AIS_LengthDimension interface was extended to allow setting a custom dimension direction.
The value of dimension in this case is equal to projection of the distance between dimension attributes(points) to this direction.
vlengthparam command is implemented to set custom length direction in DRAW.
vdimparam dim1 -autovalue
~~~~~
-@subsubsection occt_draw_4_4_22 vdimangleparam
+@subsubsection occt_draw_4_4_22 vangleparam
Syntax:
~~~~~
vangleparam dim1 -type exterior -showarrow first
~~~~~
-@subsubsection occt_draw_4_4_23 vmovedim
+@subsubsection occt_draw_4_4_23 vlengthparam
+
+Syntax:
+~~~~~
+vlengthparam name [-type interior|exterior]
+ [-showarrow first|second|both|none]
+~~~~~
+
+Sets parameters for length dimension **name**.
+
+**Example:**
+~~~~~
+vinit
+vpoint p1 20 20 0
+vpoint p2 80 80 0
+vdimension dim1 -length -plane xoy -shapes p1 p2
+vtop
+vfit
+vzoom 0.5
+vlengthparam dim1 -direction ox
+~~~~~
+
+@subsubsection occt_draw_4_4_24 vmovedim
Syntax:
~~~~~
FitTextAlignmentForLinear (theFirstPoint, theSecondPoint, theIsOneSide, aHorisontalTextPos,
aLabelPosition, isArrowsExternal);
- // compute dimension line points
- gp_Ax1 aPlaneNormal = GetPlane().Axis();
- gp_Dir aTargetPointsVector = gce_MakeDir (theFirstPoint, theSecondPoint);
-
- // compute flyout direction vector
- gp_Dir aFlyoutVector = aPlaneNormal.Direction() ^ aTargetPointsVector;
-
- // create lines for layouts
- gp_Lin aLine1 (theFirstPoint, aFlyoutVector);
- gp_Lin aLine2 (theSecondPoint, aFlyoutVector);
-
- // Get flyout end points
- gp_Pnt aLineBegPoint = ElCLib::Value (ElCLib::Parameter (aLine1, theFirstPoint) + GetFlyout(), aLine1);
- gp_Pnt aLineEndPoint = ElCLib::Value (ElCLib::Parameter (aLine2, theSecondPoint) + GetFlyout(), aLine2);
-
+ // compute dimension line points
+ gp_Pnt aLineBegPoint, aLineEndPoint;
+ ComputeFlyoutLinePoints (theFirstPoint, theSecondPoint, aLineBegPoint, aLineEndPoint);
gp_Lin aDimensionLine = gce_MakeLin (aLineBegPoint, aLineEndPoint);
// compute arrows positions and directions
mySelectionGeom.IsComputed = Standard_True;
}
+//=======================================================================
+//function : ComputeFlyoutLinePoints
+//purpose :
+//=======================================================================
+void AIS_Dimension::ComputeFlyoutLinePoints (const gp_Pnt& theFirstPoint, const gp_Pnt& theSecondPoint,
+ gp_Pnt& theLineBegPoint, gp_Pnt& theLineEndPoint)
+{
+ // compute dimension line points
+ gp_Ax1 aPlaneNormal = GetPlane().Axis();
+ // compute flyout direction vector
+ gp_Dir aTargetPointsVector = gce_MakeDir (theFirstPoint, theSecondPoint);
+ gp_Dir aFlyoutVector = aPlaneNormal.Direction() ^ aTargetPointsVector;
+ // create lines for layouts
+ gp_Lin aLine1 (theFirstPoint, aFlyoutVector);
+ gp_Lin aLine2 (theSecondPoint, aFlyoutVector);
+
+ // Get flyout end points
+ theLineBegPoint = ElCLib::Value (ElCLib::Parameter (aLine1, theFirstPoint) + GetFlyout(), aLine1);
+ theLineEndPoint = ElCLib::Value (ElCLib::Parameter (aLine2, theSecondPoint) + GetFlyout(), aLine2);
+}
+
//=======================================================================
//function : ComputeLinearFlyouts
//purpose :
const gp_Pnt& theSecondPoint,
const Standard_Boolean theIsOneSide = Standard_False);
+ //! Computes points bounded the flyout line for linear dimension.
