Found via `codespell -q 3 -S "*.fr" -L aadd,abnd,abord,acces,acount,adn,afile,aline,alo,alocation,alog,als,anc,ane,anid,anormal,anout,ans,anumber,aother,aparent,apoints,aprogram,asender,asign,asnd,ba,bbuild,bloc,bord,bu,caf,cas,childrens,childs,classe,clen,commun,cylindre,discret,don,dout,dum,ede,enew,entite,entites,extrem,fo,fonction,geometrie,guid,hilight,hilights,hist,identic,ii,indx,inout,invalide,ist,iterm,llength,lod,maked,mape,mke,modeling,methode,mye,myu,nam,nd,nin,normale,normales,ons,parametre,parametres,periode,pinter,pres,projet,remplace,reste,resul,secont,serie,siz,shs,slin,som,somme,syntaxe,sur,te,thei,theis,ther,theres,thes,thev,thex,thet,tol,transfert,unhilight,unhilights,va,vas,verifie,vertexes,weight`
**Example:**
~~~~{.php}
-# erase eveerything with a name starting with c_
+# erase everything with a name starting with c_
foreach var [directory c_*] {erase $var}
# clear 2d views
}
else
{
- // previously detected object is unhilighted if it is not selected or hilighted
+ // previously detected object is unhighlighted if it is not selected or highlighted
// with selection color if it is selected
aStatus = AIS_SOD_Nothing;
if (myAutoHilight && !myLastPicked.IsNull() && myLastPicked->HasSelectable())
return myStyles[Prs3d_TypeOfHighlight_Dynamic];
}
- //! Setup the style of dynamic highlighting corrsponding to Prs3d_TypeOfHighlight_Selected.
+ //! Setup the style of dynamic highlighting corresponding to Prs3d_TypeOfHighlight_Selected.
//! This is just a short-cut to SetHighlightStyle(Prs3d_TypeOfHighlight_Dynamic,theStyle).
void SetHighlightStyle(const Handle(Prs3d_Drawer)& theStyle)
{
myStyles[Prs3d_TypeOfHighlight_Dynamic] = theStyle;
}
- //! Returns current selection style settings corrsponding to Prs3d_TypeOfHighlight_Selected.
+ //! Returns current selection style settings corresponding to Prs3d_TypeOfHighlight_Selected.
//! This is just a short-cut to HighlightStyle(Prs3d_TypeOfHighlight_Selected).
const Handle(Prs3d_Drawer)& SelectionStyle() const
{
const Handle(Prs3d_Drawer)& theStyle,
const Standard_Boolean theToUpdateViewer);
- //! Removes hilighting from the Object.
+ //! Removes highlighting from the Object.
Standard_EXPORT void Unhilight(const Handle(AIS_InteractiveObject)& theIObj,
const Standard_Boolean theToUpdateViewer);
public:
DEFINE_STANDARD_ALLOC
- //! Adds Draw commands to the draw interpretor.
+ //! Adds Draw commands to the draw interpreter.
Standard_EXPORT static void Commands(Draw_Interpretor& theDI);
//! Plugin entry point function.
DEFINE_STANDARD_ALLOC
//! (Re)Load a Draw Harness plugin.
- //! @param[in][out] theDI Tcl interpretor to append loaded commands
+ //! @param[in][out] theDI Tcl interpreter to append loaded commands
//! @param[in] theKey plugin code name to be resolved in resource file
//! @param[in] theResourceFileName description file name
//! @param[in] theDefaultsDirectory default folder for looking description file
//! Sets a numeric variable.
Standard_EXPORT static void Set(const Standard_CString Name, const Standard_Real val);
- //! Returns main DRAW interpretor.
+ //! Returns main DRAW interpreter.
Standard_EXPORT static Draw_Interpretor& GetInterpretor();
//! Returns a variable value.
Draw_Interpretor::CallBackData* theCallback,
const Standard_CString theGroup)
{
- Standard_ASSERT_RAISE(myInterp != NULL, "Attempt to add command to Null interpretor");
+ Standard_ASSERT_RAISE(myInterp != NULL, "Attempt to add command to Null interpreter");
Tcl_CreateCommand(myInterp, theCommandName, CommandCmd, (ClientData)theCallback, CommandDelete);
class TCollection_AsciiString;
class TCollection_ExtendedString;
-//! Provides an encapsulation of the TCL interpretor to define Draw commands.
+//! Provides an encapsulation of the TCL interpreter to define Draw commands.
class Draw_Interpretor
{
Standard_Integer theArgNb,
const char** theArgVec) = 0;
- Draw_Interpretor* myDI; //!< pointer to Draw Interpretor
+ Draw_Interpretor* myDI; //!< pointer to Draw Interpreter
// make sure allocation and de-allocation is done by the same memory allocator
DEFINE_STANDARD_ALLOC
//! Empty constructor
Standard_EXPORT Draw_Interpretor();
- //! Initialize TCL interpretor
+ //! Initialize TCL interpreter
Standard_EXPORT void Init();
//! Creates a new command with name <theCommandName>, help string <theHelp> in group <theGroup>.
