {} |
| 1607 | set group $grp |
| 1608 | set grid {} |
| 1609 | puts $fd "<a href=\"#$group\">$group</a><br>" |
| 1610 | lappend body "<h2><a name=\"$group\">Group $group</a></h2>" |
| 1611 | } |
| 1612 | |
| 1613 | # start new grid |
| 1614 | if { $grd != $grid } { |
| 1615 | if { $letter != "" } { lappend body "</tr></table>" } |
| 1616 | set letter {} |
| 1617 | set grid $grd |
| 1618 | puts $fd " <a href=\"#$group-$grid\">$grid</a><br>" |
| 1619 | lappend body "<h2><a name=\"$group-$grid\">Grid $group $grid</a></h2>" |
| 1620 | } |
| 1621 | |
| 1622 | # check if test case name is <letter><digit>; |
| 1623 | # if not, set alnum to period "." to recognize non-standard test name |
| 1624 | if { ! [regexp {\A([A-Za-z]{1,2})([0-9]{1,2})\Z} $casename res alnum number] && |
| 9753e6de |
1625 | ! [regexp {\A([A-Za-z0-9]+)_([0-9]+)\Z} $casename res alnum number] } { |
| 6d368502 |
1626 | set alnum $casename |
| 1627 | } |
| 40093367 |
1628 | |
| 6d368502 |
1629 | # start new row when letter changes or for non-standard names |
| 1630 | if { $alnum != $letter || $alnum == "." } { |
| 1631 | if { $letter != "" } { |
| 1632 | lappend body "</tr><tr>" |
| 1633 | } else { |
| 1634 | lappend body "<table><tr>" |
| 1635 | } |
| 1636 | set letter $alnum |
| 1637 | } |
| 40093367 |
1638 | |
| 6d368502 |
1639 | lappend body "<td bgcolor=\"[_html_color $result]\"><a href=\"$group/$grid/${casename}.html\">$casename</a></td>" |
| 40093367 |
1640 | } |
| 9753e6de |
1641 | puts $fd "</div>\n[join $body "\n"]</tr></table>" |
| 40093367 |
1642 | |
| 1643 | # add remaining lines of log as plain text |
| 1644 | puts $fd "<h2>Plain text messages</h2>\n<pre>" |
| 9753e6de |
1645 | foreach line $log { |
| 6d368502 |
1646 | if { ! [regexp $_test_case_regexp $line] } { |
| 1647 | puts $fd "$line" |
| 1648 | } |
| 40093367 |
1649 | } |
| 1650 | puts $fd "</pre>" |
| 1651 | |
| 1652 | # close file and exit |
| 1653 | puts $fd "</body>" |
| 1654 | close $fd |
| 1655 | return |
| 1656 | } |
| 1657 | |
| 1658 | # Procedure to dump summary logs of tests |
| 1659 | proc _log_summarize {logdir log {total_time {}}} { |
| 1660 | |
| 1661 | # sort log records alphabetically to have the same behavior on Linux and Windows |
| 1662 | # (also needed if tests are run in parallel) |
| 9753e6de |
1663 | set loglist [lsort -dictionary $log] |
| 40093367 |
1664 | |
| 1665 | # classify test cases by status |
| 1666 | foreach line $loglist { |
| 6d368502 |
1667 | if { [regexp {^CASE ([^:]*): ([[:alnum:]]+).*$} $line res caseid status] } { |
| 1668 | lappend stat($status) $caseid |
| 1669 | } |
| 40093367 |
1670 | } |
| 1671 | set totals {} |
| 1672 | set improvements {Improvements:} |
| 1673 | set regressions {Failed:} |
| 1674 | if { [info exists stat] } { |
| 6d368502 |
1675 | foreach status [lsort [array names stat]] { |
| 1676 | lappend totals [list [llength $stat($status)] $status] |
| 1677 | |
| 1678 | # separately count improvements (status starting with IMP) and regressions (all except IMP, OK, BAD, and SKIP) |
| 1679 | if { [regexp -nocase {^IMP} $status] } { |
| 1680 | eval lappend improvements $stat($status) |
| 1681 | } elseif { $status != "OK" && ! [regexp -nocase {^BAD} $status] && ! [regexp -nocase {^SKIP} $status] } { |
| 1682 | eval lappend regressions $stat($status) |
| 1683 | } |
| 1684 | } |
| 40093367 |
1685 | } |
| 1686 | |
| 1687 | # if time is specified, add totals |
| 1688 | if { $total_time != "" } { |
| 6d368502 |
1689 | if { [llength $improvements] > 1 } { |
| 1690 | _log_and_puts log [join $improvements "\n "] |
| 1691 | } |
| 1692 | if { [llength $regressions] > 1 } { |
| 1693 | _log_and_puts log [join $regressions "\n "] |
| 1694 | } |
| 1695 | if { [llength $improvements] == 1 && [llength $regressions] == 1 } { |
| 1696 | _log_and_puts log "No regressions" |
| 1697 | } |
| 1698 | _log_and_puts log "Total cases: [join $totals {, }]" |
| 1699 | _log_and_puts log $total_time |
| 40093367 |
1700 | } |
| 1701 | |
| 1702 | # save log to files |
| 1703 | if { $logdir != "" } { |
| 6d368502 |
1704 | _log_html_summary $logdir $log $totals $regressions $improvements $total_time |
| 1705 | _log_save $logdir/tests.log [join $log "\n"] "Tests summary" |
| 40093367 |
1706 | } |
| 1707 | |
| 1708 | return |
| 1709 | } |
| 1710 | |
| 1711 | # Internal procedure to generate XML log in JUnit style, for further |
| 1712 | # consumption by Jenkins or similar systems. |
| 1713 | # |
| 1714 | # The output is intended to conform to XML schema supported by Jenkins found at |
| 1715 | # https://svn.jenkins-ci.org/trunk/hudson/dtkit/dtkit-format/dtkit-junit-model/src/main/resources/com/thalesgroup/dtkit/junit/model/xsd/junit-4.xsd |
| 1716 | # |
| 1717 | # The mapping of the fields is inspired by annotated schema of Apache Ant JUnit XML format found at |
| 1718 | # http://windyroad.org/dl/Open%20Source/JUnit.xsd |
| 1719 | proc _log_xml_summary {logdir filename log include_cout} { |
| 1720 | global _test_case_regexp |
| 1721 | |
| 1722 | catch {file mkdir [file dirname $filename]} |
| 1723 | |
| 1724 | # try to open a file and start XML |
| 1725 | if [catch {set fd [open $filename w]} res] { |
| 6d368502 |
1726 | error "Error creating XML summary file $filename: $res" |