+ //! @param theFirstPoint [in] the first attach point of linear dimension.
+ //! @param theSecondPoint [in] the second attach point of linear dimension.
+ //! @param theLineBegPoint [out] the first attach point of linear dimension.
+ //! @param theLineEndPoint [out] the second attach point of linear dimension.
+ Standard_EXPORT virtual void ComputeFlyoutLinePoints (const gp_Pnt& theFirstPoint, const gp_Pnt& theSecondPoint,
+ gp_Pnt& theLineBegPoint, gp_Pnt& theLineEndPoint);
+
//! Compute selection sensitives for linear dimension flyout lines (length, diameter, radius).
//! Please note that this method uses base dimension properties: working plane and flyout length.
//! @param theSelection [in] the selection structure to fill with selection primitives.
//=======================================================================
AIS_LengthDimension::AIS_LengthDimension (const TopoDS_Face& theFirstFace,
const TopoDS_Face& theSecondFace)
-: AIS_Dimension (AIS_KOD_LENGTH)
+: AIS_Dimension (AIS_KOD_LENGTH),
+ myHasCustomDirection (Standard_False)
{
SetMeasuredGeometry (theFirstFace, theSecondFace);
SetFlyout (15.0);
//=======================================================================
AIS_LengthDimension::AIS_LengthDimension (const TopoDS_Face& theFace,
const TopoDS_Edge& theEdge)
-: AIS_Dimension (AIS_KOD_LENGTH)
+: AIS_Dimension (AIS_KOD_LENGTH),
+ myHasCustomDirection (Standard_False)
{
SetMeasuredGeometry (theFace, theEdge);
SetFlyout (15.0);
AIS_LengthDimension::AIS_LengthDimension (const gp_Pnt& theFirstPoint,
const gp_Pnt& theSecondPoint,
const gp_Pln& thePlane)
-: AIS_Dimension (AIS_KOD_LENGTH)
+: AIS_Dimension (AIS_KOD_LENGTH),
+ myHasCustomDirection (Standard_False)
{
SetMeasuredGeometry (theFirstPoint, theSecondPoint, thePlane);
SetFlyout (15.0);
AIS_LengthDimension::AIS_LengthDimension (const TopoDS_Shape& theFirstShape,
const TopoDS_Shape& theSecondShape,
const gp_Pln& thePlane)
-: AIS_Dimension (AIS_KOD_LENGTH)
+: AIS_Dimension (AIS_KOD_LENGTH),
+ myHasCustomDirection (Standard_False)
{
SetCustomPlane (thePlane);
SetMeasuredShapes (theFirstShape, theSecondShape);
//=======================================================================
AIS_LengthDimension::AIS_LengthDimension (const TopoDS_Edge& theEdge,
const gp_Pln& thePlane)
-: AIS_Dimension (AIS_KOD_LENGTH)
+: AIS_Dimension (AIS_KOD_LENGTH),
+ myHasCustomDirection (Standard_False)
{
SetMeasuredGeometry (theEdge, thePlane);
SetFlyout (15.0);
//=======================================================================
Standard_Real AIS_LengthDimension::ComputeValue() const
{
- return IsValid() ? myFirstPoint.Distance (mySecondPoint) : 0.0;
+ if (!IsValid())
+ return 0.0;
+
+ if (!myHasCustomDirection)
+ return myFirstPoint.Distance (mySecondPoint);
+
+ return fabs (gp_Vec(myFirstPoint, mySecondPoint).Dot (myDirection));
}
//=======================================================================
DrawLinearDimension (thePresentation, theMode, myFirstPoint, mySecondPoint);
}
+ //=======================================================================
+//function : ComputeFlyoutLinePoints
+//purpose :
+//=======================================================================
+void AIS_LengthDimension::ComputeFlyoutLinePoints (const gp_Pnt& theFirstPoint, const gp_Pnt& theSecondPoint,