{
DEFINE_STANDARD_RTTIEXT(Draw_Printer, Message_Printer)
public:
- //! Creates a printer connected to the interpretor.
+ //! Creates a printer connected to the interpreter.
Standard_EXPORT Draw_Printer(Draw_Interpretor& theTcl);
protected:
// MKV 29.03.05
static char* tracevar(ClientData CD, Tcl_Interp*, const char* name, const char*, int)
{
- // protect if the map was destroyed before the interpretor
+ // protect if the map was destroyed before the interpreter
if (Draw::Drawables().IsEmpty())
{
return NULL;
ResetStdChannel(TCL_STDERR);
#if (TCL_MAJOR_VERSION > 8) || ((TCL_MAJOR_VERSION == 8) && (TCL_MINOR_VERSION >= 5))
- // Plain Tcl (8.6.4+) initializes interpretor channels automatically, but
+ // Plain Tcl (8.6.4+) initializes interpreter channels automatically, but
// ActiveState Tcl (at least 8.6.4) does not seem to do that, so channels
- // need to be set into interpretor explicitly
+ // need to be set into interpreter explicitly
{
Tcl_Channel aChannelIn = Tcl_GetStdChannel(TCL_STDIN);
Tcl_Channel aChannelOut = Tcl_GetStdChannel(TCL_STDOUT);
}
}
else
- { // On segmente le resultat
+ { // We segment the result
Handle(Geom2d_TrimmedCurve) TC;
Handle(Geom2d_Curve) aCCheck = CurvePtr;
TColStd_Array1OfReal Param_de_decoupeC3(1, NbIntervalC3 + 1);
Curve.Intervals(Param_de_decoupeC3, GeomAbs_C3);
- // Note extension of the parameteric range
- // Pour forcer le Trim au premier appel de l'evaluateur
+ // Note extension of the parametric range
+ // To force Trim on first evaluator call
GeomLib_CurveOnSurfaceEvaluator ev(Curve, FirstParameter - 1., LastParameter + 1.);
// Approximation avec decoupe preferentiel
//! @param[in] Interval2 second interval to fuse
//! @param[in] Confision tolerance to compare intervals
//! @param[in] IsAdjustToFirstInterval flag to set method of fusion, if intervals are close
- //! if false, intervals are fusing by half-division methdod
+ //! if false, intervals are fusing by half-division method
//! if true, intervals are fusing by selecting value from Interval1
//! @param[out] Fusion output interval
Standard_EXPORT static void FuseIntervals(
}
else
{
- // add point, set correxponding status: to be corrected later
+ // add point, set corresponding status: to be corrected later
Standard_Boolean ToAdd = Standard_False;
if (aLinOn2S->NbPoints() == 0)
{
//! Returns True if <ent> is an Unknown Entity for the Norm, i.e.
//! same Type as them created by method UnknownEntity
- //! (for an Entity out of the Norm, answer can be unpredicable)
+ //! (for an Entity out of the Norm, answer can be unpredictable)
Standard_EXPORT virtual Standard_Boolean IsUnknownEntity(
const Handle(Standard_Transient)& ent) const = 0;
class Interface_ReportEntity;
DEFINE_STANDARD_HANDLE(Interface_ReportEntity, Standard_Transient)
-//! A ReportEntity is produced to aknowledge and memorize the
+//! A ReportEntity is produced to acknowledge and memorize the
//! binding between a Check and an Entity. The Check can bring
//! Fails (+ Warnings if any), or only Warnings. If it is empty,
//! the Report Entity is for an Unknown Entity.
//=================================================================================================
-// Added, cause invoke ShapeAnalysis leads to cyclic dependancy.
+// Added, cause invoke ShapeAnalysis leads to cyclic dependency.