| 40093367 |
1727 | } |
| 1728 | puts $fd "<?xml version='1.0' encoding='utf-8'?>" |
| 1729 | puts $fd "<testsuites>" |
| 1730 | |
| 1731 | # prototype for command to generate test suite tag |
| 1732 | set time_and_host "timestamp=\"[clock format [clock seconds] -format {%Y-%m-%dT%H:%M:%S}]\" hostname=\"[info hostname]\"" |
| 1733 | set cmd_testsuite {puts $fd "<testsuite name=\"$group $grid\" tests=\"$nbtests\" failures=\"$nbfail\" errors=\"$nberr\" time=\"$time\" skipped=\"$nbskip\" $time_and_host>\n$testcases\n</testsuite>\n"} |
| 1734 | |
| 1735 | # sort log and process it line-by-line |
| 1736 | set group {} |
| 9753e6de |
1737 | foreach line [lsort -dictionary $log] { |
| 6d368502 |
1738 | # check that the line is case report in the form "CASE group grid name: result (explanation)" |
| 1739 | if { ! [regexp $_test_case_regexp $line res grp grd casename result message] } { |
| 1740 | continue |
| 1741 | } |
| 1742 | set message [string trim $message " \t\r\n()"] |
| 1743 | |
| 1744 | # start new testsuite for each grid |
| 1745 | if { $grp != $group || $grd != $grid } { |
| 1746 | |
| 1747 | # write previous test suite |
| 1748 | if [info exists testcases] { eval $cmd_testsuite } |
| 1749 | |
| 1750 | set testcases {} |
| 1751 | set nbtests 0 |
| 1752 | set nberr 0 |
| 1753 | set nbfail 0 |
| 1754 | set nbskip 0 |
| 1755 | set time 0. |
| 1756 | |
| 1757 | set group $grp |
| 1758 | set grid $grd |
| 1759 | } |
| 1760 | |
| 1761 | incr nbtests |
| 1762 | |
| 1763 | # parse test log and get its CPU time |
| 1764 | set testout {} |
| 1765 | set add_cpu {} |
| 1766 | if { [catch {set fdlog [open $logdir/$group/$grid/${casename}.log r]} ret] } { |
| 1767 | puts "Error: cannot open $logdir/$group/$grid/${casename}.log: $ret" |
| 1768 | } else { |
| 1769 | while { [gets $fdlog logline] >= 0 } { |
| 1770 | if { $include_cout } { |
| 1771 | append testout "$logline\n" |
| 1772 | } |
| 1773 | if [regexp -nocase {TOTAL CPU TIME:\s*([\d.]+)\s*sec} $logline res cpu] { |
| 1774 | set add_cpu " time=\"$cpu\"" |
| 1775 | set time [expr $time + $cpu] |
| 1776 | } |
| 1777 | } |
| 1778 | close $fdlog |
| 1779 | } |
| 1780 | if { ! $include_cout } { |
| 40093367 |
1781 | set testout "$line\n" |
| 6d368502 |
1782 | } |
| 1783 | |
| 1784 | # record test case with its output and status |
| 1785 | # Mapping is: SKIPPED, BAD, and OK to OK, all other to failure |
| 1786 | append testcases "\n <testcase name=\"$casename\"$add_cpu status=\"$result\">\n" |
| 1787 | append testcases "\n <system-out>\n$testout </system-out>" |
| 1788 | if { $result != "OK" } { |
| 1789 | if { [regexp -nocase {^SKIP} $result] } { |
| 1790 | incr nberr |
| 1791 | append testcases "\n <error name=\"$result\" message=\"$message\"/>" |
| 1792 | } elseif { [regexp -nocase {^BAD} $result] } { |
| 1793 | incr nbskip |
| 1794 | append testcases "\n <skipped>$message</skipped>" |
| 1795 | } else { |
| 1796 | incr nbfail |
| 1797 | append testcases "\n <failure name=\"$result\" message=\"$message\"/>" |
| 1798 | } |
| 1799 | } |
| 1800 | append testcases "\n </testcase>" |
| 40093367 |
1801 | } |
| 1802 | |
| 1803 | # write last test suite |
| 1804 | if [info exists testcases] { eval $cmd_testsuite } |
| 1805 | |
| 1806 | # the end |
| 1807 | puts $fd "</testsuites>" |
| 1808 | close $fd |
| 1809 | return |
| 1810 | } |
| 1811 | |
| 40093367 |
1812 | # Auxiliary procedure to split path specification (usually defined by |
| 1813 | # environment variable) into list of directories or files |
| 1814 | proc _split_path {pathspec} { |
| 1815 | global tcl_platform |
| 1816 | |
| 1817 | # first replace all \ (which might occur on Windows) by / |
| 1818 | regsub -all "\\\\" $pathspec "/" pathspec |
| 1819 | |
| 1820 | # split path by platform-specific separator |
| 1821 | return [split $pathspec [_path_separator]] |
| 1822 | } |
| 1823 | |
| 1824 | # Auxiliary procedure to define platform-specific separator for directories in |
| 1825 | # path specification |
| 1826 | proc _path_separator {} { |
| 1827 | global tcl_platform |
| 1828 | |
| 1829 | # split path by platform-specific separator |
| 1830 | if { $tcl_platform(platform) == "windows" } { |
| 6d368502 |
1831 | return ";" |
| 40093367 |
1832 | } else { |
| 6d368502 |
1833 | return ":" |
| 40093367 |
1834 | } |
| 1835 | } |
| 1836 | |
| cc6a292d |
1837 | # Procedure to make a diff and common of two lists |
| 1838 | proc _list_diff {list1 list2 _in1 _in2 _common} { |
| 1839 | upvar $_in1 in1 |
| 1840 | upvar $_in2 in2 |
| 1841 | upvar $_common common |
| 1842 | |
| 1843 | set in1 {} |
| 1844 | set in2 {} |
| 1845 | set common {} |
| 1846 | foreach item $list1 { |
| 6d368502 |
1847 | if { [lsearch -exact $list2 $item] >= 0 } { |
| 1848 | lappend common $item |
| cc6a292d |
1849 | } else { |
| 6d368502 |
1850 | lappend in1 $item |
| 1851 | } |
| cc6a292d |
1852 | } |
| 1853 | foreach item $list2 { |
| 6d368502 |
1854 | if { [lsearch -exact $common $item] < 0 } { |
| 1855 | lappend in2 $item |
| 1856 | } |
| cc6a292d |
1857 | } |
| 1858 | return |
| 1859 | } |
| 1860 | |
| 1861 | # procedure to load a file to Tcl string |
| 1862 | proc _read_file {filename} { |
| 1863 | set fd [open $filename r] |
| 1864 | set result [read -nonewline $fd] |