+ gp_Pnt& theLineBegPoint, gp_Pnt& theLineEndPoint)
+{
+ if (!myHasCustomDirection)
+ {
+ AIS_Dimension::ComputeFlyoutLinePoints (theFirstPoint, theSecondPoint, theLineBegPoint, theLineEndPoint);
+ return;
+ }
+
+ // find scalar of projection target vector (from start to second point) to flyout vector
+ gp_Ax1 aPlaneNormal = GetPlane().Axis();
+ gp_Vec aFlyoutNormalizedDir(aPlaneNormal.Direction() ^ myDirection);
+ aFlyoutNormalizedDir.Normalize();
+ Standard_Real aTargetProjectedToFlyout = gp_Vec(theFirstPoint, theSecondPoint).Dot (aFlyoutNormalizedDir);
+
+ gp_Dir aFlyoutVector = aFlyoutNormalizedDir;
+ // create lines for layouts
+ gp_Lin aLine1 (theFirstPoint, aFlyoutVector);
+ gp_Lin aLine2 (theSecondPoint, aFlyoutVector);
+
+ // Get flyout end points
+ theLineBegPoint = ElCLib::Value (ElCLib::Parameter (aLine1, theFirstPoint) + GetFlyout() + aTargetProjectedToFlyout, aLine1);
+ theLineEndPoint = ElCLib::Value (ElCLib::Parameter (aLine2, theSecondPoint) + GetFlyout(), aLine2);
+}
+
//=======================================================================
//function : ComputeFlyoutSelection
//purpose :
SetToUpdate();
}
+
+//=======================================================================
+//function : SetDirection
+//purpose :
+//=======================================================================
+void AIS_LengthDimension::SetDirection (const gp_Dir& theDirection, const Standard_Boolean theUseDirection)
+{
+ myHasCustomDirection = theUseDirection;
+ if (myHasCustomDirection)
+ myDirection = theDirection;
+}
Standard_EXPORT virtual const gp_Pnt GetTextPosition() const Standard_OVERRIDE;
+ //! Set custom direction for dimension. If it is not set, the direction is obtained
+ //! from the measured geometry (e.g. line between points of dimension)
+ //! The direction does not change flyout direction of dimension.
+ //! @param theDirection [in] the dimension direction.
+ //! @param theUseDirection [in] boolean value if custom direction should be used.
+ Standard_EXPORT void SetDirection (const gp_Dir& theDirection, const Standard_Boolean theUseDirection = Standard_True);
+
public:
DEFINE_STANDARD_RTTIEXT(AIS_LengthDimension,AIS_Dimension)
Standard_EXPORT virtual gp_Pln ComputePlane(const gp_Dir& theAttachDir) const;
+ //! Computes distance between dimension points. If custom direction is defined, the distance
+ //! is a projection value of the distance between points to this direction
+ //! @return dimension value
Standard_EXPORT Standard_Real ComputeValue() const Standard_OVERRIDE;
Standard_EXPORT virtual void Compute (const Handle(PrsMgr_PresentationManager3d)& thePresentationManager,
const Handle(Prs3d_Presentation)& thePresentation,
const Standard_Integer theMode = 0) Standard_OVERRIDE;
+ //! Computes points bounded the flyout line for linear dimension.
+ //! Direction of flyout line equal to the custom direction of dimension if defined or
+ //! parallel to the main direction line
+ //! @param theFirstPoint [in] the first attach point of linear dimension.
+ //! @param theSecondPoint [in] the second attach point of linear dimension.
+ //! @param theLineBegPoint [out] the first attach point of linear dimension.
+ //! @param theLineEndPoint [out] the second attach point of linear dimension.