static Standard_Real AdjustByPeriod(const Standard_Real Val,
const Standard_Real ToVal,
const Standard_Real Period)
sae.PCurve(edge, face, c2d, a, b, Standard_True);
if (Abs(a - param) < 0.01 * preci || Abs(b - param) < 0.01 * preci)
return Standard_False;
- // check distanse between edge and new vertex
+ // check distance between edge and new vertex
gp_Pnt P1;
TopLoc_Location L;
if (BRep_Tool::SameParameter(edge) && !BRep_Tool::Degenerated(edge))
{
a1NB = Standard_True;
break;
- } // lost only 1 neigbour
+ } // lost only 1 neighbour
}
else if (aS.ShapeType() == TopAbs_FACE)
{
{
a1NB = Standard_True;
break;
- } // lost only 1 neigbour
+ } // lost only 1 neighbour
}
}
}
{
#ifdef OCCT_DEBUG
std::cout
- << "TPrsStd_ConstraintTools::ComputePerpendicular: at leat two constraintes are needed"
+ << "TPrsStd_ConstraintTools::ComputePerpendicular: at least two constraints are needed"
<< std::endl;
#endif
NullifyAIS(anAIS);
if (nbgeom < 2)
{
#ifdef OCCT_DEBUG
- std::cout << "TPrsStd_ConstraintTools::ComputeParallel: at least 2 constraintes are needed"
+ std::cout << "TPrsStd_ConstraintTools::ComputeParallel: at least 2 constraints are needed"
<< std::endl;
#endif
NullifyAIS(anAIS);
if (nbgeom < 3)
{
#ifdef OCCT_DEBUG
- std::cout << "TPrsStd_ConstraintTools::ComputeSymmetry: at least 3 constraintes are needed"
+ std::cout << "TPrsStd_ConstraintTools::ComputeSymmetry: at least 3 constraints are needed"
<< std::endl;
#endif
NullifyAIS(anAIS);
if (nbgeom < 2)
{
#ifdef OCCT_DEBUG
- std::cout << "TPrsStd_ConstraintTools::ComputeTangent: at leat two constraintes are needed"
+ std::cout << "TPrsStd_ConstraintTools::ComputeTangent: at least two constraints are needed"
<< std::endl;
#endif
NullifyAIS(anAIS);
if (nbgeom < 2)
{
throw Standard_ProgramError(
- "TPrsStd_ConstraintTools::ComputeConcentric: at least 2 constraintes are needed");
+ "TPrsStd_ConstraintTools::ComputeConcentric: at least 2 constraints are needed");
}
if (!aConst->IsPlanar())
{
if (nbgeom < 2)
{
#ifdef OCCT_DEBUG
- std::cout << "TPrsStd_ConstraintTools::ComputeCoincident: at leat two constraintes are needed"
+ std::cout << "TPrsStd_ConstraintTools::ComputeCoincident: at least two constraints are needed"
<< std::endl;
#endif
NullifyAIS(anAIS);
if (nbgeom < 1)
{
#ifdef OCCT_DEBUG
- std::cout << "TPrsStd_ConstraintTools::ComputeRound: at leat one geometry is needed"
+ std::cout << "TPrsStd_ConstraintTools::ComputeRound: at least one geometry is needed"
<< std::endl;
#endif
NullifyAIS(anAIS);
#undef OPTIM_UPDATE // If this variable is defined there will be done
-// more otimized update of AIS_Shape. If an object was
-// erased in the viewer and it's location was changed
+// more optimized update of AIS_Shape. If an object was
+// erased in the viewer and its location was changed
// but topological data wasn't then when displayed only
// the object's presentation will be moved to new location
// without recompute. The shape in AIS_Shape will
//! Returns the contained value
Standard_EXPORT const TopoDS_Shape& Value() const;
- //! Specific testof equality : defined as False if <other> has
+ //! Specific test of equality : defined as False if <other> has
//! not the same true Type, else contents are compared (by
//! C++ operator ==)
Standard_EXPORT Standard_Boolean
Standard_EXPORT Standard_Boolean GetCapping(const TDF_Label& theClippingPlaneL) const;
//! Get capping value for given clipping plane label
- //! Return true if Label is valid abd capping is exist.
+ //! Return true if Label is valid and capping exists.
Standard_EXPORT Standard_Boolean GetCapping(const TDF_Label& theClippingPlaneL,
Standard_Boolean& theCapping) const;
LoadSession();
// skl: we make remove commands "x" and "exit" in order to this commands are
- // performed not in IFSelect_SessionPilot but in standard Tcl interpretor
+ // performed not in IFSelect_SessionPilot but in standard Tcl interpreter
XSDRAW::RemoveCommand("x");
XSDRAW::RemoveCommand("exit");
regexp { +Vertex +: +Min +[-0-9.+eE]+ +Max +([-0-9.+eE]+)} [ maxtolerance d ] full toler
set good_dist 0
if { [expr abs( ${dist} - ${good_dist} )] > ${toler} } {
- puts "Faulty : the distanse is ${dist}. It is bad value"
+ puts "Faulty : the distance is ${dist}. It is bad value"
}
# 2
regexp { +Vertex +: +Min +[-0-9.+eE]+ +Max +([-0-9.+eE]+)} [ maxtolerance d ] full toler
set good_dist 3.99072821948773e-08
if { [expr abs( ${dist} - ${good_dist} )] > ${toler} } {
- puts "Error : the distanse is ${dist}. It is bad value"
+ puts "Error : the distance is ${dist}. It is bad value"
}
smallview
set log [projponf f $pnt -min -t]
regexp {proj dist = ([-0-9.+eE]+)} ${log} full distmax
if { ${distmax} > ${CMP_TOL} } {
- puts "Error: Wrong distanse ($pnt)"
+ puts "Error: Wrong distance ($pnt)"
} else {
- puts "OK: Good distanse ($pnt)"
+ puts "OK: Good distance ($pnt)"
}
}
//! Returns item information(short) for display role.
//! \param theIndex a model index
//! \param theRole a view role
- //! \return value intepreted depending on the given role
+ //! \return value interpreted depending on the given role
Standard_EXPORT virtual QVariant Data(const int theRow,
const int theColumn,
int theRole = Qt::DisplayRole) const Standard_OVERRIDE
projects / occt.git / commitdiff