| 1865 | close $fd |
| 1866 | return $result |
| 1867 | } |
| 1868 | |
| 22db40eb |
1869 | # procedure to construct name for the mage diff file |
| 1870 | proc _diff_img_name {dir1 dir2 casepath imgfile} { |
| 1871 | return [file join $dir1 $casepath "diff-[file tail $dir2]-$imgfile"] |
| 1872 | } |
| 1873 | |
| 936f43da |
1874 | # auxiliary procedure to produce string comparing two values |
| 1875 | proc _diff_show_ratio {value1 value2} { |
| 6ae07908 |
1876 | if {[expr double ($value2)] == 0.} { |
| 1877 | return "$value1 / $value2" |
| 1878 | } else { |
| 1879 | return "$value1 / $value2 \[[format "%+5.2f%%" [expr 100 * ($value1 - $value2) / double($value2)]]\]" |
| 1880 | } |
| 936f43da |
1881 | } |
| 1882 | |
| 44fae8b1 |
1883 | # procedure to check cpu user time |
| 1884 | proc _check_time {regexp_msg} { |
| 1885 | upvar log log |
| 1886 | upvar log1 log1 |
| 1887 | upvar log2 log2 |
| 1888 | upvar log_cpu log_cpu |
| 1889 | upvar cpu cpu |
| 1890 | upvar basename basename |
| 1891 | upvar casename casename |
| 1892 | set time1_list [dict create] |
| 1893 | set time2_list [dict create] |
| 1894 | set cpu_find UNDEFINED |
| 1895 | |
| 1896 | foreach line1 [split $log1 "\n"] { |
| 1897 | if { [regexp "${regexp_msg}" $line1 dump chronometer_name cpu_find] } { |
| 1898 | dict set time1_list "${chronometer_name}" "${cpu_find}" |
| 1899 | } |
| 1900 | } |
| 1901 | |
| 1902 | foreach line2 [split $log2 "\n"] { |
| 1903 | if { [regexp "${regexp_msg}" $line2 dump chronometer_name cpu_find] } { |
| 1904 | dict set time2_list "${chronometer_name}" "${cpu_find}" |
| 1905 | } |
| 1906 | } |
| 1907 | |
| 1908 | if { [llength [dict keys $time1_list]] != [llength [dict keys $time2_list]] } { |
| 1909 | puts "Error: number of dchrono/chrono COUNTER are different in the same test cases" |
| 1910 | } else { |
| 1911 | foreach key [dict keys $time1_list] { |
| 1912 | set time1 [dict get $time1_list $key] |
| 1913 | set time2 [dict get $time2_list $key] |
| 1914 | |
| 1915 | # compare CPU user time with 10% precision (but not less 0.5 sec) |
| 1916 | if { [expr abs ($time1 - $time2) > 0.5 + 0.05 * abs ($time1 + $time2)] } { |
| 1917 | if {$cpu != false} { |
| 1918 | _log_and_puts log_cpu "COUNTER $key: [split $basename /] $casename: [_diff_show_ratio $time1 $time2]" |
| 1919 | } else { |
| 1920 | _log_and_puts log "COUNTER $key: [split $basename /] $casename: [_diff_show_ratio $time1 $time2]" |
| 1921 | } |
| 1922 | } |
| 1923 | } |
| 1924 | } |
| 1925 | } |
| 1926 | |
| cc6a292d |
1927 | # Procedure to compare results of two runs of test cases |
| 28cab376 |
1928 | proc _test_diff {dir1 dir2 basename image cpu memory status verbose _logvar _logimage _logcpu _logmemory {_statvar ""}} { |
| cc6a292d |
1929 | upvar $_logvar log |
| 28cab376 |
1930 | upvar $_logimage log_image |
| 1931 | upvar $_logcpu log_cpu |
| 1932 | upvar $_logmemory log_memory |
| cc6a292d |
1933 | |
| 22db40eb |
1934 | # make sure to load diffimage command |
| 1935 | uplevel pload VISUALIZATION |
| 1936 | |
| cc6a292d |
1937 | # prepare variable (array) for collecting statistics |
| 1938 | if { "$_statvar" != "" } { |
| 1939 | upvar $_statvar stat |
| 1940 | } else { |
| 1941 | set stat(cpu1) 0 |
| 1942 | set stat(cpu2) 0 |
| 22db40eb |
1943 | set stat(mem1) 0 |
| 1944 | set stat(mem2) 0 |
| cc6a292d |
1945 | set log {} |
| 28cab376 |
1946 | set log_image {} |
| 1947 | set log_cpu {} |
| 1948 | set log_memory {} |
| cc6a292d |
1949 | } |
| 1950 | |
| 1951 | # first check subdirectories |
| 1952 | set path1 [file join $dir1 $basename] |
| 1953 | set path2 [file join $dir2 $basename] |
| 1954 | set list1 [glob -directory $path1 -types d -tails -nocomplain *] |
| 1955 | set list2 [glob -directory $path2 -types d -tails -nocomplain *] |
| 1956 | if { [llength $list1] >0 || [llength $list2] > 0 } { |
| 1957 | _list_diff $list1 $list2 in1 in2 common |
| 1958 | if { "$verbose" > 1 } { |
| 1959 | if { [llength $in1] > 0 } { _log_and_puts log "Only in $path1: $in1" } |
| 1960 | if { [llength $in2] > 0 } { _log_and_puts log "Only in $path2: $in2" } |
| 1961 | } |
| 1962 | foreach subdir $common { |
| 1963 | if { "$verbose" > 2 } { |
| 6d368502 |
1964 | _log_and_puts log "Checking [file join $basename $subdir]" |
| 1965 | } |
| 28cab376 |
1966 | _test_diff $dir1 $dir2 [file join $basename $subdir] $image $cpu $memory $status $verbose log log_image log_cpu log_memory stat |
| cc6a292d |
1967 | } |
| 1968 | } else { |
| 1969 | # check log files (only if directory has no subdirs) |
| 1970 | set list1 [glob -directory $path1 -types f -tails -nocomplain *.log] |
| 1971 | set list2 [glob -directory $path2 -types f -tails -nocomplain *.log] |
| 1972 | _list_diff $list1 $list2 in1 in2 common |
| 1973 | if { "$verbose" > 1 } { |
| 1974 | if { [llength $in1] > 0 } { _log_and_puts log "Only in $path1: $in1" } |
| 1975 | if { [llength $in2] > 0 } { _log_and_puts log "Only in $path2: $in2" } |
| 1976 | } |
| 936f43da |
1977 | set gcpu1 0 |
| 1978 | set gcpu2 0 |
| 1979 | set gmem1 0 |
| 1980 | set gmem2 0 |
| cc6a292d |
1981 | foreach logfile $common { |
| 1982 | # load two logs |
| 6d368502 |
1983 | set log1 [_read_file [file join $dir1 $basename $logfile]] |