+ Standard_EXPORT virtual void ComputeFlyoutLinePoints (const gp_Pnt& theFirstPoint, const gp_Pnt& theSecondPoint,
+ gp_Pnt& theLineBegPoint, gp_Pnt& theLineEndPoint) Standard_OVERRIDE;
+
Standard_EXPORT virtual void ComputeFlyoutSelection (const Handle(SelectMgr_Selection)& theSelection,
const Handle(SelectMgr_EntityOwner)& theEntityOwner) Standard_OVERRIDE;
gp_Pnt mySecondPoint;
TopoDS_Shape myFirstShape;
TopoDS_Shape mySecondShape;
+ gp_Dir myDirection;
+ Standard_Boolean myHasCustomDirection;
};
#endif // _AIS_LengthDimension_HeaderFile
#include <TCollection_AsciiString.hxx>
#include <TCollection_ExtendedString.hxx>
#include <TColStd_MapOfInteger.hxx>
+#include <TColStd_SequenceOfReal.hxx>
#include <TopAbs.hxx>
#include <TopAbs_ShapeEnum.hxx>
#include <TopExp.hxx>
{
if (anIt + 1 >= theArgNum)
{
- std::cout << "Error: wrong number of values for parameter '" << aParam.ToCString() << "'.\n";
+ std::cout << "Error: wrong number of values for parameter '" << aParam << "'.\n";
return 1;
}
return 0;
}
+//=======================================================================
+//function : VLengthParam
+//purpose : Sets parameters to length dimension.
+//=======================================================================
+static int VLengthParam (Draw_Interpretor&, Standard_Integer theArgNum, const char** theArgVec)
+{
+ if (theArgNum < 3)
+ {
+ std::cout << theArgVec[0] << " error: the wrong number of input parameters.\n";
+ return 1;
+ }
+
+ TCollection_AsciiString aName (theArgVec[1]);
+ if (!GetMapOfAIS().IsBound2 (aName))
+ {
+ std::cout << theArgVec[0] << "error: no object with this name.\n";
+ return 1;
+ }
+
+ Handle(AIS_InteractiveObject) anObject = Handle(AIS_InteractiveObject)::DownCast(GetMapOfAIS().Find2 (aName));
+ if (anObject->Type() != AIS_KOI_Dimension)
+ {
+ std::cout << theArgVec[0] << "error: no dimension with this name.\n";
+ return 1;
+ }
+
+ Handle(AIS_LengthDimension) aLengthDim = Handle(AIS_LengthDimension)::DownCast (anObject);
+ if (aLengthDim.IsNull())
+ {
+ std::cout << theArgVec[0] << "error: no length dimension with this name.\n";
+ return 1;
+ }
+
+ // parse direction value
+ gp_Dir aDirection;
+ int anArgumentIt = 2;
+ TCollection_AsciiString aParam (theArgVec[anArgumentIt]);
+ aParam.LowerCase();
+
+ bool isCustomDirection = false;
+ if (aParam.IsEqual ("-direction"))
+ {
+ if (anArgumentIt + 1 >= theArgNum)
+ {
+ std::cout << "Error: "<< aParam <<" direction should have value.\n";
+ return 1;
+ }
+ anArgumentIt++;
+ isCustomDirection = Standard_True;
+ TCollection_AsciiString aValue = theArgVec[anArgumentIt];
+ aValue.LowerCase();
+ if (aValue == "ox")
+ aDirection = gp::DX();
+ else if (aValue == "oy")
+ aDirection = gp::DY();
+ else if (aValue == "oz")
+ aDirection = gp::DZ();
+ else if (aValue == "autodirection")
+ isCustomDirection = false;
+ else
+ {
+ if (anArgumentIt + 2 >= theArgNum)
+ {
+ std::cout << "Error: wrong number of values for parameter '" << aParam << "'.\n";
+ return 1;
+ }
+ // access coordinate arguments
+ TColStd_SequenceOfReal aCoords;
+ for (; anArgumentIt < theArgNum; ++anArgumentIt)
+ {
+ TCollection_AsciiString anArg (theArgVec[anArgumentIt]);
+ if (!anArg.IsRealValue())
+ {
+ break;
+ }
+ aCoords.Append (anArg.RealValue());
+ }
+ // non-numeric argument too early
+ if (aCoords.IsEmpty() || aCoords.Size() != 3)
+ {
+ std::cout << "Error: wrong number of direction arguments.\n";
+ return 1;
+ }
+ aDirection = gp_Dir (aCoords.Value (1), aCoords.Value (2), aCoords.Value (3));
+ }
+ }
+
+ aLengthDim->SetDirection (aDirection, isCustomDirection);
+ if (!aLengthDim->IsValid())
+ {
+ std::cout << "Error: Dimension geometry or plane is not valid.\n";
+ return 1;
+ }
+
+ // Redisplay a dimension after parameter changing.