| 1984 | set log2 [_read_file [file join $dir2 $basename $logfile]] |
| 22db40eb |
1985 | set casename [file rootname $logfile] |
| 28cab376 |
1986 | |
| cc6a292d |
1987 | # check execution statuses |
| 28cab376 |
1988 | if {$image == false && $cpu == false && $memory == false} { |
| 1989 | set status1 UNDEFINED |
| 1990 | set status2 UNDEFINED |
| 1991 | if { ! [regexp {CASE [^:]*:\s*([\w]+)} $log1 res1 status1] || |
| 1992 | ! [regexp {CASE [^:]*:\s*([\w]+)} $log2 res2 status2] || |
| 1993 | "$status1" != "$status2" } { |
| 1994 | _log_and_puts log "STATUS [split $basename /] $casename: $status1 / $status2" |
| 1995 | # if test statuses are different, further comparison makes |
| 1996 | # no sense unless explicitly requested |
| 1997 | if { "$status" != "all" } { |
| 1998 | continue |
| 1999 | } |
| 2000 | } |
| 2001 | if { "$status" == "ok" && "$status1" != "OK" } { |
| cc6a292d |
2002 | continue |
| 6d368502 |
2003 | } |
| 2004 | } |
| 44fae8b1 |
2005 | |
| 2006 | if { ! $image } { |
| 2007 | # check CPU user time in test cases |
| 2008 | set checkCPURegexp "COUNTER (.+): (\[-0-9.+eE\]+)" |
| 2009 | if { [regexp "${checkCPURegexp}" $log1] && |
| 2010 | [regexp "${checkCPURegexp}" $log2] } { |
| 2011 | _check_time "${checkCPURegexp}" |
| 2012 | } |
| 2013 | } |
| 28cab376 |
2014 | |
| cc6a292d |
2015 | # check CPU times |
| 28cab376 |
2016 | if {$cpu != false || ($image == false && $cpu == false && $memory == false)} { |
| 2017 | set cpu1 UNDEFINED |
| 2018 | set cpu2 UNDEFINED |
| 2019 | if { [regexp {TOTAL CPU TIME:\s*([\d.]+)} $log1 res1 cpu1] && |
| 2020 | [regexp {TOTAL CPU TIME:\s*([\d.]+)} $log2 res1 cpu2] } { |
| 2021 | set stat(cpu1) [expr $stat(cpu1) + $cpu1] |
| 2022 | set stat(cpu2) [expr $stat(cpu2) + $cpu2] |
| 2023 | set gcpu1 [expr $gcpu1 + $cpu1] |
| 2024 | set gcpu2 [expr $gcpu2 + $cpu2] |
| 2025 | |
| 2026 | # compare CPU times with 10% precision (but not less 0.5 sec) |
| 2027 | if { [expr abs ($cpu1 - $cpu2) > 0.5 + 0.05 * abs ($cpu1 + $cpu2)] } { |
| 2028 | if {$cpu != false} { |
| 2029 | _log_and_puts log_cpu "CPU [split $basename /] $casename: [_diff_show_ratio $cpu1 $cpu2]" |
| 2030 | } else { |
| 2031 | _log_and_puts log "CPU [split $basename /] $casename: [_diff_show_ratio $cpu1 $cpu2]" |
| 2032 | } |
| 2033 | } |
| cc6a292d |
2034 | } |
| 6d368502 |
2035 | } |
| 22db40eb |
2036 | |
| 2037 | # check memory delta |
| 28cab376 |
2038 | if {$memory != false || ($image == false && $cpu == false && $memory == false)} { |
| 2039 | set mem1 UNDEFINED |
| 2040 | set mem2 UNDEFINED |
| 2041 | if { [regexp {MEMORY DELTA:\s*([\d.]+)} $log1 res1 mem1] && |
| 2042 | [regexp {MEMORY DELTA:\s*([\d.]+)} $log2 res1 mem2] } { |
| 2043 | set stat(mem1) [expr $stat(mem1) + $mem1] |
| 2044 | set stat(mem2) [expr $stat(mem2) + $mem2] |
| 2045 | set gmem1 [expr $gmem1 + $mem1] |
| 2046 | set gmem2 [expr $gmem2 + $mem2] |
| 2047 | |
| 2048 | # compare memory usage with 10% precision (but not less 16 KiB) |
| 2049 | if { [expr abs ($mem1 - $mem2) > 16 + 0.05 * abs ($mem1 + $mem2)] } { |
| 2050 | if {$memory != false} { |
| 2051 | _log_and_puts log_memory "MEMORY [split $basename /] $casename: [_diff_show_ratio $mem1 $mem2]" |
| 2052 | } else { |
| 2053 | _log_and_puts log "MEMORY [split $basename /] $casename: [_diff_show_ratio $mem1 $mem2]" |
| 2054 | } |
| 2055 | } |
| 22db40eb |
2056 | } |
| 6d368502 |
2057 | } |
| 22db40eb |
2058 | |
| 2059 | # check images |
| 28cab376 |
2060 | if {$image != false || ($image == false && $cpu == false && $memory == false)} { |
| 2061 | set imglist1 [glob -directory $path1 -types f -tails -nocomplain ${casename}.{png,gif} ${casename}-*.{png,gif} ${casename}_*.{png,gif}] |
| 2062 | set imglist2 [glob -directory $path2 -types f -tails -nocomplain ${casename}.{png,gif} ${casename}-*.{png,gif} ${casename}_*.{png,gif}] |
| 2063 | _list_diff $imglist1 $imglist2 imgin1 imgin2 imgcommon |
| 2064 | if { "$verbose" > 1 } { |
| 2065 | if { [llength $imgin1] > 0 } { |
| 2066 | if {$image != false} { |
| 2067 | _log_and_puts log_image "Only in $path1: $imgin1" |
| 2068 | } else { |
| 2069 | _log_and_puts log "Only in $path1: $imgin1" |
| 2070 | } |
| 2071 | } |
| 2072 | if { [llength $imgin2] > 0 } { |
| 2073 | if {$image != false} { |
| 2074 | _log_and_puts log_image "Only in $path2: $imgin2" |
| 2075 | } else { |
| 2076 | _log_and_puts log "Only in $path2: $imgin2" |
| 2077 | } |
| 2078 | } |
| 2079 | } |
| 2080 | foreach imgfile $imgcommon { |
| 2081 | # if { $verbose > 1 } { _log_and_puts log "Checking [split basename /] $casename: $imgfile" } |
| 2082 | set diffile [_diff_img_name $dir1 $dir2 $basename $imgfile] |
| 2083 | if { [catch {diffimage [file join $dir1 $basename $imgfile] \ |
| 2084 | [file join $dir2 $basename $imgfile] \ |
| 2085 | 0 0 0 $diffile} diff] } { |
| 2086 | if {$image != false} { |
| 2087 | _log_and_puts log_image "IMAGE [split $basename /] $casename: $imgfile cannot be compared" |
| 2088 | } else { |
| 2089 | _log_and_puts log "IMAGE [split $basename /] $casename: $imgfile cannot be compared" |
| 2090 | } |
| 2091 | file delete -force $diffile ;# clean possible previous result of diffimage |
| 2092 | } elseif { $diff != 0 } { |
| 2093 | if {$image != false} { |
| 2094 | _log_and_puts log_image "IMAGE [split $basename /] $casename: $imgfile differs" |
| 2095 | } else { |
| 2096 | _log_and_puts log "IMAGE [split $basename /] $casename: $imgfile differs" |
| 2097 | } |
| 2098 | } else { |
| 2099 | file delete -force $diffile ;# clean useless artifact of diffimage |
| 2100 | } |
| 22db40eb |
2101 | } |
| 2102 | } |
| 6d368502 |
2103 | } |
| 936f43da |
2104 | |
| 2105 | # report CPU and memory difference in group if it is greater than 10% |
| 28cab376 |
2106 | if {$cpu != false || ($image == false && $cpu == false && $memory == false)} { |
| 2107 | if { [expr abs ($gcpu1 - $gcpu2) > 0.5 + 0.005 * abs ($gcpu1 + $gcpu2)] } { |
| 2108 | if {$cpu != false} { |
| 2109 | _log_and_puts log_cpu "CPU [split $basename /]: [_diff_show_ratio $gcpu1 $gcpu2]" |
| 2110 | } else { |
| 2111 | _log_and_puts log "CPU [split $basename /]: [_diff_show_ratio $gcpu1 $gcpu2]" |
| 2112 | } |
| 2113 | } |
| 936f43da |
2114 | } |
| 28cab376 |
2115 | if {$memory != false || ($image == false && $cpu == false && $memory == false)} { |
| 2116 | if { [expr abs ($gmem1 - $gmem2) > 16 + 0.005 * abs ($gmem1 + $gmem2)] } { |
| 2117 | if {$memory != false} { |
| 2118 | _log_and_puts log_memory "MEMORY [split $basename /]: [_diff_show_ratio $gmem1 $gmem2]" |
| 2119 | } else { |
| 2120 | _log_and_puts log "MEMORY [split $basename /]: [_diff_show_ratio $gmem1 $gmem2]" |
| 2121 | } |
| 2122 | } |
| 936f43da |
2123 | } |
| cc6a292d |
2124 | } |
| 2125 | |
| 2126 | if { "$_statvar" == "" } { |
| 28cab376 |
2127 | if {$memory != false || ($image == false && $cpu == false && $memory == false)} { |
| 2128 | if {$memory != false} { |
| 2129 | _log_and_puts log_memory "Total MEMORY difference: [_diff_show_ratio $stat(mem1) $stat(mem2)]" |
| 2130 | } else { |
| 2131 | _log_and_puts log "Total MEMORY difference: [_diff_show_ratio $stat(mem1) $stat(mem2)]" |
| 2132 | } |
| 2133 | } |
| 2134 | if {$cpu != false || ($image == false && $cpu == false && $memory == false)} { |
| 2135 | if {$cpu != false} { |
| 2136 | _log_and_puts log_cpu "Total CPU difference: [_diff_show_ratio $stat(cpu1) $stat(cpu2)]" |
| 2137 | } else { |
| 2138 | _log_and_puts log "Total CPU difference: [_diff_show_ratio $stat(cpu1) $stat(cpu2)]" |
| 2139 | } |
| 2140 | } |
| cc6a292d |
2141 | } |
| 2142 | } |
| b725d7c5 |
2143 | |
| 22db40eb |
2144 | # Auxiliary procedure to save log of results comparison to file |
| d5f061b6 |
2145 | proc _log_html_diff {file log dir1 dir2 highlight_percent} { |
| 22db40eb |
2146 | # create missing directories as needed |
| 2147 | catch {file mkdir [file dirname $file]} |
| 2148 | |
| 2149 | # try to open a file |
| 2150 | if [catch {set fd [open $file w]} res] { |
| 6d368502 |
2151 | error "Error saving log file $file: $res" |
| 22db40eb |
2152 | } |
| 2153 | |
| 2154 | # print header |
| 2155 | puts $fd "<html><head><title>Diff $dir1 vs. $dir2</title></head><body>" |
| 433673e0 |
2156 | puts $fd "<h1>Comparison of test results:</h1>" |
| 2157 | puts $fd "<h2>Version A - $dir1</h2>" |
| 2158 | puts $fd "<h2>Version B - $dir2</h2>" |
| 22db40eb |
2159 | |
| 2160 | # print log body, trying to add HTML links to script files on lines like |
| 2161 | # "Executing <filename>..." |
| 2162 | puts $fd "<pre>" |
| 2163 | set logpath [file split [file normalize $file]] |
| 9753e6de |
2164 | foreach line $log { |
| d5f061b6 |
2165 | # put a line; highlight considerable (> ${highlight_percent}%) deviations of CPU and memory |
| 936f43da |
2166 | if { [regexp "\[\\\[](\[0-9.e+-]+)%\[\]]" $line res value] && |
| d5f061b6 |
2167 | [expr abs($value)] > ${highlight_percent} } { |
| 77887d30 |
2168 | puts $fd "<table><tr><td bgcolor=\"[expr $value > 0 ? \"ff8080\" : \"lightgreen\"]\">$line</td></tr></table>" |
| 936f43da |
2169 | } else { |
| 2170 | puts $fd $line |
| 2171 | } |
| 22db40eb |
2172 | |
| 936f43da |
2173 | # add images |
| 22db40eb |
2174 | if { [regexp {IMAGE[ \t]+([^:]+):[ \t]+([A-Za-z0-9_.-]+)} $line res case img] } { |
| 2175 | if { [catch {eval file join "" [lrange $case 0 end-1]} gridpath] } { |
| 6d368502 |
2176 | # note: special handler for the case if test grid directoried are compared directly |
| 2177 | set gridpath "" |
| 22db40eb |
2178 | } |
| 17b45a29 |
2179 | set aCaseName [lindex $case end] |
| 2180 | set img1 "<a href=\"[_make_url $file [file join $dir1 $gridpath $aCaseName.html]]\"><img src=\"[_make_url $file [file join $dir1 $gridpath $img]]\"></a>" |
| 2181 | set img2 "<a href=\"[_make_url $file [file join $dir2 $gridpath $aCaseName.html]]\"><img src=\"[_make_url $file [file join $dir2 $gridpath $img]]\"></a>" |
| 22db40eb |
2182 | |
| 2183 | set difffile [_diff_img_name $dir1 $dir2 $gridpath $img] |
| 2184 | if { [file exists $difffile] } { |
| 2185 | set imgd "<img src=\"[_make_url $file $difffile]\">" |
| 2186 | } else { |
| 2187 | set imgd "N/A" |
| 2188 | } |
| 2189 | |
| 433673e0 |
2190 | puts $fd "<table><tr><th><abbr title=\"$dir1\">Version A</abbr></th><th><abbr title=\"$dir2\">Version B</abbr></th><th>Different pixels</th></tr>" |
| 22db40eb |
2191 | puts $fd "<tr><td>$img1</td><td>$img2</td><td>$imgd</td></tr></table>" |
| 2192 | } |
| 2193 | } |
| 2194 | puts $fd "</pre></body></html>" |
| 2195 | |
| 2196 | close $fd |
| 2197 | return |