+ if (ViewerTest::GetAISContext()->IsDisplayed (aLengthDim))
+ {
+ ViewerTest::GetAISContext()->Redisplay (aLengthDim, true);
+ }
+
+ return 0;
+}
+
//=======================================================================
//function : VAngleParam
//purpose : Sets aspect parameters to angle dimension.
" -See also: vmovedim, vdimension.\n",
__FILE__,VDimParam,group);
+ theCommands.Add("vlengthparam",
+ "vlengthparam name"
+ "[-direction {ox|oy|oz|x y z|autodirection}]\n"
+ " -Sets parameters for length dimension.\n"
+ " -See also: vdimparam, vdimension.\n",
+ __FILE__,VLengthParam,group);
+
theCommands.Add("vangleparam",
"vangleparam name"
"[-type interior|exterior]\n"
- "[-showarrow first|second|both|none]\n",
+ "[-showarrow first|second|both|none]\n"
+ " -Sets parameters for angle dimension.\n"
+ " -See also: vdimparam, vdimension.\n",
__FILE__,VAngleParam,group);
theCommands.Add("vmovedim",
--- /dev/null
+pload ALL
+vinit
+vtrihedron t1
+
+vpoint p11 2 22 0
+vpoint p12 7 29 0
+vdimension dim1 -length -plane xoy -shapes p11 p12
+vdimparam dim1 -flyout 1 -arrowlength 0.75 -arrow internal -label hcenter
+
+vpoint p21 22 22 0
+vpoint p22 27 29 0
+vdimension dim2 -length -plane xoy -shapes p21 p22
+vdimparam dim2 -flyout 1 -arrowlength 0.75 -arrow internal -label hcenter
+vlengthparam dim2 -direction 1 1 1
+
+vpoint p31 2 2 0
+vpoint p32 7 9 0
+vdimension dim3 -length -plane xoy -shapes p31 p32
+vdimparam dim3 -flyout 1 -arrowlength 0.75 -arrow internal -label hcenter
+vlengthparam dim3 -direction OX
+
+vpoint p41 22 2 0
+vpoint p42 27 9 0
+vdimension dim4 -length -plane xoy -shapes p41 p42
+vdimparam dim4 -flyout 1 -arrowlength 0.75 -arrow internal -label hcenter
+vlengthparam dim4 -direction OY
+
+vtop
+vfit
+vzoom 0.75
+
--- /dev/null
+pload ALL
+vinit
+vtrihedron t1
+
+vpoint p11 2 22 0
+vpoint p12 7 29 0
+vdimension dim1 -length -plane xoy -shapes p11 p12
+vdimparam dim1 -flyout -1 -arrowlength 0.75 -arrow internal -label hcenter
+
+vpoint p21 22 22 0
+vpoint p22 27 29 0
+vdimension dim2 -length -plane xoy -shapes p21 p22
+vdimparam dim2 -flyout -1 -arrowlength 0.75 -arrow internal -label hcenter
+vlengthparam dim2 -direction 1 1 1
+
+vpoint p31 2 2 0
+vpoint p32 7 9 0
+vdimension dim3 -length -plane xoy -shapes p31 p32
+vdimparam dim3 -flyout -1 -arrowlength 0.75 -arrow internal -label hcenter
+vlengthparam dim3 -direction OX
+
+vpoint p41 22 2 0
+vpoint p42 27 9 0
+vdimension dim4 -length -plane xoy -shapes p41 p42
+vdimparam dim4 -flyout -1 -arrowlength 0.75 -arrow internal -label hcenter
+vlengthparam dim4 -direction OY
+
+vtop
+vfit