| 2198 | } |
| 2199 | |
| b725d7c5 |
2200 | # get number of CPUs on the system |
| 2201 | proc _get_nb_cpus {} { |
| 2202 | global tcl_platform env |
| 2203 | |
| 2204 | if { "$tcl_platform(platform)" == "windows" } { |
| 2205 | # on Windows, take the value of the environment variable |
| 2206 | if { [info exists env(NUMBER_OF_PROCESSORS)] && |
| 2207 | ! [catch {expr $env(NUMBER_OF_PROCESSORS) > 0} res] && $res >= 0 } { |
| 2208 | return $env(NUMBER_OF_PROCESSORS) |
| 2209 | } |
| 2210 | } elseif { "$tcl_platform(os)" == "Linux" } { |
| 2211 | # on Linux, take number of logical processors listed in /proc/cpuinfo |
| 2212 | if { [catch {open "/proc/cpuinfo" r} fd] } { |
| 2213 | return 0 ;# should never happen, but... |
| 2214 | } |
| 2215 | set nb 0 |
| 6d368502 |
2216 | while { [gets $fd line] >= 0 } { |
| 2217 | if { [regexp {^processor[ \t]*:} $line] } { |
| 2218 | incr nb |
| 2219 | } |
| 2220 | } |
| b725d7c5 |
2221 | close $fd |
| 2222 | return $nb |
| 2223 | } elseif { "$tcl_platform(os)" == "Darwin" } { |
| 2224 | # on MacOS X, call sysctl command |
| 2225 | if { ! [catch {exec sysctl hw.ncpu} ret] && |
| 2226 | [regexp {^hw[.]ncpu[ \t]*:[ \t]*([0-9]+)} $ret res nb] } { |
| 2227 | return $nb |
| 2228 | } |
| 2229 | } |
| 2230 | |
| 2231 | # if cannot get good value, return 0 as default |
| 2232 | return 0 |
| 2233 | } |
| 351bbcba |
2234 | |
| 2235 | # check two files for difference |
| 2236 | proc _diff_files {file1 file2} { |
| 2237 | set fd1 [open $file1 "r"] |
| 2238 | set fd2 [open $file2 "r"] |
| 2239 | |
| 2240 | set differ f |
| 2241 | while {! $differ} { |
| 2242 | set nb1 [gets $fd1 line1] |
| 2243 | set nb2 [gets $fd2 line2] |
| 2244 | if { $nb1 != $nb2 } { set differ t; break } |
| 2245 | if { $nb1 < 0 } { break } |
| 2246 | if { [string compare $line1 $line2] } { |
| 2247 | set differ t |
| 2248 | } |
| 2249 | } |
| 2250 | |
| 2251 | close $fd1 |
| 2252 | close $fd2 |
| 2253 | |
| 2254 | return $differ |
| 2255 | } |
| 2256 | |
| 2257 | # Check if file is in DOS encoding. |
| 2258 | # This check is done by presence of \r\n combination at the end of the first |
| 2259 | # line (i.e. prior to any other \n symbol). |
| 2260 | # Note that presence of non-ascii symbols typically used for recognition |
| 2261 | # of binary files is not suitable since some IGES and STEP files contain |
| 2262 | # non-ascii symbols. |
| 2263 | # Special check is added for PNG files which contain \r\n in the beginning. |
| 2264 | proc _check_dos_encoding {file} { |
| 2265 | set fd [open $file rb] |
| 2266 | set isdos f |
| 2267 | if { [gets $fd line] && [regexp {.*\r$} $line] && |
| 2268 | ! [regexp {^.PNG} $line] } { |
| 2269 | set isdos t |
| 2270 | } |
| 2271 | close $fd |
| 2272 | return $isdos |
| 2273 | } |
| 2274 | |
| 2275 | # procedure to recognize format of a data file by its first symbols (for OCCT |
| 2276 | # BREP and geometry DRAW formats, IGES, and STEP) and extension (all others) |
| 2277 | proc _check_file_format {file} { |
| 2278 | set fd [open $file rb] |
| 2279 | set line [read $fd 1024] |
| 2280 | close $fd |
| 2281 | |
| 2282 | set warn f |
| 2283 | set ext [file extension $file] |
| 2284 | set format unknown |
| 2285 | if { [regexp {^DBRep_DrawableShape} $line] } { |
| 2286 | set format BREP |
| 2287 | if { "$ext" != ".brep" && "$ext" != ".rle" && |
| 2288 | "$ext" != ".draw" && "$ext" != "" } { |
| 2289 | set warn t |
| 2290 | } |
| 2291 | } elseif { [regexp {^DrawTrSurf_} $line] } { |
| 2292 | set format DRAW |
| 2293 | if { "$ext" != ".rle" && |
| 2294 | "$ext" != ".draw" && "$ext" != "" } { |
| 2295 | set warn t |
| 2296 | } |
| 2297 | } elseif { [regexp {^[ \t]*ISO-10303-21} $line] } { |
| 2298 | set format STEP |
| 2299 | if { "$ext" != ".step" && "$ext" != ".stp" } { |
| 2300 | set warn t |
| 2301 | } |
| 2302 | } elseif { [regexp {^.\{72\}S[0 ]\{6\}1} $line] } { |
| 2303 | set format IGES |
| 2304 | if { "$ext" != ".iges" && "$ext" != ".igs" } { |
| 2305 | set warn t |
| 2306 | } |
| 2307 | } elseif { "$ext" == ".igs" } { |
| 2308 | set format IGES |
| 2309 | } elseif { "$ext" == ".stp" } { |
| 2310 | set format STEP |
| 2311 | } else { |
| 2312 | set format [string toupper [string range $ext 1 end]] |
| 2313 | } |
| 2314 | |
| 2315 | if { $warn } { |
| 2316 | puts "$file: Warning: extension ($ext) does not match format ($format)" |
| 2317 | } |
| 2318 | |
| 2319 | return $format |
| 2320 | } |
| 2321 | |
| 2322 | # procedure to load file knowing its format |
| 2323 | proc load_data_file {file format shape} { |
| 2324 | switch $format { |
| 6d368502 |
2325 | BREP { uplevel restore $file $shape } |
| 2326 | DRAW { uplevel restore $file $shape } |
| 2327 | IGES { pload XSDRAW; uplevel igesbrep $file $shape * } |
| 2328 | STEP { pload XSDRAW; uplevel stepread $file __a *; uplevel renamevar __a_1 $shape } |
| 2329 | STL { pload XSDRAW; uplevel readstl $shape $file } |
| 2330 | default { error "Cannot read $format file $file" } |
| 351bbcba |
2331 | } |
| 2332 | } |
| 60874ff8 |
2333 | |
| 2334 | # procedure to get name of temporary directory, |
| 2335 | # ensuring it is existing and writeable |
| 2336 | proc _get_temp_dir {} { |
| 723754e2 |
2337 | global env tcl_platform |
| 60874ff8 |
2338 | |
| 2339 | # check typical environment variables |
| 2340 | foreach var {TempDir Temp Tmp} { |
| 2341 | # check different case |
| 2342 | foreach name [list [string toupper $var] $var [string tolower $var]] { |
| 2343 | if { [info exists env($name)] && [file isdirectory $env($name)] && |
| 2344 | [file writable $env($name)] } { |
| 2345 | return [regsub -all {\\} $env($name) /] |
| 2346 | } |
| 2347 | } |
| 2348 | } |
| 2349 | |
| 2350 | # check platform-specific locations |
| 2351 | set fallback tmp |
| 2352 | if { "$tcl_platform(platform)" == "windows" } { |
| 2353 | set paths "c:/TEMP c:/TMP /TEMP /TMP" |
| 2354 | if { [info exists env(HOMEDRIVE)] && [info exists env(HOMEPATH)] } { |
| 338434c7 |
2355 | set fallback [regsub -all {\\} "$env(HOMEDRIVE)$env(HOMEPATH)/tmp" /] |
| 60874ff8 |
2356 | } |
| 2357 | } else { |
| 2358 | set paths "/tmp /var/tmp /usr/tmp" |
| 2359 | if { [info exists env(HOME)] } { |
| 2360 | set fallback "$env(HOME)/tmp" |
| 2361 | } |
| 2362 | } |
| 2363 | foreach dir $paths { |
| 723754e2 |
2364 | if { [file isdirectory $dir] && [file writable $dir] } { |
| 60874ff8 |
2365 | return $dir |
| 2366 | } |
| 2367 | } |
| 2368 | |
| 2369 | # fallback case: use subdir /tmp of home or current dir |
| 2370 | file mkdir $fallback |
| 2371 | return $fallback |
| 2372 | } |
| 9753e6de |
2373 | |
| 2374 | # extract of code from testgrid command used to process jobs running in |
| 2375 | # parallel until number of jobs in the queue becomes equal or less than |
| 2376 | # specified value |
| 2377 | proc _testgrid_process_jobs {worker {nb_ok 0}} { |
| 2378 | # bind local vars to variables of the caller procedure |
| 2379 | upvar log log |
| 2380 | upvar logdir logdir |
| 2381 | upvar job_def job_def |
| 2382 | upvar nbpooled nbpooled |
| 2383 | upvar userbreak userbreak |
| 2384 | upvar refresh refresh |
| 2385 | upvar refresh_timer refresh_timer |
| 2386 | |
| 2387 | catch {tpool::resume $worker} |
| 2388 | while { ! $userbreak && $nbpooled > $nb_ok } { |
| 2389 | foreach job [tpool::wait $worker [array names job_def]] { |
| 2390 | eval _log_test_case \[tpool::get $worker $job\] $job_def($job) log |
| 2391 | unset job_def($job) |
| 2392 | incr nbpooled -1 |
| 2393 | } |
| 2394 | |
| 2395 | # check for user break |
| 2396 | if { "[info commands dbreak]" == "dbreak" && [catch dbreak] } { |
| 2397 | set userbreak 1 |
| 2398 | } |
| 2399 | |
| 2400 | # update summary log with requested period |
| 2401 | if { $logdir != "" && $refresh > 0 && [clock seconds] > $refresh_timer + $refresh } { |
| 6d368502 |
2402 | _log_summarize $logdir $log |
| 2403 | set refresh_timer [clock seconds] |
| 9753e6de |
2404 | } |
| 2405 | } |
| 2406 | catch {tpool::suspend $worker} |
| 2407 | } |
| ccadc126 |
2408 | |
| 2409 | help checkcolor { |
| 2410 | Check pixel color. |
| 2411 | Use: checkcolor x y red green blue |
| 2412 | x y - pixel coordinates |
| 2413 | red green blue - expected pixel color (values from 0 to 1) |
| 2414 | Function check color with tolerance (5x5 area) |
| 2415 | } |
| 2416 | # Procedure to check color using command vreadpixel with tolerance |
| 2417 | proc checkcolor { coord_x coord_y rd_get gr_get bl_get } { |
| 2418 | puts "Coordinate x = $coord_x" |
| 2419 | puts "Coordinate y = $coord_y" |
| 2420 | puts "RED color of RGB is $rd_get" |
| 2421 | puts "GREEN color of RGB is $gr_get" |
| 2422 | puts "BLUE color of RGB is $bl_get" |
| 2423 | |
| 2424 | if { $coord_x <= 1 || $coord_y <= 1 } { |
| 6d368502 |
2425 | puts "Error : minimal coordinate is x = 2, y = 2. But we have x = $coord_x y = $coord_y" |
| 2426 | return -1 |
| ccadc126 |
2427 | } |
| 2428 | |
| 2429 | set color "" |
| 2430 | catch { [set color "[vreadpixel ${coord_x} ${coord_y} rgb]"] } |
| 2431 | if {"$color" == ""} { |
| 6d368502 |
2432 | puts "Error : Pixel coordinates (${position_x}; ${position_y}) are out of view" |
| ccadc126 |
2433 | } |
| 2434 | set rd [lindex $color 0] |
| 2435 | set gr [lindex $color 1] |
| 2436 | set bl [lindex $color 2] |
| 2437 | set rd_int [expr int($rd * 1.e+05)] |
| 2438 | set gr_int [expr int($gr * 1.e+05)] |
| 2439 | set bl_int [expr int($bl * 1.e+05)] |
| 2440 | set rd_ch [expr int($rd_get * 1.e+05)] |
| 2441 | set gr_ch [expr int($gr_get * 1.e+05)] |
| 2442 | set bl_ch [expr int($bl_get * 1.e+05)] |
| 2443 | |
| 2444 | if { $rd_ch != 0 } { |
| 6d368502 |
2445 | set tol_rd [expr abs($rd_ch - $rd_int)/$rd_ch] |
| ccadc126 |
2446 | } else { |
| 6d368502 |
2447 | set tol_rd $rd_int |
| ccadc126 |
2448 | } |
| 2449 | if { $gr_ch != 0 } { |
| 6d368502 |
2450 | set tol_gr [expr abs($gr_ch - $gr_int)/$gr_ch] |
| ccadc126 |
2451 | } else { |
| 6d368502 |
2452 | set tol_gr $gr_int |
| ccadc126 |
2453 | } |
| 2454 | if { $bl_ch != 0 } { |
| 6d368502 |
2455 | set tol_bl [expr abs($bl_ch - $bl_int)/$bl_ch] |
| ccadc126 |
2456 | } else { |
| 6d368502 |
2457 | set tol_bl $bl_int |
| ccadc126 |
2458 | } |
| 2459 | |
| 2460 | set status 0 |
| 2461 | if { $tol_rd > 0.2 } { |
| 6d368502 |
2462 | puts "Warning : RED light of additive color model RGB is invalid" |
| 2463 | set status 1 |
| ccadc126 |
2464 | } |
| 2465 | if { $tol_gr > 0.2 } { |
| 6d368502 |
2466 | puts "Warning : GREEN light of additive color model RGB is invalid" |