+vzoom 0.75
+
--- /dev/null
+pload ALL
+vinit
+vtrihedron t1
+
+vpoint p11 2 22 0
+vpoint p12 7 29 0
+vdimension dim1 -length -plane xoy -shapes p12 p11
+vdimparam dim1 -flyout 1 -arrowlength 0.75 -arrow internal -label hcenter
+
+vpoint p21 22 22 0
+vpoint p22 27 29 0
+vdimension dim2 -length -plane xoy -shapes p22 p21
+vdimparam dim2 -flyout 1 -arrowlength 0.75 -arrow internal -label hcenter
+vlengthparam dim2 -direction 1 1 1
+
+vpoint p31 2 2 0
+vpoint p32 7 9 0
+vdimension dim3 -length -plane xoy -shapes p32 p31
+vdimparam dim3 -flyout 1 -arrowlength 0.75 -arrow internal -label hcenter
+vlengthparam dim3 -direction OX
+
+vpoint p41 22 2 0
+vpoint p42 27 9 0
+vdimension dim4 -length -plane xoy -shapes p42 p41
+vdimparam dim4 -flyout 1 -arrowlength 0.75 -arrow internal -label hcenter
+vlengthparam dim4 -direction OY
+
+vtop
+vfit
+vzoom 0.75
+
--- /dev/null
+pload ALL
+vinit
+vtrihedron t1
+
+vpoint p11 2 22 0
+vpoint p12 7 29 0
+vdimension dim1 -length -plane xoy -shapes p11 p12
+vdimparam dim1 -flyout 1 -arrowlength 0.75 -arrow internal -label hcenter
+
+vpoint p21 22 22 0
+vpoint p22 27 29 0
+vdimension dim2 -length -plane xoy -shapes p21 p22
+vdimparam dim2 -flyout 1 -arrowlength 0.75 -arrow internal -label hcenter
+vlengthparam dim2 -direction -1 -1 1
+
+vpoint p31 2 2 0
+vpoint p32 7 9 0
+vdimension dim3 -length -plane xoy -shapes p31 p32
+vdimparam dim3 -flyout 1 -arrowlength 0.75 -arrow internal -label hcenter
+vlengthparam dim3 -direction -1 0 0
+
+vpoint p41 22 2 0
+vpoint p42 27 9 0
+vdimension dim4 -length -plane xoy -shapes p41 p42
+vdimparam dim4 -flyout 1 -arrowlength 0.75 -arrow internal -label hcenter
+vlengthparam dim4 -direction 0 -1 0
+
+vtop
+vfit
+vzoom 0.75
+
--- /dev/null
+pload ALL
+vinit
+vtrihedron t1
+
+vpoint p11 2 22 0
+vpoint p12 7 29 0
+vdimension dim1 -length -plane xoy -shapes p12 p11
+vdimparam dim1 -flyout -1 -arrowlength 0.75 -arrow internal -label hcenter
+
+vpoint p21 22 22 0
+vpoint p22 27 29 0
+vdimension dim2 -length -plane xoy -shapes p22 p21
+vdimparam dim2 -flyout -1 -arrowlength 0.75 -arrow internal -label hcenter
+vlengthparam dim2 -direction 1 1 1
+
+vpoint p31 2 2 0
+vpoint p32 7 9 0
+vdimension dim3 -length -plane xoy -shapes p32 p31
+vdimparam dim3 -flyout -1 -arrowlength 0.75 -arrow internal -label hcenter
+vlengthparam dim3 -direction OX
+
+vpoint p41 22 2 0
+vpoint p42 27 9 0
+vdimension dim4 -length -plane xoy -shapes p42 p41
+vdimparam dim4 -flyout -1 -arrowlength 0.75 -arrow internal -label hcenter
+vlengthparam dim4 -direction OY
+
+vtop
+vfit
+vzoom 0.75
+
projects / occt.git / commitdiff