| 2467 | set status 1 |
| ccadc126 |
2468 | } |
| 2469 | if { $tol_bl > 0.2 } { |
| 6d368502 |
2470 | puts "Warning : BLUE light of additive color model RGB is invalid" |
| 2471 | set status 1 |
| ccadc126 |
2472 | } |
| 2473 | |
| 2474 | if { $status != 0 } { |
| 6d368502 |
2475 | puts "Warning : Colors of default coordinate are not equal" |
| ccadc126 |
2476 | } |
| 2477 | |
| 2478 | global stat |
| 2479 | if { $tol_rd > 0.2 || $tol_gr > 0.2 || $tol_bl > 0.2 } { |
| 6d368502 |
2480 | set info [_checkpoint $coord_x $coord_y $rd_ch $gr_ch $bl_ch] |
| 2481 | set stat [lindex $info end] |
| 2482 | if { ${stat} != 1 } { |
| 2483 | puts "Error : Colors are not equal in default coordinate and in the near coordinates too" |
| 2484 | return $stat |
| 2485 | } else { |
| 2486 | puts "Point with valid color was found" |
| 2487 | return $stat |
| 2488 | } |
| ccadc126 |
2489 | } else { |
| 6d368502 |
2490 | set stat 1 |
| ccadc126 |
2491 | } |
| 2492 | } |
| 2493 | |
| 2494 | # Procedure to check color in the point near default coordinate |
| 2495 | proc _checkpoint {coord_x coord_y rd_ch gr_ch bl_ch} { |
| 2496 | set x_start [expr ${coord_x} - 2] |
| 2497 | set y_start [expr ${coord_y} - 2] |
| 2498 | set mistake 0 |
| 2499 | set i 0 |
| 2500 | while { $mistake != 1 && $i <= 5 } { |
| 6d368502 |
2501 | set j 0 |
| 2502 | while { $mistake != 1 && $j <= 5 } { |
| 2503 | set position_x [expr ${x_start} + $j] |
| 2504 | set position_y [expr ${y_start} + $i] |
| 2505 | puts $position_x |
| 2506 | puts $position_y |
| 2507 | |
| 2508 | set color "" |
| 2509 | catch { [set color "[vreadpixel ${position_x} ${position_y} rgb]"] } |
| 2510 | if {"$color" == ""} { |
| 2511 | puts "Warning : Pixel coordinates (${position_x}; ${position_y}) are out of view" |
| 2512 | incr j |
| 2513 | continue |
| 2514 | } |
| 2515 | set rd [lindex $color 0] |
| 2516 | set gr [lindex $color 1] |
| 2517 | set bl [lindex $color 2] |
| 2518 | set rd_int [expr int($rd * 1.e+05)] |
| 2519 | set gr_int [expr int($gr * 1.e+05)] |
| 2520 | set bl_int [expr int($bl * 1.e+05)] |
| 2521 | |
| 2522 | if { $rd_ch != 0 } { |
| 2523 | set tol_rd [expr abs($rd_ch - $rd_int)/$rd_ch] |
| 2524 | } else { |
| 2525 | set tol_rd $rd_int |
| 2526 | } |
| 2527 | if { $gr_ch != 0 } { |
| 2528 | set tol_gr [expr abs($gr_ch - $gr_int)/$gr_ch] |
| 2529 | } else { |
| 2530 | set tol_gr $gr_int |
| 2531 | } |
| 2532 | if { $bl_ch != 0 } { |
| 2533 | set tol_bl [expr abs($bl_ch - $bl_int)/$bl_ch] |
| 2534 | } else { |
| 2535 | set tol_bl $bl_int |
| 2536 | } |
| 2537 | |
| 2538 | if { $tol_rd > 0.2 || $tol_gr > 0.2 || $tol_bl > 0.2 } { |
| 2539 | puts "Warning : Point with true color was not found near default coordinates" |
| 2540 | set mistake 0 |
| 2541 | } else { |
| 2542 | set mistake 1 |
| 2543 | } |
| ccadc126 |
2544 | incr j |
| 6d368502 |
2545 | } |
| 2546 | incr i |
| ccadc126 |
2547 | } |
| 2548 | return $mistake |
| 2549 | } |
| a2f76b15 |
2550 | |
| 2551 | # Procedure to check if sequence of values in listval follows linear trend |
| 2552 | # adding the same delta on each step. |
| 2553 | # |
| 2554 | # The function does statistical estimation of the mean variation of the |
| 2555 | # values of the sequence, and dispersion, and returns true only if both |
| 2556 | # dispersion and deviation of the mean from expected delta are within |
| 2557 | # specified tolerance. |
| 2558 | # |
| 2559 | # If mean variation differs from expected delta on more than two dispersions, |
| 2560 | # the check fails and procedure raises error with specified message. |
| 2561 | # |
| 2562 | # Otherwise the procedure returns false meaning that more iterations are needed. |
| 2563 | # Note that false is returned in any case if length of listval is less than 3. |
| 2564 | # |
| 2565 | # See example of use to check memory leaks in bugs/caf/bug23489 |
| 2566 | # |
| 2567 | proc checktrend {listval delta tolerance message} { |
| 2568 | set nbval [llength $listval] |
| 2569 | if { $nbval < 3} { |
| 2570 | return 0 |
| 2571 | } |
| 2572 | |
| 2573 | # calculate mean value |
| 2574 | set mean 0. |
| 2575 | set prev [lindex $listval 0] |
| 2576 | foreach val [lrange $listval 1 end] { |
| 2577 | set mean [expr $mean + ($val - $prev)] |
| 2578 | set prev $val |
| 2579 | } |
| 2580 | set mean [expr $mean / ($nbval - 1)] |
| 2581 | |
| 2582 | # calculate dispersion |
| 2583 | set sigma 0. |
| 2584 | set prev [lindex $listval 0] |
| 2585 | foreach val [lrange $listval 1 end] { |
| 2586 | set d [expr ($val - $prev) - $mean] |
| 2587 | set sigma [expr $sigma + $d * $d] |
| 2588 | set prev $val |
| 2589 | } |
| 2590 | set sigma [expr sqrt ($sigma / ($nbval - 2))] |
| 2591 | |
| 2592 | puts "Checking trend: nb = $nbval, mean delta = $mean, sigma = $sigma" |
| 2593 | |
| 2594 | # check if deviation is definitely too big |
| 2595 | if { abs ($mean - $delta) > $tolerance + 2. * $sigma } { |
| 2596 | puts "Checking trend failed: mean delta per step = $mean, sigma = $sigma, expected delta = $delta" |
| 2597 | error "$message" |
| 2598 | } |
| 2599 | |
| 2600 | # check if deviation is clearly within a range |
| 2601 | return [expr abs ($mean - $delta) <= $sigma && $sigma <= $tolerance] |
| 2602 | } |
projects / occt.git / blame